-- ================================================================== -- Copyright (C) 2005 by HUAWEI TECHNOLOGIES. All rights reserved. -- -- Description: HUAWEI Private Extended Interface MIB -- Reference: -- Version: V1.0 -- History: -- V1.0 -- ================================================================== -- ================================================================== -- -- Variables and types be imported -- -- ================================================================== HUAWEI-IF-EXT-MIB DEFINITIONS ::= BEGIN IMPORTS hwDatacomm FROM HUAWEI-MIB ifIndex, ifName, InterfaceIndex,InterfaceIndexOrZero,ifAdminStatus,ifOperStatus,ifDescr FROM IF-MIB VlanIdOrNone, PortList FROM Q-BRIDGE-MIB OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF IpAddress, Integer32, Unsigned32, Counter64, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI sysUpTime FROM SNMPv2-MIB RowStatus, TruthValue, DisplayString,PhysAddress,TEXTUAL-CONVENTION FROM SNMPv2-TC AtmVpIdentifier, AtmVcIdentifier FROM ATM-TC-MIB ipAdEntNetMask FROM IP-MIB; hwIFExtMib MODULE-IDENTITY LAST-UPDATED "200610312230Z" -- October 31, 2006 at 22:30 GMT ORGANIZATION "Huawei Technologies co.,Ltd." CONTACT-INFO "VRP Team Huawei Technologies co.,Ltd. Huawei Bld.,NO.3 Xinxi Rd., Shang-Di Information Industry Base, Hai-Dian District Beijing P.R. China http://www.huawei.com Zip:100085 " DESCRIPTION "Some attribute of interface extended content, information of interface IP, interface of trunk interface." ::= { hwDatacomm 41 } -- -- Textual conventions -- -- Textual Convention EnabledStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A simple status value for the object." SYNTAX INTEGER { enabled(1), disabled(2) } SnmpPasswdString ::= TEXTUAL-CONVENTION DISPLAY-HINT "16a" STATUS current DESCRIPTION "The password string" SYNTAX OCTET STRING (SIZE (0..16)) HWDirectionType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Direction Flux Limit apply on." SYNTAX INTEGER { inbound(1), outbound(2) } -- ============================================================================ -- interface IP address group -- ============================================================================ HwIpAddressType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The type of IP address." SYNTAX INTEGER { primary(1), sub(2) } -- -- Node definitions -- hwIFExtObjects OBJECT IDENTIFIER ::= { hwIFExtMib 1 } -- ==================================================================== -- basic interface extended definition group -- ==================================================================== hwIFExtBase OBJECT IDENTIFIER ::= { hwIFExtObjects 1 } -- =========================================================================== -- interface extended group -- ============================================================================ hwIFExtTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIFExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface extended table of private mib." ::= { hwIFExtBase 1 } hwIFExtEntry OBJECT-TYPE SYNTAX HwIFExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of private extended interface table." INDEX { hwIFExtIndex } ::= { hwIFExtTable 1 } HwIFExtEntry ::= SEQUENCE { hwIFExtIndex InterfaceIndex, hwIFExtLayer INTEGER, hwIFExtFrameType INTEGER, hwIFExtFlowStatInterval Integer32, hwIFExtFlushReceiveEnable EnabledStatus, hwIFExtFlushVlanId VlanIdOrNone, hwIFExtFlushPasswd SnmpPasswdString, hwIFExtFlowStatus INTEGER, hwIFExtMtu Integer32, hwIFExtMacAddr PhysAddress, hwIFExtBlockPriority Integer32, hwIFExtMacShift INTEGER, hwIFExtSuppressStatus INTEGER } hwIFExtIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of extended table of interface." ::= { hwIFExtEntry 1 } hwIFExtLayer OBJECT-TYPE SYNTAX INTEGER { layer2(1), layer3(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Switch the port between Layer3 and Layer2. Corresponding to the port switch command.Layer2(1) is 1 when the port switch from layer3 to layer2.Layer3(1) is 1 when the port switch from lyaer2 to layer3." ::= { hwIFExtEntry 2 } hwIFExtFrameType OBJECT-TYPE SYNTAX INTEGER { ethernetII(1), ethernetSnap(2), ethernet8022(3), ethernet8023(4), other(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Frame type is accepted by VLAN virtual interfaces.Frame format contains ethernetII(1),ethernetII(2),ethernet8022(3),ethernet8023. The type location setting 1 when the ethernetII(1) type is accepted.Now only surpport the first(ethernetII(1))" ::= { hwIFExtEntry 3 } -- metric: second hwIFExtFlowStatInterval OBJECT-TYPE SYNTAX Integer32 (10..600) MAX-ACCESS read-write STATUS current DESCRIPTION "Interval of interface flow stat.The value of interval must be divided exactly by 10.The interface interval is effective,when both interface interval and global interval are config.Globle interval is only effective in interfaces,which interface interval is not configured. The real time property of interface flow stat rate will be affected by the value of interval." DEFVAL { 300 } ::= { hwIFExtEntry 4 } hwIFExtFlushReceiveEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Whether or not permit the port to take over FLUSHDUs. Once it is enabled, the port will take over SmartLink FlushDUs from related vlans so as to delete the MAC forwarding table in the local equipment." DEFVAL { disabled } ::= { hwIFExtEntry 5 } hwIFExtFlushVlanId OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS read-write STATUS current DESCRIPTION "The ID of Vlan the port belongs to.When it is 0, it indicates the function of receiving FlushPDU is disabled." DEFVAL { 0 } ::= { hwIFExtEntry 6 } hwIFExtFlushPasswd OBJECT-TYPE SYNTAX SnmpPasswdString MAX-ACCESS read-write STATUS current DESCRIPTION "A 16-octet read-write value used to define the password for negotiation." DEFVAL { '00'h } ::= { hwIFExtEntry 7 } hwIFExtFlowStatus OBJECT-TYPE SYNTAX INTEGER { flowUp(1), flowDown(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " Current flow status of interface. 1:flow up 2:flow down" ::= { hwIFExtEntry 8 } hwIFExtMtu OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Max Transmit Unit of the interface." ::= { hwIFExtEntry 9 } hwIFExtMacAddr OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address of the interface ." ::= { hwIFExtEntry 10 } hwIFExtBlockPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The blocked priority of the interface." ::= { hwIFExtEntry 11 } hwIFExtMacShift OBJECT-TYPE SYNTAX INTEGER { normal(1), macShift(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The mac-shift state of the interface. 1:normal 2:monitor mac-shift" ::= { hwIFExtEntry 12 } hwIFExtSuppressStatus OBJECT-TYPE SYNTAX INTEGER { unsuppress(0), suppress(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The suppress state of the interface. 0:unsuppress 1:suppress" ::= { hwIFExtEntry 13 } hwIFExtPhyStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The physical status of member interface." ::= { hwIFExtBase 2 } hwIFExtMemberOf OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The description of the main interface which has the membership with the member interface." ::= { hwIFExtBase 3 } hwLinkModeChangeAutoCreateIfTable OBJECT-TYPE SYNTAX SEQUENCE OF HwLinkModeChangeAutoCreateIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface extended table of private mib." ::= { hwIFExtBase 4 } hwLinkModeChangeAutoCreateIfEntry OBJECT-TYPE SYNTAX HwLinkModeChangeAutoCreateIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of private extended interface table." INDEX { hwAutoIfIndex } ::= { hwLinkModeChangeAutoCreateIfTable 1 } HwLinkModeChangeAutoCreateIfEntry ::= SEQUENCE { hwAutoIfIndex InterfaceIndex, hwNewIfTimeslot BITS } hwAutoIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of extended table of interface." ::= { hwLinkModeChangeAutoCreateIfEntry 1 } hwNewIfTimeslot OBJECT-TYPE SYNTAX BITS{ timeslot0(0), timeslot1(1), timeslot2(2), timeslot3(3), timeslot4(4), timeslot5(5), timeslot6(6), timeslot7(7), timeslot8(8), timeslot9(9), timeslot10(10), timeslot11(11), timeslot12(12), timeslot13(13), timeslot14(14), timeslot15(15), timeslot16(16), timeslot17(17), timeslot18(18), timeslot19(19), timeslot20(20), timeslot21(21), timeslot22(22), timeslot23(23), timeslot24(24), timeslot25(25), timeslot26(26), timeslot27(27), timeslot28(28), timeslot29(29), timeslot30(30), timeslot31(31) } MAX-ACCESS read-only STATUS current DESCRIPTION "The time slot of the TDM interface: timeslot0(0):The time slot 0 on the TDM interface, timeslot1(1):The time slot 1 on the TDM interface, timeslot2(2):The time slot 2 on the TDM interface, timeslot3(3):The time slot 3 on the TDM interface, timeslot4(4):The time slot 4 on the TDM interface, timeslot5(5):The time slot 5 on the TDM interface, timeslot6(6):The time slot 6 on the TDM interface, timeslot7(7):The time slot 7 on the TDM interface, timeslot8(8):The time slot 8 on the TDM interface, timeslot9(9):The time slot 9 on the TDM interface, timeslot10(10):The time slot 10 on the TDM interface, timeslot11(11):The time slot 11 on the TDM interface, timeslot12(12):The time slot 12 on the TDM interface, timeslot13(13):The time slot 13 on the TDM interface, timeslot14(14):The time slot 14 on the TDM interface, timeslot15(15):The time slot 15 on the TDM interface, timeslot16(16):The time slot 16 on the TDM interface, timeslot17(17):The time slot 17 on the TDM interface, timeslot18(18):The time slot 18 on the TDM interface, timeslot19(19):The time slot 19 on the TDM interface, timeslot20(20):The time slot 20 on the TDM interface, timeslot21(21):The time slot 21 on the TDM interface, timeslot22(22):The time slot 22 on the TDM interface, timeslot23(23):The time slot 23 on the TDM interface, timeslot24(24):The time slot 24 on the TDM interface, timeslot25(25):The time slot 25 on the TDM interface, timeslot26(26):The time slot 26 on the TDM interface, timeslot27(27):The time slot 27 on the TDM interface, timeslot28(28):The time slot 28 on the TDM interface, timeslot29(29):The time slot 29 on the TDM interface, timeslot30(30):The time slot 30 on the TDM interface, timeslot31(31):The time slot 31 on the TDM interface." ::= { hwLinkModeChangeAutoCreateIfEntry 2 } hwIFExtPhyNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the physical interfaces." ::= { hwIFExtBase 5 } hwInterfaceIp OBJECT IDENTIFIER ::= { hwIFExtObjects 2 } hwIfIpTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIfIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface IP address configuration table .It contains IP address, IP address mask, IP address acquiring method." ::= { hwInterfaceIp 1 } hwIfIpEntry OBJECT-TYPE SYNTAX HwIfIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Interface IP address configuration " INDEX { hwIpAdEntAddr } ::= { hwIfIpTable 1 } HwIfIpEntry ::= SEQUENCE { hwIpAdEntAddr IpAddress, hwIpAdEntIfIndex Integer32, hwIpAdEntNetMask IpAddress, hwIpAdEntBcastAddr Integer32, hwIpAdEntReasmMaxSize Integer32, hwIpAdEntAddressType HwIpAddressType, hwIfIpMethod INTEGER, hwIpAdEntAddrStatus RowStatus } hwIpAdEntAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address to which this entry's addressing information pertains." ::= { hwIfIpEntry 1 } hwIpAdEntIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { hwIfIpEntry 2 } hwIpAdEntNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the host bits set to 0." ::= { hwIfIpEntry 3 } hwIpAdEntBcastAddr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface." ::= { hwIfIpEntry 4 } hwIpAdEntReasmMaxSize OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagram received on this interface." ::= { hwIfIpEntry 5 } hwIpAdEntAddressType OBJECT-TYPE SYNTAX HwIpAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The flag indicates whether the IP address is primary IP address. One interface has only one primary IP address, but can have many sub IP address. So when add a primary IP address to an interface that has already a primary IP address, the new primary address will replace old primary address and the old primary address will be deleted." ::= { hwIfIpEntry 6 } hwIfIpMethod OBJECT-TYPE SYNTAX INTEGER { assignedIp(1), dhcpIp(2), bootpIp(3), other(4), linklayer(5), random(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Interface IP address acquiring method. assignedIp(1) indicates that the address was manually configured to a specified address, for example, by user configuration. dhcpIp(2) indicates an address that was assigned to this system by a DHCP server. bootpIp(3) indicates an address that was assigned to this system by the bootp protocol. other(4) indicates an address created by another method. linklayer(5) indicates an address created by IPv6 stateless auto-configuration. random(6) indicates an address chosen by the system at random, for example, an IPv4 address within 169.254/16, or an RFC 3041 privacy address." ::= { hwIfIpEntry 7 } hwIpAdEntAddrStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable." ::= { hwIfIpEntry 8 } hwIfIpUnnumberedTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIfIpUnnumberedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface IP address unnumbered table. It contains lend IP address and lend IP address mask." ::= { hwInterfaceIp 2} hwIfIpUnnumberedEntry OBJECT-TYPE SYNTAX HwIfIpUnnumberedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Interface IP address unnumbered configuration " INDEX { hwUnnumberedIfIndex } ::= {hwIfIpUnnumberedTable 1} HwIfIpUnnumberedEntry ::= SEQUENCE { hwUnnumberedIfIndex InterfaceIndex, hwLendIfIndex InterfaceIndex, hwLendIpAddr IpAddress, hwLendIpAddrNetMask IpAddress, hwUnnumberedRowStatus RowStatus } hwUnnumberedIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value of the unnumbered interface." ::= { hwIfIpUnnumberedEntry 1 } hwLendIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The index value of the lend interface." ::= { hwIfIpUnnumberedEntry 11 } hwLendIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the lend interface." ::= { hwIfIpUnnumberedEntry 12 } hwLendIpAddrNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address mask of the lend interface." ::= { hwIfIpUnnumberedEntry 13 } hwUnnumberedRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable." ::= { hwIfIpUnnumberedEntry 51 } -- ============================================================================ -- interface trunk attribute group -- ============================================================================ hwTrunkAttr OBJECT IDENTIFIER ::= { hwIFExtObjects 3 } hwTrunkIfMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of Trunk interface" ::= { hwTrunkAttr 1 } hwTrunkNextIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The nextindex of Trunk interface,that means its position" ::= { hwTrunkAttr 2 } hwTrunkIfTable OBJECT-TYPE SYNTAX SEQUENCE OF HwTrunkIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The trunk table." ::= { hwTrunkAttr 3 } hwTrunkIfEntry OBJECT-TYPE SYNTAX HwTrunkIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of the trunk table." INDEX { hwTrunkIndex } ::= { hwTrunkIfTable 1 } HwTrunkIfEntry ::= SEQUENCE { hwTrunkIndex Integer32, hwTrunkIfID Integer32, hwTrunkIfType INTEGER, hwTrunkIfIndex InterfaceIndex, hwTrunkIfModel INTEGER, hwTrunkIfBandWidthAffectLinkNum Integer32, hwTrunkIfMinLinkNum Integer32, hwTrunkIfRowStatus RowStatus, hwTrunkIfWorkingMode INTEGER, hwTrunkIfWorkingState INTEGER, hwTrunkIfAutoRecover INTEGER, hwTrunkIfPreemptEnable INTEGER, hwTrunkIfPreemptDelay Integer32, hwTrunkIfTimeoutReceive INTEGER, hwTrunkIfFlushSendEnable INTEGER, hwTrunkIfFlushVlanId Integer32, hwTrunkIfFlushPasswd SnmpPasswdString, hwTrunkIfForceSwitchEnable INTEGER, hwTrunkIfStatReset INTEGER, hwTrunkBandwidth -- the band width of the trunk interface Integer32, hwTrunkIfArpSendSpeed Integer32, hwTrunkIfLagSelectedPortStd INTEGER, hwTrunkIfLagMaxActiveLinkNum Integer32, hwTrunkETrunkPriority Integer32, hwTrunkETrunkSysID PhysAddress, hwTrunkETrunkPriorityReset INTEGER, hwTrunkETrunkSysIDReset INTEGER, hwTrunkLocalPrefMode INTEGER, hwTrunkIfTrackVrrpVrid Integer32, hwTrunkIfTrackVrrpIfIndex InterfaceIndex, hwTrunkIfTrackVrrpReset INTEGER, hwTrunkIfBackupPreemptEnable EnabledStatus, hwTrunkIfBackupPreemptDelay Integer32 } -- the max bandwidth-affected-linknumber -- the least active-linknumber of the up port hwTrunkIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " The number of the Trunk interface " ::= { hwTrunkIfEntry 1 } hwTrunkIfID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " The identification of the Trunk interface.It may identify Trunk and is an index of the interface." ::= { hwTrunkIfEntry 2 } hwTrunkIfType OBJECT-TYPE SYNTAX INTEGER { ethTrunk(1), ipTrunk(2) } MAX-ACCESS read-create STATUS current DESCRIPTION " The type of the Trunk interface includes eth-trunk and ip-trunk. The ip-trunk is only comprised by pos link, otherwise the eth-trunk is only comprised by ethernet link." ::= { hwTrunkIfEntry 3 } hwTrunkIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION " Index number of the Trunk interface,it is consistent with ifIndex of ifTable in IF-MIB." ::= { hwTrunkIfEntry 4 } hwTrunkIfModel OBJECT-TYPE SYNTAX INTEGER { packetAll(1), sourceDesMac(2), packetUdp(3), packetTcp(4), sourceDesIp(5), sourceMacIpv6(6), sourceIpIpv6(7), sourceIp(8), desIp(9), sourceMac(10), desMac(11), sourcePort(12), desPort(13), sourceDesPort(14), fwdType(15), qos(16), labelNum(17), label(18), invalid(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Participated model of interface load. sourceDesMac(1) and sourceMac(10) and desMac(11) are Layer2 hash arithmetic." ::= { hwTrunkIfEntry 5 } hwTrunkIfBandWidthAffectLinkNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " The max bandwidth-affected-linknumber, by default, an Eth-Trunk interface has a maximum of 16 physical interfaces. The number of physical interfaces in an Eth-Trunk interface varies according to the product type.Only in layer 2,can set this value." ::= { hwTrunkIfEntry 6 } hwTrunkIfMinLinkNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " The Trunk port changes to up when the number of the up port reach hwTrunkIfMinLinkNum. " ::= { hwTrunkIfEntry 7 } hwTrunkIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Current operation status of the row " ::= { hwTrunkIfEntry 8 } hwTrunkIfWorkingMode OBJECT-TYPE SYNTAX INTEGER { masterBackup(1), normalMode(2), lacpStaticMode(3), invalid(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION " Current working mode of trunk. 1:master/backup access mode 2:normal mode 3:lacp static mode" ::= { hwTrunkIfEntry 9 } hwTrunkIfWorkingState OBJECT-TYPE SYNTAX INTEGER { generalMode(1), initialization(2), masterWorking(3), backupWorking(4), invalid(-1) } MAX-ACCESS read-only STATUS current DESCRIPTION " Current working state of backup-access trunk. 1:general mode working state 2:initialization 3:master working 4:backup working" ::= { hwTrunkIfEntry 10 } hwTrunkIfAutoRecover OBJECT-TYPE SYNTAX INTEGER { generalMode(1), autoRecover(2), invalid(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION " If auto-recover has been set, the master port will be working instead of the other port when it changes from down state to up state. 1: don't support auto-recover 2: support auto-recover" ::= { hwTrunkIfEntry 11 } hwTrunkIfPreemptEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), invalid(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The preemption according to the priority will be and only be enabled when the lag port is working in static mode(M:N backup mode) In default condition, the preemption is disabled." DEFVAL { disabled } ::= { hwTrunkIfEntry 12 } hwTrunkIfPreemptDelay OBJECT-TYPE SYNTAX Integer32 (10..180 | -1) MAX-ACCESS read-create STATUS current DESCRIPTION "The waiting time for priority preemption; Unit: second. It is enabled only when the priority preemption is enabled. It indicates, When it comes to priority preemption, the operation of preemption will be delayed for hwTrunkIfPreemptDelay time." DEFVAL { 30 } ::= { hwTrunkIfEntry 13 } hwTrunkIfTimeoutReceive OBJECT-TYPE SYNTAX INTEGER { fast(1), slow(2), invalid(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The expired time for the port to receive LACPDUS. There are two types: 1.fast: 3 seconds 2.slow: 90 seconds" ::= { hwTrunkIfEntry 14 } hwTrunkIfFlushSendEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), invalid(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Whether or not permit the trunk to transmit FlushDUs.It is only used when it is in the handwork 1:1 mode.Once it is enabled, the newly active interface in the trunk will send SmartLink FlushDUs so as to delete the related MAC forwarding table of the layer2 equipment in network.Otherwise, SmartLink FlushDUs will not be sent." DEFVAL { disabled } ::= { hwTrunkIfEntry 15 } hwTrunkIfFlushVlanId OBJECT-TYPE SYNTAX Integer32 (0..4094 | -1) MAX-ACCESS read-create STATUS current DESCRIPTION "The ID of Vlan the partner port belongs to.When it is 0, it indicates the function of sending FlushPDU is disabled. " DEFVAL { 0 } ::= { hwTrunkIfEntry 16 } hwTrunkIfFlushPasswd OBJECT-TYPE SYNTAX SnmpPasswdString MAX-ACCESS read-create STATUS current DESCRIPTION "A 16-octet read-create value used to define the password for negotiation." DEFVAL { '00'h } ::= { hwTrunkIfEntry 17 } hwTrunkIfForceSwitchEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), invalid(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "It is only used when it is in the handwork 1:1 mode and the current working link is the backup link. At that time, working link will move from backup link to master link. However, if the master link is down, the operation will be forbidden." ::= { hwTrunkIfEntry 18 } hwTrunkIfStatReset OBJECT-TYPE SYNTAX INTEGER { reset(1), ready(2), invalid(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Reset the statistic information of LACPDUsRx,MarkerPDUsRx,LACPDUsTx, MarkerResponsePDUsTx for all the ports in the current trunk." ::= { hwTrunkIfEntry 19 } hwTrunkBandwidth OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " Current bandwidth of trunk in units of 1,000,000 bits per second. This bandwidth is the peculiar property of Eth-Trunk. And to the other kinds of trunk, this bandwidth is -1." ::= { hwTrunkIfEntry 20 } hwTrunkIfArpSendSpeed OBJECT-TYPE SYNTAX Integer32(800..3000 | -1) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the rate of sending gratuitous ARP packets (in pkts/sec) on the trunk member interface. " DEFVAL { 2000 } ::= { hwTrunkIfEntry 21 } hwTrunkIfLagSelectedPortStd OBJECT-TYPE SYNTAX INTEGER { speed(1), priority(2), invalid(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The static mode Eth-trunk selected port standard. There are two types: 1.speed : selected by port's speed 2.priority: selected by port's priority The default type is priority." DEFVAL { priority } ::= { hwTrunkIfEntry 22 } hwTrunkIfLagMaxActiveLinkNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The static mode Eth-trunk selected ports can not more than the value." ::= { hwTrunkIfEntry 23 } hwTrunkETrunkPriority OBJECT-TYPE SYNTAX Integer32 (0..65535 | -1) MAX-ACCESS read-write STATUS current DESCRIPTION "The priority of the E-Trunk." ::= { hwTrunkIfEntry 24 } hwTrunkETrunkSysID OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The system ID of the E-Trunk. If set ffff-ffff-ffff the system ID will be to default." ::= { hwTrunkIfEntry 25 } hwTrunkETrunkPriorityReset OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2), invalid(-1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Status of operation, there are yes(1) and no(2). It expresses whether the configure of E-Trunk priority is resetted." DEFVAL { no } ::= { hwTrunkIfEntry 26 } hwTrunkETrunkSysIDReset OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2), invalid(-1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Status of operation, there are yes(1) and no(2). It expresses whether the configure of E-Trunk system ID is resetted." DEFVAL { no } ::= { hwTrunkIfEntry 27 } hwTrunkLocalPrefMode OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Local-preference transmit mode of eth-trunk, there are enable(1) and disable(2).The default value is disable(2)." ::= { hwTrunkIfEntry 28 } hwTrunkIfTrackVrrpVrid OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The VRID which the static mode Eth-trunk tracked to." ::= { hwTrunkIfEntry 29 } hwTrunkIfTrackVrrpIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The VRRP interface which the static mode Eth-trunk tracked to." ::= { hwTrunkIfEntry 30 } hwTrunkIfTrackVrrpReset OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2), invalid(-1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Status of operation, there are yes(1) and no(2). The value of this object identifies whether the operation of clearing the configuration is performed. And the configuration is that the Eth-Trunk interface in static LACP mode is associated with an mVRRP backup group. The value yes(1) indicates performing the operation. This object indicates one operation but not one status, so when the operation is performed, the value is no(2). By default, the value is no(2)." ::= { hwTrunkIfEntry 31 } hwTrunkIfBackupPreemptEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The preemption according to the master and slave port will be and only be enabled when eth-trunk is working in backup mode. In default condition, the preemption is disabled." DEFVAL { disabled } ::= { hwTrunkIfEntry 32 } hwTrunkIfBackupPreemptDelay OBJECT-TYPE SYNTAX Integer32 (0..30 | -1) MAX-ACCESS read-write STATUS current DESCRIPTION "The waiting time for priority preemption; Unit: minute. It is enabled only when the priority preemption is enabled. It indicates, When it comes to priority preemption, the operation of preemption will be delayed for hwTrunkIfBackupPreemptDelay time." DEFVAL { 0 } ::= { hwTrunkIfEntry 33 } hwTrunkSystemPriority OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The priority of the system." ::= { hwTrunkAttr 4 } hwTrunkUnknownUnicastIfModel OBJECT-TYPE SYNTAX INTEGER { packetAll(1), sourceDesMac(2), packetUdp(3), packetTcp(4), sourceDesIp(5), sourceMacIpv6(6), sourceIpIpv6(7), sourceIp(8), desIp(9), sourceMac(10), desMac(11), sourcePort(12), desPort(13), sourceDesPort(14), label(15), ipOrLabel(16) } MAX-ACCESS read-write STATUS current DESCRIPTION "Participated model of load for unknown unicast. sourceDesMac(2) and sourceMac(10) and desMac(11) are Layer2 hash arithmetic." ::= { hwTrunkAttr 5 } hwTrunkETrunkSystemPriority OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The system priority of the E-Trunk." ::= { hwTrunkAttr 6 } hwTrunkETrunkSystemID OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The system ID of the E-Trunk. If set ffff-ffff-ffff the system ID will be to default." ::= { hwTrunkAttr 7 } -- ---------------------------------------------------------------------------- -- Trunk member attribute Group -- ---------------------------------------------------------------------------- hwTrunkMemAttr OBJECT IDENTIFIER ::= { hwIFExtObjects 4 } hwTrunkMemTable OBJECT-TYPE SYNTAX SEQUENCE OF HwTrunkMemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Trunk member attribute information table." ::= { hwTrunkMemAttr 1 } hwTrunkMemEntry OBJECT-TYPE SYNTAX HwTrunkMemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Trunk member attribute information" INDEX { hwTrunkIndex, hwTrunkMemifIndex } ::= { hwTrunkMemTable 1 } HwTrunkMemEntry ::= SEQUENCE { hwTrunkMemifIndex Integer32, hwTrunkValidEntry INTEGER, hwTrunkSelectStatus INTEGER, hwTrunkLacpStatus EnabledStatus, hwTrunkDeleteFlag EnabledStatus, hwTrunkOperstatus INTEGER, hwTrunkIsDefaultLagRecv TruthValue, hwTrunkPortWeight Unsigned32, hwTrunkPortStandby Unsigned32, hwTrunkRowStatus RowStatus, hwTrunkPortMaster INTEGER, hwTrunkPortPriority Integer32, hwTrunkPortStatReset INTEGER } hwTrunkMemifIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Trunk port index" ::= { hwTrunkMemEntry 1 } hwTrunkValidEntry OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Entries of Trunk interface " ::= { hwTrunkMemEntry 2 } hwTrunkSelectStatus OBJECT-TYPE SYNTAX INTEGER { trunkSelected(1), trunkDeselected(2), invalid(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Selected Status of Trunk Port.It is used LACP." ::= { hwTrunkMemEntry 3 } hwTrunkLacpStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-only STATUS current DESCRIPTION "It is status of the LACP." ::= { hwTrunkMemEntry 4 } hwTrunkDeleteFlag OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Flag is set trunk_del_enable(1) or trunk_del_disable(2), according to operation." ::= { hwTrunkMemEntry 5 } hwTrunkOperstatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of operation, indicates port status. There are trunk_up(1) and trunk_down(2).It expresses whether port is shutdown." ::= { hwTrunkMemEntry 6 } hwTrunkIsDefaultLagRecv OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "We don't sustain now, default value is false." ::= { hwTrunkMemEntry 7 } hwTrunkPortWeight OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Port weight, it expresses proportion of port in Trunk interface table" ::= { hwTrunkMemEntry 8 } hwTrunkPortStandby OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value is backup of Trunk Port." ::= { hwTrunkMemEntry 9 } hwTrunkRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Current operation status of the row. " ::= { hwTrunkMemEntry 10 } hwTrunkPortMaster OBJECT-TYPE SYNTAX INTEGER { portSlave(1), portMaster(2), invalid(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Master port of backup-access eth-trunk or not 1: port-slave 2: port-master" ::= { hwTrunkMemEntry 11 } hwTrunkPortPriority OBJECT-TYPE SYNTAX Integer32 (0..65535 | -1) MAX-ACCESS read-create STATUS current DESCRIPTION "The priority value assigned to this Trunk Port. This 16-bit value is read-write." ::= { hwTrunkMemEntry 12 } hwTrunkPortStatReset OBJECT-TYPE SYNTAX INTEGER { reset(1), ready(2), invalid(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Reset the statistic information of LACPDUsRx,MarkerPDUsRx,LACPDUsTx, MarkerResponsePDUsTx for the current port." ::= { hwTrunkMemEntry 13 } -- =========================================================================== -- Global interfacce flow stat interval group -- =========================================================================== hwIFFlowStat OBJECT IDENTIFIER ::= { hwIFExtObjects 5 } -- metric: second hwIFFlowStatGlobalInterval OBJECT-TYPE SYNTAX Integer32 (10..600) MAX-ACCESS read-write STATUS current DESCRIPTION "Global interval of interface flow stat.The interface interval is effective, when both interface interval and global interval are config.Globle interval is only effective in interfaces,which interface interval is not configged. Flow stat rate of interface will be affected by the value of interval. The default value is 300s." ::= { hwIFFlowStat 1 } -- =========================================================================== -- Global interface flow stat interval group -- =========================================================================== hwIfStatistics OBJECT IDENTIFIER ::= { hwIFExtObjects 6 } hwIfEtherStatTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIfEtherStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Ethernet Interface Statistic Table " ::= { hwIfStatistics 1 } hwIfEtherStatEntry OBJECT-TYPE SYNTAX HwIfEtherStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Entry of Ethernet Interface Statistic Table " INDEX { hwIfEtherStatIfIndex } ::= { hwIfEtherStatTable 1 } HwIfEtherStatEntry ::= SEQUENCE { hwIfEtherStatIfIndex InterfaceIndex, hwIfEtherStatInPkts64Octets Counter64, hwIfEtherStatInPkts65to127Octets Counter64, hwIfEtherStatInPkts128to255Octets Counter64, hwIfEtherStatInPkts256to511Octets Counter64, hwIfEtherStatInPkts512to1023Octets Counter64, hwIfEtherStatInPkts1024to1518Octets Counter64, hwIfEtherStatInJumboPkts Counter64, hwIfEtherStatInCRCPkts Counter64, hwIfEtherStatInLongPkts Counter64, hwIfEtherStatInJabberPkts Counter64, hwIfEtherStatInFragmentPkts Counter64, hwIfEtherStatInUnderSizePkts Counter64, hwIfEtherStatInOverRunPkts Counter64, hwIfEtherStatInPausePkts Counter64, hwIfEtherStatOutJumboPkts Counter64, hwIfEtherStatOutOverflowPkts Counter64, hwIfEtherStatOutUnderRunPkts Counter64, hwIfEtherStatOutPausePkts Counter64, hwIfEthIfStatReset INTEGER, hwIfEtherStatInDropEventPkts Counter64, hwIfEtherStatInAlignmentPkts Counter64, hwIfEtherStatInSymbolPkts Counter64, hwIfEtherStatInIgnoredPkts Counter64, hwIfEtherStatInFramePkts Counter64, hwIfEtherStatOutCollisionPkts Counter64, hwIfEtherStatOutDeferredPkts Counter64, hwIfEtherStatOutLateCollisionPkts Counter64, hwIfEtherStatOutExcessiveCollisionPkts Counter64, hwIfEtherStatOutBufferPurgationPkts Counter64 } hwIfEtherStatIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " The index of L2 interface " ::= { hwIfEtherStatEntry 1 } -- 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.5 hwIfEtherStatInPkts64Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of recieved Packets whose size over 1518 bytes " ::= { hwIfEtherStatEntry 5 } -- 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.6 hwIfEtherStatInPkts65to127Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of recieved Packets whose size over 1518 bytes " ::= { hwIfEtherStatEntry 6 } -- 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.7 hwIfEtherStatInPkts128to255Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of recieved Packets whose size over 1518 bytes " ::= { hwIfEtherStatEntry 7 } -- 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.8 hwIfEtherStatInPkts256to511Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of recieved Packets whose size over 1518 bytes " ::= { hwIfEtherStatEntry 8 } -- 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.9 hwIfEtherStatInPkts512to1023Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of recieved Packets whose size over 1518 bytes " ::= { hwIfEtherStatEntry 9 } -- 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.10 hwIfEtherStatInPkts1024to1518Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of recieved Packets whose size over 1518 bytes " ::= { hwIfEtherStatEntry 10 } hwIfEtherStatInJumboPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of recieved Packets whose size over 1518 bytes " ::= { hwIfEtherStatEntry 11 } hwIfEtherStatInCRCPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of recieved Packets which have CRC checking errors " ::= { hwIfEtherStatEntry 12 } hwIfEtherStatInLongPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of recieved Packets whose length is over maximum length " ::= { hwIfEtherStatEntry 13 } hwIfEtherStatInJabberPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of recieved Packets whose length is over maximum length and wrong CRC checking " ::= { hwIfEtherStatEntry 14 } hwIfEtherStatInFragmentPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of recieved Packets which have short size and wrong CRC checking " ::= { hwIfEtherStatEntry 15 } hwIfEtherStatInUnderSizePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of recieved Packets which have short size but right CRC checking " ::= { hwIfEtherStatEntry 16 } hwIfEtherStatInOverRunPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of recieved Packets whose queue overflow " ::= { hwIfEtherStatEntry 17 } hwIfEtherStatInPausePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of recieved control Frames " ::= { hwIfEtherStatEntry 18 } hwIfEtherStatOutJumboPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of sended Packets whose size over 1518 bytes " ::= { hwIfEtherStatEntry 19 } hwIfEtherStatOutOverflowPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of Packets whitch happen FIFO overflow error" ::= { hwIfEtherStatEntry 20 } hwIfEtherStatOutUnderRunPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of Packets whitch happen FIFO empty" ::= { hwIfEtherStatEntry 21 } hwIfEtherStatOutPausePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of sended control Frames " ::= { hwIfEtherStatEntry 22 } hwIfEthIfStatReset OBJECT-TYPE SYNTAX INTEGER { reset(1), ready(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Reset the Statistic information Counter " ::= { hwIfEtherStatEntry 23 } hwIfEtherStatInDropEventPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of recieved Packets discarded for GBP full or back pressure discard " ::= { hwIfEtherStatEntry 24 } hwIfEtherStatInAlignmentPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of recieved Packets which have frame alignment error " ::= { hwIfEtherStatEntry 25 } hwIfEtherStatInSymbolPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of recieved Packets which have unknown symbols " ::= { hwIfEtherStatEntry 26 } hwIfEtherStatInIgnoredPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of recieved MAC control frames which have unknown opecode " ::= { hwIfEtherStatEntry 27 } hwIfEtherStatInFramePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of recieved frames whose actual length differs with 802.3 " ::= { hwIfEtherStatEntry 28 } hwIfEtherStatOutCollisionPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of sended collision Frames(only happen in the 10/100M port with half duplex mode) " ::= { hwIfEtherStatEntry 29 } hwIfEtherStatOutDeferredPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of sended deferred but not collision Frames(only happen in the 10/100M port) " ::= { hwIfEtherStatEntry 30 } hwIfEtherStatOutLateCollisionPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of sended deferred and collision Frames(only happen in the 10/100M port) " ::= { hwIfEtherStatEntry 31 } hwIfEtherStatOutExcessiveCollisionPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of sended failure Frames whose collision more than 16(only happen in the 10/100M port) " ::= { hwIfEtherStatEntry 32 } hwIfEtherStatOutBufferPurgationPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of sended Frames which is purged from the buffer because of long time " ::= { hwIfEtherStatEntry 33 } hwIfSdhStatTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIfSdhStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Sdh/sonet Interface Statistic Table " ::= { hwIfStatistics 2 } hwIfSdhStatEntry OBJECT-TYPE SYNTAX HwIfSdhStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Entry of Sdh/Sonet Interface Statistic Table " INDEX { hwIfSdhStatIfIndex } ::= { hwIfSdhStatTable 1 } HwIfSdhStatEntry ::= SEQUENCE { hwIfSdhStatIfIndex InterfaceIndex, hwIfSdhStatInCRCPkts Counter64, hwIfSdhStatInShortPkts Counter64, hwIfSdhStatInLongPkts Counter64, hwIfSdhStatOutOverRunPkts Counter64, hwIfSdhStatOutUnderRunPkts Counter64, hwIfSdhIfStatReset INTEGER } hwIfSdhStatIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " The index of sdh/sonet interface " ::= { hwIfSdhStatEntry 1 } hwIfSdhStatInCRCPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of recieved Packets which have CRC checking errors " ::= { hwIfSdhStatEntry 2 } hwIfSdhStatInShortPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of recieved Packets whose length is under minimal length " ::= { hwIfSdhStatEntry 3 } hwIfSdhStatInLongPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of recieved Packets whose length is over maximum length " ::= { hwIfSdhStatEntry 4 } hwIfSdhStatOutOverRunPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of sent Packets whose queue overflow " ::= { hwIfSdhStatEntry 5 } hwIfSdhStatOutUnderRunPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of sent Packets whose queue underflow " ::= { hwIfSdhStatEntry 6 } hwIfSdhIfStatReset OBJECT-TYPE SYNTAX INTEGER { reset(1), ready(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Reset the Statistic information Counter " ::= { hwIfSdhStatEntry 7 } hwIfAtmStatTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIfAtmStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Atm Interface Statistic Table " ::= { hwIfStatistics 3 } hwIfAtmStatEntry OBJECT-TYPE SYNTAX HwIfAtmStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Entry of Atm Interface Statistic Table " INDEX { hwIfAtmStatIfIndex } ::= { hwIfAtmStatTable 1 } HwIfAtmStatEntry ::= SEQUENCE { hwIfAtmStatIfIndex InterfaceIndex, hwIfAtmStatInGoodCells Counter64, hwIfAtmStatInIdleCells Counter64, hwIfAtmStatInCorrectedCells Counter64, hwIfAtmStatInUncorrectedCells Counter64, hwIfAtmStatOutGoodCells Counter64, hwIfAtmStatOutIdleCells Counter64, hwIfAtmIfStatReset INTEGER } hwIfAtmStatIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " The index of atm interface " ::= { hwIfAtmStatEntry 1 } hwIfAtmStatInGoodCells OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of good cells recieved " ::= { hwIfAtmStatEntry 2 } hwIfAtmStatInIdleCells OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of idle cells recieved " ::= { hwIfAtmStatEntry 3 } hwIfAtmStatInCorrectedCells OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of recieved cells whitch have been corrected. " ::= { hwIfAtmStatEntry 4 } hwIfAtmStatInUncorrectedCells OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of recieved cells whitch can not be corrected. " ::= { hwIfAtmStatEntry 5 } hwIfAtmStatOutGoodCells OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of good cells sent " ::= { hwIfAtmStatEntry 6 } hwIfAtmStatOutIdleCells OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of idle cells sent " ::= { hwIfAtmStatEntry 7 } hwIfAtmIfStatReset OBJECT-TYPE SYNTAX INTEGER { reset(1), ready(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Reset the Statistic information Counter " ::= { hwIfAtmStatEntry 8 } hwIfMonitorObject OBJECT IDENTIFIER ::= { hwIFExtObjects 7 } hwIfMonitorThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIfMonitorThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Alarm monitor table " ::= { hwIfMonitorObject 1 } hwIfMonitorThresholdEntry OBJECT-TYPE SYNTAX HwIfMonitorThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Entry of alarm monitor table " INDEX { hwIfMonitorIndex } ::= { hwIfMonitorThresholdTable 1 } HwIfMonitorThresholdEntry::= SEQUENCE { hwIfMonitorIndex InterfaceIndex, hwIfMonitorCrcErrorStatistics Counter64, hwIfMonitorCrcErrorThreshold Integer32, hwIfMonitorCrcErrorInterval Integer32, hwIfMonitorSdhErrorStatistics Counter64, hwIfMonitorSdhErrorThreshold Integer32, hwIfMonitorSdhErrorInterval Integer32, hwIfMonitorInputRatePercentage Integer32, hwIfMonitorInputRateThreshold Integer32, hwIfMonitorOutputRatePercentage Integer32, hwIfMonitorOutputRateThreshold Integer32, hwIfMonitorPauseFrameStatistics Counter64, hwIfMonitorPauseFrameThreshold Integer32, hwIfMonitorPauseFrameInterval Integer32, hwIfMonitorDelayValue Integer32, hwIfMonitorDelayThreshold Integer32, hwIfMonitorJitterValue Integer32, hwIfMonitorJitterThreshold Integer32, hwIfMonitorName DisplayString, hwIfMonitorSdhB1ErrorStatistics Counter64, hwIfMonitorSdhB1ErrorThreshold Integer32, hwIfMonitorSdhB1ErrorInterval Integer32, hwIfMonitorSdhB2ErrorStatistics Counter64, hwIfMonitorSdhB2ErrorThreshold Integer32, hwIfMonitorSdhB2ErrorInterval Integer32, hwIfMonitorSymbolErrorStatistics Counter64, hwIfMonitorSymbolErrorThreshold Integer32, hwIfMonitorSymbolErrorInterval Integer32, hwIfMonitorBadBytesErrorStatistics Counter64, hwIfMonitorBadBytesErrorThreshold Integer32, hwIfMonitorBadBytesErrorInterval Integer32 } hwIfMonitorIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " Index of alarm monitor table " ::= { hwIfMonitorThresholdEntry 1 } hwIfMonitorCrcErrorStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Crc error statistics value " ::= { hwIfMonitorThresholdEntry 2 } hwIfMonitorCrcErrorThreshold OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Crc error alarm threshold,default value is 3 and 0 is an invalid value " ::= { hwIfMonitorThresholdEntry 3 } hwIfMonitorCrcErrorInterval OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Crc error alarm interval time(unit is second),default value is 10s and 0 is an invalid value " ::= { hwIfMonitorThresholdEntry 4 } hwIfMonitorSdhErrorStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Sdh error statistics value only for B3" ::= { hwIfMonitorThresholdEntry 5 } hwIfMonitorSdhErrorThreshold OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Sdh error alarm threshold,only for B3,default value is 3 and 0 is an invalid value " ::= { hwIfMonitorThresholdEntry 6 } hwIfMonitorSdhErrorInterval OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Sdh error alarm interval time(unit is second),only for B3,default value is 10s and 0 is an invalid value " ::= { hwIfMonitorThresholdEntry 7 } hwIfMonitorInputRatePercentage OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION " Input rate percentage value " ::= { hwIfMonitorThresholdEntry 8 } hwIfMonitorInputRateThreshold OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION " Input rate alarm threshold,default value is 100 " ::= { hwIfMonitorThresholdEntry 9 } hwIfMonitorOutputRatePercentage OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION " Output rate percentage value " ::= { hwIfMonitorThresholdEntry 10 } hwIfMonitorOutputRateThreshold OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION " Output rate alarm threshold,default value is 100 " ::= { hwIfMonitorThresholdEntry 11 } hwIfMonitorPauseFrameStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Pause frame statistics value " ::= { hwIfMonitorThresholdEntry 12 } hwIfMonitorPauseFrameThreshold OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Pause frame alarm threshold,and 0 is an invalid value " ::= { hwIfMonitorThresholdEntry 13 } hwIfMonitorPauseFrameInterval OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Pause frame alarm interval time(unit is second),and 0 is an invalid value " ::= { hwIfMonitorThresholdEntry 14 } hwIfMonitorDelayValue OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Delay value " ::= { hwIfMonitorThresholdEntry 15 } hwIfMonitorDelayThreshold OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Delay alarm threshold " ::= { hwIfMonitorThresholdEntry 16 } hwIfMonitorJitterValue OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Jitter value " ::= { hwIfMonitorThresholdEntry 17 } hwIfMonitorJitterThreshold OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Jitter alarm threshold " ::= { hwIfMonitorThresholdEntry 18 } hwIfMonitorName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Interface's name of alarm monitor table " ::= { hwIfMonitorThresholdEntry 19 } hwIfMonitorSdhB1ErrorStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Sdh B1 error statistics value" ::= { hwIfMonitorThresholdEntry 20 } hwIfMonitorSdhB1ErrorThreshold OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Sdh B1 error alarm threshold,default value is 3" ::= { hwIfMonitorThresholdEntry 21 } hwIfMonitorSdhB1ErrorInterval OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Sdh B1 error alarm interval time(unit is second),default value is 10s" ::= { hwIfMonitorThresholdEntry 22 } hwIfMonitorSdhB2ErrorStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Sdh B2 error statistics value" ::= { hwIfMonitorThresholdEntry 23 } hwIfMonitorSdhB2ErrorThreshold OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Sdh error B2 alarm threshold,default value is 3" ::= { hwIfMonitorThresholdEntry 24 } hwIfMonitorSdhB2ErrorInterval OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Sdh B2 error alarm interval time(unit is second),default value is 10s" ::= { hwIfMonitorThresholdEntry 25 } hwIfMonitorSymbolErrorStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Symbol error statistics value " ::= { hwIfMonitorThresholdEntry 26 } hwIfMonitorSymbolErrorThreshold OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Symbol error alarm threshold,default value is 3 " ::= { hwIfMonitorThresholdEntry 27 } hwIfMonitorSymbolErrorInterval OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Symbol error alarm interval time(unit is second),default value is 10s" ::= { hwIfMonitorThresholdEntry 28 } -- 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.40 hwIfMonitorBadBytesErrorStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { hwIfMonitorThresholdEntry 40 } -- 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.41 hwIfMonitorBadBytesErrorThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { hwIfMonitorThresholdEntry 41 } -- 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.42 hwIfMonitorBadBytesErrorInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { hwIfMonitorThresholdEntry 42 } hwIfMonitorGeneral OBJECT IDENTIFIER ::= { hwIFExtObjects 8 } hwIfMonitorCrcEnabledStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Enalbe or disable the crc error monitor, and the default value is disable." ::= { hwIfMonitorGeneral 1 } hwIfMonitorSdhEnabledStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Enalbe or disable the sdh error monitor, and the default value is disable." ::= { hwIfMonitorGeneral 2 } hwIfMonitorInputRateEnabledStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Enalbe or disable the input rate monitor, and the default value is disable." ::= { hwIfMonitorGeneral 3} hwIfMonitorOutputRateEnabledStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Enalbe or disable the output rate monitor, and the default value is disable." ::= { hwIfMonitorGeneral 4 } hwIfMonitorHalfDuplexEnabledStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Enalbe or disable the half duplex monitor, and the default value is disable." ::= { hwIfMonitorGeneral 5} hwIfMonitorPauseRisingEnabledStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Enalbe or disable the pause frame rising monitor, and the default value is disable." ::= { hwIfMonitorGeneral 6 } hwIfMonitorPauseContinuingEnabledStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Enalbe or disable the pause frame continuing monitor, and the default value is disable." ::= { hwIfMonitorGeneral 7 } -- 1.3.6.1.4.1.2011.5.25.41.1.8.8 hwifMonitorBadBytesEnabledStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { hwIfMonitorGeneral 8 } hwAdminVrrpMemberIf OBJECT IDENTIFIER ::= { hwIFExtObjects 9 } hwIfFlowChangeTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The time indicates when the interface's flow status changes." ::= { hwAdminVrrpMemberIf 1 } hwAdminVrrpMemberIfTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAdminVrrpMemberIfEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The interface bound to VRRP table." ::= { hwAdminVrrpMemberIf 2 } hwAdminVrrpMemberIfEntry OBJECT-TYPE SYNTAX HwAdminVrrpMemberIfEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Entries of the interface bound to VRRP table." INDEX{ hwAdminVrrpMemberIfIndex } ::= { hwAdminVrrpMemberIfTable 1} HwAdminVrrpMemberIfEntry ::= SEQUENCE { hwAdminVrrpMemberIfIndex InterfaceIndex, hwAdminVrrpVrid Integer32, hwAdminVrrpIfIndex InterfaceIndex, hwAdminVrrpMemberIfFlowStatus INTEGER, hwAdminVrrpMemberIfRowStatus RowStatus } hwAdminVrrpMemberIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The number of the interface." ::= { hwAdminVrrpMemberIfEntry 1 } hwAdminVrrpVrid OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The administrator VRRP vrid." ::= { hwAdminVrrpMemberIfEntry 2 } hwAdminVrrpIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The administrator VRRP's configure interface index." ::= { hwAdminVrrpMemberIfEntry 3 } hwAdminVrrpMemberIfFlowStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS obsolete DESCRIPTION " Current flow status of interface. 1:up 2:down" ::= { hwAdminVrrpMemberIfEntry 4 } hwAdminVrrpMemberIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Current operation status of the row." ::= { hwAdminVrrpMemberIfEntry 5 } hwIfFluxLimit OBJECT IDENTIFIER ::= { hwIFExtObjects 10 } hwIfFluxLimitTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIfFluxLimitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Flux limit table " ::= { hwIfFluxLimit 1 } hwIfFluxLimitEntry OBJECT-TYPE SYNTAX HwIfFluxLimitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Entry of flux limit table " INDEX { hwIfFluxIfIndex,hwIfFluxVlanId } ::= { hwIfFluxLimitTable 1} HwIfFluxLimitEntry ::= SEQUENCE { hwIfFluxIfIndex InterfaceIndex, hwIfFluxVlanId VlanIdOrNone, hwIfFluxDirection HWDirectionType, hwIfFluxLimitType INTEGER, hwIfFluxCir Integer32, hwIfFluxCbs Integer32, hwIfFluxRowStatus RowStatus } hwIfFluxIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface Index, same as ifIndex." ::= { hwIfFluxLimitEntry 1 } hwIfFluxVlanId OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vlan ID. 0 is the default value" ::= { hwIfFluxLimitEntry 2 } hwIfFluxDirection OBJECT-TYPE SYNTAX HWDirectionType MAX-ACCESS read-create STATUS current DESCRIPTION "Limit direction: inbound (1) outbound (2)" ::= { hwIfFluxLimitEntry 3 } hwIfFluxLimitType OBJECT-TYPE SYNTAX INTEGER { broadcastSuppression(1), multicastSuppression(2), unknownUnicastSuppression(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Flux limit type: broadcastSuppression(1),multicastSuppression(2),unknownUnicastSuppression(3)." ::= { hwIfFluxLimitEntry 4 } hwIfFluxCir OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Committed Information Rate. Unit: kbps. software QoS: 8..155000 hardware QoS: 100..10000000" ::= { hwIfFluxLimitEntry 5 } hwIfFluxCbs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Committed Burst Size. Unit: byte software QoS: 1875..19375000 hardware QoS: 64..33554432" ::= { hwIfFluxLimitEntry 6 } hwIfFluxRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus. Three actions are used: active, createAndGo, destroy" ::= { hwIfFluxLimitEntry 7 } hwIfDiffServ OBJECT IDENTIFIER ::= { hwIFExtObjects 11 } hwIfDiffServTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIfDiffServEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table describes the different service mode of interfaces." ::= { hwIfDiffServ 1} hwIfDiffServEntry OBJECT-TYPE SYNTAX HwIfDiffServEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface different service mode attribute configuration." INDEX { hwIfDiffServIndex } ::= {hwIfDiffServTable 1} HwIfDiffServEntry ::= SEQUENCE { hwIfDiffServIndex InterfaceIndex, hwIfDiffServMode INTEGER, hwIfDiffServServiceClass INTEGER, hwIfDiffServColor INTEGER } hwIfDiffServIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " The index of L2 interface. " ::= { hwIfDiffServEntry 1 } hwIfDiffServMode OBJECT-TYPE SYNTAX INTEGER { pipe(1), uniform(2), shortpipe(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Different service mode of the interface binding to a VLL, default is uniform." ::= { hwIfDiffServEntry 2 } hwIfDiffServServiceClass OBJECT-TYPE SYNTAX INTEGER { default(0), be(1), af1(2), af2(3), af3(4), af4(5), ef(6), cs6(7), cs7(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "PHB in the ingress PE, the value must be be,af1,af2,af3,af4,ef,cs6,cs7." ::= { hwIfDiffServEntry 3 } hwIfDiffServColor OBJECT-TYPE SYNTAX INTEGER { default(0), green(1), yellow(2), red(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Remarked color of packet in the ingress PE, the value must be green,yellow,red." ::= { hwIfDiffServEntry 4 } -- =========================================================================== -- ifname 4K VRF -- ============================================================================ hwIfQuery OBJECT IDENTIFIER ::= { hwIFExtObjects 12 } hwIfQueryTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIfQueryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface name table of private MIB." ::= { hwIfQuery 1 } hwIfQueryEntry OBJECT-TYPE SYNTAX HwIfQueryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of private interface name table." INDEX { hwIfName } ::= { hwIfQueryTable 1 } HwIfQueryEntry ::= SEQUENCE { hwIfName OCTET STRING, hwIfIndex InterfaceIndex } hwIfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..47)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the interface.The value of this object must be the interface name assigned by the local device." ::= { hwIfQueryEntry 1 } hwIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the interface. An index uniquely identifies an interface." ::= { hwIfQueryEntry 2 } -- ---------------------------------------------------------------------------- -- Logic interface attribute Group -- ---------------------------------------------------------------------------- hwLogicIfAttrib OBJECT IDENTIFIER ::= { hwIFExtObjects 13 } hwLogicIfTable OBJECT-TYPE SYNTAX SEQUENCE OF HwLogicIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Logic interface table." ::= { hwLogicIfAttrib 1 } hwLogicIfEntry OBJECT-TYPE SYNTAX HwLogicIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Logic interface table." INDEX { hwLogicIfIndex } ::= { hwLogicIfTable 1 } HwLogicIfEntry ::= SEQUENCE { hwLogicIfIndex InterfaceIndexOrZero, hwLogicIfMainIndex InterfaceIndexOrZero, hwLogicIfType INTEGER, hwLogicIfName DisplayString, hwLogicIfParaOne INTEGER , hwLogicIfRowStatus RowStatus } hwLogicIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the interface index. The interface index to be created must be 0. Then the system automatically allocates an interface index." ::= { hwLogicIfEntry 1 } hwLogicIfMainIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the interface index of the main interface to which the sub-interface belongs. For other interfaces, the interface index is 0." ::= { hwLogicIfEntry 11 } hwLogicIfType OBJECT-TYPE SYNTAX INTEGER { ve(1), loopback(2), vlanif(3), subVe(4), subEthTrunk(5), subEthernet(6), subAtm(7), imaGroup(8), subImaGroup(9), subSerial(10), tunnel(11), mpGroup(13), bridgeIf(14), subAtmTrunk(15), dslGroup(16), wlanEss(17), stackPort(18) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the interface type." ::= { hwLogicIfEntry 12 } hwLogicIfName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the interface name. The interface name must be a name without blank spaces and Tab characters." ::= { hwLogicIfEntry 13 } hwLogicIfParaOne OBJECT-TYPE SYNTAX INTEGER { p2p(1), p2mp(2), none(255) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the extended attribute of the logical interface. The extended attribute takes effect only on the ATM sub-interface. The default extended attribute is P2MP. For sub-interfaces of other types, none is returned after the Get operation." ::= { hwLogicIfEntry 14 } hwLogicIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the status of the row." ::= { hwLogicIfEntry 51 } -- ---------------------------------------------------------------------------- -- Logic interface help attribute Group -- ---------------------------------------------------------------------------- hwLogicIfHelpTable OBJECT-TYPE SYNTAX SEQUENCE OF HwLogicIfHelpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Logic interface help table." ::= { hwLogicIfAttrib 2 } hwLogicIfHelpEntry OBJECT-TYPE SYNTAX HwLogicIfHelpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Logic interface help table." INDEX { hwLogicIfhelpType } ::= { hwLogicIfHelpTable 1 } HwLogicIfHelpEntry ::= SEQUENCE { hwLogicIfhelpType INTEGER, hwLogicIfChassisNumber OCTET STRING, hwLogicIfSlotNumber OCTET STRING, hwLogicIfCardNumber OCTET STRING, hwLogicIfMin Integer32, hwLogicIfMax Integer32, hwLogicIfTotal Integer32 } hwLogicIfhelpType OBJECT-TYPE SYNTAX INTEGER { ve(1), ima-Group(8), tunnel(11), mp-group(13), dslGroup(16) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the types of logical interfaces that can be queried." ::= { hwLogicIfHelpEntry 1 } hwLogicIfChassisNumber OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1..2)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ID of the chassis that supports the creation of the specified logical interface." ::= { hwLogicIfHelpEntry 2 } hwLogicIfSlotNumber OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ID of the slot that supports the creation of the specified logical interface." ::= { hwLogicIfHelpEntry 3 } hwLogicIfCardNumber OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1..512)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of the card that supports the creation of the specified logical interface." ::= { hwLogicIfHelpEntry 4 } hwLogicIfMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the minimum port number of the specified logical interface." ::= { hwLogicIfHelpEntry 5 } hwLogicIfMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum port number of the specified logical interface." ::= { hwLogicIfHelpEntry 6 } hwLogicIfTotal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum number of the specified logical interface." ::= { hwLogicIfHelpEntry 7 } -- ---------------------------------------------------------------------------- -- Logic interface dynamic help attribute Group -- ---------------------------------------------------------------------------- hwLogicIfDynamicHelpTable OBJECT-TYPE SYNTAX SEQUENCE OF HwLogicIfDynamicHelpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Logic interface dynamic help table." ::= { hwLogicIfAttrib 3 } hwLogicIfDynamicHelpEntry OBJECT-TYPE SYNTAX HwLogicIfDynamicHelpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Logic interface dynamic help table." INDEX { hwLogicDynamicIfhelpType, hwLogicDynamicIfChassisNumber, hwLogicDynamicIfSlotNumber, hwLogicDynamicIfCardNumber } ::= { hwLogicIfDynamicHelpTable 1 } HwLogicIfDynamicHelpEntry ::= SEQUENCE { hwLogicDynamicIfhelpType INTEGER, hwLogicDynamicIfChassisNumber Integer32, hwLogicDynamicIfSlotNumber Integer32, hwLogicDynamicIfCardNumber Integer32, hwLogicDynamicIfMin Integer32, hwLogicDynamicIfMax Integer32, hwLogicDynamicIfTotal Integer32 } hwLogicDynamicIfhelpType OBJECT-TYPE SYNTAX INTEGER { ve(1), ima-Group(8), tunnel(11), mp-group(13), dslGroup(16) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the types of logical interfaces that can be queried." ::= { hwLogicIfDynamicHelpEntry 1 } hwLogicDynamicIfChassisNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ID of the chassis that that can be queried." ::= { hwLogicIfDynamicHelpEntry 2 } hwLogicDynamicIfSlotNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ID of the slot that can be queried." ::= { hwLogicIfDynamicHelpEntry 3 } hwLogicDynamicIfCardNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ID of the card that can be queried." ::= { hwLogicIfDynamicHelpEntry 4 } hwLogicDynamicIfMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the minimum port number of the specified logical interface." ::= { hwLogicIfDynamicHelpEntry 5 } hwLogicDynamicIfMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum port number of the specified logical interface." ::= { hwLogicIfDynamicHelpEntry 6 } hwLogicDynamicIfTotal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum number of the specified logical interface." ::= { hwLogicIfDynamicHelpEntry 7 } -- ============================================================================ -- cpu packet statistic table -- ============================================================================ hwCppsObjects OBJECT IDENTIFIER ::= { hwIFExtObjects 14 } hwCppsGlobalEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Whether statistic function is enabled globally, and the default value is disable." ::= { hwCppsObjects 1 } -- ======================= Cpps interface table ========================= hwCppsInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF HwCppsInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "CPU packet and byte statistic interface configuration table." ::= { hwCppsObjects 2 } hwCppsInterfaceEntry OBJECT-TYPE SYNTAX HwCppsInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of hwCppsInterfaceTable." INDEX { hwCppsInterfaceIndex } ::= { hwCppsInterfaceTable 1} HwCppsInterfaceEntry ::= SEQUENCE { hwCppsInterfaceIndex InterfaceIndex , hwCppsPortPvcEnable EnabledStatus , hwCppsPortVlanEnable EnabledStatus } hwCppsInterfaceIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index number of the interface." ::= { hwCppsInterfaceEntry 1 } hwCppsPortPvcEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Whether statistic function is enabled on PVC." DEFVAL { disable } ::= { hwCppsInterfaceEntry 2 } hwCppsPortVlanEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Whether statistic function is enabled on VLAN." DEFVAL { disable } ::= { hwCppsInterfaceEntry 3 } -- ======================= Cpps interface statistics table ========================= hwCppsIfStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF HwCppsIfStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "CPU packet and byte statistic interface table." ::= { hwCppsObjects 3 } hwCppsIfStatisticsEntry OBJECT-TYPE SYNTAX HwCppsIfStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of hwCppsIfStatisticsTable." INDEX { hwCppsIfStatisticsIndex } ::= { hwCppsIfStatisticsTable 1} HwCppsIfStatisticsEntry ::= SEQUENCE { hwCppsIfStatisticsIndex InterfaceIndex , hwCppsInterfacePktStatisic Counter64 , hwCppsInterfaceByteStatisic Counter64 , hwCppsResetInterfaceStatisic INTEGER } hwCppsIfStatisticsIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index number of the interface." ::= { hwCppsIfStatisticsEntry 1 } hwCppsInterfacePktStatisic OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packet statistic information of the interface sent to CPU." ::= { hwCppsIfStatisticsEntry 2 } hwCppsInterfaceByteStatisic OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Byte statistic information of the interface sent to CPU." ::= { hwCppsIfStatisticsEntry 3 } hwCppsResetInterfaceStatisic OBJECT-TYPE SYNTAX INTEGER{ reset(1), unreset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Whether to reset statistics." DEFVAL { 2 } ::= { hwCppsIfStatisticsEntry 4 } -- ======================= Cpps ATM+pvc table ========================= hwCppsAtmPvcTable OBJECT-TYPE SYNTAX SEQUENCE OF HwCppsAtmPvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "CPU packet and byte statistic ATM PVC table." ::= { hwCppsObjects 4 } hwCppsAtmPvcEntry OBJECT-TYPE SYNTAX HwCppsAtmPvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of hwCppsAtmPvcTable." INDEX { hwCppsAtmIfIndex, hwCppsAtmVpi, hwCppsAtmVci } ::= { hwCppsAtmPvcTable 1} HwCppsAtmPvcEntry ::= SEQUENCE { hwCppsAtmIfIndex InterfaceIndex , hwCppsAtmVpi AtmVpIdentifier , hwCppsAtmVci AtmVcIdentifier , hwCppsAtmPvcPktStatisic Counter64 , hwCppsAtmPvcByteStatisic Counter64 , hwCppsResetAtmPvcStatisic INTEGER } hwCppsAtmIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index number of the interface." ::= { hwCppsAtmPvcEntry 1 } hwCppsAtmVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI." ::= { hwCppsAtmPvcEntry 2 } hwCppsAtmVci OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI." ::= { hwCppsAtmPvcEntry 3 } hwCppsAtmPvcPktStatisic OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packet statistic information of the PVC sent to CPU." ::= { hwCppsAtmPvcEntry 4 } hwCppsAtmPvcByteStatisic OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Byte statistic information of the PVC sent to CPU." ::= { hwCppsAtmPvcEntry 5 } hwCppsResetAtmPvcStatisic OBJECT-TYPE SYNTAX INTEGER{ reset(1), unreset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Whether to reset statistics." DEFVAL { 2 } ::= { hwCppsAtmPvcEntry 6 } -- ======================= Cpps port+vlan table ========================= hwCppsPortVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF HwCppsPortVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "CPU packet and byte statistic port VLAN table." ::= { hwCppsObjects 5 } hwCppsPortVlanEntry OBJECT-TYPE SYNTAX HwCppsPortVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of hwCppsPortVlanTable." INDEX { hwCppsPortIndex, hwCppsVlanId } ::= { hwCppsPortVlanTable 1} HwCppsPortVlanEntry ::= SEQUENCE { hwCppsPortIndex InterfaceIndex , hwCppsVlanId VlanIdOrNone , hwCppsPortVlanPktStatisic Counter64 , hwCppsPortVlanByteStatisic Counter64 , hwCppsResetPortVlanStatisic INTEGER } hwCppsPortIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index number of the interface." ::= { hwCppsPortVlanEntry 1 } hwCppsVlanId OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN ID." ::= { hwCppsPortVlanEntry 2 } hwCppsPortVlanPktStatisic OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packet statistic information of the port sent to CPU." ::= { hwCppsPortVlanEntry 3 } hwCppsPortVlanByteStatisic OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Byte statistic information of the port sent to CPU." ::= { hwCppsPortVlanEntry 4 } hwCppsResetPortVlanStatisic OBJECT-TYPE SYNTAX INTEGER{ reset(1), unreset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Whether to reset statistics." DEFVAL { 2 } ::= { hwCppsPortVlanEntry 5 } -- ---------------------------------------------------------------------------- -- PortIsolation Group -- ---------------------------------------------------------------------------- hwPortIsolationGroupAttrib OBJECT IDENTIFIER ::= { hwIFExtObjects 15 } hwPortIsolationGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPortIsolationGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Logic interface table." ::= { hwPortIsolationGroupAttrib 1 } hwPortIsolationGroupEntry OBJECT-TYPE SYNTAX HwPortIsolationGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Logic interface table." INDEX { hwPortIsolationGroupIndex } ::= { hwPortIsolationGroupTable 1 } HwPortIsolationGroupEntry ::= SEQUENCE { hwPortIsolationGroupIndex Integer32 (0..63), hwPortIsolationGroupPortList PortList, hwPortIsolationGroupRowStatus RowStatus } hwPortIsolationGroupIndex OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "ID of Port-Isolation-Group." ::= { hwPortIsolationGroupEntry 1 } hwPortIsolationGroupPortList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-create STATUS current DESCRIPTION "PortList of Port-Isolation-Group." ::= { hwPortIsolationGroupEntry 2 } hwPortIsolationGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the status of the row." ::= { hwPortIsolationGroupEntry 3 } -- ============================================================================ -- interface vtrunk attribute group -- ============================================================================ hwVTrunkAttr OBJECT IDENTIFIER ::= { hwIFExtObjects 16 } hwVTrunkIfTable OBJECT-TYPE SYNTAX SEQUENCE OF HwVTrunkIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vtrunk table." ::= { hwVTrunkAttr 1 } hwVTrunkIfEntry OBJECT-TYPE SYNTAX HwVTrunkIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of the vtrunk table." INDEX { hwVTrunkIfIndex } ::= { hwVTrunkIfTable 1 } HwVTrunkIfEntry ::= SEQUENCE { hwVTrunkIfIndex InterfaceIndex, hwVTrunkIfID Integer32, hwVTrunkIfType INTEGER, hwVTrunkIfRowStatus RowStatus } hwVTrunkIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " The IfIndex of the VTrunk interface." ::= { hwVTrunkIfEntry 1 } hwVTrunkIfID OBJECT-TYPE SYNTAX Integer32(0..511) MAX-ACCESS read-create STATUS current DESCRIPTION " The identification of the VTrunk interface.It may identify VTrunk and is an index of the interface." ::= { hwVTrunkIfEntry 2 } hwVTrunkIfType OBJECT-TYPE SYNTAX INTEGER { pos-Trunk(1), cpos-Trunk(2), atm-Trunk(3), atm-bundle(4) } MAX-ACCESS read-create STATUS current DESCRIPTION " The type of the VTrunk interface includes pos-Trunk, cpos-Trunk, atm-trunk and atm-bundle." ::= { hwVTrunkIfEntry 3 } hwVTrunkIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Current operation status of the row." ::= { hwVTrunkIfEntry 50 } -- ---------------------------------------------------------------------------- -- VTrunk member attribute Group -- ---------------------------------------------------------------------------- hwVTrunkMemAttr OBJECT IDENTIFIER ::= { hwIFExtObjects 17 } hwVTrunkMemTable OBJECT-TYPE SYNTAX SEQUENCE OF HwVTrunkMemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VTrunk member attribute information table." ::= { hwVTrunkMemAttr 1 } hwVTrunkMemEntry OBJECT-TYPE SYNTAX HwVTrunkMemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VTrunk member attribute information." INDEX { hwVTrunkMemIfIndex } ::= { hwVTrunkMemTable 1 } HwVTrunkMemEntry ::= SEQUENCE { hwVTrunkMemIfIndex Integer32, hwVTrunkIfnetIndex Integer32, hwVTrunkValidEntry INTEGER, hwVTrunkOperstatus INTEGER, hwVTrunkPortActive INTEGER, hwVTrunkRowStatus RowStatus } hwVTrunkMemIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "VTrunk port index." ::= { hwVTrunkMemEntry 1 } hwVTrunkIfnetIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The IfnetIndex of the VTrunk interface." ::= { hwVTrunkMemEntry 2 } hwVTrunkValidEntry OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Entries of VTrunk interface." ::= { hwVTrunkMemEntry 3 } hwVTrunkOperstatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of operation, indicates port status. There are vtrunk_up(1) and vtrunk_down(2).It expresses whether port is shutdown." ::= { hwVTrunkMemEntry 4 } hwVTrunkPortActive OBJECT-TYPE SYNTAX INTEGER { portInactive(1), portActive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Active port of backup-access vtrunk or not 1: portInactive 2: portActive." ::= { hwVTrunkMemEntry 5 } hwVTrunkRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Current operation status of the row. " ::= { hwVTrunkMemEntry 50 } -- ---------------------------------------------------------------------------- -- SubInterfaceBackupTrunk attribute Group -- ---------------------------------------------------------------------------- hwMasterBackupTrunkSubinterfaceAttr OBJECT IDENTIFIER ::= { hwIFExtObjects 18 } hwMasterBackupTrunkSubinterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMasterBackupTrunkSubinterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Master-Backup Trunk Subinterface attribute information table." ::= { hwMasterBackupTrunkSubinterfaceAttr 1 } hwMasterBackupTrunkSubinterfaceEntry OBJECT-TYPE SYNTAX HwMasterBackupTrunkSubinterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Master-Backup Trunk Subinterface attribute information." INDEX { hwBackupTrunkIfIndex } ::= { hwMasterBackupTrunkSubinterfaceTable 1 } HwMasterBackupTrunkSubinterfaceEntry ::= SEQUENCE { hwBackupTrunkIfIndex InterfaceIndex, hwBackupStatus INTEGER, hwRevertiveMode INTEGER, hwWtrTime Integer32, hwFlushVlanId VlanIdOrNone } hwBackupTrunkIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates index of master/backup trunk sub-interface." ::= { hwMasterBackupTrunkSubinterfaceEntry 1 } hwBackupStatus OBJECT-TYPE SYNTAX INTEGER { init(1), master(2), backup(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object identifies backupStatus of master/backup trunk sub-interface." ::= { hwMasterBackupTrunkSubinterfaceEntry 2 } hwRevertiveMode OBJECT-TYPE SYNTAX INTEGER { revertive(1), non-revertive(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies revertive-mode of master/backup trunk sub-interface." DEFVAL { revertive } ::= { hwMasterBackupTrunkSubinterfaceEntry 3 } hwWtrTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the wait-to-restore time of master/backup trunk sub-interface." DEFVAL { 0 } ::= { hwMasterBackupTrunkSubinterfaceEntry 4 } hwFlushVlanId OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates VLAN ID carried in a FlushPDU." DEFVAL { 0 } ::= { hwMasterBackupTrunkSubinterfaceEntry 5 } hwVaspPort OBJECT IDENTIFIER ::= { hwIFExtObjects 19 } hwVaspPortPeerMacTable OBJECT-TYPE SYNTAX SEQUENCE OF HwVaspPortPeerMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vasp port peer MAC table." ::= { hwVaspPort 1 } hwVaspPortPeerMacEntry OBJECT-TYPE SYNTAX HwVaspPortPeerMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vasp port peer MAC table entry." INDEX { hwVaspPortIfIndex } ::= { hwVaspPortPeerMacTable 1 } HwVaspPortPeerMacEntry ::= SEQUENCE { hwVaspPortIfIndex InterfaceIndex, hwVaspPortName DisplayString, hwVaspPortPeerMac PhysAddress } hwVaspPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of interface." ::= { hwVaspPortPeerMacEntry 1 } hwVaspPortName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of vasp port." ::= { hwVaspPortPeerMacEntry 2 } hwVaspPortPeerMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The peer MAC of port." ::= { hwVaspPortPeerMacEntry 3 } hwIFExtTrapObjects OBJECT IDENTIFIER ::= { hwIFExtObjects 20 } hwLinkDownReason OBJECT-TYPE SYNTAX INTEGER { physicalLinkDown(1), -- interface phycial link down lacpNegotiationFailed(2), -- LACP negotiation failed receiveConfReqPacket(3), -- receive ConfReq packet receiveConfAckPacket(4), -- receive ConfAck packet receiveNakPacket(5), -- receive Nak packet receiveTermPacket(6), -- receive Term packet receiveTermAckPacket(7), -- receive TermAck packet receiveCodeRejPacket(8), -- receive CodeRej packet receiveProtoRejPacket(9), -- receive ProtoRej packet chapAuthenticationFailed(10), -- CHAP authentication failed papAuthenticationFailed(11), -- PAP authentication failed keepaliveOutOfTime(12), -- Keepalive out of time pvcDown(13), -- PVC down efmSessionFailed(14), -- EFM session failed tunnelDownOrInexist(15), -- tunnel down or tunnel not exist admindown(16), -- shutdown protocoldown(17), -- protocol down adminup(18), -- undo shutdown protocolup(19), -- protocol up mainifdown(20), -- main interface down physicalLinkIsUp(21), -- Interface physical link is Up conditionsForActivationNotMet(22), -- The conditions for the activation of the interface are not met conditionsForActivationAreMet(23), -- The conditions for the activation of the interface are met tunnelIsUp(24), -- The tunnel is Up interfaceIsDeleted(25), -- The interface is deleted bfdSessionDown(26), -- bfd session is down bfdSessionUp(27), -- bfd session is up efmSessionUp(28), -- efm session is up portAlarmDown(29), -- port alarm down dldpIsDown(30), -- dldp down dldpIsUp(31), -- dldp up vrrpFlowDown(32), -- vrrp flow down vrrpFlowUp(33) -- vrrp flow up } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The reason code of link changes." ::= { hwIFExtTrapObjects 1 } hwMainIfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The main interface name." ::= { hwIFExtTrapObjects 2 } hwCfmOverPhysicalName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The configuration of the interface board or interface card is restored." ::= { hwIFExtTrapObjects 3 } -- ============================================================================ hwIFExtConformance OBJECT IDENTIFIER ::= { hwIFExtMib 2 } hwIFExtGroups OBJECT IDENTIFIER ::= { hwIFExtConformance 1 } -- hwIFExtTraps OBJECT IDENTIFIER ::= { hwIFExtMib 2 } -- hwIFExtConformance OBJECT IDENTIFIER ::= { hwIFExtMib 3 } -- hwIFExtCompliances OBJECT IDENTIFIER ::= { hwIFExtConformance 1 } -- ============================================================================ hwTrunkIfGroup OBJECT-GROUP OBJECTS { hwIFExtPhyStatus, hwIFExtMemberOf, hwTrunkIfMax, hwTrunkNextIndex, hwTrunkIndex, hwTrunkIfID, hwTrunkIfType, hwTrunkIfIndex, hwTrunkIfModel, hwTrunkIfBandWidthAffectLinkNum, hwTrunkIfMinLinkNum, hwTrunkIfRowStatus, hwTrunkIfWorkingMode, hwTrunkIfWorkingState, hwTrunkIfAutoRecover, hwTrunkIfPreemptEnable, hwTrunkIfPreemptDelay, hwTrunkIfTimeoutReceive, hwTrunkBandwidth, hwTrunkIfFlushSendEnable, hwTrunkIfFlushVlanId, hwTrunkIfFlushPasswd, hwTrunkIfForceSwitchEnable, hwTrunkIfStatReset, hwTrunkIfLagSelectedPortStd, hwTrunkIfLagMaxActiveLinkNum, hwTrunkETrunkPriority, hwTrunkETrunkSysID,hwTrunkETrunkPriorityReset, hwTrunkETrunkSysIDReset,hwTrunkLocalPrefMode, hwTrunkIfTrackVrrpVrid, hwTrunkIfTrackVrrpIfIndex, hwTrunkIfTrackVrrpReset } STATUS current DESCRIPTION "A collection of objects indicating information of IP address of interface, contain IP address, IP address mask and IP address acquiring method." ::= { hwIFExtGroups 1 } hwIfIpAddressGroup OBJECT-GROUP OBJECTS { hwIpAdEntAddr, hwIpAdEntIfIndex, hwIpAdEntNetMask, hwIpAdEntBcastAddr, hwIpAdEntReasmMaxSize, hwIpAdEntAddressType, hwIfIpMethod, hwIpAdEntAddrStatus } STATUS current DESCRIPTION "A collection of objects indicating attribute of the Trunk interface." ::= { hwIFExtGroups 2 } -- hwIFExtHoldTime , hwIFExtGroup OBJECT-GROUP OBJECTS { hwIFExtLayer, hwIFExtFrameType, hwIFExtFlowStatInterval, hwIFExtFlushReceiveEnable, hwIFExtFlushVlanId, hwIFExtFlushPasswd, hwTrunkSystemPriority, hwTrunkUnknownUnicastIfModel, hwTrunkETrunkSystemPriority, hwTrunkETrunkSystemID, hwIFExtFlowStatus, hwIFExtMtu,hwIFExtMacAddr, hwIFExtBlockPriority, hwIFExtMacShift,hwIFExtSuppressStatus} STATUS current DESCRIPTION "A collection of objects indicating attribute of interface extended." ::= { hwIFExtGroups 3 } hwTrunkMemGroup OBJECT-GROUP OBJECTS { hwTrunkMemifIndex, hwTrunkValidEntry, hwTrunkSelectStatus, hwTrunkLacpStatus, hwTrunkDeleteFlag, hwTrunkOperstatus, hwTrunkIsDefaultLagRecv, hwTrunkPortWeight, hwTrunkPortStandby, hwTrunkPortMaster, hwTrunkPortPriority, hwTrunkPortStatReset, hwTrunkRowStatus } STATUS current DESCRIPTION "Trunk member attribute Group, now only can set hwTrunkPortWeight and hwTrunkPortStandby. hwTrunkSelectStatus and hwTrunkDeleteFlag can't be set. These attributes are for extend." ::= { hwIFExtGroups 4 } hwIFFlowStatGroup OBJECT-GROUP OBJECTS { hwIFFlowStatGlobalInterval } STATUS current DESCRIPTION "A collection of objects indicating interval time of interface flow stat." ::= { hwIFExtGroups 5 } hwAdminVrrpMemberIfGroup OBJECT-GROUP OBJECTS { hwIfFlowChangeTime, hwAdminVrrpVrid, hwAdminVrrpIfIndex, hwAdminVrrpMemberIfFlowStatus, hwAdminVrrpMemberIfRowStatus } STATUS obsolete DESCRIPTION "A collection of objects indicating attribute of the interface track administrator VRRP." ::= { hwIFExtGroups 6 } hwIfEtherStatGroup OBJECT-GROUP OBJECTS { hwIfEtherStatInPkts64Octets, hwIfEtherStatInPkts65to127Octets, hwIfEtherStatInPkts128to255Octets, hwIfEtherStatInPkts256to511Octets, hwIfEtherStatInPkts512to1023Octets, hwIfEtherStatInPkts1024to1518Octets, hwIfEtherStatInJumboPkts, hwIfEtherStatInCRCPkts, hwIfEtherStatInLongPkts, hwIfEtherStatInJabberPkts, hwIfEtherStatInFragmentPkts, hwIfEtherStatInUnderSizePkts, hwIfEtherStatInOverRunPkts, hwIfEtherStatInPausePkts, hwIfEtherStatOutJumboPkts, hwIfEtherStatOutOverflowPkts, hwIfEtherStatOutUnderRunPkts, hwIfEtherStatOutPausePkts, hwIfEthIfStatReset, hwIfEtherStatInDropEventPkts, hwIfEtherStatInAlignmentPkts, hwIfEtherStatInSymbolPkts, hwIfEtherStatInIgnoredPkts, hwIfEtherStatInFramePkts, hwIfEtherStatOutCollisionPkts, hwIfEtherStatOutDeferredPkts, hwIfEtherStatOutLateCollisionPkts, hwIfEtherStatOutExcessiveCollisionPkts, hwIfEtherStatOutBufferPurgationPkts } STATUS current DESCRIPTION "Interface statistic Group." ::= { hwIFExtGroups 7 } hwIFExtCompliances OBJECT IDENTIFIER ::= { hwIFExtConformance 2 } hwIfMonitorThresholdGroup OBJECT-GROUP OBJECTS{ hwIfMonitorCrcErrorStatistics , hwIfMonitorCrcErrorThreshold , hwIfMonitorCrcErrorInterval , hwIfMonitorSdhErrorStatistics , hwIfMonitorSdhErrorThreshold , hwIfMonitorSdhErrorInterval , hwIfMonitorInputRatePercentage , hwIfMonitorInputRateThreshold , hwIfMonitorOutputRatePercentage , hwIfMonitorOutputRateThreshold, hwIfMonitorPauseFrameStatistics, hwIfMonitorPauseFrameThreshold, hwIfMonitorPauseFrameInterval, hwIfMonitorDelayValue, hwIfMonitorDelayThreshold, hwIfMonitorJitterValue, hwIfMonitorJitterThreshold, hwIfMonitorSdhB1ErrorStatistics, hwIfMonitorSdhB1ErrorThreshold, hwIfMonitorSdhB1ErrorInterval, hwIfMonitorSdhB2ErrorStatistics, hwIfMonitorSdhB2ErrorThreshold, hwIfMonitorSdhB2ErrorInterval, hwIfMonitorSymbolErrorStatistics, hwIfMonitorSymbolErrorThreshold, hwIfMonitorSymbolErrorInterval, hwIfMonitorBadBytesErrorStatistics, hwIfMonitorBadBytesErrorThreshold, hwIfMonitorBadBytesErrorInterval } STATUS current DESCRIPTION "Alarm Monitor Group." ::= { hwIFExtGroups 8 } hwIfMonitorGeneralGroup OBJECT-GROUP OBJECTS{ hwIfMonitorCrcEnabledStatus , hwIfMonitorSdhEnabledStatus , hwIfMonitorInputRateEnabledStatus , hwIfMonitorOutputRateEnabledStatus , hwIfMonitorHalfDuplexEnabledStatus, hwIfMonitorPauseRisingEnabledStatus, hwIfMonitorPauseContinuingEnabledStatus, hwifMonitorBadBytesEnabledStatus } STATUS current DESCRIPTION "Alarm Monitor Enable Group." ::= { hwIFExtGroups 9 } hwIfFluxLimitGroup OBJECT-GROUP OBJECTS{ hwIfFluxDirection , hwIfFluxLimitType , hwIfFluxCir, hwIfFluxCbs, hwIfFluxRowStatus } STATUS current DESCRIPTION "Flux limit Group." ::= { hwIFExtGroups 10 } hwIfDiffServGroup OBJECT-GROUP OBJECTS{ hwIfDiffServMode, hwIfDiffServServiceClass, hwIfDiffServColor } STATUS current DESCRIPTION "Interface statistic Group." ::= { hwIFExtGroups 11 } hwIfQueryGroup OBJECT-GROUP OBJECTS{ hwIfIndex } STATUS current DESCRIPTION "Interface name Group." ::= { hwIFExtGroups 12 } hwLogicIfAttrGroup OBJECT-GROUP OBJECTS{ hwLogicIfMainIndex, hwLogicIfType, hwLogicIfName, hwLogicIfParaOne, hwLogicIfRowStatus } STATUS current DESCRIPTION "Logic interface table Group." ::= { hwIFExtGroups 13 } hwIfIpUnnumberedGroup OBJECT-GROUP OBJECTS{ hwLendIfIndex, hwLendIpAddr, hwLendIpAddrNetMask, hwUnnumberedRowStatus } STATUS current DESCRIPTION "Logic interface table Group." ::= { hwIFExtGroups 14 } hwLinkModeChangeAutoCreateIfGroup OBJECT-GROUP OBJECTS{ hwNewIfTimeslot } STATUS current DESCRIPTION "Interface time slot Group." ::= { hwIFExtGroups 15 } hwCppsGlobalEnableGroup OBJECT-GROUP OBJECTS { hwCppsGlobalEnable } STATUS current DESCRIPTION "A collection of objects indicating global CPU packet statistic function." ::= { hwIFExtGroups 16 } hwCppsInterfaceGroup OBJECT-GROUP OBJECTS { hwCppsPortPvcEnable , hwCppsPortVlanEnable } STATUS current DESCRIPTION "A collection of objects providing interface configuration function." ::= { hwIFExtGroups 17 } hwCppsIfStatisticsGroup OBJECT-GROUP OBJECTS { hwCppsInterfacePktStatisic , hwCppsInterfaceByteStatisic , hwCppsResetInterfaceStatisic } STATUS current DESCRIPTION "A collection of objects providing packet and byte statistic of the interface sent to CPU." ::= { hwIFExtGroups 18 } hwCppsAtmPvcGroup OBJECT-GROUP OBJECTS { hwCppsAtmPvcPktStatisic , hwCppsAtmPvcByteStatisic , hwCppsResetAtmPvcStatisic } STATUS current DESCRIPTION "A collection of objects providing packet and byte statistic for the pvc sent to CPU." ::= { hwIFExtGroups 19 } hwCppsPortVlanGroup OBJECT-GROUP OBJECTS { hwCppsPortVlanPktStatisic , hwCppsPortVlanByteStatisic , hwCppsResetPortVlanStatisic } STATUS current DESCRIPTION "A collection of objects providing packet and byte statistic for the port sent to CPU." ::= { hwIFExtGroups 20 } hwPortIsolationGroup OBJECT-GROUP OBJECTS { hwPortIsolationGroupPortList , hwPortIsolationGroupRowStatus } STATUS current DESCRIPTION "Port Isolation Group." ::= { hwIFExtGroups 21 } hwVTrunkIfGroup OBJECT-GROUP OBJECTS { hwVTrunkIfIndex, hwVTrunkIfID, hwVTrunkIfType, hwVTrunkIfRowStatus } STATUS current DESCRIPTION "VTrunk attribute Group." ::= { hwIFExtGroups 22 } hwVTrunkMemGroup OBJECT-GROUP OBJECTS { hwVTrunkMemIfIndex, hwVTrunkValidEntry, hwVTrunkOperstatus, hwVTrunkPortActive, hwVTrunkRowStatus } STATUS current DESCRIPTION "VTrunk member attribute Group." ::= { hwIFExtGroups 23 } hwLogicIfHelpTableGroup OBJECT-GROUP OBJECTS{ hwLogicIfhelpType, hwLogicIfChassisNumber, hwLogicIfSlotNumber, hwLogicIfCardNumber, hwLogicIfMin, hwLogicIfMax, hwLogicIfTotal } STATUS current DESCRIPTION "Logic interface help table Group." ::= { hwIFExtGroups 24 } hwSubInterfaceBackupTrunkGroup OBJECT-GROUP OBJECTS { hwBackupStatus, hwRevertiveMode, hwWtrTime, hwFlushVlanId } STATUS current DESCRIPTION "SubInterfaceBackupTrunk attribute Group." ::= { hwIFExtGroups 25 } hwVaspPortGroup OBJECT-GROUP OBJECTS { hwVaspPortName, hwVaspPortPeerMac } STATUS current DESCRIPTION "The vasp port group." ::= { hwIFExtGroups 26 } hwLogicIfDynamicHelpTableGroup OBJECT-GROUP OBJECTS{ hwLogicDynamicIfhelpType, hwLogicDynamicIfChassisNumber, hwLogicDynamicIfSlotNumber, hwLogicDynamicIfCardNumber, hwLogicDynamicIfMin, hwLogicDynamicIfMax, hwLogicDynamicIfTotal } STATUS current DESCRIPTION "Logic interface Dynamic help table Group." ::= { hwIFExtGroups 27 } -- ---------------------------------------------------------------------------- -- compliance statements -- ---------------------------------------------------------------------------- hwIFExtCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities implementing Huawei extended interface management MIB." MODULE -- this module MANDATORY-GROUPS { hwTrunkIfGroup, hwIfIpAddressGroup, hwIFExtGroup, hwTrunkMemGroup, hwIFFlowStatGroup, hwIfQueryGroup,hwLogicIfAttrGroup, hwVTrunkIfGroup, hwVTrunkMemGroup } ::= { hwIFExtCompliances 1 } hwIFExtTraps OBJECT IDENTIFIER ::= { hwIFExtMib 3 } hwTrunkWorkingSwitch NOTIFICATION-TYPE OBJECTS { hwTrunkIfID, hwTrunkIfWorkingState } STATUS current DESCRIPTION "hwTrunkWorkingSwitch. 1.hwTrunkIfID: The identification of the Trunk interface; 2.hwTrunkIfWorkingState: Current working state of backup-access trunk. Index: hwTrunkIndex." ::= { hwIFExtTraps 1 } hwLacpNegotiateFailed NOTIFICATION-TYPE OBJECTS { hwTrunkIfID, ifName, ifName } STATUS current DESCRIPTION "The member of LAG neither can take over PDU nor transmit PDUs. Send this trap when LACP protocol negotiation fails. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is the name of the trunk in the ifXTable of IF-MIB. 3.ifName: It is the name of the port in the ifXTable of IF-MIB. Indexes: 1.hwTrunkIndex; 2.ifIndex. " ::= { hwIFExtTraps 2 } hwLacpTotalLinkLoss NOTIFICATION-TYPE OBJECTS { hwTrunkIfID, ifName } STATUS current DESCRIPTION "Total loss of link bandwidth: it means that there is no member in the LAG group and the trap of MNCD(Member not Collecting/Distributing) occurs. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is in the ifXTable of IF-MIB. Index: hwTrunkIndex." ::= { hwIFExtTraps 3 } hwLacpPartialLinkLoss NOTIFICATION-TYPE OBJECTS { hwTrunkIfID, ifName } STATUS current DESCRIPTION "Part loss of link bandwidth: it means that some members in the LAG group aren't in the working-state, making the number of ports in working-state smaller than the hwTrunkIfMinLinkNum. The trap of PLL(Partial Link Loss) will be restrained by the trap of TLL(Total Link Loss). 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is in the ifXTable of IF-MIB. Index: hwTrunkIndex." ::= { hwIFExtTraps 4 } hwIfFlowDown NOTIFICATION-TYPE OBJECTS { sysUpTime, hwIFExtFlowStatus,ifName } STATUS current DESCRIPTION "This notification indicates the time when the interface's flow status changes to flow down,and the reason." ::= {hwIFExtTraps 5} hwIfFlowUp NOTIFICATION-TYPE OBJECTS { sysUpTime, hwIFExtFlowStatus,ifName } STATUS current DESCRIPTION "This notification indicates the time when the interface's flow status changes to flow up,and the reason." ::= {hwIFExtTraps 6} hwIfNameChange NOTIFICATION-TYPE STATUS current DESCRIPTION "When a single-chassis device is upgraded to a multi-chassis device, the interface information is changed and then the system sends a trap." ::= {hwIFExtTraps 7} hwIfNameChangeResume NOTIFICATION-TYPE STATUS current DESCRIPTION "When a multi-chassis restore a single-chassis device, the interface information is changed and then the system sends a trap." ::= {hwIFExtTraps 8} hwExtLinkDown NOTIFICATION-TYPE OBJECTS { ifIndex, ifAdminStatus, ifOperStatus, ifDescr, hwIFExtPhyStatus, hwIFExtMemberOf } STATUS deprecated DESCRIPTION "This notification indicates the time when the member interface link status changes to down.The ifDescr indicates the name of the member interface,the hwIFExtMemberOf indicates the name of main interface." ::= {hwIFExtTraps 9} hwExtLinkUp NOTIFICATION-TYPE OBJECTS { ifIndex, ifAdminStatus, ifOperStatus, ifDescr, hwIFExtPhyStatus, hwIFExtMemberOf } STATUS deprecated DESCRIPTION "This notification indicates the time when the member interface link status changes to up.The ifDescr indicates the name of the member interface,the hwIFExtMemberOf indicates the name of main interface." ::= {hwIFExtTraps 10} hwLoopbackBlock NOTIFICATION-TYPE OBJECTS { hwIfName } STATUS current DESCRIPTION "This notification indicates block state of the interface." ::= {hwIFExtTraps 11} hwLoopbackResume NOTIFICATION-TYPE OBJECTS { hwIfName } STATUS current DESCRIPTION "This notification indicates normal state of the interface." ::= {hwIFExtTraps 12} hwLacpNegotiateResume NOTIFICATION-TYPE OBJECTS { hwTrunkIfID, ifName, ifName } STATUS current DESCRIPTION "Negotiation failure alarm is resumed. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is the name of the trunk in the ifXTable of IF-MIB. 3.ifName: It is the name of the port in the ifXTable of IF-MIB. Indexes: 1.hwTrunkIndex; 2.ifIndex. " ::= { hwIFExtTraps 13 } hwLacpTotalLinkLossResume NOTIFICATION-TYPE OBJECTS { hwTrunkIfID, ifName } STATUS current DESCRIPTION "Link bandwidth lost totally is resumed. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is in the ifXTable of IF-MIB. Index: hwTrunkIndex." ::= { hwIFExtTraps 14 } hwLacpPartialLinkLossResume NOTIFICATION-TYPE OBJECTS { hwTrunkIfID, ifName } STATUS current DESCRIPTION "Link bandwidth lost partly is resumed. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is in the ifXTable of IF-MIB. Index: hwTrunkIndex." ::= { hwIFExtTraps 15 } hwTrunkSubIfStateToMaster NOTIFICATION-TYPE OBJECTS { hwIfName, hwBackupStatus } STATUS current DESCRIPTION "This notification indicates BackupState of the Trunk subinterface. 1.hwIfName: The identification of the Trunk subinterface; 2.hwBackupStatus: Current working state of Trunk subinterface." ::= { hwIFExtTraps 24 } hwTrunkSubIfStateToSlave NOTIFICATION-TYPE OBJECTS { hwIfName, hwBackupStatus } STATUS current DESCRIPTION "This notification indicates BackupState of the Trunk subinterface. 1.hwIfName: The identification of the Trunk subinterface; 2.hwBackupStatus: Current working state of Trunk subinterface." ::= { hwIFExtTraps 25 } hwEntityExtCfmOverSlot NOTIFICATION-TYPE OBJECTS { hwCfmOverPhysicalName } STATUS current DESCRIPTION "The hwEntityExtCfmOverSlot notification will be displayed when the configuration of an interface board is restored. The object hwCfmOverPhysicalName idicates the name of the interface board." ::= { hwIFExtTraps 26 } hwEntityExtCfmOverCard NOTIFICATION-TYPE OBJECTS { hwCfmOverPhysicalName } STATUS current DESCRIPTION "The hwEntityExtCfmOverCard notification will be displayed when the configuration of an interface card is restored. The object hwCfmOverPhysicalName idicates the name of the interface card." ::= { hwIFExtTraps 27 } hwExtAllMemberDownNotify NOTIFICATION-TYPE OBJECTS { ifName } STATUS current DESCRIPTION "This notification indicates the time when the last member interface link status changes to down. The ifName indicates the name of the Trunk interface." ::= { hwIFExtTraps 28 } hwExtAllMemberDownResume NOTIFICATION-TYPE OBJECTS { ifName } STATUS current DESCRIPTION "This notification indicates the time when the first member interface link status changes to up. The ifName indicates the name of the Trunk interface." ::= { hwIFExtTraps 29 } hwIfControlFlapSuppress NOTIFICATION-TYPE OBJECTS { ifName, hwIFExtSuppressStatus } STATUS current DESCRIPTION " This notification indicates the time when the interface's status changes from unsuppress to suppress. " ::= { hwIFExtTraps 31 } hwIfControlFlapResume NOTIFICATION-TYPE OBJECTS { ifName, hwIFExtSuppressStatus } STATUS current DESCRIPTION " This notification indicates the time when the interface's status changes from suppress to unsuppress. " ::= { hwIFExtTraps 32 } hwExtInterfaceDelete NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr} STATUS current DESCRIPTION " This notification indicates the time when the interface was deleted. " ::= { hwIFExtTraps 33 } hwMonitorNotifications OBJECT IDENTIFIER ::= { hwIFExtMib 4 } hwIfMonitorCrcErrorRising NOTIFICATION-TYPE OBJECTS { hwIfMonitorCrcErrorStatistics, hwIfMonitorCrcErrorThreshold, hwIfMonitorCrcErrorInterval, hwIfMonitorName } STATUS current DESCRIPTION " Crc error alarm notification " ::= { hwMonitorNotifications 1 } hwIfMonitorCrcErrorResume NOTIFICATION-TYPE OBJECTS { hwIfMonitorCrcErrorStatistics, hwIfMonitorCrcErrorThreshold, hwIfMonitorCrcErrorInterval, hwIfMonitorName } STATUS current DESCRIPTION " Crc error alarm resume " ::= { hwMonitorNotifications 2 } hwIfMonitorSdhErrorRising NOTIFICATION-TYPE OBJECTS { hwIfMonitorSdhErrorStatistics, hwIfMonitorSdhErrorThreshold , hwIfMonitorSdhErrorInterval, hwIfMonitorName } STATUS current DESCRIPTION " Sdh error alarm notification only for B3" ::= { hwMonitorNotifications 3 } hwIfMonitorSdhErrorResume NOTIFICATION-TYPE OBJECTS { hwIfMonitorSdhErrorStatistics, hwIfMonitorSdhErrorThreshold , hwIfMonitorSdhErrorInterval, hwIfMonitorName } STATUS current DESCRIPTION " Sdh error alarm resume only for B3" ::= { hwMonitorNotifications 4 } hwIfMonitorInputRateRising NOTIFICATION-TYPE OBJECTS { hwIfMonitorInputRatePercentage, hwIfMonitorInputRateThreshold, hwIfMonitorName } STATUS current DESCRIPTION " Input rate alarm notification " ::= { hwMonitorNotifications 5 } hwIfMonitorInputRateResume NOTIFICATION-TYPE OBJECTS { hwIfMonitorInputRatePercentage, hwIfMonitorInputRateThreshold, hwIfMonitorName } STATUS current DESCRIPTION " Input rate alarm resume " ::= { hwMonitorNotifications 6} hwIfMonitorOutputRateRising NOTIFICATION-TYPE OBJECTS { hwIfMonitorOutputRatePercentage, hwIfMonitorOutputRateThreshold, hwIfMonitorName } STATUS current DESCRIPTION " Output rate alarm notification " ::= { hwMonitorNotifications 7} hwIfMonitorOutputRateResume NOTIFICATION-TYPE OBJECTS { hwIfMonitorOutputRatePercentage, hwIfMonitorOutputRateThreshold, hwIfMonitorName } STATUS current DESCRIPTION " Output rate alarm resume " ::= { hwMonitorNotifications 8 } hwIfMonitorHalfDuplexRising NOTIFICATION-TYPE OBJECTS { ifDescr } STATUS current DESCRIPTION " Interface half duplex alarm norification " ::= { hwMonitorNotifications 9 } hwIfMonitorPauseFrameRising NOTIFICATION-TYPE OBJECTS { hwIfMonitorPauseFrameStatistics, hwIfMonitorPauseFrameThreshold, hwIfMonitorPauseFrameInterval } STATUS current DESCRIPTION " Pause frame alarm notification " ::= { hwMonitorNotifications 10 } hwIfMonitorPauseFrameRisingResume NOTIFICATION-TYPE OBJECTS { hwIfMonitorPauseFrameStatistics, hwIfMonitorPauseFrameThreshold, hwIfMonitorPauseFrameInterval } STATUS current DESCRIPTION " Pause frame alarm resume " ::= { hwMonitorNotifications 11 } hwIfPortControlUp NOTIFICATION-TYPE OBJECTS { ifName } STATUS current DESCRIPTION " Control Up alarm notification " ::= { hwMonitorNotifications 12 } hwIfPortControlDown NOTIFICATION-TYPE OBJECTS { ifName } STATUS current DESCRIPTION " Control Down alarm notification " ::= { hwMonitorNotifications 13 } hwIfMonitorSdhB1ErrorRising NOTIFICATION-TYPE OBJECTS { hwIfMonitorSdhB1ErrorStatistics, hwIfMonitorSdhB1ErrorThreshold , hwIfMonitorSdhB1ErrorInterval, hwIfMonitorName } STATUS current DESCRIPTION " Sdh B1 error alarm notification " ::= { hwMonitorNotifications 14 } hwIfMonitorSdhB1ErrorResume NOTIFICATION-TYPE OBJECTS { hwIfMonitorSdhB1ErrorStatistics, hwIfMonitorSdhB1ErrorThreshold , hwIfMonitorSdhB1ErrorInterval, hwIfMonitorName } STATUS current DESCRIPTION " Sdh B1 error alarm resume" ::= { hwMonitorNotifications 15 } hwIfMonitorSdhB2ErrorRising NOTIFICATION-TYPE OBJECTS { hwIfMonitorSdhB2ErrorStatistics, hwIfMonitorSdhB2ErrorThreshold , hwIfMonitorSdhB2ErrorInterval, hwIfMonitorName } STATUS current DESCRIPTION " Sdh B2 error alarm notification " ::= { hwMonitorNotifications 16 } hwIfMonitorSdhB2ErrorResume NOTIFICATION-TYPE OBJECTS { hwIfMonitorSdhB2ErrorStatistics, hwIfMonitorSdhB2ErrorThreshold , hwIfMonitorSdhB2ErrorInterval, hwIfMonitorName } STATUS current DESCRIPTION " Sdh B2 error alarm resume" ::= { hwMonitorNotifications 17 } hwIfMonitorSymbolErrorRising NOTIFICATION-TYPE OBJECTS { hwIfMonitorSymbolErrorStatistics, hwIfMonitorSymbolErrorThreshold, hwIfMonitorSymbolErrorInterval, hwIfMonitorName } STATUS current DESCRIPTION " Symbol error alarm notification " ::= { hwMonitorNotifications 18 } hwIfMonitorSymbolErrorResume NOTIFICATION-TYPE OBJECTS { hwIfMonitorSymbolErrorStatistics, hwIfMonitorSymbolErrorThreshold, hwIfMonitorSymbolErrorInterval, hwIfMonitorName } STATUS current DESCRIPTION " Crc error alarm resume " ::= { hwMonitorNotifications 19 } -- 1.3.6.1.4.1.2011.5.25.41.4.40 hwIfMonitorBadBytesErrorRising NOTIFICATION-TYPE OBJECTS { hwIfMonitorBadBytesErrorStatistics, hwIfMonitorBadBytesErrorThreshold, hwIfMonitorBadBytesErrorInterval } STATUS current DESCRIPTION "Description." ::= { hwMonitorNotifications 40 } -- 1.3.6.1.4.1.2011.5.25.41.4.41 hwIfMonitorBadBytesErrorResume NOTIFICATION-TYPE OBJECTS { hwIfMonitorBadBytesErrorStatistics, hwIfMonitorBadBytesErrorThreshold, hwIfMonitorBadBytesErrorInterval } STATUS current DESCRIPTION "Description." ::= { hwMonitorNotifications 41 } hwIFExtTrapConformance OBJECT IDENTIFIER ::= { hwIFExtMib 5 } hwIFExtTrapGroups OBJECT IDENTIFIER ::= { hwIFExtTrapConformance 1 } hwIFExtTrapGroup NOTIFICATION-GROUP NOTIFICATIONS { hwTrunkWorkingSwitch, hwLacpNegotiateFailed, hwLacpTotalLinkLoss, hwLacpPartialLinkLoss,hwIfFlowDown, hwIfFlowUp, hwIfNameChange, hwIfNameChangeResume, hwExtLinkDown, hwExtLinkUp, hwLoopbackBlock, hwLoopbackResume, hwLacpNegotiateResume,hwLacpTotalLinkLossResume,hwLacpPartialLinkLossResume, hwExtAllMemberDownNotify, hwExtAllMemberDownResume, hwIfControlFlapSuppress,hwIfControlFlapResume,hwExtInterfaceDelete} STATUS current DESCRIPTION "IF Trap Group." ::= { hwIFExtTrapGroups 1 } hwMonitorTrapGroup NOTIFICATION-GROUP NOTIFICATIONS { hwIfMonitorCrcErrorRising , hwIfMonitorCrcErrorResume , hwIfMonitorSdhErrorRising , hwIfMonitorSdhErrorResume , hwIfMonitorInputRateRising , hwIfMonitorInputRateResume , hwIfMonitorOutputRateRising , hwIfMonitorOutputRateResume , hwIfMonitorHalfDuplexRising, hwIfMonitorPauseFrameRising, hwIfMonitorPauseFrameRisingResume, hwIfPortControlUp, hwIfPortControlDown, hwIfMonitorSdhB1ErrorRising, hwIfMonitorSdhB1ErrorResume, hwIfMonitorSdhB2ErrorRising, hwIfMonitorSdhB2ErrorResume, hwIfMonitorSymbolErrorRising, hwIfMonitorSymbolErrorResume, hwIfMonitorBadBytesErrorRising, hwIfMonitorBadBytesErrorResume } STATUS current DESCRIPTION "Monitor Trap Group." ::= { hwIFExtTrapGroups 2 } --add trap for IP address changed hwIFIpNotifications OBJECT IDENTIFIER ::= { hwIFExtMib 6 } hwIfIpAddressChange NOTIFICATION-TYPE OBJECTS { ipAdEntNetMask,ipAdEntNetMask,ifName } STATUS current DESCRIPTION "IP Trap Group. The trap will be generated when the primary IP address of an interface changes." ::= { hwIFIpNotifications 1 } END -- -- HUAWEI-IF-EXT-MIB.my --