-- ================================================================= -- Copyright (C) 2006 by HUAWEI TECHNOLOGIES. All rights reserved. -- -- Description: Huawei Ethernet ARP MIB -- Reference: HUAWEI Enterprise MIB -- Version: V1.0 -- History: -- Version: V1.1 -- History: -- chenzhiwei, 2009-08-07, add nodes for arp anti-attack. -- ================================================================= HUAWEI-ETHARP-MIB DEFINITIONS ::= BEGIN IMPORTS hwDatacomm FROM HUAWEI-MIB OBJECT-TYPE, MODULE-IDENTITY, OBJECT-TYPE, IpAddress, Counter32, Integer32, Unsigned32, NOTIFICATION-TYPE FROM SNMPv2-SMI PhysAddress, DisplayString, RowStatus FROM SNMPv2-TC NOTIFICATION-GROUP, OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF InterfaceIndex FROM IF-MIB InetAddressIPv4 FROM INET-ADDRESS-MIB MacAddress FROM SNMPv2-TC PhysicalIndex, entPhysicalIndex, entPhysicalName FROM ENTITY-MIB EnabledStatus FROM P-BRIDGE-MIB; hwEthernetARPMIB MODULE-IDENTITY LAST-UPDATED "200609050000Z" -- March 01, 2003 at 00:00 GMT ORGANIZATION "Huawei Technologies co., Ltd." CONTACT-INFO " R&D BeiJing, Huawei Technologies co.,Ltd. Huawei Bld.,NO.3 Xinxi Rd., Shang-Di Information Industry Base, Hai-Dian District Beijing P.R. China Zip:100085 Http://www.huawei.com E-mail:support@huawei.com " DESCRIPTION "This MIB describes objects used for managing Ethernet ARP, including ARP Speed-limit,ARP Limit etc. " REVISION "200606100000Z" -- February 12, 2003 at 00:00 GMT DESCRIPTION "The initial revision of this MIB module." ::= { hwDatacomm 123 } hwEthernetARPObjects OBJECT IDENTIFIER ::= { hwEthernetARPMIB 1 } -- ================================================================= -- 1st The Node of Anti-AttackLog -- ================================================================= hwEthernetARPAntiAttackLog OBJECT-TYPE SYNTAX Integer32(0..1200) MAX-ACCESS read-write STATUS current DESCRIPTION "To prevent log and trap from being attacked, the function is not enabled by default." ::= { hwEthernetARPObjects 1 } -- ================================================================= -- 2nd The Node of LearningStrict -- ================================================================= hwEthernetARPLearningStrict OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the ARP strict learning. In this way, routers can learn ARP entries only from the arp reply in response to the arp requrest send by the router." ::= { hwEthernetARPObjects 2 } -- ================================================================= -- 3rd The Table of ARP Speed Limit -- ================================================================= hwEthernetARPSpeedLimitTable OBJECT-TYPE SYNTAX SEQUENCE OF HwEthernetARPSpeedLimitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains the configuration information of Ethernet ARP Speed limit slot. The information includes type, speedvalue, sourceip and destip." ::= { hwEthernetARPObjects 3 } hwEthernetARPSpeedLimitEntry OBJECT-TYPE SYNTAX HwEthernetARPSpeedLimitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains the configuration information of Ethernet ARP Speed limit slot. The information includes type, speedvalue, sourceip and destip." INDEX {hwEthernetARPLimitSlot,hwEthernetARPLimitType,hwEthernetARPLimitIPType} ::= { hwEthernetARPSpeedLimitTable 1 } HwEthernetARPSpeedLimitEntry ::= SEQUENCE { hwEthernetARPLimitSlot Integer32 , hwEthernetARPLimitType INTEGER , hwEthernetARPLimitIPType INTEGER , hwEthernetARPLimitSpeedValue Unsigned32 } hwEthernetARPLimitSlot OBJECT-TYPE SYNTAX Integer32(0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The slot of ARP Speed Limit." ::= { hwEthernetARPSpeedLimitEntry 1 } hwEthernetARPLimitType OBJECT-TYPE SYNTAX INTEGER{ arp(1), arpmiss(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Type of ARP Speed Limit." ::= { hwEthernetARPSpeedLimitEntry 2 } hwEthernetARPLimitIPType OBJECT-TYPE SYNTAX INTEGER{ sourceip(4), destinationip(8) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "ARP speed limit is performed on a source or a destination IP address." ::= { hwEthernetARPSpeedLimitEntry 3 } hwEthernetARPLimitSpeedValue OBJECT-TYPE SYNTAX Unsigned32(0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION "The Speed Value of ARP Speed Limit." ::= { hwEthernetARPSpeedLimitEntry 4 } -- ================================================================= -- 5th The Table of ARP Speed Limit -- ================================================================= hwEthernetARPSpeedLimitIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates an interface enabled with ARP-MISS or an interface receiving the ARP packets." ::= { hwEthernetARPObjects 4 } -- ================================================================= -- 5th The Table of ARP Speed Limit -- ================================================================= hwEthernetARPSpeedLimitConfigured OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The Configured Speed Limit Value of ARP Speed Limit." ::= { hwEthernetARPObjects 5 } -- ================================================================= -- 5th The Table of ARP Speed Limit -- ================================================================= hwEthernetARPSpeedLimitCurrent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The Current Speed Limit Value of ARP Speed Limit." ::= { hwEthernetARPObjects 6 } -- ================================================================= -- 5th The Table of ARP Speed Limit -- ================================================================= hwEthernetARPSpeedLimitType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The Type of ARP Speed Limit." ::= { hwEthernetARPObjects 7 } -- ================================================================= -- 6th The Table of ARP Speed Limit -- ================================================================= hwEthernetARPSpeedLimitSrcIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The Source IP address of ARP Speed Limit." ::= { hwEthernetARPObjects 8 } -- ================================================================= -- 6th The Table of ARP Speed Limit -- ================================================================= hwEthernetARPSpeedLimitDstIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The Destination IP address of ARP Speed Limit." ::= { hwEthernetARPObjects 9 } -- ================================================================= -- 7th The Table of ARP Speed Limit -- ================================================================= hwEthernetARPSpeedLimitVPNinstance OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The VPN-instance name of ARP Speed Limit." ::= { hwEthernetARPObjects 10 } -- -- ARP LIMIT DEFINATION -- display arp statics begin hwEthernetARPStaticsTable OBJECT-TYPE SYNTAX SEQUENCE OF HwEthernetARPStaticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table contains the statistics about Ethernet ARP. The statistics include number of received ARP packets, number of received ARP-MISS packets, number of learned ARP packets, number of discarded ARP packets caused by the ARP limit, the number of discarded ARP-MISS packets caused by the limit and the number of discarded ARP and ARP-MISS packets caused by other reasons." ::= { hwEthernetARPObjects 11 } hwEthernetARPStaticsEntry OBJECT-TYPE SYNTAX HwEthernetARPStaticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table contains the statistics about Ethernet ARP. The statistics include number of received ARP packets, number of received ARP-MISS packets, number of learned ARP packets, number of discarded ARP packets caused by the ARP limit, the number of discarded ARP-MISS packets caused by the limit and the number of discarded ARP and ARP-MISS packets caused by other reasons." INDEX {hwEthernetARPStaticsSlot} ::= { hwEthernetARPStaticsTable 1 } HwEthernetARPStaticsEntry ::= SEQUENCE { hwEthernetARPStaticsSlot Integer32 , hwEthernetARPStaticsLearnTotal Counter32 , hwEthernetARPDropForLimit Counter32 , hwEthernetARPDropForARPSuppress Counter32 , hwEthernetARPDropForARPMissSuppress Counter32, hwEthernetARPDropForOther Counter32 , hwEthernetARPMissDropForOther Counter32 , hwEthernetARPRcvNum Counter32 , hwEthernetARPMissRcvNum Counter32 , hwEthernetARPStaticsOperation INTEGER , hwEthernetARPProxySupressNum Counter32 } hwEthernetARPStaticsSlot OBJECT-TYPE SYNTAX Integer32(0..128 | 65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The slot about which the ARP statistics are displayed." ::= { hwEthernetARPStaticsEntry 1 } hwEthernetARPStaticsLearnTotal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of the learned ARP packets." ::= { hwEthernetARPStaticsEntry 2 } hwEthernetARPDropForLimit OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of discarded packets caused by limit." ::= { hwEthernetARPStaticsEntry 3 } hwEthernetARPDropForARPSuppress OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of discarded packets caused by the ARP suppress." ::= { hwEthernetARPStaticsEntry 4 } hwEthernetARPDropForARPMissSuppress OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of discarded packets caused by the ARP-MISS suppress." ::= { hwEthernetARPStaticsEntry 5 } hwEthernetARPDropForOther OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of discarded ARP packets caused by other reasons." ::= { hwEthernetARPStaticsEntry 6 } hwEthernetARPMissDropForOther OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of discarded ARP-MISS caused by other reasons." ::= { hwEthernetARPStaticsEntry 7 } hwEthernetARPRcvNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received ARP packets." ::= { hwEthernetARPStaticsEntry 8 } hwEthernetARPMissRcvNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received ARP-MISS." ::= { hwEthernetARPStaticsEntry 9 } hwEthernetARPStaticsOperation OBJECT-TYPE SYNTAX INTEGER { reset(1), unused(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "resets the statistics about Ethernet ARP." ::= { hwEthernetARPStaticsEntry 10 } hwEthernetARPProxySupressNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of discarded packets caused by the ARP-PROXY suppress." ::= { hwEthernetARPStaticsEntry 11 } -- display arp statics end -- disp arp and statics with interface and vlanid begin hwEthARPShowWithInterAndVidTable OBJECT-TYPE SYNTAX SEQUENCE OF HwEthARPShowWithInterAndVidEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Display the ARP table based on interface number or interface number and VLAN ID." ::= { hwEthernetARPObjects 12 } hwEthARPShowWithInterAndVidEntry OBJECT-TYPE SYNTAX HwEthARPShowWithInterAndVidEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Display the ARP table based on interface number or interface number and VLAN ID." INDEX {hwEthARPShowIfindex,hwEthARPShowVid,hwEthARPIpAddr} ::= { hwEthARPShowWithInterAndVidTable 1 } HwEthARPShowWithInterAndVidEntry ::= SEQUENCE { hwEthARPShowIfindex InterfaceIndex , hwEthARPShowVid Integer32 , hwEthARPIpAddr IpAddress , hwEthARPMacAddr PhysAddress } hwEthARPShowIfindex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface learns ARP packets." ::= { hwEthARPShowWithInterAndVidEntry 1 } hwEthARPShowVid OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN receives the APR packets." ::= { hwEthARPShowWithInterAndVidEntry 2 } hwEthARPIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ip of ARP ." ::= { hwEthARPShowWithInterAndVidEntry 3 } hwEthARPMacAddr OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC of ARP ." ::= { hwEthARPShowWithInterAndVidEntry 4 } -- disp arp and statics with interface and vlanid end --- arp limit config definition begin hwEthARPLimitTable OBJECT-TYPE SYNTAX SEQUENCE OF HwEthARPLimitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure the ARP limit based on interfaces or VLANs." ::= { hwEthernetARPObjects 13 } hwEthARPLimitEntry OBJECT-TYPE SYNTAX HwEthARPLimitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure the ARP limit based on interfaces or VLANs." INDEX {hwEthARPLimitCfgIfindex,hwEthARPVLANFirst,hwEthARPVLANLast} ::= { hwEthARPLimitTable 1 } HwEthARPLimitEntry ::= SEQUENCE { hwEthARPLimitCfgIfindex InterfaceIndex , hwEthARPVLANFirst Integer32 , hwEthARPVLANLast Integer32 , hwEthARPLimitNum Integer32 , hwEthARPLimitRowStatus RowStatus } hwEthARPLimitCfgIfindex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface on which the limit is configured." ::= { hwEthARPLimitEntry 1 } hwEthARPVLANFirst OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN to which Layer 2 interfaces belong." ::= { hwEthARPLimitEntry 2 } hwEthARPVLANLast OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN to which Layer 2 interfaces belong." ::= { hwEthARPLimitEntry 3 } hwEthARPLimitNum OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the ARP limit." ::= { hwEthARPLimitEntry 4 } hwEthARPLimitRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The running status of the ARP limit table." ::= { hwEthARPLimitEntry 5 } hwEthernetARPLearningStrictInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF HwEthernetARPLearningStrictInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure the ARP Learning Strict based on interfaces." ::= { hwEthernetARPObjects 14 } hwEthernetARPLearningStrictInterfaceEntry OBJECT-TYPE SYNTAX HwEthernetARPLearningStrictInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure the ARP Learning Strict based on interfaces." INDEX {hwEthernetARPLearningStrictIfindex} ::= { hwEthernetARPLearningStrictInterfaceTable 1 } HwEthernetARPLearningStrictInterfaceEntry ::= SEQUENCE { hwEthernetARPLearningStrictIfindex InterfaceIndex , hwEthernetARPLearningStrictState INTEGER , hwEthernetARPLearningStrictRowStatus RowStatus } hwEthernetARPLearningStrictIfindex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface on which the ARP Learning Strict be configured." ::= { hwEthernetARPLearningStrictInterfaceEntry 1 } hwEthernetARPLearningStrictState OBJECT-TYPE SYNTAX INTEGER { forceEnable(1), forceDisable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The ARP Learning Strict State be configured." ::= { hwEthernetARPLearningStrictInterfaceEntry 2 } hwEthernetARPLearningStrictRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The running status of the ARP Learning Strict table." ::= { hwEthernetARPLearningStrictInterfaceEntry 3 } -- --- arp process-interface-status begin hwArpLinkInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF HwArpLinkInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Config ARP link interface: hwArpLinkIfIndex: interface index hwArpLinkPeerIp: peer ip hwArpLinkDetectTime: detection time between two ARP packects hwArpLinkDetectTimes: detection times of ARP packects hwArpLinkDetectMode: detection mode hwArpLinkStatus: interface status hwArpLinkRowStatus: the row status of this row." ::= { hwEthernetARPObjects 15 } hwArpLinkInterfaceEntry OBJECT-TYPE SYNTAX HwArpLinkInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Config ARP link interface: hwArpLinkIfIndex: interface index hwArpLinkPeerIp: peer ip hwArpLinkDetectTime: detection time between two ARP packects hwArpLinkDetectTimes: detection times of ARP packects hwArpLinkDetectMode: detection mode hwArpLinkStatus: interface status hwArpLinkRowStatus: the row status of this row." INDEX { hwArpLinkIfIndex } ::= { hwArpLinkInterfaceTable 1 } HwArpLinkInterfaceEntry ::= SEQUENCE { hwArpLinkIfIndex Integer32, hwArpLinkPeerIp InetAddressIPv4, hwArpLinkDetectTime Integer32, hwArpLinkDetectTimes Integer32, hwArpLinkDetectMode INTEGER, hwArpLinkStatus INTEGER, hwArpLinkRowStatus RowStatus } hwArpLinkIfIndex OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of interface which is configed to be linked by ARP, the zero value is invalid." ::= { hwArpLinkInterfaceEntry 1 } hwArpLinkPeerIp OBJECT-TYPE SYNTAX InetAddressIPv4 MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address which ARP detecting packet will send to. When creating a new record or modifying the peer ip address, a check for this ip will be generated. If it is invalid, that operation will be not applicable." ::= { hwArpLinkInterfaceEntry 11 } hwArpLinkDetectTime OBJECT-TYPE SYNTAX Integer32(200..10000) MAX-ACCESS read-create STATUS current DESCRIPTION "The interval time for two ARP packets are sent to detect the peer's interface status, this time unit is millisecond. The valid range is from 200 to 10000, and the default value is 1000." DEFVAL { 1000 } ::= { hwArpLinkInterfaceEntry 12 } hwArpLinkDetectTimes OBJECT-TYPE SYNTAX Integer32(1..10) MAX-ACCESS read-create STATUS current DESCRIPTION "After the max detecting times for ARP packet is sent to, and there is not any response, the sender can judge the peer interface is down. Then, setting the status of current interface down. The valid range is from 1 to 10, and the default value is 3." DEFVAL { 3 } ::= { hwArpLinkInterfaceEntry 13 } hwArpLinkDetectMode OBJECT-TYPE SYNTAX INTEGER { loose(1), strict(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The detecting mode for ARP linking interface. If the mode is loose and its status is down, current interface just wait to receive the ARP packet, when received peer's arp packet, current interface status is up. If mode is strict, current interface sends ARP detecting packet to peer actively, and shutdown itself, if these is no response from peer after the retry times. If status of current interface is up, it will send ARP packet to detect the status of peer actively, whenever the mode is loose or strict." DEFVAL { strict } ::= { hwArpLinkInterfaceEntry 14 } hwArpLinkStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of interface linked by ARP. This value can not be set anytime." ::= { hwArpLinkInterfaceEntry 15 } hwArpLinkRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of ARP link table. The detail can be found from the rowstatus definition." ::= { hwArpLinkInterfaceEntry 51} -- ================================================================= -- The Table of ARP Entry Expire control table (use detect mode now) -- ================================================================= hwArpEntryExpireControlTable OBJECT-TYPE SYNTAX SEQUENCE OF HwArpEntryExpireControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object identifies the parameters of ARP aging detection, such as ARP detection mode, start time, detection times. At present, only the ARP detection mode and ARP fake-entry expire time can be configured. hwArpEntryExpireIfIndex: indicates the interface index. hwArpEntryExpireDetectMode: indicates the unicast or broadcast ARP aging detection mode. hwArpEntryExpireFakeTime: indicates the expire time of ARP fake entry." ::= { hwEthernetARPObjects 16 } hwArpEntryExpireControlEntry OBJECT-TYPE SYNTAX HwArpEntryExpireControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object identifies the parameters of ARP aging detection, such as ARP detection mode, start time, detection times. At present, only the ARP detection mode and ARP fake-entry expire time can be configured. hwArpEntryExpireIfIndex: indicates the interface index. hwArpEntryExpireDetectMode: indicates the unicast or broadcast ARP aging detection mode. hwArpEntryExpireFakeTime: indicates the expire time of ARP fake entry." INDEX { hwArpEntryExpireIfIndex } ::= { hwArpEntryExpireControlTable 1 } HwArpEntryExpireControlEntry ::= SEQUENCE { hwArpEntryExpireIfIndex InterfaceIndex, hwArpEntryExpireDetectMode INTEGER, hwArpEntryExpireFakeTime Integer32 } hwArpEntryExpireIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the index of an interface on which ARP aging detection parameters are set. The value 0 is invalid." ::= { hwArpEntryExpireControlEntry 1 } hwArpEntryExpireDetectMode OBJECT-TYPE SYNTAX INTEGER { broadcast(1), unicast(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the ARP aging detection mode. In unicast ARP detection mode, unicast ARP detection packets are sent before ARP ages. In broadcast ARP detection mode, broadcast ARP detection packets are sent before ARP ages. By default, the system adopts the broadcast ARP detection mode." DEFVAL { broadcast } ::= { hwArpEntryExpireControlEntry 2 } hwArpEntryExpireFakeTime OBJECT-TYPE SYNTAX Integer32(1..36000) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the expire time of ARP fake entry. The valid range is from 1 to 36000, and the default value is 1." DEFVAL { 1 } ::= { hwArpEntryExpireControlEntry 3 } -- End of hwArpEntryExpireControlTable -- ================================================================= -- The Table of ARP Dynamic Entry table -- ================================================================= hwArpDynTable OBJECT-TYPE SYNTAX SEQUENCE OF HwArpDynEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object identifies the items of ARP table, such as IP address of ARP items, VPN instance name of ARP items, MAC address of ARP items, VLAN information of ARP items, expire time of ARP items. hwArpDynEntryIfIndex: indicates the interface index. hwArpDynEntryIpAdd: indicates the IP address. hwArpDynEntryVrf: indicates the VPN instance name. hwArpDynEntryMacAdd: indicates the MAC address. hwArpDynEntryVlanId: indicates the VLAN of ARP item. hwArpDynEntryCeVlanId: indicates the CE VLAN of ARP item. hwArpDynEntryOutIfIndex: indicates the forwarding interface. hwArpDynEntryExpireTime: indicates the expire time of ARP item." ::= { hwEthernetARPObjects 17 } hwArpDynEntry OBJECT-TYPE SYNTAX HwArpDynEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object identifies the items of dynamic ARP table, such as IP address of ARP items, VPN instance name of ARP items, MAC address of ARP items, VLAN information of ARP items, expire time of ARP items. hwArpDynEntryIfIndex: indicates the interface index. hwArpDynEntryIpAdd: indicates the IP address. hwArpDynEntryVrf: indicates the VPN instance name. hwArpDynEntryMacAdd: indicates the MAC address. hwArpDynEntryVlanId: indicates the VLAN of ARP item. hwArpDynEntryCeVlanId: indicates the CE VLAN of ARP item. hwArpDynEntryOutIfIndex: indicates the forwarding interface. hwArpDynEntryExpireTime: indicates the expire time of ARP item." INDEX { hwArpDynIfIndex, hwArpDynIpAdd, hwArpDynVrf } ::= { hwArpDynTable 1 } HwArpDynEntry ::= SEQUENCE { hwArpDynIfIndex Integer32, hwArpDynIpAdd InetAddressIPv4, hwArpDynVrf OCTET STRING, hwArpDynMacAdd PhysAddress, hwArpDynVlanId Integer32, hwArpDynCeVlanId Integer32, hwArpDynOutIfIndex InterfaceIndex, hwArpDynExpireTime Integer32 } hwArpDynIfIndex OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The logic forwarding interface. The value 0 is invalid." ::= { hwArpDynEntry 1 } hwArpDynIpAdd OBJECT-TYPE SYNTAX InetAddressIPv4 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the IP address of an ARP items. The value 0 is invalid." ::= { hwArpDynEntry 2 } hwArpDynVrf OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the VPN name of an ARP items." ::= { hwArpDynEntry 3 } hwArpDynMacAdd OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the MAC address of an ARP items." ::= { hwArpDynEntry 11 } hwArpDynVlanId OBJECT-TYPE SYNTAX Integer32(0..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the VLAN of an ARP items." ::= { hwArpDynEntry 12 } hwArpDynCeVlanId OBJECT-TYPE SYNTAX Integer32(0..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the CE VLAN of an ARP items." ::= { hwArpDynEntry 13 } hwArpDynOutIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The physical forwarding interface." ::= { hwArpDynEntry 14 } hwArpDynExpireTime OBJECT-TYPE SYNTAX Integer32(0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the expire time of an ARP items." ::= { hwArpDynEntry 15 } -- End of hwArpDynEntryTable -- ================================================================= -- The Table of ARP Static Entry table -- ================================================================= hwArpCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HwArpCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object identifies the items of static ARP table, such as IP address of ARP items, VPN instance name of ARP items, MAC address of ARP items, VLAN information of ARP items. hwArpDynEntryIpAdd: indicates the IP address. hwArpDynEntryVrf: indicates the VPN instance name. hwArpDynEntryMacAdd: indicates the MAC address. hwArpDynEntryVlanId: indicates the VLAN of ARP item. hwArpDynEntryCeVlanId: indicates the CE VLAN of ARP item. hwArpDynEntryOutIfIndex: indicates the forwarding interface." ::= { hwEthernetARPObjects 18 } hwArpCfgEntry OBJECT-TYPE SYNTAX HwArpCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object identifies the items of static ARP table, such as IP address of ARP items, VPN instance name of ARP items, MAC address of ARP items, VLAN information of ARP items. hwArpDynEntryIpAdd: indicates the IP address. hwArpDynEntryVrf: indicates the VPN instance name. hwArpDynEntryMacAdd: indicates the MAC address. hwArpDynEntryVlanId: indicates the VLAN of ARP item. hwArpDynEntryCeVlanId: indicates the CE VLAN of ARP item. hwArpDynEntryOutIfIndex: indicates the forwarding interface." INDEX { hwArpCfgIpAdd, hwArpCfgVrf } ::= { hwArpCfgTable 1 } HwArpCfgEntry ::= SEQUENCE { hwArpCfgIpAdd InetAddressIPv4, hwArpCfgMacAdd MacAddress, hwArpCfgVrf OCTET STRING, hwArpCfgVlanId Integer32, hwArpCfgCeVlanId Integer32, hwArpCfgOutIfIndex Integer32, hwArpCfgRowstatus RowStatus } hwArpCfgIpAdd OBJECT-TYPE SYNTAX InetAddressIPv4 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the IP address of an ARP items. The value 0 is invalid." ::= { hwArpCfgEntry 1 } hwArpCfgMacAdd OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the MAC address of an ARP items." ::= { hwArpCfgEntry 2 } hwArpCfgVrf OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the VPN name of an ARP items." ::= { hwArpCfgEntry 3 } hwArpCfgVlanId OBJECT-TYPE SYNTAX Integer32 (0..4096) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the VLAN of an ARP items." ::= { hwArpCfgEntry 11 } hwArpCfgCeVlanId OBJECT-TYPE SYNTAX Integer32 (0..4096) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the CE VLAN of an ARP items." ::= { hwArpCfgEntry 12 } hwArpCfgOutIfIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "The physical forwarding interface." ::= { hwArpCfgEntry 13 } hwArpCfgRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the row status of an static ARP item." ::= { hwArpCfgEntry 51 } -- End of hwArpCfgTable hwEthernetARPAntiAttackStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), fix-mac(1), fix-all(2), send-ack(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the status of the ARP anti-attack." ::= { hwEthernetARPObjects 19 } hwEthernetARPAntiGateWayConflict OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of the ARP anti-gateway-conflict." ::= { hwEthernetARPObjects 20 } hwEthernetARPLogAndTrapTimer OBJECT-TYPE SYNTAX Integer32(0..1200) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the interval of log and trap. The default value is 0, which means no log and trap." ::= { hwEthernetARPObjects 21 } hwEthernetARPAntiAttackObjects OBJECT IDENTIFIER ::= { hwEthernetARPObjects 22 } hwEthernetARPAntiAttackIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the IP address which is attacked." ::= { hwEthernetARPAntiAttackObjects 1 } hwEthernetARPAntiAttackMacAddress OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the MAC address which is attacked." ::= { hwEthernetARPAntiAttackObjects 2 } hwEthernetARPAntiAttackVlanId OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the VLAN ID which is attacked." ::= { hwEthernetARPAntiAttackObjects 3 } hwEthernetARPAntiAttackIfName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the interface name which is attacked." ::= { hwEthernetARPAntiAttackObjects 4 } hwArpEntryGatewayConflictTable OBJECT-TYPE SYNTAX SEQUENCE OF HwArpEntryGatewayConflictEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object identifies the information about the source of the attack. It contains IP address, MAC, VLAN ID and interface." ::= { hwEthernetARPObjects 23 } hwArpEntryGatewayConflictEntry OBJECT-TYPE SYNTAX HwArpEntryGatewayConflictEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object identifies the information about the source of the attack. It contains IP address, MAC, VLAN ID and interface." INDEX { hwEthernetARPAntiGatewayConflictIndex } ::= { hwArpEntryGatewayConflictTable 1 } HwArpEntryGatewayConflictEntry ::= SEQUENCE { hwEthernetARPAntiGatewayConflictIndex Integer32, hwEthernetARPAntiGatewayConflictIpAddress IpAddress, hwEthernetARPAntiGatewayConflictMacAddress OCTET STRING, hwEthernetARPAntiGatewayConflictVlanId Integer32, hwEthernetARPAntiGatewayConflictIfName OCTET STRING } hwEthernetARPAntiGatewayConflictIndex OBJECT-TYPE SYNTAX Integer32(1..100) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the gateway conflict entries." ::= { hwArpEntryGatewayConflictEntry 1 } hwEthernetARPAntiGatewayConflictIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the IP address is attacked." ::= { hwArpEntryGatewayConflictEntry 2 } hwEthernetARPAntiGatewayConflictMacAddress OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the MAC of the attack-source." ::= { hwArpEntryGatewayConflictEntry 3 } hwEthernetARPAntiGatewayConflictVlanId OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the VLAN ID of the attack-source." ::= { hwArpEntryGatewayConflictEntry 4 } hwEthernetARPAntiGatewayConflictIfName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the interface of the attack-source." ::= { hwArpEntryGatewayConflictEntry 5 } hwArpSecValidateTable OBJECT-TYPE SYNTAX SEQUENCE OF HwArpSecValidateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains the arp validation information on the interface." ::= { hwEthernetARPObjects 24 } hwArpSecValidateEntry OBJECT-TYPE SYNTAX HwArpSecValidateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry contains the arp validation information on the interface." INDEX { hwArpSecValidateIfIndex } ::= { hwArpSecValidateTable 1 } HwArpSecValidateEntry ::= SEQUENCE { hwArpSecValidateIfIndex InterfaceIndex, hwArpSecValidateSmac EnabledStatus, hwArpSecValidateDmac EnabledStatus, hwArpSecValidateRowStatus RowStatus } hwArpSecValidateIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the arp validation entries." ::= { hwArpSecValidateEntry 1 } hwArpSecValidateSmac OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "indicates check the source-mac of arp packet head and the ethernet packet head." DEFVAL { disabled } ::= { hwArpSecValidateEntry 2 } hwArpSecValidateDmac OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "indicates check the destination-mac of arp packet head and the ethernet packet head." DEFVAL { disabled } ::= { hwArpSecValidateEntry 3 } hwArpSecValidateRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the status of the arp validation table." ::= { hwArpSecValidateEntry 51 } -- BEGIN: ARP GRATIUITOUS SEND ENABLE hwARPGratuitousSendTable OBJECT-TYPE SYNTAX SEQUENCE OF HwARPGratuitousSendEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains the arp validation information on the interface." ::= { hwEthernetARPObjects 25 } hwARPGratuitousSendEntry OBJECT-TYPE SYNTAX HwARPGratuitousSendEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry contains the gratuitous arp send information on the vlanif interface." INDEX { hwARPGratuitousSendIfIndex } ::= { hwARPGratuitousSendTable 1 } HwARPGratuitousSendEntry ::= SEQUENCE { hwARPGratuitousSendIfIndex InterfaceIndex, hwARPGratuitousSendEnable EnabledStatus, hwARPArpGratuitousSendInterval Integer32 } hwARPGratuitousSendIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifindex of the ARP gratuitous send configed." ::= { hwARPGratuitousSendEntry 1 } hwARPGratuitousSendEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the status of the gratuitous-arp send." ::= { hwARPGratuitousSendEntry 2 } hwARPArpGratuitousSendInterval OBJECT-TYPE SYNTAX Integer32 (1..86400) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the interval of the gratuitous-arp send. The value ranges from 1 to 86400, in second, with default value 90." ::= { hwARPGratuitousSendEntry 3 } -- END : ARP GRATIUITOUS SEND ENABLE hwEthernetARPThresholdObjects OBJECT IDENTIFIER ::= { hwEthernetARPObjects 26 } hwEthernetARPThresholdValue OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the threshold of the alarm generated." ::= { hwEthernetARPThresholdObjects 1 } hwEthernetARPThresholdDynamicNumber OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the number of dynamic ARP entries." ::= { hwEthernetARPThresholdObjects 2 } hwEthernetARPThresholdStaticNumber OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the number of static ARP entries." ::= { hwEthernetARPThresholdObjects 3 } -- ================================================================= -- 27th The Node of ConflictDetect -- ================================================================= hwEthernetARPConflictDetect OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the ARP conflict detect. In this way, router can detect ARP entries conflict." ::= { hwEthernetARPObjects 27 } -- ================================================================= -- 28th The Node of IP Conflict -- ================================================================= hwETHARPIPConflictObjects OBJECT IDENTIFIER ::= { hwEthernetARPObjects 28 } hwEthernetARPIPConflictIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the conflict IP address." ::= { hwETHARPIPConflictObjects 1 } hwEthernetARPIPConflictLocalInterfaceName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the interface before conflict." ::= { hwETHARPIPConflictObjects 2 } hwEthernetARPIPConflictLocalMAC OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the MAC before conflict." ::= { hwETHARPIPConflictObjects 3} hwEthernetARPIPConflictLocalVLAN OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the VLAN before conflict." ::= { hwETHARPIPConflictObjects 4} hwEthernetARPIPConflictLocalCEVLAN OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the CE VLAN before conflict." ::= { hwETHARPIPConflictObjects 5} hwEthernetARPIPConflictReceiveInterfaceName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the conflict interface." ::= { hwETHARPIPConflictObjects 6 } hwEthernetARPIPConflictReceiveMAC OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the conflict MAC of the received packet." ::= { hwETHARPIPConflictObjects 7 } hwEthernetARPIPConflictReceiveVLAN OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the VLAN of the received packet." ::= { hwETHARPIPConflictObjects 8} hwEthernetARPIPConflictReceiveCEVLAN OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the CE VLAN of the received packet." ::= { hwETHARPIPConflictObjects 9} hwEthernetARPIPConflictType OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the conflict type." ::= { hwETHARPIPConflictObjects 10 } hwEthernetARPReceiveDstIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the destination IP address of the received packet." ::= { hwETHARPIPConflictObjects 11 } hwEthernetARPReceiveDstMAC OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the destination MAC of the received packet." ::= { hwETHARPIPConflictObjects 12 } -- Notifications(trap) Definitions -- hwEthernetARPNotifications OBJECT IDENTIFIER ::= { hwEthernetARPMIB 2 } hwEthernetARPSpeedLimitAlarm NOTIFICATION-TYPE OBJECTS { hwEthernetARPSpeedLimitIfIndex,hwEthernetARPSpeedLimitConfigured,hwEthernetARPSpeedLimitCurrent,hwEthernetARPSpeedLimitType,hwEthernetARPSpeedLimitSrcIPAddr,hwEthernetARPSpeedLimitDstIPAddr,hwEthernetARPSpeedLimitVPNinstance} STATUS current DESCRIPTION "Trap information about ARP speed limit: interface index, current configured limit number, current received number, limit type (ARP, ARP-MISS), source IP address, destination IP address, VPN instance." ::= { hwEthernetARPNotifications 1 } hwEthernetARPAntiAttackAlarm NOTIFICATION-TYPE OBJECTS { hwEthernetARPAntiAttackIpAddress,hwEthernetARPAntiAttackMacAddress,hwEthernetARPAntiAttackVlanId,hwEthernetARPAntiAttackIfName} STATUS current DESCRIPTION "Trap information about ARP anti-attack: IP address, MAC, VLAN id, interface index." ::= { hwEthernetARPNotifications 2 } hwEthernetARPAntiGatewayConflictAlarm NOTIFICATION-TYPE OBJECTS { hwEthernetARPAntiGatewayConflictIpAddress,hwEthernetARPAntiGatewayConflictMacAddress,hwEthernetARPAntiGatewayConflictVlanId,hwEthernetARPAntiGatewayConflictIfName} STATUS current DESCRIPTION "Trap information about ARP anti-attack: IP address, MAC, VLAN ID, interface index." ::= { hwEthernetARPNotifications 3 } hwEthernetARPThresholdExceedAlarm NOTIFICATION-TYPE OBJECTS { entPhysicalName,hwEthernetARPThresholdValue,hwEthernetARPThresholdDynamicNumber,hwEthernetARPThresholdStaticNumber } STATUS current DESCRIPTION "Trap information about ARP exceed threshold: slot, threshold, number of dynamic ARP, number of static ARP." ::= { hwEthernetARPNotifications 4 } hwEthernetARPThresholdResumeAlarm NOTIFICATION-TYPE OBJECTS { entPhysicalName,hwEthernetARPThresholdValue,hwEthernetARPThresholdDynamicNumber,hwEthernetARPThresholdStaticNumber } STATUS current DESCRIPTION "Trap information about ARP resume threshold: slot, threshold, number of dynamic ARP, number of static ARP." ::= { hwEthernetARPNotifications 5 } hwEthernetARPIPConflictEvent NOTIFICATION-TYPE OBJECTS { hwEthernetARPIPConflictIPAddress,hwEthernetARPIPConflictLocalInterfaceName,hwEthernetARPIPConflictLocalMAC,hwEthernetARPIPConflictLocalVLAN,hwEthernetARPIPConflictLocalCEVLAN,hwEthernetARPIPConflictReceiveInterfaceName,hwEthernetARPIPConflictReceiveMAC,hwEthernetARPIPConflictReceiveVLAN,hwEthernetARPIPConflictReceiveCEVLAN,hwEthernetARPIPConflictType } STATUS current DESCRIPTION "Trap information about ARP IP conflict." ::= { hwEthernetARPNotifications 6 } hwEthernetARPMACIPConflict NOTIFICATION-TYPE OBJECTS { hwEthernetARPIPConflictLocalInterfaceName,hwEthernetARPIPConflictReceiveMAC,hwEthernetARPIPConflictIPAddress,hwEthernetARPReceiveDstMAC,hwEthernetARPReceiveDstIPAddr,hwEthernetARPIPConflictReceiveVLAN,hwEthernetARPIPConflictReceiveCEVLAN,hwEthernetARPIPConflictReceiveInterfaceName} STATUS current DESCRIPTION "Trap information about MAC and IP address conflict: conflict interface name, conflict MAC address, conflict IP address, and the received packet's destination MAC address, destination IP address, vlan, ce-vlan, receive interface." ::= { hwEthernetARPNotifications 7 } hwEthernetARPMACIPConflictResolved NOTIFICATION-TYPE OBJECTS { hwEthernetARPIPConflictLocalInterfaceName,hwEthernetARPIPConflictReceiveMAC,hwEthernetARPIPConflictIPAddress} STATUS current DESCRIPTION "Trap information about MAC and IP address conflict resolved: conflict interface name, conflict MAC address, conflict IP address." ::= { hwEthernetARPNotifications 8 } -- -- Conformance information -- hwEthernetARPConformance OBJECT IDENTIFIER ::= { hwEthernetARPMIB 3 } hwEthernetARPGroups OBJECT IDENTIFIER ::= { hwEthernetARPConformance 1 } hwEthernetARPCompliances OBJECT IDENTIFIER ::= { hwEthernetARPConformance 2 } hwEthernetARPStaticsGroup OBJECT-GROUP OBJECTS { --hwEthernetARPStaticsSlot , hwEthernetARPStaticsLearnTotal , hwEthernetARPDropForLimit , hwEthernetARPDropForARPSuppress , hwEthernetARPDropForARPMissSuppress , hwEthernetARPDropForOther , hwEthernetARPMissDropForOther , hwEthernetARPRcvNum , hwEthernetARPMissRcvNum, hwEthernetARPStaticsOperation , hwEthernetARPProxySupressNum } STATUS current DESCRIPTION "A table contains the statistics about Ethernet ARP. The statistics include number of received ARP packets, number of received ARP-MISS packets, number of learned ARP packets, number of discarded ARP packets caused by the ARP limit, the number of discarded ARP-MISS packets caused by the limit and the number of discarded ARP and ARP-MISS packets caused by other reasons." ::= { hwEthernetARPGroups 1 } hwEthernetARPSpeedLimitGroup OBJECT-GROUP OBJECTS { hwEthernetARPLimitSpeedValue } STATUS current DESCRIPTION "A Group table ,which contains the configuration information of Ethernet ARP Speed limit slot. The information includes type, speedvalue, sourceip and destip." ::= { hwEthernetARPGroups 2 } hwEthARPShowWithInterAndVidGroup OBJECT-GROUP OBJECTS { hwEthARPMacAddr } STATUS current DESCRIPTION "Display the ARP table based on interface number or interface number and VLAN ID." ::= { hwEthernetARPGroups 3 } hwEthARPLimitGroup OBJECT-GROUP OBJECTS { hwEthARPLimitNum, hwEthARPLimitRowStatus --hwEthARPLimitVidFirst , --hwEthARPLimitVidLast } STATUS current DESCRIPTION "config the arp limit on the interface with vlanid,limit num." ::= { hwEthernetARPGroups 4 } --hwEthARPLimitGroup OBJECT-GROUP -- OBJECTS { --hwEthARPLimitShowNum , --hwEthARPLimitShowVid , -- hwEthARPLimitShowIfindex -- } --STATUS current -- DESCRIPTION -- "Display the limit based on interface number and VLAN ID." --::= { hwEthernetARPGroups 5 } hwEthernetARPBaseGroup OBJECT-GROUP OBJECTS { hwEthernetARPAntiAttackLog, hwEthernetARPLearningStrict, hwEthernetARPSpeedLimitIfIndex, hwEthernetARPSpeedLimitConfigured, hwEthernetARPSpeedLimitCurrent, hwEthernetARPSpeedLimitType, hwEthernetARPSpeedLimitSrcIPAddr, hwEthernetARPSpeedLimitDstIPAddr, hwEthernetARPSpeedLimitVPNinstance, hwArpSecValidateSmac, hwArpSecValidateDmac, hwArpSecValidateRowStatus } STATUS current DESCRIPTION "A collection of objects providing configuration or display." ::= { hwEthernetARPGroups 5 } hwEthernetARPNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS{ hwEthernetARPSpeedLimitAlarm, hwEthernetARPAntiAttackAlarm, hwEthernetARPAntiGatewayConflictAlarm, hwEthernetARPThresholdExceedAlarm, hwEthernetARPThresholdResumeAlarm, hwEthernetARPIPConflictEvent, hwEthernetARPMACIPConflict, hwEthernetARPMACIPConflictResolved} STATUS current DESCRIPTION "notification Group." ::= { hwEthernetARPGroups 6 } hwEthernetARPLearningStrictInterfaceGroup OBJECT-GROUP OBJECTS{ hwEthernetARPLearningStrictState, hwEthernetARPLearningStrictRowStatus } STATUS current DESCRIPTION "ARP Learning Strict Interface Group." ::= { hwEthernetARPGroups 7 } hwArpLinkInferaceGroup OBJECT-GROUP OBJECTS { hwArpLinkPeerIp, hwArpLinkDetectTime, hwArpLinkDetectTimes, hwArpLinkDetectMode, hwArpLinkStatus, hwArpLinkRowStatus } STATUS current DESCRIPTION "A collection of objects providing configuration of ARP linking interface." ::= { hwEthernetARPGroups 8 } hwArpEntryExpireControlGroup OBJECT-GROUP OBJECTS { hwArpEntryExpireDetectMode, hwArpEntryExpireFakeTime } STATUS current DESCRIPTION "A collection of objects providing configuration of ARP Expire Parameter." ::= { hwEthernetARPGroups 9 } hwArpAntiAttackGroup OBJECT-GROUP OBJECTS { hwEthernetARPAntiAttackStatus, hwEthernetARPAntiGateWayConflict, hwEthernetARPLogAndTrapTimer, hwEthernetARPAntiAttackIpAddress, hwEthernetARPAntiAttackMacAddress, hwEthernetARPAntiAttackVlanId, hwEthernetARPAntiAttackIfName, hwEthernetARPAntiGatewayConflictIpAddress, hwEthernetARPAntiGatewayConflictMacAddress, hwEthernetARPAntiGatewayConflictVlanId, hwEthernetARPAntiGatewayConflictIfName, hwArpDynMacAdd, hwArpDynVlanId, hwArpDynCeVlanId, hwArpDynOutIfIndex, hwArpDynExpireTime, hwArpCfgVlanId, hwArpCfgCeVlanId, hwArpCfgOutIfIndex, hwArpCfgRowstatus } STATUS current DESCRIPTION "A collection of objects providing lockuping ARP anti attack." ::= { hwEthernetARPGroups 10 } hwEthernetARPThresholdGroup OBJECT-GROUP OBJECTS { hwEthernetARPThresholdValue, hwEthernetARPThresholdDynamicNumber, hwEthernetARPThresholdStaticNumber } STATUS current DESCRIPTION "A collection of objects for ARP threshold alarm." ::= { hwEthernetARPGroups 11 } hwETHARPIPConflictGroup OBJECT-GROUP OBJECTS { hwEthernetARPIPConflictIPAddress, hwEthernetARPIPConflictLocalInterfaceName, hwEthernetARPIPConflictLocalMAC, hwEthernetARPIPConflictLocalVLAN, hwEthernetARPIPConflictLocalCEVLAN, hwEthernetARPIPConflictReceiveInterfaceName, hwEthernetARPIPConflictReceiveMAC, hwEthernetARPIPConflictReceiveVLAN, hwEthernetARPIPConflictReceiveCEVLAN, hwEthernetARPIPConflictType, hwEthernetARPReceiveDstIPAddr, hwEthernetARPReceiveDstMAC } STATUS current DESCRIPTION "A collection of objects for ARP conflict trap." ::= { hwEthernetARPGroups 12 } hwEthernetARPCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for arp Speedlimit and arp limit." MODULE MANDATORY-GROUPS { hwEthernetARPBaseGroup, hwEthernetARPLearningStrictInterfaceGroup, hwArpEntryExpireControlGroup, hwArpAntiAttackGroup } ::= { hwEthernetARPCompliances 1 } -- ------------------------------------------------------------- -- units of conformance -- ------------------------------------------------------------- -- ------------------------------------------------------------- -- units of conformance -- ------------------------------------------------------------- END