-- ================================================================= -- Description: DIFFSERV-MIB -- Reference: This mib was extracted from RFC 3289 -- ================================================================= DIFFSERV-MIB DEFINITIONS ::= BEGIN IMPORTS Unsigned32, Counter64, MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, zeroDotZero, mib-2 FROM SNMPv2-SMI TEXTUAL-CONVENTION, RowStatus, RowPointer, StorageType, AutonomousType FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ifIndex, InterfaceIndexOrZero FROM IF-MIB InetAddressType, InetAddress, InetAddressPrefixLength, InetPortNumber FROM INET-ADDRESS-MIB BurstSize FROM INTEGRATED-SERVICES-MIB Dscp, DscpOrAny FROM DIFFSERV-DSCP-TC; diffServMib MODULE-IDENTITY LAST-UPDATED "200202070000Z" ORGANIZATION "IETF Differentiated Services WG" CONTACT-INFO " Fred Baker Cisco Systems 1121 Via Del Rey Santa Barbara, CA 93117, USA E-mail: fred@cisco.com Kwok Ho Chan Nortel Networks 600 Technology Park Drive Billerica, MA 01821, USA E-mail: khchan@nortelnetworks.com Andrew Smith Harbour Networks Jiuling Building 21 North Xisanhuan Ave. Beijing, 100089, PRC E-mail: ah_smith@acm.org Differentiated Services Working Group: diffserv@ietf.org" DESCRIPTION "This MIB defines the objects necessary to manage a device that uses the Differentiated Services Architecture described in RFC 2475. The Conceptual Model of a Differentiated Services Router provides supporting information on how such a router is modeled." REVISION "200202070000Z" DESCRIPTION "Initial version, published as RFC 3289." ::= { mib-2 97 } diffServMIBObjects OBJECT IDENTIFIER ::= { diffServMib 1 } diffServMIBConformance OBJECT IDENTIFIER ::= { diffServMib 2 } diffServMIBAdmin OBJECT IDENTIFIER ::= { diffServMib 3 } IndexInteger ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "An integer which may be used as a table index." SYNTAX Unsigned32 (1..4294967295) IndexIntegerNextFree ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "An integer which may be used as a new Index in a table. The special value of 0 indicates that no more new entries can be created in the relevant table. When a MIB is used for configuration, an object with this SYNTAX always contains a legal value (if non-zero) for an index that is not currently used in the relevant table. The Command Generator (Network Management Application) reads this variable and uses the (non-zero) value read when creating a new row with an SNMP SET. When the SET is performed, the Command Responder (agent) must determine whether the value is indeed still unused; Two Network Management Applications may attempt to create a row (configuration entry) simultaneously and use the same value. If it is currently unused, the SET succeeds and the Command Responder (agent) changes the value of this object, according to an implementation-specific algorithm. If the value is in use, however, the SET fails. The Network Management Application must then re-read this variable to obtain a new usable value. An OBJECT-TYPE definition using this SYNTAX MUST specify the relevant table for which the object is providing this functionality." SYNTAX Unsigned32 (0..4294967295) IfDirection ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "IfDirection specifies a direction of data travel on an interface. 'inbound' traffic is operated on during reception from the interface, while 'outbound' traffic is operated on prior to transmission on the interface." SYNTAX INTEGER { inbound(1), -- ingress interface outbound(2) -- egress interface } -- -- Data Path -- diffServDataPath OBJECT IDENTIFIER ::= { diffServMIBObjects 1 } -- -- Data Path Table -- -- The Data Path Table enumerates the Differentiated Services -- Functional Data Paths within this device. Each entry in this table -- is indexed by ifIndex and ifDirection. Each entry provides the -- first Differentiated Services Functional Data Path Element to -- process data flowing along specific data path. This table should -- have at most two entries for each interface capable of -- Differentiated Services processing on this device: ingress and -- egress. -- Note that Differentiated Services Functional Data Path Elements -- linked together using their individual next pointers and anchored by -- an entry of the diffServDataPathTable constitute a functional data -- path. -- diffServDataPathTable OBJECT-TYPE SYNTAX SEQUENCE OF DiffServDataPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The data path table contains RowPointers indicating the start of the functional data path for each interface and traffic direction in this device. These may merge, or be separated into parallel data paths." ::= { diffServDataPath 1 } diffServDataPathEntry OBJECT-TYPE SYNTAX DiffServDataPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the data path table indicates the start of a single Differentiated Services Functional Data Path in this device. These are associated with individual interfaces, logical or physical, and therefore are instantiated by ifIndex. Therefore, the interface index must have been assigned, according to the procedures applicable to that, before it can be meaningfully used. Generally, this means that the interface must exist. When diffServDataPathStorage is of type nonVolatile, however, this may reflect the configuration for an interface whose ifIndex has been assigned but for which the supporting implementation is not currently present." INDEX { ifIndex, diffServDataPathIfDirection } ::= { diffServDataPathTable 1 } DiffServDataPathEntry ::= SEQUENCE { diffServDataPathIfDirection IfDirection, diffServDataPathStart RowPointer, diffServDataPathStorage StorageType, diffServDataPathStatus RowStatus } diffServDataPathIfDirection OBJECT-TYPE SYNTAX IfDirection MAX-ACCESS not-accessible STATUS current DESCRIPTION "IfDirection specifies whether the reception or transmission path for this interface is in view." ::= { diffServDataPathEntry 1 } diffServDataPathStart OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-create STATUS current DESCRIPTION "This selects the first Differentiated Services Functional Data Path Element to handle traffic for this data path. This RowPointer should point to an instance of one of: diffServClfrEntry diffServMeterEntry diffServActionEntry diffServAlgDropEntry diffServQEntry A value of zeroDotZero in this attribute indicates that no Differentiated Services treatment is performed on traffic of this data path. A pointer with the value zeroDotZero normally terminates a functional data path. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero." ::= { diffServDataPathEntry 2 } diffServDataPathStorage OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { diffServDataPathEntry 3 } diffServDataPathStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. All writable objects in this row may be modified at any time." ::= { diffServDataPathEntry 4 } -- -- Classifiers -- diffServClassifier OBJECT IDENTIFIER ::= { diffServMIBObjects 2 } -- -- Classifier Table -- -- The Classifier Table allows multiple classifier elements, of same or -- different types, to be used together. A classifier must completely -- classify all packets presented to it. This means that all traffic -- presented to a classifier must match at least one classifier element -- within the classifier, with the classifier element parameters -- specified by a filter. -- If there is ambiguity between classifier elements of different -- classifier, classifier linkage order indicates their precedence; the -- first classifier in the link is applied to the traffic first. -- Entries in the classifier element table serves as the anchor for -- each classification pattern, defined in filter table entries. Each -- classifier element table entry also specifies the subsequent -- downstream Differentiated Services Functional Data Path Element when -- the classification pattern is satisfied. Each entry in the -- classifier element table describes one branch of the fan-out -- characteristic of a classifier indicated in the Informal -- Differentiated Services Model section 4.1. A classifier is composed -- of one or more classifier elements. diffServClfrNextFree OBJECT-TYPE SYNTAX IndexIntegerNextFree MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an unused value for diffServClfrId, or a zero to indicate that none exist." ::= { diffServClassifier 1 } diffServClfrTable OBJECT-TYPE SYNTAX SEQUENCE OF DiffServClfrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table enumerates all the diffserv classifier functional data path elements of this device. The actual classification definitions are defined in diffServClfrElementTable entries belonging to each classifier. An entry in this table, pointed to by a RowPointer specifying an instance of diffServClfrStatus, is frequently used as the name for a set of classifier elements, which all use the index diffServClfrId. Per the semantics of the classifier element table, these entries constitute one or more unordered sets of tests which may be simultaneously applied to a message to classify it. The primary function of this table is to ensure that the value of diffServClfrId is unique before attempting to use it in creating a diffServClfrElementEntry. Therefore, the diffServClfrEntry must be created on the same SET as the diffServClfrElementEntry, or before the diffServClfrElementEntry is created." ::= { diffServClassifier 2 } diffServClfrEntry OBJECT-TYPE SYNTAX DiffServClfrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the classifier table describes a single classifier. All classifier elements belonging to the same classifier use the classifier's diffServClfrId as part of their index." INDEX { diffServClfrId } ::= { diffServClfrTable 1 } DiffServClfrEntry ::= SEQUENCE { diffServClfrId IndexInteger, diffServClfrStorage StorageType, diffServClfrStatus RowStatus } diffServClfrId OBJECT-TYPE SYNTAX IndexInteger MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that enumerates the classifier entries. Managers should obtain new values for row creation in this table by reading diffServClfrNextFree." ::= { diffServClfrEntry 1 } diffServClfrStorage OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { diffServClfrEntry 2 } diffServClfrStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used." ::= { diffServClfrEntry 3 } -- -- Classifier Element Table -- diffServClfrElementNextFree OBJECT-TYPE SYNTAX IndexIntegerNextFree MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an unused value for diffServClfrElementId, or a zero to indicate that none exist." ::= { diffServClassifier 3 } diffServClfrElementTable OBJECT-TYPE SYNTAX SEQUENCE OF DiffServClfrElementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The classifier element table enumerates the relationship between classification patterns and subsequent downstream Differentiated Services Functional Data Path elements. diffServClfrElementSpecific points to a filter that specifies the classification parameters. A classifier may use filter tables of different types together. One example of a filter table defined in this MIB is diffServMultiFieldClfrTable, for IP Multi-Field Classifiers (MFCs). Such an entry might identify anything from a single micro-flow (an identifiable sub-session packet stream directed from one sending transport to the receiving transport or transports), or aggregates of those such as the traffic from a host, traffic for an application, or traffic between two hosts using an application and a given DSCP. The standard Behavior Aggregate used in the Differentiated Services Architecture is encoded as a degenerate case of such an aggregate - the traffic using a particular DSCP value. Filter tables for other filter types may be defined elsewhere." ::= { diffServClassifier 4 } diffServClfrElementEntry OBJECT-TYPE SYNTAX DiffServClfrElementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the classifier element table describes a single element of the classifier." INDEX { diffServClfrId, diffServClfrElementId } ::= { diffServClfrElementTable 1 } DiffServClfrElementEntry ::= SEQUENCE { diffServClfrElementId IndexInteger, diffServClfrElementPrecedence Unsigned32, diffServClfrElementNext RowPointer, diffServClfrElementSpecific RowPointer, diffServClfrElementStorage StorageType, diffServClfrElementStatus RowStatus } diffServClfrElementId OBJECT-TYPE SYNTAX IndexInteger MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that enumerates the Classifier Element entries. Managers obtain new values for row creation in this table by reading diffServClfrElementNextFree." ::= { diffServClfrElementEntry 1 } diffServClfrElementPrecedence OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The relative order in which classifier elements are applied: higher numbers represent classifier element with higher precedence. Classifier elements with the same order must be unambiguous i.e. they must define non-overlapping patterns, and are considered to be applied simultaneously to the traffic stream. Classifier elements with different order may overlap in their filters: the classifier element with the highest order that matches is taken. On a given interface, there must be a complete classifier in place at all times in the ingress direction. This means one or more filters must match any possible pattern. There is no such requirement in the egress direction." ::= { diffServClfrElementEntry 2 } diffServClfrElementNext OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute provides one branch of the fan-out functionality of a classifier described in the Informal Differentiated Services Model section 4.1. This selects the next Differentiated Services Functional Data Path Element to handle traffic for this data path. This RowPointer should point to an instance of one of: diffServClfrEntry diffServMeterEntry diffServActionEntry diffServAlgDropEntry diffServQEntry A value of zeroDotZero in this attribute indicates no further Differentiated Services treatment is performed on traffic of this data path. The use of zeroDotZero is the normal usage for the last functional data path element of the current data path. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero." ::= { diffServClfrElementEntry 3 } diffServClfrElementSpecific OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-create STATUS current DESCRIPTION "A pointer to a valid entry in another table, filter table, that describes the applicable classification parameters, e.g. an entry in diffServMultiFieldClfrTable. The value zeroDotZero is interpreted to match anything not matched by another classifier element - only one such entry may exist for each classifier. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the element is ignored." ::= { diffServClfrElementEntry 4 } diffServClfrElementStorage OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { diffServClfrElementEntry 5 } diffServClfrElementStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used." ::= { diffServClfrElementEntry 6 } -- -- IP Multi-field Classification Table -- -- Classification based on six different fields in the IP header. -- Functional Data Paths may share definitions by using the same entry. -- diffServMultiFieldClfrNextFree OBJECT-TYPE SYNTAX IndexIntegerNextFree MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an unused value for diffServMultiFieldClfrId, or a zero to indicate that none exist." ::= { diffServClassifier 5 } diffServMultiFieldClfrTable OBJECT-TYPE SYNTAX SEQUENCE OF DiffServMultiFieldClfrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of IP Multi-field Classifier filter entries that a system may use to identify IP traffic." ::= { diffServClassifier 6 } diffServMultiFieldClfrEntry OBJECT-TYPE SYNTAX DiffServMultiFieldClfrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An IP Multi-field Classifier entry describes a single filter." INDEX { diffServMultiFieldClfrId } ::= { diffServMultiFieldClfrTable 1 } DiffServMultiFieldClfrEntry ::= SEQUENCE { diffServMultiFieldClfrId IndexInteger, diffServMultiFieldClfrAddrType InetAddressType, diffServMultiFieldClfrDstAddr InetAddress, diffServMultiFieldClfrDstPrefixLength InetAddressPrefixLength, diffServMultiFieldClfrSrcAddr InetAddress, diffServMultiFieldClfrSrcPrefixLength InetAddressPrefixLength, diffServMultiFieldClfrDscp DscpOrAny, diffServMultiFieldClfrFlowId Unsigned32, diffServMultiFieldClfrProtocol Unsigned32, diffServMultiFieldClfrDstL4PortMin InetPortNumber, diffServMultiFieldClfrDstL4PortMax InetPortNumber, diffServMultiFieldClfrSrcL4PortMin InetPortNumber, diffServMultiFieldClfrSrcL4PortMax InetPortNumber, diffServMultiFieldClfrStorage StorageType, diffServMultiFieldClfrStatus RowStatus } diffServMultiFieldClfrId OBJECT-TYPE SYNTAX IndexInteger MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that enumerates the MultiField Classifier filter entries. Managers obtain new values for row creation in this table by reading diffServMultiFieldClfrNextFree." ::= { diffServMultiFieldClfrEntry 1 } diffServMultiFieldClfrAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of IP address used by this classifier entry. While other types of addresses are defined in the InetAddressType textual convention, and DNS names, a classifier can only look at packets on the wire. Therefore, this object is limited to IPv4 and IPv6 addresses." ::= { diffServMultiFieldClfrEntry 2 } diffServMultiFieldClfrDstAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address to match against the packet's destination IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. diffServMultiFieldClfrDstPrefixLength indicates the number of bits that are relevant." ::= { diffServMultiFieldClfrEntry 3 } diffServMultiFieldClfrDstPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength UNITS "bits" MAX-ACCESS read-create STATUS current DESCRIPTION "The length of the CIDR Prefix carried in diffServMultiFieldClfrDstAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicates a match of a single host address, and a length between 0 and 32 indicates the use of a CIDR Prefix. IPv6 is similar, except that prefix lengths range from 0..128." DEFVAL { 0 } ::= { diffServMultiFieldClfrEntry 4 } diffServMultiFieldClfrSrcAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address to match against the packet's source IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. diffServMultiFieldClfrSrcPrefixLength indicates the number of bits that are relevant." ::= { diffServMultiFieldClfrEntry 5 } diffServMultiFieldClfrSrcPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength UNITS "bits" MAX-ACCESS read-create STATUS current DESCRIPTION "The length of the CIDR Prefix carried in diffServMultiFieldClfrSrcAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicates a match of a single host address, and a length between 0 and 32 indicates the use of a CIDR Prefix. IPv6 is similar, except that prefix lengths range from 0..128." DEFVAL { 0 } ::= { diffServMultiFieldClfrEntry 6 } diffServMultiFieldClfrDscp OBJECT-TYPE SYNTAX DscpOrAny MAX-ACCESS read-create STATUS current DESCRIPTION "The value that the DSCP in the packet must have to match this entry. A value of -1 indicates that a specific DSCP value has not been defined and thus all DSCP values are considered a match." DEFVAL { -1 } ::= { diffServMultiFieldClfrEntry 7 } diffServMultiFieldClfrFlowId OBJECT-TYPE SYNTAX Unsigned32 (0..1048575) MAX-ACCESS read-create STATUS current DESCRIPTION "The flow identifier in an IPv6 header." ::= { diffServMultiFieldClfrEntry 8 } diffServMultiFieldClfrProtocol OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The IP protocol to match against the IPv4 protocol number or the IPv6 Next- Header number in the packet. A value of 255 means match all. Note the protocol number of 255 is reserved by IANA, and Next-Header number of 0 is used in IPv6." DEFVAL { 255 } ::= { diffServMultiFieldClfrEntry 9 } diffServMultiFieldClfrDstL4PortMin OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum value that the layer-4 destination port number in the packet must have in order to match this classifier entry." DEFVAL { 0 } ::= { diffServMultiFieldClfrEntry 10 } diffServMultiFieldClfrDstL4PortMax OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in diffServMultiFieldClfrDstL4PortMin." DEFVAL { 65535 } ::= { diffServMultiFieldClfrEntry 11 } diffServMultiFieldClfrSrcL4PortMin OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum value that the layer-4 source port number in the packet must have in order to match this classifier entry." DEFVAL { 0 } ::= { diffServMultiFieldClfrEntry 12 } diffServMultiFieldClfrSrcL4PortMax OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum value that the layer-4 source port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in diffServMultiFieldClfrSrcL4PortMin." DEFVAL { 65535 } ::= { diffServMultiFieldClfrEntry 13 } diffServMultiFieldClfrStorage OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { diffServMultiFieldClfrEntry 14 } diffServMultiFieldClfrStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used." ::= { diffServMultiFieldClfrEntry 15 } -- -- Meters -- diffServMeter OBJECT IDENTIFIER ::= { diffServMIBObjects 3 } -- -- This MIB supports a variety of Meters. It includes a specific -- definition for Token Bucket Meter, which are but one type of -- specification. Other metering parameter sets can be defined in other -- MIBs. -- Multiple meter elements may be logically cascaded using their -- diffServMeterSucceedNext and diffServMeterFailNext pointers if -- required. One example of this might be for an AF PHB implementation -- that uses multiple level conformance meters. -- Cascading of individual meter elements in the MIB is intended to be -- functionally equivalent to multiple level conformance determination -- of a packet. The sequential nature of the representation is merely -- a notational convenience for this MIB. -- srTCM meters (RFC 2697) can be specified using two sets of -- diffServMeterEntry and diffServTBParamEntry. The first set specifies -- the Committed Information Rate and Committed Burst Size -- token-bucket. The second set specifies the Excess Burst Size -- token-bucket. -- trTCM meters (RFC 2698) can be specified using two sets of -- diffServMeterEntry and diffServTBParamEntry. The first set specifies -- the Committed Information Rate and Committed Burst Size -- token-bucket. The second set specifies the Peak Information Rate -- and Peak Burst Size token-bucket. -- tswTCM meters (RFC 2859) can be specified using two sets of -- diffServMeterEntry and diffServTBParamEntry. The first set specifies -- the Committed Target Rate token-bucket. The second set specifies -- the Peak Target Rate token-bucket. diffServTBParamInterval in each -- token bucket reflects the Average Interval. -- diffServMeterNextFree OBJECT-TYPE SYNTAX IndexIntegerNextFree MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an unused value for diffServMeterId, or a zero to indicate that none exist." ::= { diffServMeter 1 } diffServMeterTable OBJECT-TYPE SYNTAX SEQUENCE OF DiffServMeterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table enumerates specific meters that a system may use to police a stream of traffic. The traffic stream to be metered is determined by the Differentiated Services Functional Data Path Element(s) upstream of the meter i.e. by the object(s) that point to each entry in this table. This may include all traffic on an interface. Specific meter details are to be found in table entry referenced by diffServMeterSpecific." ::= { diffServMeter 2 } diffServMeterEntry OBJECT-TYPE SYNTAX DiffServMeterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the meter table describes a single conformance level of a meter." INDEX { diffServMeterId } ::= { diffServMeterTable 1 } DiffServMeterEntry ::= SEQUENCE { diffServMeterId IndexInteger, diffServMeterSucceedNext RowPointer, diffServMeterFailNext RowPointer, diffServMeterSpecific RowPointer, diffServMeterStorage StorageType, diffServMeterStatus RowStatus } diffServMeterId OBJECT-TYPE SYNTAX IndexInteger MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that enumerates the Meter entries. Managers obtain new values for row creation in this table by reading diffServMeterNextFree." ::= { diffServMeterEntry 1 } diffServMeterSucceedNext OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-create STATUS current DESCRIPTION "If the traffic does conform, this selects the next Differentiated Services Functional Data Path element to handle traffic for this data path. This RowPointer should point to an instance of one of: diffServClfrEntry diffServMeterEntry diffServActionEntry diffServAlgDropEntry diffServQEntry A value of zeroDotZero in this attribute indicates that no further Differentiated Services treatment is performed on traffic of this data path. The use of zeroDotZero is the normal usage for the last functional data path element of the current data path. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero." DEFVAL { zeroDotZero } ::= { diffServMeterEntry 2 } diffServMeterFailNext OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-create STATUS current DESCRIPTION "If the traffic does not conform, this selects the next Differentiated Services Functional Data Path element to handle traffic for this data path. This RowPointer should point to an instance of one of: diffServClfrEntry diffServMeterEntry diffServActionEntry diffServAlgDropEntry diffServQEntry A value of zeroDotZero in this attribute indicates no further Differentiated Services treatment is performed on traffic of this data path. The use of zeroDotZero is the normal usage for the last functional data path element of the current data path. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero." DEFVAL { zeroDotZero } ::= { diffServMeterEntry 3 } diffServMeterSpecific OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-create STATUS current DESCRIPTION "This indicates the behavior of the meter by pointing to an entry containing detailed parameters. Note that entries in that specific table must be managed explicitly. For example, diffServMeterSpecific may point to an entry in diffServTBParamTable, which contains an instance of a single set of Token Bucket parameters. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the meter always succeeds." ::= { diffServMeterEntry 4 } diffServMeterStorage OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { diffServMeterEntry 5 } diffServMeterStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used." ::= { diffServMeterEntry 6 } -- -- Token Bucket Parameter Table -- diffServTBParam OBJECT IDENTIFIER ::= { diffServMIBObjects 4 } -- Each entry in the Token Bucket Parameter Table parameterize a single -- token bucket. Multiple token buckets can be used together to -- parameterize multiple levels of conformance. -- Note that an entry in the Token Bucket Parameter Table can be shared -- by multiple diffServMeterTable entries. -- diffServTBParamNextFree OBJECT-TYPE SYNTAX IndexIntegerNextFree MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an unused value for diffServTBParamId, or a zero to indicate that none exist." ::= { diffServTBParam 1 } diffServTBParamTable OBJECT-TYPE SYNTAX SEQUENCE OF DiffServTBParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table enumerates a single set of token bucket meter parameters that a system may use to police a stream of traffic. Such meters are modeled here as having a single rate and a single burst size. Multiple entries are used when multiple rates/burst sizes are needed." ::= { diffServTBParam 2 } diffServTBParamEntry OBJECT-TYPE SYNTAX DiffServTBParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry that describes a single set of token bucket parameters." INDEX { diffServTBParamId } ::= { diffServTBParamTable 1 } DiffServTBParamEntry ::= SEQUENCE { diffServTBParamId IndexInteger, diffServTBParamType AutonomousType, diffServTBParamRate Unsigned32, diffServTBParamBurstSize BurstSize, diffServTBParamInterval Unsigned32, diffServTBParamStorage StorageType, diffServTBParamStatus RowStatus } diffServTBParamId OBJECT-TYPE SYNTAX IndexInteger MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that enumerates the Token Bucket Parameter entries. Managers obtain new values for row creation in this table by reading diffServTBParamNextFree." ::= { diffServTBParamEntry 1 } diffServTBParamType OBJECT-TYPE SYNTAX AutonomousType MAX-ACCESS read-create STATUS current DESCRIPTION "The Metering algorithm associated with the Token Bucket parameters. zeroDotZero indicates this is unknown. Standard values for generic algorithms: diffServTBParamSimpleTokenBucket, diffServTBParamAvgRate, diffServTBParamSrTCMBlind, diffServTBParamSrTCMAware, diffServTBParamTrTCMBlind, diffServTBParamTrTCMAware, and diffServTBParamTswTCM are specified in this MIB as OBJECT- IDENTITYs; additional values may be further specified in other MIBs." ::= { diffServTBParamEntry 2 } diffServTBParamRate OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) UNITS "kilobits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The token-bucket rate, in kilobits per second (kbps). This attribute is used for: 1. CIR in RFC 2697 for srTCM 2. CIR and PIR in RFC 2698 for trTCM 3. CTR and PTR in RFC 2859 for TSWTCM 4. AverageRate in RFC 3290." ::= { diffServTBParamEntry 3 } diffServTBParamBurstSize OBJECT-TYPE SYNTAX BurstSize UNITS "Bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of bytes in a single transmission burst. This attribute is used for: 1. CBS and EBS in RFC 2697 for srTCM 2. CBS and PBS in RFC 2698 for trTCM 3. Burst Size in RFC 3290." ::= { diffServTBParamEntry 4 } diffServTBParamInterval OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) UNITS "microseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The time interval used with the token bucket. For: 1. Average Rate Meter, the Informal Differentiated Services Model section 5.2.1, - Delta. 2. Simple Token Bucket Meter, the Informal Differentiated Services Model section 5.1, - time interval t. 3. RFC 2859 TSWTCM, - AVG_INTERVAL. 4. RFC 2697 srTCM, RFC 2698 trTCM, - token bucket update time interval." ::= { diffServTBParamEntry 5 } diffServTBParamStorage OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { diffServTBParamEntry 6 } diffServTBParamStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used." ::= { diffServTBParamEntry 7 } -- -- OIDs for diffServTBParamType definitions. -- diffServTBMeters OBJECT IDENTIFIER ::= { diffServMIBAdmin 1 } diffServTBParamSimpleTokenBucket OBJECT-IDENTITY STATUS current DESCRIPTION "Two Parameter Token Bucket Meter as described in the Informal Differentiated Services Model section 5.2.3." ::= { diffServTBMeters 1 } diffServTBParamAvgRate OBJECT-IDENTITY STATUS current DESCRIPTION "Average Rate Meter as described in the Informal Differentiated Services Model section 5.2.1." ::= { diffServTBMeters 2 } diffServTBParamSrTCMBlind OBJECT-IDENTITY STATUS current DESCRIPTION "Single Rate Three Color Marker Metering as defined by RFC 2697, in the `Color Blind' mode as described by the RFC." REFERENCE "RFC 2697" ::= { diffServTBMeters 3 } diffServTBParamSrTCMAware OBJECT-IDENTITY STATUS current DESCRIPTION "Single Rate Three Color Marker Metering as defined by RFC 2697, in the `Color Aware' mode as described by the RFC." REFERENCE "RFC 2697" ::= { diffServTBMeters 4 } diffServTBParamTrTCMBlind OBJECT-IDENTITY STATUS current DESCRIPTION "Two Rate Three Color Marker Metering as defined by RFC 2698, in the `Color Blind' mode as described by the RFC." REFERENCE "RFC 2698" ::= { diffServTBMeters 5 } diffServTBParamTrTCMAware OBJECT-IDENTITY STATUS current DESCRIPTION "Two Rate Three Color Marker Metering as defined by RFC 2698, in the `Color Aware' mode as described by the RFC." REFERENCE "RFC 2698" ::= { diffServTBMeters 6 } diffServTBParamTswTCM OBJECT-IDENTITY STATUS current DESCRIPTION "Time Sliding Window Three Color Marker Metering as defined by RFC 2859." REFERENCE "RFC 2859" ::= { diffServTBMeters 7 } -- -- Actions -- diffServAction OBJECT IDENTIFIER ::= { diffServMIBObjects 5 } -- -- The Action Table allows enumeration of the different types of -- actions to be applied to a traffic flow. -- diffServActionNextFree OBJECT-TYPE SYNTAX IndexIntegerNextFree MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an unused value for diffServActionId, or a zero to indicate that none exist." ::= { diffServAction 1 } diffServActionTable OBJECT-TYPE SYNTAX SEQUENCE OF DiffServActionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Action Table enumerates actions that can be performed to a stream of traffic. Multiple actions can be concatenated. For example, traffic exiting from a meter may be counted, marked, and potentially dropped before entering a queue. Specific actions are indicated by diffServActionSpecific which points to an entry of a specific action type parameterizing the action in detail." ::= { diffServAction 2 } diffServActionEntry OBJECT-TYPE SYNTAX DiffServActionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in the action table allows description of one specific action to be applied to traffic." INDEX { diffServActionId } ::= { diffServActionTable 1 } DiffServActionEntry ::= SEQUENCE { diffServActionId IndexInteger, diffServActionInterface InterfaceIndexOrZero, diffServActionNext RowPointer, diffServActionSpecific RowPointer, diffServActionStorage StorageType, diffServActionStatus RowStatus } diffServActionId OBJECT-TYPE SYNTAX IndexInteger MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that enumerates the Action entries. Managers obtain new values for row creation in this table by reading diffServActionNextFree." ::= { diffServActionEntry 1 } diffServActionInterface OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The interface index (value of ifIndex) that this action occurs on. This may be derived from the diffServDataPathStartEntry's index by extension through the various RowPointers. However, as this may be difficult for a network management station, it is placed here as well. If this is indeterminate, the value is zero. This is of especial relevance when reporting the counters which may apply to traffic crossing an interface: diffServCountActOctets, diffServCountActPkts, diffServAlgDropOctets, diffServAlgDropPkts, diffServAlgRandomDropOctets, and diffServAlgRandomDropPkts. It is also especially relevant to the queue and scheduler which may be subsequently applied." ::= { diffServActionEntry 2 } diffServActionNext OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-create STATUS current DESCRIPTION "This selects the next Differentiated Services Functional Data Path Element to handle traffic for this data path. This RowPointer should point to an instance of one of: diffServClfrEntry diffServMeterEntry diffServActionEntry diffServAlgDropEntry diffServQEntry A value of zeroDotZero in this attribute indicates no further Differentiated Services treatment is performed on traffic of this data path. The use of zeroDotZero is the normal usage for the last functional data path element of the current data path. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero." DEFVAL { zeroDotZero } ::= { diffServActionEntry 3 } diffServActionSpecific OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-create STATUS current DESCRIPTION "A pointer to an object instance providing additional information for the type of action indicated by this action table entry. For the standard actions defined by this MIB module, this should point to either a diffServDscpMarkActEntry or a diffServCountActEntry. For other actions, it may point to an object instance defined in some other MIB. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the Meter should be treated as if it were not present. This may lead to incorrect policy behavior." ::= { diffServActionEntry 4 } diffServActionStorage OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { diffServActionEntry 5 } diffServActionStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used." ::= { diffServActionEntry 6 } -- DSCP Mark Action Table -- -- Rows of this table are pointed to by diffServActionSpecific to -- provide detailed parameters specific to the DSCP Mark action. -- -- A single entry in this table can be shared by multiple -- diffServActionTable entries. -- diffServDscpMarkActTable OBJECT-TYPE SYNTAX SEQUENCE OF DiffServDscpMarkActEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table enumerates specific DSCPs used for marking or remarking the DSCP field of IP packets. The entries of this table may be referenced by a diffServActionSpecific attribute." ::= { diffServAction 3 } diffServDscpMarkActEntry OBJECT-TYPE SYNTAX DiffServDscpMarkActEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the DSCP mark action table that describes a single DSCP used for marking." INDEX { diffServDscpMarkActDscp } ::= { diffServDscpMarkActTable 1 } DiffServDscpMarkActEntry ::= SEQUENCE { diffServDscpMarkActDscp Dscp } diffServDscpMarkActDscp OBJECT-TYPE SYNTAX Dscp MAX-ACCESS read-only STATUS current DESCRIPTION "The DSCP that this Action will store into the DSCP field of the subject. It is quite possible that the only packets subject to this Action are already marked with this DSCP. Note also that Differentiated Services processing may result in packet being marked on both ingress to a network and on egress from it, and that ingress and egress can occur in the same router." ::= { diffServDscpMarkActEntry 1 } -- -- Count Action Table -- -- Because the MIB structure allows multiple cascading -- diffServActionEntry be used to describe multiple actions for a data -- path, the counter became an optional action type. In normal -- implementation, either a data path has counters or it does not, as -- opposed to being configurable. The management entity may choose to -- read the counter or not. Hence it is recommended for implementation -- that have counters to always configure the count action as the first -- of multiple actions. -- diffServCountActNextFree OBJECT-TYPE SYNTAX IndexIntegerNextFree MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an unused value for diffServCountActId, or a zero to indicate that none exist." ::= { diffServAction 4 } diffServCountActTable OBJECT-TYPE SYNTAX SEQUENCE OF DiffServCountActEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains counters for all the traffic passing through an action element." ::= { diffServAction 5 } diffServCountActEntry OBJECT-TYPE SYNTAX DiffServCountActEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the count action table describes a single set of traffic counters." INDEX { diffServCountActId } ::= { diffServCountActTable 1 } DiffServCountActEntry ::= SEQUENCE { diffServCountActId IndexInteger, diffServCountActOctets Counter64, diffServCountActPkts Counter64, diffServCountActStorage StorageType, diffServCountActStatus RowStatus } diffServCountActId OBJECT-TYPE SYNTAX IndexInteger MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that enumerates the Count Action entries. Managers obtain new values for row creation in this table by reading diffServCountActNextFree." ::= { diffServCountActEntry 1 } diffServCountActOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets at the Action data path element. Discontinuities in the value of this counter can occur at re- initialization of the management system and at other times as indicated by the value of ifCounterDiscontinuityTime on the relevant interface." ::= { diffServCountActEntry 2 } diffServCountActPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets at the Action data path element. Discontinuities in the value of this counter can occur at re- initialization of the management system and at other times as indicated by the value of ifCounterDiscontinuityTime on the relevant interface." ::= { diffServCountActEntry 3 } diffServCountActStorage OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { diffServCountActEntry 4 } diffServCountActStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used." ::= { diffServCountActEntry 5 } -- -- Algorithmic Drop Table -- diffServAlgDrop OBJECT IDENTIFIER ::= { diffServMIBObjects 6 } diffServAlgDropNextFree OBJECT-TYPE SYNTAX IndexIntegerNextFree MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an unused value for diffServAlgDropId, or a zero to indicate that none exist." ::= { diffServAlgDrop 1 } diffServAlgDropTable OBJECT-TYPE SYNTAX SEQUENCE OF DiffServAlgDropEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The algorithmic drop table contains entries describing an element that drops packets according to some algorithm." ::= { diffServAlgDrop 2 } diffServAlgDropEntry OBJECT-TYPE SYNTAX DiffServAlgDropEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry describes a process that drops packets according to some algorithm. Further details of the algorithm type are to be found in diffServAlgDropType and with more detail parameter entry pointed to by diffServAlgDropSpecific when necessary." INDEX { diffServAlgDropId } ::= { diffServAlgDropTable 1 } DiffServAlgDropEntry ::= SEQUENCE { diffServAlgDropId IndexInteger, diffServAlgDropType INTEGER, diffServAlgDropNext RowPointer, diffServAlgDropQMeasure RowPointer, diffServAlgDropQThreshold Unsigned32, diffServAlgDropSpecific RowPointer, diffServAlgDropOctets Counter64, diffServAlgDropPkts Counter64, diffServAlgRandomDropOctets Counter64, diffServAlgRandomDropPkts Counter64, diffServAlgDropStorage StorageType, diffServAlgDropStatus RowStatus } diffServAlgDropId OBJECT-TYPE SYNTAX IndexInteger MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that enumerates the Algorithmic Dropper entries. Managers obtain new values for row creation in this table by reading diffServAlgDropNextFree." ::= { diffServAlgDropEntry 1 } diffServAlgDropType OBJECT-TYPE SYNTAX INTEGER { other(1), tailDrop(2), headDrop(3), randomDrop(4), alwaysDrop(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of algorithm used by this dropper. The value other(1) requires further specification in some other MIB module. In the tailDrop(2) algorithm, diffServAlgDropQThreshold represents the maximum depth of the queue, pointed to by diffServAlgDropQMeasure, beyond which all newly arriving packets will be dropped. In the headDrop(3) algorithm, if a packet arrives when the current depth of the queue, pointed to by diffServAlgDropQMeasure, is at diffServAlgDropQThreshold, packets currently at the head of the queue are dropped to make room for the new packet to be enqueued at the tail of the queue. In the randomDrop(4) algorithm, on packet arrival, an Active Queue Management algorithm is executed which may randomly drop a packet. This algorithm may be proprietary, and it may drop either the arriving packet or another packet in the queue. diffServAlgDropSpecific points to a diffServRandomDropEntry that describes the algorithm. For this algorithm, diffServAlgDropQThreshold is understood to be the absolute maximum size of the queue and additional parameters are described in diffServRandomDropTable. The alwaysDrop(5) algorithm is as its name specifies; always drop. In this case, the other configuration values in this Entry are not meaningful; There is no useful 'next' processing step, there is no queue, and parameters describing the queue are not useful. Therefore, diffServAlgDropNext, diffServAlgDropMeasure, and diffServAlgDropSpecific are all zeroDotZero." ::= { diffServAlgDropEntry 2 } diffServAlgDropNext OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-create STATUS current DESCRIPTION "This selects the next Differentiated Services Functional Data Path Element to handle traffic for this data path. This RowPointer should point to an instance of one of: diffServClfrEntry diffServMeterEntry diffServActionEntry diffServQEntry A value of zeroDotZero in this attribute indicates no further Differentiated Services treatment is performed on traffic of this data path. The use of zeroDotZero is the normal usage for the last functional data path element of the current data path. When diffServAlgDropType is alwaysDrop(5), this object is ignored. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero." ::= { diffServAlgDropEntry 3 } diffServAlgDropQMeasure OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-create STATUS current DESCRIPTION "Points to an entry in the diffServQTable to indicate the queue that a drop algorithm is to monitor when deciding whether to drop a packet. If the row pointed to does not exist, the algorithmic dropper element is considered inactive. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero." ::= { diffServAlgDropEntry 4 } diffServAlgDropQThreshold OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) UNITS "Bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold on the depth in bytes of the queue being measured at which a trigger is generated to the dropping algorithm, unless diffServAlgDropType is alwaysDrop(5) where this object is ignored. For the tailDrop(2) or headDrop(3) algorithms, this represents the depth of the queue, pointed to by diffServAlgDropQMeasure, at which the drop action will take place. Other algorithms will need to define their own semantics for this threshold." ::= { diffServAlgDropEntry 5 } diffServAlgDropSpecific OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-create STATUS current DESCRIPTION "Points to a table entry that provides further detail regarding a drop algorithm. Entries with diffServAlgDropType equal to other(1) may have this point to a table defined in another MIB module. Entries with diffServAlgDropType equal to randomDrop(4) must have this point to an entry in diffServRandomDropTable. For all other algorithms specified in this MIB, this should take the value zeroDotZero. The diffServAlgDropType is authoritative for the type of the drop algorithm and the specific parameters for the drop algorithm needs to be evaluated based on the diffServAlgDropType. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero." ::= { diffServAlgDropEntry 6 } diffServAlgDropOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets that have been deterministically dropped by this drop process. Discontinuities in the value of this counter can occur at re- initialization of the management system and at other times as indicated by the value of ifCounterDiscontinuityTime on the relevant interface." ::= { diffServAlgDropEntry 7 } diffServAlgDropPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets that have been deterministically dropped by this drop process. Discontinuities in the value of this counter can occur at re- initialization of the management system and at other times as indicated by the value of ifCounterDiscontinuityTime on the relevant interface." ::= { diffServAlgDropEntry 8 } diffServAlgRandomDropOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets that have been randomly dropped by this drop process. This counter applies, therefore, only to random droppers. Discontinuities in the value of this counter can occur at re- initialization of the management system and at other times as indicated by the value of ifCounterDiscontinuityTime on the relevant interface." ::= { diffServAlgDropEntry 9 } diffServAlgRandomDropPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets that have been randomly dropped by this drop process. This counter applies, therefore, only to random droppers. Discontinuities in the value of this counter can occur at re- initialization of the management system and at other times as indicated by the value of ifCounterDiscontinuityTime on the relevant interface." ::= { diffServAlgDropEntry 10 } diffServAlgDropStorage OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { diffServAlgDropEntry 11 } diffServAlgDropStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used." ::= { diffServAlgDropEntry 12 } -- -- Random Drop Table -- diffServRandomDropNextFree OBJECT-TYPE SYNTAX IndexIntegerNextFree MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an unused value for diffServRandomDropId, or a zero to indicate that none exist." ::= { diffServAlgDrop 3 } diffServRandomDropTable OBJECT-TYPE SYNTAX SEQUENCE OF DiffServRandomDropEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The random drop table contains entries describing a process that drops packets randomly. Entries in this table are pointed to by diffServAlgDropSpecific." ::= { diffServAlgDrop 4 } diffServRandomDropEntry OBJECT-TYPE SYNTAX DiffServRandomDropEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry describes a process that drops packets according to a random algorithm." INDEX { diffServRandomDropId } ::= { diffServRandomDropTable 1 } DiffServRandomDropEntry ::= SEQUENCE { diffServRandomDropId IndexInteger, diffServRandomDropMinThreshBytes Unsigned32, diffServRandomDropMinThreshPkts Unsigned32, diffServRandomDropMaxThreshBytes Unsigned32, diffServRandomDropMaxThreshPkts Unsigned32, diffServRandomDropProbMax Unsigned32, diffServRandomDropWeight Unsigned32, diffServRandomDropSamplingRate Unsigned32, diffServRandomDropStorage StorageType, diffServRandomDropStatus RowStatus } diffServRandomDropId OBJECT-TYPE SYNTAX IndexInteger MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that enumerates the Random Drop entries. Managers obtain new values for row creation in this table by reading diffServRandomDropNextFree." ::= { diffServRandomDropEntry 1 } diffServRandomDropMinThreshBytes OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The average queue depth in bytes, beyond which traffic has a non-zero probability of being dropped. Changes in this variable may or may not be reflected in the reported value of diffServRandomDropMinThreshPkts." ::= { diffServRandomDropEntry 2 } diffServRandomDropMinThreshPkts OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) UNITS "packets" MAX-ACCESS read-create STATUS current DESCRIPTION "The average queue depth in packets, beyond which traffic has a non-zero probability of being dropped. Changes in this variable may or may not be reflected in the reported value of diffServRandomDropMinThreshBytes." ::= { diffServRandomDropEntry 3 } diffServRandomDropMaxThreshBytes OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The average queue depth beyond which traffic has a probability indicated by diffServRandomDropProbMax of being dropped or marked. Note that this differs from the physical queue limit, which is stored in diffServAlgDropQThreshold. Changes in this variable may or may not be reflected in the reported value of diffServRandomDropMaxThreshPkts." ::= { diffServRandomDropEntry 4 } diffServRandomDropMaxThreshPkts OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) UNITS "packets" MAX-ACCESS read-create STATUS current DESCRIPTION "The average queue depth beyond which traffic has a probability indicated by diffServRandomDropProbMax of being dropped or marked. Note that this differs from the physical queue limit, which is stored in diffServAlgDropQThreshold. Changes in this variable may or may not be reflected in the reported value of diffServRandomDropMaxThreshBytes." ::= { diffServRandomDropEntry 5 } diffServRandomDropProbMax OBJECT-TYPE SYNTAX Unsigned32 (0..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The worst case random drop probability, expressed in drops per thousand packets. For example, if in the worst case every arriving packet may be dropped (100%) for a period, this has the value 1000. Alternatively, if in the worst case only one percent (1%) of traffic may be dropped, it has the value 10." ::= { diffServRandomDropEntry 6 } diffServRandomDropWeight OBJECT-TYPE SYNTAX Unsigned32 (0..65536) MAX-ACCESS read-create STATUS current DESCRIPTION "The weighting of past history in affecting the Exponentially Weighted Moving Average function that calculates the current average queue depth. The equation uses diffServRandomDropWeight/65536 as the coefficient for the new sample in the equation, and (65536 - diffServRandomDropWeight)/65536 as the coefficient of the old value. Implementations may limit the values of diffServRandomDropWeight to a subset of the possible range of values, such as powers of two. Doing this would facilitate implementation of the Exponentially Weighted Moving Average using shift instructions or registers." ::= { diffServRandomDropEntry 7 } diffServRandomDropSamplingRate OBJECT-TYPE SYNTAX Unsigned32 (0..1000000) MAX-ACCESS read-create STATUS current DESCRIPTION "The number of times per second the queue is sampled for queue average calculation. A value of zero is used to mean that the queue is sampled approximately each time a packet is enqueued (or dequeued)." ::= { diffServRandomDropEntry 8 } diffServRandomDropStorage OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { diffServRandomDropEntry 9 } diffServRandomDropStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used." ::= { diffServRandomDropEntry 10 } -- -- Queue Table -- diffServQueue OBJECT IDENTIFIER ::= { diffServMIBObjects 7 } -- -- An entry of diffServQTable represents a FIFO queue Differentiated -- Services Functional Data Path element as described in the Informal -- Differentiated Services Model section 7.1.1. Note that the -- specification of scheduling parameters for a queue as part of the -- input to a scheduler functional data path element as described in -- the Informal Differentiated Services Model section 7.1.2. This -- allows building of hierarchical queuing/scheduling. A queue -- therefore has these attributes: -- -- 1. Which scheduler will service this queue, diffServQNext. -- 2. How the scheduler will service this queue, with respect -- to all the other queues the same scheduler needs to service, -- diffServQMinRate. -- -- Note that upstream Differentiated Services Functional Data Path -- elements may point to a shared diffServQTable entry as described -- in the Informal Differentiated Services Model section 7.1.1. -- diffServQNextFree OBJECT-TYPE SYNTAX IndexIntegerNextFree MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an unused value for diffServQId, or a zero to indicate that none exist." ::= { diffServQueue 1 } diffServQTable OBJECT-TYPE SYNTAX SEQUENCE OF DiffServQEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Queue Table enumerates the individual queues. Note that the MIB models queuing systems as composed of individual queues, one per class of traffic, even though they may in fact be structured as classes of traffic scheduled using a common calendar queue, or in other ways." ::= { diffServQueue 2 } diffServQEntry OBJECT-TYPE SYNTAX DiffServQEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Queue Table describes a single queue or class of traffic." INDEX { diffServQId } ::= { diffServQTable 1 } DiffServQEntry ::= SEQUENCE { diffServQId IndexInteger, diffServQNext RowPointer, diffServQMinRate RowPointer, diffServQMaxRate RowPointer, diffServQStorage StorageType, diffServQStatus RowStatus } diffServQId OBJECT-TYPE SYNTAX IndexInteger MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that enumerates the Queue entries. Managers obtain new values for row creation in this table by reading diffServQNextFree." ::= { diffServQEntry 1 } diffServQNext OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-create STATUS current DESCRIPTION "This selects the next Differentiated Services Scheduler. The RowPointer must point to a diffServSchedulerEntry. A value of zeroDotZero in this attribute indicates an incomplete diffServQEntry instance. In such a case, the entry has no operational effect, since it has no parameters to give it meaning. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero." ::= { diffServQEntry 2 } diffServQMinRate OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-create STATUS current DESCRIPTION "This RowPointer indicates the diffServMinRateEntry that the scheduler, pointed to by diffServQNext, should use to service this queue. If the row pointed to is zeroDotZero, the minimum rate and priority is unspecified. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero." ::= { diffServQEntry 3 } diffServQMaxRate OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-create STATUS current DESCRIPTION "This RowPointer indicates the diffServMaxRateEntry that the scheduler, pointed to by diffServQNext, should use to service this queue. If the row pointed to is zeroDotZero, the maximum rate is the line speed of the interface. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero." ::= { diffServQEntry 4 } diffServQStorage OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { diffServQEntry 5 } diffServQStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used." ::= { diffServQEntry 6 } -- -- Scheduler Table -- diffServScheduler OBJECT IDENTIFIER ::= { diffServMIBObjects 8 } -- -- A Scheduler Entry represents a packet scheduler, such as a priority -- scheduler or a WFQ scheduler. It provides flexibility for multiple -- scheduling algorithms, each servicing multiple queues, to be used on -- the same logical/physical interface. -- -- Note that upstream queues or schedulers specify several of the -- scheduler's parameters. These must be properly specified if the -- scheduler is to behave as expected. -- -- The diffServSchedulerMaxRate attribute specifies the parameters when -- a scheduler's output is sent to another scheduler. This is used in -- building hierarchical queues or schedulers. -- -- More discussion of the scheduler functional data path element is in -- the Informal Differentiated Services Model section 7.1.2. -- diffServSchedulerNextFree OBJECT-TYPE SYNTAX IndexIntegerNextFree MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an unused value for diffServSchedulerId, or a zero to indicate that none exist." ::= { diffServScheduler 1 } diffServSchedulerTable OBJECT-TYPE SYNTAX SEQUENCE OF DiffServSchedulerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Scheduler Table enumerates packet schedulers. Multiple scheduling algorithms can be used on a given data path, with each algorithm described by one diffServSchedulerEntry." ::= { diffServScheduler 2 } diffServSchedulerEntry OBJECT-TYPE SYNTAX DiffServSchedulerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Scheduler Table describing a single instance of a scheduling algorithm." INDEX { diffServSchedulerId } ::= { diffServSchedulerTable 1 } DiffServSchedulerEntry ::= SEQUENCE { diffServSchedulerId IndexInteger, diffServSchedulerNext RowPointer, diffServSchedulerMethod AutonomousType, diffServSchedulerMinRate RowPointer, diffServSchedulerMaxRate RowPointer, diffServSchedulerStorage StorageType, diffServSchedulerStatus RowStatus } diffServSchedulerId OBJECT-TYPE SYNTAX IndexInteger MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that enumerates the Scheduler entries. Managers obtain new values for row creation in this table by reading diffServSchedulerNextFree." ::= { diffServSchedulerEntry 1 } diffServSchedulerNext OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-create STATUS current DESCRIPTION "This selects the next Differentiated Services Functional Data Path Element to handle traffic for this data path. This normally is null (zeroDotZero), or points to a diffServSchedulerEntry or a diffServQEntry. However, this RowPointer may also point to an instance of: diffServClfrEntry, diffServMeterEntry, diffServActionEntry, diffServAlgDropEntry. It would point another diffServSchedulerEntry when implementing multiple scheduler methods for the same data path, such as having one set of queues scheduled by WRR and that group participating in a priority scheduling system in which other queues compete with it in that way. It might also point to a second scheduler in a hierarchical scheduling system. If the row pointed to is zeroDotZero, no further Differentiated Services treatment is performed on traffic of this data path. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero." DEFVAL { zeroDotZero } ::= { diffServSchedulerEntry 2 } diffServSchedulerMethod OBJECT-TYPE SYNTAX AutonomousType MAX-ACCESS read-create STATUS current DESCRIPTION "The scheduling algorithm used by this Scheduler. zeroDotZero indicates that this is unknown. Standard values for generic algorithms: diffServSchedulerPriority, diffServSchedulerWRR, and diffServSchedulerWFQ are specified in this MIB; additional values may be further specified in other MIBs." ::= { diffServSchedulerEntry 3 } diffServSchedulerMinRate OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-create STATUS current DESCRIPTION "This RowPointer indicates the entry in diffServMinRateTable which indicates the priority or minimum output rate from this scheduler. This attribute is used only when there is more than one level of scheduler. When it has the value zeroDotZero, it indicates that no minimum rate or priority is imposed. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero." DEFVAL { zeroDotZero } ::= { diffServSchedulerEntry 4 } diffServSchedulerMaxRate OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-create STATUS current DESCRIPTION "This RowPointer indicates the entry in diffServMaxRateTable which indicates the maximum output rate from this scheduler. When more than one maximum rate applies (eg, when a multi-rate shaper is in view), it points to the first of those rate entries. This attribute is used only when there is more than one level of scheduler. When it has the value zeroDotZero, it indicates that no maximum rate is imposed. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero." DEFVAL { zeroDotZero } ::= { diffServSchedulerEntry 5 } diffServSchedulerStorage OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { diffServSchedulerEntry 6 } diffServSchedulerStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used." ::= { diffServSchedulerEntry 7 } -- -- OIDs for diffServTBParamType definitions. -- diffServSchedulers OBJECT IDENTIFIER ::= { diffServMIBAdmin 2 } diffServSchedulerPriority OBJECT-IDENTITY STATUS current DESCRIPTION "For use with diffServSchedulerMethod to indicate the Priority scheduling method. This is defined as an algorithm in which the presence of data in a queue or set of queues absolutely precludes dequeue from another queue or set of queues of lower priority. Note that attributes from diffServMinRateEntry of the queues/schedulers feeding this scheduler are used when determining the next packet to schedule." ::= { diffServSchedulers 1 } diffServSchedulerWRR OBJECT-IDENTITY STATUS current DESCRIPTION "For use with diffServSchedulerMethod to indicate the Weighted Round Robin scheduling method, defined as any algorithm in which a set of queues are visited in a fixed order, and varying amounts of traffic are removed from each queue in turn to implement an average output rate by class. Notice attributes from diffServMinRateEntry of the queues/schedulers feeding this scheduler are used when determining the next packet to schedule." ::= { diffServSchedulers 2 } diffServSchedulerWFQ OBJECT-IDENTITY STATUS current DESCRIPTION "For use with diffServSchedulerMethod to indicate the Weighted Fair Queuing scheduling method, defined as any algorithm in which a set of queues are conceptually visited in some order, to implement an average output rate by class. Notice attributes from diffServMinRateEntry of the queues/schedulers feeding this scheduler are used when determining the next packet to schedule." ::= { diffServSchedulers 3 } -- -- Minimum Rate Parameters Table -- -- The parameters used by a scheduler for its inputs or outputs are -- maintained separately from the Queue or Scheduler table entries for -- reusability reasons and so that they may be used by both queues and -- schedulers. This follows the approach for separation of data path -- elements from parameterization that is used throughout this MIB. -- Use of these Minimum Rate Parameter Table entries by Queues and -- Schedulers allows the modeling of hierarchical scheduling systems. -- -- Specifically, a Scheduler has one or more inputs and one output. -- Any queue feeding a scheduler, or any scheduler which feeds a second -- scheduler, might specify a minimum transfer rate by pointing to an -- Minimum Rate Parameter Table entry. -- -- The diffServMinRatePriority/Abs/Rel attributes are used as -- parameters to the work-conserving portion of a scheduler: -- "work-conserving" implies that the scheduler can continue to emit -- data as long as there is data available at its input(s). This has -- the effect of guaranteeing a certain priority relative to other -- scheduler inputs and/or a certain minimum proportion of the -- available output bandwidth. Properly configured, this means a -- certain minimum rate, which may be exceeded should traffic be -- available should there be spare bandwidth after all other classes -- have had opportunities to consume their own minimum rates. -- diffServMinRateNextFree OBJECT-TYPE SYNTAX IndexIntegerNextFree MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an unused value for diffServMinRateId, or a zero to indicate that none exist." ::= { diffServScheduler 3 } diffServMinRateTable OBJECT-TYPE SYNTAX SEQUENCE OF DiffServMinRateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Minimum Rate Parameters Table enumerates individual sets of scheduling parameter that can be used/reused by Queues and Schedulers." ::= { diffServScheduler 4 } diffServMinRateEntry OBJECT-TYPE SYNTAX DiffServMinRateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Minimum Rate Parameters Table describes a single set of scheduling parameters for use by one or more queues or schedulers." INDEX { diffServMinRateId } ::= { diffServMinRateTable 1 } DiffServMinRateEntry ::= SEQUENCE { diffServMinRateId IndexInteger, diffServMinRatePriority Unsigned32, diffServMinRateAbsolute Unsigned32, diffServMinRateRelative Unsigned32, diffServMinRateStorage StorageType, diffServMinRateStatus RowStatus } diffServMinRateId OBJECT-TYPE SYNTAX IndexInteger MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that enumerates the Scheduler Parameter entries. Managers obtain new values for row creation in this table by reading diffServMinRateNextFree." ::= { diffServMinRateEntry 1 } diffServMinRatePriority OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The priority of this input to the associated scheduler, relative to the scheduler's other inputs. A queue or scheduler with a larger numeric value will be served before another with a smaller numeric value." ::= { diffServMinRateEntry 2 } diffServMinRateAbsolute OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) UNITS "kilobits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum absolute rate, in kilobits/sec, that a downstream scheduler element should allocate to this queue. If the value is zero, then there is effectively no minimum rate guarantee. If the value is non-zero, the scheduler will assure the servicing of this queue to at least this rate. Note that this attribute value and that of diffServMinRateRelative are coupled: changes to one will affect the value of the other. They are linked by the following equation, in that setting one will change the other: diffServMinRateRelative = (diffServMinRateAbsolute*1000000)/ifSpeed or, if appropriate: diffServMinRateRelative = diffServMinRateAbsolute/ifHighSpeed" REFERENCE "ifSpeed, ifHighSpeed, Interface MIB, RFC 2863" ::= { diffServMinRateEntry 3 } diffServMinRateRelative OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum rate that a downstream scheduler element should allocate to this queue, relative to the maximum rate of the interface as reported by ifSpeed or ifHighSpeed, in units of 1/1000 of 1. If the value is zero, then there is effectively no minimum rate guarantee. If the value is non-zero, the scheduler will assure the servicing of this queue to at least this rate. Note that this attribute value and that of diffServMinRateAbsolute are coupled: changes to one will affect the value of the other. They are linked by the following equation, in that setting one will change the other: diffServMinRateRelative = (diffServMinRateAbsolute*1000000)/ifSpeed or, if appropriate: diffServMinRateRelative = diffServMinRateAbsolute/ifHighSpeed" REFERENCE "ifSpeed, ifHighSpeed, Interface MIB, RFC 2863" ::= { diffServMinRateEntry 4 } diffServMinRateStorage OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { diffServMinRateEntry 5 } diffServMinRateStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used." ::= { diffServMinRateEntry 6 } -- -- Maximum Rate Parameter Table -- -- The parameters used by a scheduler for its inputs or outputs are -- maintained separately from the Queue or Scheduler table entries for -- reusability reasons and so that they may be used by both queues and -- schedulers. This follows the approach for separation of data path -- elements from parameterization that is used throughout this MIB. -- Use of these Maximum Rate Parameter Table entries by Queues and -- Schedulers allows the modeling of hierarchical scheduling systems. -- -- Specifically, a Scheduler has one or more inputs and one output. -- Any queue feeding a scheduler, or any scheduler which feeds a second -- scheduler, might specify a maximum transfer rate by pointing to a -- Maximum Rate Parameter Table entry. Multi-rate shapers, such as a -- Dual Leaky Bucket algorithm, specify their rates using multiple -- Maximum Rate Parameter Entries with the same diffServMaxRateId but -- different diffServMaxRateLevels. -- -- The diffServMaxRateLevel/Abs/Rel attributes are used as -- parameters to the non-work-conserving portion of a scheduler: -- non-work-conserving implies that the scheduler may sometimes not -- emit a packet, even if there is data available at its input(s). -- This has the effect of limiting the servicing of the queue/scheduler -- input or output, in effect performing shaping of the packet stream -- passing through the queue/scheduler, as described in the Informal -- Differentiated Services Model section 7.2. -- diffServMaxRateNextFree OBJECT-TYPE SYNTAX IndexIntegerNextFree MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an unused value for diffServMaxRateId, or a zero to indicate that none exist." ::= { diffServScheduler 5 } diffServMaxRateTable OBJECT-TYPE SYNTAX SEQUENCE OF DiffServMaxRateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Maximum Rate Parameter Table enumerates individual sets of scheduling parameter that can be used/reused by Queues and Schedulers." ::= { diffServScheduler 6 } diffServMaxRateEntry OBJECT-TYPE SYNTAX DiffServMaxRateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Maximum Rate Parameter Table describes a single set of scheduling parameters for use by one or more queues or schedulers." INDEX { diffServMaxRateId, diffServMaxRateLevel } ::= { diffServMaxRateTable 1 } DiffServMaxRateEntry ::= SEQUENCE { diffServMaxRateId IndexInteger, diffServMaxRateLevel Unsigned32, diffServMaxRateAbsolute Unsigned32, diffServMaxRateRelative Unsigned32, diffServMaxRateThreshold BurstSize, diffServMaxRateStorage StorageType, diffServMaxRateStatus RowStatus } diffServMaxRateId OBJECT-TYPE SYNTAX IndexInteger MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that enumerates the Maximum Rate Parameter entries. Managers obtain new values for row creation in this table by reading diffServMaxRateNextFree." ::= { diffServMaxRateEntry 1 } diffServMaxRateLevel OBJECT-TYPE SYNTAX Unsigned32 (1..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that indicates which level of a multi-rate shaper is being given its parameters. A multi-rate shaper has some number of rate levels. Frame Relay's dual rate specification refers to a 'committed' and an 'excess' rate; ATM's dual rate specification refers to a 'mean' and a 'peak' rate. This table is generalized to support an arbitrary number of rates. The committed or mean rate is level 1, the peak rate (if any) is the highest level rate configured, and if there are other rates they are distributed in monotonically increasing order between them." ::= { diffServMaxRateEntry 2 } diffServMaxRateAbsolute OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) UNITS "kilobits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum rate in kilobits/sec that a downstream scheduler element should allocate to this queue. If the value is zero, then there is effectively no maximum rate limit and that the scheduler should attempt to be work conserving for this queue. If the value is non-zero, the scheduler will limit the servicing of this queue to, at most, this rate in a non-work-conserving manner. Note that this attribute value and that of diffServMaxRateRelative are coupled: changes to one will affect the value of the other. They are linked by the following equation, in that setting one will change the other: diffServMaxRateRelative = (diffServMaxRateAbsolute*1000000)/ifSpeed or, if appropriate: diffServMaxRateRelative = diffServMaxRateAbsolute/ifHighSpeed" REFERENCE "ifSpeed, ifHighSpeed, Interface MIB, RFC 2863" ::= { diffServMaxRateEntry 3 } diffServMaxRateRelative OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum rate that a downstream scheduler element should allocate to this queue, relative to the maximum rate of the interface as reported by ifSpeed or ifHighSpeed, in units of 1/1000 of 1. If the value is zero, then there is effectively no maximum rate limit and the scheduler should attempt to be work conserving for this queue. If the value is non-zero, the scheduler will limit the servicing of this queue to, at most, this rate in a non-work-conserving manner. Note that this attribute value and that of diffServMaxRateAbsolute are coupled: changes to one will affect the value of the other. They are linked by the following equation, in that setting one will change the other: diffServMaxRateRelative = (diffServMaxRateAbsolute*1000000)/ifSpeed or, if appropriate: diffServMaxRateRelative = diffServMaxRateAbsolute/ifHighSpeed" REFERENCE "ifSpeed, ifHighSpeed, Interface MIB, RFC 2863" ::= { diffServMaxRateEntry 4 } diffServMaxRateThreshold OBJECT-TYPE SYNTAX BurstSize UNITS "Bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The number of bytes of queue depth at which the rate of a multi-rate scheduler will increase to the next output rate. In the last conceptual row for such a shaper, this threshold is ignored and by convention is zero." REFERENCE "Adaptive rate Shaper, RFC 2963" ::= { diffServMaxRateEntry 5 } diffServMaxRateStorage OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { diffServMaxRateEntry 6 } diffServMaxRateStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used." ::= { diffServMaxRateEntry 7 } -- -- MIB Compliance statements. -- diffServMIBCompliances OBJECT IDENTIFIER ::= { diffServMIBConformance 1 } diffServMIBGroups OBJECT IDENTIFIER ::= { diffServMIBConformance 2 } diffServMIBFullCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "When this MIB is implemented with support for read-create, then such an implementation can claim full compliance. Such devices can then be both monitored and configured with this MIB." MODULE IF-MIB -- The interfaces MIB, RFC2863 MANDATORY-GROUPS { ifCounterDiscontinuityGroup } MODULE -- This Module MANDATORY-GROUPS { diffServMIBDataPathGroup, diffServMIBClfrGroup, diffServMIBClfrElementGroup, diffServMIBMultiFieldClfrGroup, diffServMIBActionGroup, diffServMIBAlgDropGroup, diffServMIBQGroup, diffServMIBSchedulerGroup, diffServMIBMaxRateGroup, diffServMIBMinRateGroup, diffServMIBCounterGroup } GROUP diffServMIBMeterGroup DESCRIPTION "This group is mandatory for devices that implement metering functions." GROUP diffServMIBTBParamGroup DESCRIPTION "This group is mandatory for devices that implement token-bucket metering functions." GROUP diffServMIBDscpMarkActGroup DESCRIPTION "This group is mandatory for devices that implement DSCP-Marking functions." GROUP diffServMIBRandomDropGroup DESCRIPTION "This group is mandatory for devices that implement Random Drop functions." OBJECT diffServDataPathStatus SYNTAX RowStatus { active(1) } WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait and notInService is not required." OBJECT diffServClfrStatus SYNTAX RowStatus { active(1) } WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait and notInService is not required." OBJECT diffServClfrElementStatus SYNTAX RowStatus { active(1) } WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait and notInService is not required." OBJECT diffServMultiFieldClfrAddrType SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) } DESCRIPTION "An implementation is only required to support IPv4 and IPv6 addresses." OBJECT diffServMultiFieldClfrDstAddr SYNTAX InetAddress (SIZE(0|4|16)) DESCRIPTION "An implementation is only required to support IPv4 and globally unique IPv6 addresses." OBJECT diffServAlgDropStatus SYNTAX RowStatus { active(1) } WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait and notInService is not required." OBJECT diffServRandomDropStatus SYNTAX RowStatus { active(1) } WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait and notInService is not required." OBJECT diffServQStatus SYNTAX RowStatus { active(1) } WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait and notInService is not required." OBJECT diffServSchedulerStatus SYNTAX RowStatus { active(1) } WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait and notInService is not required." OBJECT diffServMinRateStatus SYNTAX RowStatus { active(1) } WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait and notInService is not required." OBJECT diffServMaxRateStatus SYNTAX RowStatus { active(1) } WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait and notInService is not required." ::= { diffServMIBCompliances 1 } -- -- Read-Only Compliance -- diffServMIBReadOnlyCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "When this MIB is implemented without support for read-create (i.e. in read-only mode), then such an implementation can claim read-only compliance. Such a device can then be monitored but can not be configured with this MIB." MODULE IF-MIB -- The interfaces MIB, RFC2863 MANDATORY-GROUPS { ifCounterDiscontinuityGroup } MODULE -- This Module MANDATORY-GROUPS { diffServMIBDataPathGroup, diffServMIBClfrGroup, diffServMIBClfrElementGroup, diffServMIBMultiFieldClfrGroup, diffServMIBActionGroup, diffServMIBAlgDropGroup, diffServMIBQGroup, diffServMIBSchedulerGroup, diffServMIBMaxRateGroup, diffServMIBMinRateGroup, diffServMIBCounterGroup } GROUP diffServMIBMeterGroup DESCRIPTION "This group is mandatory for devices that implement metering functions." GROUP diffServMIBTBParamGroup DESCRIPTION "This group is mandatory for devices that implement token-bucket metering functions." GROUP diffServMIBDscpMarkActGroup DESCRIPTION "This group is mandatory for devices that implement DSCP-Marking functions." GROUP diffServMIBRandomDropGroup DESCRIPTION "This group is mandatory for devices that implement Random Drop functions." OBJECT diffServDataPathStart MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServDataPathStorage MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServDataPathStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and active is the only status that needs to be supported." OBJECT diffServClfrNextFree MIN-ACCESS not-accessible DESCRIPTION "Object not needed when diffServClfrTable is implemented read- only" OBJECT diffServClfrStorage MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServClfrStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and active is the only status that needs to be supported." OBJECT diffServClfrElementNextFree MIN-ACCESS not-accessible DESCRIPTION "Object not needed when diffServClfrelementTable is implemented read-only" OBJECT diffServClfrElementPrecedence MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServClfrElementNext MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServClfrElementSpecific MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServClfrElementStorage MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServClfrElementStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and active is the only status that needs to be supported." OBJECT diffServMultiFieldClfrNextFree MIN-ACCESS not-accessible DESCRIPTION "Object is not needed when diffServMultiFieldClfrTable is implemented in read-only mode." OBJECT diffServMultiFieldClfrAddrType SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) } MIN-ACCESS read-only DESCRIPTION "Write access is not required. An implementation is only required to support IPv4 and IPv6 addresses." OBJECT diffServMultiFieldClfrDstAddr SYNTAX InetAddress (SIZE(0|4|16)) MIN-ACCESS read-only DESCRIPTION "Write access is not required. An implementation is only required to support IPv4 and globally unique IPv6 addresses." OBJECT diffServMultiFieldClfrDstPrefixLength MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServMultiFieldClfrSrcAddr MIN-ACCESS read-only DESCRIPTION "Write access is not required. An implementation is only required to support IPv4 and globally unique IPv6 addresses." OBJECT diffServMultiFieldClfrSrcPrefixLength MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServMultiFieldClfrDscp MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServMultiFieldClfrFlowId MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServMultiFieldClfrProtocol MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServMultiFieldClfrDstL4PortMin MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServMultiFieldClfrDstL4PortMax MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServMultiFieldClfrSrcL4PortMin MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServMultiFieldClfrSrcL4PortMax MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServMultiFieldClfrStorage MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServMultiFieldClfrStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required, createAndWait and notInService support is not required." OBJECT diffServMeterNextFree MIN-ACCESS not-accessible DESCRIPTION "Object is not needed when diffServMultiFieldClfrTable is implemented in read-only mode." OBJECT diffServMeterSucceedNext MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServMeterFailNext MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServMeterSpecific MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServMeterStorage MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServMeterStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and active is the only status that needs to be supported." OBJECT diffServTBParamNextFree MIN-ACCESS not-accessible DESCRIPTION "Object is not needed when diffServTBParamTable is implemented in read-only mode." OBJECT diffServTBParamType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServTBParamRate MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServTBParamBurstSize MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServTBParamInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServTBParamStorage MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServTBParamStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and active is the only status that needs to be supported." OBJECT diffServActionNextFree MIN-ACCESS not-accessible DESCRIPTION "Object is not needed when diffServActionTable is implemented in read-only mode." OBJECT diffServActionInterface MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServActionNext MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServActionSpecific MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServActionStorage MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServActionStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and active is the only status that needs to be supported." OBJECT diffServCountActNextFree MIN-ACCESS not-accessible DESCRIPTION "Object is not needed when diffServCountActTable is implemented in read-only mode." OBJECT diffServCountActStorage MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServCountActStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and active is the only status that needs to be supported." OBJECT diffServAlgDropNextFree MIN-ACCESS not-accessible DESCRIPTION "Object is not needed when diffServAlgDropTable is implemented in read-only mode." OBJECT diffServAlgDropType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServAlgDropNext MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServAlgDropQMeasure MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServAlgDropQThreshold MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServAlgDropSpecific MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServAlgDropStorage MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServAlgDropStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and active is the only status that needs to be supported." OBJECT diffServRandomDropNextFree MIN-ACCESS not-accessible DESCRIPTION "Object is not needed when diffServRandomDropTable is implemented in read-only mode." OBJECT diffServRandomDropMinThreshBytes MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServRandomDropMinThreshPkts MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServRandomDropMaxThreshBytes MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServRandomDropMaxThreshPkts MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServRandomDropProbMax MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServRandomDropWeight MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServRandomDropSamplingRate MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServRandomDropStorage MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServRandomDropStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and active is the only status that needs to be supported." OBJECT diffServQNextFree MIN-ACCESS not-accessible DESCRIPTION "Object is not needed when diffServQTable is implemented in read-only mode." OBJECT diffServQNext MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServQMinRate MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServQMaxRate MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServQStorage MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServQStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and active is the only status that needs to be supported." OBJECT diffServSchedulerNextFree MIN-ACCESS not-accessible DESCRIPTION "Object is not needed when diffServSchedulerTable is implemented in read-only mode." OBJECT diffServSchedulerNext MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServSchedulerMethod MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServSchedulerMinRate MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServSchedulerMaxRate MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServSchedulerStorage MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServSchedulerStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and active is the only status that needs to be supported." OBJECT diffServMinRateNextFree MIN-ACCESS not-accessible DESCRIPTION "Object is not needed when diffServMinRateTable is implemented in read-only mode." OBJECT diffServMinRatePriority MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServMinRateAbsolute MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServMinRateRelative MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServMinRateStorage MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServMinRateStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and active is the only status that needs to be supported." OBJECT diffServMaxRateNextFree MIN-ACCESS not-accessible DESCRIPTION "Object is not needed when diffServMaxrateTable is implemented in read-only mode." OBJECT diffServMaxRateAbsolute MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServMaxRateRelative MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServMaxRateThreshold MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServMaxRateStorage MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT diffServMaxRateStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and active is the only status that needs to be supported." ::= { diffServMIBCompliances 2 } diffServMIBDataPathGroup OBJECT-GROUP OBJECTS { diffServDataPathStart, diffServDataPathStorage, diffServDataPathStatus } STATUS current DESCRIPTION "The Data Path Group defines the MIB Objects that describe a functional data path." ::= { diffServMIBGroups 1 } diffServMIBClfrGroup OBJECT-GROUP OBJECTS { diffServClfrNextFree, diffServClfrStorage, diffServClfrStatus } STATUS current DESCRIPTION "The Classifier Group defines the MIB Objects that describe the list the starts of individual classifiers." ::= { diffServMIBGroups 2 } diffServMIBClfrElementGroup OBJECT-GROUP OBJECTS { diffServClfrElementNextFree, diffServClfrElementPrecedence, diffServClfrElementNext, diffServClfrElementSpecific, diffServClfrElementStorage, diffServClfrElementStatus } STATUS current DESCRIPTION "The Classifier Element Group defines the MIB Objects that describe the classifier elements that make up a generic classifier." ::= { diffServMIBGroups 3 } diffServMIBMultiFieldClfrGroup OBJECT-GROUP OBJECTS { diffServMultiFieldClfrNextFree, diffServMultiFieldClfrAddrType, diffServMultiFieldClfrDstAddr, diffServMultiFieldClfrDstPrefixLength, diffServMultiFieldClfrFlowId, diffServMultiFieldClfrSrcAddr, diffServMultiFieldClfrSrcPrefixLength, diffServMultiFieldClfrDscp, diffServMultiFieldClfrProtocol, diffServMultiFieldClfrDstL4PortMin, diffServMultiFieldClfrDstL4PortMax, diffServMultiFieldClfrSrcL4PortMin, diffServMultiFieldClfrSrcL4PortMax, diffServMultiFieldClfrStorage, diffServMultiFieldClfrStatus } STATUS current DESCRIPTION "The Multi-field Classifier Group defines the MIB Objects that describe a classifier element for matching on various fields of an IP and upper-layer protocol header." ::= { diffServMIBGroups 4 } diffServMIBMeterGroup OBJECT-GROUP OBJECTS { diffServMeterNextFree, diffServMeterSucceedNext, diffServMeterFailNext, diffServMeterSpecific, diffServMeterStorage, diffServMeterStatus } STATUS current DESCRIPTION "The Meter Group defines the objects used in describing a generic meter element." ::= { diffServMIBGroups 5 } diffServMIBTBParamGroup OBJECT-GROUP OBJECTS { diffServTBParamNextFree, diffServTBParamType, diffServTBParamRate, diffServTBParamBurstSize, diffServTBParamInterval, diffServTBParamStorage, diffServTBParamStatus } STATUS current DESCRIPTION "The Token-Bucket Meter Group defines the objects used in describing a token bucket meter element." ::= { diffServMIBGroups 6 } diffServMIBActionGroup OBJECT-GROUP OBJECTS { diffServActionNextFree, diffServActionNext, diffServActionSpecific, diffServActionStorage, diffServActionInterface, diffServActionStatus } STATUS current DESCRIPTION "The Action Group defines the objects used in describing a generic action element." ::= { diffServMIBGroups 7 } diffServMIBDscpMarkActGroup OBJECT-GROUP OBJECTS { diffServDscpMarkActDscp } STATUS current DESCRIPTION "The DSCP Mark Action Group defines the objects used in describing a DSCP Marking Action element." ::= { diffServMIBGroups 8 } diffServMIBCounterGroup OBJECT-GROUP OBJECTS { diffServCountActOctets, diffServCountActPkts, diffServAlgDropOctets, diffServAlgDropPkts, diffServAlgRandomDropOctets, diffServAlgRandomDropPkts, diffServCountActStorage, diffServCountActStatus, diffServCountActNextFree } STATUS current DESCRIPTION "A collection of objects providing information specific to packet-oriented network interfaces." ::= { diffServMIBGroups 9 } diffServMIBAlgDropGroup OBJECT-GROUP OBJECTS { diffServAlgDropNextFree, diffServAlgDropType, diffServAlgDropNext, diffServAlgDropQMeasure, diffServAlgDropQThreshold, diffServAlgDropSpecific, diffServAlgDropStorage, diffServAlgDropStatus } STATUS current DESCRIPTION "The Algorithmic Drop Group contains the objects that describe algorithmic dropper operation and configuration." ::= { diffServMIBGroups 10 } diffServMIBRandomDropGroup OBJECT-GROUP OBJECTS { diffServRandomDropNextFree, diffServRandomDropMinThreshBytes, diffServRandomDropMinThreshPkts, diffServRandomDropMaxThreshBytes, diffServRandomDropMaxThreshPkts, diffServRandomDropProbMax, diffServRandomDropWeight, diffServRandomDropSamplingRate, diffServRandomDropStorage, diffServRandomDropStatus } STATUS current DESCRIPTION "The Random Drop Group augments the Algorithmic Drop Group for random dropper operation and configuration." ::= { diffServMIBGroups 11 } diffServMIBQGroup OBJECT-GROUP OBJECTS { diffServQNextFree, diffServQNext, diffServQMinRate, diffServQMaxRate, diffServQStorage, diffServQStatus } STATUS current DESCRIPTION "The Queue Group contains the objects that describe an interface's queues." ::= { diffServMIBGroups 12 } diffServMIBSchedulerGroup OBJECT-GROUP OBJECTS { diffServSchedulerNextFree, diffServSchedulerNext, diffServSchedulerMethod, diffServSchedulerMinRate, diffServSchedulerMaxRate, diffServSchedulerStorage, diffServSchedulerStatus } STATUS current DESCRIPTION "The Scheduler Group contains the objects that describe packet schedulers on interfaces." ::= { diffServMIBGroups 13 } diffServMIBMinRateGroup OBJECT-GROUP OBJECTS { diffServMinRateNextFree, diffServMinRatePriority, diffServMinRateAbsolute, diffServMinRateRelative, diffServMinRateStorage, diffServMinRateStatus } STATUS current DESCRIPTION "The Minimum Rate Parameter Group contains the objects that describe packet schedulers' minimum rate or priority guarantees." ::= { diffServMIBGroups 14 } diffServMIBMaxRateGroup OBJECT-GROUP OBJECTS { diffServMaxRateNextFree, diffServMaxRateAbsolute, diffServMaxRateRelative, diffServMaxRateThreshold, diffServMaxRateStorage, diffServMaxRateStatus } STATUS current DESCRIPTION "The Maximum Rate Parameter Group contains the objects that describe packet schedulers' maximum rate guarantees." ::= { diffServMIBGroups 15 } END