metal/bsp-files/kickstarts/pre_disk_aio.cfg

222 lines
9.4 KiB
INI
Executable File

## NOTE: updates to partition sizes need to be also reflected in
## - config/.../sysinv/conductor/manager.py:create_controller_filesystems()
## - config/.../sysinv/common/constants.py
##
## NOTE: When adding partitions, we currently have a max of 4 primary partitions.
## If more than 4 partitions are required, we can use a max of 3 --asprimary,
## to allow 1 primary logical partition with extended partitions
##
## NOTE: Max default PV size must align with the default controllerfs sizes
##
##
##***************************************************************************************************
## Large disk install (for disks over 240GB)
## - DB size is doubled to allow for upgrades
##
## BACKUP_OVERHEAD = 5GiB
## DEFAULT_PLATFORM_STOR_SIZE = 10GiB
## DEFAULT_DATABASE_STOR_SIZE = 10GiB
## BACKUP = DEFAULT_DATABASE_STOR_SIZE +
## DEFAULT_PLATFORM_STOR_SIZE +
## BACKUP_OVERHEAD = 25GiB
## LOG_VOL_SIZE = 8GiB
## SCRATCH_VOL_SIZE = 16GiB
## RABBIT_LV = 2GiB
## DEFAULT_EXTENSION_STOR_SIZE = 1GiB
## KUBERNETES_DOCKER_STOR_SIZE = 30GiB
## DOCKER_DISTRIBUTION_STOR_SIZE = 16GiB
## ETCD_STOR_SIZE = 5GiB
## CEPH_MON_SIZE = 20GiB
## KUBELET_STOR_SIZE = 10GiB
## DC_VAULT_SIZE = 15GiB
## RESERVED_PE = 16MiB (based on pesize=32768)
##
## CGCS_PV_SIZE = (10 + 2*10 + 25 + 8 + 16 + 2 + 1 + 30 + 16 + 5 + 20 + 10 + 15)GiB + 16MiB/1024 = 178.02GiB
##
##**********************************************************************************************************
## Small disk install - (for disks below 240GB)
## - DB size is doubled to allow for upgrades
##
## DEFAULT_PLATFORM_STOR_SIZE = 10GiB
## DEFAULT_SMALL_DATABASE_STOR_SIZE = 5GiB
## DEFAULT_SMALL_BACKUP_STOR_SIZE = 20GiB
##
## LOG_VOL_SIZE = 8GiB
## SCRATCH_VOL_SIZE = 16GiB
## RABBIT_LV = 2GiB
## DEFAULT_EXTENSION_STOR_SIZE = 1GiB
## KUBERNETES_DOCKER_STOR_SIZE = 30GiB
## DOCKER_DISTRIBUTION_STOR_SIZE = 16GiB
## ETCD_STOR_SIZE = 5GiB
## CEPH_MON_SIZE = 20GiB
## KUBELET_STOR_SIZE = 10GiB
## DC_VAULT_SIZE = 15GiB
## RESERVED_PE = 16MiB (based on pesize=32768)
##
## CGCS_PV_SIZE = (10 + 2*5 + 20 + 8 + 16 + 2 + 1 + 30 + 16 + 5 + 20 + 10 + 15)GiB + 16MiB/1024 = 163.02GiB
##
##*********************************************************************************************************
## Tiny disk install - (for disks below 154GB)
##
## NOTE: Tiny disk setup is mainly for StarlingX running in QEMU/KVM VM.
##
## DEFAULT_TINY_PLATFORM_STOR_SIZE = 1GiB
## DEFAULT_TINY_DATABASE_STOR_SIZE = 1GiB
## DEFAULT_TINY_BACKUP_STOR_SIZE = 1GiB
##
## LOG_VOL_SIZE = 3GiB
## SCRATCH_VOL_SIZE = 2GiB
## RABBIT_LV = 2GiB
## DEFAULT_EXTENSION_STOR_SIZE = 1GiB
## TINY_KUBERNETES_DOCKER_STOR_SIZE = 20GiB
## TINY_DOCKER_DISTRIBUTION_STOR_SIZE = 8GiB
## TINY_ETCD_STOR_SIZE = 1GiB
## TINY_KUBELET_STOR_SIZE = 2GiB
##
## CGCS_PV_SIZE = (1 + 2*1 + 1 + 3 + 2 + 2 + 1 + 20 + 8 + 1 + 2)GiB = 43GiB
##
## MINIMUM_TINY_DISK_SIZE = CGCS_PV_SIZE + ROOTFS_SIZE + EFI_SIZE + BOOT_SIZE + PLATFORM_BACKUP_SIZE
## = 43 + 15 + 0.3 + 0.5 + 1 = 60GiB
ROOTFS_SIZE=20000
LOG_VOL_SIZE=8000
SCRATCH_VOL_SIZE=16000
BOOT_SIZE=500
EFI_SIZE=300
PLATFORM_BACKUP_SIZE=$persistent_size
# The default disk size thresholds must align with the ones in
# config/.../sysinv/common/constants.py
# which are DEFAULT_SMALL_DISK_SIZE
# MINIMUM_SMALL_DISK_SIZE
default_small_disk_size=240
minimum_small_disk_size=196
sz=$(blockdev --getsize64 $rootfs_device)
# Round CGCS_PV_SIZE to the closest upper value that can be divided by 1024.
if [ $sz -gt $(($default_small_disk_size*$gb)) ] ; then
# Large disk: CGCS_PV_SIZE=179GiB*1024=183296
CGCS_PV_SIZE=183296
elif [ $sz -ge $(($minimum_small_disk_size*$gb)) ] ; then
# Small disk: CGCS_PV_SIZE=164GiB*1024=167936
CGCS_PV_SIZE=167936
else
# Tiny disk: CGCS_PV_SIZE=43GiB*1024=44032
# Using a disk with a size under 60GiB will fail.
CGCS_PV_SIZE=44032
ROOTFS_SIZE=15000
LOG_VOL_SIZE=3000
SCRATCH_VOL_SIZE=2000
PLATFORM_BACKUP_SIZE=1000
fi
ROOTFS_OPTIONS="defaults"
profile_mode=`cat /proc/cmdline |xargs -n1 echo |grep security_profile= | grep extended`
if [ -n "$profile_mode" ]; then
# Enable iversion labelling for rootfs when IMA is enabled
ROOTFS_OPTIONS="${ROOTFS_OPTIONS},iversion"
fi
if [ -d /sys/firmware/efi ] ; then
BACKUP_PART=${ROOTFS_PART_PREFIX}1
BACKUP_PART_NO=1
START_POINT=1
END_POINT=$(($START_POINT + $PLATFORM_BACKUP_SIZE))
BACKUP_END_POINT=$END_POINT
if [ $BACKUP_CREATED -eq 0 ] ; then
wlog "Creating platform backup partition of ${PLATFORM_BACKUP_SIZE}MiB from ${START_POINT}MiB to ${END_POINT}MiB."
exec_retry 5 0.5 "parted -s $rootfs_device mkpart primary ext4 ${START_POINT}MiB ${END_POINT}MiB"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!"
fi
START_POINT=$END_POINT
END_POINT=$(($START_POINT + $EFI_SIZE))
wlog "Creating EFI partition of ${EFI_SIZE}MiB from ${START_POINT}MiB to ${END_POINT}MiB."
exec_retry 5 0.5 "parted -s $rootfs_device mkpart primary fat32 ${START_POINT}MiB ${END_POINT}MiB"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!"
cat<<EOF>>/tmp/part-include
part /boot/efi --fstype=efi --onpart=${ROOTFS_PART_PREFIX}2
EOF
else
BACKUP_PART=${ROOTFS_PART_PREFIX}2
BACKUP_PART_NO=2
wlog "Creating 1MB BIOS GRUB partition from 1MiB to 2MiB."
exec_retry 5 0.5 "parted -s $rootfs_device mkpart primary 1MiB 2MiB"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!"
START_POINT=2
END_POINT=$(($START_POINT + $PLATFORM_BACKUP_SIZE))
BACKUP_END_POINT=$END_POINT
if [ $BACKUP_CREATED -eq 0 ] ; then
wlog "Creating platform backup partition of ${PLATFORM_BACKUP_SIZE}MiB from ${START_POINT}MiB to ${END_POINT}MiB."
exec_retry 5 0.5 "parted -s $rootfs_device mkpart primary ext4 ${START_POINT}MiB ${END_POINT}MiB"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!"
fi
cat<<EOF>>/tmp/part-include
part biosboot --asprimary --fstype=biosboot --onpart=${ROOTFS_PART_PREFIX}1
EOF
fi
START_POINT=$END_POINT
END_POINT=$(($START_POINT + $BOOT_SIZE))
wlog "Creating boot partition of ${BOOT_SIZE}MiB from ${START_POINT}MiB to ${END_POINT}MiB."
exec_retry 5 0.5 "parted -s $rootfs_device mkpart primary ext4 ${START_POINT}MiB ${END_POINT}MiB"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!"
START_POINT=$END_POINT
END_POINT=$(($START_POINT + $ROOTFS_SIZE))
wlog "Creating rootfs partition of ${ROOTFS_SIZE}MiB from ${START_POINT}MiB to ${END_POINT}MiB."
exec_retry 5 0.5 "parted -s $rootfs_device mkpart primary ext4 ${START_POINT}MiB ${END_POINT}MiB"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!"
START_POINT=$END_POINT
END_POINT=$(($START_POINT + $CGCS_PV_SIZE))
wlog "Creating cgcs-vg partition of ${CGCS_PV_SIZE}MiB from ${START_POINT}MiB to ${END_POINT}MiB."
exec_retry 5 0.5 "parted -s $rootfs_device mkpart extended ${START_POINT}MiB ${END_POINT}MiB"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!"
if [ $BACKUP_CREATED -ne 0 ] ; then
BACKUP_CURRENT_SIZE=$(parted -s $BACKUP_PART unit MiB print | grep $BACKUP_PART | awk '{print $3}' | sed 's/[^C0-9]*//g')
if [ $BACKUP_CURRENT_SIZE -lt $PLATFORM_BACKUP_SIZE ] ; then
wlog "Backup partition size is ${BACKUP_CURRENT_SIZE}MiB, resizing to ${PLATFORM_BACKUP_SIZE}MiB."
# parted will throw an error about overlapping with the next partition if we don't do this
BACKUP_END_POINT=$(($BACKUP_END_POINT - 1)).9
exec_retry 5 0.5 "parted -s $rootfs_device resizepart $BACKUP_PART_NO ${BACKUP_END_POINT}MiB"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: resize of platform backup partition failed!"
exec_retry 2 0.1 "e2fsck -p -f $BACKUP_PART"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: e2fsck failed on platform backup partition!"
exec_retry 2 1 "resize2fs $BACKUP_PART"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Filed to resize ext4 fs of platform backup partition!"
elif [ $BACKUP_CURRENT_SIZE -gt $PLATFORM_BACKUP_SIZE ] ; then
report_pre_failure_with_msg "ERROR: Backup partition is ${BACKUP_CURRENT_SIZE}MiB expected size is less or equal to ${PLATFORM_BACKUP_SIZE}MiB."
else
wlog "Backup partition size is correct: ${PLATFORM_BACKUP_SIZE}MiB."
fi
cat<<EOF>>/tmp/part-include
part /opt/platform-backup --fstype=ext4 --asprimary --noformat --onpart=$BACKUP_PART --fsoptions="$ROOTFS_OPTIONS"
EOF
else
cat<<EOF>/tmp/backup-guid-change.sh
echo "\$(date '+%Y-%m-%d %H:%M:%S.%3N') - Updating backup partition GUID."
flock $rootfs_device sgdisk --change-name=${BACKUP_PART_NO}:"${BACKUP_PART_LABEL}" --typecode=${BACKUP_PART_NO}:"${BACKUP_PART_GUID}" $rootfs_device || exit 1
parted -l
EOF
cat<<EOF>>/tmp/part-include
part /opt/platform-backup --fstype=ext4 --asprimary --onpart=$BACKUP_PART --fsoptions="$ROOTFS_OPTIONS"
EOF
fi
cat<<EOF>>/tmp/part-include
part /boot --fstype=ext4 --asprimary --onpart=${ROOTFS_PART_PREFIX}3 --fsoptions="$ROOTFS_OPTIONS"
part pv.253004 --onpart=${ROOTFS_PART_PREFIX}5
volgroup cgts-vg --pesize=32768 pv.253004
logvol /var/log --fstype=ext4 --vgname=cgts-vg --size=$LOG_VOL_SIZE --name=log-lv
logvol /scratch --fstype=ext4 --vgname=cgts-vg --size=$SCRATCH_VOL_SIZE --name=scratch-lv
part / --fstype=ext4 --asprimary --onpart=${ROOTFS_PART_PREFIX}4 --fsoptions="$ROOTFS_OPTIONS"
EOF