-- ===================================================================== -- Copyright (C) 2009 by HUAWEI TECHNOLOGIES. All rights reserved. -- -- Description: Huawei Stack MIB -- Reference: HUAWEI Stack MIB -- Version: V1.0 -- History: -- Friday, May 06, 2011 at 15:29:31 -- -- ===================================================================== HUAWEI-STACK-MIB DEFINITIONS ::= BEGIN IMPORTS entPhysicalIndex FROM ENTITY-MIB OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF Integer32, IpAddress, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI EnabledStatus FROM P-BRIDGE-MIB TruthValue, MacAddress, RowStatus FROM SNMPv2-TC hwDatacomm FROM HUAWEI-MIB; huaweiStackMIB MODULE-IDENTITY LAST-UPDATED "200902090000Z" -- February 09, 2009 GMT ORGANIZATION "Huawei Technologies Co., Ltd." CONTACT-INFO " VRP V5R3C19 ------ NSP" DESCRIPTION " " ::= { hwDatacomm 183 } -- -- Node definitions -- hwStackObject OBJECT IDENTIFIER ::= { huaweiStackMIB 1 } hwStackRun OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The state of stack function on the device. The value enabled(1) indicates this device's stack function is enabled. The value disabled(2) indicates this device's stack function is disabled." ::= { hwStackObject 1 } hwStackTopoType OBJECT-TYPE SYNTAX INTEGER { ring(1), link(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The topology of stack. " ::= { hwStackObject 2 } hwStackMacAddressSwitchTime OBJECT-TYPE SYNTAX Integer32 (0..60 | 255) MAX-ACCESS read-write STATUS current DESCRIPTION "Stack system's MAC address switch time. " ::= { hwStackObject 3 } hwStackSystemMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The stack system's MAC address, it always be the master device's MAC address. " ::= { hwStackObject 4 } hwStackIsStackDevice OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value true(1) indicates that the device's stack function is enable and it is in a stack system. When false(2), the stack function is not enable or it is not in a stack system. " ::= { hwStackObject 5 } hwStackReservedVlanId OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Stack reserved-vlanId. " ::= { hwStackObject 6 } hwStackClearUnsupportCfg OBJECT-TYPE SYNTAX Integer32 (1) MAX-ACCESS read-write STATUS current DESCRIPTION "Clear the config which is not support stack. " ::= { hwStackObject 7 } -- -- TABLE: hwStackMemberInfoTable definition -- hwStackMemberInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwStackMemberInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of stack member switches. " ::= { hwStackObject 20 } hwStackMemberInfoEntry OBJECT-TYPE SYNTAX HwStackMemberInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provide information of stack member." INDEX { hwMemberCurrentStackId } ::= { hwStackMemberInfoTable 1 } HwStackMemberInfoEntry ::= SEQUENCE{ hwMemberCurrentStackId Integer32, hwMemberStackPriority Integer32, hwMemberStackRole INTEGER, hwMemberStackMacAddress OCTET STRING, hwMemberStackDeviceType OCTET STRING, hwMemberConfigStackId Integer32, hwMemberStackObjectId OBJECT IDENTIFIER } hwMemberCurrentStackId OBJECT-TYPE SYNTAX Integer32 (0..16) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Current stack ID. " ::= { hwStackMemberInfoEntry 1 } hwMemberStackPriority OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Stack member's priority. " ::= { hwStackMemberInfoEntry 2 } hwMemberStackRole OBJECT-TYPE SYNTAX INTEGER { master(1), standby(2), slave(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The role of stack device in stack system. " ::= { hwStackMemberInfoEntry 3 } hwMemberStackMacAddress OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address of the stack device. " ::= { hwStackMemberInfoEntry 4 } hwMemberStackDeviceType OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Device type of the stack device. " ::= { hwStackMemberInfoEntry 5 } hwMemberConfigStackId OBJECT-TYPE SYNTAX Integer32 (0..16) MAX-ACCESS read-write STATUS current DESCRIPTION "Set stack device stack ID. " ::= { hwStackMemberInfoEntry 6 } hwMemberStackObjectId OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining `what kind of box' is being managed. For example, if vendor `Flintstones, Inc.' was assigned the subtree 1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'." ::= { hwStackMemberInfoEntry 7 } -- -- TABLE: hwStackPortTable definition -- hwStackPortTable OBJECT-TYPE SYNTAX SEQUENCE OF HwStackPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of stack port. " ::= { hwStackObject 21 } hwStackPortEntry OBJECT-TYPE SYNTAX HwStackPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provide information of the stack port. " INDEX { hwStackPortStackId ,hwStackPortId } ::= { hwStackPortTable 1 } HwStackPortEntry ::= SEQUENCE { hwStackPortStackId Integer32, hwStackPortId Integer32, hwStackPortName OCTET STRING, hwStackNeighborInfo OCTET STRING, hwStackPortStatus INTEGER } hwStackPortStackId OBJECT-TYPE SYNTAX Integer32 (0..16) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Stack device's ID. " ::= { hwStackPortEntry 1 } hwStackPortId OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Stack port ID. " ::= { hwStackPortEntry 2 } hwStackPortName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Stack port name. " ::= { hwStackPortEntry 3 } hwStackNeighborInfo OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Stack neighbor ID. " ::= { hwStackPortEntry 4 } hwStackPortStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the stack port. " ::= { hwStackPortEntry 5 } -- -- Trap :hwStackEventsV2 definition -- hwStackEventsV2 OBJECT IDENTIFIER ::= { hwStackObject 22 } hwStackLinkUp NOTIFICATION-TYPE OBJECTS {hwStackPortStackId,hwStackPortId,hwStackPortStatus} STATUS current DESCRIPTION "When the stack link turn to up status, send a SNMP trap to network manager." ::= { hwStackEventsV2 1 } hwStackLinkDown NOTIFICATION-TYPE OBJECTS {hwStackPortStackId,hwStackPortId,hwStackPortStatus} STATUS current DESCRIPTION "When the stack link turn to down status, send a SNMP trap to network manager." ::= { hwStackEventsV2 2 } hwStackStandbyChange NOTIFICATION-TYPE OBJECTS { hwMemberCurrentStackId } STATUS current DESCRIPTION "When the stack standby device change, send a SNMP trap to network manager." ::= { hwStackEventsV2 3 } hwStackSwitchOver NOTIFICATION-TYPE OBJECTS { hwMemberCurrentStackId } STATUS current DESCRIPTION "When the stack main device change, send a SNMP trap to network manager." ::= { hwStackEventsV2 4 } hwStackSystemRestart NOTIFICATION-TYPE OBJECTS { hwMemberCurrentStackId } STATUS current DESCRIPTION "When the stack system restart, send a SNMP trap to network manager." ::= { hwStackEventsV2 5 } hwStackStackMemberAdd NOTIFICATION-TYPE OBJECTS { hwMemberCurrentStackId } STATUS current DESCRIPTION " When a stack member join in, send a SNMP trap to network manager. " ::= { hwStackEventsV2 6 } hwStackStackMemberLeave NOTIFICATION-TYPE OBJECTS { hwMemberCurrentStackId } STATUS current DESCRIPTION " When a stack member leave, send a SNMP trap to the network manager." ::= { hwStackEventsV2 7 } hwStackStackMacChange NOTIFICATION-TYPE OBJECTS { hwMemberStackMacAddress } STATUS current DESCRIPTION " When the main stack device change, the stack system's MAC address should change also. And we can set the MAC address change time. When the MAC address change,send a SNMP trap to network manager." ::= { hwStackEventsV2 8 } hwStackLogicStackPortLinkErr NOTIFICATION-TYPE OBJECTS { hwStackLocalIfName,hwStackPeerIfName } STATUS current DESCRIPTION " When the stack port connect error,send a SNMP trap to network manager." ::= { hwStackEventsV2 9 } hwStackPhyStackPortLinkErr NOTIFICATION-TYPE OBJECTS { hwStackLocalIfName,hwStackPeerIfName } STATUS current DESCRIPTION " When the stack port connect error,send a SNMP trap to network manager." ::= { hwStackEventsV2 10 } hwPhyStackPortIsDown NOTIFICATION-TYPE OBJECTS { hwStackLocalIfName } STATUS current DESCRIPTION " When the stack port link state is down,send a SNMP trap to network manager." ::= { hwStackEventsV2 11 } -- -- TABLE: hwStackUpgradeTable definition -- hwStackUpgradeTable OBJECT-TYPE SYNTAX SEQUENCE OF HwStackUpgradeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of flash copy operation entries. Each entry represents a flash copy operation (to flash) that has been initiated." ::= { hwStackObject 30 } hwStackUpgradeEntry OBJECT-TYPE SYNTAX HwStackUpgradeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A flash copy operation entry. Each entry consists of a command, a source, and optional parameters such as protocol to be used, a destination, a server address, etc. A management station wishing to create an entry should first generate a pseudo-random serial number to be used as the index to this sparse table. The station should then create the associated instance of the row status object. It must also, either in the same or in successive PDUs, create the associated instance of the command and parameter objects. It should also modify the default values for any of the parameter objects if the defaults are not appropriate. Once the appropriate instances of all the command objects have been created, either by an explicit SNMP set request or by default, the row status should be set to active to initiate the operation. Note that this entire procedure may be initiated via a single set request which specifies a row status of createAndGo as well as specifies valid values for the non-defaulted parameter objects. Once an operation has been activated, it cannot be stopped. Once the operation completes, the management station should retrieve the value of the status object, and delete the entry. In order to prevent old entries from clogging the table, entries will be aged out, but an entry will never be deleted within 2 hours of completing." INDEX { hwStackUpgradeIndex } ::= { hwStackUpgradeTable 1 } HwStackUpgradeEntry ::= SEQUENCE { hwStackUpgradeIndex Integer32, hwStackUpgradeGrpType INTEGER, hwStackUpgradeGrpValue OCTET STRING, hwStackUpgradeFileType INTEGER, hwStackUpgradeFileInfo OCTET STRING, hwStackUpgradeFtpIp IpAddress, hwStackUpgradeFtpUserName OCTET STRING, hwStackUpgradeFtpPassword OCTET STRING, hwStackUpgradeServerPort Integer32, hwStackUpgradeFileSize Integer32, hwStackUpgradeTransmitProtocol INTEGER, hwStackUpgradeRowStatus RowStatus } hwStackUpgradeIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Specifies the index of an entry. It is a random value when creating an entry." ::= { hwStackUpgradeEntry 1 } hwStackUpgradeGrpType OBJECT-TYPE SYNTAX INTEGER { allMembers(1), memberIdList(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Type of stack grouping member switches." DEFVAL { allMembers } ::= { hwStackUpgradeEntry 2 } hwStackUpgradeGrpValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..18)) MAX-ACCESS read-create STATUS current DESCRIPTION "Details about stack grouping member switches for memberIdList. Optional, This object will be ignored for allMembers ." ::= { hwStackUpgradeEntry 3 } hwStackUpgradeFileType OBJECT-TYPE SYNTAX INTEGER { startupFile(1), patchFile(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Type of the file to be upgraded." ::= { hwStackUpgradeEntry 4 } hwStackUpgradeFileInfo OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Path and type of the file to be upgraded." ::= { hwStackUpgradeEntry 5 } hwStackUpgradeFtpIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The address of remote host acting as server for any operation. The default value of which is 255.255.255.255." DEFVAL { 'FFFFFFFF'h } ::= { hwStackUpgradeEntry 6 } hwStackUpgradeFtpUserName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "When use FTP to transfer files, the user name must be specified by this node." ::= { hwStackUpgradeEntry 7 } hwStackUpgradeFtpPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Remote user password for copy via FTP protocol. " ::= { hwStackUpgradeEntry 8 } hwStackUpgradeServerPort OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION " This object specifies the SFTP server port that is used for file transfer only SFTP is valid. The default SFTP server port is 22 if no port is specified. If the value of protocol is not SFTP, this object is ignored by the implementation." ::= { hwStackUpgradeEntry 9 } hwStackUpgradeFileSize OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the reserved space (in BYTE) guaranteed by a host. The value 0 indicates that no space need be reserved. This object is optional in the Set operation of file upload. The default value is 0. This object is unavailable in the Set operation of file download. " ::= { hwStackUpgradeEntry 10 } hwStackUpgradeTransmitProtocol OBJECT-TYPE SYNTAX INTEGER { ftp(1), sftp(2), tftp(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the protocol used to transfer file. The default value of it is FTP." DEFVAL { ftp } ::= { hwStackUpgradeEntry 11 } hwStackUpgradeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry. Only used createAndGo and destroy." ::= { hwStackUpgradeEntry 51 } -- -- TABLE: hwStackMemberPortEnableTable definition -- hwStackMemberPortEnableTable OBJECT-TYPE SYNTAX SEQUENCE OF HwStackMemberPortEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of stack physical port. " ::= { hwStackObject 23 } hwStackMemberPortEnableEntry OBJECT-TYPE SYNTAX HwStackMemberPortEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provide information of the physical port. " INDEX { entPhysicalIndex } ::= { hwStackMemberPortEnableTable 1 } HwStackMemberPortEnableEntry ::= SEQUENCE { hwEnableStackMode INTEGER } hwEnableStackMode OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If enable stack mode. " DEFVAL { no } ::= { hwStackMemberPortEnableEntry 1 } -- -- TABLE: hwAddingPhyPortToStackPortTable definition -- hwAddingPhyPortToStackPortTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAddingPhyPortToStackPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of a stack port's member port. " ::= { hwStackObject 24 } hwAddingPhyPortToStackPortEntry OBJECT-TYPE SYNTAX HwAddingPhyPortToStackPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provide information of a stack port's member port. " INDEX { hwEnabledStackModePhyPortIndex } ::= { hwAddingPhyPortToStackPortTable 1 } HwAddingPhyPortToStackPortEntry ::= SEQUENCE { hwEnabledStackModePhyPortIndex Integer32, hwStackPortID INTEGER } hwEnabledStackModePhyPortIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Enabled stack mode's physical name " ::= { hwAddingPhyPortToStackPortEntry 1 } hwStackPortID OBJECT-TYPE SYNTAX INTEGER { port1(1), port2(2), unjoinable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "adding to which stack port 1: added to stack port 1 2: added to stack port 2 3: did not add to any stack port " ::= { hwAddingPhyPortToStackPortEntry 2 } -- -- TABLE: hwStackUpgradeResultTable definition -- hwStackUpgradeResultTable OBJECT-TYPE SYNTAX SEQUENCE OF HwStackUpgradeResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Results of upgrade commands returned from stack member switches." ::= { hwStackObject 31 } hwStackUpgradeResultEntry OBJECT-TYPE SYNTAX HwStackUpgradeResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provides the result of stack switchs upgrade entry. " INDEX { hwStackUpgradeResultIndex, hwStackUpgradeResultMemberId } ::= { hwStackUpgradeResultTable 1 } HwStackUpgradeResultEntry ::= SEQUENCE { hwStackUpgradeResultIndex Integer32, hwStackUpgradeResultMemberId Integer32, hwStackUpgradeResult INTEGER, hwStackUpgradeResultInProcess Integer32, hwStackUpgradeResultFailReason INTEGER } hwStackUpgradeResultIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Specifies the index of an entry. It is a random value when creating an entry." ::= { hwStackUpgradeResultEntry 1 } hwStackUpgradeResultMemberId OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-only STATUS current DESCRIPTION "Identifier of the stack member switch." ::= { hwStackUpgradeResultEntry 2 } hwStackUpgradeResult OBJECT-TYPE SYNTAX INTEGER { success(1), failure(2), running(3), timeout(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Results of upgrade commands returned from stack member switches." ::= { hwStackUpgradeResultEntry 3 } hwStackUpgradeResultInProcess OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The upgrade is in process." ::= { hwStackUpgradeResultEntry 4 } hwStackUpgradeResultFailReason OBJECT-TYPE SYNTAX INTEGER { opUpgradeSuccess(1), opMasterDiskNoSpace(2), opNonmasterDiskNoSpace(3), opInvalidFileInfo(4), opInvalidFileType(5), opInvalidServerAddress(6), opInvalidUserOrPassword(7), opDeviceBusy(8), opFileTransferError(9), opFileChecksumError(10), opNoMemory(11), opCurrentVersionFileConfilt(12), opUpgradeDeviceAbsent(13), opUnknownFailure(14), opUpgradeInvalidValue(15) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of operation. Only upgrade failure valid. The status of the specified operation can be one of the follows. opUpgradeSuccess(1): upgrade success. opMasterDiskNoSpace(2): flash of master device is no enough space. opNonmasterDiskNoSpace(3): flash of non-master device is no enough space. opInvalidFileInfo(4) :invalid source file name or path is specified. opInvalidFileType(5) :invalid file type. opInvalidServerAddress(6) :invalid server address is specified. opInvalidUserOrPassword(7):invalid server user or password. opDeviceBusy(8) :the device is in use and locked by another process opFileTransferError(9) :file transfer was unsuccessfull. opFileChecksumError(10) :file checksum in Flash si invalid. opNoMemory(11) :system is running in low on memory. opCurrentVersionFileConfilt(12) : conflict between target file and system file. opUpgradeDeviceAbsent(13) : device absent. opUnknownFailure(14) :failure which is unknown. opUpgradeInvalidValue(15):invalid value. " ::= { hwStackUpgradeResultEntry 5 } hwStackTrapObject OBJECT IDENTIFIER ::= { hwStackObject 32 } hwStackLocalIfName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Interface name." ::= { hwStackTrapObject 1 } hwStackPeerIfName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The peer interface name." ::= { hwStackTrapObject 2 } hwStackConnectErrReason OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Connection error reason." ::= { hwStackTrapObject 3 } -- -- Node compliance check -- hwStackConformance OBJECT IDENTIFIER ::= { huaweiStackMIB 2 } hwStackGroups OBJECT IDENTIFIER ::= { hwStackConformance 1 } hwStackObjectGroup OBJECT-GROUP OBJECTS {hwStackRun, hwStackTopoType, hwStackMacAddressSwitchTime, hwStackSystemMac, hwStackIsStackDevice,hwStackReservedVlanId, hwStackClearUnsupportCfg,hwMemberCurrentStackId,hwMemberStackPriority, hwMemberStackRole, hwMemberStackMacAddress,hwMemberStackDeviceType, hwMemberConfigStackId, hwMemberStackObjectId, hwStackPortStackId , hwStackPortId , hwStackPortName,hwStackNeighborInfo, hwStackPortStatus, hwStackUpgradeGrpType, hwStackUpgradeGrpValue, hwStackUpgradeFileType, hwStackUpgradeFileInfo, hwStackUpgradeFtpIp, hwStackUpgradeFtpUserName, hwStackUpgradeFtpPassword, hwStackUpgradeServerPort, hwStackUpgradeFileSize, hwStackUpgradeTransmitProtocol,hwStackUpgradeRowStatus, hwStackUpgradeResultMemberId, hwStackUpgradeResult, hwStackUpgradeResultInProcess, hwStackUpgradeResultFailReason} STATUS current DESCRIPTION " Enter the description of the created OBJECT-GROUP." ::= { hwStackGroups 1 } hwStackNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { hwStackLinkUp , hwStackLinkDown ,hwStackStandbyChange, hwStackSwitchOver, hwStackSystemRestart, hwStackStackMemberAdd, hwStackStackMemberLeave, hwStackStackMacChange, hwStackLogicStackPortLinkErr, hwStackPhyStackPortLinkErr, hwPhyStackPortIsDown } STATUS current DESCRIPTION "Enter the description of the created NOTIFICATION-GROUP." ::= { hwStackGroups 2 } hwStackTrapGroup OBJECT-GROUP OBJECTS {hwStackLocalIfName, hwStackPeerIfName} STATUS current DESCRIPTION "Enter the description of the created OBJECT-GROUP." ::= { hwStackGroups 3 } hwStackCompliances OBJECT IDENTIFIER ::= { hwStackConformance 2 } hwBasicCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Enter the description of the created MODULE-COMPLIANCE." MODULE -- this module MANDATORY-GROUPS { hwStackObjectGroup, hwStackNotificationGroup } ::= { hwStackCompliances 1 } hwCssObject OBJECT IDENTIFIER ::= { huaweiStackMIB 3 } hwCssGlobalObject OBJECT IDENTIFIER ::= { hwCssObject 1 } hwCssEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "CSS enable status." ::= { hwCssGlobalObject 1 } hwCssMemberInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwCssMemberInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of CSS member information." ::= { hwCssObject 2 } hwCssMemberInfoEntry OBJECT-TYPE SYNTAX HwCssMemberInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of CSS member information table." INDEX { hwCssMemberFrameId } ::= { hwCssMemberInfoTable 1 } HwCssMemberInfoEntry ::= SEQUENCE { hwCssMemberFrameId Integer32, hwCssMemberConfigFrameId Integer32, hwCssMemberPriority Integer32, hwCssMemberConfigPriority Integer32, hwCssMemberMasterForce EnabledStatus, hwCssMemberConfigMasterForce EnabledStatus, hwCssMemberConfigEnable EnabledStatus, hwCssMemberRole INTEGER } hwCssMemberFrameId OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Frame id for CSS member." ::= { hwCssMemberInfoEntry 1 } hwCssMemberConfigFrameId OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Configured frame id for CSS member." ::= { hwCssMemberInfoEntry 2 } hwCssMemberPriority OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Priority for CSS member." ::= { hwCssMemberInfoEntry 3 } hwCssMemberConfigPriority OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Configured priority for CSS member." ::= { hwCssMemberInfoEntry 4 } hwCssMemberMasterForce OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Force master status for CSS member." ::= { hwCssMemberInfoEntry 5 } hwCssMemberConfigMasterForce OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Configured force master status CSS member." ::= { hwCssMemberInfoEntry 6 } hwCssMemberConfigEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Configured enable status for CSS member." ::= { hwCssMemberInfoEntry 7 } hwCssMemberRole OBJECT-TYPE SYNTAX INTEGER { master(1), backup(2), slave(3), single(4), unknown(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "CSS member's role define." ::= { hwCssMemberInfoEntry 8 } hwCssTrap OBJECT IDENTIFIER ::= { hwCssObject 3 } hwCssTrapObjects OBJECT IDENTIFIER ::= { hwCssTrap 1 } hwCssTrapFrameId1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "CSS trap message frame id parameter." ::= { hwCssTrapObjects 1 } hwCssTrapSlotId1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "CSS trap message slot id parameter." ::= { hwCssTrapObjects 2 } hwCssTrapPortId1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "CSS trap message port id parameter." ::= { hwCssTrapObjects 3 } hwCssTrapFrameId2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "CSS trap message frame id parameter." ::= { hwCssTrapObjects 4 } hwCssTrapSlotId2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "CSS trap message slot id parameter." ::= { hwCssTrapObjects 5 } hwCssTrapPortId2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "CSS trap message port id parameter." ::= { hwCssTrapObjects 6 } hwCssTrapFrameId3 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "CSS trap message frame id parameter." ::= { hwCssTrapObjects 7 } hwCssTrapSlotId3 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "CSS trap message slot id parameter." ::= { hwCssTrapObjects 8 } hwCssTrapPortId3 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "CSS trap message port id parameter." ::= { hwCssTrapObjects 9 } hwCssTraps OBJECT IDENTIFIER ::= { hwCssTrap 2 } hwCssLinkDown NOTIFICATION-TYPE OBJECTS { hwCssTrapFrameId1, hwCssTrapSlotId1, hwCssTrapPortId1 } STATUS current DESCRIPTION "CSS link down trap message." ::= { hwCssTraps 1 } hwCssLinkUp NOTIFICATION-TYPE OBJECTS { hwCssTrapFrameId1, hwCssTrapSlotId1, hwCssTrapPortId1 } STATUS current DESCRIPTION "CSS link up trap message." ::= { hwCssTraps 2 } hwCssSwitchOver NOTIFICATION-TYPE OBJECTS { hwCssTrapFrameId1 } STATUS current DESCRIPTION "CSS switch over trap message." ::= { hwCssTraps 3 } hwCssConnectError NOTIFICATION-TYPE OBJECTS { hwCssTrapFrameId1, hwCssTrapSlotId1, hwCssTrapPortId1, hwCssTrapFrameId2, hwCssTrapSlotId2, hwCssTrapPortId2, hwCssTrapFrameId3, hwCssTrapSlotId3, hwCssTrapPortId3 } STATUS current DESCRIPTION "CSS connect error trap message." ::= { hwCssTraps 4 } hwCssSplit NOTIFICATION-TYPE STATUS current DESCRIPTION "CSS split trap message." ::= { hwCssTraps 5 } hwCssEstablish NOTIFICATION-TYPE STATUS current DESCRIPTION "CSS establish trap message." ::= { hwCssTraps 6 } hwCssFastUpgradeFail NOTIFICATION-TYPE STATUS current DESCRIPTION "CSS fast upgrade fail." ::= { hwCssTraps 7 } hwCssPhyCsuConnectError NOTIFICATION-TYPE OBJECTS {hwStackLocalIfName, hwStackPeerIfName, hwStackConnectErrReason } STATUS current DESCRIPTION "CSS connect error trap message." ::= { hwCssTraps 8 } hwCssConformance OBJECT IDENTIFIER ::= { huaweiStackMIB 4 } hwCssGroups OBJECT IDENTIFIER ::= { hwCssConformance 1 } hwCssObjectGroup OBJECT-GROUP OBJECTS { hwCssMemberFrameId, hwCssMemberConfigFrameId, hwCssMemberPriority, hwCssMemberConfigPriority, hwCssMemberMasterForce, hwCssMemberConfigMasterForce, hwCssMemberConfigEnable, hwCssMemberRole, hwCssEnable } STATUS current DESCRIPTION "CSS mib group: object." ::= { hwCssGroups 1 } hwCssTrapObjectGroup OBJECT-GROUP OBJECTS { hwCssTrapFrameId2, hwCssTrapSlotId2, hwCssTrapPortId2, hwCssTrapFrameId3, hwCssTrapSlotId3, hwCssTrapPortId3, hwCssTrapFrameId1, hwCssTrapSlotId1, hwCssTrapPortId1 } STATUS current DESCRIPTION "CSS mib group: trap." ::= { hwCssGroups 2 } hwCssNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { hwCssLinkDown, hwCssLinkUp, hwCssSwitchOver, hwCssConnectError, hwCssSplit, hwCssEstablish, hwCssFastUpgradeFail, hwCssPhyCsuConnectError } STATUS current DESCRIPTION "CSS mib group: notification." ::= { hwCssGroups 3 } hwCssCompliances OBJECT IDENTIFIER ::= { hwCssConformance 2 } hwCssCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "CSS mib compliance." ::= { hwCssCompliances 1 } END -- -- HUAWEI-STACK-MIB.mib --