x/compass-core
Code Issues Proposed changes
master
compass-core/mibs/HUAWEI-ETHOAM-MIB.mib

7469 lines
282 KiB
Plaintext
Raw Permalink Blame History

-- =================================================================
-- Copyright (C) 2010 by HUAWEI TECHNOLOGIES. All rights reserved.
--
-- Description: HUAWEI-ETHOAM-MIB
-- Reference:
-- Version: V1.07
-- History:
-- Revision history
-- REVISION "201207030000Z"
-- DESCRIPTION "V1.07, add hwY1731OneDelayPacketSize, hwY1731TwoDelayPacketSize"
-- REVISION "2012050240000Z"
-- DESCRIPTION "V1.07, add hwY1731LckDefect, hwY1731LckDefectCleared"
-- REVISION "201202080000Z"
-- DESCRIPTION "V1.07, add hwY1731TwoDelayUnresponsivePacketCount leaf node for HK-GAN y1731 statistics"
-- REVISION "201201300000Z"
-- DESCRIPTION "V1.06, add hwDot3ahEfmInterval leaf node for efm interval configuration"
-- REVISION "201109090000Z"
-- DESCRIPTION "V1.05, add hwY1731AisExceedMaxPktNumCleared leaf node for AIS"
-- REVISION "201109090000Z"
-- DESCRIPTION "V1.05, add hwY1731AisMaxPktNum leaf node for AIS"
-- REVISION "201109090000Z"
-- DESCRIPTION "V1.05, add hwY1731AisExceedMaxPktNum leaf node for AIS"
-- REVISION "201109050000Z"
-- DESCRIPTION "V1.05, add hwY1731SingleLossLocalMax, hwY1731SingleLossLocalMin, hwY1731SingleLossLocalAvg,
-- hwY1731SingleLossRemoteMax, hwY1731SingleLossRemoteMin, hwY1731SingleLossRemoteAvg,
-- hwY1731OneDelayStatisticMax, hwY1731OneDelayStatisticMin, hwY1731OneDelayStatisticAvg,
-- hwY1731TwoDelayStatisticMax, hwY1731TwoDelayStatisticMin, hwY1731TwoDelayStatisticAvg"
-- REVISION "201105230000Z"
-- DESCRIPTION "V1.05, add hwDot1agCfmMdFormatName, hwDot1agCfmMaFormat, hwDot1agCfmMaFormatName for new 1ag MD/MA format support"
-- REVISION "201105110000Z"
-- DESCRIPTION "V1.05, add hwDot1agCfmUnexpectedMEGLevel,
-- hwDot1agCfmUnexpectedMEGLevelCleared, hwDot1agCfmMismerge, hwDot1agCfmMismergeCleared,
-- hwDot1agCfmUnexpectedMEP, hwDot1agCfmUnexpectedMEPCleared, hwDot1agCfmUnexpectedPeriod,
-- hwDot1agCfmUnexpectedPeriodCleared, hwDot1agCfmUnexpectedMAC, hwDot1agCfmUnexpectedMACCleared,
-- hwDot1agCfmLOC, hwDot1agCfmLOCCleared, hwDot1agCfmExceptionalMACStatusfor new 1ag traps support"
-- REVISION "201104210000Z"
-- DESCRIPTION "V1.05, add hwY1731AisVlanConfigTable table for ais vlan configuration"
-- REVISION "201103230000Z"
-- DESCRIPTION "V1.05, add hwDot3ahEfmLoopbackFailed, hwY1731AisDefectAlarm, hwY1731AisDefectAlarmRecovery trap node for PTN6900"
-- REVISION "201102130000Z"
-- DESCRIPTION "V1.04, add hwDot3ahEfmHoldUpTime leaf node for efm holdup timer configuration"
-- REVISION "201012040000Z"
-- DESCRIPTION "V1.03, add hwY1731ResetStatistic8021pValue leaf nodes for Y1731 COS
-- statistic configuration"
-- REVISION "201011120000Z"
-- DESCRIPTION "V1.02, add hwY1731SingleLossRecv8021pValue and hwY1731OneDelayRecv8021pValue,hwY1731TwoDelayRecv8021pValue
-- leaf nodes for Y1731 COS statistic configuration"
-- REVISION "201011010000Z"
-- DESCRIPTION "V1.01, add hwDot3ahEfmTimeout leaf node for efm timeout configuration"
-- ==================================================================
HUAWEI-ETHOAM-MIB DEFINITIONS ::= BEGIN
IMPORTS
CounterBasedGauge64
FROM HCNUM-TC
hwDatacomm
FROM HUAWEI-MIB
ifIndex, InterfaceIndex, InterfaceIndexOrZero, ifDescr
FROM IF-MIB
EnabledStatus
FROM P-BRIDGE-MIB
VlanIdOrNone
FROM Q-BRIDGE-MIB
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
FROM SNMPv2-CONF
Integer32, Unsigned32, Counter32, BITS, OBJECT-TYPE, IpAddress,
MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
MacAddress, TruthValue, RowStatus, TimeInterval, TimeStamp,
TEXTUAL-CONVENTION
FROM SNMPv2-TC;
hwEthOamMib MODULE-IDENTITY
LAST-UPDATED "200911020000Z" -- November 02, 2009 at 00:00 GMT
ORGANIZATION
"Huawei Technologies Co., Ltd.
"
CONTACT-INFO
"
R&D BeiJing, Huawei Technologies co.,Ltd.
Huawei Bld.,NO.3 Xinxi Rd.,
Shang-Di Information Industry Base,
Hai-Dian District Beijing P.R. China
Zip:100085
Http://www.huawei.com
E-mail:support@huawei.com
"
DESCRIPTION
"Ethernet OAM MIB"
::= { hwEthOam 1 }
--
-- Textual conventions
--
HWDetectType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
Detect the mode type:
Fast detect and standard detect
"
SYNTAX INTEGER
{
normalDetect(1),
fastDetect(2)
}
-- Textual conventions for OAM MIB
--
HWDot3Oui ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"24-bit Organizationally Unique Identifier. Information on
OUIs can be found in IEEE 802-2001 [802-2001] Clause 9."
SYNTAX OCTET STRING (SIZE (3))
HWTestMessageSendSpeed ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
Transmission rate:
1Mbps and 5Mbps.
"
SYNTAX INTEGER
{
oneMbps(1),
fiveMbps(2)
}
HWTestMessageFinishedValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
The five values indicates: has not run/is running/the previous test terminates normally/the previous test terminates abnormally/the previous test is interrupted (through ctrl+c or mib)
"
REFERENCE
" "
SYNTAX INTEGER
{
ready(1),
testing(2),
finished(3),
failed(4),
stop(5)
}
-- RFC2863
HWDot1agCfmRelayActionFieldValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the possible values the Relay action field can take."
REFERENCE
"802.1ag clauses 12.14.7.5.3 g), 20.32.2.5, and Table 21-24"
SYNTAX INTEGER
{
rlyHit(1),
rlyFdb(2),
rlyMpdb(3),
rlyInvalid(255)
}
HWDot1agCfmIngressActionFieldValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Possible values returned in the ingress action field."
REFERENCE
"802.1ag clauses 12.14.7.5.3 k), 21.9.9.1, 20.35.2.6 and
Table 21-26.
"
SYNTAX INTEGER
{
ingOk(1),
ingDown(2),
ingBlocked(3),
ingVid(4),
ingInvalid(255)
}
HWDot1agCfmEgressActionFieldValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Possible values returned in the egress action field"
REFERENCE
"802.1ag clauses 12.14.7.5.3 o), 21.9.10.1 and Table 21-28"
SYNTAX INTEGER
{
egrOK(1),
egrDown(2),
egrBlocked(3),
egrVid(4),
egrInvalid(255)
}
HWDot1agCfmHighestDefectPri ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value, equal to the contents of the variable
highestDefect (20.33.9 and Table 20-1), indicating the
highest-priority defect that has been present since the MEP
Fault Notification Generator State Machine was last in the
FNG_RESET state, either:
none(0) no defects since FNG_RESET
defRDICCM(1) DefRDICCM
defMACstatus(2) DefMACstatus
defRemoteCCM(3) DefRemoteCCM
defErrorCCM(4) DefErrorCCM
defXconCCM(5) DefXconCCM
The value 0 is used for no defects so that additional higher
priority values can be added, if needed, at a later time, and
so that these values correspond with those in
Dot1agCfmLowestAlarmPri.
"
REFERENCE
"20.1.2, 12.14.7.7.2:c and 20.33.9"
SYNTAX INTEGER
{
none (0),
defRDICCM (1),
defMACstatus (2),
defRemoteCCM (3),
defErrorCCM (4),
defXconCCM (5)
}
HWDot1agCfmMDLevel ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"Integer identifying the Maintenance Domain Level (MD Level).
Higher numbers correspond to higher Maintenance Domains,
those with the greatest physical reach, with the highest
values for customers' CFM PDUs. Lower numbers correspond
to lower Maintenance Domains, those with more limited
physical reach, with the lowest values for CFM PDUs
protecting single bridges or physical links.
"
REFERENCE
"802.1ag clauses 18.3, 21.4.1"
SYNTAX Integer32 (0..7)
--
-- Node definitions
--
hwEthOam OBJECT IDENTIFIER ::= { hwDatacomm 136 }
hwEthOam1ag OBJECT IDENTIFIER ::= { hwEthOamMib 1 }
hwDot1agCfmEnabled OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object indicates whether CFM is enabled globally.
The value of this object can be:
Enabled: indicates that CFM is enabled globally.
Disabled: indicates that global CFM is disabled
"
::= { hwEthOam1ag 1 }
hwDot1agCfmVersion OBJECT-TYPE
SYNTAX INTEGER
{
draft7(1),
standard(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object indicates the supported CFM version.
The value of this object can be:
draft: indicates IEEE 802.1ag Draft 7.
standard: indicates IEEE Standard 802.1ag-2007.
"
::= { hwEthOam1ag 2 }
hwDot1agCfmMdObject OBJECT IDENTIFIER ::= { hwEthOam1ag 3 }
hwDot1agCfmMdTableNextIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The index to the Maintenance Domain table.
hwDot1agCfmMdTableNextIndex needs to be inspected to find an
available index for row-creation.
"
::= { hwDot1agCfmMdObject 1 }
hwDot1agCfmMdTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDot1agCfmMdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table is used to create a Maintenance Domain (MD).
A Maintenance Domain is described in 802.1ag (3.22) as the
network or the part of the network for which faults in
connectivity are to be managed. The boundary of a Maintenance
Domain is defined by a set of DSAPs, each of which can become
a point of connectivity to a service instance.
"
REFERENCE
"802.1ag clause 3.16 and 18.2"
::= { hwDot1agCfmMdObject 2 }
hwDot1agCfmMdEntry OBJECT-TYPE
SYNTAX HwDot1agCfmMdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The Maintenance Domain table entry. This entry is not lost
upon reboot. It is backed up by stable storage.
"
INDEX { hwDot1agCfmMdIndex }
::= { hwDot1agCfmMdTable 1 }
HwDot1agCfmMdEntry ::=
SEQUENCE {
hwDot1agCfmMdIndex
Unsigned32,
hwDot1agCfmMdFormat
INTEGER,
hwDot1agCfmMdName
OCTET STRING,
hwDot1agCfmMdMdLevel
HWDot1agCfmMDLevel,
hwDot1agCfmMdMhfCreation
INTEGER,
hwDot1agCfmMdMhfIdPermission
INTEGER,
hwDot1agCfmMdFormatName
OCTET STRING,
hwDot1agCfmMdRowStatus
RowStatus
}
hwDot1agCfmMdIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This object indicates the index of the MD Table.
hwDot1agCfmMdTableNextIndex needs to be inspected to find an
available index for row-creation.
"
::= { hwDot1agCfmMdEntry 1 }
hwDot1agCfmMdFormat OBJECT-TYPE
SYNTAX INTEGER
{
no-md-name(1),
dns(2),
macAddress(3),
string(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the format of the MD name.
By default, the value is string.
"
DEFVAL { string }
::= { hwDot1agCfmMdEntry 2 }
hwDot1agCfmMdName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..43))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the name of the MD.
The type/format of this object is determined by the value
of the hwDot1agCfmMdFormat object.
Each Maintenance Domain has unique name amongst all those
used or available to a service provider or operator. It
facilitates easy identification of administrative
responsibility for each Maintenance Domain.
"
::= { hwDot1agCfmMdEntry 3 }
hwDot1agCfmMdMdLevel OBJECT-TYPE
SYNTAX HWDot1agCfmMDLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the level of the MD.
The value ranges from 0 to 7. The greater the value, the higher the preference.
By default, the value is 0.
"
DEFVAL { 0 }
::= { hwDot1agCfmMdEntry 4 }
hwDot1agCfmMdMhfCreation OBJECT-TYPE
SYNTAX INTEGER
{
defMHFnone(1),
defMHFdefault(2),
defMHFexplicit(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates whether the management entity can create MIPs for the MD.
The value of this object can be:
defMHFnone: indicates that the MIPs are not automatically created.
defMHFdefault: indicates that the management entity automatically
creates MIPs based on certain rules.
defMHFexplicit: indicates that the management entity automatically
creates MIPs based on certain rules.
By default, the value is defMHFnone.
"
DEFVAL { defMHFnone }
::= { hwDot1agCfmMdEntry 5 }
hwDot1agCfmMdMhfIdPermission OBJECT-TYPE
SYNTAX INTEGER
{
sendIdNone(1),
sendIdChassis(2),
sendIdManage(3),
sendIdChassisManage(4),
sendIdDefer(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates what is to be included in the Sender ID TLV
transmitted by MPs configured in the MD. The value of this object
can be:
sendIdNone: indicates that the Sender ID TLV is not to be sent.
sendIdChassis: indicates that the Sender ID TLV to be sent contains
the chassis ID information.
sendIdManage: indicates that the Sender ID TLV to be sent contains
management address information.
sendIdChassisManage: indicates that the Sender ID TLV to be sent
contains both chassis ID information and
management address information.
sendIdDefer: indicates that the contents of the Sender ID TLV to be
sent are determined by the MD management entity.
By default, the value is sendIdDefer.
"
DEFVAL { sendIdDefer }
::= { hwDot1agCfmMdEntry 6 }
hwDot1agCfmMdFormatName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..43))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the MD format name.
The type/format of this object is determined by the value
of the hwDot1agCfmMdFormatName object.
Each Maintenance Domain has unique name amongst all those
used or available to a service provider or operator. It
facilitates easy identification of administrative
responsibility for each Maintenance Domain.
"
::= { hwDot1agCfmMdEntry 7 }
hwDot1agCfmMdRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the row status of this table.
The writable columns in a row can not be changed if the row
is active. All columns MUST have a valid value before a row
can be activated.
"
::= { hwDot1agCfmMdEntry 99 }
hwDot1agCfmMaObject OBJECT IDENTIFIER ::= { hwEthOam1ag 4 }
hwDot1agCfmMaNextIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Value to be used as the index of the MA table entries.
"
::= { hwDot1agCfmMaObject 1 }
hwDot1agCfmMaTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDot1agCfmMaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table is used to create a Maintenance Association (MA).
Each row in the table represents an MA.
An MA is a set of MEPs, each configured with a single service instance.
"
REFERENCE
"802.1ag clause 3.16 and 18.2"
::= { hwDot1agCfmMaObject 2 }
hwDot1agCfmMaEntry OBJECT-TYPE
SYNTAX HwDot1agCfmMaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MA table entry."
INDEX { hwDot1agCfmMdIndex, hwDot1agCfmMaIndex }
::= { hwDot1agCfmMaTable 1 }
HwDot1agCfmMaEntry ::=
SEQUENCE {
hwDot1agCfmMaIndex
Unsigned32,
hwDot1agCfmMaName
OCTET STRING,
hwDot1agCfmMaMapType
INTEGER,
hwDot1agCfmMaMapVlanValue
VlanIdOrNone,
hwDot1agCfmMaMapVsiName
OCTET STRING,
hwDot1agCfmMaMapL2vcValue
Unsigned32,
hwDot1agCfmMaMapL2vcType
INTEGER,
hwDot1agCfmMaPktPriority
Integer32,
hwDot1agCfmMaCcmInterval
INTEGER,
hwDot1agCfmMaRmepActiveTime
Integer32,
hwDot1agCfmMaMepFngAlarmTime
Integer32,
hwDot1agCfmMaMepFngResetTime
Integer32,
hwDot1agCfmMaFormat
INTEGER,
hwDot1agCfmMaFormatName
OCTET STRING,
hwDot1agCfmMaRowStatus
RowStatus
}
hwDot1agCfmMaIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This object indicates the index of the MA table.
"
::= { hwDot1agCfmMaEntry 1 }
hwDot1agCfmMaName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..43))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the name of the MA.
This name MUST be unique within a maintenance domain.
"
::= { hwDot1agCfmMaEntry 2 }
hwDot1agCfmMaMapType OBJECT-TYPE
SYNTAX INTEGER
{
mapVlan(1),
mapVsi(2),
mapL2vc(3),
unbind(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates what is associated with the MA.
The value of this object can be:
mapVlan: indicates that a VLAN is associated with the current MA.
mapVsi: indicates that a VSI is associated with the current MA.
mapL2vc: indicates that an L2VC is associated with the current MA.
unbind: indicates that the MA is not associated with any VLAN, VSI or L2VC.
By default, the value is unbind.
"
DEFVAL { unbind }
::= { hwDot1agCfmMaEntry 3 }
hwDot1agCfmMaMapVlanValue OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the ID of the VLAN associated with the MA."
::= { hwDot1agCfmMaEntry 4 }
hwDot1agCfmMaMapVsiName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the name of the VSI associated with the MA."
::= { hwDot1agCfmMaEntry 5 }
hwDot1agCfmMaMapL2vcValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the ID of the L2VC associated with the MA.
"
::= { hwDot1agCfmMaEntry 6 }
hwDot1agCfmMaMapL2vcType OBJECT-TYPE
SYNTAX INTEGER
{
invalid(1),
l2vcRaw(2),
l2vcTagged(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the encapsulation type of the L2VC associated with the MA.
The value of this object can be:
invalid: indicates that no display shows that the L2VC is associated
with the current MA.
l2vcRaw: indicates that the VLAN tag is not encapsulated into the packet.
l2vcTagged: indicates that the VLAN tag is encapsulated into the packet.
By default, the value is invalid.
"
DEFVAL { invalid }
::= { hwDot1agCfmMaEntry 7 }
hwDot1agCfmMaPktPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the priority of the 802.1ag packet sent in the MA.
The value ranges from 0 to 7. The greater the value is, the higher the priority is.
By default, the value is 7.
"
REFERENCE
"802.1ag clause 12.14.6.1.4"
DEFVAL { 7 }
::= { hwDot1agCfmMaEntry 8 }
hwDot1agCfmMaCcmInterval OBJECT-TYPE
SYNTAX INTEGER
{
interval10ms(1),
interval20ms(2),
interval30ms(3),
interval50ms(4),
interval100ms(5),
interval1s(6),
interval10s(7),
interval3Dot3ms(8),
interval1min(9),
interval10min(10)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the interval for an MEP in the MA to send
or probe CCMs. The value of this object can be:
3.3 milliseconds
10 milliseconds
20 milliseconds
30 milliseconds
50 milliseconds
100 milliseconds
1 second
10 seconds
1 minute
10 minutes
By default, the value is 1 second.
"
REFERENCE
"802.1ag clause 12.14.6.1.3"
DEFVAL { interval1s }
::= { hwDot1agCfmMaEntry 9 }
hwDot1agCfmMaRmepActiveTime OBJECT-TYPE
SYNTAX Integer32 (0..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the time period after which RMEP configurations
are to be activated. The value ranges from 0 to 600 in seconds.
By default, the value is 0.
"
DEFVAL { 0 }
::= { hwDot1agCfmMaEntry 10 }
hwDot1agCfmMaMepFngAlarmTime OBJECT-TYPE
SYNTAX Integer32 (0..30000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the delay for the RMEP to send trap messages.
The value must be an integer multiple of 500, for example, 500, 1000,
or 1500.
The value ranges from 0 to 30000 in milliseconds.
By default, the value is 2500.
"
DEFVAL { 2500 }
::= { hwDot1agCfmMaEntry 11 }
hwDot1agCfmMaMepFngResetTime OBJECT-TYPE
SYNTAX Integer32 (0..30000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the delay for the RMEP to send alarm clearance
messages after the fault is rectified.
The value must be an integer multiple of 500, for example, 500, 1000,
or 1500.
The value ranges from 0 to 30000 in milliseconds.
By default, the value is 10000.
"
DEFVAL { 10000 }
::= { hwDot1agCfmMaEntry 12 }
hwDot1agCfmMaFormat OBJECT-TYPE
SYNTAX INTEGER
{
string(2),
icc-based(32)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the format of the MA name.
string: indicates that the format of the MA name is string.
icc-based: indicates that the format of the MA name is ICC-based.
By default, the value is string.
"
DEFVAL { string }
::= { hwDot1agCfmMaEntry 13 }
hwDot1agCfmMaFormatName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..43))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the MA format name.
The type/format of this object is determined by the value
of the hwDot1agCfmMaFormatName object.
"
::= { hwDot1agCfmMaEntry 14 }
hwDot1agCfmMaRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the row status of this table.
The writable columns in a row can not be changed if the row
is active. All columns MUST have a valid value before a row
can be activated.
"
::= { hwDot1agCfmMaEntry 99 }
hwDot1agCfmMepObject OBJECT IDENTIFIER ::= { hwEthOam1ag 5 }
hwDot1agCfmMepTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDot1agCfmMepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table is used to create a Maintenance Association End Point (MEP).
"
REFERENCE
"802.1ag clauses 3.17, 12.14.7 and 19.2"
::= { hwDot1agCfmMepObject 1 }
hwDot1agCfmMepEntry OBJECT-TYPE
SYNTAX HwDot1agCfmMepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The MEP table entry.
"
INDEX { hwDot1agCfmMdIndex, hwDot1agCfmMaIndex, hwDot1agCfmMepIdentifier }
::= { hwDot1agCfmMepTable 1 }
HwDot1agCfmMepEntry ::=
SEQUENCE {
hwDot1agCfmMepIdentifier
Integer32,
hwDot1agCfmMepIsVlanType
TruthValue,
hwDot1agCfmMepIfIndex
InterfaceIndexOrZero,
hwDot1agCfmMepDot1qVlan
VlanIdOrNone,
hwDot1agCfmMepPeVlan
VlanIdOrNone,
hwDot1agCfmMepCeVlan
VlanIdOrNone,
hwDot1agCfmMepDirection
INTEGER,
hwDot1agCfmMepCcmSendEnabled
EnabledStatus,
hwDot1agCfmMepMacAddress
MacAddress,
hwDot1agCfmMepRowStatus
RowStatus
}
hwDot1agCfmMepIdentifier OBJECT-TYPE
SYNTAX Integer32 (1..8191)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
This object indicates the ID of the MEP.
Integer that is unique among all the MEPs in the same MA.
MEP Identifier is also known as the MEPID.
The value ranges from 1 to 8191.
"
::= { hwDot1agCfmMepEntry 1 }
hwDot1agCfmMepIsVlanType OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates whether the MEP in the MA is a VLAN-based MEP.
If the MEP is a VLAN-based MEP, the MA must have been associated
with a VLAN and the interface and VLAN information need not be configured.
If the MEP is not a VLAN-based MEP, entry creation fails.
"
::= { hwDot1agCfmMepEntry 2 }
hwDot1agCfmMepIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the interface to which the MEP is bound.
The interface is either a bridge port, or an aggregated IEEE 802.1
link within a bridge port, to which the MEP is attached.
By default, the value of IfIndex is 0.
"
DEFVAL { 0 }
::= { hwDot1agCfmMepEntry 3 }
hwDot1agCfmMepDot1qVlan OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the VLAN to which the interface that the MEP
is bound to belong.
"
::= { hwDot1agCfmMepEntry 4 }
hwDot1agCfmMepPeVlan OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the QinQ PE VLAN bound to the MEP.
"
::= { hwDot1agCfmMepEntry 5 }
hwDot1agCfmMepCeVlan OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the QinQ CE VLAN bound to the MEP.
"
::= { hwDot1agCfmMepEntry 6 }
hwDot1agCfmMepDirection OBJECT-TYPE
SYNTAX INTEGER
{
invalid(1),
dirInward(2),
dirOutward(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the direction in which the MEP sends the 802.1ag
protocol packets.
The value of this object can be:
invalid: indicates the invalid value.
dirInward: indicates that the 802.1ag protocol packets sent by an
inward-facing MEP are transmitted through all the interfaces
in the VLAN associated with the current MA (except the
interface where the MEP resides). That is, an inward-facing
MEP broadcasts the 802.1ag protocol packets in the VLAN
associated with the current MA.
dirOutward: indicates that the 802.1ag protocol packets sent by an
outward-facing MEP are transmitted directly through the
interface on which the MEP resides.
By default, the value is invalid.
"
DEFVAL { invalid }
::= { hwDot1agCfmMepEntry 7 }
hwDot1agCfmMepCcmSendEnabled OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates whether CCM sending is enabled on the MEP in an MA.
The value of this object can be:
enabled
disabled
By default, the value is disabled.
"
REFERENCE
"802.1ag clauses 12.14.7.1.3 and 20.9.1"
DEFVAL { disabled }
::= { hwDot1agCfmMepEntry 8 }
hwDot1agCfmMepMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates the MAC address of an MEP.
"
::= { hwDot1agCfmMepEntry 9 }
hwDot1agCfmMepRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the row status of this table.
The writable columns in a row can not be changed if the row
is active. All columns MUST have a valid value before a row
can be activated.
"
::= { hwDot1agCfmMepEntry 99 }
hwDot1agCfmRMepObject OBJECT IDENTIFIER ::= { hwEthOam1ag 6 }
hwDot1agCfmRMepTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDot1agCfmRMepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table is used to create a Remote Maintenance Association End Point (RMEP).
"
::= { hwDot1agCfmRMepObject 1 }
hwDot1agCfmRMepEntry OBJECT-TYPE
SYNTAX HwDot1agCfmRMepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The remote MEP table entity.
"
INDEX { hwDot1agCfmMdIndex, hwDot1agCfmMaIndex, hwDot1agCfmRMepIdentifier }
::= { hwDot1agCfmRMepTable 1 }
HwDot1agCfmRMepEntry ::=
SEQUENCE {
hwDot1agCfmRMepIdentifier
Integer32,
hwDot1agCfmRMepMacAddress
MacAddress,
hwDot1agCfmRMepCcmRecvEnabled
EnabledStatus,
hwDot1agCfmRMepStateIsUp
INTEGER,
hwDot1agCfmRMepHighestPrDefect
HWDot1agCfmHighestDefectPri,
hwDot1agCfmRMepRowStatus
RowStatus
}
hwDot1agCfmRMepIdentifier OBJECT-TYPE
SYNTAX Integer32 (1..8191)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
This object indicates the ID of the RMEP.
The value ranges from 1 to 8191.
"
::= { hwDot1agCfmRMepEntry 1 }
hwDot1agCfmRMepMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the MAC address of the interface
the RMEP resides.
"
::= { hwDot1agCfmRMepEntry 2 }
hwDot1agCfmRMepCcmRecvEnabled OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates whether CCM receiving is enabled on the current device.
The value can be:
enabled
disabled
By default, the value is disabled.
"
DEFVAL { disabled }
::= { hwDot1agCfmRMepEntry 3 }
hwDot1agCfmRMepStateIsUp OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2),
invalid(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates the CFM status. The value can be:
up: indicates that the CFM status is Up.
down: indicates that the CFM status is Down.
invalid: indicates that the CFM status is not enabled.
"
::= { hwDot1agCfmRMepEntry 4 }
hwDot1agCfmRMepHighestPrDefect OBJECT-TYPE
SYNTAX HWDot1agCfmHighestDefectPri
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates the severity level of the fault on an RMEP.
If the CFM status is Up, this object is displayed as none.
"
REFERENCE
"802.1ag clause 12.14.7.1.3 20.32.9 and Table 20-1"
::= { hwDot1agCfmRMepEntry 5 }
hwDot1agCfmRMepRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the row status of this table.
The writable columns in a row can not be changed if the row
is active. All columns MUST have a valid value before a row
can be activated.
"
::= { hwDot1agCfmRMepEntry 99 }
hwDot1agCfmMipObject OBJECT IDENTIFIER ::= { hwEthOam1ag 7 }
hwDot1agCfmMipTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDot1agCfmMipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table is used to display information about a Maintenance
Association Intermediate Point (MIP).
"
::= { hwDot1agCfmMipObject 1 }
hwDot1agCfmMipEntry OBJECT-TYPE
SYNTAX HwDot1agCfmMipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The MIP table entry.
"
INDEX { hwDot1agCfmMipIfIndex }
::= { hwDot1agCfmMipTable 1 }
HwDot1agCfmMipEntry ::=
SEQUENCE {
hwDot1agCfmMipIfIndex
InterfaceIndex,
hwDot1agCfmMipLevel
HWDot1agCfmMDLevel,
hwDot1agCfmMipIfMacAddress
MacAddress
}
hwDot1agCfmMipIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This object indicates the interface on which the MIP resides.
"
::= { hwDot1agCfmMipEntry 1 }
hwDot1agCfmMipLevel OBJECT-TYPE
SYNTAX HWDot1agCfmMDLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates the level of the MIP.
The value ranges from 0 to 7.
"
REFERENCE
"802.1ag clause 12.14.5.1.3 b)"
::= { hwDot1agCfmMipEntry 2 }
hwDot1agCfmMipIfMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates the MAC address of the interface on which the MIP resides.
"
::= { hwDot1agCfmMipEntry 3 }
hwDot1agCfmMacPingObject OBJECT IDENTIFIER ::= { hwEthOam1ag 8 }
hwDot1agCfmMacPingTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDot1agCfmMacPingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The entries related to the Mac Ping include the parameters input
by users and the returned results.
"
::= { hwDot1agCfmMacPingObject 1 }
hwDot1agCfmMacPingEntry OBJECT-TYPE
SYNTAX HwDot1agCfmMacPingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table is used to configure the MAC ping function.
"
INDEX { hwDot1agCfmMacPingIndex }
::= { hwDot1agCfmMacPingTable 1 }
HwDot1agCfmMacPingEntry ::=
SEQUENCE {
hwDot1agCfmMacPingIndex
Unsigned32,
hwDot1agCfmMacPingState
EnabledStatus,
hwDot1agCfmMacPingMdName
OCTET STRING,
hwDot1agCfmMacPingMaName
OCTET STRING,
hwDot1agCfmMacPingMepId
Integer32,
hwDot1agCfmMacPingDestIsMepId
TruthValue,
hwDot1agCfmMacPingDestMepId
Integer32,
hwDot1agCfmMacPingMacAddress
MacAddress,
hwDot1agCfmMacPingOutIfIndex
InterfaceIndexOrZero,
hwDot1agCfmMacPingTimeOut
Unsigned32,
hwDot1agCfmMacPingCount
Unsigned32,
hwDot1agCfmMacPingPacketSize
Integer32,
hwDot1agCfmMacPingPriority
Integer32,
hwDot1agCfmMacPingSendPacketNum
Counter32,
hwDot1agCfmMacPingRecvPacketNum
Counter32,
hwDot1agCfmMacPingPacketLossRatio
Unsigned32,
hwDot1agCfmMacPingRecvTimeDelayMin
Unsigned32,
hwDot1agCfmMacPingRecvTimeDelayMax
Unsigned32,
hwDot1agCfmMacPingRecvTimeDelayAvg
Unsigned32,
hwDot1agCfmMacPingRowStatus
RowStatus
}
hwDot1agCfmMacPingIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This object indicates the index of this table.
"
::= { hwDot1agCfmMacPingEntry 1 }
hwDot1agCfmMacPingState OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates whether the MAC ping function is enabled.
The value can be:
enabled
disabled
By default, the value is disabled.
"
DEFVAL { disabled }
::= { hwDot1agCfmMacPingEntry 2 }
hwDot1agCfmMacPingMdName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..43))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the name of the MD where MAC ping is performed.
"
::= { hwDot1agCfmMacPingEntry 3 }
hwDot1agCfmMacPingMaName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..43))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the name of the MA where MAC ping is performed.
"
::= { hwDot1agCfmMacPingEntry 4 }
hwDot1agCfmMacPingMepId OBJECT-TYPE
SYNTAX Integer32 (0 | 1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the ID of the local MEP of the 802.1ag MAC ping operation.
The value ranges from 1 to 8191.
By default, the value is 0.
"
DEFVAL { 0 }
::= { hwDot1agCfmMacPingEntry 5 }
hwDot1agCfmMacPingDestIsMepId OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates whether the destination MAC address of the LBM
is the MAC address of the interface on which the RMEP resides.
"
::= { hwDot1agCfmMacPingEntry 6 }
hwDot1agCfmMacPingDestMepId OBJECT-TYPE
SYNTAX Integer32 (0 | 1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the ID of the destination RMEP of the 802.1ag
MAC ping operation.
The value ranges from 1 to 8191.
By default, the value is 0.
"
DEFVAL { 0 }
::= { hwDot1agCfmMacPingEntry 7 }
hwDot1agCfmMacPingMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the destination MAC address of the LBM.
"
::= { hwDot1agCfmMacPingEntry 8 }
hwDot1agCfmMacPingOutIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the outbound interface that sends the LBM.
"
DEFVAL { 0 }
::= { hwDot1agCfmMacPingEntry 9 }
hwDot1agCfmMacPingTimeOut OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the timeout period for waiting for the LBR.
The value ranges from 1 to 65535 in milliseconds.
By default, the value is 2000.
"
DEFVAL { 2000 }
::= { hwDot1agCfmMacPingEntry 10 }
hwDot1agCfmMacPingCount OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the number of ping operation times.
The value ranges from 1 to 4294967295.
By default, the value is 5.
"
DEFVAL { 5 }
::= { hwDot1agCfmMacPingEntry 11 }
hwDot1agCfmMacPingPacketSize OBJECT-TYPE
SYNTAX Integer32 (64..2000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the length of the LBM.
The value ranges from 64 to 2000.
By default, the value is 95.
"
DEFVAL { 95 }
::= { hwDot1agCfmMacPingEntry 12 }
hwDot1agCfmMacPingPriority OBJECT-TYPE
SYNTAX Integer32 (0..7 | 255 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the priority of the sent LBM packet.
The value ranges from 0 to 7 or can be 255. The value 255 is an invalid value.
If the value is set to 255, this value should be identical with the priority value of the MA which the MEP belongs to.
The greater the value is, the higher the priority is.
"
DEFVAL { 255 }
::= { hwDot1agCfmMacPingEntry 13 }
hwDot1agCfmMacPingSendPacketNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates the number of sent LBMs.
"
::= { hwDot1agCfmMacPingEntry 14 }
hwDot1agCfmMacPingRecvPacketNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates the number of received LBRs.
"
::= { hwDot1agCfmMacPingEntry 15 }
hwDot1agCfmMacPingPacketLossRatio OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates the frame loss ratio on the physical link.
The value ranges from 0 to 100.
"
::= { hwDot1agCfmMacPingEntry 16 }
hwDot1agCfmMacPingRecvTimeDelayMin OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates the minimum delay in receiving the LBM.
"
::= { hwDot1agCfmMacPingEntry 17 }
hwDot1agCfmMacPingRecvTimeDelayMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates the maximum delay in receiving the LBM.
"
::= { hwDot1agCfmMacPingEntry 18 }
hwDot1agCfmMacPingRecvTimeDelayAvg OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates the average delay in receiving the LBM.
"
::= { hwDot1agCfmMacPingEntry 19 }
hwDot1agCfmMacPingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the row status of this table.
The writable columns in a row can not be changed if the row
is active. All columns MUST have a valid value before a row
can be activated.
"
::= { hwDot1agCfmMacPingEntry 99 }
hwDot1agCfmMacTraceObjects OBJECT IDENTIFIER ::= { hwEthOam1ag 9 }
hwDot1agCfmMacTraceTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDot1agCfmMacTraceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table is used to configure the MAC trace function.
"
::= { hwDot1agCfmMacTraceObjects 1 }
hwDot1agCfmMacTraceEntry OBJECT-TYPE
SYNTAX HwDot1agCfmMacTraceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the MAC Trace table entry.
"
INDEX { hwDot1agCfmMacTraceIndex }
::= { hwDot1agCfmMacTraceTable 1 }
HwDot1agCfmMacTraceEntry ::=
SEQUENCE {
hwDot1agCfmMacTraceIndex
Unsigned32,
hwDot1agCfmMacTraceState
EnabledStatus,
hwDot1agCfmMacTraceMdName
OCTET STRING,
hwDot1agCfmMacTraceMaName
OCTET STRING,
hwDot1agCfmMacTraceMepId
Integer32,
hwDot1agCfmMacTraceDestIsMepId
TruthValue,
hwDot1agCfmMacTraceDestMepId
Integer32,
hwDot1agCfmMacTraceMacAddress
MacAddress,
hwDot1agCfmMacTraceOutIfIndex
InterfaceIndexOrZero,
hwDot1agCfmMacTraceTimeOut
Unsigned32,
hwDot1agCfmMacTraceTTL
Unsigned32,
hwDot1agCfmMacTraceSendSeqNumber
Unsigned32,
hwDot1agCfmMacTraceResult
INTEGER,
hwDot1agCfmMacTraceRowStatus
RowStatus
}
hwDot1agCfmMacTraceIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This object indicates the index of this table.
"
::= { hwDot1agCfmMacTraceEntry 1 }
hwDot1agCfmMacTraceState OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates whether the MAC trace function is enabled.
The value can be:
enabled
disabled
By default, the value is disabled.
"
DEFVAL { disabled }
::= { hwDot1agCfmMacTraceEntry 2 }
hwDot1agCfmMacTraceMdName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..43))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the name of the MD where MAC trace is performed.
"
::= { hwDot1agCfmMacTraceEntry 3 }
hwDot1agCfmMacTraceMaName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..43))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the name of the MA where MAC trace is performed.
"
::= { hwDot1agCfmMacTraceEntry 4 }
hwDot1agCfmMacTraceMepId OBJECT-TYPE
SYNTAX Integer32 (0 | 1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the ID of the local MEP of the 802.1ag
MAC trace operation.
The value ranges from 1 to 8191.
By default, the value is 0.
"
DEFVAL { 0 }
::= { hwDot1agCfmMacTraceEntry 5 }
hwDot1agCfmMacTraceDestIsMepId OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates whether the destination MAC address of the LTM
is the MAC address of the interface on which the RMEP resides.
"
::= { hwDot1agCfmMacTraceEntry 6 }
hwDot1agCfmMacTraceDestMepId OBJECT-TYPE
SYNTAX Integer32 (0 | 1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the ID of the destination RMEP of the 802.1ag
MAC trace operation.
The value ranges from 1 to 8191.
By default, the value is 0.
"
DEFVAL { 0 }
::= { hwDot1agCfmMacTraceEntry 7 }
hwDot1agCfmMacTraceMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the destination MAC address of the LTM.
"
::= { hwDot1agCfmMacTraceEntry 8 }
hwDot1agCfmMacTraceOutIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the outbound interface that sends the LTM.
"
DEFVAL { 0 }
::= { hwDot1agCfmMacTraceEntry 9 }
hwDot1agCfmMacTraceTimeOut OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the timeout period for waiting for the LTR.
The value ranges from 1 to 65535, in milliseconds.
By default, the value is 2000.
"
DEFVAL { 2000 }
::= { hwDot1agCfmMacTraceEntry 10 }
hwDot1agCfmMacTraceTTL OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the TTL value of the 802.1ag MAC trace operation.
The value ranges from 1 to 255.
By default, the value is 64.
"
DEFVAL { 64 }
::= { hwDot1agCfmMacTraceEntry 11 }
hwDot1agCfmMacTraceSendSeqNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates the sequence number of the sent LTR.
"
::= { hwDot1agCfmMacTraceEntry 12 }
hwDot1agCfmMacTraceResult OBJECT-TYPE
SYNTAX INTEGER
{
invalid(1),
successful(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates the result of the MAC trace operation.
"
::= { hwDot1agCfmMacTraceEntry 13 }
hwDot1agCfmMacTraceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the row status of this table.
The writable columns in a row can not be changed if the row
is active. All columns MUST have a valid value before a row
can be activated.
"
::= { hwDot1agCfmMacTraceEntry 99 }
hwDot1agCfmMacTraceReplyTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDot1agCfmMacTraceReplyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table is used to display information about the LTR for responding
to the MAC trace operation.
"
::= { hwDot1agCfmMacTraceObjects 2 }
hwDot1agCfmMacTraceReplyEntry OBJECT-TYPE
SYNTAX HwDot1agCfmMacTraceReplyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The Mac Trace result table entry.
"
INDEX { hwDot1agCfmMacTraceReplySeqNumber, hwDot1agCfmMacTraceReplyRecvOrder }
::= { hwDot1agCfmMacTraceReplyTable 1 }
HwDot1agCfmMacTraceReplyEntry ::=
SEQUENCE {
hwDot1agCfmMacTraceReplySeqNumber
Unsigned32,
hwDot1agCfmMacTraceReplyRecvOrder
Unsigned32,
hwDot1agCfmMacTraceReplyTTL
Unsigned32,
hwDot1agCfmMacTraceReplyForwarded
TruthValue,
hwDot1agCfmMacTraceReplyTerminalMep
TruthValue,
hwDot1agCfmMacTraceReplyRelayAction
HWDot1agCfmRelayActionFieldValue,
hwDot1agCfmMacTraceReplyIngressAction
HWDot1agCfmIngressActionFieldValue,
hwDot1agCfmMacTraceReplyIngressMac
MacAddress,
hwDot1agCfmMacTraceReplyIngressIfName
OCTET STRING,
hwDot1agCfmMacTraceReplyEgressAction
HWDot1agCfmEgressActionFieldValue,
hwDot1agCfmMacTraceReplyEgressMac
MacAddress,
hwDot1agCfmMacTraceReplyEgressIfName
OCTET STRING
}
hwDot1agCfmMacTraceReplySeqNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This object indicates the index of this table.
The value is the sequence number of the LTR.
"
REFERENCE
"802.1ag clause 12.14.7.5"
::= { hwDot1agCfmMacTraceReplyEntry 1 }
hwDot1agCfmMacTraceReplyRecvOrder OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This object indicates the index of this table.
The value is the sequence in which the MAC trace results are displayed.
"
::= { hwDot1agCfmMacTraceReplyEntry 2 }
hwDot1agCfmMacTraceReplyTTL OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates the TTL of the LTR.
The value ranges from 0 to 255.
"
::= { hwDot1agCfmMacTraceReplyEntry 3 }
hwDot1agCfmMacTraceReplyForwarded OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates whether the device that sends the LTR keeps on
forwarding LTMs.
"
::= { hwDot1agCfmMacTraceReplyEntry 4 }
hwDot1agCfmMacTraceReplyTerminalMep OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates whether the LTR is sent by an MEP.
"
::= { hwDot1agCfmMacTraceReplyEntry 5 }
hwDot1agCfmMacTraceReplyRelayAction OBJECT-TYPE
SYNTAX HWDot1agCfmRelayActionFieldValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates the value of the Relay Action field in the LTR.
"
::= { hwDot1agCfmMacTraceReplyEntry 6 }
hwDot1agCfmMacTraceReplyIngressAction OBJECT-TYPE
SYNTAX HWDot1agCfmIngressActionFieldValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates the value of the Ingress Action field in the LTR.
"
::= { hwDot1agCfmMacTraceReplyEntry 7 }
hwDot1agCfmMacTraceReplyIngressMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates the physical MAC address carried in the ingress
MAC address field in the LTR.
"
::= { hwDot1agCfmMacTraceReplyEntry 8 }
hwDot1agCfmMacTraceReplyIngressIfName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates the name of the inbound interface of the LTR.
"
::= { hwDot1agCfmMacTraceReplyEntry 9 }
hwDot1agCfmMacTraceReplyEgressAction OBJECT-TYPE
SYNTAX HWDot1agCfmEgressActionFieldValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates the value of the Egress Action field in the LTR.
"
::= { hwDot1agCfmMacTraceReplyEntry 10 }
hwDot1agCfmMacTraceReplyEgressMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates the physical MAC address carried in the egress
MAC address field in the LTR.
"
::= { hwDot1agCfmMacTraceReplyEntry 11 }
hwDot1agCfmMacTraceReplyEgressIfName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates the name of the interface that forwards the LTR.
"
::= { hwDot1agCfmMacTraceReplyEntry 12 }
hwDot1agCfmQueryObject OBJECT IDENTIFIER ::= { hwEthOam1ag 10 }
hwDot1agCfmQueryMdIndexTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDot1agCfmQueryMdIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table is used to get the index of the Maintenance Domain table.
"
::= { hwDot1agCfmQueryObject 1 }
hwDot1agCfmQueryMdIndexEntry OBJECT-TYPE
SYNTAX HwDot1agCfmQueryMdIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The Md Index table entry.
"
INDEX { hwDot1agCfmQueryMdName }
::= { hwDot1agCfmQueryMdIndexTable 1 }
HwDot1agCfmQueryMdIndexEntry ::=
SEQUENCE {
hwDot1agCfmQueryMdName
OCTET STRING,
hwDot1agCfmQueryMdIndex
Unsigned32
}
hwDot1agCfmQueryMdName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..43))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This object indicates the name of the Maintenance Domain.
"
::= { hwDot1agCfmQueryMdIndexEntry 1 }
hwDot1agCfmQueryMdIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates the index to the Maintenance Domain table.
"
::= { hwDot1agCfmQueryMdIndexEntry 2 }
hwDot1agCfmQueryMaIndexTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDot1agCfmQueryMaIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table is used to get the index of the Maintenance Association table.
"
::= { hwDot1agCfmQueryObject 2 }
hwDot1agCfmQueryMaIndexEntry OBJECT-TYPE
SYNTAX HwDot1agCfmQueryMaIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The Ma Index table entry.
"
INDEX { hwDot1agCfmQueryMdName , hwDot1agCfmQueryMaName}
::= { hwDot1agCfmQueryMaIndexTable 1 }
HwDot1agCfmQueryMaIndexEntry ::=
SEQUENCE {
hwDot1agCfmQueryMaName
OCTET STRING,
hwDot1agCfmQueryMaIndex
Unsigned32
}
hwDot1agCfmQueryMaName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..43))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This object indicates the name of Maintenance Association.
"
::= { hwDot1agCfmQueryMaIndexEntry 1 }
hwDot1agCfmQueryMaIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object indicates the index to the Maintenance Association table.
"
::= { hwDot1agCfmQueryMaIndexEntry 2 }
hwDot1agCfmMPAddressModel OBJECT-TYPE
SYNTAX INTEGER
{
bridge(1),
individual(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object indicates the MP address model of the CFM.
The value of this object can be:
bridge: indicates bridge MAC MP address model.
individual: indicates individual MP address model.
"
::= { hwEthOam1ag 101 }
hwEthOam3ah OBJECT IDENTIFIER ::= { hwEthOamMib 2 }
-- ---------------------------------------------
-- hwDot3ah
-- ---------------------------------------------
hwDot3ahEfmEnabled OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Enable the EFM globally.
"
::= { hwEthOam3ah 1 }
-- EfmObject
hwDot3ahEfmObject OBJECT IDENTIFIER ::= { hwEthOam3ah 2 }
-- DetectModeTable
hwDot3ahEfmDetectModeTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDot3ahEfmDetectModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Set the detection mode table in the last one kilometer on the interface.
"
::= { hwDot3ahEfmObject 1 }
hwDot3ahEfmDetectModeEntry OBJECT-TYPE
SYNTAX HwDot3ahEfmDetectModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Set the detection mode entity in the last one kilometer on the interface.
"
AUGMENTS { hwDot3ahEfmEntry }
::= { hwDot3ahEfmDetectModeTable 1 }
HwDot3ahEfmDetectModeEntry ::=
SEQUENCE {
hwDot3ahEfmDetectMode
HWDetectType,
hwDot3ahEfmDetectInterval
TimeInterval,
hwDot3ahEfmDetectMalfunction
Integer32
}
hwDot3ahEfmDetectMode OBJECT-TYPE
SYNTAX HWDetectType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Detection mode ( fast detection and standard detection)
"
DEFVAL { NormalDetect }
::= { hwDot3ahEfmDetectModeEntry 11 }
hwDot3ahEfmDetectInterval OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Time interval of detection
"
::= { hwDot3ahEfmDetectModeEntry 12 }
hwDot3ahEfmDetectMalfunction OBJECT-TYPE
SYNTAX Integer32 (0..768)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Failure description from 802.3ah and from associated modules.
"
::= { hwDot3ahEfmDetectModeEntry 13 }
-- ***************************************************************
--
-- Ethernet OAM Control group
--
hwDot3ahEfmTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDot3ahEfmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the primary controls and status for the
OAM capabilities of an Ethernet like interface. There will be
one row in this table for each Ethernet like interface in the
system that supports the OAM functions defined in [802.3ah].
"
::= { hwDot3ahEfmObject 2 }
hwDot3ahEfmEntry OBJECT-TYPE
SYNTAX HwDot3ahEfmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information on the Ethernet
OAM function for a single Ethernet like interface. Entries in
the table are created automatically for each interface
supporting Ethernet OAM. The status of the row entry can be
determined from hwDot3ahEfmOperStatus.
A hwDot3ahEfmEntry is indexed in the hwDot3ahEfmTable by the ifIndex
object of the Interfaces MIB.
"
INDEX { ifIndex }
::= { hwDot3ahEfmTable 1 }
HwDot3ahEfmEntry ::=
SEQUENCE {
hwDot3ahEfmAdminState
EnabledStatus,
hwDot3ahEfmOperStatus
INTEGER,
hwDot3ahEfmMode
INTEGER,
hwDot3ahEfmMaxOamPduSize
Unsigned32,
hwDot3ahEfmConfigRevision
Unsigned32,
hwDot3ahEfmFunctionsSupported
BITS,
hwDot3ahEfmTimeout
Unsigned32,
hwDot3ahEfmInterval
Unsigned32
}
hwDot3ahEfmAdminState OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to provision the default administrative
OAM mode for this interface. This object represents the
desired state of OAM for this interface.
The hwDot3ahEfmAdminState always starts in the disabled(2) state
until an explicit management action or configuration
information retained by the system causes a transition to the
enabled(2) state. When enabled(1), Ethernet OAM will attempt
to operate over this interface.
"
REFERENCE
"[802.3ah], 30.3.6.1.2"
::= { hwDot3ahEfmEntry 1 }
hwDot3ahEfmOperStatus OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
linkFault(2),
passiveWait(3),
activeSendLocal(4),
sendLocalAndRemote(5),
sendLocalAndRemoteOk(6),
oamPeeringLocallyRejected(7),
oamPeeringRemotelyRejected(8),
operational(9),
nonOperHalfDuplex(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"At initialization and failure conditions, two OAM entities on
the same full-duplex Ethernet link begin a discovery phase to
determine what OAM capabilities may be used on that link.
"
REFERENCE
"[802.3ah], 30.3.6.1.4, 30.3.6.1.10, 30.3.6.1.11"
::= { hwDot3ahEfmEntry 2 }
hwDot3ahEfmMode OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
passive(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object configures the mode of OAM operation for this
Ethernet like interface. OAM on Ethernet interfaces may be in
'active' mode or 'passive' mode.
"
REFERENCE
"[802.3ah], 30.3.6.1.3"
::= { hwDot3ahEfmEntry 3 }
hwDot3ahEfmMaxOamPduSize OBJECT-TYPE
SYNTAX Unsigned32 (64..1518)
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The largest OAMPDU that the OAM entity supports. OAM
entities exchange maximum OAMPDU sizes and negotiate to use
the smaller of the two maximum OAMPDU sizes between the peers.
This value is determined by the local implementation.
"
REFERENCE
"[802.3ah], 30.3.6.1.8"
::= { hwDot3ahEfmEntry 4 }
hwDot3ahEfmConfigRevision OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configuration revision of the OAM entity as reflected in
the latest OAMPDU sent by the OAM entity. The config revision
is used by OAM entities to indicate configuration changes have
occurred which might require the peer OAM entity to
re-evaluate whether OAM peering is allowed.
"
REFERENCE
"[802.3ah], 30.3.6.1.12"
::= { hwDot3ahEfmEntry 5 }
hwDot3ahEfmFunctionsSupported OBJECT-TYPE
SYNTAX BITS
{
unidirectionalSupport(0),
loopbackSupport(1),
eventSupport(2),
variableSupport(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OAM functions supported on this Ethernet like interface.
OAM consists of separate functional sets beyond the basic
discovery process which is always required. These functional
groups can be supported independently by any implementation.
These values are communicated to the peer via the local
configuration field of Information OAMPDUs.
Setting 'unidirectionalSupport(0)' indicates that the OAM
entity supports the transmission of OAMPDUs on links that are
operating in unidirectional mode (traffic flowing in one
direction only). Setting 'loopbackSupport(1)' indicates the
OAM entity can initiate and respond to loopback commands.
Setting 'eventSupport(2)' indicates the OAM entity can send
and receive Event Notification OAMPDUs. Setting
'variableSupport(3)' indicates the OAM entity can send and
receive Variable Request and Response OAMPDUs.
"
REFERENCE
"[802.3ah], 30.3.6.1.6"
::= { hwDot3ahEfmEntry 6 }
hwDot3ahEfmTimeout OBJECT-TYPE
SYNTAX Unsigned32 (300..30000)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The EFM Timeout object defines the max time that the EFM session
stays in detect mode since the last OAMPDU received. if there's
no OAMPDU received within the time the timeout value defines, the
EFM session will turn into discovery state.
The value of EFM Timeout should be three or more times the value of
the sending interval of the peer interface.
The timeout value must be an exact integral multiple of 100.
Range: 300-30000
Default: 5000
Unit: milliseconds
"
REFERENCE
"[802.3ah]"
::= { hwDot3ahEfmEntry 7 }
hwDot3ahEfmInterval OBJECT-TYPE
SYNTAX Unsigned32 (100..1000)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The EFM interval object defines the interval of sending OAM PDUs.
The value of EFM interval should be the same as the value of
the peer interface.
The interval value must be an exact integral multiple of 100.
Range: 100-1000
Default: 1000
Unit: milliseconds
"
REFERENCE
"[802.3ah]"
::= { hwDot3ahEfmEntry 8 }
-- ***************************************************************
--
-- Ethernet OAM Peer group
--
hwDot3ahEfmPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDot3ahEfmPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about the OAM peer for a
particular Ethernet like interface. OAM entities communicate
with a single OAM peer entity on Ethernet links on which OAM
is enabled and operating properly. There is one entry in this
table for each entry in the hwDot3ahEfmTable for which information
on the peer OAM entity is available.
"
::= { hwDot3ahEfmObject 3 }
hwDot3ahEfmPeerEntry OBJECT-TYPE
SYNTAX HwDot3ahEfmPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information on the peer OAM
entity for a single Ethernet like interface.
Note that there is at most one OAM peer for each Ethernet like
interface. Entries are automatically created when information
about the OAM peer entity becomes available, and automatically
deleted when the OAM peer entity is no longer in
communication. Peer information is not available when
hwDot3ahEfmOperStatus is disabled(1), linkFault(2),
passiveWait(3), activeSendLocal(4). or nonOperHalfDuplex(10)).
"
INDEX { ifIndex }
::= { hwDot3ahEfmPeerTable 1 }
HwDot3ahEfmPeerEntry ::=
SEQUENCE {
hwDot3ahEfmPeerMacAddress
OCTET STRING,
hwDot3ahEfmPeerVendorOui
HWDot3Oui,
hwDot3ahEfmPeerVendorInfo
Unsigned32,
hwDot3ahEfmPeerMode
INTEGER,
hwDot3ahEfmPeerMaxOamPduSize
Unsigned32,
hwDot3ahEfmPeerConfigRevision
Unsigned32,
hwDot3ahEfmPeerFunctionsSupported
BITS
}
hwDot3ahEfmPeerMacAddress OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the peer OAM entity. The MAC address is
derived from the most recently received OAMPDU.
"
REFERENCE
"[802.3ah], 30.3.6.1.5."
::= { hwDot3ahEfmPeerEntry 1 }
hwDot3ahEfmPeerVendorOui OBJECT-TYPE
SYNTAX HWDot3Oui
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OUI of the OAM peer as reflected in the latest
Information OAMPDU received with a Local Information TLV. The
OUI can be used to identify the vendor of the remote OAM
entity. This value is initialized to zero before any Local
Information TLV is received.
"
REFERENCE
"[802.3ah], 30.3.6.1.16."
::= { hwDot3ahEfmPeerEntry 2 }
hwDot3ahEfmPeerVendorInfo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Vendor Info of the OAM peer as reflected in the latest
Information OAMPDU received with a Local Information TLV. The
vendor information field is within the Local Information TLV,
and can be used to determine additional information about the
peer entity. The format of the vendor information is
unspecified within the 32-bit field. This value is
initialized to zero before any Local Information TLV is
received.
"
REFERENCE
"[802.3ah], 30.3.6.1.17."
::= { hwDot3ahEfmPeerEntry 3 }
hwDot3ahEfmPeerMode OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
passive(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mode of the OAM peer as reflected in the latest
Information OAMPDU received with a Local Information TLV. The
mode of the peer can be determined from the Configuration
field in the Local Information TLV of the last Information
OAMPDU received from the peer. The value is unknown(3)
whenever no Local Information TLV has been received. The
values of active(1) and passive(2) are returned when a Local
Information TLV has been received indicating the peer is in
active or passive mode, respectively.
"
REFERENCE
"[802.3ah], 30.3.6.1.7."
::= { hwDot3ahEfmPeerEntry 4 }
hwDot3ahEfmPeerMaxOamPduSize OBJECT-TYPE
SYNTAX Unsigned32 (0..1518)
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum size of OAMPDU supported by the peer as reflected
in the latest Information OAMPDU received with a Local
Information TLV. Ethernet OAM on this interface must not use
OAMPDUs that exceed this size. The maximum OAMPDU size can be
determined from the PDU Configuration field of the Local
Information TLV of the last Information OAMPDU received from
the peer. A value of zero is returned if no Local Information
TLV has been received. Otherwise, the value of the OAM peer's
maximum OAMPDU size is returned in this value.
Note that the values 1..63 are invalid sizes for Ethernet
frames and should never appear.
"
REFERENCE
"[802.3ah], 30.3.6.1.9."
::= { hwDot3ahEfmPeerEntry 5 }
hwDot3ahEfmPeerConfigRevision OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configuration revision of the OAM peer as reflected in
the latest OAMPDU. This attribute is changed by the peer
whenever it has a local configuration change for Ethernet OAM
this interface. The configuration revision can be determined
from the Revision field of the Local Information TLV of the
most recently received Information OAMPDU with a Local
Information TLV. A value of zero is returned if no Local
Information TLV has been received.
"
REFERENCE
"[802.3ah], 30.3.6.1.13."
::= { hwDot3ahEfmPeerEntry 6 }
hwDot3ahEfmPeerFunctionsSupported OBJECT-TYPE
SYNTAX BITS
{
unidirectionalSupport(0),
loopbackSupport(1),
eventSupport(2),
variableSupport(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OAM functions supported on this Ethernet like interface.
OAM consists of separate functionality sets above the basic
discovery process. This value indicates the capabilities of
the peer OAM entity with respect to these functions. This
value is initialized so all bits are clear.
If unidirectionalSupport(0) is set, then the peer OAM entity
supports sending OAM frames on Ethernet interfaces when the
receive path is known to be inoperable. If
loopbackSupport(1) is set, then the peer OAM entity can send
and receive OAM loopback commands. If eventSupport(2) is set,
then the peer OAM entity can send and receive event OAMPDUs to
signal various error conditions. If variableSupport(3) is set,
then the peer OAM entity can send and receive variable
requests to monitor attribute value as described in Clause 57
of [802.3ah].
The capabilities of the OAM peer can be determined from the
configuration field of the Local Information TLV of the most
recently received Information OAMPDU with a Local Information
TLV. All zeros are returned if no Local Information TLV has
yet been received.
"
REFERENCE
"[802.3ah], REFERENCE 30.3.6.1.7."
::= { hwDot3ahEfmPeerEntry 7 }
-- ***************************************************************
--
-- Ethernet OAM Loopback group
--
hwDot3ahEfmLoopbackTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDot3ahEfmLoopbackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains controls for the loopback state of the
local link as well as indicating the status of the loopback
function. There is one entry in this table for each entry in
hwDot3ahEfmTable that supports loopback functionality (where
hwDot3ahEfmFunctionsSupported includes the loopbackSupport bit
set).
Loopback can be used to place the remote OAM entity in a state
where every received frame (except OAMPDUs) is echoed back
over the same interface on which they were received. In this
state, at the remote entity, 'normal' traffic is disabled as
only the looped back frames are transmitted on the interface.
Loopback is thus an intrusive operation that prohibits normal
data flow and should be used accordingly. "
::= { hwDot3ahEfmObject 4 }
hwDot3ahEfmLoopbackEntry OBJECT-TYPE
SYNTAX HwDot3ahEfmLoopbackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information on the loopback
status for a single Ethernet like interface. Entries in the
table are automatically created whenever the local OAM entity
supports loopback capabilities. The loopback status on the
interface can be determined from the hwDot3ahEfmLoopbackStatus
object.
"
INDEX { ifIndex }
::= { hwDot3ahEfmLoopbackTable 1 }
HwDot3ahEfmLoopbackEntry ::=
SEQUENCE {
hwDot3ahEfmLoopbackStatus
INTEGER,
hwDot3ahEfmLoopbackIgnoreRx
INTEGER,
hwDot3ahEfmLoopbackTimeout
Unsigned32
}
hwDot3ahEfmLoopbackStatus OBJECT-TYPE
SYNTAX INTEGER
{
noLoopback(1),
initiatingLoopback (2),
remoteLoopback(3),
terminatingLoopback(4),
localLoopback(5),
unknown(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The loopback status of the OAM entity. When
operating in normal mode with no loopback in progress, the
status reads noLoopback(1).
The values initiatingLooopback(2) and terminatingLoopback(4)
can be read or written. The other values can only be read -
they can never be written.
"
REFERENCE
"[802.3ah], REFERENCE 57.2.11, 30.3.61.14,
30.3.6.1.15"
::= { hwDot3ahEfmLoopbackEntry 1 }
hwDot3ahEfmLoopbackIgnoreRx OBJECT-TYPE
SYNTAX INTEGER
{
ignore(1),
process(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Since OAM loopback is a disruptive operation (user traffic
does not pass), this attribute provides a mechanism to provide
controls over whether received OAM loopback commands are
processed or ignored. When the value is ignore(1), received
loopback commands are ignored. When the value is process(2),
OAM loopback commands are processed. The default value is to
process loopback commands (process(2)).
"
REFERENCE
"[802.3ah], REFERENCE 57.2.11, 30.3.61.14,
30.3.6.1.15"
DEFVAL { process }
::= { hwDot3ahEfmLoopbackEntry 2 }
hwDot3ahEfmLoopbackTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0..1000)
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the timeout period for a remote loopback. The
value ranges from 0 to 1000 in minutes. The default value is 20
minutes. 0 indicates that no timeout period is set.
"
DEFVAL { 20 }
::= { hwDot3ahEfmLoopbackEntry 3 }
-- ***************************************************************
--
-- Ethernet OAM Statistics group
--
hwDot3ahEfmStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDot3ahEfmStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains statistics for the OAM function on a
particular Ethernet like interface. There is an entry in the
table for every entry in the hwDot3ahEfmTable.
The counters in this table are defined as 32-bit entries to
match the counter size as defined in [802.3ah]. Given the OAM
protocol is a slow protocol, the counters increment at a slow
rate.
"
::= { hwDot3ahEfmObject 5 }
hwDot3ahEfmStatsEntry OBJECT-TYPE
SYNTAX HwDot3ahEfmStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing statistics information on
the Ethernet OAM function for a single Ethernet like
interface. Entries are automatically created for every entry
in the hwDot3ahEfmTable. Counters are maintained across
transitions in hwDot3ahEfmOperStatus.
"
INDEX { ifIndex }
::= { hwDot3ahEfmStatsTable 1 }
HwDot3ahEfmStatsEntry ::=
SEQUENCE {
hwDot3ahEfmInformationTx
Counter32,
hwDot3ahEfmInformationRx
Counter32,
hwDot3ahEfmUniqueEventNotificationTx
Counter32,
hwDot3ahEfmUniqueEventNotificationRx
Counter32,
hwDot3ahEfmDuplicateEventNotificationTx
Counter32,
hwDot3ahEfmDuplicateEventNotificationRx
Counter32,
hwDot3ahEfmLoopbackControlTx
Counter32,
hwDot3ahEfmLoopbackControlRx
Counter32,
hwDot3ahEfmVariableRequestTx
Counter32,
hwDot3ahEfmVariableRequestRx
Counter32,
hwDot3ahEfmVariableResponseTx
Counter32,
hwDot3ahEfmVariableResponseRx
Counter32,
hwDot3ahEfmOrgSpecificTx
Counter32,
hwDot3ahEfmOrgSpecificRx
Counter32,
hwDot3ahEfmUnsupportedCodesTx
Counter32,
hwDot3ahEfmUnsupportedCodesRx
Counter32,
hwDot3ahEfmFramesLostDueToOam
Counter32
}
hwDot3ahEfmInformationTx OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of Information OAMPDUs transmitted on
this interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime. "
REFERENCE
"[802.3ah], 30.3.6.1.20."
::= { hwDot3ahEfmStatsEntry 1 }
hwDot3ahEfmInformationRx OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of Information OAMPDUs received on this
interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.
"
REFERENCE
"[802.3ah], 30.3.6.1.21."
::= { hwDot3ahEfmStatsEntry 2 }
hwDot3ahEfmUniqueEventNotificationTx OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of unique Event OAMPDUs transmitted on
this interface. Event notifications may be sent in duplicate
to increase the probability of successfully being received,
given the possibility that a frame may be lost in transit.
Duplicate Event Notification transmissions are counted by
hwDot3ahEfmDuplicateEventNotificationTx.
A unique Event Notification OAMPDU is indicated as an Event
Notification OAMPDU with a Sequence Number field that is
distinct from the previously transmitted Event Notification
OAMPDU Sequence Number.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.
"
REFERENCE
"[802.3ah], 30.3.6.1.22."
::= { hwDot3ahEfmStatsEntry 3 }
hwDot3ahEfmUniqueEventNotificationRx OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of unique Event OAMPDUs received on
this interface. Event notification OAMPDUs may be sent in
duplicate to increase the probability of successfully being
received, given the possibility that a frame may be lost in
transit. Duplicate Event Notification receptions are counted
by hwDot3ahEfmDuplicateEventNotificationRx.
A unique Event Notification OAMPDU is indicated as an Event
Notification OAMPDU with a Sequence Number field that is
distinct from the previously received Event Notification
OAMPDU Sequence Number.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.
"
REFERENCE
"[802.3ah], 30.3.6.1.24."
::= { hwDot3ahEfmStatsEntry 4 }
hwDot3ahEfmDuplicateEventNotificationTx OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of duplicate Event OAMPDUs transmitted
on this interface. Event notification OAMPDUs may be sent in
duplicate to increase the probability of successfully being
received, given the possibility that a frame may be lost in
transit.
A duplicate Event Notification OAMPDU is indicated as an Event
Notification OAMPDU with a Sequence Number field that is
identical to the previously transmitted Event Notification
OAMPDU Sequence Number.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.
"
REFERENCE
"[802.3ah], 30.3.6.1.23."
::= { hwDot3ahEfmStatsEntry 5 }
hwDot3ahEfmDuplicateEventNotificationRx OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of duplicate Event OAMPDUs received on
this interface. Event notification OAMPDUs may be sent in
duplicate to increase the probability of successfully being
received, given the possibility that a frame may be lost in
transit.
A duplicate Event Notification OAMPDU is indicated as an Event
Notification OAMPDU with a Sequence Number field that is
identical to the previously received Event Notification OAMPDU
Sequence Number.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.
"
REFERENCE
"[802.3ah], 30.3.6.1.25."
::= { hwDot3ahEfmStatsEntry 6 }
hwDot3ahEfmLoopbackControlTx OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of Loopback Control OAMPDUs transmitted
on this interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.
"
REFERENCE
"[802.3ah], 30.3.6.1.26."
::= { hwDot3ahEfmStatsEntry 7 }
hwDot3ahEfmLoopbackControlRx OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of Loopback Control OAMPDUs received
on this interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.
"
REFERENCE
"[802.3ah], 30.3.6.1.27."
::= { hwDot3ahEfmStatsEntry 8 }
hwDot3ahEfmVariableRequestTx OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of Variable Request OAMPDUs transmitted
on this interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.
"
REFERENCE
"[802.3ah], 30.3.6.1.28."
::= { hwDot3ahEfmStatsEntry 9 }
hwDot3ahEfmVariableRequestRx OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of Variable Request OAMPDUs received on
this interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.
"
REFERENCE
"[802.3ah], 30.3.6.1.29."
::= { hwDot3ahEfmStatsEntry 10 }
hwDot3ahEfmVariableResponseTx OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of Variable Response OAMPDUs
transmitted on this interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.
"
REFERENCE
"[802.3ah], 30.3.6.1.30."
::= { hwDot3ahEfmStatsEntry 11 }
hwDot3ahEfmVariableResponseRx OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of Variable Response OAMPDUs received
on this interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.
"
REFERENCE
"[802.3ah], 30.3.6.1.31."
::= { hwDot3ahEfmStatsEntry 12 }
hwDot3ahEfmOrgSpecificTx OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of Organization Specific OAMPDUs
transmitted on this interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.
"
REFERENCE
"[802.3ah], 30.3.6.1.32."
::= { hwDot3ahEfmStatsEntry 13 }
hwDot3ahEfmOrgSpecificRx OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of Organization Specific OAMPDUs
received on this interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.
"
REFERENCE
"[802.3ah], 30.3.6.1.33."
::= { hwDot3ahEfmStatsEntry 14 }
hwDot3ahEfmUnsupportedCodesTx OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of OAMPDUs transmitted on this
interface with an unsupported op-code.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.
"
REFERENCE
"[802.3ah], 30.3.6.1.18."
::= { hwDot3ahEfmStatsEntry 15 }
hwDot3ahEfmUnsupportedCodesRx OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of OAMPDUs received on this interface
with an unsupported op-code.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.
"
REFERENCE
"[802.3ah], 30.3.6.1.19."
::= { hwDot3ahEfmStatsEntry 16 }
hwDot3ahEfmFramesLostDueToOam OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of frames that were dropped by the OAM
multiplexer. Since the OAM multiplexer has multiple inputs
and a single output, there may be cases where frames are
dropped due to transmit resource contention. This counter is
incremented whenever a frame is dropped by the OAM layer.
Note that any Ethernet frame, not just OAMPDUs, may be dropped
by the OAM layer. This can occur when an OAMPDU takes
precedence over a 'normal' frame resulting in the 'normal'
frame being dropped.
When this counter is incremented, no other counters in this
MIB are incremented.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.
"
REFERENCE
"[802.3ah], 30.3.6.1.46."
::= { hwDot3ahEfmStatsEntry 17 }
-- ***************************************************************
--
-- Ethernet OAM Event Configuration group
--
hwDot3ahEfmEventConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDot3ahEfmEventConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ethernet OAM includes the ability to generate and receive
Event Notification OAMPDUs to indicate various link problems.
This table contains the mechanisms to enable Event
Notifications and configure the thresholds to generate the
standard Ethernet OAM events. There is one entry in the table
for every entry in hwDot3ahEfmTable that supports OAM events
(where hwDot3ahEfmFunctionsSupported includes the eventSupport
bit set). The values in the table are maintained across
changes to hwDot3ahEfmOperStatus.
The standard threshold crossing events are:
- Errored Symbol Period Event. Generated when the number of
symbol errors exceeds a threshold within a given window
defined by a number of symbols (for example, 1,000 symbols
out of 1,000,000 had errors).
- Errored Frame Period Event. Generated when the number of
frame errors exceeds a threshold within a given window
defined by a number of frames (for example, 10 frames out
of 1000 had errors).
- Errored Frame Event. Generated when the number of frame
errors exceeds a threshold within a given window defined
by a period of time (for example, 10 frames in 1 second
had errors).
- Errored Frame Seconds Summary Event. Generated when the
number of errored frame seconds exceeds a threshold within
a given time period (for example, 10 errored frame seconds
within the last 100 seconds). An errored frame second is
defined as a 1 second interval which had >0 frame errors.
There are other events (dying gasp, critical events) that are
not threshold crossing events but which can be
enabled/disabled via this table.
"
::= { hwDot3ahEfmObject 6 }
hwDot3ahEfmEventConfigEntry OBJECT-TYPE
SYNTAX HwDot3ahEfmEventConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries are automatically created and deleted from this
table, and exist whenever the OAM entity supports Ethernet OAM
events (as indicated by the eventSupport bit in
hwDot3ahEfmFunctionsSuppported). Values in the table are
maintained across changes to the value of hwDot3ahEfmOperStatus.
Event configuration controls when the local management entity
sends Event Notification OAMPDUs to its OAM peer, and when
certain event flags are set or cleared in OAMPDUs.
"
INDEX { ifIndex }
::= { hwDot3ahEfmEventConfigTable 1 }
HwDot3ahEfmEventConfigEntry ::=
SEQUENCE {
hwDot3ahEfmErrSymPeriodWindowHi
Unsigned32,
hwDot3ahEfmErrSymPeriodWindowLo
Unsigned32,
hwDot3ahEfmErrSymPeriodThresholdHi
Unsigned32,
hwDot3ahEfmErrSymPeriodThresholdLo
Unsigned32,
hwDot3ahEfmErrSymPeriodEvNotifEnable
TruthValue,
hwDot3ahEfmErrFramePeriodWindow
Unsigned32,
hwDot3ahEfmErrFramePeriodThreshold
Unsigned32,
hwDot3ahEfmErrFramePeriodEvNotifEnable
TruthValue,
hwDot3ahEfmErrFrameWindow
Unsigned32,
hwDot3ahEfmErrFrameThreshold
Unsigned32,
hwDot3ahEfmErrFrameEvNotifEnable
TruthValue,
hwDot3ahEfmErrFrameSecsSummaryWindow
Integer32,
hwDot3ahEfmErrFrameSecsSummaryThreshold
Integer32,
hwDot3ahEfmErrFrameSecsEvNotifEnable
TruthValue,
hwDot3ahEfmDyingGaspEnable
TruthValue,
hwDot3ahEfmCriticalEventEnable
TruthValue,
hwDot3ahEfmThresholdTriggerErrDown
EnabledStatus
}
hwDot3ahEfmErrSymPeriodWindowHi OBJECT-TYPE
SYNTAX Unsigned32
UNITS "2^32 symbols"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The two objects hwDot3ahEfmErrSymPeriodWindowHi and
hwDot3ahEfmErrSymPeriodWindowLo together form an unsigned 64-bit
integer representing the number of symbols over which this
threshold event is defined. This is defined as
hwDot3ahEfmErrSymPeriodWindow = ((2^32)*hwDot3ahEfmErrSymPeriodWindowHi)
+ hwDot3ahEfmErrSymPeriodWindowLo
If hwDot3ahEfmErrSymPeriodThreshold symbol errors occur within a
window of hwDot3ahEfmErrSymPeriodWindow symbols, an Event
Notification OAMPDU should be generated with an Errored Symbol
Period Event TLV indicating the threshold has been crossed in
this window.
The default value for hwDot3ahEfmErrSymPeriodWindow is the number
of symbols in one second for the underlying physical layer.
"
REFERENCE
"[802.3ah], 30.3.6.1.34"
::= { hwDot3ahEfmEventConfigEntry 1 }
hwDot3ahEfmErrSymPeriodWindowLo OBJECT-TYPE
SYNTAX Unsigned32
UNITS "symbols"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The two objects hwDot3ahEfmErrSymPeriodWindowHi and
hwDot3ahEfmErrSymPeriodWindowLo together form an unsigned 64-bit
integer representing the number of symbols over which this
threshold event is defined. This is defined as
hwDot3ahEfmErrSymPeriodWindow = ((2^32)*hwDot3ahEfmErrSymPeriodWindowHi)
+ hwDot3ahEfmErrSymPeriodWindowLo
If hwDot3ahEfmErrSymPeriodThreshold symbol errors occur within a
window of hwDot3ahEfmErrSymPeriodWindow symbols, an Event
Notification OAMPDU should be generated with an Errored Symbol
Period Event TLV indicating the threshold has been crossed in
this window.
The default value for hwDot3ahEfmErrSymPeriodWindow is the number
of symbols in one second for the underlying physical layer.
"
REFERENCE
"[802.3ah], 30.3.6.1.34"
::= { hwDot3ahEfmEventConfigEntry 2 }
hwDot3ahEfmErrSymPeriodThresholdHi OBJECT-TYPE
SYNTAX Unsigned32
UNITS "2^32 symbols"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The two objects hwDot3ahEfmErrSymPeriodThresholdHi and
hwDot3ahEfmErrSymPeriodThresholdLo together form an unsigned
64-bit integer representing the number of symbol errors that
must occur within a given window to cause this event.
This is defined as
hwDot3ahEfmErrSymPeriodThreshold =
((2^32) * hwDot3ahEfmErrSymPeriodThresholdHi)
+ hwDot3ahEfmErrSymPeriodThresholdLo
If hwDot3ahEfmErrSymPeriodThreshold symbol errors occur within a
window of hwDot3ahEfmErrSymPeriodWindow symbols, an Event
Notification OAMPDU should be generated with an Errored Symbol
Period Event TLV indicating the threshold has been crossed in
this window.
The default value for hwDot3ahEfmErrSymPeriodThreshold is one
symbol errors. If the threshold value is zero, then an Event
Notification OAMPDU is sent periodically (at the end of every
window). This can be used as an asynchronous notification to
the peer OAM entity of the statistics related to this
threshold crossing alarm.
"
REFERENCE
"[802.3ah], 30.3.6.1.34"
::= { hwDot3ahEfmEventConfigEntry 3 }
hwDot3ahEfmErrSymPeriodThresholdLo OBJECT-TYPE
SYNTAX Unsigned32
UNITS "symbols"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The two objects hwDot3ahEfmErrSymPeriodThresholdHi and
hwDot3ahEfmErrSymPeriodThresholdLo together form an unsigned
64-bit integer representing the number of symbol errors that
must occur within a given window to cause this event.
This is defined as
hwDot3ahEfmErrSymPeriodThreshold =
((2^32) * hwDot3ahEfmErrSymPeriodThresholdHi)
+ hwDot3ahEfmErrSymPeriodThresholdLo
If hwDot3ahEfmErrSymPeriodThreshold symbol errors occur within a
window of hwDot3ahEfmErrSymPeriodWindow symbols, an Event
Notification OAMPDU should be generated with an Errored Symbol
Period Event TLV indicating the threshold has been crossed in
this window.
The default value for hwDot3ahEfmErrSymPeriodThreshold is one
symbol error. If the threshold value is zero, then an Event
Notification OAMPDU is sent periodically (at the end of every
window). This can be used as an asynchronous notification to
the peer OAM entity of the statistics related to this
threshold crossing alarm.
"
REFERENCE
"[802.3ah], 30.3.6.1.34"
::= { hwDot3ahEfmEventConfigEntry 4 }
hwDot3ahEfmErrSymPeriodEvNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, the OAM entity should send an Event Notification
OAMPDU when an Errored Symbol Period Event occurs.
By default, this object should have the value true for
Ethernet like interfaces that support OAM. If the OAM layer
does not support event notifications (as indicated via the
hwDot3ahEfmFunctionsSupported attribute), this value is ignored.
"
::= { hwDot3ahEfmEventConfigEntry 5 }
hwDot3ahEfmErrFramePeriodWindow OBJECT-TYPE
SYNTAX Unsigned32
UNITS "frames"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of frames over which the threshold is defined.
The default value of the window is the number of minimum size
Ethernet frames that can be received over the physical layer
in one second.
If hwDot3ahEfmErrFramePeriodThreshold frame errors occur within a
window of hwDot3ahEfmErrFramePeriodWindow frames, an Event
Notification OAMPDU should be generated with an Errored Frame
Period Event TLV indicating the threshold has been crossed in
this window.
"
REFERENCE
"[802.3ah], 30.3.6.1.38"
::= { hwDot3ahEfmEventConfigEntry 6 }
hwDot3ahEfmErrFramePeriodThreshold OBJECT-TYPE
SYNTAX Unsigned32
UNITS "frames"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of frame errors that must occur for this event to
be triggered. The default value is one frame error. If the
threshold value is zero, then an Event Notification OAMPDU is
sent periodically (at the end of every window). This can be
used as an asynchronous notification to the peer OAM entity of
the statistics related to this threshold crossing alarm.
If hwDot3ahEfmErrFramePeriodThreshold frame errors occur within a
window of hwDot3ahEfmErrFramePeriodWindow frames, an Event
Notification OAMPDU should be generated with an Errored Frame
Period Event TLV indicating the threshold has been crossed in
this window.
"
REFERENCE
"[802.3ah], 30.3.6.1.38"
::= { hwDot3ahEfmEventConfigEntry 7 }
hwDot3ahEfmErrFramePeriodEvNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, the OAM entity should send an Event Notification
OAMPDU when an Errored Frame Period Event occurs.
By default, this object should have the value true for
Ethernet like interfaces that support OAM. If the OAM layer
does not support event notifications (as indicated via the
hwDot3ahEfmFunctionsSupported attribute), this value is ignored.
"
::= { hwDot3ahEfmEventConfigEntry 8 }
hwDot3ahEfmErrFrameWindow OBJECT-TYPE
SYNTAX Unsigned32
UNITS "tenths of a second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of time (in 100ms increments) over which the
threshold is defined. The default value is 10 (1 second).
If hwDot3ahEfmErrFrameThreshold frame errors occur within a window
of hwDot3ahEfmErrFrameWindow seconds (measured in tenths of
seconds), an Event Notification OAMPDU should be generated
with an Errored Frame Event TLV indicating the threshold has
been crossed in this window.
"
REFERENCE
"[802.3ah], 30.3.6.1.36"
::= { hwDot3ahEfmEventConfigEntry 9 }
hwDot3ahEfmErrFrameThreshold OBJECT-TYPE
SYNTAX Unsigned32
UNITS "frames"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of frame errors that must occur for this event to
be triggered. The default value is one frame error. If the
threshold value is zero, then an Event Notification OAMPDU is
sent periodically (at the end of every window). This can be
used as an asynchronous notification to the peer OAM entity of
the statistics related to this threshold crossing alarm.
If hwDot3ahEfmErrFrameThreshold frame errors occur within a window
of hwDot3ahEfmErrFrameWindow (in tenths of seconds), an Event
Notification OAMPDU should be generated with an Errored Frame
Event TLV indicating the threshold has been crossed in this
window.
"
REFERENCE
"[802.3ah], 30.3.6.1.36"
::= { hwDot3ahEfmEventConfigEntry 10 }
hwDot3ahEfmErrFrameEvNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, the OAM entity should send an Event Notification
OAMPDU when an Errored Frame Event occurs.
By default, this object should have the value true for
Ethernet like interfaces that support OAM. If the OAM layer
does not support event notifications (as indicated via the
hwDot3ahEfmFunctionsSupported attribute), this value is ignored.
"
::= { hwDot3ahEfmEventConfigEntry 11 }
hwDot3ahEfmErrFrameSecsSummaryWindow OBJECT-TYPE
SYNTAX Integer32 (100..9000)
UNITS "tenths of a second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of time (in 100ms intervals) over which the
threshold is defined. The default value is 600 (60 seconds).
If hwDot3ahEfmErrFrameSecsSummaryThreshold frame errors occur
within a window of hwDot3ahEfmErrFrameSecsSummaryWindow (in tenths
of seconds), an Event Notification OAMPDU should be generated
with an Errored Frame Seconds Summary Event TLV indicating the
threshold has been crossed in this window.
"
REFERENCE
"[802.3ah], 30.3.6.1.40"
::= { hwDot3ahEfmEventConfigEntry 12 }
hwDot3ahEfmErrFrameSecsSummaryThreshold OBJECT-TYPE
SYNTAX Integer32 (0..900)
UNITS "errored frame seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of errored frame seconds that must occur for this
event to be triggered. The default value is one errored frame
second. If the threshold value is zero, then an Event
Notification OAMPDU is sent periodically (at the end of every
window). This can be used as an asynchronous notification to
the peer OAM entity of the statistics related to this
threshold crossing alarm.
If hwDot3ahEfmErrFrameSecsSummaryThreshold frame errors occur
within a window of hwDot3ahEfmErrFrameSecsSummaryWindow (in tenths
of seconds), an Event Notification OAMPDU should be generated
with an Errored Frame Seconds Summary Event TLV indicating the
threshold has been crossed in this window.
"
REFERENCE
"[802.3ah], 30.3.6.1.40"
::= { hwDot3ahEfmEventConfigEntry 13 }
hwDot3ahEfmErrFrameSecsEvNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, the local OAM entity should send an Event
Notification OAMPDU when an Errored Frame Seconds Event
occurs.
By default, this object should have the value true for
Ethernet like interfaces that support OAM. If the OAM layer
does not support event notifications (as indicated via the
hwDot3ahEfmFunctionsSupported attribute), this value is ignored.
"
::= { hwDot3ahEfmEventConfigEntry 14 }
hwDot3ahEfmDyingGaspEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, the local OAM entity should attempt to indicate a
dying gasp via the OAMPDU flags field to its peer OAM entity
when a dying gasp event occurs. The exact definition of a
dying gasp event is implementation dependent. If the system
does not support dying gasp capability, setting this object
has no effect, and reading the object should always result in
'false'.
By default, this object should have the value true for
Ethernet like interfaces that support OAM. If the OAM layer
does not support event notifications (as indicated via the
hwDot3ahEfmFunctionsSupported attribute), this value is ignored.
"
::= { hwDot3ahEfmEventConfigEntry 15 }
hwDot3ahEfmCriticalEventEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, the local OAM entity should attempt to indicate a
critical event via the OAMPDU flags to its peer OAM entity
when a critical event occurs. The exact definition of a
critical event is implementation dependent. If the system
does not support critical event capability, setting this
object has no effect, and reading the object should always
result in 'false'.
By default, this object should have the value true for
Ethernet like interfaces that support OAM. If the OAM layer
does not support event notifications (as indicated via the
hwDot3ahEfmFunctionsSupported attribute), this value is ignored.
"
::= { hwDot3ahEfmEventConfigEntry 16 }
hwDot3ahEfmThresholdTriggerErrDown OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether threshold event will trigger error-shutdown.
If it is enabled(1), after EFM checks that the threshold event happens,
the current interface will be set to administrative down.
The default value is disabled(2).
"
::= { hwDot3ahEfmEventConfigEntry 17 }
-- **************************************************************
--
-- Ethernet OAM Event Log group
--
hwDot3ahEfmEventLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDot3ahEfmEventLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table records a history of the events that have occurred
at the Ethernet OAM level. These events can include locally
detected events, which may result in locally generated
OAMPDUs, and remotely detected events, which are detected by
the OAM peer entity and signaled to the local entity via
Ethernet OAM. Ethernet OAM events can be signaled by Event
Notification OAMPDUs or by the flags field in any OAMPDU.
This table contains both threshold crossing events and
non-threshold crossing events. The parameters for the
threshold window, threshold value, and actual value
(hwDot3ahEfmEventLogWindowXX, hwDot3ahEfmEventLogThresholdXX,
hwDot3ahEfmEventLogValue) are only applicable to threshold
crossing events, and are returned as all F's (2^32 - 1) for
non-threshold crossing events.
Entries in the table are automatically created when such
events are detected. The size of the table is implementation
dependent. When the table reaches its maximum size, older
entries are automatically deleted to make room for newer
entries.
"
::= { hwDot3ahEfmObject 7 }
hwDot3ahEfmEventLogEntry OBJECT-TYPE
SYNTAX HwDot3ahEfmEventLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the hwDot3ahEfmEventLogTable. Entries are
automatically created whenever Ethernet OAM events occur at
the local OAM entity, and when Event Notification OAMPDUs are
received at the local OAM entity (indicating events have
occurred at the peer OAM entity). The size of the table is
implementation dependent, but when the table becomes full,
older events are automatically deleted to make room for newer
events. The table index hwDot3ahEfmEventLogIndex increments for
each new entry, and when the maximum value is reached the
value restarts at zero.
"
INDEX { ifIndex, hwDot3ahEfmEventLogIndex }
::= { hwDot3ahEfmEventLogTable 1 }
HwDot3ahEfmEventLogEntry ::=
SEQUENCE {
hwDot3ahEfmEventLogIndex
Unsigned32,
hwDot3ahEfmEventLogTimestamp
TimeStamp,
hwDot3ahEfmEventLogOui
HWDot3Oui,
hwDot3ahEfmEventLogType
Unsigned32,
hwDot3ahEfmEventLogLocation
INTEGER,
hwDot3ahEfmEventLogWindowHi
Unsigned32,
hwDot3ahEfmEventLogWindowLo
Unsigned32,
hwDot3ahEfmEventLogThresholdHi
Unsigned32,
hwDot3ahEfmEventLogThresholdLo
Unsigned32,
hwDot3ahEfmEventLogValue
CounterBasedGauge64,
hwDot3ahEfmEventLogRunningTotal
CounterBasedGauge64,
hwDot3ahEfmEventLogEventTotal
Unsigned32
}
hwDot3ahEfmEventLogIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer for identifying individual events
within the event log. "
::= { hwDot3ahEfmEventLogEntry 1 }
hwDot3ahEfmEventLogTimestamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time of the logged event. For
locally generated events, the time of the event can be
accurately retrieved from sysUpTime. For remotely generated
events, the time of the event is indicated by the reception of
the Event Notification OAMPDU indicating the event occurred on
the peer. A system may attempt to adjust the timestamp value
to more accurately reflect the time of the event at the peer
OAM entity by using other information, such as that found in
the timestamp found of the Event Notification TLVs, which
provides an indication of the relative time between events at
the peer entity. "
::= { hwDot3ahEfmEventLogEntry 2 }
hwDot3ahEfmEventLogOui OBJECT-TYPE
SYNTAX HWDot3Oui
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OUI of the entity defining the object type. All IEEE
802.3 defined events (as appearing in [802.3ah] except for the
Organizationally Unique Event TLVs) use the IEEE 802.3 OUI of
0x0180C2. Organizations defining their own Event Notification
TLVs include their OUI in the Event Notification TLV which
gets reflected here. "
::= { hwDot3ahEfmEventLogEntry 3 }
hwDot3ahEfmEventLogType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of event that generated this entry in the event log.
When the OUI is the IEEE 802.3 OUI of 0x0180C2, the following
event types are defined:
erroredSymbolEvent(1),
erroredFrameEvent(2),
erroredFramePeriodEvent(3),
erroredFrameSecondsEvent(4),
lostlink(254),
linkFault(256),
dyingGaspEvent(257),
criticalLinkEvent(258)
The first four are considered threshold crossing events as
they are generated when a metric exceeds a given value within
a specified window. The other three are not threshold
crossing events.
When the OUI is not 71874 (0x0180C2 in hex), then some other
organization has defined the event space. If event subtyping
is known to the implementation, it may be reflected here.
Otherwise, this value should return all Fs (2^32 - 1).
"
REFERENCE
"[802.3ah], 30.3.6.1.10 and 57.5.3."
::= { hwDot3ahEfmEventLogEntry 4 }
hwDot3ahEfmEventLogLocation OBJECT-TYPE
SYNTAX INTEGER
{
local(1),
remote(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether this event occurred locally (local(1)), or was
received from the OAM peer via Ethernet OAM (remote(2)).
"
::= { hwDot3ahEfmEventLogEntry 5 }
hwDot3ahEfmEventLogWindowHi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the event represents a threshold crossing event, the two
objects hwDot3ahEfmEventWindowHi and hwDot3ahEfmEventWindowLo form an
unsigned 64-bit integer yielding the window over which the
value was measured for the threshold crossing event (for
example, 5, when 11 occurrences happened in 5 seconds while
the threshold was 10). The two objects are combined as:
hwDot3ahEfmEventLogWindow = ((2^32) * hwDot3ahEfmEventLogWindowHi)
+ hwDot3ahEfmEventLogWindowLo
Otherwise, this value is returned as all F's (2^32 - 1) and
adds no useful information.
"
REFERENCE
"[802.3ah], 30.3.6.1.37 and 57.5.3.2."
::= { hwDot3ahEfmEventLogEntry 6 }
hwDot3ahEfmEventLogWindowLo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the event represents a threshold crossing event, the two
objects hwDot3ahEfmEventWindowHi and hwDot3ahEfmEventWindowLo form an
unsigned 64-bit integer yielding the window over which the
value was measured for the threshold crossing event (for
example, 5, when 11 occurrences happened in 5 seconds while
the threshold was 10). The two objects are combined as:
hwDot3ahEfmEventLogWindow = ((2^32) * hwDot3ahEfmEventLogWindowHi)
+ hwDot3ahEfmEventLogWindowLo
Otherwise, this value is returned as all F's (2^32 - 1) and
adds no useful information.
"
REFERENCE
"[802.3ah], 30.3.6.1.37 and 57.5.3.2."
::= { hwDot3ahEfmEventLogEntry 7 }
hwDot3ahEfmEventLogThresholdHi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the event represents a threshold crossing event, the two
objects hwDot3ahEfmEventThresholdHi and hwDot3ahEfmEventThresholdLo
form an unsigned 64-bit integer yielding the value that was
crossed for the threshold crossing event (for example, 10,
when 11 occurrences happened in 5 seconds while the threshold
was 10). The two objects are combined as:
hwDot3ahEfmEventLogThreshold = ((2^32) * hwDot3ahEfmEventLogThresholdHi)
+ hwDot3ahEfmEventLogThresholdLo
Otherwise, this value is returned as all F's (2^32 -1) and
adds no useful information.
"
REFERENCE
"[802.3ah], 30.3.6.1.37 and 57.5.3.2."
::= { hwDot3ahEfmEventLogEntry 8 }
hwDot3ahEfmEventLogThresholdLo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the event represents a threshold crossing event, the two
objects hwDot3ahEfmEventThresholdHi and hwDot3ahEfmEventThresholdLo
form an unsigned 64-bit integer yielding the value that was
crossed for the threshold crossing event (for example, 10,
when 11 occurrences happened in 5 seconds while the threshold
was 10). The two objects are combined as:
hwDot3ahEfmEventLogThreshold = ((2^32) * hwDot3ahEfmEventLogThresholdHi)
+ hwDot3ahEfmEventLogThresholdLo
Otherwise, this value is returned as all F's (2^32 - 1) and
adds no useful information.
"
REFERENCE
"[802.3ah], 30.3.6.1.37 and 57.5.3.2."
::= { hwDot3ahEfmEventLogEntry 9 }
hwDot3ahEfmEventLogValue OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the event represents a threshold crossing event, this
value indicates the value of the parameter within the given
window that generated this event (for example, 11, when 11
occurrences happened in 5 seconds while the threshold was 10).
Otherwise, this value is returned as all F's
(2^64 - 1) and adds no useful information.
"
REFERENCE
"[802.3ah], 30.3.6.1.37 and 57.5.3.2."
::= { hwDot3ahEfmEventLogEntry 10 }
hwDot3ahEfmEventLogRunningTotal OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Each Event Notification TLV contains a running total of the
number of times an event has occurred, as well as the number
of times an Event Notification for the event has been
transmitted. For non-threshold crossing events, the number of
events (hwDot3ahEfmLogRunningTotal) and the number of resultant
Event Notifications (hwDot3ahEfmLogEventTotal) should be
identical.
For threshold crossing events, since multiple occurrences may
be required to cross the threshold, these values are likely
different. This value represents the total number of times
this event has happened since the last reset (for example,
3253, when 3253 symbol errors have occurred since the last
reset, which has resulted in 51 symbol error threshold
crossing events since the last reset).
"
REFERENCE
"[802.3ah], 30.3.6.1.37 and 57.5.3.2."
::= { hwDot3ahEfmEventLogEntry 11 }
hwDot3ahEfmEventLogEventTotal OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Each Event Notification TLV contains a running total of the
number of times an event has occurred, as well as the number
of times an Event Notification for the event has been
transmitted. For non-threshold crossing events, the number of
events (hwDot3ahEfmLogRunningTotal) and the number of resultant
Event Notifications (hwDot3ahEfmLogEventTotal) should be
identical.
For threshold crossing events, since multiple occurrences may
be required to cross the threshold, these values are likely
different. This value represents the total number of times
one or more of these occurrences have resulted in an Event
Notification (for example, 51 when 3253 symbol errors have
occurred since the last reset, which has resulted in 51 symbol
error threshold crossing events since the last reset).
"
REFERENCE
"[802.3ah], 30.3.6.1.37 and 57.5.3.2."
::= { hwDot3ahEfmEventLogEntry 12 }
hwDot3ahEfmManagerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDot3ahEfmManagerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains configurations of binding relationships
between EFM and other modules.
"
::= { hwDot3ahEfmObject 8 }
hwDot3ahEfmManagerEntry OBJECT-TYPE
SYNTAX HwDot3ahEfmManagerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry contains configurations of binding relationships
between EFM and other modules.
"
INDEX { ifIndex }
::= { hwDot3ahEfmManagerTable 1 }
HwDot3ahEfmManagerEntry ::=
SEQUENCE {
hwDot3ahEfmTriggerIfDown
EnabledStatus,
hwDot3ahEfmHoldUpTime
Integer32
}
hwDot3ahEfmTriggerIfDown OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether EFM is bound to the interface.
If it is enabled(1), after EFM checks that the link times out,
the current Ethernet interface link state will be set to block (EFM
down),and all the data except the OAMPDU is blocked.
The default value is disabled(2).
"
::= { hwDot3ahEfmManagerEntry 1 }
hwDot3ahEfmHoldUpTime OBJECT-TYPE
SYNTAX Integer32 (0..50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the time elapsed an EFM interface is
in the faulty state. The value ranges from 0 to 50 in seconds.
The default value is 0.
"
::= { hwDot3ahEfmManagerEntry 2 }
-- Ethernet OAM EVRRP group
-- add by liujin 64168 2008-9-25
hwDot3ahEvrrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDot3ahEvrrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about the OAM Evrrp project for
a particular Ethernet like interface.
"
::= { hwDot3ahEfmObject 9 }
hwDot3ahEvrrpEntry OBJECT-TYPE
SYNTAX HwDot3ahEvrrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table of hwDot3ahEvrrpTable, containing information on
the OAM Evrrp entity for a single Ethernet like interface.
Note that there is at most one OAM Evrrp for each Ethernet like
interface.
"
INDEX { ifIndex }
::= { hwDot3ahEvrrpTable 1 }
HwDot3ahEvrrpEntry ::=
SEQUENCE {
hwDot3ahEvrrpCpuState INTEGER,
hwDot3ahEvrrpTriggerIfDown EnabledStatus,
hwDot3ahEvrrpHoldUpTime Integer32
}
hwDot3ahEvrrpCpuState OBJECT-TYPE
SYNTAX INTEGER {
master(1),
slave(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the state in the OAMPDU which sended by
the peer interface.
If it is master(1), EFM will make the link work as the master
state. And if it is slave(2), EFM will make the link works as
the slave chain link.
The default state is unknown(3). That means the peer interface
didn't send any OAMPDU which contains the state of link status.
"
::= { hwDot3ahEvrrpEntry 1 }
hwDot3ahEvrrpTriggerIfDown OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This object indicates whether EFM is bound to the interface.
If it is enabled(1), after EFM checks that the link times out,
the current Ethernet interface link state will be set to EFM
down. And all of the PDU operation will be stop.
The default value is disabled(2).
"
::= { hwDot3ahEvrrpEntry 2 }
hwDot3ahEvrrpHoldUpTime OBJECT-TYPE
SYNTAX Integer32 (0..50)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This object specifies the time elapsed an EFM interface is
in the faulty state. The value ranges from 0 to 50 in seconds.
The default value is 0.
"
::= { hwDot3ahEvrrpEntry 3 }
-- ----------------------------------------------------------------------------
-- END for EVRRP
-- ----------------------------------------------------------------------------
hwOamManager OBJECT IDENTIFIER ::= { hwEthOamMib 3 }
hwTestMessage OBJECT IDENTIFIER ::= { hwEthOamMib 4 }
hwTestMessageObject OBJECT IDENTIFIER ::= { hwTestMessage 1 }
-- hwTestMessageTableNextIndex
hwTestMessageTableNextIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Search the next hwTestMessageTable instance.
"
::= { hwTestMessageObject 1 }
-- hwDot3ahEfmDetectModeTable
hwTestMessageTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwTestMessageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The definition of the tested packets format and the transmission of the tested packets
"
::= { hwTestMessageObject 2 }
hwTestMessageEntry OBJECT-TYPE
SYNTAX HwTestMessageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for Test Message Table."
INDEX { hwTestMessageIndex }
::= { hwTestMessageTable 1 }
HwTestMessageEntry ::=
SEQUENCE {
hwTestMessageIndex
Unsigned32,
hwTestMessageMacAddress
MacAddress,
hwTestMessageVlanID
Unsigned32,
hwTestMessageInterface
OCTET STRING,
hwTestMessageServiceInstance
OCTET STRING,
hwTestMessagePacketSize
Unsigned32,
hwTestMessageSendPackets
Unsigned32,
hwTestMessageSendSpeed
HWTestMessageSendSpeed,
hwTestMessageSendEnabled
TruthValue,
hwTestMessageSendFinished
HWTestMessageFinishedValue,
hwTestMessageRowStatus
RowStatus
}
hwTestMessageIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Set the index for the tested packets table
"
::= { hwTestMessageEntry 1 }
hwTestMessageMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
The destination MAC address
"
::= { hwTestMessageEntry 11 }
hwTestMessageVlanID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
VLAN index
"
::= { hwTestMessageEntry 12 }
hwTestMessageInterface OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
If the interface is specified, specify the interface name.
"
::= { hwTestMessageEntry 13 }
hwTestMessageServiceInstance OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Name of the service instance
"
::= { hwTestMessageEntry 14 }
hwTestMessagePacketSize OBJECT-TYPE
SYNTAX Unsigned32 (64..1518)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
The length of the sent tested packets ranges from 64 to 1518 in byte, and the default value is 64.
"
DEFVAL { 64 }
::= { hwTestMessageEntry 15 }
hwTestMessageSendPackets OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
The number of the sent tested packets ranges from 1 to 65535 in integer, and the default value is 5.
"
DEFVAL { 5 }
::= { hwTestMessageEntry 16 }
hwTestMessageSendSpeed OBJECT-TYPE
SYNTAX HWTestMessageSendSpeed
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Enumerated type indicates the rate of sending the packets: oneMbps and fiveMbps. The default is oneMbps.
"
DEFVAL { oneMbps }
::= { hwTestMessageEntry 17 }
hwTestMessageSendEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
The sending and termination of the tested packets
"
::= { hwTestMessageEntry 18 }
hwTestMessageSendFinished OBJECT-TYPE
SYNTAX HWTestMessageFinishedValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
View whether the tested packets are stopped to be sent:
1, 2, 3, 4, and 5 indicate that has not run/is running/the previous test terminates normally/the previous test terminates abnormally/the previous test is interrupted (through ctrl+c or mib)
"
::= { hwTestMessageEntry 19 }
hwTestMessageRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
The status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.
"
::= { hwTestMessageEntry 51 }
hwTestMessageResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwTestMessageResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
View the returned results after tests
"
::= { hwTestMessageObject 3 }
hwTestMessageResultEntry OBJECT-TYPE
SYNTAX HwTestMessageResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for Test Message Table."
INDEX { hwTestMessageIndex }
::= { hwTestMessageResultTable 1 }
HwTestMessageResultEntry ::=
SEQUENCE {
hwTestMessageResultSendPackets
Unsigned32,
hwTestMessageResultReceivedPackets
Unsigned32,
hwTestMessageResultPacketsLost
Unsigned32,
hwTestMessageResultSendBytes
Unsigned32,
hwTestMessageResultReceivedBytes
Unsigned32,
hwTestMessageResultBytesLost
Unsigned32,
hwTestMessageBeginTimeStamp
TimeStamp,
hwTestMessageEndTimeStamp
TimeStamp
}
hwTestMessageResultSendPackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of the sent packets
"
::= { hwTestMessageResultEntry 11 }
hwTestMessageResultReceivedPackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of the received packets
"
::= { hwTestMessageResultEntry 12 }
hwTestMessageResultPacketsLost OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Packets loss ratio
"
::= { hwTestMessageResultEntry 13 }
hwTestMessageResultSendBytes OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of the sent bytes
"
::= { hwTestMessageResultEntry 14 }
hwTestMessageResultReceivedBytes OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of the received bytes
"
::= { hwTestMessageResultEntry 15 }
hwTestMessageResultBytesLost OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of the lost bytes
"
::= { hwTestMessageResultEntry 16 }
hwTestMessageBeginTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The time of starting the Test operation
"
::= { hwTestMessageResultEntry 17 }
hwTestMessageEndTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The time of ending the Test operation
"
::= { hwTestMessageResultEntry 18 }
hwEthOamTraps OBJECT IDENTIFIER ::= { hwEthOamMib 6 }
-- ******************************************************************
-- NOTIFICATIONS (TRAPS)
-- These notifications will be sent to the management entity
-- whenever a MEP loses/restores contact with one or more other MEPs.
-- ******************************************************************
hwDot1agCfmFaultAlarm NOTIFICATION-TYPE
OBJECTS { hwDot1agCfmRMepMacAddress, hwDot1agCfmRMepHighestPrDefect, hwDot1agCfmMdName, hwDot1agCfmMdMdLevel, hwDot1agCfmMaName
}
STATUS current
DESCRIPTION
"A MEP has lost contact with one or more MEPs. A notification
(fault alarm) is sent to the management entity with the OID
of the MEP that has detected the fault.
Whenever a MEP loses contact with one or more other MEPs,
it may or may not generate a Fault Alarm to warn the system
administrator of the problem, as controlled by the MEP
Fault Notification Generator State Machine and associated
Managed Objects. Only the highest-priority defect, as shown
in Table 20-1, is reported in the Fault Alarm.
hwDot1agCfmRMepMacAddress The MAC address of the remote faulty MEP
hwDot1agCfmRMepHighestPrDefect The fault in the highest level
hwDot1agCfmMdName The name of the faulty MD
hwDot1agCfmMdLevel The level of the faulty MD
hwDot1agCfmMaName The name of the faulty MA
"
REFERENCE
"802.1ag clause 12.14.7.7"
::= { hwEthOamTraps 1 }
hwTestMessageFailed NOTIFICATION-TYPE
OBJECTS { hwTestMessageSendFinished }
STATUS obsolete
DESCRIPTION
"
The events after tests are reported.
1,2,3,4, and 5 indicate has not run/is running/the previous test terminates normally/the previous test terminate abnormally/the previous test is interrupted.
(through ctrl+c or mib)
"
REFERENCE
" "
::= { hwEthOamTraps 2 }
hwTestMessageCompleted NOTIFICATION-TYPE
OBJECTS { hwTestMessageSendFinished, hwTestMessageResultSendPackets, hwTestMessageResultReceivedPackets, hwTestMessageResultPacketsLost, hwTestMessageResultSendBytes,
hwTestMessageResultReceivedBytes, hwTestMessageResultBytesLost, hwTestMessageBeginTimeStamp, hwTestMessageEndTimeStamp }
STATUS obsolete
DESCRIPTION
"
After the test is complete, report the results to the network management.
"
REFERENCE
" "
::= { hwEthOamTraps 3 }
-- ***************************************************************
--
-- Ethernet OAM Notifications
--
hwDot3ahEfmThresholdEvent NOTIFICATION-TYPE
OBJECTS { hwDot3ahEfmEventLogTimestamp, hwDot3ahEfmEventLogOui, hwDot3ahEfmEventLogType, hwDot3ahEfmEventLogLocation, hwDot3ahEfmEventLogWindowHi,
hwDot3ahEfmEventLogWindowLo, hwDot3ahEfmEventLogThresholdHi, hwDot3ahEfmEventLogThresholdLo, hwDot3ahEfmEventLogValue, hwDot3ahEfmEventLogRunningTotal,
hwDot3ahEfmEventLogEventTotal }
STATUS current
DESCRIPTION
"A hwDot3ahEfmThresholdEvent notification is sent when a local or
remote threshold crossing event is detected. A local
threshold crossing event is detected by the local entity,
while a remote threshold crossing event is detected by the
reception of an Ethernet OAM Event Notification OAMPDU
indicating a threshold event.
This notification should not be sent more than once per
second.
The OAM entity can be derived from extracting the ifIndex from
the variable bindings. The objects in the notification
correspond to the values in a row instance of in the
hwDot3ahEfmEventLogTable.
The management entity should periodically check
hwDot3ahEfmEventLogTable to detect any missed events."
::= { hwEthOamTraps 4 }
hwDot3ahEfmNonThresholdEvent NOTIFICATION-TYPE
OBJECTS { hwDot3ahEfmEventLogTimestamp, hwDot3ahEfmEventLogOui, hwDot3ahEfmEventLogType, hwDot3ahEfmEventLogLocation}
STATUS current
DESCRIPTION
"A hwDot3ahEfmNonThresholdEvent notification is sent when a local
or remote non-threshold crossing event is detected. A local
event is detected by the local entity, while a remote event is
detected by the reception of an Ethernet OAM Event
Notification OAMPDU indicating a non-threshold crossing event.
This notification should not be sent more than once per
second.
The OAM entity can be derived from extracting the ifIndex from
the variable bindings. The objects in the notification
correspond to the values in a row instance of the
hwDot3ahEfmEventLogTable.
The management entity should periodically check
hwDot3ahEfmEventLogTable to detect any missed events."
::= { hwEthOamTraps 5 }
hwDot3ahEfmRemoteDyingGaspEvent NOTIFICATION-TYPE
OBJECTS { hwDot3ahEfmPeerMacAddress, ifDescr
}
STATUS current
DESCRIPTION
"A hwDot3ahEfmRemoteDyingGaspEvent notification is sent when a remote
Dying-Gasp event is detected. A remote event is detected by
the reception of an Ethernet OAM Event Notification OAMPDU
indicating a Dying-Gasp event."
::= { hwEthOamTraps 8 }
hwDot3ahEfmNonThresholdRecovery NOTIFICATION-TYPE
OBJECTS { hwDot3ahEfmEventLogTimestamp, hwDot3ahEfmEventLogOui, hwDot3ahEfmEventLogType, hwDot3ahEfmEventLogLocation}
STATUS current
DESCRIPTION
"A hwDot3ahEfmNonThresholdRecovery notification is sent when a hwDot3ahEfmNonThresholdEvent is recovered."
::= { hwEthOamTraps 17 }
hwCfmVlanOnewayDelay NOTIFICATION-TYPE
OBJECTS { hwCfmOneDelayTrapLogMacAddress,
hwCfmVlanOneDelayTrapLogTimestamp, hwCfmVlanOneDelayTrapLogDelayValue,
hwCfmVlanOneDelayTrapLogThreshold }
STATUS current
DESCRIPTION
"
In the VLAN networking, the oneway delay exceeded the trap threshold.
"
::= { hwEthOamTraps 23 }
hwCfmVlanOnewayDelayRecovery NOTIFICATION-TYPE
OBJECTS { hwCfmOneDelayRecoveryTrapMacAddress,
hwCfmVlanOneDelayRecoveryTrapLogTimestamp, hwCfmVlanOneDelayRecoveryTrapLogDelayValue,
hwCfmVlanOneDelayRecoveryTrapLogThreshold }
STATUS current
DESCRIPTION
"
In the VLAN networking, the oneway delay fell below the trap threshold.
"
::= { hwEthOamTraps 24 }
hwCfmVlanTwowayDelay NOTIFICATION-TYPE
OBJECTS { hwCfmTwoDelayTrapMacAddress, hwCfmVlanTwoDelayTrapLogTimestamp,
hwCfmVlanTwoDelayTrapLogDelayValue, hwCfmVlanTwoDelayTrapLogThreshold }
STATUS current
DESCRIPTION
"
In the VLAN networking, the twoway delay exceeded the trap threshold.
"
::= { hwEthOamTraps 25 }
hwCfmVlanTwowayDelayRecovery NOTIFICATION-TYPE
OBJECTS { hwCfmTwoDelayRecoveryTrapMacAddress,
hwCfmVlanTwoDelayRecoveryTrapLogTimestamp,
hwCfmVlanTwoDelayRecoveryTrapLogDelayValue,
hwCfmVlanTwoDelayRecoveryTrapLogThreshold }
STATUS current
DESCRIPTION
"
In the VLAN networking, the twoway delay fell below the trap threshold.
"
::= { hwEthOamTraps 26 }
hwDot3ahEfmLoopbackFailed NOTIFICATION-TYPE
OBJECTS { ifDescr }
STATUS current
DESCRIPTION
"
A hwDot3ahEfmLoopbackFailed notification is sent when failed to start
loopback on a interface.
This notification should not be sent more than once per
second.
"
::= { hwEthOamTraps 29 }
hwY1731AisDefectAlarm NOTIFICATION-TYPE
OBJECTS { hwDot1agCfmMdName, hwDot1agCfmMaName, hwDot1agCfmMepIdentifier}
STATUS current
DESCRIPTION
"AIS status has been entered."
::= { hwEthOamTraps 30 }
hwY1731AisDefectAlarmRecovery NOTIFICATION-TYPE
OBJECTS { hwDot1agCfmMdName, hwDot1agCfmMaName, hwDot1agCfmMepIdentifier}
STATUS current
DESCRIPTION
"AIS status has been existed."
::= { hwEthOamTraps 31 }
hwDot1agCfmUnexpectedMEGLevel NOTIFICATION-TYPE
OBJECTS { hwDot1agCfmMdName, hwDot1agCfmMaName, hwDot1agCfmMepIdentifier }
STATUS current
DESCRIPTION
"Indicates a CCM frame with unexpected MEG level."
::= { hwEthOamTraps 32}
hwDot1agCfmUnexpectedMEGLevelCleared NOTIFICATION-TYPE
OBJECTS { hwDot1agCfmMdName, hwDot1agCfmMaName, hwDot1agCfmMepIdentifier }
STATUS current
DESCRIPTION
"Indicates resuming from receiving a CCM frame with unexpected MEG level."
::= { hwEthOamTraps 33}
hwDot1agCfmMismerge NOTIFICATION-TYPE
OBJECTS { hwDot1agCfmMdName, hwDot1agCfmMaName, hwDot1agCfmMepIdentifier }
STATUS current
DESCRIPTION
"Indicates a CCM frame with unexpected MEG ID"
::= { hwEthOamTraps 34 }
hwDot1agCfmMismergeCleared NOTIFICATION-TYPE
OBJECTS { hwDot1agCfmMdName, hwDot1agCfmMaName, hwDot1agCfmMepIdentifier }
STATUS current
DESCRIPTION
"Indicates resuming from receiving a CCM frame with unexpected MEG ID."
::= { hwEthOamTraps 35 }
hwDot1agCfmUnexpectedMEP NOTIFICATION-TYPE
OBJECTS { hwDot1agCfmMdName, hwDot1agCfmMaName, hwDot1agCfmMepIdentifier }
STATUS current
DESCRIPTION
"Indicates a CCM frame with unexpected MEP ID."
::= { hwEthOamTraps 36 }
hwDot1agCfmUnexpectedMEPCleared NOTIFICATION-TYPE
OBJECTS { hwDot1agCfmMdName, hwDot1agCfmMaName, hwDot1agCfmMepIdentifier }
STATUS current
DESCRIPTION
"Indicates resuming from receiving a CCM frame with unexpected MEP ID."
::= { hwEthOamTraps 37 }
hwDot1agCfmUnexpectedPeriod NOTIFICATION-TYPE
OBJECTS { hwDot1agCfmMdName, hwDot1agCfmMaName, hwDot1agCfmMepIdentifier, hwDot1agCfmRMepIdentifier }
STATUS current
DESCRIPTION
"Indicates a CCM frame with unexpected period."
::= { hwEthOamTraps 38}
hwDot1agCfmUnexpectedPeriodCleared NOTIFICATION-TYPE
OBJECTS { hwDot1agCfmMdName, hwDot1agCfmMaName, hwDot1agCfmMepIdentifier, hwDot1agCfmRMepIdentifier }
STATUS current
DESCRIPTION
"Indicates resuming from receiving a CCM frame with unexpected period."
::= { hwEthOamTraps 39 }
hwDot1agCfmUnexpectedMAC NOTIFICATION-TYPE
OBJECTS { hwDot1agCfmMdName, hwDot1agCfmMaName, hwDot1agCfmMepIdentifier, hwDot1agCfmRMepIdentifier }
STATUS current
DESCRIPTION
"Indicates a CCM frame with unexpected MAC."
::= { hwEthOamTraps 40 }
hwDot1agCfmUnexpectedMACCleared NOTIFICATION-TYPE
OBJECTS { hwDot1agCfmMdName, hwDot1agCfmMaName, hwDot1agCfmMepIdentifier, hwDot1agCfmRMepIdentifier }
STATUS current
DESCRIPTION
"Indicates a CCM frame with unexpected MAC."
::= { hwEthOamTraps 41 }
hwDot1agCfmLOC NOTIFICATION-TYPE
OBJECTS { hwDot1agCfmMdName, hwDot1agCfmMaName, hwDot1agCfmMepIdentifier, hwDot1agCfmRMepIdentifier }
STATUS current
DESCRIPTION
"Indicates that the session losses of continuity."
::= { hwEthOamTraps 42 }
hwDot1agCfmLOCCleared NOTIFICATION-TYPE
OBJECTS { hwDot1agCfmMdName, hwDot1agCfmMaName, hwDot1agCfmMepIdentifier, hwDot1agCfmRMepIdentifier }
STATUS current
DESCRIPTION
"Indicates that the session resumes from lossing of continuity."
::= { hwEthOamTraps 43 }
hwDot1agCfmExceptionalMACStatus NOTIFICATION-TYPE
OBJECTS { hwDot1agCfmMdName, hwDot1agCfmMaName, hwDot1agCfmMepIdentifier, hwDot1agCfmRMepIdentifier }
STATUS current
DESCRIPTION
"Indicates the remote MEP is reporting an error status in its Port Status TLV or Interface Status TLV."
::= { hwEthOamTraps 44 }
hwDot1agCfmExceptionalMACStatusCleared NOTIFICATION-TYPE
OBJECTS { hwDot1agCfmMdName, hwDot1agCfmMaName, hwDot1agCfmMepIdentifier, hwDot1agCfmRMepIdentifier }
STATUS current
DESCRIPTION
"Indicates the remote MEP resumes from an error status indicated in its Port Status TLV or Interface Status TLV."
::= { hwEthOamTraps 45 }
hwDot1agCfmRDI NOTIFICATION-TYPE
OBJECTS { hwDot1agCfmMdName, hwDot1agCfmMaName, hwDot1agCfmMepIdentifier, hwDot1agCfmRMepIdentifier }
STATUS current
DESCRIPTION
"Indicates that MEP receives a CCM frame with the RDI field set."
::= { hwEthOamTraps 46 }
hwDot1agCfmRDICleared NOTIFICATION-TYPE
OBJECTS { hwDot1agCfmMdName, hwDot1agCfmMaName, hwDot1agCfmMepIdentifier, hwDot1agCfmRMepIdentifier }
STATUS current
DESCRIPTION
"Indicates that MEP receives a CCM frame with the RDI field cleared."
::= { hwEthOamTraps 47 }
hwY1731AisExceedMaxPktNum NOTIFICATION-TYPE
OBJECTS { hwY1731AisMaxPktNum }
STATUS current
DESCRIPTION
"Indicates that the number of AIS packets transmitted in one second exceeds the upper limit."
::= { hwEthOamTraps 48 }
hwY1731AisExceedMaxPktNumCleared NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Indicates that the number of AIS packets transmitted in one second under the upper limit."
::= { hwEthOamTraps 49 }
hwY1731LckDefect NOTIFICATION-TYPE
OBJECTS { hwDot1agCfmMdName, hwDot1agCfmMaName, hwDot1agCfmMepIdentifier}
STATUS current
DESCRIPTION
"LCK status has been entered."
::= { hwEthOamTraps 50 }
hwY1731LckDefectCleared NOTIFICATION-TYPE
OBJECTS { hwDot1agCfmMdName, hwDot1agCfmMaName, hwDot1agCfmMepIdentifier}
STATUS current
DESCRIPTION
"LCK status has been exited."
::= { hwEthOamTraps 51 }
hwEthOamConformance OBJECT IDENTIFIER ::= { hwEthOamMib 7 }
hwEthOamCompliances OBJECT IDENTIFIER ::= { hwEthOamConformance 1 }
hwEthOamCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the HUAWEI-ETHOAM-MIB"
MODULE -- this module
MANDATORY-GROUPS { hwDot1agCfmMdGroup, hwDot1agCfmMaGroup, hwDot1agCfmMepGroup, hwDot1agCfmRMepGroup, hwDot1agCfmMipGroup,
hwDot1agCfmMacPingGroup, hwDot1agCfmMacTraceGroup, hwDot1agCfmMacTraceReplyGroup, hwDot3ahEfmDetectModeGroup, hwTestMessageGroup,
hwTestMessageResultGroup, hwEthOamTrapsGroup, hwDot1agCfmGroup, hwDot3ahEfmControlGroup, hwDot3ahEfmPeerGroup,
hwDot3ahEfmStatsBaseGroup, hwDot3ahEfmManagerGroup}
OBJECT hwDot1agCfmRMepRowStatus
DESCRIPTION
"Support for createAndWait is not required."
OBJECT hwTestMessageRowStatus
DESCRIPTION
"Support for createAndWait is not required."
GROUP hwDot3ahEfmLoopbackGroup
DESCRIPTION
"This group is mandatory for all IEEE 802.3 OAM
implementations that support loopback functionality. "
GROUP hwDot3ahEfmErrSymbolPeriodEventGroup
DESCRIPTION
"This group is mandatory for all IEEE 802.3 OAM
implementations that support event functionality. "
GROUP hwDot3ahEfmErrFramePeriodEventGroup
DESCRIPTION
"This group is mandatory for all IEEE 802.3 OAM
implementations that support event functionality. "
GROUP hwDot3ahEfmErrFrameEventGroup
DESCRIPTION
"This group is mandatory for all IEEE 802.3 OAM
implementations that support event functionality. "
GROUP hwDot3ahEfmErrFrameSecsSummaryEventGroup
DESCRIPTION
"This group is mandatory for all IEEE 802.3 OAM
implementations that support event functionality. "
GROUP hwDot3ahEfmFlagEventGroup
DESCRIPTION
"This group is optional for all IEEE 802.3 OAM
implementations. The ability to send critical events or dying
gasp events is not required in any system."
GROUP hwDot3ahEfmEventLogGroup
DESCRIPTION
"This group is optional for all IEEE 802.3 OAM
implementations. Entries in this table are dependent on what
event functionality is supported in the local OAM
implementation. At least one type of event must be supported
for entries to appear in this table. "
GROUP hwY1731ManagerGroup
DESCRIPTION
"This group is mandatory for all ITU Y.1731
implementations that support event functionality. "
::= { hwEthOamCompliances 1 }
hwEthOamGroups OBJECT IDENTIFIER ::= { hwEthOamConformance 2 }
hwDot1agCfmMdGroup OBJECT-GROUP
OBJECTS { hwDot1agCfmMdTableNextIndex, hwDot1agCfmMdFormat, hwDot1agCfmMdName, hwDot1agCfmMdMdLevel, hwDot1agCfmMdMhfCreation,
hwDot1agCfmMdMhfIdPermission, hwDot1agCfmMdRowStatus }
STATUS current
DESCRIPTION
"Objects for the hwDot1agCfmMd group."
::= { hwEthOamGroups 1 }
hwDot1agCfmMaGroup OBJECT-GROUP
OBJECTS { hwDot1agCfmMaNextIndex, hwDot1agCfmMaName, hwDot1agCfmMaMapType, hwDot1agCfmMaMapVlanValue, hwDot1agCfmMaMapVsiName,
hwDot1agCfmMaMapL2vcType, hwDot1agCfmMaMapL2vcValue, hwDot1agCfmMaPktPriority, hwDot1agCfmMaRmepActiveTime, hwDot1agCfmMaMepFngAlarmTime,
hwDot1agCfmMaMepFngResetTime, hwDot1agCfmMaRowStatus, hwDot1agCfmMaCcmInterval }
STATUS current
DESCRIPTION
"Objects for the hwDot1agCfmMa group."
::= { hwEthOamGroups 2 }
hwDot1agCfmMepGroup OBJECT-GROUP
OBJECTS { hwDot1agCfmMepIsVlanType, hwDot1agCfmMepIfIndex, hwDot1agCfmMepDot1qVlan, hwDot1agCfmMepPeVlan, hwDot1agCfmMepCeVlan,
hwDot1agCfmMepDirection, hwDot1agCfmMepCcmSendEnabled, hwDot1agCfmMepMacAddress, hwDot1agCfmMepRowStatus }
STATUS current
DESCRIPTION
"Objects for the hwDot1agCfmMep group."
::= { hwEthOamGroups 3 }
hwDot1agCfmRMepGroup OBJECT-GROUP
OBJECTS { hwDot1agCfmRMepMacAddress, hwDot1agCfmRMepCcmRecvEnabled, hwDot1agCfmRMepStateIsUp,
hwDot1agCfmRMepHighestPrDefect, hwDot1agCfmRMepRowStatus }
STATUS current
DESCRIPTION
"RMEP configuration group"
::= { hwEthOamGroups 4 }
hwDot1agCfmMipGroup OBJECT-GROUP
OBJECTS { hwDot1agCfmMipLevel, hwDot1agCfmMipIfMacAddress }
STATUS current
DESCRIPTION
"MIP configuration group"
::= { hwEthOamGroups 5 }
hwDot1agCfmMacPingGroup OBJECT-GROUP
OBJECTS { hwDot1agCfmMacPingState, hwDot1agCfmMacPingMdName, hwDot1agCfmMacPingMaName, hwDot1agCfmMacPingMepId, hwDot1agCfmMacPingDestIsMepId,
hwDot1agCfmMacPingDestMepId, hwDot1agCfmMacPingMacAddress, hwDot1agCfmMacPingOutIfIndex, hwDot1agCfmMacPingTimeOut, hwDot1agCfmMacPingCount,
hwDot1agCfmMacPingPacketSize, hwDot1agCfmMacPingPriority, hwDot1agCfmMacPingSendPacketNum, hwDot1agCfmMacPingRecvPacketNum,
hwDot1agCfmMacPingPacketLossRatio, hwDot1agCfmMacPingRecvTimeDelayMin, hwDot1agCfmMacPingRecvTimeDelayMax,
hwDot1agCfmMacPingRecvTimeDelayAvg, hwDot1agCfmMacPingRowStatus }
STATUS current
DESCRIPTION
"Gmac Ping starting and statistics group"
::= { hwEthOamGroups 6 }
hwDot1agCfmMacTraceGroup OBJECT-GROUP
OBJECTS { hwDot1agCfmMacTraceState, hwDot1agCfmMacTraceMdName, hwDot1agCfmMacTraceMaName, hwDot1agCfmMacTraceDestIsMepId, hwDot1agCfmMacTraceDestMepId,
hwDot1agCfmMacTraceMacAddress, hwDot1agCfmMacTraceOutIfIndex, hwDot1agCfmMacTraceTimeOut, hwDot1agCfmMacTraceTTL, hwDot1agCfmMacTraceSendSeqNumber,
hwDot1agCfmMacTraceResult, hwDot1agCfmMacTraceMepId, hwDot1agCfmMacTraceRowStatus }
STATUS current
DESCRIPTION
"Mac Trace starting and statistics group"
::= { hwEthOamGroups 7 }
hwDot1agCfmMacTraceReplyGroup OBJECT-GROUP
OBJECTS { hwDot1agCfmMacTraceReplyTTL, hwDot1agCfmMacTraceReplyForwarded, hwDot1agCfmMacTraceReplyTerminalMep, hwDot1agCfmMacTraceReplyRelayAction,
hwDot1agCfmMacTraceReplyIngressAction, hwDot1agCfmMacTraceReplyIngressMac, hwDot1agCfmMacTraceReplyIngressIfName, hwDot1agCfmMacTraceReplyEgressAction,
hwDot1agCfmMacTraceReplyEgressMac, hwDot1agCfmMacTraceReplyEgressIfName }
STATUS current
DESCRIPTION
"Gmac Trace starting and statistics group"
::= { hwEthOamGroups 8 }
hwDot1agCfmQueryMdIndexGroup OBJECT-GROUP
OBJECTS { hwDot1agCfmQueryMdIndex }
STATUS current
DESCRIPTION
"Querying MD index group"
::= { hwEthOamGroups 9 }
hwDot1agCfmQueryMaIndexGroup OBJECT-GROUP
OBJECTS { hwDot1agCfmQueryMaIndex }
STATUS current
DESCRIPTION
"Querying MA index group"
::= { hwEthOamGroups 10 }
hwDot3ahEfmDetectModeGroup OBJECT-GROUP
OBJECTS { hwDot3ahEfmEnabled, hwDot3ahEfmDetectMode, hwDot3ahEfmDetectInterval, hwDot3ahEfmDetectMalfunction }
STATUS current
DESCRIPTION
"Test mode group"
::= { hwEthOamGroups 11 }
hwTestMessageGroup OBJECT-GROUP
OBJECTS { hwTestMessageTableNextIndex, hwTestMessageInterface, hwTestMessageServiceInstance, hwTestMessageMacAddress, hwTestMessageVlanID,
hwTestMessagePacketSize, hwTestMessageSendPackets, hwTestMessageSendSpeed, hwTestMessageSendEnabled, hwTestMessageSendFinished,
hwTestMessageRowStatus }
STATUS current
DESCRIPTION
"Test packets setting group"
::= { hwEthOamGroups 12 }
hwTestMessageResultGroup OBJECT-GROUP
OBJECTS { hwTestMessageResultSendPackets, hwTestMessageResultReceivedPackets, hwTestMessageResultPacketsLost, hwTestMessageResultSendBytes, hwTestMessageResultReceivedBytes,
hwTestMessageResultBytesLost, hwTestMessageBeginTimeStamp, hwTestMessageEndTimeStamp }
STATUS current
DESCRIPTION
"The group for the tested packets results to be returned."
::= { hwEthOamGroups 13 }
hwEthOamTrapsGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwDot1agCfmFaultAlarm, hwTestMessageFailed, hwTestMessageCompleted, hwDot3ahEfmThresholdEvent, hwDot3ahEfmNonThresholdEvent, hwDot3ahEfmRemoteDyingGaspEvent,
hwDot3ahEfmNonThresholdRecovery, hwCfmVlanOnewayDelay, hwCfmVlanOnewayDelayRecovery, hwCfmVlanTwowayDelay, hwCfmVlanTwowayDelayRecovery, hwDot1agCfmUnexpectedMEGLevel,
hwDot1agCfmUnexpectedMEGLevelCleared, hwDot1agCfmMismerge, hwDot1agCfmMismergeCleared, hwDot1agCfmUnexpectedMEP, hwDot1agCfmUnexpectedMEPCleared, hwDot1agCfmUnexpectedPeriod,
hwDot1agCfmUnexpectedPeriodCleared, hwDot1agCfmUnexpectedMAC, hwDot1agCfmUnexpectedMACCleared, hwDot1agCfmLOC, hwDot1agCfmLOCCleared, hwDot1agCfmExceptionalMACStatus,
hwDot1agCfmExceptionalMACStatusCleared, hwDot1agCfmRDI, hwDot1agCfmRDICleared, hwDot3ahEfmLoopbackFailed, hwY1731AisDefectAlarm, hwY1731AisDefectAlarmRecovery,
hwY1731AisExceedMaxPktNum, hwY1731AisExceedMaxPktNumCleared, hwY1731LckDefect, hwY1731LckDefectCleared}
STATUS current
DESCRIPTION
"Objects for the Notifications group.
A collection of notifications used by Ethernet OAM to signal
to a management entity that local or remote events have
occurred on a specified Ethernet link.
This group is optional for all IEEE 802.3 OAM
implementations. Since the information in the notifications
is dependent on the hwDot3ahEfmEventLogTable, that table must be
implemented for notifications."
::= { hwEthOamGroups 14 }
hwDot1agCfmGroup OBJECT-GROUP
OBJECTS { hwDot1agCfmVersion, hwDot1agCfmEnabled }
STATUS current
DESCRIPTION
"Cfm enabling and statistics group"
::= { hwEthOamGroups 15 }
hwDot3ahEfmControlGroup OBJECT-GROUP
OBJECTS { hwDot3ahEfmAdminState, hwDot3ahEfmOperStatus, hwDot3ahEfmMode, hwDot3ahEfmMaxOamPduSize, hwDot3ahEfmConfigRevision,
hwDot3ahEfmFunctionsSupported,hwDot3ahEfmTimeout, hwDot3ahEfmInterval }
STATUS current
DESCRIPTION
"A collection of objects providing the abilities,
configuration, and status of an Ethernet OAM entity. "
::= { hwEthOamGroups 16 }
hwDot3ahEfmPeerGroup OBJECT-GROUP
OBJECTS { hwDot3ahEfmPeerMacAddress, hwDot3ahEfmPeerVendorOui, hwDot3ahEfmPeerVendorInfo, hwDot3ahEfmPeerMode, hwDot3ahEfmPeerFunctionsSupported,
hwDot3ahEfmPeerMaxOamPduSize, hwDot3ahEfmPeerConfigRevision }
STATUS current
DESCRIPTION
"A collection of objects providing the abilities,
configuration, and status of a peer Ethernet OAM entity. "
::= { hwEthOamGroups 17 }
hwDot3ahEfmStatsBaseGroup OBJECT-GROUP
OBJECTS { hwDot3ahEfmInformationTx, hwDot3ahEfmInformationRx, hwDot3ahEfmUniqueEventNotificationTx, hwDot3ahEfmUniqueEventNotificationRx, hwDot3ahEfmDuplicateEventNotificationTx,
hwDot3ahEfmDuplicateEventNotificationRx, hwDot3ahEfmLoopbackControlTx, hwDot3ahEfmLoopbackControlRx, hwDot3ahEfmVariableRequestTx, hwDot3ahEfmVariableRequestRx,
hwDot3ahEfmVariableResponseTx, hwDot3ahEfmVariableResponseRx, hwDot3ahEfmOrgSpecificTx, hwDot3ahEfmOrgSpecificRx, hwDot3ahEfmUnsupportedCodesTx,
hwDot3ahEfmUnsupportedCodesRx, hwDot3ahEfmFramesLostDueToOam }
STATUS current
DESCRIPTION
"A collection of objects providing the statistics for the
number of various transmit and receive events for OAM on an
Ethernet like interface. Note that all of these counters must
be supported even if the related function (as described in
hwDot3ahEfmFunctionsSupported) is not supported. "
::= { hwEthOamGroups 18 }
hwDot3ahEfmLoopbackGroup OBJECT-GROUP
OBJECTS { hwDot3ahEfmLoopbackStatus, hwDot3ahEfmLoopbackIgnoreRx, hwDot3ahEfmLoopbackTimeout }
STATUS current
DESCRIPTION
"A collection of objects for controlling the OAM remote
loopback function. "
::= { hwEthOamGroups 19 }
hwDot3ahEfmErrSymbolPeriodEventGroup OBJECT-GROUP
OBJECTS { hwDot3ahEfmErrSymPeriodWindowHi, hwDot3ahEfmErrSymPeriodWindowLo, hwDot3ahEfmErrSymPeriodThresholdHi, hwDot3ahEfmErrSymPeriodThresholdLo, hwDot3ahEfmErrSymPeriodEvNotifEnable
}
STATUS current
DESCRIPTION
"A collection of objects for configuring the thresholds for an
Errored Symbol Period Event.
Each [802.3ah] defined Event Notification TLV has its own
conformance group because each event can be implemented
independently of any other. "
::= { hwEthOamGroups 20 }
hwDot3ahEfmErrFramePeriodEventGroup OBJECT-GROUP
OBJECTS { hwDot3ahEfmErrFramePeriodWindow, hwDot3ahEfmErrFramePeriodThreshold, hwDot3ahEfmErrFramePeriodEvNotifEnable }
STATUS current
DESCRIPTION
"A collection of objects for configuring the thresholds for an
Errored Frame Period Event.
Each [802.3ah] defined Event Notification TLV has its own
conformance group because each event can be implemented
independently of any other. "
::= { hwEthOamGroups 21 }
hwDot3ahEfmErrFrameEventGroup OBJECT-GROUP
OBJECTS { hwDot3ahEfmErrFrameWindow, hwDot3ahEfmErrFrameThreshold, hwDot3ahEfmErrFrameEvNotifEnable }
STATUS current
DESCRIPTION
"A collection of objects for configuring the thresholds for an
Errored Frame Event.
Each [802.3ah] defined Event Notification TLV has its own
conformance group because each event can be implemented
independently of any other. "
::= { hwEthOamGroups 22 }
hwDot3ahEfmErrFrameSecsSummaryEventGroup OBJECT-GROUP
OBJECTS { hwDot3ahEfmErrFrameSecsSummaryWindow, hwDot3ahEfmErrFrameSecsSummaryThreshold, hwDot3ahEfmErrFrameSecsEvNotifEnable }
STATUS current
DESCRIPTION
"A collection of objects for configuring the thresholds for an
Errored Frame Seconds Summary Event.
Each [802.3ah] defined Event Notification TLV has its own
conformance group because each event can be implemented
independently of any other. "
::= { hwEthOamGroups 23 }
hwDot3ahEfmFlagEventGroup OBJECT-GROUP
OBJECTS { hwDot3ahEfmDyingGaspEnable, hwDot3ahEfmCriticalEventEnable, hwDot3ahEfmThresholdTriggerErrDown }
STATUS current
DESCRIPTION
"A collection of objects for configuring the sending OAMPDUs
with the critical event flag or dying gasp flag enabled. "
::= { hwEthOamGroups 24 }
hwDot3ahEfmEventLogGroup OBJECT-GROUP
OBJECTS { hwDot3ahEfmEventLogTimestamp, hwDot3ahEfmEventLogOui, hwDot3ahEfmEventLogType, hwDot3ahEfmEventLogLocation, hwDot3ahEfmEventLogWindowHi,
hwDot3ahEfmEventLogWindowLo, hwDot3ahEfmEventLogThresholdHi, hwDot3ahEfmEventLogThresholdLo, hwDot3ahEfmEventLogValue, hwDot3ahEfmEventLogRunningTotal,
hwDot3ahEfmEventLogEventTotal }
STATUS current
DESCRIPTION
"A collection of objects for configuring the thresholds for an
Errored Frame Seconds Summary Event and maintaining the event
information. "
::= { hwEthOamGroups 25 }
hwDot3ahEfmManagerGroup OBJECT-GROUP
OBJECTS { hwDot3ahEfmTriggerIfDown, hwDot3ahEfmHoldUpTime }
STATUS current
DESCRIPTION
"hwDot3ahEfmManagerGroup "
::= { hwEthOamGroups 26 }
hwDot3ahEvrrpGroup OBJECT-GROUP
OBJECTS { hwDot3ahEvrrpCpuState, hwDot3ahEvrrpTriggerIfDown, hwDot3ahEvrrpHoldUpTime }
STATUS current
DESCRIPTION
"A collection of objects for displaying and maintaining
the infomation for Evrrp state. "
::= { hwEthOamGroups 27 }
hwY1731BaseConfigGroup OBJECT-GROUP
OBJECTS { hwY1731PwMeasureMode, hwY1731OneDelayThreshold, hwY1731TwoDelayThreshold }
STATUS current
DESCRIPTION
"A collection of objects for configuring OAM functions for base."
::= { hwEthOamGroups 28 }
hwY1731ConfigGroup OBJECT-GROUP
OBJECTS { hwY1731RemoteIp, hwY1731VcId, hwY1731MacAddress, hwY1731ResvIndex, hwY1731ServiceType,
hwY1731SingleLossRecvEnable, hwY1731OneDelayRecvEnable, hwY1731OneDelayRecvEnableIsContinue, hwY1731TwoDelayRecvEnable,
hwY1731SingleLossEnable, hwY1731SingleLossIsContinue, hwY1731SingleLossMepId, hwY1731SingleLossDestIsMepId, hwY1731SingleLossDestMepId,
hwY1731SingleLossMacAddress, hwY1731SingleLossInterval, hwY1731SingleLossCount, hwY1731SingleLoss8021pValue,
hwY1731DualLossEnable, hwY1731DualLossMepId, hwY1731DualLossDestMepId,
hwY1731OneDelayEnable, hwY1731OneDelayIsContinue, hwY1731OneDelayMepId, hwY1731OneDelayDestIsMepId, hwY1731OneDelayDestMepId,
hwY1731OneDelayMacAddress, hwY1731OneDelayInterval, hwY1731OneDelayCount, hwY1731OneDelay8021pValue,
hwY1731TwoDelayEnable, hwY1731TwoDelayIsContinue, hwY1731TwoDelayMepId, hwY1731TwoDelayDestIsMepId, hwY1731TwoDelayDestMepId,
hwY1731TwoDelayMacAddress, hwY1731TwoDelayInterval, hwY1731TwoDelayCount, hwY1731TwoDelay8021pValue,
hwY1731SingleLossRecv8021pValue, hwY1731OneDelayRecv8021pValue,hwY1731TwoDelayRecv8021pValue,
hwY1731SingleLossRecvMepId, hwY1731OneDelayRecvMepId, hwY1731TwoDelayRecvMepId, hwY1731OneDelayPacketSize, hwY1731TwoDelayPacketSize
}
STATUS current
DESCRIPTION
"A collection of objects for configuring OAM functions for performance monitoring."
::= { hwEthOamGroups 29 }
hwY1731AisGroup OBJECT-GROUP
OBJECTS { hwY1731AisEnable, hwY1731AisSendLevel, hwY1731AisSendInterval, hwY1731AisSendPktStatus, hwY1731AisSuppressEnable,
hwY1731AisSuppressStatus }
STATUS current
DESCRIPTION
"A collection of objects for configuring the Alarm Indication Signal (AIS)
function to suppress alarms.
"
::= { hwEthOamGroups 30 }
hwY1731AisVlanGroup OBJECT-GROUP
OBJECTS { hwY1731AisPeVlan, hwY1731AisLowCeVlan, hwY1731AisHighCeVlan, hwY1731AisLowDot1qVlan, hwY1731AisHighDot1qVlan,
hwY1731AisRowStatus }
STATUS current
DESCRIPTION
"A collection of objects for configuring the information about the VLAN
that receives AIS frames.
"
::= { hwEthOamGroups 31 }
hwY1731AisLinkStatusGroup OBJECT-GROUP
OBJECTS { hwY1731AisLinkRowStatus }
STATUS current
DESCRIPTION
"A collection of objects for configuring sending AIS packets when the
status of the interface which is monitored goes down."
::= { hwEthOamGroups 32 }
hwY1731MulPingGroup OBJECT-GROUP
OBJECTS { hwY1731MulPingState, hwY1731MulPingMdName, hwY1731MulPingMaName, hwY1731MulPingMepId, hwY1731MulPingTimeout,
hwY1731MulPingCount, hwY1731MulPingPriority, hwY1731MulPingSendPacketNum, hwY1731MulPingRecvPacketNum,
hwY1731MulPingRecvTimeDelayMin, hwY1731MulPingRecvTimeDelayMax, hwY1731MulPingRecvTimeDelayAvg, hwY1731MulPingRowStatus }
STATUS current
DESCRIPTION
"A collection of objects for configuring the multicast MAC ping function."
::= { hwEthOamGroups 33 }
hwY1731MulPingReplyGroup OBJECT-GROUP
OBJECTS { hwY1731MulPingReplyMepId, hwY1731MulPingReplyMacAddress, hwY1731MulPingReplyTransTime }
STATUS current
DESCRIPTION
"A collection of objects for displaying information about
the multicast LBRs for responding to the multicast MAC ping operation.
"
::= { hwEthOamGroups 34 }
hwY1731ResetStatisticGroup OBJECT-GROUP
OBJECTS { hwY1731ResetStatisticType, hwY1731ResetStatistic8021pValue }
STATUS current
DESCRIPTION
"A collection of objects for reset Y1731 statistic information.
"
::= { hwEthOamGroups 35 }
hwY1731ManagerGroup OBJECT-GROUP
OBJECTS { hwY1731SingleLossStatisticGatherInterval, hwY1731SingleLossLocalStatistic, hwY1731SingleLossLocalRatio,
hwY1731SingleLossLocalRatioMax, hwY1731SingleLossLocalRatioMin, hwY1731SingleLossLocalRatioAvg,
hwY1731SingleLossRemoteStatistic, hwY1731SingleLossRemoteRatio,
hwY1731SingleLossRemoteRatioMax, hwY1731SingleLossRemoteRatioMin, hwY1731SingleLossRemoteRatioAvg,
hwY1731OneDelayStatistic, hwY1731OneDelayVariation,
hwY1731OneDelayMax, hwY1731OneDelayMin, hwY1731OneDelayAvg,
hwY1731TwoDelayStatistic, hwY1731TwoDelayVariation,
hwY1731TwoDelayMax, hwY1731TwoDelayMin, hwY1731TwoDelayAvg,
hwY1731SingleLossLocalMax, hwY1731SingleLossLocalMin, hwY1731SingleLossLocalAvg,
hwY1731SingleLossRemoteMax, hwY1731SingleLossRemoteMin, hwY1731SingleLossRemoteAvg,
hwY1731OneDelayStatisticMax, hwY1731OneDelayStatisticMin, hwY1731OneDelayStatisticAvg,
hwY1731TwoDelayStatisticMax, hwY1731TwoDelayStatisticMin, hwY1731TwoDelayStatisticAvg,hwY1731TwoDelayUnresponsivePacketCount,
hwCfmOneDelayTrapLogMacAddress, hwCfmVlanOneDelayTrapLogTimestamp,
hwCfmVlanOneDelayTrapLogDelayValue, hwCfmVlanOneDelayTrapLogThreshold,
hwCfmOneDelayRecoveryTrapMacAddress, hwCfmVlanOneDelayRecoveryTrapLogTimestamp,
hwCfmVlanOneDelayRecoveryTrapLogDelayValue, hwCfmVlanOneDelayRecoveryTrapLogThreshold,
hwCfmTwoDelayTrapMacAddress, hwCfmVlanTwoDelayTrapLogTimestamp,
hwCfmVlanTwoDelayTrapLogDelayValue, hwCfmVlanTwoDelayTrapLogThreshold,
hwCfmTwoDelayRecoveryTrapMacAddress, hwCfmVlanTwoDelayRecoveryTrapLogTimestamp,
hwCfmVlanTwoDelayRecoveryTrapLogDelayValue, hwCfmVlanTwoDelayRecoveryTrapLogThreshold, hwY1731AisMaxPktNum
}
STATUS current
DESCRIPTION
"Y.1731 detecting group"
::= { hwEthOamGroups 36 }
hwY1731AisVlanConfigGroup OBJECT-GROUP
OBJECTS { hwY1731AisConfigVlanListLow, hwY1731AisConfigVlanListHigh, hwY1731AisVlanConfigRowStatus }
STATUS current
DESCRIPTION
"A collection of objects for configuring the information about the VLAN
that receives AIS frames.
"
::= { hwEthOamGroups 37 }
hwEthOamY1731 OBJECT IDENTIFIER ::= { hwEthOamMib 8 }
hwY1731ConfigObject OBJECT IDENTIFIER ::= { hwEthOamY1731 1 }
hwY1731BaseConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwY1731BaseConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure OAM functions for base."
::= { hwY1731ConfigObject 1 }
hwY1731BaseConfigEntry OBJECT-TYPE
SYNTAX HwY1731BaseConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration entry of base config."
INDEX { hwDot1agCfmMdIndex, hwDot1agCfmMaIndex }
::= { hwY1731BaseConfigTable 1 }
HwY1731BaseConfigEntry ::=
SEQUENCE {
hwY1731PwMeasureMode
INTEGER,
hwY1731OneDelayThreshold
Unsigned32,
hwY1731TwoDelayThreshold
Unsigned32
}
hwY1731PwMeasureMode OBJECT-TYPE
SYNTAX INTEGER
{
invalid(1),
symmetry(2),
asymmetry(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the PW measure mode.
The value can be:
invalid
symmetry
asymmetry
If MA associates with a VLAN, the value is invalid.
If MA associates with VSI or VLL, the default value is asymmetry.
"
::= { hwY1731BaseConfigEntry 1 }
hwY1731OneDelayThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the alarm threshold for the one-way ETH-DM.
This object can be set only in VLAN.
The value ranges from 1 to 4294967295.
If hwY1731OneDelayThreshold is set to 0, the default alarm threshold of the one-way frame delay is used. By default, no alarm threshold of the one-way frame delay is set.
"
::= { hwY1731BaseConfigEntry 2 }
hwY1731TwoDelayThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object indicates the alarm threshold for the two-way ETH-DM.
This object can be set only in VLAN.
The value ranges from 1 to 4294967295.
If hwY1731TwoDelayThreshold is set to 0, the default alarm threshold of the two-way frame delay is used. By default, no alarm threshold of the two-way frame delay is set.
"
::= { hwY1731BaseConfigEntry 3 }
hwY1731ConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwY1731ConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure OAM functions for performance monitoring."
::= { hwY1731ConfigObject 2 }
hwY1731ConfigEntry OBJECT-TYPE
SYNTAX HwY1731ConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration entry of performance monitoring functions."
INDEX { hwDot1agCfmMdIndex, hwDot1agCfmMaIndex, hwY1731RemoteIp, hwY1731VcId, hwY1731MacAddress, hwY1731ResvIndex }
::= { hwY1731ConfigTable 1 }
HwY1731ConfigEntry ::=
SEQUENCE {
hwY1731RemoteIp
IpAddress,
hwY1731VcId
Unsigned32,
hwY1731MacAddress
MacAddress,
hwY1731ResvIndex
Integer32,
hwY1731ServiceType
INTEGER,
hwY1731SingleLossRecvEnable
EnabledStatus,
hwY1731OneDelayRecvEnable
EnabledStatus,
hwY1731OneDelayRecvEnableIsContinue
TruthValue,
hwY1731TwoDelayRecvEnable
EnabledStatus,
hwY1731SingleLossEnable
EnabledStatus,
hwY1731SingleLossIsContinue
TruthValue,
hwY1731SingleLossMepId
Integer32,
hwY1731SingleLossDestIsMepId
TruthValue,
hwY1731SingleLossDestMepId
Integer32,
hwY1731SingleLossMacAddress
MacAddress,
hwY1731SingleLossInterval
INTEGER,
hwY1731SingleLossCount
Integer32,
hwY1731SingleLoss8021pValue
Integer32,
hwY1731DualLossEnable
EnabledStatus,
hwY1731DualLossMepId
Integer32,
hwY1731DualLossDestMepId
Integer32,
hwY1731OneDelayEnable
EnabledStatus,
hwY1731OneDelayIsContinue
TruthValue,
hwY1731OneDelayMepId
Integer32,
hwY1731OneDelayDestIsMepId
TruthValue,
hwY1731OneDelayDestMepId
Integer32,
hwY1731OneDelayMacAddress
MacAddress,
hwY1731OneDelayInterval
INTEGER,
hwY1731OneDelayCount
Integer32,
hwY1731OneDelay8021pValue
Integer32,
hwY1731TwoDelayEnable
EnabledStatus,
hwY1731TwoDelayIsContinue
TruthValue,
hwY1731TwoDelayMepId
Integer32,
hwY1731TwoDelayDestIsMepId
TruthValue,
hwY1731TwoDelayDestMepId
Integer32,
hwY1731TwoDelayMacAddress
MacAddress,
hwY1731TwoDelayInterval
INTEGER,
hwY1731TwoDelayCount
Integer32,
hwY1731TwoDelay8021pValue
Integer32,
hwY1731SingleLossRecv8021pValue
Integer32,
hwY1731OneDelayRecv8021pValue
Integer32,
hwY1731TwoDelayRecv8021pValue
Integer32,
hwY1731SingleLossRecvMepId
Integer32,
hwY1731OneDelayRecvMepId
Integer32,
hwY1731TwoDelayRecvMepId
Integer32,
hwY1731OneDelayPacketSize
Integer32,
hwY1731TwoDelayPacketSize
Integer32
}
hwY1731RemoteIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the IP address of the remote end."
::= { hwY1731ConfigEntry 1 }
hwY1731VcId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the VC ID."
::= { hwY1731ConfigEntry 2 }
hwY1731MacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the MAC address of the remote end."
::= { hwY1731ConfigEntry 3 }
hwY1731ResvIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the index for reserve."
::= { hwY1731ConfigEntry 4 }
hwY1731ServiceType OBJECT-TYPE
SYNTAX INTEGER
{
vlan(1),
vsi(2),
vll(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the type of service.
The service can be:
vlan
vsi
vll
"
::= { hwY1731ConfigEntry 5 }
hwY1731SingleLossRecvEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether the single-ended ETH-LM receiving is enabled on the MEP
in the MA to implement the single-ended ETH-LM.
The value can be:
enabled
disabled
By default, the value is disabled."
::= { hwY1731ConfigEntry 6 }
hwY1731OneDelayRecvEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether the one-way ETH-DM receiving is enabled on the MEP
in the MA to implement the one-way ETH-DM.
The value can be:
enabled
disabled
By default, the value is disabled."
::= { hwY1731ConfigEntry 7 }
hwY1731OneDelayRecvEnableIsContinue OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether the one-way ETH-DM receiving is continual."
::= { hwY1731ConfigEntry 8 }
hwY1731TwoDelayRecvEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether the two-way ETH-DM receiving is enabled on the MEP
in the MA to implement the two-way ETH-DM.
The value can be:
enabled
disabled
By default, the value is disabled.
"
::= { hwY1731ConfigEntry 9 }
hwY1731SingleLossEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether the single-ended ETH-LM sending is enabled.
The value can be:
enabled
disabled
By default, the value is disabled.
"
::= { hwY1731ConfigEntry 10 }
hwY1731SingleLossIsContinue OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether the single-ended ETH-LM sending is continual.
If the value is 'false', it indicates that the single-ended ETH-LM is on-demand.
"
::= { hwY1731ConfigEntry 11 }
hwY1731SingleLossMepId OBJECT-TYPE
SYNTAX Integer32 (0 | 1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the ID of the local MEP that is specified
in the single-ended ETH-LM operation.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value.
"
::= { hwY1731ConfigEntry 12 }
hwY1731SingleLossDestIsMepId OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether the destination MAC address of
the single-ended ETH-LM is the specified RMEP's MAC address.
"
::= { hwY1731ConfigEntry 13 }
hwY1731SingleLossDestMepId OBJECT-TYPE
SYNTAX Integer32 (0 | 1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the ID of the remote MEP that is specified
in the single-ended ETH-LM operation.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value.
"
::= { hwY1731ConfigEntry 14 }
hwY1731SingleLossMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the MAC address of the remote end."
::= { hwY1731ConfigEntry 15 }
hwY1731SingleLossInterval OBJECT-TYPE
SYNTAX INTEGER
{
invalid(1),
interval1s(2),
interval10s(3),
interval30s(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the interval of the sent LMM frames.
When on-demand OAM, the value can be:
1 second
10 seconds
When proactive OAM, the value can be:
30 seconds
"
::= { hwY1731ConfigEntry 16 }
hwY1731SingleLossCount OBJECT-TYPE
SYNTAX Integer32 (0 | 1..60)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the number of the sent LMM frames.
The value can be 0 or ranges from 1 to 60.
When proactive OAM, the value is 0."
::= { hwY1731ConfigEntry 17 }
hwY1731SingleLoss8021pValue OBJECT-TYPE
SYNTAX Integer32 (0 | 1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the 802.1p priority of the sent LMM packets.
The priority value ranges from 0 to 7. It maps a 8 bits number.
0 - 1 (0x01)
1 - 2 (0x02)
2 - 4 (0x04)
3 - 8 (0x08)
4 - 16 (0x10)
5 - 32 (0x20)
6 - 64 (0x40)
7 - 128(0x80)
For example, if 802.1p priority is 0 , 4 , 7, the value is 145(1 + 16 + 128).
The value 0 indicates that the priority is not set.
In the case of on-demand OAM, this object is not required.
"
::= { hwY1731ConfigEntry 18 }
hwY1731DualLossEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether the dual-ended ETH-LM is enabled.
The value can be:
enabled
disabled
By default, the value is disabled.
"
::= { hwY1731ConfigEntry 19 }
hwY1731DualLossMepId OBJECT-TYPE
SYNTAX Integer32 (0 | 1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the ID of the local MEP that is specified
in the dual-ended ETH-LM operation.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value.
"
::= { hwY1731ConfigEntry 20 }
hwY1731DualLossDestMepId OBJECT-TYPE
SYNTAX Integer32 (0 | 1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the ID of the remote MEP that is specified
in the dual-ended ETH-LM operation.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value.
"
::= { hwY1731ConfigEntry 21 }
hwY1731OneDelayEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether the one-way ETH-DM sending is enabled.
The value can be:
enabled
disabled
By default, the value is disabled.
"
::= { hwY1731ConfigEntry 22 }
hwY1731OneDelayIsContinue OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether the one-way ETH-DM sending is continual.
If the value is 'false', it indicates that the one-way ETH-DM is on-demand.
"
::= { hwY1731ConfigEntry 23 }
hwY1731OneDelayMepId OBJECT-TYPE
SYNTAX Integer32 (0 | 1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the ID of the local MEP that is specified
in the one-way ETH-DM operation.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value.
"
::= { hwY1731ConfigEntry 24 }
hwY1731OneDelayDestIsMepId OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether the destination MAC address of
the one-way ETH-DM is the specified RMEP's MAC address.
"
::= { hwY1731ConfigEntry 25 }
hwY1731OneDelayDestMepId OBJECT-TYPE
SYNTAX Integer32 (0 | 1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the ID of the remote MEP that is specified
in the one-way ETH-DM operation.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value.
"
::= { hwY1731ConfigEntry 26 }
hwY1731OneDelayMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the MAC address of the RMEP."
::= { hwY1731ConfigEntry 27 }
hwY1731OneDelayInterval OBJECT-TYPE
SYNTAX INTEGER
{
invalid(1),
interval1s(2),
interval10s(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the interval of the sent 1DM frames.
When on-demand OAM, the value can be:
1 second
10 seconds
When proactive OAM, the value can be:
1 second
"
::= { hwY1731ConfigEntry 28 }
hwY1731OneDelayCount OBJECT-TYPE
SYNTAX Integer32 (0 | 1..60)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the number of the sent 1DM frames.
The value can be 0 or ranges from 1 to 60.
When proactive OAM, the value is 0."
::= { hwY1731ConfigEntry 29 }
hwY1731OneDelay8021pValue OBJECT-TYPE
SYNTAX Integer32 (0 | 1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the 802.1p priority of the sent 1DM packets.
The priority value ranges from 0 to 7. It maps a 8 bits number.
0 - 1 (0x01)
1 - 2 (0x02)
2 - 4 (0x04)
3 - 8 (0x08)
4 - 16 (0x10)
5 - 32 (0x20)
6 - 64 (0x40)
7 - 128(0x80)
For example, if 802.1p priority is 0, 4 , 7, the value is 145(1 + 16 + 128).
The value 0 indicates that the priority is not set.
In the case of on-demand OAM, this object is not required.
"
::= { hwY1731ConfigEntry 30 }
hwY1731TwoDelayEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether the two-way ETH-DM sending is enabled.
"
::= { hwY1731ConfigEntry 31 }
hwY1731TwoDelayIsContinue OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether the two-way ETH-DM sending is continual.
If the value is 'false', it indicates that the two-way ETH-DM is on-demand.
"
::= { hwY1731ConfigEntry 32 }
hwY1731TwoDelayMepId OBJECT-TYPE
SYNTAX Integer32 (0 | 1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the ID of the local MEP that is specified
in the two-way ETH-DM operation.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value.
"
::= { hwY1731ConfigEntry 33 }
hwY1731TwoDelayDestIsMepId OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether the destination MAC address of
the two-way ETH-DM is the specified RMEP's MAC address.
"
::= { hwY1731ConfigEntry 34}
hwY1731TwoDelayDestMepId OBJECT-TYPE
SYNTAX Integer32 (0 | 1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the ID of the remote MEP that is specified
in the two-way ETH-DM operation.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value."
::= { hwY1731ConfigEntry 35 }
hwY1731TwoDelayMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the destination MAC address."
::= { hwY1731ConfigEntry 36 }
hwY1731TwoDelayInterval OBJECT-TYPE
SYNTAX INTEGER
{
invalid(1),
interval1s(2),
interval10s(3),
interval30s(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the interval of the sent DMM frames.
When on-demand OAM, the value can be:
1 second
10 seconds
When proactive OAM, the value can be:
30 seconds
"
::= { hwY1731ConfigEntry 37 }
hwY1731TwoDelayCount OBJECT-TYPE
SYNTAX Integer32 (0 | 1..60)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the number of the sent DMM frames.
The value can be 0 or ranges from 1 to 60.
When proactive OAM, the value is 0."
::= { hwY1731ConfigEntry 38 }
hwY1731TwoDelay8021pValue OBJECT-TYPE
SYNTAX Integer32 (0 | 1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the 802.1p priority of the sent DMM packets.
The priority value ranges from 0 to 7. It maps a 8 bits number.
0 - 1 (0x01)
1 - 2 (0x02)
2 - 4 (0x04)
3 - 8 (0x08)
4 - 16 (0x10)
5 - 32 (0x20)
6 - 64 (0x40)
7 - 128(0x80)
For example, if 802.1p priority is 0 , 4 , 7, the value is 145(1 + 16 + 128).
The value 0 indicates that the priority is not set.
In the case of on-demand OAM, this object is not required.
"
::= { hwY1731ConfigEntry 39 }
hwY1731SingleLossRecv8021pValue OBJECT-TYPE
SYNTAX Integer32 (0 | 1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the 802.1p priority of the received LMM packets.
The priority value ranges from 0 to 7. It maps a 8 bits number.
0 - 1 (0x01)
1 - 2 (0x02)
2 - 4 (0x04)
3 - 8 (0x08)
4 - 16 (0x10)
5 - 32 (0x20)
6 - 64 (0x40)
7 - 128(0x80)
For example, if 802.1p priority is 0 , 4 , 7, the value is 145(1 + 16 + 128).
The value 0 indicates that the priority is not set.
In the case of on-demand OAM, this object is not required.
"
::= { hwY1731ConfigEntry 40 }
hwY1731OneDelayRecv8021pValue OBJECT-TYPE
SYNTAX Integer32 (0 | 1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the 802.1p priority of the received 1DM packets.
The priority value ranges from 0 to 7. It maps a 8 bits number.
0 - 1 (0x01)
1 - 2 (0x02)
2 - 4 (0x04)
3 - 8 (0x08)
4 - 16 (0x10)
5 - 32 (0x20)
6 - 64 (0x40)
7 - 128(0x80)
For example, if 802.1p priority is 0 , 4 , 7, the value is 145(1 + 16 + 128).
The value 0 indicates that the priority is not set.
In the case of on-demand OAM, this object is not required.
"
::= { hwY1731ConfigEntry 41 }
hwY1731TwoDelayRecv8021pValue OBJECT-TYPE
SYNTAX Integer32 (0 | 1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the 802.1p priority of the received DMM packets.
The priority value ranges from 0 to 7. It maps a 8 bits number.
0 - 1 (0x01)
1 - 2 (0x02)
2 - 4 (0x04)
3 - 8 (0x08)
4 - 16 (0x10)
5 - 32 (0x20)
6 - 64 (0x40)
7 - 128(0x80)
For example, if 802.1p priority is 0 , 4 , 7, the value is 145(1 + 16 + 128).
The value 0 indicates that the priority is not set.
In the case of on-demand OAM, this object is not required.
"
::= { hwY1731ConfigEntry 42 }
hwY1731SingleLossRecvMepId OBJECT-TYPE
SYNTAX Integer32 (0 | 1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the ID of the local MEP.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value.
"
::= { hwY1731ConfigEntry 43 }
hwY1731OneDelayRecvMepId OBJECT-TYPE
SYNTAX Integer32 (0 | 1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the ID of the local MEP.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value.
"
::= { hwY1731ConfigEntry 44 }
hwY1731TwoDelayRecvMepId OBJECT-TYPE
SYNTAX Integer32 (0 | 1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the ID of the local MEP.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value.
"
::= { hwY1731ConfigEntry 45 }
hwY1731OneDelayPacketSize OBJECT-TYPE
SYNTAX Integer32 (0 | 64..1518)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the size of one-way ETH-DM packet.
The value can be 0 or ranges from 64 to 1518.
The value 0 means that the packet size is not specified.
By default, the value is 0.
"
::= { hwY1731ConfigEntry 46 }
hwY1731TwoDelayPacketSize OBJECT-TYPE
SYNTAX Integer32 (0 | 64..1518)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the size of two-way ETH-DM packet.
The value can be 0 or ranges from 64 to 1518.
The value 0 means that the packet size is not specified.
By default, the value is 0.
"
::= { hwY1731ConfigEntry 47 }
hwY1731AisTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwY1731AisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the Alarm Indication Signal (AIS)
function to suppress alarms.
"
::= { hwY1731ConfigObject 3 }
hwY1731AisEntry OBJECT-TYPE
SYNTAX HwY1731AisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of alarm indication signal."
INDEX { hwDot1agCfmMdIndex, hwDot1agCfmMaIndex }
::= { hwY1731AisTable 1 }
HwY1731AisEntry ::=
SEQUENCE {
hwY1731AisEnable
EnabledStatus,
hwY1731AisSendLevel
Integer32,
hwY1731AisSendInterval
INTEGER,
hwY1731AisSendPktStatus
EnabledStatus,
hwY1731AisSuppressEnable
EnabledStatus,
hwY1731AisSuppressStatus
EnabledStatus
}
hwY1731AisEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether the AIS function is enabled in
the current MA. The value of this object can be:
enabled
disabled
By default, the value is disabled.
"
::= { hwY1731AisEntry 1 }
hwY1731AisSendLevel OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the level of the sent AIS frames.
The value can be -1 or ranges from 0 to 7.
The value -1 is an invalid value.
"
::= { hwY1731AisEntry 2 }
hwY1731AisSendInterval OBJECT-TYPE
SYNTAX INTEGER
{
interval1s(1),
interval60s(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the interval of the sent AIS frames.
The value can be:
1 second
60 seconds
The default value is 1 second.
"
DEFVAL { interval1s }
::= { hwY1731AisEntry 3 }
hwY1731AisSendPktStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the current MA is sending AIS frames.
The value can be:
enabled
disabled
By default, the value is disabled.
"
::= { hwY1731AisEntry 4 }
hwY1731AisSuppressEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether the alarm suppression function is enabled.
The value can be:
enabled
disabled
By default, the value is disabled.
"
::= { hwY1731AisEntry 5 }
hwY1731AisSuppressStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the alarm function on the current
device is in the suppression state. The value can be:
enabled
disabled
"
::= { hwY1731AisEntry 6 }
hwY1731AisVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwY1731AisVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the information about the VLAN that
receives AIS frames.
"
::= { hwY1731ConfigObject 4 }
hwY1731AisVlanEntry OBJECT-TYPE
SYNTAX HwY1731AisVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of alarm indication signal about vlan infomation."
INDEX { hwDot1agCfmMdIndex, hwDot1agCfmMaIndex, hwDot1agCfmMepIdentifier }
::= { hwY1731AisVlanTable 1 }
HwY1731AisVlanEntry ::=
SEQUENCE {
hwY1731AisPeVlan
VlanIdOrNone,
hwY1731AisLowCeVlan
VlanIdOrNone,
hwY1731AisHighCeVlan
VlanIdOrNone,
hwY1731AisLowDot1qVlan
VlanIdOrNone,
hwY1731AisHighDot1qVlan
VlanIdOrNone,
hwY1731AisRowStatus
RowStatus
}
hwY1731AisPeVlan OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the ID of the PE VLAN corresponding to
the AIS function.
"
::= { hwY1731AisVlanEntry 1 }
hwY1731AisLowCeVlan OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object indicates the lower limit of the ID of the CE VLAN
corresponding to the AIS function.
"
::= { hwY1731AisVlanEntry 2 }
hwY1731AisHighCeVlan OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the upper limit of the ID of the CE VLAN
corresponding to the AIS function.
"
::= { hwY1731AisVlanEntry 3 }
hwY1731AisLowDot1qVlan OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the lower limit of the ID of the dot1q VLAN
corresponding to the AIS function.
"
::= { hwY1731AisVlanEntry 4 }
hwY1731AisHighDot1qVlan OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the upper limit of the ID of the dot1q VLAN
corresponding to the AIS function.
"
::= { hwY1731AisVlanEntry 5 }
hwY1731AisRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the row status of this table.
The writable columns in a row can not be changed if the row
is active. All columns MUST have a valid value before a row
can be activated."
::= { hwY1731AisVlanEntry 99 }
hwY1731AisLinkStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwY1731AisLinkStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table is used to enable Y.1731 to send AIS packets when the status of the interface which is monitored goes down.
"
::= { hwY1731ConfigObject 5 }
hwY1731AisLinkStatusEntry OBJECT-TYPE
SYNTAX HwY1731AisLinkStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of AIS monitoring the link status of the interface."
INDEX { hwDot1agCfmMdIndex, hwDot1agCfmMaIndex, hwY1731AisLinkStatusIfIndex }
::= { hwY1731AisLinkStatusTable 1 }
HwY1731AisLinkStatusEntry ::=
SEQUENCE {
hwY1731AisLinkStatusIfIndex
InterfaceIndex,
hwY1731AisLinkRowStatus
RowStatus
}
hwY1731AisLinkStatusIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the index of the interface which is monitored by AIS."
::= { hwY1731AisLinkStatusEntry 1 }
hwY1731AisLinkRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the row status of this table.
The writable columns in a row can not be changed if the row
is active. All columns MUST have a valid value before a row
can be activated."
::= { hwY1731AisLinkStatusEntry 20 }
hwY1731MulPingTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwY1731MulPingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the multicast MAC ping function."
::= { hwY1731ConfigObject 6 }
hwY1731MulPingEntry OBJECT-TYPE
SYNTAX HwY1731MulPingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of multicast ping."
INDEX { hwY1731MulPingIndex }
::= { hwY1731MulPingTable 1 }
HwY1731MulPingEntry ::=
SEQUENCE {
hwY1731MulPingIndex
Unsigned32,
hwY1731MulPingState
EnabledStatus,
hwY1731MulPingMdName
OCTET STRING,
hwY1731MulPingMaName
OCTET STRING,
hwY1731MulPingMepId
Integer32,
hwY1731MulPingTimeout
Unsigned32,
hwY1731MulPingCount
Unsigned32,
hwY1731MulPingPriority
Integer32,
hwY1731MulPingSendPacketNum
Counter32,
hwY1731MulPingRecvPacketNum
Counter32,
hwY1731MulPingRecvTimeDelayMin
Unsigned32,
hwY1731MulPingRecvTimeDelayMax
Unsigned32,
hwY1731MulPingRecvTimeDelayAvg
Unsigned32,
hwY1731MulPingRowStatus
RowStatus
}
hwY1731MulPingIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the index of this table."
::= { hwY1731MulPingEntry 1 }
hwY1731MulPingState OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether the multicast MAC ping function is enabled.
The value can be:
enabled
disabled
By default, the value is disabled.
"
::= { hwY1731MulPingEntry 2 }
hwY1731MulPingMdName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..43))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the name of the MD that initiates the multicast MAC ping."
::= { hwY1731MulPingEntry 3 }
hwY1731MulPingMaName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..43))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the name of the MA that initiates the multicast MAC ping."
::= { hwY1731MulPingEntry 4 }
hwY1731MulPingMepId OBJECT-TYPE
SYNTAX Integer32 (0 | 1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the ID of the local MEP of the 802.1ag
MAC multicast ping operation.
The value ranges from 1 to 8191.
By default, the value is 0.
"
DEFVAL { 0 }
::= { hwY1731MulPingEntry 5 }
hwY1731MulPingTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the timeout period of the multicast MAC ping.
The value ranges from 1 to 65535, in milliseconds.
By default, the value is 5000.
"
DEFVAL { 5000 }
::= { hwY1731MulPingEntry 6 }
hwY1731MulPingCount OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the number of the sent multicast LBM packets.
By default, the value is 3.
"
DEFVAL { 3 }
::= { hwY1731MulPingEntry 7 }
hwY1731MulPingPriority OBJECT-TYPE
SYNTAX Integer32 (0..7 | 255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the priority of the sent LBM packets.
The value ranges from 0 to 7 or can be 255. The value 255 is an invalid value.
The greater the value is, the higher the priority is.
"
DEFVAL { 255 }
::= { hwY1731MulPingEntry 8 }
hwY1731MulPingSendPacketNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of multicast LBM packets that have been sent."
::= { hwY1731MulPingEntry 9 }
hwY1731MulPingRecvPacketNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of multicast LBM packets that have been received."
::= { hwY1731MulPingEntry 10 }
hwY1731MulPingRecvTimeDelayMin OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the minimum delay after which LBR packets are received."
::= { hwY1731MulPingEntry 11 }
hwY1731MulPingRecvTimeDelayMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum delay after which LBR packets are received."
::= { hwY1731MulPingEntry 12 }
hwY1731MulPingRecvTimeDelayAvg OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the average delay after which LBR packets are received."
::= { hwY1731MulPingEntry 13 }
hwY1731MulPingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the row status of this table.
The writable columns in a row can not be changed if the row
is active. All columns MUST have a valid value before a row
can be activated.
"
::= { hwY1731MulPingEntry 99 }
hwY1731MulPingReplyTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwY1731MulPingReplyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to display information about the multicast
LBRs for responding to the multicast MAC ping operation.
"
::= { hwY1731ConfigObject 7 }
hwY1731MulPingReplyEntry OBJECT-TYPE
SYNTAX HwY1731MulPingReplyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of multicast ping reply."
INDEX { hwY1731MulPingReplySeqNumber, hwY1731MulPingReplyOrder }
::= { hwY1731MulPingReplyTable 1 }
HwY1731MulPingReplyEntry ::=
SEQUENCE {
hwY1731MulPingReplySeqNumber
Unsigned32,
hwY1731MulPingReplyOrder
Unsigned32,
hwY1731MulPingReplyMepId
Integer32,
hwY1731MulPingReplyMacAddress
MacAddress,
hwY1731MulPingReplyTransTime
Unsigned32
}
hwY1731MulPingReplySeqNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the sequence number of the multicast LBR."
::= { hwY1731MulPingReplyEntry 1 }
hwY1731MulPingReplyOrder OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the order in which multicast LBRs are received."
::= { hwY1731MulPingReplyEntry 2 }
hwY1731MulPingReplyMepId OBJECT-TYPE
SYNTAX Integer32 (0 | 1..8191)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the MEP ID carried in the multicast LBRs.
The value ranges from 0 to 8191.
The value 0 is an invalid value.
"
::= { hwY1731MulPingReplyEntry 3 }
hwY1731MulPingReplyMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the MAC address carried in the multicast LBRs."
::= { hwY1731MulPingReplyEntry 4 }
hwY1731MulPingReplyTransTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the period from the time when the multicast LBM
is sent to the time when the multicast LBR is received.
"
::= { hwY1731MulPingReplyEntry 5 }
hwY1731AisVlanConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwY1731AisVlanConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the information about the VLAN that
receives AIS frames.
"
::= { hwY1731ConfigObject 8 }
hwY1731AisVlanConfigEntry OBJECT-TYPE
SYNTAX HwY1731AisVlanConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of alarm indication signal about vlan infomation."
INDEX { hwDot1agCfmMdIndex, hwDot1agCfmMaIndex, hwDot1agCfmMepIdentifier, hwY1731AisConfigPeVlan }
::= { hwY1731AisVlanConfigTable 1 }
HwY1731AisVlanConfigEntry ::=
SEQUENCE {
hwY1731AisConfigPeVlan
VlanIdOrNone,
hwY1731AisConfigVlanListLow
OCTET STRING,
hwY1731AisConfigVlanListHigh
OCTET STRING,
hwY1731AisVlanConfigRowStatus
RowStatus
}
hwY1731AisConfigPeVlan OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the ID of the PE VLAN corresponding to the AIS function.
The value 0 indicates that the PE VLAN is not set.
"
::= { hwY1731AisVlanConfigEntry 1 }
hwY1731AisConfigVlanListLow OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If hwY1731AisConfigPeVlan is set to 0, the object indicates a VLAN list corresponding to the AIS function. If its value is not 0, this object indicates a CE VLAN list. The VLAN ID ranges 1 to 2047. The hwY1731AisConfigVlanListHigh value ranges 2048 to 4094.
"
::= { hwY1731AisVlanConfigEntry 2 }
hwY1731AisConfigVlanListHigh OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If hwY1731AisConfigPeVlan is set to 0, the object indicates a VLAN list corresponding to the AIS function. If its value is not 0, this object indicates a CE VLAN list. The VLAN ID ranges 2048 to 4094. The hwY1731AisConfigVlanListLow value ranges value 1 to 2047.
"
::= { hwY1731AisVlanConfigEntry 3 }
hwY1731AisVlanConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the row status of this table.
The writable columns in a row can not be changed if the row
is active. All columns MUST have a valid value before a row
can be activated."
::= { hwY1731AisVlanConfigEntry 4 }
hwY1731StatisticObject OBJECT IDENTIFIER ::= { hwEthOamY1731 2 }
hwY1731ResetStatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwY1731ResetStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to reset statistic information.
"
::= { hwY1731StatisticObject 1 }
hwY1731ResetStatisticEntry OBJECT-TYPE
SYNTAX HwY1731ResetStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of reset statistic information."
INDEX { hwDot1agCfmMdIndex, hwDot1agCfmMaIndex, hwY1731RemoteIp, hwY1731VcId, hwY1731MacAddress, hwY1731ResvIndex }
::= { hwY1731ResetStatisticTable 1 }
HwY1731ResetStatisticEntry ::=
SEQUENCE {
hwY1731ResetStatisticType
INTEGER,
hwY1731ResetStatistic8021pValue
Integer32
}
hwY1731ResetStatisticType OBJECT-TYPE
SYNTAX INTEGER
{
invalid(1),
singleloss(2),
dualloss(3),
onewaydelay(4),
twowaydelay(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the type of reset.
The value can be:
invalid
singleloss
dualloss
onewaydelay
twowaydelay
The default value is invalid."
::= { hwY1731ResetStatisticEntry 1 }
hwY1731ResetStatistic8021pValue OBJECT-TYPE
SYNTAX Integer32 (0 | 1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the priority of 802.1p which in the ResetStatistic.
The priority value ranges from 0 to 7. It maps a 8 bits number.
0 - 1 (0x01)
1 - 2 (0x02)
2 - 4 (0x04)
3 - 8 (0x08)
4 - 16 (0x10)
5 - 32 (0x20)
6 - 64 (0x40)
7 - 128(0x80)
For example, if 802.1p priority is 0 , 4 , 7, the value is 145(1 + 16 + 128).
The value 0 indicates that the priority is not set.
In the case of on-demand OAM, this object is not required.
"
::= { hwY1731ResetStatisticEntry 2 }
hwY1731StatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwY1731StatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to store the result about Y1731 statistic information.
"
::= { hwY1731StatisticObject 2 }
hwY1731StatisticEntry OBJECT-TYPE
SYNTAX HwY1731StatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information on the Y1731 statistic entity."
INDEX { hwDot1agCfmMdIndex, hwDot1agCfmMaIndex, hwY1731RemoteIp, hwY1731VcId, hwY1731MacAddress, hwY1731ResvIndex }
::= { hwY1731StatisticTable 1 }
HwY1731StatisticEntry ::=
SEQUENCE {
hwY1731SingleLossStatisticGatherInterval
INTEGER,
hwY1731SingleLossLocalStatistic
OCTET STRING,
hwY1731SingleLossLocalRatio
OCTET STRING,
hwY1731SingleLossLocalRatioMax
Integer32,
hwY1731SingleLossLocalRatioMin
Integer32,
hwY1731SingleLossLocalRatioAvg
Integer32,
hwY1731SingleLossRemoteStatistic
OCTET STRING,
hwY1731SingleLossRemoteRatio
OCTET STRING,
hwY1731SingleLossRemoteRatioMax
Integer32,
hwY1731SingleLossRemoteRatioMin
Integer32,
hwY1731SingleLossRemoteRatioAvg
Integer32,
hwY1731OneDelayStatistic
OCTET STRING,
hwY1731OneDelayVariation
OCTET STRING,
hwY1731OneDelayMax
Unsigned32,
hwY1731OneDelayMin
Unsigned32,
hwY1731OneDelayAvg
Unsigned32,
hwY1731TwoDelayStatistic
OCTET STRING,
hwY1731TwoDelayVariation
OCTET STRING,
hwY1731TwoDelayMax
Unsigned32,
hwY1731TwoDelayMin
Unsigned32,
hwY1731TwoDelayAvg
Unsigned32,
hwY1731SingleLossLocalMax
Unsigned32,
hwY1731SingleLossLocalMin
Unsigned32,
hwY1731SingleLossLocalAvg
Unsigned32,
hwY1731SingleLossRemoteMax
Unsigned32,
hwY1731SingleLossRemoteMin
Unsigned32,
hwY1731SingleLossRemoteAvg
Unsigned32,
hwY1731OneDelayStatisticMax
Integer32,
hwY1731OneDelayStatisticMin
Integer32,
hwY1731OneDelayStatisticAvg
Integer32,
hwY1731TwoDelayStatisticMax
Unsigned32,
hwY1731TwoDelayStatisticMin
Unsigned32,
hwY1731TwoDelayStatisticAvg
Unsigned32,
hwY1731TwoDelayUnresponsivePacketCount
Unsigned32
}
hwY1731SingleLossStatisticGatherInterval OBJECT-TYPE
SYNTAX INTEGER
{
invalid(1),
interval1000ms(2),
interval10000ms(3),
interval30000ms(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies an interval for collecting packet loss statistics."
::= { hwY1731StatisticEntry 1 }
hwY1731SingleLossLocalStatistic OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the packet loss statistics that are collected on a local end."
::= { hwY1731StatisticEntry 2 }
hwY1731SingleLossLocalRatio OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the packet loss ratio that are collected on a local end."
::= { hwY1731StatisticEntry 3 }
hwY1731SingleLossLocalRatioMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the maximum value of packet loss ratio
that are collected on a local end."
::= { hwY1731StatisticEntry 4 }
hwY1731SingleLossLocalRatioMin OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the minimum value of packet loss ratio
that are collected on a local end."
::= { hwY1731StatisticEntry 5 }
hwY1731SingleLossLocalRatioAvg OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the average value of packet loss ratio
that are collected on a local end."
::= { hwY1731StatisticEntry 6 }
hwY1731SingleLossRemoteStatistic OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the packet loss statistics that are collected on a remote end."
::= { hwY1731StatisticEntry 7 }
hwY1731SingleLossRemoteRatio OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the packet loss ratio that are collected on a remote end."
::= { hwY1731StatisticEntry 8 }
hwY1731SingleLossRemoteRatioMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the maximum value of packet loss ratio
that are collected on a remote end."
::= { hwY1731StatisticEntry 9 }
hwY1731SingleLossRemoteRatioMin OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the minimum value of packet loss ratio
that are collected on a remote end."
::= { hwY1731StatisticEntry 10 }
hwY1731SingleLossRemoteRatioAvg OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the average value of packet loss ratio
that are collected on a remote end."
::= { hwY1731StatisticEntry 11 }
hwY1731OneDelayStatistic OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the statistics about the one-way delay."
::= { hwY1731StatisticEntry 12 }
hwY1731OneDelayVariation OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the variation about the one-way delay.
After the device is enabled to receive packets, statistics collected for the first time are invalid, and the value of hwY1731OneDelayVariation is setted to 0.
"
::= { hwY1731StatisticEntry 13 }
hwY1731OneDelayMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the maximum variation of the one-way delay."
::= { hwY1731StatisticEntry 14 }
hwY1731OneDelayMin OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the minimum variation of the one-way delay."
::= { hwY1731StatisticEntry 15 }
hwY1731OneDelayAvg OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the average variation of the one-way delay."
::= { hwY1731StatisticEntry 16 }
hwY1731TwoDelayStatistic OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the statistics about the two-way delay."
::= { hwY1731StatisticEntry 17 }
hwY1731TwoDelayVariation OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the variation about the two-way delay."
::= { hwY1731StatisticEntry 18 }
hwY1731TwoDelayMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the maximum variation of the two-way delay."
::= { hwY1731StatisticEntry 19 }
hwY1731TwoDelayMin OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the minimum variation of the two-way delay."
::= { hwY1731StatisticEntry 20 }
hwY1731TwoDelayAvg OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the average variation of the two-way delay."
::= { hwY1731StatisticEntry 21 }
hwY1731SingleLossLocalMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the maximum value of packet loss
that are collected on a local end."
::= { hwY1731StatisticEntry 22 }
hwY1731SingleLossLocalMin OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the minimum value of packet loss
that are collected on a local end."
::= { hwY1731StatisticEntry 23 }
hwY1731SingleLossLocalAvg OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the average value of packet loss
that are collected on a local end."
::= { hwY1731StatisticEntry 24 }
hwY1731SingleLossRemoteMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the maximum value of packet loss
that are collected on a remote end."
::= { hwY1731StatisticEntry 25 }
hwY1731SingleLossRemoteMin OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the minimum value of packet loss
that are collected on a remote end."
::= { hwY1731StatisticEntry 26 }
hwY1731SingleLossRemoteAvg OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the average value of packet loss
that are collected on a remote end."
::= { hwY1731StatisticEntry 27 }
hwY1731OneDelayStatisticMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the maximum value of the one-way delay."
::= { hwY1731StatisticEntry 28 }
hwY1731OneDelayStatisticMin OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the minimum value of the one-way delay."
::= { hwY1731StatisticEntry 29 }
hwY1731OneDelayStatisticAvg OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the average value of the one-way delay."
::= { hwY1731StatisticEntry 30 }
hwY1731TwoDelayStatisticMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the maximum value of the two-way delay."
::= { hwY1731StatisticEntry 31 }
hwY1731TwoDelayStatisticMin OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the minimum value of the two-way delay."
::= { hwY1731StatisticEntry 32 }
hwY1731TwoDelayStatisticAvg OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the average value of the two-way delay."
::= { hwY1731StatisticEntry 33 }
hwY1731TwoDelayUnresponsivePacketCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the number of unresponsive Delay Measurement Reply frames."
::= { hwY1731StatisticEntry 34 }
hwCfmVlanOneDelayTrapLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCfmVlanOneDelayTrapLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to query whether the one-way delay exceeds
the trap threshold in the VLAN scenario."
::= { hwY1731StatisticObject 3 }
hwCfmVlanOneDelayTrapLogEntry OBJECT-TYPE
SYNTAX HwCfmVlanOneDelayTrapLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
An entry in the table, containing information on the trap entity.
"
INDEX { hwDot1agCfmMdIndex , hwDot1agCfmMaIndex }
::= { hwCfmVlanOneDelayTrapLogTable 1 }
HwCfmVlanOneDelayTrapLogEntry ::=
SEQUENCE {
hwCfmOneDelayTrapLogMacAddress
MacAddress,
hwCfmVlanOneDelayTrapLogTimestamp
TimeStamp,
hwCfmVlanOneDelayTrapLogDelayValue
Unsigned32,
hwCfmVlanOneDelayTrapLogThreshold
Unsigned32
}
hwCfmOneDelayTrapLogMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
This object indicates the remote MAC address.
"
::= { hwCfmVlanOneDelayTrapLogEntry 1 }
hwCfmVlanOneDelayTrapLogTimestamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
This object indicates the timestamp when the delay of the one-way ETH-DM
in the VLAN is higher than the configured trap threshold.
"
::= { hwCfmVlanOneDelayTrapLogEntry 2 }
hwCfmVlanOneDelayTrapLogDelayValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
This object indicates the delay value when the delay of the one-way ETH-DM
in the VLAN is higher than the configured trap threshold.
"
::= { hwCfmVlanOneDelayTrapLogEntry 3 }
hwCfmVlanOneDelayTrapLogThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
This object indicates the delay trap threshold of the one-way ETH-DM.
"
::= { hwCfmVlanOneDelayTrapLogEntry 4 }
hwCfmVlanOneDelayRcoverTrapLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCfmVlanOneDelayRcoverTrapLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to query whether the one-way delay falls below
the trap threshold."
::= { hwY1731StatisticObject 4 }
hwCfmVlanOneDelayRcoverTrapLogEntry OBJECT-TYPE
SYNTAX HwCfmVlanOneDelayRcoverTrapLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
An entry in the table, containing information on the recovery trap entity.
"
INDEX { hwDot1agCfmMdIndex , hwDot1agCfmMaIndex }
::= { hwCfmVlanOneDelayRcoverTrapLogTable 1 }
HwCfmVlanOneDelayRcoverTrapLogEntry ::=
SEQUENCE {
hwCfmOneDelayRecoveryTrapMacAddress
MacAddress,
hwCfmVlanOneDelayRecoveryTrapLogTimestamp
TimeStamp,
hwCfmVlanOneDelayRecoveryTrapLogDelayValue
Unsigned32,
hwCfmVlanOneDelayRecoveryTrapLogThreshold
Unsigned32
}
hwCfmOneDelayRecoveryTrapMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
This object indicates the remote MAC address.
"
::= { hwCfmVlanOneDelayRcoverTrapLogEntry 1 }
hwCfmVlanOneDelayRecoveryTrapLogTimestamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
This object indicates the timestamp when the delay of the one-way ETH-DM
in the VLAN is lower than the configured trap threshold.
"
::= { hwCfmVlanOneDelayRcoverTrapLogEntry 2 }
hwCfmVlanOneDelayRecoveryTrapLogDelayValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
This object indicates the delay value when the delay of the one-way ETH-DM
in the VLAN is lower than the configured trap threshold.
"
::= { hwCfmVlanOneDelayRcoverTrapLogEntry 3 }
hwCfmVlanOneDelayRecoveryTrapLogThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
This object indicates the delay trap threshold of the one-way ETH-DM.
"
::= { hwCfmVlanOneDelayRcoverTrapLogEntry 4 }
hwCfmVlanTwoDelayTrapLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCfmVlanTwoDelayTrapLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to query whether the two-way delay exceeds
the trap threshold in the VLAN scenario."
::= { hwY1731StatisticObject 5 }
hwCfmVlanTwoDelayTrapLogEntry OBJECT-TYPE
SYNTAX HwCfmVlanTwoDelayTrapLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
An entry in the table, containing information on the trap entity.
"
INDEX { hwDot1agCfmMdIndex , hwDot1agCfmMaIndex }
::= { hwCfmVlanTwoDelayTrapLogTable 1 }
HwCfmVlanTwoDelayTrapLogEntry ::=
SEQUENCE {
hwCfmTwoDelayTrapMacAddress
MacAddress,
hwCfmVlanTwoDelayTrapLogTimestamp
TimeStamp,
hwCfmVlanTwoDelayTrapLogDelayValue
Unsigned32,
hwCfmVlanTwoDelayTrapLogThreshold
Unsigned32
}
hwCfmTwoDelayTrapMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
This object indicates the remote MAC address.
"
::= { hwCfmVlanTwoDelayTrapLogEntry 1 }
hwCfmVlanTwoDelayTrapLogTimestamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
This object indicates the timestamp when the delay of the two-way ETH-DM
in the VLAN is higher than the configured trap threshold.
"
::= { hwCfmVlanTwoDelayTrapLogEntry 2 }
hwCfmVlanTwoDelayTrapLogDelayValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
This object indicates the delay value when the delay of the two-way ETH-DM
in the VLAN is higher than the configured trap threshold.
"
::= { hwCfmVlanTwoDelayTrapLogEntry 3 }
hwCfmVlanTwoDelayTrapLogThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
This object indicates the delay trap threshold of the two-way ETH-DM.
"
::= { hwCfmVlanTwoDelayTrapLogEntry 4 }
hwCfmVlanTwoDelayRcoverTrapLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCfmVlanTwoDelayRcoverTrapLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to query whether the two-way delay falls below
the trap threshold."
::= { hwY1731StatisticObject 6 }
hwCfmVlanTwoDelayRcoverTrapLogEntry OBJECT-TYPE
SYNTAX HwCfmVlanTwoDelayRcoverTrapLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
An entry in the table, containing information on the recovery trap entity.
"
INDEX { hwDot1agCfmMdIndex , hwDot1agCfmMaIndex }
::= { hwCfmVlanTwoDelayRcoverTrapLogTable 1 }
HwCfmVlanTwoDelayRcoverTrapLogEntry ::=
SEQUENCE {
hwCfmTwoDelayRecoveryTrapMacAddress
MacAddress,
hwCfmVlanTwoDelayRecoveryTrapLogTimestamp
TimeStamp,
hwCfmVlanTwoDelayRecoveryTrapLogDelayValue
Unsigned32,
hwCfmVlanTwoDelayRecoveryTrapLogThreshold
Unsigned32
}
hwCfmTwoDelayRecoveryTrapMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
This object indicates the remote MAC address.
"
::= { hwCfmVlanTwoDelayRcoverTrapLogEntry 1 }
hwCfmVlanTwoDelayRecoveryTrapLogTimestamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
This object indicates the timestamp when the delay of the two-way ETH-DM
in the VLAN is lower than the configured trap threshold.
"
::= { hwCfmVlanTwoDelayRcoverTrapLogEntry 2 }
hwCfmVlanTwoDelayRecoveryTrapLogDelayValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
This object indicates the delay value when the delay of the two-way ETH-DM
in the VLAN is lower than the configured trap threshold.
"
::= { hwCfmVlanTwoDelayRcoverTrapLogEntry 3 }
hwCfmVlanTwoDelayRecoveryTrapLogThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
This object indicates the delay trap threshold for the two-way ETH-DM.
"
::= { hwCfmVlanTwoDelayRcoverTrapLogEntry 4 }
hwY1731AisMaxPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The MAXIMUM of AIS packets transmitted in one second."
::= { hwEthOamY1731 3 }
END
View Git Blame Copy Permalink