-- ============================================================================ -- Copyright (C) 2007 by HUAWEI TECHNOLOGIES. All rights reserved. -- -- Description: HUAWEI-PIM-STD-MIB.my , this MIB module for management of -- the Protocol Independent Multicast (PIM) protocols for PIM routers. -- Reference: -- Version: V1.0 -- History: -- created by wangyanwei 63315 2007-04-24 -- -- ============================================================================ HUAWEI-PIM-STD-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, mib-2, NOTIFICATION-TYPE, Unsigned32, Counter32, Counter64, Gauge32, TimeTicks FROM SNMPv2-SMI -- [RFC2578] TimeStamp FROM SNMPv2-TC -- [Add by yuyunfu 54617] TEXTUAL-CONVENTION, RowStatus, TruthValue, DisplayString, StorageType FROM SNMPv2-TC -- [RFC2579] MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF -- [RFC2580] InterfaceIndexOrZero, InterfaceIndex FROM IF-MIB -- [RFC2863] InetAddressType, InetAddressPrefixLength, InetAddress, InetVersion FROM INET-ADDRESS-MIB -- [RFC4001] IANAipRouteProtocol FROM IANA-RTPROTO-MIB -- [RTPROTO] hwDatacomm FROM HUAWEI-MIB; hwMcast OBJECT IDENTIFIER ::= { hwDatacomm 149 } hwPimStdMib MODULE-IDENTITY LAST-UPDATED "200704240000Z" -- 24 April 2007 ORGANIZATION "Huawei Technologies co.,Ltd." CONTACT-INFO " R&D BeiJing, Huawei Technologies co.,Ltd. Huawei Bld.,NO.3 Xinxi Rd., Shang-Di Information Industry Base, Hai-Dian District Beijing P.R. China Zip:100085 Http://www.huawei.com E-mail:support@huawei.com " DESCRIPTION "The MIB module for management of PIM routers. Huawei Technologies co.,Ltd . Supplementary information may be available at: http://www.huawei.com" REVISION "200704240000Z" -- 24 April 2007 DESCRIPTION "The initial revision of this Mib module." ::= { hwMcast 4 } HWPimMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The PIM mode in which a group is operating. none(1) The group is not using PIM, which may be the case if, for example, it is a link-local or unroutable group address. ssm(2) Source-Specific Multicast (SSM) with PIM Sparse Mode. asm(3) Any Source Multicast (ASM), with PIM Sparse Mode. bidir(4) Bi-directional PIM. dm(5) PIM Dense Mode. other(6) Any other PIM mode." SYNTAX INTEGER { none(1), ssm(2), asm(3), bidir(4), dm(5), other(6) } HWPimGroupMappingOriginType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The mechanism by which a PIM group mapping was learned. fixed(1) Link-local or unroutable group mappings. configRp(2) Local static RP configuration. configSsm(3) Local SSM Group configuration. bsr(4) The PIM Bootstrap Router (BSR) mechanism. autoRp(5) Cisco's Auto-RP mechanism. embedded(6) The Embedded-RP mechanism where the RP address is embedded in the multicast group address. other(7) Any other mechanism." REFERENCE "RFC 3596, RFC 3956 and I-D.ietf-pim-sm-bsr" SYNTAX INTEGER { fixed(1), configRp(2), configSsm(3), bsr(4), autoRp(5), embedded(6), other(7) } HWPimCtlMsgState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The PIM control message state. recv(1) The PIM control message has been received. sent(2) The PIM control message has been sent. invalid(3) The invalid PIM control message has been received. filter(4) The PIM control message has been filtered." SYNTAX INTEGER { recv(1), sent(2), invalid(3), filter(4) } hwPimNotifications OBJECT IDENTIFIER ::= { hwPimStdMib 0 } hwPim OBJECT IDENTIFIER ::= { hwPimStdMib 1 } hwPimKeepalivePeriod OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The duration of the Keepalive Timer. This is the period during which the PIM router will maintain (S,G) state in the absence of explicit (S,G) local membership or (S,G) join messages received to maintain it. This timer period is called the Keepalive_Period in the PIM-SM specification. It is called the SourceLifetime in the PIM-DM specification. The storage type of this object is determined by hwPimDeviceConfigStorageType. DEFVAL { 210 }" REFERENCE "RFC 4601 section 4.11" ::= { hwPim 14 } hwPimRegisterSuppressionTime OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The duration of the Register Suppression Timer. This is the period during which a PIM Designated Router (DR) stops sending Register-encapsulated data to the Rendezvous Point (RP) after receiving a Register-Stop message. This object is used to run timers both at the DR and at the RP. This timer period is called the Register_Suppression_Time in the PIM-SM specification. The storage type of this object is determined by hwPimDeviceConfigStorageType. DEFVAL { 60 }" REFERENCE "RFC 4601 section 4.11" ::= { hwPim 15 } hwPimStarGEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in the hwPimStarGTable." ::= { hwPim 16 } hwPimStarGIEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in the hwPimStarGITable." ::= { hwPim 17 } hwPimSGEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in the hwPimSGTable." ::= { hwPim 18 } hwPimSGIEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in the hwPimSGITable." ::= { hwPim 19 } hwPimSGRptEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in the hwPimSGRptTable." ::= { hwPim 20 } hwPimSGRptIEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in the hwPimSGRptITable." ::= { hwPim 21 } hwPimOutAsserts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Asserts sent by this router. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example when the device is rebooted." REFERENCE "RFC 4601 section 4.6" ::= { hwPim 22 } hwPimInAsserts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Asserts received by this router. Asserts are multicast to all routers on a network. This counter is incremented by all routers that receive an assert, not only those routers that are contesting the assert. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example when the device is rebooted." REFERENCE "RFC 4601 section 4.6" ::= { hwPim 23 } hwPimLastAssertInterface OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The interface on which this router most recently sent or received an assert, or zero if this router has not sent or received an assert." REFERENCE "RFC 4601 section 4.6" ::= { hwPim 24 } hwPimLastAssertGroupAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of the multicast group address in the most recently sent or received assert. If this router has not sent or received an assert then this object is set to unknown(0)." ::= { hwPim 25 } hwPimLastAssertGroupAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The multicast group address in the most recently sent or received assert. The InetAddressType is given by the hwPimLastAssertGroupAddressType object." ::= { hwPim 26 } hwPimLastAssertSourceAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of the multicast source address in the most recently sent or received assert. If the most recent assert was (*,G), or if this router has not sent or received an assert, then this object is set to unknown(0)." ::= { hwPim 27 } hwPimLastAssertSourceAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The multicast source address in the most recently sent or received assert. The InetAddressType is given by the hwPimLastAssertSourceAddressType object." ::= { hwPim 28 } hwPimNeighborLossNotificationPeriod OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum time that must elapse between hwPimNeighborLoss notifications originated by this router. The maximum value 65535 represents an 'infinite' time, in which case no hwPimNeighborLoss notifications are ever sent. The storage type of this object is determined by hwPimDeviceConfigStorageType. DEFVAL { 0 }" ::= { hwPim 29 } hwPimNeighborLossCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of neighbor loss events that have occurred. This counter is incremented when the neighbor timer expires. This counter is incremented whenever a hwPimNeighborLoss notification would be generated. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example when the device is rebooted." REFERENCE "RFC 4601 section 4.3.2" ::= { hwPim 30 } hwPimInvalidRegisterNotificationPeriod OBJECT-TYPE SYNTAX Unsigned32 (10..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum time that must elapse between hwPimInvalidRegister notifications originated by this router. The default value of 65535 represents an 'infinite' time, in which case no hwPimInvalidRegister notifications are ever sent. The non-zero minimum allowed value provides resilience against propagation of denial-of-service attacks from the data and control planes to the network management plane. The storage type of this object is determined by hwPimDeviceConfigStorageType. DEFVAL { 65535 }" ::= { hwPim 31 } hwPimInvalidRegisterMsgsRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of invalid PIM Register messages that have been received by this device. A PIM Register message is invalid if either o the destination address of the Register message does not match the Group to RP mapping on this device, or o this device believes the group address to be within an SSM address range, but this Register implies ASM usage. These conditions can occur transiently while RP mapping changes propagate through the network. If this counter is incremented repeatedly over several minutes, then there is a persisting configuration error that requires correction. The active Group to RP mapping on this device is specified by the object hwPimGroupMappingPimMode. If there is no such mapping, then the object hwPimGroupMappingPimMode is absent. The RP address contained in the invalid Register is hwPimInvalidRegisterRp. Multicast data carried by invalid Register messages is discarded. The discarded data is from a source directly connected to hwPimInvalidRegisterOrigin, and is addressed to hwPimInvalidRegisterGroup. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example when the device is rebooted." REFERENCE "RFC 4601 section 4.4.2, RFC 3569 and I-D.ietf-mboned-ip-mcast-mib ipMcastSsmRangeTable" ::= { hwPim 32 } hwPimInvalidRegisterAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type stored in hwPimInvalidRegisterOrigin, hwPimInvalidRegisterGroup and hwPimInvalidRegisterRp. If no unexpected Register messages have been received, then this object is set to unknown(0)." ::= { hwPim 33 } hwPimInvalidRegisterOrigin OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The source address of the last unexpected Register message received by this device." ::= { hwPim 34 } hwPimInvalidRegisterGroup OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IP multicast group address to which the last unexpected Register message received by this device was addressed." ::= { hwPim 35 } hwPimInvalidRegisterRp OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The RP address to which the last unexpected Register message received by this device was delivered." ::= { hwPim 36 } hwPimInvalidJoinPruneNotificationPeriod OBJECT-TYPE SYNTAX Unsigned32 (10..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum time that must elapse between hwPimInvalidJoinPrune notifications originated by this router. The default value of 65535 represents an 'infinite' time, in which case no hwPimInvalidJoinPrune notifications are ever sent. The non-zero minimum allowed value provides resilience against propagation of denial-of-service attacks from the control plane to the network management plane. The storage type of this object is determined by hwPimDeviceConfigStorageType. DEFVAL { 65535 }" ::= { hwPim 37 } hwPimInvalidJoinPruneMsgsRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of invalid PIM Join/Prune messages that have been received by this device. A PIM Join/Prune message is invalid if either o the Group to RP mapping specified by this message does not match the Group to RP mapping on this device, or o this device believes the group address to be within an SSM address range, but this Join/Prune (*,G) or (S,G,rpt) implies ASM usage. These conditions can occur transiently while RP mapping changes propagate through the network. If this counter is incremented repeatedly over several minutes, then there is a persisting configuration error that requires correction. The active Group to RP mapping on this device is specified by the object hwPimGroupMappingPimMode. If there is no such mapping, then the object hwPimGroupMappingPimMode is absent. The RP address contained in the invalid Join/Prune is hwPimInvalidJoinPruneRp. Invalid Join/Prune messages are discarded. This may result in loss of multicast data affecting listeners downstream of hwPimInvalidJoinPruneOrigin, for multicast data addressed to hwPimInvalidJoinPruneGroup. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example when the device is rebooted." REFERENCE "RFC 4601 section 4.5.2, RFC 3569 and I-D.ietf-mboned-ip-mcast-mib ipMcastSsmRangeTable" ::= { hwPim 38 } hwPimInvalidJoinPruneAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type stored in hwPimInvalidJoinPruneOrigin, hwPimInvalidJoinPruneGroup and hwPimInvalidJoinPruneRp. If no unexpected Join/Prune messages have been received, this object is set to unknown(0)." ::= { hwPim 39 } hwPimInvalidJoinPruneOrigin OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The source address of the last unexpected Join/Prune message received by this device." ::= { hwPim 40 } hwPimInvalidJoinPruneGroup OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IP multicast group address carried in the last unexpected Join/Prune message received by this device." ::= { hwPim 41 } hwPimInvalidJoinPruneRp OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The RP address carried in the last unexpected Join/Prune message received by this device." ::= { hwPim 42 } hwPimRpMappingNotificationPeriod OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum time that must elapse between hwPimRpMappingChange notifications originated by this router. The default value of 65535 represents an 'infinite' time, in which case no hwPimRpMappingChange notifications are ever sent. The storage type of this object is determined by hwPimDeviceConfigStorageType. DEFVAL { 65535 }" ::= { hwPim 43 } hwPimRpMappingChangeCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of changes to active RP mappings on this device. Information about active RP mappings is available in hwPimGroupMappingTable. Only changes to active mappings cause this counter to be incremented. That is, changes that modify the hwPimGroupMappingEntry with the highest precedence for a group (lowest value of hwPimGroupMappingPrecedence). Such changes may result from manual configuration of this device, or from automatic RP mapping discovery methods including the PIM Bootstrap Router (BSR) mechanism. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example when the device is rebooted." REFERENCE "I-D.ietf-pim-sm-bsr" ::= { hwPim 44 } hwPimInterfaceElectionNotificationPeriod OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum time that must elapse between hwPimInterfaceElection notifications originated by this router. The default value of 65535 represents an 'infinite' time, in which case no hwPimInterfaceElection notifications are ever sent. The storage type of this object is determined by hwPimDeviceConfigStorageType. DEFVAL { 65535 }" ::= { hwPim 45 } hwPimInterfaceElectionWinCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this device has been elected DR or DF on any interface. Elections occur frequently on newly-active interfaces, as triggered Hellos establish adjacencies. This counter is not incremented for elections on an interface until the first periodic Hello has been sent. If this router is the DR or DF at the time of sending the first periodic Hello after interface activation, then this counter is incremented (once) at that time. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example when the device is rebooted." REFERENCE "RFC 4601 section 4.3.2 and I-D.ietf-pim-bidir section 3.5.2" ::= { hwPim 46 } hwPimRefreshInterval OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The interval between successive State Refresh messages sent by an Originator. This timer period is called the RefreshInterval in the PIM-DM specification. This object is used only by PIM-DM. The storage type of this object is determined by hwPimDeviceConfigStorageType. DEFVAL { 60 }" REFERENCE "RFC 3973 section 4.8" ::= { hwPim 47 } hwPimDeviceConfigStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-write STATUS current DESCRIPTION "The storage type used for the global PIM configuration of this device, comprised of the objects listed below. If this storage type takes the value 'permanent', write-access to the listed objects need not be allowed. The objects described by this storage type are: hwPimKeepalivePeriod, hwPimRegisterSuppressionTime, hwPimNeighborLossNotificationPeriod, hwPimInvalidRegisterNotificationPeriod, hwPimInvalidJoinPruneNotificationPeriod, hwPimRpMappingNotificationPeriod, hwPimInterfaceElectionNotificationPeriod, hwPimRefreshInterval, hwPimNeighborAddNotificationPeriod. DEFVAL { nonVolatile }" ::= { hwPim 48 } hwPimNeighborAddCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of new neighbor found events that have occurred. This counter is incremented when the new neighbor is come up. This counter is incremented whenever a hwPimNeighborLoss notification would be generated. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example when the device is rebooted." REFERENCE "RFC 4601 section 4.3.2" ::= { hwPim 49 } hwPimNeighborAddNotificationPeriod OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum time that must elapse between hwPimNeighborAdd notifications originated by this router. The maximum value 65535 represents an 'infinite' time, in which case no hwPimNeighborAdd notifications are ever sent. The storage type of this object is determined by hwPimDeviceConfigStorageType. DEFVAL { 0 }" ::= { hwPim 50 } hwPimGRStartTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The time when PIM entered GR state." ::= { hwPim 51 } hwPimGRInterval OBJECT-TYPE SYNTAX Unsigned32 (90..3600) MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The minimum PIM GR period. DEFVAL { 120 }" ::= { hwPim 52 } hwPimGREndTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The time when PIM left the GR state." ::= { hwPim 53 } hwPimMrtLimitAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The address type of the multicast group address." ::= { hwPim 54 } hwPimMrtLimitSource OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The source address of the entry." ::= { hwPim 55 } hwPimMrtLimitGroup OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The group address of the entry." ::= { hwPim 56 } hwPimInstanceID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The Instance ID of the trap." ::= { hwPim 57 } hwPimInstanceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The instance name of the trap." ::= { hwPim 60 } hwPimNeighborNotificationReason OBJECT-TYPE SYNTAX INTEGER { holdTimeExpired(1), notReceiveHelloForALongTime(2), interfaceIsDown(3), receiveHelloAgain(4), neighbourIsDeleted(5), alarmTimeOut(6), receiveHelloHoldTimeZero(7), bfdSessionDown(8), userOperation(9), alarmClear(100) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The reason for trap sending: 1:holdTime expired; 2:Not receive hello for a long time; 3:Interface is down; 4:Receive Hello again; 5:neighbour is deleted; 6:Alarm time out; 7:Receive Hello HoldTime is Zero; 8:Bfd Session is Down; 9:User Operation; 100:Alarm Clear" ::= { hwPim 61 } hwPimInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPimInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the router's PIM interfaces. PIM is enabled on all interfaces listed in this table." ::= { hwPim 1 } hwPimInterfaceEntry OBJECT-TYPE SYNTAX HwPimInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the hwPimInterfaceTable. This entry is preserved on agent restart." INDEX { hwPimInterfaceIfIndex, hwPimInterfaceIpVersion } ::= { hwPimInterfaceTable 1 } HwPimInterfaceEntry ::= SEQUENCE { hwPimInterfaceIfIndex InterfaceIndex, hwPimInterfaceIpVersion InetVersion, hwPimInterfaceAddressType InetAddressType, hwPimInterfaceAddress InetAddress, hwPimInterfaceGenerationIdValue Unsigned32, hwPimInterfaceDr InetAddress, hwPimInterfaceDrPriority Unsigned32, hwPimInterfaceDrPriorityEnabled TruthValue, hwPimInterfaceHelloInterval Unsigned32, hwPimInterfaceTrigHelloInterval Unsigned32, hwPimInterfaceHelloHoldtime Unsigned32, hwPimInterfaceJoinPruneInterval Unsigned32, hwPimInterfaceJoinPruneHoldtime Unsigned32, hwPimInterfaceDfElectionRobustness Unsigned32, hwPimInterfaceLanDelayEnabled TruthValue, hwPimInterfacePropagationDelay Unsigned32, hwPimInterfaceOverrideInterval Unsigned32, hwPimInterfaceEffectPropagDelay Unsigned32, hwPimInterfaceEffectOverrideIvl Unsigned32, hwPimInterfaceSuppressionEnabled TruthValue, hwPimInterfaceBidirCapable TruthValue, hwPimInterfaceDomainBorder TruthValue, hwPimInterfaceStubInterface TruthValue, hwPimInterfacePruneLimitInterval Unsigned32, hwPimInterfaceGraftRetryInterval Unsigned32, hwPimInterfaceSrPriorityEnabled TruthValue, hwPimInterfaceStatus RowStatus, hwPimInterfaceStorageType StorageType, hwPimInterfaceName DisplayString } hwPimInterfaceIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of this PIM interface." ::= { hwPimInterfaceEntry 1 } hwPimInterfaceIpVersion OBJECT-TYPE SYNTAX InetVersion MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP version of this PIM interface. A physical interface may be configured in multiple modes concurrently, e.g. IPv4 and IPv6, however the traffic is considered to be logically separate." ::= { hwPimInterfaceEntry 2 } hwPimInterfaceAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of this PIM interface." ::= { hwPimInterfaceEntry 3 } hwPimInterfaceAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The primary IP address of this router on this PIM interface. The InetAddressType is given by the hwPimInterfaceAddressType object." REFERENCE "RFC 4601 sections 4.1.6, 4.3.1-4.3.4 and 4.5.1" ::= { hwPimInterfaceEntry 4 } hwPimInterfaceGenerationIdValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the Generation ID this router inserted in the last PIM Hello message it sent on this interface." REFERENCE "RFC 4601 section 4.3.1" ::= { hwPimInterfaceEntry 5 } hwPimInterfaceDr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The primary IP address of the Designated Router on this PIM interface. The InetAddressType is given by the hwPimInterfaceAddressType object." REFERENCE "RFC 4601 section 4.3" ::= { hwPimInterfaceEntry 6 } hwPimInterfaceDrPriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The Designated Router Priority value inserted into the DR Priority option on this interface. Numerically higher values for this object indicate higher priorities." REFERENCE "RFC 4601 section 4.3.2" DEFVAL { 1 } ::= { hwPimInterfaceEntry 7 } hwPimInterfaceDrPriorityEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if all routers on this interface are using the DR Priority option." REFERENCE "RFC 4601 section 4.3.2" ::= { hwPimInterfaceEntry 8 } hwPimInterfaceHelloInterval OBJECT-TYPE SYNTAX Unsigned32 (0..18000) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The frequency at which PIM Hello messages are transmitted on this interface. This object corresponds to the 'Hello_Period' timer value defined in the PIM-SM specification. A value of zero represents an 'infinite' interval, and indicates that periodic PIM Hello messages should not be sent on this interface." REFERENCE "RFC 4601 section 9" DEFVAL { 30 } ::= { hwPimInterfaceEntry 9 } hwPimInterfaceTrigHelloInterval OBJECT-TYPE SYNTAX Unsigned32 (0..60) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum time before this router sends a triggered PIM Hello message on this interface. This object corresponds to the 'Trigered_Hello_Delay' timer value defined in the PIM-SM specification. A value of zero has no special meaning and indicates that triggered PIM Hello messages should always be sent immediately." REFERENCE "RFC 4601 section 4.11" DEFVAL { 5 } ::= { hwPimInterfaceEntry 10 } hwPimInterfaceHelloHoldtime OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value set in the Holdtime field of PIM Hello messages transmitted on this interface. A value of 65535 represents an 'infinite' holdtime. Implementations are recommended to use a holdtime that is 3.5 times the value of hwPimInterfaceHelloInterval, or 65535 if hwPimInterfaceHelloInterval is set to zero." REFERENCE "RFC 4601 sections 4.3.2 and 4.9.2" DEFVAL { 105 } ::= { hwPimInterfaceEntry 11 } hwPimInterfaceJoinPruneInterval OBJECT-TYPE SYNTAX Unsigned32 (0..18000) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The frequency at which this router sends PIM Join/Prune messages on this PIM interface. This object corresponds to the 't_periodic' timer value defined in the PIM-SM specification. A value of zero represents an 'infinite' interval, and indicates that periodic PIM Join/Prune messages should not be sent on this interface." REFERENCE "RFC 4601 section 4.11" DEFVAL { 60 } ::= { hwPimInterfaceEntry 12 } hwPimInterfaceJoinPruneHoldtime OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value inserted into the Holdtime field of a PIM Join/Prune message sent on this interface. A value of 65535 represents an 'infinite' holdtime. Implementations are recommended to use a holdtime that is 3.5 times the value of hwPimInterfaceJoinPruneInterval, or 65535 if hwPimInterfaceJoinPruneInterval is set to zero. PIM-DM implementations are recommended to use the value of hwPimInterfacePruneLimitInterval." REFERENCE "RFC 4601 sections 4.5.3 and 4.9.5" DEFVAL { 210 } ::= { hwPimInterfaceEntry 13 } hwPimInterfaceDfElectionRobustness OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum number of PIM DF-Election messages that must be lost in order for DF election on this interface to fail." DEFVAL { 3 } ::= { hwPimInterfaceEntry 14 } hwPimInterfaceLanDelayEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if all routers on this interface are using the LAN Prune Delay option." REFERENCE "RFC 4601 sections 4.3.3 and 4.9.2" ::= { hwPimInterfaceEntry 15 } hwPimInterfacePropagationDelay OBJECT-TYPE SYNTAX Unsigned32 (0..32767) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The expected propagation delay between PIM routers on this network or link. This router inserts this value into the Propagation_Delay field of the LAN Prune Delay option in the PIM Hello messages sent on this interface. Implementations should enforce a lower bound on the permitted values for this object to allow for scheduling and processing delays within the local router." DEFVAL { 500 } ::= { hwPimInterfaceEntry 16 } hwPimInterfaceOverrideInterval OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value this router inserts into the Override_Interval field of the LAN Prune Delay option in the PIM Hello messages it sends on this interface. When overriding a prune, PIM routers pick a random timer duration up to the value of this object. The more PIM routers that are active on a network, the more likely it is that the prune will be overridden after a small proportion of this time has elapsed. The more PIM routers are active on this network, the larger this object should be to obtain an optimal spread of prune override latencies." REFERENCE "RFC 4601 section 4.3.3" DEFVAL { 2500 } ::= { hwPimInterfaceEntry 17 } hwPimInterfaceEffectPropagDelay OBJECT-TYPE SYNTAX Unsigned32 (0..32767) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The Effective Propagation Delay on this interface. This object is always 500 if hwPimInterfaceLanDelayEnabled is FALSE." REFERENCE "RFC 4601 section 4.3.3" ::= { hwPimInterfaceEntry 18 } hwPimInterfaceEffectOverrideIvl OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The Effective Override Interval on this interface. This object is always 2500 if hwPimInterfaceLanDelayEnabled is FALSE." REFERENCE "RFC 4601 section 4.3.3" ::= { hwPimInterfaceEntry 19 } hwPimInterfaceSuppressionEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether join suppression is enabled on this interface. This object is always TRUE if hwPimInterfaceLanDelayEnabled is FALSE." REFERENCE "RFC 4601 section 4.3.3" ::= { hwPimInterfaceEntry 20 } hwPimInterfaceBidirCapable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if all routers on this interface are using the Bidirectional-PIM Capable option." REFERENCE "I-D.ietf-pim-bidir section 3.2 and 3.7.4" ::= { hwPimInterfaceEntry 21 } hwPimInterfaceDomainBorder OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Whether or not this interface is a PIM domain border. This includes acting as a border for PIM Bootstrap Router (BSR) messages, if the BSR mechanism is in use." DEFVAL { false } ::= { hwPimInterfaceEntry 22 } hwPimInterfaceStubInterface OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Whether this interface is a 'stub interface'. If this object is set to TRUE, then no PIM packets are sent out this interface, and any received PIM packets are ignored. Setting this object to TRUE is a security measure for interfaces towards untrusted hosts. This allows an interface to be configured for use with IGMP (Internet Group Management Protocol) or MLD (Multicast Listener Discovery) only, which protects the PIM router from forged PIM messages on the interface. To communicate with other PIM routers using this interface, this object must remain set to FALSE. Changing the value of this object while the interface is operational causes the interface to be deactivated and then reactivated." REFERENCE "RFC 3376, RFC 3810" DEFVAL { false } ::= { hwPimInterfaceEntry 23 } hwPimInterfacePruneLimitInterval OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum interval that must transpire between two successive Prunes sent by a router. This object corresponds to the 't_limit' timer value defined in the PIM-DM specification. This object is used only by PIM-DM." REFERENCE "RFC 3973 section 4.8" DEFVAL { 60 } ::= { hwPimInterfaceEntry 24 } hwPimInterfaceGraftRetryInterval OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum interval that must transpire between two successive Grafts sent by a router. This object corresponds to the 'Graft_Retry_Period' timer value defined in the PIM-DM specification. This object is used only by PIM-DM." REFERENCE "RFC 3973 section 4.8" DEFVAL { 3 } ::= { hwPimInterfaceEntry 25 } hwPimInterfaceSrPriorityEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if all routers on this interface are using the State Refresh option. This object is used only by PIM-DM." ::= { hwPimInterfaceEntry 26 } hwPimInterfaceStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this entry. Creating the entry enables PIM on the interface; destroying the entry disables PIM on the interface. This status object can be set to active(1) without setting any other columnar objects in this entry. All writeable objects in this entry can be modified when the status of this entry is active(1)." ::= { hwPimInterfaceEntry 27 } hwPimInterfaceStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this row. Rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { hwPimInterfaceEntry 28 } hwPimInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..64)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The name of this PIM interface." ::= { hwPimInterfaceEntry 29 } hwPimNeighborTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPimNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the router's PIM neighbors." ::= { hwPim 2 } hwPimNeighborEntry OBJECT-TYPE SYNTAX HwPimNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the hwPimNeighborTable." INDEX { hwPimNeighborIfIndex, hwPimNeighborAddressType, hwPimNeighborAddress } ::= { hwPimNeighborTable 1 } HwPimNeighborEntry ::= SEQUENCE { hwPimNeighborIfIndex InterfaceIndex, hwPimNeighborAddressType InetAddressType, hwPimNeighborAddress InetAddress, hwPimNeighborGenerationIdPresent TruthValue, hwPimNeighborGenerationIdValue Unsigned32, hwPimNeighborUpTime TimeTicks, hwPimNeighborExpiryTime TimeTicks, hwPimNeighborDrPriorityPresent TruthValue, hwPimNeighborDrPriority Unsigned32, hwPimNeighborLanPruneDelayPresent TruthValue, hwPimNeighborTBit TruthValue, hwPimNeighborPropagationDelay Unsigned32, hwPimNeighborOverrideInterval Unsigned32, hwPimNeighborBidirCapable TruthValue, hwPimNeighborSrCapable TruthValue, hwPimNeighborIfName DisplayString } hwPimNeighborIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of ifIndex for the interface used to reach this PIM neighbor." ::= { hwPimNeighborEntry 1 } hwPimNeighborAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of this PIM neighbor." ::= { hwPimNeighborEntry 2 } hwPimNeighborAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The primary IP address of this PIM neighbor. The InetAddressType is given by the hwPimNeighborAddressType object." ::= { hwPimNeighborEntry 3 } hwPimNeighborGenerationIdPresent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if this neighbor is using the Generation ID option." REFERENCE "RFC 4601 section 4.3.1" ::= { hwPimNeighborEntry 4 } hwPimNeighborGenerationIdValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the Generation ID from the last PIM Hello message received from this neighbor. This object is always zero if hwPimNeighborGenerationIdPresent is FALSE." REFERENCE "RFC 4601 section 4.3.1" ::= { hwPimNeighborEntry 5 } hwPimNeighborUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this PIM neighbor (last) became a neighbor of the local router." ::= { hwPimNeighborEntry 6 } hwPimNeighborExpiryTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum time remaining before this PIM neighbor will be aged out. The value zero indicates that this PIM neighbor will never be aged out." ::= { hwPimNeighborEntry 7 } hwPimNeighborDrPriorityPresent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if this neighbor is using the DR Priority option." REFERENCE "RFC 4601 section 4.3.2" ::= { hwPimNeighborEntry 8 } hwPimNeighborDrPriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the Designated Router Priority from the last PIM Hello message received from this neighbor. This object is always zero if hwPimNeighborDrPriorityPresent is FALSE." REFERENCE "RFC 4601 section 4.3.2" ::= { hwPimNeighborEntry 9 } hwPimNeighborLanPruneDelayPresent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if this neighbor is using the LAN Prune Delay option." REFERENCE "RFC 4601 section 4.3.3" ::= { hwPimNeighborEntry 10 } hwPimNeighborTBit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the T bit was set in the LAN Prune Delay option received from this neighbor. The T bit specifies the ability of the neighbor to disable join suppression. This object is always TRUE if hwPimNeighborLanPruneDelayPresent is FALSE." REFERENCE "RFC 4601 section 4.3.3" ::= { hwPimNeighborEntry 11 } hwPimNeighborPropagationDelay OBJECT-TYPE SYNTAX Unsigned32 (0..32767) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the Propagation_Delay field of the LAN Prune Delay option received from this neighbor. This object is always zero if hwPimNeighborLanPruneDelayPresent is FALSE." REFERENCE "RFC 4601 section 4.3.3" ::= { hwPimNeighborEntry 12 } hwPimNeighborOverrideInterval OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the Override_Interval field of the LAN Prune Delay option received from this neighbor. This object is always zero if hwPimNeighborLanPruneDelayPresent is FALSE." REFERENCE "RFC 4601 section 4.3.3" ::= { hwPimNeighborEntry 13 } hwPimNeighborBidirCapable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if this neighbor is using the Bidirectional-PIM Capable option." REFERENCE "I-D.ietf-pim-bidir section 3.2 and 3.7.4" ::= { hwPimNeighborEntry 14 } hwPimNeighborSrCapable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if this neighbor is using the State Refresh Capable option. This object is used only by PIM-DM." REFERENCE "RFC 3973 section 4.3.4" ::= { hwPimNeighborEntry 15 } hwPimNeighborIfName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..64)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The name for the interface used to reach this PIM neighbor." ::= { hwPimNeighborEntry 16 } hwPimNbrSecAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPimNbrSecAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the secondary addresses advertised by each PIM neighbor (on a subset of the rows of the hwPimNeighborTable defined above)." REFERENCE "RFC 4601 section 4.3.4" ::= { hwPim 3 } hwPimNbrSecAddressEntry OBJECT-TYPE SYNTAX HwPimNbrSecAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the hwPimNbrSecAddressTable." INDEX { hwPimNbrSecAddressIfIndex, hwPimNbrSecAddressType, hwPimNbrSecAddressPrimary, hwPimNbrSecAddress } ::= { hwPimNbrSecAddressTable 1 } HwPimNbrSecAddressEntry ::= SEQUENCE { hwPimNbrSecAddressIfIndex InterfaceIndex, hwPimNbrSecAddressType InetAddressType, hwPimNbrSecAddressPrimary InetAddress, hwPimNbrSecAddress InetAddress } hwPimNbrSecAddressIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of ifIndex for the interface used to reach this PIM neighbor." ::= { hwPimNbrSecAddressEntry 1 } hwPimNbrSecAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of this PIM neighbor." ::= { hwPimNbrSecAddressEntry 2 } hwPimNbrSecAddressPrimary OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The primary IP address of this PIM neighbor. The InetAddressType is given by the hwPimNbrSecAddressType object." ::= { hwPimNbrSecAddressEntry 3 } hwPimNbrSecAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The secondary IP address of this PIM neighbor. The InetAddressType is given by the hwPimNbrSecAddressType object." ::= { hwPimNbrSecAddressEntry 4 } hwPimStarGTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPimStarGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the non-interface specific (*,G) state that PIM has." REFERENCE "RFC 4601 section 4.1.3" ::= { hwPim 4 } hwPimStarGEntry OBJECT-TYPE SYNTAX HwPimStarGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the hwPimStarGTable." INDEX { hwPimStarGAddressType, hwPimStarGGrpAddress } ::= { hwPimStarGTable 1 } HwPimStarGEntry ::= SEQUENCE { hwPimStarGAddressType InetAddressType, hwPimStarGGrpAddress InetAddress, hwPimStarGUpTime TimeTicks, hwPimStarGPimMode HWPimMode, hwPimStarGRpAddressType InetAddressType, hwPimStarGRpAddress InetAddress, hwPimStarGPimModeOrigin HWPimGroupMappingOriginType, hwPimStarGRpIsLocal TruthValue, hwPimStarGUpstreamJoinState INTEGER, hwPimStarGUpstreamJoinTimer TimeTicks, hwPimStarGUpstreamNeighborType InetAddressType, hwPimStarGUpstreamNeighbor InetAddress, hwPimStarGRpfIfIndex InterfaceIndexOrZero, hwPimStarGRpfNextHopType InetAddressType, hwPimStarGRpfNextHop InetAddress, hwPimStarGRpfRouteProtocol IANAipRouteProtocol, hwPimStarGRpfRouteAddress InetAddress, hwPimStarGRpfRoutePrefixLength InetAddressPrefixLength, hwPimStarGRpfRouteMetricPref Unsigned32, hwPimStarGRpfRouteMetric Unsigned32 } hwPimStarGAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of this multicast group." ::= { hwPimStarGEntry 1 } hwPimStarGGrpAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The multicast group address. The InetAddressType is given by the hwPimStarGAddressType object." ::= { hwPimStarGEntry 2 } hwPimStarGUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this entry was created by the local router." ::= { hwPimStarGEntry 3 } hwPimStarGPimMode OBJECT-TYPE SYNTAX HWPimMode { asm(3), bidir(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether this entry represents an ASM (Any Source Multicast, used with PIM-SM) or BIDIR-PIM group." ::= { hwPimStarGEntry 4 } hwPimStarGRpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of the Rendezvous Point (RP), or unknown(0) if the RP address is unknown." ::= { hwPimStarGEntry 5 } hwPimStarGRpAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the Rendezvous Point (RP) for the group. The InetAddressType is given by the hwPimStarGRpAddressType." ::= { hwPimStarGEntry 6 } hwPimStarGPimModeOrigin OBJECT-TYPE SYNTAX HWPimGroupMappingOriginType MAX-ACCESS read-only STATUS current DESCRIPTION "The mechanism by which the PIM mode and RP for the group were learned." ::= { hwPimStarGEntry 7 } hwPimStarGRpIsLocal OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the local router is the RP for the group." ::= { hwPimStarGEntry 8 } hwPimStarGUpstreamJoinState OBJECT-TYPE SYNTAX INTEGER { notJoined (1), joined (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the local router should join the RP tree for the group. This corresponds to the state of the upstream (*,G) state machine in the PIM-SM specification." REFERENCE "RFC 4601 section 4.5.6" ::= { hwPimStarGEntry 9 } hwPimStarGUpstreamJoinTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before the local router next sends a periodic (*,G) Join message on hwPimStarGRpfIfIndex. This timer is called the (*,G) Upstream Join Timer in the PIM-SM specification. This object is zero if the timer is not running." REFERENCE "RFC 4601 section 4.10" ::= { hwPimStarGEntry 10 } hwPimStarGUpstreamNeighborType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The primary address type of the upstream neighbor, or unknown(0) if the upstream neighbor address is unknown or is not a PIM neighbor." ::= { hwPimStarGEntry 11 } hwPimStarGUpstreamNeighbor OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The primary address of the neighbor on hwPimStarGRpfIfIndex that the local router is sending periodic (*,G) Join messages to. The InetAddressType is given by the hwPimStarGUpstreamNeighborType object. This address is called RPF'(*,G) in the PIM-SM specification." REFERENCE "RFC 4601 section 4.1.6" ::= { hwPimStarGEntry 12 } hwPimStarGRpfIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ifIndex for the RPF interface towards the RP, or zero if the RPF interface is unknown." ::= { hwPimStarGEntry 13 } hwPimStarGRpfNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of the RPF next hop towards the RP, or unknown(0) if the RPF next hop is unknown." ::= { hwPimStarGEntry 14 } hwPimStarGRpfNextHop OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the RPF next hop towards the RP. The InetAddressType is given by the hwPimStarGRpfNextHopType object. This address is called MRIB.next_hop(RP(G)) in the PIM-SM specification." REFERENCE "RFC 4601 section 4.5.5" ::= { hwPimStarGEntry 15 } hwPimStarGRpfRouteProtocol OBJECT-TYPE SYNTAX IANAipRouteProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The routing mechanism via which the route used to find the RPF interface towards the RP was learned." ::= { hwPimStarGEntry 16 } hwPimStarGRpfRouteAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address which when combined with the corresponding value of hwPimStarGRpfRoutePrefixLength identifies the route used to find the RPF interface towards the RP. The InetAddressType is given by the hwPimStarGRpfNextHopType object. This address object is only significant up to hwPimStarGRpfRoutePrefixLength bits. The remainder of the address bits are zero." ::= { hwPimStarGEntry 17 } hwPimStarGRpfRoutePrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "The prefix length which when combined with the corresponding value of hwPimStarGRpfRouteAddress identifies the route used to find the RPF interface towards the RP. The InetAddressType is given by the hwPimStarGRpfNextHopType object." ::= { hwPimStarGEntry 18 } hwPimStarGRpfRouteMetricPref OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The metric preference of the route used to find the RPF interface towards the RP." ::= { hwPimStarGEntry 19 } hwPimStarGRpfRouteMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The routing metric of the route used to find the RPF interface towards the RP." ::= { hwPimStarGEntry 20 } hwPimStarGITable OBJECT-TYPE SYNTAX SEQUENCE OF HwPimStarGIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the interface-specific (*,G) state that PIM has." REFERENCE "RFC 4601 section 4.1.3" ::= { hwPim 5 } hwPimStarGIEntry OBJECT-TYPE SYNTAX HwPimStarGIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the hwPimStarGITable." INDEX { hwPimStarGAddressType, hwPimStarGGrpAddress, hwPimStarGIIfIndex } ::= { hwPimStarGITable 1 } HwPimStarGIEntry ::= SEQUENCE { hwPimStarGIIfIndex InterfaceIndex, hwPimStarGIUpTime TimeTicks, hwPimStarGILocalMembership TruthValue, hwPimStarGIJoinPruneState INTEGER, hwPimStarGIPrunePendingTimer TimeTicks, hwPimStarGIJoinExpiryTimer TimeTicks, hwPimStarGIAssertState INTEGER, hwPimStarGIAssertTimer TimeTicks, hwPimStarGIAssertWinnerAddressType InetAddressType, hwPimStarGIAssertWinnerAddress InetAddress, hwPimStarGIAssertWinnerMetricPref Unsigned32, hwPimStarGIAssertWinnerMetric Unsigned32 } hwPimStarGIIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the interface that this entry corresponds to." ::= { hwPimStarGIEntry 1 } hwPimStarGIUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this entry was created by the local router." ::= { hwPimStarGIEntry 2 } hwPimStarGILocalMembership OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the local router has (*,G) local membership on this interface (resulting from a mechanism such as IGMP or MLD). This corresponds to local_receiver_include(*,G,I) in the PIM-SM specification." REFERENCE "RFC 3376, RFC 3810, RFC 4601 section 4.1.6" ::= { hwPimStarGIEntry 3 } hwPimStarGIJoinPruneState OBJECT-TYPE SYNTAX INTEGER { noInfo (1), join (2), prunePending (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state resulting from (*,G) Join/Prune messages received on this interface. This corresponds to the state of the downstream per-interface (*,G) state machine in the PIM-SM specification." REFERENCE "RFC 4601 section 4.5.2" ::= { hwPimStarGIEntry 4 } hwPimStarGIPrunePendingTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before the local router acts on a (*,G) Prune message received on this interface, during which the router is waiting to see whether another downstream router will override the Prune message. This timer is called the (*,G) Prune-Pending Timer in the PIM-SM specification. This object is zero if the timer is not running." REFERENCE "RFC 4601 section 4.5.1" ::= { hwPimStarGIEntry 5 } hwPimStarGIJoinExpiryTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before (*,G) Join state for this interface expires. This timer is called the (*,G) Join Expiry Timer in the PIM-SM specification. This object is zero if the timer is not running. A value of 'FFFFFFFF'h indicates an infinite expiry time." REFERENCE "RFC 4601 section 4.10" ::= { hwPimStarGIEntry 6 } hwPimStarGIAssertState OBJECT-TYPE SYNTAX INTEGER { noInfo (1), iAmAssertWinner (2), iAmAssertLoser (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The (*,G) Assert state for this interface. This corresponds to the state of the per-interface (*,G) Assert state machine in the PIM-SM specification. If hwPimStarGPimMode is 'bidir', this object must be 'noInfo'." REFERENCE "RFC 4601 section 4.6.2" ::= { hwPimStarGIEntry 7 } hwPimStarGIAssertTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "If hwPimStarGIAssertState is 'iAmAssertWinner', this is the time remaining before the local router next sends a (*,G) Assert message on this interface. If hwPimStarGIAssertState is 'iAmAssertLoser', this is the time remaining before the (*,G) Assert state expires. If hwPimStarGIAssertState is 'noInfo', this is zero. This timer is called the (*,G) Assert Timer in the PIM-SM specification." REFERENCE "RFC 4601 section 4.6.2" ::= { hwPimStarGIEntry 8 } hwPimStarGIAssertWinnerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "If hwPimStarGIAssertState is 'iAmAssertLoser', this is the address type of the assert winner; otherwise, this object is unknown(0)." ::= { hwPimStarGIEntry 9 } hwPimStarGIAssertWinnerAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "If hwPimStarGIAssertState is 'iAmAssertLoser', this is the address of the assert winner. The InetAddressType is given by the hwPimStarGIAssertWinnerAddressType object." ::= { hwPimStarGIEntry 10 } hwPimStarGIAssertWinnerMetricPref OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "If hwPimStarGIAssertState is 'iAmAssertLoser', this is the metric preference of the route to the RP advertised by the assert winner; otherwise, this object is zero." ::= { hwPimStarGIEntry 11 } hwPimStarGIAssertWinnerMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "If hwPimStarGIAssertState is 'iAmAssertLoser', this is the routing metric of the route to the RP advertised by the assert winner; otherwise, this object is zero." ::= { hwPimStarGIEntry 12 } hwPimSGTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPimSGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the non-interface specific (S,G) state that PIM has." REFERENCE "RFC 4601 section 4.1.4" ::= { hwPim 6 } hwPimSGEntry OBJECT-TYPE SYNTAX HwPimSGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the hwPimSGTable." INDEX { hwPimSGAddressType, hwPimSGGrpAddress, hwPimSGSrcAddress } ::= { hwPimSGTable 1 } HwPimSGEntry ::= SEQUENCE { hwPimSGAddressType InetAddressType, hwPimSGGrpAddress InetAddress, hwPimSGSrcAddress InetAddress, hwPimSGUpTime TimeTicks, hwPimSGPimMode HWPimMode, hwPimSGUpstreamJoinState INTEGER, hwPimSGUpstreamJoinTimer TimeTicks, hwPimSGUpstreamNeighbor InetAddress, hwPimSGRpfIfIndex InterfaceIndexOrZero, hwPimSGRpfNextHopType InetAddressType, hwPimSGRpfNextHop InetAddress, hwPimSGRpfRouteProtocol IANAipRouteProtocol, hwPimSGRpfRouteAddress InetAddress, hwPimSGRpfRoutePrefixLength InetAddressPrefixLength, hwPimSGRpfRouteMetricPref Unsigned32, hwPimSGRpfRouteMetric Unsigned32, hwPimSGSptBit TruthValue, hwPimSGKeepaliveTimer TimeTicks, hwPimSGDrRegisterState INTEGER, hwPimSGDrRegisterStopTimer TimeTicks, hwPimSGRpRegisterPmbrAddressType InetAddressType, hwPimSGRpRegisterPmbrAddress InetAddress, hwPimSGUpstreamPruneState INTEGER, hwPimSGUpstreamPruneLimitTimer TimeTicks, hwPimSGOriginatorState INTEGER, hwPimSGSourceActiveTimer TimeTicks, hwPimSGStateRefreshTimer TimeTicks } hwPimSGAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of the source and multicast group for this entry." ::= { hwPimSGEntry 1 } hwPimSGGrpAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The multicast group address for this entry. The InetAddressType is given by the hwPimSGAddressType object." ::= { hwPimSGEntry 2 } hwPimSGSrcAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The source address for this entry. The InetAddressType is given by the hwPimSGAddressType object." ::= { hwPimSGEntry 3 } hwPimSGUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this entry was created by the local router." ::= { hwPimSGEntry 4 } hwPimSGPimMode OBJECT-TYPE SYNTAX HWPimMode { ssm(2), asm(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether hwPimSGGrpAddress is an SSM (Source Specific Multicast, used with PIM-SM) or ASM (Any Source Multicast, used with PIM-SM) group." REFERENCE "RFC 4601 section 4.5.2, RFC 3569 and I-D.ietf-mboned-ip-mcast-mib ipMcastSsmRangeTable" ::= { hwPimSGEntry 5 } hwPimSGUpstreamJoinState OBJECT-TYPE SYNTAX INTEGER { notJoined (1), joined (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the local router should join the shortest-path tree for the source and group represented by this entry. This corresponds to the state of the upstream (S,G) state machine in the PIM-SM specification." REFERENCE "RFC 4601 section 4.5.7" ::= { hwPimSGEntry 6 } hwPimSGUpstreamJoinTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before the local router next sends a periodic (S,G) Join message on hwPimSGRpfIfIndex. This timer is called the (S,G) Upstream Join Timer in the PIM-SM specification. This object is zero if the timer is not running." REFERENCE "RFC 4601 section 4.10 and 4.11" ::= { hwPimSGEntry 7 } hwPimSGUpstreamNeighbor OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The primary address of the neighbor on hwPimSGRpfIfIndex that the local router is sending periodic (S,G) Join messages to. This is zero if the RPF next hop is unknown or is not a PIM neighbor. The InetAddressType is given by the hwPimSGAddressType object. This address is called RPF'(S,G) in the PIM-SM specification." REFERENCE "RFC 4601 section 4.1.6" ::= { hwPimSGEntry 8 } hwPimSGRpfIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ifIndex for the RPF interface towards the source, or zero if the RPF interface is unknown." ::= { hwPimSGEntry 9 } hwPimSGRpfNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of the RPF next hop towards the source, or unknown(0) if the RPF next hop is unknown." ::= { hwPimSGEntry 10 } hwPimSGRpfNextHop OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the RPF next hop towards the source. The InetAddressType is given by the hwPimSGRpfNextHopType. This address is called MRIB.next_hop(S) in the PIM-SM specification." REFERENCE "RFC 4601 section 4.5.5" ::= { hwPimSGEntry 11 } hwPimSGRpfRouteProtocol OBJECT-TYPE SYNTAX IANAipRouteProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The routing mechanism via which the route used to find the RPF interface towards the source was learned." ::= { hwPimSGEntry 12 } hwPimSGRpfRouteAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address which when combined with the corresponding value of hwPimSGRpfRoutePrefixLength identifies the route used to find the RPF interface towards the source. The InetAddressType is given by the hwPimSGRpfNextHopType object. This address object is only significant up to hwPimSGRpfRoutePrefixLength bits. The remainder of the address bits are zero." ::= { hwPimSGEntry 13 } hwPimSGRpfRoutePrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "The prefix length which when combined with the corresponding value of hwPimSGRpfRouteAddress identifies the route used to find the RPF interface towards the source. The InetAddressType is given by the hwPimSGRpfNextHopType object." ::= { hwPimSGEntry 14 } hwPimSGRpfRouteMetricPref OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The metric preference of the route used to find the RPF interface towards the source." ::= { hwPimSGEntry 15 } hwPimSGRpfRouteMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The routing metric of the route used to find the RPF interface towards the source." ::= { hwPimSGEntry 16 } hwPimSGSptBit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the SPT bit is set; and therefore whether forwarding is taking place on the shortest-path tree." ::= { hwPimSGEntry 17 } hwPimSGKeepaliveTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before, in the absence of explicit (S,G) local membership or (S,G) Join messages received to maintain it, this (S,G) state expires. This timer is called the (S,G) Keepalive Timer in the PIM-SM specification." REFERENCE "RFC 4601 section 4.1.4" ::= { hwPimSGEntry 18 } hwPimSGDrRegisterState OBJECT-TYPE SYNTAX INTEGER { noInfo (1), join (2), joinPending (3), prune (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the local router should encapsulate (S,G) data packets in Register messages and send them to the RP. This corresponds to the state of the per-(S,G) Register state machine in the PIM-SM specification. This object is always 'noInfo' unless hwPimSGPimMode is 'asm'." REFERENCE "RFC 4601 section 4.4.1" ::= { hwPimSGEntry 19 } hwPimSGDrRegisterStopTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "If hwPimSGDrRegisterState is 'prune', this is the time remaining before the local router sends a Null-Register message to the RP. If hwPimSGDrRegisterState is 'joinPending', this is the time remaining before the local router resumes encapsulating data packets and sending them to the RP. Otherwise, this is zero. This timer is called the Register-Stop Timer in the PIM-SM specification." REFERENCE "RFC 4601 section 4.4" ::= { hwPimSGEntry 20 } hwPimSGRpRegisterPmbrAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of the first PIM Multicast Border Router to send a Register message with the Border bit set. This object is unknown(0) if the local router is not the RP for the group." ::= { hwPimSGEntry 21 } hwPimSGRpRegisterPmbrAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the first PIM Multicast Border Router to send a Register message with the Border bit set. The InetAddressType is given by the hwPimSGRpRegisterPmbrAddressType object." ::= { hwPimSGEntry 22 } hwPimSGUpstreamPruneState OBJECT-TYPE SYNTAX INTEGER { forwarding (1), ackpending (2), pruned (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the local router has pruned itself from the tree. This corresponds to the state of the upstream prune (S,G) state machine in the PIM-DM specification. This object is used only by PIM-DM." REFERENCE "RFC 3973 section 4.4.1" ::= { hwPimSGEntry 23 } hwPimSGUpstreamPruneLimitTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before the local router may send a (S,G) Prune message on hwPimSGRpfIfIndex. This timer is called the (S,G) Prune Limit Timer in the PIM-DM specification. This object is zero if the timer is not running. This object is used only by PIM-DM." REFERENCE "RFC 2973 section 4.8" ::= { hwPimSGEntry 24 } hwPimSGOriginatorState OBJECT-TYPE SYNTAX INTEGER { notOriginator (1), originator (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the router is an originator for an (S,G) message flow. This corresponds to the state of the per-(S,G) Originator state machine in the PIM-DM specification. This object is used only by PIM-DM." REFERENCE "RFC 3973 section 4.5.2" ::= { hwPimSGEntry 25 } hwPimSGSourceActiveTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "If hwPimSGOriginatorState is 'originator', this is the time remaining before the local router reverts to a notOriginator state. Otherwise, this is zero. This timer is called the Source Active Timer in the PIM-DM specification. This object is used only by PIM-DM." REFERENCE "RFC 3973 section 4.8" ::= { hwPimSGEntry 26 } hwPimSGStateRefreshTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "If hwPimSGOriginatorState is 'originator', this is the time remaining before the local router sends a State Refresh message. Otherwise, this is zero. This timer is called the State Refresh Timer in the PIM-DM specification. This object is used only by PIM-DM." REFERENCE "RFC 3973 section 4.8" ::= { hwPimSGEntry 27 } hwPimSGITable OBJECT-TYPE SYNTAX SEQUENCE OF HwPimSGIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the interface-specific (S,G) state that PIM has." REFERENCE "RFC 4601 section 4.1.4" ::= { hwPim 7 } hwPimSGIEntry OBJECT-TYPE SYNTAX HwPimSGIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the hwPimSGITable." INDEX { hwPimSGAddressType, hwPimSGGrpAddress, hwPimSGSrcAddress, hwPimSGIIfIndex } ::= { hwPimSGITable 1 } HwPimSGIEntry ::= SEQUENCE { hwPimSGIIfIndex InterfaceIndex, hwPimSGIUpTime TimeTicks, hwPimSGILocalMembership TruthValue, hwPimSGIJoinPruneState INTEGER, hwPimSGIPrunePendingTimer TimeTicks, hwPimSGIJoinExpiryTimer TimeTicks, hwPimSGIAssertState INTEGER, hwPimSGIAssertTimer TimeTicks, hwPimSGIAssertWinnerAddressType InetAddressType, hwPimSGIAssertWinnerAddress InetAddress, hwPimSGIAssertWinnerMetricPref Unsigned32, hwPimSGIAssertWinnerMetric Unsigned32 } hwPimSGIIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the interface that this entry corresponds to." ::= { hwPimSGIEntry 1 } hwPimSGIUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this entry was created by the local router." ::= { hwPimSGIEntry 2 } hwPimSGILocalMembership OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the local router has (S,G) local membership on this interface (resulting from a mechanism such as IGMP or MLD). This corresponds to local_receiver_include(S,G,I) in the PIM-SM specification." REFERENCE "RFC 3376, RFC 3810, RFC 4601 sections 4.1.6, 4.6.1 and 4.6.2" ::= { hwPimSGIEntry 3 } hwPimSGIJoinPruneState OBJECT-TYPE SYNTAX INTEGER { noInfo (1), join (2), prunePending (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state resulting from (S,G) Join/Prune messages received on this interface. This corresponds to the state of the downstream per-interface (S,G) state machine in the PIM-SM and PIM-DM specification." REFERENCE "RFC 4601 section 4.5.3 and RFC 3973 section 4.4.2" ::= { hwPimSGIEntry 4 } hwPimSGIPrunePendingTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before the local router acts on an (S,G) Prune message received on this interface, during which the router is waiting to see whether another downstream router will override the Prune message. This timer is called the (S,G) Prune-Pending Timer in the PIM-SM specification. This object is zero if the timer is not running." REFERENCE "RFC 4601 section 4.5.3 and 4.5.4" ::= { hwPimSGIEntry 5 } hwPimSGIJoinExpiryTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before (S,G) Join state for this interface expires. This timer is called the (S,G) Join Expiry Timer in the PIM-SM specification. This object is zero if the timer is not running. A value of 'FFFFFFFF'h indicates an infinite expiry time. This timer is called the (S,G) Prune Timer in the PIM-DM specification." REFERENCE "RFC 4601 section 4.10 and RFC 3973 section 4.8" ::= { hwPimSGIEntry 6 } hwPimSGIAssertState OBJECT-TYPE SYNTAX INTEGER { noInfo (1), iAmAssertWinner (2), iAmAssertLoser (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The (S,G) Assert state for this interface. This corresponds to the state of the per-interface (S,G) Assert state machine in the PIM-SM specification." REFERENCE "RFC 4601 section 4.6.1" ::= { hwPimSGIEntry 7 } hwPimSGIAssertTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "If hwPimSGIAssertState is 'iAmAssertWinner', this is the time remaining before the local router next sends a (S,G) Assert message on this interface. If hwPimSGIAssertState is 'iAmAssertLoser', this is the time remaining before the (S,G) Assert state expires. If hwPimSGIAssertState is 'noInfo', this is zero. This timer is called the (S,G) Assert Timer in the PIM-SM specification." REFERENCE "RFC 4601 section 4.6.1" ::= { hwPimSGIEntry 8 } hwPimSGIAssertWinnerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "If hwPimSGIAssertState is 'iAmAssertLoser', this is the address type of the assert winner; otherwise, this object is unknown(0)." ::= { hwPimSGIEntry 9 } hwPimSGIAssertWinnerAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "If hwPimSGIAssertState is 'iAmAssertLoser', this is the address of the assert winner. The InetAddressType is given by the hwPimSGIAssertWinnerAddressType object." ::= { hwPimSGIEntry 10 } hwPimSGIAssertWinnerMetricPref OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "If hwPimSGIAssertState is 'iAmAssertLoser', this is the metric preference of the route to the source advertised by the assert winner; otherwise, this object is zero." ::= { hwPimSGIEntry 11 } hwPimSGIAssertWinnerMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "If hwPimSGIAssertState is 'iAmAssertLoser', this is the routing metric of the route to the source advertised by the assert winner; otherwise, this object is zero." ::= { hwPimSGIEntry 12 } hwPimSGRptTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPimSGRptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the non-interface specific (S,G,rpt) state that PIM has." REFERENCE "RFC 4601 section 4.1.5" ::= { hwPim 8 } hwPimSGRptEntry OBJECT-TYPE SYNTAX HwPimSGRptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the hwPimSGRptTable." INDEX { hwPimStarGAddressType, hwPimStarGGrpAddress, hwPimSGRptSrcAddress } ::= { hwPimSGRptTable 1 } HwPimSGRptEntry ::= SEQUENCE { hwPimSGRptSrcAddress InetAddress, hwPimSGRptUpTime TimeTicks, hwPimSGRptUpstreamPruneState INTEGER, hwPimSGRptUpstreamOverrideTimer TimeTicks } hwPimSGRptSrcAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The source address for this entry. The InetAddressType is given by the hwPimStarGAddressType object." ::= { hwPimSGRptEntry 1 } hwPimSGRptUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this entry was created by the local router." ::= { hwPimSGRptEntry 2 } hwPimSGRptUpstreamPruneState OBJECT-TYPE SYNTAX INTEGER { rptNotJoined (1), pruned (2), notPruned (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the local router should prune the source off the RP tree. This corresponds to the state of the upstream (S,G,rpt) state machine for triggered messages in the PIM-SM specification." REFERENCE "RFC 4601 section 4.5.9" ::= { hwPimSGRptEntry 3 } hwPimSGRptUpstreamOverrideTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before the local router sends a triggered (S,G,rpt) Join message on hwPimStarGRpfIfIndex. This timer is called the (S,G,rpt) Upstream Override Timer in the PIM-SM specification. This object is zero if the timer is not running." REFERENCE "RFC 4601 section 4.5.9" ::= { hwPimSGRptEntry 4 } hwPimSGRptITable OBJECT-TYPE SYNTAX SEQUENCE OF HwPimSGRptIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the interface-specific (S,G,rpt) state that PIM has." REFERENCE "RFC 4601 section 4.1.5" ::= { hwPim 9 } hwPimSGRptIEntry OBJECT-TYPE SYNTAX HwPimSGRptIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the hwPimSGRptITable." INDEX { hwPimStarGAddressType, hwPimStarGGrpAddress, hwPimSGRptSrcAddress, hwPimSGRptIIfIndex } ::= { hwPimSGRptITable 1 } HwPimSGRptIEntry ::= SEQUENCE { hwPimSGRptIIfIndex InterfaceIndex, hwPimSGRptIUpTime TimeTicks, hwPimSGRptILocalMembership TruthValue, hwPimSGRptIJoinPruneState INTEGER, hwPimSGRptIPrunePendingTimer TimeTicks, hwPimSGRptIPruneExpiryTimer TimeTicks } hwPimSGRptIIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the interface that this entry corresponds to." ::= { hwPimSGRptIEntry 1 } hwPimSGRptIUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this entry was created by the local router." ::= { hwPimSGRptIEntry 2 } hwPimSGRptILocalMembership OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the local router has both (*,G) include local membership and (S,G) exclude local membership on this interface (resulting from a mechanism such as IGMP or MLD). This corresponds to local_receiver_exclude(S,G,I) in the PIM-SM specification." REFERENCE "RFC 3376, RFC 3810, RFC 4601 section 4.1.6" ::= { hwPimSGRptIEntry 3 } hwPimSGRptIJoinPruneState OBJECT-TYPE SYNTAX INTEGER { noInfo (1), prune (2), prunePending (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state resulting from (S,G,rpt) Join/Prune messages received on this interface. This corresponds to the state of the downstream per-interface (S,G,rpt) state machine in the PIM-SM specification." REFERENCE "RFC 4601 section 4.5.4" ::= { hwPimSGRptIEntry 4 } hwPimSGRptIPrunePendingTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before the local router starts pruning this source off the RP tree. This timer is called the (S,G,rpt) Prune-Pending Timer in the PIM-SM specification. This object is zero if the timer is not running." REFERENCE "RFC 4601 section 4.5.4" ::= { hwPimSGRptIEntry 5 } hwPimSGRptIPruneExpiryTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before (S,G,rpt) Prune state for this interface expires. This timer is called the (S,G,rpt) Prune Expiry Timer in the PIM-SM specification. This object is zero if the timer is not running. A value of 'FFFFFFFF'h indicates an infinite expiry time." REFERENCE "RFC 4601 section 4.5.4" ::= { hwPimSGRptIEntry 6 } hwPimGroupMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPimGroupMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing mappings from multicast group prefixes to the PIM mode and RP address to use for groups within that group prefix. Rows in this table are created for a variety of reasons, indicated by the value of the hwPimGroupMappingOrigin object. - Rows with a hwPimGroupMappingOrigin value of 'fixed' are created automatically by the router at startup, to correspond to the well-defined prefixes of link-local and unroutable group addresses. These rows are never destroyed. - Rows with a hwPimGroupMappingOrigin value of 'embedded' are created by the router to correspond to group prefixes that are to be treated as being in Embedded-RP format. - Rows with a hwPimGroupMappingOrigin value of 'configRp' are created and destroyed as a result of rows in the pimStaticRPTable being created and destroyed. - Rows with a hwPimGroupMappingOrigin value of 'configSsm' are created and destroyed as a result of configuration of SSM address ranges to the local router. - Rows with a hwPimGroupMappingOrigin value of 'bsr' are created as a result of running the PIM Bootstrap Router (BSR) mechanism. If the local router is not the elected BSR, these rows are created to correspond to group prefixes in the PIM Bootstrap messages received from the elected BSR. If the local router is the elected BSR, these rows are created to correspond to group prefixes in the PIM Bootstrap messages that the local router sends. In either case, these rows are destroyed when the group prefixes are timed out by the BSR mechanism. - Rows with a hwPimGroupMappingOrigin value of 'other' are created and destroyed according to some other mechanism not specified here. Given the collection of rows in this table at any point in time, the PIM mode and RP address to use for a particular group is determined using the following algorithm. 1. From the set of all rows, the subset whose group prefix contains the group in question are selected. 2. If there are no such rows, the behavior is undefined. 3. From the selected subset of rows, the subset that have the greatest value of hwPimGroupMappingGrpPrefixLength are selected. 4. If there are multiple selected rows, and a subset are defined by pimStaticRPTable (hwPimGroupMappingOrigin value of 'configRp') with pimStaticRPOverrideDynamic set to TRUE, then this subset is selected. 5. If there are still multiple selected rows, the subset that have the highest precedence (the lowest numerical value for hwPimGroupMappingPrecedence) are selected. 6. If there are still multiple selected rows, the row selected is implementation dependent; the implementation might or might not apply the PIM hash function to select the row. 7. The group mode to use is given by the value of hwPimGroupMappingPimMode from the single selected row; the RP to use is given by the value of hwPimGroupMappingRpAddress, unless hwPimGroupMappingOrigin is 'embedded', in which case the RP is extracted from the group address in question." REFERENCE "RFC 4601 section 3.7, RFC 3956 and RFC 4610" ::= { hwPim 13 } hwPimGroupMappingEntry OBJECT-TYPE SYNTAX HwPimGroupMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the hwPimGroupMappingTable." INDEX { hwPimGroupMappingOrigin, hwPimGroupMappingAddressType, hwPimGroupMappingGrpAddress, hwPimGroupMappingGrpPrefixLength, hwPimGroupMappingRpAddressType, hwPimGroupMappingRpAddress } ::= { hwPimGroupMappingTable 1 } HwPimGroupMappingEntry ::= SEQUENCE { hwPimGroupMappingOrigin HWPimGroupMappingOriginType, hwPimGroupMappingAddressType InetAddressType, hwPimGroupMappingGrpAddress InetAddress, hwPimGroupMappingGrpPrefixLength InetAddressPrefixLength, hwPimGroupMappingRpAddressType InetAddressType, hwPimGroupMappingRpAddress InetAddress, hwPimGroupMappingPimMode HWPimMode, hwPimGroupMappingPrecedence Unsigned32 } hwPimGroupMappingOrigin OBJECT-TYPE SYNTAX HWPimGroupMappingOriginType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The mechanism by which this group mapping was learned." ::= { hwPimGroupMappingEntry 1 } hwPimGroupMappingAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of the IP multicast group prefix." ::= { hwPimGroupMappingEntry 2 } hwPimGroupMappingGrpAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast group address which, when combined with hwPimGroupMappingGrpPrefixLength, gives the group prefix for this mapping. The InetAddressType is given by the hwPimGroupMappingAddressType object. This address object is only significant up to hwPimGroupMappingGrpPrefixLength bits. The remainder of the address bits are zero. This is especially important for this index field, which is part of the index of this entry. Any non-zero bits would signify an entirely different entry." ::= { hwPimGroupMappingEntry 3 } hwPimGroupMappingGrpPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength (4..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The multicast group prefix length, which, when combined with hwPimGroupMappingGrpAddress, gives the group prefix for this mapping. The InetAddressType is given by the hwPimGroupMappingAddressType object. If hwPimGroupMappingAddressType is 'ipv4' or 'ipv4z', this object must be in the range 4..32. If hwPimGroupMappingAddressType is 'ipv6' or 'ipv6z', this object must be in the range 8..128." ::= { hwPimGroupMappingEntry 4 } hwPimGroupMappingRpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of the RP to be used for groups within this group prefix, or unknown(0) if no RP is to be used or if the RP address is unknown. This object must be unknown(0) if hwPimGroupMappingPimMode is ssm(2), or if hwPimGroupMappingOrigin is embedded(6)." ::= { hwPimGroupMappingEntry 5 } hwPimGroupMappingRpAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address of the RP to be used for groups within this group prefix. The InetAddressType is given by the hwPimGroupMappingRpAddressType object." ::= { hwPimGroupMappingEntry 6 } hwPimGroupMappingPimMode OBJECT-TYPE SYNTAX HWPimMode MAX-ACCESS read-only STATUS current DESCRIPTION "The PIM mode to be used for groups in this group prefix." ::= { hwPimGroupMappingEntry 7 } hwPimGroupMappingPrecedence OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The precedence of this row, used in the algorithm that determines which row applies to a given group address (described above). Numerically higher values for this object indicate lower precedences, with the value zero denoting the highest precedence. The absolute values of this object have a significance only on the local router and do not need to be coordinated with other routers." ::= { hwPimGroupMappingEntry 8 } hwPimInterfaceCtlMsgCountTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPimInterfaceCtlMsgCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the control message counter of all PIM interfaces." ::= { hwPim 58} hwPimInterfaceCtlMsgCountEntry OBJECT-TYPE SYNTAX HwPimInterfaceCtlMsgCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the hwPimCtlMsgCountTable. This entry is preserved on agent restart." INDEX { hwPimInterfaceCtlMsgCountIfIndex, hwPimInterfaceCtlMsgCountIpVersion, hwPimInterfaceCtlMsgCountMsgState } ::= { hwPimInterfaceCtlMsgCountTable 1 } HwPimInterfaceCtlMsgCountEntry ::= SEQUENCE { hwPimInterfaceCtlMsgCountIfIndex InterfaceIndex, hwPimInterfaceCtlMsgCountIpVersion InetVersion, hwPimInterfaceCtlMsgCountMsgState HWPimCtlMsgState, hwPimInterfaceCtlMsgCountAssert Unsigned32, hwPimInterfaceCtlMsgCountHello Unsigned32, hwPimInterfaceCtlMsgCountJoinPrune Unsigned32, hwPimInterfaceCtlMsgCountBsr Unsigned32 } hwPimInterfaceCtlMsgCountIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of this PIM interface." ::= { hwPimInterfaceCtlMsgCountEntry 1 } hwPimInterfaceCtlMsgCountIpVersion OBJECT-TYPE SYNTAX InetVersion MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP version of this PIM interface. A physical interface may be configured in multiple modes concurrently, e.g. IPv4 and IPv6, however the traffic is considered to be logically separate." ::= { hwPimInterfaceCtlMsgCountEntry 2 } hwPimInterfaceCtlMsgCountMsgState OBJECT-TYPE SYNTAX HWPimCtlMsgState MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PIM control message state." ::= { hwPimInterfaceCtlMsgCountEntry 3 } hwPimInterfaceCtlMsgCountAssert OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM Assert messages on this interface." ::= { hwPimInterfaceCtlMsgCountEntry 4 } hwPimInterfaceCtlMsgCountHello OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM Hello messages on this interface." ::= { hwPimInterfaceCtlMsgCountEntry 5 } hwPimInterfaceCtlMsgCountJoinPrune OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM Join/Prune messages on this interface." ::= { hwPimInterfaceCtlMsgCountEntry 6 } hwPimInterfaceCtlMsgCountBsr OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM BSR messages on this interface." ::= { hwPimInterfaceCtlMsgCountEntry 7 } hwPimGlobalCtlMsgCountTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPimGlobalCtlMsgCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the control message counter on the router." ::= { hwPim 59 } hwPimGlobalCtlMsgCountEntry OBJECT-TYPE SYNTAX HwPimGlobalCtlMsgCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the hwPimGlobalCtlMsgCountTable. This entry is preserved on agent restart." INDEX { hwPimGlobalCtlMsgCountIpVersion, hwPimGlobalCtlMsgCountMsgState } ::= { hwPimGlobalCtlMsgCountTable 1 } HwPimGlobalCtlMsgCountEntry ::= SEQUENCE { hwPimGlobalCtlMsgCountIpVersion InetVersion, hwPimGlobalCtlMsgCountMsgState HWPimCtlMsgState, hwPimGlobalCtlMsgCountRegister Unsigned32, hwPimGlobalCtlMsgCountRegisterStop Unsigned32, hwPimGlobalCtlMsgCountProbe Unsigned32, hwPimGlobalCtlMsgCountCrp Unsigned32 } hwPimGlobalCtlMsgCountIpVersion OBJECT-TYPE SYNTAX InetVersion MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP version of this PIM instance, e.g. IPv4 and IPv6." ::= { hwPimGlobalCtlMsgCountEntry 1 } hwPimGlobalCtlMsgCountMsgState OBJECT-TYPE SYNTAX HWPimCtlMsgState MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PIM control message state." ::= { hwPimGlobalCtlMsgCountEntry 2 } hwPimGlobalCtlMsgCountRegister OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM Register messages on the router." ::= { hwPimGlobalCtlMsgCountEntry 3 } hwPimGlobalCtlMsgCountRegisterStop OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM Register-stop messages on the router." ::= { hwPimGlobalCtlMsgCountEntry 4 } hwPimGlobalCtlMsgCountProbe OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM Probe messages on the router." ::= { hwPimGlobalCtlMsgCountEntry 5 } hwPimGlobalCtlMsgCountCrp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PIM CRP messages on the router." ::= { hwPimGlobalCtlMsgCountEntry 6 } hwPimNeighborLoss NOTIFICATION-TYPE OBJECTS { hwPimNeighborUpTime, hwPimNeighborIfName, hwPimInstanceID, hwPimInstanceName, hwPimNeighborNotificationReason } STATUS current DESCRIPTION "A hwPimNeighborLoss notification signifies the loss of an adjacency with a neighbor. This notification should be generated when the neighbor timer expires. This notification is generated whenever the counter hwPimNeighborLossCount is incremented, subject to the rate limit specified by hwPimNeighborLossNotificationPeriod." REFERENCE "RFC 4601 section 4.3.2" ::= { hwPimNotifications 1 } hwPimInvalidRegister NOTIFICATION-TYPE OBJECTS { hwPimGroupMappingPimMode, hwPimInvalidRegisterAddressType, hwPimInvalidRegisterOrigin, hwPimInvalidRegisterGroup, hwPimInvalidRegisterRp, hwPimInstanceID, hwPimInstanceName } STATUS current DESCRIPTION "A hwPimInvalidRegister notification signifies that an invalid PIM Register message was received by this device. This notification is generated whenever the counter hwPimInvalidRegisterMsgsRcvd is incremented, subject to the rate limit specified by hwPimInvalidRegisterNotificationPeriod." REFERENCE "RFC 4601 section 4.4.2" ::= { hwPimNotifications 2 } hwPimInvalidJoinPrune NOTIFICATION-TYPE OBJECTS { hwPimGroupMappingPimMode, hwPimInvalidJoinPruneAddressType, hwPimInvalidJoinPruneOrigin, hwPimInvalidJoinPruneGroup, hwPimInvalidJoinPruneRp, hwPimNeighborUpTime, hwPimNeighborIfName, hwPimInstanceID, hwPimInstanceName } STATUS current DESCRIPTION "A hwPimInvalidJoinPrune notification signifies that an invalid PIM Join/Prune message was received by this device. This notification is generated whenever the counter hwPimInvalidJoinPruneMsgsRcvd is incremented, subject to the rate limit specified by hwPimInvalidJoinPruneNotificationPeriod." REFERENCE "RFC 4601 section 4.5.2" ::= { hwPimNotifications 3 } hwPimRpMappingChange NOTIFICATION-TYPE OBJECTS { hwPimGroupMappingPimMode, hwPimGroupMappingPrecedence, hwPimInstanceID, hwPimInstanceName } STATUS current DESCRIPTION "A hwPimRpMappingChange notification signifies a change to the active RP mapping on this device. This notification is generated whenever the counter hwPimRpMappingChangeCount is incremented, subject to the rate limit specified by pimRPMappingChangeNotificationPeriod." ::= { hwPimNotifications 4 } hwPimInterfaceElection NOTIFICATION-TYPE OBJECTS { hwPimInterfaceAddressType, hwPimInterfaceAddress, hwPimInterfaceName, hwPimInstanceID, hwPimInstanceName } STATUS current DESCRIPTION "A hwPimInterfaceElection notification signifies that a new DR or DF has been elected on a network. This notification is generated whenever the counter hwPimInterfaceElectionWinCount is incremented, subject to the rate limit specified by hwPimInterfaceElectionNotificationPeriod." REFERENCE "RFC 4601 section 4.3.2 and I-D.ietf-pim-bidir section 3.5.2" ::= { hwPimNotifications 5 } hwPimNeighborAdd NOTIFICATION-TYPE OBJECTS { hwPimNeighborExpiryTime, hwPimInstanceID, hwPimInstanceName } STATUS current DESCRIPTION "A hwPimNeighborAdd notification signifies the new neighbor. This notification should be generated when receiving the hello report of a new neighbor. This notification is generated whenever the counter hwPimNeighborAddCount is incremented, subject to the rate limit specified by hwPimNeighborAddNotificationPeriod." REFERENCE "RFC 4601 section 4.3.1" ::= { hwPimNotifications 6 } hwPimGRStart NOTIFICATION-TYPE OBJECTS { hwPimGRStartTime, hwPimGRInterval, hwPimInstanceID } STATUS obsolete DESCRIPTION "A hwPimGRStart notification signifies that the router enters the PIM GR state." ::= { hwPimNotifications 7 } hwPimGREnd NOTIFICATION-TYPE OBJECTS { hwPimGREndTime, hwPimInstanceID } STATUS obsolete DESCRIPTION "A hwPimGREnd notification signifies that the router leaves the PIM GR state." ::= { hwPimNotifications 8 } hwPimMrtLimit NOTIFICATION-TYPE OBJECTS { hwPimMrtLimitAddressType, hwPimMrtLimitSource, hwPimMrtLimitGroup, hwPimInstanceID, hwPimInstanceName } STATUS current DESCRIPTION "A hwPimMrtLimit notification signifies that PIM entries cannot be created because the upper limit is crossed." ::= { hwPimNotifications 9 } hwPimNeighborUnavailable NOTIFICATION-TYPE OBJECTS { hwPimNeighborIfName, hwPimInstanceID, hwPimInstanceName, hwPimNeighborNotificationReason } STATUS current DESCRIPTION "A hwPimNeighborUnavailable notification signifies that the PIM neighbor is unavailable." ::= { hwPimNotifications 10 } hwPimNeighborUnavailableClear NOTIFICATION-TYPE OBJECTS { hwPimNeighborIfName, hwPimInstanceID, hwPimInstanceName, hwPimNeighborNotificationReason } STATUS current DESCRIPTION "A hwPimNeighborUnavailableClear notification signifies that the PIM neighbor is available." ::= { hwPimNotifications 11 } hwPimMrtLimitClear NOTIFICATION-TYPE OBJECTS { hwPimMrtLimitAddressType, hwPimMrtLimitSource, hwPimMrtLimitGroup, hwPimInstanceID, hwPimInstanceName } STATUS current DESCRIPTION "A hwPimMrtLimit notification signifies that PIM entries can created." ::= { hwPimNotifications 12 } hwPimMibConformance OBJECT IDENTIFIER ::= { hwPimStdMib 2 } hwPimMibCompliances OBJECT IDENTIFIER ::= { hwPimMibConformance 1 } hwPimMibGroups OBJECT IDENTIFIER ::= { hwPimMibConformance 2 } hwPimMibComplianceAsm MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for PIM-SM MIB." MODULE -- this module MANDATORY-GROUPS { hwPimTopologyGroup, hwPimSsmGroup, hwPimRpConfigGroup, hwPimSmGroup } GROUP hwPimNotificationGroup DESCRIPTION "This group is optional." GROUP hwPimTuningParametersGroup DESCRIPTION "This group is optional." GROUP hwPimRouterStatisticsGroup DESCRIPTION "This group is optional." GROUP hwPimNetMgmtNotificationObjects DESCRIPTION "This group is optional." GROUP hwPimNetMgmtNotificationGroup DESCRIPTION "This group is optional." GROUP hwPimDiagnosticsGroup DESCRIPTION "This group is optional." GROUP hwPimDeviceStorageGroup DESCRIPTION "This group is optional." ::= { hwPimMibCompliances 1 } hwPimMibComplianceBidir MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for Bidir-PIM MIB." MODULE -- this module MANDATORY-GROUPS { hwPimTopologyGroup, hwPimRpConfigGroup, hwPimSmGroup, hwPimBidirGroup } GROUP hwPimNotificationGroup DESCRIPTION "This group is optional." GROUP hwPimTuningParametersGroup DESCRIPTION "This group is optional." GROUP hwPimRouterStatisticsGroup DESCRIPTION "This group is optional." GROUP hwPimNetMgmtNotificationObjects DESCRIPTION "This group is optional." GROUP hwPimNetMgmtNotificationGroup DESCRIPTION "This group is optional." GROUP hwPimDiagnosticsGroup DESCRIPTION "This group is optional." GROUP hwPimDeviceStorageGroup DESCRIPTION "This group is optional." ::= { hwPimMibCompliances 2 } hwPimMibComplianceSsm MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for PIM SSM MIB." MODULE -- this module MANDATORY-GROUPS { hwPimTopologyGroup, hwPimSsmGroup } GROUP hwPimNotificationGroup DESCRIPTION "This group is optional." GROUP hwPimTuningParametersGroup DESCRIPTION "This group is optional." GROUP hwPimRouterStatisticsGroup DESCRIPTION "This group is optional." GROUP hwPimNetMgmtNotificationObjects DESCRIPTION "This group is optional." GROUP hwPimNetMgmtNotificationGroup DESCRIPTION "This group is optional." GROUP hwPimDiagnosticsGroup DESCRIPTION "This group is optional." GROUP hwPimDeviceStorageGroup DESCRIPTION "This group is optional." ::= { hwPimMibCompliances 3 } hwPimMibComplianceDm MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for PIM-DM MIB." MODULE -- this module MANDATORY-GROUPS { hwPimTopologyGroup, hwPimSsmGroup, hwPimRpConfigGroup, hwPimSmGroup, hwPimDmGroup } GROUP hwPimNotificationGroup DESCRIPTION "This group is optional." GROUP hwPimTuningParametersGroup DESCRIPTION "This group is optional." GROUP hwPimRouterStatisticsGroup DESCRIPTION "This group is optional." GROUP hwPimNetMgmtNotificationObjects DESCRIPTION "This group is optional." GROUP hwPimNetMgmtNotificationGroup DESCRIPTION "This group is optional." GROUP hwPimDiagnosticsGroup DESCRIPTION "This group is optional." GROUP hwPimDeviceStorageGroup DESCRIPTION "This group is optional." ::= { hwPimMibCompliances 4 } hwPimTopologyGroup OBJECT-GROUP OBJECTS { hwPimInterfaceAddressType, hwPimInterfaceAddress, hwPimInterfaceGenerationIdValue, hwPimInterfaceDr, hwPimInterfaceDrPriorityEnabled, hwPimInterfaceHelloHoldtime, hwPimInterfaceJoinPruneHoldtime, hwPimInterfaceLanDelayEnabled, hwPimInterfaceEffectPropagDelay, hwPimInterfaceEffectOverrideIvl, hwPimInterfaceSuppressionEnabled, hwPimInterfaceBidirCapable, hwPimNeighborGenerationIdPresent, hwPimNeighborGenerationIdValue, hwPimNeighborUpTime, hwPimNeighborExpiryTime, hwPimNeighborDrPriorityPresent, hwPimNeighborDrPriority, hwPimNeighborLanPruneDelayPresent, hwPimNeighborTBit, hwPimNeighborPropagationDelay, hwPimNeighborOverrideInterval, hwPimNeighborBidirCapable, hwPimNbrSecAddress, hwPimNeighborIfName, hwPimInterfaceName } STATUS current DESCRIPTION "A collection of read-only objects used to report local PIM topology." ::= { hwPimMibGroups 1 } hwPimNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { hwPimNeighborLoss } STATUS current DESCRIPTION "A collection of notifications for signaling important PIM events." ::= { hwPimMibGroups 2 } hwPimTuningParametersGroup OBJECT-GROUP OBJECTS { hwPimKeepalivePeriod, hwPimRegisterSuppressionTime, hwPimInterfaceDrPriority, hwPimInterfaceHelloInterval, hwPimInterfaceTrigHelloInterval, hwPimInterfaceJoinPruneInterval, hwPimInterfacePropagationDelay, hwPimInterfaceOverrideInterval, hwPimInterfaceDomainBorder, hwPimInterfaceStubInterface, hwPimInterfaceStatus, hwPimInterfaceStorageType } STATUS current DESCRIPTION "A collection of writeable objects used to configure PIM behavior and to tune performance." ::= { hwPimMibGroups 3 } hwPimRouterStatisticsGroup OBJECT-GROUP OBJECTS { hwPimStarGEntries, hwPimStarGIEntries, hwPimSGEntries, hwPimSGIEntries, hwPimSGRptEntries, hwPimSGRptIEntries } STATUS current DESCRIPTION "A collection of statistics global to the PIM router." ::= { hwPimMibGroups 4 } hwPimSsmGroup OBJECT-GROUP OBJECTS { hwPimSGUpTime, hwPimSGPimMode, hwPimSGUpstreamJoinState, hwPimSGUpstreamJoinTimer, hwPimSGUpstreamNeighbor, hwPimSGRpfIfIndex, hwPimSGRpfNextHopType, hwPimSGRpfNextHop, hwPimSGRpfRouteProtocol, hwPimSGRpfRouteAddress, hwPimSGRpfRoutePrefixLength, hwPimSGRpfRouteMetricPref, hwPimSGRpfRouteMetric, hwPimSGSptBit, hwPimSGKeepaliveTimer, hwPimSGDrRegisterState, hwPimSGDrRegisterStopTimer, hwPimSGRpRegisterPmbrAddressType, hwPimSGRpRegisterPmbrAddress, hwPimSGIUpTime, hwPimSGILocalMembership, hwPimSGIJoinPruneState, hwPimSGIPrunePendingTimer, hwPimSGIJoinExpiryTimer, hwPimSGIAssertState, hwPimSGIAssertTimer, hwPimSGIAssertWinnerAddressType, hwPimSGIAssertWinnerAddress, hwPimSGIAssertWinnerMetricPref, hwPimSGIAssertWinnerMetric } STATUS current DESCRIPTION "A collection of objects to support management of PIM routers running the PIM SSM (Source Specific Multicast) protocol, in PIM mode SM (Sparse Mode)." ::= { hwPimMibGroups 5 } hwPimRpConfigGroup OBJECT-GROUP OBJECTS { hwPimGroupMappingPimMode, hwPimGroupMappingPrecedence } STATUS current DESCRIPTION "A collection of objects to support configuration of RPs (Rendezvous Points) and Group Mappings." ::= { hwPimMibGroups 6 } hwPimSmGroup OBJECT-GROUP OBJECTS { hwPimStarGUpTime, hwPimStarGPimMode, hwPimStarGRpAddressType, hwPimStarGRpAddress, hwPimStarGPimModeOrigin, hwPimStarGRpIsLocal, hwPimStarGUpstreamJoinState, hwPimStarGUpstreamJoinTimer, hwPimStarGUpstreamNeighborType, hwPimStarGUpstreamNeighbor, hwPimStarGRpfIfIndex, hwPimStarGRpfNextHopType, hwPimStarGRpfNextHop, hwPimStarGRpfRouteProtocol, hwPimStarGRpfRouteAddress, hwPimStarGRpfRoutePrefixLength, hwPimStarGRpfRouteMetricPref, hwPimStarGRpfRouteMetric, hwPimStarGIUpTime, hwPimStarGILocalMembership, hwPimStarGIJoinPruneState, hwPimStarGIPrunePendingTimer, hwPimStarGIJoinExpiryTimer, hwPimStarGIAssertState, hwPimStarGIAssertTimer, hwPimStarGIAssertWinnerAddressType, hwPimStarGIAssertWinnerAddress, hwPimStarGIAssertWinnerMetricPref, hwPimStarGIAssertWinnerMetric, hwPimSGRptUpTime, hwPimSGRptUpstreamPruneState, hwPimSGRptUpstreamOverrideTimer, hwPimSGRptIUpTime, hwPimSGRptILocalMembership, hwPimSGRptIJoinPruneState, hwPimSGRptIPrunePendingTimer, hwPimSGRptIPruneExpiryTimer } STATUS current DESCRIPTION "A collection of objects to support management of PIM routers running PIM-SM (Sparse Mode). The groups hwPimSsmGroup and hwPimRpConfigGroup are also required." ::= { hwPimMibGroups 7 } hwPimBidirGroup OBJECT-GROUP OBJECTS { hwPimInterfaceDfElectionRobustness } STATUS current DESCRIPTION "A collection of objects to support management of PIM routers running BIDIR mode. The groups hwPimSsmGroup, hwPimSmGroup and hwPimRpConfigGroup are also required." ::= { hwPimMibGroups 8 } hwPimNetMgmtNotificationObjects OBJECT-GROUP OBJECTS { hwPimInvalidRegisterNotificationPeriod, hwPimInvalidRegisterMsgsRcvd, hwPimInvalidRegisterAddressType, hwPimInvalidRegisterOrigin, hwPimInvalidRegisterGroup, hwPimInvalidRegisterRp, hwPimInvalidJoinPruneNotificationPeriod, hwPimInvalidJoinPruneMsgsRcvd, hwPimInvalidJoinPruneAddressType, hwPimInvalidJoinPruneOrigin, hwPimInvalidJoinPruneGroup, hwPimInvalidJoinPruneRp, hwPimRpMappingNotificationPeriod, hwPimRpMappingChangeCount, hwPimInterfaceElectionNotificationPeriod, hwPimInterfaceElectionWinCount, hwPimNeighborAddNotificationPeriod, hwPimNeighborAddCount, hwPimGRStartTime, hwPimGRInterval, hwPimGREndTime } STATUS current DESCRIPTION "A collection of objects to support notification of PIM network management events." ::= { hwPimMibGroups 11 } hwPimNetMgmtNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { hwPimInvalidRegister, hwPimInvalidJoinPrune, hwPimRpMappingChange, hwPimInterfaceElection, hwPimNeighborAdd, hwPimGRStart, hwPimGREnd } STATUS current DESCRIPTION "A collection of notifications for signaling PIM network management events." ::= { hwPimMibGroups 12 } hwPimDiagnosticsGroup OBJECT-GROUP OBJECTS { hwPimInAsserts, hwPimOutAsserts, hwPimLastAssertInterface, hwPimLastAssertGroupAddressType, hwPimLastAssertGroupAddress, hwPimLastAssertSourceAddressType, hwPimLastAssertSourceAddress, hwPimNeighborLossNotificationPeriod, hwPimNeighborLossCount } STATUS current DESCRIPTION "Objects providing additional diagnostics related to a PIM router." ::= { hwPimMibGroups 13 } hwPimDmGroup OBJECT-GROUP OBJECTS { hwPimRefreshInterval, hwPimInterfacePruneLimitInterval, hwPimInterfaceGraftRetryInterval, hwPimInterfaceSrPriorityEnabled, hwPimNeighborSrCapable, hwPimSGUpstreamPruneState, hwPimSGUpstreamPruneLimitTimer, hwPimSGOriginatorState, hwPimSGSourceActiveTimer, hwPimSGStateRefreshTimer } STATUS current DESCRIPTION "A collection of objects required for management of PIM Dense Mode (PIM-DM) function. The groups hwPimSsmGroup and hwPimSmGroup are also required." REFERENCE "RFC 3973" ::= { hwPimMibGroups 14 } hwPimDeviceStorageGroup OBJECT-GROUP OBJECTS { hwPimDeviceConfigStorageType } STATUS current DESCRIPTION "An object that specifies the volatility of global PIM configuration settings on this device." ::= { hwPimMibGroups 15 } END