LAG-MIB DEFINITIONS ::= BEGIN
-- -------------------------------------------------------------
-- IEEE 802.3ad MIB
-- -------------------------------------------------------------
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Counter32, TimeTicks, BITS
FROM SNMPv2-SMI
DisplayString, MacAddress, TEXTUAL-CONVENTION, TruthValue
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
InterfaceIndex
FROM IF-MIB
PortList
FROM Q-BRIDGE-MIB
;

lagMIB MODULE-IDENTITY
LAST-UPDATED "9911220000Z"
ORGANIZATION "IEEE 802.3ad Working Group"
CONTACT-INFO
" stds-802-3-trunking@majordomo.ieee.org"
DESCRIPTION
"The Link Aggregation module for managing IEEE 802.3ad."
::= { iso(1) member-body(2) us(840) ieee802dot3(10006) snmpmibs(300) linkagg(43) }
lagMIBObjects OBJECT IDENTIFIER ::= { lagMIB 1 }
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
LacpKey ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Actor or Partner Key value."
SYNTAX INTEGER (0..65535)
LacpState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Actor and Partner State values from the LACPDU."
SYNTAX BITS {
lacpActivity(0),
lacpTimeout(1),
aggregation(2),
synchronization(3),
collecting(4),
distributing(5),
defaulted(6),
expired(7)
}
ChurnState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The state of the Churn Detection machine."
SYNTAX INTEGER {
noChurn(1),
churn(2),
churnMonitor(3)
}
-- -------------------------------------------------------------
-- -------------------------------------------------------------
-- groups in the LAG MIB
-- -------------------------------------------------------------
dot3adAgg OBJECT IDENTIFIER ::= { lagMIBObjects 1 }
dot3adAggPort OBJECT IDENTIFIER ::= { lagMIBObjects 2 }
-- -------------------------------------------------------------
-- -------------------------------------------------------------
-- The Tables Last Changed Object
-- -------------------------------------------------------------
dot3adTablesLastChanged OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the time of the
most recent change to the dot3adAggTable,
dot3adAggPortListTable, or
dot3adAggPortTable."
::= { lagMIBObjects 3 }
-- -------------------------------------------------------------
-- The Aggregator Configuration Table
-- -------------------------------------------------------------
dot3adAggTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot3adAggEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about every
Aggregator that is associated with this System."
REFERENCE
"IEEE 802.3 Subclause 30.7.1"
::= { dot3adAgg 1 }
dot3adAggEntry OBJECT-TYPE
SYNTAX Dot3adAggEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the Aggregator parameters. This is indexed
by the ifIndex of the Aggregator."
INDEX { dot3adAggIndex }
::= { dot3adAggTable 1 }
Dot3adAggEntry ::=
SEQUENCE {
dot3adAggIndex
InterfaceIndex,
dot3adAggMACAddress
MacAddress,
dot3adAggActorSystemPriority
INTEGER,
dot3adAggActorSystemID
MacAddress,
dot3adAggAggregateOrIndividual
TruthValue,
dot3adAggActorAdminKey
LacpKey,
dot3adAggActorOperKey
LacpKey,
dot3adAggPartnerSystemID
MacAddress,
dot3adAggPartnerSystemPriority
INTEGER,
dot3adAggPartnerOperKey
LacpKey,
dot3adAggCollectorMaxDelay
INTEGER
}
dot3adAggIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier allocated to this Aggregator by the local System.
This attribute identifies an Aggregator instance among the subordinate
managed objects of the containing object. This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.1.1.1"
::= { dot3adAggEntry 1 }
dot3adAggMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 6-octet read-only value carrying the individual
MAC address assigned to the Aggregator."
REFERENCE
"IEEE 802.3 Subclause 30.7.1.1.9"
::= { dot3adAggEntry 2 }
dot3adAggActorSystemPriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A 2-octet read-write value indicating the priority value
associated with the Actor's System ID."
REFERENCE
"IEEE 802.3 Subclause 30.7.1.1.5"
::= { dot3adAggEntry 3 }
dot3adAggActorSystemID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 6-octet read-write MAC address value used as a unique
identifier for the System that contains this Aggregator.
NOTE-From the perspective of the Link Aggregation mechanisms described in Clause 43,
only a single combination of Actor's System ID and System Priority are considered, and no
distinction is made between the values of these parameters for an Aggregator and the port(s) that
are associated with it; i.e., the protocol is described in terms of the operation of aggregation within
a single System. However, the managed objects provided for the Aggregator and the port both
allow management of these parameters. The result of this is to permit a single piece of equipment
to be configured by management to contain more than one System from the point of view of the
operation of Link Aggregation. This may be of particular use in the configuration of equipment
that has limited aggregation capability (see 43.6)."
REFERENCE
"IEEE 802.3 Subclause 30.7.1.1.4"
::= { dot3adAggEntry 4 }
dot3adAggAggregateOrIndividual OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only Boolean value indicating whether the
Aggregator represents an Aggregate ('TRUE') or
an Individual link ('FALSE')."
REFERENCE
"IEEE 802.3 Subclause 30.7.1.1.6"
::= { dot3adAggEntry 5 }
dot3adAggActorAdminKey OBJECT-TYPE
SYNTAX LacpKey
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current administrative value of the Key for the Aggregator.
The administrative Key value may differ from the operational
Key value for the reasons discussed in 43.6.2. This is a 16-bit,
read-write value. The meaning of particular Key values
is of local significance."
REFERENCE
"IEEE 802.3 Subclause 30.7.1.1.7"
::= { dot3adAggEntry 6 }
dot3adAggActorOperKey OBJECT-TYPE
SYNTAX LacpKey
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational value of the Key for the Aggregator.
The administrative Key value may differ from the operational
Key value for the reasons discussed in 43.6.2.
This is a 16-bit read-only value. The meaning of particular Key
values is of local significance. "
REFERENCE
"IEEE 802.3 Subclause 30.7.1.1.8" 
::= { dot3adAggEntry 7 }
dot3adAggPartnerSystemID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 6-octet read-only MAC address value consisting
of the unique identifier for the current protocol Partner of
this Aggregator. A value of zero indicates that there is no
known Partner. If the aggregation is manually configured, this
System ID value will be a value assigned by the local System."
REFERENCE
"IEEE 802.3 Subclause 30.7.1.1.10"
::= { dot3adAggEntry 8 }
dot3adAggPartnerSystemPriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 2-octet read-only value that indicates the priority
value associated with the Partner's System ID. If the
aggregation is manually configured, this System Priority value
will be a value assigned by the local System."
REFERENCE
"IEEE 802.3 Subclause 30.7.1.1.11"
::= { dot3adAggEntry 9 }
dot3adAggPartnerOperKey OBJECT-TYPE
SYNTAX LacpKey
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational value of the Key for the
Aggregator's current protocol Partner. This is
a 16-bit read-only value. If the aggregation is manually
configured, this Key value will be a value assigned by the
local System."
REFERENCE
"IEEE 802.3 Subclause 30.7.1.1.12"
::= { dot3adAggEntry 10 }
dot3adAggCollectorMaxDelay OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this 16-bit read-write attribute defines
the maximum delay, in tens of microseconds, that
may be imposed by the Frame Collector between
receiving a frame from an Aggregator Parser, and
either delivering the frame to its MAC Client or discarding
the frame (see 43.2.3.1.1)."
REFERENCE
"IEEE 802.3 Subclause 30.7.1.1.32"
::= { dot3adAggEntry 11 }
-- -------------------------------------------------------------
-- The Aggregation Port List Table
-- -------------------------------------------------------------
dot3adAggPortListTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot3adAggPortListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains a list of all the ports
associated with each Aggregator."
REFERENCE
"IEEE 802.3 Subclause 30.7.1.1.30"
::= { dot3adAgg 2 }
dot3adAggPortListEntry OBJECT-TYPE
SYNTAX Dot3adAggPortListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the ports associated with a given Aggregator.
This is indexed by the ifIndex of the Aggregator."
INDEX { dot3adAggIndex }
::= { dot3adAggPortListTable 1 }
Dot3adAggPortListEntry ::=
SEQUENCE {
dot3adAggPortListPorts
            PortList
    }

dot3adAggPortListPorts OBJECT-TYPE
SYNTAX      PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The complete set of ports currently associated with
this Aggregator. Each bit set in this list represents
an Actor Port member of this Link Aggregation."
REFERENCE
"IEEE 802.3 Subclause 30.7.1.1.30"
::= { dot3adAggPortListEntry 1 }
-- -------------------------------------------------------------
-- The Aggregation Port Table
-- -------------------------------------------------------------
dot3adAggPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot3adAggPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains Link Aggregation Control
configuration information about every
Aggregation Port associated with this device.
A row appears in this table for each physical port."
REFERENCE
"IEEE 802.3 Subclause 30.7.2"
::= { dot3adAggPort 1 }
dot3adAggPortEntry OBJECT-TYPE
SYNTAX Dot3adAggPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Link Aggregation Control configuration
parameters for each Aggregation Port on this device."
INDEX { dot3adAggPortIndex }
::= { dot3adAggPortTable 1 }
Dot3adAggPortEntry ::=
SEQUENCE {
dot3adAggPortIndex
InterfaceIndex,
dot3adAggPortActorSystemPriority
INTEGER,
dot3adAggPortActorSystemID
MacAddress,
dot3adAggPortActorAdminKey
LacpKey,
dot3adAggPortActorOperKey
LacpKey,
dot3adAggPortPartnerAdminSystemPriority
INTEGER,
dot3adAggPortPartnerOperSystemPriority
INTEGER,
dot3adAggPortPartnerAdminSystemID
MacAddress,
dot3adAggPortPartnerOperSystemID
MacAddress,
dot3adAggPortPartnerAdminKey
LacpKey,
dot3adAggPortPartnerOperKey
LacpKey,
dot3adAggPortSelectedAggID
InterfaceIndex,
dot3adAggPortAttachedAggID
InterfaceIndex,
dot3adAggPortActorPort
INTEGER,
dot3adAggPortActorPortPriority
INTEGER,
dot3adAggPortPartnerAdminPort
INTEGER,
dot3adAggPortPartnerOperPort
INTEGER,
dot3adAggPortPartnerAdminPortPriority
INTEGER,
dot3adAggPortPartnerOperPortPriority
INTEGER,
dot3adAggPortActorAdminState
LacpState,
dot3adAggPortActorOperState
LacpState,
dot3adAggPortPartnerAdminState
LacpState,
dot3adAggPortPartnerOperState
LacpState,
dot3adAggPortAggregateOrIndividual
TruthValue
}
dot3adAggPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of the port"
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.1"
::= { dot3adAggPortEntry 1 }
dot3adAggPortActorSystemPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A 2-octet read-write value used to define the priority
value associated with the Actor's System ID."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.2"
::= { dot3adAggPortEntry 2 }
dot3adAggPortActorSystemID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 6-octet read-only MAC address value that defines
the value of the System ID for the System that contains this
Aggregation Port."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.3"
::= { dot3adAggPortEntry 3 }
dot3adAggPortActorAdminKey OBJECT-TYPE
SYNTAX LacpKey
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-write value.
The meaning of particular Key values is of local significance."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.4"
::= { dot3adAggPortEntry 4 }
dot3adAggPortActorOperKey OBJECT-TYPE
SYNTAX LacpKey
MAX-ACCESS   read-write
STATUS current
DESCRIPTION
"The current operational value of the Key for the
Aggregation Port. This is a 16-bit read-only value.
The meaning of particular Key values is of local significance."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.5"
::= { dot3adAggPortEntry 5 }
dot3adAggPortPartnerAdminSystemPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A 2-octet read-write value used to define the administrative
value of priority associated with the Partner's System ID. The
assigned value is used, along with the value of
aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey,
aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority,
in order to achieve manually configured aggregation."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.7"
::= { dot3adAggPortEntry 6 }
dot3adAggPortPartnerOperSystemPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 2-octet read-only value indicating the operational value
of priority associated with the Partner's System ID. The
v alue of this attribute may contain the manually configured v alue
carried in aAggPortPartnerAdminSystemPriority
if there is no protocol Partner."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.7"
::= { dot3adAggPortEntry 7 }
dot3adAggPortPartnerAdminSystemID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A 6-octet read-write MACAddress value representing
the administrative value of the Aggregation Port's protocol
Partner's System ID. The assigned value is used, along with
the value of aAggPortPartnerAdminSystemPriority,
aAggPortPartnerAdminKey, aAggPortPartnerAdminPort,
and aAggPortPartnerAdminPortPriority, in order to
achieve manually configured aggregation."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.8"
::= { dot3adAggPortEntry 8 }
dot3adAggPortPartnerOperSystemID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 6-octet read-only MACAddress value representing
the current value of the Aggregation Port's protocol Partner's
System ID. A value of zero indicates that there is no known
protocol P artner. The value of this attribute may contain the
manually configured value carried in
aAggPortPartnerAdminSystemID if there is no protocol Partner."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.9"
::= { dot3adAggPortEntry 9 }
dot3adAggPortPartnerAdminKey OBJECT-TYPE
SYNTAX LacpKey
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current administrative value of the Key for the
protocol Partner. This is a 16-bit read-write value.
The assigned value is used, along with the value of
aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID,
aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority,
in order to achieve manually configured aggregation."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.10"
::= { dot3adAggPortEntry 10 }
dot3adAggPortPartnerOperKey OBJECT-TYPE
SYNTAX LacpKey
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational value of the Key for the
protocol P artner. The value of this attribute may contain
the manually configured value carried in
aAggPortPartnerAdminKey if there is no protocol Partner.
This is a 16-bit read-only value."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.11"
::= { dot3adAggPortEntry 11 }
dot3adAggPortSelectedAggID OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier value of the Aggregator that this Aggregation
Port has currently selected. Zero indicates that the Aggregation
Port has not selected an Aggregator, either because it is in the
process of detaching from an Aggregator or because there is no
suitable Aggregator available for it to select. This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.12"
::= { dot3adAggPortEntry 12 }
dot3adAggPortAttachedAggID OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier value of the Aggregator that this Aggregation
Port is currently attached to. Zero indicates that the Aggregation
Port is not currently attached to an Aggregator. This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.13"
::= { dot3adAggPortEntry 13 }
dot3adAggPortActorPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number locally assigned to the Aggregation Port.
The port number is communicated in LACPDUs as the
Actor_Port. This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.14"
::= { dot3adAggPortEntry 14 }
dot3adAggPortActorPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority value assigned to this Aggregation Port.
This 16-bit value is read-write."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.15"
::= { dot3adAggPortEntry 15 }
dot3adAggPortPartnerAdminPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current administrative value of the port number
for the protocol Partner. This is a 16-bit read-write value.
The assigned value is used, along with the value of
aAggPortPartnerAdminSystemPriority,
aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey,
and aAggPortPartnerAdminPortPriority,
in order to achieve manually configured aggregation."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.16"
::= { dot3adAggPortEntry 16 }
dot3adAggPortPartnerOperPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational port number assigned to this Aggregation
Port by the Aggregation Port's protocol Partner. The value
of this attribute may contain the manually configured v alue
carried in aAggPortPartnerAdminPort if there is no protocol
Partner. This 16-bit value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.17"
::= { dot3adAggPortEntry 17 }
dot3adAggPortPartnerAdminPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current administrative value of the port priority
for the protocol Partner. This is a 16-bit read-write value.
The assigned value is used, along with the value of
aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID,
aAggPortPartnerAdminKey, and aAggPortPartnerAdminPort,
in order to achieve manually configured aggregation."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.18"
::= { dot3adAggPortEntry 18 }
dot3adAggPortPartnerOperPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority value assigned to this Aggregation Port
by the Partner. The value of this attribute may contain the
manually configured value carried in
aAggPortPartnerAdminPortPriority if there is no
protocol Partner. This 16-bit value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.19"
::= { dot3adAggPortEntry 19 }
dot3adAggPortActorAdminState OBJECT-TYPE
SYNTAX LacpState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of 8 bits, corresponding to the administrative values
of Actor_State (43.4.2) as transmitted by the Actor in LACPDUs.
The first bit corresponds to bit 0 of Actor_State (LACP_Activity),
the second bit corresponds to bit 1 (LACP_Timeout), the third bit
corresponds to bit 2 (Aggregation), the fourth bit corresponds to
bit 3 (Synchronization), the fifth bit corresponds to bit 4
(Collecting), the sixth bit corresponds to bit 5 (Distributing),
the seventh bit corresponds to bit 6 (Defaulted), and the eighth
bit corresponds to bit 7 (Expired). These values allow
administrative control over the values of LACP_Activity,
LACP_Timeout and Aggregation. This attribute value is read-write."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.20"
::= { dot3adAggPortEntry 20 }
dot3adAggPortActorOperState OBJECT-TYPE
SYNTAX LacpState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of 8 bits, corresponding to the current
operational values of Actor_State as transmitted by the
Actor in LACPDUs. The bit allocations are as defined in
30.7.2.1.20. This attribute value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.21"
::= { dot3adAggPortEntry 21 }
dot3adAggPortPartnerAdminState OBJECT-TYPE
SYNTAX LacpState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of 8 bits, corresponding to the current administrative
value of Actor_State for the protocol Partner. The bit
allocations are as defined in 30.7.2.1.20. This attribute value is
read-write. The assigned value is used in order to achieve
manually configured aggregation."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.22"
::= { dot3adAggPortEntry 22 }
dot3adAggPortPartnerOperState OBJECT-TYPE
SYNTAX LacpState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of 8 bits, corresponding to the current values of
Actor_State in the most recently received LACPDU transmitted
by the protocol Partner. The bit allocations are as defined in
30.7.2.1.20. In the absence of an active protocol Partner, this
value may reflect the manually configured value
aAggPortP artnerAdminState. This attribute value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.23"
::= { dot3adAggPortEntry 23 }
dot3adAggPortAggregateOrIndividual OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only Boolean value indicating whether the
Aggregation Port is able to Aggregate ('TRUE') or is
only able to operate as an Individual link ('FALSE')."
REFERENCE
"IEEE 802.3 Subclause 30.7.1.1.24"
::= { dot3adAggPortEntry 24 }
-- -------------------------------------------------------------
-- LACP Statistics Table
-- -------------------------------------------------------------
dot3adAggPortStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot3adAggPortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains Link Aggregation information
about every port that is associated with this device.
A row appears in this table for each physical port."
REFERENCE
"IEEE 802.3 Subclause 30.7.3"
::= { dot3adAggPort 2 }
dot3adAggPortStatsEntry OBJECT-TYPE
SYNTAX Dot3adAggPortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Link Aggregation Control Protocol statistics
for each port on this device."
INDEX { dot3adAggPortIndex }
::= { dot3adAggPortStatsTable 1 }
Dot3adAggPortStatsEntry ::=
SEQUENCE {
dot3adAggPortStatsLACPDUsRx
Counter32,
dot3adAggPortStatsMarkerPDUsRx
Counter32,
dot3adAggPortStatsMarkerResponsePDUsRx
Counter32,
dot3adAggPortStatsUnknownRx
Counter32,
dot3adAggPortStatsIllegalRx
Counter32,
dot3adAggPortStatsLACPDUsTx
Counter32,
dot3adAggPortStatsMarkerPDUsTx
Counter32,
dot3adAggPortStatsMarkerResponsePDUsTx
Counter32
}
dot3adAggPortStatsLACPDUsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid LACPDUs received on this
Aggregation Port. This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.3.1.2"
::= { dot3adAggPortStatsEntry 1 }
dot3adAggPortStatsMarkerPDUsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid Marker PDUs received on this
Aggregation Port. This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.3.1.3"
::= { dot3adAggPortStatsEntry 2 }
dot3adAggPortStatsMarkerResponsePDUsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid Marker Response PDUs received on this
Aggregation Port. This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.3.1.4"
::= { dot3adAggPortStatsEntry 3 }
dot3adAggPortStatsUnknownRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received that either:
- carry the Slow Protocols Ethernet Type value (43B.4),
but contain an unkno wn PDU, or:
- are addressed to the Slow Protocols group MAC
Address (43B.3), but do not carry the Slow Protocols Ethernet Type.
This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.3.1.5"
::= { dot3adAggPortStatsEntry 4 }
dot3adAggPortStatsIllegalRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received that carry the Slow
Protocols Ethernet Type value (43B.4), but contain a badly formed
PDU or an illegal value of Protocol Subtype (43B.4).
This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.3.1.6"
::= { dot3adAggPortStatsEntry 5 }
dot3adAggPortStatsLACPDUsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LACPDUs transmitted on this
Aggregation Port. This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.3.1.7"
::= { dot3adAggPortStatsEntry 6 }
dot3adAggPortStatsMarkerPDUsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Marker PDUs transmitted on this
Aggregation Port. This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.3.1.8"
::= { dot3adAggPortStatsEntry 7 }
dot3adAggPortStatsMarkerResponsePDUsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Marker Response PDUs transmitted
on this Aggregation Port. This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.3.1.9"
::= { dot3adAggPortStatsEntry 8 }
-- -------------------------------------------------------------
-- LACP Debug Table
-- -------------------------------------------------------------
dot3adAggPortDebugTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot3adAggPortDebugEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains Link Aggregation debug
information about every port that is associated with
this device. A row appears in this table for each
physical port."
REFERENCE
"IEEE 802.3 Subclause 30.7.4"
::= { dot3adAggPort 3 }
dot3adAggPortDebugEntry OBJECT-TYPE
SYNTAX Dot3adAggPortDebugEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the debug parameters for a port."
INDEX { dot3adAggPortIndex }
::= { dot3adAggPortDebugTable 1 }
Dot3adAggPortDebugEntry ::=
SEQUENCE {
dot3adAggPortDebugRxState
INTEGER,
dot3adAggPortDebugLastRxTime
TimeTicks,
dot3adAggPortDebugMuxState
INTEGER,
dot3adAggPortDebugMuxReason
DisplayString,
dot3adAggPortDebugActorChurnState
ChurnState,
dot3adAggPortDebugPartnerChurnState
ChurnState,
dot3adAggPortDebugActorChurnCount
Counter32,
dot3adAggPortDebugPartnerChurnCount
Counter32,
dot3adAggPortDebugActorSyncTransitionCount
Counter32,
dot3adAggPortDebugPartnerSyncTransitionCount
Counter32,
dot3adAggPortDebugActorChangeCount
Counter32,
dot3adAggPortDebugPartnerChangeCount
Counter32
}
dot3adAggPortDebugRxState OBJECT-TYPE
SYNTAX INTEGER {
current(1),
expired(2),
defaulted(3),
initialize(4),
lacpDisabled(5),
portDisabled(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute holds the value 'current' if the Receive
state machine for the Aggregation Port is in the
CURRENT state, 'expired' if the Receive state machine
is in the EXPIRED state, 'defaulted' if the Receive state
machine is in the DEFAULTED state, 'initialize' if the
Receive state machine is in the INITIALIZE state,
'lacpDisabled' if the Receive state machine is in the
LACP_DISABLED state, or 'portDisabled' if the Receive
state machine is in the PORT_DISABLED state.
This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.4.1.2"
::= { dot3adAggPortDebugEntry 1 }
dot3adAggPortDebugLastRxTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of aTimeSinceSystemReset (F.2.1) when
the last LACPDU was received by this Aggregation Port.
This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.4.1.3"
::= { dot3adAggPortDebugEntry 2 }
dot3adAggPortDebugMuxState OBJECT-TYPE
SYNTAX INTEGER {
detached(1),
waiting(2),
attached(3),
collecting(4),
distributing(5),
collectingDistributing(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute holds the value 'detached' if the Mux
state machine (43.4.14) for the Aggregation Port is
in the DETACHED state, 'waiting' if the Mux state machine
is in the WAITING state, 'attached' if the Mux state
machine for the Aggregation Port is in the ATTACHED
state, 'collecting' if the Mux state machine for the
Aggregation Port is in the COLLECTING state, 'distributing'
if the Mux state machine for the Aggregation Port is
in the DISTRIB UTING state, and 'collecting_distributing'
if the Mux state machine for the Aggregation Port is in
the COLLECTING_DISTRIBUTING state.
This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.4.1.4"
::= { dot3adAggPortDebugEntry 3 }
dot3adAggPortDebugMuxReason OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A human-readable text string indicating the reason
for the most recent change of Mux machine state.
This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.4.1.5"
::= { dot3adAggPortDebugEntry 4 }
dot3adAggPortDebugActorChurnState OBJECT-TYPE
SYNTAX ChurnState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the Actor Churn Detection machine
(43.4.17) for the Aggregation Port. A value of 'noChurn'
indicates that the state machine is in either the
NO_ACTOR_CHURN or the ACTOR_CHURN_MONITOR
state, and 'churn' indicates that the state machine is in the
ACTOR_CHURN state. This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.4.1.6"
::= { dot3adAggPortDebugEntry 5 }
dot3adAggPortDebugPartnerChurnState OBJECT-TYPE
SYNTAX ChurnState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the Partner Churn Detection machine
(43.4.17) for the Aggregation Port. A value of 'noChurn'
indicates that the state machine is in either the
NO_PARTNER_CHURN or the PARTNER_CHURN_MONITOR
state, and 'churn' indicates that the state machine is
in the PARTNER_CHURN state.
This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.4.1.7"
::= { dot3adAggPortDebugEntry 6 }
dot3adAggPortDebugActorChurnCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of times the Actor Churn state
machine has entered the ACTOR_CHURN state.
This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.4.1.8"
::= { dot3adAggPortDebugEntry 7 }
dot3adAggPortDebugPartnerChurnCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of times the Partner Churn
state machine has entered the PARTNER_CHURN state.
This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.4.1.9"
::= { dot3adAggPortDebugEntry 8 }
dot3adAggPortDebugActorSyncTransitionCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of times the Actor's Mux state
machine (43.4.15) has entered the IN_SYNC state.
This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.4.1.10"
::= { dot3adAggPortDebugEntry 9 }
dot3adAggPortDebugPartnerSyncTransitionCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of times the Partner's Mux
state machine (43.4.15) has entered the IN_SYNC state.
This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.4.1.11"
::= { dot3adAggPortDebugEntry 10 }
dot3adAggPortDebugActorChangeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of times the Actor's perception of
the LAG ID for this Aggregation Port has changed.
This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.4.1.12"
::= { dot3adAggPortDebugEntry 11 }
dot3adAggPortDebugPartnerChangeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of times the Partner's perception of
the LAG ID (see 43.3.6.1) for this Aggregation Port has changed.
This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.4.1.13"
::= { dot3adAggPortDebugEntry 12 }
-- -------------------------------------------------------------
-- IEEE 802.3ad MIB - Conformance Information
-- -------------------------------------------------------------
dot3adAggConformance OBJECT IDENTIFIER ::= { lagMIB 2 }
dot3adAggGroups OBJECT IDENTIFIER ::= { dot3adAggConformance 1 }
dot3adAggCompliances OBJECT IDENTIFIER
::= { dot3adAggConformance 2 }
-- -------------------------------------------------------------
-- units of conformance
-- -------------------------------------------------------------
dot3adAggGroup OBJECT-GROUP
OBJECTS {
dot3adAggActorSystemID,
dot3adAggActorSystemPriority,
dot3adAggAggregateOrIndividual,
dot3adAggActorAdminKey,
dot3adAggMACAddress,
dot3adAggActorOperKey,
dot3adAggPartnerSystemID,
dot3adAggPartnerSystemPriority,
dot3adAggPartnerOperKey,
dot3adAggCollectorMaxDelay
}
STATUS current
DESCRIPTION
"A collection of objects providing information about an
aggregation."
::= { dot3adAggGroups 1 }
dot3adAggPortListGroup OBJECT-GROUP
OBJECTS {
dot3adAggPortListPorts
}
STATUS current
DESCRIPTION
"A collection of objects providing information about every
port in an aggregation."
::= { dot3adAggGroups 2 }
dot3adAggPortGroup OBJECT-GROUP
OBJECTS {
dot3adAggPortActorSystemPriority,
dot3adAggPortActorSystemID,
dot3adAggPortActorAdminKey,
dot3adAggPortActorOperKey,
dot3adAggPortPartnerAdminSystemPriority,
dot3adAggPortPartnerOperSystemPriority,
dot3adAggPortPartnerAdminSystemID,
dot3adAggPortPartnerOperSystemID,
dot3adAggPortPartnerAdminKey,
dot3adAggPortPartnerOperKey,
dot3adAggPortSelectedAggID,
dot3adAggPortAttachedAggID,
dot3adAggPortActorPort,
dot3adAggPortActorPortPriority,
dot3adAggPortPartnerAdminPort,
dot3adAggPortPartnerOperPort,
dot3adAggPortPartnerAdminPortPriority,
dot3adAggPortPartnerOperPortPriority,
dot3adAggPortActorAdminState,
dot3adAggPortActorOperState,
dot3adAggPortPartnerAdminState,
dot3adAggPortPartnerOperState,
dot3adAggPortAggregateOrIndividual
}
STATUS current
DESCRIPTION
"A collection of objects providing information about every
port in an aggregation."
::= { dot3adAggGroups 3 }
dot3adAggPortStatsGroup OBJECT-GROUP
OBJECTS {
dot3adAggPortStatsLACPDUsRx,
dot3adAggPortStatsMarkerPDUsRx,
dot3adAggPortStatsMarkerResponsePDUsRx,
dot3adAggPortStatsUnknownRx,
dot3adAggPortStatsIllegalRx,
dot3adAggPortStatsLACPDUsTx,
dot3adAggPortStatsMarkerPDUsTx,
dot3adAggPortStatsMarkerResponsePDUsTx
}
STATUS current
DESCRIPTION
"A collection of objects providing information about every
port in an aggregation."
::= { dot3adAggGroups 4 }
dot3adAggPortDebugGroup OBJECT-GROUP
OBJECTS {
dot3adAggPortDebugRxState,
dot3adAggPortDebugLastRxTime,
dot3adAggPortDebugMuxState,
dot3adAggPortDebugMuxReason,
dot3adAggPortDebugActorChurnState,
dot3adAggPortDebugPartnerChurnState,
dot3adAggPortDebugActorChurnCount,
dot3adAggPortDebugPartnerChurnCount,
dot3adAggPortDebugActorSyncTransitionCount,
dot3adAggPortDebugPartnerSyncTransitionCount,
dot3adAggPortDebugActorChangeCount,
dot3adAggPortDebugPartnerChangeCount
}
STATUS current
DESCRIPTION
"A collection of objects providing debug information about
every aggregated port."
::= { dot3adAggGroups 5 }
dot3adTablesLastChangedGroup OBJECT-GROUP
OBJECTS {
dot3adTablesLastChanged
}
STATUS current
DESCRIPTION
"A collection of objects providing information about the time
of changes to the configuration of aggregations and their ports."
::= { dot3adAggGroups 6 }
-- -------------------------------------------------------------
-- compliance statements
-- -------------------------------------------------------------
dot3adAggCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for device support of
Link Aggregation."
MODULE
MANDATORY-GROUPS {
dot3adAggGroup,
dot3adAggPortGroup,
dot3adTablesLastChangedGroup
}
GROUP dot3adAggPortListGroup
DESCRIPTION
"This group is optional."
GROUP dot3adAggPortStatsGroup
DESCRIPTION
"This group is optional."
GROUP dot3adAggPortDebugGroup
DESCRIPTION
"This group is optional."
::= { dot3adAggCompliances 1 }
END