-- -- HUAWEI-ENTITY-EXTENT-MIB.mib -- MIB generated by Visual MIB Builder Version 4.0 Build 341 -- Friday, July 15, 2011 at 16:41:48 -- HUAWEI-ENTITY-EXTENT-MIB DEFINITIONS ::= BEGIN IMPORTS entPhysicalIndex, entPhysicalVendorType, PhysicalClass, PhysicalIndex FROM ENTITY-MIB hwDatacomm FROM HUAWEI-MIB InterfaceIndex FROM IF-MIB EnabledStatus FROM P-BRIDGE-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF Integer32, Unsigned32, Counter64, BITS, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI DateAndTime, DisplayString, RowStatus, TEXTUAL-CONVENTION, AutonomousType FROM SNMPv2-TC; -- 1.3.6.1.4.1.2011.5.25.31 hwEntityExtentMIB MODULE-IDENTITY LAST-UPDATED "201107151641Z" ORGANIZATION "Huawei Technologies co.,Ltd." CONTACT-INFO " R&D BeiJing, Huawei Technologies co.,Ltd. Huawei Bld.,NO.3 Xinxi Rd., Shang-Di Information Industry Base, Hai-Dian District Beijing P.R. China Zip:100085 Http://www.huawei.com E-mail:support@huawei.com " DESCRIPTION "The private mib file includes the general extent information of the device." ::= { hwDatacomm 31 } -- -- Textual conventions -- HwAdminState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " Represents the various possible administrative states. A value of locked means the resource is administratively prohibited from use. A value of shuttingDown means that usage is administratively limited to current instances of use. A value of unlocked means the resource is not administratively prohibited from use. A value of up means that the port is not administratively shut down and a value of down is the oppsite. A value of loopback here means the port is working in the loopback local mode. When a port is both shut down and looped back, we user the vale of down." REFERENCE "ITU Recommendation X.731, 'Information Technology - Open Systems Interconnection - System Management: State Management Function', 1992" SYNTAX INTEGER { notSupported(1), locked(2), shuttingDown(3), unlocked(4), up(11), down(12), loopback(13) } HwOperState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " Represents the possible values of operational states. A value of disabled means the resource is totally inoperable. A value of enabled means the resource is partially or fully operable. The values up(11),down(12) and connect(13) is used only for NE5000E BTB or it's extended system. A value of protocolUp means the port is available in the protocol lay or has already prepared for transmitting or receiving data. A value of linkUp means the port is only available in the physical lay. A value of linkDown means the port is not available physically." REFERENCE "ITU Recommendation X.731, 'Information Technology - Open Systems Interconnection - System Management: State Management Function', 1992" SYNTAX INTEGER { notSupported(1), disabled(2), enabled(3), offline(4), up(11), down(12), connect(13), protocolUp(15), linkUp(16), linkDown(17) } HwStandbyStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " Represents the possible values of standby status. A value of hotStandby means the resource is not providing service, but is will be immediately able to take over the role of the resource to be backed-up, without the need for initialization activity, and will contain the same information as the resource to be backed up. A value of coldStandy means that the resource is to back-up another resource, but will not be immediately able to take over the role of a resource to be backed up, and will require some initialization activity. A value of providingService means the resource is providing service." REFERENCE "ITU Recommendation X.731, 'Information Technology - Open Systems Interconnection - System Management: State Management Function', 1992" SYNTAX INTEGER { notSupported(1), hotStandby(2), coldStandby(3), providingService(4) } HwAlarmStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the possible values of alarm status. When no bits of this attribute are set, then none of the status conditions described below are present. When the value of under repair is set, the resource is currently being repaired. When the value of critical is set, one or more critical alarms are active against the resource. When the value of major is set, one or more major alarms are active against the resource. When the value of minor is set, one or more minor alarms are active against the resource. When the value of warning is set, one or more warning alarms are active against the resource. When the value of indeterminate is set, one or more alarms of indeterminate severity are active against the resource. When the value of alarm outstanding is set, one or more alarms is active against the resource. The fault may or may not be disabling. " REFERENCE "ITU Recommendation X.731, 'Information Technology - Open Systems Interconnection - System Management: State Management Function', 1992" SYNTAX BITS { notSupported(0), underRepair(1), critical(2), major(3), minor(4), alarmOutstanding(5), warning(6), indeterminate(7) } HWLevelState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The normal state of input line ." SYNTAX INTEGER { lowLevel(1), highLevel(2) } -- -- Node definitions -- -- 1.3.6.1.4.1.2011.5.25.31.1 hwEntityExtObjects OBJECT IDENTIFIER ::= { hwEntityExtentMIB 1 } -- 1.3.6.1.4.1.2011.5.25.31.1.1 hwEntityState OBJECT IDENTIFIER ::= { hwEntityExtObjects 1 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1 hwEntityStateTable OBJECT-TYPE SYNTAX SEQUENCE OF HwEntityStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row per physical entity, There is always at least one row for an 'overall' physical entity. The information in each row may be not include all the object in this table, because of the entity need not some of the information here. " ::= { hwEntityState 1 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1 hwEntityStateEntry OBJECT-TYPE SYNTAX HwEntityStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular physical entity. Each entry provides objects (entPhysicalDescr, entPhysicalVendorType, and entPhysicalClass) to help an NMS identify and characterize the entry, and objects (entPhysicalContainedIn and entPhysicalParentRelPos) to help an NMS relate the particular entry to other entries in this table." INDEX { entPhysicalIndex } ::= { hwEntityStateTable 1 } HwEntityStateEntry ::= SEQUENCE { hwEntityAdminStatus HwAdminState, hwEntityOperStatus HwOperState, hwEntityStandbyStatus HwStandbyStatus, hwEntityAlarmLight HwAlarmStatus, hwEntityCpuUsage Integer32, hwEntityCpuUsageThreshold Integer32, hwEntityMemUsage Integer32, hwEntityMemUsageThreshold Integer32, hwEntityMemSize Integer32, hwEntityUpTime Integer32, hwEntityTemperature Integer32, hwEntityTemperatureThreshold Integer32, hwEntityVoltage Integer32, hwEntityVoltageLowThreshold Integer32, hwEntityVoltageHighThreshold Integer32, hwEntityTemperatureLowThreshold Integer32, hwEntityOpticalPower Integer32, hwEntityCurrent Integer32, hwEntityMemSizeMega Integer32, hwEntityPortType INTEGER, hwEntityDuplex INTEGER, hwEntityOpticalPowerRx Integer32, hwEntityCpuUsageLowThreshold Integer32, hwEntityBoardPower Integer32, hwEntityCpuFrequency Integer32, hwEntitySupportFlexCard INTEGER, hwEntityBoardClass INTEGER, hwNseOpmStatus Integer32, hwEntityCpuMaxUsage Integer32, hwEntityCPUType SnmpAdminString, hwEntityMemoryType SnmpAdminString, hwEntityFlashSize Integer32, hwEntityIfUpTimes Integer32, hwEntityIfDownTimes Integer32, hwEntityCPUAvgUsage Integer32, hwEntityMemoryAvgUsage Integer32 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.1 hwEntityAdminStatus OBJECT-TYPE SYNTAX HwAdminState MAX-ACCESS read-write STATUS current DESCRIPTION " The administrative state for this object, and it is possible to set the state when needed. " ::= { hwEntityStateEntry 1 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.2 hwEntityOperStatus OBJECT-TYPE SYNTAX HwOperState MAX-ACCESS read-only STATUS current DESCRIPTION " The operational state for this object. " ::= { hwEntityStateEntry 2 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.3 hwEntityStandbyStatus OBJECT-TYPE SYNTAX HwStandbyStatus MAX-ACCESS read-only STATUS current DESCRIPTION " Some entity in a device can support standby mode, This object is used for monitoring standby status. " ::= { hwEntityStateEntry 3 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.4 hwEntityAlarmLight OBJECT-TYPE SYNTAX HwAlarmStatus MAX-ACCESS read-only STATUS current DESCRIPTION " The alarm status for this entity. It does not include the severity of alarms raised on child components. On the condition, there are a alarm light on the entity, the object should have the same status with it." ::= { hwEntityStateEntry 4 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.5 hwEntityCpuUsage OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION " The CPU usage for this entity. Generally, the CPU usage will calculate the overall CPU usage on the entity, and it is not sensible with the number of CPU on the entity. " ::= { hwEntityStateEntry 5 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.6 hwEntityCpuUsageThreshold OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION " The threshold for the CPU usage. When the CPU usage exceed the threshold, a notification will be sent. " ::= { hwEntityStateEntry 6 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.7 hwEntityMemUsage OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION " The memory usage for the entity. This object point out how many percent of memory has been used. " ::= { hwEntityStateEntry 7 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.8 hwEntityMemUsageThreshold OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION " The threshold for the Memory usage, When the memory usage exceed the threshold, a notification will be sent. " ::= { hwEntityStateEntry 8 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.9 hwEntityMemSize OBJECT-TYPE SYNTAX Integer32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION " The size of memory for the entity. " ::= { hwEntityStateEntry 9 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.10 hwEntityUpTime OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION " The up time for the entity. The mean of up time is when the entity is up, and the value of the object will add one per seconds while the entity running. " ::= { hwEntityStateEntry 10 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.11 hwEntityTemperature OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The temperature for the entity. " ::= { hwEntityStateEntry 11 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.12 hwEntityTemperatureThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " The threshold for the temperature. When the temperature exceed the threshold, a notification will be sent. " ::= { hwEntityStateEntry 12 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.13 hwEntityVoltage OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The voltage for the entity. " ::= { hwEntityStateEntry 13 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.14 hwEntityVoltageLowThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " The low-threshold for the voltage. Generally, we have two threshold for the voltage, one is low-threshold, and the other is high-threshold. the normal status of voltage should be greater than the low-threshold, and lower than the high-threshold. When the voltage low than the low-threshold, a notification will be sent. " ::= { hwEntityStateEntry 14 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.15 hwEntityVoltageHighThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " The high-threshold for the voltage. Generally, we have two threshold for the voltage, one is low-threshold, and the other is high-threshold. the normal status of voltage should be greater than the low-threshold, and lower than the high-threshold. When the voltage greater than the high-threshold, a notification will be sent. " ::= { hwEntityStateEntry 15 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.16 hwEntityTemperatureLowThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The low-threshold of temperature. If the device temperature is lower than the threshold, an alarm is raised. " ::= { hwEntityStateEntry 16 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.17 hwEntityOpticalPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The optical power of the optical module. Unit: uW" ::= { hwEntityStateEntry 17 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.18 hwEntityCurrent OBJECT-TYPE SYNTAX Integer32 UNITS "A" MAX-ACCESS read-only STATUS current DESCRIPTION " The current for the entity. " ::= { hwEntityStateEntry 18 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.19 hwEntityMemSizeMega OBJECT-TYPE SYNTAX Integer32 UNITS "M bytes" MAX-ACCESS read-only STATUS current DESCRIPTION " The size of SDRAM(Synchronous Dynamic Random Access Memory) memory for the entity. Unit: M bytes" ::= { hwEntityStateEntry 19 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.20 hwEntityPortType OBJECT-TYPE SYNTAX INTEGER { notSupported(1), copper(2), fiber100(3), fiber1000(4), fiber10000(5), opticalnotExist(6), optical(7) } MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the type of the Ethernet interface: an optical interface or an electrical interface. " ::= { hwEntityStateEntry 20 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.21 hwEntityDuplex OBJECT-TYPE SYNTAX INTEGER { notSupported(1), full(2), half(3) } MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the duplex mode of the Ethernet interface. An electrical Ethernet interface can work in half-duplex mode or full-duplex mode. An optical Ethernet can work only in full-duplex mode. " ::= { hwEntityStateEntry 21 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.22 hwEntityOpticalPowerRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The optical power(Rx) of the optical module. Unit: uW" ::= { hwEntityStateEntry 22 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.23 hwEntityCpuUsageLowThreshold OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION " The threshold for the CPU usage. When the CPU usage exceed the threshold, a notification will be sent. " ::= { hwEntityStateEntry 23 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.24 hwEntityBoardPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The board power for the entity. Unit: W" ::= { hwEntityStateEntry 24 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.25 hwEntityCpuFrequency OBJECT-TYPE SYNTAX Integer32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION " The frequency of the entity. Unit: Hz" ::= { hwEntityStateEntry 25 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.26 hwEntitySupportFlexCard OBJECT-TYPE SYNTAX INTEGER { notSupported(1), flexible(2), unflexible(3), dummy(4) } MAX-ACCESS read-only STATUS current DESCRIPTION " It describes whether the whole board supports flexible cards. When the board doesn't support flexible cards, the cards may be dummy ones whose ports will not be seen by the customer." ::= { hwEntityStateEntry 26 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.27 hwEntityBoardClass OBJECT-TYPE SYNTAX INTEGER { notSupported(1), mpu(2), lpu(3), sfu(4), icu(5), ecu(6), fan(7), power(8), lcd(9) } MAX-ACCESS read-only STATUS current DESCRIPTION " It describes the board type of the whole board." ::= { hwEntityStateEntry 27 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.28 hwNseOpmStatus OBJECT-TYPE SYNTAX Integer32 (0..2) MAX-ACCESS read-only STATUS current DESCRIPTION "OPM status. 0: pass, 1: bypass, 2: invalid" ::= { hwEntityStateEntry 28 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.29 hwEntityCpuMaxUsage OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The Max CPU usage for this entity. Generally, the Max CPU usage will calculate the overall CPU usage on the entity, and it is not sensible with the number of CPU on the entity. " ::= { hwEntityStateEntry 29 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.30 hwEntityCPUType OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "CPU type." ::= { hwEntityStateEntry 30 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.31 hwEntityMemoryType OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Memory type." ::= { hwEntityStateEntry 31 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.32 hwEntityFlashSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Flash size, in KB." ::= { hwEntityStateEntry 32 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.33 hwEntityIfUpTimes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Times that the interface goes Up." ::= { hwEntityStateEntry 33 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.34 hwEntityIfDownTimes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Times that the interface goes Down." ::= { hwEntityStateEntry 34 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.35 hwEntityCPUAvgUsage OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average CPU usage within a specified statistical interval." ::= { hwEntityStateEntry 35 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.36 hwEntityMemoryAvgUsage OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Average memory usage within a specified statistical interval." ::= { hwEntityStateEntry 36 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.2 hwRUModuleInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwRUModuleInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row per replaceable unit physical entity. The row with the field 'entPhysicalIsFRU' sets to 'true' in table 'entPhysicalTable' will be mapped to one row in this table." ::= { hwEntityState 2 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.2.1 hwRUModuleInfoEntry OBJECT-TYPE SYNTAX HwRUModuleInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a replaceable unit physical entity. Each entry provides objects of a replaceable unit to help an NMS identify and characterize the entry in this table. " INDEX { entPhysicalIndex } ::= { hwRUModuleInfoTable 1 } HwRUModuleInfoEntry ::= SEQUENCE { hwEntityBomId SnmpAdminString, hwEntityBomEnDesc SnmpAdminString, hwEntityBomLocalDesc SnmpAdminString, hwEntityManufacturedDate DateAndTime, hwEntityManufactureCode Integer32, hwEntityCLEICode SnmpAdminString, hwEntityUpdateLog SnmpAdminString, hwEntityArchivesInfoVersion SnmpAdminString, hwEntityOpenBomId SnmpAdminString, hwEntityIssueNum SnmpAdminString, hwEntityBoardType SnmpAdminString } -- 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.1 hwEntityBomId OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The identity of the Bill of Material about this replaceable unit which coded by vendor. This node is mapping to 'ITEM' in the information file. " ::= { hwRUModuleInfoEntry 1 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.2 hwEntityBomEnDesc OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The English description of the Bill of Material about this replaceable unit. " ::= { hwRUModuleInfoEntry 2 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.3 hwEntityBomLocalDesc OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The local description of the Bill of Material about this replaceable unit. " ::= { hwRUModuleInfoEntry 3 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.4 hwEntityManufacturedDate OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date when this physical entity is Manufactured. " ::= { hwRUModuleInfoEntry 4 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.5 hwEntityManufactureCode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The code of the place where this physical entity is Manufactured. " ::= { hwRUModuleInfoEntry 5 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.6 hwEntityCLEICode OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The string code of CLEI which was granted by America. " ::= { hwRUModuleInfoEntry 6 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.7 hwEntityUpdateLog OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The maintenance log of this replaceable unit. " ::= { hwRUModuleInfoEntry 7 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.8 hwEntityArchivesInfoVersion OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The Version of Archives Information. " ::= { hwRUModuleInfoEntry 8 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.9 hwEntityOpenBomId OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The BomId for distribution. It is different from hwEntityBomId." ::= { hwRUModuleInfoEntry 9 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.10 hwEntityIssueNum OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The issue number for hardware change." ::= { hwRUModuleInfoEntry 10 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.11 hwEntityBoardType OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The type code for entity." ::= { hwRUModuleInfoEntry 11 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.3 hwOpticalModuleInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOpticalModuleInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of optical module properties." ::= { hwEntityState 3 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1 hwOpticalModuleInfoEntry OBJECT-TYPE SYNTAX HwOpticalModuleInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table of optical module properties for each optical module." INDEX { entPhysicalIndex } ::= { hwOpticalModuleInfoTable 1 } HwOpticalModuleInfoEntry ::= SEQUENCE { hwEntityOpticalMode INTEGER, hwEntityOpticalWaveLength Integer32, hwEntityOpticalTransDistance Integer32, hwEntityOpticalVendorSn SnmpAdminString, hwEntityOpticalTemperature Integer32, hwEntityOpticalVoltage Integer32, hwEntityOpticalBiasCurrent Integer32, hwEntityOpticalRxPower Integer32, hwEntityOpticalTxPower Integer32, hwEntityOpticalType INTEGER, hwEntityOpticalTransBW Integer32, hwEntityOpticalFiberType INTEGER, hwEntityOpticalRxLowThreshold Integer32, hwEntityOpticalRxHighThreshold Integer32, hwEntityOpticalTxLowThreshold Integer32, hwEntityOpticalTxHighThreshold Integer32, hwEntityOpticalPlug INTEGER, hwEntityOpticalDirectionType INTEGER, hwEntityOpticalUserEeprom DisplayString, hwEntityOpticalRxLowWarnThreshold Integer32, hwEntityOpticalRxHighWarnThreshold Integer32, hwEntityOpticalTxLowWarnThreshold Integer32, hwEntityOpticalTxHighWarnThreshold Integer32 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.1 hwEntityOpticalMode OBJECT-TYPE SYNTAX INTEGER { notSupported(1), singleMode(2), multiMode5(3), multiMode6(4), noValue(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The mode of the optical module." ::= { hwOpticalModuleInfoEntry 1 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.2 hwEntityOpticalWaveLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The wave length of the optical module. Unit: nm." ::= { hwOpticalModuleInfoEntry 2 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.3 hwEntityOpticalTransDistance OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The max transmission distance of the optical module. Unit: m." ::= { hwOpticalModuleInfoEntry 3 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.4 hwEntityOpticalVendorSn OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor serial number (vendor SN) of the optical module. Length: 16 bytes." ::= { hwOpticalModuleInfoEntry 4 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.5 hwEntityOpticalTemperature OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current temperature of the optical module. Unit: C" ::= { hwOpticalModuleInfoEntry 5 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.6 hwEntityOpticalVoltage OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current voltage of the optical module. Unit: mV." ::= { hwOpticalModuleInfoEntry 6 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.7 hwEntityOpticalBiasCurrent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The bias current of the optical module. Unit: mA." ::= { hwOpticalModuleInfoEntry 7 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.8 hwEntityOpticalRxPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The receive power of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times " ::= { hwOpticalModuleInfoEntry 8 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.9 hwEntityOpticalTxPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The transmit power of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times " ::= { hwOpticalModuleInfoEntry 9 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.10 hwEntityOpticalType OBJECT-TYPE SYNTAX INTEGER { unknown(0), sc(1), gbic(2), sfp(3), esfp(4), copper(5), xfp(6), xenpak(7), transponder(8), cfp(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the optical module." ::= { hwOpticalModuleInfoEntry 10 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.11 hwEntityOpticalTransBW OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Transceiver max BW of the optical module.Unit:M" ::= { hwOpticalModuleInfoEntry 11 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.12 hwEntityOpticalFiberType OBJECT-TYPE SYNTAX INTEGER { unknown(0), sc(1), style-1-copper-connector(2), style-2-copper-connector(3), bnc-tnc(4), coaxial-headers(5), fiberJack(6), lc(7), mt-rj(8), mu(9), sg(10), optical-pigtail(11), hssdcII(20), copper-pigtail(21) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Fiber type of the optical module." ::= { hwOpticalModuleInfoEntry 12 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.13 hwEntityOpticalRxLowThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The receive power low threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times " ::= { hwOpticalModuleInfoEntry 13 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.14 hwEntityOpticalRxHighThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The receive power high threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times " ::= { hwOpticalModuleInfoEntry 14 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.15 hwEntityOpticalTxLowThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The transmit power low threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times " ::= { hwOpticalModuleInfoEntry 15 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.16 hwEntityOpticalTxHighThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The transmit power high threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times " ::= { hwOpticalModuleInfoEntry 16 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.17 hwEntityOpticalPlug OBJECT-TYPE SYNTAX INTEGER { notSupported(0), true(1), false(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The optical module is plug-supported or not." ::= { hwOpticalModuleInfoEntry 17 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.18 hwEntityOpticalDirectionType OBJECT-TYPE SYNTAX INTEGER { notSupported(1), twoFiberBidirection(2), oneFiberBidirection(3), twoFiberTwoPortBidirection(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The direction type of the optical module." ::= { hwOpticalModuleInfoEntry 18 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.19 hwEntityOpticalUserEeprom OBJECT-TYPE SYNTAX DisplayString (SIZE (0..120)) MAX-ACCESS read-only STATUS current DESCRIPTION "The user writable EEPROM of the optical module." ::= { hwOpticalModuleInfoEntry 19 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.20 hwEntityOpticalRxLowWarnThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The receive power low warning threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times " ::= { hwOpticalModuleInfoEntry 20 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.21 hwEntityOpticalRxHighWarnThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The receive power high warning threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times " ::= { hwOpticalModuleInfoEntry 21 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.22 hwEntityOpticalTxLowWarnThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The transmit power low warning threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times " ::= { hwOpticalModuleInfoEntry 22 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.23 hwEntityOpticalTxHighWarnThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The transmit power high warning threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times " ::= { hwOpticalModuleInfoEntry 23 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.4 hwMonitorInputTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMonitorInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row per replaceable unit physical entity. This table is used to set the status of monitor port." ::= { hwEntityState 4 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.4.1 hwMonitorInputEntry OBJECT-TYPE SYNTAX HwMonitorInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a replaceable unit physical entity." INDEX { hwMonitorInputIndex } ::= { hwMonitorInputTable 1 } HwMonitorInputEntry ::= SEQUENCE { hwMonitorInputIndex Integer32, hwMonitorInputName DisplayString, hwMonitorInputState HWLevelState, hwMonitorInputStateEnable EnabledStatus, hwMonitorInputRowStatus RowStatus } -- 1.3.6.1.4.1.2011.5.25.31.1.1.4.1.1 hwMonitorInputIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Monitor port index. This is a number of input line,ranging from 1 to 4. " ::= { hwMonitorInputEntry 1 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.4.1.2 hwMonitorInputName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Monitor line name. " ::= { hwMonitorInputEntry 2 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.4.1.3 hwMonitorInputState OBJECT-TYPE SYNTAX HWLevelState MAX-ACCESS read-create STATUS current DESCRIPTION "Monitor line status. The value is high or low. " ::= { hwMonitorInputEntry 3 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.4.1.4 hwMonitorInputStateEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Enable monitor line. " ::= { hwMonitorInputEntry 4 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.4.1.5 hwMonitorInputRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Status of monitor input row. " ::= { hwMonitorInputEntry 5 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.5 hwMonitorOutputTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMonitorOutputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row per replaceable unit physical entity. This table is used to create a output view." ::= { hwEntityState 5 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.5.1 hwMonitorOutputEntry OBJECT-TYPE SYNTAX HwMonitorOutputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a replaceable unit physical entity." INDEX { hwMonitorOutputIndex, hwMonitorOutputRuleIndex } ::= { hwMonitorOutputTable 1 } HwMonitorOutputEntry ::= SEQUENCE { hwMonitorOutputIndex Integer32, hwMonitorOutputRuleIndex Integer32, hwMonitorOutputMask DisplayString, hwMonitorOutputKey DisplayString, hwMonitorOutputRowStatus RowStatus } -- 1.3.6.1.4.1.2011.5.25.31.1.1.5.1.1 hwMonitorOutputIndex OBJECT-TYPE SYNTAX Integer32 (1..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Monitor output view index. Through this index ,you can turn into the output view. " ::= { hwMonitorOutputEntry 1 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.5.1.2 hwMonitorOutputRuleIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Monitor output rule index. This is used to set the rules about all of the input line. " ::= { hwMonitorOutputEntry 2 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.5.1.3 hwMonitorOutputMask OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Monitor output mask . This is used to matching the level of monitor input line. " ::= { hwMonitorOutputEntry 3 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.5.1.4 hwMonitorOutputKey OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Normal level value of this output line. " ::= { hwMonitorOutputEntry 4 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.5.1.5 hwMonitorOutputRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Status of monitor input row " ::= { hwMonitorOutputEntry 5 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.6 hwEntPowerUsedInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwEntPowerUsedInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of information that displays the power use of entity ." ::= { hwEntityState 6 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.6.1 hwEntPowerUsedInfoEntry OBJECT-TYPE SYNTAX HwEntPowerUsedInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of the table of information that displays the power use of entity." INDEX { entPhysicalIndex } ::= { hwEntPowerUsedInfoTable 1 } HwEntPowerUsedInfoEntry ::= SEQUENCE { hwEntPowerUsedInfoBoardName OCTET STRING, hwEntPowerUsedInfoBoardType OCTET STRING, hwEntPowerUsedInfoBoardSlot Integer32, hwEntPowerUsedInfoPower Integer32 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.6.1.1 hwEntPowerUsedInfoBoardName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Board name." ::= { hwEntPowerUsedInfoEntry 1 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.6.1.2 hwEntPowerUsedInfoBoardType OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Board type." ::= { hwEntPowerUsedInfoEntry 2 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.6.1.3 hwEntPowerUsedInfoBoardSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Board's slot number." ::= { hwEntPowerUsedInfoEntry 3 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.6.1.4 hwEntPowerUsedInfoPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Used power of board." ::= { hwEntPowerUsedInfoEntry 4 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.7 hwVirtualCableTestTable OBJECT-TYPE SYNTAX SEQUENCE OF HwVirtualCableTestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row per replaceable unit physical entity. This table is used to display VCT result." ::= { hwEntityState 7 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.7.1 hwVirtualCableTestEntry OBJECT-TYPE SYNTAX HwVirtualCableTestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a replaceable unit physical entity." INDEX { hwVirtualCableTestIfIndex } ::= { hwVirtualCableTestTable 1 } HwVirtualCableTestEntry ::= SEQUENCE { hwVirtualCableTestIfIndex InterfaceIndex, hwVirtualCableTestPairStatus INTEGER, hwVirtualCableTestPairLength Integer32, hwVirtualCableTestOperation INTEGER, hwVirtualCableTestLastTime Integer32, hwVirtualCableTestPairAStatus INTEGER, hwVirtualCableTestPairBStatus INTEGER, hwVirtualCableTestPairCStatus INTEGER, hwVirtualCableTestPairDStatus INTEGER, hwVirtualCableTestPairALength Integer32, hwVirtualCableTestPairBLength Integer32, hwVirtualCableTestPairCLength Integer32, hwVirtualCableTestPairDLength Integer32 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.1 hwVirtualCableTestIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "IfIndex of port that you want to test cable." ::= { hwVirtualCableTestEntry 1 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.2 hwVirtualCableTestPairStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), abnormalOpen(2), abnormalShort(3), abnormalOpenShort(4), abnormalCrossTalk(5), unknown(6), notSupport(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Pair status. This indicate the status of cable. " ::= { hwVirtualCableTestEntry 2 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.3 hwVirtualCableTestPairLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pair Length. This indicate the length of cable. " ::= { hwVirtualCableTestEntry 3 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.4 hwVirtualCableTestOperation OBJECT-TYPE SYNTAX INTEGER { startTest(1), resetTestValue(2), readyStartTest(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "VirtualCableTestOperation. This Operation of VirtualCableTest." ::= { hwVirtualCableTestEntry 4 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.5 hwVirtualCableTestLastTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The last test time for the entity. The mean of last time is when the entity is tested, and the value of the object will add one per seconds until now." ::= { hwVirtualCableTestEntry 5 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.6 hwVirtualCableTestPairAStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), abnormalOpen(2), abnormalShort(3), abnormalOpenShort(4), abnormalCrossTalk(5), unknown(6), notSupport(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Pair A status. This indicate the status of cable. " ::= { hwVirtualCableTestEntry 6 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.7 hwVirtualCableTestPairBStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), abnormalOpen(2), abnormalShort(3), abnormalOpenShort(4), abnormalCrossTalk(5), unknown(6), notSupport(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Pair B status. This indicate the status of cable. " ::= { hwVirtualCableTestEntry 7 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.8 hwVirtualCableTestPairCStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), abnormalOpen(2), abnormalShort(3), abnormalOpenShort(4), abnormalCrossTalk(5), unknown(6), notSupport(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Pair C status. This indicate the status of cable. " ::= { hwVirtualCableTestEntry 8 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.9 hwVirtualCableTestPairDStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), abnormalOpen(2), abnormalShort(3), abnormalOpenShort(4), abnormalCrossTalk(5), unknown(6), notSupport(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Pair D status. This indicate the status of cable. " ::= { hwVirtualCableTestEntry 9 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.10 hwVirtualCableTestPairALength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pair A Length. This indicate the length of cable. " ::= { hwVirtualCableTestEntry 10 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.11 hwVirtualCableTestPairBLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pair B Length. This indicate the length of cable. " ::= { hwVirtualCableTestEntry 11 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.12 hwVirtualCableTestPairCLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pair C Length. This indicate the length of cable. " ::= { hwVirtualCableTestEntry 12 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.13 hwVirtualCableTestPairDLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pair D Length. This indicate the length of cable. " ::= { hwVirtualCableTestEntry 13 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.8 hwTemperatureThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF HwTemperatureThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the alarm thresholds of temperature sensors. You can read information about all the temperature sensors of the device. You can set the alarm threshold of a specified temperature sensor. " ::= { hwEntityState 8 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.8.1 hwTemperatureThresholdEntry OBJECT-TYPE SYNTAX HwTemperatureThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the hwTemperatureThresholdTable." INDEX { hwEntityTempSlotId, hwEntityTempI2CId, hwEntityTempAddr, hwEntityTempChannel } ::= { hwTemperatureThresholdTable 1 } HwTemperatureThresholdEntry ::= SEQUENCE { hwEntityTempSlotId Integer32, hwEntityTempI2CId Integer32, hwEntityTempAddr Integer32, hwEntityTempChannel Integer32, hwEntityTempStatus INTEGER, hwEntityTempValue Integer32, hwEntityTempMinorAlmThreshold Integer32, hwEntityTempMajorAlmThreshold Integer32, hwEntityTempFatalAlmThreshold Integer32 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.8.1.1 hwEntityTempSlotId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the slot ID of a temperature sensor. " ::= { hwTemperatureThresholdEntry 1 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.8.1.2 hwEntityTempI2CId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the I2CID of a temperature sensor. " ::= { hwTemperatureThresholdEntry 2 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.8.1.3 hwEntityTempAddr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the address of a temperature sensor." ::= { hwTemperatureThresholdEntry 3 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.8.1.4 hwEntityTempChannel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the channel of a temperature sensor. " ::= { hwTemperatureThresholdEntry 4 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.8.1.5 hwEntityTempStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), minor(2), major(3), fatal(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current status of a temperature sensor. " ::= { hwTemperatureThresholdEntry 5 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.8.1.6 hwEntityTempValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current value in Celsius of a temperature sensor." ::= { hwTemperatureThresholdEntry 6 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.8.1.7 hwEntityTempMinorAlmThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the threshold for a minor alarm. The value can be set and ranges from 80% to 120% of the default value. The value is in Celsius. " ::= { hwTemperatureThresholdEntry 7 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.8.1.8 hwEntityTempMajorAlmThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the threshold for a major alarm. The value can be set and ranges from 80% to 120% of the default value. The value is in Celsius. " ::= { hwTemperatureThresholdEntry 8 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.8.1.9 hwEntityTempFatalAlmThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the threshold for a fatal alarm. The value can be set and ranges from 80% to 120% of the default value. The value is in Celsius. " ::= { hwTemperatureThresholdEntry 9 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.9 hwVoltageInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwVoltageInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists information about voltage sensors. You can read information about all the voltage sensors of the device. You can set the alarm threshold of a specified voltage sensor. " ::= { hwEntityState 9 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.9.1 hwVoltageInfoEntry OBJECT-TYPE SYNTAX HwVoltageInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the hwVoltageInfoTable." INDEX { hwEntityVolSlot, hwEntityVolI2CId, hwEntityVolAddr, hwEntityVolChannel } ::= { hwVoltageInfoTable 1 } HwVoltageInfoEntry ::= SEQUENCE { hwEntityVolSlot Integer32, hwEntityVolI2CId Integer32, hwEntityVolAddr Integer32, hwEntityVolChannel Integer32, hwEntityVolStatus INTEGER, hwEntityVolRequired Integer32, hwEntityVolCurValue Integer32, hwEntityVolRatio Integer32, hwEntityVolLowAlmMajor Integer32, hwEntityVolLowAlmFatal Integer32, hwEntityVolHighAlmMajor Integer32, hwEntityVolHighAlmFatal Integer32 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.1 hwEntityVolSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the slot ID of a voltage sensor." ::= { hwVoltageInfoEntry 1 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.2 hwEntityVolI2CId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the I2CID of a voltage sensor." ::= { hwVoltageInfoEntry 2 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.3 hwEntityVolAddr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the address of a voltage sensor. " ::= { hwVoltageInfoEntry 3 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.4 hwEntityVolChannel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the channel of a voltage sensor. " ::= { hwVoltageInfoEntry 4 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.5 hwEntityVolStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), major(2), fatal(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current status of a voltage sensor." ::= { hwVoltageInfoEntry 5 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.6 hwEntityVolRequired OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the nominal value in millivolt of a voltage sensor." ::= { hwVoltageInfoEntry 6 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.7 hwEntityVolCurValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current value in millivolt of a voltage sensor." ::= { hwVoltageInfoEntry 7 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.8 hwEntityVolRatio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the voltage ratio of a voltage sensor." ::= { hwVoltageInfoEntry 8 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.9 hwEntityVolLowAlmMajor OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the threshold for a major alarm of low voltage. The value can be set and ranges from 80% to 120% of the default value. The value is in millivolt. " ::= { hwVoltageInfoEntry 9 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.10 hwEntityVolLowAlmFatal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the threshold for a fatal alarm of low voltage. The value can be set and ranges from 80% to 120% of the default value. The value is in millivolt. " ::= { hwVoltageInfoEntry 10 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.11 hwEntityVolHighAlmMajor OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the threshold for a major alarm of high voltage. The value can be set and ranges from 80% to 120% of the default value. The value is in millivolt. " ::= { hwVoltageInfoEntry 11 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.12 hwEntityVolHighAlmFatal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the threshold for a fatal alarm of high voltage. The value can be set and ranges from 80% to 120% of the default value. The value is in millivolt. " ::= { hwVoltageInfoEntry 12 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.10 hwFanStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF HwFanStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the status of fans. You can read the status of the fans on the device." ::= { hwEntityState 10 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.10.1 hwFanStatusEntry OBJECT-TYPE SYNTAX HwFanStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the hwFanStatusTable." INDEX { hwEntityFanSlot, hwEntityFanSn } ::= { hwFanStatusTable 1 } HwFanStatusEntry ::= SEQUENCE { hwEntityFanSlot Integer32, hwEntityFanSn Integer32, hwEntityFanReg INTEGER, hwEntityFanSpdAdjMode INTEGER, hwEntityFanSpeed Integer32, hwEntityFanPresent INTEGER, hwEntityFanState INTEGER } -- 1.3.6.1.4.1.2011.5.25.31.1.1.10.1.1 hwEntityFanSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the slot ID of a fan." ::= { hwFanStatusEntry 1 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.10.1.2 hwEntityFanSn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the serial number of the fan in a certain slot." ::= { hwFanStatusEntry 2 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.10.1.3 hwEntityFanReg OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether the fan is registered." ::= { hwFanStatusEntry 3 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.10.1.4 hwEntityFanSpdAdjMode OBJECT-TYPE SYNTAX INTEGER { auto(1), manual(2), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the speed adjustment mode of the fan." ::= { hwFanStatusEntry 4 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.10.1.5 hwEntityFanSpeed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the rotation speed (in percentage of the full speed) of the fan. " ::= { hwFanStatusEntry 5 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.10.1.6 hwEntityFanPresent OBJECT-TYPE SYNTAX INTEGER { present(1), absent(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the present information of the fan." ::= { hwFanStatusEntry 6 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.10.1.7 hwEntityFanState OBJECT-TYPE SYNTAX INTEGER { normal(1), abnormal(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the state of the fan." ::= { hwFanStatusEntry 7 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.11 hwEntityGlobalPara OBJECT IDENTIFIER ::= { hwEntityState 11 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.11.1 hwEntityServiceType OBJECT-TYPE SYNTAX INTEGER { sslvpn(1), firewall(2), load-balance(3), ipsec(4), netstream(5), wlan(6) } MAX-ACCESS read-only STATUS current DESCRIPTION " It describes the service-type of spu board ." ::= { hwEntityGlobalPara 1 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.12 hwPortBip8StatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPortBip8StatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the BIP8 statistics. This table lists the various BIP8 statistics." ::= { hwEntityState 12 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.12.1 hwPortBip8StatisticsEntry OBJECT-TYPE SYNTAX HwPortBip8StatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the BIP8 statistics. This table lists the various BIP8 statistics." INDEX { entPhysicalIndex } ::= { hwPortBip8StatisticsTable 1 } HwPortBip8StatisticsEntry ::= SEQUENCE{ hwPhysicalPortBip8StatisticsEB Counter64, hwPhysicalPortBip8StatisticsES Counter64, hwPhysicalPortBip8StatisticsSES Counter64, hwPhysicalPortBip8StatisticsUAS Counter64, hwPhysicalPortBip8StatisticsBBE Counter64, hwPhysicalPortSpeed Unsigned32 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.12.1.1 hwPhysicalPortBip8StatisticsEB OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "BIP8 Statistics: EB(Errored Block)." ::= { hwPortBip8StatisticsEntry 1 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.12.1.2 hwPhysicalPortBip8StatisticsES OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "BIP8 Statistics: ES(Errored Second)." ::= { hwPortBip8StatisticsEntry 2 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.12.1.3 hwPhysicalPortBip8StatisticsSES OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "BIP8 Statistics: SES(Severely Errored Second)." ::= { hwPortBip8StatisticsEntry 3 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.12.1.4 hwPhysicalPortBip8StatisticsUAS OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "BIP8 Statistics: UAS(Unavailable Errored Second)." ::= { hwPortBip8StatisticsEntry 4 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.12.1.5 hwPhysicalPortBip8StatisticsBBE OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "BIP8 Statistics: BBE(Background Block Error)." ::= { hwPortBip8StatisticsEntry 5 } -- 1.3.6.1.4.1.2011.5.25.31.1.1.12.1.6 hwPhysicalPortSpeed OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "An estimate of the interface's current bandwidth in 1000000 bits per second." ::= { hwPortBip8StatisticsEntry 6 } -- 1.3.6.1.4.1.2011.5.25.31.2 hwEntityExtTraps OBJECT IDENTIFIER ::= { hwEntityExtentMIB 2 } -- 1.3.6.1.4.1.2011.5.25.31.2.0 hwEntityExtTrapsPrefix OBJECT IDENTIFIER ::= { hwEntityExtTraps 0 } -- 1.3.6.1.4.1.2011.5.25.31.2.0.1 hwEntityExtTemperatureThresholdNotification NOTIFICATION-TYPE OBJECTS { hwEntityTemperature, hwEntityTemperatureThreshold, hwEntityAdminStatus, hwEntityAlarmLight } STATUS current DESCRIPTION " The hwEntityEnvTemperatureThresholdNotification indicates the temperature have been exceed the threshold. In the condition, user should check the hardware and the environment of the entity, sometimes it happened because of the failture of air-condition. Anyway, the threshold should lower than the value that most service work fine. " ::= { hwEntityExtTrapsPrefix 1 } -- 1.3.6.1.4.1.2011.5.25.31.2.0.2 hwEntityExtVoltageLowThresholdNotification NOTIFICATION-TYPE OBJECTS { hwEntityVoltage, hwEntityVoltageLowThreshold, hwEntityAdminStatus, hwEntityAlarmLight } STATUS current DESCRIPTION " The hwEntityExtVoltageLowThresholdNotification indicates the voltage is lower than the threshold. This may decrease the usability of the entity. If the voltage is lower too much than the hardware needed, the entity will stop working. Anyway, the threshold should higher than the value that most service work fine. " ::= { hwEntityExtTrapsPrefix 2 } -- 1.3.6.1.4.1.2011.5.25.31.2.0.3 hwEntityExtVoltageHighThresholdNotification NOTIFICATION-TYPE OBJECTS { hwEntityVoltage, hwEntityVoltageHighThreshold, hwEntityAdminStatus, hwEntityAlarmLight } STATUS current DESCRIPTION " The hwEntityExtVoltageHighThresholdNotification indicates the voltage is higher than the threshold. This may decrease the usability of the entity. If the voltage is higher too much than the hardware needed, the entity may be destroyed by the high voltage. Anyway, the threshold should lower than the value that most service work fine. " ::= { hwEntityExtTrapsPrefix 3 } -- 1.3.6.1.4.1.2011.5.25.31.2.0.4 hwEntityExtCpuUsageThresholdNotfication NOTIFICATION-TYPE OBJECTS { hwEntityCpuUsage, hwEntityCpuUsageThreshold, hwEntityTemperature, hwEntityTemperatureThreshold, hwEntityAdminStatus, hwEntityAlarmLight } STATUS current DESCRIPTION " The hwEntityExtCpuUsageThresholdNotfication indicates the entity is overload, and the service running in the entity will not get the performance it should because of CPU's performance. Anyway, the threshold should lower than the value that most service work fine. " ::= { hwEntityExtTrapsPrefix 4 } -- 1.3.6.1.4.1.2011.5.25.31.2.0.5 hwEntityExtMemUsageThresholdNotification NOTIFICATION-TYPE OBJECTS { hwEntityMemUsage, hwEntityMemUsageThreshold, hwEntityMemSize, hwEntityAdminStatus, hwEntityAlarmLight } STATUS current DESCRIPTION " The hwEntityExtMemUsageThresholdNotification indicates the entity is overload, and the service running in the entity will not get the performance it should because of lower memory. Anyway, the threshold should lower than the value that most service work fine. " ::= { hwEntityExtTrapsPrefix 5 } -- 1.3.6.1.4.1.2011.5.25.31.2.0.6 hwEntityExtOperEnabled NOTIFICATION-TYPE OBJECTS { hwEntityAdminStatus, hwEntityAlarmLight } STATUS current DESCRIPTION "The entity is operational. The entity this notification refers can be identified by extracting the entPhysicalIndex from one of the variable bindings." ::= { hwEntityExtTrapsPrefix 6 } -- 1.3.6.1.4.1.2011.5.25.31.2.0.7 hwEntityExtOperDisabled NOTIFICATION-TYPE OBJECTS { hwEntityAdminStatus, hwEntityAlarmLight } STATUS current DESCRIPTION "The entity is operational. The entity this notification refers can be identified by extracting the entPhysicalIndex from one of the variable bindings." ::= { hwEntityExtTrapsPrefix 7 } -- 1.3.6.1.4.1.2011.5.25.31.2.0.8 hwEntityExtMonitorBoardAbnormalNotification NOTIFICATION-TYPE STATUS current DESCRIPTION "The monitor board turns normal to abnormal." ::= { hwEntityExtTrapsPrefix 8 } -- 1.3.6.1.4.1.2011.5.25.31.2.0.9 hwEntityExtMonitorBoardNormalNotification NOTIFICATION-TYPE STATUS current DESCRIPTION "The monitor board turns abnormal to normal." ::= { hwEntityExtTrapsPrefix 9 } -- 1.3.6.1.4.1.2011.5.25.31.2.0.10 hwEntityExtMonitorPortAbnormalNotification NOTIFICATION-TYPE OBJECTS { hwMonitorInputState, hwMonitorInputName } STATUS current DESCRIPTION "The monitor port turns normal to abnormal." ::= { hwEntityExtTrapsPrefix 10 } -- 1.3.6.1.4.1.2011.5.25.31.2.0.11 hwEntityExtMonitorPortNormalNotification NOTIFICATION-TYPE OBJECTS { hwMonitorInputState, hwMonitorInputName } STATUS current DESCRIPTION "The monitor port turns abnormal to normal." ::= { hwEntityExtTrapsPrefix 11 } -- 1.3.6.1.4.1.2011.5.25.31.2.0.12 hwEntityExtCpuUsageLowThresholdNotfication NOTIFICATION-TYPE OBJECTS { hwEntityCpuUsage, hwEntityCpuUsageThreshold, hwEntityTemperature, hwEntityTemperatureThreshold, hwEntityAdminStatus, hwEntityAlarmLight } STATUS current DESCRIPTION " The hwEntityExtCpuUsageThresholdNotfication indicates the entity is overload, and the service running in the entity will not get the performance it should because of CPU's performance. Anyway, the threshold should lower than the value that most service work fine. " ::= { hwEntityExtTrapsPrefix 12 } -- 1.3.6.1.4.1.2011.5.25.31.3 hwDevicePowerInfoObjects OBJECT IDENTIFIER ::= { hwEntityExtentMIB 3 } -- 1.3.6.1.4.1.2011.5.25.31.3.1 hwDevicePowerInfoTotalPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Device total power." ::= { hwDevicePowerInfoObjects 1 } -- 1.3.6.1.4.1.2011.5.25.31.3.2 hwDevicePowerInfoUsedPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Device used power." ::= { hwDevicePowerInfoObjects 2 } -- 1.3.6.1.4.1.2011.5.25.31.4 hwEntityExtConformance OBJECT IDENTIFIER ::= { hwEntityExtentMIB 4 } -- 1.3.6.1.4.1.2011.5.25.31.4.1 hwEntityExtCompliances OBJECT IDENTIFIER ::= { hwEntityExtConformance 1 } -- 1.3.6.1.4.1.2011.5.25.31.4.1.1 hwEntityExtCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for systems supporting the HUAWEI Entity extent MIB." MODULE -- this module MANDATORY-GROUPS { hwEntityExtGroup } OBJECT hwEntityAdminStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT hwEntityCpuUsageThreshold MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT hwEntityMemUsageThreshold MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT hwEntityTemperatureThreshold MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT hwEntityVoltageLowThreshold MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT hwEntityVoltageHighThreshold MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { hwEntityExtCompliances 1 } -- 1.3.6.1.4.1.2011.5.25.31.4.2 hwEntityExtGroups OBJECT IDENTIFIER ::= { hwEntityExtConformance 2 } -- 1.3.6.1.4.1.2011.5.25.31.4.2.1 hwEntityExtGroup OBJECT-GROUP OBJECTS { hwEntityAdminStatus, hwEntityOperStatus, hwEntityStandbyStatus, hwEntityAlarmLight, hwEntityCpuUsage, hwEntityCpuUsageThreshold, hwEntityMemUsage, hwEntityMemUsageThreshold, hwEntityMemSize, hwEntityUpTime, hwEntityTemperature, hwEntityTemperatureThreshold, hwEntityVoltage, hwEntityVoltageLowThreshold, hwEntityVoltageHighThreshold, hwEntityTemperatureLowThreshold, hwEntityOpticalPower, hwEntityCurrent, hwEntityMemSizeMega, hwEntityPortType, hwEntityDuplex, hwEntityOpticalPowerRx, hwEntityCpuUsageLowThreshold, hwEntityBoardPower, hwEntityCpuFrequency, hwEntitySupportFlexCard, hwEntityBoardClass, hwNseOpmStatus, hwEntityCpuMaxUsage, hwEntityServiceType, hwEntityCPUType, hwEntityMemoryType, hwEntityFlashSize, hwEntityIfUpTimes, hwEntityIfDownTimes, hwEntityCPUAvgUsage, hwEntityMemoryAvgUsage } STATUS current DESCRIPTION "Standard HUAWEI Entity Extent group." ::= { hwEntityExtGroups 1 } -- 1.3.6.1.4.1.2011.5.25.31.4.2.2 hwEntityExtNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { hwEntityExtTemperatureThresholdNotification, hwEntityExtVoltageLowThresholdNotification, hwEntityExtVoltageHighThresholdNotification, hwEntityExtCpuUsageThresholdNotfication, hwEntityExtMemUsageThresholdNotification, hwEntityExtOperEnabled, hwEntityExtOperDisabled, hwEntityExtMonitorBoardAbnormalNotification, hwEntityExtMonitorBoardNormalNotification, hwEntityExtMonitorPortAbnormalNotification, hwEntityExtMonitorPortNormalNotification, hwEntityExtCpuUsageLowThresholdNotfication } STATUS current DESCRIPTION "Standard HUAWEI Entity Extent Notification group." ::= { hwEntityExtGroups 2 } -- 1.3.6.1.4.1.2011.5.25.31.4.2.3 hwRUModuleInfoGroup OBJECT-GROUP OBJECTS { hwEntityBomId, hwEntityBomEnDesc, hwEntityManufacturedDate, hwEntityCLEICode, hwEntityArchivesInfoVersion, hwEntityOpenBomId, hwEntityIssueNum, hwEntityBoardType } STATUS current DESCRIPTION "Standard HUAWEI Entity Extent group." ::= { hwEntityExtGroups 3 } -- 1.3.6.1.4.1.2011.5.25.31.4.2.4 hwEntityExtOldObjectsGroup OBJECT-GROUP OBJECTS { hwEntityBomLocalDesc, hwEntityManufactureCode, hwEntityUpdateLog } STATUS obsolete DESCRIPTION "Group for old objects that may be obsoleted." ::= { hwEntityExtGroups 4 } -- 1.3.6.1.4.1.2011.5.25.31.4.2.5 hwOpticalModuleInfoGroup OBJECT-GROUP OBJECTS { hwEntityOpticalMode, hwEntityOpticalWaveLength, hwEntityOpticalTransDistance, hwEntityOpticalVendorSn, hwEntityOpticalTemperature, hwEntityOpticalVoltage, hwEntityOpticalBiasCurrent, hwEntityOpticalRxPower, hwEntityOpticalTxPower, hwEntityOpticalType, hwEntityOpticalTransBW, hwEntityOpticalFiberType, hwEntityOpticalRxLowThreshold, hwEntityOpticalRxHighThreshold, hwEntityOpticalTxLowThreshold, hwEntityOpticalTxHighThreshold, hwEntityOpticalPlug, hwEntityOpticalDirectionType, hwEntityOpticalUserEeprom } STATUS current DESCRIPTION "Collection of objects that display the fiber module working information." ::= { hwEntityExtGroups 5 } -- 1.3.6.1.4.1.2011.5.25.31.4.2.6 hwMonitorInputGroup OBJECT-GROUP OBJECTS { hwMonitorInputName, hwMonitorInputState, hwMonitorInputStateEnable, hwMonitorInputRowStatus } STATUS current DESCRIPTION "Standard HUAWEI Entity Extent group." ::= { hwEntityExtGroups 6 } -- 1.3.6.1.4.1.2011.5.25.31.4.2.7 hwMonitorOutputGroup OBJECT-GROUP OBJECTS { hwMonitorOutputMask, hwMonitorOutputKey, hwMonitorOutputRowStatus } STATUS current DESCRIPTION "Standard HUAWEI Entity Extent group." ::= { hwEntityExtGroups 7 } -- 1.3.6.1.4.1.2011.5.25.31.4.2.8 hwEntPowerUsedInfoGroup OBJECT-GROUP OBJECTS { hwEntPowerUsedInfoBoardName, hwEntPowerUsedInfoBoardType, hwEntPowerUsedInfoBoardSlot, hwEntPowerUsedInfoPower } STATUS current DESCRIPTION "Collection of objects that display the power informations of entity." ::= { hwEntityExtGroups 8 } -- 1.3.6.1.4.1.2011.5.25.31.4.2.9 hwDevicePowerInfoGroup OBJECT-GROUP OBJECTS { hwDevicePowerInfoTotalPower, hwDevicePowerInfoUsedPower } STATUS current DESCRIPTION "Collection of objects that display the power informations of device." ::= { hwEntityExtGroups 9 } -- 1.3.6.1.4.1.2011.5.25.31.4.2.10 hwVirtualCableTestGroup OBJECT-GROUP OBJECTS { hwVirtualCableTestPairStatus, hwVirtualCableTestPairLength, hwVirtualCableTestOperation, hwVirtualCableTestLastTime, hwVirtualCableTestPairAStatus,hwVirtualCableTestPairBStatus,hwVirtualCableTestPairCStatus,hwVirtualCableTestPairDStatus, hwVirtualCableTestPairALength,hwVirtualCableTestPairBLength,hwVirtualCableTestPairCLength,hwVirtualCableTestPairDLength} STATUS current DESCRIPTION "Collection of objects that display the status of cable." ::= { hwEntityExtGroups 10 } -- 1.3.6.1.4.1.2011.5.25.31.4.2.11 hwTemperatureThresholdGroup OBJECT-GROUP OBJECTS { hwEntityTempSlotId, hwEntityTempI2CId, hwEntityTempAddr, hwEntityTempChannel, hwEntityTempStatus, hwEntityTempValue, hwEntityTempMinorAlmThreshold, hwEntityTempMajorAlmThreshold, hwEntityTempFatalAlmThreshold } STATUS current DESCRIPTION "Temperature threshold group." ::= { hwEntityExtGroups 11 } -- 1.3.6.1.4.1.2011.5.25.31.4.2.12 hwVoltageInfoGroup OBJECT-GROUP OBJECTS { hwEntityVolSlot, hwEntityVolI2CId, hwEntityVolAddr, hwEntityVolChannel, hwEntityVolStatus, hwEntityVolRequired, hwEntityVolLowAlmMajor, hwEntityVolLowAlmFatal, hwEntityVolHighAlmMajor, hwEntityVolHighAlmFatal, hwEntityVolCurValue, hwEntityVolRatio } STATUS current DESCRIPTION "Voltage info group." ::= { hwEntityExtGroups 12 } -- 1.3.6.1.4.1.2011.5.25.31.4.2.13 hwFanStatusGroup OBJECT-GROUP OBJECTS { hwEntityFanSlot, hwEntityFanSn, hwEntityFanReg, hwEntityFanSpdAdjMode, hwEntityFanSpeed,hwEntityFanPresent,hwEntityFanState } STATUS current DESCRIPTION "fan state group." ::= { hwEntityExtGroups 13 } -- 1.3.6.1.4.1.2011.5.25.31.4.2.14 hwPnpGroup OBJECT-GROUP OBJECTS { hwHardwareCapaSequenceNo, hwFileGeneIndex, hwFileGeneResourceType, hwFileGeneResourceID, hwFileGeneDestinationFile, hwFileGeneOperState, hwFileGeneRowStatus } STATUS current DESCRIPTION "Pnp group." ::= { hwEntityExtGroups 14 } -- 1.3.6.1.4.1.2011.5.25.31.4.2.15 hwSystemGlobalGroup OBJECT-GROUP OBJECTS { hwEntitySystemNetID, hwEntitySoftwareName, hwEntitySoftwareVersion, hwEntitySoftwareVendor, hwEntitySystemModel, hwEntitySystemTime, hwEntitySystemMacAddress, hwEntitySystemReset, hwEntitySystemHealthInterval, hwEntitySystemNEId } STATUS current DESCRIPTION "System global group." ::= { hwEntityExtGroups 15 } -- 1.3.6.1.4.1.2011.5.25.31.4.2.16 hwHeartbeatGroup OBJECT-GROUP OBJECTS { hwEntityHeartbeatOnOff, hwEntityHeartbeatPeriod, hwEntityHeartbeatTrap } STATUS current DESCRIPTION "Heart beat group." ::= { hwEntityExtGroups 16 } -- 1.3.6.1.4.1.2011.5.25.31.4.2.17 hwPortBip8StatisticsObjectGroup OBJECT-GROUP OBJECTS{ hwPhysicalPortBip8StatisticsEB, hwPhysicalPortBip8StatisticsES, hwPhysicalPortBip8StatisticsSES, hwPhysicalPortBip8StatisticsUAS, hwPhysicalPortBip8StatisticsBBE } STATUS current DESCRIPTION "The BIP8 statistics group." ::= { hwEntityExtGroups 17 } -- 1.3.6.1.4.1.2011.5.25.31.4.2.18 hwPredisposeGroup OBJECT-GROUP OBJECTS { hwPreDisposeSequenceNo, hwDisposeSlot, hwDisposeCardId, hwDisposeSbom, hwDisposeRowStatus, hwDisposeOperState, hwDisposeEntPhysicalIndex, hwDisposeEntPhysicalDescr, hwDisposeEntPhysicalVendorType, hwDisposeEntPhysicalContainedIn, hwDisposeEntPhysicalClass, hwDisposeEntPhysicalParentRelPos, hwDisposeEntPhysicalName } STATUS current DESCRIPTION "Pnp group." ::= { hwEntityExtGroups 18 } -- 1.3.6.1.4.1.2011.5.25.31.5 hwPnpObjects OBJECT IDENTIFIER ::= { hwEntityExtentMIB 5 } -- 1.3.6.1.4.1.2011.5.25.31.5.1 hwPnpInfo OBJECT IDENTIFIER ::= { hwPnpObjects 1 } -- 1.3.6.1.4.1.2011.5.25.31.5.1.1 hwHardwareCapaSequenceNo OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the sequence number of the 'hardware capability file'.The value consists of the file version number and CRC code." ::= { hwPnpInfo 1 } -- 1.3.6.1.4.1.2011.5.25.31.5.2 hwPnpTraps OBJECT IDENTIFIER ::= { hwPnpObjects 2 } -- 1.3.6.1.4.1.2011.5.25.31.5.2.1 hwHardwareCapaChangeNotification NOTIFICATION-TYPE OBJECTS { hwHardwareCapaSequenceNo } STATUS current DESCRIPTION "This object indicates the change of the 'hardware capability file'. An alarm is generated if the sequence number of the 'hardware capability file' in the current startup file is different from that in the last startup file." ::= { hwPnpTraps 1 } -- 1.3.6.1.4.1.2011.5.25.31.5.3 hwPnpOperateTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPnpOperateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes the hardware functions. Using this table, you can obtain the specified 'hardware description file' or 'hardware capability file'." ::= { hwPnpObjects 3 } -- 1.3.6.1.4.1.2011.5.25.31.5.3.1 hwPnpOperateEntry OBJECT-TYPE SYNTAX HwPnpOperateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { hwFileGeneIndex } ::= { hwPnpOperateTable 1 } HwPnpOperateEntry ::= SEQUENCE { hwFileGeneIndex Integer32, hwFileGeneOperState INTEGER, hwFileGeneResourceType INTEGER, hwFileGeneResourceID SnmpAdminString, hwFileGeneDestinationFile SnmpAdminString, hwFileGeneRowStatus RowStatus } -- 1.3.6.1.4.1.2011.5.25.31.5.3.1.1 hwFileGeneIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of this object identifies the operation index, which can be specified by the user. The value ranges from 1 to 2147483647." ::= { hwPnpOperateEntry 1 } -- 1.3.6.1.4.1.2011.5.25.31.5.3.1.2 hwFileGeneOperState OBJECT-TYPE SYNTAX INTEGER { opInProgress(1), opSuccess(2), opGetFileError(3), opInvalidDestName(4), opNoFlashSpace(5), opWriteFileError(6), opDestoryError(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object identifies the operation status. opInProgress(1): The operation is ongoing. opSuccess(2): The operation succeeds. opGetFileError(3): Obtaining the file fails. opInvalidDestName(4): The specified storage path is invalid. opNoFlashSpace(5): The space in the flash memory is insufficient. opWriteFileError(6): Writing the file fails. opDestoryError(7): Deleting the file fails." ::= { hwPnpOperateEntry 2 } -- 1.3.6.1.4.1.2011.5.25.31.5.3.1.3 hwFileGeneResourceType OBJECT-TYPE SYNTAX INTEGER { pnpcard(1), pnpsubcard(2), pnphardcapability(3), pnpPreDisposeCapability(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the type of the file to be obtained. pnpcard(1): board description file pnpcard(2): subcard description file pnphardcapability(3): hardware capability file pnpPreDisposeCapability(4): predispose capability file" ::= { hwPnpOperateEntry 3 } -- 1.3.6.1.4.1.2011.5.25.31.5.3.1.4 hwFileGeneResourceID OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the ID of the 'hardware capability file' to be obtained." ::= { hwPnpOperateEntry 4 } -- 1.3.6.1.4.1.2011.5.25.31.5.3.1.5 hwFileGeneDestinationFile OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the target path storing the file, which does not need to be specified." ::= { hwPnpOperateEntry 5 } -- 1.3.6.1.4.1.2011.5.25.31.5.3.1.6 hwFileGeneRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the row status. active(1) notInService(2) notReady(3) createAndGo(4) createAndWait(5) destroy(6)" ::= { hwPnpOperateEntry 6 } -- 1.3.6.1.4.1.2011.5.25.31.6 hwSystemGlobalObjects OBJECT IDENTIFIER ::= { hwEntityExtentMIB 6 } -- 1.3.6.1.4.1.2011.5.25.31.6.1 hwEntitySystemNetID OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-write STATUS current DESCRIPTION "Network element ID." ::= { hwSystemGlobalObjects 1 } -- 1.3.6.1.4.1.2011.5.25.31.6.2 hwEntitySoftwareName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "System software name." ::= { hwSystemGlobalObjects 2 } -- 1.3.6.1.4.1.2011.5.25.31.6.3 hwEntitySoftwareVersion OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Software version number. " ::= { hwSystemGlobalObjects 3 } -- 1.3.6.1.4.1.2011.5.25.31.6.4 hwEntitySoftwareVendor OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Software vendor." ::= { hwSystemGlobalObjects 4 } -- 1.3.6.1.4.1.2011.5.25.31.6.5 hwEntitySystemModel OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Device model." ::= { hwSystemGlobalObjects 5 } -- 1.3.6.1.4.1.2011.5.25.31.6.6 hwEntitySystemTime OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "System time displayed on the device." ::= { hwSystemGlobalObjects 6 } -- 1.3.6.1.4.1.2011.5.25.31.6.7 hwEntitySystemMacAddress OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address of the device." ::= { hwSystemGlobalObjects 7 } -- 1.3.6.1.4.1.2011.5.25.31.6.8 hwEntitySystemReset OBJECT-TYPE SYNTAX INTEGER { normal(1), restart(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "System reset." ::= { hwSystemGlobalObjects 8 } -- 1.3.6.1.4.1.2011.5.25.31.6.9 hwEntitySystemHealthInterval OBJECT-TYPE SYNTAX Integer32 (5..900) MAX-ACCESS read-write STATUS current DESCRIPTION "Statistical interval for average CPU and memory usage, in seconds (By default, the value is 300) ." ::= { hwSystemGlobalObjects 9 } -- 1.3.6.1.4.1.2011.5.25.31.6.10 hwEntitySystemNEId OBJECT-TYPE SYNTAX Integer32 (0..16777215) MAX-ACCESS read-write STATUS current DESCRIPTION "Systme NEId." ::= { hwSystemGlobalObjects 10 } -- 1.3.6.1.4.1.2011.5.25.31.7 hwHeartbeatObjects OBJECT IDENTIFIER ::= { hwEntityExtentMIB 7 } -- 1.3.6.1.4.1.2011.5.25.31.7.1 hwHeartbeatConfig OBJECT IDENTIFIER ::= { hwHeartbeatObjects 1 } -- 1.3.6.1.4.1.2011.5.25.31.7.1.1 hwEntityHeartbeatOnOff OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Whether Heartbeat sending periodically enabled." ::= { hwHeartbeatConfig 1 } -- 1.3.6.1.4.1.2011.5.25.31.7.1.2 hwEntityHeartbeatPeriod OBJECT-TYPE SYNTAX Integer32 (60..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "Heartbeat sending period detected in the trap reporting channel, with the minimum value of 60 seconds." ::= { hwHeartbeatConfig 2 } -- 1.3.6.1.4.1.2011.5.25.31.7.2 hwHeartbeatTrapPrefix OBJECT IDENTIFIER ::= { hwHeartbeatObjects 2 } -- 1.3.6.1.4.1.2011.5.25.31.7.2.1 hwEntityHeartbeatTrap NOTIFICATION-TYPE STATUS current DESCRIPTION "Heartbeat trap." ::= { hwHeartbeatTrapPrefix 1 } -- 1.3.6.1.4.1.2011.5.25.31.8 hwPreDisposeObjects OBJECT IDENTIFIER ::= { hwEntityExtentMIB 8 } -- 1.3.6.1.4.1.2011.5.25.31.8.1 hwPreDisposeInfo OBJECT IDENTIFIER ::= { hwPreDisposeObjects 1 } -- 1.3.6.1.4.1.2011.5.25.31.8.1.1 hwPreDisposeSequenceNo OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the sequence number of the 'predispose capability file'.The value consists of the file version number and CRC code." ::= { hwPreDisposeInfo 1 } -- 1.3.6.1.4.1.2011.5.25.31.8.2 hwPreDisposedTraps OBJECT IDENTIFIER ::= { hwPreDisposeObjects 2 } -- 1.3.6.1.4.1.2011.5.25.31.8.2.1 hwInsertDiffFromPreDisposed NOTIFICATION-TYPE OBJECTS { hwDisposeEntPhysicalIndex, hwDisposeEntPhysicalVendorType, entPhysicalVendorType } STATUS current DESCRIPTION "This object indicates the type of the inserted entity is different from that of pre-disposed entity on the slot." ::= { hwPreDisposedTraps 1 } -- 1.3.6.1.4.1.2011.5.25.31.8.2.2 hwPreDisposedChangeNotification NOTIFICATION-TYPE OBJECTS { hwPreDisposeSequenceNo } STATUS current DESCRIPTION "This object indicates the change of the 'predispose capability file'. An alarm is generated if the sequence number of the 'predispose capability file' in the current startup file is different from that in the last startup file." ::= { hwPreDisposedTraps 2 } -- 1.3.6.1.4.1.2011.5.25.31.8.3 hwPreDisposeConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPreDisposeConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of predisposing boards or flexible subcards." ::= { hwPreDisposeObjects 3 } -- 1.3.6.1.4.1.2011.5.25.31.8.3.1 hwPreDisposeConfigEntry OBJECT-TYPE SYNTAX HwPreDisposeConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of the table to predispose boards or flexible subcards." INDEX { hwDisposeSlot, hwDisposeCardId } ::= { hwPreDisposeConfigTable 1 } HwPreDisposeConfigEntry ::= SEQUENCE { hwDisposeSlot Integer32, hwDisposeCardId Integer32, hwDisposeSbom OCTET STRING, hwDisposeRowStatus RowStatus, hwDisposeOperState INTEGER } -- 1.3.6.1.4.1.2011.5.25.31.8.3.1.1 hwDisposeSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the slot ID of predisposed board. " ::= { hwPreDisposeConfigEntry 1 } -- 1.3.6.1.4.1.2011.5.25.31.8.3.1.2 hwDisposeCardId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the card ID of predisposed subcard. " ::= { hwPreDisposeConfigEntry 2 } -- 1.3.6.1.4.1.2011.5.25.31.8.3.1.3 hwDisposeSbom OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the sbom information of predisposed board or subcard. " ::= { hwPreDisposeConfigEntry 3 } -- 1.3.6.1.4.1.2011.5.25.31.8.3.1.4 hwDisposeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the row status when config predispose. active(1) notInService(2) notReady(3) createAndGo(4) createAndWait(5) destroy(6)" ::= { hwPreDisposeConfigEntry 4 } -- 1.3.6.1.4.1.2011.5.25.31.8.3.1.5 hwDisposeOperState OBJECT-TYPE SYNTAX INTEGER { opSuccess(1), opInProgress(2), opDevNotSupportPredispose(3), opCardNotSupportPredispose(4), opAlreadyPredispose(5), opCardConflict(6), opDevOperationError(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object identifies the operation status. opSuccess(1): The operation succeeds. opInProgress(2): The operation is ongoing. opDevNotSupportPredispose(3): The device does not support predispose. opCardNotSupportPredispose(4): The type of card or subcard is not supported to be predisposed on this device. opAlreadyPredispose(5): The slot or subslot has already been predisposed. opCardConflict(6): The slot or subslot to be predisposed conflict with others. opDevOperationError(7): Other error occurs on the device." ::= { hwPreDisposeConfigEntry 5 } -- 1.3.6.1.4.1.2011.5.25.31.8.4 hwPreDisposeEntInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPreDisposeEntInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to get the information of predisposed entitys." ::= { hwPreDisposeObjects 4 } -- 1.3.6.1.4.1.2011.5.25.31.8.4.1 hwPreDisposeEntInfoEntry OBJECT-TYPE SYNTAX HwPreDisposeEntInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of the table to get the information of predisposed entitys." INDEX { hwDisposeEntPhysicalIndex } ::= { hwPreDisposeEntInfoTable 1 } HwPreDisposeEntInfoEntry ::= SEQUENCE { hwDisposeEntPhysicalIndex PhysicalIndex, hwDisposeEntPhysicalDescr SnmpAdminString, hwDisposeEntPhysicalVendorType AutonomousType, hwDisposeEntPhysicalContainedIn Integer32, hwDisposeEntPhysicalClass PhysicalClass, hwDisposeEntPhysicalParentRelPos Integer32, hwDisposeEntPhysicalName SnmpAdminString } -- 1.3.6.1.4.1.2011.5.25.31.8.4.1.1 hwDisposeEntPhysicalIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for this entry." ::= { hwPreDisposeEntInfoEntry 1 } -- 1.3.6.1.4.1.2011.5.25.31.8.4.1.2 hwDisposeEntPhysicalDescr OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "A textual description of predisposed physical entity.This object should contain a string which identifies the manufacturer's name for the physical entity. " ::= { hwPreDisposeEntInfoEntry 2 } -- 1.3.6.1.4.1.2011.5.25.31.8.4.1.3 hwDisposeEntPhysicalVendorType OBJECT-TYPE SYNTAX AutonomousType MAX-ACCESS read-only STATUS current DESCRIPTION "An indication of the vendor-specific hardware type of the predisposed physical entity. " ::= { hwPreDisposeEntInfoEntry 3 } -- 1.3.6.1.4.1.2011.5.25.31.8.4.1.4 hwDisposeEntPhysicalContainedIn OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of 'entPhysicalContainedIn' for the predisposed physical entity." ::= { hwPreDisposeEntInfoEntry 4 } -- 1.3.6.1.4.1.2011.5.25.31.8.4.1.5 hwDisposeEntPhysicalClass OBJECT-TYPE SYNTAX PhysicalClass MAX-ACCESS read-only STATUS current DESCRIPTION "An indication of the general hardware type of the predisposed physical entity." ::= { hwPreDisposeEntInfoEntry 5 } -- 1.3.6.1.4.1.2011.5.25.31.8.4.1.6 hwDisposeEntPhysicalParentRelPos OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An indication of the relative position of this 'child' component among all its 'sibling' components." ::= { hwPreDisposeEntInfoEntry 6 } -- 1.3.6.1.4.1.2011.5.25.31.8.4.1.7 hwDisposeEntPhysicalName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The textual name of the predisposed physical entity." ::= { hwPreDisposeEntInfoEntry 7 } END -- -- HUAWEI-ENTITY-EXTENT-MIB.mib --