-- -- HUAWEI-PORT-MIB.mib -- Monday, November 28, 2011 at 15:24:55 -- HUAWEI-PORT-MIB DEFINITIONS ::= BEGIN IMPORTS ImaFrameLength, ImaGroupState FROM HUAWEI-IMA-MIB hwDatacomm FROM HUAWEI-MIB InterfaceIndex FROM IF-MIB EnabledStatus FROM P-BRIDGE-MIB OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF IpAddress, Integer32, Unsigned32, Counter64, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI TruthValue, RowStatus FROM SNMPv2-TC; -- 1.3.6.1.4.1.2011.5.25.157 hwPortMIB MODULE-IDENTITY LAST-UPDATED "201105180930Z" -- May 18, 2011 at 09:30 GMT ORGANIZATION "Huawei Technologies Co.,Ltd." CONTACT-INFO "VRP Team Huawei Technologies Co.,Ltd. Huawei Bld.,NO.3 Xinxi Rd., Shang-Di Information Industry Base, Hai-Dian District Beijing P.R. China http://www.huawei.com Zip:100085 " DESCRIPTION "The private mib file includes the general extent information of the device.hwDatacomm(157).hwPortMIB" ::= { hwDatacomm 157 } -- -- Node definitions -- -- 1.3.6.1.4.1.2011.5.25.157.1 hwPortMIBObjects OBJECT IDENTIFIER ::= { hwPortMIB 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.1 hwEthernet OBJECT IDENTIFIER ::= { hwPortMIBObjects 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.1.1 hwEthernetTable OBJECT-TYPE SYNTAX SEQUENCE OF HwEthernetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the physical attributes of the Ethernet interface. This table lists the physical attributes of various Ethernet interfaces." ::= { hwEthernet 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.1.1.1 hwEthernetEntry OBJECT-TYPE SYNTAX HwEthernetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the physical attributes of the Ethernet interface. This table lists the physical attributes of various Ethernet interfaces." INDEX { hwEthernetIfIndex } ::= { hwEthernetTable 1 } HwEthernetEntry ::= SEQUENCE { hwEthernetIfIndex InterfaceIndex, hwEthernetLoopback INTEGER, hwEthernetPortType INTEGER, hwEthernetSpeedSet INTEGER, hwEthernetDuplex INTEGER, hwEthernetNegotiation EnabledStatus, hwEthernetPortTypeOperate INTEGER, hwEthernetClock INTEGER, hwEthernetFlagJ0Mode INTEGER, hwEthernetFlagJ0Value Integer32, hwEthernetFlagJ0Trace OCTET STRING, hwEthernetFlagJ1Mode INTEGER, hwEthernetFlagJ1Value Integer32, hwEthernetFlagJ1Trace OCTET STRING, hwEthernetFlagC2Value Integer32, hwEthernetUpHoldTime Integer32, hwEthernetDownHoldTime Integer32, hwEthernetSubinterfaceStatisticEnable EnabledStatus, hwEthernetFlowControl INTEGER, hwEthernetOffline INTEGER, hwEthernetSetTransferMode INTEGER, hwEthernetJumboframeMaxLength Integer32, hwEthernetComboType INTEGER, hwEthernetPortMode INTEGER, hwEthernetNegotiationMode INTEGER } -- 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.1 hwEthernetIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index(es) of port(s) present on the device ." ::= { hwEthernetEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.11 hwEthernetLoopback OBJECT-TYPE SYNTAX INTEGER { otherLoop(1), stopLoopback(2), local(3), remote(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The local loopback of an Ethernet interface is used to test the interface itself. If an interface works in a normal situation, disable the local loopback. By default, stopLoopback is used." ::= { hwEthernetEntry 11 } -- 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.12 hwEthernetPortType OBJECT-TYPE SYNTAX INTEGER { other(1), copper(2), fiber(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the type of the Ethernet interface: an optical interface or an electrical interface." ::= { hwEthernetEntry 12 } -- 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.13 hwEthernetSpeedSet OBJECT-TYPE SYNTAX INTEGER { other(1), speed10(2), speed100(3), speed1000(4), speed10000(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the speed of the Ethernet interface. This parameter takes effect only on some Ethernet electrical interfaces rather than optical interfaces. The parameter can be 10 M, 100 M, 1000 M, 10000 M." ::= { hwEthernetEntry 13 } -- 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.14 hwEthernetDuplex OBJECT-TYPE SYNTAX INTEGER { full(1), half(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the duplex mode of the Ethernet interface. An electrical Ethernet interface can work in half-duplex mode or full-duplex mode. An optical Ethernet can work only in full-duplex mode." ::= { hwEthernetEntry 14 } -- 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.15 hwEthernetNegotiation OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the auto-negotiation mode of the Ethernet electrical interface. By default, auto-negotiation is enabled. The three objects, hwEthernetSpeedSet, hwEthernetDuplex, and hwEthernetNegotiation are associated with each other. If the auto-negotiation of hwEthernetNegotiation is enabled, the values of hwEthernetSpeedSet and hwEthernetDuplex are auto-negotiated. If hwEthernetSpeedSet is set to a certain value, hwEthernetDuplex is modified to the default value full, and hwEthernetNegotiation is automatically changed to disable. If the auto-negotiation of hwEthernetNegotiation is enabled, hwEthernetDuplex cannot be set." ::= { hwEthernetEntry 15 } -- 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.16 hwEthernetPortTypeOperate OBJECT-TYPE SYNTAX INTEGER { other(1), copper(2), fiber100(3), fiber1000(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the link type of the Ethernet interface. The type can be optical link or electrical link. This parameter takes effect only on specific Ethernet interfaces." ::= { hwEthernetEntry 16 } -- 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.20 hwEthernetClock OBJECT-TYPE SYNTAX INTEGER { master(1), slave(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the mode of the clock. The mode can be master or slave. By default, the mode of a clock is slave. This parameter takes effect only on the WAN board." ::= { hwEthernetEntry 20 } -- 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.21 hwEthernetFlagJ0Mode OBJECT-TYPE SYNTAX INTEGER { j01ByteMode(1), j016ByteMode(2), j064ByteOrNullMode(3), peer(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Before the 10 GE WAN board processes packets, the overhead byte must be configured on the interface. The overhead byte for the SDH frame, j0: Set section trace byte The default value is j016ByteMode(2):hwEthernetFlagJ0Trace:NetEngine" ::= { hwEthernetEntry 21 } -- 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.22 hwEthernetFlagJ0Value OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "j01ByteMode Value. When hwEthernetFlagJ0Mode is set to j01ByteMode, this parameter takes effect." ::= { hwEthernetEntry 22 } -- 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.23 hwEthernetFlagJ0Trace OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set section trace byte. When hwEthernetFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this variable takes effect. When hwEthernetFlagJ0Mode is set to j016ByteMode, this variable is up to 15 characters trace byte. When hwEthernetFlagJ0Mode is set to j064ByteOrNullMode, this variable is up to 64 characters trace byte." ::= { hwEthernetEntry 23 } -- 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.24 hwEthernetFlagJ1Mode OBJECT-TYPE SYNTAX INTEGER { j11ByteMode(1), j116ByteMode(2), j164ByteOrNullMode(3), peer(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the overhead byte of the SDH frame. j1:sets path trace byte. The default value is j116ByteMode(2) hwEthernetFlagJ1Trace NetEngine." ::= { hwEthernetEntry 24 } -- 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.25 hwEthernetFlagJ1Value OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "j11ByteMode Value. When hwEthernetFlagJ1Mode is set to j11ByteMode, this parameter takes effect." ::= { hwEthernetEntry 25 } -- 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.26 hwEthernetFlagJ1Trace OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set path trace byte. When hwEthernetFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this variable takes effect. When hwEthernetFlagJ1Mode is set to j116ByteMode, this variable is up to 15 characters trace byte. When hwEthernetFlagJ1Mode is set to j164ByteOrNullMode, this variable is up to 64 characters trace byte." ::= { hwEthernetEntry 26 } -- 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.27 hwEthernetFlagC2Value OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 0x02." ::= { hwEthernetEntry 27 } -- 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.31 hwEthernetUpHoldTime OBJECT-TYPE SYNTAX Integer32 (0..86400000) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the response time to the event that the port turns Up. The units of hwEthernetUpHoldTime is millisecond." ::= { hwEthernetEntry 31 } -- 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.32 hwEthernetDownHoldTime OBJECT-TYPE SYNTAX Integer32 (0..86400000) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the response time to the event that the port turns Down. The units of hwEthernetDownHoldTime is millisecond." ::= { hwEthernetEntry 32 } -- 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.33 hwEthernetSubinterfaceStatisticEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the statistical function of the sub-interface." ::= { hwEthernetEntry 33 } -- 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.34 hwEthernetFlowControl OBJECT-TYPE SYNTAX INTEGER { receive(1), send(2), both(3), none(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set flow control of this port." ::= { hwEthernetEntry 34 } -- 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.35 hwEthernetOffline OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set Line protocol state to down of this port." ::= { hwEthernetEntry 35 } -- 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.36 hwEthernetSetTransferMode OBJECT-TYPE SYNTAX INTEGER { lan(1), wan(2), none(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set transfer mode of this port." ::= { hwEthernetEntry 36 } -- 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.37 hwEthernetJumboframeMaxLength OBJECT-TYPE SYNTAX Integer32 (1536..13296) MAX-ACCESS read-write STATUS current DESCRIPTION "Set the jumboframe max length of this port." ::= { hwEthernetEntry 37 } -- 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.38 hwEthernetComboType OBJECT-TYPE SYNTAX INTEGER { auto(1), copper(2), fiber(3), other(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "combo mode of this port." ::= { hwEthernetEntry 38 } -- 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.39 hwEthernetPortMode OBJECT-TYPE SYNTAX INTEGER { copper(1), fiber(2), other(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates combo mode of this port." ::= { hwEthernetEntry 39 } -- 1.3.6.1.4.1.2011.5.25.157.1.1.1.1.40 hwEthernetNegotiationMode OBJECT-TYPE SYNTAX INTEGER { notsupport(1), auto(2), master(3), slave(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set negotiation-mode for phy of electronic GE port.The mode is uesed for synchronizing clock. " ::= { hwEthernetEntry 40 } -- 1.3.6.1.4.1.2011.5.25.157.1.2 hwPos OBJECT IDENTIFIER ::= { hwPortMIBObjects 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.2.1 hwPosTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPosEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the physical attributes of the POS interface. This table lists the physical attributes of the POS interface." ::= { hwPos 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.2.1.1 hwPosEntry OBJECT-TYPE SYNTAX HwPosEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the physical attributes of the POS interface. This table lists the physical attributes of the POS interface." INDEX { hwPosIfIndex } ::= { hwPosTable 1 } HwPosEntry ::= SEQUENCE { hwPosIfIndex InterfaceIndex, hwPosLinkProtocol INTEGER, hwPosFrameFormat INTEGER, hwPosLoopback INTEGER, hwPosScramble EnabledStatus, hwPosClock INTEGER, hwPosCrcVerifyCode INTEGER, hwPosFlagJ0Mode INTEGER, hwPosFlagJ0Value Integer32, hwPosFlagJ0Trace OCTET STRING, hwPosFlagJ1Mode INTEGER, hwPosFlagJ1Value Integer32, hwPosFlagJ1Trace OCTET STRING, hwPosFlagC2Value Integer32 } -- 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.1 hwPosIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index(es) of port(s) present on the device ." ::= { hwPosEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.11 hwPosLinkProtocol OBJECT-TYPE SYNTAX INTEGER { ietf(1), nonstandard(2), hdlc(3), ppp(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the link layer protocol of the POS interface. By default, on a POS interface, PPP serves as the link layer protocol." ::= { hwPosEntry 11 } -- 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.12 hwPosFrameFormat OBJECT-TYPE SYNTAX INTEGER { sonet(1), sdh(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the frame type of the POS interface. By default, the frame type of the POS interface is SDH. This variable identifies whether a SONET or a SDH signal is used across this interface." ::= { hwPosEntry 12 } -- 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.13 hwPosLoopback OBJECT-TYPE SYNTAX INTEGER { otherLoop(1), stopLoopback(2), local(3), remote(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The local loopback of a POS interface is used to test the interface itself. If an interface works in a normal situation, disable the local loopback. By default, stopLoopback is used." ::= { hwPosEntry 13 } -- 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.14 hwPosScramble OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the scramble function of payload. By default, the scramble function of payload is enabled." ::= { hwPosEntry 14 } -- 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.15 hwPosClock OBJECT-TYPE SYNTAX INTEGER { master(1), slave(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the clock is in master mode or slave mode. By default, the clock is in slave mode." ::= { hwPosEntry 15 } -- 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.16 hwPosCrcVerifyCode OBJECT-TYPE SYNTAX INTEGER { crc16(1), crc32(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the length of the CRC verity code. The default value is 32." ::= { hwPosEntry 16 } -- 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.21 hwPosFlagJ0Mode OBJECT-TYPE SYNTAX INTEGER { j01ByteMode(1), j016ByteMode(2), j064ByteOrNullMode(3), peer(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the overhead byte of the SDH frame. j0: sets section trace byte. The default value is j016ByteMode(2);hwPosFlagJ0Trace:NetEngine." ::= { hwPosEntry 21 } -- 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.22 hwPosFlagJ0Value OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the value of j01ByteMode. When hwPosFlagJ0Mode is set to j01ByteMode, hwPosFlagJ0Value takes effect." ::= { hwPosEntry 22 } -- 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.23 hwPosFlagJ0Trace OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set section trace byte. When hwPosFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this variable takes effect. When hwPosFlagJ0Mode is set to j016ByteMode, the value of this variable is up to 15 characters trace byte. When hwPosFlagJ0Mode is set to j064ByteOrNullMode, the value of this variable is up to 64 characters trace byte." ::= { hwPosEntry 23 } -- 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.24 hwPosFlagJ1Mode OBJECT-TYPE SYNTAX INTEGER { j11ByteMode(1), j116ByteMode(2), j164ByteOrNullMode(3), peer(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the overhead byte of the SDH frame. j1: sets path trace byte. The default value is j116ByteMode(2);hwPosFlagJ1Trace:NetEngine." ::= { hwPosEntry 24 } -- 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.25 hwPosFlagJ1Value OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the value of j11ByteMode. When hwPosFlagJ1Mode is set to j11ByteMode, hwPosFlagJ1Value takes effect." ::= { hwPosEntry 25 } -- 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.26 hwPosFlagJ1Trace OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set path trace byte. When hwPosFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this variable takes effect. When hwPosFlagJ1Mode is set to j116ByteMode, this variable is up to 15 characters trace byte. When hwPosFlagJ1Mode is set to j164ByteOrNullMode, this variable is up to 64 characters trace byte." ::= { hwPosEntry 26 } -- 1.3.6.1.4.1.2011.5.25.157.1.2.1.1.27 hwPosFlagC2Value OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 0x02." ::= { hwPosEntry 27 } -- 1.3.6.1.4.1.2011.5.25.157.1.3 hwCpos OBJECT IDENTIFIER ::= { hwPortMIBObjects 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.1 hwCposTable OBJECT-TYPE SYNTAX SEQUENCE OF HwCposEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the physical attributes of the CPOS interface. This table lists the physical attributes of the CPOS interface." ::= { hwCpos 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.1.1 hwCposEntry OBJECT-TYPE SYNTAX HwCposEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the physical attributes of the CPOS interface. This table lists the physical attributes of the CPOS interface." INDEX { hwCposIfIndex } ::= { hwCposTable 1 } HwCposEntry ::= SEQUENCE { hwCposIfIndex InterfaceIndex, hwCposClock INTEGER, hwCposIfType INTEGER, hwCposFrameFormat INTEGER, hwCposMultiplex INTEGER, hwCposLoopback INTEGER, hwCposFlagJ0Mode INTEGER, hwCposFlagJ0Value Integer32, hwCposFlagJ0Trace OCTET STRING, hwCposFlagJ1Mode INTEGER, hwCposFlagJ1Value Integer32, hwCposFlagJ1Trace OCTET STRING, hwCposFlagC2Value Integer32, hwCposB1SdAlarmThreshold Integer32, hwCposB1ExcAlarmThreshold Integer32, hwCposB2SdAlarmThreshold Integer32, hwCposB2ExcAlarmThreshold Integer32, hwCposB3SdAlarmThreshold Integer32, hwCposB3ExcAlarmThreshold Integer32, hwCposLpBipSdAlarmThreshold Integer32, hwCposLpBipExcAlarmThreshold Integer32, hwCposHighPathNumber Integer32, hwCposLowPathNumber Integer32, hwCposMappingMode INTEGER } -- 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.1 hwCposIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index(es) of port(s) present on the device ." ::= { hwCposEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.11 hwCposClock OBJECT-TYPE SYNTAX INTEGER { master(1), slave(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the clock is in master mode or slave mode. By default, the clock is in slave mode." ::= { hwCposEntry 11 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.12 hwCposIfType OBJECT-TYPE SYNTAX INTEGER { stm1(1), stm16(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the interface type." ::= { hwCposEntry 12 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.13 hwCposFrameFormat OBJECT-TYPE SYNTAX INTEGER { sonet(1), sdh(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the frame type of the CPOS interface. By default, the frame type of the CPOS interface is SDH." ::= { hwCposEntry 13 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.14 hwCposMultiplex OBJECT-TYPE SYNTAX INTEGER { au3(1), au4(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the multiplex mode of the AUG. By default, the multiplex mode of the AUG is au-4." ::= { hwCposEntry 14 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.15 hwCposLoopback OBJECT-TYPE SYNTAX INTEGER { otherloop(1), stopLoopback(2), local(3), remote(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the loopback function of the CPOS interface. By default, the loopback function is disabled." ::= { hwCposEntry 15 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.21 hwCposFlagJ0Mode OBJECT-TYPE SYNTAX INTEGER { j01ByteMode(1), j016ByteMode(2), j064ByteOrNullMode(3), peer(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the overhead byte of the SDH frame. j0: sets section trace byte. The default value is j016ByteMode(2);hwCposFlagJ0Trace NetEngine." ::= { hwCposEntry 21 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.22 hwCposFlagJ0Value OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-write STATUS current DESCRIPTION "j01ByteMode Value . When hwCposFlagJ0Mode is set to j01ByteMode, hwCposFlagJ0Value takes effect." ::= { hwCposEntry 22 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.23 hwCposFlagJ0Trace OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set section trace byte. When hwCposFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this variable takes effect. When hwCposFlagJ0Mode is set to j016ByteMode, this variable is up to 15 characters trace byte. When hwCposFlagJ0Mode is set to j064ByteOrNullMode, this variable is up to 64 characters trace byte." ::= { hwCposEntry 23 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.24 hwCposFlagJ1Mode OBJECT-TYPE SYNTAX INTEGER { j11ByteMode(1), j116ByteMode(2), j164ByteOrNullMode(3), peer(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the overhead byte of the SDH frame. j1: sets path trace byte. The default value is j116ByteMode(2);hwCposFlagJ1Trace NetEngine." ::= { hwCposEntry 24 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.25 hwCposFlagJ1Value OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the value of j11ByteMode. When hwCposFlagJ1Mode is set to j11ByteMode, hwCposFlagJ1Value takes effect." ::= { hwCposEntry 25 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.26 hwCposFlagJ1Trace OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set path trace byte. When hwCposFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this variable takes effect. When hwCposFlagJ1Mode is set to j116ByteMode, this variable is a string up to 15 characters trace byte. When hwCposFlagJ1Mode is set to j164ByteOrNullMode, this variable is a string up to 64 characters trace byte." ::= { hwCposEntry 26 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.27 hwCposFlagC2Value OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 22(0x16)." ::= { hwCposEntry 27 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.28 hwCposB1SdAlarmThreshold OBJECT-TYPE SYNTAX Integer32 (1..9) MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of B1 threshold crossing alarm." DEFVAL { 6 } ::= { hwCposEntry 28 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.29 hwCposB1ExcAlarmThreshold OBJECT-TYPE SYNTAX Integer32 (1..9) MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of B1 threshold crossing alarm." DEFVAL { 3 } ::= { hwCposEntry 29 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.30 hwCposB2SdAlarmThreshold OBJECT-TYPE SYNTAX Integer32 (1..9) MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of B2 threshold crossing alarm." DEFVAL { 6 } ::= { hwCposEntry 30 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.31 hwCposB2ExcAlarmThreshold OBJECT-TYPE SYNTAX Integer32 (1..9) MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of B2 threshold crossing alarm." DEFVAL { 3 } ::= { hwCposEntry 31 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.32 hwCposB3SdAlarmThreshold OBJECT-TYPE SYNTAX Integer32 (1..9) MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of B3 threshold crossing alarm." DEFVAL { 6 } ::= { hwCposEntry 32 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.33 hwCposB3ExcAlarmThreshold OBJECT-TYPE SYNTAX Integer32 (1..9) MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of B3 threshold crossing alarm." DEFVAL { 3 } ::= { hwCposEntry 33 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.34 hwCposLpBipSdAlarmThreshold OBJECT-TYPE SYNTAX Integer32 (1..9) MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of BIP2 threshold crossing alarm." DEFVAL { 6 } ::= { hwCposEntry 34 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.35 hwCposLpBipExcAlarmThreshold OBJECT-TYPE SYNTAX Integer32 (1..9) MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of BIP2 threshold crossing alarm." DEFVAL { 3 } ::= { hwCposEntry 35 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.36 hwCposHighPathNumber OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 22(0x16)." ::= { hwCposEntry 36 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.37 hwCposLowPathNumber OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 22(0x16)." ::= { hwCposEntry 37 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.1.1.38 hwCposMappingMode OBJECT-TYPE SYNTAX INTEGER { h-mode(1), l-mode(2), a-mode(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the mapping mode of cpos port, default if h-mode(1)." ::= { hwCposEntry 38 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.2 hwPortPhysicalHpIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the higher order path number." ::= { hwCpos 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.3 hwPortPhysicalLpIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the low order path number." ::= { hwCpos 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.4 hwCposLpTable OBJECT-TYPE SYNTAX SEQUENCE OF HwCposLpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { hwCpos 4 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.4.1 hwCposLpEntry OBJECT-TYPE SYNTAX HwCposLpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { hwCposLpIfIndex, hwCposLpId } ::= { hwCposLpTable 1 } HwCposLpEntry ::= SEQUENCE { hwCposLpIfIndex InterfaceIndex, hwCposLpId Integer32, hwCposFlagJ2Mode INTEGER, hwCposFlagJ2Value Integer32, hwCposFlagJ2Trace OCTET STRING } -- 1.3.6.1.4.1.2011.5.25.157.1.3.4.1.1 hwCposLpIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { hwCposLpEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.4.1.2 hwCposLpId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { hwCposLpEntry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.4.1.3 hwCposFlagJ2Mode OBJECT-TYPE SYNTAX INTEGER { j21ByteMode(1), j216ByteMode(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { hwCposLpEntry 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.4.1.4 hwCposFlagJ2Value OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { hwCposLpEntry 4 } -- 1.3.6.1.4.1.2011.5.25.157.1.3.4.1.5 hwCposFlagJ2Trace OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { hwCposLpEntry 5 } -- 1.3.6.1.4.1.2011.5.25.157.1.4 hwDs0ChannelBundle OBJECT IDENTIFIER ::= { hwPortMIBObjects 4 } -- 1.3.6.1.4.1.2011.5.25.157.1.4.1 hwDs0ChannelBundleTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDs0ChannelBundleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to bundle timeslots of CE1/CT1 interfaces." ::= { hwDs0ChannelBundle 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.4.1.1 hwDs0ChannelBundleEntry OBJECT-TYPE SYNTAX HwDs0ChannelBundleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to bundle timeslots of CE1/CT1 interfaces." INDEX { hwDs0ChannelBundleParentIfIndex, hwDs0ChannelBundleDs1ChannelId, hwDs0ChannelBundleId } ::= { hwDs0ChannelBundleTable 1 } HwDs0ChannelBundleEntry ::= SEQUENCE { hwDs0ChannelBundleParentIfIndex InterfaceIndex, hwDs0ChannelBundleDs1ChannelId Integer32, hwDs0ChannelBundleId Integer32, hwDs0ChannelBundleIfIndex InterfaceIndex, hwDs0ChannelBundleTimeSlots OCTET STRING, hwDs0ChannelBundleSpeed INTEGER, hwDs0ChannelBundleTimeSlot0 TruthValue, hwDs0ChannelBundleIsMasterPW INTEGER, hwDs0ChannelBundleMasterPWStatus INTEGER, hwDs0ChannelBundlePortName OCTET STRING, hwDs0ChannelBundleRowStatus RowStatus } -- 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.1 hwDs0ChannelBundleParentIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of the parent interface." ::= { hwDs0ChannelBundleEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.2 hwDs0ChannelBundleDs1ChannelId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the channel ID." ::= { hwDs0ChannelBundleEntry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.3 hwDs0ChannelBundleId OBJECT-TYPE SYNTAX Integer32 (0..30) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index number of the channel set." ::= { hwDs0ChannelBundleEntry 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.11 hwDs0ChannelBundleIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the index of the serial interface formed by the timeslot binding." ::= { hwDs0ChannelBundleEntry 11 } -- 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.12 hwDs0ChannelBundleTimeSlots OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..61)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the number of the range of the timeslot to be bound. The value is an integer ranging from 0 to 31. Multiple timeslots are separated by ','. The range of timeslot is expressed by using '-'. For E1 card mode: If the timeslots are '0-31', it means unframed format, If the timeslots are '0-30', it means framed format, For T1 card mode: If the timeslots are '0-23', it means unframed format, If the timeslots are '0-22', it means framed format, and hwDs0ChannelBundleDs1ChannelId and hwDs0ChannelBundleId should be zero." ::= { hwDs0ChannelBundleEntry 12 } -- 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.13 hwDs0ChannelBundleSpeed OBJECT-TYPE SYNTAX INTEGER { s56(1), s64(2) } UNITS "kilo bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "Configures the mode to configure the timeslots. If the parameter 56 k is selected, the timeslots are bound in the mode of N x 56 kbit/s. If the parameter 64 k is selected, the timeslots are bound in the mode of N x 64 kbit/s. The default value is 64kbit/s." DEFVAL { 64 } ::= { hwDs0ChannelBundleEntry 13 } -- 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.14 hwDs0ChannelBundleTimeSlot0 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the timeslot0 to be bound or a single channel. The ture value indicates it will be create TDM channel." ::= { hwDs0ChannelBundleEntry 14 } -- 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.15 hwDs0ChannelBundleIsMasterPW OBJECT-TYPE SYNTAX INTEGER { notacrpw(0), masterpw(1), notmasterpw(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the pw configed on this port is master pw." ::= { hwDs0ChannelBundleEntry 15 } -- 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.16 hwDs0ChannelBundleMasterPWStatus OBJECT-TYPE SYNTAX INTEGER { unlock(0), lock(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of master pw." ::= { hwDs0ChannelBundleEntry 16 } -- 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.17 hwDs0ChannelBundlePortName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Port name." ::= { hwDs0ChannelBundleEntry 17 } -- 1.3.6.1.4.1.2011.5.25.157.1.4.1.1.51 hwDs0ChannelBundleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create or delete an object." ::= { hwDs0ChannelBundleEntry 51 } -- 1.3.6.1.4.1.2011.5.25.157.1.5 hwDs1 OBJECT IDENTIFIER ::= { hwPortMIBObjects 5 } -- 1.3.6.1.4.1.2011.5.25.157.1.5.1 hwDs1Table OBJECT-TYPE SYNTAX SEQUENCE OF HwDs1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists all E1/CE1 interfaces or T1/CT1 interfaces. After the mode of E3/CE3 interfaces or T3/CT3 interfaces is set to channelized, this table can be used to create E1/CE1, or T1/CT1, or E3/CE3, or T3/CT3 interfaces." ::= { hwDs1 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.5.1.1 hwDs1Entry OBJECT-TYPE SYNTAX HwDs1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists all E1/CE1 interfaces or T1/CT1 interfaces. After the mode of E3/CE3 interfaces or T3/CT3 interfaces is set to channelized, this table can be used to create E1/CE1, or T1/CT1, or E3/CE3, or T3/CT3 interfaces." INDEX { hwDs1ParentIfIndex, hwDs1ChannelId, hwDs1IfIndex } ::= { hwDs1Table 1 } HwDs1Entry ::= SEQUENCE { hwDs1ParentIfIndex InterfaceIndex, hwDs1ChannelId Integer32, hwDs1IfIndex InterfaceIndex, hwDs1ChannelType INTEGER, hwDs1IfType INTEGER, hwDs1Channelized TruthValue, hwDs1CodeType INTEGER, hwDs1Clock INTEGER, hwDs1FrameFormat INTEGER, hwDs1Cable INTEGER, hwDs1Loopback INTEGER, hwDs1ClockRecoveryDomain Integer32, hwDs1PWClockDomain Integer32, hwDs1WorkMode Integer32, hwDs1EsAlarmTriggerThreshold Integer32, hwDs1EsAlarmResumeThreshold Integer32, hwDs1RowStatus RowStatus, hwDs1Lbo INTEGER, hwDs1CableLength INTEGER } -- 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.1 hwDs1ParentIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of the parent interface." ::= { hwDs1Entry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.2 hwDs1ChannelId OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the channel ID." ::= { hwDs1Entry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.3 hwDs1IfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the interface index." ::= { hwDs1Entry 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.11 hwDs1ChannelType OBJECT-TYPE SYNTAX INTEGER { t1(1), e1(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the interface type. The type can be E1/CE1 or T1/CT1." ::= { hwDs1Entry 11 } -- 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.12 hwDs1IfType OBJECT-TYPE SYNTAX INTEGER { e3(1), t3(2), cpos(3), atm(4), none(255) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the interface tyep. e3: is multiplexed by CE3 interfaces. t3: is multiplexed by CT3 interfaces. cpos: is multiplexed by CPOS interfaces. atm: is multiplexed by ATM interfaces. none: indicates the physical interface. default:none" DEFVAL { none } ::= { hwDs1Entry 12 } -- 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.13 hwDs1Channelized OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the working mode of the interface. true: indicates the channelized mode. false: indicates the clear channel mode. The default is true." DEFVAL { true } ::= { hwDs1Entry 13 } -- 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.14 hwDs1CodeType OBJECT-TYPE SYNTAX INTEGER { ami(1), hdb3(2), b8zs(3), none(255) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the code type of the interface. ami: is short for Alternate Mark Inversion. hdb3: is short for High Density Bipolar of Order 3. b8zs: is short for Bipolar with 8-Zero Substitution. none: is not supported" DEFVAL { hdb3 } ::= { hwDs1Entry 14 } -- 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.15 hwDs1Clock OBJECT-TYPE SYNTAX INTEGER { master(1), slave(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the clock mode of the interface. master: indicates that the clock works in master mode and uses the internal clock signal. slave: indicates that the clock works in slave mode and uses the line clock signal." ::= { hwDs1Entry 15 } -- 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.16 hwDs1FrameFormat OBJECT-TYPE SYNTAX INTEGER { esf(1), sf(2), noCrc4(3), crc(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the frame format of the interface. crc4: indicates that the frame format is CRC4. no-crc4: indicates that the frame format is no-CRC4. sf: indicates that the frame format is Super Frame. esf: indicates that the frame format is Extended Super Frame. By default, the frame format of an E1 interface is no-crc4. By default, the frame format of a T1 interface is esf." ::= { hwDs1Entry 16 } -- 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.17 hwDs1Cable OBJECT-TYPE SYNTAX INTEGER { long(1), short(2), none(255) } MAX-ACCESS read-create STATUS current DESCRIPTION "The cable command takes effect only if the E1 interface card uses 75-ohm coaxial cable. The default is short. If no cable is connected, this parameter is displayed as null." DEFVAL { short } ::= { hwDs1Entry 17 } -- 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.18 hwDs1Loopback OBJECT-TYPE SYNTAX INTEGER { local(1), remote(2), payload(3), cell(4), none(255) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable the loopback function of the interface. local: enables the local loopback on the interface. remote: enables the remote loopback on the interface. payload: enables the remote payload loopback on the interface. cell: enables the local cell loopback. The local cell loopback is used to test the local physical chip." DEFVAL { none } ::= { hwDs1Entry 18 } -- 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.19 hwDs1ClockRecoveryDomain OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the clock recovery domain of the interface." DEFVAL { 0 } ::= { hwDs1Entry 19 } -- 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.20 hwDs1PWClockDomain OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the clock recovery domain of the interface." DEFVAL { 0 } ::= { hwDs1Entry 20 } -- 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.21 hwDs1WorkMode OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the clock recovery domain of the interface." ::= { hwDs1Entry 21 } -- 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.22 hwDs1EsAlarmTriggerThreshold OBJECT-TYPE SYNTAX Integer32 (1..900) MAX-ACCESS read-write STATUS current DESCRIPTION "The trigger threshold of code violation count threshold crossing alarm of E1 line side ." DEFVAL { 65 } ::= { hwDs1Entry 22 } -- 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.23 hwDs1EsAlarmResumeThreshold OBJECT-TYPE SYNTAX Integer32 (1..900) MAX-ACCESS read-write STATUS current DESCRIPTION "The resume threshold of code violation count threshold crossing alarm of E1 line side ." DEFVAL { 30 } ::= { hwDs1Entry 23 } -- 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.51 hwDs1RowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create or delete an object." ::= { hwDs1Entry 51 } -- 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.52 hwDs1Lbo OBJECT-TYPE SYNTAX INTEGER { db75(1), db155(2), db225(3), none(4), notsupport(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "The lbo of T1 port. Unit: db. the value is expanded 10 times,so the real value should be reduced 10 times" ::= { hwDs1Entry 52 } -- 1.3.6.1.4.1.2011.5.25.157.1.5.1.1.53 hwDs1CableLength OBJECT-TYPE SYNTAX INTEGER { length133(1), length266(2), length399(3), length533(4), length655(5), notsupport(6), none(255) } MAX-ACCESS read-create STATUS current DESCRIPTION "The cableLength of T1 port. Unit: feet." ::= { hwDs1Entry 53 } -- 1.3.6.1.4.1.2011.5.25.157.1.6 hwDs3 OBJECT IDENTIFIER ::= { hwPortMIBObjects 6 } -- 1.3.6.1.4.1.2011.5.25.157.1.6.1 hwDs3Table OBJECT-TYPE SYNTAX SEQUENCE OF HwDs3Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists all E3/CE3 interfaces or all T3/CT3 interfaces." ::= { hwDs3 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.6.1.1 hwDs3Entry OBJECT-TYPE SYNTAX HwDs3Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists all E3/CE3 interfaces or all T3/CT3 interfaces." INDEX { hwDs3ParentIfIndex, hwDs3ChannelId, hwDs3IfIndex } ::= { hwDs3Table 1 } HwDs3Entry ::= SEQUENCE { hwDs3ParentIfIndex InterfaceIndex, hwDs3ChannelId Integer32, hwDs3IfIndex InterfaceIndex, hwDs3ChannelType INTEGER, hwDs3IfType INTEGER, hwDs3Channelized TruthValue, hwDs3Clock INTEGER, hwDs3FrameFormat INTEGER, hwDs3Scramble TruthValue, hwDs3Cable INTEGER, hwDs3NationalBit INTEGER, hwDs3Loopback INTEGER, hwDs3CreateSerial TruthValue, hwDs3RowStatus RowStatus } -- 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.1 hwDs3ParentIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of the parent interface." ::= { hwDs3Entry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.2 hwDs3ChannelId OBJECT-TYPE SYNTAX Integer32 (0..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of the parent interface." ::= { hwDs3Entry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.3 hwDs3IfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the interface index." ::= { hwDs3Entry 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.11 hwDs3ChannelType OBJECT-TYPE SYNTAX INTEGER { t3(1), e3(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the interface type. The type can be E3/CE3 or T3/CT3." ::= { hwDs3Entry 11 } -- 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.12 hwDs3IfType OBJECT-TYPE SYNTAX INTEGER { cpos(1), none(255) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the parent interface type of the interface. cpos: is multiplexed by CPOS interfaces. none: indicates the interface is a physical interface. The default is none." DEFVAL { none } ::= { hwDs3Entry 12 } -- 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.13 hwDs3Channelized OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the working mode of the interface. true: indicates the channelized mode. false: indicates the clear channel mode. The default is true." DEFVAL { true } ::= { hwDs3Entry 13 } -- 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.14 hwDs3Clock OBJECT-TYPE SYNTAX INTEGER { master(1), slave(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the clock mode of the interface. master: indicates that the clock works in master mode and uses the internal clock signal. slave: indicates that the clock works in slave mode and uses the line clock signal." ::= { hwDs3Entry 14 } -- 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.15 hwDs3FrameFormat OBJECT-TYPE SYNTAX INTEGER { g832Adm(1), g751Adm(2), g751Plcp(3), cbitAdm(4), cbitPlcp(5), m23Adm(6), m23Plcp(7) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the frame format of the interface." ::= { hwDs3Entry 15 } -- 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.16 hwDs3Scramble OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the scramble function of the interface. true: enables the scramble function. false: disables the scramble function. The default is false." DEFVAL { false } ::= { hwDs3Entry 16 } -- 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.17 hwDs3Cable OBJECT-TYPE SYNTAX INTEGER { long(1), short(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The cable command takes effect only if the E3 interface card uses 75-ohm coaxial cable. The default is short. If no cable is connected, this parameter is displayed as null." DEFVAL { short } ::= { hwDs3Entry 17 } -- 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.18 hwDs3NationalBit OBJECT-TYPE SYNTAX INTEGER { n0(1), n1(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the national bit of the E3/CE3 interface. n0: indicates the national bit is 0 and the interface supports only the communication within a country. n1: indicates the national bit is 1 and the interface supports the international communication. " DEFVAL { n0 } ::= { hwDs3Entry 18 } -- 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.19 hwDs3Loopback OBJECT-TYPE SYNTAX INTEGER { local(1), remote(2), payload(3), cell(4), none(255) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable the loopback function of the interface. local: enables the local loopback on the interface. remote: enables the remote loopback on the interface. payload: enables the remote payload loopback on the interface. cell: enables the local cell loopback. The local cell loopback is used to test the local physical chip." DEFVAL { none } ::= { hwDs3Entry 19 } -- 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.20 hwDs3CreateSerial OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Create serial interface from Ds3 interface. True create serial interface. False destroy serial interface. " DEFVAL { false } ::= { hwDs3Entry 20 } -- 1.3.6.1.4.1.2011.5.25.157.1.6.1.1.51 hwDs3RowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create or delete an object." ::= { hwDs3Entry 51 } -- 1.3.6.1.4.1.2011.5.25.157.1.7 hwBundleSerial OBJECT IDENTIFIER ::= { hwPortMIBObjects 7 } -- 1.3.6.1.4.1.2011.5.25.157.1.7.1 hwBundleSerialTable OBJECT-TYPE SYNTAX SEQUENCE OF HwBundleSerialEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the attribute of the serial interface formed by timeslots. This table lists the physical attributes of the serial interface." ::= { hwBundleSerial 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.7.1.1 hwBundleSerialEntry OBJECT-TYPE SYNTAX HwBundleSerialEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the attribute of the serial interface formed by timeslots. This table lists the physical attributes of the serial interface." INDEX { hwBundleSerialIfIndex } ::= { hwBundleSerialTable 1 } HwBundleSerialEntry ::= SEQUENCE { hwBundleSerialIfIndex InterfaceIndex, hwBundleSerialLinkProtocol INTEGER, hwBundleSerialTimerHold Integer32, hwBundleSerialLoopback TruthValue, hwBundleSerialCrcVerifyCode INTEGER } -- 1.3.6.1.4.1.2011.5.25.157.1.7.1.1.1 hwBundleSerialIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index(es) of serial(s) present on the device ." ::= { hwBundleSerialEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.7.1.1.11 hwBundleSerialLinkProtocol OBJECT-TYPE SYNTAX INTEGER { ietf(1), nonstandard(2), hdlc(3), ppp(4), lapb(5), atm(6), tdm(7), none(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "The link-protocol of interface. The serial(s) always use PPP as its link-protocol for default." ::= { hwBundleSerialEntry 11 } -- 1.3.6.1.4.1.2011.5.25.157.1.7.1.1.12 hwBundleSerialTimerHold OBJECT-TYPE SYNTAX Integer32 (0..32767) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the interval for sending Keepalive packets from the serial interface to the peer. The default is 10 seconds." ::= { hwBundleSerialEntry 12 } -- 1.3.6.1.4.1.2011.5.25.157.1.7.1.1.13 hwBundleSerialLoopback OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "true: enables the loopback on the serial interface. false: disables the loopback on the serial interface. By default, the loopback on the serial interface is disabled." DEFVAL { false } ::= { hwBundleSerialEntry 13 } -- 1.3.6.1.4.1.2011.5.25.157.1.7.1.1.14 hwBundleSerialCrcVerifyCode OBJECT-TYPE SYNTAX INTEGER { crc16(1), crc32(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the length of the CRC verify code. The default is 32." ::= { hwBundleSerialEntry 14 } -- 1.3.6.1.4.1.2011.5.25.157.1.8 hwPhysicalPort OBJECT IDENTIFIER ::= { hwPortMIBObjects 8 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.1 hwPhysicalPortTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPhysicalPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the attribute of the physical port." ::= { hwPhysicalPort 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.1.1 hwPhysicalPortEntry OBJECT-TYPE SYNTAX HwPhysicalPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the attribute of the physical port." INDEX { hwPhysicalPortIfIndex } ::= { hwPhysicalPortTable 1 } HwPhysicalPortEntry ::= SEQUENCE { hwPhysicalPortIfIndex InterfaceIndex, hwPhysicalPortDelayTime Unsigned32, hwPhysicalPortDelayRemainTime Unsigned32, hwPhysicalPortName OCTET STRING, hwPhysicalPortInChassis Integer32, hwPhysicalPortInSlot Integer32, hwPhysicalPortInCard Integer32, hwPhysicalPortInPort Integer32, hwPhysicalAutoShutLaserEnable INTEGER, hwPhysicalAutoShutLaserOpenInterval Integer32, hwPhysicalAutoShutLaserCloseInterval Integer32, hwPhysicalAutoShutLaserLongOpenInterval Integer32, hwPhysicalLoopbackType INTEGER, hwPhysicalShutLaser INTEGER, hwPhysicalLaserStatus INTEGER, hwPhysicalPortHoldUp INTEGER, hwPhysicalPortAlarmInverseEnable INTEGER } -- 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.1 hwPhysicalPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index(es) of physical port(s) present on the device ." ::= { hwPhysicalPortEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.2 hwPhysicalPortDelayTime OBJECT-TYPE SYNTAX Unsigned32 (0..86400000) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the port tx enabling delay time. The units of hwPhysicalPortDelayTime is millisecond. The default value is 0 ms. " DEFVAL { 0 } ::= { hwPhysicalPortEntry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.3 hwPhysicalPortDelayRemainTime OBJECT-TYPE SYNTAX Unsigned32 (0..86400000) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the remnant time of enabling port-tx. The units of hwPhysicalPortDelayTime is millisecond." ::= { hwPhysicalPortEntry 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.4 hwPhysicalPortName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the physical port name." ::= { hwPhysicalPortEntry 4 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.5 hwPhysicalPortInChassis OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the physical port in chassis." ::= { hwPhysicalPortEntry 5 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.6 hwPhysicalPortInSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the SlotID." ::= { hwPhysicalPortEntry 6 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.7 hwPhysicalPortInCard OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the CardID." ::= { hwPhysicalPortEntry 7 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.8 hwPhysicalPortInPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the PortID." ::= { hwPhysicalPortEntry 8 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.9 hwPhysicalAutoShutLaserEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2), not-support(255) } MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates enable or disable the laser auto shut . Default is disable." ::= { hwPhysicalPortEntry 9 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.10 hwPhysicalAutoShutLaserOpenInterval OBJECT-TYPE SYNTAX Integer32 (100..300 | 2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the open interval of laser auto shut . The default value is 200 (unit: 10 ms). The value 2147483647 means that the interface doesn't support laser auto shut." ::= { hwPhysicalPortEntry 10 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.11 hwPhysicalAutoShutLaserCloseInterval OBJECT-TYPE SYNTAX Integer32 (200..30000 | 2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the close interval of laser auto shut . The default value is 6000 (unit: 10 ms). The value 2147483647 means that the interface doesn't support laser auto shut." ::= { hwPhysicalPortEntry 11 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.12 hwPhysicalAutoShutLaserLongOpenInterval OBJECT-TYPE SYNTAX Integer32 (200..30000 | 2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the long open interval of laser auto shut . The default value is 9000 (unit: 10 ms). The value 2147483647 means that the interface doesn't support laser auto shut." ::= { hwPhysicalPortEntry 12 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.13 hwPhysicalLoopbackType OBJECT-TYPE SYNTAX INTEGER { otherLoop(1), stopLoopback(2), local(3), remote(4) } MAX-ACCESS read-only STATUS current DESCRIPTION " The current state of loopbackType in port." ::= { hwPhysicalPortEntry 13 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.14 hwPhysicalShutLaser OBJECT-TYPE SYNTAX INTEGER { off(1), on(2), not-support(255) } MAX-ACCESS read-write STATUS current DESCRIPTION " Turn on or turn off the laser." ::= { hwPhysicalPortEntry 14 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.15 hwPhysicalLaserStatus OBJECT-TYPE SYNTAX INTEGER { off(1), on(2), offline(3), not-support(255) } MAX-ACCESS read-only STATUS current DESCRIPTION " The current status of the laser." ::= { hwPhysicalPortEntry 15 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.16 hwPhysicalPortHoldUp OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates enable or disable the interface to remain Up , the default value is disable." ::= { hwPhysicalPortEntry 16 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.17 hwPhysicalPortAlarmInverseEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Config port alarm inverse enable." ::= { hwPhysicalPortEntry 17 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.2 hwSDHRsMsPerfCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSDHRsMsPerfCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the performance stat of the Regenerator Section." ::= { hwPhysicalPort 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.2.1 hwSDHRsMsPerfCurrentEntry OBJECT-TYPE SYNTAX HwSDHRsMsPerfCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the performance stat of the Regenerator Section." INDEX { hwSDHRsMsPerfCurrentIfIndex, hwSDHRsMsPerfCurrentDataIndex } ::= { hwSDHRsMsPerfCurrentTable 1 } HwSDHRsMsPerfCurrentEntry ::= SEQUENCE { hwSDHRsMsPerfCurrentIfIndex InterfaceIndex, hwSDHRsMsPerfCurrentDataIndex Integer32, hwSDHRsPerfCurrentBBE Integer32, hwSDHRsPerfCurrentES Integer32, hwSDHRsPerfCurrentSES Integer32, hwSDHRsPerfCurrentUAS Integer32, hwSDHMsPerfCurrentBBE Integer32, hwSDHMsPerfCurrentES Integer32, hwSDHMsPerfCurrentSES Integer32, hwSDHMsPerfCurrentUAS Integer32, hwSDHMsPerfCurrentFEBBE Integer32, hwSDHMsPerfCurrentFEES Integer32, hwSDHMsPerfCurrentFESES Integer32, hwSDHMsPerfCurrentFEUAS Integer32 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.1 hwSDHRsMsPerfCurrentIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index(es) of port(s) present on the device ." ::= { hwSDHRsMsPerfCurrentEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.2 hwSDHRsMsPerfCurrentDataIndex OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Data index(es) of port(s) present on the device ." ::= { hwSDHRsMsPerfCurrentEntry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.3 hwSDHRsPerfCurrentBBE OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Regenerator Section Background Block Error." ::= { hwSDHRsMsPerfCurrentEntry 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.4 hwSDHRsPerfCurrentES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Regenerator Section Errored Second." ::= { hwSDHRsMsPerfCurrentEntry 4 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.5 hwSDHRsPerfCurrentSES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Regenerator Section Severely Errored Second." ::= { hwSDHRsMsPerfCurrentEntry 5 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.6 hwSDHRsPerfCurrentUAS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Regenerator section unavailable second." ::= { hwSDHRsMsPerfCurrentEntry 6 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.7 hwSDHMsPerfCurrentBBE OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Multiplex Section Background Block Error." ::= { hwSDHRsMsPerfCurrentEntry 7 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.8 hwSDHMsPerfCurrentES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Multiplex Section Errored Second." ::= { hwSDHRsMsPerfCurrentEntry 8 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.9 hwSDHMsPerfCurrentSES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Multiplex Section Severely Errored Second." ::= { hwSDHRsMsPerfCurrentEntry 9 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.10 hwSDHMsPerfCurrentUAS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Multiplex Section Unavaliable Seconds." ::= { hwSDHRsMsPerfCurrentEntry 10 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.11 hwSDHMsPerfCurrentFEBBE OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Multiplex Section Far end Background Block Error." ::= { hwSDHRsMsPerfCurrentEntry 11 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.12 hwSDHMsPerfCurrentFEES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Multiplex Section Far end Errored Second." ::= { hwSDHRsMsPerfCurrentEntry 12 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.13 hwSDHMsPerfCurrentFESES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Multiplex Section Far end Severely Errored Second." ::= { hwSDHRsMsPerfCurrentEntry 13 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.2.1.14 hwSDHMsPerfCurrentFEUAS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Multiplex Section Far end Unavaliable Seconds." ::= { hwSDHRsMsPerfCurrentEntry 14 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.3 hwSDHHpPerfCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSDHHpPerfCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the performance stat of the Higher order Path." ::= { hwPhysicalPort 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.3.1 hwSDHHpPerfCurrentEntry OBJECT-TYPE SYNTAX HwSDHHpPerfCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the performance stat of the Higher order Path." INDEX { hwSDHHpPerfCurrentIfIndex, hwSDHHpPerfCurrentHpIndex, hwSDHHpPerfCurrentDataIndex } ::= { hwSDHHpPerfCurrentTable 1 } HwSDHHpPerfCurrentEntry ::= SEQUENCE { hwSDHHpPerfCurrentIfIndex InterfaceIndex, hwSDHHpPerfCurrentHpIndex Integer32, hwSDHHpPerfCurrentDataIndex Integer32, hwSDHHpPerfCurrentBBE Integer32, hwSDHHpPerfCurrentES Integer32, hwSDHHpPerfCurrentSES Integer32, hwSDHHpPerfCurrentUAS Integer32, hwSDHHpPerfCurrentFEBBE Integer32, hwSDHHpPerfCurrentFEES Integer32, hwSDHHpPerfCurrentFESES Integer32, hwSDHHpPerfCurrentFEUAS Integer32 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.1 hwSDHHpPerfCurrentIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index(es) of port(s) present on the device ." ::= { hwSDHHpPerfCurrentEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.2 hwSDHHpPerfCurrentHpIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Higher order Path index(es) of port(s) present on the device ." ::= { hwSDHHpPerfCurrentEntry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.3 hwSDHHpPerfCurrentDataIndex OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Data index(es) of port(s) present on the device ." ::= { hwSDHHpPerfCurrentEntry 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.4 hwSDHHpPerfCurrentBBE OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Multiplex Section Far end Unavaliable Seconds." ::= { hwSDHHpPerfCurrentEntry 4 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.5 hwSDHHpPerfCurrentES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Higher order Path Errored Second." ::= { hwSDHHpPerfCurrentEntry 5 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.6 hwSDHHpPerfCurrentSES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Higher order Path Severely Errored Second." ::= { hwSDHHpPerfCurrentEntry 6 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.7 hwSDHHpPerfCurrentUAS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Higher order Path Unavaliable Seconds." ::= { hwSDHHpPerfCurrentEntry 7 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.8 hwSDHHpPerfCurrentFEBBE OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Higher order Path Far end Background Block Error." ::= { hwSDHHpPerfCurrentEntry 8 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.9 hwSDHHpPerfCurrentFEES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Higher order Path Far end Errored Second." ::= { hwSDHHpPerfCurrentEntry 9 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.10 hwSDHHpPerfCurrentFESES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Higher order Path Far end Severely Errored Second." ::= { hwSDHHpPerfCurrentEntry 10 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.3.1.11 hwSDHHpPerfCurrentFEUAS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Higher order Path Far end Unavaliable Seconds." ::= { hwSDHHpPerfCurrentEntry 11 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.4 hwSDHLpPerfCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSDHLpPerfCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the performance stat of the Low order Path." ::= { hwPhysicalPort 4 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.4.1 hwSDHLpPerfCurrentEntry OBJECT-TYPE SYNTAX HwSDHLpPerfCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the performance stat of the Low order Path." INDEX { hwSDHLpPerfCurrentIfIndex, hwSDHLpPerfCurrentHpIndex, hwSDHLpPerfCurrentLpIndex, hwSDHLpPerfCurrentDataIndex } ::= { hwSDHLpPerfCurrentTable 1 } HwSDHLpPerfCurrentEntry ::= SEQUENCE { hwSDHLpPerfCurrentIfIndex InterfaceIndex, hwSDHLpPerfCurrentHpIndex Integer32, hwSDHLpPerfCurrentLpIndex Integer32, hwSDHLpPerfCurrentDataIndex Integer32, hwSDHLpPerfCurrentBBE Integer32, hwSDHLpPerfCurrentES Integer32, hwSDHLpPerfCurrentSES Integer32, hwSDHLpPerfCurrentUAS Integer32, hwSDHLpPerfCurrentFEBBE Integer32, hwSDHLpPerfCurrentFEES Integer32, hwSDHLpPerfCurrentFESES Integer32, hwSDHLpPerfCurrentFEUAS Integer32 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.1 hwSDHLpPerfCurrentIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index(es) of port(s) present on the device ." ::= { hwSDHLpPerfCurrentEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.2 hwSDHLpPerfCurrentHpIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Higher order Path index(es) of port(s) present on the device ." ::= { hwSDHLpPerfCurrentEntry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.3 hwSDHLpPerfCurrentLpIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Low order Path index(es) of port(s) present on the device ." ::= { hwSDHLpPerfCurrentEntry 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.4 hwSDHLpPerfCurrentDataIndex OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Data index(es) of port(s) present on the device ." ::= { hwSDHLpPerfCurrentEntry 4 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.5 hwSDHLpPerfCurrentBBE OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Low order Path Background Block Error." ::= { hwSDHLpPerfCurrentEntry 5 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.6 hwSDHLpPerfCurrentES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Low order Path errored seconds." ::= { hwSDHLpPerfCurrentEntry 6 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.7 hwSDHLpPerfCurrentSES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Low order Path severely errored seconds." ::= { hwSDHLpPerfCurrentEntry 7 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.8 hwSDHLpPerfCurrentUAS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Low order Path Unavailable second." ::= { hwSDHLpPerfCurrentEntry 8 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.9 hwSDHLpPerfCurrentFEBBE OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Low order Path Far-end Background Block Error." ::= { hwSDHLpPerfCurrentEntry 9 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.10 hwSDHLpPerfCurrentFEES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Low order Path Far-end errored seconds." ::= { hwSDHLpPerfCurrentEntry 10 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.11 hwSDHLpPerfCurrentFESES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Low order Path Far-end severely errored seconds." ::= { hwSDHLpPerfCurrentEntry 11 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.4.1.12 hwSDHLpPerfCurrentFEUAS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Low order Path Far-end Unavailable second." ::= { hwSDHLpPerfCurrentEntry 12 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.5 hwPDHPerfCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPDHPerfCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the performance stat of the E1 line side." ::= { hwPhysicalPort 5 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.5.1 hwPDHPerfCurrentEntry OBJECT-TYPE SYNTAX HwPDHPerfCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the performance stat of the E1 line side." INDEX { hwPDHPerfCurrentIfIndex, hwPDHPerfCurrentDataIndex } ::= { hwPDHPerfCurrentTable 1 } HwPDHPerfCurrentEntry ::= SEQUENCE { hwPDHPerfCurrentIfIndex InterfaceIndex, hwPDHPerfCurrentDataIndex Integer32, hwPDHPerfCurrentBBE Integer32, hwPDHPerfCurrentES Integer32, hwPDHPerfCurrentSES Integer32, hwPDHPerfCurrentUAS Integer32 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.5.1.1 hwPDHPerfCurrentIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index(es) of port(s) present on the device." ::= { hwPDHPerfCurrentEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.5.1.2 hwPDHPerfCurrentDataIndex OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Data index(es) of port(s) present on the device." ::= { hwPDHPerfCurrentEntry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.5.1.3 hwPDHPerfCurrentBBE OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "E1 line side code violation count." ::= { hwPDHPerfCurrentEntry 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.5.1.4 hwPDHPerfCurrentES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "E1 line side code violation errored second." ::= { hwPDHPerfCurrentEntry 4 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.5.1.5 hwPDHPerfCurrentSES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "E1 line side code violation severely errored second." ::= { hwPDHPerfCurrentEntry 5 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.5.1.6 hwPDHPerfCurrentUAS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "E1 line side code violation loss-of-signal second." ::= { hwPDHPerfCurrentEntry 6 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.6 hwEthPortStatTable OBJECT-TYPE SYNTAX SEQUENCE OF HwEthPortStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the stat of the ethernet interface." ::= { hwPhysicalPort 6 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.6.1 hwEthPortStatEntry OBJECT-TYPE SYNTAX HwEthPortStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the stat of the ethernet interface." INDEX { hwEthPortStatIfIndex } ::= { hwEthPortStatTable 1 } HwEthPortStatEntry ::= SEQUENCE { hwEthPortStatIfIndex InterfaceIndex, hwEthPortStatBadBytes Counter64 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.6.1.1 hwEthPortStatIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index(es) of port(s) present on the device." ::= { hwEthPortStatEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.6.1.2 hwEthPortStatBadBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the stat of badbytes." ::= { hwEthPortStatEntry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.7 hwPhysicalPortGlobleCfg OBJECT IDENTIFIER ::= { hwPhysicalPort 7 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.7.1 hwLoopBackAutoClearEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "set loopback autoclear status enable(1) disable(2)." ::= { hwPhysicalPortGlobleCfg 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.7.2 hwLoopBackAutoClearPeriod OBJECT-TYPE SYNTAX Integer32 (1..2880) UNITS "minute" MAX-ACCESS read-write STATUS current DESCRIPTION "set loopback autoclear period, unit minute,value range<1-2880> default<5 minute>." ::= { hwPhysicalPortGlobleCfg 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.7.3 hwPortAlarmInverseEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Config globle alarm inverse enable." ::= { hwPhysicalPortGlobleCfg 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.9 hwDslGroup OBJECT IDENTIFIER ::= { hwPortMIBObjects 9 } -- 1.3.6.1.4.1.2011.5.25.157.1.9.1 hwDslGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDslGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the attributes of the dsl group." ::= { hwDslGroup 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.9.1.1 hwDslGroupEntry OBJECT-TYPE SYNTAX HwDslGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the dsl group table." INDEX { hwDslGroupIfIndex } ::= { hwDslGroupTable 1 } HwDslGroupEntry ::= SEQUENCE { hwDslGroupIfIndex InterfaceIndex, hwDslGroupWorkMode INTEGER, hwDslGroupBisState INTEGER, hwDslGroupEncapeMode INTEGER, hwDslGroupEnable INTEGER, hwDslGroupRowStatus RowStatus } -- 1.3.6.1.4.1.2011.5.25.157.1.9.1.1.1 hwDslGroupIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index(es) of dsl group present on the device." ::= { hwDslGroupEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.9.1.1.2 hwDslGroupWorkMode OBJECT-TYPE SYNTAX INTEGER { atm(1), efm(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The dsl group of SHD4 card can work in efm or atm mode. Default is efm. " ::= { hwDslGroupEntry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.9.1.1.3 hwDslGroupBisState OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2), notSupport(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Bis can be enabled or disabled in ATM mode of SHD4 card." ::= { hwDslGroupEntry 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.9.1.1.4 hwDslGroupEncapeMode OBJECT-TYPE SYNTAX INTEGER { eoaLlc(1), eoaVcmux(2), notSupport(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The dsl group of AVD8 card can work in ETHoA-LLC mode or ETHoA-VCMUX mode. Default is ETHoA-LLC." ::= { hwDslGroupEntry 4 } -- 1.3.6.1.4.1.2011.5.25.157.1.9.1.1.5 hwDslGroupEnable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2), notSupport(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Trigger the operation of binding dsl link(s) to the dsl group." ::= { hwDslGroupEntry 5 } -- 1.3.6.1.4.1.2011.5.25.157.1.9.1.1.60 hwDslGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "An object that allows entries in this table to be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this row, when this object is set to 'active' (1), MUST be rejected with an SNMP error (e.g., inconsistentValue). In order to perform a SET operation to any other attribute in this table the manager MUST set this object to notInService (2). After setting the object back to 'active' the implementation MAY tear down all the sessions that belong to this partition and recreate them, depending on what session attributes have been modified." ::= { hwDslGroupEntry 60 } -- 1.3.6.1.4.1.2011.5.25.157.1.9.2 hwDslGroupBoundVeTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDslGroupBoundVeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the attributes of the dsl group bound virtual-ethernet." ::= { hwDslGroup 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.9.2.1 hwDslGroupBoundVeEntry OBJECT-TYPE SYNTAX HwDslGroupBoundVeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the dsl group bound vitrual-ethernet table." INDEX { hwDslGroupIfIndexOfBound, hwDslGroupPvcId } ::= { hwDslGroupBoundVeTable 1 } HwDslGroupBoundVeEntry ::= SEQUENCE { hwDslGroupIfIndexOfBound InterfaceIndex, hwVirtualEthernetIfIndex InterfaceIndex, hwDslGroupVpi Integer32, hwDslGroupVci Integer32, hwDslGroupPvcId Integer32, hwBoundVeRowStatus RowStatus } -- 1.3.6.1.4.1.2011.5.25.157.1.9.2.1.1 hwDslGroupIfIndexOfBound OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index(es) of dsl group present on the device." ::= { hwDslGroupBoundVeEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.9.2.1.2 hwVirtualEthernetIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The first virtual ethernet interface which the dsl group is bound to." ::= { hwDslGroupBoundVeEntry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.9.2.1.3 hwDslGroupVpi OBJECT-TYPE SYNTAX Integer32 (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "VPI value of the 1st PVC pair." ::= { hwDslGroupBoundVeEntry 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.9.2.1.4 hwDslGroupVci OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "VCI value of the 1st PVC pair." ::= { hwDslGroupBoundVeEntry 4 } -- 1.3.6.1.4.1.2011.5.25.157.1.9.2.1.5 -- 1.3.6.1.4.1.2011.5.25.157.1.9.2.1.5 hwDslGroupPvcId OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Identifier for VPI/VCI Pair." ::= { hwDslGroupBoundVeEntry 5 } -- 1.3.6.1.4.1.2011.5.25.157.1.9.2.1.50 -- 1.3.6.1.4.1.2011.5.25.157.1.9.2.1.50 hwBoundVeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS obsolete DESCRIPTION "An object that allows entries in this table to be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this row, when this object is set to 'active' (1), MUST be rejected with an SNMP error (e.g., inconsistentValue). In order to perform a SET operation to any other attribute in this table the manager MUST set this object to notInService (2). After setting the object back to 'active' the implementation MAY tear down all the sessions that belong to this partition and recreate them, depending on what session attributes have been modified." ::= { hwDslGroupBoundVeEntry 50 } -- 1.3.6.1.4.1.2011.5.25.157.1.9.3 -- 1.3.6.1.4.1.2011.5.25.157.1.9.3 hwDslGroupBindVeTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDslGroupBindVeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the relation of the dsl group binding virtual-ethernet." ::= { hwDslGroup 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.9.3.1 -- 1.3.6.1.4.1.2011.5.25.157.1.9.3.1 hwDslGroupBindVeEntry OBJECT-TYPE SYNTAX HwDslGroupBindVeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the dsl group binding vitrual-ethernet table." INDEX { hwDslGroupInterfaceIndex, hwVirtualEthernetInterfaceIndex } ::= { hwDslGroupBindVeTable 1 } HwDslGroupBindVeEntry ::= SEQUENCE { hwDslGroupInterfaceIndex InterfaceIndex, hwVirtualEthernetInterfaceIndex InterfaceIndex, hwBindVeRowStatus RowStatus } -- 1.3.6.1.4.1.2011.5.25.157.1.9.3.1.1 -- 1.3.6.1.4.1.2011.5.25.157.1.9.3.1.1 hwDslGroupInterfaceIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index(es) of the dsl group present on the device." ::= { hwDslGroupBindVeEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.9.3.1.2 -- 1.3.6.1.4.1.2011.5.25.157.1.9.3.1.2 hwVirtualEthernetInterfaceIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The virtual ethernet interface index which the dsl group is bound to." ::= { hwDslGroupBindVeEntry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.9.3.1.50 -- 1.3.6.1.4.1.2011.5.25.157.1.9.3.1.50 hwBindVeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "An object that allows entries in this table to be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this row, when this object is set to 'active' (1), MUST be rejected with an SNMP error (e.g., inconsistentValue). In order to perform a SET operation to any other attribute in this table the manager MUST set this object to notInService (2). After setting the object back to 'active' the implementation MAY tear down all the sessions that belong to this partition and recreate them, depending on what session attributes have been modified." ::= { hwDslGroupBindVeEntry 50 } -- 1.3.6.1.4.1.2011.5.25.157.1.10 hwDslGroupIma OBJECT IDENTIFIER ::= { hwPortMIBObjects 10 } -- 1.3.6.1.4.1.2011.5.25.157.1.10.1 hwDslGroupImaTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDslGroupImaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the attributes of the dsl ima group." ::= { hwDslGroupIma 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.10.1.1 hwDslGroupImaEntry OBJECT-TYPE SYNTAX HwDslGroupImaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the dsl ima group table." INDEX { hwDslGroupImaIfIndex } ::= { hwDslGroupImaTable 1 } HwDslGroupImaEntry ::= SEQUENCE { hwDslGroupImaIfIndex InterfaceIndex, hwDslGroupImaVersion INTEGER, hwDslGroupImaFrameLen ImaFrameLength, hwDslGroupImaReset INTEGER, hwDslGroupImaTxMinLinkNum Integer32, hwDslGroupImaRxMinLinkNum Integer32, hwDslGroupImaNeState ImaGroupState, hwDslGroupImaFeState ImaGroupState, hwDslGroupImaTxCellRate Integer32, hwDslGroupImaRxCellRate Integer32, hwDslGroupImaTxActLinkNum Integer32, hwDslGroupImaRxActLinkNum Integer32, hwDslGroupImaIfName OCTET STRING } -- 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.1 hwDslGroupImaIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index(es) of dsl group present on the device." ::= { hwDslGroupImaEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.2 hwDslGroupImaVersion OBJECT-TYPE SYNTAX INTEGER { v0(1), v1(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Version of the ima group of SHD4I card. v0: ima protocol version 1.0; v1: ima protocol version 1.1. " ::= { hwDslGroupImaEntry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.3 hwDslGroupImaFrameLen OBJECT-TYPE SYNTAX ImaFrameLength MAX-ACCESS read-write STATUS current DESCRIPTION "Frame length of the ima group of SHD4I card. If ima protocol version is 1.0, the frame length is only 128." ::= { hwDslGroupImaEntry 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.4 hwDslGroupImaReset OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ima group reset for SHD4I card." ::= { hwDslGroupImaEntry 4 } -- 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.5 hwDslGroupImaTxMinLinkNum OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum active links number by TX direction." ::= { hwDslGroupImaEntry 5 } -- 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.6 hwDslGroupImaRxMinLinkNum OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum active links number by RX direction. " ::= { hwDslGroupImaEntry 6 } -- 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.7 hwDslGroupImaNeState OBJECT-TYPE SYNTAX ImaGroupState MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the near-end ima group." ::= { hwDslGroupImaEntry 7 } -- 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.8 hwDslGroupImaFeState OBJECT-TYPE SYNTAX ImaGroupState MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the far-end ima group." ::= { hwDslGroupImaEntry 8 } -- 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.9 hwDslGroupImaTxCellRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current cell rate of ima group by TX direction." ::= { hwDslGroupImaEntry 9 } -- 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.10 hwDslGroupImaRxCellRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current cell rate of ima group by RX direction." ::= { hwDslGroupImaEntry 10 } -- 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.11 hwDslGroupImaTxActLinkNum OBJECT-TYPE SYNTAX Integer32 (0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active links by TX direction." ::= { hwDslGroupImaEntry 11 } -- 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.12 hwDslGroupImaRxActLinkNum OBJECT-TYPE SYNTAX Integer32 (0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active links by RX direction." ::= { hwDslGroupImaEntry 12 } -- 1.3.6.1.4.1.2011.5.25.157.1.10.1.1.13 hwDslGroupImaIfName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The interface name of ima group." ::= { hwDslGroupImaEntry 13 } -- 1.3.6.1.4.1.2011.5.25.157.1.11 hwDslLink OBJECT IDENTIFIER ::= { hwPortMIBObjects 11 } -- 1.3.6.1.4.1.2011.5.25.157.1.11.1 hwDslLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDslLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the dsl link bound relation." ::= { hwDslLink 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.11.1.1 hwDslLinkEntry OBJECT-TYPE SYNTAX HwDslLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the dsl link bound relation." INDEX { hwBoundDslGroupIfIndex, hwDslLinkIfIndex } ::= { hwDslLinkTable 1 } HwDslLinkEntry ::= SEQUENCE { hwBoundDslGroupIfIndex InterfaceIndex, hwDslLinkIfIndex InterfaceIndex, hwDslLinkIfName OCTET STRING, hwBoundDslGroupIfName OCTET STRING, hwDslLinkBoundRowStatus RowStatus } -- 1.3.6.1.4.1.2011.5.25.157.1.11.1.1.1 hwBoundDslGroupIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index of dsl group which the dsl link bound to." ::= { hwDslLinkEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.11.1.1.2 hwDslLinkIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Interface index of the dsl link device." ::= { hwDslLinkEntry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.11.1.1.4 hwDslLinkIfName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The interface name of the dsl link." ::= { hwDslLinkEntry 4 } -- 1.3.6.1.4.1.2011.5.25.157.1.11.1.1.5 hwBoundDslGroupIfName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index of dsl group which the dsl link bound to." ::= { hwDslLinkEntry 5 } -- 1.3.6.1.4.1.2011.5.25.157.1.11.1.1.50 hwDslLinkBoundRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "An object that allows entries in this table to be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this row, when this object is set to 'active' (1), MUST be rejected with an SNMP error (e.g., inconsistentValue). In order to perform a SET operation to any other attribute in this table the manager MUST set this object to notInService (2). After setting the object back to 'active' the implementation MAY tear down all the sessions that belong to this partition and recreate them, depending on what session attributes have been modified." ::= { hwDslLinkEntry 50 } -- 1.3.6.1.4.1.2011.5.25.157.1.12 hwPWAlarm OBJECT IDENTIFIER ::= { hwPortMIBObjects 12 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.1 hwPWAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPWAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the attributes of the PW alarm." ::= { hwPWAlarm 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.1.1 hwPWAlarmEntry OBJECT-TYPE SYNTAX HwPWAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the PW alarm relation." INDEX { hwPWAlarmIfIndex } ::= { hwPWAlarmTable 1 } HwPWAlarmEntry ::= SEQUENCE { hwPWAlarmIfIndex InterfaceIndex, hwPWCesVcID Integer32, hwPWCesVcType Integer32, hwPeerIpAddr IpAddress, hwAlarmStatus Integer32, hwPWAlarmRMLEnableStatus EnabledStatus, hwLosAlarmTriggerThreshold Integer32, hwLosAlarmResumeThreshold Integer32, hwPWPortName OCTET STRING, hwLosPktExcTriggerThreshold Integer32, hwLosPktExcResumeThreshold Integer32, hwMisorderPktExcTriggerThreshold Integer32, hwMisorderPktExcResumeThreshold Integer32, hwStrayPktExcTriggerThreshold Integer32, hwStrayPktExcResumeThreshold Integer32, hwMalPktExcTriggerThreshold Integer32, hwMalPktExcResumeThreshold Integer32, hwJtrUdrExcTriggerThreshold Integer32, hwJtrUdrExcResumeThreshold Integer32, hwJtrOvrExcTriggerThreshold Integer32, hwJtrOvrExcResumeThreshold Integer32 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.1 hwPWAlarmIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index of PW alarm group." ::= { hwPWAlarmEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.2 hwPWCesVcID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Vc ID of PW alarm group." ::= { hwPWAlarmEntry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.3 hwPWCesVcType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Vc Type of PW alarm group." ::= { hwPWAlarmEntry 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.4 hwPeerIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Peer IP Address of PW alarm group." ::= { hwPWAlarmEntry 4 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.5 hwAlarmStatus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Alarm status of PW alarm group." ::= { hwPWAlarmEntry 5 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.6 hwPWAlarmRMLEnableStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "PW control word RML of PW alarm group." ::= { hwPWAlarmEntry 6 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.7 hwLosAlarmTriggerThreshold OBJECT-TYPE SYNTAX Integer32 (2..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Trigger Threshold of continuous loss packets of PW alarm group." DEFVAL { 100 } ::= { hwPWAlarmEntry 7 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.8 hwLosAlarmResumeThreshold OBJECT-TYPE SYNTAX Integer32 (32..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Resume Threshold of continuous loss packets of PW alarm group." DEFVAL { 5 } ::= { hwPWAlarmEntry 8 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.9 hwPWPortName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "PW port name of PW alarm group." ::= { hwPWAlarmEntry 9 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.10 hwLosPktExcTriggerThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Trigger threshold of lost packets of PW alarm group." ::= { hwPWAlarmEntry 10 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.11 hwLosPktExcResumeThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Resume threshold of lost packets of PW alarm group." ::= { hwPWAlarmEntry 11 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.12 hwMisorderPktExcTriggerThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Trigger threshold of packets lost due to the out-of-order condition of PW alarm group." ::= { hwPWAlarmEntry 12 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.13 hwMisorderPktExcResumeThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Resume threshold of packets lost due to the out-of-order condition of PW alarm group." ::= { hwPWAlarmEntry 13 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.14 hwStrayPktExcTriggerThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Trigger threshold of misconnected packets of PW alarm group." ::= { hwPWAlarmEntry 14 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.15 hwStrayPktExcResumeThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Resume threshold of misconnected packets of PW alarm group." ::= { hwPWAlarmEntry 15 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.16 hwMalPktExcTriggerThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Trigger threshold of malformed packets of PW alarm group." ::= { hwPWAlarmEntry 16 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.17 hwMalPktExcResumeThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Resume threshold of malformed packets of PW alarm group." ::= { hwPWAlarmEntry 17 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.18 hwJtrUdrExcTriggerThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Trigger threshold of jitter buffer underflows of PW alarm group." ::= { hwPWAlarmEntry 18 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.19 hwJtrUdrExcResumeThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Resume threshold of jitter buffer underflows of PW alarm group." ::= { hwPWAlarmEntry 19 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.20 hwJtrOvrExcTriggerThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Trigger threshold of jitter buffer overflows of PW alarm group." ::= { hwPWAlarmEntry 20 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.1.1.21 hwJtrOvrExcResumeThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Resume threshold of jitter buffer overflows of PW alarm group." ::= { hwPWAlarmEntry 21 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.2 hwAtmPWAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmPWAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the attributes of the ATM PW alarm." ::= { hwPWAlarm 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.2.1 hwAtmPWAlarmEntry OBJECT-TYPE SYNTAX HwAtmPWAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the ATM PW alarm relation." INDEX { hwAtmPWAlarmIfIndex } ::= { hwAtmPWAlarmTable 1 } HwAtmPWAlarmEntry ::= SEQUENCE { hwAtmPWAlarmIfIndex InterfaceIndex, hwAtmVcID Integer32, hwAtmVcType Integer32, hwAtmPeerIpAddr IpAddress, hwAtmPWPortName OCTET STRING, hwAtmLosPktExcTriggerThreshold Integer32, hwAtmLosPktExcResumeThreshold Integer32, hwAtmMisorderPktExcTriggerThreshold Integer32, hwAtmMisorderPktExcResumeThreshold Integer32, hwAtmUnknownCellExcTriggerThreshold Integer32, hwAtmUnknownCellExcResumeThreshold Integer32 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.1 hwAtmPWAlarmIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index of ATM PW alarm group." ::= { hwAtmPWAlarmEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.2 hwAtmVcID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Vc ID of ATM PW alarm group." ::= { hwAtmPWAlarmEntry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.3 hwAtmVcType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Vc Type of ATM PW alarm group." ::= { hwAtmPWAlarmEntry 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.4 hwAtmPeerIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Peer IP Address of ATM PW alarm group." ::= { hwAtmPWAlarmEntry 4 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.5 hwAtmPWPortName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "ATM PW port name of PW alarm group." ::= { hwAtmPWAlarmEntry 5 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.6 hwAtmLosPktExcTriggerThreshold OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Trigger threshold of lost packets of ATM PW alarm group." DEFVAL { 100 } ::= { hwAtmPWAlarmEntry 6 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.7 hwAtmLosPktExcResumeThreshold OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Resume threshold of lost packets of ATM PW alarm group." DEFVAL { 1 } ::= { hwAtmPWAlarmEntry 7 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.8 hwAtmMisorderPktExcTriggerThreshold OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Trigger threshold of packets lost due to the out-of-order condition of ATM PW alarm group." DEFVAL { 100 } ::= { hwAtmPWAlarmEntry 8 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.9 hwAtmMisorderPktExcResumeThreshold OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Resume threshold of packets lost due to the out-of-order condition of ATM PW alarm group." DEFVAL { 1 } ::= { hwAtmPWAlarmEntry 9 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.10 hwAtmUnknownCellExcTriggerThreshold OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Trigger threshold of unknown cell of ATM PW alarm group." DEFVAL { 100 } ::= { hwAtmPWAlarmEntry 10 } -- 1.3.6.1.4.1.2011.5.25.157.1.12.2.1.11 hwAtmUnknownCellExcResumeThreshold OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Resume threshold of unknown cell of ATM PW alarm group." DEFVAL { 1 } ::= { hwAtmPWAlarmEntry 11 } -- 1.3.6.1.4.1.2011.5.25.157.1.13 hwSNMPTrapEn OBJECT IDENTIFIER ::= { hwPortMIBObjects 13 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1 hwSNMPTrapEnTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSNMPTrapEnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEn 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1 hwSNMPTrapEnEntry OBJECT-TYPE SYNTAX HwSNMPTrapEnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." INDEX { hwSNMPTrapEnIfIndex } ::= { hwSNMPTrapEnTable 1 } HwSNMPTrapEnEntry ::= SEQUENCE { hwSNMPTrapEnIfIndex InterfaceIndex, hwCesPWLopsEn Integer32, hwCesPWRemoteLosPktEn Integer32, hwCesPWOppositeRAIEn Integer32, hwCesPWOppositeAcfaultEn Integer32, hwCesPWLosPktEn Integer32, hwCesPWMisorderPktEn Integer32, hwCesPWStrayPktEn Integer32, hwCesPWMalPktEn Integer32, hwCesPWJtrUnrEn Integer32, hwCesPWJtrOvrEn Integer32, hwCesPWAllEn Integer32, hwPhysicalPortLosAlarmEn Integer32, hwPhysicalPortLofAlarmEn Integer32, hwRsOofAlarmEn Integer32, hwRsB1ExcAlarmEn Integer32, hwRsB1SdAlarmEn Integer32, hwRsJ0TimAlarmEn Integer32, hwMsRdiAlarmEn Integer32, hwMsB2ExcAlarmEn Integer32, hwMsAuLopAlarmEn Integer32, hwMsAisAlarmEn Integer32, hwMsB2SdAlarmEn Integer32, hwHpJ1TimAlarmEn Integer32, hwHpUneqAlarmEn Integer32, hwHpRdiAlarmEn Integer32, hwHpB3ExcAlarmEn Integer32, hwHpPlmAlarmEn Integer32, hwHpB3SdAlarmEn Integer32, hwHpAuAisAlarmEn Integer32, hwLpTuLopAlarmEn Integer32, hwHpTuLomAlarmEn Integer32, hwLpTimAlarmEn Integer32, hwLpUneqAlarmEn Integer32, hwLpRdiAlarmEn Integer32, hwLpBipExcAlarmEn Integer32, hwLpBipSdAlarmEn Integer32, hwLpPlmAlarmEn Integer32, hwLpTuAisAlarmEn Integer32, hwDs1EsExcAlarmEn Integer32, hwDs1RmfaAlarmEn Integer32, hwDs1LmfaAlarmEn Integer32, hwDs1AisAlarmEn Integer32, hwDs1RdiAlarmEn Integer32, hwRsLocAlarmEn Integer32, hwLpRfiAlarmEn Integer32, hwLpV5VcaisAlarmEn Integer32, hwVc12oofAlarmEn Integer32, hwVc12AlmE1RaiAlarmEn Integer32, hwVc12LfaAlarmEn Integer32, hwVc12UpE1AisAlarmEn Integer32, hwVc12DownE1AisAlarmEn Integer32, hwDs1DownE1AisAlarmEn Integer32, hwMsLpsUniBiMAlarmEn Integer32, hwMsK1K2MAlarmEn Integer32, hwMsK2MAlarmEn Integer32, hwVc12LmfaAlarmEn Integer32, hwSDHAllEn Integer32, hwLaserShutAlarmEn Integer32, hwLaserAutoShutAlarmEn Integer32, hwLaserAllEn Integer32, hwLoopbackAlarmEn Integer32, hwChannelLoopbackAlarmEn Integer32, hwLoopbackAllEn Integer32, hwAtmOcdAlarmEn Integer32, hwAtmLcdAlarmEn Integer32, hwAtmUhcsAlarmEn Integer32, hwAtmChcsAlarmEn Integer32, hwAtmPWLosPktEn Integer32, hwAtmPWMisorderPktEn Integer32, hwAtmPWUnknownCellEn Integer32, hwAtmAllEn Integer32 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.1 hwSNMPTrapEnIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.2 hwCesPWLopsEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.3 hwCesPWRemoteLosPktEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.4 hwCesPWOppositeRAIEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 4 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.5 hwCesPWOppositeAcfaultEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 5 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.6 hwCesPWLosPktEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 6 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.7 hwCesPWMisorderPktEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 7 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.8 hwCesPWStrayPktEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 8 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.9 hwCesPWMalPktEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 9 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.10 hwCesPWJtrUnrEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 10 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.11 hwCesPWJtrOvrEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 11 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.12 hwCesPWAllEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 12 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.13 hwPhysicalPortLosAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 13 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.14 hwPhysicalPortLofAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 14 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.15 hwRsOofAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 15 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.16 hwRsB1ExcAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 16 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.17 hwRsB1SdAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 17 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.18 hwRsJ0TimAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 18 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.19 hwMsRdiAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 19 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.20 hwMsB2ExcAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 20 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.21 hwMsAuLopAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 21 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.22 hwMsAisAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 22 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.23 hwMsB2SdAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 23 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.24 hwHpJ1TimAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 24 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.25 hwHpUneqAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 25 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.26 hwHpRdiAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 26 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.27 hwHpB3ExcAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 27 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.28 hwHpPlmAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 28 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.29 hwHpB3SdAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 29 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.30 hwHpAuAisAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 30 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.31 hwLpTuLopAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 31 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.32 hwHpTuLomAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 32 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.33 hwLpTimAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 33 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.34 hwLpUneqAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 34 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.35 hwLpRdiAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 35 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.36 hwLpBipExcAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 36 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.37 hwLpBipSdAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 37 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.38 hwLpPlmAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 38 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.39 hwLpTuAisAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 39 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.40 hwDs1EsExcAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 40 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.41 hwDs1RmfaAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 41 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.42 hwDs1LmfaAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 42 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.43 hwDs1AisAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 43 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.44 hwDs1RdiAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 44 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.45 hwRsLocAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 45 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.46 hwLpRfiAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 46 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.47 hwLpV5VcaisAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 47 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.48 hwVc12oofAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 48 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.49 hwVc12AlmE1RaiAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 49 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.50 hwVc12LfaAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 50 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.51 hwVc12UpE1AisAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 51 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.52 hwVc12DownE1AisAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 52 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.53 hwDs1DownE1AisAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 53 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.54 hwMsLpsUniBiMAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 54 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.55 hwMsK1K2MAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 55 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.56 hwMsK2MAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 56 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.57 hwVc12LmfaAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 57 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.58 hwSDHAllEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 58 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.59 hwLaserShutAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 59 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.60 hwLaserAutoShutAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 60 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.61 hwLaserAllEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 61 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.62 hwLoopbackAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 62 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.63 hwChannelLoopbackAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 63 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.64 hwLoopbackAllEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 64 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.65 hwAtmOcdAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 65 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.66 hwAtmLcdAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 66 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.67 hwAtmUhcsAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 67 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.68 hwAtmChcsAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 68 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.69 hwAtmPWLosPktEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 69 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.70 hwAtmPWMisorderPktEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 70 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.71 hwAtmPWUnknownCellEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 71 } -- 1.3.6.1.4.1.2011.5.25.157.1.13.1.1.72 hwAtmAllEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 72 } -- 1.3.6.1.4.1.2011.5.25.157.1.14 hwPortAlarmThreshold OBJECT IDENTIFIER ::= { hwPortMIBObjects 14 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1 hwPortAlarmThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPortAlarmThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the port alarm threshold. This table lists the port alarm threshold of various interfaces." ::= { hwPortAlarmThreshold 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1 hwPortAlarmThresholdEntry OBJECT-TYPE SYNTAX HwPortAlarmThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the port alarm threshold. This table lists the threshold of various port alarm." INDEX { hwPhysicalPortThrIfIndex } ::= { hwPortAlarmThresholdTable 1 } HwPortAlarmThresholdEntry ::= SEQUENCE{ hwPhysicalPortThrIfIndex InterfaceIndex, hwPhysicalPortThrName OCTET STRING, hwPhysicalPortCrcErrorStatistics Counter64, hwPhysicalPortCrcErrorHighThreshold Unsigned32, hwPhysicalPortCrcErrorLowThreshold Unsigned32, hwPhysicalPortCrcErrorInterval Unsigned32, hwPhysicalPortSymbolErrorStatistics Counter64, hwPhysicalPortSymbolErrorHighThreshold Unsigned32, hwPhysicalPortSymbolErrorLowThreshold Unsigned32, hwPhysicalPortSymbolErrorInterval Unsigned32, hwPhysicalPortInputErrorStatistics Counter64, hwPhysicalPortInputErrorHighThreshold Unsigned32, hwPhysicalPortInputErrorLowThreshold Unsigned32, hwPhysicalPortInputErrorInterval Unsigned32, hwPhysicalPortOutputErrorStatistics Counter64, hwPhysicalPortOutputErrorHighThreshold Unsigned32, hwPhysicalPortOutputErrorLowThreshold Unsigned32, hwPhysicalPortOutputErrorInterval Unsigned32, hwPhysicalPortSdhErrorStatistics Counter64, hwPhysicalPortSdhErrorHighThreshold Unsigned32, hwPhysicalPortSdhErrorLowThreshold Unsigned32, hwPhysicalPortSdhErrorInterval Unsigned32, hwPhysicalPortBIP8SDErrorThreshold Unsigned32, hwPhysicalPortCrcPerAlarmThresholdCoefficient Unsigned32, hwPhysicalPortCrcPerAlarmThresholdPower Unsigned32, hwPhysicalPortCrcPerResumeThresholdCoefficient Unsigned32, hwPhysicalPortCrcPerResumeThresholdPower Unsigned32, hwPhysicalPortCrcPerTriggerLsp Unsigned32, hwPhysicalPortCrcPerCurrentValueString OCTET STRING, hwPhysicalPortCrcPerAlarmThresholdString OCTET STRING, hwPhysicalPortCrcPerResumeThresholdString OCTET STRING } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.1 hwPhysicalPortThrIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index(es) of physical port(s) present on the device." ::= { hwPortAlarmThresholdEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.2 hwPhysicalPortThrName OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name of physical port(s) present on the device." ::= { hwPortAlarmThresholdEntry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.3 hwPhysicalPortCrcErrorStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Crc error statistics value." ::= { hwPortAlarmThresholdEntry 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.4 hwPhysicalPortCrcErrorHighThreshold OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Crc error alarm high threshold,default value is 3." ::= { hwPortAlarmThresholdEntry 4 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.5 hwPhysicalPortCrcErrorLowThreshold OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Crc error alarm low threshold,default value is 3." ::= { hwPortAlarmThresholdEntry 5 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.6 hwPhysicalPortCrcErrorInterval OBJECT-TYPE SYNTAX Unsigned32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Crc error alarm interval time(unit is second),default value is 10s." ::= { hwPortAlarmThresholdEntry 6 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.7 hwPhysicalPortSymbolErrorStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Symbol error statistics value." ::= { hwPortAlarmThresholdEntry 7 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.8 hwPhysicalPortSymbolErrorHighThreshold OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Symbol error alarm high threshold,default value is 3." ::= { hwPortAlarmThresholdEntry 8 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.9 hwPhysicalPortSymbolErrorLowThreshold OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Symbol error alarm low threshold,default value is 3." ::= { hwPortAlarmThresholdEntry 9 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.10 hwPhysicalPortSymbolErrorInterval OBJECT-TYPE SYNTAX Unsigned32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Symbol error alarm interval time(unit is second),default value is 10s." ::= { hwPortAlarmThresholdEntry 10 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.11 hwPhysicalPortInputErrorStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Input error statistics value." ::= { hwPortAlarmThresholdEntry 11 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.12 hwPhysicalPortInputErrorHighThreshold OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Input error alarm high threshold,default value is 3." ::= { hwPortAlarmThresholdEntry 12 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.13 hwPhysicalPortInputErrorLowThreshold OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Input error alarm low threshold,default value is 3." ::= { hwPortAlarmThresholdEntry 13 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.14 hwPhysicalPortInputErrorInterval OBJECT-TYPE SYNTAX Unsigned32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Input error alarm interval time(unit is second),default value is 10s." ::= { hwPortAlarmThresholdEntry 14 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.15 hwPhysicalPortOutputErrorStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Output error statistics value." ::= { hwPortAlarmThresholdEntry 15 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.16 hwPhysicalPortOutputErrorHighThreshold OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Output error alarm high threshold,default value is 3." ::= { hwPortAlarmThresholdEntry 16 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.17 hwPhysicalPortOutputErrorLowThreshold OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Output error alarm low threshold,default value is 3." ::= { hwPortAlarmThresholdEntry 17 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.18 hwPhysicalPortOutputErrorInterval OBJECT-TYPE SYNTAX Unsigned32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Output error alarm interval time(unit is second),default value is 10s." ::= { hwPortAlarmThresholdEntry 18 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.19 hwPhysicalPortSdhErrorStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Sdh error statistics value." ::= { hwPortAlarmThresholdEntry 19 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.20 hwPhysicalPortSdhErrorHighThreshold OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Sdh error alarm high threshold,default value is 3." ::= { hwPortAlarmThresholdEntry 20 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.21 hwPhysicalPortSdhErrorLowThreshold OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Sdh error alarm low threshold,default value is 3." ::= { hwPortAlarmThresholdEntry 21 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.22 hwPhysicalPortSdhErrorInterval OBJECT-TYPE SYNTAX Unsigned32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Sdh error alarm interval time(unit is second),default value is 10s." ::= { hwPortAlarmThresholdEntry 22 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.23 hwPhysicalPortBIP8SDErrorThreshold OBJECT-TYPE SYNTAX Unsigned32(6..9) MAX-ACCESS read-write STATUS current DESCRIPTION "BIP8-SD error alarm threshold,default value is 6." ::= { hwPortAlarmThresholdEntry 23 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.24 hwPhysicalPortCrcPerAlarmThresholdCoefficient OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The coefficient value of CRC-PER(Packet Error Ratio) alarm threshold. The range is 1 to 9." ::= { hwPortAlarmThresholdEntry 24 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.25 hwPhysicalPortCrcPerAlarmThresholdPower OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The power value of CRC-PER(Packet Error Ratio) alarm threshold. The range is 1 to 5." ::= { hwPortAlarmThresholdEntry 25 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.26 hwPhysicalPortCrcPerResumeThresholdCoefficient OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The coefficient value of CRC-PER(Packet Error Ratio) resume threshold. The range is 1 to 9." ::= { hwPortAlarmThresholdEntry 26 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.27 hwPhysicalPortCrcPerResumeThresholdPower OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The power value of CRC-PER(Packet Error Ratio) resume threshold. The range is 1 to 6." ::= { hwPortAlarmThresholdEntry 27 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.28 hwPhysicalPortCrcPerTriggerLsp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Enalbe or disable the CRC-PER(Packet Error Ratio) result in lsp switchover. The range is 0 to 1." ::= { hwPortAlarmThresholdEntry 28 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.29 hwPhysicalPortCrcPerCurrentValueString OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The current value of CRC-PER(Packet Error Ratio)." ::= { hwPortAlarmThresholdEntry 29 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.30 hwPhysicalPortCrcPerAlarmThresholdString OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The alarm threshold of CRC-PER(Packet Error Ratio)." ::= { hwPortAlarmThresholdEntry 30 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.31 hwPhysicalPortCrcPerResumeThresholdString OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The resume threshold of CRC-PER(Packet Error Ratio)." ::= { hwPortAlarmThresholdEntry 31 } -- 1.3.6.1.4.1.2011.5.25.157.1.15 hwPortAlarmDownEnable OBJECT IDENTIFIER ::= { hwPortMIBObjects 15 } -- 1.3.6.1.4.1.2011.5.25.157.1.15.1 hwPortAlarmDownEnableTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPortAlarmDownEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Enalbe or disable the port alarm result in physics down. This table lists the enable status of various port alarm." ::= { hwPortAlarmDownEnable 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.15.1.1 hwPortAlarmDownEnableEntry OBJECT-TYPE SYNTAX HwPortAlarmDownEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Enalbe or disable the port alarm result in physics down. This table lists the enable status of various port alarm." INDEX { hwPhysicalPortDownIfIndex } ::= { hwPortAlarmDownEnableTable 1 } HwPortAlarmDownEnableEntry ::= SEQUENCE{ hwPhysicalPortDownIfIndex InterfaceIndex, hwPhysicalPortDownName OCTET STRING, hwPhysicalPortCrcEnabledDown INTEGER, hwPhysicalPortSymbolEnabledDown INTEGER, hwPhysicalPortInputEnabledDown INTEGER, hwPhysicalPortOutputEnabledDown INTEGER, hwPhysicalPortSdhEnabledDown INTEGER, hwPhysicalPortBip8SdEnabledDown INTEGER } -- 1.3.6.1.4.1.2011.5.25.157.1.15.1.1.1 hwPhysicalPortDownIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index(es) of physical port(s) present on the device." ::= { hwPortAlarmDownEnableEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.15.1.1.2 hwPhysicalPortDownName OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name of physical port(s) present on the device." ::= { hwPortAlarmDownEnableEntry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.15.1.1.3 hwPhysicalPortCrcEnabledDown OBJECT-TYPE SYNTAX INTEGER{ disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enalbe or disable the crc error alarm result in physics down, and the default value is disable." ::= { hwPortAlarmDownEnableEntry 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.15.1.1.4 hwPhysicalPortSymbolEnabledDown OBJECT-TYPE SYNTAX INTEGER{ disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enalbe or disable the symbol error alarm result in physics down, and the default value is disable." ::= { hwPortAlarmDownEnableEntry 4 } -- 1.3.6.1.4.1.2011.5.25.157.1.15.1.1.5 hwPhysicalPortInputEnabledDown OBJECT-TYPE SYNTAX INTEGER{ disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enalbe or disable the input error alarm result in physics down, and the default value is disable." ::= { hwPortAlarmDownEnableEntry 5 } -- 1.3.6.1.4.1.2011.5.25.157.1.15.1.1.6 hwPhysicalPortOutputEnabledDown OBJECT-TYPE SYNTAX INTEGER{ disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enalbe or disable the output error alarm result in physics down, and the default value is disable." ::= { hwPortAlarmDownEnableEntry 6 } -- 1.3.6.1.4.1.2011.5.25.157.1.15.1.1.7 hwPhysicalPortSdhEnabledDown OBJECT-TYPE SYNTAX INTEGER{ disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enalbe or disable the sdh error alarm result in physics down, and the default value is disable." ::= { hwPortAlarmDownEnableEntry 7 } -- 1.3.6.1.4.1.2011.5.25.157.1.15.1.1.8 hwPhysicalPortBip8SdEnabledDown OBJECT-TYPE SYNTAX INTEGER{ disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enalbe or disable the BIP8-SD error alarm result in physics down, and the default value is disable." ::= { hwPortAlarmDownEnableEntry 8 } -- 1.3.6.1.4.1.2011.5.25.157.2 hwPortNotifications OBJECT IDENTIFIER ::= { hwPortMIB 2 } -- 1.3.6.1.4.1.2011.5.25.157.2.1 hwPortACRMasterPWChange NOTIFICATION-TYPE OBJECTS { hwDs0ChannelBundleParentIfIndex, hwDs0ChannelBundleDs1ChannelId, hwDs0ChannelBundleId, hwDs0ChannelBundlePortName, hwDs0ChannelBundleIsMasterPW, hwDs0ChannelBundleMasterPWStatus } STATUS current DESCRIPTION "CES-ACR master PW change notification,indicates master pw change or master pw status change,this may happen when a pw is deleted or the pw status change." ::= { hwPortNotifications 1 } -- 1.3.6.1.4.1.2011.5.25.157.2.2 hwDslImaGroupTraps OBJECT IDENTIFIER ::= { hwPortNotifications 2 } -- 1.3.6.1.4.1.2011.5.25.157.2.2.1 hwDslImaGroupLEDown NOTIFICATION-TYPE OBJECTS { hwDslGroupImaIfIndex, hwDslGroupImaIfName } STATUS current DESCRIPTION "The ima group local edge down notification." ::= { hwDslImaGroupTraps 1 } -- 1.3.6.1.4.1.2011.5.25.157.2.2.2 hwDslImaGroupLEUp NOTIFICATION-TYPE OBJECTS { hwDslGroupImaIfIndex, hwDslGroupImaIfName } STATUS current DESCRIPTION "The ima group local edge up notification." ::= { hwDslImaGroupTraps 2 } -- 1.3.6.1.4.1.2011.5.25.157.2.2.3 hwDslImaGroupREDown NOTIFICATION-TYPE OBJECTS { hwDslGroupImaIfIndex, hwDslGroupImaIfName } STATUS current DESCRIPTION "The ima group remote edge down notification." ::= { hwDslImaGroupTraps 3 } -- 1.3.6.1.4.1.2011.5.25.157.2.2.4 hwDslImaGroupREUp NOTIFICATION-TYPE OBJECTS { hwDslGroupImaIfIndex, hwDslGroupImaIfName } STATUS current DESCRIPTION "The ima group remote edge up notification." ::= { hwDslImaGroupTraps 4 } -- 1.3.6.1.4.1.2011.5.25.157.2.3 hwDslImaLinkTraps OBJECT IDENTIFIER ::= { hwPortNotifications 3 } -- 1.3.6.1.4.1.2011.5.25.157.2.3.1 hwDslImaLinkLif NOTIFICATION-TYPE OBJECTS { hwDslGroupImaIfIndex, hwDslLinkIfIndex, hwDslGroupImaIfName, hwDslLinkIfName } STATUS current DESCRIPTION "The ima link lif notification." ::= { hwDslImaLinkTraps 1 } -- 1.3.6.1.4.1.2011.5.25.157.2.3.2 hwDslImaLinkLifResume NOTIFICATION-TYPE OBJECTS { hwDslGroupImaIfIndex, hwDslLinkIfIndex, hwDslGroupImaIfName, hwDslLinkIfName } STATUS current DESCRIPTION "The ima link lif resume notification." ::= { hwDslImaLinkTraps 2 } -- 1.3.6.1.4.1.2011.5.25.157.2.3.3 hwDslImaLinkLods NOTIFICATION-TYPE OBJECTS { hwDslGroupImaIfIndex, hwDslLinkIfIndex, hwDslGroupImaIfName, hwDslLinkIfName } STATUS current DESCRIPTION "The ima link lods notification." ::= { hwDslImaLinkTraps 3 } -- 1.3.6.1.4.1.2011.5.25.157.2.3.4 hwDslImaLinkLodsResume NOTIFICATION-TYPE OBJECTS { hwDslGroupImaIfIndex, hwDslLinkIfIndex, hwDslGroupImaIfName, hwDslLinkIfName } STATUS current DESCRIPTION "The ima link lods resume notification." ::= { hwDslImaLinkTraps 4 } -- 1.3.6.1.4.1.2011.5.25.157.2.3.5 hwDslImaLinkRfi NOTIFICATION-TYPE OBJECTS { hwDslGroupImaIfIndex, hwDslLinkIfIndex, hwDslGroupImaIfName, hwDslLinkIfName } STATUS current DESCRIPTION "The ima link rfi notification." ::= { hwDslImaLinkTraps 5 } -- 1.3.6.1.4.1.2011.5.25.157.2.3.6 hwDslImaLinkRfiResume NOTIFICATION-TYPE OBJECTS { hwDslGroupImaIfIndex, hwDslLinkIfIndex, hwDslGroupImaIfName, hwDslLinkIfName } STATUS current DESCRIPTION "The ima link rfi resume notification." ::= { hwDslImaLinkTraps 6 } -- 1.3.6.1.4.1.2011.5.25.157.2.3.7 hwDslImaLinkReTxUnusable NOTIFICATION-TYPE OBJECTS { hwDslGroupImaIfIndex, hwDslLinkIfIndex, hwDslGroupImaIfName, hwDslLinkIfName } STATUS current DESCRIPTION "The ima link remote tx unusable notification." ::= { hwDslImaLinkTraps 7 } -- 1.3.6.1.4.1.2011.5.25.157.2.3.8 hwDslImaLinkReTxUsable NOTIFICATION-TYPE OBJECTS { hwDslGroupImaIfIndex, hwDslLinkIfIndex, hwDslGroupImaIfName, hwDslLinkIfName } STATUS current DESCRIPTION "The ima link remote tx usable notification." ::= { hwDslImaLinkTraps 8 } -- 1.3.6.1.4.1.2011.5.25.157.2.3.9 hwDslImaLinkReRxUnusable NOTIFICATION-TYPE OBJECTS { hwDslGroupImaIfIndex, hwDslLinkIfIndex, hwDslGroupImaIfName, hwDslLinkIfName } STATUS current DESCRIPTION "The ima link remote rx unusable notification." ::= { hwDslImaLinkTraps 9 } -- 1.3.6.1.4.1.2011.5.25.157.2.3.10 hwDslImaLinkReRxUsable NOTIFICATION-TYPE OBJECTS { hwDslGroupImaIfIndex, hwDslLinkIfIndex, hwDslGroupImaIfName, hwDslLinkIfName } STATUS current DESCRIPTION "The ima link remote tx usable notification." ::= { hwDslImaLinkTraps 10 } -- 1.3.6.1.4.1.2011.5.25.157.2.4 hwDslLinkTraps OBJECT IDENTIFIER ::= { hwPortNotifications 4 } -- 1.3.6.1.4.1.2011.5.25.157.2.4.1 hwDslLinkFrameLost NOTIFICATION-TYPE OBJECTS { hwBoundDslGroupIfIndex, hwDslLinkIfIndex, hwBoundDslGroupIfName, hwDslLinkIfName } STATUS current DESCRIPTION "The dsl link frame lost notification." ::= { hwDslLinkTraps 1 } -- 1.3.6.1.4.1.2011.5.25.157.2.4.2 hwDslLinkFrameResume NOTIFICATION-TYPE OBJECTS { hwBoundDslGroupIfIndex, hwDslLinkIfIndex, hwBoundDslGroupIfName, hwDslLinkIfName } STATUS current DESCRIPTION "The dsl link frame resume notification." ::= { hwDslLinkTraps 2 } -- 1.3.6.1.4.1.2011.5.25.157.2.4.3 hwDslLinkSignalLost NOTIFICATION-TYPE OBJECTS { hwBoundDslGroupIfIndex, hwDslLinkIfIndex, hwBoundDslGroupIfName, hwDslLinkIfName } STATUS current DESCRIPTION "The dsl link signal lost notification." ::= { hwDslLinkTraps 3 } -- 1.3.6.1.4.1.2011.5.25.157.2.4.4 hwDslLinkSignalResume NOTIFICATION-TYPE OBJECTS { hwBoundDslGroupIfIndex, hwDslLinkIfIndex, hwBoundDslGroupIfName, hwDslLinkIfName } STATUS current DESCRIPTION "The dsl link signal resume notification." ::= { hwDslLinkTraps 4 } -- 1.3.6.1.4.1.2011.5.25.157.2.5 hwCesPwRemoteLosPktAlarm NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 5 } -- 1.3.6.1.4.1.2011.5.25.157.2.6 hwCesPwRemoteLosPktAlarmResume NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 6 } -- 1.3.6.1.4.1.2011.5.25.157.2.7 hwCesPwOppositeRai NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 7 } -- 1.3.6.1.4.1.2011.5.25.157.2.8 hwCesPwOppositeRaiResume NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 8 } -- 1.3.6.1.4.1.2011.5.25.157.2.9 hwLosAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 9 } -- 1.3.6.1.4.1.2011.5.25.157.2.10 hwLosAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 10 } -- 1.3.6.1.4.1.2011.5.25.157.2.11 hwLofAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 11 } -- 1.3.6.1.4.1.2011.5.25.157.2.12 hwLofAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 12 } -- 1.3.6.1.4.1.2011.5.25.157.2.13 hwOofAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 13 } -- 1.3.6.1.4.1.2011.5.25.157.2.14 hwOofAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 14 } -- 1.3.6.1.4.1.2011.5.25.157.2.15 hwB1TcaAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 15 } -- 1.3.6.1.4.1.2011.5.25.157.2.16 hwB1TcaAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 16 } -- 1.3.6.1.4.1.2011.5.25.157.2.17 hwB2TcaAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 17 } -- 1.3.6.1.4.1.2011.5.25.157.2.18 hwB2TcaAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 18 } -- 1.3.6.1.4.1.2011.5.25.157.2.19 hwJ0TimAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 19 } -- 1.3.6.1.4.1.2011.5.25.157.2.20 hwJ0TimAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 20 } -- 1.3.6.1.4.1.2011.5.25.157.2.21 hwLrdiAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 21 } -- 1.3.6.1.4.1.2011.5.25.157.2.22 hwLrdiAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 22 } -- 1.3.6.1.4.1.2011.5.25.157.2.23 hwSfbereAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 23 } -- 1.3.6.1.4.1.2011.5.25.157.2.24 hwSfbereAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 24 } -- 1.3.6.1.4.1.2011.5.25.157.2.25 hwAuLopAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 25 } -- 1.3.6.1.4.1.2011.5.25.157.2.26 hwAuLopAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 26 } -- 1.3.6.1.4.1.2011.5.25.157.2.27 hwLaisAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 27 } -- 1.3.6.1.4.1.2011.5.25.157.2.28 hwLaisAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 28 } -- 1.3.6.1.4.1.2011.5.25.157.2.29 hwSdbereAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 29 } -- 1.3.6.1.4.1.2011.5.25.157.2.30 hwSdbereAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 30 } -- 1.3.6.1.4.1.2011.5.25.157.2.31 hwPtimAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 31 } -- 1.3.6.1.4.1.2011.5.25.157.2.32 hwPtimAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 32 } -- 1.3.6.1.4.1.2011.5.25.157.2.33 hwPuneqAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 33 } -- 1.3.6.1.4.1.2011.5.25.157.2.34 hwPuneqAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 34 } -- 1.3.6.1.4.1.2011.5.25.157.2.35 hwPrdiAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 35 } -- 1.3.6.1.4.1.2011.5.25.157.2.36 hwPrdiAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 36 } -- 1.3.6.1.4.1.2011.5.25.157.2.37 hwB3TcaAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 37 } -- 1.3.6.1.4.1.2011.5.25.157.2.38 hwB3TcaAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 38 } -- 1.3.6.1.4.1.2011.5.25.157.2.39 hwPplmAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 39 } -- 1.3.6.1.4.1.2011.5.25.157.2.40 hwPplmAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 40 } -- 1.3.6.1.4.1.2011.5.25.157.2.41 hwPaisAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 41 } -- 1.3.6.1.4.1.2011.5.25.157.2.42 hwPaisAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 42 } -- 1.3.6.1.4.1.2011.5.25.157.2.43 hwAuAisAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 43 } -- 1.3.6.1.4.1.2011.5.25.157.2.44 hwAuAisAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 44 } -- 1.3.6.1.4.1.2011.5.25.157.2.45 hwVlopAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 45 } -- 1.3.6.1.4.1.2011.5.25.157.2.46 hwVlopAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 46 } -- 1.3.6.1.4.1.2011.5.25.157.2.47 hwLomAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 47 } -- 1.3.6.1.4.1.2011.5.25.157.2.48 hwLomAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 48 } -- 1.3.6.1.4.1.2011.5.25.157.2.49 hwLpTimVc12Alarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 49 } -- 1.3.6.1.4.1.2011.5.25.157.2.50 hwLpTimVc12AlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 50 } -- 1.3.6.1.4.1.2011.5.25.157.2.51 hwLpUneqVc12Alarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 51 } -- 1.3.6.1.4.1.2011.5.25.157.2.52 hwLpUneqVc12AlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 52 } -- 1.3.6.1.4.1.2011.5.25.157.2.53 hwVrdiAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 53 } -- 1.3.6.1.4.1.2011.5.25.157.2.54 hwVrdiAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 54 } -- 1.3.6.1.4.1.2011.5.25.157.2.57 hwBip2TcaAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 57 } -- 1.3.6.1.4.1.2011.5.25.157.2.58 hwBip2TcaAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 58 } -- 1.3.6.1.4.1.2011.5.25.157.2.59 hwLpSlmVc12Alarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 59 } -- 1.3.6.1.4.1.2011.5.25.157.2.60 hwLpSlmVc12AlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 60 } -- 1.3.6.1.4.1.2011.5.25.157.2.61 hwTuAisVc12Alarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 61 } -- 1.3.6.1.4.1.2011.5.25.157.2.62 hwTuAisVc12AlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 62 } -- 1.3.6.1.4.1.2011.5.25.157.2.63 hwE1EsTcaAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 63 } -- 1.3.6.1.4.1.2011.5.25.157.2.64 hwE1EsTcaAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 64 } -- 1.3.6.1.4.1.2011.5.25.157.2.67 hwE1LmfaAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 67 } -- 1.3.6.1.4.1.2011.5.25.157.2.68 hwE1LmfaAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 68 } -- 1.3.6.1.4.1.2011.5.25.157.2.69 hwE1UpE1AisAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 69 } -- 1.3.6.1.4.1.2011.5.25.157.2.70 hwE1UpE1AisAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 70 } -- 1.3.6.1.4.1.2011.5.25.157.2.71 hwE1AlmE1RaiAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 71 } -- 1.3.6.1.4.1.2011.5.25.157.2.72 hwE1AlmE1RaiAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 72 } -- 1.3.6.1.4.1.2011.5.25.157.2.73 hwCesPwOppositeAcFault NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 73 } -- 1.3.6.1.4.1.2011.5.25.157.2.74 hwCesPwOppositeAcFaultResume NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 74 } -- 1.3.6.1.4.1.2011.5.25.157.2.75 hwCesLosPktExcAlarm NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 75 } -- 1.3.6.1.4.1.2011.5.25.157.2.76 hwCesLosPktExcAlarmResume NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 76 } -- 1.3.6.1.4.1.2011.5.25.157.2.77 hwCesMisorderPktExcAlarm NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 77 } -- 1.3.6.1.4.1.2011.5.25.157.2.78 hwCesMisorderPktExcAlarmResume NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 78 } -- 1.3.6.1.4.1.2011.5.25.157.2.79 hwCesStrayPktExcAlarm NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 79 } -- 1.3.6.1.4.1.2011.5.25.157.2.80 hwCesStrayPktExcAlarmResume NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 80 } -- 1.3.6.1.4.1.2011.5.25.157.2.81 hwCesMalPktExcAlarm NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 81 } -- 1.3.6.1.4.1.2011.5.25.157.2.82 hwCesMalPktExcAlarmResume NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 82 } -- 1.3.6.1.4.1.2011.5.25.157.2.83 hwCesJtrUdrExcAlarm NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 83 } -- 1.3.6.1.4.1.2011.5.25.157.2.84 hwCesJtrUdrExcAlarmResume NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 84 } -- 1.3.6.1.4.1.2011.5.25.157.2.85 hwCesJtrOvrExcAlarm NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 85 } -- 1.3.6.1.4.1.2011.5.25.157.2.86 hwCesJtrOvrExcAlarmResume NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 86 } -- 1.3.6.1.4.1.2011.5.25.157.2.87 hwRroolAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 87 } -- 1.3.6.1.4.1.2011.5.25.157.2.88 hwRroolAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 88 } -- 1.3.6.1.4.1.2011.5.25.157.2.89 hwVrfiAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 89 } -- 1.3.6.1.4.1.2011.5.25.157.2.90 hwVrfiAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 90 } -- 1.3.6.1.4.1.2011.5.25.157.2.91 hwV5VcaisAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 91 } -- 1.3.6.1.4.1.2011.5.25.157.2.92 hwV5VcaisAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 92 } -- 1.3.6.1.4.1.2011.5.25.157.2.95 hwCposE1AlmE1RaiAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 95 } -- 1.3.6.1.4.1.2011.5.25.157.2.96 hwCposE1AlmE1RaiAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 96 } -- 1.3.6.1.4.1.2011.5.25.157.2.97 hwCposE1LfaAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 97 } -- 1.3.6.1.4.1.2011.5.25.157.2.98 hwCposE1LfaAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 98 } -- 1.3.6.1.4.1.2011.5.25.157.2.99 hwCposE1UpE1AisAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 99 } -- 1.3.6.1.4.1.2011.5.25.157.2.100 hwCposE1UpE1AisAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 100 } -- 1.3.6.1.4.1.2011.5.25.157.2.101 hwCposE1DownE1AisAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 101 } -- 1.3.6.1.4.1.2011.5.25.157.2.102 hwCposE1DownE1AisAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 102 } -- 1.3.6.1.4.1.2011.5.25.157.2.103 hwE1DownE1AisAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 103 } -- 1.3.6.1.4.1.2011.5.25.157.2.104 hwE1DownE1AisAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 104 } -- 1.3.6.1.4.1.2011.5.25.157.2.111 hwCposE1LmfaAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 111 } -- 1.3.6.1.4.1.2011.5.25.157.2.112 hwCposE1LmfaAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 112 } -- 1.3.6.1.4.1.2011.5.25.157.2.113 hwLaserShutAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 113 } -- 1.3.6.1.4.1.2011.5.25.157.2.114 hwLaserShutAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 114 } -- 1.3.6.1.4.1.2011.5.25.157.2.115 hwLaserAutoShutAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 115 } -- 1.3.6.1.4.1.2011.5.25.157.2.116 hwLaserAutoShutAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 116 } -- 1.3.6.1.4.1.2011.5.25.157.2.117 hwLoopbackAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName, hwPhysicalLoopbackType } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 117 } -- 1.3.6.1.4.1.2011.5.25.157.2.118 hwLoopbackAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName, hwPhysicalLoopbackType } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 118 } -- 1.3.6.1.4.1.2011.5.25.157.2.119 hwOcdAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 119 } -- 1.3.6.1.4.1.2011.5.25.157.2.120 hwOcdAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 120 } -- 1.3.6.1.4.1.2011.5.25.157.2.121 hwLcdAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 121 } -- 1.3.6.1.4.1.2011.5.25.157.2.122 hwLcdAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 122 } -- 1.3.6.1.4.1.2011.5.25.157.2.123 hwUhcsAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 123 } -- 1.3.6.1.4.1.2011.5.25.157.2.124 hwUhcsAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 124 } -- 1.3.6.1.4.1.2011.5.25.157.2.125 hwChcsAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 125 } -- 1.3.6.1.4.1.2011.5.25.157.2.126 hwChcsAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 126 } -- 1.3.6.1.4.1.2011.5.25.157.2.127 hwChannelLoopbackAlarm NOTIFICATION-TYPE OBJECTS { hwSDHHpPerfCurrentIfIndex, hwSDHLpPerfCurrentIfIndex, hwPhysicalLoopbackType, hwPhysicalPortIfIndex, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 127 } -- 1.3.6.1.4.1.2011.5.25.157.2.128 hwChannelLoopbackAlarmResume NOTIFICATION-TYPE OBJECTS { hwSDHHpPerfCurrentIfIndex, hwSDHLpPerfCurrentIfIndex, hwPhysicalLoopbackType, hwPhysicalPortIfIndex, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 128 } -- 1.3.6.1.4.1.2011.5.25.157.2.129 hwCesLopsAlarm NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 129 } -- 1.3.6.1.4.1.2011.5.25.157.2.130 hwCesLopsAlarmResume NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 130 } -- 1.3.6.1.4.1.2011.5.25.157.2.131 hwAtmPwLosPktExcAlarm NOTIFICATION-TYPE OBJECTS { hwAtmVcID, hwAtmVcType, hwAtmPeerIpAddr, hwAtmPWPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 131 } -- 1.3.6.1.4.1.2011.5.25.157.2.132 hwAtmPwLosPktExcAlarmResume NOTIFICATION-TYPE OBJECTS { hwAtmVcID, hwAtmVcType, hwAtmPeerIpAddr, hwAtmPWPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 132 } -- 1.3.6.1.4.1.2011.5.25.157.2.133 hwAtmPwMisorderPktExcAlarm NOTIFICATION-TYPE OBJECTS { hwAtmVcID, hwAtmVcType, hwAtmPeerIpAddr, hwAtmPWPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 133 } -- 1.3.6.1.4.1.2011.5.25.157.2.134 hwAtmPwMisorderPktExcAlarmResume NOTIFICATION-TYPE OBJECTS { hwAtmVcID, hwAtmVcType, hwAtmPeerIpAddr, hwAtmPWPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 134 } -- 1.3.6.1.4.1.2011.5.25.157.2.135 hwAtmPwUnknownCellExcAlarm NOTIFICATION-TYPE OBJECTS { hwAtmVcID, hwAtmVcType, hwAtmPeerIpAddr, hwAtmPWPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 135 } -- 1.3.6.1.4.1.2011.5.25.157.2.136 hwAtmPwUnknownCellExcAlarmResume NOTIFICATION-TYPE OBJECTS { hwAtmVcID, hwAtmVcType, hwAtmPeerIpAddr, hwAtmPWPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 136 } -- 1.3.6.1.4.1.2011.5.25.157.2.153 hwInputErrorAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "The port input errors notification." ::= { hwPortNotifications 153 } -- 1.3.6.1.4.1.2011.5.25.157.2.154 hwInputErrorAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "The port input errors resume notification." ::= { hwPortNotifications 154 } -- 1.3.6.1.4.1.2011.5.25.157.2.155 hwOutputErrorAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "The port output errors notification." ::= { hwPortNotifications 155 } -- 1.3.6.1.4.1.2011.5.25.157.2.156 hwOutputErrorAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "The port output errors resume notification." ::= { hwPortNotifications 156 } -- 1.3.6.1.4.1.2011.5.25.157.2.157 hwPortAlarmTraps OBJECT IDENTIFIER ::= { hwPortNotifications 157 } -- 1.3.6.1.4.1.2011.5.25.157.2.157.1 hwPhysicalPortCrcError NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwPhysicalPortCrcErrorStatistics, hwPhysicalPortCrcErrorHighThreshold, hwPhysicalPortCrcErrorLowThreshold, hwPhysicalPortCrcErrorInterval } STATUS current DESCRIPTION "Port Crc error alarm notification." ::= { hwPortAlarmTraps 1 } -- 1.3.6.1.4.1.2011.5.25.157.2.157.2 hwPhysicalPortCrcErrorResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwPhysicalPortCrcErrorStatistics, hwPhysicalPortCrcErrorHighThreshold, hwPhysicalPortCrcErrorLowThreshold, hwPhysicalPortCrcErrorInterval } STATUS current DESCRIPTION "Port Crc error alarm resume." ::= { hwPortAlarmTraps 2 } -- 1.3.6.1.4.1.2011.5.25.157.2.157.3 hwPhysicalPortSymbolError NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwPhysicalPortSymbolErrorStatistics, hwPhysicalPortSymbolErrorHighThreshold, hwPhysicalPortSymbolErrorLowThreshold, hwPhysicalPortSymbolErrorInterval } STATUS current DESCRIPTION "Port Symbol error alarm notification." ::= { hwPortAlarmTraps 3 } -- 1.3.6.1.4.1.2011.5.25.157.2.157.4 hwPhysicalPortSymbolErrorResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwPhysicalPortSymbolErrorStatistics, hwPhysicalPortSymbolErrorHighThreshold, hwPhysicalPortSymbolErrorLowThreshold, hwPhysicalPortSymbolErrorInterval } STATUS current DESCRIPTION "Port Symbol error alarm resume." ::= { hwPortAlarmTraps 4 } -- 1.3.6.1.4.1.2011.5.25.157.2.157.5 hwPhysicalPortSdhError NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwPhysicalPortSdhErrorStatistics, hwPhysicalPortSdhErrorHighThreshold, hwPhysicalPortSdhErrorLowThreshold, hwPhysicalPortSdhErrorInterval } STATUS current DESCRIPTION "Port Sdh error alarm notification." ::= { hwPortAlarmTraps 5 } -- 1.3.6.1.4.1.2011.5.25.157.2.157.6 hwPhysicalPortSdhErrorResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwPhysicalPortSdhErrorStatistics, hwPhysicalPortSdhErrorHighThreshold, hwPhysicalPortSdhErrorLowThreshold, hwPhysicalPortSdhErrorInterval } STATUS current DESCRIPTION "Port Sdh error alarm resume." ::= { hwPortAlarmTraps 6 } -- 1.3.6.1.4.1.2011.5.25.157.2.157.7 hwPhysicalPortBip8SdError NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwPhysicalPortBIP8SDErrorThreshold } STATUS current DESCRIPTION "Port BIP8 Signal Degrade alarm notification." ::= { hwPortAlarmTraps 7 } -- 1.3.6.1.4.1.2011.5.25.157.2.157.8 hwPhysicalPortBip8SdErrorResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwPhysicalPortBIP8SDErrorThreshold } STATUS current DESCRIPTION "Port BIP8 Signal Degrade alarm resume." ::= { hwPortAlarmTraps 8 } -- 1.3.6.1.4.1.2011.5.25.157.2.157.9 hwPhysicalPortCrcPacketErrorRatio NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwPhysicalPortCrcPerCurrentValueString, hwPhysicalPortCrcPerAlarmThresholdString, hwPhysicalPortCrcPerResumeThresholdString } STATUS current DESCRIPTION "Port CRC-PER(Packet Error Ratio) alarm notification." ::= { hwPortAlarmTraps 9 } -- 1.3.6.1.4.1.2011.5.25.157.2.157.10 hwPhysicalPortCrcPacketErrorRatioResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwPhysicalPortCrcPerCurrentValueString, hwPhysicalPortCrcPerAlarmThresholdString, hwPhysicalPortCrcPerResumeThresholdString } STATUS current DESCRIPTION "Port CRC-PER(Packet Error Ratio) alarm resume notification." ::= { hwPortAlarmTraps 10 } -- 1.3.6.1.4.1.2011.5.25.157.2.160 hwLoopBackAutoClearNotice NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName } STATUS current DESCRIPTION "set port undo loopback while set loopback autoclear enable when time out." ::= { hwPortNotifications 160 } -- 1.3.6.1.4.1.2011.5.25.157.2.161 hwChannelLoopBackAutoClearNotice NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName, hwDs1ChannelId } STATUS current DESCRIPTION "set channel undo loopback while set loopback autoclear enable when time out." ::= { hwPortNotifications 161 } -- 1.3.6.1.4.1.2011.5.25.157.2.162 hwHpJ1TiuAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPhysicalPortName } STATUS current DESCRIPTION "Trace Identifier Unstable in the Higher order Path." ::= { hwPortNotifications 162 } -- 1.3.6.1.4.1.2011.5.25.157.2.163 hwHpJ1TiuAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPhysicalPortName } STATUS current DESCRIPTION "Trace Identifier Unstable in the Higher order Path alarm resume." ::= { hwPortNotifications 163 } -- 1.3.6.1.4.1.2011.5.25.157.2.164 hwPortAlarmInverseAutoRecover NOTIFICATION-TYPE OBJECTS { hwPhysicalPortName } STATUS current DESCRIPTION "Port alarm inverse auto recover." ::= { hwPortNotifications 164 } -- 1.3.6.1.4.1.2011.5.25.157.11 hwPortConformance OBJECT IDENTIFIER ::= { hwPortMIB 11 } -- 1.3.6.1.4.1.2011.5.25.157.11.1 hwPortCompliances OBJECT IDENTIFIER ::= { hwPortConformance 1 } -- 1.3.6.1.4.1.2011.5.25.157.11.1.1 hwPortCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for systems supporting the HUAWEI-PORT-MIB." MODULE -- this module MANDATORY-GROUPS { hwEthernetObjectGroup, hwPosObjectGroup, hwCposObjectGroup, hwBundleSerialObjectGroup, hwDs0ChannelBundleObjectGroup, hwDs1ObjectGroup, hwDs3ObjectGroup, hwPortNotificationsGroup, hwPortAlarmThresholdObjectGroup, hwPortAlarmDownEnableObjectGroup } ::= { hwPortCompliances 1 } -- 1.3.6.1.4.1.2011.5.25.157.11.2 hwPortGroups OBJECT IDENTIFIER ::= { hwPortConformance 2 } -- 1.3.6.1.4.1.2011.5.25.157.11.2.1 hwEthernetObjectGroup OBJECT-GROUP OBJECTS { hwEthernetLoopback, hwEthernetPortType, hwEthernetSpeedSet, hwEthernetDuplex, hwEthernetNegotiation, hwEthernetPortTypeOperate, hwEthernetClock, hwEthernetFlagJ0Mode, hwEthernetFlagJ0Value, hwEthernetFlagJ0Trace, hwEthernetFlagJ1Mode, hwEthernetFlagJ1Value, hwEthernetFlagJ1Trace, hwEthernetFlagC2Value, hwEthernetUpHoldTime, hwEthernetDownHoldTime, hwEthernetSubinterfaceStatisticEnable, hwEthernetJumboframeMaxLength, hwEthernetComboType, hwEthernetPortMode } STATUS current DESCRIPTION "The Port attribute group." ::= { hwPortGroups 1 } -- 1.3.6.1.4.1.2011.5.25.157.11.2.2 hwPosObjectGroup OBJECT-GROUP OBJECTS { hwPosLinkProtocol, hwPosFrameFormat, hwPosLoopback, hwPosScramble, hwPosClock, hwPosCrcVerifyCode, hwPosFlagJ0Mode, hwPosFlagJ0Value, hwPosFlagJ0Trace, hwPosFlagJ1Mode, hwPosFlagJ1Value, hwPosFlagJ1Trace, hwPosFlagC2Value } STATUS current DESCRIPTION "The Port attribute group." ::= { hwPortGroups 2 } -- 1.3.6.1.4.1.2011.5.25.157.11.2.3 hwCposObjectGroup OBJECT-GROUP OBJECTS { hwCposFrameFormat, hwCposMultiplex, hwCposClock, hwCposIfType, hwCposLoopback, hwCposFlagJ0Mode, hwCposFlagJ0Value, hwCposFlagJ0Trace, hwCposFlagJ1Mode, hwCposFlagJ1Value, hwCposFlagJ1Trace, hwCposFlagC2Value, hwCposB1SdAlarmThreshold, hwCposB1ExcAlarmThreshold, hwCposB2SdAlarmThreshold, hwCposB2ExcAlarmThreshold, hwCposB3SdAlarmThreshold, hwCposB3ExcAlarmThreshold, hwCposLpBipSdAlarmThreshold, hwCposLpBipExcAlarmThreshold, hwCposHighPathNumber, hwCposLowPathNumber, hwCposMappingMode } STATUS current DESCRIPTION "The Port attribute group." ::= { hwPortGroups 3 } -- 1.3.6.1.4.1.2011.5.25.157.11.2.4 hwDs0ChannelBundleObjectGroup OBJECT-GROUP OBJECTS { hwDs0ChannelBundleIfIndex, hwDs0ChannelBundleTimeSlots, hwDs0ChannelBundleSpeed, hwDs0ChannelBundleIsMasterPW, hwDs0ChannelBundleMasterPWStatus, hwDs0ChannelBundlePortName, hwDs0ChannelBundleRowStatus } STATUS current DESCRIPTION "The Port attribute group." ::= { hwPortGroups 4 } -- 1.3.6.1.4.1.2011.5.25.157.11.2.5 hwDs1ObjectGroup OBJECT-GROUP OBJECTS { hwDs1ChannelType, hwDs1IfType, hwDs1Channelized, hwDs1CodeType, hwDs1Clock, hwDs1FrameFormat, hwDs1Cable, hwDs1Loopback, hwDs1ClockRecoveryDomain, hwDs1PWClockDomain, hwDs1WorkMode, hwDs1RowStatus } STATUS current DESCRIPTION "The Port attribute group." ::= { hwPortGroups 5 } -- 1.3.6.1.4.1.2011.5.25.157.11.2.6 hwDs3ObjectGroup OBJECT-GROUP OBJECTS { hwDs3ChannelType, hwDs3IfType, hwDs3Channelized, hwDs3Clock, hwDs3FrameFormat, hwDs3Scramble, hwDs3Cable, hwDs3NationalBit, hwDs3Loopback, hwDs3CreateSerial, hwDs3RowStatus } STATUS current DESCRIPTION "The Port attribute group." ::= { hwPortGroups 6 } -- 1.3.6.1.4.1.2011.5.25.157.11.2.7 hwBundleSerialObjectGroup OBJECT-GROUP OBJECTS { hwBundleSerialLinkProtocol, hwBundleSerialTimerHold, hwBundleSerialCrcVerifyCode, hwBundleSerialLoopback } STATUS current DESCRIPTION "The Port attribute group." ::= { hwPortGroups 7 } -- 1.3.6.1.4.1.2011.5.25.157.11.2.8 hwPortNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { hwPortACRMasterPWChange, hwHpJ1TiuAlarm, hwHpJ1TiuAlarmResume, hwCesPwOppositeAcFault, hwCesPwOppositeAcFaultResume, hwCesLosPktExcAlarm, hwCesLosPktExcAlarmResume, hwCesMisorderPktExcAlarm, hwCesMisorderPktExcAlarmResume, hwCesStrayPktExcAlarm, hwCesStrayPktExcAlarmResume, hwCesMalPktExcAlarm, hwCesMalPktExcAlarmResume, hwCesJtrUdrExcAlarm, hwCesJtrUdrExcAlarmResume, hwCesJtrOvrExcAlarm, hwCesJtrOvrExcAlarmResume, hwLaserShutAlarm, hwLaserShutAlarmResume, hwLaserAutoShutAlarm, hwLaserAutoShutAlarmResume, hwLoopbackAlarm, hwLoopbackAlarmResume, hwChannelLoopbackAlarm, hwChannelLoopbackAlarmResume, hwCesPwOppositeRaiResume, hwCesPwOppositeRai, hwB1TcaAlarm, hwB1TcaAlarmResume, hwB2TcaAlarm, hwB2TcaAlarmResume, hwOofAlarm, hwOofAlarmResume, hwLosAlarm, hwLosAlarmResume, hwJ0TimAlarm, hwJ0TimAlarmResume, hwLrdiAlarm, hwLrdiAlarmResume, hwSfbereAlarm, hwSfbereAlarmResume, hwAuLopAlarm, hwAuLopAlarmResume, hwLaisAlarm, hwLaisAlarmResume, hwSdbereAlarm, hwSdbereAlarmResume, hwPtimAlarm, hwPtimAlarmResume, hwPuneqAlarm, hwPuneqAlarmResume, hwPrdiAlarm, hwPrdiAlarmResume, hwB3TcaAlarm, hwB3TcaAlarmResume, hwPplmAlarm, hwPplmAlarmResume, hwPaisAlarm, hwPaisAlarmResume, hwAuAisAlarm, hwAuAisAlarmResume, hwVlopAlarm, hwVlopAlarmResume, hwLomAlarm, hwLomAlarmResume, hwLpTimVc12Alarm, hwLpTimVc12AlarmResume, hwLofAlarm, hwLofAlarmResume, hwCesPwRemoteLosPktAlarm, hwCesPwRemoteLosPktAlarmResume, hwLpUneqVc12Alarm, hwLpUneqVc12AlarmResume, hwVrdiAlarm, hwVrdiAlarmResume, hwBip2TcaAlarm, hwBip2TcaAlarmResume, hwLpSlmVc12Alarm, hwLpSlmVc12AlarmResume, hwTuAisVc12Alarm, hwTuAisVc12AlarmResume, hwE1EsTcaAlarm, hwE1EsTcaAlarmResume, hwE1LmfaAlarm, hwE1LmfaAlarmResume, hwE1UpE1AisAlarm, hwE1UpE1AisAlarmResume, hwE1AlmE1RaiAlarm, hwE1AlmE1RaiAlarmResume, hwRroolAlarm, hwRroolAlarmResume, hwVrfiAlarm, hwVrfiAlarmResume, hwV5VcaisAlarm, hwV5VcaisAlarmResume, hwCposE1AlmE1RaiAlarm, hwCposE1AlmE1RaiAlarmResume, hwCposE1LfaAlarm, hwCposE1LfaAlarmResume, hwCposE1UpE1AisAlarm, hwCposE1UpE1AisAlarmResume, hwCposE1DownE1AisAlarm, hwCposE1DownE1AisAlarmResume, hwE1DownE1AisAlarm, hwE1DownE1AisAlarmResume, hwCposE1LmfaAlarm, hwCposE1LmfaAlarmResume, hwOcdAlarm, hwOcdAlarmResume, hwLcdAlarm, hwLcdAlarmResume, hwUhcsAlarm, hwUhcsAlarmResume, hwChcsAlarm, hwChcsAlarmResume, hwCesLopsAlarm, hwCesLopsAlarmResume, hwAtmPwLosPktExcAlarm, hwAtmPwLosPktExcAlarmResume, hwAtmPwMisorderPktExcAlarm, hwAtmPwMisorderPktExcAlarmResume, hwAtmPwUnknownCellExcAlarm, hwAtmPwUnknownCellExcAlarmResume, hwPortAlarmInverseAutoRecover } STATUS current DESCRIPTION "This is the group of port notifiction." ::= { hwPortGroups 8 } -- 1.3.6.1.4.1.2011.5.25.157.11.2.9 hwDslGroupObjectGroup OBJECT-GROUP OBJECTS { hwDslGroupIfIndex, hwDslGroupWorkMode, hwDslGroupBisState, hwDslGroupEncapeMode, hwDslGroupEnable, hwDslGroupRowStatus, hwDslGroupIfIndexOfBound, hwVirtualEthernetIfIndex, hwBoundVeRowStatus, hwDslGroupVci, hwDslGroupVpi, hwDslGroupPvcId } STATUS current DESCRIPTION "The dsl group attribute group." ::= { hwPortGroups 9 } -- 1.3.6.1.4.1.2011.5.25.157.11.2.10 hwDslGroupImaObjectGroup OBJECT-GROUP OBJECTS { hwDslGroupImaVersion, hwDslGroupImaFrameLen, hwDslGroupImaReset, hwDslGroupImaRxMinLinkNum, hwDslGroupImaNeState, hwDslGroupImaRxActLinkNum, hwDslGroupImaRxCellRate, hwDslGroupImaTxActLinkNum, hwDslGroupImaTxCellRate, hwDslGroupImaFeState, hwDslGroupImaIfIndex, hwDslGroupImaTxMinLinkNum, hwDslGroupImaIfName } STATUS current DESCRIPTION "The dsl group ima attribute group." ::= { hwPortGroups 10 } -- 1.3.6.1.4.1.2011.5.25.157.11.2.11 hwDslLinkObjectGroup OBJECT-GROUP OBJECTS { hwBoundDslGroupIfIndex, hwDslLinkIfIndex, hwDslLinkBoundRowStatus, hwDslLinkIfName, hwBoundDslGroupIfName } STATUS current DESCRIPTION "The dsl link attribute group." ::= { hwPortGroups 11 } -- 1.3.6.1.4.1.2011.5.25.157.11.2.20 hwDslImaTrapGroup NOTIFICATION-GROUP NOTIFICATIONS { hwDslImaGroupLEDown, hwDslImaGroupLEUp, hwDslImaGroupREDown, hwDslImaGroupREUp, hwDslImaLinkLif, hwDslImaLinkLifResume, hwDslImaLinkLods, hwDslImaLinkLodsResume, hwDslImaLinkRfi, hwDslImaLinkRfiResume, hwDslImaLinkReTxUnusable, hwDslImaLinkReTxUsable, hwDslImaLinkReRxUnusable, hwDslImaLinkReRxUsable } STATUS current DESCRIPTION "The dsl Ima Trap group." ::= { hwPortGroups 20 } -- 1.3.6.1.4.1.2011.5.25.157.11.2.21 hwDslLinkTrapGroup NOTIFICATION-GROUP NOTIFICATIONS { hwDslLinkFrameLost, hwDslLinkFrameResume, hwDslLinkSignalLost, hwDslLinkSignalResume } STATUS current DESCRIPTION "The dsl Link Trap group." ::= { hwPortGroups 21 } -- 1.3.6.1.4.1.2011.5.25.157.11.2.22 hwPortAlarmThresholdObjectGroup OBJECT-GROUP OBJECTS{ hwPhysicalPortCrcErrorStatistics, hwPhysicalPortCrcErrorHighThreshold, hwPhysicalPortCrcErrorLowThreshold, hwPhysicalPortCrcErrorInterval, hwPhysicalPortSymbolErrorStatistics, hwPhysicalPortSymbolErrorHighThreshold, hwPhysicalPortSymbolErrorLowThreshold, hwPhysicalPortSymbolErrorInterval, hwPhysicalPortInputErrorStatistics, hwPhysicalPortInputErrorHighThreshold, hwPhysicalPortInputErrorLowThreshold, hwPhysicalPortInputErrorInterval, hwPhysicalPortOutputErrorStatistics, hwPhysicalPortOutputErrorHighThreshold, hwPhysicalPortOutputErrorLowThreshold, hwPhysicalPortOutputErrorInterval, hwPhysicalPortSdhErrorStatistics, hwPhysicalPortSdhErrorHighThreshold, hwPhysicalPortSdhErrorLowThreshold, hwPhysicalPortSdhErrorInterval, hwPhysicalPortBIP8SDErrorThreshold } STATUS current DESCRIPTION "The port alarm threshold group." ::= { hwPortGroups 22 } -- 1.3.6.1.4.1.2011.5.25.157.11.2.23 hwPortAlarmDownEnableObjectGroup OBJECT-GROUP OBJECTS{ hwPhysicalPortCrcEnabledDown, hwPhysicalPortSymbolEnabledDown, hwPhysicalPortInputEnabledDown, hwPhysicalPortOutputEnabledDown, hwPhysicalPortSdhEnabledDown, hwPhysicalPortBip8SdEnabledDown } STATUS current DESCRIPTION "The port alarm down enable group." ::= { hwPortGroups 23 } -- 1.3.6.1.4.1.2011.5.25.157.11.2.25 hwPortAlarmTrapGroup OBJECT-GROUP OBJECTS{ hwPhysicalPortCrcError, hwPhysicalPortCrcErrorResume, hwPhysicalPortSymbolError, hwPhysicalPortSymbolErrorResume, hwPhysicalPortInputError, hwPhysicalPortInputErrorResume, hwPhysicalPortOutputError, hwPhysicalPortOutputErrorResume, hwPhysicalPortSdhError, hwPhysicalPortSdhErrorResume, hwPhysicalPortBip8SdError, hwPhysicalPortBip8SdErrorResume } STATUS current DESCRIPTION "The port alarm trap group." ::= { hwPortGroups 25 } END -- -- HUAWEI-PORT-MIB.mib --