-- ============================================================================ -- Copyright (C) 2007 by HUAWEI TECHNOLOGIES. All rights reserved. -- -- Description: PIM-STD-MIB.my , this Mib module for management of -- the Protocol Independent Multicast (PIM) protocols for PIM routers. -- Reference: -- Version: V1.0 -- History: -- created by wangyanwei 63315 2007-04-24 -- -- ============================================================================ PIM-STD-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, mib-2, NOTIFICATION-TYPE, Unsigned32, Counter32, Counter64, Gauge32, TimeTicks FROM SNMPv2-SMI -- [RFC2578] TEXTUAL-CONVENTION, RowStatus, TruthValue, StorageType FROM SNMPv2-TC -- [RFC2579] MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF -- [RFC2580] InterfaceIndexOrZero, InterfaceIndex FROM IF-MIB -- [RFC2863] InetAddressType, InetAddressPrefixLength, InetAddress, InetVersion FROM INET-ADDRESS-MIB -- [RFC4001] IANAipRouteProtocol FROM IANA-RTPROTO-MIB; -- [RTPROTO] pimStdMIB MODULE-IDENTITY LAST-UPDATED "200711020000Z" -- 2 November 2007 ORGANIZATION "IETF Protocol Independent Multicast (PIM) Working Group" CONTACT-INFO "Email: pim@ietf.org WG charter: http://www.ietf.org/html.charters/pim-charter.html" DESCRIPTION "The MIB module for management of PIM routers. Copyright (C) The IETF Trust (2007). This version of this MIB module is part of RFC 5060; see the RFC itself for full legal notices." REVISION "200711020000Z" -- 2 November 2007 DESCRIPTION "Initial version, published as RFC 5060." ::= { mib-2 157 } -- -- Textual Conventions -- PimMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The PIM mode in which a group is operating. none(1) The group is not using PIM, which may be the case if, for example, it is a link-local or unroutable group address. ssm(2) Source-Specific Multicast (SSM) with PIM Sparse Mode. asm(3) Any Source Multicast (ASM) with PIM Sparse Mode. bidir(4) Bidirectional PIM. dm(5) PIM Dense Mode. other(6) Any other PIM mode." SYNTAX INTEGER { none(1), ssm(2), asm(3), bidir(4), dm(5), other(6) } PimGroupMappingOriginType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The mechanism by which a PIM group mapping was learned. fixed(1) Link-local or unroutable group mappings. configRp(2) Local static RP configuration. configSsm(3) Local SSM Group configuration. bsr(4) The PIM Bootstrap Router (BSR) mechanism. autoRP(5) Cisco's Auto-RP mechanism. embedded(6) The Embedded-RP mechanism where the RP address is embedded in the multicast group address. other(7) Any other mechanism." REFERENCE "RFC 3569, RFC 3956, and RFC 5059" SYNTAX INTEGER { fixed(1), configRp(2), configSsm(3), bsr(4), autoRP(5), embedded(6), other(7) } -- -- Top-level structure -- pimNotifications OBJECT IDENTIFIER ::= { pimStdMIB 0 } pim OBJECT IDENTIFIER ::= { pimStdMIB 1 } pimKeepalivePeriod OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The duration of the Keepalive Timer. This is the period during which the PIM router will maintain (S,G) state in the absence of explicit (S,G) local membership or (S,G) join messages received to maintain it. This timer period is called the Keepalive_Period in the PIM-SM specification. It is called the SourceLifetime in the PIM-DM specification. The storage type of this object is determined by pimDeviceConfigStorageType." REFERENCE "RFC 4601 section 4.11" DEFVAL { 210 } ::= { pim 14 } pimRegisterSuppressionTime OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The duration of the Register Suppression Timer. This is the period during which a PIM Designated Router (DR) stops sending Register-encapsulated data to the Rendezvous Point (RP) after receiving a Register-Stop message. This object is used to run timers both at the DR and at the RP. This timer period is called the Register_Suppression_Time in the PIM-SM specification. The storage type of this object is determined by pimDeviceConfigStorageType." REFERENCE "RFC 4601 section 4.11" DEFVAL { 60 } ::= { pim 15 } pimStarGEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in the pimStarGTable." ::= { pim 16 } pimStarGIEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in the pimStarGITable." ::= { pim 17 } pimSGEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in the pimSGTable." ::= { pim 18 } pimSGIEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in the pimSGITable." ::= { pim 19 } pimSGRptEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in the pimSGRptTable." ::= { pim 20 } pimSGRptIEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in the pimSGRptITable." ::= { pim 21 } pimOutAsserts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Asserts sent by this router. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example, when the device is rebooted." REFERENCE "RFC 4601 section 4.6" ::= { pim 22 } pimInAsserts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Asserts received by this router. Asserts are multicast to all routers on a network. This counter is incremented by all routers that receive an assert, not only those routers that are contesting the assert. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example, when the device is rebooted." REFERENCE "RFC 4601 section 4.6" ::= { pim 23 } pimLastAssertInterface OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The interface on which this router most recently sent or received an assert, or zero if this router has not sent or received an assert." REFERENCE "RFC 4601 section 4.6" ::= { pim 24 } pimLastAssertGroupAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of the multicast group address in the most recently sent or received assert. If this router has not sent or received an assert, then this object is set to unknown(0)." ::= { pim 25 } pimLastAssertGroupAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The multicast group address in the most recently sent or received assert. The InetAddressType is given by the pimLastAssertGroupAddressType object." ::= { pim 26 } pimLastAssertSourceAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of the source address in the most recently sent or received assert. If the most recent assert was (*,G), or if this router has not sent or received an assert, then this object is set to unknown(0)." ::= { pim 27 } pimLastAssertSourceAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The source address in the most recently sent or received assert. The InetAddressType is given by the pimLastAssertSourceAddressType object." ::= { pim 28 } pimNeighborLossNotificationPeriod OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum time that must elapse between pimNeighborLoss notifications originated by this router. The maximum value 65535 represents an 'infinite' time, in which case, no pimNeighborLoss notifications are ever sent. The storage type of this object is determined by pimDeviceConfigStorageType." DEFVAL { 0 } ::= { pim 29 } pimNeighborLossCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of neighbor loss events that have occurred. This counter is incremented when the neighbor timer expires, and the router has no other neighbors on the same interface with the same IP version and a lower IP address than itself. This counter is incremented whenever a pimNeighborLoss notification would be generated. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example, when the device is rebooted." REFERENCE "RFC 4601 section 4.3.2" ::= { pim 30 } pimInvalidRegisterNotificationPeriod OBJECT-TYPE SYNTAX Unsigned32 (10..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum time that must elapse between pimInvalidRegister notifications originated by this router. The default value of 65535 represents an 'infinite' time, in which case, no pimInvalidRegister notifications are ever sent. The non-zero minimum allowed value provides resilience against propagation of denial-of-service attacks from the data and control planes to the network management plane. The storage type of this object is determined by pimDeviceConfigStorageType." DEFVAL { 65535 } ::= { pim 31 } pimInvalidRegisterMsgsRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of invalid PIM Register messages that have been received by this device. A PIM Register message is invalid if either o the destination address of the Register message does not match the Group to RP mapping on this device, or o this device believes the group address to be within an SSM address range, but this Register implies ASM usage. These conditions can occur transiently while RP mapping changes propagate through the network. If this counter is incremented repeatedly over several minutes, then there is a persisting configuration error that requires correction. The active Group to RP mapping on this device is specified by the object pimGroupMappingPimMode. If there is no such mapping, then the object pimGroupMappingPimMode is absent. The RP address contained in the invalid Register is pimInvalidRegisterRp. Multicast data carried by invalid Register messages is discarded. The discarded data is from a source directly connected to pimInvalidRegisterOrigin, and is addressed to pimInvalidRegisterGroup. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example, when the device is rebooted." REFERENCE "RFC 4601 section 4.4.2, RFC 3569, and 'IP Multicast MIB' (August 2007) ipMcastSsmRangeTable" ::= { pim 32 } pimInvalidRegisterAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type stored in pimInvalidRegisterOrigin, pimInvalidRegisterGroup, and pimInvalidRegisterRp. If no invalid Register messages have been received, then this object is set to unknown(0)." ::= { pim 33 } pimInvalidRegisterOrigin OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The source address of the last invalid Register message received by this device." ::= { pim 34 } pimInvalidRegisterGroup OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IP multicast group address to which the last invalid Register message received by this device was addressed." ::= { pim 35 } pimInvalidRegisterRp OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The RP address to which the last invalid Register message received by this device was delivered." ::= { pim 36 } pimInvalidJoinPruneNotificationPeriod OBJECT-TYPE SYNTAX Unsigned32 (10..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum time that must elapse between pimInvalidJoinPrune notifications originated by this router. The default value of 65535 represents an 'infinite' time, in which case, no pimInvalidJoinPrune notifications are ever sent. The non-zero minimum allowed value provides resilience against propagation of denial-of-service attacks from the control plane to the network management plane. The storage type of this object is determined by pimDeviceConfigStorageType." DEFVAL { 65535 } ::= { pim 37 } pimInvalidJoinPruneMsgsRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of invalid PIM Join/Prune messages that have been received by this device. A PIM Join/Prune message is invalid if either o the Group to RP mapping specified by this message does not match the Group to RP mapping on this device, or o this device believes the group address to be within an SSM address range, but this Join/Prune (*,G) or (S,G,rpt) implies ASM usage. These conditions can occur transiently while RP mapping changes propagate through the network. If this counter is incremented repeatedly over several minutes, then there is a persisting configuration error that requires correction. The active Group to RP mapping on this device is specified by the object pimGroupMappingPimMode. If there is no such mapping, then the object pimGroupMappingPimMode is absent. The RP address contained in the invalid Join/Prune is pimInvalidJoinPruneRp. Invalid Join/Prune messages are discarded. This may result in loss of multicast data affecting listeners downstream of pimInvalidJoinPruneOrigin, for multicast data addressed to pimInvalidJoinPruneGroup. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example, when the device is rebooted." REFERENCE "RFC 4601 section 4.5.2, RFC 3569, and 'IP Multicast MIB' (August 2007) ipMcastSsmRangeTable" ::= { pim 38 } pimInvalidJoinPruneAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type stored in pimInvalidJoinPruneOrigin, pimInvalidJoinPruneGroup, and pimInvalidJoinPruneRp. If no invalid Join/Prune messages have been received, this object is set to unknown(0)." ::= { pim 39 } pimInvalidJoinPruneOrigin OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The source address of the last invalid Join/Prune message received by this device." ::= { pim 40 } pimInvalidJoinPruneGroup OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IP multicast group address carried in the last invalid Join/Prune message received by this device." ::= { pim 41 } pimInvalidJoinPruneRp OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The RP address carried in the last invalid Join/Prune message received by this device." ::= { pim 42 } pimRPMappingNotificationPeriod OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum time that must elapse between pimRPMappingChange notifications originated by this router. The default value of 65535 represents an 'infinite' time, in which case, no pimRPMappingChange notifications are ever sent. The storage type of this object is determined by pimDeviceConfigStorageType." DEFVAL { 65535 } ::= { pim 43 } pimRPMappingChangeCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of changes to active RP mappings on this device. Information about active RP mappings is available in pimGroupMappingTable. Only changes to active mappings cause this counter to be incremented. That is, changes that modify the pimGroupMappingEntry with the highest precedence for a group (lowest value of pimGroupMappingPrecedence). Such changes may result from manual configuration of this device, or from automatic RP mapping discovery methods including the PIM Bootstrap Router (BSR) mechanism. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example, when the device is rebooted." REFERENCE "RFC 5059" ::= { pim 44 } pimInterfaceElectionNotificationPeriod OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum time that must elapse between pimInterfaceElection notifications originated by this router. The default value of 65535 represents an 'infinite' time, in which case, no pimInterfaceElection notifications are ever sent. The storage type of this object is determined by pimDeviceConfigStorageType." DEFVAL { 65535 } ::= { pim 45 } pimInterfaceElectionWinCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this device has been elected DR or DF on any interface. Elections occur frequently on newly-active interfaces, as triggered Hellos establish adjacencies. This counter is not incremented for elections on an interface until the first periodic Hello has been sent. If this router is the DR or DF at the time of sending the first periodic Hello after interface activation, then this counter is incremented (once) at that time. Discontinuities in the value of this counter can occur at re-initialization of the management system, for example, when the device is rebooted." REFERENCE "RFC 4601 section 4.3.2 and RFC 5015 section 3.5.2" ::= { pim 46 } pimRefreshInterval OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The interval between successive State Refresh messages sent by an Originator. This timer period is called the RefreshInterval in the PIM-DM specification. This object is used only by PIM-DM. The storage type of this object is determined by pimDeviceConfigStorageType." REFERENCE "RFC 3973 section 4.8" DEFVAL { 60 } ::= { pim 47 } pimDeviceConfigStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-write STATUS current DESCRIPTION "The storage type used for the global PIM configuration of this device, comprised of the objects listed below. If this storage type takes the value 'permanent', write-access to the listed objects need not be allowed. The objects described by this storage type are: pimKeepalivePeriod, pimRegisterSuppressionTime, pimNeighborLossNotificationPeriod, pimInvalidRegisterNotificationPeriod, pimInvalidJoinPruneNotificationPeriod, pimRPMappingNotificationPeriod, pimInterfaceElectionNotificationPeriod, and pimRefreshInterval." DEFVAL { nonVolatile } ::= { pim 48 } -- -- The PIM Interface Table -- pimInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF PimInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the router's PIM interfaces. PIM is enabled on all interfaces listed in this table." ::= { pim 1 } pimInterfaceEntry OBJECT-TYPE SYNTAX PimInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimInterfaceTable. This entry is preserved on agent restart." INDEX { pimInterfaceIfIndex, pimInterfaceIPVersion } ::= { pimInterfaceTable 1 } PimInterfaceEntry ::= SEQUENCE { pimInterfaceIfIndex InterfaceIndex, pimInterfaceIPVersion InetVersion, pimInterfaceAddressType InetAddressType, pimInterfaceAddress InetAddress, pimInterfaceGenerationIDValue Unsigned32, pimInterfaceDR InetAddress, pimInterfaceDRPriority Unsigned32, pimInterfaceDRPriorityEnabled TruthValue, pimInterfaceHelloInterval Unsigned32, pimInterfaceTrigHelloInterval Unsigned32, pimInterfaceHelloHoldtime Unsigned32, pimInterfaceJoinPruneInterval Unsigned32, pimInterfaceJoinPruneHoldtime Unsigned32, pimInterfaceDFElectionRobustness Unsigned32, pimInterfaceLanDelayEnabled TruthValue, pimInterfacePropagationDelay Unsigned32, pimInterfaceOverrideInterval Unsigned32, pimInterfaceEffectPropagDelay Unsigned32, pimInterfaceEffectOverrideIvl Unsigned32, pimInterfaceSuppressionEnabled TruthValue, pimInterfaceBidirCapable TruthValue, pimInterfaceDomainBorder TruthValue, pimInterfaceStubInterface TruthValue, pimInterfacePruneLimitInterval Unsigned32, pimInterfaceGraftRetryInterval Unsigned32, pimInterfaceSRPriorityEnabled TruthValue, pimInterfaceStatus RowStatus, pimInterfaceStorageType StorageType } pimInterfaceIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of this PIM interface." ::= { pimInterfaceEntry 1 } pimInterfaceIPVersion OBJECT-TYPE SYNTAX InetVersion MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP version of this PIM interface. A physical interface may be configured in multiple modes concurrently, e.g., IPv4 and IPv6; however, the traffic is considered to be logically separate." ::= { pimInterfaceEntry 2 } pimInterfaceAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of this PIM interface." ::= { pimInterfaceEntry 3 } pimInterfaceAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The primary IP address of this router on this PIM interface. The InetAddressType is given by the pimInterfaceAddressType object." REFERENCE "RFC 4601 sections 4.1.6, 4.3.1-4.3.4, and 4.5.1" ::= { pimInterfaceEntry 4 } pimInterfaceGenerationIDValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the Generation ID this router inserted in the last PIM Hello message it sent on this interface." REFERENCE "RFC 4601 section 4.3.1" ::= { pimInterfaceEntry 5 } pimInterfaceDR OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The primary IP address of the Designated Router on this PIM interface. The InetAddressType is given by the pimInterfaceAddressType object." REFERENCE "RFC 4601 section 4.3" ::= { pimInterfaceEntry 6 } pimInterfaceDRPriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The Designated Router Priority value inserted into the DR Priority option in PIM Hello messages transmitted on this interface. Numerically higher values for this object indicate higher priorities." REFERENCE "RFC 4601 section 4.3.2" DEFVAL { 1 } ::= { pimInterfaceEntry 7 } pimInterfaceDRPriorityEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if all routers on this interface are using the DR Priority option." REFERENCE "RFC 4601 section 4.3.2" ::= { pimInterfaceEntry 8 } pimInterfaceHelloInterval OBJECT-TYPE SYNTAX Unsigned32 (0..18000) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The frequency at which PIM Hello messages are transmitted on this interface. This object corresponds to the 'Hello_Period' timer value defined in the PIM-SM specification. A value of zero represents an 'infinite' interval, and indicates that periodic PIM Hello messages should not be sent on this interface." REFERENCE "RFC 4601 section 9" DEFVAL { 30 } ::= { pimInterfaceEntry 9 } pimInterfaceTrigHelloInterval OBJECT-TYPE SYNTAX Unsigned32 (0..60) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum time before this router sends a triggered PIM Hello message on this interface. This object corresponds to the 'Trigered_Hello_Delay' timer value defined in the PIM-SM specification. A value of zero has no special meaning and indicates that triggered PIM Hello messages should always be sent immediately." REFERENCE "RFC 4601 section 4.11" DEFVAL { 5 } ::= { pimInterfaceEntry 10 } pimInterfaceHelloHoldtime OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value set in the Holdtime field of PIM Hello messages transmitted on this interface. A value of 65535 represents an 'infinite' holdtime. Implementations are recommended to use a holdtime that is 3.5 times the value of pimInterfaceHelloInterval, or 65535 if pimInterfaceHelloInterval is set to zero." REFERENCE "RFC 4601 sections 4.3.2 and 4.9.2" DEFVAL { 105 } ::= { pimInterfaceEntry 11 } pimInterfaceJoinPruneInterval OBJECT-TYPE SYNTAX Unsigned32 (0..18000) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The frequency at which this router sends PIM Join/Prune messages on this PIM interface. This object corresponds to the 't_periodic' timer value defined in the PIM-SM specification. A value of zero represents an 'infinite' interval, and indicates that periodic PIM Join/Prune messages should not be sent on this interface." REFERENCE "RFC 4601 section 4.11" DEFVAL { 60 } ::= { pimInterfaceEntry 12 } pimInterfaceJoinPruneHoldtime OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value inserted into the Holdtime field of a PIM Join/Prune message sent on this interface. A value of 65535 represents an 'infinite' holdtime. Implementations are recommended to use a holdtime that is 3.5 times the value of pimInterfaceJoinPruneInterval, or 65535 if pimInterfaceJoinPruneInterval is set to zero. PIM-DM implementations are recommended to use the value of pimInterfacePruneLimitInterval." REFERENCE "RFC 4601 sections 4.5.3 and 4.9.5" DEFVAL { 210 } ::= { pimInterfaceEntry 13 } pimInterfaceDFElectionRobustness OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum number of PIM DF-Election messages that must be lost in order for DF election on this interface to fail." DEFVAL { 3 } ::= { pimInterfaceEntry 14 } pimInterfaceLanDelayEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if all routers on this interface are using the LAN Prune Delay option." REFERENCE "RFC 4601 sections 4.3.3 and 4.9.2" ::= { pimInterfaceEntry 15 } pimInterfacePropagationDelay OBJECT-TYPE SYNTAX Unsigned32 (0..32767) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The expected propagation delay between PIM routers on this network or link. This router inserts this value into the Propagation_Delay field of the LAN Prune Delay option in the PIM Hello messages sent on this interface. Implementations SHOULD enforce a lower bound on the permitted values for this object to allow for scheduling and processing delays within the local router." DEFVAL { 500 } ::= { pimInterfaceEntry 16 } pimInterfaceOverrideInterval OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value this router inserts into the Override_Interval field of the LAN Prune Delay option in the PIM Hello messages it sends on this interface. When overriding a prune, PIM routers pick a random timer duration up to the value of this object. The more PIM routers that are active on a network, the more likely it is that the prune will be overridden after a small proportion of this time has elapsed. The more PIM routers are active on this network, the larger this object should be to obtain an optimal spread of prune override latencies." REFERENCE "RFC 4601 section 4.3.3" DEFVAL { 2500 } ::= { pimInterfaceEntry 17 } pimInterfaceEffectPropagDelay OBJECT-TYPE SYNTAX Unsigned32 (0..32767) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The Effective Propagation Delay on this interface. This object is always 500 if pimInterfaceLanDelayEnabled is FALSE." REFERENCE "RFC 4601 section 4.3.3" ::= { pimInterfaceEntry 18 } pimInterfaceEffectOverrideIvl OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The Effective Override Interval on this interface. This object is always 2500 if pimInterfaceLanDelayEnabled is FALSE." REFERENCE "RFC 4601 section 4.3.3" ::= { pimInterfaceEntry 19 } pimInterfaceSuppressionEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether join suppression is enabled on this interface. This object is always TRUE if pimInterfaceLanDelayEnabled is FALSE." REFERENCE "RFC 4601 section 4.3.3" ::= { pimInterfaceEntry 20 } pimInterfaceBidirCapable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if all routers on this interface are using the Bidirectional-PIM Capable option." REFERENCE "RFC 5015 section 3.2 and 3.7.4" ::= { pimInterfaceEntry 21 } pimInterfaceDomainBorder OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Whether or not this interface is a PIM domain border. This includes acting as a border for PIM Bootstrap Router (BSR) messages, if the BSR mechanism is in use." DEFVAL { false } ::= { pimInterfaceEntry 22 } pimInterfaceStubInterface OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Whether this interface is a 'stub interface'. If this object is set to TRUE, then no PIM packets are sent out this interface, and any received PIM packets are ignored. Setting this object to TRUE is a security measure for interfaces towards untrusted hosts. This allows an interface to be configured for use with IGMP (Internet Group Management Protocol) or MLD (Multicast Listener Discovery) only, which protects the PIM router from forged PIM messages on the interface. To communicate with other PIM routers using this interface, this object must remain set to FALSE. Changing the value of this object while the interface is operational causes PIM to be disabled and then re-enabled on this interface." REFERENCE "RFC 3376, RFC 3810" DEFVAL { false } ::= { pimInterfaceEntry 23 } pimInterfacePruneLimitInterval OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum interval that must transpire between two successive Prunes sent by a router. This object corresponds to the 't_limit' timer value defined in the PIM-DM specification. This object is used only by PIM-DM." REFERENCE "RFC 3973 section 4.8" DEFVAL { 60 } ::= { pimInterfaceEntry 24 } pimInterfaceGraftRetryInterval OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum interval that must transpire between two successive Grafts sent by a router. This object corresponds to the 'Graft_Retry_Period' timer value defined in the PIM-DM specification. This object is used only by PIM-DM." REFERENCE "RFC 3973 section 4.8" DEFVAL { 3 } ::= { pimInterfaceEntry 25 } pimInterfaceSRPriorityEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if all routers on this interface are using the State Refresh option. This object is used only by PIM-DM." ::= { pimInterfaceEntry 26 } pimInterfaceStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this entry. Creating the entry enables PIM on the interface; destroying the entry disables PIM on the interface. This status object can be set to active(1) without setting any other columnar objects in this entry. All writable objects in this entry can be modified when the status of this entry is active(1)." ::= { pimInterfaceEntry 27 } pimInterfaceStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this row. Rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { pimInterfaceEntry 28 } -- -- The PIM Neighbor Table -- pimNeighborTable OBJECT-TYPE SYNTAX SEQUENCE OF PimNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the router's PIM neighbors." ::= { pim 2 } pimNeighborEntry OBJECT-TYPE SYNTAX PimNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimNeighborTable." INDEX { pimNeighborIfIndex, pimNeighborAddressType, pimNeighborAddress } ::= { pimNeighborTable 1 } PimNeighborEntry ::= SEQUENCE { pimNeighborIfIndex InterfaceIndex, pimNeighborAddressType InetAddressType, pimNeighborAddress InetAddress, pimNeighborGenerationIDPresent TruthValue, pimNeighborGenerationIDValue Unsigned32, pimNeighborUpTime TimeTicks, pimNeighborExpiryTime TimeTicks, pimNeighborDRPriorityPresent TruthValue, pimNeighborDRPriority Unsigned32, pimNeighborLanPruneDelayPresent TruthValue, pimNeighborTBit TruthValue, pimNeighborPropagationDelay Unsigned32, pimNeighborOverrideInterval Unsigned32, pimNeighborBidirCapable TruthValue, pimNeighborSRCapable TruthValue } pimNeighborIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of ifIndex for the interface used to reach this PIM neighbor." ::= { pimNeighborEntry 1 } pimNeighborAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of this PIM neighbor." ::= { pimNeighborEntry 2 } pimNeighborAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The primary IP address of this PIM neighbor. The InetAddressType is given by the pimNeighborAddressType object." ::= { pimNeighborEntry 3 } pimNeighborGenerationIDPresent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if this neighbor is using the Generation ID option." REFERENCE "RFC 4601 section 4.3.1" ::= { pimNeighborEntry 4 } pimNeighborGenerationIDValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the Generation ID from the last PIM Hello message received from this neighbor. This object is always zero if pimNeighborGenerationIDPresent is FALSE." REFERENCE "RFC 4601 section 4.3.1" ::= { pimNeighborEntry 5 } pimNeighborUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this PIM neighbor (last) became a neighbor of the local router." ::= { pimNeighborEntry 6 } pimNeighborExpiryTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum time remaining before this PIM neighbor will time out. The value zero indicates that this PIM neighbor will never time out." ::= { pimNeighborEntry 7 } pimNeighborDRPriorityPresent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if this neighbor is using the DR Priority option." REFERENCE "RFC 4601 section 4.3.2" ::= { pimNeighborEntry 8 } pimNeighborDRPriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the Designated Router Priority from the last PIM Hello message received from this neighbor. This object is always zero if pimNeighborDRPriorityPresent is FALSE." REFERENCE "RFC 4601 section 4.3.2" ::= { pimNeighborEntry 9 } pimNeighborLanPruneDelayPresent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if this neighbor is using the LAN Prune Delay option." REFERENCE "RFC 4601 section 4.3.3" ::= { pimNeighborEntry 10 } pimNeighborTBit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the T bit was set in the LAN Prune Delay option received from this neighbor. The T bit specifies the ability of the neighbor to disable join suppression. This object is always TRUE if pimNeighborLanPruneDelayPresent is FALSE." REFERENCE "RFC 4601 section 4.3.3" ::= { pimNeighborEntry 11 } pimNeighborPropagationDelay OBJECT-TYPE SYNTAX Unsigned32 (0..32767) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the Propagation_Delay field of the LAN Prune Delay option received from this neighbor. This object is always zero if pimNeighborLanPruneDelayPresent is FALSE." REFERENCE "RFC 4601 section 4.3.3" ::= { pimNeighborEntry 12 } pimNeighborOverrideInterval OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the Override_Interval field of the LAN Prune Delay option received from this neighbor. This object is always zero if pimNeighborLanPruneDelayPresent is FALSE." REFERENCE "RFC 4601 section 4.3.3" ::= { pimNeighborEntry 13 } pimNeighborBidirCapable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if this neighbor is using the Bidirectional-PIM Capable option." REFERENCE "RFC 5015 section 3.2 and 3.7.4" ::= { pimNeighborEntry 14 } pimNeighborSRCapable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Evaluates to TRUE if this neighbor is using the State Refresh Capable option. This object is used only by PIM-DM." REFERENCE "RFC 3973 section 4.3.4" ::= { pimNeighborEntry 15 } -- -- The PIM Neighbor Secondary Address Table -- pimNbrSecAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF PimNbrSecAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the secondary addresses advertised by each PIM neighbor (on a subset of the rows of the pimNeighborTable defined above)." REFERENCE "RFC 4601 section 4.3.4" ::= { pim 3 } pimNbrSecAddressEntry OBJECT-TYPE SYNTAX PimNbrSecAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimNbrSecAddressTable." INDEX { pimNbrSecAddressIfIndex, pimNbrSecAddressType, pimNbrSecAddressPrimary, pimNbrSecAddress } ::= { pimNbrSecAddressTable 1 } PimNbrSecAddressEntry ::= SEQUENCE { pimNbrSecAddressIfIndex InterfaceIndex, pimNbrSecAddressType InetAddressType, pimNbrSecAddressPrimary InetAddress, pimNbrSecAddress InetAddress } pimNbrSecAddressIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of ifIndex for the interface used to reach this PIM neighbor." ::= { pimNbrSecAddressEntry 1 } pimNbrSecAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of this PIM neighbor." ::= { pimNbrSecAddressEntry 2 } pimNbrSecAddressPrimary OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The primary IP address of this PIM neighbor. The InetAddressType is given by the pimNbrSecAddressType object." ::= { pimNbrSecAddressEntry 3 } pimNbrSecAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The secondary IP address of this PIM neighbor. The InetAddressType is given by the pimNbrSecAddressType object." ::= { pimNbrSecAddressEntry 4 } -- -- The PIM (*,G) State Table -- pimStarGTable OBJECT-TYPE SYNTAX SEQUENCE OF PimStarGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the non-interface specific (*,G) state that PIM has." REFERENCE "RFC 4601 section 4.1.3" ::= { pim 4 } pimStarGEntry OBJECT-TYPE SYNTAX PimStarGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimStarGTable." INDEX { pimStarGAddressType, pimStarGGrpAddress } ::= { pimStarGTable 1 } PimStarGEntry ::= SEQUENCE { pimStarGAddressType InetAddressType, pimStarGGrpAddress InetAddress, pimStarGUpTime TimeTicks, pimStarGPimMode PimMode, pimStarGRPAddressType InetAddressType, pimStarGRPAddress InetAddress, pimStarGPimModeOrigin PimGroupMappingOriginType, pimStarGRPIsLocal TruthValue, pimStarGUpstreamJoinState INTEGER, pimStarGUpstreamJoinTimer TimeTicks, pimStarGUpstreamNeighborType InetAddressType, pimStarGUpstreamNeighbor InetAddress, pimStarGRPFIfIndex InterfaceIndexOrZero, pimStarGRPFNextHopType InetAddressType, pimStarGRPFNextHop InetAddress, pimStarGRPFRouteProtocol IANAipRouteProtocol, pimStarGRPFRouteAddress InetAddress, pimStarGRPFRoutePrefixLength InetAddressPrefixLength, pimStarGRPFRouteMetricPref Unsigned32, pimStarGRPFRouteMetric Unsigned32 } pimStarGAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of this multicast group." ::= { pimStarGEntry 1 } pimStarGGrpAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The multicast group address. The InetAddressType is given by the pimStarGAddressType object." ::= { pimStarGEntry 2 } pimStarGUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this entry was created by the local router." ::= { pimStarGEntry 3 } pimStarGPimMode OBJECT-TYPE SYNTAX PimMode { asm(3), bidir(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether this entry represents an ASM (Any Source Multicast, used with PIM-SM) or BIDIR-PIM group." ::= { pimStarGEntry 4 } pimStarGRPAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of the Rendezvous Point (RP), or unknown(0) if the RP address is unknown." ::= { pimStarGEntry 5 } pimStarGRPAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the Rendezvous Point (RP) for the group. The InetAddressType is given by the pimStarGRPAddressType." ::= { pimStarGEntry 6 } pimStarGPimModeOrigin OBJECT-TYPE SYNTAX PimGroupMappingOriginType MAX-ACCESS read-only STATUS current DESCRIPTION "The mechanism by which the PIM mode and RP for the group were learned." ::= { pimStarGEntry 7 } pimStarGRPIsLocal OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the local router is the RP for the group." ::= { pimStarGEntry 8 } pimStarGUpstreamJoinState OBJECT-TYPE SYNTAX INTEGER { notJoined (1), joined (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the local router should join the RP tree for the group. This corresponds to the state of the upstream (*,G) state machine in the PIM-SM specification." REFERENCE "RFC 4601 section 4.5.6" ::= { pimStarGEntry 9 } pimStarGUpstreamJoinTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before the local router next sends a periodic (*,G) Join message on pimStarGRPFIfIndex. This timer is called the (*,G) Upstream Join Timer in the PIM-SM specification. This object is zero if the timer is not running." REFERENCE "RFC 4601 section 4.10" ::= { pimStarGEntry 10 } pimStarGUpstreamNeighborType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The primary address type of the upstream neighbor, or unknown(0) if the upstream neighbor address is unknown or is not a PIM neighbor." ::= { pimStarGEntry 11 } pimStarGUpstreamNeighbor OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The primary address of the neighbor on pimStarGRPFIfIndex that the local router is sending periodic (*,G) Join messages to. The InetAddressType is given by the pimStarGUpstreamNeighborType object. This address is called RPF'(*,G) in the PIM-SM specification." REFERENCE "RFC 4601 section 4.1.6" ::= { pimStarGEntry 12 } pimStarGRPFIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ifIndex for the Reverse Path Forwarding (RPF) interface towards the RP, or zero if the RPF interface is unknown." ::= { pimStarGEntry 13 } pimStarGRPFNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of the RPF next hop towards the RP, or unknown(0) if the RPF next hop is unknown." ::= { pimStarGEntry 14 } pimStarGRPFNextHop OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the RPF next hop towards the RP. The InetAddressType is given by the pimStarGRPFNextHopType object. This address is called MRIB.next_hop(RP(G)) in the PIM-SM specification." REFERENCE "RFC 4601 section 4.5.5" ::= { pimStarGEntry 15 } pimStarGRPFRouteProtocol OBJECT-TYPE SYNTAX IANAipRouteProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The routing mechanism via which the route used to find the RPF interface towards the RP was learned." ::= { pimStarGEntry 16 } pimStarGRPFRouteAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address that, when combined with the corresponding value of pimStarGRPFRoutePrefixLength, identifies the route used to find the RPF interface towards the RP. The InetAddressType is given by the pimStarGRPFNextHopType object. This address object is only significant up to pimStarGRPFRoutePrefixLength bits. The remainder of the address bits are zero." ::= { pimStarGEntry 17 } pimStarGRPFRoutePrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "The prefix length that, when combined with the corresponding value of pimStarGRPFRouteAddress, identifies the route used to find the RPF interface towards the RP. The InetAddressType is given by the pimStarGRPFNextHopType object." ::= { pimStarGEntry 18 } pimStarGRPFRouteMetricPref OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The metric preference of the route used to find the RPF interface towards the RP." ::= { pimStarGEntry 19 } pimStarGRPFRouteMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The routing metric of the route used to find the RPF interface towards the RP." ::= { pimStarGEntry 20 } -- -- The PIM (*,G,I) State Table -- pimStarGITable OBJECT-TYPE SYNTAX SEQUENCE OF PimStarGIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the interface-specific (*,G) state that PIM has." REFERENCE "RFC 4601 section 4.1.3" ::= { pim 5 } pimStarGIEntry OBJECT-TYPE SYNTAX PimStarGIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimStarGITable." INDEX { pimStarGAddressType, pimStarGGrpAddress, pimStarGIIfIndex } ::= { pimStarGITable 1 } PimStarGIEntry ::= SEQUENCE { pimStarGIIfIndex InterfaceIndex, pimStarGIUpTime TimeTicks, pimStarGILocalMembership TruthValue, pimStarGIJoinPruneState INTEGER, pimStarGIPrunePendingTimer TimeTicks, pimStarGIJoinExpiryTimer TimeTicks, pimStarGIAssertState INTEGER, pimStarGIAssertTimer TimeTicks, pimStarGIAssertWinnerAddressType InetAddressType, pimStarGIAssertWinnerAddress InetAddress, pimStarGIAssertWinnerMetricPref Unsigned32, pimStarGIAssertWinnerMetric Unsigned32 } pimStarGIIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the interface that this entry corresponds to." ::= { pimStarGIEntry 1 } pimStarGIUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this entry was created by the local router." ::= { pimStarGIEntry 2 } pimStarGILocalMembership OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the local router has (*,G) local membership on this interface (resulting from a mechanism such as IGMP or MLD). This corresponds to local_receiver_include(*,G,I) in the PIM-SM specification." REFERENCE "RFC 3376, RFC 3810, and RFC 4601 section 4.1.6" ::= { pimStarGIEntry 3 } pimStarGIJoinPruneState OBJECT-TYPE SYNTAX INTEGER { noInfo (1), join (2), prunePending (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state resulting from (*,G) Join/Prune messages received on this interface. This corresponds to the state of the downstream per-interface (*,G) state machine in the PIM-SM specification." REFERENCE "RFC 4601 section 4.5.2" ::= { pimStarGIEntry 4 } pimStarGIPrunePendingTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before the local router acts on a (*,G) Prune message received on this interface, during which the router is waiting to see whether another downstream router will override the Prune message. This timer is called the (*,G) Prune-Pending Timer in the PIM-SM specification. This object is zero if the timer is not running." REFERENCE "RFC 4601 section 4.5.1" ::= { pimStarGIEntry 5 } pimStarGIJoinExpiryTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before (*,G) Join state for this interface expires. This timer is called the (*,G) Join Expiry Timer in the PIM-SM specification. This object is zero if the timer is not running. A value of 'FFFFFFFF'h indicates an infinite expiry time." REFERENCE "RFC 4601 section 4.10" ::= { pimStarGIEntry 6 } pimStarGIAssertState OBJECT-TYPE SYNTAX INTEGER { noInfo (1), iAmAssertWinner (2), iAmAssertLoser (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The (*,G) Assert state for this interface. This corresponds to the state of the per-interface (*,G) Assert state machine in the PIM-SM specification. If pimStarGPimMode is 'bidir', this object must be 'noInfo'." REFERENCE "RFC 4601 section 4.6.2" ::= { pimStarGIEntry 7 } pimStarGIAssertTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "If pimStarGIAssertState is 'iAmAssertWinner', this is the time remaining before the local router next sends a (*,G) Assert message on this interface. If pimStarGIAssertState is 'iAmAssertLoser', this is the time remaining before the (*,G) Assert state expires. If pimStarGIAssertState is 'noInfo', this is zero. This timer is called the (*,G) Assert Timer in the PIM-SM specification." REFERENCE "RFC 4601 section 4.6.2" ::= { pimStarGIEntry 8 } pimStarGIAssertWinnerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "If pimStarGIAssertState is 'iAmAssertLoser', this is the address type of the assert winner; otherwise, this object is unknown(0)." ::= { pimStarGIEntry 9 } pimStarGIAssertWinnerAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "If pimStarGIAssertState is 'iAmAssertLoser', this is the address of the assert winner. The InetAddressType is given by the pimStarGIAssertWinnerAddressType object." ::= { pimStarGIEntry 10 } pimStarGIAssertWinnerMetricPref OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "If pimStarGIAssertState is 'iAmAssertLoser', this is the metric preference of the route to the RP advertised by the assert winner; otherwise, this object is zero." ::= { pimStarGIEntry 11 } pimStarGIAssertWinnerMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "If pimStarGIAssertState is 'iAmAssertLoser', this is the routing metric of the route to the RP advertised by the assert winner; otherwise, this object is zero." ::= { pimStarGIEntry 12 } -- -- The PIM (S,G) State Table -- pimSGTable OBJECT-TYPE SYNTAX SEQUENCE OF PimSGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the non-interface specific (S,G) state that PIM has." REFERENCE "RFC 4601 section 4.1.4" ::= { pim 6 } pimSGEntry OBJECT-TYPE SYNTAX PimSGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimSGTable." INDEX { pimSGAddressType, pimSGGrpAddress, pimSGSrcAddress } ::= { pimSGTable 1 } PimSGEntry ::= SEQUENCE { pimSGAddressType InetAddressType, pimSGGrpAddress InetAddress, pimSGSrcAddress InetAddress, pimSGUpTime TimeTicks, pimSGPimMode PimMode, pimSGUpstreamJoinState INTEGER, pimSGUpstreamJoinTimer TimeTicks, pimSGUpstreamNeighbor InetAddress, pimSGRPFIfIndex InterfaceIndexOrZero, pimSGRPFNextHopType InetAddressType, pimSGRPFNextHop InetAddress, pimSGRPFRouteProtocol IANAipRouteProtocol, pimSGRPFRouteAddress InetAddress, pimSGRPFRoutePrefixLength InetAddressPrefixLength, pimSGRPFRouteMetricPref Unsigned32, pimSGRPFRouteMetric Unsigned32, pimSGSPTBit TruthValue, pimSGKeepaliveTimer TimeTicks, pimSGDRRegisterState INTEGER, pimSGDRRegisterStopTimer TimeTicks, pimSGRPRegisterPMBRAddressType InetAddressType, pimSGRPRegisterPMBRAddress InetAddress, pimSGUpstreamPruneState INTEGER, pimSGUpstreamPruneLimitTimer TimeTicks, pimSGOriginatorState INTEGER, pimSGSourceActiveTimer TimeTicks, pimSGStateRefreshTimer TimeTicks } pimSGAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of the source and multicast group for this entry." ::= { pimSGEntry 1 } pimSGGrpAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The multicast group address for this entry. The InetAddressType is given by the pimSGAddressType object." ::= { pimSGEntry 2 } pimSGSrcAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The source address for this entry. The InetAddressType is given by the pimSGAddressType object." ::= { pimSGEntry 3 } pimSGUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this entry was created by the local router." ::= { pimSGEntry 4 } pimSGPimMode OBJECT-TYPE SYNTAX PimMode { ssm(2), asm(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether pimSGGrpAddress is an SSM (Source Specific Multicast, used with PIM-SM) or ASM (Any Source Multicast, used with PIM-SM) group." REFERENCE "RFC 4601 section 4.5.2, RFC 3569, and 'IP Multicast MIB' (August 2007) ipMcastSsmRangeTable" ::= { pimSGEntry 5 } pimSGUpstreamJoinState OBJECT-TYPE SYNTAX INTEGER { notJoined (1), joined (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the local router should join the shortest-path tree for the source and group represented by this entry. This corresponds to the state of the upstream (S,G) state machine in the PIM-SM specification." REFERENCE "RFC 4601 section 4.5.7" ::= { pimSGEntry 6 } pimSGUpstreamJoinTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before the local router next sends a periodic (S,G) Join message on pimSGRPFIfIndex. This timer is called the (S,G) Upstream Join Timer in the PIM-SM specification. This object is zero if the timer is not running." REFERENCE "RFC 4601 sections 4.10 and 4.11" ::= { pimSGEntry 7 } pimSGUpstreamNeighbor OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The primary address of the neighbor on pimSGRPFIfIndex that the local router is sending periodic (S,G) Join messages to. This is zero if the RPF next hop is unknown or is not a PIM neighbor. The InetAddressType is given by the pimSGAddressType object. This address is called RPF'(S,G) in the PIM-SM specification." REFERENCE "RFC 4601 section 4.1.6" ::= { pimSGEntry 8 } pimSGRPFIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ifIndex for the RPF interface towards the source, or zero if the RPF interface is unknown." ::= { pimSGEntry 9 } pimSGRPFNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of the RPF next hop towards the source, or unknown(0) if the RPF next hop is unknown." ::= { pimSGEntry 10 } pimSGRPFNextHop OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the RPF next hop towards the source. The InetAddressType is given by the pimSGRPFNextHopType. This address is called MRIB.next_hop(S) in the PIM-SM specification." REFERENCE "RFC 4601 section 4.5.5" ::= { pimSGEntry 11 } pimSGRPFRouteProtocol OBJECT-TYPE SYNTAX IANAipRouteProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The routing mechanism via which the route used to find the RPF interface towards the source was learned." ::= { pimSGEntry 12 } pimSGRPFRouteAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address that, when combined with the corresponding value of pimSGRPFRoutePrefixLength, identifies the route used to find the RPF interface towards the source. The InetAddressType is given by the pimSGRPFNextHopType object. This address object is only significant up to pimSGRPFRoutePrefixLength bits. The remainder of the address bits are zero." ::= { pimSGEntry 13 } pimSGRPFRoutePrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "The prefix length that, when combined with the corresponding value of pimSGRPFRouteAddress, identifies the route used to find the RPF interface towards the source. The InetAddressType is given by the pimSGRPFNextHopType object." ::= { pimSGEntry 14 } pimSGRPFRouteMetricPref OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The metric preference of the route used to find the RPF interface towards the source." ::= { pimSGEntry 15 } pimSGRPFRouteMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The routing metric of the route used to find the RPF interface towards the source." ::= { pimSGEntry 16 } pimSGSPTBit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the SPT bit is set; and therefore whether forwarding is taking place on the shortest-path tree." ::= { pimSGEntry 17 } pimSGKeepaliveTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before this (S,G) state expires, in the absence of explicit (S,G) local membership or (S,G) Join messages received to maintain it. This timer is called the (S,G) Keepalive Timer in the PIM-SM specification." REFERENCE "RFC 4601 section 4.1.4" ::= { pimSGEntry 18 } pimSGDRRegisterState OBJECT-TYPE SYNTAX INTEGER { noInfo (1), join (2), joinPending (3), prune (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the local router should encapsulate (S,G) data packets in Register messages and send them to the RP. This corresponds to the state of the per-(S,G) Register state machine in the PIM-SM specification. This object is always 'noInfo' unless pimSGPimMode is 'asm'." REFERENCE "RFC 4601 section 4.4.1" ::= { pimSGEntry 19 } pimSGDRRegisterStopTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "If pimSGDRRegisterState is 'prune', this is the time remaining before the local router sends a Null-Register message to the RP. If pimSGDRRegisterState is 'joinPending', this is the time remaining before the local router resumes encapsulating data packets and sending them to the RP. Otherwise, this is zero. This timer is called the Register-Stop Timer in the PIM-SM specification." REFERENCE "RFC 4601 section 4.4" ::= { pimSGEntry 20 } pimSGRPRegisterPMBRAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of the first PIM Multicast Border Router to send a Register message with the Border bit set. This object is unknown(0) if the local router is not the RP for the group." ::= { pimSGEntry 21 } pimSGRPRegisterPMBRAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the first PIM Multicast Border Router to send a Register message with the Border bit set. The InetAddressType is given by the pimSGRPRegisterPMBRAddressType object." ::= { pimSGEntry 22 } pimSGUpstreamPruneState OBJECT-TYPE SYNTAX INTEGER { forwarding (1), ackpending (2), pruned (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the local router has pruned itself from the tree. This corresponds to the state of the upstream prune (S,G) state machine in the PIM-DM specification. This object is used only by PIM-DM." REFERENCE "RFC 3973 section 4.4.1" ::= { pimSGEntry 23 } pimSGUpstreamPruneLimitTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before the local router may send a (S,G) Prune message on pimSGRPFIfIndex. This timer is called the (S,G) Prune Limit Timer in the PIM-DM specification. This object is zero if the timer is not running. This object is used only by PIM-DM." REFERENCE "RFC 2973 section 4.8" ::= { pimSGEntry 24 } pimSGOriginatorState OBJECT-TYPE SYNTAX INTEGER { notOriginator (1), originator (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the router is an originator for an (S,G) message flow. This corresponds to the state of the per-(S,G) Originator state machine in the PIM-DM specification. This object is used only by PIM-DM." REFERENCE "RFC 3973 section 4.5.2" ::= { pimSGEntry 25 } pimSGSourceActiveTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "If pimSGOriginatorState is 'originator', this is the time remaining before the local router reverts to a notOriginator state. Otherwise, this is zero. This timer is called the Source Active Timer in the PIM-DM specification. This object is used only by PIM-DM." REFERENCE "RFC 3973 section 4.8" ::= { pimSGEntry 26 } pimSGStateRefreshTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "If pimSGOriginatorState is 'originator', this is the time remaining before the local router sends a State Refresh message. Otherwise, this is zero. This timer is called the State Refresh Timer in the PIM-DM specification. This object is used only by PIM-DM." REFERENCE "RFC 3973 section 4.8" ::= { pimSGEntry 27 } -- -- The PIM (S,G,I) State Table -- pimSGITable OBJECT-TYPE SYNTAX SEQUENCE OF PimSGIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the interface-specific (S,G) state that PIM has." REFERENCE "RFC 4601 section 4.1.4" ::= { pim 7 } pimSGIEntry OBJECT-TYPE SYNTAX PimSGIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimSGITable." INDEX { pimSGAddressType, pimSGGrpAddress, pimSGSrcAddress, pimSGIIfIndex } ::= { pimSGITable 1 } PimSGIEntry ::= SEQUENCE { pimSGIIfIndex InterfaceIndex, pimSGIUpTime TimeTicks, pimSGILocalMembership TruthValue, pimSGIJoinPruneState INTEGER, pimSGIPrunePendingTimer TimeTicks, pimSGIJoinExpiryTimer TimeTicks, pimSGIAssertState INTEGER, pimSGIAssertTimer TimeTicks, pimSGIAssertWinnerAddressType InetAddressType, pimSGIAssertWinnerAddress InetAddress, pimSGIAssertWinnerMetricPref Unsigned32, pimSGIAssertWinnerMetric Unsigned32 } pimSGIIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the interface that this entry corresponds to." ::= { pimSGIEntry 1 } pimSGIUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this entry was created by the local router." ::= { pimSGIEntry 2 } pimSGILocalMembership OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the local router has (S,G) local membership on this interface (resulting from a mechanism such as IGMP or MLD). This corresponds to local_receiver_include(S,G,I) in the PIM-SM specification." REFERENCE "RFC 3376, RFC 3810, RFC 4601 sections 4.1.6, 4.6.1, and 4.6.2" ::= { pimSGIEntry 3 } pimSGIJoinPruneState OBJECT-TYPE SYNTAX INTEGER { noInfo (1), join (2), prunePending (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state resulting from (S,G) Join/Prune messages received on this interface. This corresponds to the state of the downstream per-interface (S,G) state machine in the PIM-SM and PIM-DM specification." REFERENCE "RFC 4601 section 4.5.3 and RFC 3973 section 4.4.2" ::= { pimSGIEntry 4 } pimSGIPrunePendingTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before the local router acts on an (S,G) Prune message received on this interface, during which the router is waiting to see whether another downstream router will override the Prune message. This timer is called the (S,G) Prune-Pending Timer in the PIM-SM specification. This object is zero if the timer is not running." REFERENCE "RFC 4601 sections 4.5.3 and 4.5.4" ::= { pimSGIEntry 5 } pimSGIJoinExpiryTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before (S,G) Join state for this interface expires. This timer is called the (S,G) Join Expiry Timer in the PIM-SM specification. This object is zero if the timer is not running. A value of 'FFFFFFFF'h indicates an infinite expiry time. This timer is called the (S,G) Prune Timer in the PIM-DM specification." REFERENCE "RFC 4601 section 4.10 and RFC 3973 section 4.8" ::= { pimSGIEntry 6 } pimSGIAssertState OBJECT-TYPE SYNTAX INTEGER { noInfo (1), iAmAssertWinner (2), iAmAssertLoser (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The (S,G) Assert state for this interface. This corresponds to the state of the per-interface (S,G) Assert state machine in the PIM-SM specification." REFERENCE "RFC 4601 section 4.6.1" ::= { pimSGIEntry 7 } pimSGIAssertTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "If pimSGIAssertState is 'iAmAssertWinner', this is the time remaining before the local router next sends a (S,G) Assert message on this interface. If pimSGIAssertState is 'iAmAssertLoser', this is the time remaining before the (S,G) Assert state expires. If pimSGIAssertState is 'noInfo', this is zero. This timer is called the (S,G) Assert Timer in the PIM-SM specification." REFERENCE "RFC 4601 section 4.6.1" ::= { pimSGIEntry 8 } pimSGIAssertWinnerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "If pimSGIAssertState is 'iAmAssertLoser', this is the address type of the assert winner; otherwise, this object is unknown(0)." ::= { pimSGIEntry 9 } pimSGIAssertWinnerAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "If pimSGIAssertState is 'iAmAssertLoser', this is the address of the assert winner. The InetAddressType is given by the pimSGIAssertWinnerAddressType object." ::= { pimSGIEntry 10 } pimSGIAssertWinnerMetricPref OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "If pimSGIAssertState is 'iAmAssertLoser', this is the metric preference of the route to the source advertised by the assert winner; otherwise, this object is zero." ::= { pimSGIEntry 11 } pimSGIAssertWinnerMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "If pimSGIAssertState is 'iAmAssertLoser', this is the routing metric of the route to the source advertised by the assert winner; otherwise, this object is zero." ::= { pimSGIEntry 12 } -- -- The PIM (S,G,rpt) State Table -- pimSGRptTable OBJECT-TYPE SYNTAX SEQUENCE OF PimSGRptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the non-interface specific (S,G,rpt) state that PIM has." REFERENCE "RFC 4601 section 4.1.5" ::= { pim 8 } pimSGRptEntry OBJECT-TYPE SYNTAX PimSGRptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimSGRptTable." INDEX { pimStarGAddressType, pimStarGGrpAddress, pimSGRptSrcAddress } ::= { pimSGRptTable 1 } PimSGRptEntry ::= SEQUENCE { pimSGRptSrcAddress InetAddress, pimSGRptUpTime TimeTicks, pimSGRptUpstreamPruneState INTEGER, pimSGRptUpstreamOverrideTimer TimeTicks } pimSGRptSrcAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The source address for this entry. The InetAddressType is given by the pimStarGAddressType object." ::= { pimSGRptEntry 1 } pimSGRptUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this entry was created by the local router." ::= { pimSGRptEntry 2 } pimSGRptUpstreamPruneState OBJECT-TYPE SYNTAX INTEGER { rptNotJoined (1), pruned (2), notPruned (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the local router should prune the source off the RP tree. This corresponds to the state of the upstream (S,G,rpt) state machine for triggered messages in the PIM-SM specification." REFERENCE "RFC 4601 section 4.5.9" ::= { pimSGRptEntry 3 } pimSGRptUpstreamOverrideTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before the local router sends a triggered (S,G,rpt) Join message on pimStarGRPFIfIndex. This timer is called the (S,G,rpt) Upstream Override Timer in the PIM-SM specification. This object is zero if the timer is not running." REFERENCE "RFC 4601 section 4.5.9" ::= { pimSGRptEntry 4 } -- -- The PIM (S,G,rpt,I) State Table -- pimSGRptITable OBJECT-TYPE SYNTAX SEQUENCE OF PimSGRptIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the interface-specific (S,G,rpt) state that PIM has." REFERENCE "RFC 4601 section 4.1.5" ::= { pim 9 } pimSGRptIEntry OBJECT-TYPE SYNTAX PimSGRptIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimSGRptITable." INDEX { pimStarGAddressType, pimStarGGrpAddress, pimSGRptSrcAddress, pimSGRptIIfIndex } ::= { pimSGRptITable 1 } PimSGRptIEntry ::= SEQUENCE { pimSGRptIIfIndex InterfaceIndex, pimSGRptIUpTime TimeTicks, pimSGRptILocalMembership TruthValue, pimSGRptIJoinPruneState INTEGER, pimSGRptIPrunePendingTimer TimeTicks, pimSGRptIPruneExpiryTimer TimeTicks } pimSGRptIIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the interface that this entry corresponds to." ::= { pimSGRptIEntry 1 } pimSGRptIUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this entry was created by the local router." ::= { pimSGRptIEntry 2 } pimSGRptILocalMembership OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the local router has both (*,G) include local membership and (S,G) exclude local membership on this interface (resulting from a mechanism such as IGMP or MLD). This corresponds to local_receiver_exclude(S,G,I) in the PIM-SM specification." REFERENCE "RFC 3376, RFC 3810, RFC 4601 section 4.1.6" ::= { pimSGRptIEntry 3 } pimSGRptIJoinPruneState OBJECT-TYPE SYNTAX INTEGER { noInfo (1), prune (2), prunePending (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state resulting from (S,G,rpt) Join/Prune messages received on this interface. This corresponds to the state of the downstream per-interface (S,G,rpt) state machine in the PIM-SM specification." REFERENCE "RFC 4601 section 4.5.4" ::= { pimSGRptIEntry 4 } pimSGRptIPrunePendingTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before the local router starts pruning this source off the RP tree. This timer is called the (S,G,rpt) Prune-Pending Timer in the PIM-SM specification. This object is zero if the timer is not running." REFERENCE "RFC 4601 section 4.5.4" ::= { pimSGRptIEntry 5 } pimSGRptIPruneExpiryTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before (S,G,rpt) Prune state for this interface expires. This timer is called the (S,G,rpt) Prune Expiry Timer in the PIM-SM specification. This object is zero if the timer is not running. A value of 'FFFFFFFF'h indicates an infinite expiry time." REFERENCE "RFC 4601 section 4.5.4" ::= { pimSGRptIEntry 6 } -- -- The PIM Bidir DF-Election Table -- pimBidirDFElectionTable OBJECT-TYPE SYNTAX SEQUENCE OF PimBidirDFElectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the per-RP Designated Forwarder (DF) Election state for each interface for all the RPs in BIDIR mode." REFERENCE "RFC 5015 section 3.5" ::= { pim 10 } pimBidirDFElectionEntry OBJECT-TYPE SYNTAX PimBidirDFElectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimBidirDFElectionTable." INDEX { pimBidirDFElectionAddressType, pimBidirDFElectionRPAddress, pimBidirDFElectionIfIndex } ::= { pimBidirDFElectionTable 1 } PimBidirDFElectionEntry ::= SEQUENCE { pimBidirDFElectionAddressType InetAddressType, pimBidirDFElectionRPAddress InetAddress, pimBidirDFElectionIfIndex InterfaceIndex, pimBidirDFElectionWinnerAddressType InetAddressType, pimBidirDFElectionWinnerAddress InetAddress, pimBidirDFElectionWinnerUpTime TimeTicks, pimBidirDFElectionWinnerMetricPref Unsigned32, pimBidirDFElectionWinnerMetric Unsigned32, pimBidirDFElectionState INTEGER, pimBidirDFElectionStateTimer TimeTicks } pimBidirDFElectionAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of the RP for which the DF state is being maintained." ::= { pimBidirDFElectionEntry 1 } pimBidirDFElectionRPAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address of the RP for which the DF state is being maintained. The InetAddressType is given by the pimBidirDFElectionAddressType object." ::= { pimBidirDFElectionEntry 2 } pimBidirDFElectionIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of ifIndex for the interface for which the DF state is being maintained." ::= { pimBidirDFElectionEntry 3 } pimBidirDFElectionWinnerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The primary address type of the winner of the DF Election process. A value of unknown(0) indicates there is currently no DF." ::= { pimBidirDFElectionEntry 4 } pimBidirDFElectionWinnerAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The primary IP address of the winner of the DF Election process. The InetAddressType is given by the pimBidirDFElectionWinnerAddressType object." ::= { pimBidirDFElectionEntry 5 } pimBidirDFElectionWinnerUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since the current winner (last) became elected as the DF for this RP." ::= { pimBidirDFElectionEntry 6 } pimBidirDFElectionWinnerMetricPref OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The metric preference advertised by the DF Winner, or zero if there is currently no DF." ::= { pimBidirDFElectionEntry 7 } pimBidirDFElectionWinnerMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The metric advertised by the DF Winner, or zero if there is currently no DF." ::= { pimBidirDFElectionEntry 8 } pimBidirDFElectionState OBJECT-TYPE SYNTAX INTEGER { dfOffer(1), dfLose(2), dfWinner(3), dfBackoff(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of this interface with respect to DF-Election for this RP. The states correspond to the ones defined in the BIDIR-PIM specification." REFERENCE "RFC 5015 section 3.5.3.1" ::= { pimBidirDFElectionEntry 9 } pimBidirDFElectionStateTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum time remaining after which the local router will expire the current DF state represented by pimBidirDFElectionState." ::= { pimBidirDFElectionEntry 10 } -- -- The PIM Static RP Table -- pimStaticRPTable OBJECT-TYPE SYNTAX SEQUENCE OF PimStaticRPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to manage static configuration of RPs. If the group prefixes configured for two or more rows in this table overlap, the row with the greatest value of pimStaticRPGrpPrefixLength is used for the overlapping range." REFERENCE "RFC 4601 section 3.7" ::= { pim 11 } pimStaticRPEntry OBJECT-TYPE SYNTAX PimStaticRPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimStaticRPTable. This entry is preserved on agent restart." INDEX { pimStaticRPAddressType, pimStaticRPGrpAddress, pimStaticRPGrpPrefixLength } ::= { pimStaticRPTable 1 } PimStaticRPEntry ::= SEQUENCE { pimStaticRPAddressType InetAddressType, pimStaticRPGrpAddress InetAddress, pimStaticRPGrpPrefixLength InetAddressPrefixLength, pimStaticRPRPAddress InetAddress, pimStaticRPPimMode PimMode, pimStaticRPOverrideDynamic TruthValue, pimStaticRPPrecedence Unsigned32, pimStaticRPRowStatus RowStatus, pimStaticRPStorageType StorageType } pimStaticRPAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of this entry." ::= { pimStaticRPEntry 1 } pimStaticRPGrpAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The multicast group address that, when combined with pimStaticRPGrpPrefixLength, gives the group prefix for this entry. The InetAddressType is given by the pimStaticRPAddressType object. This address object is only significant up to pimStaticRPGrpPrefixLength bits. The remainder of the address bits are zero. This is especially important for this index field, which is part of the index of this entry. Any non-zero bits would signify an entirely different entry." ::= { pimStaticRPEntry 2 } pimStaticRPGrpPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength (4..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The multicast group prefix length that, when combined with pimStaticRPGrpAddress, gives the group prefix for this entry. The InetAddressType is given by the pimStaticRPAddressType object. If pimStaticRPAddressType is 'ipv4' or 'ipv4z', this object must be in the range 4..32. If pimStaticRPGrpAddressType is 'ipv6' or 'ipv6z', this object must be in the range 8..128." ::= { pimStaticRPEntry 3 } pimStaticRPRPAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address of the RP to be used for groups within this group prefix. The InetAddressType is given by the pimStaticRPAddressType object." ::= { pimStaticRPEntry 4 } pimStaticRPPimMode OBJECT-TYPE SYNTAX PimMode { ssm(2), asm(3), bidir(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The PIM mode to be used for groups in this group prefix. If this object is set to ssm(2), then pimStaticRPRPAddress must be set to zero. No RP operations are ever possible for PIM Mode SSM." REFERENCE "RFC 4601 section 3.7, RFC 3569, and 'IP Multicast MIB' (August 2007) ipMcastSsmRangeTable" DEFVAL { asm } ::= { pimStaticRPEntry 5 } pimStaticRPOverrideDynamic OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Whether this static RP configuration will override other group mappings in this group prefix. If this object is TRUE, then it will override: - RP information learned dynamically for groups in this group prefix. - RP information configured in pimStaticRPTable with pimStaticRPOverrideDynamic set to FALSE. See pimGroupMappingTable for details." DEFVAL { false } ::= { pimStaticRPEntry 6 } pimStaticRPPrecedence OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value for pimGroupMappingPrecedence to be used for this static RP configuration. This allows fine control over which configuration is overridden by this static configuration. If pimStaticRPOverrideDynamic is set to TRUE, all dynamic RP configuration is overridden by this static configuration, whatever the value of this object. The absolute values of this object have a significance only on the local router and do not need to be coordinated with other routers. A setting of this object may have different effects when applied to other routers. Do not use this object unless fine control of static RP behavior on the local router is required." ::= { pimStaticRPEntry 7 } pimStaticRPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row, by which rows in this table can be created and destroyed. This status object cannot be set to active(1) before a valid value has been written to pimStaticRPRPAddress. All writable objects in this entry can be modified when the status of this entry is active(1)." ::= { pimStaticRPEntry 8 } pimStaticRPStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this row. Rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { pimStaticRPEntry 9 } -- -- The PIM Anycast-RP Set Table -- pimAnycastRPSetTable OBJECT-TYPE SYNTAX SEQUENCE OF PimAnycastRPSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to manage Anycast-RP via PIM Register messages, as opposed to via other protocols such as MSDP (Multicast Source Discovery Protocol). Entries must be configured in this table if and only if the local router is a member of one or more Anycast-RP sets, that is, one or more Anycast-RP addresses are assigned to the local router. Note that if using static RP configuration, this is in addition to, not instead of, the pimStaticRPTable entries that must be configured for the Anycast-RPs. The set of rows with the same values of both pimAnycastRPSetAddressType and pimAnycastRPSetAnycastAddress corresponds to the Anycast-RP set for that Anycast-RP address. When an Anycast-RP set configuration is active, one entry per pimAnycastRPSetAnycastAddress corresponds to the local router. The local router is identified by the pimAnycastRpSetLocalRouter object. That entry determines the source address used by the local router when forwarding PIM Register messages within the Anycast-RP set." REFERENCE "RFC 4610, RFC 3618" ::= { pim 12 } pimAnycastRPSetEntry OBJECT-TYPE SYNTAX PimAnycastRPSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponds to a single router within a particular Anycast-RP set. This entry is preserved on agent restart." INDEX { pimAnycastRPSetAddressType, pimAnycastRPSetAnycastAddress, pimAnycastRPSetRouterAddress } ::= { pimAnycastRPSetTable 1 } PimAnycastRPSetEntry ::= SEQUENCE { pimAnycastRPSetAddressType InetAddressType, pimAnycastRPSetAnycastAddress InetAddress, pimAnycastRPSetRouterAddress InetAddress, pimAnycastRPSetLocalRouter TruthValue, pimAnycastRPSetRowStatus RowStatus, pimAnycastRPSetStorageType StorageType } pimAnycastRPSetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of the Anycast-RP address and router address." ::= { pimAnycastRPSetEntry 1 } pimAnycastRPSetAnycastAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Anycast-RP address. The InetAddressType is given by the pimAnycastRPSetAddressType object." ::= { pimAnycastRPSetEntry 2 } pimAnycastRPSetRouterAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of a router that is a member of the Anycast-RP set. The InetAddressType is given by the pimAnycastRPSetAddressType object. This address differs from pimAnycastRPSetAnycastAddress. Equal values for these two addresses in a single entry are not permitted. That would cause a Register loop." ::= { pimAnycastRPSetEntry 3 } pimAnycastRPSetLocalRouter OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether this entry corresponds to the local router." ::= { pimAnycastRPSetEntry 4 } pimAnycastRPSetRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row, by which rows in this table can be created and destroyed. This status object can be set to active(1) without setting any other columnar objects in this entry. All writable objects in this entry can be modified when the status of this entry is active(1)." ::= { pimAnycastRPSetEntry 5 } pimAnycastRPSetStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this row. Rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { pimAnycastRPSetEntry 6 } -- -- The PIM Group Mapping Table -- pimGroupMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF PimGroupMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing mappings from multicast group prefixes to the PIM mode and RP address to use for groups within that group prefix. Rows in this table are created for a variety of reasons, indicated by the value of the pimGroupMappingOrigin object. - Rows with a pimGroupMappingOrigin value of 'fixed' are created automatically by the router at startup, to correspond to the well-defined prefixes of link-local and unroutable group addresses. These rows are never destroyed. - Rows with a pimGroupMappingOrigin value of 'embedded' are created by the router to correspond to group prefixes that are to be treated as being in Embedded-RP format. - Rows with a pimGroupMappingOrigin value of 'configRp' are created and destroyed as a result of rows in the pimStaticRPTable being created and destroyed. - Rows with a pimGroupMappingOrigin value of 'configSsm' are created and destroyed as a result of configuration of SSM address ranges to the local router. - Rows with a pimGroupMappingOrigin value of 'bsr' are created as a result of running the PIM Bootstrap Router (BSR) mechanism. If the local router is not the elected BSR, these rows are created to correspond to group prefixes in the PIM Bootstrap messages received from the elected BSR. If the local router is the elected BSR, these rows are created to correspond to group prefixes in the PIM Bootstrap messages that the local router sends. In either case, these rows are destroyed when the group prefixes are timed out by the BSR mechanism. - Rows with a pimGroupMappingOrigin value of 'other' are created and destroyed according to some other mechanism not specified here. Given the collection of rows in this table at any point in time, the PIM mode and RP address to use for a particular group is determined using the following algorithm. 1. From the set of all rows, the subset whose group prefix contains the group in question are selected. 2. If there are no such rows, then the group mapping is undefined. 3. If there are multiple selected rows, and a subset is defined by pimStaticRPTable (pimGroupMappingOrigin value of 'configRp') with pimStaticRPOverrideDynamic set to TRUE, then this subset is selected. 4. From the selected subset of rows, the subset that have the greatest value of pimGroupMappingGrpPrefixLength are selected. 5. If there are still multiple selected rows, the subset that has the highest precedence (the lowest numerical value for pimGroupMappingPrecedence) is selected. 6. If there are still multiple selected rows, the row selected is implementation dependent; the implementation might or might not apply the PIM hash function to select the row. 7. The group mode to use is given by the value of pimGroupMappingPimMode from the single selected row; the RP to use is given by the value of pimGroupMappingRPAddress, unless pimGroupMappingOrigin is 'embedded', in which case, the RP is extracted from the group address in question." REFERENCE "RFC 4601 section 3.7, RFC 3956, and RFC 4610" ::= { pim 13 } pimGroupMappingEntry OBJECT-TYPE SYNTAX PimGroupMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the pimGroupMappingTable." INDEX { pimGroupMappingOrigin, pimGroupMappingAddressType, pimGroupMappingGrpAddress, pimGroupMappingGrpPrefixLength, pimGroupMappingRPAddressType, pimGroupMappingRPAddress } ::= { pimGroupMappingTable 1 } PimGroupMappingEntry ::= SEQUENCE { pimGroupMappingOrigin PimGroupMappingOriginType, pimGroupMappingAddressType InetAddressType, pimGroupMappingGrpAddress InetAddress, pimGroupMappingGrpPrefixLength InetAddressPrefixLength, pimGroupMappingRPAddressType InetAddressType, pimGroupMappingRPAddress InetAddress, pimGroupMappingPimMode PimMode, pimGroupMappingPrecedence Unsigned32 } pimGroupMappingOrigin OBJECT-TYPE SYNTAX PimGroupMappingOriginType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The mechanism by which this group mapping was learned." ::= { pimGroupMappingEntry 1 } pimGroupMappingAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of the IP multicast group prefix." ::= { pimGroupMappingEntry 2 } pimGroupMappingGrpAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast group address that, when combined with pimGroupMappingGrpPrefixLength, gives the group prefix for this mapping. The InetAddressType is given by the pimGroupMappingAddressType object. This address object is only significant up to pimGroupMappingGrpPrefixLength bits. The remainder of the address bits are zero. This is especially important for this index field, which is part of the index of this entry. Any non-zero bits would signify an entirely different entry." ::= { pimGroupMappingEntry 3 } pimGroupMappingGrpPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength (4..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The multicast group prefix length that, when combined with pimGroupMappingGrpAddress, gives the group prefix for this mapping. The InetAddressType is given by the pimGroupMappingAddressType object. If pimGroupMappingAddressType is 'ipv4' or 'ipv4z', this object must be in the range 4..32. If pimGroupMappingAddressType is 'ipv6' or 'ipv6z', this object must be in the range 8..128." ::= { pimGroupMappingEntry 4 } pimGroupMappingRPAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of the RP to be used for groups within this group prefix, or unknown(0) if no RP is to be used or if the RP address is unknown. This object must be unknown(0) if pimGroupMappingPimMode is ssm(2), or if pimGroupMappingOrigin is embedded(6)." ::= { pimGroupMappingEntry 5 } pimGroupMappingRPAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|8|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address of the RP to be used for groups within this group prefix. The InetAddressType is given by the pimGroupMappingRPAddressType object." ::= { pimGroupMappingEntry 6 } pimGroupMappingPimMode OBJECT-TYPE SYNTAX PimMode MAX-ACCESS read-only STATUS current DESCRIPTION "The PIM mode to be used for groups in this group prefix." ::= { pimGroupMappingEntry 7 } pimGroupMappingPrecedence OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The precedence of this row, used in the algorithm that determines which row applies to a given group address (described above). Numerically higher values for this object indicate lower precedences, with the value zero denoting the highest precedence. The absolute values of this object have a significance only on the local router and do not need to be coordinated with other routers." ::= { pimGroupMappingEntry 8 } -- -- PIM Notifications -- pimNeighborLoss NOTIFICATION-TYPE OBJECTS { pimNeighborUpTime } STATUS current DESCRIPTION "A pimNeighborLoss notification signifies the loss of an adjacency with a neighbor. This notification should be generated when the neighbor timer expires, and the router has no other neighbors on the same interface with the same IP version and a lower IP address than itself. This notification is generated whenever the counter pimNeighborLossCount is incremented, subject to the rate limit specified by pimNeighborLossNotificationPeriod." REFERENCE "RFC 4601 section 4.3.2" ::= { pimNotifications 1 } pimInvalidRegister NOTIFICATION-TYPE OBJECTS { pimGroupMappingPimMode, pimInvalidRegisterAddressType, pimInvalidRegisterOrigin, pimInvalidRegisterGroup, pimInvalidRegisterRp } STATUS current DESCRIPTION "A pimInvalidRegister notification signifies that an invalid PIM Register message was received by this device. This notification is generated whenever the counter pimInvalidRegisterMsgsRcvd is incremented, subject to the rate limit specified by pimInvalidRegisterNotificationPeriod." REFERENCE "RFC 4601 section 4.4.2" ::= { pimNotifications 2 } pimInvalidJoinPrune NOTIFICATION-TYPE OBJECTS { pimGroupMappingPimMode, pimInvalidJoinPruneAddressType, pimInvalidJoinPruneOrigin, pimInvalidJoinPruneGroup, pimInvalidJoinPruneRp, pimNeighborUpTime } STATUS current DESCRIPTION "A pimInvalidJoinPrune notification signifies that an invalid PIM Join/Prune message was received by this device. This notification is generated whenever the counter pimInvalidJoinPruneMsgsRcvd is incremented, subject to the rate limit specified by pimInvalidJoinPruneNotificationPeriod." REFERENCE "RFC 4601 section 4.5.2" ::= { pimNotifications 3 } pimRPMappingChange NOTIFICATION-TYPE OBJECTS { pimGroupMappingPimMode, pimGroupMappingPrecedence } STATUS current DESCRIPTION "A pimRPMappingChange notification signifies a change to the active RP mapping on this device. This notification is generated whenever the counter pimRPMappingChangeCount is incremented, subject to the rate limit specified by pimRPMappingChangeNotificationPeriod." ::= { pimNotifications 4 } pimInterfaceElection NOTIFICATION-TYPE OBJECTS { pimInterfaceAddressType, pimInterfaceAddress } STATUS current DESCRIPTION "A pimInterfaceElection notification signifies that a new DR or DF has been elected on a network. This notification is generated whenever the counter pimInterfaceElectionWinCount is incremented, subject to the rate limit specified by pimInterfaceElectionNotificationPeriod." REFERENCE "RFC 4601 section 4.3.2 and RFC 5015 section 3.5.2" ::= { pimNotifications 5 } -- -- Conformance Information -- pimMIBConformance OBJECT IDENTIFIER ::= { pimStdMIB 2 } pimMIBCompliances OBJECT IDENTIFIER ::= { pimMIBConformance 1 } pimMIBGroups OBJECT IDENTIFIER ::= { pimMIBConformance 2 } -- -- Compliance Statements -- pimMIBComplianceAsm MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for routers which are running PIM-SM (Sparse Mode)." MODULE -- this module MANDATORY-GROUPS { pimTopologyGroup, pimSsmGroup, pimRPConfigGroup, pimSmGroup } GROUP pimNotificationGroup DESCRIPTION "This group is optional." GROUP pimTuningParametersGroup DESCRIPTION "This group is optional." GROUP pimRouterStatisticsGroup DESCRIPTION "This group is optional." GROUP pimAnycastRpGroup DESCRIPTION "This group is optional." GROUP pimStaticRPPrecedenceGroup DESCRIPTION "This group is optional." GROUP pimNetMgmtNotificationObjects DESCRIPTION "This group is optional." GROUP pimNetMgmtNotificationGroup DESCRIPTION "This group is optional." GROUP pimDiagnosticsGroup DESCRIPTION "This group is optional." GROUP pimDeviceStorageGroup DESCRIPTION "This group is optional." ::= { pimMIBCompliances 1 } pimMIBComplianceBidir MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for routers which are running Bidir-PIM." MODULE -- this module MANDATORY-GROUPS { pimTopologyGroup, pimRPConfigGroup, pimSmGroup, pimBidirGroup } GROUP pimNotificationGroup DESCRIPTION "This group is optional." GROUP pimTuningParametersGroup DESCRIPTION "This group is optional." GROUP pimRouterStatisticsGroup DESCRIPTION "This group is optional." GROUP pimAnycastRpGroup DESCRIPTION "This group is optional." GROUP pimStaticRPPrecedenceGroup DESCRIPTION "This group is optional." GROUP pimNetMgmtNotificationObjects DESCRIPTION "This group is optional." GROUP pimNetMgmtNotificationGroup DESCRIPTION "This group is optional." GROUP pimDiagnosticsGroup DESCRIPTION "This group is optional." GROUP pimDeviceStorageGroup DESCRIPTION "This group is optional." ::= { pimMIBCompliances 2 } pimMIBComplianceSsm MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for routers which are running PIM SSM (Source Specific Multicast)." MODULE -- this module MANDATORY-GROUPS { pimTopologyGroup, pimSsmGroup } GROUP pimNotificationGroup DESCRIPTION "This group is optional." GROUP pimTuningParametersGroup DESCRIPTION "This group is optional." GROUP pimRouterStatisticsGroup DESCRIPTION "This group is optional." GROUP pimNetMgmtNotificationObjects DESCRIPTION "This group is optional." GROUP pimNetMgmtNotificationGroup DESCRIPTION "This group is optional." GROUP pimDiagnosticsGroup DESCRIPTION "This group is optional." GROUP pimDeviceStorageGroup DESCRIPTION "This group is optional." ::= { pimMIBCompliances 3 } pimMIBComplianceDm MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for routers which are running PIM-DM (Dense Mode)." MODULE -- this module MANDATORY-GROUPS { pimTopologyGroup, pimSsmGroup, pimRPConfigGroup, pimSmGroup, pimDmGroup } GROUP pimNotificationGroup DESCRIPTION "This group is optional." GROUP pimTuningParametersGroup DESCRIPTION "This group is optional." GROUP pimRouterStatisticsGroup DESCRIPTION "This group is optional." GROUP pimAnycastRpGroup DESCRIPTION "This group is optional." GROUP pimStaticRPPrecedenceGroup DESCRIPTION "This group is optional." GROUP pimNetMgmtNotificationObjects DESCRIPTION "This group is optional." GROUP pimNetMgmtNotificationGroup DESCRIPTION "This group is optional." GROUP pimDiagnosticsGroup DESCRIPTION "This group is optional." GROUP pimDeviceStorageGroup DESCRIPTION "This group is optional." ::= { pimMIBCompliances 4 } -- -- Units of Conformance -- pimTopologyGroup OBJECT-GROUP OBJECTS { pimInterfaceAddressType, pimInterfaceAddress, pimInterfaceGenerationIDValue, pimInterfaceDR, pimInterfaceDRPriorityEnabled, pimInterfaceHelloHoldtime, pimInterfaceJoinPruneHoldtime, pimInterfaceLanDelayEnabled, pimInterfaceEffectPropagDelay, pimInterfaceEffectOverrideIvl, pimInterfaceSuppressionEnabled, pimInterfaceBidirCapable, pimNeighborGenerationIDPresent, pimNeighborGenerationIDValue, pimNeighborUpTime, pimNeighborExpiryTime, pimNeighborDRPriorityPresent, pimNeighborDRPriority, pimNeighborLanPruneDelayPresent, pimNeighborTBit, pimNeighborPropagationDelay, pimNeighborOverrideInterval, pimNeighborBidirCapable, pimNbrSecAddress } STATUS current DESCRIPTION "A collection of read-only objects used to report local PIM topology." ::= { pimMIBGroups 1 } pimNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { pimNeighborLoss } STATUS current DESCRIPTION "A collection of notifications for signaling important PIM events." ::= { pimMIBGroups 2 } pimTuningParametersGroup OBJECT-GROUP OBJECTS { pimKeepalivePeriod, pimRegisterSuppressionTime, pimInterfaceDRPriority, pimInterfaceHelloInterval, pimInterfaceTrigHelloInterval, pimInterfaceJoinPruneInterval, pimInterfacePropagationDelay, pimInterfaceOverrideInterval, pimInterfaceDomainBorder, pimInterfaceStubInterface, pimInterfaceStatus, pimInterfaceStorageType } STATUS current DESCRIPTION "A collection of writable objects used to configure PIM behavior and to tune performance." ::= { pimMIBGroups 3 } pimRouterStatisticsGroup OBJECT-GROUP OBJECTS { pimStarGEntries, pimStarGIEntries, pimSGEntries, pimSGIEntries, pimSGRptEntries, pimSGRptIEntries } STATUS current DESCRIPTION "A collection of statistics global to the PIM router." ::= { pimMIBGroups 4 } pimSsmGroup OBJECT-GROUP OBJECTS { pimSGUpTime, pimSGPimMode, pimSGUpstreamJoinState, pimSGUpstreamJoinTimer, pimSGUpstreamNeighbor, pimSGRPFIfIndex, pimSGRPFNextHopType, pimSGRPFNextHop, pimSGRPFRouteProtocol, pimSGRPFRouteAddress, pimSGRPFRoutePrefixLength, pimSGRPFRouteMetricPref, pimSGRPFRouteMetric, pimSGSPTBit, pimSGKeepaliveTimer, pimSGDRRegisterState, pimSGDRRegisterStopTimer, pimSGRPRegisterPMBRAddressType, pimSGRPRegisterPMBRAddress, pimSGIUpTime, pimSGILocalMembership, pimSGIJoinPruneState, pimSGIPrunePendingTimer, pimSGIJoinExpiryTimer, pimSGIAssertState, pimSGIAssertTimer, pimSGIAssertWinnerAddressType, pimSGIAssertWinnerAddress, pimSGIAssertWinnerMetricPref, pimSGIAssertWinnerMetric } STATUS current DESCRIPTION "A collection of objects to support management of PIM routers running the PIM SSM (Source Specific Multicast) protocol, in PIM mode SM (Sparse Mode)." ::= { pimMIBGroups 5 } pimRPConfigGroup OBJECT-GROUP OBJECTS { pimStaticRPRPAddress, pimStaticRPPimMode, pimStaticRPOverrideDynamic, pimStaticRPRowStatus, pimStaticRPStorageType, pimGroupMappingPimMode, pimGroupMappingPrecedence } STATUS current DESCRIPTION "A collection of objects to support configuration of RPs (Rendezvous Points) and Group Mappings." ::= { pimMIBGroups 6 } pimSmGroup OBJECT-GROUP OBJECTS { pimStarGUpTime, pimStarGPimMode, pimStarGRPAddressType, pimStarGRPAddress, pimStarGPimModeOrigin, pimStarGRPIsLocal, pimStarGUpstreamJoinState, pimStarGUpstreamJoinTimer, pimStarGUpstreamNeighborType, pimStarGUpstreamNeighbor, pimStarGRPFIfIndex, pimStarGRPFNextHopType, pimStarGRPFNextHop, pimStarGRPFRouteProtocol, pimStarGRPFRouteAddress, pimStarGRPFRoutePrefixLength, pimStarGRPFRouteMetricPref, pimStarGRPFRouteMetric, pimStarGIUpTime, pimStarGILocalMembership, pimStarGIJoinPruneState, pimStarGIPrunePendingTimer, pimStarGIJoinExpiryTimer, pimStarGIAssertState, pimStarGIAssertTimer, pimStarGIAssertWinnerAddressType, pimStarGIAssertWinnerAddress, pimStarGIAssertWinnerMetricPref, pimStarGIAssertWinnerMetric, pimSGRptUpTime, pimSGRptUpstreamPruneState, pimSGRptUpstreamOverrideTimer, pimSGRptIUpTime, pimSGRptILocalMembership, pimSGRptIJoinPruneState, pimSGRptIPrunePendingTimer, pimSGRptIPruneExpiryTimer } STATUS current DESCRIPTION "A collection of objects to support management of PIM routers running PIM-SM (Sparse Mode). The groups pimSsmGroup and pimRPConfigGroup are also required." ::= { pimMIBGroups 7 } pimBidirGroup OBJECT-GROUP OBJECTS { pimInterfaceDFElectionRobustness, pimBidirDFElectionWinnerAddressType, pimBidirDFElectionWinnerAddress, pimBidirDFElectionWinnerUpTime, pimBidirDFElectionWinnerMetricPref, pimBidirDFElectionWinnerMetric, pimBidirDFElectionState, pimBidirDFElectionStateTimer } STATUS current DESCRIPTION "A collection of objects to support management of PIM routers running BIDIR mode. The groups pimSsmGroup, pimSmGroup and pimRPConfigGroup are also required." ::= { pimMIBGroups 8 } pimAnycastRpGroup OBJECT-GROUP OBJECTS { pimAnycastRPSetLocalRouter, pimAnycastRPSetRowStatus, pimAnycastRPSetStorageType } STATUS current DESCRIPTION "A collection of objects to support management of the PIM Anycast-RP mechanism." ::= { pimMIBGroups 9 } pimStaticRPPrecedenceGroup OBJECT-GROUP OBJECTS { pimStaticRPPrecedence } STATUS current DESCRIPTION "A collection of objects to allow fine control of interactions between static RP configuration and dynamically acquired group to RP mappings." ::= { pimMIBGroups 10 } pimNetMgmtNotificationObjects OBJECT-GROUP OBJECTS { pimInvalidRegisterNotificationPeriod, pimInvalidRegisterMsgsRcvd, pimInvalidRegisterAddressType, pimInvalidRegisterOrigin, pimInvalidRegisterGroup, pimInvalidRegisterRp, pimInvalidJoinPruneNotificationPeriod, pimInvalidJoinPruneMsgsRcvd, pimInvalidJoinPruneAddressType, pimInvalidJoinPruneOrigin, pimInvalidJoinPruneGroup, pimInvalidJoinPruneRp, pimRPMappingNotificationPeriod, pimRPMappingChangeCount, pimInterfaceElectionNotificationPeriod, pimInterfaceElectionWinCount } STATUS current DESCRIPTION "A collection of objects to support notification of PIM network management events." ::= { pimMIBGroups 11 } pimNetMgmtNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { pimInvalidRegister, pimInvalidJoinPrune, pimRPMappingChange, pimInterfaceElection } STATUS current DESCRIPTION "A collection of notifications for signaling PIM network management events." ::= { pimMIBGroups 12 } pimDiagnosticsGroup OBJECT-GROUP OBJECTS { pimInAsserts, pimOutAsserts, pimLastAssertInterface, pimLastAssertGroupAddressType, pimLastAssertGroupAddress, pimLastAssertSourceAddressType, pimLastAssertSourceAddress, pimNeighborLossNotificationPeriod, pimNeighborLossCount } STATUS current DESCRIPTION "Objects providing additional diagnostics related to a PIM router." ::= { pimMIBGroups 13 } pimDmGroup OBJECT-GROUP OBJECTS { pimRefreshInterval, pimInterfacePruneLimitInterval, pimInterfaceGraftRetryInterval, pimInterfaceSRPriorityEnabled, pimNeighborSRCapable, pimSGUpstreamPruneState, pimSGUpstreamPruneLimitTimer, pimSGOriginatorState, pimSGSourceActiveTimer, pimSGStateRefreshTimer } STATUS current DESCRIPTION "A collection of objects required for management of PIM Dense Mode (PIM-DM) function. The groups pimSsmGroup and pimSmGroup are also required." REFERENCE "RFC 3973" ::= { pimMIBGroups 14 } pimDeviceStorageGroup OBJECT-GROUP OBJECTS { pimDeviceConfigStorageType } STATUS current DESCRIPTION "An object that specifies the volatility of global PIM configuration settings on this device." ::= { pimMIBGroups 15 } END