Browse Source

Remove InfluxDB

InfluxDB was not fully productized, nor is it used by other end-users.
It should therefore be removed from all deployments to avoid it
consume unnecessary resources (cpu, memory and storage).

Parts of system's dependencies with InfluxDB were remove here.

Story: 2009018
Task: 42761
Depends-On: https://review.opendev.org/799502

Signed-off-by: Fernando Theirs <Fernando.Theirs@windriver.com>
Change-Id: I85acf8a94e54171162b9be6fbf816532cf602831
changes/98/799498/8
Fernando Theirs 3 months ago
parent
commit
27db764e67
  1. 3
      centos_iso_image.inc
  2. 1
      centos_pkg_dirs
  3. 1
      collectd-extensions/centos/collectd-extensions.spec
  4. 95
      collectd-extensions/src/fm_notifier.py
  5. 10
      influxdb-extensions/PKG-INFO
  6. 7
      influxdb-extensions/centos/build_srpm.data
  7. 46
      influxdb-extensions/centos/influxdb-extensions.spec
  8. 202
      influxdb-extensions/src/LICENSE
  9. 322
      influxdb-extensions/src/influxdb.conf
  10. 17
      influxdb-extensions/src/influxdb.conf.pmon
  11. 16
      influxdb-extensions/src/influxdb.logrotate
  12. 28
      influxdb-extensions/src/influxdb.service

3
centos_iso_image.inc

@ -2,9 +2,6 @@
# collectd-extensions
collectd-extensions
# influxdb-extensions
influxdb-extensions
# monitor-tools
monitor-tools

1
centos_pkg_dirs

@ -1,5 +1,4 @@
collectd-extensions
influxdb-extensions
monitor-tools
vm-topology
kube-cpusets

1
collectd-extensions/centos/collectd-extensions.spec

@ -44,7 +44,6 @@ Requires: collectd
Requires: collectd-python
Requires: fm-api
Requires: python-httplib2
Requires: python-influxdb
Requires: python-oslo-concurrency
Requires: tsconfig
Requires: /bin/systemctl

95
collectd-extensions/src/fm_notifier.py

@ -93,10 +93,6 @@ from fm_api import fm_api
import tsconfig.tsconfig as tsc
import plugin_common as pc
# only load influxdb on the controller
if tsc.nodetype == 'controller':
from influxdb import InfluxDBClient
api = fm_api.FaultAPIsV2()
# Debug control
@ -123,9 +119,6 @@ PLUGIN = 'alarm notifier'
# This plugin's degrade function
PLUGIN_DEGRADE = 'degrade notifier'
# the name of the collectd samples database
DATABASE_NAME = 'collectd samples'
READING_TYPE__PERCENT_USAGE = '% usage'
# Default invalid threshold value
@ -547,11 +540,8 @@ mtcDegradeObj = DegradeObject(MTCE_CMD_RX_PORT)
# fmAlarmObject Class
class fmAlarmObject:
dbObj = None # shared database connection obj
host = None # saved hostname
lock = None # global lock for mread_func mutex
database_setup = False # state of database setup
database_setup_in_progress = False # connection mutex
plugin_path = None
fm_connectivity = False
@ -1527,79 +1517,6 @@ def _print_state(obj=None):
(PLUGIN, ex))
def _database_setup(database):
"""Setup the influx database for collectd resource samples"""
collectd.info("%s setting up influxdb:%s database" %
(PLUGIN, database))
error_str = ""
# http://influxdb-python.readthedocs.io/en/latest/examples.html
# http://influxdb-python.readthedocs.io/en/latest/api-documentation.html
fmAlarmObject.dbObj = InfluxDBClient('127.0.0.1', '8086', database)
if fmAlarmObject.dbObj:
try:
fmAlarmObject.dbObj.create_database('collectd')
############################################################
#
# TODO: Read current retention period from service parameter
# Make it a puppet implementation.
#
# Create a '1 week' samples retention policy
# -----------------------------------------
# name = 'collectd samples'
# duration = set retention period in time
# xm - minutes
# xh - hours
# xd - days
# xw - weeks
# xy - years
# database = 'collectd'
# default = True ; make it the default
#
############################################################
fmAlarmObject.dbObj.create_retention_policy(
DATABASE_NAME, '1w', 1, database, True)
except Exception as ex:
if str(ex) == 'database already exists':
try:
collectd.info("%s influxdb:collectd %s" %
(PLUGIN, str(ex)))
fmAlarmObject.dbObj.create_retention_policy(
DATABASE_NAME, '1w', 1, database, True)
except Exception as ex:
if str(ex) == 'retention policy already exists':
collectd.info("%s influxdb:collectd %s" %
(PLUGIN, str(ex)))
else:
error_str = "failure from influxdb ; "
error_str += str(ex)
else:
error_str = "failed to create influxdb:" + database
else:
error_str = "failed to connect to influxdb:" + database
if not error_str:
found = False
retention = \
fmAlarmObject.dbObj.get_list_retention_policies(database)
for r in range(len(retention)):
if retention[r]["name"] == DATABASE_NAME:
collectd.info("%s influxdb:%s samples retention "
"policy: %s" %
(PLUGIN, database, retention[r]))
found = True
if found is True:
collectd.info("%s influxdb:%s is setup" % (PLUGIN, database))
fmAlarmObject.database_setup = True
else:
collectd.error("%s influxdb:%s retention policy NOT setup" %
(PLUGIN, database))
def _clear_alarm_for_missing_filesystems():
"""Clear alarmed file systems that are no longer mounted or present"""
@ -1754,11 +1671,6 @@ def init_func():
# ADD_NEW_PLUGIN: Add new plugin object initialization here ...
# ...
if tsc.nodetype == 'controller':
fmAlarmObject.database_setup_in_progress = True
_database_setup('collectd')
fmAlarmObject.database_setup_in_progress = False
pluginObject.init_completed()
return 0
@ -1906,13 +1818,6 @@ def notifier_func(nObject):
(PLUGIN, nObject.severity))
return 0
if tsc.nodetype == 'controller':
if fmAlarmObject.database_setup is False:
if fmAlarmObject.database_setup_in_progress is False:
fmAlarmObject.database_setup_in_progress = True
_database_setup('collectd')
fmAlarmObject.database_setup_in_progress = False
# get plugin object
if nObject.plugin in PLUGINS:
base_obj = obj = PLUGINS[nObject.plugin]

10
influxdb-extensions/PKG-INFO

@ -1,10 +0,0 @@
Metadata-Version: 1.1
Name: influxdb-extensions
Version: 1.0
Summary: influxdb-extensions
Home-page:
Author: Windriver
Author-email: info@windriver.com
License: ASL 2.0
Description: Titanium Cloud influxdb extensions.
Platform: UNKNOWN

7
influxdb-extensions/centos/build_srpm.data

@ -1,7 +0,0 @@
SRC_DIR="$PKG_BASE"
COPY_LIST="$PKG_BASE/src/LICENSE \
$PKG_BASE/src/influxdb.conf.pmon \
$PKG_BASE/src/influxdb.service"
TIS_PATCH_VER=PKG_GITREVCOUNT

46
influxdb-extensions/centos/influxdb-extensions.spec

@ -1,46 +0,0 @@
Summary: Titanuim Server influxdb Extensions Package
Name: influxdb-extensions
Version: 1.0
Release: 0%{?_tis_dist}.%{tis_patch_ver}
License: ASL 2.0
Group: base
Packager: Wind River <info@windriver.com>
URL: unknown
# create the files tarball
Source0: %{name}-%{version}.tar.gz
source1: influxdb.service
Source2: influxdb.conf.pmon
Requires: systemd
Requires: influxdb
Requires: /bin/systemctl
%description
StarlingX influxdb extensions
%define debug_package %{nil}
%define local_unit_dir %{_sysconfdir}/systemd/system
%prep
%setup
%build
%install
install -m 755 -d %{buildroot}%{_sysconfdir}
install -m 755 -d %{buildroot}%{_sysconfdir}/influxdb
install -m 755 -d %{buildroot}%{local_unit_dir}
install -m 644 %{SOURCE1} %{buildroot}%{local_unit_dir}
install -m 600 %{SOURCE2} %{buildroot}%{_sysconfdir}/influxdb
%clean
rm -rf $RPM_BUILD_ROOT
%files
%defattr(-,root,root,-)
%config(noreplace) %{local_unit_dir}/influxdb.service
%{_sysconfdir}/influxdb/*

202
influxdb-extensions/src/LICENSE

@ -1,202 +0,0 @@
Apache License
Version 2.0, January 2004
http://www.apache.org/licenses/
TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
1. Definitions.
"License" shall mean the terms and conditions for use, reproduction,
and distribution as defined by Sections 1 through 9 of this document.
"Licensor" shall mean the copyright owner or entity authorized by
the copyright owner that is granting the License.
"Legal Entity" shall mean the union of the acting entity and all
other entities that control, are controlled by, or are under common
control with that entity. For the purposes of this definition,
"control" means (i) the power, direct or indirect, to cause the
direction or management of such entity, whether by contract or
otherwise, or (ii) ownership of fifty percent (50%) or more of the
outstanding shares, or (iii) beneficial ownership of such entity.
"You" (or "Your") shall mean an individual or Legal Entity
exercising permissions granted by this License.
"Source" form shall mean the preferred form for making modifications,
including but not limited to software source code, documentation
source, and configuration files.
"Object" form shall mean any form resulting from mechanical
transformation or translation of a Source form, including but
not limited to compiled object code, generated documentation,
and conversions to other media types.
"Work" shall mean the work of authorship, whether in Source or
Object form, made available under the License, as indicated by a
copyright notice that is included in or attached to the work
(an example is provided in the Appendix below).
"Derivative Works" shall mean any work, whether in Source or Object
form, that is based on (or derived from) the Work and for which the
editorial revisions, annotations, elaborations, or other modifications
represent, as a whole, an original work of authorship. For the purposes
of this License, Derivative Works shall not include works that remain
separable from, or merely link (or bind by name) to the interfaces of,
the Work and Derivative Works thereof.
"Contribution" shall mean any work of authorship, including
the original version of the Work and any modifications or additions
to that Work or Derivative Works thereof, that is intentionally
submitted to Licensor for inclusion in the Work by the copyright owner
or by an individual or Legal Entity authorized to submit on behalf of
the copyright owner. For the purposes of this definition, "submitted"
means any form of electronic, verbal, or written communication sent
to the Licensor or its representatives, including but not limited to
communication on electronic mailing lists, source code control systems,
and issue tracking systems that are managed by, or on behalf of, the
Licensor for the purpose of discussing and improving the Work, but
excluding communication that is conspicuously marked or otherwise
designated in writing by the copyright owner as "Not a Contribution."
"Contributor" shall mean Licensor and any individual or Legal Entity
on behalf of whom a Contribution has been received by Licensor and
subsequently incorporated within the Work.
2. Grant of Copyright License. Subject to the terms and conditions of
this License, each Contributor hereby grants to You a perpetual,
worldwide, non-exclusive, no-charge, royalty-free, irrevocable
copyright license to reproduce, prepare Derivative Works of,
publicly display, publicly perform, sublicense, and distribute the
Work and such Derivative Works in Source or Object form.
3. Grant of Patent License. Subject to the terms and conditions of
this License, each Contributor hereby grants to You a perpetual,
worldwide, non-exclusive, no-charge, royalty-free, irrevocable
(except as stated in this section) patent license to make, have made,
use, offer to sell, sell, import, and otherwise transfer the Work,
where such license applies only to those patent claims licensable
by such Contributor that are necessarily infringed by their
Contribution(s) alone or by combination of their Contribution(s)
with the Work to which such Contribution(s) was submitted. If You
institute patent litigation against any entity (including a
cross-claim or counterclaim in a lawsuit) alleging that the Work
or a Contribution incorporated within the Work constitutes direct
or contributory patent infringement, then any patent licenses
granted to You under this License for that Work shall terminate
as of the date such litigation is filed.
4. Redistribution. You may reproduce and distribute copies of the
Work or Derivative Works thereof in any medium, with or without
modifications, and in Source or Object form, provided that You
meet the following conditions:
(a) You must give any other recipients of the Work or
Derivative Works a copy of this License; and
(b) You must cause any modified files to carry prominent notices
stating that You changed the files; and
(c) You must retain, in the Source form of any Derivative Works
that You distribute, all copyright, patent, trademark, and
attribution notices from the Source form of the Work,
excluding those notices that do not pertain to any part of
the Derivative Works; and
(d) If the Work includes a "NOTICE" text file as part of its
distribution, then any Derivative Works that You distribute must
include a readable copy of the attribution notices contained
within such NOTICE file, excluding those notices that do not
pertain to any part of the Derivative Works, in at least one
of the following places: within a NOTICE text file distributed
as part of the Derivative Works; within the Source form or
documentation, if provided along with the Derivative Works; or,
within a display generated by the Derivative Works, if and
wherever such third-party notices normally appear. The contents
of the NOTICE file are for informational purposes only and
do not modify the License. You may add Your own attribution
notices within Derivative Works that You distribute, alongside
or as an addendum to the NOTICE text from the Work, provided
that such additional attribution notices cannot be construed
as modifying the License.
You may add Your own copyright statement to Your modifications and
may provide additional or different license terms and conditions
for use, reproduction, or distribution of Your modifications, or
for any such Derivative Works as a whole, provided Your use,
reproduction, and distribution of the Work otherwise complies with
the conditions stated in this License.
5. Submission of Contributions. Unless You explicitly state otherwise,
any Contribution intentionally submitted for inclusion in the Work
by You to the Licensor shall be under the terms and conditions of
this License, without any additional terms or conditions.
Notwithstanding the above, nothing herein shall supersede or modify
the terms of any separate license agreement you may have executed
with Licensor regarding such Contributions.
6. Trademarks. This License does not grant permission to use the trade
names, trademarks, service marks, or product names of the Licensor,
except as required for reasonable and customary use in describing the
origin of the Work and reproducing the content of the NOTICE file.
7. Disclaimer of Warranty. Unless required by applicable law or
agreed to in writing, Licensor provides the Work (and each
Contributor provides its Contributions) on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
implied, including, without limitation, any warranties or conditions
of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
PARTICULAR PURPOSE. You are solely responsible for determining the
appropriateness of using or redistributing the Work and assume any
risks associated with Your exercise of permissions under this License.
8. Limitation of Liability. In no event and under no legal theory,
whether in tort (including negligence), contract, or otherwise,
unless required by applicable law (such as deliberate and grossly
negligent acts) or agreed to in writing, shall any Contributor be
liable to You for damages, including any direct, indirect, special,
incidental, or consequential damages of any character arising as a
result of this License or out of the use or inability to use the
Work (including but not limited to damages for loss of goodwill,
work stoppage, computer failure or malfunction, or any and all
other commercial damages or losses), even if such Contributor
has been advised of the possibility of such damages.
9. Accepting Warranty or Additional Liability. While redistributing
the Work or Derivative Works thereof, You may choose to offer,
and charge a fee for, acceptance of support, warranty, indemnity,
or other liability obligations and/or rights consistent with this
License. However, in accepting such obligations, You may act only
on Your own behalf and on Your sole responsibility, not on behalf
of any other Contributor, and only if You agree to indemnify,
defend, and hold each Contributor harmless for any liability
incurred by, or claims asserted against, such Contributor by reason
of your accepting any such warranty or additional liability.
END OF TERMS AND CONDITIONS
APPENDIX: How to apply the Apache License to your work.
To apply the Apache License to your work, attach the following
boilerplate notice, with the fields enclosed by brackets "[]"
replaced with your own identifying information. (Don't include
the brackets!) The text should be enclosed in the appropriate
comment syntax for the file format. We also recommend that a
file or class name and description of purpose be included on the
same "printed page" as the copyright notice for easier
identification within third-party archives.
Copyright [yyyy] [name of copyright owner]
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.

322
influxdb-extensions/src/influxdb.conf

@ -1,322 +0,0 @@
### Welcome to the InfluxDB configuration file.
# Once every 24 hours InfluxDB will report anonymous data to m.influxdb.com
# The data includes raft id (random 8 bytes), os, arch, version, and metadata.
# We don't track ip addresses of servers reporting. This is only used
# to track the number of instances running and the versions, which
# is very helpful for us.
# Change this option to true to disable reporting.
reporting-disabled = false
###
### Enterprise registration control
###
[registration]
# enabled = true
# url = "https://enterprise.influxdata.com" # The Enterprise server URL
# token = "" # Registration token for Enterprise server
###
### [meta]
###
### Controls the parameters for the Raft consensus group that stores metadata
### about the InfluxDB cluster.
###
[meta]
dir = "/var/lib/influxdb/meta"
hostname = "localhost"
bind-address = ":8088"
retention-autocreate = true
election-timeout = "1s"
heartbeat-timeout = "1s"
leader-lease-timeout = "500ms"
commit-timeout = "50ms"
cluster-tracing = false
# If enabled, when a Raft cluster loses a peer due to a `DROP SERVER` command,
# the leader will automatically ask a non-raft peer node to promote to a raft
# peer. This only happens if there is a non-raft peer node available to promote.
# This setting only affects the local node, so to ensure if operates correctly, be sure to set
# it in the config of every node.
raft-promotion-enabled = true
###
### [data]
###
### Controls where the actual shard data for InfluxDB lives and how it is
### flushed from the WAL. "dir" may need to be changed to a suitable place
### for your system, but the WAL settings are an advanced configuration. The
### defaults should work for most systems.
###
[data]
dir = "/var/lib/influxdb/data"
# Controls the engine type for new shards. Options are b1, bz1, or tsm1.
# b1 is the 0.9.2 storage engine, bz1 is the 0.9.3 and 0.9.4 engine.
# tsm1 is the 0.9.5 engine and is currenly EXPERIMENTAL. Until 0.9.5 is
# actually released data written into a tsm1 engine may be need to be wiped
# between upgrades.
# engine ="bz1"
# The following WAL settings are for the b1 storage engine used in 0.9.2. They won't
# apply to any new shards created after upgrading to a version > 0.9.3.
max-wal-size = 104857600 # Maximum size the WAL can reach before a flush. Defaults to 100MB.
wal-flush-interval = "10m" # Maximum time data can sit in WAL before a flush.
wal-partition-flush-delay = "2s" # The delay time between each WAL partition being flushed.
# These are the WAL settings for the storage engine >= 0.9.3
wal-dir = "/var/lib/influxdb/wal"
wal-enable-logging = true
# When a series in the WAL in-memory cache reaches this size in bytes it is marked as ready to
# flush to the index
# wal-ready-series-size = 25600
# Flush and compact a partition once this ratio of series are over the ready size
# wal-compaction-threshold = 0.6
# Force a flush and compaction if any series in a partition gets above this size in bytes
# wal-max-series-size = 2097152
# Force a flush of all series and full compaction if there have been no writes in this
# amount of time. This is useful for ensuring that shards that are cold for writes don't
# keep a bunch of data cached in memory and in the WAL.
# wal-flush-cold-interval = "10m"
# Force a partition to flush its largest series if it reaches this approximate size in
# bytes. Remember there are 5 partitions so you'll need at least 5x this amount of memory.
# The more memory you have, the bigger this can be.
# wal-partition-size-threshold = 20971520
# Whether queries should be logged before execution. Very useful for troubleshooting, but will
# log any sensitive data contained within a query.
# query-log-enabled = true
###
### [hinted-handoff]
###
### Controls the hinted handoff feature, which allows nodes to temporarily
### store queued data when one node of a cluster is down for a short period
### of time.
###
[hinted-handoff]
enabled = true
dir = "/var/lib/influxdb/hh"
max-size = 1073741824
max-age = "168h"
retry-rate-limit = 0
# Hinted handoff will start retrying writes to down nodes at a rate of once per second.
# If any error occurs, it will backoff in an exponential manner, until the interval
# reaches retry-max-interval. Once writes to all nodes are successfully completed the
# interval will reset to retry-interval.
retry-interval = "1s"
retry-max-interval = "1m"
# Interval between running checks for data that should be purged. Data is purged from
# hinted-handoff queues for two reasons. 1) The data is older than the max age, or
# 2) the target node has been dropped from the cluster. Data is never dropped until
# it has reached max-age however, for a dropped node or not.
purge-interval = "1h"
###
### [cluster]
###
### Controls non-Raft cluster behavior, which generally includes how data is
### shared across shards.
###
[cluster]
shard-writer-timeout = "10s" # The time within which a shard must respond to write.
write-timeout = "5s" # The time within which a write operation must complete on the cluster.
###
### [retention]
###
### Controls the enforcement of retention policies for evicting old data.
###
[retention]
enabled = true
check-interval = "30m"
###
### [shard-precreation]
###
### Controls the precreation of shards, so they are created before data arrives.
### Only shards that will exist in the future, at time of creation, are precreated.
[shard-precreation]
enabled = true
check-interval = "10m"
advance-period = "30m"
###
### Controls the system self-monitoring, statistics and diagnostics.
###
### The internal database for monitoring data is created automatically if
### if it does not already exist. The target retention within this database
### is called 'monitor' and is also created with a retention period of 7 days
### and a replication factor of 1, if it does not exist. In all cases the
### this retention policy is configured as the default for the database.
[monitor]
store-enabled = true # Whether to record statistics internally.
store-database = "_internal" # The destination database for recorded statistics
store-interval = "10s" # The interval at which to record statistics
###
### [admin]
###
### Controls the availability of the built-in, web-based admin interface. If HTTPS is
### enabled for the admin interface, HTTPS must also be enabled on the [http] service.
###
[admin]
enabled = true
bind-address = ":8083"
https-enabled = false
https-certificate = "/etc/ssl/influxdb.pem"
###
### [http]
###
### Controls how the HTTP endpoints are configured. These are the primary
### mechanism for getting data into and out of InfluxDB.
###
[http]
enabled = true
bind-address = ":8086"
auth-enabled = false
log-enabled = true
write-tracing = false
pprof-enabled = false
https-enabled = false
https-certificate = "/etc/ssl/influxdb.pem"
###
### [[graphite]]
###
### Controls one or many listeners for Graphite data.
###
[[graphite]]
enabled = false
# database = "graphite"
# bind-address = ":2003"
# protocol = "tcp"
# consistency-level = "one"
# name-separator = "."
# These next lines control how batching works. You should have this enabled
# otherwise you could get dropped metrics or poor performance. Batching
# will buffer points in memory if you have many coming in.
# batch-size = 1000 # will flush if this many points get buffered
# batch-pending = 5 # number of batches that may be pending in memory
# batch-timeout = "1s" # will flush at least this often even if we haven't hit buffer limit
# udp-read-buffer = 0 # UDP Read buffer size, 0 means OS default. UDP listener will fail if set above OS max.
## "name-schema" configures tag names for parsing the metric name from graphite protocol;
## separated by `name-separator`.
## The "measurement" tag is special and the corresponding field will become
## the name of the metric.
## e.g. "type.host.measurement.device" will parse "server.localhost.cpu.cpu0" as
## {
## measurement: "cpu",
## tags: {
## "type": "server",
## "host": "localhost,
## "device": "cpu0"
## }
## }
# name-schema = "type.host.measurement.device"
## If set to true, when the input metric name has more fields than `name-schema` specified,
## the extra fields will be ignored.
## Otherwise an error will be logged and the metric rejected.
# ignore-unnamed = true
###
### [collectd]
###
### Controls the listener for collectd data.
###
[collectd]
enabled = true
bind-address = "127.0.0.1:25826"
database = "collectd"
typesdb = "/usr/share/collectd/types.db"
# These next lines control how batching works. You should have this enabled
# otherwise you could get dropped metrics or poor performance. Batching
# will buffer points in memory if you have many coming in.
# batch-size = 1000 # will flush if this many points get buffered
# batch-pending = 5 # number of batches that may be pending in memory
# batch-timeout = "1s" # will flush at least this often even if we haven't hit buffer limit
# read-buffer = 0 # UDP Read buffer size, 0 means OS default. UDP listener will fail if set above OS max.
###
### [opentsdb]
###
### Controls the listener for OpenTSDB data.
###
[opentsdb]
enabled = false
# bind-address = ":4242"
# database = "opentsdb"
# retention-policy = ""
# consistency-level = "one"
# tls-enabled = false
# certificate= ""
# These next lines control how batching works. You should have this enabled
# otherwise you could get dropped metrics or poor performance. Only points
# metrics received over the telnet protocol undergo batching.
# batch-size = 1000 # will flush if this many points get buffered
# batch-pending = 5 # number of batches that may be pending in memory
# batch-timeout = "1s" # will flush at least this often even if we haven't hit buffer limit
###
### [[udp]]
###
### Controls the listeners for InfluxDB line protocol data via UDP.
###
[[udp]]
enabled = false
# bind-address = ""
# database = "udp"
# retention-policy = ""
# These next lines control how batching works. You should have this enabled
# otherwise you could get dropped metrics or poor performance. Batching
# will buffer points in memory if you have many coming in.
# batch-size = 1000 # will flush if this many points get buffered
# batch-pending = 5 # number of batches that may be pending in memory
# batch-timeout = "1s" # will flush at least this often even if we haven't hit buffer limit
# read-buffer = 0 # UDP Read buffer size, 0 means OS default. UDP listener will fail if set above OS max.
###
### [continuous_queries]
###
### Controls how continuous queries are run within InfluxDB.
###
[continuous_queries]
log-enabled = true
enabled = true
recompute-previous-n = 2
recompute-no-older-than = "10m"
compute-runs-per-interval = 10
compute-no-more-than = "2m"

17
influxdb-extensions/src/influxdb.conf.pmon

@ -1,17 +0,0 @@
[process]
process = influxdb
service = influxdb
style = lsb
pidfile = /var/run/influxdb/influxdb.pid
severity = major ; minor, major, critical
restarts = 3 ; restart retries before error assertion
interval = 5 ; number of seconds to wait between restarts
debounce = 10 ; number of seconds that a process needs to remain
; running before degrade is removed and retry count
; is cleared.
startuptime = 3 ; Seconds to wait after process start before starting the debounce monitor
mode = passive ; Monitoring mode: passive (default) or active
; passive: process death monitoring (default: always)
; active : heartbeat monitoring, i.e. request / response messaging
; ignore : do not monitor or stop monitoring
quorum = 0 ; process is in the host watchdog quorum

16
influxdb-extensions/src/influxdb.logrotate

@ -1,16 +0,0 @@
#daily
nodateext
/var/log/influxdb/influxdb.log
{
size 20M
start 1
missingok
rotate 20
compress
sharedscripts
postrotate
systemctl reload syslog-ng > /dev/null 2>&1 || true
endscript
}

28
influxdb-extensions/src/influxdb.service

@ -1,28 +0,0 @@
[Unit]
Description=InfluxDB open-source, distributed, time series database
Documentation=https://influxdb.com/docs/
Before=collectd.service
Before=pmon.service
After=local-fs.target network-online.target
Requires=local-fs.target network-online.target
[Service]
User=influxdb
Group=influxdb
LimitNOFILE=65536
Environment='STDOUT=/dev/null'
Environment='STDERR=/var/log/influxdb/influxd.log'
EnvironmentFile=-/etc/default/influxdb
PermissionsStartOnly=true
ExecStartPre=-/usr/bin/mkdir -p /var/run/influxdb
ExecStartPre=-/usr/bin/chown influxdb:influxdb /var/run/influxdb
ExecStartPre=-/usr/bin/touch /var/log/influxdb/influxd.log
ExecStartPre=-/usr/bin/chown influxdb:influxdb /var/log/influxdb/influxd.log
ExecStartPre=-/usr/bin/chmod 640 /var/log/influxdb/influxd.log
ExecStart=/bin/sh -c "/usr/bin/influxd -config /etc/influxdb/influxdb.conf -pidfile /var/run/influxdb/influxdb.pid ${INFLUXD_OPTS} >> ${STDOUT} 2>> ${STDERR}"
ExecStopPost=/bin/bash -c 'rm /var/run/influxdb/influxdb.pid'
KillMode=control-group
[Install]
WantedBy=multi-user.target
Alias=influxd.service
Loading…
Cancel
Save