-- ================================================================= -- Copyright (C) 2007 by HUAWEI TECHNOLOGIES. All rights reserved. -- -- Description: HUAWEI Private IMA Interface MIB -- Version: V1.0 -- History: -- V1.0 -- ================================================================== -- ================================================================== -- -- Variables and types be imported -- -- ================================================================== HUAWEI-IMA-MIB DEFINITIONS ::= BEGIN IMPORTS hwDatacomm FROM HUAWEI-MIB NOTIFICATION-TYPE, enterprises, MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Gauge32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, DateAndTime, RowStatus FROM SNMPv2-TC InterfaceIndex, InterfaceIndexOrZero, ifIndex FROM IF-MIB; -- February 10,2009 at 14:00 GMT -- February 10,2009 at 14:00 GMT hwImaMIB MODULE-IDENTITY LAST-UPDATED "200902101400Z" -- February 10,2009 at 14:00 GMT ORGANIZATION "Huawei Technologies co.,Ltd." CONTACT-INFO "Huawei Technologies co.,Ltd. Huawei Bld.,NO.3 Xinxi Rd., Shang-Di Information Industry Base, Hai-Dian District Beijing P.R. China http://www.huawei.com Zip:100085 " DESCRIPTION "The MIB is mainly used to configure Inverse Multiplexing for ATM (IMA) interfaces." ::= { hwDatacomm 176 } -- The object identifier subtree for the HUAWEI-IMA-MIB. hwImaMibObjects OBJECT IDENTIFIER ::= { hwImaMIB 1 } hwImaMibConformance OBJECT IDENTIFIER ::= { hwImaMIB 2 } hwImaNotifications OBJECT IDENTIFIER ::= { hwImaMIB 3 } -- Textual conventions MilliSeconds ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Time in milliseconds" SYNTAX Integer32 ImaGroupState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "State of the IMA group." SYNTAX INTEGER { notConfigured(1), startUp(2), startUpAck(3), configAbortUnsupportedM(4), configAbortIncompatibleSymmetry(5), configAbortOther(6), insufficientLinks(7), blocked(8), operational(9), configAbortUnsupportedImaVersion(10) } ImaGroupSymmetry ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The group symmetry mode adjusted during the group start-up." SYNTAX INTEGER { symmetricOperation(1), asymmetricOperation(2), asymmetricConfiguration(3) } ImaFrameLength ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Length of the IMA frames." SYNTAX INTEGER { m32(1), m64(2), m128(3), m256(4) } ImaLinkState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "State of a link belonging to an IMA group." SYNTAX INTEGER { notInGroup(1), unusableNoGivenReason(2), unusableFault(3), unusableMisconnected(4), unusableInhibited(5), unusableFailed(6), usable(7), active(8) } -- -- The IMA Group subtree -- -- The IMA Group subtree consists of the number of IMA groups and a -- table of IMA groups. Each entry in the table of IMA groups contains -- information (configuration and status) specific to each group. -- hwImaGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF HWImaGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IMA Group Configuration table." ::= { hwImaMibObjects 1 } hwImaGroupEntry OBJECT-TYPE SYNTAX HWImaGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the IMA Group table." INDEX { hwImaGroupIfIndex } ::= { hwImaGroupTable 1 } HWImaGroupEntry ::= SEQUENCE { hwImaGroupIfIndex InterfaceIndex, hwImaGroupNeState ImaGroupState, hwImaGroupFeState ImaGroupState, hwImaGroupSymmetry ImaGroupSymmetry, hwImaGroupMinNumTxLinks Integer32 (1..32), hwImaGroupMinNumRxLinks Integer32 (1..32), hwImaGroupTxTimingRefLink InterfaceIndexOrZero, hwImaGroupRxTimingRefLink InterfaceIndexOrZero, hwImaGroupTxImaId Integer32 (0..255), hwImaGroupRxImaId Integer32 (0..255), hwImaGroupTxFrameLength ImaFrameLength, hwImaGroupRxFrameLength ImaFrameLength, hwImaGroupDiffDelayMax MilliSeconds, hwImaGroupAlphaValue Integer32 (1..2), hwImaGroupBetaValue Integer32 (1..5), hwImaGroupGammaValue Integer32 (1..5), hwImaGroupNumTxActLinks Gauge32, hwImaGroupNumRxActLinks Gauge32, hwImaGroupTxOamLabelValue Integer32 (1..255), hwImaGroupRxOamLabelValue Integer32 (0..255), hwImaGroupFirstLinkIfIndex InterfaceIndex, hwImaGroupName OCTET STRING } hwImaGroupIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the logical interface number ('ifIndex') assigned to this IMA group, and is used to identify corresponding rows in the Interfaces MIB. Note that re-initialization of the management agent may cause a client's 'hwImaGroupIfIndex' to change." ::= { hwImaGroupEntry 1 } hwImaGroupNeState OBJECT-TYPE SYNTAX ImaGroupState MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the near-end IMA Group State Machine." ::= { hwImaGroupEntry 2 } hwImaGroupFeState OBJECT-TYPE SYNTAX ImaGroupState MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the far-end IMA Group State Machine." ::= { hwImaGroupEntry 3 } hwImaGroupSymmetry OBJECT-TYPE SYNTAX ImaGroupSymmetry MAX-ACCESS read-only STATUS current DESCRIPTION "Symmetry of the IMA group." ::= { hwImaGroupEntry 4 } hwImaGroupMinNumTxLinks OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum number of transmit links required to be Active for the IMA group to be in the Operational state." ::= { hwImaGroupEntry 5 } hwImaGroupMinNumRxLinks OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum number of receive links required to be Active for the IMA group to be in the Operational state." ::= { hwImaGroupEntry 6 } hwImaGroupTxTimingRefLink OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex of the transmit timing reference link to be used by the near-end for IMA data cell clock recovery from the ATM layer. The distinguished value of zero may be used if no link has been configured in the IMA group, or if the transmit timing reference link has not yet been selected." ::= { hwImaGroupEntry 7 } hwImaGroupRxTimingRefLink OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex of the receive timing reference link to be used by near-end for IMA data cell clock recovery toward the ATM layer. The distinguished value of zero may be used if no link has been configured in the IMA group, or if the receive timing reference link has not yet been detected." ::= { hwImaGroupEntry 8 } hwImaGroupTxImaId OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The IMA ID currently in use by the near-end IMA function." ::= { hwImaGroupEntry 9 } hwImaGroupRxImaId OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The IMA ID currently in use by the far-end IMA function." ::= { hwImaGroupEntry 10 } hwImaGroupTxFrameLength OBJECT-TYPE SYNTAX ImaFrameLength MAX-ACCESS read-create STATUS current DESCRIPTION "The frame length to be used by the IMA group in the transmit direction. Can only be set when the IMA group is startup." ::= { hwImaGroupEntry 11 } hwImaGroupRxFrameLength OBJECT-TYPE SYNTAX ImaFrameLength MAX-ACCESS read-only STATUS current DESCRIPTION "Value of IMA frame length as received from remote IMA function." ::= { hwImaGroupEntry 12 } hwImaGroupDiffDelayMax OBJECT-TYPE SYNTAX MilliSeconds (25..120) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of milliseconds of differential delay among the links that will be tolerated on this interface." ::= { hwImaGroupEntry 13 } hwImaGroupAlphaValue OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the 'alpha' value used to specify the number of consecutive invalid ICP cells to be detected before moving to the IMA Hunt state from the IMA Sync state." ::= { hwImaGroupEntry 14 } hwImaGroupBetaValue OBJECT-TYPE SYNTAX Integer32 (1..5) MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the 'beta' value used to specify the number of consecutive errored ICP cells to be detected before moving to the IMA Hunt state from the IMA Sync state." ::= { hwImaGroupEntry 15 } hwImaGroupGammaValue OBJECT-TYPE SYNTAX Integer32 (1..5) MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the 'gamma' value used to specify the number of consecutive valid ICP cells to be detected before moving to the IMA Sync state from the IMA PreSync state." ::= { hwImaGroupEntry 16 } -- hwImaGroupNumTxActLinks is used by a network operator to tell how many -- links which are configured for transmit are also Active. hwImaGroupNumTxActLinks OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of links which are configured to transmit and are currently Active in this IMA group." ::= { hwImaGroupEntry 17 } -- hwImaGroupNumRxActLinks is used by a network operator to tell how many -- links which are configured for receive are also Active. hwImaGroupNumRxActLinks OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of links which are configured to receive and are currently Active in this IMA group." ::= { hwImaGroupEntry 18 } -- -- Objects to report the IMA OAM Label values transmitted and -- received by the IMA group. -- hwImaGroupTxOamLabelValue OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "IMA OAM Label value transmitted by the NE IMA unit." ::= { hwImaGroupEntry 19 } hwImaGroupRxOamLabelValue OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "IMA OAM Label value transmitted by the FE IMA unit. The value 0 likely means that the IMA unit has not received an OAM Label from the FE IMA unit at this time." ::= { hwImaGroupEntry 20 } hwImaGroupFirstLinkIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the first link of this IMA Group." ::= { hwImaGroupEntry 21 } -- 1.3.6.1.4.1.2011.5.25.176.1.1.1.22 hwImaGroupName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The name of interface ImaGroup." ::= { hwImaGroupEntry 22 } -- -- The IMA Link subtree -- -- The IMA Link subtree consists of a table of IMA links. Each entry -- in the table contains status information about a link which is part -- of an IMA group, and also contains a configuration object to select -- to which IMA group the link belongs. -- hwImaLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF HWImaLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IMA group Link Status and Configuration table." ::= { hwImaMibObjects 2 } hwImaLinkEntry OBJECT-TYPE SYNTAX HWImaLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the IMA Group Link table." INDEX { hwImaLinkIfIndex } ::= { hwImaLinkTable 1 } HWImaLinkEntry ::= SEQUENCE { hwImaLinkIfIndex InterfaceIndex, hwImaLinkGroupIfIndex InterfaceIndex, hwImaLinkNeTxState ImaLinkState, hwImaLinkNeRxState ImaLinkState, hwImaLinkFeTxState ImaLinkState, hwImaLinkFeRxState ImaLinkState, hwImaLinkRowStatus RowStatus, hwImaLinkName OCTET STRING } hwImaLinkIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This corresponds to the 'ifIndex' of the MIB-II interface on which this link is established. This object also corresponds to the logical number ('ifIndex') assigned to this IMA link." ::= { hwImaLinkEntry 1 } hwImaLinkGroupIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the logical interface number ('ifIndex') assigned to this IMA group. The specified link will be bound to this IMA group." ::= { hwImaLinkEntry 2 } hwImaLinkNeTxState OBJECT-TYPE SYNTAX ImaLinkState MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the near-end transmit link." ::= { hwImaLinkEntry 3 } hwImaLinkNeRxState OBJECT-TYPE SYNTAX ImaLinkState MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the near-end receive link." ::= { hwImaLinkEntry 4 } hwImaLinkFeTxState OBJECT-TYPE SYNTAX ImaLinkState MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the far-end transmit link as reported via ICP cells." ::= { hwImaLinkEntry 5 } hwImaLinkFeRxState OBJECT-TYPE SYNTAX ImaLinkState MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the far-end receive link as reported via ICP cells." ::= { hwImaLinkEntry 6 } hwImaLinkRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The hwImaLinkRowStatus object allows create, change, and delete operations on hwImaLinkTable entries. To create a new conceptual row (or instance) of the hwImaLinkTable, hwImaLinkRowStatus must be set to 'createAndWait' or 'createAndGo'. A successful set of the imaLinkGroupIndex object must be performed before the hwImaLinkRowStatus of a new conceptual row can be set to 'active'. To change (modify) the imaLinkGroupIndex in an hwImaLinkTable entry, the hwImaLinkRowStatus object must first be set to 'notInService'. Only then can this object in the conceptual row be modified. This is due to the fact that the imaLinkGroupIndex object provides the association between a physical IMA link and the IMA group to which it belongs, and setting the imaLinkGroupIndex object to a different value has the effect of changing the association between a physical IMA link and an IMA group. To place the link 'in group', the hwImaLinkRowStatus object is set to 'active'. While the row is not in 'active' state, both the Transmit and Receive IMA link state machines are in the 'Not In Group' state. To remove (delete) an hwImaLinkTable entry from this table, set this object to 'destroy'." ::= { hwImaLinkEntry 51 } -- 1.3.6.1.4.1.2011.5.25.176.1.2.1.52 hwImaLinkName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Description." ::= { hwImaLinkEntry 52 } -- 1.3.6.1.4.1.2011.5.25.176.1.3 hwImaAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF HwImaAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { hwImaMibObjects 3 } -- 1.3.6.1.4.1.2011.5.25.176.1.3.1 hwImaAlarmEntry OBJECT-TYPE SYNTAX HwImaAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { hwImaAlarmIfIndex } ::= { hwImaAlarmTable 1 } HwImaAlarmEntry ::= SEQUENCE { hwImaAlarmIfIndex Integer32, hwImaGroupNeDownEn Integer32, hwImaGroupFeDownEn Integer32, hwImaGroupTxClkMismatchEn Integer32, hwImaLinkLifEn Integer32, hwImaLinkLodsEn Integer32, hwImaLinkRfiEn Integer32, hwImaLinkFeTxUnusableEn Integer32, hwImaLinkFeRxUnusableEn Integer32, hwIMAAllEn Integer32 } -- 1.3.6.1.4.1.2011.5.25.176.1.3.1.1 hwImaAlarmIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { hwImaAlarmEntry 1 } -- 1.3.6.1.4.1.2011.5.25.176.1.3.1.2 hwImaGroupNeDownEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { hwImaAlarmEntry 2 } -- 1.3.6.1.4.1.2011.5.25.176.1.3.1.3 hwImaGroupFeDownEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { hwImaAlarmEntry 3 } -- 1.3.6.1.4.1.2011.5.25.176.1.3.1.4 hwImaGroupTxClkMismatchEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { hwImaAlarmEntry 4 } -- 1.3.6.1.4.1.2011.5.25.176.1.3.1.5 hwImaLinkLifEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { hwImaAlarmEntry 5 } -- 1.3.6.1.4.1.2011.5.25.176.1.3.1.6 hwImaLinkLodsEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { hwImaAlarmEntry 6 } -- 1.3.6.1.4.1.2011.5.25.176.1.3.1.7 hwImaLinkRfiEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { hwImaAlarmEntry 7 } -- 1.3.6.1.4.1.2011.5.25.176.1.3.1.8 hwImaLinkFeTxUnusableEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { hwImaAlarmEntry 8 } -- 1.3.6.1.4.1.2011.5.25.176.1.3.1.9 hwImaLinkFeRxUnusableEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { hwImaAlarmEntry 9 } -- 1.3.6.1.4.1.2011.5.25.176.1.3.1.10 hwIMAAllEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { hwImaAlarmEntry 10 } -- Conformance Information hwImaMibGroups OBJECT IDENTIFIER ::= { hwImaMibConformance 1 } hwImaMibCompliances OBJECT IDENTIFIER ::= { hwImaMibConformance 2 } -- Compliance Statements hwImaMibCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for network elements implementing Inverse Multiplexing for ATM (IMA) interfaces." MODULE -- this module -- Mandatory Part MANDATORY-GROUPS { hwImaGroupGroup, hwImaLinkGroup } -- Compliance Part OBJECT hwImaGroupMinNumTxLinks MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT hwImaGroupMinNumRxLinks MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT hwImaGroupTxFrameLength MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT hwImaGroupDiffDelayMax MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { hwImaMibCompliances 1 } -- Units of Conformance hwImaGroupGroup OBJECT-GROUP OBJECTS { hwImaGroupIfIndex, hwImaGroupNeState, hwImaGroupFeState, hwImaGroupSymmetry, hwImaGroupMinNumTxLinks, hwImaGroupMinNumRxLinks, hwImaGroupTxTimingRefLink, hwImaGroupRxTimingRefLink, hwImaGroupTxImaId, hwImaGroupRxImaId, hwImaGroupTxFrameLength, hwImaGroupRxFrameLength, hwImaGroupDiffDelayMax, hwImaGroupAlphaValue, hwImaGroupBetaValue, hwImaGroupGammaValue, hwImaGroupNumTxActLinks, hwImaGroupNumRxActLinks, hwImaGroupTxOamLabelValue, hwImaGroupRxOamLabelValue, hwImaGroupFirstLinkIfIndex } STATUS current DESCRIPTION "A set of objects providing configuration and status information for an IMA group definition." ::= { hwImaMibGroups 1 } hwImaLinkGroup OBJECT-GROUP OBJECTS { hwImaLinkGroupIfIndex, hwImaLinkNeTxState, hwImaLinkNeRxState, hwImaLinkFeTxState, hwImaLinkFeRxState, hwImaLinkRowStatus } STATUS current DESCRIPTION "A set of objects providing status information for an IMA link." ::= { hwImaMibGroups 2 } -- 1.3.6.1.4.1.2011.5.25.176.3.1 hwImaGroupNeDownAlarm NOTIFICATION-TYPE OBJECTS { hwImaGroupName } STATUS current DESCRIPTION "Description." ::= { hwImaNotifications 1 } -- 1.3.6.1.4.1.2011.5.25.176.3.2 hwImaGroupNeDownAlarmResume NOTIFICATION-TYPE OBJECTS { hwImaGroupName } STATUS current DESCRIPTION "Description." ::= { hwImaNotifications 2 } -- 1.3.6.1.4.1.2011.5.25.176.3.3 hwImaGroupFeDownAlarm NOTIFICATION-TYPE OBJECTS { hwImaGroupName } STATUS current DESCRIPTION "Description." ::= { hwImaNotifications 3 } -- 1.3.6.1.4.1.2011.5.25.176.3.4 hwImaGroupFeDownAlarmResume NOTIFICATION-TYPE OBJECTS { hwImaGroupName } STATUS current DESCRIPTION "Description." ::= { hwImaNotifications 4 } -- 1.3.6.1.4.1.2011.5.25.176.3.5 hwImaGroupTxClkMismatch NOTIFICATION-TYPE OBJECTS { hwImaGroupName } STATUS current DESCRIPTION "Description." ::= { hwImaNotifications 5 } -- 1.3.6.1.4.1.2011.5.25.176.3.6 hwImaGroupTxClkMismatchResume NOTIFICATION-TYPE OBJECTS { hwImaGroupName } STATUS current DESCRIPTION "Description." ::= { hwImaNotifications 6 } -- 1.3.6.1.4.1.2011.5.25.176.3.7 hwImaLinkLifAlarm NOTIFICATION-TYPE OBJECTS { hwImaLinkName } STATUS current DESCRIPTION "Description." ::= { hwImaNotifications 7 } -- 1.3.6.1.4.1.2011.5.25.176.3.8 hwImaLinkLifAlarmResume NOTIFICATION-TYPE OBJECTS { hwImaLinkName } STATUS current DESCRIPTION "Description." ::= { hwImaNotifications 8 } -- 1.3.6.1.4.1.2011.5.25.176.3.9 hwImaLinkLodsAlarm NOTIFICATION-TYPE OBJECTS { hwImaLinkName } STATUS current DESCRIPTION "Description." ::= { hwImaNotifications 9 } -- 1.3.6.1.4.1.2011.5.25.176.3.10 hwImaLinkLodsAlarmResume NOTIFICATION-TYPE OBJECTS { hwImaLinkName } STATUS current DESCRIPTION "Description." ::= { hwImaNotifications 10 } -- 1.3.6.1.4.1.2011.5.25.176.3.11 hwImaLinkRfiAlarm NOTIFICATION-TYPE OBJECTS { hwImaLinkName } STATUS current DESCRIPTION "Description." ::= { hwImaNotifications 11 } -- 1.3.6.1.4.1.2011.5.25.176.3.12 hwImaLinkRfiAlarmResume NOTIFICATION-TYPE OBJECTS { hwImaLinkName } STATUS current DESCRIPTION "Description." ::= { hwImaNotifications 12 } -- 1.3.6.1.4.1.2011.5.25.176.3.13 hwImaLinkFeTxUnusableAlarm NOTIFICATION-TYPE OBJECTS { hwImaLinkName } STATUS current DESCRIPTION "Description." ::= { hwImaNotifications 13 } -- 1.3.6.1.4.1.2011.5.25.176.3.14 hwImaLinkFeTxUnusableAlarmResume NOTIFICATION-TYPE OBJECTS { hwImaLinkName } STATUS current DESCRIPTION "Description." ::= { hwImaNotifications 14 } -- 1.3.6.1.4.1.2011.5.25.176.3.15 hwImaLinkFeRxUnusableAlarm NOTIFICATION-TYPE OBJECTS { hwImaLinkName } STATUS current DESCRIPTION "Description." ::= { hwImaNotifications 15 } -- 1.3.6.1.4.1.2011.5.25.176.3.16 hwImaLinkFeRxUnusableAlarmResume NOTIFICATION-TYPE OBJECTS { hwImaLinkName } STATUS current DESCRIPTION "Description." ::= { hwImaNotifications 16 } END -- -- HUAWEI-IMA-MIB.mib --