-- ================================================================= -- Copyright (C) 2002 by HUAWEI TECHNOLOGIES. All rights reserved. -- -- Description: configuration mangement mib -- Reference: huawei enterprise mib -- Version: V1.0 -- History: -- initial version 2002-12-20 -- ================================================================= HUAWEI-CONFIG-MAN-MIB DEFINITIONS ::= BEGIN IMPORTS huaweiUtility FROM HUAWEI-MIB OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF TimeTicks, IpAddress, Integer32, Unsigned32, Counter32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI InetAddress FROM INET-ADDRESS-MIB -- [RFC4001] DisplayString, TruthValue, RowStatus, TEXTUAL-CONVENTION, DateAndTime FROM SNMPv2-TC; -- 1.3.6.1.4.1.2011.6.10 hwConfig MODULE-IDENTITY LAST-UPDATED "200608222230Z" -- August 22, 2006 at 22:30 GMT ORGANIZATION "Huawei Technologies co.,Ltd." CONTACT-INFO "VRP Team Huawei Technologies co.,Ltd. Huawei Bld.,NO.3 Xinxi Rd., Shang-Di Information Industry Base, Hai-Dian District Beijing P.R. China http://www.huawei.com Zip:100085 " DESCRIPTION "The HUAWEI-CONFIG-MAN-MIB contains objects to manage the system configuration. It defines the model used to represent configuration data that exists elsewhere in the system and in peripheral devices. The MIB is proper for system configuration. NMS can query configuration change log information and operate configuration. There are no constraints on this MIB." REVISION "200608222230Z" -- August 22, 2006 at 22:30 GMT DESCRIPTION "The initial revision of this MIB module ." ::= { huaweiUtility 10 } -- -- Textual conventions -- ConfigOperationType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specify operation types on configuration. Currently, following types of operation are provided: running2Startup(1):refresh the saved configuration file used currently with current configuration running in the system. The operation is the same as that of [save] command from command line.(running->startup) startup2Running(2):append the configration of the saved configuration file used currently to current configuration running in the system.(running<-startup) running2Net(3):Send the current configuration running in the system to the network through a certain protocol.(running->networkFile) net2Running(4):append the configration of a remote file from network to current configuration running in the system through a certain protocol.(running<-networkFile) net2Startup(5):Download a remote file to the local system to be the saved configuration file used currently through a certain protocol.(startup<-networkFile) startup2Net(6):Send the saved configuration file used currently to the network through a certain protocol. (startup ->networkFile)" SYNTAX INTEGER { running2Startup(1), startup2Running(2), running2Net(3), net2Running(4), net2Startup(5), startup2Net(6) } -- -- Node definitions -- -- 1.3.6.1.4.1.2011.6.10.1 hwConfigManObjects OBJECT IDENTIFIER ::= { hwConfig 1 } -- 1.3.6.1.4.1.2011.6.10.1.1 hwCfgLog OBJECT IDENTIFIER ::= { hwConfigManObjects 1 } -- 1.3.6.1.4.1.2011.6.10.1.1.1 hwCfgRunModifiedLast OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The object records the value of sysUpTime when the current configuration running in the system was last modified." ::= { hwCfgLog 1 } -- 1.3.6.1.4.1.2011.6.10.1.1.2 hwCfgRunSavedLast OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The object records the value of sysUpTime when the current configuration running in the system was last saved. If the value of the object is smaller than hwCfgRunModifiedLast, the current configuration has been modified but not saved." ::= { hwCfgLog 2 } -- 1.3.6.1.4.1.2011.6.10.1.1.3 hwCfgStartModifiedLast OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The object records the value of sysUpTime when the saved configuration used currently was last modified. It may have been changed by a save of the current configuration running in the system or other methods such as copy." ::= { hwCfgLog 3 } -- 1.3.6.1.4.1.2011.6.10.1.1.4 hwCfgLogLimitedEntries OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The object shows the maximum number of rows in hwCfgLogTable. The value supported by the system is 10. " ::= { hwCfgLog 4 } -- 1.3.6.1.4.1.2011.6.10.1.1.5 hwCfgLogDeletedEntries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of rows deleted from hwCfgLogTable. " ::= { hwCfgLog 5 } -- 1.3.6.1.4.1.2011.6.10.1.1.6 hwCfgLogWantBackup OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Decides whether or not to backup the configuration log information. If the value is true, the data of configuration log on the master will be sent to slave. Otherwise the data of log will be lost when master switches to slave. Default value is true." ::= { hwCfgLog 6 } -- 1.3.6.1.4.1.2011.6.10.1.1.7 hwCfgLogTable OBJECT-TYPE SYNTAX SEQUENCE OF HwCfgLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of configuration log on this device. " ::= { hwCfgLog 7 } -- 1.3.6.1.4.1.2011.6.10.1.1.7.1 hwCfgLogEntry OBJECT-TYPE SYNTAX HwCfgLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a configuration log in this system." INDEX { hwCfgLogIndex } ::= { hwCfgLogTable 1 } HwCfgLogEntry ::= SEQUENCE { hwCfgLogIndex Integer32, hwCfgLogTime TimeTicks, hwCfgLogSrcCmd INTEGER, hwCfgLogSrcData INTEGER, hwCfgLogDesData INTEGER, hwCfgLogTerminalType INTEGER, hwCfgLogTerminalUser DisplayString, hwCfgLogTerminalNum Integer32, hwCfgLogTerminalLocation DisplayString, hwCfgLogCmdSrcAddress IpAddress, hwCfgLogVirHost DisplayString, hwCfgLogUserName DisplayString, hwCfgLogServerAddress IpAddress, hwCfgLogFile DisplayString, hwCfgLogConfigChangeId Unsigned32, hwCfgLogCfgBaselineTime DisplayString } -- 1.3.6.1.4.1.2011.6.10.1.1.7.1.1 hwCfgLogIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION " The index of hwCfgLogTable, which is a incremental integer. The maximum value of the node is 2147483647.The table should wrap the value to 1 and flush all the existing entries when the maximum value is reached." ::= { hwCfgLogEntry 1 } -- 1.3.6.1.4.1.2011.6.10.1.1.7.1.2 hwCfgLogTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the sysUpTime when the configuration log was generated." ::= { hwCfgLogEntry 2 } -- 1.3.6.1.4.1.2011.6.10.1.1.7.1.3 hwCfgLogSrcCmd OBJECT-TYPE SYNTAX INTEGER { cmdLine(1), snmp(2), netconf(3), other(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the source command resulting in the log. Currently we provide the types of source: 1.cmdLine(1):configuration log instigated by command line. 2.snmp(2):configuration log instigated by snmp. 3.other(3):configuration log instigated by other source unknown." ::= { hwCfgLogEntry 3 } -- 1.3.6.1.4.1.2011.6.10.1.1.7.1.4 hwCfgLogSrcData OBJECT-TYPE SYNTAX INTEGER { erase(1), runningData(2), commandSource(3), startupData(4), local(5), netFtp(6), hotPlugging(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The configuration data source for the event. erase erasing destination running operational data alive commandSource the command source itself startup what the system will use next reboot local local NVRAM or flash netFtp FTP network transfer hotPlugging board is inserted or pulled out on line " ::= { hwCfgLogEntry 4 } -- 1.3.6.1.4.1.2011.6.10.1.1.7.1.5 hwCfgLogDesData OBJECT-TYPE SYNTAX INTEGER { unknown(1), runningData(2), commandSource(3), startupData(4), local(5), netkFtp(6), hotPlugging(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The configuration data destination for the event. unknown unknown running operational data alive commandSource the command source itself startup what the system will use next reboot local local NVRAM or flash netFtp FTP network transfer hotPlugging board is inserted or pulled out on line" ::= { hwCfgLogEntry 5 } -- 1.3.6.1.4.1.2011.6.10.1.1.7.1.6 hwCfgLogTerminalType OBJECT-TYPE SYNTAX INTEGER { notApplicable(1), unknown(2), console(3), terminal(4), virtual(5), auxiliary(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the terminal type. If hwCfgLogSrcData is not 'cmdLine', the value of the object is 'notApplicable'. The value list: notApplicable(1): no meaning at this time. unknown(2): unknown terminal type. console(3): terminal(4) virtual(5) auxiliary(6)" ::= { hwCfgLogEntry 6 } -- 1.3.6.1.4.1.2011.6.10.1.1.7.1.7 hwCfgLogTerminalUser OBJECT-TYPE SYNTAX DisplayString (SIZE (0..85)) MAX-ACCESS read-only STATUS current DESCRIPTION " The name of a logging user which is available when hwCfgLogSrcCmd is 'cmdLine'. When hwCfgLogTerminalType is 'virtual' and user login in authentication, the object will be the name of the user. Otherwise, it is a zero length string." ::= { hwCfgLogEntry 7 } -- 1.3.6.1.4.1.2011.6.10.1.1.7.1.8 hwCfgLogTerminalNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the terminal number. If hwCfgLogSrcCmd variable is not 'cmdLine'(such as 'snmp'or 'other'), the value of the object is '-1'. If hwCfgLogSrcCmd variable is 'cmdLine', the value '-1' means that it is not the active terminal user. " ::= { hwCfgLogEntry 8 } -- 1.3.6.1.4.1.2011.6.10.1.1.7.1.9 hwCfgLogTerminalLocation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The available location of the terminal when hwCfgLogSrcCmd is 'cmdLine'. Otherwise, it is a zero length string. " ::= { hwCfgLogEntry 9 } -- 1.3.6.1.4.1.2011.6.10.1.1.7.1.10 hwCfgLogCmdSrcAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION " The address from which a request comes when the value of hwCfgLogSrcCmd is 'snmp(2)'. The ip address of the remote system connected when the value of hwCfgLogTerminalType is 'virtual'. Otherwise, the value of the object is 0.0.0.0. " ::= { hwCfgLogEntry 10 } -- 1.3.6.1.4.1.2011.6.10.1.1.7.1.11 hwCfgLogVirHost OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The available host name of the remote system connected if hwCfgLogTerminalType has the value of 'virtual'. Otherwise, the value of the object is a zero length string. " ::= { hwCfgLogEntry 11 } -- 1.3.6.1.4.1.2011.6.10.1.1.7.1.12 hwCfgLogUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The user name used when hwCfgLogSrcData or hwCfgLogDesData has the value of 'netFtp'. Otherwise, the value of the object is a zero length string. " ::= { hwCfgLogEntry 12 } -- 1.3.6.1.4.1.2011.6.10.1.1.7.1.13 hwCfgLogServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The remote server address when hwCfgLogSrcData or hwCfgLogDesData has the value of 'netFtp'. Otherwise, the value of the object is 0.0.0.0. " ::= { hwCfgLogEntry 13 } -- 1.3.6.1.4.1.2011.6.10.1.1.7.1.14 hwCfgLogFile OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The remote file name when hwCfgLogSrcData or hwCfgLogDesData has the value of 'netFtp'. Otherwise, the value of the object is a zero length string. " ::= { hwCfgLogEntry 14 } -- 1.3.6.1.4.1.2011.6.10.1.1.7.1.15 hwCfgLogConfigChangeId OBJECT-TYPE SYNTAX Unsigned32 (0..4294967294) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "This is the sequence ID of configuration. When configuration is changed, ID is added. " ::= { hwCfgLogEntry 15 } -- 1.3.6.1.4.1.2011.6.10.1.1.7.1.16 hwCfgLogCfgBaselineTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Specifies the time of system confiuration was baseline. " ::= { hwCfgLogEntry 16 } -- 1.3.6.1.4.1.2011.6.10.1.2 hwCfgOperate OBJECT IDENTIFIER ::= { hwConfigManObjects 2 } -- 1.3.6.1.4.1.2011.6.10.1.2.1 hwCfgOperateGlobalEntryLimit OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of copy entries that may be held in hwCfgOperateTable. A particular setting does not guarantee that much data can be held. " ::= { hwCfgOperate 1 } -- 1.3.6.1.4.1.2011.6.10.1.2.2 hwCfgOperateEntryAgeOutTime OBJECT-TYPE SYNTAX Integer32 (1..60) UNITS "minute" MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the primary reference time of the hwCfgOperateEntry saved in the hwCfgOperateTable.This value is not valid if there is extra space in the hwCfgOperateTable, that is, the hwCfgOperateEntry is not deleted periodically. If there is no space in the hwCfgOperateTable to save a new hwCfgOperateEntry, the expired hwCfgOperateEntry that is unactivated or the hwCfgOperateEntry that is processed may be deleted. Default value is 5." ::= { hwCfgOperate 2 } -- 1.3.6.1.4.1.2011.6.10.1.2.3 hwCfgOperateResultGlobalEntryLimit OBJECT-TYPE SYNTAX Integer32(1..50) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of copy entries that may be held in hwCfgOperateResultTable. A particular setting does not guarantee that much data can be held. Default value is 5. " ::= { hwCfgOperate 3 } -- 1.3.6.1.4.1.2011.6.10.1.2.4 hwCfgOperateTable OBJECT-TYPE SYNTAX SEQUENCE OF HwCfgOperateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of config-operation requests. " ::= { hwCfgOperate 4 } -- 1.3.6.1.4.1.2011.6.10.1.2.4.1 hwCfgOperateEntry OBJECT-TYPE SYNTAX HwCfgOperateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An operate request entry." INDEX { hwCfgOperateIndex } ::= { hwCfgOperateTable 1 } HwCfgOperateEntry ::= SEQUENCE { hwCfgOperateIndex Integer32, hwCfgOperateType ConfigOperationType, hwCfgOperateProtocol INTEGER, hwCfgOperateFileName DisplayString, hwCfgOperateServerAddress IpAddress, hwCfgOperateUserName DisplayString, hwCfgOperateUserPassword DisplayString, hwCfgOperateEndNotificationSwitch TruthValue, hwCfgOperateRowStatus RowStatus, hwCfgOperateServerPort Integer32, hwCfgOperateSourceAddress IpAddress, hwCfgOperateSourceInterface OCTET STRING, hwCfgOperateOnError INTEGER } -- 1.3.6.1.4.1.2011.6.10.1.2.4.1.1 hwCfgOperateIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique index value of a row in this table." ::= { hwCfgOperateEntry 1 } -- 1.3.6.1.4.1.2011.6.10.1.2.4.1.2 hwCfgOperateType OBJECT-TYPE SYNTAX ConfigOperationType MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the type of an operation on configuration. For detailed information, please see the ConfigOperationType definition. " ::= { hwCfgOperateEntry 2 } -- 1.3.6.1.4.1.2011.6.10.1.2.4.1.3 hwCfgOperateProtocol OBJECT-TYPE SYNTAX INTEGER { ftp(1), tftp(2), sftp(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of hwCfgOperateType is running2Net,net2Running,net2Startup or startup2net, this object specifies the protocol which is used for file transfer . The default protocol is ftp if no protocol is specified. And for other value of hwCfgOperateType , this object may be ignored by the implementation. When hwCfgOperateProtocol is specified as SFTP, only password authentication-type is valid. " ::= { hwCfgOperateEntry 3 } -- 1.3.6.1.4.1.2011.6.10.1.2.4.1.4 hwCfgOperateFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "When the object of hwCfgOperateType has the value of net2Startup, net2running or running2Net, the value must be specified. The file name may include the path if applicable. If the value of hwCfgOperateType is net2Startup or net2running, this node specifies the source file name of transfers. If the value of hwCfgOperateType is running2Net, this node specifies the destination file name of transfers. If the value of hwCfgOperateType is running2startup, this node specifies the saved file name of current running configuration. When hwCfgOperateType has the value of startup2net, the object may not be created instead of using the file name of startup configuration file. " ::= { hwCfgOperateEntry 4 } -- 1.3.6.1.4.1.2011.6.10.1.2.4.1.5 hwCfgOperateServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "When the operation type is running2Net,net2Running,net2Startup or startup2net , the ip address of the FTP/TFTP/SFTP server from/to which to download/upload must be specified. Values of 0.0.0.0 or FF.FF.FF.FF are not permitted." ::= { hwCfgOperateEntry 5 } -- 1.3.6.1.4.1.2011.6.10.1.2.4.1.6 hwCfgOperateUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "When the operation type is running2Net,net2Running,net2Startup or startup2net , the user name for the FTP/SFTP server from/to which to download/upload should be specified. The object must be created if hwCfgOperateProtocol has the value of 'ftp'. " ::= { hwCfgOperateEntry 6 } -- 1.3.6.1.4.1.2011.6.10.1.2.4.1.7 hwCfgOperateUserPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "When the operation type is running2Net,net2Running,net2Startup or startup2net , the user password for the FTP/SFTP server from/to which to download/upload should be specified. The object must be created if hwCfgOperateProtocol has the value of 'ftp'. When get the value of the field, the device will return a zero-length string." ::= { hwCfgOperateEntry 7 } -- 1.3.6.1.4.1.2011.6.10.1.2.4.1.8 hwCfgOperateEndNotificationSwitch OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies whether or not a notification should be issued on the completion of the operation." DEFVAL { false } ::= { hwCfgOperateEntry 8 } -- 1.3.6.1.4.1.2011.6.10.1.2.4.1.9 hwCfgOperateRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry. When the status is active : (1) In the situation that the specified transfer operation by ftp/tftp is in progress, the transfer operation will be aborted if the status is set to notInService. (2) In any other situations, the specified operation will not be aborted even if the status is set to notInService. " ::= { hwCfgOperateEntry 9 } -- 1.3.6.1.4.1.2011.6.10.1.2.4.1.10 hwCfgOperateServerPort OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the SFTP/FTP server port that is used for file transfer only if the value of hwCfgOperateProtocol is sftp/ftp. The default SFTP server port is 22 if no port is specified. The default FTP server port is 21 if no port is specified. If the value of hwCfgOperateProtocol is not sftp/ftp, this object is ignored by the implementation. " ::= { hwCfgOperateEntry 10 } hwCfgOperateSourceAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The source IP address. When the operation type is running2Net, net2Running, net2Startup or startup2net, the source IP address of the client may be specified or not. Default is 0.0.0.0 . If the source type is set to both of IP address and interface, the former has the priority." DEFVAL { 0 } ::= { hwCfgOperateEntry 11 } hwCfgOperateSourceInterface OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..47)) MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the interface.When the operation type is running2Net, net2Running,net2Startup or startup2net, the source interface of the FTP/TFTP client may be specified or not. If the source type is set to both of IP address and interface,the former has the priority." ::= { hwCfgOperateEntry 12 } -- 1.3.6.1.4.1.2011.6.10.1.2.4.1.13 hwCfgOperateOnError OBJECT-TYPE SYNTAX INTEGER { continueOnError(1), stopOnError(2), rollbackOnError(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the action when a configuration command fails to be executed. continueOnError: skips the failed configuration command and continues to run other configuration commands. stopOnError: stops running the failed configuration command and does not run other configuration commands. rollbackOnError: rolls back the configuration to that before the configuration file is executed." ::= { hwCfgOperateEntry 13 } -- 1.3.6.1.4.1.2011.6.10.1.2.5 hwCfgOperateResultTable OBJECT-TYPE SYNTAX SEQUENCE OF HwCfgOperateResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of config-operation requests result." ::= { hwCfgOperate 5 } -- 1.3.6.1.4.1.2011.6.10.1.2.7.1 hwCfgOperateResultEntry OBJECT-TYPE SYNTAX HwCfgOperateResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The result entries of configuration operation requests." INDEX { hwCfgOperateResultIndex } ::= { hwCfgOperateResultTable 1 } HwCfgOperateResultEntry ::= SEQUENCE { hwCfgOperateResultIndex Integer32, hwCfgOperateResultOptIndex Integer32, hwCfgOperateResultOpType ConfigOperationType, hwCfgOperateState INTEGER, hwCfgOperateTime TimeTicks, hwCfgOperateEndTime TimeTicks, hwCfgOperateTransferProgress Integer32, hwCfgOperateErrorReason DisplayString } -- 1.3.6.1.4.1.2011.6.10.1.2.5.1.1 hwCfgOperateResultIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION " The index of Table, which is an incremental integer. The maximum value of the node is 2147483647.The agent should wrap the value to 1 and flush all the existing entries when the maximum value is reached." ::= { hwCfgOperateResultEntry 1 } -- 1.3.6.1.4.1.2011.6.10.1.2.5.1.2 hwCfgOperateResultOptIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The operation index in the hwCfgOperateTable." ::= { hwCfgOperateResultEntry 2 } -- 1.3.6.1.4.1.2011.6.10.1.2.5.1.3 hwCfgOperateResultOpType OBJECT-TYPE SYNTAX ConfigOperationType MAX-ACCESS read-only STATUS current DESCRIPTION "The operation type in the hwCfgOperateTable." ::= { hwCfgOperateResultEntry 3 } -- 1.3.6.1.4.1.2011.6.10.1.2.5.1.4 hwCfgOperateState OBJECT-TYPE SYNTAX INTEGER { opInProgress(1), opSuccess(2), opInvalidOperation(3), opInvalidProtocol(4), opInvalidSourceName(5), opInvalidDestName(6), opInvalidServerAddress(7), opDeviceBusy(8), opDeviceOpenError(9), opDeviceError(10), opDeviceNotProgrammable(11), opDeviceFull(12), opFileOpenError(13), opFileTransferError(14), opFileChecksumError(15), opNoMemory(16), opAuthFail(17), opTimeOut(18), opUnknownFailure(19), opAbort(20), opInvalidSourceAddress(21), opInvalidSourceInterface(22), opCmdExecuteFail(23) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the specified operation. opInProgress : specified operation is active opOperationSuccess : specified operation is supported and completed successfully opInvalidOperation : command invalid or command/protocol/device combination unsupported opInvalidProtocol : invalid protocol specified opInvalidSourceName : invalid source file name specified. opInvalidDestName : invalid target name specified. opInvalidServerAddress : invalid server address specified opDeviceBusy : specified device is in use and locked by another process opDeviceOpenError : invalid device name opDeviceError : device read, write or erase error opDeviceNotProgrammable : device is read-only but a write or erase operation was specified opDeviceFull : device is filled to capacity opFileOpenError : invalid file name; file not found in partition opFileTransferError : file transfer was unsuccessfull; network failure opFileChecksumError : file checksum in Flash failed opNoMemory : system running low on memory opAuthFail: invalid user name or password opTimeOut : file transfer was timeout opUnknownFailure : failure unknown opAbort : transfer operation has been aborted opInvalidSourceAdress : invalid source address specified. opInvalidSourceInterface : invalid source interface specified. opCmdExecuteFail : execute command return error. " ::= { hwCfgOperateResultEntry 4 } -- 1.3.6.1.4.1.2011.6.10.1.2.5.1.5 hwCfgOperateTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Records the time taken for the operation. This object will be like a stopwatch, starting when the operation starts, and stopping when the operation completes." ::= { hwCfgOperateResultEntry 5 } -- 1.3.6.1.4.1.2011.6.10.1.2.5.1.6 hwCfgOperateEndTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the configuration operation is finished." ::= { hwCfgOperateResultEntry 6 } -- 1.3.6.1.4.1.2011.6.10.1.2.5.1.7 hwCfgOperateTransferProgress OBJECT-TYPE SYNTAX Integer32 (1..100 | 65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates progress of file transfer in the hwCfgOperateTable. When hwCfgOperateProtocol is specified as 2(tftp) or 3(sftp), and hwCfgOperateType is specified as net2Running or net2Startup, this object will be set as 65535, which indicates the progress can not be calculated. " ::= { hwCfgOperateResultEntry 7} -- 1.3.6.1.4.1.2011.6.10.1.2.5.1.8 hwCfgOperateErrorReason OBJECT-TYPE SYNTAX DisplayString (SIZE (1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The failure reason of configuration operation." ::= { hwCfgOperateResultEntry 8 } -- 1.3.6.1.4.1.2011.6.10.1.2.6 hwCfgModuleChangeTimeTable OBJECT-TYPE SYNTAX SEQUENCE OF HwCfgModuleChangeTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table on changes of configuration." ::= { hwCfgOperate 6 } -- 1.3.6.1.4.1.2011.6.10.1.2.6.1 hwCfgModuleChangeTimeEntry OBJECT-TYPE SYNTAX HwCfgModuleChangeTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Time entity on changes of the configuration module." INDEX { hwCfgModuleId } ::= { hwCfgModuleChangeTimeTable 1 } HwCfgModuleChangeTimeEntry ::= SEQUENCE { hwCfgModuleId Integer32 (0..2147483647), hwCfgModuleChangeTime TimeTicks } -- 1.3.6.1.4.1.2011.6.10.1.2.6.1.1 hwCfgModuleId OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Module index. It is an integer without enumeration. This is because the enumeration may expose the classification methods of modules. In addition, this field is uncertain in the beginning stage and once the value is determined, it cannot be modified." ::= { hwCfgModuleChangeTimeEntry 1 } -- 1.3.6.1.4.1.2011.6.10.1.2.6.1.11 hwCfgModuleChangeTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time on changes of the module." ::= { hwCfgModuleChangeTimeEntry 11 } -- 1.3.6.1.4.1.2011.6.10.1.2.7 hwCfgOperateCompareConfig OBJECT-TYPE SYNTAX INTEGER {initial(0),same(1),different(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "compare configuration of the files" ::= { hwCfgOperate 7 } -- ========================================================================== -- configuration save group -- ========================================================================== -- 1.3.6.1.4.1.2011.6.10.1.3 hwCfgSave OBJECT IDENTIFIER ::= { hwConfigManObjects 3 } -- 1.3.6.1.4.1.2011.6.10.1.3.1 hwCfgSaveAutoInterval OBJECT-TYPE SYNTAX Integer32(0|30..43200) --metric: minute MAX-ACCESS read-write STATUS current DESCRIPTION "The object records the interval minute of saving configuration automatically. the function of saving configuration automatically is disable when the interval is zero, else it is enable(the default is 30 minutes). " ::= { hwCfgSave 1 } -- 1.3.6.1.4.1.2011.6.10.1.3.2 hwCfgSaveAutoTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The object records the latest date and time when the current configurations were saved automatically in the system." ::= { hwCfgSave 2 } -- 1.3.6.1.4.1.2011.6.10.1.3.3 hwCfgSaveManualTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The object records the latest date and time when the current configurations were saved manually in the system." ::= { hwCfgSave 3 } -- 1.3.6.1.4.1.2011.6.10.1.3.4 hwCfgSaveAutoCpuLimit OBJECT-TYPE SYNTAX Integer32(1..60) --metric: % MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the upper limit of the CPU usage when configurations are automatically saved.If the function of saving configuration automatically is not enabled, the value is insignificant. Default value is 50." ::= { hwCfgSave 4 } -- 1.3.6.1.4.1.2011.6.10.1.3.5 hwCfgSaveAutoNoCfgInterval OBJECT-TYPE SYNTAX Integer32(30..43200) --metric: minute MAX-ACCESS read-write STATUS obsolete DESCRIPTION "This object indicates the interval from the time configurations are automatically saved to now.If the function of saving configuration automatically is not enabled, the value is insignificant. Default value is 30." ::= { hwCfgSave 5 } -- 1.3.6.1.4.1.2011.6.10.1.3.6 hwCfgSaveAutoDelay OBJECT-TYPE SYNTAX Integer32(1..60) --metric: minute MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the delay minute after some configurations change happens then configurations are automatically saved.If the function of saving configuration automatically is not enabled, the value is insignificant. Default value is 5." ::= { hwCfgSave 6 } -- 1.3.6.1.4.1.2011.6.10.1.3.7 hwCfgBackup2ServerTable OBJECT-TYPE SYNTAX SEQUENCE OF HwCfgBackup2ServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of config-operation requests. " ::= { hwCfgSave 7 } -- 1.3.6.1.4.1.2011.6.10.1.3.7.1 hwCfgBackup2ServerEntry OBJECT-TYPE SYNTAX HwCfgBackup2ServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An operate request entry." INDEX { hwCfgBackupIndex } ::= { hwCfgBackup2ServerTable 1 } HwCfgBackup2ServerEntry ::= SEQUENCE { hwCfgBackupIndex Integer32, hwCfgBackupServerIp IpAddress, hwCfgBackupProtocol INTEGER, hwCfgBackupUser DisplayString, hwCfgBackupPassword DisplayString, hwCfgBackupServerPath DisplayString, hwCfgBackupRowStatus RowStatus, hwCfgBackupResult DisplayString } -- 1.3.6.1.4.1.2011.6.10.1.3.7.1.1 hwCfgBackupIndex OBJECT-TYPE SYNTAX Integer32 (0..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique index value of a row in this table." ::= { hwCfgBackup2ServerEntry 1 } -- 1.3.6.1.4.1.2011.6.10.1.3.7.1.2 hwCfgBackupServerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The ip address of the FTP/TFTP/SFTP server to which to the device backup configuration automatically. Values of 0.0.0.0 or FF.FF.FF.FF are not permitted." ::= { hwCfgBackup2ServerEntry 2 } -- 1.3.6.1.4.1.2011.6.10.1.3.7.1.3 hwCfgBackupProtocol OBJECT-TYPE SYNTAX INTEGER { ftp(1), tftp(2), sftp(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The default protocol is ftp if no protocol is specified. And for other value of hwCfgOperateType, this object may be ignored by the implementation. " ::= { hwCfgBackup2ServerEntry 3 } -- 1.3.6.1.4.1.2011.6.10.1.3.7.1.4 hwCfgBackupUser OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "" ::= { hwCfgBackup2ServerEntry 4 } -- 1.3.6.1.4.1.2011.6.10.1.3.7.1.5 hwCfgBackupPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16 | 24 | 32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The password can be plain text or encripted text. If the password is plain text, its length should range from 0 to 16. If the password is encripted text, its length should be 24 or 32. When get the value of the field, the device will return a zero-length string." ::= { hwCfgBackup2ServerEntry 5 } -- 1.3.6.1.4.1.2011.6.10.1.3.7.1.6 hwCfgBackupServerPath OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "" ::= { hwCfgBackup2ServerEntry 6 } -- 1.3.6.1.4.1.2011.6.10.1.3.7.1.7 hwCfgBackupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " " ::= { hwCfgBackup2ServerEntry 7 } -- 1.3.6.1.4.1.2011.6.10.1.3.7.1.8 hwCfgBackupResult OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object is only for trap information, and does not support get and get-next operation." ::= { hwCfgBackup2ServerEntry 8 } -- ========================================================================== -- configuration lock group -- ========================================================================== -- 1.3.6.1.4.1.2011.6.10.1.4 hwCfgLock OBJECT IDENTIFIER ::= { hwConfigManObjects 4 } -- 1.3.6.1.4.1.2011.6.10.1.4.1 hwCfgOperateLockConfigDataStore OBJECT-TYPE SYNTAX INTEGER { inactive(1), active(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Config data unit lock/unlock controller,if set active(2),the lock will be locked if no one locked it before. if set inactive(1),the lock will be unlocked if the currunt user locked it before. " ::= { hwCfgLock 1 } -- 1.3.6.1.4.1.2011.6.10.1.4.2 hwCfgOperateLevelUsersTable OBJECT-TYPE SYNTAX SEQUENCE OF HwCfgOperateLevelUsersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table on users of configuration lock or level." ::= { hwCfgLock 2 } -- 1.3.6.1.4.1.2011.6.10.1.4.2.1 hwCfgOperateLevelUsersEntry OBJECT-TYPE SYNTAX HwCfgOperateLevelUsersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Users entity on lock or level of the configuration module." INDEX { hwCfgOperateLevelUsersSessionID } ::= { hwCfgOperateLevelUsersTable 1 } HwCfgOperateLevelUsersEntry ::= SEQUENCE { hwCfgOperateLevelUsersSessionID Integer32, hwCfgOperateLevelUsersSessionDesc DisplayString, hwCfgOperateLevelUsersName DisplayString, hwCfgOperateLevelUsersLockedTime DisplayString, hwCfgOperateLevelUsersIPAddr DisplayString, hwCfgOperateLevelUsersLastCfgTime DisplayString, hwCfgOperateLevelUsersTimeout Integer32 } -- 1.3.6.1.4.1.2011.6.10.1.4.2.1.1 hwCfgOperateLevelUsersSessionID OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "SessionID of users who have the configuration level or have locked the configuration." ::= { hwCfgOperateLevelUsersEntry 1 } -- 1.3.6.1.4.1.2011.6.10.1.4.2.1.2 hwCfgOperateLevelUsersSessionDesc OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Description of users who have the configuration level or have locked the configuration." ::= { hwCfgOperateLevelUsersEntry 2 } -- 1.3.6.1.4.1.2011.6.10.1.4.2.1.3 hwCfgOperateLevelUsersName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "UserName of users who have the configuration level or have locked the configuration." ::= { hwCfgOperateLevelUsersEntry 3 } -- 1.3.6.1.4.1.2011.6.10.1.4.2.1.4 hwCfgOperateLevelUsersLockedTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "LoginTime of users who have the configuration level or have locked the configuration." ::= { hwCfgOperateLevelUsersEntry 4 } -- 1.3.6.1.4.1.2011.6.10.1.4.2.1.5 hwCfgOperateLevelUsersIPAddr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "IP Address of users who have the configuration level or have locked the configuration." ::= { hwCfgOperateLevelUsersEntry 5 } -- 1.3.6.1.4.1.2011.6.10.1.4.2.1.6 hwCfgOperateLevelUsersLastCfgTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The last configurate Time of users who have the configuration level or have locked the configuration." ::= { hwCfgOperateLevelUsersEntry 6 } -- 1.3.6.1.4.1.2011.6.10.1.4.2.1.7 hwCfgOperateLevelUsersTimeout OBJECT-TYPE SYNTAX Integer32 (1..7200) MAX-ACCESS read-only STATUS current DESCRIPTION "Unlock without configuration seconds, 1-7200, the default is 30" ::= { hwCfgOperateLevelUsersEntry 7 } -- ========================================================================== -- configuration save group -- ========================================================================== -- 1.3.6.1.4.1.2011.6.10.2 hwConfigManNotifications OBJECT IDENTIFIER ::= { hwConfig 2 } -- 1.3.6.1.4.1.2011.6.10.2.1 hwCfgManEventlog NOTIFICATION-TYPE OBJECTS { hwCfgLogSrcCmd, hwCfgLogSrcData, hwCfgLogDesData, hwCfgLogTerminalUser, hwCfgLogCmdSrcAddress, hwCfgLogConfigChangeId, hwCfgLogTime, hwCfgLogCfgBaselineTime } STATUS current DESCRIPTION "If the system configuration is changed, a notification is generated." ::= { hwConfigManNotifications 1 } -- 1.3.6.1.4.1.2011.6.10.2.2 hwCfgOperateCompletion NOTIFICATION-TYPE OBJECTS { hwCfgOperateType, hwCfgOperateTime, hwCfgOperateState, hwCfgOperateEndTime } STATUS current DESCRIPTION "When a configuration operation has been done, a notification may be generated." ::= { hwConfigManNotifications 2 } -- 1.3.6.1.4.1.2011.6.10.2.3 hwCfgInconsistent NOTIFICATION-TYPE STATUS obsolete DESCRIPTION "When the system automatically detects that configurations of the AMB and the SMB are inconsistent, the trap is generated." ::= { hwConfigManNotifications 3 } -- 1.3.6.1.4.1.2011.6.10.2.4 hwCfgInconsistentResume NOTIFICATION-TYPE STATUS obsolete DESCRIPTION "When the system automatically detects that configurations of the AMB and the SMB change from inconsistent to consistent, the trap is generated." ::= { hwConfigManNotifications 4 } -- 1.3.6.1.4.1.2011.6.10.2.5 hwCfgB2STransferFail NOTIFICATION-TYPE OBJECTS { hwCfgBackupIndex, hwCfgBackupServerIp, hwCfgBackupProtocol } STATUS current DESCRIPTION "When the system failed to backup current configuration to specified server, this trap will generate to indicates the details information." ::= { hwConfigManNotifications 5 } -- 1.3.6.1.4.1.2011.6.10.2.6 hwCfgB2SOperate NOTIFICATION-TYPE STATUS current DESCRIPTION "When the system begin to backup current configuration to servers, this trap will generate." ::= { hwConfigManNotifications 6 } -- 1.3.6.1.4.1.2011.6.10.3 hwConfigManConformance OBJECT IDENTIFIER ::= { hwConfig 3 } -- 1.3.6.1.4.1.2011.6.10.3.1 hwConfigManCompliances OBJECT IDENTIFIER ::= { hwConfigManConformance 1 } -- 1.3.6.1.4.1.2011.6.10.3.1.1 hwConfigManCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities implementing the Huawei Configuration Management MIB" MODULE -- this module MANDATORY-GROUPS { hwCfgManLogGroup, hwCfgOperateGroup, hwCfgManNotificationGroup, hwCfgSaveGroup } OBJECT hwCfgOperateType SYNTAX ConfigOperationType WRITE-SYNTAX INTEGER { running2Startup(1), startup2Running(2), running2Net(3), net2Running(4), net2Startup(5), startup2Net(6) } DESCRIPTION "" ::= { hwConfigManCompliances 1 } -- 1.3.6.1.4.1.2011.6.10.3.2 hwConfigManGroups OBJECT IDENTIFIER ::= { hwConfigManConformance 2 } -- 1.3.6.1.4.1.2011.6.10.3.2.1 hwCfgManLogGroup OBJECT-GROUP OBJECTS { hwCfgRunModifiedLast, hwCfgRunSavedLast, hwCfgStartModifiedLast, hwCfgLogLimitedEntries, hwCfgLogDeletedEntries, hwCfgLogTime, hwCfgLogSrcCmd, hwCfgLogTerminalType, hwCfgLogTerminalNum, hwCfgLogTerminalUser, hwCfgLogTerminalLocation, hwCfgLogCmdSrcAddress, hwCfgLogVirHost, hwCfgLogServerAddress, hwCfgLogFile, hwCfgLogUserName, hwCfgLogWantBackup, hwCfgLogSrcData, hwCfgLogDesData, hwCfgLogConfigChangeId, hwCfgLogCfgBaselineTime } STATUS current DESCRIPTION "A collection of objects configuration log group." ::= { hwConfigManGroups 1 } -- 1.3.6.1.4.1.2011.6.10.3.2.2 hwCfgOperateGroup OBJECT-GROUP OBJECTS { hwCfgOperateGlobalEntryLimit, hwCfgOperateEntryAgeOutTime, hwCfgOperateType, hwCfgOperateProtocol, hwCfgOperateFileName, hwCfgOperateServerAddress, hwCfgOperateUserName, hwCfgOperateUserPassword, hwCfgOperateTime, hwCfgOperateEndNotificationSwitch, hwCfgOperateResultGlobalEntryLimit, hwCfgOperateState, hwCfgOperateRowStatus, hwCfgOperateServerPort, hwCfgOperateSourceAddress, hwCfgOperateSourceInterface, hwCfgOperateOnError,hwCfgOperateObjectType,hwCfgOperateVpnInstanceName,hwCfgOperateTotalFileLength, hwCfgOperateResultOptIndex, hwCfgOperateResultOpType, hwCfgOperateEndTime,hwCfgOperateTransferProgress,hwCfgOperateErrorReason, hwCfgModuleChangeTime, hwCfgOperateLockConfigDataStore, hwCfgOperateLevelUsersSessionID, hwCfgOperateLevelUsersSessionDesc, hwCfgOperateLevelUsersName, hwCfgOperateLevelUsersLockedTime, hwCfgOperateLevelUsersIPAddr,hwCfgOperateLevelUsersLastCfgTime,hwCfgOperateLevelUsersTimeout} STATUS current DESCRIPTION "A group of configuration operation." ::= { hwConfigManGroups 2 } -- 1.3.6.1.4.1.2011.6.10.3.2.3 hwCfgManNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { hwCfgManEventlog, hwCfgOperateCompletion ,hwCfgInconsistent, hwCfgInconsistentResume } STATUS current DESCRIPTION "Collection of notification objects." ::= { hwConfigManGroups 3 } -- 1.3.6.1.4.1.2011.6.10.3.2.4 hwCfgSaveGroup OBJECT-GROUP OBJECTS { hwCfgSaveAutoInterval, hwCfgSaveAutoTime, hwCfgSaveManualTime } STATUS current DESCRIPTION "A group of configuration operation." ::= { hwConfigManGroups 4 } END -- -- HUAWEI-CONFIG-MAN-MIB.mib --