-- ================================================================== -- Copyright (C) 2006 by HUAWEI TECHNOLOGIES. All rights reserved. -- -- Description: HUAWEI VPLS Management Extended MIB -- Reference: -- Version: V1.0 -- History: -- V1.0 PanJun, 2006-05-08, publish -- ================================================================== HUAWEI-VPLS-EXT-MIB DEFINITIONS ::= BEGIN IMPORTS hwDatacomm FROM HUAWEI-MIB InterfaceIndex,InterfaceIndexOrZero,ifName FROM IF-MIB OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF sysUpTime FROM SNMPv2-MIB IpAddress,TimeTicks,Unsigned32, Counter64, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString, RowStatus, TruthValue, TEXTUAL-CONVENTION,DateAndTime FROM SNMPv2-TC VrId FROM VRRP-MIB EnabledStatus FROM P-BRIDGE-MIB; hwL2VpnVplsExt MODULE-IDENTITY LAST-UPDATED "200704122100Z" -- April 12, 2007 at 21:00 GMT ORGANIZATION "Huawei Technologies Co., Ltd." CONTACT-INFO "R&D BeiJing, Huawei Technologies co.,Ltd. Huawei Bld.,NO.3 Xinxi Rd., Shang-Di Information Industry Base, Hai-Dian District Beijing P.R. China Zip:100085 Http://www.huawei.com E-mail:support@huawei.com" DESCRIPTION "The HUAWEI-VPLS-EXT-MIB contains objects to manage VPLS." ::= { hwL2Vpn 1 } -- -- Textual conventions -- HWL2VpnVcEncapsType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An indication of the L2Vpn's VC encapsulation type: Frame Relay DLCI ( Martini Mode ) (1) ATM AAL5 SDU VCC transport (2) ATM transparent cell transport (3) Vlan (4) Ethernet (5) HDLC (6) PPP (7) SONET/SDH Circuit Emulation Service Over MPLS (CEM) (8) ATM n-to-one VCC cell transport (9) ATM n-to-one VPC cell transport (10) IP Layer2 Transport (11) ATM one-to-one VCC Cell Mode (12) ATM one-to-one VPC Cell Mode (13) ATM AAL5 PDU VCC transport (14) Frame-Relay Port mode (15) SONET/SDH Circuit Emulation over Packet (CEP) (16) Structure-agnostic E1 over Packet (SAE1oP) (17) Structure-agnostic T1 (DS1) over Packet (SAT1oP) (18) Structure-agnostic E3 over Packet (SAE3oP) (19) Structure-agnostic T3 (DS3) over Packet (SAT3oP) (20) CESoPSN basic mode (21) TDMoIP basic mode (22) CESoPSN TDM with CAS (23) TDMoIP TDM with CAS (24) Frame Relay DLCI (25) IP-interworking (64) unknown (255) " SYNTAX INTEGER { frameRelayDlciMartini(1), atmAal5SduVccTransport(2), atmTransparentCellTransport(3), vlan(4), ethernet(5), hdlc(6), ppp(7), cem(8), atmN2OneVccCellTransport(9), atmN2OneVpcCellTransport(10), ipLayer2Transport(11), atmOne2OneVccCellMode(12), atmOne2OneVpcCellMode(13), atmAal5PduVccTransport(14), frameRelayPortMode(15), cep(16), saE1oP(17), saT1oP(18), saE3oP(19), saT3oP(20), cESoPsnBasicMode(21), tDMoIPbasicMode(22), l2VpnCESoPSNTDMwithCAS(23), l2VpnTDMoIPTDMwithCAS(24), frameRelayDlci(25), ipInterworking(64), unknown(255) } HWEnableValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents a boolean value." SYNTAX INTEGER { enable(1), disable(2) } HWL2VpnStateChangeReason ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The type indicates the reason of VC's or VSI's status change: Invalid reason type (1) VC Created (2) VC Deleted (3) LDP Session Down (4) LDP Session Up (5) LDP Same Mapping Received with different label or MTU (6) LDP Same Mapping Received Interface Parameter matching (7) LDP Mapping Received Inteface Parameter UnMatched(8) LDP Mapping Received UnPass CBit Check(9) LDP Mapping Received UnPass PW Loop Check(10) LDP New Mapping Received (11) LDP New Mapping Received but Remote VC Down(12) LDP Withdrawn Received (13) LDP Release Received (14) LDP Request Received (15) LDP GR End processing (16) RSVP message received (17) Interface Up (18) Interface Down (19) Interface encapsulation changed (20) Refresh (21) Download Again (22) Tunnel Up (23) Tunnel Down (24) VC state change when New RLB Received (25) RLB Deleted (26) VC created or turned to another remote CE (27) Out Interface in Invalid state (28) Out Interface in Valid now (29) LDP Notification Forwarding (30) LDP Notification Not-Forwarding (31) PW Restart (32) Download FTN&ILM for EthernetTrunk(33) AC OAM Fault Detect Disable(34) Remote AC Fault(35) Remote AC Fault Resume(36) Local AC Fault(37) Local AC Fault Resume(38) Remote PSN Fault(39) Remote PSN Fault Resume(40) Local PSN Fault(41) Local PSN Fault Resume(42) BFD for PW State Change to:Down(43) BFD for PW State Change to:Up(44) BFD for PW State Change to:Admin Down(45) BFD for PW Disable(46) Manual Set Enable(47) Manual Set Disable(48) Delay Time Out(49) Resume Time Out(50) VRRP Master(51) VRRP Backup(52) VRRP Init(53) VRRP Delete(54) Track VRRP(55) Undo track VRRP(56) Lsp Ping Time Out(57) VC State Down when New RLB was Received(58) MTU Matched(59) MTU Unmatched(60) VSI was shuted(61) VSI was resumed(62) Set Admin VSI(63) Undo set Admin VSI(64) " SYNTAX INTEGER { invalidReason(1), vcCreated(2), vcDeleted(3), ldpSessionDown(4), ldpSessionUp(5), receivedDifLabelOrMtu(6), receivedIntfParaMatching(7), receivedIntfParaUnMatched(8), receivedUnPassCbitCheck(9), receivedUnPassPwLoopCheck(10), receivedNewMapping(11), receivedNewMappingButRemoteVcDown(12), receivedWithdrawn(13), receivedLdpRelease(14), receivedLdpRequest(15), ldpGrEndProcessing(16), receivedRsvpMessage(17), interfaceUp(18), interfaceDown(19), interfaceEncapChanged(20), refresh(21), downloadAgain(22), tunnelUp(23), tunnelDown(24), receivedNewRlb(25), deletedRlb(26), vcCreatedOrTurnedToAnother(27), outInterInInvalidState(28), outInterInValidNow(29), ldpNotifiForward(30), ldpNotifiNotForward(31), pwRestart(32), downloadFtnAndIlmForEthTrunk(33), acOamFaultDetectDisable(34), remoteAcFault(35), remoteAcFaultResume(36), localAcFault(37), localAcFaultResume(38), remotePsnFault(39), remotePsnFaultResume(40), localPsnFault(41), localPsnFaultResume(42), bfdForPwStateChangeToDown(43), bfdForPwStateChangeToUp(44), bfdForPwStateChangeToAdminDown(45), bfdForPwDisable(46), manualSetEnable(47), manualSetDisable(48), delayTimeOut(49), resumeTimeOut(50), vrrpMaster(51), vrrpBackup(52), vrrpInit(53), vrrpDelete(54), vrrpTrack(55), undoVrrpTrack(56), lspPingTimeOut(57), vcDownWhenReceivedNewRLB(58), mtuMatched(59), mtuUnmatched(60), vsiShut(61), vsiResume(62), setAdminVSI(63), undosetAdminVSI(64) } -- -- Node definitions -- hwL2Vpn OBJECT IDENTIFIER ::= { hwDatacomm 119 } -- -- The VPLS Attribute Group -- hwVplsMIBObjects OBJECT IDENTIFIER ::= { hwL2VpnVplsExt 1 } -- -- The VPLS Table -- hwVplsTable OBJECT-TYPE SYNTAX SEQUENCE OF HWVplsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is the VPLS's configuration table. Users can create or delete the VSI by it." ::= { hwVplsMIBObjects 1 } hwVplsEntry OBJECT-TYPE SYNTAX HWVplsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provides the information of a VPLS entry." INDEX { hwVplsVsiName } ::= { hwVplsTable 1 } HWVplsEntry ::= SEQUENCE { hwVplsVsiName DisplayString, hwVplsSignal INTEGER, hwVplsRD DisplayString, hwVplsVsiID Unsigned32, hwVplsVcType HWL2VpnVcEncapsType, hwVplsStatus INTEGER, hwVplsMtu Unsigned32, hwVplsTunnelPolicy DisplayString, hwVplsDescription DisplayString, hwVplsLearnStyle INTEGER, hwVplsMacLearnEnable HWEnableValue, hwVplsMacLimitEnable HWEnableValue, hwVplsStatisticsEnable HWEnableValue, hwVplsUnknowMulticast INTEGER, hwVplsUnknowUnicast INTEGER, hwVplsPreference Unsigned32, hwVplsVsiType INTEGER, hwVplsAdminVsiName DisplayString, hwVplsAcIsolateFlag HWEnableValue, hwVplsDiffServMode INTEGER, hwVplsDiffServServiceClass INTEGER, hwVplsDiffServColor INTEGER, hwVplsDiffServDSName OCTET STRING, hwVplsInterfaceWithdraw HWEnableValue, hwVplsUpe2NpeWithdraw HWEnableValue, hwVplsUpe2UpeWithdraw HWEnableValue, hwVplsNpe2UpeWithdraw HWEnableValue, hwVplsDiscovery INTEGER, hwVplsMacWithdrawEnable EnabledStatus, hwVplsVsiCir Unsigned32, hwVplsVsiPir Unsigned32, hwVplsVsiQosProfileName DisplayString, hwVplsAdminStatus INTEGER, hwVplsIgnoreAcState EnabledStatus, hwVplsEnableStatistic EnabledStatus, hwVplsResetStatistic INTEGER, hwVplsResetStatisticTime DateAndTime, hwVplsAgingTime Unsigned32, hwVplsUnknowUnicastMacLearning EnabledStatus, hwVplsFlowLabel EnabledStatus, hwVplsServiceName OCTET STRING, hwVplsRowStatus RowStatus } hwVplsVsiName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the VSI's name." ::= { hwVplsEntry 1 } hwVplsSignal OBJECT-TYPE SYNTAX INTEGER { ldp(1), bgp(2), unknown(255) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the signal type. If the signal type is LDP, VSI-ID must be designated. If the signal type is BGP, RD must be designated. The default value is unknown(255)." ::= { hwVplsEntry 2 } hwVplsRD OBJECT-TYPE SYNTAX DisplayString (SIZE (0 | 3..21)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the Route Distinguisher." ::= { hwVplsEntry 3 } hwVplsVsiID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the VSI id. The default value is 0." ::= { hwVplsEntry 4 } hwVplsVcType OBJECT-TYPE SYNTAX HWL2VpnVcEncapsType MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the VC's encapsulation type." ::= { hwVplsEntry 5 } hwVplsStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), admindown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the VPLS's status." ::= { hwVplsEntry 6 } hwVplsMtu OBJECT-TYPE SYNTAX Unsigned32 (328..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the VPLS's MTU.The default value is 1500." ::= { hwVplsEntry 7 } hwVplsTunnelPolicy OBJECT-TYPE SYNTAX DisplayString (SIZE (0..19)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the tunnel policy." ::= { hwVplsEntry 8 } hwVplsDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the description information." ::= { hwVplsEntry 9 } hwVplsLearnStyle OBJECT-TYPE SYNTAX INTEGER { qualify(1), unqualify(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the style of learning the MAC address." ::= { hwVplsEntry 10 } hwVplsMacLearnEnable OBJECT-TYPE SYNTAX HWEnableValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the enable sign of learning the MAC address." ::= { hwVplsEntry 11 } hwVplsMacLimitEnable OBJECT-TYPE SYNTAX HWEnableValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the enable sign of the MAC addresses number limit." ::= { hwVplsEntry 12 } hwVplsStatisticsEnable OBJECT-TYPE SYNTAX HWEnableValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the enable sign of statistics." ::= { hwVplsEntry 13 } hwVplsUnknowMulticast OBJECT-TYPE SYNTAX INTEGER { broadcast(1), drop(2), localHandle(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the processing mode when the multicast MAC entry not found in FDB." ::= { hwVplsEntry 14 } hwVplsUnknowUnicast OBJECT-TYPE SYNTAX INTEGER { broadcast(1), drop(2), localHandle(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the processing mode when the unicast MAC entry not found in FDB." ::= { hwVplsEntry 15 } hwVplsPreference OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the preference.The default value is 0." ::= { hwVplsEntry 16 } hwVplsVsiType OBJECT-TYPE SYNTAX INTEGER { operationVsi(1), adminVsi(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the VSI's type." ::= { hwVplsEntry 17 } hwVplsAdminVsiName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the AdminVsi's name this VSI binding to" ::= { hwVplsEntry 18 } hwVplsAcIsolateFlag OBJECT-TYPE SYNTAX HWEnableValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether the AC in the VSI is isolated" ::= { hwVplsEntry 19 } hwVplsDiffServMode OBJECT-TYPE SYNTAX INTEGER { pipe(1), shortpipe(2), uniform(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Different service mode of the interface binding of vsi , default is uniform." ::= { hwVplsEntry 20 } hwVplsDiffServServiceClass OBJECT-TYPE SYNTAX INTEGER { be(1), af1(2), af2(3), af3(4), af4(5), ef(6), cs6(7), cs7(8), invalidClass(255) } MAX-ACCESS read-create STATUS current DESCRIPTION "PHB in the ingress PE, the value must be be,f1,af2,af3,af4,ef,cs6,cs7.The default value is invalidClass(255)." ::= { hwVplsEntry 21 } hwVplsDiffServColor OBJECT-TYPE SYNTAX INTEGER { green(1), yellow(2), red(3), invalidColor(255) } MAX-ACCESS read-create STATUS current DESCRIPTION "Remarked color of packet in the ingress PE, the value must be green,yellow,red.The default value is invalidColor(255)." ::= { hwVplsEntry 22 } hwVplsDiffServDSName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of different service domain" ::= { hwVplsEntry 23 } hwVplsInterfaceWithdraw OBJECT-TYPE SYNTAX HWEnableValue MAX-ACCESS read-create STATUS current DESCRIPTION "Enable VSI send LDP mac-withdraw when VSI receive interface status changes event." ::= { hwVplsEntry 24 } hwVplsUpe2NpeWithdraw OBJECT-TYPE SYNTAX HWEnableValue MAX-ACCESS read-create STATUS current DESCRIPTION "VSI forward message to all the NPE when VSI receive message from UPE." ::= { hwVplsEntry 25 } hwVplsUpe2UpeWithdraw OBJECT-TYPE SYNTAX HWEnableValue MAX-ACCESS read-create STATUS current DESCRIPTION "VSI forward message to all the other UPE when VSI receive message from UPE." ::= { hwVplsEntry 26 } hwVplsNpe2UpeWithdraw OBJECT-TYPE SYNTAX HWEnableValue MAX-ACCESS read-create STATUS current DESCRIPTION "VSI forward message to all the UPE when VSI receive message from NPE." ::= { hwVplsEntry 27 } hwVplsDiscovery OBJECT-TYPE SYNTAX INTEGER { static(1), auto(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the discovery type. If the discovery type is static, the signal must be LDP. If the discovery type is auto, the signal must be BGP." ::= { hwVplsEntry 28 } hwVplsMacWithdrawEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the enable sign of the MAC address withdraw." ::= { hwVplsEntry 29 } hwVplsVsiCir OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the committed information rate, based on VSI." ::= { hwVplsEntry 30 } hwVplsVsiPir OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the peak information rate, based on VSI." ::= { hwVplsEntry 31 } hwVplsVsiQosProfileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the QoS profile's name, based on VSI." ::= { hwVplsEntry 32 } hwVplsAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the VSI's admin status." ::= { hwVplsEntry 33 } hwVplsIgnoreAcState OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the enable sign of the ignorer of AC state." ::= { hwVplsEntry 34 } hwVplsEnableStatistic OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The enable sign of VSI's traffic statistics." ::= { hwVplsEntry 35 } hwVplsResetStatistic OBJECT-TYPE SYNTAX INTEGER { resetStatistic(1), unknownStatus(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Reset traffic statistics of VSI." ::= { hwVplsEntry 36 } hwVplsResetStatisticTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Last time of clean out." ::= { hwVplsEntry 37 } hwVplsAgingTime OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The aging time of the VSI MAC address." ::= { hwVplsEntry 38 } hwVplsUnknowUnicastMacLearning OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object identifies whether the MAC address learning function for the discarded unknown unicast packets is enabled." ::= { hwVplsEntry 39 } hwVplsFlowLabel OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object identifies whether the PW FlowLabel is enabled." ::= { hwVplsEntry 40 } hwVplsServiceName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..100)) MAX-ACCESS read-create STATUS current DESCRIPTION "The service name of the VSI" ::= { hwVplsEntry 41 } hwVplsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus for this Table. Restriction: After the signal type, VSI ID and RD are configured, the configuration can not be modify or delete." ::= { hwVplsEntry 51 } -- -- The VPLS's RT Table -- hwVplsRtTable OBJECT-TYPE SYNTAX SEQUENCE OF HWVplsRtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is the configuration table of VPN Target. Users can create or delete the VPN Target of a VSI." ::= { hwVplsMIBObjects 2 } hwVplsRtEntry OBJECT-TYPE SYNTAX HWVplsRtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provides the information of a RT entry." INDEX { hwVplsVsiName, hwVplsRtType, hwVplsRtName } ::= { hwVplsRtTable 1 } HWVplsRtEntry ::= SEQUENCE { hwVplsRtType INTEGER, hwVplsRtName DisplayString, hwVplsRtRowStatus RowStatus } hwVplsRtType OBJECT-TYPE SYNTAX INTEGER { import(1), export(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the VC's encapsulation type." ::= { hwVplsRtEntry 1 } hwVplsRtName OBJECT-TYPE SYNTAX DisplayString (SIZE (3..21)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the RT." ::= { hwVplsRtEntry 2 } hwVplsRtRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus for this Table. The max number of entries supported is 16. Not support modifying configuration." ::= { hwVplsRtEntry 51 } -- -- The VPLS's AC Table -- hwVplsAcTable OBJECT-TYPE SYNTAX SEQUENCE OF HWVplsAcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is the configuration table of AC. Users can create or delete the AC of a VSI." ::= { hwVplsMIBObjects 3 } hwVplsAcEntry OBJECT-TYPE SYNTAX HWVplsAcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provides the information of a AC entry." INDEX { hwVplsVsiName, hwVplsAcIfIndex } ::= { hwVplsAcTable 1 } HWVplsAcEntry ::= SEQUENCE { hwVplsAcIfIndex InterfaceIndex, hwVplsAcStatus INTEGER, hwVplsAcUpStartTime DisplayString, hwVplsAcUpSumTime Unsigned32, hwVplsAcRowStatus RowStatus } hwVplsAcIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the interface index. There is only one VSI that can be created in one interface." ::= { hwVplsAcEntry 1 } hwVplsAcStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the AC's status." ::= { hwVplsAcEntry 2 } hwVplsAcUpStartTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the time this AC status has been Up(1)." ::= { hwVplsAcEntry 3 } hwVplsAcUpSumTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the cumulate time this AC status has been Up(1)." ::= { hwVplsAcEntry 4 } hwVplsAcRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus for this Table. Not support modifying configuration." ::= { hwVplsAcEntry 51 } -- -- The VPLS's BgpInfo Table -- hwVplsBgpInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HWVplsBgpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is the configuration table of BGP information. Users can create or delete the BgpInfo entry." ::= { hwVplsMIBObjects 4 } hwVplsBgpInfoEntry OBJECT-TYPE SYNTAX HWVplsBgpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provides the information of a BgpInfo entry." INDEX { hwVplsVsiName, hwVplsBgpInfoSiteID } ::= { hwVplsBgpInfoTable 1 } HWVplsBgpInfoEntry ::= SEQUENCE { hwVplsBgpInfoSiteID Unsigned32, hwVplsBgpInfoRange Unsigned32, hwVplsBgpInfoOffset Unsigned32, hwVplsBgpInfoRowStatus RowStatus } hwVplsBgpInfoSiteID OBJECT-TYPE SYNTAX Unsigned32 (0..65534) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the site ID." ::= { hwVplsBgpInfoEntry 1 } hwVplsBgpInfoRange OBJECT-TYPE SYNTAX Unsigned32 (1..65534) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the range." ::= { hwVplsBgpInfoEntry 2 } hwVplsBgpInfoOffset OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-create STATUS current DESCRIPTION "Default original CE offset, default value is 0, calculate the VC in/out label." ::= { hwVplsBgpInfoEntry 3 } hwVplsBgpInfoRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus for this Table. Restriction: Support creating only one entry currently. Before creating, the corresponding VSI's RD and signal type must be designated. The signal type must be BGP. Site can not be modified. Range can increase, but can't decrease." ::= { hwVplsBgpInfoEntry 51 } -- -- The VPLS's PW Table -- hwVplsPwTable OBJECT-TYPE SYNTAX SEQUENCE OF HWVplsPwEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is the configuration table of PW. Users can create or delete the PW entry." ::= { hwVplsMIBObjects 5 } hwVplsPwEntry OBJECT-TYPE SYNTAX HWVplsPwEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provides the information of a PW entry." INDEX { hwVplsVsiName, hwVplsPwID, hwVplsPwRemoteIp } ::= { hwVplsPwTable 1 } HWVplsPwEntry ::= SEQUENCE { hwVplsPwID Unsigned32, hwVplsPwRemoteIp IpAddress, hwVplsPwTnlPolicy DisplayString, hwVplsPwType INTEGER, hwVplsPwIsUpe TruthValue, hwVplsPwInboundLabel Unsigned32, hwVplsPwOutboundLabel Unsigned32, hwVplsPwStatus INTEGER, hwVplsPwVrIfIndex InterfaceIndexOrZero, hwVplsPwVrID Unsigned32, hwVplsPwUpStartTime DisplayString, hwVplsPwUpSumTime Unsigned32, hwVplsPwRowStatus RowStatus } hwVplsPwID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the PW ID." ::= { hwVplsPwEntry 1 } hwVplsPwRemoteIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the IP address of the remote end." ::= { hwVplsPwEntry 2 } hwVplsPwTnlPolicy OBJECT-TYPE SYNTAX DisplayString (SIZE (0..19)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the tunnel policy." ::= { hwVplsPwEntry 3 } hwVplsPwType OBJECT-TYPE SYNTAX INTEGER { normal(1), other(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the PW type." ::= { hwVplsPwEntry 4 } hwVplsPwIsUpe OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the VPLS is UPE or not." ::= { hwVplsPwEntry 5 } hwVplsPwInboundLabel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the inbound label." ::= { hwVplsPwEntry 6 } hwVplsPwOutboundLabel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the outbound label." ::= { hwVplsPwEntry 7 } hwVplsPwStatus OBJECT-TYPE SYNTAX INTEGER { down(1), up(2), plugout(3), backup(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the PW's status." ::= { hwVplsPwEntry 8 } hwVplsPwVrIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the VRRP interface this PW binding to." ::= { hwVplsPwEntry 9 } hwVplsPwVrID OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the VrID this PW binding to." ::= { hwVplsPwEntry 10 } hwVplsPwUpStartTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the time this PW status was Up(1)." ::= { hwVplsPwEntry 11 } hwVplsPwUpSumTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the cumulate time this PW status has been Up(1)." ::= { hwVplsPwEntry 12 } hwVplsPwRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus for this Table. Restriction: Not support creating or modifying entry currently. If the signal type is LDP, we can delete PW by deleting Peer. If the signal type is BGP, we can delete PW by configuring RD. If the signal type is LDP, we need import PW ID value. If the signal type is BGP, we can import 0 as PW ID value." ::= { hwVplsPwEntry 51 } -- -- The VPLS's Statistic Table -- hwVplsStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF HWVplsStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the VPLS's packets Statistic." ::= { hwVplsMIBObjects 6 } hwVplsStatisticsEntry OBJECT-TYPE SYNTAX HWVplsStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provides the information of the VPLS's packets statistic." INDEX { hwVplsVsiName } ::= { hwVplsStatisticsTable 1 } HWVplsStatisticsEntry ::= SEQUENCE { hwVplsOutFrames Counter64, hwVplsInFrames Counter64, hwVplsOutBytes Counter64, hwVplsInBytes Counter64, hwVplsInDiscardFrames Counter64 } hwVplsOutFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames transmitted out of the VSI." ::= { hwVplsStatisticsEntry 1 } hwVplsInFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames received on the VSI." ::= { hwVplsStatisticsEntry 2 } hwVplsOutBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes transmitted out of the VSI." ::= { hwVplsStatisticsEntry 3 } hwVplsInBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes received on the VSI." ::= { hwVplsStatisticsEntry 4 } hwVplsInDiscardFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames received and then discarded on the VSI." ::= { hwVplsStatisticsEntry 5 } -- -- The Leaf Nodes of hwVplsMIBObjects -- hwVplsUpDownNotifEnable OBJECT-TYPE SYNTAX HWEnableValue MAX-ACCESS read-write STATUS obsolete DESCRIPTION "This object indicates the enable sign of VPLS notification. The default value is disable (2)." ::= { hwVplsMIBObjects 7 } hwVplsStateChangeReason OBJECT-TYPE SYNTAX HWL2VpnStateChangeReason MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the reason of VC state change." ::= { hwVplsMIBObjects 8 } -- -- The VPLS LDP's Statistic Table -- hwVplsLdpStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF HWVplsLdpStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the VPLS-PW's Traffic Statistic." ::= { hwVplsMIBObjects 9 } hwVplsLdpStatisticsEntry OBJECT-TYPE SYNTAX HWVplsLdpStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provides the information of the VPLS-PW's Traffic Statistic." INDEX { hwVplsVsiName, hwVplsLdpStatPwID, hwVplsLdpStatRemoteIpAddr } ::= { hwVplsLdpStatisticsTable 1 } HWVplsLdpStatisticsEntry ::= SEQUENCE { hwVplsLdpStatPwID Unsigned32, hwVplsLdpStatRemoteIpAddr IpAddress, hwVplsLdpStatEnable HWEnableValue, hwVplsLdpStatInTrafficRate Counter64, hwVplsLdpStatOutTrafficRate Counter64, hwVplsLdpStatInFrameRate Counter64, hwVplsLdpStatOutFrameRate Counter64, hwVplsLdpStatInBytes Counter64, hwVplsLdpStatOutBytes Counter64, hwVplsLdpStatInFrames Counter64, hwVplsLdpStatOutFrames Counter64, hwVplsLdpStatInUnicastFrames Counter64, hwVplsLdpStatOutUnicastFrames Counter64, hwVplsLdpStatInMulticastFrames Counter64, hwVplsLdpStatOutMulticastFrames Counter64, hwVplsLdpStatInBroadcastFrames Counter64, hwVplsLdpStatOutBroadcastFrames Counter64, hwVplsLdpStatInDiscardFrames Counter64, hwVplsLdpStatOutDiscardFrames Counter64, hwVplsLdpStatInErrorFrames Counter64, hwVplsLdpStatOutErrorFrames Counter64, hwVplsLdpStatInUnknowFrames Counter64, hwVplsLdpStatResetTime DateAndTime, hwVplsLdpStatResetStatistic INTEGER } hwVplsLdpStatPwID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the PW ID." ::= { hwVplsLdpStatisticsEntry 1 } hwVplsLdpStatRemoteIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the IP address of the remote end." ::= { hwVplsLdpStatisticsEntry 2 } hwVplsLdpStatEnable OBJECT-TYPE SYNTAX HWEnableValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the enable sign of LDP VPLS-PW's traffic statistics." ::= { hwVplsLdpStatisticsEntry 3 } hwVplsLdpStatInTrafficRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The traffic rate received on the PW." ::= { hwVplsLdpStatisticsEntry 4 } hwVplsLdpStatOutTrafficRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The traffic rate transmitted out of the PW." ::= { hwVplsLdpStatisticsEntry 5 } hwVplsLdpStatInFrameRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate of Frames received on the PW." ::= { hwVplsLdpStatisticsEntry 6 } hwVplsLdpStatOutFrameRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate of Frames transmitted out of the PW." ::= { hwVplsLdpStatisticsEntry 7 } hwVplsLdpStatInBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes received on the PW." ::= { hwVplsLdpStatisticsEntry 8 } hwVplsLdpStatOutBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes transmitted out of the PW." ::= { hwVplsLdpStatisticsEntry 9 } hwVplsLdpStatInFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames received on the PW." ::= { hwVplsLdpStatisticsEntry 10 } hwVplsLdpStatOutFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames transmitted out of the PW." ::= { hwVplsLdpStatisticsEntry 11 } hwVplsLdpStatInUnicastFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of unicast frames received on the PW." ::= { hwVplsLdpStatisticsEntry 12 } hwVplsLdpStatOutUnicastFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of unicast frames transmitted out of the PW." ::= { hwVplsLdpStatisticsEntry 13 } hwVplsLdpStatInMulticastFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of multicast frames received on the PW." ::= { hwVplsLdpStatisticsEntry 14 } hwVplsLdpStatOutMulticastFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of multicast frames transmitted out of the PW." ::= { hwVplsLdpStatisticsEntry 15 } hwVplsLdpStatInBroadcastFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of broadcast frames received on the PW." ::= { hwVplsLdpStatisticsEntry 16 } hwVplsLdpStatOutBroadcastFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of broadcast frames transmitted out of the PW." ::= { hwVplsLdpStatisticsEntry 17 } hwVplsLdpStatInDiscardFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames received and then discarded on the PW." ::= { hwVplsLdpStatisticsEntry 18 } hwVplsLdpStatOutDiscardFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames transmitted out and then discarded on the PW." ::= { hwVplsLdpStatisticsEntry 19 } hwVplsLdpStatInErrorFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of error frames received on the PW." ::= { hwVplsLdpStatisticsEntry 20 } hwVplsLdpStatOutErrorFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of error frames transmitted out of the PW." ::= { hwVplsLdpStatisticsEntry 21 } hwVplsLdpStatInUnknowFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of unknown frames received on the PW." ::= { hwVplsLdpStatisticsEntry 22 } hwVplsLdpStatResetTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Last time of clean out." ::= { hwVplsLdpStatisticsEntry 23 } hwVplsLdpStatResetStatistic OBJECT-TYPE SYNTAX INTEGER { resetStatistic(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset traffic statistics of VSI's LDP peer." ::= { hwVplsLdpStatisticsEntry 24 } -- -- The VPLS BGP's Statistic Table -- hwVplsBgpStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF HWVplsBgpStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the VPLS-PW's Traffic Statistic." ::= { hwVplsMIBObjects 10 } hwVplsBgpStatisticsEntry OBJECT-TYPE SYNTAX HWVplsBgpStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provides the information of the VPLS-PW's Traffic Statistic." INDEX { hwVplsVsiName, hwVplsBgpStatSiteID, hwVplsBgpStatRemoteIpAddr } ::= { hwVplsBgpStatisticsTable 1 } HWVplsBgpStatisticsEntry ::= SEQUENCE { hwVplsBgpStatSiteID Unsigned32, hwVplsBgpStatRemoteIpAddr IpAddress, hwVplsBgpStatEnable HWEnableValue, hwVplsBgpStatInTrafficRate Counter64, hwVplsBgpStatOutTrafficRate Counter64, hwVplsBgpStatInFrameRate Counter64, hwVplsBgpStatOutFrameRate Counter64, hwVplsBgpStatInBytes Counter64, hwVplsBgpStatOutBytes Counter64, hwVplsBgpStatInFrames Counter64, hwVplsBgpStatOutFrames Counter64, hwVplsBgpStatInUnicastFrames Counter64, hwVplsBgpStatOutUnicastFrames Counter64, hwVplsBgpStatInMulticastFrames Counter64, hwVplsBgpStatOutMulticastFrames Counter64, hwVplsBgpStatInBroadcastFrames Counter64, hwVplsBgpStatOutBroadcastFrames Counter64, hwVplsBgpStatInDiscardFrames Counter64, hwVplsBgpStatOutDiscardFrames Counter64, hwVplsBgpStatInErrorFrames Counter64, hwVplsBgpStatOutErrorFrames Counter64, hwVplsBgpStatInUnknowFrames Counter64, hwVplsBgpStatResetTime DateAndTime } hwVplsBgpStatSiteID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the Site ID." ::= { hwVplsBgpStatisticsEntry 1 } hwVplsBgpStatRemoteIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the IP address of the remote end." ::= { hwVplsBgpStatisticsEntry 2 } hwVplsBgpStatEnable OBJECT-TYPE SYNTAX HWEnableValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the enable sign of BGP VPLS-PW's traffic statistics." ::= { hwVplsBgpStatisticsEntry 3 } hwVplsBgpStatInTrafficRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The traffic rate received on the PW." ::= { hwVplsBgpStatisticsEntry 4 } hwVplsBgpStatOutTrafficRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The traffic rate transmitted out of the PW." ::= { hwVplsBgpStatisticsEntry 5 } hwVplsBgpStatInFrameRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate of Frames received on the PW." ::= { hwVplsBgpStatisticsEntry 6 } hwVplsBgpStatOutFrameRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate of Frames transmitted out of the PW." ::= { hwVplsBgpStatisticsEntry 7 } hwVplsBgpStatInBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes received on the PW." ::= { hwVplsBgpStatisticsEntry 8 } hwVplsBgpStatOutBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes transmitted out of the PW." ::= { hwVplsBgpStatisticsEntry 9 } hwVplsBgpStatInFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames received on the PW." ::= { hwVplsBgpStatisticsEntry 10 } hwVplsBgpStatOutFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames transmitted out of the PW." ::= { hwVplsBgpStatisticsEntry 11 } hwVplsBgpStatInUnicastFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of unicast frames received on the PW." ::= { hwVplsBgpStatisticsEntry 12 } hwVplsBgpStatOutUnicastFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of unicast frames transmitted out of the PW." ::= { hwVplsBgpStatisticsEntry 13 } hwVplsBgpStatInMulticastFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of multicast frames received on the PW." ::= { hwVplsBgpStatisticsEntry 14 } hwVplsBgpStatOutMulticastFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of multicast frames transmitted out of the PW." ::= { hwVplsBgpStatisticsEntry 15 } hwVplsBgpStatInBroadcastFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of broadcast frames received on the PW." ::= { hwVplsBgpStatisticsEntry 16 } hwVplsBgpStatOutBroadcastFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of broadcast frames transmitted out of the PW." ::= { hwVplsBgpStatisticsEntry 17 } hwVplsBgpStatInDiscardFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames received and then discarded on the PW." ::= { hwVplsBgpStatisticsEntry 18 } hwVplsBgpStatOutDiscardFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames transmitted out and then discarded on the PW." ::= { hwVplsBgpStatisticsEntry 19 } hwVplsBgpStatInErrorFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of error frames received on the PW." ::= { hwVplsBgpStatisticsEntry 20 } hwVplsBgpStatOutErrorFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of error frames transmitted out of the PW." ::= { hwVplsBgpStatisticsEntry 21 } hwVplsBgpStatInUnknowFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of unknown frames received on the PW." ::= { hwVplsBgpStatisticsEntry 22 } hwVplsBgpStatResetTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Last time of clean out." ::= { hwVplsBgpStatisticsEntry 23 } -- -- The VPLS's LDP peer Table -- hwVplsLdpPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF HwVplsLdpPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is the configuration table of VPLS's LDP peer. Users can create or delete the LDP peer entry." ::= { hwVplsMIBObjects 11 } hwVplsLdpPeerEntry OBJECT-TYPE SYNTAX HwVplsLdpPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provides the information of a LDP peer entry." INDEX { hwVplsVsiName, hwVplsLdpPeerRouterID, hwVplsLdpPeerPwId } ::= { hwVplsLdpPeerTable 1 } HwVplsLdpPeerEntry ::= SEQUENCE { hwVplsLdpPeerRouterID IpAddress, hwVplsLdpPeerPwId Unsigned32, hwVplsLdpPeerTnlPolicyName DisplayString, hwVplsLdpPeerUpeType INTEGER, hwVplsLdpPeerTransLable Unsigned32, hwVplsLdpPeerRecvLable Unsigned32, hwVplsLdpPeerVrrpIfIndex InterfaceIndexOrZero, hwVplsLdpPeerVirtualRouterId Unsigned32, hwVplsLdpPeerCir Unsigned32, hwVplsLdpPeerPir Unsigned32, hwVplsLdpPeerQosProfileName DisplayString, hwVplsLdpPeerStatus INTEGER, hwVplsLdpPeerPwName DisplayString, hwVplsLdpPeerIgnoreStpLoopCheck EnabledStatus, hwVplsLdpPeerRowStatus RowStatus } hwVplsLdpPeerRouterID OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the IP address of the LDP peer." ::= { hwVplsLdpPeerEntry 1 } hwVplsLdpPeerPwId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the PW ID." ::= { hwVplsLdpPeerEntry 2 } hwVplsLdpPeerTnlPolicyName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..19)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the name of tunnel policy." ::= { hwVplsLdpPeerEntry 3 } hwVplsLdpPeerUpeType OBJECT-TYPE SYNTAX INTEGER { upe(1), staticupe(2), unknown(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the VPLS is UPE , static UPE or not." ::= { hwVplsLdpPeerEntry 4 } hwVplsLdpPeerTransLable OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the transmitted label." ::= { hwVplsLdpPeerEntry 5 } hwVplsLdpPeerRecvLable OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the received label." ::= { hwVplsLdpPeerEntry 6 } hwVplsLdpPeerVrrpIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the VRRP interface this PW binding to." ::= { hwVplsLdpPeerEntry 7 } hwVplsLdpPeerVirtualRouterId OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the virtual router ID this PW binding to." ::= { hwVplsLdpPeerEntry 8 } hwVplsLdpPeerCir OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the committed information rate, based on the LDP peer." ::= { hwVplsLdpPeerEntry 9 } hwVplsLdpPeerPir OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the peak information rate, based on the LDP peer." ::= { hwVplsLdpPeerEntry 10 } hwVplsLdpPeerQosProfileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the QoS profile's name, based on the LDP peer." ::= { hwVplsLdpPeerEntry 11 } hwVplsLdpPeerStatus OBJECT-TYPE SYNTAX INTEGER { down(1), up(2), plugout(3), backup(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the LDP peer's status." ::= { hwVplsLdpPeerEntry 12 } hwVplsLdpPeerPwName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the name of PW." ::= { hwVplsLdpPeerEntry 13 } hwVplsLdpPeerIgnoreStpLoopCheck OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the enable sign of the ignorer of STP loop check." ::= { hwVplsLdpPeerEntry 14 } hwVplsLdpPeerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status for this Table." ::= { hwVplsLdpPeerEntry 51 } -- -- The VPLS LDP's QoS Statistic Table -- hwVplsLdpQosStatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF HWVplsLdpQosStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the VPLS LDP's traffic statistic, based on VSI LDP's peer and QoS." ::= { hwVplsMIBObjects 12 } hwVplsLdpQosStatisticEntry OBJECT-TYPE SYNTAX HWVplsLdpQosStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provides the information of the VPLS LDP's traffic statistic." INDEX { hwVplsVsiName, hwVplsLdpQosStatPwId, hwVplsLdpQosStatRemoteIpAddr, hwVplsLdpQosStatQueueId } ::= { hwVplsLdpQosStatisticTable 1 } HWVplsLdpQosStatisticEntry ::= SEQUENCE { hwVplsLdpQosStatPwId Unsigned32, hwVplsLdpQosStatRemoteIpAddr IpAddress, hwVplsLdpQosStatQueueId INTEGER, hwVplsLdpQosStatTotalPassPacket Counter64, hwVplsLdpQosStatTotalPassByte Counter64, hwVplsLdpQosStatTotalDiscardPacket Counter64, hwVplsLdpQosStatTotalDiscardByte Counter64, hwVplsLdpQosStatPassPacketRate Counter64, hwVplsLdpQosStatPassByteRate Counter64, hwVplsLdpQosStatDiscardPacketRate Counter64, hwVplsLdpQosStatDiscardByteRate Counter64 } hwVplsLdpQosStatPwId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PW ID." ::= { hwVplsLdpQosStatisticEntry 1 } hwVplsLdpQosStatRemoteIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address of the remote end." ::= { hwVplsLdpQosStatisticEntry 2 } hwVplsLdpQosStatQueueId OBJECT-TYPE SYNTAX INTEGER { be(1), af1(2), af2(3), af3(4), af4(5), ef(6), cs6(7), cs7(8) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The queue's ID. The value must be be,af1,af2,af3,af4,ef,cs6,cs7." ::= { hwVplsLdpQosStatisticEntry 3 } hwVplsLdpQosStatTotalPassPacket OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of total passed packets, based on LDP peer and QoS." ::= { hwVplsLdpQosStatisticEntry 4 } hwVplsLdpQosStatTotalPassByte OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of total passed bytes, based on LDP peer and QoS." ::= { hwVplsLdpQosStatisticEntry 5 } hwVplsLdpQosStatTotalDiscardPacket OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of total discarded packets, based on LDP peer and QoS." ::= { hwVplsLdpQosStatisticEntry 6 } hwVplsLdpQosStatTotalDiscardByte OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of total discarded bytes, based on LDP peer and QoS." ::= { hwVplsLdpQosStatisticEntry 7 } hwVplsLdpQosStatPassPacketRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of passed packets for the last 30 seconds, based on LDP peer and QoS. Unit: pps" ::= { hwVplsLdpQosStatisticEntry 8 } hwVplsLdpQosStatPassByteRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of passed bytes for the last 30 seconds, based on LDP peer and QoS. Unit: bps" ::= { hwVplsLdpQosStatisticEntry 9 } hwVplsLdpQosStatDiscardPacketRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of discarded packets for the last 30 seconds, based on LDP peer and QoS. Unit: pps" ::= { hwVplsLdpQosStatisticEntry 10 } hwVplsLdpQosStatDiscardByteRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of discarded bytes for the last 30 seconds, based on LDP peer and QoS. Unit: bps" ::= { hwVplsLdpQosStatisticEntry 11 } -- -- The VPLS's Statistic Table -- hwVplsStatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF HWVplsStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the VPLS's traffic statistic, based on VSI." ::= { hwVplsMIBObjects 13 } hwVplsStatisticEntry OBJECT-TYPE SYNTAX HWVplsStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provides the information of the VPLS's traffic statistic." INDEX { hwVplsVsiName } ::= { hwVplsStatisticTable 1 } HWVplsStatisticEntry ::= SEQUENCE { hwVplsStatEnable EnabledStatus, hwVplsStatResetStatistic INTEGER, hwVplsStatResetTime DateAndTime, hwVplsStatQosPacketRate Counter64, hwVplsStatQosByteRate Counter64, hwVplsStatQosPacket Counter64, hwVplsStatQosByte Counter64 } hwVplsStatEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the enable sign of VSI's traffic statistics." ::= { hwVplsStatisticEntry 1 } hwVplsStatResetStatistic OBJECT-TYPE SYNTAX INTEGER { resetStatistic(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset traffic statistics of VSI." ::= { hwVplsStatisticEntry 2 } hwVplsStatResetTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Last time of clean out." ::= { hwVplsStatisticEntry 3 } hwVplsStatQosPacketRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate of packets received on the VSI." ::= { hwVplsStatisticEntry 4 } hwVplsStatQosByteRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate of bytes received on the VSI." ::= { hwVplsStatisticEntry 5 } hwVplsStatQosPacket OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received on the VSI." ::= { hwVplsStatisticEntry 6 } hwVplsStatQosByte OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes received on the VSI." ::= { hwVplsStatisticEntry 7 } -- -- The VPLS's QoS Statistic Table -- hwVplsQosStatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF HWVplsQosStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the VPLS's traffic statistic, based on VSI and QoS." ::= { hwVplsMIBObjects 14 } hwVplsQosStatisticEntry OBJECT-TYPE SYNTAX HWVplsQosStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provides the information of the VPLS's traffic statistics." INDEX { hwVplsVsiName, hwVplsQosStatQueueId } ::= { hwVplsQosStatisticTable 1 } HWVplsQosStatisticEntry ::= SEQUENCE { hwVplsQosStatQueueId INTEGER, hwVplsQosStatTotalPassPacket Counter64, hwVplsQosStatTotalPassByte Counter64, hwVplsQosStatTotalDiscardPacket Counter64, hwVplsQosStatTotalDiscardByte Counter64, hwVplsQosStatPassPacketRate Counter64, hwVplsQosStatPassByteRate Counter64, hwVplsQosStatDiscardPacketRate Counter64, hwVplsQosStatDiscardByteRate Counter64 } hwVplsQosStatQueueId OBJECT-TYPE SYNTAX INTEGER { be(1), af1(2), af2(3), af3(4), af4(5), ef(6), cs6(7), cs7(8) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The queue's ID. The value must be be,af1,af2,af3,af4,ef,cs6,cs7." ::= { hwVplsQosStatisticEntry 1 } hwVplsQosStatTotalPassPacket OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of total passed packets, based on VSI and QoS." ::= { hwVplsQosStatisticEntry 2 } hwVplsQosStatTotalPassByte OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of total passed bytes, based on VSI and QoS." ::= { hwVplsQosStatisticEntry 3 } hwVplsQosStatTotalDiscardPacket OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of total discarded packets, based on VSI and QoS." ::= { hwVplsQosStatisticEntry 4 } hwVplsQosStatTotalDiscardByte OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of total discarded bytes, based on VSI and QoS." ::= { hwVplsQosStatisticEntry 5 } hwVplsQosStatPassPacketRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of passed packets for the last 30 seconds, based on VSI and QoS. Unit: pps" ::= { hwVplsQosStatisticEntry 6 } hwVplsQosStatPassByteRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of passed bytes for the last 30 seconds, based on VSI and QoS. Unit: bps" ::= { hwVplsQosStatisticEntry 7 } hwVplsQosStatDiscardPacketRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of discarded packets for the last 30 seconds, based on VSI and QoS. Unit: pps" ::= { hwVplsQosStatisticEntry 8 } hwVplsQosStatDiscardByteRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of discarded bytes for the last 30 seconds, based on VSI and QoS. Unit: bps" ::= { hwVplsQosStatisticEntry 9 } -- -- VPLS MIB Trap Definitions -- hwVplsMIBTraps OBJECT IDENTIFIER ::= { hwL2VpnVplsExt 2 } hwVplsVcDown NOTIFICATION-TYPE OBJECTS { hwVplsPwType, hwVplsStateChangeReason, sysUpTime, hwVplsPwTnlPolicy } STATUS current DESCRIPTION "This notification indicates the VC's state changes to down." ::= { hwVplsMIBTraps 1 } hwVplsVcUp NOTIFICATION-TYPE OBJECTS { hwVplsPwType, hwVplsStateChangeReason, sysUpTime, hwVplsPwTnlPolicy } STATUS current DESCRIPTION "This notification indicates the VC's state changes to up." ::= { hwVplsMIBTraps 2 } hwVplsVsiDown NOTIFICATION-TYPE OBJECTS { hwVplsVsiID, hwVplsStateChangeReason, hwVplsStatus, ifName } STATUS current DESCRIPTION "This notification indicates the VSI's state changes to down." ::= { hwVplsMIBTraps 3 } hwVplsVsiUp NOTIFICATION-TYPE OBJECTS { hwVplsVsiID, hwVplsStateChangeReason, hwVplsStatus, ifName } STATUS current DESCRIPTION "This notification indicates the VSI's state changes to up." ::= { hwVplsMIBTraps 4 } hwVplsVcBackup NOTIFICATION-TYPE OBJECTS { hwVplsPwType, hwVplsStateChangeReason, sysUpTime } STATUS current DESCRIPTION "This notification indicates the VC's state changes to backup." ::= { hwVplsMIBTraps 5 } hwVplsVsiDeleted NOTIFICATION-TYPE OBJECTS { hwVplsVsiID } STATUS current DESCRIPTION "This notification indicates the VSI is deleted." ::= { hwVplsMIBTraps 6 } hwVplsVcDeleted NOTIFICATION-TYPE OBJECTS { hwVplsPwType } STATUS current DESCRIPTION "This notification indicates the VC is deleted." ::= { hwVplsMIBTraps 7 } -- Conformance information -- hwVplsMIBConformance OBJECT IDENTIFIER ::= { hwL2VpnVplsExt 3 } hwVplsMIBCompliances OBJECT IDENTIFIER ::= { hwVplsMIBConformance 1 } -- this module hwVplsMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for systems supporting the HUAWEI-VPLS-EXT-MIB." MODULE -- this module MANDATORY-GROUPS { hwVplsGroup, hwVplsRtGroup, hwVplsAcGroup, hwVplsBgpInfoGroup, hwVplsPwGroup, hwVplsStatisticsGroup, hwVplsNotificationControlGroup, hwVplsStateReasonGroup, hwVplsNotificationGroup, hwVplsLdpStatisticsGroup, hwVplsBgpStatisticsGroup, hwVplsLdpPeerGroup, hwVplsLdpQosStatisticGroup, hwVplsStatisticGroup, hwVplsQosStatisticGroup } ::= { hwVplsMIBCompliances 1 } hwVplsMIBGroups OBJECT IDENTIFIER ::= { hwVplsMIBConformance 2 } hwVplsGroup OBJECT-GROUP OBJECTS { hwVplsSignal, hwVplsRD, hwVplsVsiID, hwVplsVcType, hwVplsStatus, hwVplsMtu, hwVplsTunnelPolicy, hwVplsDescription, hwVplsLearnStyle, hwVplsMacLearnEnable, hwVplsMacLimitEnable, hwVplsStatisticsEnable, hwVplsUnknowMulticast, hwVplsUnknowUnicast, hwVplsPreference, hwVplsVsiType, hwVplsAdminVsiName, hwVplsAcIsolateFlag, hwVplsDiffServMode, hwVplsDiffServServiceClass, hwVplsDiffServColor, hwVplsDiffServDSName,hwVplsInterfaceWithdraw,hwVplsUpe2NpeWithdraw,hwVplsUpe2UpeWithdraw, hwVplsNpe2UpeWithdraw, hwVplsDiscovery, hwVplsMacWithdrawEnable, hwVplsVsiCir, hwVplsVsiPir, hwVplsVsiQosProfileName, hwVplsAdminStatus, hwVplsIgnoreAcState, hwVplsEnableStatistic, hwVplsResetStatistic, hwVplsResetStatisticTime,hwVplsAgingTime, hwVplsUnknowUnicastMacLearning, hwVplsFlowLabel, hwVplsServiceName, hwVplsRowStatus } STATUS current DESCRIPTION "The VPLS group." ::= { hwVplsMIBGroups 1 } hwVplsRtGroup OBJECT-GROUP OBJECTS { hwVplsRtRowStatus } STATUS current DESCRIPTION "The VPLS's RT group." ::= { hwVplsMIBGroups 2 } hwVplsAcGroup OBJECT-GROUP OBJECTS { hwVplsAcStatus, hwVplsAcUpStartTime, hwVplsAcUpSumTime, hwVplsAcRowStatus } STATUS current DESCRIPTION "The VPLS's AC group." ::= { hwVplsMIBGroups 3 } hwVplsBgpInfoGroup OBJECT-GROUP OBJECTS { hwVplsBgpInfoRange, hwVplsBgpInfoOffset, hwVplsBgpInfoRowStatus } STATUS current DESCRIPTION "The VPLS's BGP information group." ::= { hwVplsMIBGroups 4 } hwVplsPwGroup OBJECT-GROUP OBJECTS { hwVplsPwTnlPolicy, hwVplsPwType, hwVplsPwIsUpe, hwVplsPwInboundLabel, hwVplsPwOutboundLabel, hwVplsPwStatus, hwVplsPwVrIfIndex, hwVplsPwVrID, hwVplsPwUpStartTime, hwVplsPwUpSumTime, hwVplsPwRowStatus } STATUS current DESCRIPTION "The VPLS's PW group." ::= { hwVplsMIBGroups 5 } hwVplsStatisticsGroup OBJECT-GROUP OBJECTS { hwVplsOutFrames, hwVplsInFrames, hwVplsOutBytes, hwVplsInBytes, hwVplsInDiscardFrames } STATUS current DESCRIPTION "The VPLS's Statistic group." ::= { hwVplsMIBGroups 6 } hwVplsNotificationControlGroup OBJECT-GROUP OBJECTS { hwVplsUpDownNotifEnable } STATUS current DESCRIPTION "The VPLS's Notification Control group." ::= { hwVplsMIBGroups 7 } hwVplsStateReasonGroup OBJECT-GROUP OBJECTS { hwVplsStateChangeReason } STATUS current DESCRIPTION "The VPLS's VC and VSI State Change Reason group." ::= { hwVplsMIBGroups 8 } hwVplsNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { hwVplsVcDown, hwVplsVcUp, hwVplsVsiDown, hwVplsVsiUp, hwVplsVcBackup, hwVplsVsiDeleted, hwVplsVcDeleted } STATUS current DESCRIPTION "The VPLS Notification group." ::= { hwVplsMIBGroups 9 } hwVplsLdpStatisticsGroup OBJECT-GROUP OBJECTS {hwVplsLdpStatEnable,hwVplsLdpStatInTrafficRate, hwVplsLdpStatOutTrafficRate, hwVplsLdpStatInFrameRate, hwVplsLdpStatOutFrameRate, hwVplsLdpStatInBytes, hwVplsLdpStatOutBytes, hwVplsLdpStatInFrames, hwVplsLdpStatOutFrames, hwVplsLdpStatInUnicastFrames, hwVplsLdpStatOutUnicastFrames, hwVplsLdpStatInMulticastFrames, hwVplsLdpStatOutMulticastFrames, hwVplsLdpStatInBroadcastFrames, hwVplsLdpStatOutBroadcastFrames, hwVplsLdpStatInDiscardFrames, hwVplsLdpStatOutDiscardFrames, hwVplsLdpStatInErrorFrames, hwVplsLdpStatOutErrorFrames, hwVplsLdpStatInUnknowFrames, hwVplsLdpStatResetTime, hwVplsLdpStatResetStatistic } STATUS current DESCRIPTION "The VPLS Ldp's Statistic group." ::= { hwVplsMIBGroups 10 } hwVplsBgpStatisticsGroup OBJECT-GROUP OBJECTS {hwVplsBgpStatEnable,hwVplsBgpStatInTrafficRate, hwVplsBgpStatOutTrafficRate, hwVplsBgpStatInFrameRate, hwVplsBgpStatOutFrameRate, hwVplsBgpStatInBytes, hwVplsBgpStatOutBytes, hwVplsBgpStatInFrames, hwVplsBgpStatOutFrames, hwVplsBgpStatInUnicastFrames, hwVplsBgpStatOutUnicastFrames, hwVplsBgpStatInMulticastFrames, hwVplsBgpStatOutMulticastFrames, hwVplsBgpStatInBroadcastFrames, hwVplsBgpStatOutBroadcastFrames, hwVplsBgpStatInDiscardFrames, hwVplsBgpStatOutDiscardFrames, hwVplsBgpStatInErrorFrames, hwVplsBgpStatOutErrorFrames, hwVplsBgpStatInUnknowFrames, hwVplsBgpStatResetTime } STATUS current DESCRIPTION "The VPLS Bgp's Statistic group." ::= { hwVplsMIBGroups 11 } hwVplsLdpPeerGroup OBJECT-GROUP OBJECTS { hwVplsLdpPeerTnlPolicyName, hwVplsLdpPeerUpeType, hwVplsLdpPeerTransLable, hwVplsLdpPeerRecvLable, hwVplsLdpPeerVrrpIfIndex, hwVplsLdpPeerVirtualRouterId, hwVplsLdpPeerCir, hwVplsLdpPeerPir, hwVplsLdpPeerQosProfileName, hwVplsLdpPeerStatus, hwVplsLdpPeerPwName, hwVplsLdpPeerIgnoreStpLoopCheck, hwVplsLdpPeerRowStatus } STATUS current DESCRIPTION "The VPLS LDP's peer group." ::= { hwVplsMIBGroups 12 } hwVplsLdpQosStatisticGroup OBJECT-GROUP OBJECTS { hwVplsLdpQosStatTotalPassPacket, hwVplsLdpQosStatTotalPassByte, hwVplsLdpQosStatTotalDiscardPacket, hwVplsLdpQosStatTotalDiscardByte, hwVplsLdpQosStatPassPacketRate, hwVplsLdpQosStatPassByteRate, hwVplsLdpQosStatDiscardPacketRate, hwVplsLdpQosStatDiscardByteRate } STATUS current DESCRIPTION "The VPLS's QoS statistic group." ::= { hwVplsMIBGroups 13 } hwVplsStatisticGroup OBJECT-GROUP OBJECTS { hwVplsStatEnable, hwVplsStatResetStatistic, hwVplsStatResetTime, hwVplsStatQosPacketRate, hwVplsStatQosByteRate, hwVplsStatQosPacket, hwVplsStatQosByte } STATUS current DESCRIPTION "The VPLS's QoS statistic group." ::= { hwVplsMIBGroups 14 } hwVplsQosStatisticGroup OBJECT-GROUP OBJECTS { hwVplsQosStatTotalPassPacket, hwVplsQosStatTotalPassByte, hwVplsQosStatTotalDiscardPacket, hwVplsQosStatTotalDiscardByte, hwVplsQosStatPassPacketRate, hwVplsQosStatPassByteRate, hwVplsQosStatDiscardPacketRate, hwVplsQosStatDiscardByteRate } STATUS current DESCRIPTION "The VPLS's QoS statistic group." ::= { hwVplsMIBGroups 15 } END -- -- HUAWEI-VPLS-EXT-MIB.mib --