stx tool: control: Add the support of control module

Implement the stx control module so that the developer could
manage the four containers with the 'stx control xxx' command.
Containers: (stx-builder|stx-pkgbuilder|stx-lat-tool|stx-repomgr)

Now we assume that we have a minikube env to be ready for this
module, we can use it directly. For the minikube env installation
we can build it with the stx-init-env script later.

Now support the action: [status|start|stop|enter|upgrade]

stx control status:  Check status of the containers
stx control start:   Boot the containers up
stx control stop:    Shutdown the containers
stx control enter:   Login the container(default builder)
stx control upgrade: Upgrade the containers

This module will be used after the developer have a minikube env,

Please refer to the more help information with the command
'stx control --help'

Story: 2008862
Task: 42514

Signed-off-by: Zhixiong Chi <zhixiong.chi@windriver.com>
Change-Id: I0c25e0f784671e90c56d5d367b12a27c3f3fa7cf

.yamllint

@@ -0,0 +1,15 @@
+---
+extends: default
+
+rules:
+  # 80 chars should be enough, but don't fail if a line is longer
+  line-length:
+    max: 200
+    level: warning
+  braces:
+    min-spaces-inside: 0
+    max-spaces-inside: 2
+  indentation:
+    spaces: consistent
+    indent-sequences: whatever
+    check-multi-line-strings: false

stx-init-env

@@ -1,2 +1,25 @@
+#!/bin/bash
+
+if [ -z "$MINIKUBE_HOME" ];then
+    MINIKUBE_HOME=$HOME
+else
+    if [ ! -d "$MINIKUBE_HOME" ]; then
+        echo "The directory defined by \$MINIKUBE_HOME doesn't exist"
+        return 1
+    fi
+fi
+
+FSTYPE=$(stat -f -L -c %T $MINIKUBE_HOME)
+if [ x"$FSTYPE" == x"nfs" ]; then
+    echo ""
+    echo "Warning: stx minikube doesn't allow \$MINIKUBE_HOME or \$HOME directory as nfs mount point!!!"
+    echo "         Please set non-nfs MINIKUBE_HOME with the command 'export MINIKUBE_HOME=XXX/YYY'"
+    echo ""
+    unset MINIKUBE_HOME
+    return 1
+fi
+
 export PRJDIR=$(pwd)
 export PATH=$PRJDIR/stx/bin:$PATH
+export MINIKUBENAME=minikube-$USER-upstream
+export KUBECONFIG=$MINIKUBE_HOME/.kube/config

stx.conf

@@ -1,14 +1,36 @@
-[user]
-name =
-project =
+[project]
+name = stx
+gituser = STX Builder
+gitemail = stx.builder@opendev.org
+proxy = false
+proxyserver = opendev.org
+proxyport = 8080
 
 [builder]
+uid = 1000
+myuname = builder
+release = 6.0
+dist = bullseye
+stx_dist = .stx
+debfullname = STX Builder
+debemail = stx.builder@opendev.org
+
+[pkgbuilder]
 mode = local
 
 [repomgr]
-name = aptly
+type = aptly
+cengnurl =
+sourceslist =
+deblist =
+dsclist =
+
+[aptly]
+mode = local
+
+[pulp]
 mode = local
 
 [default]
-project = stx-build
+name = stx
 

stx/lib/stx/command.py

@@ -0,0 +1,98 @@
+# Copyright (c) 2021 Wind River Systems, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import logging
+import os
+from stx import utils  # pylint: disable=E0611
+import subprocess
+import sys
+
+logger = logging.getLogger('STX-Command')
+utils.set_logger(logger)
+
+
+def check_prjdir_env():
+    prjdir_value = os.getenv('PRJDIR', '')
+    if not prjdir_value:
+        logger.warning('Please source the file stx-init-env to export the \
+PRJDIR variable.')
+        logger.warning('If the minikube had already started, please source \
+the file import-stx instead.')
+        sys.exit(0)
+
+
+def get_pods_info():
+    '''Get all pods information of the stx building tools.'''
+
+    cmd = 'minikube -p $MINIKUBENAME kubectl -- get pods '
+    logger.info('stx-tools pods list:')
+    subprocess.check_call(cmd, shell=True)
+
+
+def get_deployment_info():
+    '''Get all deployment information of the stx building tools.'''
+
+    cmd = 'minikube -p $MINIKUBENAME kubectl -- get deployment'
+    logger.info('stx-tools deployments list:')
+    subprocess.check_call(cmd, shell=True)
+
+
+def get_helm_info():
+    '''Get the helm list information of the stx building tools.'''
+
+    cmd = 'helm ls'
+    logger.info('helm list:\n')
+    subprocess.check_call(cmd, shell=True)
+
+
+def get_pod_name(dockername):
+    '''get the detailed pod name from the four pods.'''
+
+    cmd = 'minikube -p $MINIKUBENAME kubectl -- get pods | grep Running| \
+grep stx-' + dockername + ' | awk \'{print $1}\' '
+    output = subprocess.check_output(cmd, shell=True)
+    podname = str(output.decode('utf8').strip())
+
+    return podname
+
+
+def helm_release_exists(projectname):
+    '''Check if the helm release exists'''
+
+    cmd = 'helm ls | grep ' + projectname
+    ret = subprocess.getoutput(cmd)
+    if ret:
+        return True
+    else:
+        return False
+
+
+def generatePrefixCommand(podname, command, enableuser):
+    '''Generate the command executed in the host'''
+
+    prefix_exec_cmd = 'minikube -p $MINIKUBENAME kubectl -- exec -ti '
+    builder_exec_cmd = prefix_exec_cmd + podname
+    prefix_bash_cmd = ' -- bash -l -c '
+    prefix_bash_with_user_cmd = ' -- bash -l -c \'sudo -u ${MYUNAME} bash \
+--rcfile /home/$MYUNAME/userenv -i -c '
+    builder_exec_bash_cmd = builder_exec_cmd + prefix_bash_cmd
+    builder_exec_bash_with_user_cmd = builder_exec_cmd + \
+        prefix_bash_with_user_cmd
+
+    if enableuser:
+        cmd = builder_exec_bash_with_user_cmd + command
+    else:
+        cmd = builder_exec_bash_cmd + command
+
+    return cmd

stx/lib/stx/stx_control.py

@@ -0,0 +1,264 @@
+#!/usr/bin/env python3
+#
+# Copyright (c) 2021 Wind River Systems, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import getpass
+import logging
+import os
+import subprocess
+import sys
+import time
+
+from stx import command  # pylint: disable=E0611
+from stx import helper  # pylint: disable=E0611
+from stx import stx_configparser  # pylint: disable=E0611
+from stx import utils  # pylint: disable=E0611
+
+helmchartdir = 'stx/stx-build-tools-chart/stx-builder'
+
+
+class HandleControlTask:
+    '''Handle the task for the control sub-command'''
+
+    def __init__(self):
+        self.stxconfig = stx_configparser.STXConfigParser()
+        self.projectname = self.stxconfig.getConfig('project', 'name')
+        self.helm_status = command.helm_release_exists(self.projectname)
+        self.logger = logging.getLogger('STX-Control')
+        utils.set_logger(self.logger)
+
+    def configurePulp(self):
+        '''Initial the password of the pulp service.'''
+
+        # wait three times when the pulp service is not initialized yet.
+        count = 3
+        remote_cmd = ' -- bash /etc/pulp/changepasswd'
+        pulpname = ' stx-pulp'
+        while count:
+            podname = command.get_pod_name(pulpname)
+            if podname:
+                cmd = 'minikube -p $MINIKUBENAME kubectl -- exec -ti '
+                cmd = cmd + podname + remote_cmd
+                subprocess.call(cmd, shell=True)
+                count = 0
+            else:
+                self.logger.info('Waiting for pulp to finish the setup...')
+                time.sleep(60)
+                count = count - 1
+                if count == 0:
+                    self.logger.error('Pulp service initialization failed.\n')
+                    sys.exit(1)
+
+    def finish_configure(self):
+        '''Before starting, we need to finish the setup'''
+
+        projectname = self.stxconfig.getConfig('project', 'name')
+        builder_uid = self.stxconfig.getConfig('builder', 'uid')
+        builder_myuname = self.stxconfig.getConfig('builder', 'myuname')
+        builder_release = self.stxconfig.getConfig('builder', 'release')
+        builder_dist = self.stxconfig.getConfig('builder', 'dist')
+        builder_stx_dist = self.stxconfig.getConfig('builder', 'stx_dist')
+        builder_debfullname = self.stxconfig.getConfig('builder',
+                                                       'debfullname')
+        builder_debemail = self.stxconfig.getConfig('builder', 'debemail')
+        repomgr_type = self.stxconfig.getConfig('repomgr', 'type')
+        gituser = self.stxconfig.getConfig('project', 'gituser')
+        gitemail = self.stxconfig.getConfig('project', 'gitemail')
+        proxy = self.stxconfig.getConfig('project', 'proxy')
+        proxyserver = self.stxconfig.getConfig('project', 'proxyserver')
+        proxyport = self.stxconfig.getConfig('project', 'proxyport')
+        cengnurl = self.stxconfig.getConfig('repomgr', 'cengnurl')
+        sourceslist = self.stxconfig.getConfig('repomgr', 'sourceslist')
+        deblist = self.stxconfig.getConfig('repomgr', 'deblist')
+        dsclist = self.stxconfig.getConfig('repomgr', 'dsclist')
+        if sourceslist:
+            if not (deblist or dsclist):
+                self.logger.warning('*************************************\
+*********************************')
+                self.logger.warning('Either Deblist or Dsclist must exist \
+when sourceslist is enabled!!!')
+                self.logger.warning('*************************************\
+*********************************')
+                sys.exit(1)
+
+        repomgr_type = self.stxconfig.getConfig('repomgr', 'type')
+        if repomgr_type not in ('aptly', 'pulp'):
+            self.logger.warning('Repomgr type only supports [aptly] or [pulp],\
+ please modify the value with config command!!!')
+            sys.exit(1)
+
+        builder_chartfile = os.path.join(os.environ['PRJDIR'],
+                                         helmchartdir, 'Chart.yaml')
+        cmd = 'sed -i -e "s:aptly:%s:g" %s' % (repomgr_type, builder_chartfile)
+        self.logger.debug('Write the repomgr type [%s] to the chart file \
+with the command [%s]', repomgr_type, cmd)
+
+        # Fix Me:
+        # Now we always use aptly as the repomgr.
+        # Don't switch to pulp, since it will trigger the sshd block issue.
+        # Later if we find the root cause and fix it, we will enable the
+        # following function.
+
+        # os.system(cmd)
+
+        builderhelmchartdir = os.path.join(os.environ['PRJDIR'], helmchartdir)
+        configmap_dir = os.path.join(builderhelmchartdir, 'configmap/')
+        self.logger.debug('builder localrc file is located at %s',
+                          configmap_dir)
+        pkgbuilder_configmap_dir = os.path.join(builderhelmchartdir,
+                                                'dependency_chart/\
+stx-pkgbuilder/configmap/')
+        self.logger.debug('pkgbuilder localrc file is located at %s',
+                          pkgbuilder_configmap_dir)
+        if not os.path.exists(pkgbuilder_configmap_dir):
+            os.mkdir(pkgbuilder_configmap_dir)
+
+        localrcsample = os.path.join(configmap_dir, 'localrc.sample')
+        localrc = os.path.join(configmap_dir, 'stx-localrc')
+        if os.path.exists(localrc):
+            os.remove(localrc)
+
+        hostusername = getpass.getuser()
+
+        with open(localrcsample, "r") as rf:
+            message = ''
+            for line in rf:
+                line = line.replace("@PROJECT@", projectname)
+                line = line.replace("@MYUID@", builder_uid)
+                line = line.replace("@MYUNAME@", builder_myuname)
+                line = line.replace("@MY_RELEASE@", builder_release)
+                line = line.replace("@DIST@", builder_dist)
+                line = line.replace("@STX_DIST@", builder_stx_dist)
+                line = line.replace("@DEBFULLNAME@", builder_debfullname)
+                line = line.replace("@DEBEMAIL@", builder_debemail)
+                line = line.replace("@REPOMGR_TYPE@", repomgr_type)
+                line = line.replace("@GITUSER@", gituser)
+                line = line.replace("@GITEMAIL@", gitemail)
+                line = line.replace("@PROXY@", proxy)
+                line = line.replace("@PROXYSERVER@", proxyserver)
+                line = line.replace("@PROXYPORT@", proxyport)
+                line = line.replace("@HOSTUSERNAME@", hostusername)
+                line = line.replace("@CENGNURL@", cengnurl)
+                if sourceslist:
+                    line = line.replace("@fetch@", "true")
+                    line = line.replace("@SOURCESLIST@", sourceslist)
+                    line = line.replace("@DEBLIST@", deblist)
+                    line = line.replace("@DSCLIST@", dsclist)
+                message += line
+
+        with open(localrc, "w") as wf:
+            wf.write(message)
+
+        # Copy stx-localrc file of builder container to pkgbuilder
+        cmd = 'cp -f %s %s' % (localrc, pkgbuilder_configmap_dir)
+        os.system(cmd)
+
+        # Update the dependency charts
+        cmd = 'helm dependency update ' + helmchartdir
+        self.logger.debug('Dependency build command: %s', cmd)
+        subprocess.call(cmd, shell=True)
+
+        return repomgr_type
+
+    def handleStartTask(self, helmstatus, projectname):
+        cmd = 'helm install ' + projectname + ' ' + helmchartdir
+        self.logger.debug('Execute the helm start command: %s', cmd)
+        if helmstatus:
+            self.logger.error('The helm release %s already exists.',
+                              projectname)
+            sys.exit(1)
+        else:
+            repomgr_type = self.finish_configure()
+            subprocess.check_call(cmd, shell=True, cwd=os.environ['PRJDIR'])
+            if repomgr_type == 'pulp':
+                self.configurePulp()
+
+    def handleStopTask(self, helmstatus, projectname):
+        if helmstatus:
+            cmd = 'helm uninstall ' + projectname
+            self.logger.debug('Execute the helm stop command: %s', cmd)
+            subprocess.check_call(cmd, shell=True)
+        else:
+            self.logger.error('The helm release %s does not exist.',
+                              projectname)
+            sys.exit(1)
+
+    def handleUpgradeTask(self, helmstatus, projectname):
+        command.check_prjdir_env()
+        self.finish_configure()
+        if helmstatus:
+            cmd = 'helm upgrade ' + projectname + ' ' + helmchartdir
+            self.logger.debug('Execute the upgrade command: %s', cmd)
+            subprocess.call(cmd, shell=True, cwd=os.environ['PRJDIR'])
+        else:
+            self.logger.error('The helm release %s does not exist.',
+                              projectname)
+            sys.exit(1)
+
+    def handleEnterTask(self, args):
+        default_docker = 'builder'
+        container_list = ['builder', 'pkgbuilder', 'repomgr', 'lat']
+        prefix_exec_cmd = 'minikube -p $MINIKUBENAME kubectl -- exec -ti '
+
+        if args.dockername:
+            if args.dockername not in container_list:
+                self.logger.error('Please input the correct docker name \
+argument. eg: %s \n', container_list)
+                sys.exit(1)
+            default_docker = args.dockername
+
+        podname = command.get_pod_name(default_docker)
+        if podname:
+            if default_docker == 'builder':
+                cmd = prefix_exec_cmd + podname
+                cmd = cmd + ' -- bash -l -c \'sudo -u ${MYUNAME} bash \
+--rcfile /home/$MYUNAME/userenv\''
+            else:
+                cmd = prefix_exec_cmd + podname + ' -- bash'
+            self.logger.debug('Execute the enter command: %s', cmd)
+            subprocess.call(cmd, shell=True)
+        else:
+            self.logger.error('Please ensure the docker container you want to \
+enter has been started!!!\n')
+            sys.exit(1)
+
+    def handleControl(self, args):
+
+        self.logger.setLevel(args.loglevel)
+        projectname = self.stxconfig.getConfig('project', 'name')
+        if not projectname:
+            projectname = 'stx'
+
+        if args.ctl_task == 'start':
+            self.handleStartTask(self.helm_status, projectname)
+
+        elif args.ctl_task == 'stop':
+            self.handleStopTask(self.helm_status, projectname)
+
+        elif args.ctl_task == 'upgrade':
+            self.handleUpgradeTask(self.helm_status, projectname)
+
+        elif args.ctl_task == 'enter':
+            self.handleEnterTask(args)
+
+        elif args.ctl_task == 'status':
+            command.get_helm_info()
+            command.get_deployment_info()
+            command.get_pods_info()
+
+        else:
+            self.logger.error('Control module doesn\'t support your \
+subcommand: [%s].\n', args.ctl_task)
+            print(helper.help_control())

stx/lib/stx/stx_main.py

@@ -1,4 +1,3 @@
-#
 # Copyright (c) 2021 Wind River Systems, Inc.
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
@@ -16,10 +15,11 @@
 import argparse
 import logging
 
+from stx import command  # pylint: disable=E0611
 from stx import stx_configparser  # pylint: disable=E0611
+from stx import stx_control  # pylint: disable=E0611
 from stx import utils  # pylint: disable=E0611
 
-
 logger = logging.getLogger('STX')
 utils.set_logger(logger)
 
@@ -32,7 +32,9 @@ class CommandLine:
     '''Handles parsing the commandline parameters for stx tool'''
 
     def __init__(self):
+        command.check_prjdir_env()
         self.handleconfig = stx_configparser.HandleConfigTask()
+        self.handlecontrol = stx_control.HandleControlTask()
         self.parser = self.parseCommandLine()
 
     def parseCommandLine(self):
@@ -43,25 +45,65 @@ class CommandLine:
             epilog='''Tips:
 Use %(prog)s --help to get help for all of parameters\n\n''')
 
-        subparsers = parser.add_subparsers(title='Builtin Commands:', help='sub-command for stx\n\n')
+        subparsers = parser.add_subparsers(title='Builtin Commands:',
+                                           help='sub-command for stx\n\n')
 
-        config_subparser = subparsers.add_parser('config', help='Change stx configuration settings. eg: [--show|--get|--add|--unset|--remove-section]')
-        config_subparser.add_argument('--show', help='Show all the content of the config file\n\n', action='store_true')
-        config_subparser.add_argument('--add', help='Add the setting section.key and the value into the config file.\n\n', nargs=2, required=False)
-        config_subparser.add_argument('--get', help='Get the value of the section.key from the config file.\n\n', nargs=1, required=False)
-        config_subparser.add_argument('--unset', help='Remove value of the section.key from the config file.\n\n', nargs=1, required=False)
-        config_subparser.add_argument('--removesection', help='Remove the section from the config file.\n\n', nargs=1, required=False)
+        control_subparser = subparsers.add_parser('control',
+                                                  help='Execute the control \
+task.\t\teg: [start|enter|stop|status|upgrade]')
+        control_subparser.add_argument('ctl_task',
+                                       help='[ start|stop|enter|status|upgrade\
+                                       ]: Create or Stop or Enter or List or \
+                                       Upgrade the stx-builder/obs/lat/pulp \
+                                       containers.\n\n')
+        control_subparser.add_argument('--dockername',
+                                       help='[ builder|pkgbuilder|repomgr|lat \
+                                       ], the four dockers you can enter, if \
+                                       there is no this argument for enter \
+                                       task, default enter the stx-builder \
+                                       container\n\n', required=False)
+        control_subparser.set_defaults(handle=self.handlecontrol.handleControl)
+
+        config_subparser = subparsers.add_parser('config',
+                                                 help='Change stx config \
+settings.\t\teg: [ --show|--get|--add|--unset|--remove-section ]')
+        config_subparser.add_argument('--show',
+                                      help='Show all the content of the config\
+                                      file\n\n', action='store_true')
+        config_subparser.add_argument('--add',
+                                      help='Add the setting section.key and \
+                                      value into the config file.\n\n',
+                                      nargs=2, required=False)
+        config_subparser.add_argument('--get',
+                                      help='Get the value of the section.key \
+                                      from the config file.\n\n', nargs=1,
+                                      required=False)
+        config_subparser.add_argument('--unset',
+                                      help='Remove value of the section.key \
+                                      from the config file.\n\n', nargs=1,
+                                      required=False)
+        config_subparser.add_argument('--removesection',
+                                      help='Remove the section from the \
+                                      config file.\n\n', nargs=1,
+                                      required=False)
         config_subparser.set_defaults(handle=self.handleconfig.handleConfig)
 
-        parser.add_argument('-d', '--debug', help='Enable debug output\n\n',
-                            action='store_const', const=logging.DEBUG, dest='loglevel', default=logging.INFO)
+        parser.add_argument('-d', '--debug',
+                            help='Enable debug output\n\n',
+                            action='store_const', const=logging.DEBUG,
+                            dest='loglevel', default=logging.INFO)
 
-        parser.add_argument('-h', '--help', help='Show this help message and exit\n\n', action='help')
+        parser.add_argument('-h', '--help',
+                            help='Show this help message and exit\n\n',
+                            action='help')
 
-        parser.add_argument('-q', '--quiet', help='Hide all output except error messages\n\n',
-                            action='store_const', const=logging.ERROR, dest='loglevel')
+        parser.add_argument('-q', '--quiet',
+                            help='Hide all output except error messages\n\n',
+                            action='store_const', const=logging.ERROR,
+                            dest='loglevel')
 
-        parser.add_argument('-v', '--version', help='Stx build tools version\n\n',
+        parser.add_argument('-v', '--version',
+                            help='Stx build tools version\n\n',
                             action='version', version='%(prog)s 1.0.0')
         return parser
 
@@ -72,7 +114,6 @@ Use %(prog)s --help to get help for all of parameters\n\n''')
 
 
 def stx_main():
-
     command_line = CommandLine()
     args = command_line.parseArgs()
 

stx/stx-build-tools-chart/stx-builder/.helmignore

@@ -0,0 +1,23 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*.orig
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
+.vscode/

stx/stx-build-tools-chart/stx-builder/Chart.yaml

@@ -0,0 +1,35 @@
+---
+apiVersion: v2
+name: stx-builder
+description: A Helm chart for Starlingx Building Kubernetes
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+# Versions are expected to follow Semantic Versioning (https://semver.org/)
+version: 0.1.0
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application. Versions are not expected to
+# follow Semantic Versioning. They should reflect the version the application is using.
+appVersion: 1.16.0
+
+dependencies:
+  - name: stx-pkgbuilder
+    version: "0.1.0"
+    repository: "file://dependency_chart/stx-pkgbuilder"
+  - name: stx-lat-tool
+    version: "0.1.0"
+    repository: "file://dependency_chart/stx-lat-tool"
+  - name: stx-repomgr
+    version: "0.1.0"
+    repository: "file://dependency_chart/stx-aptly/stx-repomgr"

stx/stx-build-tools-chart/stx-builder/configmap/localrc.sample

@@ -0,0 +1,47 @@
+# Release Variable
+export MY_RELEASE=@MY_RELEASE@
+
+# avoid calling your project 'build' it will break some SDEBs
+export PROJECT=@PROJECT@
+
+# uid
+export MYUID=@MYUID@
+
+# These are used in the Dockerfile, not sure where else
+export MYUNAME=@MYUNAME@
+
+export DIST=@DIST@
+
+export STX_DIST=@STX_DIST@
+
+export REPOMGR_TYPE=@REPOMGR_TYPE@
+
+export GITUSER="@GITUSER@"
+
+export GITEMAIL=@GITEMAIL@
+
+export DEBFULLNAME="@DEBFULLNAME@"
+
+export DEBEMAIL=@DEBEMAIL@
+
+export PROXY=@PROXY@
+
+export PROXYSERVER=@PROXYSERVER@
+
+export PROXYPORT=@PROXYPORT@
+
+export HOSTUSERNAME=@HOSTUSERNAME@
+
+export CENGNURL=@CENGNURL@
+
+if [[ x"@fetch@" == x"true" ]];then
+    export SOURCESLIST=/usr/local/bin/stx/@SOURCESLIST@
+    export DEBLIST=/usr/local/bin/stx/@DEBLIST@
+    export DSCLIST=/usr/local/bin/stx/@DSCLIST@
+fi
+
+export REPOMGR_URL=http://@PROJECT@-stx-repomgr:8080
+
+export REPOMGR_DEPLOY_URL=http://@PROJECT@-stx-repomgr:80/
+
+export BUILDER_URL=http://@PROJECT@-stx-pkgbuilder:8080/pkgbuilder/

stx/stx-build-tools-chart/stx-builder/configmap/stx-cleanup

@@ -0,0 +1,14 @@
+#!/bin/bash
+
+if [ -f "$MY_REPO_ROOT_DIR/cgcs-root/build-tools/stx/repo_manage.py" ]; then
+    repo_manage.py clean
+fi
+
+rm -rf $MY_REPO_ROOT_DIR/stx-tools
+rm -rf $MY_REPO_ROOT_DIR/cgcs-root
+rm -rf $MY_REPO_ROOT_DIR/.repo
+rm -f /home/$MYUNAME/prepare-build.done
+
+echo "**************************************************************************"
+echo "Cleanup Finished!"
+echo "**************************************************************************"

stx/stx-build-tools-chart/stx-builder/configmap/stx-deb.list

@@ -0,0 +1,32 @@
+zomg 0.8.1-2
+#zonemaster-cli 1.0.5-1.1
+zoneminder 1.34.23-1
+#zoneminder-doc #1.34.23-1
+zookeeper 3.4.13-6
+#zookeeper-bin 3.4.13-6
+zookeeperd 3.4.13-6
+#zoom-player 1.1.5~dfsg-6
+zopfli# 1.0.3-1
+#zoph 0.9.16-1
+wpasupplicant 2:2.9.0-21
+#wpd2epub 0.9.6-2
+wpd2odt #0.9.6-2
+wpewebkit-driver# 2.32.1-1
+wpg2odg 0.9.6-2
+wpolish #20210105-1
+tryton-modules-all 47
+#tryton-modules-analytic-account 5.0.3-1
+tryton-modules-analytic-invoice# 1:5.0.3-1
+#tryton-modules-analytic-purchase 5.0.2-1
+tryton-modules-analytic-sale 5.0.2-1
+#science-physics 1.14.1
+science-physics-dev# 1.14.1
+#science-presentation 1.14.1
+science-psychophysics# 1.14.1
+#science-robotics 1.14.1
+science-robotics-dev# 1.14.1
+#science-simulations 1.14.1
+science-statistics# 1.14.1
+#science-tasks 1.14.1
+science-typesetting# 1.14.1
+libdns-export1110

stx/stx-build-tools-chart/stx-builder/configmap/stx-dsc.list

@@ -0,0 +1,21 @@
+yorick 2.2.04+dfsg1-12
+yorick-full #2.2.04+dfsg1+full
+xzgv 0.9.2-2
+xzip# 1:1.8.2-4
+#xvkbd #4.1-1
+#xwallpaper 0.6.5-1
+#ipolish #20210105-1
+#ispell.pt 20210112-1
+#tesseract-lang 1:4.00~git30-7274cfa-1.1
+#swish-e #2.4.7-6
+#swisswatch 0.6-18
+#switchconf 0.0.17-1
+#ruby-mechanize 2.7.7-1
+#ruby-memoist 0.16.2-2
+#zookeeper 3.4.13-6
+#zookeeper 3.4.13-2
+#0ad 0.0.23.1-2
+#2vcard 0.6-1
+#3270font #2.0.0-1
+#389-ds-base 1.4.0.21-1
+#openssl

stx/stx-build-tools-chart/stx-builder/configmap/stx-prepare-build

@@ -0,0 +1,54 @@
+#!/bin/bash
+
+git config --global user.name "$GITUSER"
+git config --global user.email "$GITEMAIL"
+git config --global color.ui false
+
+cd $MY_REPO_ROOT_DIR
+if [[ x"$PROXY" == x"true" ]]; then
+    ps aux|grep ssh|grep qTfnN 2>&1>/dev/null
+    ret=$?
+    if [[ x"$ret" != x"0" ]];then
+        echo "*************************************************************************************"
+        echo "Note: Next we will create the proxy and connect the proxyserver $PROXYSERVER!!!"
+        echo ""
+        echo ""
+        echo "*************************************************************************************"
+        ssh -D 8080 -qTfnN $HOSTUSERNAME@$PROXYSERVER
+    fi
+
+    proxychains repo init -u git://lxgit.wrs.com/stx-debian/manifest.git
+    proxychains repo sync
+else
+    repo init -u git://lxgit.wrs.com/stx-debian/manifest.git
+    repo sync
+fi
+
+sudo apt-get update
+
+if [[ x"$CENGNURL" != x"" ]]; then
+    repo_manage.py mirror --url $CENGNURL
+fi
+
+if [[ x"$SOURCESLIST" != x"" ]]; then
+    if [[ x"$DEBLIST" == x"" ]]; then
+	if [[ x"$DSCLIST" == x"" ]]; then
+            echo "Either deblist or dsclist must not NULL!!!!"
+	    return 1
+	else
+            repo_manage.py download --sources_list=$SOURCESLIST  --dsc_list=$DSCLIST
+	fi
+    else
+	if [[ x"$DSCLIST" == x"" ]]; then
+	    repo_manage.py download --sources_list=$SOURCESLIST --deb_list=$DEBLIST
+	else
+            repo_manage.py download --sources_list=$SOURCESLIST --deb_list=$DEBLIST --dsc_list=$DSCLIST
+	fi
+    fi
+fi
+
+touch /home/$MYUNAME/prepare-build.done
+
+echo "************************************************************************************************"
+echo "Prepare Done!"
+echo "************************************************************************************************"

stx/stx-build-tools-chart/stx-builder/configmap/stx-sources.list

@@ -0,0 +1,4 @@
+deb [trusted=yes] http://mirror.starlingx.cengn.ca/mirror/debian/debian/ftp.ca.debian.org/debian/ bullseye main
+deb-src [trusted=yes] http://mirror.starlingx.cengn.ca/mirror/debian/debian/ftp.ca.debian.org/debian/ bullseye main
+deb [trusted=yes] http://mirror.starlingx.cengn.ca/mirror/debian/debian/ftp.ca.debian.org/debian/ buster main
+deb-src [trusted=yes] http://mirror.starlingx.cengn.ca/mirror/debian/debian/ftp.ca.debian.org/debian/ buster main

stx/stx-build-tools-chart/stx-builder/dependency_chart/stx-aptly/stx-repomgr/Chart.yaml

@@ -0,0 +1,25 @@
+---
+apiVersion: v2
+name: stx-repomgr
+description: A Helm chart for Kubernetes
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+# Versions are expected to follow Semantic Versioning (https://semver.org/)
+version: 0.1.0
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application. Versions are not expected to
+# follow Semantic Versioning. They should reflect the version the application is using.
+# It is recommended to use it with quotes.
+appVersion: "1.16.0"

stx/stx-build-tools-chart/stx-builder/dependency_chart/stx-aptly/stx-repomgr/templates/_helpers.tpl

@@ -0,0 +1,62 @@
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "stx-repomgr.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" }}
+{{- end }}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "stx-repomgr.fullname" -}}
+{{- if .Values.fullnameOverride }}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" }}
+{{- else }}
+{{- $name := default .Chart.Name .Values.nameOverride }}
+{{- if contains $name .Release.Name }}
+{{- .Release.Name | trunc 63 | trimSuffix "-" }}
+{{- else }}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" }}
+{{- end }}
+{{- end }}
+{{- end }}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "stx-repomgr.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" }}
+{{- end }}
+
+{{/*
+Common labels
+*/}}
+{{- define "stx-repomgr.labels" -}}
+helm.sh/chart: {{ include "stx-repomgr.chart" . }}
+{{ include "stx-repomgr.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end }}
+
+{{/*
+Selector labels
+*/}}
+{{- define "stx-repomgr.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "stx-repomgr.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end }}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "stx-repomgr.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create }}
+{{- default (include "stx-repomgr.fullname" .) .Values.serviceAccount.name }}
+{{- else }}
+{{- default "default" .Values.serviceAccount.name }}
+{{- end }}
+{{- end }}

stx/stx-build-tools-chart/stx-builder/dependency_chart/stx-aptly/stx-repomgr/templates/deployment.yaml

@@ -0,0 +1,60 @@
+---
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ include "stx-repomgr.fullname" . }}
+  labels:
+    {{- include "stx-repomgr.labels" . | nindent 4 }}
+spec:
+{{- if not .Values.autoscaling.enabled }}
+  replicas: {{ .Values.replicaCount }}
+{{- end }}
+  selector:
+    matchLabels:
+      {{- include "stx-repomgr.selectorLabels" . | nindent 6 }}
+  template:
+    metadata:
+    {{- with .Values.podAnnotations }}
+      annotations:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      labels:
+        {{- include "stx-repomgr.selectorLabels" . | nindent 8 }}
+    spec:
+      {{- with .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+      containers:
+        - name: {{ .Chart.Name }}
+          securityContext:
+            {{- toYaml .Values.securityContext | nindent 12 }}
+          image: "{{ .Values.image.repository }}:{{ .Values.image.tag | default .Chart.AppVersion }}"
+          imagePullPolicy: {{ .Values.image.pullPolicy }}
+          tty: true
+          volumeMounts:
+          - name: {{ .Values.volumeMounts.name }}
+            mountPath: {{ .Values.volumeMounts.mountPath}}
+
+          resources:
+            {{- toYaml .Values.resources | nindent 12 }}
+
+      volumes:
+      - name: {{ .Values.volumes.name }}
+        hostPath:
+          path: {{ .Values.volumes.hostPath.path }}
+
+      {{- with .Values.nodeSelector }}
+      nodeSelector:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.affinity }}
+      affinity:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.tolerations }}
+      tolerations:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}

stx/stx-build-tools-chart/stx-builder/dependency_chart/stx-aptly/stx-repomgr/templates/service.yaml

@@ -0,0 +1,20 @@
+---
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "stx-repomgr.fullname" . }}
+  labels:
+    {{- include "stx-repomgr.labels" . | nindent 4 }}
+spec:
+  type: {{ .Values.sendservice.type }}
+  ports:
+    - port: {{ .Values.sendservice.port }}
+      targetPort: 80
+      protocol: TCP
+      name: http-send
+    - port: {{ .Values.recvservice.port }}
+      targetPort: 8080
+      protocol: TCP
+      name: http-recv
+  selector:
+    {{- include "stx-repomgr.selectorLabels" . | nindent 4 }}

stx/stx-build-tools-chart/stx-builder/dependency_chart/stx-aptly/stx-repomgr/values.yaml

@@ -0,0 +1,71 @@
+# Default values for stx-repomgr.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+---
+replicaCount: 1
+
+image:
+  repository: stx-aptly
+  pullPolicy: IfNotPresent
+  # Overrides the image tag whose default is the chart appVersion.
+  tag: "v0.1.0"
+
+imagePullSecrets: []
+nameOverride: ""
+fullnameOverride: ""
+
+volumeMounts:
+  name: shared-workspace
+  mountPath: /var/aptly
+
+volumes:
+  name: shared-workspace
+  hostPath:
+    path: /workspace/aptly
+
+podAnnotations: {}
+
+podSecurityContext: {}
+# fsGroup: 2000
+
+securityContext: {}
+# capabilities:
+#   drop:
+#   - ALL
+# readOnlyRootFilesystem: true
+# runAsNonRoot: true
+# runAsUser: 1000
+
+sendservice:
+  type: ClusterIP
+  port: 80
+
+recvservice:
+  type: ClusterIP
+  port: 8080
+
+resources: {}
+# We usually recommend not to specify default resources and to leave this as a conscious
+# choice for the user. This also increases chances charts run on environments with little
+# resources, such as Minikube. If you do want to specify resources, uncomment the following
+# lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+# limits:
+#   cpu: 100m
+#   memory: 128Mi
+# requests:
+#   cpu: 100m
+#   memory: 128Mi
+
+autoscaling:
+  enabled: false
+  minReplicas: 1
+  maxReplicas: 100
+  targetCPUUtilizationPercentage: 80
+  # targetMemoryUtilizationPercentage: 80
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

stx/stx-build-tools-chart/stx-builder/dependency_chart/stx-lat-tool/.helmignore

@@ -0,0 +1,23 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*.orig
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
+.vscode/

stx/stx-build-tools-chart/stx-builder/dependency_chart/stx-lat-tool/Chart.yaml

@@ -0,0 +1,24 @@
+---
+apiVersion: v2
+name: stx-lat-tool
+description: A Helm chart for LAT Tool of the StarlingX Building Kubernetes
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+# Versions are expected to follow Semantic Versioning (https://semver.org/)
+version: 0.1.0
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application. Versions are not expected to
+# follow Semantic Versioning. They should reflect the version the application is using.
+appVersion: 1.16.0

stx/stx-build-tools-chart/stx-builder/dependency_chart/stx-lat-tool/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "stx-lat-tool.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" }}
+{{- end }}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "stx-lat-tool.fullname" -}}
+{{- if .Values.fullnameOverride }}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" }}
+{{- else }}
+{{- $name := default .Chart.Name .Values.nameOverride }}
+{{- if contains $name .Release.Name }}
+{{- .Release.Name | trunc 63 | trimSuffix "-" }}
+{{- else }}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" }}
+{{- end }}
+{{- end }}
+{{- end }}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "stx-lat-tool.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" }}
+{{- end }}
+
+{{/*
+Common labels
+*/}}
+{{- define "stx-lat-tool.labels" -}}
+helm.sh/chart: {{ include "stx-lat-tool.chart" . }}
+{{ include "stx-lat-tool.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end }}
+
+{{/*
+Selector labels
+*/}}
+{{- define "stx-lat-tool.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "stx-lat-tool.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end }}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "stx-lat-tool.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create }}
+{{- default (include "stx-lat-tool.fullname" .) .Values.serviceAccount.name }}
+{{- else }}
+{{- default "default" .Values.serviceAccount.name }}
+{{- end }}
+{{- end }}

stx/stx-build-tools-chart/stx-builder/dependency_chart/stx-lat-tool/templates/deployment.yaml

@@ -0,0 +1,60 @@
+---
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ include "stx-lat-tool.fullname" . }}
+  labels:
+    {{- include "stx-lat-tool.labels" . | nindent 4 }}
+spec:
+{{- if not .Values.autoscaling.enabled }}
+  replicas: {{ .Values.replicaCount }}
+{{- end }}
+  selector:
+    matchLabels:
+      {{- include "stx-lat-tool.selectorLabels" . | nindent 6 }}
+  template:
+    metadata:
+    {{- with .Values.podAnnotations }}
+      annotations:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      labels:
+        {{- include "stx-lat-tool.selectorLabels" . | nindent 8 }}
+    spec:
+      {{- with .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+      containers:
+        - name: {{ .Chart.Name }}
+          securityContext:
+            {{- toYaml .Values.securityContext | nindent 12 }}
+          image: "{{ .Values.image.repository }}:{{ .Values.image.tag | default .Chart.AppVersion }}"
+          imagePullPolicy: {{ .Values.image.pullPolicy }}
+          tty: true
+          volumeMounts:
+          - name: {{ .Values.volumes.name }}
+            mountPath: {{ .Values.volumeMounts.mountPath}}
+
+          resources:
+            {{- toYaml .Values.resources | nindent 12 }}
+
+      volumes:
+      - name: {{ .Values.volumes.name }}
+        hostPath:
+          path: {{ .Values.volumes.hostPath.path }}
+
+      {{- with .Values.nodeSelector }}
+      nodeSelector:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.affinity }}
+      affinity:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.tolerations }}
+      tolerations:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}

stx/stx-build-tools-chart/stx-builder/dependency_chart/stx-lat-tool/values.yaml

@@ -0,0 +1,64 @@
+# Default values for stx-lat-tool.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+---
+replicaCount: 1
+
+image:
+  repository: stx-lat-tool
+  pullPolicy: IfNotPresent
+  # Overrides the image tag whose default is the chart appVersion.
+  tag: "v0.1.0"
+
+volumeMounts:
+  name: latd-shared-workspace
+  mountPath: /localdisk
+
+volumes:
+  name: latd-shared-workspace
+  hostPath:
+    path: /workspace/localdisk
+
+imagePullSecrets: []
+nameOverride: ""
+fullnameOverride: ""
+
+podAnnotations: {}
+
+podSecurityContext: {}
+# fsGroup: 2000
+
+securityContext:
+  privileged: true
+  # capabilities:
+  #   drop:
+  #   - ALL
+  # readOnlyRootFilesystem: true
+  # runAsNonRoot: true
+  # runAsUser: 1000
+
+resources: {}
+# We usually recommend not to specify default resources and to leave this as a conscious
+# choice for the user. This also increases chances charts run on environments with little
+# resources, such as Minikube. If you do want to specify resources, uncomment the following
+# lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+# limits:
+#   cpu: 100m
+#   memory: 128Mi
+# requests:
+#   cpu: 100m
+#   memory: 128Mi
+
+autoscaling:
+  enabled: false
+  minReplicas: 1
+  maxReplicas: 100
+  targetCPUUtilizationPercentage: 80
+  # targetMemoryUtilizationPercentage: 80
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

stx/stx-build-tools-chart/stx-builder/dependency_chart/stx-pkgbuilder/Chart.yaml

@@ -0,0 +1,24 @@
+---
+apiVersion: v2
+name: stx-pkgbuilder
+description: A Helm chart for Starlingx Building Kubernetes
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+# Versions are expected to follow Semantic Versioning (https://semver.org/)
+version: 0.1.0
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application. Versions are not expected to
+# follow Semantic Versioning. They should reflect the version the application is using.
+appVersion: 1.16.0

stx/stx-build-tools-chart/stx-builder/dependency_chart/stx-pkgbuilder/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "stx-pkgbuilder.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" }}
+{{- end }}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "stx-pkgbuilder.fullname" -}}
+{{- if .Values.fullnameOverride }}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" }}
+{{- else }}
+{{- $name := default .Chart.Name .Values.nameOverride }}
+{{- if contains $name .Release.Name }}
+{{- .Release.Name | trunc 63 | trimSuffix "-" }}
+{{- else }}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" }}
+{{- end }}
+{{- end }}
+{{- end }}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "stx-pkgbuilder.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" }}
+{{- end }}
+
+{{/*
+Common labels
+*/}}
+{{- define "stx-pkgbuilder.labels" -}}
+helm.sh/chart: {{ include "stx-pkgbuilder.chart" . }}
+{{ include "stx-pkgbuilder.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end }}
+
+{{/*
+Selector labels
+*/}}
+{{- define "stx-pkgbuilder.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "stx-pkgbuilder.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end }}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "stx-pkgbuilder.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create }}
+{{- default (include "stx-pkgbuilder.fullname" .) .Values.serviceAccount.name }}
+{{- else }}
+{{- default "default" .Values.serviceAccount.name }}
+{{- end }}
+{{- end }}

stx/stx-build-tools-chart/stx-builder/dependency_chart/stx-pkgbuilder/templates/configmap.yaml

@@ -0,0 +1,7 @@
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ .Values.volumes.configmapname }}
+data:
+{{ (.Files.Glob "configmap/stx*").AsConfig | indent 2 }}

stx/stx-build-tools-chart/stx-builder/dependency_chart/stx-pkgbuilder/templates/deployment.yaml

@@ -0,0 +1,65 @@
+---
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ include "stx-pkgbuilder.fullname" . }}
+  labels:
+    {{- include "stx-pkgbuilder.labels" . | nindent 4 }}
+spec:
+{{- if not .Values.autoscaling.enabled }}
+  replicas: {{ .Values.replicaCount }}
+{{- end }}
+  selector:
+    matchLabels:
+      {{- include "stx-pkgbuilder.selectorLabels" . | nindent 6 }}
+  template:
+    metadata:
+    {{- with .Values.podAnnotations }}
+      annotations:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      labels:
+        {{- include "stx-pkgbuilder.selectorLabels" . | nindent 8 }}
+    spec:
+      {{- with .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+      containers:
+        - name: {{ .Chart.Name }}
+          securityContext:
+            {{- toYaml .Values.securityContext | nindent 12 }}
+          image: "{{ .Values.image.repository }}:{{ .Values.image.tag | default .Chart.AppVersion }}"
+          imagePullPolicy: {{ .Values.image.pullPolicy }}
+          tty: true
+          volumeMounts:
+          - name: {{ .Values.volumeMounts.name }}
+            mountPath: {{ .Values.volumeMounts.mountPath}}
+          - name: {{ .Values.volumeMounts.envsetupname }}
+            mountPath: {{ .Values.volumeMounts.envsetupmountPath}}
+
+          resources:
+            {{- toYaml .Values.resources | nindent 12 }}
+
+      volumes:
+      - name: {{ .Values.volumes.name }}
+        hostPath:
+          path: {{ .Values.volumes.hostPath.path }}
+      - name: {{ .Values.volumes.envsetupname }}
+        configMap:
+          name: {{ .Values.volumes.configmapname }}
+
+      {{- with .Values.nodeSelector }}
+      nodeSelector:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.affinity }}
+      affinity:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.tolerations }}
+      tolerations:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}

stx/stx-build-tools-chart/stx-builder/dependency_chart/stx-pkgbuilder/templates/service.yaml

@@ -0,0 +1,16 @@
+---
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "stx-pkgbuilder.fullname" . }}
+  labels:
+    {{- include "stx-pkgbuilder.labels" . | nindent 4 }}
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    - port: {{ .Values.service.port }}
+      targetPort: 80
+      protocol: TCP
+      name: http
+  selector:
+    {{- include "stx-pkgbuilder.selectorLabels" . | nindent 4 }}

stx/stx-build-tools-chart/stx-builder/dependency_chart/stx-pkgbuilder/values.yaml

@@ -0,0 +1,73 @@
+# Default values for stx-pkgbuilder.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+---
+replicaCount: 1
+
+image:
+  repository: stx-pkgbuilder
+  pullPolicy: IfNotPresent
+  # Overrides the image tag whose default is the chart appVersion.
+  tag: "v0.1.0"
+
+volumeMounts:
+  name: shared-workspace
+  mountPath: /localdisk
+  envsetupname: env-setting
+  envsetupmountPath: /usr/local/bin/stx
+
+volumes:
+  name: shared-workspace
+  hostPath:
+    path: /workspace/localdisk
+  envsetupname: env-setting
+  configmapname: pkgbuilder
+
+imagePullSecrets: []
+nameOverride: ""
+fullnameOverride: ""
+
+podAnnotations: {}
+
+podSecurityContext: {}
+# fsGroup: 2000
+
+securityContext:
+  privileged: true
+  # capabilities:
+  #   drop:
+  #   - ALL
+  # readOnlyRootFilesystem: true
+  # runAsNonRoot: true
+  # runAsUser: 1000
+
+service:
+  type: ClusterIP
+  port: 8080
+
+resources: {}
+#  We usually recommend not to specify default resources and to leave this as
+#  a conscious choice for the user. This also increases chances charts run on
+#  environments with little resources, such as Minikube. If you do want to
+#  specify resources, uncomment the following lines, adjust them as necessary,
+#  and remove the curly braces after 'resources:'.
+#  limits:
+#    cpu: 100m
+#    memory: 128Mi
+#  requests:
+#    cpu: 100m
+#    memory: 128Mi
+
+autoscaling:
+  enabled: false
+  minReplicas: 1
+  maxReplicas: 100
+  targetCPUUtilizationPercentage: 80
+  # targetMemoryUtilizationPercentage: 80
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

stx/stx-build-tools-chart/stx-builder/dependency_chart/stx-pulp/stx-repomgr/Chart.yaml

@@ -0,0 +1,24 @@
+---
+apiVersion: v2
+name: stx-repomgr
+description: A Helm chart for Starlingx Building Kubernetes
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+# Versions are expected to follow Semantic Versioning (https://semver.org/)
+version: 0.1.0
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application. Versions are not expected to
+# follow Semantic Versioning. They should reflect the version the application is using.
+appVersion: 1.16.0

stx/stx-build-tools-chart/stx-builder/dependency_chart/stx-pulp/stx-repomgr/configmap/changepasswd

@@ -0,0 +1,3 @@
+#!/bin/bash
+
+pulpcore-manager reset-admin-password -p admin

stx/stx-build-tools-chart/stx-builder/dependency_chart/stx-pulp/stx-repomgr/configmap/settings.py

@@ -0,0 +1,4 @@
+CONTENT_ORIGIN = 'http://${PROJECT}-stx-pulp:8080'
+ANSIBLE_API_HOSTNAME = 'http://${PROJECT}-stx-pulp:8080'
+ANSIBLE_CONTENT_HOSTNAME = 'http://${PROJECT}-stx-pulp:8080/pulp/content'
+TOKEN_AUTH_DISABLED = True

stx/stx-build-tools-chart/stx-builder/dependency_chart/stx-pulp/stx-repomgr/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "stx-repomgr.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" }}
+{{- end }}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "stx-repomgr.fullname" -}}
+{{- if .Values.fullnameOverride }}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" }}
+{{- else }}
+{{- $name := default .Chart.Name .Values.nameOverride }}
+{{- if contains $name .Release.Name }}
+{{- .Release.Name | trunc 63 | trimSuffix "-" }}
+{{- else }}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" }}
+{{- end }}
+{{- end }}
+{{- end }}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "stx-repomgr.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" }}
+{{- end }}
+
+{{/*
+Common labels
+*/}}
+{{- define "stx-repomgr.labels" -}}
+helm.sh/chart: {{ include "stx-repomgr.chart" . }}
+{{ include "stx-repomgr.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end }}
+
+{{/*
+Selector labels
+*/}}
+{{- define "stx-repomgr.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "stx-repomgr.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end }}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "stx-repomgr.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create }}
+{{- default (include "stx-repomgr.fullname" .) .Values.serviceAccount.name }}
+{{- else }}
+{{- default "default" .Values.serviceAccount.name }}
+{{- end }}
+{{- end }}

stx/stx-build-tools-chart/stx-builder/dependency_chart/stx-pulp/stx-repomgr/templates/configmap.yaml

@@ -0,0 +1,7 @@
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ .Values.volumes.configmapname }}
+data:
+{{ (.Files.Glob "configmap/*").AsConfig | indent 2 }}

stx/stx-build-tools-chart/stx-builder/dependency_chart/stx-pulp/stx-repomgr/templates/deployment.yaml

@@ -0,0 +1,75 @@
+---
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ include "stx-repomgr.fullname" . }}
+  labels:
+    {{- include "stx-repomgr.labels" . | nindent 4 }}
+spec:
+{{- if not .Values.autoscaling.enabled }}
+  replicas: {{ .Values.replicaCount }}
+{{- end }}
+  selector:
+    matchLabels:
+      {{- include "stx-repomgr.selectorLabels" . | nindent 6 }}
+  template:
+    metadata:
+    {{- with .Values.podAnnotations }}
+      annotations:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      labels:
+        {{- include "stx-repomgr.selectorLabels" . | nindent 8 }}
+    spec:
+      {{- with .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+      containers:
+        - name: {{ .Chart.Name }}
+          securityContext:
+            {{- toYaml .Values.securityContext | nindent 12 }}
+          image: "{{ .Values.image.repository }}:{{ .Values.image.tag | default .Chart.AppVersion }}"
+          imagePullPolicy: {{ .Values.image.pullPolicy }}
+          tty: true
+          volumeMounts:
+          - name: {{ .Values.volumeMounts.name }}
+            mountPath: {{ .Values.volumeMounts.mountPath}}
+          - name: {{ .Values.volumeMounts.storagename }}
+            mountPath: {{ .Values.volumeMounts.storagemountPath}}
+          - name: {{ .Values.volumeMounts.pgsqlname }}
+            mountPath: {{ .Values.volumeMounts.pgsqlmountPath}}
+          - name: {{ .Values.volumeMounts.containersname }}
+            mountPath: {{ .Values.volumeMounts.containersmountPath}}
+
+          resources:
+            {{- toYaml .Values.resources | nindent 12 }}
+
+      volumes:
+      - name: {{ .Values.volumes.name }}
+        configMap:
+          name: {{ .Values.volumes.configmapname }}
+      - name: {{ .Values.volumes.storagename }}
+        hostPath:
+          path: {{ .Values.volumes.storagehostPath.path }}
+      - name: {{ .Values.volumes.pgsqlname }}
+        hostPath:
+          path: {{ .Values.volumes.pgsqlhostPath.path }}
+      - name: {{ .Values.volumes.containersname }}
+        hostPath:
+          path: {{ .Values.volumes.containershostPath.path }}
+
+      {{- with .Values.nodeSelector }}
+      nodeSelector:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.affinity }}
+      affinity:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.tolerations }}
+      tolerations:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}

stx/stx-build-tools-chart/stx-builder/dependency_chart/stx-pulp/stx-repomgr/templates/service.yaml

@@ -0,0 +1,16 @@
+---
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "stx-repomgr.fullname" . }}
+  labels:
+    {{- include "stx-repomgr.labels" . | nindent 4 }}
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    - port: {{ .Values.service.port }}
+      targetPort: 80
+      protocol: TCP
+      name: http
+  selector:
+    {{- include "stx-repomgr.selectorLabels" . | nindent 4 }}

stx/stx-build-tools-chart/stx-builder/dependency_chart/stx-pulp/stx-repomgr/values.yaml

@@ -0,0 +1,81 @@
+# Default values for stx-repomgr.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+---
+replicaCount: 1
+
+image:
+  repository: stx-pulp
+  pullPolicy: IfNotPresent
+  # Overrides the image tag whose default is the chart appVersion.
+  tag: "v0.1.0"
+
+volumeMounts:
+  name: pulp-setting
+  mountPath: /etc/pulp
+  storagename: pulp-storage
+  storagemountPath: /var/lib/pulp
+  pgsqlname: pulp-pgsql
+  pgsqlmountPath: /var/lib/pgsql
+  containersname: pulp-containers
+  containersmountPath: /var/lib/containers
+
+volumes:
+  name: pulp-setting
+  configmapname: pulp
+  storagename: pulp-storage
+  storagehostPath:
+    path: /workspace/pulp/pulp-storage
+  pgsqlname: pulp-pgsql
+  pgsqlhostPath:
+    path: /workspace/pulp/pulp-pgsql
+  containersname: pulp-containers
+  containershostPath:
+    path: /workspace/pulp/pulp-containers
+
+imagePullSecrets: []
+nameOverride: ""
+fullnameOverride: ""
+
+podAnnotations: {}
+
+podSecurityContext: {}
+# fsGroup: 2000
+
+securityContext: {}
+# capabilities:
+#   drop:
+#   - ALL
+# readOnlyRootFilesystem: true
+# runAsNonRoot: true
+# runAsUser: 1000
+
+service:
+  type: ClusterIP
+  port: 8080
+
+resources: {}
+# We usually recommend not to specify default resources and to leave this as a conscious
+# choice for the user. This also increases chances charts run on environments with little
+# resources, such as Minikube. If you do want to specify resources, uncomment the following
+# lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+# limits:
+#   cpu: 100m
+#   memory: 128Mi
+# requests:
+#   cpu: 100m
+#   memory: 128Mi
+
+autoscaling:
+  enabled: false
+  minReplicas: 1
+  maxReplicas: 100
+  targetCPUUtilizationPercentage: 80
+  # targetMemoryUtilizationPercentage: 80
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

stx/stx-build-tools-chart/stx-builder/templates/_helpers.tpl

@@ -0,0 +1,52 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "stx-builder.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" }}
+{{- end }}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "stx-builder.fullname" -}}
+{{- if .Values.fullnameOverride }}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" }}
+{{- else }}
+{{- $name := default .Chart.Name .Values.nameOverride }}
+{{- if contains $name .Release.Name }}
+{{- .Release.Name | trunc 63 | trimSuffix "-" }}
+{{- else }}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" }}
+{{- end }}
+{{- end }}
+{{- end }}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "stx-builder.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" }}
+{{- end }}
+
+{{/*
+Common labels
+*/}}
+{{- define "stx-builder.labels" -}}
+helm.sh/chart: {{ include "stx-builder.chart" . }}
+{{ include "stx-builder.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end }}
+
+{{/*
+Selector labels
+*/}}
+{{- define "stx-builder.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "stx-builder.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end }}

stx/stx-build-tools-chart/stx-builder/templates/configmap.yaml

@@ -0,0 +1,7 @@
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ .Values.volumes.configmapname }}
+data:
+{{ (.Files.Glob "configmap/stx*").AsConfig | indent 2 }}

stx/stx-build-tools-chart/stx-builder/templates/deployment.yaml

@@ -0,0 +1,65 @@
+---
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ include "stx-builder.fullname" . }}
+  labels:
+    {{- include "stx-builder.labels" . | nindent 4 }}
+spec:
+{{- if not .Values.autoscaling.enabled }}
+  replicas: {{ .Values.replicaCount }}
+{{- end }}
+  selector:
+    matchLabels:
+      {{- include "stx-builder.selectorLabels" . | nindent 6 }}
+  template:
+    metadata:
+    {{- with .Values.podAnnotations }}
+      annotations:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      labels:
+        {{- include "stx-builder.selectorLabels" . | nindent 8 }}
+    spec:
+      {{- with .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+      containers:
+        - name: {{ .Chart.Name }}
+          securityContext:
+            {{- toYaml .Values.securityContext | nindent 12 }}
+          image: "{{ .Values.image.repository }}:{{ .Values.image.tag | default .Chart.AppVersion }}"
+          imagePullPolicy: {{ .Values.image.pullPolicy }}
+          tty: true
+          volumeMounts:
+          - name: {{ .Values.volumeMounts.name }}
+            mountPath: {{ .Values.volumeMounts.mountPath}}
+          - name: {{ .Values.volumeMounts.usersetupname }}
+            mountPath: {{ .Values.volumeMounts.usersetupmountPath}}
+
+          resources:
+            {{- toYaml .Values.resources | nindent 12 }}
+
+      volumes:
+      - name: {{ .Values.volumes.name }}
+        hostPath:
+          path: {{ .Values.volumes.hostPath.path }}
+      - name: {{ .Values.volumes.usersetupname }}
+        configMap:
+          name: {{ .Values.volumes.configmapname }}
+
+      {{- with .Values.nodeSelector }}
+      nodeSelector:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.affinity }}
+      affinity:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.tolerations }}
+      tolerations:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}

stx/stx-build-tools-chart/stx-builder/values.yaml

@@ -0,0 +1,67 @@
+# Default values for stx-builder.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+---
+replicaCount: 1
+
+image:
+  repository: stx-builder
+  pullPolicy: IfNotPresent
+  # Overrides the image tag whose default is the chart appVersion.
+  tag: "v0.1.0"
+
+volumeMounts:
+  name: shared-workspace
+  mountPath: /localdisk
+  usersetupname: user-setting
+  usersetupmountPath: /usr/local/bin/stx
+
+volumes:
+  name: shared-workspace
+  hostPath:
+    path: /workspace/localdisk
+  usersetupname: user-setting
+  configmapname: builder
+
+imagePullSecrets: []
+nameOverride: ""
+fullnameOverride: ""
+
+podAnnotations: {}
+
+podSecurityContext: {}
+# fsGroup: 2000
+
+securityContext: {}
+# capabilities:
+#   drop:
+#   - ALL
+# readOnlyRootFilesystem: true
+# runAsNonRoot: true
+# runAsUser: 1000
+
+resources: {}
+# We usually recommend not to specify default resources and to leave this as a conscious
+# choice for the user. This also increases chances charts run on environments with little
+# resources, such as Minikube. If you do want to specify resources, uncomment the following
+# lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+# limits:
+#   cpu: 100m
+#   memory: 128Mi
+# requests:
+#   cpu: 100m
+#   memory: 128Mi
+
+autoscaling:
+  enabled: false
+  minReplicas: 1
+  maxReplicas: 100
+  targetCPUUtilizationPercentage: 80
+  # targetMemoryUtilizationPercentage: 80
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

test-requirements.txt

@@ -2,3 +2,4 @@ bashate >= 0.2
 PyYAML>=3.1.0
 yamllint>=0.5.2
 hacking>=2.0<2.1
+astroid <= 2.2.5

tox.ini

@@ -19,9 +19,10 @@ basepython = python3
 #  E040 - false positive on |& syntax (new in bash 4)
 whitelist_externals = bash
 commands =
-  bash -c "find {toxinidir}        \
-            \( -name .tox -prune \)         \
-            -o -type f -name '*.yaml'       \
+  bash -c "find {toxinidir}                              \
+            \( -name .tox -prune \)                      \
+            -o -type f -name '*.yaml'                    \
+            -not \( -type f -path *template* -prune \)   \
             -print0 | xargs -0 yamllint"
   bash -c "find {toxinidir}          \
          -not \( -type d -name .?\* -prune \) \