-- ================================================================= -- Copyright (C) 2003 by HUAWEI TECHNOLOGIES. All rights reserved. -- -- Description: Huawei PING extend MIB File(extended from DISMAN-PING-MIB RFC2925) -- Reference: -- Version: V1.2 -- History: -- Lv zhenfeng, 2003.08, Initial Version -- Gao Long, 2004-12-16, Added 5 field in hwPingJitterStatsTable -- Pei Gangqiang, 2005-03-16, added the hwpingUdpServerVPNInstance -- ================================================================= HUAWEI-DISMAN-PING-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, mib-2, Integer32, OBJECT-IDENTITY, Gauge32, Counter32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, DateAndTime,DisplayString,TimeStamp,Unsigned32,RowStatus FROM SNMPv2-TC pingCtlEntry,pingCtlOwnerIndex,pingCtlTestName FROM DISMAN-PING-MIB hwDatacomm FROM HUAWEI-MIB; hwDismanPing MODULE-IDENTITY LAST-UPDATED "200308130000Z" ORGANIZATION "Huawei Technologies co.,Ltd." CONTACT-INFO " R&D BeiJing, Huawei Technologies co.,Ltd. Huawei Bld.,NO.3 Xinxi Rd., Shang-Di Information Industry Base, Hai-Dian District Beijing P.R. China Zip:100085 Http://www.huawei.com E-mail:support@huawei.com " DESCRIPTION "This private mib file includes the test information of the device. It is supplementary for DISMAN-PING-MIB(rfc2925). By setting more parameters you can finish more types test such as tcp, udp, dlsw, dhcp, ftp, http and jitter . This mib contains 5 tables: hwPingCtlTable, hwpingResultsTable, hwPingJitterStatsTable, hwPingTcpServerTable, hwPingUdpServerTable, and 3 nodes: hwPingMIBVersion, hwPingAgentEnable, hwPingServerEnable. " ::= { hwDatacomm 28 } hwPingObjects OBJECT IDENTIFIER ::= { hwDismanPing 1 } -- Textual Conventions InetAddress ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Denotes a generic Internet address. An InetAddress value is always interpreted within the context of an InetAddressType value. The InetAddressType object which defines the context must be registered immediately before the object which uses the InetAddress textual convention. In other words, the object identifiers for the InetAddressType object and the InetAddress object MUST have the same length and the last sub-identifier of the InetAddressType object MUST be 1 less than the last sub-identifier of the InetAddress object. When this textual convention is used as the syntax of an index object, there may be issues with the limit of 128 sub-identifiers specified in SMIv2, STD 58. In this case, the OBJECT-TYPE declaration MUST include a 'SIZE' clause to limit the number of potential instance sub-identifiers." SYNTAX OCTET STRING (SIZE (0..255)) -- The registration node (point) for huawei ping implementation types hwPingImplementationTypeDomains OBJECT IDENTIFIER ::= { hwDismanPing 2 } hwpingUdpEcho OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that an implementation is using the UDP based echo server. Notes: The hwpingCtlTargetPort and hwpingCtlSourcePort need to be set." ::= { hwPingImplementationTypeDomains 1 } hwpingTcpconnect OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that an implementation is attempting to connect to a TCP port in order to calculate a round trip time. Notes: The hwpingCtlTargetPort and hwpingCtlSourcePort need to be set." ::= { hwPingImplementationTypeDomains 2 } hwpingjitter OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that an implementation is using udp for packet transfers. 'jitter' will cause the PING application to perform delay variance analysis." ::= { hwPingImplementationTypeDomains 3 } hwpingHttp OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that an implementation is using udp for name resolution, tcp connect and tcp data transfer mechanisms for HTTP data download from a particular HTTP Server. it cause the PING application to perform a download of the object specified in the URL" ::= { hwPingImplementationTypeDomains 4 } hwpingdlsw OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that an implementation is using tcp for sending keepalives. 'dlsw' will cause the PING application to perform a keepalive operation to measure the response time of a DLSw peer." ::= { hwPingImplementationTypeDomains 5 } hwpingdhcp OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that an implementation is using udp for sending dhcp requests. 'dhcp' will cause the PING application to perform an IP Address lease request/teardown operation." ::= { hwPingImplementationTypeDomains 6 } hwpingftp OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that an implementation is using tcp for connect & data transfer. " ::= { hwPingImplementationTypeDomains 7 } -- MIB contains three groups hwPingMIBVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Huawei PING MIB version string. The format will be: 'Version.Release.Patch: Textual-Description' For example: '1.0.0: Initial Ping MIB'" ::= { hwPingObjects 1 } hwPingCtlTable OBJECT-TYPE SYNTAX SEQUENCE OF HWPingCtlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the ping Control Extend Table for providing, via SNMP, the capability of performing ping operations at a remote host. " ::= { hwPingObjects 2 } hwPingCtlEntry OBJECT-TYPE SYNTAX HWPingCtlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the hwpingCtlTable. The operation of this table is same as that of pingResultsTable." AUGMENTS { pingCtlEntry } ::= { hwPingCtlTable 1 } HWPingCtlEntry ::= SEQUENCE { hwpingCtlTargetPort Integer32, hwpingCtlSourcePort Integer32, hwpingCtlTTL Integer32, hwpingCtlJitterAdminInterval Integer32, hwpingCtlJitterAdminNumPackets Integer32, hwpingCtlHttpOperationType INTEGER, hwpingCtlHttpOperationString DisplayString, hwpingCtlFtpOperationType INTEGER, hwpingCtlFtpUsername DisplayString, hwpingCtlFtpPassword DisplayString, hwpingCtlFtpOperationString DisplayString, hwpingCtlVPNInstance DisplayString } hwpingCtlTargetPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the target's port number. This object is applicable to udpEcho, tcpConnect and jitter probes." DEFVAL { 0 } ::= { hwPingCtlEntry 1 } hwpingCtlSourcePort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the source's port number. If this object is not specified, the application will get a port allocated by the system. This object is applicable to all probes except dns, dlsw." DEFVAL { 0 } ::= { hwPingCtlEntry 2 } hwpingCtlTTL OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the value to store in the TTL Field in the IP packet used to encapsulate the ping probe." DEFVAL { 20 } ::= { hwPingCtlEntry 3 } hwpingCtlJitterAdminInterval OBJECT-TYPE SYNTAX Integer32 UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This value represents the inter-packet delay between packets and is in milliseconds. This value is currently used for Jitter probe. This object is applicable to jitter probe only." DEFVAL { 20 } ::= { hwPingCtlEntry 4 } hwpingCtlJitterAdminNumPackets OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This value represents the number of packets that need to be transmitted. This value is currently used for Jitter probe. This object is applicable to jitter probe only." DEFVAL { 10 } ::= { hwPingCtlEntry 5 } hwpingCtlHttpOperationType OBJECT-TYPE SYNTAX INTEGER{ get(1), post(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Http operation type:get or post." DEFVAL { get } ::= { hwPingCtlEntry 6 } hwpingCtlHttpOperationString OBJECT-TYPE SYNTAX DisplayString(SIZE(0..240)) MAX-ACCESS read-create STATUS current DESCRIPTION "Http operation string.for example,if you choose get operation type,the string will be url , home page and http version." DEFVAL { "" } ::= { hwPingCtlEntry 7 } hwpingCtlFtpOperationType OBJECT-TYPE SYNTAX INTEGER{ get(1), put(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Ftp operation type:get or put" DEFVAL { get } ::= { hwPingCtlEntry 8 } hwpingCtlFtpUsername OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Ftp username" DEFVAL { "" } ::= { hwPingCtlEntry 9 } hwpingCtlFtpPassword OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Ftp password." DEFVAL { "" } ::= { hwPingCtlEntry 10 } hwpingCtlFtpOperationString OBJECT-TYPE SYNTAX DisplayString(SIZE(0..240)) MAX-ACCESS read-create STATUS current DESCRIPTION "Ftp operation string.If the ftp operation type is get,the string will be file name that you will get from ftp server." DEFVAL { "" } ::= { hwPingCtlEntry 11 } hwpingCtlVPNInstance OBJECT-TYPE SYNTAX DisplayString(SIZE(0..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "This field is used to specify the VPN name in which the PING operation will be userd. The agent will use the field to identify the VPN routing Table for this operation." DEFVAL { "" } ::= { hwPingCtlEntry 12 } -- HUAWEI Ping Results Table hwpingResultsTable OBJECT-TYPE SYNTAX SEQUENCE OF HWPingResultsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the Ping Results Extend Table for providing the capability of performing ping operations at a remote host. The results of these operations are stored in the hwpingResultsTable . The operation of this table is same as that of pingResultsTable." ::= { hwPingObjects 3 } hwpingResultsEntry OBJECT-TYPE SYNTAX HWPingResultsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The operation of this table is same as that of pingResultsTable." INDEX { pingCtlOwnerIndex, pingCtlTestName } ::= { hwpingResultsTable 1 } HWPingResultsEntry ::= SEQUENCE { hwpingResultsRttNumDisconnects Gauge32, hwpingResultsRttTimeouts Gauge32, hwpingResultsRttBusies Gauge32, hwpingResultsRttNoConnections Gauge32, hwpingResultsRttDrops Gauge32, hwpingResultsRttSequenceErrors Gauge32, hwpingResultsRttStatsErrors Gauge32, hwpingResultsMaxDelaySD Gauge32, hwpingResultsMaxDelayDS Gauge32, hwpingResultsLostPacketRatio Gauge32 } hwpingResultsRttNumDisconnects OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "When the pingCtlType is 'icmpecho' , this object represents the number of times that the target or hop along the path to a target became disconnected. For all other values of pingCtlType, this object will remain zero. For connectionless protocols this has no meaning, and will consequently remain 0. Since this error does not indicate any information about the failure of an PING operation, no response time information for this instance will be recorded in the appropriate objects." ::= { hwpingResultsEntry 1 } hwpingResultsRttTimeouts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of occasions when a PING operation was not completed before a timeout occurred, i.e. pingCtlTimeOut was exceeded. Since the PING operation was never completed, the completion time of these operations are not accumulated." ::= { hwpingResultsEntry 2 } hwpingResultsRttBusies OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of occasions when a PING operation could not be initiated because a previous PING operation has not been completed. When the pingCtlType is 'pathEcho' this can occur for both connection oriented protocols and connectionless protocols. When the initiation of a new operation cannot be started, this object will be incremented and the operation will be omitted. (The next operation will start at the next Frequency). " ::= { hwpingResultsEntry 3 } hwpingResultsRttNoConnections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "When the pingCtlType is 'icmpecho' this is the number of occasions when a PING operation could not be initiated because the connection to the target has not been established. For all other pingCtlTypes this object will remain zero." ::= { hwpingResultsEntry 4 } hwpingResultsRttDrops OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of occasions when a PING operation could not be initiated because some necessary internal resource (for example memory) was not available,or the operation completion could not be recognized." ::= { hwpingResultsEntry 5 } hwpingResultsRttSequenceErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "When the pingCtlType is 'icmpecho' this is the number of PING operation completions received with an unexpected sequence identifier. For all other values of pingCtlType this object will remain zero. When this has occurred some of the possible reasons may be: - a duplicate packet was received - a response was received after it had timed-out - a corrupted packet was received and was not detected " ::= { hwpingResultsEntry 6 } hwpingResultsRttStatsErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of some other errors" ::= { hwpingResultsEntry 7 } hwpingResultsMaxDelaySD OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION " The maximal delay from source device to destination device. Currently this value is only used for JITTER test, and this value must be 0 in other type test. In JITTER test, if destination system time is not valid, the SD delay may be set 0." ::= { hwpingResultsEntry 8 } hwpingResultsMaxDelayDS OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION " The maximal delay from destination device to source device. Currently this value is only used for JITTER test, and this value is 0 in other type test. In JITTER test, if destination system time is not valid, the DS delay may be set 0." ::= { hwpingResultsEntry 9 } hwpingResultsLostPacketRatio OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object reflects the drop rate of HWPing test. For example, this value is 30 that means source device only had received 70% packets of total sent packets." ::= { hwpingResultsEntry 10 } -- ================================================================= -- HUAWEI Jitter Statistics Table -- ================================================================= hwPingJitterStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF HWPingJitterStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table which contains the status of latest Jitter operation." ::= { hwPingObjects 4 } hwPingJitterStatsEntry OBJECT-TYPE SYNTAX HWPingJitterStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table which contains the status of latest Jitter operation. This entry is created only if the pingCtlType is hwpingjitter. " INDEX { pingCtlOwnerIndex, pingCtlTestName } ::= { hwPingJitterStatsTable 1 } HWPingJitterStatsEntry ::= SEQUENCE { hwPingJitterStatsNumOfRTT Counter32, hwPingJitterStatsMinOfPositivesSD Gauge32, hwPingJitterStatsMaxOfPositivesSD Gauge32, hwPingJitterStatsNumOfPositivesSD Gauge32, hwPingJitterStatsSumOfPositivesSD Gauge32, hwPingJitterStatsSum2PositivesSD Gauge32, hwPingJitterStatsMinOfNegativesSD Gauge32, hwPingJitterStatsMaxOfNegativesSD Gauge32, hwPingJitterStatsNumOfNegativesSD Gauge32, hwPingJitterStatsSumOfNegativesSD Gauge32, hwPingJitterStatsSum2NegativesSD Gauge32, hwPingJitterStatsMinOfPositivesDS Gauge32, hwPingJitterStatsMaxOfPositivesDS Gauge32, hwPingJitterStatsNumOfPositivesDS Gauge32, hwPingJitterStatsSumOfPositivesDS Gauge32, hwPingJitterStatsSum2PositivesDS Gauge32, hwPingJitterStatsMinOfNegativesDS Gauge32, hwPingJitterStatsMaxOfNegativesDS Gauge32, hwPingJitterStatsNumOfNegativesDS Gauge32, hwPingJitterStatsSumOfNegativesDS Gauge32, hwPingJitterStatsSum2NegativesDS Gauge32, hwPingJitterStatsPacketLossSD Gauge32, hwPingJitterStatsPacketLossDS Gauge32, hwPingJitterStatsAvePositivesSD Gauge32, hwPingJitterStatsAveNegativesSD Gauge32, hwPingJitterStatsAvePositivesDS Gauge32, hwPingJitterStatsAveNegativesDS Gauge32, hwPingJitterStatsPktLossUnknown Gauge32 } hwPingJitterStatsNumOfRTT OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Jitter's that are successfully measured." ::= { hwPingJitterStatsEntry 1 } hwPingJitterStatsMinOfPositivesSD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum of all positive jitter values from packets sent from source to destination." ::= { hwPingJitterStatsEntry 2 } hwPingJitterStatsMaxOfPositivesSD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of all positive jitter values from packets sent from source to destination." ::= { hwPingJitterStatsEntry 3 } hwPingJitterStatsNumOfPositivesSD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of number of all positive jitter values from packets sent from source to destination." ::= { hwPingJitterStatsEntry 4 } hwPingJitterStatsSumOfPositivesSD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of RTT's of all positive jitter values from packets sent from source to destination." ::= { hwPingJitterStatsEntry 5 } hwPingJitterStatsSum2PositivesSD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of square of RTT's of all positive jitter values from packets sent from source to destination." ::= { hwPingJitterStatsEntry 6 } hwPingJitterStatsMinOfNegativesSD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum of absolute values of all negative jitter values from packets sent from source to destination." ::= { hwPingJitterStatsEntry 7 } hwPingJitterStatsMaxOfNegativesSD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of absolute values of all negative jitter values from packets sent from source to destination." ::= { hwPingJitterStatsEntry 8 } hwPingJitterStatsNumOfNegativesSD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of number of all negative jitter values from packets sent from source to destination." ::= { hwPingJitterStatsEntry 9 } hwPingJitterStatsSumOfNegativesSD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of all negative jitter values from packets sent from source to destination." ::= { hwPingJitterStatsEntry 10 } hwPingJitterStatsSum2NegativesSD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of square of RTT's of all negative jitter values from packets sent from source to destination." ::= { hwPingJitterStatsEntry 11 } hwPingJitterStatsMinOfPositivesDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum of all positive jitter values from packets sent from destination to source." ::= { hwPingJitterStatsEntry 12 } hwPingJitterStatsMaxOfPositivesDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of all positive jitter values from packets sent from destination to source." ::= { hwPingJitterStatsEntry 13 } hwPingJitterStatsNumOfPositivesDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of number of all positive jitter values from packets sent from destination to source." ::= { hwPingJitterStatsEntry 14 } hwPingJitterStatsSumOfPositivesDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of RTT's of all positive jitter values from packets sent from destination to source." ::= { hwPingJitterStatsEntry 15 } hwPingJitterStatsSum2PositivesDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of squares of RTT's of all positive jitter values from packets sent from destination to source." ::= { hwPingJitterStatsEntry 16 } hwPingJitterStatsMinOfNegativesDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum of all negative jitter values from packets sent from destination to source." ::= { hwPingJitterStatsEntry 17 } hwPingJitterStatsMaxOfNegativesDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of all negative jitter values from packets sent from destination to source." ::= { hwPingJitterStatsEntry 18 } hwPingJitterStatsNumOfNegativesDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of number of all negative jitter values from packets sent from destination to source." ::= { hwPingJitterStatsEntry 19 } hwPingJitterStatsSumOfNegativesDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of RTT's of all negative jitter values from packets sent from destination to source." ::= { hwPingJitterStatsEntry 20 } hwPingJitterStatsSum2NegativesDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of squares of RTT's of all negative jitter values from packets sent from destination to source." ::= { hwPingJitterStatsEntry 21 } hwPingJitterStatsPacketLossSD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets lost when sent from source to destination." ::= { hwPingJitterStatsEntry 22 } hwPingJitterStatsPacketLossDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets lost when sent from destination to source." ::= { hwPingJitterStatsEntry 23 } hwPingJitterStatsAvePositivesSD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of RTT's of all positive jitter values from packets sent from source to destination." ::= { hwPingJitterStatsEntry 24 } hwPingJitterStatsAveNegativesSD OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of all negative jitter values from packets sent from source to destination." ::= { hwPingJitterStatsEntry 25 } hwPingJitterStatsAvePositivesDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of RTT's of all positive jitter values from packets sent from destination to source." ::= { hwPingJitterStatsEntry 26 } hwPingJitterStatsAveNegativesDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of RTT's of all negative jitter values from packets sent from destination to source." ::= { hwPingJitterStatsEntry 27 } hwPingJitterStatsPktLossUnknown OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION " The number of packets which lost but not knowing result ." ::= { hwPingJitterStatsEntry 28 } hwPingAgentEnable OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable Huawei PING agent function" ::= { hwPingObjects 5 } -- ================================================================= -- HUAWEI tcp server configuration information Statistics Table -- ================================================================= hwPingTcpServerTable OBJECT-TYPE SYNTAX SEQUENCE OF HWPingTcpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table which contains the status of hwping tcp server configuration information." ::= { hwPingObjects 6 } hwPingTcpServerEntry OBJECT-TYPE SYNTAX HWPingTcpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table which contains the status of hwping tcp server configuration information. This entry is includeed not only the tcp server ip address but also the tcp server udp port. If used for VPN it is also included the VPN name." INDEX { hwPingTcpServerIpAddress, hwPingTcpServerPort, hwpingTcpServerVPNInstance } ::= { hwPingTcpServerTable 1 } HWPingTcpServerEntry ::= SEQUENCE { hwPingTcpServerIpAddress InetAddress, hwPingTcpServerPort Integer32, hwpingTcpServerVPNInstance DisplayString, hwpingTcpServerRowStatus RowStatus } hwPingTcpServerIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the tcp server's ip address. This object and hwpingTcpServerPort is hwPingTcpServerTable index." ::= { hwPingTcpServerEntry 1 } hwPingTcpServerPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the tcp server's port number. This object and hwPingTcpServerIpAddress is hwPingTcpServerTable index." ::= { hwPingTcpServerEntry 2 } hwpingTcpServerVPNInstance OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This field is used to specify the VPN name in which the PING operation will be userd. The TCP server will use the field to identify the VPN routing Table for this operation." ::= { hwPingTcpServerEntry 3 } hwpingTcpServerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows entries to be created and deleted in the hwPingTcpServerTable. A value MUST be specified for hwPingTcpServerIpAddress and hwPingTcpServerPort prior to a transition to active(1) state being accepted." REFERENCE "See definition of RowStatus in RFC 2579, 'Textual Conventions for SMIv2.'" ::= { hwPingTcpServerEntry 4 } hwPingUdpServerTable OBJECT-TYPE SYNTAX SEQUENCE OF HWPingUdpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table which contains the status of hwping udp server configuration information." ::= { hwPingObjects 7 } hwPingUdpServerEntry OBJECT-TYPE SYNTAX HWPingUdpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table which contains the status of hwping udp server configuration information. This entry is includeed not only the udp server ip address but also the udp server udp port.If used for VPN it is also included the VPN name." INDEX { hwPingUdpServerIpAddress, hwPingUdpServerPort, hwpingUdpServerVPNInstance } ::= { hwPingUdpServerTable 1 } HWPingUdpServerEntry ::= SEQUENCE { hwPingUdpServerIpAddress InetAddress, hwPingUdpServerPort Integer32, hwpingUdpServerVPNInstance DisplayString, hwpingUdpServerRowStatus RowStatus } hwPingUdpServerIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the udp server's ip address. This object and hwpingUdpServerPort is hwPingUdpServerEntry index." ::= { hwPingUdpServerEntry 1 } hwPingUdpServerPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the udp server's port number. This object and hwPingUdpServerIpAddress is hwPingUdpServerEntry index." ::= { hwPingUdpServerEntry 2 } hwpingUdpServerVPNInstance OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This field is used to specify the VPN name in which the PING operation will be userd. The UDP server will use the field to identify the VPN routing Table for this operation." ::= { hwPingUdpServerEntry 3 } hwpingUdpServerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows entries to be created and deleted in the hwPingUdpServerTable. A value MUST be specified for hwPingUdpServerIpAddress and hwPingUdpServerPort prior to a transition to active(1) state being accepted." REFERENCE "See definition of RowStatus in RFC 2579, 'Textual Conventions for SMIv2.'" ::= { hwPingUdpServerEntry 4 } hwPingServerEnable OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable Huawei PING server function" ::= { hwPingObjects 8 } END