600ad549b5
A new time traceable flag was added to pmc agent to store the current time traceable status. This flag replaces the utc_offset_traceable flag in the HA clock selection algorithm and status command. Test plan: HA clock selection algorithm PASS: Verify the clock source which time isn't traceable is discarded by the algorithm if ha_gm_timeTraceable is enabled. PASS: Verify the clock source which time is traceable isn't discarded by the algorithm if ha_gm_timeTraceable is enabled. Regression: status command PASS: Verify the response of status command shows the correct GM time traceable. The 'valid sources' command is used to get a list of interfaces which the clock is matching the requirements. The response contains a space separated list of interfaces, or "None" when not a single clock is matching all the requirements. Test plan: valid sources command PASS: Verify that a space separated list of interface is returned when one or more clocks match the requirements. PASS: Verify that the string "None" is returned when not a single clock match the requirements. Now the GM time traceable check is enabled by default as it is an important check for both T-GM and T-BC scenarios. The GM time traceable check is controlled in configuration by using the ha_gm_timeTraceable setting, and it can be disabled using the value 0 (ha_gm_timeTraceable 0). Test plan: default value PASS Verify the check is performed by default. PASS Verify the user can disable the check by configuration. Bonus: Fixed the behavior when none clock is matching the requirements and the active clock source is disabled using the 'disable source <interface>' command. The interface is must be disabled and a new clock source is selected. Test plan: none clock is matching the requirements PASS: Verify that the active source can be disabled and a new one is selected. PASS: Verify that an attempt to disable the last active interface fails and an appopriated message is given as response. PASS: Verify that the interface with higher priority is selected after re-enabling it. PASS: Verify the active clock source doesn't change if another interface is disabled. PASS: Verify the active clock source doesn't change if another interface is re-enabled. Story: 2010723 Task: 48702 Change-Id: I64193575a995e520d36460c0ebb8dd452fa8c2b8 Signed-off-by: Andre Mauricio Zelak <andre.zelak@windriver.com>
36 lines
1.2 KiB
Diff
36 lines
1.2 KiB
Diff
From 63b43924294da6cb177d0509120b2e957580441c Mon Sep 17 00:00:00 2001
|
|
From: Miroslav Lichvar <mlichvar@redhat.com>
|
|
Date: Mon, 31 May 2021 11:07:52 +0200
|
|
Subject: [PATCH 1/54] clock: Reset state when switching port with same best clock.
|
|
|
|
When the best port is changed, but the ID of the best clock doesn't
|
|
change (e.g. a passive port is activated on link failure), reset the
|
|
current delay and other master/link-specific state to avoid the switch
|
|
throwing the clock off.
|
|
|
|
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
|
|
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
|
|
[commit 7e8eba5332671abfd95d06dd191059eded1d2cca upstream]
|
|
Signed-off-by: Jim Somerville <Jim.Somerville@windriver.com>
|
|
Signed-off-by: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
|
---
|
|
clock.c | 2 +-
|
|
1 file changed, 1 insertion(+), 1 deletion(-)
|
|
|
|
diff --git a/clock.c b/clock.c
|
|
index a66d189..96453f4 100644
|
|
--- a/clock.c
|
|
+++ b/clock.c
|
|
@@ -1857,7 +1857,7 @@ static void handle_state_decision_event(struct clock *c)
|
|
cid2str(&best_id));
|
|
}
|
|
|
|
- if (!cid_eq(&best_id, &c->best_id)) {
|
|
+ if (!cid_eq(&best_id, &c->best_id) || best != c->best) {
|
|
clock_freq_est_reset(c);
|
|
tsproc_reset(c->tsproc, 1);
|
|
if (!tmv_is_zero(c->initial_delay))
|
|
--
|
|
2.25.1
|
|
|