-- ================================================================= -- Copyright (C) 2007 by HUAWEI TECHNOLOGIES. All rights reserved -- -- Description the HUAWEI-RSVPTE-MIB provides information about RSVPTE. -- Reference: -- Version: V1.0 -- History: -- zhuguangdong 2007-04-16 publish -- ================================================================= -- HUAWEI-RSVPTE-MIB DEFINITIONS ::= BEGIN IMPORTS hwDatacomm FROM HUAWEI-MIB ifIndex FROM IF-MIB SessionType, BitRate, BurstSize, MessageSize, QosService FROM INTEGRATED-SERVICES-MIB OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF IpAddress, Integer32, Gauge32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI TruthValue, TimeStamp, RowStatus, TimeInterval FROM SNMPv2-TC; -- Thu Apri 16 15:03:53 PDT 2007 hwRsvpTe MODULE-IDENTITY LAST-UPDATED "200704101000Z" -- April 10, 2007 at 10:00 GMT ORGANIZATION "Huawei Technologies Co.,Ltd." CONTACT-INFO "R&D BeiJing, Huawei Technologies co.,Ltd. Huawei Bld.,NO.3 Xinxi Rd., Shang-Di Information Industry Base, Hai-Dian District Beijing P.R. China Zip:100085 Http://www.huawei.com E-mail:support@huawei.com " DESCRIPTION "The MIB module to describe the RSVP Protocol" ::= { hwDatacomm 148 } -- -- Node definitions -- hwRsvpTeObjects OBJECT IDENTIFIER ::= { hwRsvpTe 1 } -- The RSVP Session Statistics Database displays statistics -- relating to the number of senders and receivers in each -- session. hwRsvpTeSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF HwRsvpTeSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of all sessions seen by a given sys- tem." ::= { hwRsvpTeObjects 1 } hwRsvpTeSessionEntry OBJECT-TYPE SYNTAX HwRsvpTeSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single session seen by a given system." INDEX { hwRsvpTeSessionNumber } ::= { hwRsvpTeSessionTable 1 } HwRsvpTeSessionEntry ::= SEQUENCE { hwRsvpTeSessionNumber Gauge32, hwRsvpTeSessionType SessionType, hwRsvpTeSessionDestAddr OCTET STRING, hwRsvpTeSessionDestAddrLength Integer32, hwRsvpTeSessionSenders Gauge32, hwRsvpTeSessionReceivers Gauge32, hwRsvpTeSessionRequests Gauge32, hwRsvpTeSessionTunnelId Integer32, hwRsvpTeSessionTunnelExtId IpAddress, hwRsvpTeSessionLspsNumber Gauge32, hwRsvpTeSessionStyle INTEGER } hwRsvpTeSessionNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The number of this session. This is for SNMP Indexing purposes only and has no relation to any protocol value." ::= { hwRsvpTeSessionEntry 1 } hwRsvpTeSessionType OBJECT-TYPE SYNTAX SessionType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of session (IP4, IP6, IP6 with flow information, etc)." ::= { hwRsvpTeSessionEntry 2 } hwRsvpTeSessionDestAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address used by all senders in this session." ::= { hwRsvpTeSessionEntry 3 } hwRsvpTeSessionDestAddrLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The CIDR prefix length of the session address, which is 32 for IP4 host and multicast ad- dresses, and 128 for IP6 addresses." ::= { hwRsvpTeSessionEntry 4 } hwRsvpTeSessionSenders OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of distinct senders currently known to be part of this session." ::= { hwRsvpTeSessionEntry 5 } hwRsvpTeSessionReceivers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of reservations being requested of this system for this session." ::= { hwRsvpTeSessionEntry 6 } hwRsvpTeSessionRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of reservation requests this system is sending upstream for this session." ::= { hwRsvpTeSessionEntry 7 } hwRsvpTeSessionTunnelId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A 16-bit identifier used in the SESSION that remains constant over the life of the tunnel." ::= { hwRsvpTeSessionEntry 8 } hwRsvpTeSessionTunnelExtId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "An identifier used in the SESSION that remains constant over the life of the tunnel. Normally the identifier is set to all zeros. Ingress nodes that wish to narrow the scope of a SESSION to the ingress-egress pair may place their IPv4 address here as a globally unique identifier. " ::= { hwRsvpTeSessionEntry 9 } hwRsvpTeSessionLspsNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LSPs that belong to this session." ::= { hwRsvpTeSessionEntry 10 } hwRsvpTeSessionStyle OBJECT-TYPE SYNTAX INTEGER { ff(10), wf(17), se(18) } MAX-ACCESS read-only STATUS current DESCRIPTION "An enumerable value to identify the treatment of reservations for different senders within the same session: WF 10001b, FF01010b, SE 10010b." ::= { hwRsvpTeSessionEntry 11 } hwRsvpTeSenderTable OBJECT-TYPE SYNTAX SEQUENCE OF HwRsvpTeSenderEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing the state information displayed by senders in PATH messages." ::= { hwRsvpTeObjects 2 } hwRsvpTeSenderEntry OBJECT-TYPE SYNTAX HwRsvpTeSenderEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing the state information displayed by a single sender's PATH message." INDEX { hwRsvpTeSessionNumber, hwRsvpTeSenderNumber } ::= { hwRsvpTeSenderTable 1 } HwRsvpTeSenderEntry ::= SEQUENCE { hwRsvpTeSenderNumber Gauge32, hwRsvpTeSenderType SessionType, hwRsvpTeSenderDestAddr OCTET STRING, hwRsvpTeSenderAddr OCTET STRING, hwRsvpTeSenderDestAddrLength Integer32, hwRsvpTeSenderAddrLength Integer32, hwRsvpTeSenderHopAddr OCTET STRING, hwRsvpTeSenderHopLih Integer32, hwRsvpTeSenderInterface Integer32, hwRsvpTeSenderTSpecRate BitRate, hwRsvpTeSenderTSpecPeakRate BitRate, hwRsvpTeSenderTSpecBurst BurstSize, hwRsvpTeSenderTSpecMinTu MessageSize, hwRsvpTeSenderTSpecMaxTu MessageSize, hwRsvpTeSenderInterval Integer32, hwRsvpTeSenderRsvpHop TruthValue, hwRsvpTeSenderPolicy OCTET STRING, hwRsvpTeSenderAdspecBreak TruthValue, hwRsvpTeSenderAdspecHopCount Integer32, hwRsvpTeSenderAdspecPathBw BitRate, hwRsvpTeSenderAdspecMinLatency Integer32, hwRsvpTeSenderAdspecMtu Integer32, hwRsvpTeSenderAdspecGuaranteedSvc TruthValue, hwRsvpTeSenderAdspecGuaranteedBreak TruthValue, hwRsvpTeSenderAdspecGuaranteedCtot Integer32, hwRsvpTeSenderAdspecGuaranteedDtot Integer32, hwRsvpTeSenderAdspecGuaranteedCsum Integer32, hwRsvpTeSenderAdspecGuaranteedDsum Integer32, hwRsvpTeSenderAdspecGuaranteedHopCount Integer32, hwRsvpTeSenderAdspecGuaranteedPathBw BitRate, hwRsvpTeSenderAdspecGuaranteedMinLatency Integer32, hwRsvpTeSenderAdspecGuaranteedMtu Integer32, hwRsvpTeSenderAdspecCtrlLoadSvc TruthValue, hwRsvpTeSenderAdspecCtrlLoadBreak TruthValue, hwRsvpTeSenderAdspecCtrlLoadHopCount Integer32, hwRsvpTeSenderAdspecCtrlLoadPathBw BitRate, hwRsvpTeSenderAdspecCtrlLoadMinLatency Integer32, hwRsvpTeSenderAdspecCtrlLoadMtu Integer32, hwRsvpTeSenderTtl Integer32, hwRsvpTeLspId Integer32, hwRsvpTeSenderMsgIdSndFlag Integer32, hwRsvpTeSenderMsgIdSndEpoch Gauge32, hwRsvpTeSenderMsgIdSndNumber Gauge32, hwRsvpTeSenderMsgIdRcvFlag Integer32, hwRsvpTeSenderMsgIdRcvEpoch Gauge32, hwRsvpTeSenderMsgIdRcvNumber Gauge32, hwRsvpTeSenderClassType Integer32, hwRsvpTeSenderLabelRequestCtype INTEGER, hwRsvpTeSenderLabelRequestL3pid Integer32, hwRsvpTeSenderLabelRequestAtmMinVpi Integer32, hwRsvpTeSenderLabelRequestAtmMinVci Integer32, hwRsvpTeSenderLabelRequestAtmMaxVpi Integer32, hwRsvpTeSenderLabelRequestAtmMaxVci Integer32, hwRsvpTeSenderLabelRequestFrMinDlci Integer32, hwRsvpTeSenderLabelRequestFrMaxDlci Integer32, hwRsvpTeSenderSessionAttrType INTEGER, hwRsvpTeSenderSessionAttrSetupPrio Integer32, hwRsvpTeSenderSessionAttrHoldPrio Integer32, hwRsvpTeSenderSessionAttrFlag Integer32, hwRsvpTeSenderSessionAttrName OCTET STRING, hwRsvpTeSenderSessionAttrExcludeAny Gauge32, hwRsvpTeSenderSessionAttrIncludeAny Gauge32, hwRsvpTeSenderSessionAttrIncludeAll Gauge32, hwRsvpTeSenderFrrSetupPrio Integer32, hwRsvpTeSenderFrrHoldPrio Integer32, hwRsvpTeSenderFrrHopLimit Integer32, hwRsvpTeSenderFrrFlag INTEGER, hwRsvpTeSenderFrrBandwidth BitRate, hwRsvpTeSenderFrrExcludeAny Gauge32, hwRsvpTeSenderFrrIncludeAny Gauge32, hwRsvpTeSenderFrrIncludeAll Gauge32, hwRsvpTeSenderFrrInuseFlag INTEGER, hwRsvpTeSenderDiffServPsc Integer32 } hwRsvpTeSenderNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The number of this sender. This is for SNMP Indexing purposes only and has no relation to any protocol value." ::= { hwRsvpTeSenderEntry 1 } hwRsvpTeSenderType OBJECT-TYPE SYNTAX SessionType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of session (IP4, IP6, IP6 with flow information, etc)." ::= { hwRsvpTeSenderEntry 2 } hwRsvpTeSenderDestAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address used by all senders in this session." ::= { hwRsvpTeSenderEntry 3 } hwRsvpTeSenderAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The source address used by this sender in this session." ::= { hwRsvpTeSenderEntry 4 } hwRsvpTeSenderDestAddrLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The length of the destination address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits." ::= { hwRsvpTeSenderEntry 5 } hwRsvpTeSenderAddrLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The length of the sender's address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits." ::= { hwRsvpTeSenderEntry 6 } hwRsvpTeSenderHopAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The address used by the previous RSVP hop (which may be the original sender)." ::= { hwRsvpTeSenderEntry 7 } hwRsvpTeSenderHopLih OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Logical Interface Handle used by the pre- vious RSVP hop (which may be the original sender)." ::= { hwRsvpTeSenderEntry 8 } hwRsvpTeSenderInterface OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex value of the interface on which this PATH message was most recently received." ::= { hwRsvpTeSenderEntry 9 } hwRsvpTeSenderTSpecRate OBJECT-TYPE SYNTAX BitRate UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The Average Bit Rate of the sender's data stream. Within a transmission burst, the ar- rival rate may be as fast as hwRsvpTeSenderTSpec- PeakRate (if supported by the service model); however, averaged across two or more burst in- tervals, the rate should not exceed hwRsvpTeSen- derTSpecRate. Note that this is a prediction, often based on the general capability of a type of codec or particular encoding; the measured average rate may be significantly lower." ::= { hwRsvpTeSenderEntry 10 } hwRsvpTeSenderTSpecPeakRate OBJECT-TYPE SYNTAX BitRate UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The Peak Bit Rate of the sender's data stream. Traffic arrival is not expected to exceed this rate at any time, apart from the effects of jitter in the network. If not specified in the TSpec, this returns zero or noSuchValue." ::= { hwRsvpTeSenderEntry 11 } hwRsvpTeSenderTSpecBurst OBJECT-TYPE SYNTAX BurstSize UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the largest burst expected from the sender at a time." ::= { hwRsvpTeSenderEntry 12 } hwRsvpTeSenderTSpecMinTu OBJECT-TYPE SYNTAX MessageSize MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum message size for this flow. The policing algorithm will treat smaller messages as though they are this size." ::= { hwRsvpTeSenderEntry 13 } hwRsvpTeSenderTSpecMaxTu OBJECT-TYPE SYNTAX MessageSize MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum message size for this flow. The admission algorithm will reject TSpecs whose Maximum Transmission Unit, plus the interface headers, exceed the interface MTU." ::= { hwRsvpTeSenderEntry 14 } hwRsvpTeSenderInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interval between refresh messages as ad- vertised by the previous hop." ::= { hwRsvpTeSenderEntry 15 } hwRsvpTeSenderRsvpHop OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If TRUE, the node believes that the previous IP hop is an RSVP hop. If FALSE, the node be- lieves that the previous IP hop may not be an RSVP hop." ::= { hwRsvpTeSenderEntry 16 } hwRsvpTeSenderPolicy OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..65532)) MAX-ACCESS read-only STATUS current DESCRIPTION "The contents of the policy object, displayed as an uninterpreted string of octets, including the object header. In the absence of such an object, this should be of zero length." ::= { hwRsvpTeSenderEntry 17 } hwRsvpTeSenderAdspecBreak OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The global break bit general characterization parameter from the ADSPEC. If TRUE, at least one non-IS hop was detected in the path. If FALSE, no non-IS hops were detected." ::= { hwRsvpTeSenderEntry 18 } hwRsvpTeSenderAdspecHopCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The hop count general characterization parame- ter from the ADSPEC. A return of zero or noSuchValue indicates one of the following con- ditions: the invalid bit was set the parameter was not present" ::= { hwRsvpTeSenderEntry 19 } hwRsvpTeSenderAdspecPathBw OBJECT-TYPE SYNTAX BitRate UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The path bandwidth estimate general character- ization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the fol- lowing conditions: the invalid bit was set the parameter was not present" ::= { hwRsvpTeSenderEntry 20 } hwRsvpTeSenderAdspecMinLatency OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum path latency general characteriza- tion parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the fol- lowing conditions: the invalid bit was set the parameter was not present" ::= { hwRsvpTeSenderEntry 21 } hwRsvpTeSenderAdspecMtu OBJECT-TYPE SYNTAX Integer32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The composed Maximum Transmission Unit general characterization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set the parameter was not present" ::= { hwRsvpTeSenderEntry 22 } hwRsvpTeSenderAdspecGuaranteedSvc OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If TRUE, the ADSPEC contains a Guaranteed Ser- vice fragment. If FALSE, the ADSPEC does not contain a Guaranteed Service fragment." ::= { hwRsvpTeSenderEntry 23 } hwRsvpTeSenderAdspecGuaranteedBreak OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If TRUE, the Guaranteed Service fragment has its 'break' bit set, indicating that one or more nodes along the path do not support the guaranteed service. If FALSE, and hwRsvpTe- SenderAdspecGuaranteedSvc is TRUE, the 'break' bit is not set. If hwRsvpTeSenderAdspecGuaranteedSvc is FALSE, this returns FALSE or noSuchValue." ::= { hwRsvpTeSenderEntry 24 } hwRsvpTeSenderAdspecGuaranteedCtot OBJECT-TYPE SYNTAX Integer32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this is the end-to-end composed value for the guaranteed service 'C' parameter. A return of zero or noSuchValue indicates one of the fol- lowing conditions: the invalid bit was set the parameter was not present If hwRsvpTeSenderAdspecGuaranteedSvc is FALSE, this returns zero or noSuchValue." ::= { hwRsvpTeSenderEntry 25 } hwRsvpTeSenderAdspecGuaranteedDtot OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this is the end-to-end composed value for the guaranteed service 'D' parameter. A return of zero or noSuchValue indicates one of the fol- lowing conditions: the invalid bit was set the parameter was not present If hwRsvpTeSenderAdspecGuaranteedSvc is FALSE, this returns zero or noSuchValue." ::= { hwRsvpTeSenderEntry 26 } hwRsvpTeSenderAdspecGuaranteedCsum OBJECT-TYPE SYNTAX Integer32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this is the composed value for the guaranteed ser- vice 'C' parameter since the last reshaping point. A return of zero or noSuchValue indi- cates one of the following conditions: the invalid bit was set the parameter was not present If hwRsvpTeSenderAdspecGuaranteedSvc is FALSE, this returns zero or noSuchValue." ::= { hwRsvpTeSenderEntry 27 } hwRsvpTeSenderAdspecGuaranteedDsum OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this is the composed value for the guaranteed ser- vice 'D' parameter since the last reshaping point. A return of zero or noSuchValue indi- cates one of the following conditions: the invalid bit was set the parameter was not present If hwRsvpTeSenderAdspecGuaranteedSvc is FALSE, this returns zero or noSuchValue." ::= { hwRsvpTeSenderEntry 28 } hwRsvpTeSenderAdspecGuaranteedHopCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this is the service-specific override of the hop count general characterization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set the parameter was not present If hwRsvpTeSenderAdspecGuaranteedSvc is FALSE, this returns zero or noSuchValue." ::= { hwRsvpTeSenderEntry 29 } hwRsvpTeSenderAdspecGuaranteedPathBw OBJECT-TYPE SYNTAX BitRate UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this is the service-specific override of the path bandwidth estimate general characterization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following con- ditions: the invalid bit was set the parameter was not present If hwRsvpTeSenderAdspecGuaranteedSvc is FALSE, this returns zero or noSuchValue." ::= { hwRsvpTeSenderEntry 30 } hwRsvpTeSenderAdspecGuaranteedMinLatency OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this is the service-specific override of the minimum path latency general characterization parameter from the ADSPEC. A return of zero or noSuch- Value indicates one of the following condi- tions: the invalid bit was set the parameter was not present If hwRsvpTeSenderAdspecGuaranteedSvc is FALSE, this returns zero or noSuchValue." ::= { hwRsvpTeSenderEntry 31 } hwRsvpTeSenderAdspecGuaranteedMtu OBJECT-TYPE SYNTAX Integer32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this is the service-specific override of the com- posed Maximum Transmission Unit general charac- terization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set the parameter was not present If hwRsvpTeSenderAdspecGuaranteedSvc is FALSE, this returns zero or noSuchValue." ::= { hwRsvpTeSenderEntry 32 } hwRsvpTeSenderAdspecCtrlLoadSvc OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If TRUE, the ADSPEC contains a Controlled Load Service fragment. If FALSE, the ADSPEC does not contain a Controlled Load Service frag- ment." ::= { hwRsvpTeSenderEntry 33 } hwRsvpTeSenderAdspecCtrlLoadBreak OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If TRUE, the Controlled Load Service fragment has its 'break' bit set, indicating that one or more nodes along the path do not support the controlled load service. If FALSE, and hwRsvpTeSenderAdspecCtrlLoadSvc is TRUE, the 'break' bit is not set. If hwRsvpTeSenderAdspecCtrlLoadSvc is FALSE, this returns FALSE or noSuchValue." ::= { hwRsvpTeSenderEntry 34 } hwRsvpTeSenderAdspecCtrlLoadHopCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "If hwRsvpTeSenderAdspecCtrlLoadSvc is TRUE, this is the service-specific override of the hop count general characterization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set the parameter was not present If hwRsvpTeSenderAdspecCtrlLoadSvc is FALSE, this returns zero or noSuchValue." ::= { hwRsvpTeSenderEntry 35 } hwRsvpTeSenderAdspecCtrlLoadPathBw OBJECT-TYPE SYNTAX BitRate UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "If hwRsvpTeSenderAdspecCtrlLoadSvc is TRUE, this is the service-specific override of the path bandwidth estimate general characterization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following con- ditions: the invalid bit was set the parameter was not present If hwRsvpTeSenderAdspecCtrlLoadSvc is FALSE, this returns zero or noSuchValue." ::= { hwRsvpTeSenderEntry 36 } hwRsvpTeSenderAdspecCtrlLoadMinLatency OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "If hwRsvpTeSenderAdspecCtrlLoadSvc is TRUE, this is the service-specific override of the minimum path latency general characterization parameter from the ADSPEC. A return of zero or noSuch- Value indicates one of the following condi- tions: the invalid bit was set the parameter was not present If hwRsvpTeSenderAdspecCtrlLoadSvc is FALSE, this returns zero or noSuchValue." ::= { hwRsvpTeSenderEntry 37 } hwRsvpTeSenderAdspecCtrlLoadMtu OBJECT-TYPE SYNTAX Integer32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "If hwRsvpTeSenderAdspecCtrlLoadSvc is TRUE, this is the service-specific override of the com- posed Maximum Transmission Unit general charac- terization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set the parameter was not present If hwRsvpTeSenderAdspecCtrlLoadSvc is FALSE, this returns zero or noSuchValue." ::= { hwRsvpTeSenderEntry 38 } hwRsvpTeSenderTtl OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The TTL value in the RSVP header that was last received." ::= { hwRsvpTeSenderEntry 39 } hwRsvpTeLspId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A 16-bit identifier used in the SENDER_TEMPLATE and the FILTER_SPEC that can be changed to allow a sender to share resources with itself." ::= { hwRsvpTeSenderEntry 40 } hwRsvpTeSenderMsgIdSndFlag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that the message sender requests the peer to send an acknowledgment for the message. (0x01: ACK desired.)" ::= { hwRsvpTeSenderEntry 41 } hwRsvpTeSenderMsgIdSndEpoch OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "A value that indicates when the Message_Identi- fier sequence has been reset." ::= { hwRsvpTeSenderEntry 42 } hwRsvpTeSenderMsgIdSndNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "When combined with the message generator's IP address, the Message_Identifier field uniquely identifies a message. The values placed in this field change incrementally and only decrease when the Epoch changes or when the value wraps. A return of 0 indicates the absence of the MESSAGE_ID object to be sent." ::= { hwRsvpTeSenderEntry 43 } hwRsvpTeSenderMsgIdRcvFlag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The message ID flag of the message latest received. It is used to identify whether ACK is desired or not. And it can be extended. (0x01: ACK desired.)" ::= { hwRsvpTeSenderEntry 44 } hwRsvpTeSenderMsgIdRcvEpoch OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The message ID epoch of the message latest received form the interface." ::= { hwRsvpTeSenderEntry 45 } hwRsvpTeSenderMsgIdRcvNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The message ID number of the message latest received form the interface. A return of 0 indicates the absence of the MESSAGE_ID object received." ::= { hwRsvpTeSenderEntry 46 } hwRsvpTeSenderClassType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the class-type. A return of zero indicates the absence of the object." ::= { hwRsvpTeSenderEntry 47 } hwRsvpTeSenderLabelRequestCtype OBJECT-TYPE SYNTAX INTEGER { withoutLabelRange(1), withAtmLabelRange(2), withFrameRelayLabelRange(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of label request (without label range, with ATM label range, with frame relay label range, etc)." ::= { hwRsvpTeSenderEntry 48 } hwRsvpTeSenderLabelRequestL3pid OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An identifier of the layer 3 protocol using this path. Standard Ethertype values are used." ::= { hwRsvpTeSenderEntry 49 } hwRsvpTeSenderLabelRequestAtmMinVpi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This 12 bit field specifies the lower bound of a block of Virtual Path Identifiers that is supported on the originating switch. If the VPI is less than 12-bits it must be right justified in this field and preceding bits must be set to zero." ::= { hwRsvpTeSenderEntry 50 } hwRsvpTeSenderLabelRequestAtmMinVci OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This 16 bit field specifies the lower bound of a block of Virtual Connection Identifiers that is supported on the originating switch. If the VCI is less than 16-bits it must be right justified in this field and preceding bits must be set to zero." ::= { hwRsvpTeSenderEntry 51 } hwRsvpTeSenderLabelRequestAtmMaxVpi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This 12 bit field specifies the upper bound of a block of Virtual Path Identifiers that is supported on the originating switch. If the VPI is less than 12-bits it must be right justified in this field and preceding bits must be set to zero." ::= { hwRsvpTeSenderEntry 52 } hwRsvpTeSenderLabelRequestAtmMaxVci OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This 16 bit field specifies the upper bound of a block of Virtual Connection Identifiers that is supported on the originating switch. If the VCI is less than 16-bits it must be right justified in this field and preceding bits must be set to zero." ::= { hwRsvpTeSenderEntry 53 } hwRsvpTeSenderLabelRequestFrMinDlci OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This 23-bit field specifies the lower bound of a block of Data Link Connection Identifiers (DLCIs) that is supported on the originating switch. The DLCI must be right justified in this field and unused bits must be set to 0." ::= { hwRsvpTeSenderEntry 54 } hwRsvpTeSenderLabelRequestFrMaxDlci OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This 23-bit field specifies the upper bound of a block of Data Link Connection Identifiers (DLCIs) that is supported on the originating switch. The DLCI must be right justified in this field and unused bits must be set to 0." ::= { hwRsvpTeSenderEntry 55 } hwRsvpTeSenderSessionAttrType OBJECT-TYPE SYNTAX INTEGER { withRa(1), withoutRa(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the session_attribute (without resource affinities or with resource affinities)." ::= { hwRsvpTeSenderEntry 56 } hwRsvpTeSenderSessionAttrSetupPrio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The priority of the session with respect to taking resources, in the range of 0 to 7. The value 0 is the highest priority. The Setup Priority is used in deciding whether this session can preempt another session. The default value is 7." ::= { hwRsvpTeSenderEntry 57 } hwRsvpTeSenderSessionAttrHoldPrio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The priority of the session with respect to holding resources, in the range of 0 to 7. The value 0 is the highest priority. Holding Priority is used in deciding whether this session can be preempted by another session. The default value is 7." ::= { hwRsvpTeSenderEntry 58 } hwRsvpTeSenderSessionAttrFlag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A mixed value. (0x01: Local protection desired; 0x02: Label recording desired; 0x04: SE Style desired; 0x08: bandwidth protection desired; 0x10: node protection desired; 0x20: Path re-evaluation request; 0x40: Soft preemption desired)" ::= { hwRsvpTeSenderEntry 59 } hwRsvpTeSenderSessionAttrName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Session name, a null padded string of characters." ::= { hwRsvpTeSenderEntry 60 } hwRsvpTeSenderSessionAttrExcludeAny OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "A 32-bit vector representing a set of attribute filters associated with a tunnel any of which renders a link unacceptable." ::= { hwRsvpTeSenderEntry 61 } hwRsvpTeSenderSessionAttrIncludeAny OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "A 32-bit vector representing a set of attribute filters associated with a tunnel any of which renders a link acceptable (with respect to this test). A null set (all bits set to zero) automatically passes." ::= { hwRsvpTeSenderEntry 62 } hwRsvpTeSenderSessionAttrIncludeAll OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "A 32-bit vector representing a set of attribute filters associated with a tunnel all of which must be present for a link to be acceptable (with respect to this test). A null set (all bits set to zero) automatically passes." ::= { hwRsvpTeSenderEntry 63 } hwRsvpTeSenderFrrSetupPrio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The priority of the backup path with respect to taking resources, in the range 0 to 7. The value 0 is the highest priority. Setup Priority is used in deciding whether this session can preempt another session. See [RSVP-TE] for the usage on priority. The default value is 7." ::= { hwRsvpTeSenderEntry 64 } hwRsvpTeSenderFrrHoldPrio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The priority of the backup path with respect to holding resources, in the range 0 to 7. The value 0 is the highest priority. Holding Priority is used in deciding whether this session can be preempted by another session. The default value is 7. " ::= { hwRsvpTeSenderEntry 65 } hwRsvpTeSenderFrrHopLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of extra hops the backup path is allowed to take, from current node (a PLR) to an MP, with PLR and MP excluded from the count. For example, hop-limit of 0 means that only direct links between PLR and MP can be considered. The default value is 16." ::= { hwRsvpTeSenderEntry 66 } hwRsvpTeSenderFrrFlag OBJECT-TYPE SYNTAX INTEGER { oneToOneDesired(1), facilityDesired(2), noBackupDesired(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "An enumerable value to indicate the protection schema desired (0x01, One-to-One Backup Desired; 0x02, Facility Backup Desired; 0x03, No Backup Desired)." ::= { hwRsvpTeSenderEntry 67 } hwRsvpTeSenderFrrBandwidth OBJECT-TYPE SYNTAX BitRate UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "Bandwidth estimate; 32-bit IEEE floating point integer, in bits per second." ::= { hwRsvpTeSenderEntry 68 } hwRsvpTeSenderFrrExcludeAny OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "A 32-bit vector representing a set of attribute filters associated with a backup path, any of which renders a link unacceptable." ::= { hwRsvpTeSenderEntry 69 } hwRsvpTeSenderFrrIncludeAny OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "A 32-bit vector representing a set of attribute filters associated with a backup path, any of which renders a link acceptable (with respect to this test). A null set (all bits set to zero) automatically passes." ::= { hwRsvpTeSenderEntry 70 } hwRsvpTeSenderFrrIncludeAll OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "A 32-bit vector representing a set of attribute filters associated with a backup path, all of which must be present for a link to be acceptable (with respect to this test). A null set (all bits set to zero) automatically passes." ::= { hwRsvpTeSenderEntry 71 } hwRsvpTeSenderFrrInuseFlag OBJECT-TYPE SYNTAX INTEGER { normal(1), plrInUse(2), mpInUse(3), plrAndMpInUse(4), underProtection(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "An enumerable value to indicate the fast-reroute state of this sender (normal, PLR in use, MP in use, PLR in use and MP in use, under protection)." ::= { hwRsvpTeSenderEntry 72 } hwRsvpTeSenderDiffServPsc OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This 16 bits field indicates a PHB Scheduling Class to be supported by the LSP." ::= { hwRsvpTeSenderEntry 73 } hwRsvpTeResvTable OBJECT-TYPE SYNTAX SEQUENCE OF HwRsvpTeResvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing the state information displayed by receivers in RESV messages." ::= { hwRsvpTeObjects 3 } hwRsvpTeResvEntry OBJECT-TYPE SYNTAX HwRsvpTeResvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing the state information displayed by a single receiver's RESV message concerning a single sender." INDEX { hwRsvpTeSessionNumber, hwRsvpTeResvNumber } ::= { hwRsvpTeResvTable 1 } HwRsvpTeResvEntry ::= SEQUENCE { hwRsvpTeResvNumber Gauge32, hwRsvpTeResvType SessionType, hwRsvpTeResvDestAddr OCTET STRING, hwRsvpTeResvSenderAddr OCTET STRING, hwRsvpTeResvDestAddrLength Integer32, hwRsvpTeResvSenderAddrLength Integer32, hwRsvpTeResvHopAddr OCTET STRING, hwRsvpTeResvHopLih Integer32, hwRsvpTeResvInterface Integer32, hwRsvpTeResvService QosService, hwRsvpTeResvTSpecRate BitRate, hwRsvpTeResvTSpecPeakRate BitRate, hwRsvpTeResvTSpecBurst BurstSize, hwRsvpTeResvTSpecMinTu MessageSize, hwRsvpTeResvTSpecMaxTu MessageSize, hwRsvpTeResvRSpecRate BitRate, hwRsvpTeResvRSpecSlack Integer32, hwRsvpTeResvInterval Integer32, hwRsvpTeResvScope OCTET STRING, hwRsvpTeResvShared TruthValue, hwRsvpTeResvExplicit TruthValue, hwRsvpTeResvRsvpHop TruthValue, hwRsvpTeResvPolicy OCTET STRING, hwRsvpTeResvTtl Integer32, hwRsvpTeResvConfirm OCTET STRING } hwRsvpTeResvNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The number of this reservation request. This is for SNMP Indexing purposes only and has no relation to any protocol value." ::= { hwRsvpTeResvEntry 1 } hwRsvpTeResvType OBJECT-TYPE SYNTAX SessionType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of session (IP4, IP6, IP6 with flow information, etc)." ::= { hwRsvpTeResvEntry 2 } hwRsvpTeResvDestAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address used by all senders in this session." ::= { hwRsvpTeResvEntry 3 } hwRsvpTeResvSenderAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The source address of the sender selected by this reservation. The value of all zeroes in- dicates 'all senders'." ::= { hwRsvpTeResvEntry 4 } hwRsvpTeResvDestAddrLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The length of the destination address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits." ::= { hwRsvpTeResvEntry 5 } hwRsvpTeResvSenderAddrLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The length of the sender's address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits." ::= { hwRsvpTeResvEntry 6 } hwRsvpTeResvHopAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The address used by the next RSVP hop (which may be the ultimate receiver)." ::= { hwRsvpTeResvEntry 7 } hwRsvpTeResvHopLih OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Logical Interface Handle received from the previous RSVP hop (which may be the ultimate receiver)." ::= { hwRsvpTeResvEntry 8 } hwRsvpTeResvInterface OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex value of the interface on which this RESV message was most recently received." ::= { hwRsvpTeResvEntry 9 } hwRsvpTeResvService OBJECT-TYPE SYNTAX QosService MAX-ACCESS read-only STATUS current DESCRIPTION "The QoS Service classification requested by the receiver." ::= { hwRsvpTeResvEntry 10 } hwRsvpTeResvTSpecRate OBJECT-TYPE SYNTAX BitRate UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The Average Bit Rate of the sender's data stream. Within a transmission burst, the ar- rival rate may be as fast as hwRsvpTeResvTSpec- PeakRate (if supported by the service model); however, averaged across two or more burst in- tervals, the rate should not exceed hwRsvpTeResvTSpecRate. Note that this is a prediction, often based on the general capability of a type of codec or particular encoding; the measured average rate may be significantly lower." ::= { hwRsvpTeResvEntry 11 } hwRsvpTeResvTSpecPeakRate OBJECT-TYPE SYNTAX BitRate UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The Peak Bit Rate of the sender's data stream. Traffic arrival is not expected to exceed this rate at any time, apart from the effects of jitter in the network. If not specified in the TSpec, this returns zero or noSuchValue." ::= { hwRsvpTeResvEntry 12 } hwRsvpTeResvTSpecBurst OBJECT-TYPE SYNTAX BurstSize UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the largest burst expected from the sender at a time. If this is less than the sender's advertised burst size, the receiver is asking the network to provide flow pacing beyond what would be provided under normal circumstances. Such pac- ing is at the network's option." ::= { hwRsvpTeResvEntry 13 } hwRsvpTeResvTSpecMinTu OBJECT-TYPE SYNTAX MessageSize MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum message size for this flow. The policing algorithm will treat smaller messages as though they are this size." ::= { hwRsvpTeResvEntry 14 } hwRsvpTeResvTSpecMaxTu OBJECT-TYPE SYNTAX MessageSize MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum message size for this flow. The admission algorithm will reject TSpecs whose Maximum Transmission Unit, plus the interface headers, exceed the interface MTU." ::= { hwRsvpTeResvEntry 15 } hwRsvpTeResvRSpecRate OBJECT-TYPE SYNTAX BitRate UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "If the requested service is guaranteed, as specified by hwRsvpTeResvService, this is the clearing rate that is being requested. Other- wise, it is zero, or the agent may return noSuchValue." ::= { hwRsvpTeResvEntry 16 } hwRsvpTeResvRSpecSlack OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "If the requested service is guaranteed, as specified by hwRsvpTeResvService, this is the delay slack. Otherwise, it is zero, or the agent may return noSuchValue." ::= { hwRsvpTeResvEntry 17 } hwRsvpTeResvInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interval between refresh messages as ad- vertised by the Next Hop." ::= { hwRsvpTeResvEntry 18 } hwRsvpTeResvScope OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..65535)) MAX-ACCESS read-only STATUS current DESCRIPTION "The contents of the scope object, displayed as an uninterpreted string of octets, including the object header. In the absence of such an object, this should be of zero length. If the length is non-zero, this contains a series of IP4 or IP6 addresses." ::= { hwRsvpTeResvEntry 19 } hwRsvpTeResvShared OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If TRUE, a reservation shared among senders is requested. If FALSE, a reservation specific to this sender is requested." ::= { hwRsvpTeResvEntry 20 } hwRsvpTeResvExplicit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If TRUE, individual senders are listed using Filter Specifications. If FALSE, all senders are implicitly selected. The Scope Object will contain a list of senders that need to receive this reservation request for the purpose of routing the RESV message." ::= { hwRsvpTeResvEntry 21 } hwRsvpTeResvRsvpHop OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If TRUE, the node believes that the previous IP hop is an RSVP hop. If FALSE, the node be- lieves that the previous IP hop may not be an RSVP hop." ::= { hwRsvpTeResvEntry 22 } hwRsvpTeResvPolicy OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..65535)) MAX-ACCESS read-only STATUS current DESCRIPTION "The contents of the policy object, displayed as an uninterpreted string of octets, including the object header. In the absence of such an object, this should be of zero length." ::= { hwRsvpTeResvEntry 23 } hwRsvpTeResvTtl OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The TTL value in the RSVP header that was last received." ::= { hwRsvpTeResvEntry 24 } hwRsvpTeResvConfirm OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Receiver's address." ::= { hwRsvpTeResvEntry 25 } hwRsvpTeResvFwdTable OBJECT-TYPE SYNTAX SEQUENCE OF HwRsvpTeResvFwdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing the state information displayed upstream in RESV messages." ::= { hwRsvpTeObjects 4 } hwRsvpTeResvFwdEntry OBJECT-TYPE SYNTAX HwRsvpTeResvFwdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing the state information displayed upstream in an RESV message concern- ing a single sender." INDEX { hwRsvpTeSessionNumber, hwRsvpTeResvFwdNumber } ::= { hwRsvpTeResvFwdTable 1 } HwRsvpTeResvFwdEntry ::= SEQUENCE { hwRsvpTeResvFwdNumber Gauge32, hwRsvpTeResvFwdType SessionType, hwRsvpTeResvFwdDestAddr OCTET STRING, hwRsvpTeResvFwdSenderAddr OCTET STRING, hwRsvpTeResvFwdDestAddrLength Integer32, hwRsvpTeResvFwdSenderAddrLength Integer32, hwRsvpTeResvFwdHopAddr OCTET STRING, hwRsvpTeResvFwdHopLih Integer32, hwRsvpTeResvFwdInterface Integer32, hwRsvpTeResvFwdService QosService, hwRsvpTeResvFwdTSpecRate BitRate, hwRsvpTeResvFwdTSpecPeakRate BitRate, hwRsvpTeResvFwdTSpecBurst BurstSize, hwRsvpTeResvFwdTSpecMinTu MessageSize, hwRsvpTeResvFwdTSpecMaxTu MessageSize, hwRsvpTeResvFwdRSpecRate BitRate, hwRsvpTeResvFwdRSpecSlack Integer32, hwRsvpTeResvFwdInterval Integer32, hwRsvpTeResvFwdScope OCTET STRING, hwRsvpTeResvFwdShared TruthValue, hwRsvpTeResvFwdExplicit TruthValue, hwRsvpTeResvFwdRsvpHop TruthValue, hwRsvpTeResvFwdPolicy OCTET STRING, hwRsvpTeResvFwdTtl Integer32, hwRsvpTeResvFwdMsgIdFlag Integer32, hwRsvpTeResvFwdMsgIdEpoch Gauge32, hwRsvpTeResvFwdMsgIdNumber Gauge32 } hwRsvpTeResvFwdNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The number of this reservation request. This is for SNMP Indexing purposes only and has no relation to any protocol value." ::= { hwRsvpTeResvFwdEntry 1 } hwRsvpTeResvFwdType OBJECT-TYPE SYNTAX SessionType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of session (IP4, IP6, IP6 with flow information, etc)." ::= { hwRsvpTeResvFwdEntry 2 } hwRsvpTeResvFwdDestAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address used by all senders in this session." ::= { hwRsvpTeResvFwdEntry 3 } hwRsvpTeResvFwdSenderAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The source address of the sender selected by this reservation. The value of all zeroes in- dicates 'all senders'." ::= { hwRsvpTeResvFwdEntry 4 } hwRsvpTeResvFwdDestAddrLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The length of the destination address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits." ::= { hwRsvpTeResvFwdEntry 5 } hwRsvpTeResvFwdSenderAddrLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The length of the sender's address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits." ::= { hwRsvpTeResvFwdEntry 6 } hwRsvpTeResvFwdHopAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the (previous) RSVP that will receive this message." ::= { hwRsvpTeResvFwdEntry 7 } hwRsvpTeResvFwdHopLih OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Logical Interface Handle sent to the (pre- vious) RSVP that will receive this message." ::= { hwRsvpTeResvFwdEntry 8 } hwRsvpTeResvFwdInterface OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex value of the interface on which this RESV message was most recently sent." ::= { hwRsvpTeResvFwdEntry 9 } hwRsvpTeResvFwdService OBJECT-TYPE SYNTAX QosService MAX-ACCESS read-only STATUS current DESCRIPTION "The QoS Service classification requested." ::= { hwRsvpTeResvFwdEntry 10 } hwRsvpTeResvFwdTSpecRate OBJECT-TYPE SYNTAX BitRate UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The Average Bit Rate of the sender's data stream. Within a transmission burst, the ar- rival rate may be as fast as hwRsvpTeResvFwdT- SpecPeakRate (if supported by the service model);however, averaged across two or more burst intervals, the rate should not exceed hwRsvpTeResvFwdTSpecRate. Note that this is a prediction, often based on the general capability of a type of codec or particular encoding; the measured average rate may be significantly lower." ::= { hwRsvpTeResvFwdEntry 11 } hwRsvpTeResvFwdTSpecPeakRate OBJECT-TYPE SYNTAX BitRate UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The Peak Bit Rate of the sender's data stream Traffic arrival is not expected to exceed this rate at any time, apart from the effects of jitter in the network. If not specified in the TSpec, this returns zero or noSuchValue." ::= { hwRsvpTeResvFwdEntry 12 } hwRsvpTeResvFwdTSpecBurst OBJECT-TYPE SYNTAX BurstSize UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the largest burst expected from the sender at a time. If this is less than the sender's advertised burst size, the receiver is asking the network to provide flow pacing beyond what would be provided under normal circumstances. Such pac- ing is at the network's option." ::= { hwRsvpTeResvFwdEntry 13 } hwRsvpTeResvFwdTSpecMinTu OBJECT-TYPE SYNTAX MessageSize MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum message size for this flow. The policing algorithm will treat smaller messages as though they are this size." ::= { hwRsvpTeResvFwdEntry 14 } hwRsvpTeResvFwdTSpecMaxTu OBJECT-TYPE SYNTAX MessageSize MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum message size for this flow. The admission algorithm will reject TSpecs whose Maximum Transmission Unit, plus the interface headers, exceed the interface MTU." ::= { hwRsvpTeResvFwdEntry 15 } hwRsvpTeResvFwdRSpecRate OBJECT-TYPE SYNTAX BitRate UNITS "bytes per second" MAX-ACCESS read-only STATUS current DESCRIPTION "If the requested service is Guaranteed, as specified by hwRsvpTeResvService, this is the clearing rate that is being requested. Other- wise, it is zero, or the agent may return noSuchValue." ::= { hwRsvpTeResvFwdEntry 16 } hwRsvpTeResvFwdRSpecSlack OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "If the requested service is Guaranteed, as specified by hwRsvpTeResvService, this is the delay slack. Otherwise, it is zero, or the agent may return noSuchValue." ::= { hwRsvpTeResvFwdEntry 17 } hwRsvpTeResvFwdInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interval between refresh messages adver- tised to the Previous Hop." ::= { hwRsvpTeResvFwdEntry 18 } hwRsvpTeResvFwdScope OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..65535)) MAX-ACCESS read-only STATUS current DESCRIPTION "The contents of the scope object, displayed as an uninterpreted string of octets, including the object header. In the absence of such an object, this should be of zero length." ::= { hwRsvpTeResvFwdEntry 19 } hwRsvpTeResvFwdShared OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If TRUE, a reservation shared among senders is requested. If FALSE, a reservation specific to this sender is requested." ::= { hwRsvpTeResvFwdEntry 20 } hwRsvpTeResvFwdExplicit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If TRUE, individual senders are listed using Filter Specifications. If FALSE, all senders are implicitly selected. The Scope Object will contain a list of senders that need to receive this reservation request for the purpose of routing the RESV message." ::= { hwRsvpTeResvFwdEntry 21 } hwRsvpTeResvFwdRsvpHop OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If TRUE, the node believes that the next IP hop is an RSVP hop. If FALSE, the node be- lieves that the next IP hop may not be an RSVP hop." ::= { hwRsvpTeResvFwdEntry 22 } hwRsvpTeResvFwdPolicy OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..65535)) MAX-ACCESS read-only STATUS current DESCRIPTION "The contents of the policy object, displayed as an uninterpreted string of octets, including the object header. In the absence of such an object, this should be of zero length." ::= { hwRsvpTeResvFwdEntry 23 } hwRsvpTeResvFwdTtl OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The TTL value in the RSVP header that was last received." ::= { hwRsvpTeResvFwdEntry 24 } hwRsvpTeResvFwdMsgIdFlag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that the message sender requests the peer to send an acknowledgment for the message. (0x01: ACK desired.)" ::= { hwRsvpTeResvFwdEntry 25 } hwRsvpTeResvFwdMsgIdEpoch OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "A value that indicates when the Message_Identi- fier sequence has been reset." ::= { hwRsvpTeResvFwdEntry 26 } hwRsvpTeResvFwdMsgIdNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "When combined with the message generator's IP address, the Message_Identifier field uniquely identifies a message. The values placed in this field change incrementally and only decrease when the epoch changes or when the value wraps. A return of 0 indicates the absence of the MESSAGE_ID object." ::= { hwRsvpTeResvFwdEntry 27 } -- The RSVP Interface Attributes Database contains the -- RSVP-specific information for an interface. Information -- that is shared with other reservation procedures such -- as ST-II is in the Integrated Interface Attributes -- Database. hwRsvpTeIfTable OBJECT-TYPE SYNTAX SEQUENCE OF HwRsvpTeIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RSVP-specific attributes of the system's interfaces." ::= { hwRsvpTeObjects 5 } hwRsvpTeIfEntry OBJECT-TYPE SYNTAX HwRsvpTeIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RSVP-specific attributes of the a given interface." INDEX { ifIndex } ::= { hwRsvpTeIfTable 1 } HwRsvpTeIfEntry ::= SEQUENCE { hwRsvpTeIfUdpNbrs Gauge32, hwRsvpTeIfIpNbrs Gauge32, hwRsvpTeIfNbrs Gauge32, hwRsvpTeIfRefreshBlockadeMultiple Integer32, hwRsvpTeIfRefreshMultiple Integer32, hwRsvpTeIfTtl Integer32, hwRsvpTeIfRefreshInterval TimeInterval, hwRsvpTeIfRouteDelay TimeInterval, hwRsvpTeIfEnabled TruthValue, hwRsvpTeIfUdpRequired TruthValue, hwRsvpTeIfStatus RowStatus, hwRsvpTeIfHelloEnabled TruthValue, hwRsvpTeIfSrefreshEnabled TruthValue, hwRsvpTeIfSrefreshInterval TimeInterval, hwRsvpTeIfRetranIncDelta Integer32, hwRsvpTeIfRetranInterval TimeInterval, hwRsvpTeIfAuthEnabled TruthValue, hwRsvpTeIfAuthEncrypted TruthValue, hwRsvpTeIfAuthHandshake TruthValue, hwRsvpTeIfAuthLifeTime TimeInterval, hwRsvpTeIfAuthKey OCTET STRING, hwRsvpTeIfWindowSize Integer32 } hwRsvpTeIfUdpNbrs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of neighbors perceived to be using only the RSVP UDP Encapsulation." ::= { hwRsvpTeIfEntry 1 } hwRsvpTeIfIpNbrs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of neighbors perceived to be using only the RSVP IP Encapsulation." ::= { hwRsvpTeIfEntry 2 } hwRsvpTeIfNbrs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of neighbors currently perceived; this will exceed hwRsvpTeIfIpNbrs + hwRsvpTeIfUdpNbrs by the number of neighbors using both encapsu- lations." ::= { hwRsvpTeIfEntry 3 } hwRsvpTeIfRefreshBlockadeMultiple OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the RSVP value 'Kb', Which is the minimum number of refresh intervals that blockade state will last once entered." ::= { hwRsvpTeIfEntry 4 } hwRsvpTeIfRefreshMultiple OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the RSVP value 'K', which is the number of refresh intervals which must elapse (minimum) before a PATH or RESV message which is not being refreshed will be aged out." ::= { hwRsvpTeIfEntry 5 } -- which is to say, no override hwRsvpTeIfTtl OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of SEND_TTL used on this interface for messages this node originates. If set to zero, the node determines the TTL via other means." ::= { hwRsvpTeIfEntry 6 } -- 30 seconds hwRsvpTeIfRefreshInterval OBJECT-TYPE SYNTAX TimeInterval UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the RSVP value 'R', which is the minimum period between refresh transmissions of a given PATH or RESV message on an interface. The default value is 30000." ::= { hwRsvpTeIfEntry 7 } -- 2 seconds hwRsvpTeIfRouteDelay OBJECT-TYPE SYNTAX TimeInterval UNITS "hundredths of a second" MAX-ACCESS read-only STATUS current DESCRIPTION "The approximate period from the time a route is changed to the time a resulting message ap- pears on the interface. The default value is 200." ::= { hwRsvpTeIfEntry 8 } hwRsvpTeIfEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Its value is always TRUE, if RSVP is enabled on this Interface." ::= { hwRsvpTeIfEntry 9 } hwRsvpTeIfUdpRequired OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If TRUE, manual configuration forces the use of UDP encapsulation on the interface. If FALSE, UDP encapsulation is only used if hwRsvpTeI- fUdpNbrs is not zero." ::= { hwRsvpTeIfEntry 10 } hwRsvpTeIfStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "'active' on interfaces that are configured for RSVP." ::= { hwRsvpTeIfEntry 11 } hwRsvpTeIfHelloEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If TRUE, RSVPTE hello is enabled on this Interface. If FALSE, RSVPTE hello is not enabled on this interface" ::= { hwRsvpTeIfEntry 12 } hwRsvpTeIfSrefreshEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If TRUE, srefresh is enabled on this interface. If FALSE, srefresh is not enabled on this interface." ::= { hwRsvpTeIfEntry 13 } hwRsvpTeIfSrefreshInterval OBJECT-TYPE SYNTAX TimeInterval UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The srefresh interval. I.e. time difference between 2 refreshes. The default value is 30000." ::= { hwRsvpTeIfEntry 14 } hwRsvpTeIfRetranIncDelta OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Delta governs the speed with which the sender increases the retransmission interval. The ratio of two successive retransmission intervals is (1 + Delta)." ::= { hwRsvpTeIfEntry 15 } hwRsvpTeIfRetranInterval OBJECT-TYPE SYNTAX TimeInterval UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The retransmission interval. The default value is 5000." ::= { hwRsvpTeIfEntry 16 } hwRsvpTeIfAuthEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If TRUE, authentication is enabled on this interface. If FALSE, authentication is not enabled on this interface." ::= { hwRsvpTeIfEntry 17 } hwRsvpTeIfAuthEncrypted OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This states that authentication key is encrypted or not." ::= { hwRsvpTeIfEntry 18 } hwRsvpTeIfAuthHandshake OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Handshaking is enabled authentications." ::= { hwRsvpTeIfEntry 19 } hwRsvpTeIfAuthLifeTime OBJECT-TYPE SYNTAX TimeInterval UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Authentication life time. The default value is 1800000." ::= { hwRsvpTeIfEntry 20 } hwRsvpTeIfAuthKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..392)) MAX-ACCESS read-only STATUS current DESCRIPTION "Authentication key, used for authentication processing. For security purposes, a get on this returns a zero length string." ::= { hwRsvpTeIfEntry 21 } hwRsvpTeIfWindowSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Administrators can specify a message window corresponding to the worst case reordering behavior. For example, one might specify that packets reordered within a 32 message window would be accepted. If no reordering can occur, the window is set to one. The maximum value is 64. The default value is 1." ::= { hwRsvpTeIfEntry 22 } -- The RSVP Neighbor Database lists the neighbors the RSVP -- process currently is receiving messages from. hwRsvpTeNbrTable OBJECT-TYPE SYNTAX SEQUENCE OF HwRsvpTeNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing the Neighbors of an RSVP system." ::= { hwRsvpTeObjects 6 } hwRsvpTeNbrEntry OBJECT-TYPE SYNTAX HwRsvpTeNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing a single RSVP Neigh- bor." INDEX { ifIndex, hwRsvpTeNbrAddress } ::= { hwRsvpTeNbrTable 1 } HwRsvpTeNbrEntry ::= SEQUENCE { hwRsvpTeNbrAddress OCTET STRING, hwRsvpTeNbrProtocol INTEGER, hwRsvpTeNbrStatus RowStatus, hwRsvpTeNbrSendersNumber Gauge32, hwRsvpTeNbrReceiversNumber Gauge32, hwRsvpTeNbrHelloEnabled TruthValue, hwRsvpTeNbrHelloSrcInstance Gauge32, hwRsvpTeNbrHelloDstInstance Gauge32, hwRsvpTeNbrHelloLostCounter Gauge32, hwRsvpTeNbrHelloType INTEGER, hwRsvpTeNbrGrCapability Integer32, hwRsvpTeNbrGrRestartTime TimeStamp, hwRsvpTeNbrGrRecoveryTime TimeStamp, hwRsvpTeNbrGrStatus INTEGER, hwRsvpTeNbrAuthKeyId OCTET STRING, hwRsvpTeNbrReductionEnabled TruthValue, hwRsvpTeNbrReliabilityEnabled TruthValue } hwRsvpTeNbrAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP4 or IP6 Address used by this neighbor. This object may not be changed when the value of the RowStatus object is 'active'." ::= { hwRsvpTeNbrEntry 1 } hwRsvpTeNbrProtocol OBJECT-TYPE SYNTAX INTEGER { ip(1), udp(2), both(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The encapsulation being used by this neigh- bor." ::= { hwRsvpTeNbrEntry 2 } hwRsvpTeNbrStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "'active' for all neighbors. This object may be used to configure neighbors. In the pres- ence of configured neighbors, the implementa- tion may (but is not required to) limit the set of valid neighbors to those configured." ::= { hwRsvpTeNbrEntry 3 } hwRsvpTeNbrSendersNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of senders on the neighbor." ::= { hwRsvpTeNbrEntry 4 } hwRsvpTeNbrReceiversNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of receivers on the neighbor." ::= { hwRsvpTeNbrEntry 5 } hwRsvpTeNbrHelloEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If TRUE, hello is enabled on the neighbor." ::= { hwRsvpTeNbrEntry 6 } hwRsvpTeNbrHelloSrcInstance OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Source instance of the neighbor." ::= { hwRsvpTeNbrEntry 7 } hwRsvpTeNbrHelloDstInstance OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Destination instance of the neighbor." ::= { hwRsvpTeNbrEntry 8 } hwRsvpTeNbrHelloLostCounter OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the hello messages have been sent to the neighbor for which hello ACK has not received yet." ::= { hwRsvpTeNbrEntry 9 } hwRsvpTeNbrHelloType OBJECT-TYPE SYNTAX INTEGER { request(1), ack(2), none(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Hello type that is being sent to the neighbor. A return of 3[none] indicates that hello is disabled on the nbr." ::= { hwRsvpTeNbrEntry 10 } hwRsvpTeNbrGrCapability OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Gives neighbor capability to support GR or undergo GR, in case of control plane restart. A mixed value. (0x01: Self GR capability of neighbor; 0x02: GR support capability of neighbor; 0x04: Neighbor capable of receiving RecoveryPath message; 0x08: Neighbor capable of sending RecoveryPath message)" ::= { hwRsvpTeNbrEntry 11 } hwRsvpTeNbrGrRestartTime OBJECT-TYPE SYNTAX TimeStamp UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Neighbor nodes GR restart time value." ::= { hwRsvpTeNbrEntry 12 } hwRsvpTeNbrGrRecoveryTime OBJECT-TYPE SYNTAX TimeStamp UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Neighbor nodes GR recovery time value." ::= { hwRsvpTeNbrEntry 13 } hwRsvpTeNbrGrStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), supporting(2), restarting(3), restartTimerRunning(4), recoveryTimerRunning(5), grEnd(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Neighbor nodes GR status. (0x01, No GR activity; 0x02, Neighbor router is supporting GR; 0x03, Neighbor router is restarting; 0x04, Restart timer is running; 0x05, Recovery timer is running; 0x06, Neighbor GR end.)" ::= { hwRsvpTeNbrEntry 14 } hwRsvpTeNbrAuthKeyId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0 | 6)) MAX-ACCESS read-only STATUS current DESCRIPTION "Neighbor's authentication key, used for authentication processing. A return of null string indicates the absence of the item. For security purposes, a get on this returns a zero length string." ::= { hwRsvpTeNbrEntry 15 } hwRsvpTeNbrReductionEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If TRUE srefresh is enabled on the neighbor, else srefresh is not enabled on the neighbor." ::= { hwRsvpTeNbrEntry 16 } hwRsvpTeNbrReliabilityEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If TRUE reliability is enabled on the neighbor, else reliability is not enabled on the neighbor." ::= { hwRsvpTeNbrEntry 17 } hwRsvpTeMessageIdTable OBJECT-TYPE SYNTAX SEQUENCE OF HwRsvpTeMessageIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describes the MessageIds of an RSVP system." ::= { hwRsvpTeObjects 7 } hwRsvpTeMessageIdEntry OBJECT-TYPE SYNTAX HwRsvpTeMessageIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describes the MessageIds of an RSVP system." INDEX { ifIndex, hwRsvpTeNbrAddress, hwRsvpTeMessageIdEpoch, hwRsvpTeMessageIdNumber } ::= { hwRsvpTeMessageIdTable 1 } HwRsvpTeMessageIdEntry ::= SEQUENCE { hwRsvpTeMessageIdEpoch Gauge32, hwRsvpTeMessageIdNumber Gauge32, hwRsvpTeMessageIdFlag INTEGER } hwRsvpTeMessageIdEpoch OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "A value that indicates when the Message_Identi- fier sequence has been reset." ::= { hwRsvpTeMessageIdEntry 1 } hwRsvpTeMessageIdNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "When combined with the message generator's IP address, the Message_Identifier field uniquely identifies a message. The values placed in this field change incrementally and only decrease when the epoch changes or when the value wraps." ::= { hwRsvpTeMessageIdEntry 2 } hwRsvpTeMessageIdFlag OBJECT-TYPE SYNTAX INTEGER { senderIncoming(1), senderOutgoing(2), resv(3), resvFwd(4), rtBuff(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "A enumerable value to indicate the type of this Message_Identifier. (1: SenderIncoming; 2: SenderOutgoing; 3: Resv; 4: ResvFwd; 5: RtBuff)" ::= { hwRsvpTeMessageIdEntry 3 } hwRsvpTeFilterSpecTable OBJECT-TYPE SYNTAX SEQUENCE OF HwRsvpTeFilterSpecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describes the FilterSpecs of an RSVP system." ::= { hwRsvpTeObjects 8 } hwRsvpTeFilterSpecEntry OBJECT-TYPE SYNTAX HwRsvpTeFilterSpecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describes the FilterSpecs of an RSVP system." INDEX { hwRsvpTeSessionNumber, hwRsvpTeResvNumber, hwRsvpTeFilterSpecNumber } ::= { hwRsvpTeFilterSpecTable 1 } HwRsvpTeFilterSpecEntry ::= SEQUENCE { hwRsvpTeFilterSpecNumber Gauge32, hwRsvpTeFilterSpecLspId Integer32, hwRsvpTeFilterSpecIngressLsrId OCTET STRING, hwRsvpTeFilterSpecLabel Gauge32 } hwRsvpTeFilterSpecNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The number of this Filter_Spec. This is for SNMP Indexing purposes only and has no relation to any protocol value." ::= { hwRsvpTeFilterSpecEntry 1 } hwRsvpTeFilterSpecLspId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A 16-bit identifier used in the SENDER_TEMPLATE and the FILTER_SPEC that can be changed to allow a sender to share resources with itself." ::= { hwRsvpTeFilterSpecEntry 2 } hwRsvpTeFilterSpecIngressLsrId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "IP address for a sender node." ::= { hwRsvpTeFilterSpecEntry 3 } hwRsvpTeFilterSpecLabel OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the label arranged by next hop. A return of 4294967295 indicates the absence of the item." ::= { hwRsvpTeFilterSpecEntry 4 } hwRsvpTeRroTable OBJECT-TYPE SYNTAX SEQUENCE OF HwRsvpTeRroEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describes the RRO sub-objects of an RSVP system." ::= { hwRsvpTeObjects 9 } hwRsvpTeRroEntry OBJECT-TYPE SYNTAX HwRsvpTeRroEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describes the RRO sub-objects of an RSVP system." INDEX { hwRsvpTeSessionNumber, hwRsvpTeSenderNumber, hwRsvpTeRroNumber } ::= { hwRsvpTeRroTable 1 } HwRsvpTeRroEntry ::= SEQUENCE { hwRsvpTeRroNumber Gauge32, hwRsvpTeRroType INTEGER, hwRsvpTeRroIpAddr OCTET STRING, hwRsvpTeRroIpPrefixLen Integer32, hwRsvpTeRroLabel Gauge32, hwRsvpTeRroFlag Integer32 } hwRsvpTeRroNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The number of this RRO sub-object. This is for SNMP Indexing purposes only and has no relation to any protocol value." ::= { hwRsvpTeRroEntry 1 } hwRsvpTeRroType OBJECT-TYPE SYNTAX INTEGER { ipv4(1), ipv6(2), label(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "An enumerable value that indicates the type of this sub-object. (0x01: IPv4 address; 0x02: IPv6 address; 0x03: Label.)" ::= { hwRsvpTeRroEntry 2 } hwRsvpTeRroIpAddr OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "IP address for this sub-object if the type is 'IPv4 address' of 'IPv6 address'. A return of null string indicates the absence of the item." ::= { hwRsvpTeRroEntry 3 } hwRsvpTeRroIpPrefixLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "IP prefix length for this sub-object if the type is 'IPv4 address' of 'IPv6 address'. A return of 0 indicates the absence of the item." ::= { hwRsvpTeRroEntry 4 } hwRsvpTeRroLabel OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the label if the type is 'Label'. A return of 4294967295 indicates the absence of the item." ::= { hwRsvpTeRroEntry 5 } hwRsvpTeRroFlag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "If hwRsvpTeRroType is IPv4 or IPv6, it is a mixed value. (0x01: Local protection available; 0x02: Local protection in use; 0x04: bandwidth protection; 0x08: node protection; 0x10: preemption pending; 0x20: node ID.) If hwRsvpTeRroType is Label, 0x01 means global label. A return of zero indicates no bit was set." ::= { hwRsvpTeRroEntry 6 } hwRsvpTeEroTable OBJECT-TYPE SYNTAX SEQUENCE OF HwRsvpTeEroEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describes the ERO sub-objects of an RSVP system." ::= { hwRsvpTeObjects 10 } hwRsvpTeEroEntry OBJECT-TYPE SYNTAX HwRsvpTeEroEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describes the ERO sub-objects of an RSVP system." INDEX { hwRsvpTeSessionNumber, hwRsvpTeSenderNumber, hwRsvpTeEroNumber } ::= { hwRsvpTeEroTable 1 } HwRsvpTeEroEntry ::= SEQUENCE { hwRsvpTeEroNumber Gauge32, hwRsvpTeEroType INTEGER, hwRsvpTeEroIpAddr OCTET STRING, hwRsvpTeEroIpPrefixLen Integer32 } hwRsvpTeEroNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The number of this ERO sub-object. This is for SNMP Indexing purposes only and has no relation to any protocol value." ::= { hwRsvpTeEroEntry 1 } hwRsvpTeEroType OBJECT-TYPE SYNTAX INTEGER { ipv4(1), ipv6(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "An enumerable value that indicates the type of this sub-object. (0x01: IPv4 address; 0x02: IPv6 address.)" ::= { hwRsvpTeEroEntry 2 } hwRsvpTeEroIpAddr OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "IP address for this sub-object." ::= { hwRsvpTeEroEntry 3 } hwRsvpTeEroIpPrefixLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "IP prefix length for this sub-object." ::= { hwRsvpTeEroEntry 4 } hwRsvpTeExtendObjects OBJECT IDENTIFIER ::= { hwRsvpTeObjects 11 } hwRsvpTeExtendTrap OBJECT IDENTIFIER ::= { hwRsvpTeObjects 12 } hwRsvpTeTrapObjects OBJECT IDENTIFIER ::= { hwRsvpTeExtendTrap 1 } hwRsvpTeNbr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "IP address of RSVP neighbour." ::= { hwRsvpTeTrapObjects 1 } hwRsvpTeTrap OBJECT IDENTIFIER ::= { hwRsvpTeExtendTrap 2 } hwRsvpTeHelloLost NOTIFICATION-TYPE OBJECTS { hwRsvpTeNbr } STATUS current DESCRIPTION "Indicates neighbour of RSVP hello lost." ::= { hwRsvpTeTrap 1 } hwRsvpTeHelloLostRecovery NOTIFICATION-TYPE OBJECTS { hwRsvpTeNbr } STATUS current DESCRIPTION "Indicates neighbour of RSVP hello lost." ::= { hwRsvpTeTrap 2 } hwRsvpTeAuthFail NOTIFICATION-TYPE OBJECTS { hwRsvpTeNbr } STATUS current DESCRIPTION "Indicates neighbour of RSVP hello lost." ::= { hwRsvpTeTrap 3 } hwRsvpTeAuthSuccess NOTIFICATION-TYPE OBJECTS { hwRsvpTeNbr } STATUS current DESCRIPTION "Indicates neighbour of RSVP hello lost." ::= { hwRsvpTeTrap 4 } -- traps hwRsvpTeConformance OBJECT IDENTIFIER ::= { hwRsvpTe 2 } -- conformance information hwRsvpTeGroups OBJECT IDENTIFIER ::= { hwRsvpTeConformance 1 } hwRsvpTeSessionGroup OBJECT-GROUP OBJECTS { hwRsvpTeSessionType, hwRsvpTeSessionDestAddr, hwRsvpTeSessionDestAddrLength, hwRsvpTeSessionSenders, hwRsvpTeSessionReceivers, hwRsvpTeSessionRequests, hwRsvpTeSessionTunnelId, hwRsvpTeSessionTunnelExtId, hwRsvpTeSessionLspsNumber, hwRsvpTeSessionStyle } STATUS current DESCRIPTION "These objects are required for RSVP Systems." ::= { hwRsvpTeGroups 1 } hwRsvpTeSenderGroup OBJECT-GROUP OBJECTS { hwRsvpTeSenderType, hwRsvpTeSenderDestAddr, hwRsvpTeSenderAddr, hwRsvpTeSenderDestAddrLength, hwRsvpTeSenderAddrLength, hwRsvpTeSenderHopAddr, hwRsvpTeSenderHopLih, hwRsvpTeSenderInterface, hwRsvpTeSenderTSpecRate, hwRsvpTeSenderTSpecPeakRate, hwRsvpTeSenderTSpecBurst, hwRsvpTeSenderTSpecMinTu, hwRsvpTeSenderTSpecMaxTu, hwRsvpTeSenderInterval, hwRsvpTeSenderRsvpHop, hwRsvpTeSenderPolicy, hwRsvpTeSenderAdspecBreak, hwRsvpTeSenderAdspecHopCount, hwRsvpTeSenderAdspecPathBw, hwRsvpTeSenderAdspecMinLatency, hwRsvpTeSenderAdspecMtu, hwRsvpTeSenderAdspecGuaranteedSvc, hwRsvpTeSenderAdspecGuaranteedBreak, hwRsvpTeSenderAdspecGuaranteedCtot, hwRsvpTeSenderAdspecGuaranteedDtot, hwRsvpTeSenderAdspecGuaranteedCsum, hwRsvpTeSenderAdspecGuaranteedDsum, hwRsvpTeSenderAdspecGuaranteedHopCount, hwRsvpTeSenderAdspecGuaranteedPathBw, hwRsvpTeSenderAdspecGuaranteedMinLatency, hwRsvpTeSenderAdspecGuaranteedMtu, hwRsvpTeSenderAdspecCtrlLoadSvc, hwRsvpTeSenderAdspecCtrlLoadBreak, hwRsvpTeSenderAdspecCtrlLoadHopCount, hwRsvpTeSenderAdspecCtrlLoadPathBw, hwRsvpTeSenderAdspecCtrlLoadMinLatency, hwRsvpTeSenderAdspecCtrlLoadMtu, hwRsvpTeSenderTtl, hwRsvpTeLspId, hwRsvpTeSenderMsgIdSndFlag, hwRsvpTeSenderMsgIdSndEpoch, hwRsvpTeSenderMsgIdSndNumber, hwRsvpTeSenderMsgIdRcvFlag, hwRsvpTeSenderMsgIdRcvEpoch, hwRsvpTeSenderMsgIdRcvNumber, hwRsvpTeSenderClassType, hwRsvpTeSenderLabelRequestCtype, hwRsvpTeSenderLabelRequestL3pid, hwRsvpTeSenderLabelRequestAtmMinVpi, hwRsvpTeSenderLabelRequestAtmMinVci, hwRsvpTeSenderLabelRequestAtmMaxVpi, hwRsvpTeSenderLabelRequestAtmMaxVci, hwRsvpTeSenderLabelRequestFrMinDlci, hwRsvpTeSenderLabelRequestFrMaxDlci, hwRsvpTeSenderSessionAttrType, hwRsvpTeSenderSessionAttrSetupPrio, hwRsvpTeSenderSessionAttrHoldPrio, hwRsvpTeSenderSessionAttrFlag, hwRsvpTeSenderSessionAttrName, hwRsvpTeSenderSessionAttrExcludeAny, hwRsvpTeSenderSessionAttrIncludeAny, hwRsvpTeSenderSessionAttrIncludeAll, hwRsvpTeSenderFrrSetupPrio, hwRsvpTeSenderFrrHoldPrio, hwRsvpTeSenderFrrHopLimit, hwRsvpTeSenderFrrFlag, hwRsvpTeSenderFrrBandwidth, hwRsvpTeSenderFrrExcludeAny, hwRsvpTeSenderFrrIncludeAny, hwRsvpTeSenderFrrIncludeAll, hwRsvpTeSenderFrrInuseFlag, hwRsvpTeSenderDiffServPsc } STATUS current DESCRIPTION "These objects are required for RSVP Systems." ::= { hwRsvpTeGroups 2 } hwRsvpTeResvGroup OBJECT-GROUP OBJECTS { hwRsvpTeResvType, hwRsvpTeResvDestAddr, hwRsvpTeResvSenderAddr, hwRsvpTeResvDestAddrLength, hwRsvpTeResvSenderAddrLength, hwRsvpTeResvHopAddr, hwRsvpTeResvHopLih, hwRsvpTeResvInterface, hwRsvpTeResvService, hwRsvpTeResvTSpecRate, hwRsvpTeResvTSpecPeakRate, hwRsvpTeResvTSpecBurst, hwRsvpTeResvTSpecMinTu, hwRsvpTeResvTSpecMaxTu, hwRsvpTeResvRSpecRate, hwRsvpTeResvRSpecSlack, hwRsvpTeResvInterval, hwRsvpTeResvScope, hwRsvpTeResvShared, hwRsvpTeResvExplicit, hwRsvpTeResvRsvpHop, hwRsvpTeResvPolicy, hwRsvpTeResvTtl, hwRsvpTeResvConfirm } STATUS current DESCRIPTION "These objects are required for RSVP Systems." ::= { hwRsvpTeGroups 3 } hwRsvpTeResvFwdGroup OBJECT-GROUP OBJECTS { hwRsvpTeResvFwdType, hwRsvpTeResvFwdDestAddr, hwRsvpTeResvFwdSenderAddr, hwRsvpTeResvFwdDestAddrLength, hwRsvpTeResvFwdSenderAddrLength, hwRsvpTeResvFwdHopAddr, hwRsvpTeResvFwdHopLih, hwRsvpTeResvFwdInterface, hwRsvpTeResvFwdService, hwRsvpTeResvFwdTSpecRate, hwRsvpTeResvFwdTSpecPeakRate, hwRsvpTeResvFwdTSpecBurst, hwRsvpTeResvFwdTSpecMinTu, hwRsvpTeResvFwdTSpecMaxTu, hwRsvpTeResvFwdRSpecRate, hwRsvpTeResvFwdRSpecSlack, hwRsvpTeResvFwdInterval, hwRsvpTeResvFwdScope, hwRsvpTeResvFwdShared, hwRsvpTeResvFwdExplicit, hwRsvpTeResvFwdPolicy, hwRsvpTeResvFwdTtl, hwRsvpTeResvFwdMsgIdFlag, hwRsvpTeResvFwdMsgIdEpoch, hwRsvpTeResvFwdMsgIdNumber, hwRsvpTeResvFwdRsvpHop } STATUS current DESCRIPTION "These objects are optional, used for some RSVP Systems." ::= { hwRsvpTeGroups 4 } hwRsvpTeIfGroup OBJECT-GROUP OBJECTS { hwRsvpTeIfUdpNbrs, hwRsvpTeIfIpNbrs, hwRsvpTeIfNbrs, hwRsvpTeIfRefreshBlockadeMultiple, hwRsvpTeIfRefreshMultiple, hwRsvpTeIfTtl, hwRsvpTeIfRefreshInterval, hwRsvpTeIfRouteDelay, hwRsvpTeIfEnabled, hwRsvpTeIfUdpRequired, hwRsvpTeIfStatus, hwRsvpTeIfHelloEnabled, hwRsvpTeIfSrefreshEnabled, hwRsvpTeIfSrefreshInterval, hwRsvpTeIfRetranIncDelta, hwRsvpTeIfRetranInterval, hwRsvpTeIfAuthEnabled, hwRsvpTeIfAuthEncrypted , hwRsvpTeIfAuthHandshake, hwRsvpTeIfAuthKey, hwRsvpTeIfWindowSize, hwRsvpTeIfAuthLifeTime } STATUS current DESCRIPTION "These objects are required for RSVP Systems." ::= { hwRsvpTeGroups 5 } hwRsvpTeNbrGroup OBJECT-GROUP OBJECTS { hwRsvpTeNbrHelloSrcInstance, hwRsvpTeNbrHelloDstInstance, hwRsvpTeNbrHelloLostCounter, hwRsvpTeNbrHelloType, hwRsvpTeNbrHelloEnabled, hwRsvpTeNbrSendersNumber, hwRsvpTeNbrReceiversNumber, hwRsvpTeNbrGrCapability, hwRsvpTeNbrGrRestartTime, hwRsvpTeNbrGrRecoveryTime, hwRsvpTeNbrGrStatus, hwRsvpTeNbrAuthKeyId, hwRsvpTeNbrReductionEnabled, hwRsvpTeNbrReliabilityEnabled, hwRsvpTeNbrProtocol, hwRsvpTeNbrStatus } STATUS current DESCRIPTION "These objects are required for RSVP Systems." ::= { hwRsvpTeGroups 6 } hwRsvpTeMessageIdGroup OBJECT-GROUP OBJECTS { hwRsvpTeMessageIdFlag } STATUS current DESCRIPTION "Description." ::= { hwRsvpTeGroups 7 } hwRsvpTeFilterSpecGroup OBJECT-GROUP OBJECTS { hwRsvpTeFilterSpecLspId , hwRsvpTeFilterSpecIngressLsrId , hwRsvpTeFilterSpecLabel } STATUS current DESCRIPTION "Description." ::= { hwRsvpTeGroups 8 } hwRsvpTeRroGroup OBJECT-GROUP OBJECTS { hwRsvpTeRroType , hwRsvpTeRroIpAddr , hwRsvpTeRroIpPrefixLen , hwRsvpTeRroLabel , hwRsvpTeRroFlag } STATUS current DESCRIPTION "Description." ::= { hwRsvpTeGroups 9 } hwRsvpTeEroGroup OBJECT-GROUP OBJECTS { hwRsvpTeEroType , hwRsvpTeEroIpAddr , hwRsvpTeEroIpPrefixLen } STATUS current DESCRIPTION "Description." ::= { hwRsvpTeGroups 10 } hwRsvpTeTrapObjectsGroup OBJECT-GROUP OBJECTS { hwRsvpTeNbr } STATUS current DESCRIPTION "Description." ::= { hwRsvpTeGroups 11 } hwRsvpTeTrapGroup NOTIFICATION-GROUP NOTIFICATIONS { hwRsvpTeHelloLost, hwRsvpTeHelloLostRecovery, hwRsvpTeAuthFail, hwRsvpTeAuthSuccess } STATUS current DESCRIPTION "Description." ::= { hwRsvpTeGroups 12 } hwRsvpTeCompliances OBJECT IDENTIFIER ::= { hwRsvpTeConformance 2 } -- compliance statements -- this module hwRsvpTeCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement. Note that the im- plementation of this module requires implemen- tation of the Integrated Services MIB as well." MODULE HUAWEI-RSVPTE-MIB MANDATORY-GROUPS { hwRsvpTeSessionGroup, hwRsvpTeSenderGroup, hwRsvpTeResvGroup, hwRsvpTeIfGroup, hwRsvpTeNbrGroup, hwRsvpTeFilterSpecGroup, hwRsvpTeRroGroup, hwRsvpTeEroGroup, hwRsvpTeTrapObjectGroup, hwRsvpTeTrapGroup} GROUP hwRsvpTeResvFwdGroup DESCRIPTION "The Reservation Requests table is appropriate in implementations that store upstream reserva- tion messages, but not appropriate in implemen- tations which calculate them on each transmis- sion." GROUP hwRsvpTeMessageIdGroup DESCRIPTION "This is optional." ::= { hwRsvpTeCompliances 1 } END -- -- HUAWEI-RSVPTE-MIB.mib --