-- ================================================================== -- Copyright (C) 2011 by HUAWEI TECHNOLOGIES. All rights reserved. -- Description: This MIB is used for defining the HUAWEI private -- extended Multiprotocol Label Switching (MPLS) MIB -- object. All MIB objects are used to describe private -- managed objects and trap definitions for MPLS. -- Reference: -- Version: V2.07 -- History: -- V2.07 WangHonglei, 2012-07-05, revision -- ================================================================== -- ================================================================== -- -- Variables and types be imported -- -- ================================================================== HUAWEI-MPLS-EXTEND-MIB DEFINITIONS ::= BEGIN IMPORTS hwDatacomm FROM HUAWEI-MIB ifIndex, ifName FROM IF-MIB MplsIndexType FROM MPLS-LSR-STD-MIB MplsTunnelIndex, MplsTunnelInstanceIndex, MplsExtendedTunnelId FROM MPLS-TC-STD-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF Integer32, Unsigned32, Counter32, BITS, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI mplsTunnelAdminStatus, mplsTunnelOperStatus FROM MPLS-TE-STD-MIB; -- 1.3.6.1.4.1.2011.5.25.121 hwMplsExtendMib MODULE-IDENTITY LAST-UPDATED "201207052025Z" ORGANIZATION "Multiprotocol Label Switching (MPLS) Working Group" CONTACT-INFO "MPLS Team Huawei Technologies co.,Ltd. Huawei Bld.,NO.3 Xinxi Rd., Shang-Di Information Industry Base, Hai-Dian District Beijing P.R. China http://www.huawei.com Zip:100085 Email:support@huawei.com " DESCRIPTION "This MIB is used for defining the HUAWEI private extended Multiprotocol Label Switching (MPLS) MIB object. All MIB objects are used to describe private managed objects and trap definitions for MPLS." -- Revision history REVISION "201207052025Z" DESCRIPTION "V2.07, modify the description of hwMplsLspTotalCountExceed." REVISION "201206081405Z" DESCRIPTION "V2.06, add traps: hwmplslspThresholdexceed, hwmplslspthresholdexceedclear, hwmplslsptotalcountexceed, hwmplslsptotalcountexceedclear." REVISION "201206051100Z" DESCRIPTION "V2.05, add traps: hwmplstunneldelete; modify hwmplsoamtunnellock to hwmplsoamlocallock; modify hwmplstunnellockrecovery to hwmplslocallockrecovery." REVISION "201205091100Z" DESCRIPTION "V2.05, add traps: from hwMplsRingWestOamLoss to hwMplsRingEastOamUnexpectedMepClear." REVISION "201205041100Z" DESCRIPTION "V2.04, add traps: hwMplsoamTunnellock, hwMplsoamTunnellockRecovery." REVISION "201111291100Z" DESCRIPTION "V2.03, add traps: hwMplsExtTunnelDown, hwMplsExtTunnelDownClear." REVISION "201111181100Z" DESCRIPTION "V2.02, add traps: hwMplsTunnelBBSwitch, hwMplsTunnelBBResume." REVISION "201110241100Z" DESCRIPTION "V2.01, add traps: hwMplsTeAutoTunnelDownClear, hwMplsTeAutoTunnelPrimaryDownClear." REVISION "201107301100Z" DESCRIPTION "V2.00, delete Defval clause in these nodes: hwMplsTunnelDownReason, hwMplsTunnelLspType." REVISION "201011231155Z" DESCRIPTION "V1.02, modified the MIB description." REVISION "201007131535Z" DESCRIPTION "V1.01, modified the MIB description." REVISION "200606301554Z" DESCRIPTION "V1.00, initial LSPM MIB." ::= { hwDatacomm 121 } -- -- Node definitions -- -- 1.3.6.1.4.1.2011.5.25.121.1 hwMplsExtendMibTunnel OBJECT IDENTIFIER ::= { hwMplsExtendMib 1 } -- 1.3.6.1.4.1.2011.5.25.121.1.1 hwMplsTunnelTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMplsTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A tunnel needs to be uniquely identified across an MPLS network. Indexes hwMplsTunnelIndex and hwMplsTunnelInstance uniquely identify a tunnel on the LSR originating the tunnel. hwMplsTunnelIngressLSRId uniquely identifies a tunnel across an MPLS network. The last index hwMplsTunnelEgressLSRId is useful in identifying all instances of a tunnel that are terminated on the same egress LSR. The indexes of this table are hwMplsTunnelIndex, hwMplsTunnelInstance, hwMplsTunnelIngressLSRId and hwMplsTunnelEgressLSRId." ::= { hwMplsExtendMibTunnel 1 } -- 1.3.6.1.4.1.2011.5.25.121.1.1.1 hwMplsTunnelEntry OBJECT-TYPE SYNTAX HwMplsTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A tunnel needs to be uniquely identified across an MPLS network. Indexes hwMplsTunnelIndex and hwMplsTunnelInstance uniquely identify a tunnel on the LSR originating the tunnel. hwMplsTunnelIngressLSRId uniquely identifies a tunnel across an MPLS network. The last index hwMplsTunnelEgressLSRId is useful in identifying all instances of a tunnel that are terminated on the same egress LSR. The indexes of this entry are hwMplsTunnelIndex, hwMplsTunnelInstance, hwMplsTunnelIngressLSRId and hwMplsTunnelEgressLSRId." REFERENCE "1. RFC 2863 - The Interfaces Group MIB, McCloghrie, K., and F. Kastenholtz, June 2000 " INDEX { hwMplsTunnelIndex, hwMplsTunnelInstance, hwMplsTunnelIngressLSRId, hwMplsTunnelEgressLSRId } ::= { hwMplsTunnelTable 1 } HwMplsTunnelEntry ::= SEQUENCE { hwMplsTunnelIndex MplsTunnelIndex, hwMplsTunnelInstance MplsTunnelInstanceIndex, hwMplsTunnelIngressLSRId MplsExtendedTunnelId, hwMplsTunnelEgressLSRId MplsExtendedTunnelId, hwMplsTunnelClassType INTEGER, hwMplsTunnelBandwidth Integer32, hwMplsTunnelAdminStatus INTEGER, hwMplsTunnelOperStatus INTEGER, hwMplsTunnelSessionAttr BITS, hwMplsTunnelFrrSetupPrio Unsigned32, hwMplsTunnelFrrHoldingPrio Unsigned32, hwMplsTunnelFrrBandwidth Unsigned32, hwMplsTunnelFrrSwitchover Counter32, hwMplsTunnelFrrBypassTableIndex Unsigned32, hwMplsTunnelFrrARHopTableIndex Unsigned32, hwMplsTunnelName SnmpAdminString, hwMplsTunnelIfIndex Unsigned32, hwMplsTunnelPreBandwidth Unsigned32, hwMplsTunnelNextBandwidth Unsigned32, hwMplsTunnelCt0Bandwidth Unsigned32, hwMplsTunnelCt1Bandwidth Unsigned32, hwMplsTunnelCt2Bandwidth Unsigned32, hwMplsTunnelCt3Bandwidth Unsigned32, hwMplsTunnelCt4Bandwidth Unsigned32, hwMplsTunnelCt5Bandwidth Unsigned32, hwMplsTunnelCt6Bandwidth Unsigned32, hwMplsTunnelCt7Bandwidth Unsigned32, hwMplsTunnelLspType INTEGER, hwMplsTunnelInterfaceName SnmpAdminString, hwMplsTunnelSignalProto INTEGER, hwMplsTunnelType INTEGER } -- 1.3.6.1.4.1.2011.5.25.121.1.1.1.1 hwMplsTunnelIndex OBJECT-TYPE SYNTAX MplsTunnelIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. When the MPLS signalling protocol is rsvp(2), this value equals to the value signaled in the Tunnel ID of the SESSION object. When the MPLS signalling protocol is crldp(3), this value equals to the value signaled in the LSP ID. Reference to MPLS-TE-STD-MIB." ::= { hwMplsTunnelEntry 1 } -- 1.3.6.1.4.1.2011.5.25.121.1.1.1.2 hwMplsTunnelInstance OBJECT-TYPE SYNTAX MplsTunnelInstanceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Uniquely identifies a particular instance of a tunnel between a pair of ingress and egress LSRs. It is used to identify multiple instances of tunnels for backup and parallel tunnels. When the MPLS signaling protocol is rsvp(2), this value equals to the LSP ID of the Sender Template object. When the signaling protocol is crldp(3) there is no equivalent signaling object. Reference to MPLS-TE-STD-MIB." ::= { hwMplsTunnelEntry 2 } -- 1.3.6.1.4.1.2011.5.25.121.1.1.1.3 hwMplsTunnelIngressLSRId OBJECT-TYPE SYNTAX MplsExtendedTunnelId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the ingress LSR ID of this tunnel. When the MPLS signalling protocol is rsvp(2), this value equals to the Tunnel Sender Address in the Sender Template object and may equal to the Extended Tunnel ID in the SESSION object. When the MPLS signalling protocol is crldp(3), this value equals to the Ingress LSR Router ID in the LSPID TLV object. Reference to MPLS-TE-STD-MIB." ::= { hwMplsTunnelEntry 3 } -- 1.3.6.1.4.1.2011.5.25.121.1.1.1.4 hwMplsTunnelEgressLSRId OBJECT-TYPE SYNTAX MplsExtendedTunnelId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the egress LSR ID of this tunnel. Reference to MPLS-TE-STD-MIB." ::= { hwMplsTunnelEntry 4 } -- 1.3.6.1.4.1.2011.5.25.121.1.1.1.5 hwMplsTunnelClassType OBJECT-TYPE SYNTAX INTEGER { bc0(1), bc1(2), invalidValue(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the bandwidth type used by this tunnel. Options: 1. bc0(1) -indicates the bandwidth type is bc0. 2. bc1(2) -indicates the bandwidth type is bc1. 3. invalidValue(3) -indicates the invalid value. " ::= { hwMplsTunnelEntry 5 } -- 1.3.6.1.4.1.2011.5.25.121.1.1.1.6 hwMplsTunnelBandwidth OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the bandwidth used by this tunnel. Unit: kbit/s " ::= { hwMplsTunnelEntry 6 } -- 1.3.6.1.4.1.2011.5.25.121.1.1.1.7 hwMplsTunnelAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the management status of this tunnel.Reference to MPLS-TE-STD-MIB. Options: 1. up(1) -indicates the management status of this tunnel is up. 2. down(2) -indicates the management status of this tunnel is down. 3. testing(3) -indicates the tunnel is used in some test mode. " ::= { hwMplsTunnelEntry 7 } -- 1.3.6.1.4.1.2011.5.25.121.1.1.1.8 hwMplsTunnelOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3), unknown(4), dormant(5), notPresent(6), lowerLayerDown(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the actual operational status of this tunnel, which is but not limited to the status of this tunnel of a certain period.Reference to MPLS-TE-STD-MIB. Options: 1. up(1) -indicates that the operational status of this tunnel is up. 2. down(2) -indicates that the operational status of this tunnel is down. 3. testing(3) -indicates that the tunnel is used in some test mode. 4. unknown(4) -indicates the invalid value. 5. dormant(5) -indicates that the status cannot be determined. 6. notPresent(6) -indicates that some component is missing 7. lowerLayerDown(7) -indicates the Down state due to the state of lower layer interfaces. " ::= { hwMplsTunnelEntry 8 } -- 1.3.6.1.4.1.2011.5.25.121.1.1.1.9 hwMplsTunnelSessionAttr OBJECT-TYPE SYNTAX BITS { localProtectionDesired(0), nodeProtectionDesired(1), bandwidthProtectionDesired(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates protection types desired by the primary tunnel, such as node protection, link protection or bandwidth protection. Options: 1. localProtectionDesired(0) -indicates link protection. 2. nodeProtectionDesired(1) -indicates node protection. 3. bandwidthProtectionDesired(2) -indicates bandwidth protection. " ::= { hwMplsTunnelEntry 9 } -- 1.3.6.1.4.1.2011.5.25.121.1.1.1.10 hwMplsTunnelFrrSetupPrio OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the setup PRI of auto-bypass tunnel. Range: 0-7 Default: 7 " ::= { hwMplsTunnelEntry 10 } -- 1.3.6.1.4.1.2011.5.25.121.1.1.1.11 hwMplsTunnelFrrHoldingPrio OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the holding PRI of auto-bypass tunnel. Range: 0-7 Default: 7 " ::= { hwMplsTunnelEntry 11 } -- 1.3.6.1.4.1.2011.5.25.121.1.1.1.12 hwMplsTunnelFrrBandwidth OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the protecting bandwidth of auto-bypass tunnel. Its value is defined by the configuration on the primary tunnel. Unit: kbit/s" ::= { hwMplsTunnelEntry 12 } -- 1.3.6.1.4.1.2011.5.25.121.1.1.1.13 hwMplsTunnelFrrSwitchover OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates FRR switching times" ::= { hwMplsTunnelEntry 13 } -- 1.3.6.1.4.1.2011.5.25.121.1.1.1.14 hwMplsTunnelFrrBypassTableIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the index of the bypass tunnel table, that is, the LSP ID of the bypass tunnel. The bypass table shows interfaces protected by specified bypass tunnel." ::= { hwMplsTunnelEntry 14 } -- 1.3.6.1.4.1.2011.5.25.121.1.1.1.15 hwMplsTunnelFrrARHopTableIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the table index of the protection type adopted by each hop of the primary tunnel." ::= { hwMplsTunnelEntry 15 } hwMplsTunnelName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the tunnel name. The name can refer to the tunnel on the console port of the LSR. If mplsTunnelIsIf is set to True, the IfName of the interface corresponding to this tunnel should have a value equal to hwMplsTunnelName. Reference to the description of IfName in RFC 2863." ::= { hwMplsTunnelEntry 16 } hwMplsTunnelIfIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the interface index of the tunnel. It uniquely identifies the tunnel name." ::= { hwMplsTunnelEntry 17 } hwMplsTunnelPreBandwidth OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the original bandwidth of the tunnel when the tunnel is in the Modify state. Unit: kbit/s" ::= { hwMplsTunnelEntry 18 } hwMplsTunnelNextBandwidth OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the bandwidth of the tunnel that is to be changed when the tunnel is in the Modify state. Unit: kbit/s" ::= { hwMplsTunnelEntry 19 } hwMplsTunnelCt0Bandwidth OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The bandwidth of Class-Type 0 (CT0) in this tunnel, in kbit/s. If all CT bandwidths are 0s, it means that this tunnel's Class-Type is CT0, and bandwidth is 0 kbit/s. Unit: kbit/s" ::= { hwMplsTunnelEntry 20 } hwMplsTunnelCt1Bandwidth OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The bandwidth of Class-Type 1 (CT1) in this tunnel, in kbit/s. Unit: kbit/s" ::= { hwMplsTunnelEntry 21 } hwMplsTunnelCt2Bandwidth OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The bandwidth of Class-Type 2 (CT2) in this tunnel, in kbit/s. Unit: kbit/s" ::= { hwMplsTunnelEntry 22 } hwMplsTunnelCt3Bandwidth OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The bandwidth of Class-Type 3 (CT3) in this tunnel, in kbit/s. Unit: kbit/s" ::= { hwMplsTunnelEntry 23 } hwMplsTunnelCt4Bandwidth OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The bandwidth of Class-Type 4 (CT4) in this tunnel, in kbit/s. Unit: kbit/s" ::= { hwMplsTunnelEntry 24 } hwMplsTunnelCt5Bandwidth OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The bandwidth of Class-Type 5 (CT5) in this tunnel, in kbit/s. Unit: kbit/s" ::= { hwMplsTunnelEntry 25 } hwMplsTunnelCt6Bandwidth OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The bandwidth of Class-Type 6 (CT6) in this tunnel, in kbit/s. Unit: kbit/s" ::= { hwMplsTunnelEntry 26 } hwMplsTunnelCt7Bandwidth OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The bandwidth of Class-Type 7 (CT7) in this tunnel, in kbit/s. Unit: kbit/s" ::= { hwMplsTunnelEntry 27 } hwMplsTunnelLspType OBJECT-TYPE SYNTAX INTEGER { invalid(0), primary(1), primaryModifing(2), hotStandby(3), hotStandbyModifing(4), ordinary(5), ordinaryModifing(6), bestEffort(7), bestEffortModifing(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is meaningful only at the ingress of the tunnel. It indicates LSP types. Options: 0. invalid(0) -indicates that the LSP type is invalid, the possible cause is that the LSP is not created at an ingress. 1. primary(1) -indicates the primary LSP 2. primaryModifing(2) -indicates the LSP that will replace the primary LSP 3. hotStandby(3) -indicates the hot-standby LSP 4. hotStandbyModifing(4) -indicates the LSP that will replace the hot-standby LSP 5. ordinary(5) -indicates the ordinary LSP 6. ordinaryModifing(6) -indicates the LSP that will replace the ordinary LSP 7. bestEffort(7) -indicates the Best-Effort LSP 8. bestEffortModifing(8) -indicates the LSP that will replace the Best-Effort LSP Modifying LSPs are created when users modify the make-before-break attribute of the corresponding LSP types. After being created, modifying LSPs replace the corresponding LSPs to transmit traffic. " ::= { hwMplsTunnelEntry 28 } hwMplsTunnelInterfaceName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the tunnel interface name. The object is only valid at the ingress." ::= { hwMplsTunnelEntry 29 } -- 1.3.6.1.4.1.2011.5.25.121.1.1.1.30 hwMplsTunnelSignalProto OBJECT-TYPE SYNTAX INTEGER { rsvpTE(1), static(2), staticCR(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the signal protocol of this tunnel" ::= { hwMplsTunnelEntry 30 } -- 1.3.6.1.4.1.2011.5.25.121.1.1.1.31 hwMplsTunnelType OBJECT-TYPE SYNTAX INTEGER { invalid(1), primaryTunnel(2), bypassTunnel(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is meaningful only at the ingress of the tunnel. It indicates tunnel types. Options: 1. invalid(1) -indicates that the tunnel type is invalid, the possible cause is that it is not ingress node of this tunnel 2. primaryTunnel(2) -indicates that this is a primary tunnel 3. bypassTunnel(3) -indicates that this is a bypass tunnel " ::= { hwMplsTunnelEntry 31 } -- 1.3.6.1.4.1.2011.5.25.121.1.2 hwTunnelFrrBypassTable OBJECT-TYPE SYNTAX SEQUENCE OF HwTunnelFrrBypassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the bypass tunnel. The indexes of this table are hwTunnelFrrBypassListIndex and hwTunnelFrrBypassIndex." ::= { hwMplsExtendMibTunnel 2 } -- 1.3.6.1.4.1.2011.5.25.121.1.2.1 hwTunnelFrrBypassEntry OBJECT-TYPE SYNTAX HwTunnelFrrBypassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the bypass tunnel.The indexes of this entry are hwTunnelFrrBypassListIndex and hwTunnelFrrBypassIndex." INDEX { hwTunnelFrrBypassListIndex, hwTunnelFrrBypassIndex } ::= { hwTunnelFrrBypassTable 1 } HwTunnelFrrBypassEntry ::= SEQUENCE { hwTunnelFrrBypassListIndex Unsigned32, hwTunnelFrrBypassIndex Unsigned32, hwTunnelFrrBypassProtIfIndex Unsigned32 } -- 1.3.6.1.4.1.2011.5.25.121.1.2.1.1 hwTunnelFrrBypassListIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of the bypass tunnel table, that is, the LSP ID of the bypass tunnel." ::= { hwTunnelFrrBypassEntry 1 } -- 1.3.6.1.4.1.2011.5.25.121.1.2.1.2 hwTunnelFrrBypassIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of the bypass tunnel interface." ::= { hwTunnelFrrBypassEntry 2 } -- 1.3.6.1.4.1.2011.5.25.121.1.2.1.3 hwTunnelFrrBypassProtIfIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the index of the interface protected by the bypass tunnel." ::= { hwTunnelFrrBypassEntry 3 } -- 1.3.6.1.4.1.2011.5.25.121.1.3 hwTunnelFrrARHopTable OBJECT-TYPE SYNTAX SEQUENCE OF HwTunnelFrrARHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the FrrARHopTable, which will show every hop's frr protect information of the tunnel. The indexes of this table are hwTunnelFrrARHopListIndex and hwTunnelFrrARHopIndex." ::= { hwMplsExtendMibTunnel 3 } -- 1.3.6.1.4.1.2011.5.25.121.1.3.1 hwTunnelFrrARHopEntry OBJECT-TYPE SYNTAX HwTunnelFrrARHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the FrrARHopTable, which will show every hop's frr protect information of the tunnel. The indexes of this entry are hwTunnelFrrARHopListIndex and hwTunnelFrrARHopIndex." INDEX { hwTunnelFrrARHopListIndex, hwTunnelFrrARHopIndex } ::= { hwTunnelFrrARHopTable 1 } HwTunnelFrrARHopEntry ::= SEQUENCE { hwTunnelFrrARHopListIndex Unsigned32, hwTunnelFrrARHopIndex Unsigned32, hwTunnelFrrARHopProtDesired BITS, hwTunnelFrrARHopProtActual BITS } -- 1.3.6.1.4.1.2011.5.25.121.1.3.1.1 hwTunnelFrrARHopListIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the table index of each hop along the primary tunnel." ::= { hwTunnelFrrARHopEntry 1 } -- 1.3.6.1.4.1.2011.5.25.121.1.3.1.2 hwTunnelFrrARHopIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of each hop along the primary tunnel." ::= { hwTunnelFrrARHopEntry 2 } -- 1.3.6.1.4.1.2011.5.25.121.1.3.1.3 hwTunnelFrrARHopProtDesired OBJECT-TYPE SYNTAX BITS { localProtection(0), nodeProtection(1), bandwidthProtection(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the FRR protection types desired by the primary tunnel interface, including: 0: link protection, 1: node protection, 2: bandwidth protection " ::= { hwTunnelFrrARHopEntry 3 } -- 1.3.6.1.4.1.2011.5.25.121.1.3.1.4 hwTunnelFrrARHopProtActual OBJECT-TYPE SYNTAX BITS { localProtection(0), nodeProtection(1), bandwidthProtection(2), protectionInuse(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the actual FRR protection types of the primary tunnel interface, including: 0: link protection, 1: node protection, 2: bandwidth protection, 3: primary tunnel protection in use " ::= { hwTunnelFrrARHopEntry 4 } -- 1.3.6.1.4.1.2011.5.25.121.1.4 hwTunnelFrrRouteDBTable OBJECT-TYPE SYNTAX SEQUENCE OF HwTunnelFrrRouteDBEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the primary tunnel is protected by which bypass tunnel. The indexes of this table are hwTunnelFrrRouteDBTunnelIndex, hwTunnelFrrRouteDBTunnelInstance, hwTunnelFrrRouteDBTunnelIngressLSRId and hwTunnelFrrRouteDBTunnelEngressLSRId." ::= { hwMplsExtendMibTunnel 4 } -- 1.3.6.1.4.1.2011.5.25.121.1.4.1 hwTunnelFrrRouteDBEntry OBJECT-TYPE SYNTAX HwTunnelFrrRouteDBEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the primary tunnel is protected by which bypass tunnel. The indexes of this entry are hwTunnelFrrRouteDBTunnelIndex, hwTunnelFrrRouteDBTunnelInstance, hwTunnelFrrRouteDBTunnelIngressLSRId and hwTunnelFrrRouteDBTunnelEngressLSRId." INDEX { hwTunnelFrrRouteDBTunnelIndex, hwTunnelFrrRouteDBTunnelInstance, hwTunnelFrrRouteDBTunnelIngressLSRId, hwTunnelFrrRouteDBTunnelEngressLSRId } ::= { hwTunnelFrrRouteDBTable 1 } HwTunnelFrrRouteDBEntry ::= SEQUENCE { hwTunnelFrrRouteDBTunnelIndex Unsigned32, hwTunnelFrrRouteDBTunnelInstance Unsigned32, hwTunnelFrrRouteDBTunnelIngressLSRId Unsigned32, hwTunnelFrrRouteDBTunnelEngressLSRId Unsigned32, hwTunnelFrrRouteDBBypassIfIndex Unsigned32, hwTunnelFrrRouteDBInnerLabel Unsigned32 } -- 1.3.6.1.4.1.2011.5.25.121.1.4.1.1 hwTunnelFrrRouteDBTunnelIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifies the index of the primary. Manager obtains new index values for row creation in this table by reading mplsTunnelIndexNext. When the MPLS signaling protocol is rsvp(2), this value equals to the value signaled in the Tunnel ID of the SESSION object. When the MPLS signaling protocol is crldp(3), this value equals to the value signaled in the LSP ID. Reference to MPLS-TE-STD-MIB." ::= { hwTunnelFrrRouteDBEntry 1 } -- 1.3.6.1.4.1.2011.5.25.121.1.4.1.2 hwTunnelFrrRouteDBTunnelInstance OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Uniquely identifies a particular instance of a tunnel between a pair of ingress and egress LSRs. It is the object identifies multiple instances of tunnels for the purposes of backup and parallel tunnels. When the MPLS signaling protocol is rsvp(2), this value equals to the LSP ID of the Sender Template object. When the signaling protocol is crldp(3), there is no equivalent signaling object. Reference to MPLS-TE-STD-MIB." ::= { hwTunnelFrrRouteDBEntry 2 } -- 1.3.6.1.4.1.2011.5.25.121.1.4.1.3 hwTunnelFrrRouteDBTunnelIngressLSRId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifies the ingress LSR ID of the primary tunnel. When the MPLS signalling protocol is rsvp(2),LSR ID equals to the Tunnel Sender Address in the Sender Template object or the Extended Tunnel Id in the SESSION object. When the MPLS signalling protocol is crldp(3), LSR ID equals to the Ingress LSR Router ID in the LSPID TLV object." ::= { hwTunnelFrrRouteDBEntry 3 } -- 1.3.6.1.4.1.2011.5.25.121.1.4.1.4 hwTunnelFrrRouteDBTunnelEngressLSRId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifies the egress LSR ID of the primary tunnel. Reference to MPLS-TE-STD-MIB." ::= { hwTunnelFrrRouteDBEntry 4 } -- 1.3.6.1.4.1.2011.5.25.121.1.4.1.5 hwTunnelFrrRouteDBBypassIfIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the interface index of the bypass tunnel." ::= { hwTunnelFrrRouteDBEntry 5 } -- 1.3.6.1.4.1.2011.5.25.121.1.4.1.6 hwTunnelFrrRouteDBInnerLabel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the inner label of the primary tunnel and bypass tunnel." ::= { hwTunnelFrrRouteDBEntry 6 } -- 1.3.6.1.4.1.2011.5.25.121.1.5 hwStaticLspTable OBJECT-TYPE SYNTAX SEQUENCE OF HwStaticLspEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A static LSP is created by a network administrator by using static MPLS. Note that only point-to-point static LSP segments are supported. Each static MPLS LSP can thus have one out-segment originating at this LSR and/or one in-segment terminating at this LSR. The indexes of this table are hwStaticLspIndex, hwStaticLspInSegmentIndex, and hwStaticLspOutSegmentIndex." ::= { hwMplsExtendMibTunnel 5 } -- 1.3.6.1.4.1.2011.5.25.121.1.5.1 hwStaticLspEntry OBJECT-TYPE SYNTAX HwStaticLspEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A static LSP is created by a network administrator by using static MPLS. Note that only point-to-point static LSP segments are supported. Each static MPLS LSP can thus have one out-segment originating at this LSR and/or one in-segment terminating at this LSR. The indexes of this entry are hwStaticLspIndex, hwStaticLspInSegmentIndex, and hwStaticLspOutSegmentIndex." INDEX { hwStaticLspIndex, hwStaticLspInSegmentIndex, hwStaticLspOutSegmentIndex } ::= { hwStaticLspTable 1 } HwStaticLspEntry ::= SEQUENCE { hwStaticLspIndex MplsIndexType, hwStaticLspInSegmentIndex MplsIndexType, hwStaticLspOutSegmentIndex MplsIndexType, hwStaticLspOwner INTEGER, hwStaticLspName SnmpAdminString, hwStaticLspStatus INTEGER, hwStaticLspClassType INTEGER, hwStaticLspBandwidth Unsigned32 } -- 1.3.6.1.4.1.2011.5.25.121.1.5.1.1 hwStaticLspIndex OBJECT-TYPE SYNTAX MplsIndexType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of the static LSP. If the string is 0x00, it means that the index is invalid." ::= { hwStaticLspEntry 1 } -- 1.3.6.1.4.1.2011.5.25.121.1.5.1.2 hwStaticLspInSegmentIndex OBJECT-TYPE SYNTAX MplsIndexType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the incoming label index of the static LSP/CR-LSP. If the string is 0x00, it means that the index is invalid. In this case, no corresponding mplsInSegmentEntry exists. Reference to MPLS-LSR-STD-MIB." ::= { hwStaticLspEntry 2 } -- 1.3.6.1.4.1.2011.5.25.121.1.5.1.3 hwStaticLspOutSegmentIndex OBJECT-TYPE SYNTAX MplsIndexType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the outgoing index of the static LSP/CR-LSP. If the entry is used to identify the incoming node or intermediate node of the LSP, this object cannot be set to the string 0x00. Because corresponding mplsOutSegmentEntry exists. If the entry is used to identify the outgoing node of the LSP, this object must be set to the string 0x00. Because no corresponding mplsOutSegmentEntry exists. Reference to MPLS-LSR-STD-MIB." ::= { hwStaticLspEntry 3 } -- 1.3.6.1.4.1.2011.5.25.121.1.5.1.4 hwStaticLspOwner OBJECT-TYPE SYNTAX INTEGER { static(1), crstatic(2), other(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Denotes the entity that creates and manages the static LSP. See MPLS-LSR-STD-MIB. Options: 1. static(1) -indicates the static LSP. 2. crstatic(2) -indicates the static CR-LSP. 3. other(3) -indicates the LSP of another type. " ::= { hwStaticLspEntry 4 } -- 1.3.6.1.4.1.2011.5.25.121.1.5.1.5 hwStaticLspName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the name of the static LSP or CR-LSP. The name is appointed when the static LSP or CR-LSP is created." REFERENCE "RFC 2863 - The Interfaces Group MIB, McCloghrie, K., and F. Kastenholtz, June 2000" ::= { hwStaticLspEntry 5 } -- 1.3.6.1.4.1.2011.5.25.121.1.5.1.6 hwStaticLspStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the actual operation status of the static LSP/CR-LSP. Options: 1. up(1) -indicates that the static LSP/CR-LSP is in Up state. 2. down(2) -indicates that the static LSP/CR-LSP is in down state. 3. testing(3) -indicates that the static LSP/CR-LSP is used in test mode. " ::= { hwStaticLspEntry 6 } hwStaticLspClassType OBJECT-TYPE SYNTAX INTEGER { ct0(1), ct1(2), ct2(3), ct3(4), ct4(5), ct5(6), ct6(7), ct7(8), none(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Class-Type of this static lsp. Options: 1. ct0(1) -indicates that the class type is ct0. 2. ct1(2) -indicates that the class type is ct1. 3. ct2(3) -indicates that the class type is ct2. 4. ct3(4) -indicates that the class type is ct3. 5. ct4(5) -indicates that the class type is ct4. 6. ct5(6) -indicates that the class type is ct5. 7. ct6(7) -indicates that the class type is ct6. 8. ct7(8) -indicates that the class type is ct7. 9. none(9) -indicates that the class type is unconfiged. " ::= { hwStaticLspEntry 7 } hwStaticLspBandwidth OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The bandwidth of this static lsp. Unit: kbit/s" ::= { hwStaticLspEntry 8 } hwMplsTeClassTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMplsTeClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "TE-class mapping is a set of a maximum of eight TE-class items. TE-class is a pair, such as TE-Class[1] = . A (setup/holding) priority associated with an LSP valid only if it appears as a pair with the Class-Type. Class-Types and priorities can be randomly paired up. You can define a maximum of eight pairs. The LSR is considered to support a particular Class-Type only if it appears in the definition of the eight possible TE-Classes. It is suggested that all the LSRs in the domain use the same TE-Class mapping. The index of this table is hwMplsTeClassId." ::= { hwMplsExtendMibTunnel 6 } hwMplsTeClassEntry OBJECT-TYPE SYNTAX HwMplsTeClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "TE-class mapping is a set of a maximum of eight TE-class items. TE-class is a pair, such as TE-Class[1] = . A (setup/holding) priority associated with an LSP valid only if it appears as a pair with the Class-Type. Class-Types and priorities can be randomly paired up. You can define a maximum of eight pairs. The LSR is considered to support a particular Class-Type only if it appears in the definition of the eight possible TE-Classes. It is suggested that all the LSRs in the domain use the same TE-Class mapping. The index of this entry is hwMplsTeClassId." INDEX { hwMplsTeClassId } ::= { hwMplsTeClassTable 1 } HwMplsTeClassEntry ::= SEQUENCE { hwMplsTeClassId Unsigned32, hwMplsTeClassClassType INTEGER, hwMplsTeClassPriority Unsigned32, hwMplsTeClassDescription OCTET STRING } hwMplsTeClassId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This value represents the index of the TE-Class configured on this LSR." ::= { hwMplsTeClassEntry 1 } hwMplsTeClassClassType OBJECT-TYPE SYNTAX INTEGER { ct0(1), ct1(2), ct2(3), ct3(4), ct4(5), ct5(6), ct6(7), ct7(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value represents a Class-Type supported on the LSR. Options: 1. ct0(1) -indicates that the class type of static CR-LSP is ct0. 2. ct1(2) -indicates that the class type of static CR-LSP is ct1. 3. ct2(3) -indicates that the class type of static CR-LSP is ct2. 4. ct3(4) -indicates that the class type of static CR-LSP is ct3. 5. ct4(5) -indicates that the class type of static CR-LSP is ct4. 6. ct5(6) -indicates that the class type of static CR-LSP is ct5. 7. ct6(7) -indicates that the class type of static CR-LSP is ct6. 8. ct7(8) -indicates that the class type of static CR-LSP is ct7. " ::= { hwMplsTeClassEntry 2 } hwMplsTeClassPriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value represents the preemption priority (setup or holding) supported for a particular class-type, on the LSR. Range: 0-7 Default: 7 " ::= { hwMplsTeClassEntry 3 } hwMplsTeClassDescription OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Textual description of the TE-Class defined by this row." ::= { hwMplsTeClassEntry 4 } hwMplsIfBcTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMplsIfBcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes bandwidth constraints associated with MPLS TE enabled interfaces. The index of this table is ifIndex." ::= { hwMplsExtendMibTunnel 7 } hwMplsIfBcEntry OBJECT-TYPE SYNTAX HwMplsIfBcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes bandwidth constraints associated with MPLS TE enabled interfaces. The index of this entry is ifIndex." INDEX { ifIndex } ::= { hwMplsIfBcTable 1 } HwMplsIfBcEntry ::= SEQUENCE { hwMplsIfMaxResvBandwidth Unsigned32, hwMplsIfBc0Bandwidth Unsigned32, hwMplsIfBc1Bandwidth Unsigned32, hwMplsIfBc2Bandwidth Unsigned32, hwMplsIfBc3Bandwidth Unsigned32, hwMplsIfBc4Bandwidth Unsigned32, hwMplsIfBc5Bandwidth Unsigned32, hwMplsIfBc6Bandwidth Unsigned32, hwMplsIfBc7Bandwidth Unsigned32 } hwMplsIfMaxResvBandwidth OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum reservable bandwidth on this interface. Unit: kbit/s " ::= { hwMplsIfBcEntry 1 } hwMplsIfBc0Bandwidth OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The bandwidth of Class-Type 0 (CT0) in this tunnel. Unit: kbit/s " ::= { hwMplsIfBcEntry 2 } hwMplsIfBc1Bandwidth OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The bandwidth of Class-Type 1 (CT1) in this tunnel. Unit: kbit/s " ::= { hwMplsIfBcEntry 3 } hwMplsIfBc2Bandwidth OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The bandwidth of Class-Type 2 (CT2) in this tunnel. Unit: kbit/s " ::= { hwMplsIfBcEntry 4 } hwMplsIfBc3Bandwidth OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The bandwidth of Class-Type 3 (CT3) in this tunnel. Unit: kbit/s " ::= { hwMplsIfBcEntry 5 } hwMplsIfBc4Bandwidth OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The bandwidth of Class-Type 4 (CT4) in this tunnel. Unit: kbit/s " ::= { hwMplsIfBcEntry 6 } hwMplsIfBc5Bandwidth OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The bandwidth of Class-Type 5 (CT5) in this tunnel. Unit: kbit/s " ::= { hwMplsIfBcEntry 7 } hwMplsIfBc6Bandwidth OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The bandwidth of Class-Type 6 (CT6) in this tunnel. Unit: kbit/s " ::= { hwMplsIfBcEntry 8 } hwMplsIfBc7Bandwidth OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The bandwidth of Class-Type 7 (CT7) in this tunnel. Unit: kbit/s " ::= { hwMplsIfBcEntry 9 } hwStaticLspTnlTable OBJECT-TYPE SYNTAX SEQUENCE OF HwStaticLspTnlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "hwStaticLspTnlTable is used to display static LSP token of a static LSP of a specified name. The index of this table is hwStaticLspTnlName." ::= { hwMplsExtendMibTunnel 8 } hwStaticLspTnlEntry OBJECT-TYPE SYNTAX HwStaticLspTnlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "hwStaticLspTnlTable is used to display static LSP token of a static LSP of a specified name. The index of this entry is hwStaticLspTnlName." INDEX { hwStaticLspTnlName } ::= { hwStaticLspTnlTable 1 } HwStaticLspTnlEntry ::= SEQUENCE { hwStaticLspTnlName SnmpAdminString, hwStaticLspTnlToken Unsigned32 } hwStaticLspTnlName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the name of the Static Lsp." ::= { hwStaticLspTnlEntry 1 } hwStaticLspTnlToken OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the token of the Static Lsp." ::= { hwStaticLspTnlEntry 2 } hwMplsTeVpnQosTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMplsTeVpnQosEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to display VPN QoS information of a specified TE Tunnel according to TunnelID. The index of this table is hwMplsTnlID." ::= { hwMplsExtendMibTunnel 9 } hwMplsTeVpnQosEntry OBJECT-TYPE SYNTAX HwMplsTeVpnQosEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to display VPN QoS information of a specified TE Tunnel according to TunnelID. The index of this entry is hwMplsTnlID." INDEX { hwMplsTnlID } ::= { hwMplsTeVpnQosTable 1 } HwMplsTeVpnQosEntry ::= SEQUENCE { hwMplsTnlID Unsigned32, hwMplsTeVpnMaxBandwidth Unsigned32, hwMplsTeVpnAllocatedBandwidth Unsigned32 } hwMplsTnlID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of this object identifies the TE tunnel ID." ::= { hwMplsTeVpnQosEntry 1 } hwMplsTeVpnMaxBandwidth OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object identifies the bandwidth the TE tunnel can provide for VPN QoS. Unit: kbit/s" ::= { hwMplsTeVpnQosEntry 2 } hwMplsTeVpnAllocatedBandwidth OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object identifies the bandwidth used by VPN QoS, in Kbps. Unit: kbit/s" ::= { hwMplsTeVpnQosEntry 3 } hwStaticLspInIfIndex OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the inbound interface index of a static LSP/CR-LSP." ::= { hwMplsExtendMibTunnel 11 } -- 1.3.6.1.4.1.2011.5.25.121.1.12 hwStaticLspInIfName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the name of an inbound interface of a static LSP/CR-LSP." ::= { hwMplsExtendMibTunnel 12 } -- 1.3.6.1.4.1.2011.5.25.121.1.13 hwStaticLspDownReason OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the reason for static LSP/CR-LSP Down: 0. Other 1. Static LSP/CR-LSP up 2. MPLS disabled on an interface 3. MPLS TE disabled on an interface 4. Route change 5. Tunnel binding associated with the static LSP/CR-LSP deleted 6. Static LSP/CR-LSP configuration delete 7. Inbound interface Down 8. Outbound interface Down." ::= { hwMplsExtendMibTunnel 13 } -- 1.3.6.1.4.1.2011.5.25.121.2 hwMplsExtendTrap OBJECT IDENTIFIER ::= { hwMplsExtendMib 2 } -- 1.3.6.1.4.1.2011.5.25.121.2.1 hwLspTrap OBJECT IDENTIFIER ::= { hwMplsExtendTrap 1 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.1 hwMplsStaticLspUp NOTIFICATION-TYPE OBJECTS { hwStaticLspName, hwStaticLspStatus, ifName, hwStaticLspInIfIndex, hwStaticLspInIfName, hwStaticLspDownReason } STATUS current DESCRIPTION "This notification indicates that the status of referred static LSP changes to Up." ::= { hwLspTrap 1 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.2 hwMplsStaticLspDown NOTIFICATION-TYPE OBJECTS { hwStaticLspName, hwStaticLspStatus, ifName, hwStaticLspInIfIndex, hwStaticLspInIfName, hwStaticLspDownReason } STATUS current DESCRIPTION "This notification indicates that the status of referred static LSP changes to Down." ::= { hwLspTrap 2 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.3 hwMplsStaticCRLspUp NOTIFICATION-TYPE OBJECTS { hwStaticLspName, hwStaticLspStatus, ifName, hwStaticLspInIfIndex, hwStaticLspInIfName, hwStaticLspDownReason } STATUS current DESCRIPTION "This notification indicates that the status of referred static CR-LSP changes to Up." ::= { hwLspTrap 3 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.4 hwMplsStaticCRLspDown NOTIFICATION-TYPE OBJECTS { hwStaticLspName, hwStaticLspStatus, ifName, hwStaticLspInIfIndex, hwStaticLspInIfName, hwStaticLspDownReason } STATUS current DESCRIPTION "This notification indicates that the status of referred static CR-LSP changes to Down." ::= { hwLspTrap 4 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.5 hwMplsTeFrrProtAval NOTIFICATION-TYPE OBJECTS { hwTunnelFrrRouteDBBypassIfIndex, hwTunnelFrrRouteDBInnerLabel } STATUS current DESCRIPTION "This notification indicates that the primary tunnel is bound to bypass tunnel." ::= { hwLspTrap 5 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.6 hwMplsTeFrrProtNotAval NOTIFICATION-TYPE OBJECTS { hwTunnelFrrRouteDBBypassIfIndex } STATUS current DESCRIPTION "This notification indicates that the primary tunnel is unbound to bypass tunnel." ::= { hwLspTrap 6 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.7 hwMplsTeFrrSwitch NOTIFICATION-TYPE OBJECTS { hwMplsTunnelAdminStatus, hwMplsTunnelOperStatus } STATUS current DESCRIPTION "This notification indicates that the primary tunnel is switches to the bypass tunnel." ::= { hwLspTrap 7 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.8 hwMplsTeFrrResume NOTIFICATION-TYPE OBJECTS { hwMplsTunnelAdminStatus, hwMplsTunnelOperStatus } STATUS current DESCRIPTION "This notification indicates that the primary tunnel is switched back from the bypass tunnel." ::= { hwLspTrap 8 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.9 hwMplsTunnelHSBSwitch NOTIFICATION-TYPE OBJECTS { hwMplsTunnelAdminStatus, hwMplsTunnelOperStatus } STATUS current DESCRIPTION "This notification indicates that the data is switched from the primary CR-LSP to the HSB CR-LSP." ::= { hwLspTrap 9 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.10 hwMplsTunnelHSBResume NOTIFICATION-TYPE OBJECTS { hwMplsTunnelAdminStatus, hwMplsTunnelOperStatus } STATUS current DESCRIPTION "This notification indicates that the data is switched from the HSB CR-LSP to the primary CR-LSP." ::= { hwLspTrap 10 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.11 hwMplsTunnelOBSwitch NOTIFICATION-TYPE OBJECTS { hwMplsTunnelAdminStatus, hwMplsTunnelOperStatus } STATUS current DESCRIPTION "This notification indicates that the primary CR-LSP is down and the Ordinary backup CR-LSP is up." ::= { hwLspTrap 11 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.12 hwMplsTunnelOBResume NOTIFICATION-TYPE OBJECTS { hwMplsTunnelAdminStatus, hwMplsTunnelOperStatus } STATUS current DESCRIPTION "This notification indicates that the data is switched from the Ordinary backup CR-LSP to the primary CR-LSP." ::= { hwLspTrap 12 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.13 hwMplsTunnelUp NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelAdminStatus, hwMplsTunnelOperStatus } STATUS obsolete DESCRIPTION "The hwMplsTunnelUp trap indicates that the staus of the tunnel changes into Up." ::= { hwLspTrap 13 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.14 hwMplsTunnelDown NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelAdminStatus, hwMplsTunnelOperStatus } STATUS obsolete DESCRIPTION "The hwMplsTunnelDown trap indicates that the staus of the tunnel changes into Down." ::= { hwLspTrap 14 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.15 hwMplsTunnelChangeBw NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelIfIndex, hwMplsTunnelPreBandwidth, hwMplsTunnelNextBandwidth } STATUS current DESCRIPTION "This notification indicates that the bandwidth of the tunnel is changed." ::= { hwLspTrap 15 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.16 hwMplsTunnelTpOamLossSD NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto } STATUS current DESCRIPTION "This object indicates that the loss ratio of the packets carried by the tunnel exceeded the first threshold." ::= { hwLspTrap 16 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.17 hwMplsOamSDRecovery NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto } STATUS current DESCRIPTION " This object indicates that the loss ratio of the packets carried by the tunnel dropped below the first threshold. " ::= { hwLspTrap 17 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.18 hwMplsOamLoss NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto, ifName} STATUS current DESCRIPTION " This object indicates that TP OAM detected tunnel connectivity faults. " ::= { hwLspTrap 18 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.19 hwMplsOamLossRecovery NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto } STATUS current DESCRIPTION " This object indicates that TP OAM did not detect tunnel connectivity faults. " ::= { hwLspTrap 19 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.20 hwMplsOamAis NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto } STATUS current DESCRIPTION " This object indicates that TP OAM detected an alarm indication signal. " ::= { hwLspTrap 20 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.21 hwMplsOamAisRecovery NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto } STATUS current DESCRIPTION " This object indicates that TP OAM no longer detected alarm indication signals. " ::= { hwLspTrap 21 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.22 hwMplsOamRdi NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto, ifName} STATUS current DESCRIPTION " This object indicates that TP OAM detected remote defects. " ::= { hwLspTrap 22 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.23 hwMplsOamRdiRecovery NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto } STATUS current DESCRIPTION " This object indicates that the remote defects detected by TP OAM were removed. " ::= { hwLspTrap 23 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.24 hwMplsOamMeg NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto } STATUS current DESCRIPTION " This object indicates that the names configured on the two ends of the tunnel are inconsistent. " ::= { hwLspTrap 24 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.25 hwMplsOamMegRecovery NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto } STATUS current DESCRIPTION " This object indicates that the names configured on the two ends of the tunnel now are consistent. " ::= { hwLspTrap 25 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.26 hwMplsOamMep NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto } STATUS current DESCRIPTION " This object indicates that the MEP-IDs configured on the two ends of the tunnel are inconsistent. " ::= { hwLspTrap 26 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.27 hwMplsOamMepRecovery NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto } STATUS current DESCRIPTION " This object indicates that the MEP-IDs configured on the two ends of the tunnel now are consistent. " ::= { hwLspTrap 27 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.28 hwMplsOamSF NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto } STATUS current DESCRIPTION " This object indicates that the loss ratio of the packets carried by the tunnel exceeded the second threshold in the local link. " ::= { hwLspTrap 28 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.29 hwMplsOamSFRecovery NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto } STATUS current DESCRIPTION " This object indicates that the loss ratio of the packets carried by the tunnel dropped below the second threshold in the local link. " ::= { hwLspTrap 29 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.30 hwMplsOamPeriod NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto } STATUS current DESCRIPTION " This object indicates that the TP OAM detection periods on the two ends of the tunnel are inconsistent. " ::= { hwLspTrap 30 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.31 hwMplsOamPeriodRecovery NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto } STATUS current DESCRIPTION " This object indicates that the TP OAM detection periods on the two ends of the tunnel now are consistent. " ::= { hwLspTrap 31 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.32 hwMplsOamLck NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto } STATUS current DESCRIPTION " This object indicates that TP OAM detected the service level of the tunnel has been locked. " ::= { hwLspTrap 32 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.33 hwMplsOamLckRecovery NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto } STATUS current DESCRIPTION " This object indicates that TP OAM detected the service level of the tunnel has not been locked. " ::= { hwLspTrap 33 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.34 hwMplsOamExcess NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto } STATUS current DESCRIPTION " This object indicates that MPLS OAM detected the tunnel received excess alarm. " ::= { hwLspTrap 34 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.35 hwMplsOamExcessRecovery NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto } STATUS current DESCRIPTION " This object indicates that MPLS OAM detected the tunnel received excess alarm end. " ::= { hwLspTrap 35 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.36 hwMplsOamMisMatch NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto } STATUS current DESCRIPTION " This object indicates that MPLS OAM detected the tunnel received MisMatch alarm. " ::= { hwLspTrap 36 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.37 hwMplsOamMisMatchRecovery NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto } STATUS current DESCRIPTION " This object indicates that MPLS OAM detected the tunnel received MisMatch alarm end. " ::= { hwLspTrap 37 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.38 hwMplsOamMisMerge NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto } STATUS current DESCRIPTION " This object indicates that MPLS OAM detected the tunnel received MisMerge alarm. " ::= { hwLspTrap 38 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.39 hwMplsOamMisMergeRecovery NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto } STATUS current DESCRIPTION " This object indicates that MPLS OAM detected the tunnel received MisMerge alarm end. " ::= { hwLspTrap 39 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.40 hwMplsOamUnknown NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto } STATUS current DESCRIPTION " This object indicates that MPLS OAM detected the tunnel received Unknown alarm. " ::= { hwLspTrap 40 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.41 hwMplsOamUnknownRecovery NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto } STATUS current DESCRIPTION " This object indicates that MPLS OAM detected the tunnel received Unknown alarm end. " ::= { hwLspTrap 41 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.42 hwMplsOamBDI NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto, ifName} STATUS current DESCRIPTION " This object indicates that MPLS OAM detected the tunnel received BDI alarm. " ::= { hwLspTrap 42 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.43 hwMplsOamBDIRecovery NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto } STATUS current DESCRIPTION " This object indicates that MPLS OAM detected the tunnel received BDI alarm end. " ::= { hwLspTrap 43 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.44 hwMplsOamFail NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto, ifName} STATUS current DESCRIPTION " This object indicates that MPLS OAM detected the tunnel received OAMFAIL alarm. " ::= { hwLspTrap 44 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.45 hwMplsOamFailRecovery NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto } STATUS current DESCRIPTION " This object indicates that MPLS OAM detected the tunnel received OAMFAIL alarm end. " ::= { hwLspTrap 45 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.46 hwMplsTunnelPrimaryUp NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName } STATUS current DESCRIPTION "This notification indicates that the status of the RSVP-TE Primary LSP changes to Up." ::= { hwLspTrap 46 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.47 hwMplsTunnelPrimaryDown NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName } STATUS current DESCRIPTION "This notification indicates that the status of the RSVP-TE Primary LSP changes to Down." ::= { hwLspTrap 47 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.48 hwMplsTunnelHotstandbyUp NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName } STATUS current DESCRIPTION "This notification indicates that the status of the RSVP-TE Hot-standby LSP changes to Up." ::= { hwLspTrap 48 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.49 hwMplsTunnelHotstandbyDown NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName } STATUS current DESCRIPTION "This notification indicates that the status of the RSVP-TE Hot-standby LSP changes to Down." ::= { hwLspTrap 49 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.50 hwMplsTunnelOrdinaryUp NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName } STATUS current DESCRIPTION "This notification indicates that the status of the RSVP-TE Ordinary LSP changes to Up." ::= { hwLspTrap 50 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.51 hwMplsTunnelOrdinaryDown NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName } STATUS current DESCRIPTION "This notification indicates that the status of the RSVP-TE Ordinary LSP changes to Down." ::= { hwLspTrap 51 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.52 hwMplsTunnelBesteffortUp NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName } STATUS current DESCRIPTION "This notification indicates that the status of the RSVP-TE Best-effort LSP changes to Up." ::= { hwLspTrap 52 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.53 hwMplsTunnelBesteffortDown NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName } STATUS current DESCRIPTION "This notification indicates that the status of the RSVP-TE Best-effort LSP changes to Down." ::= { hwLspTrap 53 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.54 hwMplsTeAutoTunnelDownClear NOTIFICATION-TYPE OBJECTS { mplsTunnelAdminStatus, mplsTunnelOperStatus, hwMplsTunnelIfName } STATUS current DESCRIPTION "This notification indicates that the TE Auto tunnel Down alarm was cleared." ::= { hwLspTrap 54 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.55 hwMplsTeAutoTunnelPrimaryDownClear NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName } STATUS current DESCRIPTION "This notification indicates that the Down alarm about the primary LSP in the TE Auto tunnel was cleared." ::= { hwLspTrap 55 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.56 hwMplsTunnelBBSwitch NOTIFICATION-TYPE OBJECTS { hwMplsTunnelAdminStatus, hwMplsTunnelOperStatus } STATUS current DESCRIPTION "This notification indicates that the primary CR-LSP is Down and the Best-effort backup CR-LSP is Up." ::= { hwLspTrap 56 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.57 hwMplsTunnelBBResume NOTIFICATION-TYPE OBJECTS { hwMplsTunnelAdminStatus, hwMplsTunnelOperStatus } STATUS current DESCRIPTION "This notification indicates that data is switched from the Best-effort backup CR-LSP to the primary CR-LSP." ::= { hwLspTrap 57 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.58 hwMplsExtTunnelDown NOTIFICATION-TYPE OBJECTS {hwMplsTunnelInterfaceName, hwMplsTunnelType, hwMplsTunnelAdminStatus, hwMplsTunnelOperStatus, hwMplsTunnelDownReason, ifName} STATUS current DESCRIPTION "This notification indicates that the status of te tunnel changes to Down." ::= { hwLspTrap 58 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.59 hwMplsExtTunnelDownClear NOTIFICATION-TYPE OBJECTS {hwMplsTunnelInterfaceName, hwMplsTunnelType, hwMplsTunnelAdminStatus, hwMplsTunnelOperStatus, hwMplsTunnelDownReason, ifName} STATUS current DESCRIPTION "This notification indicates that the down alarm of te tunnel was cleared." ::= { hwLspTrap 59 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.60 hwMplsOamLocalLock NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto } STATUS current DESCRIPTION " This object indicates that TP OAM detected the tunnel has been locked. " ::= { hwLspTrap 60 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.61 hwMplsOamLocalLockRecovery NOTIFICATION-TYPE OBJECTS { hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto } STATUS current DESCRIPTION " This object indicates that TP OAM detected the tunnel has not been locked. " ::= { hwLspTrap 61 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.62 hwMplsTunnelDelete NOTIFICATION-TYPE OBJECTS {mplsTunnelAdminStatus,mplsTunnelOperStatus,hwMplsTunnelIfName} STATUS current DESCRIPTION "This notification indicates that the mpls te tunnel was deleted." ::= { hwLspTrap 62 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.63 hwMplsLspThresholdExceed NOTIFICATION-TYPE OBJECTS { hwMplsLspProtocol, hwMplsLspCurrentCount, hwMplsLspThreshold, hwMplsLspTotalCount } STATUS current DESCRIPTION " This object indicates that lsp count has exceeded the threshold. " ::= { hwLspTrap 63 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.64 hwMplsLspThresholdExceedClear NOTIFICATION-TYPE OBJECTS { hwMplsLspProtocol } STATUS current DESCRIPTION " This object indicates that lsp count has resumed from exceeding the threshold. " ::= { hwLspTrap 64 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.65 hwMplsLspTotalCountExceed NOTIFICATION-TYPE OBJECTS { hwMplsLspProtocol, hwMplsLspTotalCount } STATUS current DESCRIPTION " This object indicates that lsp count has reached the total count. " ::= { hwLspTrap 65 } -- 1.3.6.1.4.1.2011.5.25.121.2.1.66 hwMplsLspTotalCountExceedClear NOTIFICATION-TYPE OBJECTS { hwMplsLspProtocol } STATUS current DESCRIPTION " This object indicates that lsp count has resumed from reaching the total count. " ::= { hwLspTrap 66 } -- 1.3.6.1.4.1.2011.5.25.121.2.2 hwMplsTrapObjects OBJECT IDENTIFIER ::= { hwMplsExtendTrap 2 } hwMplsTunnelIfName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The Tunnel Interface name." ::= { hwMplsTrapObjects 1 } hwMplsTunnelFrrConfigOper OBJECT-TYPE SYNTAX INTEGER { unconfig(0), config(1), unknow(2) } MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The value of this object identifies the operation that an FRR configuration is committed on the tunnel. Options: 1.unconfig(0) -indicates the configuration of the undo mpls te fast-reroute command is committed. 2.config(1) -indicates the configuration of the mpls te fast-reroute command is committed. 3.unknow(2) -indicates an unknown operation." ::= { hwMplsTrapObjects 2 } hwMplsTunnelDownReason OBJECT-TYPE SYNTAX INTEGER { other(1), staticLspDown(2), staticCrlspDown(3), outIfDown(4), resourcePreempted(5), rsvpMessageTimeout(6), rsvpNeighborLost(7), bypassTunnelDownOrUnbinded(8), cspfComputeFail(9), userShutdown(10), tpoamLossOfContinuity(11), tpoamAlarmIndicationSignal(12), tpoamRemoteDefectIndication(13), tpoamUnexpectedMEG(14), tpoamUnexpectedMEP(15), tpoamLossSF(16), tpoamPeriod(17), mplsOamLocv(18), mplsOamExcess(19), mplsOamMisMatch(20), mplsOamMisMerge(21), mplsOamUnknown(22), mplsOamBdi(23), mplsOamFdi(24), mplsOamSF(25), mplsOamSD(26), mplsOamDOamFail(27), serviceResume(28), serviceDelete(29), clear(100) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the alarm reason as below: 1. Other; 2. Static LSP down; 3. Static CR-LSP down; 4. The out interface of the RSVP LSP ingress is down; 5. The resource of RSVP LSP is preempted; 6. RSVP message timeout; 7. RSVP neighbor lost; 8. The bypass-tunnel is down or is unbinded with main tunnel, as bypass-tunnel is in used; 9. CSPF compute fail; 10.User shutdown the tunnel; 11.TPOAM indicates the connectivity fault of the link; 12.TPOAM indicates receive alarm indication signal defect of the link; 13.TPOAM indicates the remote defect of the link; 14.TPOAM indicates receive unexpected MEG-ID defect of the link; 15.TPOAM indicates receive unexpected MEP-ID defect of the link; 16.TPOAM indicates packet lost exceed signal fault threshold in the local link; 17.TPOAM indicates packet unexpected period defect of the link; 18.MPLS OAM connectivity fault; 19.MPLS OAM TTSI excess; 20.MPLS OAM TTSI mismatch; 21.MPLS OAM TTSI merge error; 22.MPLS OAM unknown error; 23.MPLS OAM BDI; 24.MPLS OAM FDI; 25.MPLS OAM signal fail; 26.MPLS OAM signal degrade; 27.MPLS OAM fail; 28.Service resume; 29.Service delete; 100. Clear." ::= { hwMplsTrapObjects 3 } hwMplsLspProtocol OBJECT-TYPE SYNTAX INTEGER { ldp(1), unknown(100) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of this object identifies the protocol of the lsp which exceeds the threshold or total count. Options: 1.ldp(1) -indicates the lsp is ldp lsp. 2.unknown(100) -indicates the lsp type is unknown. " ::= { hwMplsTrapObjects 4 } hwMplsLspThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of this object identifies the threshold of the lsp." ::= { hwMplsTrapObjects 5 } hwMplsLspTotalCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of this object identifies the total permit count of lsp." ::= { hwMplsTrapObjects 6 } hwMplsLspCurrentCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of this object identifies the current count of the lsp." ::= { hwMplsTrapObjects 7 } hwMplsTunnelFrrConfigChange NOTIFICATION-TYPE OBJECTS { hwMplsTunnelIfName, hwMplsTunnelFrrConfigOper } STATUS obsolete DESCRIPTION "When the trap indicating that TE-Frr configuration of Tunnel is changed is sent, the cause for the change of TE-FRR configuration of Tunnel is displayed." ::= { hwMplsExtendTrap 3 } hwMplsGlobalObject OBJECT IDENTIFIER ::= { hwMplsExtendMib 3 } hwMplsGlobalWorkMode OBJECT-TYPE SYNTAX INTEGER { standard(1), nonstandard(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The work mode of DS-TE system, default mode is nonstandard. Options: 1. standard(1) -indicates work mode of DS-TE system is standard 2. nonstandard(2) -indicates work mode of DS-TE system is nonstandard" ::= { hwMplsGlobalObject 1 } hwMplsGlobalBcModel OBJECT-TYPE SYNTAX INTEGER { rdm(1), mam(2), extendMam(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Bandwidth Constraint Model currently used by this LSR. Options: 1. rdm(1) -indicates that the bandwidth constraint model is RDM. 2. mam(2) -indicates that the bandwidth constraint model is MAM. 3. extendMam(3) -indicates that the bandwidth constraint model is ExtendMam." ::= { hwMplsGlobalObject 2 } hwMplsLspStatistics OBJECT IDENTIFIER ::= { hwMplsExtendMib 4 } hwMplsLspStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMplsLspStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "hwMplsLspStatisticsTable is used to display the number of ingress LSPs, transit LSPs, or egress LSPs of specified types. The index of this table is hwMplsLspStatisticsLspType." ::= { hwMplsLspStatistics 1 } hwMplsLspStatisticsEntry OBJECT-TYPE SYNTAX HwMplsLspStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "hwMplsLspStatisticsTable is used to display the number of ingress LSPs, transit LSPs, or egress LSPs of specified types. The index of this entry is hwMplsLspStatisticsLspType." INDEX { hwMplsLspStatisticsLspType } ::= { hwMplsLspStatisticsTable 1 } HwMplsLspStatisticsEntry ::= SEQUENCE { hwMplsLspStatisticsLspType INTEGER, hwMplsLspStatisticsIngressLspCount Unsigned32, hwMplsLspStatisticsTransitLspCount Unsigned32, hwMplsLspStatisticsEgressLspCount Unsigned32, hwMplsLspStatisticsTotalLspCount Unsigned32 } hwMplsLspStatisticsLspType OBJECT-TYPE SYNTAX INTEGER { staticLsp(1), staticCrLsp(2), ldpLsp(3), rsvpCrLsp(4), bgpLsp(5), asbrLsp(6), bgpIpv6Lsp(7), l3vpnIpv6Lsp(8) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the LSP type. Options: 1. staticLsp(1) -indicates the static LSP. 2. staticCrLsp(2) -indicates the static CR-LSP. 3. ldpLsp(3) -indicates the LDP LSP. 4. rsvpCrLsp(4) -indicates the RSVP LSP. 5. bgpLsp(5) -indicates the BGP LSP. 6. asbrLsp(6) -indicates the ASBR LSP. 7. bgpIpv6Lsp(7) -indicates the BGP IPv6 LSP. 8. l3vpnIpv6Lsp(8)-indicates the L3VPN IPv6 LSP. " ::= { hwMplsLspStatisticsEntry 1 } hwMplsLspStatisticsIngressLspCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of ingress LSPs of a specified type." ::= { hwMplsLspStatisticsEntry 2 } hwMplsLspStatisticsTransitLspCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of transit LSPs of a specified type." ::= { hwMplsLspStatisticsEntry 3 } hwMplsLspStatisticsEgressLspCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of egress LSPs of a specified type." ::= { hwMplsLspStatisticsEntry 4 } hwMplsLspStatisticsTotalLspCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of the ingress LSPs, transit LSPs and egress LSP of specified types." ::= { hwMplsLspStatisticsEntry 5 } hwMplsExtendConformance OBJECT IDENTIFIER ::= { hwMplsExtendMib 6 } hwMplsExtendGroups OBJECT IDENTIFIER ::= { hwMplsExtendConformance 1 } hwMplsTunnelGroup OBJECT-GROUP OBJECTS { hwTunnelFrrRouteDBInnerLabel, hwTunnelFrrRouteDBBypassIfIndex, hwTunnelFrrARHopProtActual, hwTunnelFrrARHopProtDesired, hwTunnelFrrBypassProtIfIndex, hwStaticLspOwner, hwMplsTunnelClassType, hwMplsTunnelSessionAttr, hwMplsTunnelFrrARHopTableIndex, hwMplsTunnelName, hwMplsTunnelIfIndex, hwMplsTunnelPreBandwidth, hwMplsTunnelNextBandwidth, hwMplsTunnelFrrSwitchover, hwMplsTunnelFrrBandwidth, hwMplsTunnelOperStatus, hwMplsTunnelAdminStatus, hwMplsTunnelBandwidth, hwMplsTeVpnMaxBandwidth, hwMplsTeVpnAllocatedBandwidth, hwMplsTunnelFrrHoldingPrio, hwMplsTunnelFrrSetupPrio, hwMplsTunnelFrrBypassTableIndex, hwMplsTunnelLspType,hwMplsTunnelInterfaceName, hwMplsTunnelSignalProto, hwMplsTunnelType } STATUS current DESCRIPTION "Indicate the atrributes of the tunnel." ::= { hwMplsExtendGroups 1 } hwStaticLspGroup OBJECT-GROUP OBJECTS { hwStaticLspName, hwStaticLspStatus, hwStaticLspTnlToken } STATUS current DESCRIPTION "Indicate the atrributes of the static lsp." ::= { hwMplsExtendGroups 2 } hwMplsDsTeGroup OBJECT-GROUP OBJECTS { hwMplsTunnelCt0Bandwidth, hwMplsTunnelCt1Bandwidth, hwMplsTunnelCt2Bandwidth, hwMplsTunnelCt3Bandwidth, hwMplsTunnelCt4Bandwidth, hwMplsTunnelCt5Bandwidth, hwMplsTunnelCt6Bandwidth, hwMplsTunnelCt7Bandwidth, hwStaticLspClassType, hwStaticLspBandwidth, hwMplsTeClassClassType, hwMplsTeClassPriority, hwMplsTeClassDescription, hwMplsGlobalBcModel, hwMplsGlobalWorkMode, hwMplsIfBc7Bandwidth, hwMplsIfBc6Bandwidth, hwMplsIfBc5Bandwidth, hwMplsIfBc4Bandwidth, hwMplsIfBc3Bandwidth, hwMplsIfBc2Bandwidth, hwMplsIfBc1Bandwidth, hwMplsIfBc0Bandwidth, hwMplsIfMaxResvBandwidth } STATUS current DESCRIPTION "Indicate the atrributes about DS-TE." ::= { hwMplsExtendGroups 3 } hwMplsLspStatisticsGroup OBJECT-GROUP OBJECTS { hwMplsLspStatisticsIngressLspCount, hwMplsLspStatisticsTransitLspCount, hwMplsLspStatisticsEgressLspCount, hwMplsLspStatisticsTotalLspCount } STATUS current DESCRIPTION "Indicate LSP statistics." ::= { hwMplsExtendGroups 4 } hwMplsObsoleteGroup OBJECT-GROUP OBJECTS { hwMplsTunnelIfName, hwMplsTunnelFrrConfigOper } STATUS obsolete DESCRIPTION "Indicate the OBSOLETE objects of MPLS." ::= { hwMplsExtendGroups 5 } hwMplsTrapGroup OBJECT-GROUP OBJECTS { hwMplsTunnelDownReason } STATUS current DESCRIPTION "For mpls trap object." ::= { hwMplsExtendGroups 6 } hwMplsRingGroup OBJECT-GROUP OBJECTS { hwMplsRingNodeID, hwMplsRingName, hwMplsRingDirection, hwMplsRingSwitchReason } STATUS current DESCRIPTION "For mpls ring trap object." ::= { hwMplsExtendGroups 7 } hwMplsExtendCompliances OBJECT IDENTIFIER ::= { hwMplsExtendConformance 2 } hwExtendTrapGroup NOTIFICATION-GROUP NOTIFICATIONS { hwMplsTeFrrProtAval, hwMplsTeFrrProtNotAval, hwMplsStaticLspUp, hwMplsStaticLspDown, hwMplsStaticCRLspUp, hwMplsStaticCRLspDown, hwMplsTeFrrSwitch, hwMplsTeFrrResume, hwMplsTunnelHSBSwitch, hwMplsTunnelHSBResume, hwMplsTunnelOBSwitch, hwMplsTunnelOBResume, hwMplsTunnelChangeBw, hwMplsTunnelTpOamLossSD, hwMplsOamSDRecovery, hwMplsOamLoss, hwMplsOamLossRecovery, hwMplsOamAis, hwMplsOamAisRecovery, hwMplsOamRdi, hwMplsOamRdiRecovery, hwMplsOamMeg, hwMplsOamMegRecovery, hwMplsOamMep, hwMplsOamMepRecovery, hwMplsOamSF, hwMplsOamSFRecovery, hwMplsOamPeriod, hwMplsOamPeriodRecovery, hwMplsOamLck, hwMplsOamLckRecovery, hwMplsOamExcess, hwMplsOamExcessRecovery, hwMplsOamMisMatch, hwMplsOamMisMatchRecovery, hwMplsOamMisMerge, hwMplsOamMisMergeRecovery, hwMplsOamUnknown, hwMplsOamUnknownRecovery, hwMplsOamBDI, hwMplsOamBDIRecovery, hwMplsOamFail, hwMplsOamFailRecovery, hwMplsTunnelPrimaryUp, hwMplsTunnelPrimaryDown, hwMplsTunnelHotstandbyUp, hwMplsTunnelHotstandbyDown, hwMplsTunnelOrdinaryUp, hwMplsTunnelOrdinaryDown, hwMplsTunnelBesteffortUp, hwMplsTunnelBesteffortDown, hwMplsTeAutoTunnelDownClear, hwMplsTeAutoTunnelPrimaryDownClear, hwMplsTunnelBBSwitch, hwMplsTunnelBBResume, hwMplsExtTunnelDown, hwMplsExtTunnelDownClear, hwMplsOamLocalLock, hwMplsOamLocalLockRecovery, hwMplsRingWestOamLoss, hwMplsRingWestOamLossClear, hwMplsRingEastOamLoss, hwMplsRingEastOamLossClear, hwMplsRingWestOamRDI, hwMplsRingWestOamRDIClear, hwMplsRingEastOamRDI, hwMplsRingEastOamRDIClear, hwMplsRingWestOamUnexpectedMEG, hwMplsRingWestOamUnexpectedMEGClear, hwMplsRingEastOamUnexpectedMEG, hwMplsRingEastOamUnexpectedMEGClear, hwMplsRingWestOamUnexpectedPeriod, hwMplsRingWestOamUnexpectedPeriodClear, hwMplsRingEastOamUnexpectedPeriod, hwMplsRingEastOamUnexpectedPeriodClear, hwMplsRingWestOamExcess, hwMplsRingWestOamExcessClear, hwMplsRingEastOamExcess, hwMplsRingEastOamExcessClear, hwMplsRingWestOamSD, hwMplsRingWestOamSDClear, hwMplsRingEastOamSD, hwMplsRingEastOamSDClear, hwMplsRingWestOamSF, hwMplsRingWestOamSFClear, hwMplsRingEastOamSF, hwMplsRingEastOamSFClear, hwMplsRingWestAPSSwitch, hwMplsRingWestAPSResume, hwMplsRingEastAPSSwitch, hwMplsRingEastAPSResume, hwMplsRingWestAPSSwitchFail, hwMplsRingWestAPSSwitchFailClear, hwMplsRingEastAPSSwitchFail, hwMplsRingEastAPSSwitchFailClear, hwMplsRingSwitch, hwMplsRingResume, hwMplsRingWestAPSLost, hwMplsRingWestAPSLostClear, hwMplsRingEastAPSLost, hwMplsRingEastAPSLostClear, hwMplsRingWestAPSMismatch, hwMplsRingWestAPSMismatchClear, hwMplsRingEastAPSMismatch, hwMplsRingEastAPSMismatchClear,hwMplsRingWestOamUnexpectedMEP, hwMplsRingWestOamUnexpectedMEPClear, hwMplsRingEastOamUnexpectedMEP, hwMplsRingEastOamUnexpectedMEPClear, hwMplsTunnelDelete } STATUS current DESCRIPTION "Indicate the traps." ::= { hwMplsExtendCompliances 1 } hwObsoleteTrapGroup NOTIFICATION-GROUP NOTIFICATIONS { hwMplsTunnelFrrConfigChange, hwMplsTunnelUp, hwMplsTunnelDown } STATUS obsolete DESCRIPTION "Indicate the Obsolete traps." ::= { hwMplsExtendCompliances 2 } -- 1.3.6.1.4.1.2011.5.25.121.7 hwMplsRingMib OBJECT IDENTIFIER ::= { hwMplsExtendMib 7 } -- 1.3.6.1.4.1.2011.5.25.121.7.1 hwMplsRingTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMplsRingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the table information of the MPLS ring." ::= { hwMplsRingMib 1 } -- 1.3.6.1.4.1.2011.5.25.121.7.1.1 hwMplsRingEntry OBJECT-TYPE SYNTAX HwMplsRingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the table information of the MPLS ring." INDEX {hwMplsRingID} ::= { hwMplsRingTable 1 } HwMplsRingEntry ::= SEQUENCE { hwMplsRingID Unsigned32, hwMplsRingNodeID Unsigned32, hwMplsRingName OCTET STRING, hwMplsRingDirection OCTET STRING, hwMplsRingSwitchReason OCTET STRING } -- 1.3.6.1.4.1.2011.5.25.121.7.1.1.1 hwMplsRingID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the ID of the MPLS ring. " ::= { hwMplsRingEntry 1 } -- 1.3.6.1.4.1.2011.5.25.121.7.1.1.2 hwMplsRingNodeID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ID of the current Node on the MPLS ring." ::= { hwMplsRingEntry 2 } hwMplsRingName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the name of MPLS ring." ::= { hwMplsRingEntry 3 } hwMplsRingDirection OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the direction of the MPLS ring." ::= { hwMplsRingEntry 4 } hwMplsRingSwitchReason OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the switch reason of the MPLS ring." ::= { hwMplsRingEntry 5 } -- 1.3.6.1.4.1.2011.5.25.121.7.2 hwMplsRingTrap OBJECT IDENTIFIER ::= { hwMplsRingMib 2 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.1 hwMplsRingSwitch NOTIFICATION-TYPE OBJECTS { hwMplsRingNodeID, hwMplsRingName, hwMplsRingDirection, hwMplsRingSwitchReason} STATUS current DESCRIPTION " The notification indicates that the MPLS ring switched. " ::= { hwMplsRingTrap 1 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.2 hwMplsRingResume NOTIFICATION-TYPE OBJECTS { hwMplsRingNodeID, hwMplsRingName, hwMplsRingDirection } STATUS current DESCRIPTION " The notification indicates that the MPLS ring resumed. " ::= { hwMplsRingTrap 2 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.3 hwMplsRingWestOamLoss NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that no expected CV/FFD packet is received for three consecutive cycles in the west of the MPLS ring. " ::= { hwMplsRingTrap 3 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.4 hwMplsRingWestOamLossClear NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the hwMplsRingWestOamLoss alarm was cleared. " ::= { hwMplsRingTrap 4 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.5 hwMplsRingEastOamLoss NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that no expected CV/FFD packet is received for three consecutive cycles in the east of the MPLS ring. " ::= { hwMplsRingTrap 5 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.6 hwMplsRingEastOamLossClear NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the hwMplsRingEastOamLoss alarm was cleared. " ::= { hwMplsRingTrap 6 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.7 hwMplsRingWestOamRDI NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that RDI packets are received in the west of the MPLS ring, indicating that a fault occurs on the forward ring. " ::= { hwMplsRingTrap 7 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.8 hwMplsRingWestOamRDIClear NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the hwMplsRingWestOamRDI alarm was cleared. " ::= { hwMplsRingTrap 8 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.9 hwMplsRingEastOamRDI NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that RDI packets are received in the east of the MPLS ring, indicating that a fault occurs on the forward ring. " ::= { hwMplsRingTrap 9 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.10 hwMplsRingEastOamRDIClear NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the hwMplsRingEastOamRDI alarm was cleared. " ::= { hwMplsRingTrap 10 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.11 hwMplsRingWestOamUnexpectedMEG NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that a CCM frame carrying a correct MEG level but incorrect MEG ID is received in the west of the MPLS ring. " ::= { hwMplsRingTrap 11 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.12 hwMplsRingWestOamUnexpectedMEGClear NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the hwMplsRingWestOamUnexpectedMEG alarm was cleared. " ::= { hwMplsRingTrap 12 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.13 hwMplsRingEastOamUnexpectedMEG NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that a CCM frame carrying a correct MEG level but incorrect MEG ID is received in the east of the MPLS ring. " ::= { hwMplsRingTrap 13 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.14 hwMplsRingEastOamUnexpectedMEGClear NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the hwMplsRingEastOamUnexpectedMEG alarm was cleared. " ::= { hwMplsRingTrap 14 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.15 hwMplsRingWestOamUnexpectedPeriod NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that a CCM frame carrying a correct MEG level, MEG ID, and MEP ID but incorrect period value is received in the west MEP of the MPLS ring. " ::= { hwMplsRingTrap 15 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.16 hwMplsRingWestOamUnexpectedPeriodClear NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the hwMplsRingWestOamUnexpectedPeriod alarm was cleared. " ::= { hwMplsRingTrap 16 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.17 hwMplsRingEastOamUnexpectedPeriod NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that a CCM frame carrying a correct MEG level, MEG ID, and MEP ID but incorrect period value is received in the east MEP of the MPLS ring. " ::= { hwMplsRingTrap 17 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.18 hwMplsRingEastOamUnexpectedPeriodClear NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the hwMplsRingEastOamUnexpectedPeriod alarm was cleared. " ::= { hwMplsRingTrap 18 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.19 hwMplsRingWestOamExcess NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that five or more CV/FFD packets are correctly received within three consecutive cycles in the west of the MPLS ring. " ::= { hwMplsRingTrap 19 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.20 hwMplsRingWestOamExcessClear NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the hwMplsRingWestOamExcess alarm was cleared. " ::= { hwMplsRingTrap 20 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.21 hwMplsRingEastOamExcess NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that five or more CV/FFD packets are correctly received within three consecutive cycles in the east of the MPLS ring. " ::= { hwMplsRingTrap 21 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.22 hwMplsRingEastOamExcessClear NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the hwMplsRingEastOamExcess alarm was cleared. " ::= { hwMplsRingTrap 22 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.23 hwMplsRingWestOamSD NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the number of packets for connectivity check received in the west of the MPLS ring is smaller than the SD threshold. " ::= { hwMplsRingTrap 23 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.24 hwMplsRingWestOamSDClear NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the hwMplsRingWestOamSD alarm was cleared. " ::= { hwMplsRingTrap 24 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.25 hwMplsRingEastOamSD NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the number of packets for connectivity check received in the east of the MPLS ring is smaller than the SD threshold. " ::= { hwMplsRingTrap 25 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.26 hwMplsRingEastOamSDClear NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the hwMplsRingEastOamSD alarm was cleared. " ::= { hwMplsRingTrap 26 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.27 hwMplsRingWestOamSF NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the number of packets for connectivity check received in the west of the MPLS ring is smaller than the SF threshold. " ::= { hwMplsRingTrap 27 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.28 hwMplsRingWestOamSFClear NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the hwMplsRingWestOamSF alarm was cleared. " ::= { hwMplsRingTrap 28 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.29 hwMplsRingEastOamSF NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the number of packets for connectivity check received in the east of the MPLS ring is smaller than the SF threshold. " ::= { hwMplsRingTrap 29 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.30 hwMplsRingEastOamSFClear NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the hwMplsRingEastOamSF alarm was cleared. " ::= { hwMplsRingTrap 30 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.31 hwMplsRingWestAPSSwitch NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that APS switching occurs in the west of the MPLS ring. " ::= { hwMplsRingTrap 31 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.32 hwMplsRingWestAPSResume NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that APS switches back in the west of the MPLS ring. " ::= { hwMplsRingTrap 32 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.33 hwMplsRingEastAPSSwitch NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that APS switching occurs in the east of the MPLS ring. " ::= { hwMplsRingTrap 33 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.34 hwMplsRingEastAPSResume NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that APS switches back in the east of the MPLS ring. " ::= { hwMplsRingTrap 34 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.35 hwMplsRingWestAPSSwitchFail NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the remote APS switching fails in the west of the MPLS ring. " ::= { hwMplsRingTrap 35 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.36 hwMplsRingWestAPSSwitchFailClear NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the hwMplsRingWestAPSSwitchFail alarm was cleared. " ::= { hwMplsRingTrap 36 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.37 hwMplsRingEastAPSSwitchFail NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the remote APS switching fails in the east of the MPLS ring. " ::= { hwMplsRingTrap 37 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.38 hwMplsRingEastAPSSwitchFailClear NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the hwMplsRingEastAPSSwitchFail alarm was cleared. " ::= { hwMplsRingTrap 38 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.39 hwMplsRingWestAPSLost NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that APS packets are missing in the west of the MPLS ring. " ::= { hwMplsRingTrap 39 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.40 hwMplsRingWestAPSLostClear NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the hwMplsRingWestAPSLost alarm was cleared. " ::= { hwMplsRingTrap 40 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.41 hwMplsRingEastAPSLost NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that APS packets are missing in the east of the MPLS ring. " ::= { hwMplsRingTrap 41 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.42 hwMplsRingEastAPSLostClear NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the hwMplsRingEastAPSLost alarm was cleared. " ::= { hwMplsRingTrap 42 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.43 hwMplsRingWestAPSMismatch NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the source ID carried by APS packets received in the west is different from the peer source ID configured for the west state machine on the MPLS ring. " ::= { hwMplsRingTrap 43 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.44 hwMplsRingWestAPSMismatchClear NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the hwMplsRingWestAPSMismatch alarm was cleared. " ::= { hwMplsRingTrap 44 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.45 hwMplsRingEastAPSMismatch NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the source ID carried by APS packets received in the east is different from the peer source ID configured for the east state machine on the MPLS ring. " ::= { hwMplsRingTrap 45 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.46 hwMplsRingEastAPSMismatchClear NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the hwMplsRingEastAPSMismatch alarm was cleared. " ::= { hwMplsRingTrap 46 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.47 hwMplsRingWestOamUnexpectedMEP NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that a CCM frame carrying a correct MEG level and correct MEG ID but not the expected MEP ID is received in the west of the MPLS ring. " ::= { hwMplsRingTrap 47 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.48 hwMplsRingWestOamUnexpectedMEPClear NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the hwMplsRingWestOamUnexpectedMEP alarm was cleared. " ::= { hwMplsRingTrap 48 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.49 hwMplsRingEastOamUnexpectedMEP NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that a CCM frame carrying a correct MEG level and correct MEG ID but not the expected MEP ID is received in the east of the MPLS ring. " ::= { hwMplsRingTrap 49 } -- 1.3.6.1.4.1.2011.5.25.121.7.2.50 hwMplsRingEastOamUnexpectedMEPClear NOTIFICATION-TYPE OBJECTS { hwMplsRingName } STATUS current DESCRIPTION " The notification indicates that the hwMplsRingEastOamUnexpectedMEP alarm was cleared. " ::= { hwMplsRingTrap 50 } END -- -- HUAWEI-MPLS-EXTEND-MIB.mib --