-- -- HUAWEI-SEP-MIBv2.my -- Wednesday, December 02, 2009 at 16:58:09 -- HUAWEI-SEP-MIB DEFINITIONS ::= BEGIN IMPORTS hwDatacomm FROM HUAWEI-MIB EnabledStatus FROM P-BRIDGE-MIB VlanId FROM Q-BRIDGE-MIB OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY, InterfaceIndex, ifName FROM IF-MIB NOTIFICATION-TYPE FROM SNMPv2-SMI RowStatus FROM SNMPv2-TC; -- 1.3.6.1.4.1.2011.5.25.223 hwSepMIB MODULE-IDENTITY LAST-UPDATED "200911171530Z" ORGANIZATION "Huawei Technologies Co.,Ltd." CONTACT-INFO "8090 Team Huawei Technologies Co.,Ltd. Huawei Bld.,NO.3 Xinxi Rd., Shang-Di Information Industry Base, Hai-Dian District Beijing P.R. China http://www.huawei.com Zip:100085 " DESCRIPTION "The private mib file includes the general extent information of the device.hwDatacomm(165).hwSepMIB. " ::= { hwDatacomm 223 } -- -- Node definitions -- -- Node definitions -- -- 1.3.6.1.4.1.2011.5.25.223.1 hwSepObjects OBJECT IDENTIFIER ::= { hwSepMIB 1 } -- 1.3.6.1.4.1.2011.5.25.223.1.1 hwSepResetPktCnt OBJECT-TYPE SYNTAX INTEGER { clear(1), unused(65535) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the packet counter of all running SEP ports. The value of hwSepResetPktCnt is unused(65535) when it is read. The value of hwSepResetPktCnt must be clear(1) when it is set." ::= { hwSepObjects 1 } -- 1.3.6.1.4.1.2011.5.25.223.1.2 hwSepSegmentTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSepSegmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table includes the information of SEP segments." ::= { hwSepObjects 2 } -- 1.3.6.1.4.1.2011.5.25.223.1.2.1 hwSepSegmentEntry OBJECT-TYPE SYNTAX HwSepSegmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table includes the information of SEP segments. The index of the table is SEP segment id." INDEX { hwSepSegmentId } ::= { hwSepSegmentTable 1 } HwSepSegmentEntry ::= SEQUENCE { hwSepSegmentId Integer32, hwSepControlVlanId Integer32, hwSepPreemptManual Integer32, hwSepPreemptDelay Integer32, hwSepBlockPortMode INTEGER, hwSepBlockPortHop Integer32, hwSepBlockPortSysname OCTET STRING, hwSepBlockPortIfname OCTET STRING, hwSepTcNotifySep OCTET STRING, hwSepTcNotifyRrpp EnabledStatus, hwSepTcNotifyStp EnabledStatus, hwSepTcNotifyVpls EnabledStatus, hwSepTcNotifyVll EnabledStatus, hwSepTcNotifySmartLinkCtrlVlan Integer32, hwSepDealSmartLinkFlush EnabledStatus, hwSepProtectedInstanceList OCTET STRING, hwSepTcProtectionInterval Integer32, hwSepSegmentRowStatus RowStatus } -- 1.3.6.1.4.1.2011.5.25.223.1.2.1.1 hwSepSegmentId OBJECT-TYPE SYNTAX Integer32 (1..1024) MAX-ACCESS not-accessible STATUS current DESCRIPTION "SEP segment Identifier." ::= { hwSepSegmentEntry 1 } -- 1.3.6.1.4.1.2011.5.25.223.1.2.1.2 hwSepControlVlanId OBJECT-TYPE SYNTAX Integer32 (0 | 1..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "The control VLAN identifier of the SEP segment. If the value of the object is set 0, the operation is delete configuration." ::= { hwSepSegmentEntry 2 } -- 1.3.6.1.4.1.2011.5.25.223.1.2.1.3 hwSepPreemptManual OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-create STATUS current DESCRIPTION "Trigger the manual preemption by setting the object to be 1. When getting the object it will always be 0." ::= { hwSepSegmentEntry 3 } -- 1.3.6.1.4.1.2011.5.25.223.1.2.1.4 hwSepPreemptDelay OBJECT-TYPE SYNTAX Integer32 (0 | 15..600) MAX-ACCESS read-create STATUS current DESCRIPTION "The preemption delay timer of the SEP segment. If the value of the object is set 0, the operation is delete configuration." ::= { hwSepSegmentEntry 4 } -- 1.3.6.1.4.1.2011.5.25.223.1.2.1.5 hwSepBlockPortMode OBJECT-TYPE SYNTAX INTEGER { optimal(1), middle(2), hop(3), name(4), null(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "The way to choose the port to be blocked. if the value of the object is set 1, the optimal port. if the value of the object is set 2, the middle port. if the value of the object is set 3, the port with the designated hop(hwSepBlockPortHop). if the value of the object is set 4, the port with the designated system name(hwSepBlockPortSysname) and port name(hwSepBlockPortIfname). if the value of the object is set 5, the operation is delete configuration of the block port. BlockPortMode | BlockPortValue | active inactive -----------------------|------------------------------------------------------------------------------ optimal(1) | (1) (2/3/4) middle(2) | (2) (1/3/4) hop(3) | (3)(hwSepBlockPortHop) (1/2/4) name(4) | (4)(hwSepBlockPortSysname & hwSepBlockPortIfname) (1/2/3) " ::= { hwSepSegmentEntry 5 } -- 1.3.6.1.4.1.2011.5.25.223.1.2.1.6 hwSepBlockPortHop OBJECT-TYPE SYNTAX Integer32 (0 | 1..512) MAX-ACCESS read-create STATUS current DESCRIPTION "The hop count of the preffered blocking port. If the value of the object is set 0, the operation is delete configuration. If the mode of block port is not hop(3), the value is not have effect." ::= { hwSepSegmentEntry 6 } -- 1.3.6.1.4.1.2011.5.25.223.1.2.1.7 hwSepBlockPortSysname OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The system name of the preffered blocking port. if not set the value of hwSepBlockPortIfname, this configuration is not take effect. if the mode of block port is not name(4), this configuration is not task effect." ::= { hwSepSegmentEntry 7 } -- 1.3.6.1.4.1.2011.5.25.223.1.2.1.8 hwSepBlockPortIfname OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-create STATUS current DESCRIPTION "The interface name of the preffered blocking port. if not set the value of hwSepBlockPortSysname, this configuration is not take effect. if the mode of block port is not name(4), this configuration is not take effect." ::= { hwSepSegmentEntry 8 } -- 1.3.6.1.4.1.2011.5.25.223.1.2.1.9 hwSepTcNotifySep OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..129)) MAX-ACCESS read-create STATUS current DESCRIPTION "The bitmap of the SEP segments to which the topology change event will be notified " ::= { hwSepSegmentEntry 9 } -- 1.3.6.1.4.1.2011.5.25.223.1.2.1.10 hwSepTcNotifyRrpp OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "If set 1, the topology change event of the SEP segment will be notified to RRPP" ::= { hwSepSegmentEntry 10 } -- 1.3.6.1.4.1.2011.5.25.223.1.2.1.11 hwSepTcNotifyStp OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "If set 1, the topology change event of the SEP segment will be notified to STP" ::= { hwSepSegmentEntry 11 } -- 1.3.6.1.4.1.2011.5.25.223.1.2.1.12 hwSepTcNotifyVpls OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "If set 1, the topology change event of the SEP segment will be notified to VPLS" ::= { hwSepSegmentEntry 12 } -- 1.3.6.1.4.1.2011.5.25.223.1.2.1.13 hwSepTcNotifyVll OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "If set 1, the topology change event of the SEP segment will be notified to VLL" ::= { hwSepSegmentEntry 13 } -- 1.3.6.1.4.1.2011.5.25.223.1.2.1.14 hwSepTcNotifySmartLinkCtrlVlan OBJECT-TYPE SYNTAX Integer32 (0 | 1..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "If set control vlan, the topology change event of the SEP segment will be notified to Smart-Link. If the value of the object is set 0, the operation is delete configuration." ::= { hwSepSegmentEntry 14 } -- 1.3.6.1.4.1.2011.5.25.223.1.2.1.15 hwSepDealSmartLinkFlush OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "If set 1, the SEP segment will deal the smart link flush-FDB packet" ::= { hwSepSegmentEntry 15 } -- 1.3.6.1.4.1.2011.5.25.223.1.2.1.16 hwSepProtectedInstanceList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..512)) MAX-ACCESS read-create STATUS current DESCRIPTION " The protected instance list of the SEP segment" ::= { hwSepSegmentEntry 16 } -- 1.3.6.1.4.1.2011.5.25.223.1.2.1.17 hwSepTcProtectionInterval OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-create STATUS current DESCRIPTION "The interval of tc-protection, the default value is 2." ::= { hwSepSegmentEntry 17 } -- 1.3.6.1.4.1.2011.5.25.223.1.2.1.128 hwSepSegmentRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Operation of CreateAndGo can be used to create a new SEP segment, and operation of Destroy be used to destroy an existent SEP segment." ::= { hwSepSegmentEntry 128 } -- 1.3.6.1.4.1.2011.5.25.223.1.3 hwSepTopologyTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSepTopologyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table includes the information of the topology of the SEP segment." ::= { hwSepObjects 3 } -- 1.3.6.1.4.1.2011.5.25.223.1.3.1 hwSepTopologyEntry OBJECT-TYPE SYNTAX HwSepTopologyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table includes the information of the topology of the SEP segment. The index of the table is the segment identifier and the hop count of the port." INDEX { hwSepSegmentId, hwSepHop } ::= { hwSepTopologyTable 1 } HwSepTopologyEntry ::= SEQUENCE { hwSepHop Integer32, hwSepPortId OCTET STRING, hwSepTopoSysname OCTET STRING, hwSepTopoPortname OCTET STRING, hwSepTopoPortConfigPriority Integer32, hwSepTopoPortActivePriority Integer32, hwSepTopoConfigPortRole Integer32, hwSepTopoActivePortRole Integer32, hwSepTopoPortNbrState INTEGER, hwSepTopoBrotherPortId OCTET STRING, hwSepTopoNbrPortId OCTET STRING, hwSepTopoPortLinkState INTEGER, hwSepTopoPortFwdState INTEGER } -- 1.3.6.1.4.1.2011.5.25.223.1.3.1.1 hwSepHop OBJECT-TYPE SYNTAX Integer32 (1..512) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The hop count of the port." ::= { hwSepTopologyEntry 1 } -- 1.3.6.1.4.1.2011.5.25.223.1.3.1.2 hwSepPortId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "The port identifier. For example: 00.E0.6E.70.23.00.00.00 (hex). The first 6 bytes is the mac address of the device" ::= { hwSepTopologyEntry 2 } -- 1.3.6.1.4.1.2011.5.25.223.1.3.1.3 hwSepTopoSysname OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The system name." ::= { hwSepTopologyEntry 3 } -- 1.3.6.1.4.1.2011.5.25.223.1.3.1.4 hwSepTopoPortname OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The port name." ::= { hwSepTopologyEntry 4 } -- 1.3.6.1.4.1.2011.5.25.223.1.3.1.5 hwSepTopoPortConfigPriority OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The configured port priority.The default value is 64." ::= { hwSepTopologyEntry 5 } -- 1.3.6.1.4.1.2011.5.25.223.1.3.1.6 hwSepTopoPortActivePriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The active port priority." ::= { hwSepTopologyEntry 6 } -- 1.3.6.1.4.1.2011.5.25.223.1.3.1.7 hwSepTopoConfigPortRole OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The configued port role: role value common 0x10 edge secondary 0x21 edge primary 0x22 no neighbor edge secondary 0x31 no neighbor edge primary 0x32" ::= { hwSepTopologyEntry 7 } -- 1.3.6.1.4.1.2011.5.25.223.1.3.1.8 hwSepTopoActivePortRole OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The active port role: role value common 0x10 edge secondary 0x21 edge primary 0x22 no neighbor edge secondary 0x31 no neighbor edge primary 0x32" ::= { hwSepTopologyEntry 8 } -- 1.3.6.1.4.1.2011.5.25.223.1.3.1.9 hwSepTopoPortNbrState OBJECT-TYPE SYNTAX INTEGER { down(1), init(2), preup(3), up(4), conflict(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the neighbor state machine: state value down 1 init 2 preup 3 up 4 conflict 5" ::= { hwSepTopologyEntry 9 } -- 1.3.6.1.4.1.2011.5.25.223.1.3.1.10 hwSepTopoBrotherPortId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "The brother port identifier. For example: 00.E0.6E.70.23.00.00.00 (hex). The first 6 bytes is the mac address of the device" ::= { hwSepTopologyEntry 10 } -- 1.3.6.1.4.1.2011.5.25.223.1.3.1.11 hwSepTopoNbrPortId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "The neighbor port identifier. For example: 00.E0.6E.70.23.00.00.00 (hex). The first 6 bytes is the mac address of the device" ::= { hwSepTopologyEntry 11 } -- 1.3.6.1.4.1.2011.5.25.223.1.3.1.12 hwSepTopoPortLinkState OBJECT-TYPE SYNTAX INTEGER { down(1), up(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The link state of the port: state value link down 1 link up 2" ::= { hwSepTopologyEntry 12 } -- 1.3.6.1.4.1.2011.5.25.223.1.3.1.13 hwSepTopoPortFwdState OBJECT-TYPE SYNTAX INTEGER { discarding(1), forwarding(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The forwarding state of the port: state value discarding 1 forwarding 2" ::= { hwSepTopologyEntry 13 } -- 1.3.6.1.4.1.2011.5.25.223.1.4 hwSepPortTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSepPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table includes the information of SEP ports" ::= { hwSepObjects 4 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1 hwSepPortEntry OBJECT-TYPE SYNTAX HwSepPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table includes the information of SEP ports. The index of the table is SEP segment identifier, port type, port identifier1, port identifier2, port identifier3, port identifier4. If it is an ethernet port including fast ethernet/gigabit ethernet/eth-trunk, the port type is 1, the port identifier1 is the IfIndex of the ethernet port. the other port identifier is for extension and not used currently, should be set 0." INDEX { hwSepSegmentId, hwSepPortType, hwSepPortId1, hwSepPortId2, hwSepPortId3, hwSepPortId4 } ::= { hwSepPortTable 1 } HwSepPortEntry ::= SEQUENCE { hwSepPortType Unsigned32, hwSepPortId1 Unsigned32, hwSepPortId2 Unsigned32, hwSepPortId3 Unsigned32, hwSepPortId4 Unsigned32, hwSepSysname OCTET STRING, hwSepPortname OCTET STRING, hwSepPortConfigPriority Integer32, hwSepPortActivePriority Integer32, hwSepConfigPortRole Integer32, hwSepActivePortRole Integer32, hwSepPortNbrState INTEGER, hwSepNbrPortId OCTET STRING, hwSepPortFwdState INTEGER, hwSepRxNbrPktCnt Integer32, hwSepTxNbrPktCnt Integer32, hwSepRxLsaInfoPktCnt Integer32, hwSepTxLsaInfoPktCnt Integer32, hwSepRxLsaAckPktCnt Integer32, hwSepTxLsaAckPktCnt Integer32, hwSepRxPreemptReqPktCnt Integer32, hwSepTxPreemptReqPktCnt Integer32, hwSepRxPreemptAckPktCnt Integer32, hwSepTxPreemptAckPktCnt Integer32, hwSepRxTcPktCnt Integer32, hwSepTxTcPktCnt Integer32, hwSepRxEpaPktCnt Integer32, hwSepTxEpaPktCnt Integer32, hwSepResetPortPktCnt INTEGER, hwSepPortRowStatus RowStatus } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.1 hwSepPortType OBJECT-TYPE SYNTAX Unsigned32 (1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port type.Currently SEP just support ethernet port and the value is 1." ::= { hwSepPortEntry 1 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.2 hwSepPortId1 OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port identifier1, when the hwSepPortType is 1, the value of the object is the IfIndex of the port." ::= { hwSepPortEntry 2 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.3 hwSepPortId2 OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port identifier2, Currently it is not used and only for extension, should be set 0." ::= { hwSepPortEntry 3 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.4 hwSepPortId3 OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port identifier3, Currently it is not used and only for extension, should be set 0." ::= { hwSepPortEntry 4 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.5 hwSepPortId4 OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port identifier4, Currently it is not used and only for extension, should be set 0." ::= { hwSepPortEntry 5 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.6 hwSepSysname OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The system name." ::= { hwSepPortEntry 6 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.7 hwSepPortname OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The port name" ::= { hwSepPortEntry 7 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.8 hwSepPortConfigPriority OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS read-create STATUS current DESCRIPTION "The configured port priority.The default value is 64." ::= { hwSepPortEntry 8 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.9 hwSepPortActivePriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The active port priority." ::= { hwSepPortEntry 9 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.10 hwSepConfigPortRole OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The configued port role: role value common 0x10 edge secondary 0x21 edge primary 0x22 no neighbor edge secondary 0x31 no neighbor edge primary 0x32" ::= { hwSepPortEntry 10 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.11 hwSepActivePortRole OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The active port role: role value common 0x10 edge secondary 0x21 edge primary 0x22 no neighbor edge secondary 0x31 no neighbor edge primary 0x32" ::= { hwSepPortEntry 11 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.12 hwSepPortNbrState OBJECT-TYPE SYNTAX INTEGER { down(1), init(2), preup(3), up(4), conflict(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the neighbor state machine: state value down 1 init 2 preup 3 up 4 conflict 5" ::= { hwSepPortEntry 12 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.13 hwSepNbrPortId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier of the neighbor port. For example: 00.E0.6E.70.23.00.00.00 (hex) " ::= { hwSepPortEntry 13 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.14 hwSepPortFwdState OBJECT-TYPE SYNTAX INTEGER { discarding(1), forwarding(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The forwarding state of the port: state value discarding 1 forwarding 2" ::= { hwSepPortEntry 14 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.15 hwSepRxNbrPktCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received neighbor packets." ::= { hwSepPortEntry 15 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.16 hwSepTxNbrPktCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmited neighbor packets." ::= { hwSepPortEntry 16 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.17 hwSepRxLsaInfoPktCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received LSA information packets." ::= { hwSepPortEntry 17 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.18 hwSepTxLsaInfoPktCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted LSA information packets." ::= { hwSepPortEntry 18 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.19 hwSepRxLsaAckPktCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received LSA acknowledgement packets." ::= { hwSepPortEntry 19 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.20 hwSepTxLsaAckPktCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted LSA acknowledgement packets." ::= { hwSepPortEntry 20 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.21 hwSepRxPreemptReqPktCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received preemption request packets." ::= { hwSepPortEntry 21 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.22 hwSepTxPreemptReqPktCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted preemption request packets." ::= { hwSepPortEntry 22 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.23 hwSepRxPreemptAckPktCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received preemption acknowledgement packets." ::= { hwSepPortEntry 23 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.24 hwSepTxPreemptAckPktCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted preemption acknowledgement packets." ::= { hwSepPortEntry 24 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.25 hwSepRxTcPktCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received topology change packets." ::= { hwSepPortEntry 25 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.26 hwSepTxTcPktCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted topology change packets." ::= { hwSepPortEntry 26 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.27 hwSepRxEpaPktCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received topology change packets." ::= { hwSepPortEntry 27 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.28 hwSepTxEpaPktCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted topology change packets." ::= { hwSepPortEntry 28 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.29 hwSepResetPortPktCnt OBJECT-TYPE SYNTAX INTEGER { clear(1), unused(65535) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the packet counter of the port in the SEP segment. The value of hwSepResetPktCnt is unused(65535) when it is read. The value of hwSepResetPktCnt must be clear(1) when it is set." ::= { hwSepPortEntry 29 } -- 1.3.6.1.4.1.2011.5.25.223.1.4.1.128 hwSepPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Operation of CreateAndGo can be used to have a port join the SEP segment. and operation of Destroy be used to have a port leave the SEP segment." ::= { hwSepPortEntry 128 } -- 1.3.6.1.4.1.2011.5.25.223.2 hwSepGroups OBJECT IDENTIFIER ::= { hwSepMIB 2 } -- 1.3.6.1.4.1.2011.5.25.223.2.1 hwSepGlobalInfoGroup OBJECT-GROUP OBJECTS { hwSepResetPktCnt } STATUS current DESCRIPTION "The group of global information." ::= { hwSepGroups 1 } -- 1.3.6.1.4.1.2011.5.25.223.2.2 hwSepSegmentInfoGroup OBJECT-GROUP OBJECTS { hwSepSegmentId, hwSepControlVlanId, hwSepPreemptManual, hwSepPreemptDelay, hwSepBlockPortMode, hwSepBlockPortHop, hwSepBlockPortSysname, hwSepBlockPortIfname, hwSepTcNotifySep, hwSepTcNotifyRrpp, hwSepTcNotifyStp, hwSepTcNotifyVpls, hwSepTcNotifyVll, hwSepTcNotifySmartLinkCtrlVlan, hwSepDealSmartLinkFlush, hwSepProtectedInstanceList, hwSepTcProtectionInterval, hwSepSegmentRowStatus } STATUS current DESCRIPTION "The group of segment information." ::= { hwSepGroups 2 } -- 1.3.6.1.4.1.2011.5.25.223.2.3 hwSepPortInfoGroup OBJECT-GROUP OBJECTS { hwSepPortType, hwSepPortId1, hwSepPortId2, hwSepPortId3, hwSepPortId4, hwSepSysname, hwSepPortname, hwSepPortConfigPriority, hwSepPortActivePriority, hwSepConfigPortRole, hwSepActivePortRole, hwSepPortNbrState, hwSepNbrPortId, hwSepPortFwdState, hwSepRxNbrPktCnt, hwSepTxNbrPktCnt, hwSepRxLsaInfoPktCnt, hwSepTxLsaInfoPktCnt, hwSepRxLsaAckPktCnt, hwSepTxLsaAckPktCnt, hwSepRxPreemptReqPktCnt, hwSepTxPreemptReqPktCnt, hwSepRxPreemptAckPktCnt, hwSepTxPreemptAckPktCnt, hwSepRxTcPktCnt, hwSepTxTcPktCnt, hwSepRxEpaPktCnt, hwSepTxEpaPktCnt, hwSepResetPortPktCnt, hwSepPortRowStatus } STATUS current DESCRIPTION "The group of port information." ::= { hwSepGroups 3 } -- 1.3.6.1.4.1.2011.5.25.223.2.4 hwSepTopologyInfoGroup OBJECT-GROUP OBJECTS { hwSepHop, hwSepPortId, hwSepTopoSysname, hwSepTopoPortname, hwSepTopoPortConfigPriority, hwSepTopoPortActivePriority, hwSepTopoConfigPortRole, hwSepTopoActivePortRole, hwSepTopoPortNbrState, hwSepTopoNbrPortId, hwSepTopoPortLinkState, hwSepTopoPortFwdState, hwSepTopoBrotherPortId } STATUS current DESCRIPTION "The group of topology information." ::= { hwSepGroups 4 } END -- -- HUAWEI-SEP-MIBv2.my --