aa23b041b1
Copy mirror repo files to /etc/yum.repos.d because tb.sh needs them.
This change fixes a problem introduced by
Commit: 78263e8784
Dockerfile: pin centos & epel repo versions
that caused centos-mirror-tools/download_mirror.sh to fail when executed
from a docker container created by tb.sh -- "rpm not found" for most
packages being downloaded.
This is because download_mirror.sh without additional arguments expects
toCOPY/yum.repos.d/ files to have been copied to /etc/yum.repos.d/ in the
docker container by default.
Change-Id: If214aea6560632837d0f196c21801fc2d06c8259
Closes-Bug: 1885624
Signed-off-by: Davlet Panech <davlet.panech@windriver.com>
271 lines
12 KiB
Docker
271 lines
12 KiB
Docker
# Licensed under the Apache License, Version 2.0 (the "License");
|
|
# you may not use this file except in compliance with the License.
|
|
# You may obtain a copy of the License at
|
|
#
|
|
# http://www.apache.org/licenses/LICENSE-2.0
|
|
#
|
|
# Unless required by applicable law or agreed to in writing, software
|
|
# distributed under the License is distributed on an "AS IS" BASIS,
|
|
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
# See the License for the specific language governing permissions and
|
|
# limitations under the License.
|
|
#
|
|
# Copyright (C) 2019 Intel Corporation
|
|
#
|
|
|
|
FROM centos:7.8.2003
|
|
|
|
# Proxy configuration
|
|
#ENV http_proxy "http://your.actual_http_proxy.com:your_port"
|
|
#ENV https_proxy "https://your.actual_https_proxy.com:your_port"
|
|
#ENV ftp_proxy "http://your.actual_ftp_proxy.com:your_port"
|
|
|
|
#RUN echo "proxy=$http_proxy" >> /etc/yum.conf && \
|
|
# echo -e "export http_proxy=$http_proxy\nexport https_proxy=$https_proxy\n\
|
|
#export ftp_proxy=$ftp_proxy" >> /root/.bashrc
|
|
|
|
# username you will docker exec into the container as.
|
|
# It should NOT be your host username so you can easily tell
|
|
# if you are in our out of the container.
|
|
ARG MYUNAME=builder
|
|
ARG MYUID=1000
|
|
# CentOS & EPEL URLs that match the base image
|
|
# Override these with --build-arg if you have a mirror
|
|
ARG CENTOS_7_8_URL=http://mirror.centos.org/centos/7.8.2003
|
|
ARG EPEL_7_8_URL=https://archives.fedoraproject.org/pub/archive/epel/7.2020-04-20
|
|
|
|
ENV container=docker
|
|
|
|
# Lock down centos & epel repos
|
|
RUN rm -f /etc/yum.repos.d/*
|
|
COPY toCOPY/yum.repos.d/*.repo /etc/yum.repos.d/
|
|
COPY centos-mirror-tools/rpm-gpg-keys/RPM-GPG-KEY-EPEL-7 /etc/pki/rpm-gpg/
|
|
RUN rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY* && \
|
|
echo "http_caching=packages" >> /etc/yum.conf && \
|
|
# yum variables must be in lower case ; \
|
|
echo "$CENTOS_7_8_URL" >/etc/yum/vars/centos_7_8_url && \
|
|
echo "$EPEL_7_8_URL" >/etc/yum/vars/epel_7_8_url && \
|
|
# disable fastestmirror plugin because we are not using mirrors ; \
|
|
# FIXME: use a mirrorlist URL for centos/vault/epel archives. I couldn't find one.
|
|
sed -i 's/enabled=1/enabled=0/' /etc/yum/pluginconf.d/fastestmirror.conf && \
|
|
yum clean all && \
|
|
yum makecache && \
|
|
yum install -y deltarpm
|
|
|
|
# Without this, init won't start the enabled services and exec'ing and starting
|
|
# them reports "Failed to get D-Bus connection: Operation not permitted".
|
|
VOLUME /run /tmp
|
|
|
|
# Download required dependencies by mirror/build processes.
|
|
RUN groupadd -g 751 cgts && \
|
|
echo "mock:x:751:root" >> /etc/group && \
|
|
echo "mockbuild:x:9001:" >> /etc/group && \
|
|
yum install -y anaconda \
|
|
anaconda-runtime \
|
|
autoconf-archive \
|
|
autogen \
|
|
automake \
|
|
bc \
|
|
bind \
|
|
bind-utils \
|
|
bison \
|
|
cpanminus \
|
|
createrepo \
|
|
createrepo_c \
|
|
deltarpm \
|
|
docker-client \
|
|
expat-devel \
|
|
flex \
|
|
isomd5sum \
|
|
gcc \
|
|
gettext \
|
|
git \
|
|
libguestfs-tools \
|
|
libtool \
|
|
libxml2 \
|
|
lighttpd \
|
|
lighttpd-fastcgi \
|
|
lighttpd-mod_geoip \
|
|
net-tools \
|
|
mkisofs \
|
|
http://mirror.starlingx.cengn.ca/mirror/centos/epel/dl.fedoraproject.org/pub/epel/7/x86_64/Packages/m/mock-1.4.16-1.el7.noarch.rpm \
|
|
http://mirror.starlingx.cengn.ca/mirror/centos/epel/dl.fedoraproject.org/pub/epel/7/x86_64/Packages/m/mock-core-configs-31.6-1.el7.noarch.rpm \
|
|
mongodb \
|
|
mongodb-server \
|
|
pax \
|
|
perl-CPAN \
|
|
python-deltarpm \
|
|
python-pep8 \
|
|
python-pip \
|
|
python-psutil \
|
|
python2-psutil \
|
|
python36-psutil \
|
|
python3-devel \
|
|
python-sphinx \
|
|
python-subunit \
|
|
python-testrepository \
|
|
python-tox \
|
|
python-yaml \
|
|
postgresql \
|
|
qemu-kvm \
|
|
quilt \
|
|
rpm-build \
|
|
rpm-sign \
|
|
rpm-python \
|
|
squashfs-tools \
|
|
sudo \
|
|
systemd \
|
|
syslinux \
|
|
udisks2 \
|
|
vim-enhanced \
|
|
wget
|
|
|
|
# This image requires a set of scripts and helpers
|
|
# for working correctly, in this section they are
|
|
# copied inside the image.
|
|
COPY toCOPY/finishSetup.sh /usr/local/bin
|
|
COPY toCOPY/populate_downloads.sh /usr/local/bin
|
|
COPY toCOPY/generate-cgcs-tis-repo /usr/local/bin
|
|
COPY toCOPY/generate-cgcs-centos-repo.sh /usr/local/bin
|
|
COPY toCOPY/lst_utils.sh /usr/local/bin
|
|
COPY toCOPY/.inputrc /home/$MYUNAME/
|
|
COPY toCOPY/builder-constraints.txt /home/$MYUNAME/
|
|
|
|
# cpan modules, installing with cpanminus to avoid stupid questions since cpan is whack
|
|
RUN cpanm --notest Fatal && \
|
|
cpanm --notest XML::SAX && \
|
|
cpanm --notest XML::SAX::Expat && \
|
|
cpanm --notest XML::Parser && \
|
|
cpanm --notest XML::Simple
|
|
|
|
# pip installs
|
|
RUN pip install -c /home/$MYUNAME/builder-constraints.txt python-subunit junitxml --upgrade && \
|
|
pip install -c /home/$MYUNAME/builder-constraints.txt tox --upgrade
|
|
|
|
# Install repo tool
|
|
RUN curl https://storage.googleapis.com/git-repo-downloads/repo > /usr/local/bin/repo && \
|
|
chmod a+x /usr/local/bin/repo
|
|
|
|
# installing go and setting paths
|
|
ENV GOPATH="/usr/local/go"
|
|
ENV PATH="${GOPATH}/bin:${PATH}"
|
|
RUN yum install -y golang && \
|
|
mkdir -p ${GOPATH}/bin && \
|
|
curl https://raw.githubusercontent.com/golang/dep/master/install.sh | sh
|
|
|
|
# mock time
|
|
# forcing chroots since a couple of packages naughtily insist on network access and
|
|
# we dont have nspawn and networks happy together.
|
|
RUN useradd -s /sbin/nologin -u 9001 -g 9001 mockbuild && \
|
|
rmdir /var/lib/mock && \
|
|
ln -s /localdisk/loadbuild/mock /var/lib/mock && \
|
|
rmdir /var/cache/mock && \
|
|
ln -s /localdisk/loadbuild/mock-cache /var/cache/mock && \
|
|
echo "config_opts['use_nspawn'] = False" >> /etc/mock/site-defaults.cfg && \
|
|
echo "config_opts['rpmbuild_networking'] = True" >> /etc/mock/site-defaults.cfg && \
|
|
echo >> /etc/mock/site-defaults.cfg
|
|
|
|
# Inherited tools for mock stuff
|
|
# we at least need the mock_cache_unlock tool
|
|
# they install into /usr/bin
|
|
COPY toCOPY/mock_overlay /opt/mock_overlay
|
|
RUN cd /opt/mock_overlay && \
|
|
make && \
|
|
make install
|
|
|
|
# ENV setup
|
|
RUN echo "# Load stx-builder configuration" >> /etc/profile.d/stx-builder-conf.sh && \
|
|
echo "if [[ -r \${HOME}/buildrc ]]; then" >> /etc/profile.d/stx-builder-conf.sh && \
|
|
echo " source \${HOME}/buildrc" >> /etc/profile.d/stx-builder-conf.sh && \
|
|
echo " export PROJECT SRC_BUILD_ENVIRONMENT MYPROJECTNAME MYUNAME" >> /etc/profile.d/stx-builder-conf.sh && \
|
|
echo " export MY_BUILD_CFG MY_BUILD_CFG_RT MY_BUILD_CFG_STD MY_BUILD_DIR MY_BUILD_ENVIRONMENT MY_BUILD_ENVIRONMENT_FILE MY_BUILD_ENVIRONMENT_FILE_RT MY_BUILD_ENVIRONMENT_FILE_STD MY_DEBUG_BUILD_CFG_RT MY_DEBUG_BUILD_CFG_STD MY_LOCAL_DISK MY_MOCK_ROOT MY_REPO MY_REPO_ROOT_DIR MY_SRC_RPM_BUILD_DIR MY_RELEASE MY_WORKSPACE LAYER" >> /etc/profile.d/stx-builder-conf.sh && \
|
|
echo "fi" >> /etc/profile.d/stx-builder-conf.sh && \
|
|
echo "export FORMAL_BUILD=0" >> /etc/profile.d/stx-builder-conf.sh && \
|
|
echo "export PATH=\$MY_REPO/build-tools:\$PATH" >> /etc/profile.d/stx-builder-conf.sh
|
|
|
|
# centos locales are broken. this needs to be run after the last yum install/update
|
|
RUN localedef -i en_US -f UTF-8 en_US.UTF-8
|
|
|
|
# setup
|
|
RUN mkdir -p /www/run && \
|
|
mkdir -p /www/logs && \
|
|
mkdir -p /www/home && \
|
|
mkdir -p /www/root/htdocs/localdisk && \
|
|
chown -R $MYUID:cgts /www && \
|
|
ln -s /localdisk/loadbuild /www/root/htdocs/localdisk/loadbuild && \
|
|
ln -s /import/mirrors/CentOS /www/root/htdocs/CentOS && \
|
|
ln -s /import/mirrors/fedora /www/root/htdocs/fedora && \
|
|
ln -s /localdisk/designer /www/root/htdocs/localdisk/designer
|
|
|
|
# lighthttpd setup
|
|
# chmod for /var/log/lighttpd fixes a centos issue
|
|
# in place sed for server root since it's expanded soon thereafter
|
|
# echo "server.bind = \"localhost\"" >> /etc/lighttpd/lighttpd.conf && \
|
|
RUN echo "$MYUNAME ALL=(ALL:ALL) NOPASSWD:ALL" >> /etc/sudoers && \
|
|
mkdir -p /var/log/lighttpd && \
|
|
chmod a+rwx /var/log/lighttpd/ && \
|
|
sed -i 's%^var\.log_root.*$%var.log_root = "/www/logs"%g' /etc/lighttpd/lighttpd.conf && \
|
|
sed -i 's%^var\.server_root.*$%var.server_root = "/www/root"%g' /etc/lighttpd/lighttpd.conf && \
|
|
sed -i 's%^var\.home_dir.*$%var.home_dir = "/www/home"%g' /etc/lighttpd/lighttpd.conf && \
|
|
sed -i 's%^var\.state_dir.*$%var.state_dir = "/www/run"%g' /etc/lighttpd/lighttpd.conf && \
|
|
sed -i "s/server.port/#server.port/g" /etc/lighttpd/lighttpd.conf && \
|
|
sed -i "s/server.use-ipv6/#server.use-ipv6/g" /etc/lighttpd/lighttpd.conf && \
|
|
sed -i "s/server.username/#server.username/g" /etc/lighttpd/lighttpd.conf && \
|
|
sed -i "s/server.groupname/#server.groupname/g" /etc/lighttpd/lighttpd.conf && \
|
|
sed -i "s/server.bind/#server.bind/g" /etc/lighttpd/lighttpd.conf && \
|
|
sed -i "s/server.document-root/#server.document-root/g" /etc/lighttpd/lighttpd.conf && \
|
|
sed -i "s/server.dirlisting/#server.dirlisting/g" /etc/lighttpd/lighttpd.conf && \
|
|
echo "server.port = 8088" >> /etc/lighttpd/lighttpd.conf && \
|
|
echo "server.use-ipv6 = \"disable\"" >> /etc/lighttpd/lighttpd.conf && \
|
|
echo "server.username = \"$MYUNAME\"" >> /etc/lighttpd/lighttpd.conf && \
|
|
echo "server.groupname = \"cgts\"" >> /etc/lighttpd/lighttpd.conf && \
|
|
echo "server.bind = \"localhost\"" >> /etc/lighttpd/lighttpd.conf && \
|
|
echo "server.document-root = \"/www/root/htdocs\"" >> /etc/lighttpd/lighttpd.conf && \
|
|
sed -i "s/dir-listing.activate/#dir-listing.activate/g" /etc/lighttpd/conf.d/dirlisting.conf && \
|
|
echo "dir-listing.activate = \"enable\"" >> /etc/lighttpd/conf.d/dirlisting.conf
|
|
|
|
# Systemd Enablement
|
|
RUN (cd /lib/systemd/system/sysinit.target.wants/; for i in *; do [ $i == systemd-tmpfiles-setup.service ] || rm -f $i; done); \
|
|
rm -f /lib/systemd/system/multi-user.target.wants/*;\
|
|
rm -f /etc/systemd/system/*.wants/*;\
|
|
rm -f /lib/systemd/system/local-fs.target.wants/*; \
|
|
rm -f /lib/systemd/system/sockets.target.wants/*udev*; \
|
|
rm -f /lib/systemd/system/sockets.target.wants/*initctl*; \
|
|
rm -f /lib/systemd/system/basic.target.wants/*;\
|
|
rm -f /lib/systemd/system/anaconda.target.wants/*
|
|
|
|
RUN useradd -r -u $MYUID -g cgts -m $MYUNAME && \
|
|
ln -s /home/$MYUNAME/.ssh /mySSH && \
|
|
rsync -av /etc/skel/ /home/$MYUNAME/
|
|
|
|
# now that we are doing systemd, make the startup script be in bashrc
|
|
# also we need to SHADOW the udev centric mkefiboot script with a sudo centric one
|
|
RUN echo "bash -C /usr/local/bin/finishSetup.sh" >> /home/$MYUNAME/.bashrc && \
|
|
echo "export PATH=/usr/local/bin:/localdisk/designer/$MYUNAME/bin:\$PATH" >> /home/$MYUNAME/.bashrc && \
|
|
chmod a+x /usr/local/bin/*
|
|
|
|
# Genrate a git configuration file in order to save an extra step
|
|
# for end users, this file is required by "repo" tool.
|
|
RUN chown $MYUNAME /home/$MYUNAME && \
|
|
runuser -u $MYUNAME -- git config --global user.email $MYUNAME@starlingx.com && \
|
|
runuser -u $MYUNAME -- git config --global user.name $MYUNAME && \
|
|
runuser -u $MYUNAME -- git config --global color.ui false
|
|
|
|
# Customizations for mirror creation
|
|
RUN rm /etc/yum.repos.d/*
|
|
COPY centos-mirror-tools/yum.repos.d/* /etc/yum.repos.d/
|
|
COPY centos-mirror-tools/rpm-gpg-keys/* /etc/pki/rpm-gpg/
|
|
|
|
# Import GPG keys
|
|
RUN rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY*
|
|
|
|
# Try to continue a yum command even if a StarlingX repo is unavailable.
|
|
RUN yum-config-manager --setopt=StarlingX\*.skip_if_unavailable=1 --save
|
|
|
|
# When we run 'init' below, it will run systemd, and systemd requires RTMIN+3
|
|
# to exit cleanly. By default, docker stop uses SIGTERM, which systemd ignores.
|
|
STOPSIGNAL RTMIN+3
|
|
|
|
# Don't know if it's possible to run services without starting this
|
|
CMD /usr/sbin/init
|