x
/
compass-core
Code Issues Proposed changes
compass-core/mibs/HUAWEI-L2VLAN-MIB.mib

5020 lines
161 KiB
Plaintext
Raw Permalink Blame History

--==================================================================
-- Copyright (C) 2002 by HUAWEI TECHNOLOGIES. All rights reserved.
--
-- Description: HUAWEI Layer Two VLAN MIB
-- Reference:
-- Version: V1.0
-- History:
-- ==================================================================
-- ==================================================================
--
-- Varibles and types be imported
--
-- ==================================================================
HUAWEI-L2VLAN-MIB DEFINITIONS ::= BEGIN
IMPORTS
RowStatus,MacAddress,TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-IDENTITY, OBJECT-TYPE, Integer32, OBJECT-IDENTITY, TimeTicks,
NOTIFICATION-TYPE, Counter64, IpAddress, Gauge32
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
hwDatacomm
FROM HUAWEI-MIB
VlanId, PortList, VlanIndex, VlanIdOrNone
FROM Q-BRIDGE-MIB
ifIndex,InterfaceIndex
FROM IF-MIB
EnabledStatus
FROM P-BRIDGE-MIB
hwBaseTrapSeverity, hwBaseTrapProbableCause, hwBaseTrapEventType
FROM HUAWEI-BASE-TRAP-MIB;
hwL2Mgmt OBJECT IDENTIFIER ::= { hwDatacomm 42 }
hwL2Vlan MODULE-IDENTITY
LAST-UPDATED "200701121830Z"
ORGANIZATION
"Huawei Technologies co.,Ltd."
CONTACT-INFO
"VRP Team Huawei Technologies co.,Ltd.
Huawei Bld.,NO.3 Xinxi Rd.,
Shang-Di Information Industry Base,
Hai-Dian District Beijing P.R. China
http://www.huawei.com
Zip:100085
"
DESCRIPTION
"The L2Vlan MIB module is defined to manage several layer two function of Huawei Technologies co.,Ltd."
::= { hwL2Mgmt 3 }
-- ==================================================================
--
-- ======================= definition begin =========================
--
-- ==================================================================
hwL2VlanMngObjects OBJECT IDENTIFIER ::= { hwL2Vlan 1 }
-- -------------------------------------------------------------
-- groups in the hwL2Vlan MIB
-- -------------------------------------------------------------
hwL2VlanBase OBJECT IDENTIFIER ::= { hwL2VlanMngObjects 1 }
hwL2VlanApply OBJECT IDENTIFIER ::= { hwL2VlanMngObjects 2 }
hwL2VlanStatistics OBJECT IDENTIFIER ::= { hwL2VlanMngObjects 3 }
hwL2VlanMIBTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanMIBEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains basic information for this vlan."
::= { hwL2VlanBase 1 }
hwL2VlanMIBEntry OBJECT-TYPE
SYNTAX HwL2VlanMIBEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of vlan MIB table."
INDEX { hwL2VlanIndex }
::= { hwL2VlanMIBTable 1}
HwL2VlanMIBEntry ::=
SEQUENCE {
hwL2VlanIndex VlanId ,
hwL2VlanDescr OCTET STRING ,
hwL2VlanPortList PortList ,
hwL2VlanType INTEGER ,
hwL2VlanUnknownUnicastProcessing INTEGER ,
hwL2VlanIfIndex Integer32,
hwL2VlanMacLearn EnabledStatus ,
hwL2VlanMulticast EnabledStatus,
hwL2VlanAdminStatus EnabledStatus,
hwL2VlanStatisStatus EnabledStatus,
hwL2VlanCreateStatus INTEGER ,
hwL2VlanRowStatus RowStatus ,
hwL2VlanBcast EnabledStatus,
hwL2VlanUnknownMulticastProcessing INTEGER,
hwL2VlanProperty INTEGER,
hwL2VlanAgingTime Integer32,
hwL2VlanName OCTET STRING,
hwL2VlanSmartMacLearn EnabledStatus,
hwL2VlanServiceName OCTET STRING,
hwL2VlanManagementVlan EnabledStatus,
hwL2VlanDynamicVlan EnabledStatus
}
hwL2VlanIndex OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vlan-id or other identifier referring to this vlan."
::= { hwL2VlanMIBEntry 1 }
hwL2VlanDescr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..80))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description of the vlan."
::= { hwL2VlanMIBEntry 2 }
hwL2VlanPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of Ports which belong to the vlan."
::= { hwL2VlanMIBEntry 3 }
hwL2VlanType OBJECT-TYPE
SYNTAX INTEGER
{
superVlan (1),
commonVlan (2),
subVlan (3),
muxVlan (4),
muxSubVlan (5),
protocolTransVlan (6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Change the value from '2' to '1' indicates that the common-vlan is configured into super-vlan;
Change the value from '1' to '2' indicates that the super-vlan is canceled;
Change the value from '2' to '4' indicates that the common-vlan is configured into mux-vlan;
Change the value from '4' to '2' indicates that the mux-vlan is canceled;
Change the value from '2' to '6' indicates that the common-vlan is configured into protocol-transparent-vlan;
Change the value from '6' to '2' indicates that the protocol-transparent-vlan is canceled;
Note that the switch between other pairs is forbidden."
::= { hwL2VlanMIBEntry 4 }
hwL2VlanUnknownUnicastProcessing OBJECT-TYPE
SYNTAX INTEGER
{
broadcast (1),
discard (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether to broadcast the unknown unicast packets when ports receive it.
broadcast(1) indicates broadcast the packets, discard(2) indicates it's closed.
Default value is broadcast(1)."
::= { hwL2VlanMIBEntry 5 }
hwL2VlanIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION " Whether vlan interface is configured on vlan. If vlan interface is configured,
the value of the node is InterfaceIndex, else the value is -1. "
::= { hwL2VlanMIBEntry 6 }
hwL2VlanMacLearn OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value indicates whether the MAC address learning is opened. The value enabled(1) indicates learning is allowed.
Just the common vlan and Sub-vlan have the attribute. Default value is enabled(1)."
::= { hwL2VlanMIBEntry 7 }
hwL2VlanMulticast OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value enabled(1) indicates vlan Multicasting is allowed; disable(2) indicates it's closed. The default value is disable(2)."
::= { hwL2VlanMIBEntry 8 }
hwL2VlanAdminStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Value disable(2) indicates shutdown the vlan; enabled(1) indicates open the vlan."
DEFVAL {1}
::= { hwL2VlanMIBEntry 9 }
hwL2VlanStatisStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value enabled(1) indicates Statistics on vlan are allowed; disable(2) indicates aren't.
The default value is disable(2)."
DEFVAL {2}
::= { hwL2VlanMIBEntry 10 }
hwL2VlanCreateStatus OBJECT-TYPE
SYNTAX INTEGER
{
other (1),
static (2),
dynamic (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status indicates how the vlan is created,
static configured by management or created dynamicly by GVRP."
::= { hwL2VlanMIBEntry 11 }
hwL2VlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Operation status."
::= { hwL2VlanMIBEntry 12 }
hwL2VlanBcast OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether to broadcast the broadcast packets when ports receive it.
enabled(1) indicates broadcast the packets,disable(2) indicates it'll discard
the broadcast packet. Default value is enabled(1)."
::= { hwL2VlanMIBEntry 13 }
hwL2VlanUnknownMulticastProcessing OBJECT-TYPE
SYNTAX INTEGER
{
broadcast (1),
discard (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether to broadcast the unknown multicast packets when ports receive it.
broadcast(1) indicates broadcast the packet, discard(2) indicates it'll discard
the unknow multicast packet. Default value is broadcast(1)."
::= { hwL2VlanMIBEntry 14 }
hwL2VlanProperty OBJECT-TYPE
SYNTAX INTEGER
{
default(1),
backboneVlan(2),
mutilcastVlan(3),
userVlan(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Property of Vlan: backboneVlan(2) used by PBT application,
mutilcastVlan(3) used by Mutilcast Vlan, userVlan(4) used by users' vlan,
and Default(1) means no special apply."
::= { hwL2VlanMIBEntry 15 }
hwL2VlanAgingTime OBJECT-TYPE
SYNTAX Integer32(60..1000000 | 0 | -1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The aging time of MAC entry that associated with the vlan.'0' means
will be never aged,'-1' means aging-time is not configured to the vlan."
::= { hwL2VlanMIBEntry 16 }
hwL2VlanName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Name of the vlan."
::= { hwL2VlanMIBEntry 17 }
hwL2VlanSmartMacLearn OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value indicates whether the MAC address learning is opened, when the number of the port which is up state and belonging to the vlan is below and equal to two. The value enabled(1) indicates learning is not allowed, when the number of the port which is up state and belonging to the vlan is below and equal to two.
Just the common vlan and Sub-vlan have the attribute. Default value is disable(0)."
::= { hwL2VlanMIBEntry 18 }
hwL2VlanServiceName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Service name of the vlan."
::= { hwL2VlanMIBEntry 19 }
hwL2VlanManagementVlan OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the VLAN is management VLAN."
::= { hwL2VlanMIBEntry 20 }
hwL2VlanDynamicVlan OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the VLAN is dynamic VLAN."
::= { hwL2VlanMIBEntry 21 }
hwL2VlanStackingTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanStackingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"QinQ-port configuration table."
::= { hwL2VlanApply 1 }
hwL2VlanStackingEntry OBJECT-TYPE
SYNTAX HwL2VlanStackingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"QinQ-port configuration table."
INDEX { hwL2VlanStackingPortIndex, hwL2VlanStackingInsideVlanId }
::= { hwL2VlanStackingTable 1}
HwL2VlanStackingEntry ::=
SEQUENCE {
hwL2VlanStackingPortIndex Integer32,
hwL2VlanStackingInsideVlanId VlanId,
hwL2VlanStackingOutsideVlanListLow OCTET STRING,
hwL2VlanStackingOutsideVlanListHigh OCTET STRING,
hwL2VlanStackingRowStatus RowStatus
}
hwL2VlanStackingPortIndex OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index number of QinQ-port."
::= { hwL2VlanStackingEntry 1 }
hwL2VlanStackingInsideVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Inside vlan-id of QinQ-port, use it as the Index."
::= { hwL2VlanStackingEntry 2 }
hwL2VlanStackingOutsideVlanListLow OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The possible value of the outside vlan-id list."
::= { hwL2VlanStackingEntry 3 }
hwL2VlanStackingOutsideVlanListHigh OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The possible value of the outside vlan-id list."
::= { hwL2VlanStackingEntry 4 }
hwL2VlanStackingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This table can be created."
::= { hwL2VlanStackingEntry 5 }
hwL2VlanMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration table."
::= { hwL2VlanApply 2 }
hwL2VlanMappingEntry OBJECT-TYPE
SYNTAX HwL2VlanMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"QinQ-port configuration table."
INDEX { hwL2VlanMappingPortIndex, hwL2VlanMappingInsideVlanId }
::= { hwL2VlanMappingTable 1}
HwL2VlanMappingEntry ::=
SEQUENCE {
hwL2VlanMappingPortIndex Integer32,
hwL2VlanMappingInsideVlanId VlanId,
hwL2VlanMappingOutsideVlanListLow OCTET STRING,
hwL2VlanMappingOutsideVlanListHigh OCTET STRING,
hwL2VlanMappingRowStatus RowStatus
}
hwL2VlanMappingPortIndex OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index number of QinQ-port."
::= { hwL2VlanMappingEntry 1 }
hwL2VlanMappingInsideVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Inside vlan-id of QinQ-port ,use it as the Index."
::= { hwL2VlanMappingEntry 2 }
hwL2VlanMappingOutsideVlanListLow OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The possible value of the outside vlan-id list."
::= { hwL2VlanMappingEntry 3 }
hwL2VlanMappingOutsideVlanListHigh OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The possible value of the outside vlan-id list."
::= { hwL2VlanMappingEntry 4 }
hwL2VlanMappingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This table can be created."
::= { hwL2VlanMappingEntry 5 }
hwSuperVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwSuperVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains configuration and control information for the super vlan."
::= { hwL2VlanApply 3 }
hwSuperVlanEntry OBJECT-TYPE
SYNTAX HwSuperVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the super vlan table."
INDEX { hwSuperVlanId }
::= { hwSuperVlanTable 1 }
HwSuperVlanEntry ::=
SEQUENCE {
hwSuperVlanId VlanId,
hwSubVlanListLow OCTET STRING,
hwSubVlanListHigh OCTET STRING
}
hwSuperVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The super vlan-id."
::= { hwSuperVlanEntry 1 }
hwSubVlanListLow OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lowest possible value of the sub vlan list on the supervlan."
::= { hwSuperVlanEntry 2 }
hwSubVlanListHigh OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The highest possible value of the sub vlan list on the supervlan."
::= { hwSuperVlanEntry 3 }
hwL2InterfIsolateTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2InterfIsolateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains configuration and control information for interfaces isolate."
::= { hwL2VlanApply 4 }
hwL2InterfIsolateEntry OBJECT-TYPE
SYNTAX HwL2InterfIsolateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Secondary vlan lists of Isolate-vlans."
INDEX { hwL2InterfIsolateVlanId }
::= { hwL2InterfIsolateTable 1}
HwL2InterfIsolateEntry ::=
SEQUENCE
{
hwL2InterfIsolateVlanId VlanId ,
hwL2InterfIsolateInterflistLow OCTET STRING,
hwL2InterfIsolateInterflistHigh OCTET STRING
}
hwL2InterfIsolateVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vlan-id. The vlan into which interf-isolate is configured."
::= { hwL2InterfIsolateEntry 1 }
hwL2InterfIsolateInterflistLow OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (65))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lowest possible value of Interface list on the vlan."
::= { hwL2InterfIsolateEntry 2 }
hwL2InterfIsolateInterflistHigh OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (65))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The highest possible value of Interface list on the vlan."
::= { hwL2InterfIsolateEntry 3 }
hwL2IsolatemappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2IsolatemappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains mapping information between isolated ports."
::= { hwL2VlanApply 5 }
hwL2IsolatemappingEntry OBJECT-TYPE
SYNTAX HwL2IsolatemappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { hwL2IsolatemappingPortNum }
::= { hwL2IsolatemappingTable 1}
HwL2IsolatemappingEntry ::=
SEQUENCE
{
hwL2IsolatemappingPortNum Integer32,
hwL2IsolateInterflistLow OCTET STRING,
hwL2IsolateInterflistHigh OCTET STRING
}
hwL2IsolatemappingPortNum OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port number."
::= { hwL2IsolatemappingEntry 1 }
hwL2IsolateInterflistLow OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lowest possible value of Interface list."
::= { hwL2IsolatemappingEntry 2 }
hwL2IsolateInterflistHigh OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The highest possible value of Interface."
::= { hwL2IsolatemappingEntry 3 }
hwL2VlanStackingExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanStackingExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { hwL2VlanApply 6 }
hwL2VlanStackingExtEntry OBJECT-TYPE
SYNTAX HwL2VlanStackingExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { hwL2VlanStackingExtPortIndex, hwL2VlanStackingExtVlanId,hwL2VlanStackingExtAction, hwL2VlanStackingExtDirection}
::= { hwL2VlanStackingExtTable 1}
HwL2VlanStackingExtEntry ::=
SEQUENCE {
hwL2VlanStackingExtPortIndex InterfaceIndex,
hwL2VlanStackingExtVlanId VlanIdOrNone,
hwL2VlanStackingExtAction INTEGER,
hwL2VlanStackingExtDirection INTEGER,
hwL2VlanStackingExtVlanListLow OCTET STRING,
hwL2VlanStackingExtVlanListHigh OCTET STRING,
hwL2VlanStackingExtRowStatus RowStatus,
hwL2VlanStackingExtPriorityMode INTEGER,
hwL2VlanStackingExtVlan8021p Integer32
}
hwL2VlanStackingExtPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configured QinQ-Port Index."
::= { hwL2VlanStackingExtEntry 1 }
hwL2VlanStackingExtVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This vlan-id need be poped or pushed in interface."
::= { hwL2VlanStackingExtEntry 2 }
hwL2VlanStackingExtAction OBJECT-TYPE
SYNTAX INTEGER
{
pop (1),
push (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The packet will be poped or pushed."
::= { hwL2VlanStackingExtEntry 3}
hwL2VlanStackingExtDirection OBJECT-TYPE
SYNTAX INTEGER
{
inside (1),
outside (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The direction which the packet need be poped or pushed.
That is, the packet is receviced or transitted."
::= { hwL2VlanStackingExtEntry 4}
hwL2VlanStackingExtVlanListLow OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If hwL2VlanStackingBothAction is pop, the packet
which has hwL2VlanStackingBothPopOrPushVlanId will
be taken tag away. If hwL2VlanStackingBothAction is push, the packet
will be added tag which is hwL2VlanStackingBothPopOrPushVlanId."
::= { hwL2VlanStackingExtEntry 5 }
hwL2VlanStackingExtVlanListHigh OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If hwL2VlanStackingBothAction is pop, the packet
which has hwL2VlanStackingBothPopOrPushVlanId will
be taken tag away. If hwL2VlanStackingBothAction is push, the packet
will be added tag which is hwL2VlanStackingBothPopOrPushVlanId."
::= { hwL2VlanStackingExtEntry 6 }
hwL2VlanStackingExtRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This table can be created."
::= { hwL2VlanStackingExtEntry 7 }
hwL2VlanStackingExtPriorityMode OBJECT-TYPE
SYNTAX INTEGER
{
priorityInherit (1),
remark8021p (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority mode of outer VLAN, the priority can be appointed or
inherit from inner VLAN's priority."
DEFVAL {priorityInherit}
::= { hwL2VlanStackingExtEntry 8 }
hwL2VlanStackingExtVlan8021p OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The 8021p of outer VLAN ID after pushing, it's an optional field,
its default value is 0."
DEFVAL {0}
::= { hwL2VlanStackingExtEntry 9 }
hwL2VlanQinQTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanQinQEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains global view configuration information for Flexible QinQ."
::= { hwL2VlanApply 7 }
hwL2VlanQinQEntry OBJECT-TYPE
SYNTAX HwL2VlanQinQEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Flexible QinQ configuration Entry."
INDEX { hwL2VlanQinQIndex,hwL2VlanQinQDirection }
::= { hwL2VlanQinQTable 1}
HwL2VlanQinQEntry ::=
SEQUENCE {
hwL2VlanQinQIndex Integer32 ,
hwL2VlanQinQDirection INTEGER ,
hwL2VlanQinQOutSideVlanId VlanId ,
hwL2VlanSysQinQRowStatus RowStatus
}
hwL2VlanQinQIndex OBJECT-TYPE
SYNTAX Integer32(0..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index number of Flexible QinQ."
::= { hwL2VlanQinQEntry 1 }
hwL2VlanQinQDirection OBJECT-TYPE
SYNTAX INTEGER
{
inbound (1),
outbound (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Inbound or outbound direction for VPN instance."
::= { hwL2VlanQinQEntry 2 }
hwL2VlanQinQOutSideVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Outside vlan-id for ISP."
::= { hwL2VlanQinQEntry 3 }
hwL2VlanSysQinQRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The table contains interface view configuration information for Flexible QinQ."
::= { hwL2VlanQinQEntry 4 }
hwL2VlanInterfaceQinQTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanInterfaceQinQEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface view Flexible QinQ configuration table."
::= { hwL2VlanApply 8 }
hwL2VlanInterfaceQinQEntry OBJECT-TYPE
SYNTAX HwL2VlanInterfaceQinQEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface view Flexible QinQ configuration entry."
INDEX { hwL2VlanQinQInterfaceIndex,hwL2VlanQinQIndex,hwL2VlanQinQCVlanId,hwL2VlanQinQDirection }
::= { hwL2VlanInterfaceQinQTable 1}
HwL2VlanInterfaceQinQEntry ::=
SEQUENCE {
hwL2VlanQinQInterfaceIndex InterfaceIndex ,
hwL2VlanQinQCVlanId VlanId ,
hwL2VlanQinQSVlanId VlanId ,
hwL2VlanQinQAction INTEGER ,
hwL2VlanQinQNewCVlanId VlanId ,
hwL2VlanInterfaceQinQRowStatus RowStatus
}
hwL2VlanQinQInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface index."
::= { hwL2VlanInterfaceQinQEntry 1 }
hwL2VlanQinQCVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Client vlan-id."
::= { hwL2VlanInterfaceQinQEntry 2 }
hwL2VlanQinQSVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Internet service provide vlan-id"
::= { hwL2VlanInterfaceQinQEntry 3 }
hwL2VlanQinQAction OBJECT-TYPE
SYNTAX INTEGER
{
push (1),
nop (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Action push or nop."
::= { hwL2VlanInterfaceQinQEntry 4 }
hwL2VlanQinQNewCVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Replaced of new client vlan-id."
::= { hwL2VlanInterfaceQinQEntry 5 }
hwL2VlanInterfaceQinQRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This table can be created."
::= { hwL2VlanInterfaceQinQEntry 6 }
hwL2DVlanMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2DVlanMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains double Vlan-Mapping."
::= { hwL2VlanApply 9 }
hwL2DVlanMappingEntry OBJECT-TYPE
SYNTAX HwL2DVlanMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains double Vlan-Mapping entry."
INDEX {hwL2DVlanMappingInterfaceIndex,hwL2DVlanMappingExternalVlanId, hwL2DVlanMappingInternalVlanId,hwL2DVlanMappingDirection}
::= { hwL2DVlanMappingTable 1}
HwL2DVlanMappingEntry ::=
SEQUENCE {
hwL2DVlanMappingInterfaceIndex InterfaceIndex ,
hwL2DVlanMappingExternalVlanId VlanId ,
hwL2DVlanMappingInternalVlanId VlanId ,
hwL2DVlanMappingDirection INTEGER ,
hwL2DVlanMappingMapExternalVlanId VlanId ,
hwL2DVlanMappingMapInternalVlanId VlanId,
hwL2DVlanMappingAction INTEGER ,
hwL2DVlanMappingRowStatus RowStatus
}
hwL2DVlanMappingInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface Index."
::= { hwL2DVlanMappingEntry 1 }
hwL2DVlanMappingExternalVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Service vlan-id."
::= { hwL2DVlanMappingEntry 2 }
hwL2DVlanMappingInternalVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Client vlan-id."
::= { hwL2DVlanMappingEntry 3 }
hwL2DVlanMappingDirection OBJECT-TYPE
SYNTAX INTEGER
{
inbound (1),
outbound (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Direction inbound and outbound."
::= { hwL2DVlanMappingEntry 4 }
hwL2DVlanMappingMapExternalVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Replaced of new service vlan-id."
::= { hwL2DVlanMappingEntry 5 }
hwL2DVlanMappingMapInternalVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Replaced of new client vlan-id."
::= { hwL2DVlanMappingEntry 6 }
hwL2DVlanMappingAction OBJECT-TYPE
SYNTAX INTEGER
{
swap (1),
popExternalVlan (2),
drop (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Action drop, pop-externalvlan and swap."
::= { hwL2DVlanMappingEntry 7 }
hwL2DVlanMappingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Operation status."
::= { hwL2DVlanMappingEntry 8 }
hwL2VlanMappingExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanMappingExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration table."
::= { hwL2VlanApply 10 }
hwL2VlanMappingExtEntry OBJECT-TYPE
SYNTAX HwL2VlanMappingExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains Vlan-Mapping entry."
INDEX { hwL2VlanMappingExtPortIndex,hwL2VlanMappingExtDirection, hwL2VlanMappingExtVlanId }
::= { hwL2VlanMappingExtTable 1}
HwL2VlanMappingExtEntry ::=
SEQUENCE {
hwL2VlanMappingExtPortIndex Integer32,
hwL2VlanMappingExtDirection INTEGER,
hwL2VlanMappingExtVlanId VlanId,
hwL2VlanMappingExtVlanListLow OCTET STRING,
hwL2VlanMappingExtVlanListHigh OCTET STRING,
hwL2VlanMappingExtRowStatus RowStatus,
hwL2VlanMappingExtPriorityMode INTEGER,
hwL2VlanMappingExtVlan8021p Integer32
}
hwL2VlanMappingExtPortIndex OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Index."
::= { hwL2VlanMappingExtEntry 1 }
hwL2VlanMappingExtDirection OBJECT-TYPE
SYNTAX INTEGER
{
inbound (1),
outbound (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Direction inbound and outbound."
::= { hwL2VlanMappingExtEntry 2 }
hwL2VlanMappingExtVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The outside vlan-id."
::= { hwL2VlanMappingExtEntry 3 }
hwL2VlanMappingExtVlanListLow OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The possible value of the inside vlan list."
::= { hwL2VlanMappingExtEntry 4 }
hwL2VlanMappingExtVlanListHigh OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The possible value of the inside vlan list."
::= { hwL2VlanMappingExtEntry 5 }
hwL2VlanMappingExtRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This table can be created."
::= { hwL2VlanMappingExtEntry 6 }
hwL2VlanMappingExtPriorityMode OBJECT-TYPE
SYNTAX INTEGER
{
priorityInherit (1),
remark8021p (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority mode of outside VLAN after mapping, the priority
can be appointed or inherit from inner VLAN's priority."
DEFVAL {priorityInherit }
::= { hwL2VlanMappingExtEntry 7 }
hwL2VlanMappingExtVlan8021p OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority of outside VLAN after mapping, its default value is 0."
DEFVAL {0}
::= { hwL2VlanMappingExtEntry 8 }
hwL2VlanStackingAdvTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanStackingAdvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of advanced vlan stacking."
::= { hwL2VlanApply 11 }
hwL2VlanStackingAdvEntry OBJECT-TYPE
SYNTAX HwL2VlanStackingAdvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of advanced vlan stacking table."
INDEX {hwL2VlanStackingAdvPortIndex,hwL2VlanStackingAdvOutside8021p,
hwL2VlanStackingAdvStackVlanId,hwL2VlanStackingAdvStack8021p,hwL2VlanStackingAdvMapVlanId}
::= { hwL2VlanStackingAdvTable 1 }
HwL2VlanStackingAdvEntry ::=
SEQUENCE {
hwL2VlanStackingAdvPortIndex
Integer32,
hwL2VlanStackingAdvOutside8021p
Integer32,
hwL2VlanStackingAdvStackVlanId
VlanId,
hwL2VlanStackingAdvStack8021p
Integer32,
hwL2VlanStackingAdvMapVlanId
VlanIdOrNone,
hwL2VlanStackingAdvOutsideVlanListLow
OCTET STRING,
hwL2VlanStackingAdvOutsideVlanListHigh
OCTET STRING,
hwL2VlanStackingAdvRowStatus
RowStatus
}
hwL2VlanStackingAdvPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Index of L2-Switch Interface."
::= { hwL2VlanStackingAdvEntry 1 }
hwL2VlanStackingAdvOutside8021p OBJECT-TYPE
SYNTAX Integer32(0..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 8021p value of vlan before stacked operation."
::= { hwL2VlanStackingAdvEntry 2 }
hwL2VlanStackingAdvStackVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The outer vlan-id after stacked operation."
::= { hwL2VlanStackingAdvEntry 3 }
hwL2VlanStackingAdvStack8021p OBJECT-TYPE
SYNTAX Integer32(0..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 8021p of outer vlan-id after stacked, it's an optional
field, if it is not selected, its value is 8."
::= { hwL2VlanStackingAdvEntry 4 }
hwL2VlanStackingAdvMapVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The possible value of the inner vlan after mapped operation."
::= { hwL2VlanStackingAdvEntry 5 }
hwL2VlanStackingAdvOutsideVlanListLow OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The possible value of the CE-Vlan low list."
::= { hwL2VlanStackingAdvEntry 6 }
hwL2VlanStackingAdvOutsideVlanListHigh OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The possible value of the CE-Vlan high list."
::= { hwL2VlanStackingAdvEntry 7 }
hwL2VlanStackingAdvRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This table can be created."
::= { hwL2VlanStackingAdvEntry 8 }
hwL2VlanMappingAdvTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanMappingAdvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of advanced vlan mapping."
::= { hwL2VlanApply 12 }
hwL2VlanMappingAdvEntry OBJECT-TYPE
SYNTAX HwL2VlanMappingAdvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of advanced vlan mapping table."
INDEX {hwL2VlanMappingAdvPortIndex,hwL2VlanMappingAdvOutsideVlan8021p,
hwL2VlanMappingAdvMapVlanId,hwL2VlanMappingAdvMapVlan8021p}
::= { hwL2VlanMappingAdvTable 1 }
HwL2VlanMappingAdvEntry ::=
SEQUENCE {
hwL2VlanMappingAdvPortIndex
Integer32,
hwL2VlanMappingAdvOutsideVlan8021p
Integer32,
hwL2VlanMappingAdvMapVlanId
VlanId,
hwL2VlanMappingAdvMapVlan8021p
Integer32,
hwL2VlanMappingAdvOutsideVlanListLow
OCTET STRING,
hwL2VlanMappingAdvOutsideVlanListHigh
OCTET STRING,
hwL2VlanMappingAdvRowStatus
RowStatus
}
hwL2VlanMappingAdvPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The index of L2-Switch port. "
::= { hwL2VlanMappingAdvEntry 1 }
hwL2VlanMappingAdvOutsideVlan8021p OBJECT-TYPE
SYNTAX Integer32(0..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The possible value of the CE-Vlan's 802.1p."
::= { hwL2VlanMappingAdvEntry 2 }
hwL2VlanMappingAdvMapVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mapped vlan-id, using it as the index."
::= { hwL2VlanMappingAdvEntry 3 }
hwL2VlanMappingAdvMapVlan8021p OBJECT-TYPE
SYNTAX Integer32(0..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 8021p of outer vlan-id after mapped, it's an optional
field, if it is not selected, its value is 8."
::= { hwL2VlanMappingAdvEntry 4 }
hwL2VlanMappingAdvOutsideVlanListLow OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The possible value of the CE-Vlan low list "
::= { hwL2VlanMappingAdvEntry 5 }
hwL2VlanMappingAdvOutsideVlanListHigh OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The possible value of the CE-Vlan high list."
::= { hwL2VlanMappingAdvEntry 6 }
hwL2VlanMappingAdvRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This table can be created."
::= { hwL2VlanMappingAdvEntry 7 }
hwL2VlanSwitchTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanSwitchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table to config the vlan switch."
::= { hwL2VlanApply 13 }
hwL2VlanSwitchEntry OBJECT-TYPE
SYNTAX HwL2VlanSwitchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the vlan switch table."
INDEX { hwL2VlanSwitchIfIndex, hwL2VlanSwitchOuterVlanId, hwL2VlanSwitchInnerVlanId }
::= { hwL2VlanSwitchTable 1 }
HwL2VlanSwitchEntry ::=
SEQUENCE {
hwL2VlanSwitchIfIndex
InterfaceIndex,
hwL2VlanSwitchOuterVlanId
VlanIdOrNone,
hwL2VlanSwitchInnerVlanId
VlanIdOrNone,
hwL2VlanSwitchMode
INTEGER,
hwL2VlanSwitchOuterSwitchVlanId
VlanIdOrNone,
hwL2VlanSwitchInnerSwitchVlanId
VlanIdOrNone,
hwL2VlanSwitch8021pRemark
Integer32,
hwL2VlanSwitchOutIfIndex
InterfaceIndex,
hwL2VlanSwitchMtu
Integer32,
hwL2VlanSwitchMtuDiscardPkts
Counter64,
hwL2VlanSwitchMtuDiscardBytes
Counter64,
hwL2VlanSwitchMtuResetFlag
EnabledStatus,
hwL2VlanSwitchMtuEnableFlag
EnabledStatus,
hwL2VlanSwitchRowStatus
RowStatus
}
hwL2VlanSwitchIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface index."
::= { hwL2VlanSwitchEntry 1 }
hwL2VlanSwitchOuterVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ID of the outer vlan tag(customer's tag)."
::= { hwL2VlanSwitchEntry 2 }
hwL2VlanSwitchInnerVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ID of the inner vlan tag."
::= { hwL2VlanSwitchEntry 3 }
hwL2VlanSwitchMode OBJECT-TYPE
SYNTAX INTEGER
{
zeroToOne(1),
zeroToTwo(2),
oneToZero(3),
oneToOne(4),
oneToTwo(5),
twoToZero(6),
twoToOne(7),
twoToTwo(8)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Mode of switch vlan operation, including the following case:
0 to 1, 0 to 2, 1 to 0, 1 to 1, 1 to 2, 2 to 0, 2 to 1, 2 to 2."
::= { hwL2VlanSwitchEntry 4 }
hwL2VlanSwitchOuterSwitchVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The outer vlan-id after switched."
::= { hwL2VlanSwitchEntry 5 }
hwL2VlanSwitchInnerSwitchVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The inner vlan-id after switched. 0 indicates it's not used."
::= { hwL2VlanSwitchEntry 6 }
hwL2VlanSwitch8021pRemark OBJECT-TYPE
SYNTAX Integer32(0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The 8021p of outer vlan-id after switched, it's an optional
field, if it is not selected, its value is 8."
::= { hwL2VlanSwitchEntry 7 }
hwL2VlanSwitchOutIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The out interface index."
::= { hwL2VlanSwitchEntry 8 }
hwL2VlanSwitchMtu OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of mtu."
::= { hwL2VlanSwitchEntry 9 }
hwL2VlanSwitchMtuDiscardPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of discard packets."
::= { hwL2VlanSwitchEntry 10 }
hwL2VlanSwitchMtuDiscardBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of discard bytes."
::= { hwL2VlanSwitchEntry 11 }
hwL2VlanSwitchMtuResetFlag OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The flag of reset the discard statistics."
::= { hwL2VlanSwitchEntry 12 }
hwL2VlanSwitchMtuEnableFlag OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The flag of enable the discard statistics."
::= { hwL2VlanSwitchEntry 13 }
hwL2VlanSwitchRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used for controlling the creation and deletion of this
row. All writable objects in this row may be modified at any time.
If a Network Management Application attempts to delete a conceptual
row by setting this object to 'destroy' and there are one or more entries
in hwL2VlanSwitchTable pointing to the row, the agent MUST also
destroy the corresponding entries in hwL2VlanSwitchTable."
::= { hwL2VlanSwitchEntry 14 }
hwL2VlanQinqVlanTransEnaTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanQinqVlanTransEnaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of QinQ VLAN translation enable."
::= { hwL2VlanApply 14 }
hwL2VlanQinqVlanTransEnaEntry OBJECT-TYPE
SYNTAX HwL2VlanQinqVlanTransEnaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of QinQ VLAN translation enable."
INDEX {hwL2VlanQinqVlanTransEnaPortIndex}
::= { hwL2VlanQinqVlanTransEnaTable 1 }
HwL2VlanQinqVlanTransEnaEntry ::=
SEQUENCE {
hwL2VlanQinqVlanTransEnaPortIndex
Integer32,
hwL2VlanQinqVlanTransEna
EnabledStatus,
hwL2VlanQinqVlanTransEnaRowStatus
RowStatus
}
hwL2VlanQinqVlanTransEnaPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The index of L2-Switch port. "
::= { hwL2VlanQinqVlanTransEnaEntry 1 }
hwL2VlanQinqVlanTransEna OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable QinQ VLAN translation."
DEFVAL {2}
::= { hwL2VlanQinqVlanTransEnaEntry 2 }
hwL2VlanQinqVlanTransEnaRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This table can be created."
::= { hwL2VlanQinqVlanTransEnaEntry 3 }
hwL2VlanQinqVlanTransMissDropTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanQinqVlanTransMissDropEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of QinQ VLAN translation miss drop."
::= { hwL2VlanApply 15 }
hwL2VlanQinqVlanTransMissDropEntry OBJECT-TYPE
SYNTAX HwL2VlanQinqVlanTransMissDropEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of QinQ VLAN translation miss drop."
INDEX {hwL2VlanQinqVlanTransMissDropPortIndex}
::= { hwL2VlanQinqVlanTransMissDropTable 1 }
HwL2VlanQinqVlanTransMissDropEntry ::=
SEQUENCE {
hwL2VlanQinqVlanTransMissDropPortIndex
Integer32,
hwL2VlanQinqVlanTransMissDrop
INTEGER,
hwL2VlanQinqVlanTransMissDropRowStatus
RowStatus
}
hwL2VlanQinqVlanTransMissDropPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The index of L2-Switch port. "
::= { hwL2VlanQinqVlanTransMissDropEntry 1 }
hwL2VlanQinqVlanTransMissDrop OBJECT-TYPE
SYNTAX INTEGER
{
noDrop(1),
drop(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Packets are dropped when a VLAN translation miss occurs."
DEFVAL {noDrop}
::= { hwL2VlanQinqVlanTransMissDropEntry 2 }
hwL2VlanQinqVlanTransMissDropRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This table can be created."
::= { hwL2VlanQinqVlanTransMissDropEntry 3 }
hwL2VlanViewMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanViewMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of vlan-mapping at the VLAN view."
::= { hwL2VlanApply 16 }
hwL2VlanViewMappingEntry OBJECT-TYPE
SYNTAX HwL2VlanViewMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains vlan-mapping at the VLAN view entry."
INDEX { hwL2VlanViewMappingVlanId,hwL2VlanViewMappingDirection }
::= { hwL2VlanViewMappingTable 1}
HwL2VlanViewMappingEntry ::=
SEQUENCE {
hwL2VlanViewMappingVlanId VlanId,
hwL2VlanViewMappingDirection INTEGER,
hwL2VlanViewMappingMapVlanId VlanId,
hwL2VlanViewMappingPriorityMode INTEGER,
hwL2VlanViewMappingVlan8021p Integer32,
hwL2VlanViewMappingRowStatus RowStatus
}
hwL2VlanViewMappingVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN ID before mapping, using it as the index."
::= { hwL2VlanViewMappingEntry 1 }
hwL2VlanViewMappingDirection OBJECT-TYPE
SYNTAX INTEGER
{
inbound (1),
outbound (2),
both (3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Direction inbound and outbound."
::= { hwL2VlanViewMappingEntry 2 }
hwL2VlanViewMappingMapVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VLAN ID after mapping."
::= { hwL2VlanViewMappingEntry 3 }
hwL2VlanViewMappingPriorityMode OBJECT-TYPE
SYNTAX INTEGER
{
priorityInherit (1),
remark8021p (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority mode: the priority can be remarked or inherit:
1: priority inherit
2: remark 8021p "
DEFVAL {priorityInherit}
::= { hwL2VlanViewMappingEntry 4 }
hwL2VlanViewMappingVlan8021p OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority after mapping, its default value is 0."
DEFVAL {0}
::= { hwL2VlanViewMappingEntry 5 }
hwL2VlanViewMappingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Operation status."
::= { hwL2VlanViewMappingEntry 6 }
hwL2VlanStackingMaskTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanStackingMaskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VLAN-stacking with Mask."
::= { hwL2VlanApply 17 }
hwL2VlanStackingMaskEntry OBJECT-TYPE
SYNTAX HwL2VlanStackingMaskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the table of VLAN-stacking with Mask. "
INDEX {
hwL2VlanStackingMaskPortIndex,
hwL2VlanStackingMaskStackVlanId,
hwL2VlanStackingMaskStack8021p,
hwL2VlanStackingMaskAction,
hwL2VlanStackingMaskDirection
}
::= { hwL2VlanStackingMaskTable 1}
HwL2VlanStackingMaskEntry ::=
SEQUENCE {
hwL2VlanStackingMaskPortIndex InterfaceIndex,
hwL2VlanStackingMaskStackVlanId VlanIdOrNone,
hwL2VlanStackingMaskStack8021p Integer32,
hwL2VlanStackingMaskAction INTEGER,
hwL2VlanStackingMaskDirection INTEGER,
hwL2VlanStackingMaskVlanListLow OCTET STRING,
hwL2VlanStackingMaskVlanListHigh OCTET STRING,
hwL2VlanStackingMaskRowStatus RowStatus
}
hwL2VlanStackingMaskPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of L2-Switch interface."
::= { hwL2VlanStackingMaskEntry 1 }
hwL2VlanStackingMaskStackVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The outer VLAN-ID after stacking operation."
::= { hwL2VlanStackingMaskEntry 2 }
hwL2VlanStackingMaskStack8021p OBJECT-TYPE
SYNTAX Integer32(0..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 8021p of outer VLAN-ID after stacking, it's an optional field,
if it is not selected, its value is 8, means inherit the 8021p from inner tag."
::= { hwL2VlanStackingMaskEntry 3 }
hwL2VlanStackingMaskAction OBJECT-TYPE
SYNTAX INTEGER
{
pop (1),
push (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The packet will be poped or pushed."
::= { hwL2VlanStackingMaskEntry 4}
hwL2VlanStackingMaskDirection OBJECT-TYPE
SYNTAX INTEGER
{
inside (1),
outside (2),
both (3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The direction which the packet need be poped or pushed,
that is ,the packet is receviced or transitted"
::= { hwL2VlanStackingMaskEntry 5}
hwL2VlanStackingMaskVlanListLow OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The possible value of the CE-VLAN low list."
::= { hwL2VlanStackingMaskEntry 6 }
hwL2VlanStackingMaskVlanListHigh OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The possible value of the CE-VLAN high list."
::= { hwL2VlanStackingMaskEntry 7 }
hwL2VlanStackingMaskRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Operation status."
::= { hwL2VlanStackingMaskEntry 8 }
hwL2VlanIpSubnetVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanIpSubnetVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VLAN assignment based on ip subnet."
::= { hwL2VlanApply 18 }
hwL2VlanIpSubnetVlanEntry OBJECT-TYPE
SYNTAX HwL2VlanIpSubnetVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the table of VLAN assignment based on ip subnet. "
INDEX {
hwL2VlanIpSubnetVlanVlanId,
hwL2VlanIpSubnetVlanIpSubnetIndex
}
::= { hwL2VlanIpSubnetVlanTable 1 }
HwL2VlanIpSubnetVlanEntry ::=
SEQUENCE {
hwL2VlanIpSubnetVlanVlanId VlanId,
hwL2VlanIpSubnetVlanIpSubnetIndex Integer32,
hwL2VlanIpSubnetVlanIpAddress IpAddress,
hwL2VlanIpSubnetVlanIpSubnetMask IpAddress,
hwL2VlanIpSubnetVlanPriority Integer32,
hwL2VlanIpSubnetVlanRowStatus RowStatus
}
hwL2VlanIpSubnetVlanVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN-ID after VLAN assignment based on ip subnet."
::= { hwL2VlanIpSubnetVlanEntry 1 }
hwL2VlanIpSubnetVlanIpSubnetIndex OBJECT-TYPE
SYNTAX Integer32(1..12)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of ip subnet on this vlan, ranging from integer 1 to 12."
::= { hwL2VlanIpSubnetVlanEntry 2 }
hwL2VlanIpSubnetVlanIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IpAddress based on vlan."
::= { hwL2VlanIpSubnetVlanEntry 3}
hwL2VlanIpSubnetVlanIpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IpAddress or Ip subnet mask."
::= { hwL2VlanIpSubnetVlanEntry 4}
hwL2VlanIpSubnetVlanPriority OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority after vlan assignment based on ip subnet, its default value is 0."
DEFVAL {0}
::= { hwL2VlanIpSubnetVlanEntry 5 }
hwL2VlanIpSubnetVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Operation status."
::= { hwL2VlanIpSubnetVlanEntry 6 }
hwL2VlanMacVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanMacVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VLAN assignment based on MAC."
::= { hwL2VlanApply 19 }
hwL2VlanMacVlanEntry OBJECT-TYPE
SYNTAX HwL2VlanMacVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the table of VLAN assignment based on MAC. "
INDEX {
hwL2VlanMacVlanVlanId
}
::= { hwL2VlanMacVlanTable 1 }
HwL2VlanMacVlanEntry ::=
SEQUENCE {
hwL2VlanMacVlanVlanId VlanId,
hwL2VlanMacVlanMac MacAddress,
hwL2VlanMacVlanVlanPriority Integer32,
hwL2VlanMacVlanMacRowStatus RowStatus
}
hwL2VlanMacVlanVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"mac-vlan."
::= { hwL2VlanMacVlanEntry 1}
hwL2VlanMacVlanMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VLAN-ID after VLAN assignment based on mac."
::= { hwL2VlanMacVlanEntry 2}
hwL2VlanMacVlanVlanPriority OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority after vlan assignment based on mac, its default value is 0."
DEFVAL {0}
::= { hwL2VlanMacVlanEntry 3 }
hwL2VlanMacVlanMacRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Operation status."
::= { hwL2VlanMacVlanEntry 4 }
hwL2VlanProtocolVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanProtocolVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VLAN assignment based on protocol."
::= { hwL2VlanApply 20 }
hwL2VlanProtocolVlanEntry OBJECT-TYPE
SYNTAX HwL2VlanProtocolVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the table of VLAN assignment based on protocol. "
INDEX {
hwL2VlanProtocolVlanVlanId,
hwL2VlanProtocolVlanProtocolIndex
}
::= { hwL2VlanProtocolVlanTable 1 }
HwL2VlanProtocolVlanEntry ::=
SEQUENCE {
hwL2VlanProtocolVlanVlanId VlanId,
hwL2VlanProtocolVlanProtocolIndex Integer32,
hwL2VlanProtocolVlanProtocolType Integer32,
hwL2VlanProtocolVlanEncapType INTEGER,
hwL2VlanProtocolVlanRowStatus RowStatus
}
hwL2VlanProtocolVlanVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN-ID after VLAN assignment based on protocol."
::= { hwL2VlanProtocolVlanEntry 1 }
hwL2VlanProtocolVlanProtocolIndex OBJECT-TYPE
SYNTAX Integer32(1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of protocol on vlan, ranging from integer 1 to 16"
::= { hwL2VlanProtocolVlanEntry 2 }
hwL2VlanProtocolVlanProtocolType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Protocol type."
::= { hwL2VlanProtocolVlanEntry 3}
hwL2VlanProtocolVlanEncapType OBJECT-TYPE
SYNTAX INTEGER
{
etherii(1),
snap(2),
llc(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Encap type, include ETHERII,SNAP,LLC."
::= { hwL2VlanProtocolVlanEntry 4 }
hwL2VlanProtocolVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Operation status."
::= { hwL2VlanProtocolVlanEntry 5 }
hwL2VlanPolicyVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanPolicyVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VLAN assignment based on strategy."
::= { hwL2VlanApply 21 }
hwL2VlanPolicyVlanEntry OBJECT-TYPE
SYNTAX HwL2VlanPolicyVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the table of VLAN assignment based on strategy. "
INDEX {
hwL2VlanPolicyVlanVlanId
}
::= { hwL2VlanPolicyVlanTable 1 }
HwL2VlanPolicyVlanEntry ::=
SEQUENCE {
hwL2VlanPolicyVlanMac MacAddress,
hwL2VlanPolicyVlanIp IpAddress,
hwL2VlanPolicyVlanPort Integer32,
hwL2VlanPolicyVlanVlanId VlanId,
hwL2VlanPolicyVlanVlanPriority Integer32,
hwL2VlanPolicyVlanRowStatus RowStatus
}
hwL2VlanPolicyVlanMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Support MAC+IP and MAC+IP+PORT."
::= { hwL2VlanPolicyVlanEntry 1}
hwL2VlanPolicyVlanIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Support MAC+IP and MAC+IP+PORT."
::= { hwL2VlanPolicyVlanEntry 2}
hwL2VlanPolicyVlanPort OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Support MAC+IP+PORT."
DEFVAL {0}
::= { hwL2VlanPolicyVlanEntry 3 }
hwL2VlanPolicyVlanVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VLAN-ID after VLAN assignment based on policy."
::= { hwL2VlanPolicyVlanEntry 4 }
hwL2VlanPolicyVlanVlanPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VLAN-ID after VLAN assignment based on policy."
::= { hwL2VlanPolicyVlanEntry 5 }
hwL2VlanPolicyVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Operation status."
::= { hwL2VlanPolicyVlanEntry 6 }
hwL2VlanVoiceVlanEnabledVlanId OBJECT-TYPE
SYNTAX Integer32(0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the global voice VLAN ID. Global voice VLAN is enabled if the value ranges from 1 to 4094; global voice VLAN is disabled if the value is 0."
::= { hwL2VlanApply 22 }
hwL2VlanVoiceVlanAgingTime OBJECT-TYPE
SYNTAX Integer32(5..43200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Voice vlan aging time(in minute). The default value is 1440."
::= { hwL2VlanApply 23 }
hwL2VlanVoiceVlanSecurityMode OBJECT-TYPE
SYNTAX INTEGER
{
security (1),
normal (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Voice vlan security mode status."
::= { hwL2VlanApply 24 }
hwL2VlanVoiceVlanPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanVoiceVlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " A list of voice vlan mode entries."
::= { hwL2VlanApply 25 }
hwL2VlanVoiceVlanPortEntry OBJECT-TYPE
SYNTAX HwL2VlanVoiceVlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " An entry containing voice vlan mode information,
which is applicable to a voice vlan enabled interface."
INDEX { hwL2VlanVoiceVlanPortIndex }
::= { hwL2VlanVoiceVlanPortTable 1}
HwL2VlanVoiceVlanPortEntry ::=
SEQUENCE {
hwL2VlanVoiceVlanPortIndex Integer32,
hwL2VlanVoiceVlanPortEnable EnabledStatus,
hwL2VlanVoiceVlanPortMode INTEGER,
hwL2VlanVoiceVlanPortLegacy EnabledStatus,
hwL2VlanVoiceVlanPortSecurityMode INTEGER
}
hwL2VlanVoiceVlanPortIndex OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port index on which voice vlan is enabled."
::= { hwL2VlanVoiceVlanPortEntry 1 }
hwL2VlanVoiceVlanPortEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Voice VLAN enable status at port ."
::= { hwL2VlanVoiceVlanPortEntry 2 }
hwL2VlanVoiceVlanPortMode OBJECT-TYPE
SYNTAX INTEGER
{
auto (1),
manual (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Voice VLAN configuration mode status, 1 for auto, 2 for manual."
::= { hwL2VlanVoiceVlanPortEntry 3 }
hwL2VlanVoiceVlanPortLegacy OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This flag is enabled. It indicates that the interworking with other vendors' equipment is enabled."
::= { hwL2VlanVoiceVlanPortEntry 4}
hwL2VlanVoiceVlanPortSecurityMode OBJECT-TYPE
SYNTAX INTEGER
{
security (1),
normal (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Voice VLAN configuration security mode status, 1 for security, 2 for normal."
::= { hwL2VlanVoiceVlanPortEntry 5}
hwL2VlanVoiceVlanOuiTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanVoiceVlanOuiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " A table containing the MAC address which can be identified by voice vlan. "
::= { hwL2VlanApply 26 }
hwL2VlanVoiceVlanOuiEntry OBJECT-TYPE
SYNTAX HwL2VlanVoiceVlanOuiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " An entry containing the information of MAC address which can be identified by voice vlan."
INDEX { hwL2VlanVoiceVlanOuiAddress, hwL2VlanVoiceVlanOuiMask }
::= { hwL2VlanVoiceVlanOuiTable 1}
HwL2VlanVoiceVlanOuiEntry ::=
SEQUENCE {
hwL2VlanVoiceVlanOuiAddress MacAddress ,
hwL2VlanVoiceVlanOuiMask MacAddress ,
hwL2VlanVoiceVlanOuiDescription OCTET STRING ,
hwL2VlanVoiceVlanOuiRowStatus RowStatus
}
hwL2VlanVoiceVlanOuiAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "MAC address can be identified by Voice VLAN."
::= { hwL2VlanVoiceVlanOuiEntry 1 }
hwL2VlanVoiceVlanOuiMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The mask of MAC address."
::= { hwL2VlanVoiceVlanOuiEntry 2 }
hwL2VlanVoiceVlanOuiDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..80))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The description of OUI."
::= { hwL2VlanVoiceVlanOuiEntry 3 }
hwL2VlanVoiceVlanOuiRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Operation status. "
::= { hwL2VlanVoiceVlanOuiEntry 4 }
hwL2VlanMappingMultiTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanMappingMultiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration table."
::= { hwL2VlanApply 27 }
hwL2VlanMappingMultiEntry OBJECT-TYPE
SYNTAX HwL2VlanMappingMultiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains Vlan-Mapping entry."
INDEX {hwL2VlanMappingMultiPortIndex,hwL2VlanMappingMultiDirection,
hwL2VlanMappingMultiVlanId,hwL2VlanMappingMultiVlan8021p}
::= { hwL2VlanMappingMultiTable 1}
HwL2VlanMappingMultiEntry ::=
SEQUENCE {
hwL2VlanMappingMultiPortIndex Integer32,
hwL2VlanMappingMultiDirection INTEGER,
hwL2VlanMappingMultiVlanId VlanId,
hwL2VlanMappingMultiVlan8021p Integer32,
hwL2VlanMappingMultiVlanListLow OCTET STRING,
hwL2VlanMappingMultiVlanListHigh OCTET STRING,
hwL2VlanMappingMultiRowStatus RowStatus
}
hwL2VlanMappingMultiPortIndex OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Index."
::= { hwL2VlanMappingMultiEntry 1 }
hwL2VlanMappingMultiDirection OBJECT-TYPE
SYNTAX INTEGER
{
inbound (1),
outbound (2),
both (3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Direction inbound and outbound."
::= { hwL2VlanMappingMultiEntry 2 }
hwL2VlanMappingMultiVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The outside vlan-id."
::= { hwL2VlanMappingMultiEntry 3 }
hwL2VlanMappingMultiVlan8021p OBJECT-TYPE
SYNTAX Integer32(0..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The priority of outside VLAN after mapping,8 means priority-inherit."
::= { hwL2VlanMappingMultiEntry 4 }
hwL2VlanMappingMultiVlanListLow OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The possible value of the inside vlan list."
::= { hwL2VlanMappingMultiEntry 5 }
hwL2VlanMappingMultiVlanListHigh OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The possible value of the inside vlan list."
::= { hwL2VlanMappingMultiEntry 6 }
hwL2VlanMappingMultiRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This table can be created."
::= { hwL2VlanMappingMultiEntry 7 }
hwL2VlanMacVlanNewTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanMacVlanNewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VLAN assignment based on MAC."
::= { hwL2VlanApply 28 }
hwL2VlanMacVlanNewEntry OBJECT-TYPE
SYNTAX HwL2VlanMacVlanNewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the table of VLAN assignment based on MAC. "
INDEX {
hwL2VlanMacVlanNewMac
}
::= { hwL2VlanMacVlanNewTable 1 }
HwL2VlanMacVlanNewEntry ::=
SEQUENCE {
hwL2VlanMacVlanNewMac MacAddress,
hwL2VlanMacVlanNewVlanId VlanId,
hwL2VlanMacVlanNewVlanPriority Integer32,
hwL2VlanMacVlanNewMacRowStatus RowStatus
}
hwL2VlanMacVlanNewMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN-ID after VLAN assignment based on MAC."
::= { hwL2VlanMacVlanNewEntry 1}
hwL2VlanMacVlanNewVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"MAC-VLAN VLAN ID."
::= { hwL2VlanMacVlanNewEntry 2}
hwL2VlanMacVlanNewVlanPriority OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority after VLAN assignment based on MAC, its default value is 0."
DEFVAL {0}
::= { hwL2VlanMacVlanNewEntry 3 }
hwL2VlanMacVlanNewMacRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Operation status."
::= { hwL2VlanMacVlanNewEntry 4 }
hwL2VlanProtocolVlanNewTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanProtocolVlanNewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VLAN assignment based on protocol."
::= { hwL2VlanApply 29 }
hwL2VlanProtocolVlanNewEntry OBJECT-TYPE
SYNTAX HwL2VlanProtocolVlanNewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the table of VLAN assignment based on protocol. "
INDEX {
hwL2VlanProtocolVlanNewVlanId,
hwL2VlanProtocolVlanNewProtocolIndex
}
::= { hwL2VlanProtocolVlanNewTable 1 }
HwL2VlanProtocolVlanNewEntry ::=
SEQUENCE {
hwL2VlanProtocolVlanNewVlanId VlanId,
hwL2VlanProtocolVlanNewProtocolIndex Integer32,
hwL2VlanProtocolVlanNewProtocolType INTEGER,
hwL2VlanProtocolVlanNewProtocolTypeValue OCTET STRING,
hwL2VlanProtocolVlanNewRowStatus RowStatus
}
hwL2VlanProtocolVlanNewVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN-ID after VLAN assignment based on protocol."
::= { hwL2VlanProtocolVlanNewEntry 1 }
hwL2VlanProtocolVlanNewProtocolIndex OBJECT-TYPE
SYNTAX Integer32(0..15)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of protocol on vlan, ranging from integer 1 to 16"
::= { hwL2VlanProtocolVlanNewEntry 2 }
hwL2VlanProtocolVlanNewProtocolType OBJECT-TYPE
SYNTAX INTEGER
{
at(1),
ipv4(2),
ipv6(3),
ipxEthernetii (4),
ipxLlc(5),
ipxRaw(6),
ipxSnap(7),
modeEthernetii(8),
modeLlc(9),
modeSnap (10)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Protocol type."
::= { hwL2VlanProtocolVlanNewEntry 3}
hwL2VlanProtocolVlanNewProtocolTypeValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the configured protocol type.
The relationship among hwL2VlanProtocolVlanNewProtocolType and hwL2VlanProtocolVlanNewProtocolTypeValue is as follows.
|--------------------------------------------------------------------------------------------|
| hwL2VlanProtocol-| | hwL2VlanProtocolVlanNewProtocolTypeValue |
| VlanProtocolType | ProtocolSubType | |
|------------------|------------------|------------------------------------------------------|
| ipv4 | notused | Zero length string |
|------------------|------------------|------------------------------------------------------|
| ipv6 | notused | Zero length string |
|------------------|------------------|------------------------------------------------------|
| at | notused | Zero length string |
|------------------|------------------|------------------------------------------------------|
| ipx | ethernetii | Zero length string |
| | llc | |
| | raw | |
| | snap | |
|------------------|------------------|------------------------------------------------------|
| mode-ethernetii | etype | hex string like '600', which means 0x0600. |
| | | The range is [0x600..0xffff] |
|------------------|------------------|------------------------------------------------------|
| mode-llc | etype | the sequence of different parts is as follows. |
| | | [dsap value;ssap value] |
| | | Both range is [0x00..0xff] |
| | | |
| | | For example. Suppose value of dsap and ssap are 0x09 |
| | | and 0x0a, the value is '090a' |
|------------------|------------------|------------------------------------------------------|
| mode-snap | etype | hex string like '600', which means 0x0600. |
| | | The range is [0x600..0xffff] |
|------------------|------------------|------------------------------------------------------|
"
::= { hwL2VlanProtocolVlanNewEntry 4 }
hwL2VlanProtocolVlanNewRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Operation status."
::= { hwL2VlanProtocolVlanNewEntry 5 }
hwL2VlanPolicyVlanNewTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanPolicyVlanNewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VLAN assignment based on strategy."
::= { hwL2VlanApply 30 }
hwL2VlanPolicyVlanNewEntry OBJECT-TYPE
SYNTAX HwL2VlanPolicyVlanNewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the table of VLAN assignment based on strategy. "
INDEX {
hwL2VlanPolicyVlanNewVlanId,
hwL2VlanPolicyVlanNewMac,
hwL2VlanPolicyVlanNewIp,
hwL2VlanPolicyVlanNewPort
}
::= { hwL2VlanPolicyVlanNewTable 1 }
HwL2VlanPolicyVlanNewEntry ::=
SEQUENCE {
hwL2VlanPolicyVlanNewMac MacAddress,
hwL2VlanPolicyVlanNewIp IpAddress,
hwL2VlanPolicyVlanNewPort Integer32,
hwL2VlanPolicyVlanNewVlanId VlanId,
hwL2VlanPolicyVlanNewVlanPriority Integer32,
hwL2VlanPolicyVlanNewRowStatus RowStatus
}
hwL2VlanPolicyVlanNewMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Support MAC+IP and MAC+IP+PORT."
::= { hwL2VlanPolicyVlanNewEntry 1}
hwL2VlanPolicyVlanNewIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Support MAC+IP and MAC+IP+PORT."
::= { hwL2VlanPolicyVlanNewEntry 2}
hwL2VlanPolicyVlanNewPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Support MAC+IP+PORT."
::= { hwL2VlanPolicyVlanNewEntry 3 }
hwL2VlanPolicyVlanNewVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN-ID after VLAN assignment based on policy."
::= { hwL2VlanPolicyVlanNewEntry 4 }
hwL2VlanPolicyVlanNewVlanPriority OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Priority after VLAN assignment based on policy."
::= { hwL2VlanPolicyVlanNewEntry 5 }
hwL2VlanPolicyVlanNewRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Operation status."
::= { hwL2VlanPolicyVlanNewEntry 6 }
hwL2VlanProtocolVlanPortNewTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanProtocolVlanPortNewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Protocol-based VLAN port information table.
hwL2VlanProtocolVlanPortNewVlanId refers to hwL2VlanProtocolVlanNewVlanId
in hwL2VlanProtocolVlanNewTable.
hwL2VlanProtocolVlanPortNewProtocolId refers to hwL2VlanProtocolVlanNewProtocolIndex
in hwL2VlanProtocolVlanNewTable. So if the value of hwL2VlanProtocolVlanPortNewVlanId
and hwL2VlanProtocolVlanPortNewProtocolId have no corresponding entry in
hwL2VlanProtocolVlanNewTable, set operation for this table will fail.
"
::= { hwL2VlanApply 31 }
hwL2VlanProtocolVlanPortNewEntry OBJECT-TYPE
SYNTAX HwL2VlanProtocolVlanPortNewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Protocol-based VLAN port information entry.
"
INDEX { hwL2VlanProtocolVlanPortNewIndex, hwL2VlanProtocolVlanPortNewVlanId,
hwL2VlanProtocolVlanPortNewProtocolIndex }
::= { hwL2VlanProtocolVlanPortNewTable 1 }
HwL2VlanProtocolVlanPortNewEntry ::=
SEQUENCE {
hwL2VlanProtocolVlanPortNewIndex
Integer32,
hwL2VlanProtocolVlanPortNewVlanId
VlanId,
hwL2VlanProtocolVlanPortNewProtocolIndex
Integer32,
hwL2VlanProtocolVlanPortNewPriority
Integer32,
hwL2VlanProtocolVlanPortNewRowStatus
RowStatus
}
hwL2VlanProtocolVlanPortNewIndex OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The maximum number is the total number of the ports supported by device.
"
::= { hwL2VlanProtocolVlanPortNewEntry 1 }
hwL2VlanProtocolVlanPortNewVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The protocol-based VLAN ID."
::= { hwL2VlanProtocolVlanPortNewEntry 2 }
hwL2VlanProtocolVlanPortNewProtocolIndex OBJECT-TYPE
SYNTAX Integer32(0..15)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The protocol index."
::= { hwL2VlanProtocolVlanPortNewEntry 3 }
hwL2VlanProtocolVlanPortNewPriority OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The protocol-based VLAN priority."
::= { hwL2VlanProtocolVlanPortNewEntry 4 }
hwL2VlanProtocolVlanPortNewRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status of this table."
::= { hwL2VlanProtocolVlanPortNewEntry 5}
hwL2VlanMultiVoiceVlanPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanMultiVoiceVlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Voice VLAN is enabled on the port."
::= { hwL2VlanApply 32 }
hwL2VlanMultiVoiceVlanPortEntry OBJECT-TYPE
SYNTAX HwL2VlanMultiVoiceVlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " An entry containing voice VLAN mode information,
which is applicable to a voice VLAN enabled interface."
INDEX { hwL2VlanMultiVoiceVlanIfIndex }
::= { hwL2VlanMultiVoiceVlanPortTable 1}
HwL2VlanMultiVoiceVlanPortEntry ::=
SEQUENCE {
hwL2VlanMultiVoiceVlanIfIndex InterfaceIndex,
hwL2VlanMultiVoiceVlanPortVLanId VlanId,
hwL2VlanMultiVoiceVlanPortRowStatus RowStatus
}
hwL2VlanMultiVoiceVlanIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The interface index on which voice VLAN is enabled."
::= { hwL2VlanMultiVoiceVlanPortEntry 1 }
hwL2VlanMultiVoiceVlanPortVLanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The VLAN ID of voice VLAN on port ."
::= { hwL2VlanMultiVoiceVlanPortEntry 2 }
hwL2VlanMultiVoiceVlanPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The row status of this table."
::= { hwL2VlanMultiVoiceVlanPortEntry 51 }
hwL2VlanSwitchExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanSwitchExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table to config the vlan switch."
::= { hwL2VlanApply 33 }
hwL2VlanSwitchExtEntry OBJECT-TYPE
SYNTAX HwL2VlanSwitchExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the vlan switch table."
INDEX { hwL2VlanSwitchExtName }
::= { hwL2VlanSwitchExtTable 1 }
HwL2VlanSwitchExtEntry ::=
SEQUENCE {
hwL2VlanSwitchExtName
OCTET STRING,
hwL2VlanSwitchExtSrcIfIndex
InterfaceIndex,
hwL2VlanSwitchExtOuterVlanId
Integer32,
hwL2VlanSwitchExtVlanListLow
OCTET STRING,
hwL2VlanSwitchExtVlanListHigh
OCTET STRING,
hwL2VlanSwitchExtDstIfIndex
InterfaceIndex,
hwL2VlanSwitchExtVlanXlateAction
INTEGER,
hwL2VlanSwitchExtDstVlan
Integer32,
hwL2VlanSwitchExtDstInnerVlan
Integer32,
hwL2VlanSwitchExtRemark
Integer32,
hwL2VlanSwitchExtRemarkReverse
Integer32,
hwL2VlanSwitchExtLinkStatus
INTEGER,
hwL2VlanSwitchExtRowStatus
RowStatus
}
hwL2VlanSwitchExtName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vlan switch name."
::= { hwL2VlanSwitchExtEntry 1 }
hwL2VlanSwitchExtSrcIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of source interface."
::= { hwL2VlanSwitchExtEntry 2 }
hwL2VlanSwitchExtOuterVlanId OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The outer vlan."
::= { hwL2VlanSwitchExtEntry 3 }
hwL2VlanSwitchExtVlanListLow OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The possible value of the inside vlan list."
::= { hwL2VlanSwitchExtEntry 4 }
hwL2VlanSwitchExtVlanListHigh OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The possible value of the inside vlan list."
::= { hwL2VlanSwitchExtEntry 5 }
hwL2VlanSwitchExtDstIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of destination interface."
::= { hwL2VlanSwitchExtEntry 6 }
hwL2VlanSwitchExtVlanXlateAction OBJECT-TYPE
SYNTAX INTEGER
{
unchange(1),
switch(2),
push(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The action type of vlan:
1 : unchange vlan,
2 : switch vlan,
3 : push vlan."
::= { hwL2VlanSwitchExtEntry 7 }
hwL2VlanSwitchExtDstVlan OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The outer vlan of destination."
::= { hwL2VlanSwitchExtEntry 8 }
hwL2VlanSwitchExtDstInnerVlan OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The inner vlan of destination."
::= { hwL2VlanSwitchExtEntry 9 }
hwL2VlanSwitchExtRemark OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The remark 8021p value."
::= { hwL2VlanSwitchExtEntry 10 }
hwL2VlanSwitchExtRemarkReverse OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The reverse remark 8021p value."
::= { hwL2VlanSwitchExtEntry 11 }
hwL2VlanSwitchExtLinkStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The link status of vlan switch."
::= { hwL2VlanSwitchExtEntry 12 }
hwL2VlanSwitchExtRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status."
::= { hwL2VlanSwitchExtEntry 51 }
hwL2VlanPrecedence OBJECT-TYPE
SYNTAX INTEGER
{
macvlan (1),
ipsubnetvlan (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Determine whether to select the MAC-based VLAN or subnet-based VLAN,
1:MAC VLAN(default); 2:IPSUBNET VLAN."
::= { hwL2VlanApply 34 }
hwL2VlanXlateTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanXlateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "VLAN mapping configuration table."
::= { hwL2VlanApply 35 }
hwL2VlanXlateEntry OBJECT-TYPE
SYNTAX HwL2VlanXlateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry in the VLAN mapping configuration table."
INDEX {
hwL2VlanXlateInterfaceIndex,
hwL2VlanXlateVlanIdBegin,
hwL2VlanXlateOuterVlanId,
hwL2VlanXlateVlan8021p,
hwL2VlanXlateDirection
}
::= { hwL2VlanXlateTable 1}
HwL2VlanXlateEntry ::=
SEQUENCE {
hwL2VlanXlateInterfaceIndex InterfaceIndex,
hwL2VlanXlateVlanIdBegin VlanId,
hwL2VlanXlateVlanIdEnd VlanIdOrNone,
hwL2VlanXlateOuterVlanId VlanIdOrNone,
hwL2VlanXlateVlan8021p Integer32,
hwL2VlanXlateDirection INTEGER,
hwL2VlanXlateAction INTEGER,
hwL2VlanXlateToVlanId VlanIdOrNone,
hwL2VlanXlateToinnerVlanId VlanIdOrNone,
hwL2VlanXlateremark Integer32,
hwL2VlanXlateRowStatus RowStatus
}
hwL2VlanXlateInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of the interface."
::= { hwL2VlanXlateEntry 1 }
hwL2VlanXlateVlanIdBegin OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " The ID of the first VLAN (VLAN ID in the inner VLAN tag if there are double VLAN tags)
at the user side."
::= { hwL2VlanXlateEntry 2 }
hwL2VlanXlateVlanIdEnd OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The ID of the end VLAN (VLAN ID in the inner VLAN tag if there are double VLAN tags)
at the user side."
::= { hwL2VlanXlateEntry 3 }
hwL2VlanXlateOuterVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The value of outer VLAN for packets with double tags in customer side.
For one-tag-packet, it's 0."
::= { hwL2VlanXlateEntry 4 }
hwL2VlanXlateVlan8021p OBJECT-TYPE
SYNTAX Integer32(0..8 | 65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The priority of the packet in customer side."
::= { hwL2VlanXlateEntry 5 }
hwL2VlanXlateDirection OBJECT-TYPE
SYNTAX INTEGER
{
inbound (1),
outbound (2),
both (3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Direction inbound or outbound or both."
::= { hwL2VlanXlateEntry 6 }
hwL2VlanXlateAction OBJECT-TYPE
SYNTAX INTEGER
{
map (1),
stack (2),
pop (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The packet will be mapped or stacked or poped."
::= { hwL2VlanXlateEntry 7 }
hwL2VlanXlateToVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The ID of the outer VLAN at the network side.
If this VLAN is not in use, the ID is 0."
::= { hwL2VlanXlateEntry 8 }
hwL2VlanXlateToinnerVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of inner VLAN in network side. It's 0 when it is not used."
::= { hwL2VlanXlateEntry 9 }
hwL2VlanXlateremark OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The priority of outer VLAN in network side."
::= { hwL2VlanXlateEntry 10 }
hwL2VlanXlateRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Operation status."
::= { hwL2VlanXlateEntry 51 }
hwL2QinQVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2QinQVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of QinQ-VLAN configuration."
::= { hwL2VlanApply 36 }
hwL2QinQVlanEntry OBJECT-TYPE
SYNTAX HwL2QinQVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of QinQ-VLAN table."
INDEX {
hwL2QinQVlanIfIndex,
hwL2QinQVlanIdBegin,
hwL2QinQVlanIdEnd,
hwL2QinQVlanInnerVlanIdBegin,
hwL2QinQVlanInnerVlanIdEnd,
hwL2QinQVlan8021pBegin,
hwL2QinQVlan8021pEnd,
hwL2QinQVlanEtherType
}
::= { hwL2QinQVlanTable 1 }
HwL2QinQVlanEntry ::=
SEQUENCE {
hwL2QinQVlanIfIndex
InterfaceIndex,
hwL2QinQVlanIdBegin
VlanId,
hwL2QinQVlanIdEnd
VlanId,
hwL2QinQVlanInnerVlanIdBegin
VlanIdOrNone,
hwL2QinQVlanInnerVlanIdEnd
VlanIdOrNone,
hwL2QinQVlan8021pBegin
Integer32,
hwL2QinQVlan8021pEnd
Integer32,
hwL2QinQVlanEtherType
Integer32,
hwL2QinQVlanMode
INTEGER,
hwL2QinQVlanChangedVlanId
VlanId,
hwL2QinQVlanChangedInnerVlanId
VlanIdOrNone,
hwL2QinQVlanRemark
Integer32,
hwL2QinQVlanMapStackVlanId
VlanIdOrNone,
hwL2QinQVlanRowStatus
RowStatus
}
hwL2QinQVlanIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index number of QinQ-VLAN port."
::= { hwL2QinQVlanEntry 1 }
hwL2QinQVlanIdBegin OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The begin VLAN ID of outside."
::= { hwL2QinQVlanEntry 2 }
hwL2QinQVlanIdEnd OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The end VLAN ID of outside."
::= { hwL2QinQVlanEntry 3 }
hwL2QinQVlanInnerVlanIdBegin OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The begin VLAN ID of inside."
::= { hwL2QinQVlanEntry 4 }
hwL2QinQVlanInnerVlanIdEnd OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The end VLAN ID of inside."
::= { hwL2QinQVlanEntry 5 }
hwL2QinQVlan8021pBegin OBJECT-TYPE
SYNTAX Integer32(0..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The begin number of 8021p."
::= { hwL2QinQVlanEntry 6 }
hwL2QinQVlan8021pEnd OBJECT-TYPE
SYNTAX Integer32(0..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The end number of 8021p."
::= { hwL2QinQVlanEntry 7 }
hwL2QinQVlanEtherType OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The value of Ethernet Type."
::= { hwL2QinQVlanEntry 8 }
hwL2QinQVlanMode OBJECT-TYPE
SYNTAX INTEGER
{
stacking(1),
mapping(2),
cosstacking(3),
cosmapping(4),
mapping2to1(5),
mapping2to2(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The mode of QinQ-VLAN configuration."
::= { hwL2QinQVlanEntry 9 }
hwL2QinQVlanChangedVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The changed VLAN ID of outside."
::= { hwL2QinQVlanEntry 10 }
hwL2QinQVlanChangedInnerVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The changed VLAN ID of inside."
::= { hwL2QinQVlanEntry 11 }
hwL2QinQVlanRemark OBJECT-TYPE
SYNTAX Integer32(0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The remark number of outside 8021p.If the value is 8, the priority in
the outer tag is not changed."
::= { hwL2QinQVlanEntry 12 }
hwL2QinQVlanMapStackVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The map VLAN ID for inside after stacking action."
::= { hwL2QinQVlanEntry 13 }
hwL2QinQVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This table can read, create and delete."
::= { hwL2QinQVlanEntry 14 }
hwL2UntagAddDTagTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2UntagAddDTagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of untagged VLAN add double tagged VLAN configuration."
::= { hwL2VlanApply 37 }
hwL2UntagAddDTagEntry OBJECT-TYPE
SYNTAX HwL2UntagAddDTagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of untagged VLAN add double tagged VLAN table."
INDEX { hwL2UntagAddDTagPortIndex }
::= { hwL2UntagAddDTagTable 1 }
HwL2UntagAddDTagEntry ::=
SEQUENCE {
hwL2UntagAddDTagPortIndex
Integer32,
hwL2UntagAddDTagOuterVlanId
VlanId,
hwL2UntagAddDTagInnerVlanId
VlanId,
hwL2UntagAddDTagRowStatus
RowStatus
}
hwL2UntagAddDTagPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port index number of interface."
::= { hwL2UntagAddDTagEntry 1 }
hwL2UntagAddDTagOuterVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The outer VLAN ID."
::= { hwL2UntagAddDTagEntry 2 }
hwL2UntagAddDTagInnerVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The inner VLAN ID."
::= { hwL2UntagAddDTagEntry 3 }
hwL2UntagAddDTagRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This table can read, create and delete."
::= { hwL2UntagAddDTagEntry 4 }
hwL2VlanVoiceVlan8021p OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "It indicates the IEEE 802.1Q priority of the voice VLAN and the
default value is 6."
::= { hwL2VlanApply 38 }
hwL2VlanVoiceVlanDscp OBJECT-TYPE
SYNTAX Integer32(0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "It indicates the Differentiated Services CodePoint priority of
the voice VLAN and the default value is 0x2e."
::= { hwL2VlanApply 39 }
hwL2IfStatVlanCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2IfStatVlanCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains statistics enable configuration for the port and vlan."
::= { hwL2VlanStatistics 1 }
hwL2IfStatVlanCfgEntry OBJECT-TYPE
SYNTAX HwL2IfStatVlanCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of vlan and port statistics enable table."
INDEX { hwL2IfStatVlanCfgPortIndex,hwL2IfStatVlanCfgVlanId }
::= { hwL2IfStatVlanCfgTable 1 }
HwL2IfStatVlanCfgEntry ::=
SEQUENCE {
hwL2IfStatVlanCfgPortIndex
Integer32,
hwL2IfStatVlanCfgVlanId
VlanId,
hwL2IfStatVlanCfgEnableFlag
EnabledStatus,
hwL2IfStatVlanCfgRowStatus
RowStatus
}
hwL2IfStatVlanCfgPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..512)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The virtual index of L2 Interface."
::= { hwL2IfStatVlanCfgEntry 1 }
hwL2IfStatVlanCfgVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vlan-id of packets'tag that's received or sent out from the port."
::= { hwL2IfStatVlanCfgEntry 2 }
hwL2IfStatVlanCfgEnableFlag OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag of enable the statistic function based on vlan
in the interface."
::= { hwL2IfStatVlanCfgEntry 11 }
hwL2IfStatVlanCfgRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used for controlling the creation and deletion of this
row. All writable objects in this row may be modified at any time.
If a Network Management Application attempts to delete a conceptual
row by setting this object to 'destroy' and there are one or more entries
in hwL2IfStatVlanCfgTable pointing to the row, the agent MUST also
destroy the corresponding entries in hwL2IfStatVlanCfgTable."
::= { hwL2IfStatVlanCfgEntry 12 }
hwL2IfStat8021pCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2IfStat8021pCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains statistics enable for the port and 8021p."
::= { hwL2VlanStatistics 2 }
hwL2IfStat8021pCfgEntry OBJECT-TYPE
SYNTAX HwL2IfStat8021pCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of port and 8021p statistics enable table."
INDEX { hwL2IfStat8021pCfgPortIndex,hwL2IfStat8021pCfg8021p }
::= { hwL2IfStat8021pCfgTable 1 }
HwL2IfStat8021pCfgEntry ::=
SEQUENCE {
hwL2IfStat8021pCfgPortIndex
Integer32,
hwL2IfStat8021pCfg8021p
Integer32,
hwL2IfStat8021pCfgEnableFlag
EnabledStatus,
hwL2IfStat8021pCfgRowStatus
RowStatus
}
hwL2IfStat8021pCfgPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..512)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The virtual index of L2 Interface."
::= { hwL2IfStat8021pCfgEntry 1 }
hwL2IfStat8021pCfg8021p OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 8021p of packet's tag that's received or sent from the port."
::= { hwL2IfStat8021pCfgEntry 2 }
hwL2IfStat8021pCfgEnableFlag OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The flag of enable the static function based on 8021p
in the interface."
::= { hwL2IfStat8021pCfgEntry 11 }
hwL2IfStat8021pCfgRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used for controlling the creation and deletion of this
row. All writable objects in this row may be modified at any time.
If a Network Management Application attempts to delete a conceptual
row by setting this object to 'destroy' and there are one or more entries
in hwL2IfStat8021pCfgTable pointing to the row, the agent MUST also
destroy the corresponding entries in hwL2IfStat8021pCfgTable."
::= { hwL2IfStat8021pCfgEntry 12 }
hwL2IfStat8021pAndVlanCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2IfStat8021pAndVlanCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains statistics enable for the port, vlan and 8021p."
::= { hwL2VlanStatistics 3 }
hwL2IfStat8021pAndVlanCfgEntry OBJECT-TYPE
SYNTAX HwL2IfStat8021pAndVlanCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of port, 8021p and vlan statistics enable table."
INDEX { hwL2IfStat8021pAndVlanCfgPortIndex,hwL2IfStat8021pAndVlanCfgVlanId,
hwL2IfStat8021pAndVlanCfg8021p }
::= { hwL2IfStat8021pAndVlanCfgTable 1 }
HwL2IfStat8021pAndVlanCfgEntry ::=
SEQUENCE {
hwL2IfStat8021pAndVlanCfgPortIndex
Integer32,
hwL2IfStat8021pAndVlanCfgVlanId
VlanId,
hwL2IfStat8021pAndVlanCfg8021p
Integer32,
hwL2IfStat8021pAndVlanCfgEnableFlag
EnabledStatus,
hwL2IfStat8021pAndVlanCfgRowStatus
RowStatus
}
hwL2IfStat8021pAndVlanCfgPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..512)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The virtual index of L2 Interface."
::= { hwL2IfStat8021pAndVlanCfgEntry 1 }
hwL2IfStat8021pAndVlanCfgVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vlan-id of packet's tag that's received or sent out from the port."
::= { hwL2IfStat8021pAndVlanCfgEntry 2 }
hwL2IfStat8021pAndVlanCfg8021p OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 8021p value of packet's tag that's received or sent from the port."
::= { hwL2IfStat8021pAndVlanCfgEntry 3 }
hwL2IfStat8021pAndVlanCfgEnableFlag OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Flag of enable the static function based on vlan-id and 8021p
in the interface."
::= { hwL2IfStat8021pAndVlanCfgEntry 11 }
hwL2IfStat8021pAndVlanCfgRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used for controlling the creation and deletion of this
row. All writable objects in this row may be modified at any time.
If a Network Management Application attempts to delete a conceptual
row by setting this object to 'destroy' and there are one or more entries
in hwL2IfStat8021pAndVlanCfgTable pointing to the row, the agent MUST also
destroy the corresponding entries in hwL2IfStat8021pAndVlanCfgTable."
::= { hwL2IfStat8021pAndVlanCfgEntry 12 }
hwL2VlanStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains statistics information for the vlan."
::= { hwL2VlanStatistics 4 }
hwL2VlanStatEntry OBJECT-TYPE
SYNTAX HwL2VlanStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of vlan statistics table."
INDEX { hwL2VlanStatVlanId }
::= { hwL2VlanStatTable 1 }
HwL2VlanStatEntry ::=
SEQUENCE {
hwL2VlanStatVlanId
VlanId,
hwL2VlanStatInTotalPkts
Counter64,
hwL2VlanStatInTotalBytes
Counter64,
hwL2VlanStatOutTotalPkts
Counter64,
hwL2VlanStatOutTotalBytes
Counter64,
hwL2VlanStatUnknownUcastDiscardPkts
Counter64,
hwL2VlanStatUnknownMcastDiscardPkts
Counter64,
hwL2VlanStatBcastDiscardPkts
Counter64,
hwL2VlanStatInUcastPkts
Counter64,
hwL2VlanStatInUcastBytes
Counter64,
hwL2VlanStatOutUcastPkts
Counter64,
hwL2VlanStatOutUcastBytes
Counter64,
hwL2VlanStatInMcastPkts
Counter64,
hwL2VlanStatInMcastBytes
Counter64,
hwL2VlanStatOutMcastPkts
Counter64,
hwL2VlanStatOutMcastBytes
Counter64,
hwL2VlanStatInBcastPkts
Counter64,
hwL2VlanStatInBcastBytes
Counter64,
hwL2VlanStatOutBcastPkts
Counter64,
hwL2VlanStatOutBcastBytes
Counter64,
hwL2VlanStatResetFlag
EnabledStatus
}
hwL2VlanStatVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vlan-id."
::= { hwL2VlanStatEntry 1 }
hwL2VlanStatInTotalPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received packets."
::= { hwL2VlanStatEntry 2 }
hwL2VlanStatInTotalBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The byte number of received packets."
::= { hwL2VlanStatEntry 3 }
hwL2VlanStatOutTotalPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of sent packets."
::= { hwL2VlanStatEntry 4 }
hwL2VlanStatOutTotalBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The byte number of sent packets."
::= { hwL2VlanStatEntry 5 }
hwL2VlanStatUnknownUcastDiscardPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of aborted unknown unicast packets."
::= { hwL2VlanStatEntry 6 }
hwL2VlanStatUnknownMcastDiscardPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of aborted unknown multicast packets."
::= { hwL2VlanStatEntry 7 }
hwL2VlanStatBcastDiscardPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of aborted broadcast packets."
::= { hwL2VlanStatEntry 8 }
hwL2VlanStatInUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received unicast packets."
::= { hwL2VlanStatEntry 9 }
hwL2VlanStatInUcastBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received unicast packets' bytes."
::= { hwL2VlanStatEntry 10 }
hwL2VlanStatOutUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of sent unicast packets."
::= { hwL2VlanStatEntry 11 }
hwL2VlanStatOutUcastBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of sent unicast packets' bytes."
::= { hwL2VlanStatEntry 12 }
hwL2VlanStatInMcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received multicast packets."
::= { hwL2VlanStatEntry 13 }
hwL2VlanStatInMcastBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received multicast packets' bytes."
::= { hwL2VlanStatEntry 14 }
hwL2VlanStatOutMcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of sent multicast packets."
::= { hwL2VlanStatEntry 15 }
hwL2VlanStatOutMcastBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of sent multicast packets' bytes."
::= { hwL2VlanStatEntry 16 }
hwL2VlanStatInBcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received broadcast packets."
::= { hwL2VlanStatEntry 17 }
hwL2VlanStatInBcastBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received broadcast packets' bytes."
::= { hwL2VlanStatEntry 18 }
hwL2VlanStatOutBcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of sent broadcast packets."
::= { hwL2VlanStatEntry 19 }
hwL2VlanStatOutBcastBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of sent broadcast packets."
::= { hwL2VlanStatEntry 20 }
hwL2VlanStatResetFlag OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The flag of reset."
::= { hwL2VlanStatEntry 21 }
hwL2IfStatVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2IfStatVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains statistics information for the port and vlan."
::= { hwL2VlanStatistics 5 }
hwL2IfStatVlanEntry OBJECT-TYPE
SYNTAX HwL2IfStatVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of vlan and port statistics table."
INDEX { hwL2IfStatVlanPortIndex,hwL2IfStatVlanId }
::= { hwL2IfStatVlanTable 1 }
HwL2IfStatVlanEntry ::=
SEQUENCE {
hwL2IfStatVlanPortIndex
Integer32,
hwL2IfStatVlanId
VlanId,
hwL2IfStatVlanInTotalPkts
Counter64,
hwL2IfStatVlanInTotalBytes
Counter64,
hwL2IfStatVlanOutTotalPkts
Counter64,
hwL2IfStatVlanOutTotalBytes
Counter64,
hwL2IfStatVlanInPktsRate
Gauge32,
hwL2IfStatVlanInBytesRate
Gauge32,
hwL2IfStatVlanOutPktsRate
Gauge32,
hwL2IfStatVlanOutBytesRate
Gauge32,
hwL2IfStatVlanInUcastPkts
Counter64,
hwL2IfStatVlanInUcastBytes
Counter64,
hwL2IfStatVlanOutUcastPkts
Counter64,
hwL2IfStatVlanOutUcastBytes
Counter64,
hwL2IfStatVlanInMcastPkts
Counter64,
hwL2IfStatVlanInMcastBytes
Counter64,
hwL2IfStatVlanOutMcastPkts
Counter64,
hwL2IfStatVlanOutMcastBytes
Counter64,
hwL2IfStatVlanInBcastPkts
Counter64,
hwL2IfStatVlanInBcastBytes
Counter64,
hwL2IfStatVlanOutBcastPkts
Counter64,
hwL2IfStatVlanOutBcastBytes
Counter64,
hwL2IfStatVlanResetFlag
EnabledStatus
}
hwL2IfStatVlanPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..512)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The virtual Index of L2 Interface."
::= { hwL2IfStatVlanEntry 1 }
hwL2IfStatVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vlan-id of packets'tag that's received or sent out from the port."
::= { hwL2IfStatVlanEntry 2 }
hwL2IfStatVlanInTotalPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received packets."
::= { hwL2IfStatVlanEntry 3 }
hwL2IfStatVlanInTotalBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The bytes of received packets. "
::= { hwL2IfStatVlanEntry 4 }
hwL2IfStatVlanOutTotalPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of sent packets."
::= { hwL2IfStatVlanEntry 5 }
hwL2IfStatVlanOutTotalBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bytes of sent packets."
::= { hwL2IfStatVlanEntry 6 }
hwL2IfStatVlanInPktsRate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The rate of received packets."
::= { hwL2IfStatVlanEntry 7 }
hwL2IfStatVlanInBytesRate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate of received bytes."
::= { hwL2IfStatVlanEntry 8 }
hwL2IfStatVlanOutPktsRate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate of sent packet."
::= { hwL2IfStatVlanEntry 9 }
hwL2IfStatVlanOutBytesRate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate of sent bytes."
::= { hwL2IfStatVlanEntry 10 }
hwL2IfStatVlanInUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of unicast packets received."
::= { hwL2IfStatVlanEntry 11 }
hwL2IfStatVlanInUcastBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of unicast bytes received."
::= { hwL2IfStatVlanEntry 12 }
hwL2IfStatVlanOutUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The packet number of unicast packets sent."
::= { hwL2IfStatVlanEntry 13 }
hwL2IfStatVlanOutUcastBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unicast bytes sent."
::= { hwL2IfStatVlanEntry 14 }
hwL2IfStatVlanInMcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of multicast packets received."
::= { hwL2IfStatVlanEntry 15 }
hwL2IfStatVlanInMcastBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of multicast bytes received."
::= { hwL2IfStatVlanEntry 16 }
hwL2IfStatVlanOutMcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of multicast packets sent."
::= { hwL2IfStatVlanEntry 17 }
hwL2IfStatVlanOutMcastBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of multicast bytes sent."
::= { hwL2IfStatVlanEntry 18 }
hwL2IfStatVlanInBcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of broadcast packets received."
::= { hwL2IfStatVlanEntry 19 }
hwL2IfStatVlanInBcastBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of broadcast bytes received. "
::= { hwL2IfStatVlanEntry 20 }
hwL2IfStatVlanOutBcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of broadcast packets sent."
::= { hwL2IfStatVlanEntry 21 }
hwL2IfStatVlanOutBcastBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of broadcast bytes sent."
::= { hwL2IfStatVlanEntry 22 }
hwL2IfStatVlanResetFlag OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The flag of reset the statistic counter. "
::= { hwL2IfStatVlanEntry 23 }
hwL2IfStat8021pTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2IfStat8021pEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains statistics information for the port and 8021p."
::= { hwL2VlanStatistics 6 }
hwL2IfStat8021pEntry OBJECT-TYPE
SYNTAX HwL2IfStat8021pEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of port and 8021p statistics table."
INDEX { hwL2IfStat8021pPortIndex,hwL2IfStat8021p }
::= { hwL2IfStat8021pTable 1 }
HwL2IfStat8021pEntry ::=
SEQUENCE {
hwL2IfStat8021pPortIndex
Integer32,
hwL2IfStat8021p
Integer32,
hwL2IfStat8021pInTotalPkts
Counter64,
hwL2IfStat8021pInTotalBytes
Counter64,
hwL2IfStat8021pOutTotalPkts
Counter64,
hwL2IfStat8021pOutTotalBytes
Counter64,
hwL2IfStat8021pInPktsRate
Gauge32,
hwL2IfStat8021pInBytsRate
Gauge32,
hwL2IfStat8021pOutPktsRate
Gauge32,
hwL2IfStat8021pOutBytesRate
Gauge32,
hwL2IfStat8021pResetFlag
EnabledStatus
}
hwL2IfStat8021pPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..512)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The virtual index of L2 Interface."
::= { hwL2IfStat8021pEntry 1 }
hwL2IfStat8021p OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The priority of the packet's tag."
::= { hwL2IfStat8021pEntry 2 }
hwL2IfStat8021pInTotalPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received packets."
::= { hwL2IfStat8021pEntry 3 }
hwL2IfStat8021pInTotalBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The bytes of received packets. "
::= { hwL2IfStat8021pEntry 4 }
hwL2IfStat8021pOutTotalPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of sent packets."
::= { hwL2IfStat8021pEntry 5 }
hwL2IfStat8021pOutTotalBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bytes of sent packets."
::= { hwL2IfStat8021pEntry 6 }
hwL2IfStat8021pInPktsRate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The rate of received packets. "
::= { hwL2IfStat8021pEntry 7 }
hwL2IfStat8021pInBytsRate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate of received bytes."
::= { hwL2IfStat8021pEntry 8 }
hwL2IfStat8021pOutPktsRate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate of the sent packets."
::= { hwL2IfStat8021pEntry 9 }
hwL2IfStat8021pOutBytesRate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate of sent bytes."
::= { hwL2IfStat8021pEntry 10 }
hwL2IfStat8021pResetFlag OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The flag of reset the statistic counter."
::= { hwL2IfStat8021pEntry 11 }
hwL2IfStat8021pAndVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2IfStat8021pAndVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains statistics information for the port ,8021p and vlan-id."
::= { hwL2VlanStatistics 7 }
hwL2IfStat8021pAndVlanEntry OBJECT-TYPE
SYNTAX HwL2IfStat8021pAndVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of port statistics table based on 8021p and vlan-id fields."
INDEX { hwL2IfStat8021pAndVlanPortIndex,hwL2IfStat8021pAndVlanVlanId,hwL2IfStat8021pAndVlan8021p }
::= { hwL2IfStat8021pAndVlanTable 1 }
HwL2IfStat8021pAndVlanEntry ::=
SEQUENCE {
hwL2IfStat8021pAndVlanPortIndex
Integer32,
hwL2IfStat8021pAndVlanVlanId
VlanId,
hwL2IfStat8021pAndVlan8021p
Integer32,
hwL2IfStat8021pAndVlanInTotalPkts
Counter64,
hwL2IfStat8021pAndVlanInTotalBytes
Counter64,
hwL2IfStat8021pAndVlanInPktsRate
Gauge32,
hwL2IfStat8021pAndVlanInBytsRate
Gauge32,
hwL2IfStat8021pAndVlanResetFlag
EnabledStatus
}
hwL2IfStat8021pAndVlanPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..512)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The virtual Index of L2 Interface."
::= { hwL2IfStat8021pAndVlanEntry 1 }
hwL2IfStat8021pAndVlanVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Vlan-id."
::= { hwL2IfStat8021pAndVlanEntry 2 }
hwL2IfStat8021pAndVlan8021p OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The priority in the 8021p packets'tag."
::= { hwL2IfStat8021pAndVlanEntry 3 }
hwL2IfStat8021pAndVlanInTotalPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received packets."
::= { hwL2IfStat8021pAndVlanEntry 4 }
hwL2IfStat8021pAndVlanInTotalBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bytes of received packets."
::= { hwL2IfStat8021pAndVlanEntry 5 }
hwL2IfStat8021pAndVlanInPktsRate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate of received packets. "
::= { hwL2IfStat8021pAndVlanEntry 6 }
hwL2IfStat8021pAndVlanInBytsRate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The rate of received bytes. "
::= { hwL2IfStat8021pAndVlanEntry 7 }
hwL2IfStat8021pAndVlanResetFlag OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The flag of reset statistic counters."
::= { hwL2IfStat8021pAndVlanEntry 8 }
hwL2VlanSwitchPSTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2VlanSwitchPSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table to config the vlan switch by Port+SVlan index."
::= { hwL2VlanStatistics 8 }
hwL2VlanSwitchPSEntry OBJECT-TYPE
SYNTAX HwL2VlanSwitchPSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the vlan switch IfIndex+SVlan table."
INDEX { hwL2VlanSwitchPSIfIndex, hwL2VlanSwitchPSSVlanId, hwL2VlanSwitchPSCVlanId }
::= { hwL2VlanSwitchPSTable 1 }
HwL2VlanSwitchPSEntry ::=
SEQUENCE {
hwL2VlanSwitchPSIfIndex
InterfaceIndex,
hwL2VlanSwitchPSSVlanId
Integer32,
hwL2VlanSwitchPSCVlanId
Integer32,
hwL2VlanSwitchPSInputPkts
Counter64,
hwL2VlanSwitchPSInputBytes
Counter64,
hwL2VlanSwitchPSOutputPkts
Counter64,
hwL2VlanSwitchPSOutputBytes
Counter64,
hwL2VlanSwitchPSResetFlag
EnabledStatus,
hwL2VlanSwitchPSEnableFlag
EnabledStatus
}
hwL2VlanSwitchPSIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface index."
::= { hwL2VlanSwitchPSEntry 1 }
hwL2VlanSwitchPSSVlanId OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Vlan-id."
::= { hwL2VlanSwitchPSEntry 2 }
hwL2VlanSwitchPSCVlanId OBJECT-TYPE
SYNTAX Integer32(0..4096)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"CVlan-id."
::= { hwL2VlanSwitchPSEntry 3 }
hwL2VlanSwitchPSInputPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound discard packets."
::= { hwL2VlanSwitchPSEntry 4 }
hwL2VlanSwitchPSInputBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound discard bytes."
::= { hwL2VlanSwitchPSEntry 5 }
hwL2VlanSwitchPSOutputPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound discard packets."
::= { hwL2VlanSwitchPSEntry 6 }
hwL2VlanSwitchPSOutputBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound discard bytes."
::= { hwL2VlanSwitchPSEntry 7 }
hwL2VlanSwitchPSResetFlag OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The flag of reset statistics."
::= { hwL2VlanSwitchPSEntry 8 }
hwL2VlanSwitchPSEnableFlag OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The flag of enable statistics."
::= { hwL2VlanSwitchPSEntry 9 }
hwL2VlanTraps OBJECT IDENTIFIER ::= { hwL2VlanMngObjects 4 }
hwL2VlanUnkownPacketAlarm NOTIFICATION-TYPE
OBJECTS { hwBaseTrapSeverity, hwBaseTrapProbableCause, hwBaseTrapEventType, hwL2VlanStatUnknownUcastDiscardPkts, hwL2VlanStatUnknownMcastDiscardPkts, hwL2VlanStatBcastDiscardPkts}
STATUS current
DESCRIPTION
"Warning of unkown Packets in vlan."
::= { hwL2VlanTraps 1 }
-- -------------------------------------------------------------
-- IEEE 802.1Q MIB - Conformance Information
-- -------------------------------------------------------------
hwL2vlanConformance OBJECT IDENTIFIER ::= { hwL2Vlan 2 }
hwL2vlanGroups OBJECT IDENTIFIER ::= { hwL2vlanConformance 1 }
hwL2vlanCompliances OBJECT IDENTIFIER ::= { hwL2vlanConformance 2 }
-- -------------------------------------------------------------
-- units of conformance
-- -------------------------------------------------------------
hwL2VlanMIBTableGroup OBJECT-GROUP
OBJECTS {
hwL2VlanDescr ,
hwL2VlanPortList ,
hwL2VlanType ,
hwL2VlanUnknownUnicastProcessing ,
hwL2VlanIfIndex ,
hwL2VlanMacLearn ,
hwL2VlanCreateStatus ,
hwL2VlanMulticast ,
hwL2VlanAdminStatus ,
hwL2VlanStatisStatus ,
hwL2VlanRowStatus ,
hwL2VlanBcast ,
hwL2VlanUnknownMulticastProcessing ,
hwL2VlanProperty ,
hwL2VlanAgingTime,
hwL2VlanName,
hwL2VlanSmartMacLearn,
hwL2VlanServiceName,
hwL2VlanManagementVlan,
hwL2VlanDynamicVlan
}
STATUS current
DESCRIPTION
"A collection of objects providing device level control
and status information for the Virtual LAN bridge
services."
::= { hwL2vlanGroups 1 }
hwL2vlanStackingGroup OBJECT-GROUP
OBJECTS {
hwL2VlanStackingOutsideVlanListLow ,
hwL2VlanStackingOutsideVlanListHigh ,
hwL2VlanStackingRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing l2vlan stacking service."
::= { hwL2vlanGroups 2 }
hwL2vlanMappingGroup OBJECT-GROUP
OBJECTS {
hwL2VlanMappingOutsideVlanListLow ,
hwL2VlanMappingOutsideVlanListHigh ,
hwL2VlanMappingRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing l2vlan mapping service."
::= { hwL2vlanGroups 3 }
hwSupervlanGroup OBJECT-GROUP
OBJECTS {
hwSubVlanListLow ,
hwSubVlanListHigh
}
STATUS current
DESCRIPTION
"A collection of objects providing supervlan service."
::= { hwL2vlanGroups 4 }
hwL2InterfIsolateGroup OBJECT-GROUP
OBJECTS {
hwL2InterfIsolateInterflistLow ,
hwL2InterfIsolateInterflistHigh
}
STATUS current
DESCRIPTION
"A collection of objects provding l2interfisolate service. "
::= { hwL2vlanGroups 5 }
hwL2IsolatemappingGroup OBJECT-GROUP
OBJECTS {
hwL2IsolateInterflistLow ,
hwL2IsolateInterflistHigh
}
STATUS current
DESCRIPTION
"A collection of objects provding enhanced l2isolate service. "
::= { hwL2vlanGroups 6 }
hwL2VlanStackingExtGroup OBJECT-GROUP
OBJECTS {
hwL2VlanStackingExtVlanListLow ,
hwL2VlanStackingExtVlanListHigh ,
hwL2VlanStackingExtPriorityMode,
hwL2VlanStackingExtVlan8021p,
hwL2VlanStackingExtRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing flexible QinQ service."
::= { hwL2vlanGroups 7 }
hwL2vlanQinQGroup OBJECT-GROUP
OBJECTS {
hwL2VlanQinQOutSideVlanId ,
hwL2VlanSysQinQRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing l2vlan QinQ service."
::= { hwL2vlanGroups 8 }
hwL2vlanQinQInterfaceGroup OBJECT-GROUP
OBJECTS {
hwL2VlanQinQSVlanId ,
hwL2VlanQinQAction ,
hwL2VlanQinQNewCVlanId ,
hwL2VlanInterfaceQinQRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing l2vlan QinQ service."
::= { hwL2vlanGroups 9}
hwL2DVlanMappingGroup OBJECT-GROUP
OBJECTS {
hwL2DVlanMappingMapExternalVlanId ,
hwL2DVlanMappingMapInternalVlanId ,
hwL2DVlanMappingAction ,
hwL2DVlanMappingRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing double Vlan-Mapping service."
::= { hwL2vlanGroups 10 }
hwL2VlanStackingAdvGroup OBJECT-GROUP
OBJECTS {
hwL2VlanStackingAdvOutsideVlanListLow,
hwL2VlanStackingAdvOutsideVlanListHigh,
hwL2VlanStackingAdvRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects vlan Stacking 8021p."
::= { hwL2vlanGroups 11 }
hwL2VlanMappingAdvGroup OBJECT-GROUP
OBJECTS {
hwL2VlanMappingAdvOutsideVlanListLow ,
hwL2VlanMappingAdvOutsideVlanListHigh ,
hwL2VlanMappingAdvRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects Vlan-Mapping 8021p."
::= { hwL2vlanGroups 12 }
hwL2VlanSwitchGroup OBJECT-GROUP
OBJECTS {
hwL2VlanSwitchMode,
hwL2VlanSwitchOuterSwitchVlanId,
hwL2VlanSwitchInnerSwitchVlanId,
hwL2VlanSwitch8021pRemark,
hwL2VlanSwitchOutIfIndex,
hwL2VlanSwitchMtu,
hwL2VlanSwitchMtuDiscardPkts,
hwL2VlanSwitchMtuDiscardBytes,
hwL2VlanSwitchMtuResetFlag,
hwL2VlanSwitchMtuEnableFlag,
hwL2VlanSwitchRowStatus
}
STATUS current
DESCRIPTION
"A collection of hwL2VlanSwitchTable objects."
::= { hwL2vlanGroups 13 }
hwL2IfStatVlanCfgGroup OBJECT-GROUP
OBJECTS {
hwL2IfStatVlanCfgEnableFlag,
hwL2IfStatVlanCfgRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects enable the vlan statistic funtion in the port."
::= { hwL2vlanGroups 14 }
hwL2IfStat8021pCfgGroup OBJECT-GROUP
OBJECTS {
hwL2IfStat8021pCfgEnableFlag,
hwL2IfStat8021pCfgRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects enable the 8021p statistic funtion in the port."
::= { hwL2vlanGroups 15 }
hwL2IfStat8021pAndVlanCfgGroup OBJECT-GROUP
OBJECTS {
hwL2IfStat8021pAndVlanCfgEnableFlag,
hwL2IfStat8021pAndVlanCfgRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects enable the 8021p and vlan statistic funtion in the port."
::= { hwL2vlanGroups 16 }
hwL2VlanStatGroup OBJECT-GROUP
OBJECTS {
hwL2VlanStatInTotalPkts,
hwL2VlanStatInTotalBytes ,
hwL2VlanStatOutTotalPkts,
hwL2VlanStatOutTotalBytes,
hwL2VlanStatUnknownUcastDiscardPkts,
hwL2VlanStatUnknownMcastDiscardPkts,
hwL2VlanStatBcastDiscardPkts ,
hwL2VlanStatInUcastPkts,
hwL2VlanStatInUcastBytes,
hwL2VlanStatOutUcastPkts,
hwL2VlanStatOutUcastBytes,
hwL2VlanStatInMcastPkts,
hwL2VlanStatInMcastBytes,
hwL2VlanStatOutMcastPkts,
hwL2VlanStatOutMcastBytes,
hwL2VlanStatInBcastPkts,
hwL2VlanStatInBcastBytes,
hwL2VlanStatOutBcastPkts,
hwL2VlanStatOutBcastBytes,
hwL2VlanStatResetFlag
}
STATUS current
DESCRIPTION
"A collection of objects vlan statistic in the port."
::= { hwL2vlanGroups 17 }
hwL2IfStatVlanGroup OBJECT-GROUP
OBJECTS {
hwL2IfStatVlanInTotalPkts,
hwL2IfStatVlanInTotalBytes ,
hwL2IfStatVlanOutTotalPkts,
hwL2IfStatVlanOutTotalBytes ,
hwL2IfStatVlanInPktsRate,
hwL2IfStatVlanInBytesRate,
hwL2IfStatVlanOutPktsRate,
hwL2IfStatVlanOutBytesRate,
hwL2IfStatVlanInUcastPkts,
hwL2IfStatVlanInUcastBytes,
hwL2IfStatVlanOutUcastPkts,
hwL2IfStatVlanOutUcastBytes,
hwL2IfStatVlanInMcastPkts,
hwL2IfStatVlanInMcastBytes,
hwL2IfStatVlanOutMcastPkts,
hwL2IfStatVlanOutMcastBytes,
hwL2IfStatVlanInBcastPkts,
hwL2IfStatVlanInBcastBytes,
hwL2IfStatVlanOutBcastPkts,
hwL2IfStatVlanOutBcastBytes,
hwL2IfStatVlanResetFlag
}
STATUS current
DESCRIPTION
"A collection of objects vlan statistic in the port."
::= { hwL2vlanGroups 18 }
hwL2IfStat8021pGroup OBJECT-GROUP
OBJECTS {
hwL2IfStat8021pInTotalPkts,
hwL2IfStat8021pInTotalBytes ,
hwL2IfStat8021pOutTotalPkts,
hwL2IfStat8021pOutTotalBytes ,
hwL2IfStat8021pInPktsRate,
hwL2IfStat8021pInBytsRate,
hwL2IfStat8021pOutPktsRate,
hwL2IfStat8021pOutBytesRate,
hwL2IfStat8021pResetFlag
}
STATUS current
DESCRIPTION
"A collection of objects 8021p statistic in the port."
::= { hwL2vlanGroups 19 }
hwL2IfStat8021pAndVlanGroup OBJECT-GROUP
OBJECTS {
hwL2IfStat8021pAndVlanInTotalPkts,
hwL2IfStat8021pAndVlanInTotalBytes ,
hwL2IfStat8021pAndVlanInPktsRate,
hwL2IfStat8021pAndVlanInBytsRate,
hwL2IfStat8021pAndVlanResetFlag
}
STATUS current
DESCRIPTION
"A collection of objects vlan and 8021p statistic in the port."
::= { hwL2vlanGroups 20 }
hwL2VlanMappingExtGroup OBJECT-GROUP
OBJECTS {
hwL2VlanMappingExtVlanListLow,
hwL2VlanMappingExtVlanListHigh,
hwL2VlanMappingExtRowStatus,
hwL2VlanMappingExtPriorityMode,
hwL2VlanMappingExtVlan8021p
}
STATUS current
DESCRIPTION
"A collection of objects VLAN Mapping in the port."
::= { hwL2vlanGroups 21 }
hwL2VlanQinqVlanTransEnaGroup OBJECT-GROUP
OBJECTS {
hwL2VlanQinqVlanTransEna,
hwL2VlanQinqVlanTransEnaRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects QinQ VLAN translation enable in the port."
::= { hwL2vlanGroups 22 }
hwL2VlanQinqVlanTransMissDropGroup OBJECT-GROUP
OBJECTS {
hwL2VlanQinqVlanTransMissDrop,
hwL2VlanQinqVlanTransMissDropRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects QinQ VLAN translation miss drop in the port."
::= { hwL2vlanGroups 23 }
hwL2VlanViewMappingGroup OBJECT-GROUP
OBJECTS {
hwL2VlanViewMappingMapVlanId,
hwL2VlanViewMappingPriorityMode,
hwL2VlanViewMappingVlan8021p,
hwL2VlanViewMappingRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects VLAN Mapping at the VLAN view."
::= { hwL2vlanGroups 24 }
hwL2VlanStackingMaskGroup OBJECT-GROUP
OBJECTS {
hwL2VlanStackingMaskVlanListLow,
hwL2VlanStackingMaskVlanListHigh,
hwL2VlanStackingMaskRowStatus
}
STATUS current
DESCRIPTION
"A collection of hwL2VlanStackingMaskTable objects."
::= { hwL2vlanGroups 25 }
hwL2VlanIpSubnetVlanGroup OBJECT-GROUP
OBJECTS {
hwL2VlanIpSubnetVlanIpAddress,
hwL2VlanIpSubnetVlanIpSubnetMask,
hwL2VlanIpSubnetVlanPriority,
hwL2VlanIpSubnetVlanRowStatus
}
STATUS current
DESCRIPTION
"A collection of hwL2VlanIpSubnetVlanTable objects."
::= { hwL2vlanGroups 26 }
hwL2VlanMacVlanGroup OBJECT-GROUP
OBJECTS {
hwL2VlanMacVlanVlanId,
hwL2VlanMacVlanMac,
hwL2VlanMacVlanVlanPriority,
hwL2VlanMacVlanMacRowStatus
}
STATUS current
DESCRIPTION
"A collection of hwL2VlanMacVlanTable objects."
::= { hwL2vlanGroups 27 }
hwL2VlanProtocolVlanGroup OBJECT-GROUP
OBJECTS {
hwL2VlanProtocolVlanProtocolType,
hwL2VlanProtocolVlanEncapType,
hwL2VlanProtocolVlanRowStatus
}
STATUS current
DESCRIPTION
"A collection of hwL2VlanProtocolVlanTable objects."
::= { hwL2vlanGroups 28 }
hwL2VlanPolicyVlanGroup OBJECT-GROUP
OBJECTS {
hwL2VlanPolicyVlanVlanId,
hwL2VlanPolicyVlanVlanPriority,
hwL2VlanPolicyVlanMac,
hwL2VlanPolicyVlanIp,
hwL2VlanPolicyVlanPort,
hwL2VlanPolicyVlanRowStatus
}
STATUS current
DESCRIPTION
"A collection of hwL2VlanPolicyVlanTable objects."
::= { hwL2vlanGroups 29 }
hwL2VlanVoiceVlanGroup OBJECT-GROUP
OBJECTS {
hwL2VlanVoiceVlanEnabledVlanId ,
hwL2VlanVoiceVlanAgingTime,
hwL2VlanVoiceVlanSecurityMode,
hwL2VlanVoiceVlanPortEnable,
hwL2VlanVoiceVlanPortMode,
hwL2VlanVoiceVlanPortLegacy,
hwL2VlanVoiceVlanPortSecurityMode,
hwL2VlanVoiceVlanOuiDescription,
hwL2VlanVoiceVlanOuiRowStatus,
hwL2VlanVoiceVlan8021p,
hwL2VlanVoiceVlanDscp
}
STATUS current
DESCRIPTION
"A collection of Voice VLAN related objects."
::= { hwL2vlanGroups 30 }
hwL2VlanMappingMultiGroup OBJECT-GROUP
OBJECTS {
hwL2VlanMappingMultiVlanListLow,
hwL2VlanMappingMultiVlanListHigh,
hwL2VlanMappingMultiRowStatus
}
STATUS current
DESCRIPTION
"A collection of hwL2VlanMappingMultiTable objects."
::= { hwL2vlanGroups 31 }
hwL2VlanSwitchPSGroup OBJECT-GROUP
OBJECTS {
hwL2VlanSwitchPSInputPkts,
hwL2VlanSwitchPSInputBytes,
hwL2VlanSwitchPSOutputPkts,
hwL2VlanSwitchPSOutputBytes,
hwL2VlanSwitchPSResetFlag,
hwL2VlanSwitchPSEnableFlag
}
STATUS current
DESCRIPTION
"A collection of vlan statistic in the port."
::= { hwL2vlanGroups 32 }
hwL2VlanMacVlanNewGroup OBJECT-GROUP
OBJECTS {
hwL2VlanMacVlanNewVlanId,
hwL2VlanMacVlanNewVlanPriority,
hwL2VlanMacVlanNewMacRowStatus
}
STATUS current
DESCRIPTION
"A collection of hwL2VlanMacVlanNewTable objects."
::= { hwL2vlanGroups 33 }
hwL2VlanProtocolVlanNewGroup OBJECT-GROUP
OBJECTS {
hwL2VlanProtocolVlanNewProtocolType,
hwL2VlanProtocolVlanNewProtocolTypeValue,
hwL2VlanProtocolVlanNewRowStatus
}
STATUS current
DESCRIPTION
"A collection of hwL2VlanProtocolVlanNewTable objects."
::= { hwL2vlanGroups 34 }
hwL2VlanPolicyVlanNewGroup OBJECT-GROUP
OBJECTS {
hwL2VlanPolicyVlanNewVlanPriority,
hwL2VlanPolicyVlanNewRowStatus
}
STATUS current
DESCRIPTION
"A collection of hwL2VlanPolicyVlanNewTable objects."
::= { hwL2vlanGroups 35 }
hwL2VlanProtocolVlanPortNewGroup OBJECT-GROUP
OBJECTS {
hwL2VlanProtocolVlanPortNewPriority ,
hwL2VlanProtocolVlanPortNewRowStatus }
STATUS current
DESCRIPTION
"A group of protocol vlan port."
::= { hwL2vlanGroups 36 }
hwL2VlanMultiVoiceVlanPortGroup OBJECT-GROUP
OBJECTS {
hwL2VlanMultiVoiceVlanPortVLanId,
hwL2VlanMultiVoiceVlanPortRowStatus }
STATUS current
DESCRIPTION
"A collection of hwL2VlanMultiVoiceVlanPortTable objects."
::= { hwL2vlanGroups 37 }
hwL2VlanPrecedenceGroup OBJECT-GROUP
OBJECTS {
hwL2VlanPrecedence
}
STATUS current
DESCRIPTION
"A collection of hwL2VlanPrecedence object."
::= { hwL2vlanGroups 38 }
hwL2VlanXlateGroup OBJECT-GROUP
OBJECTS {
hwL2VlanXlateVlanIdEnd,
hwL2VlanXlateAction,
hwL2VlanXlateToVlanId,
hwL2VlanXlateToinnerVlanId,
hwL2VlanXlateremark,
hwL2VlanXlateRowStatus
}
STATUS current
DESCRIPTION
"A collection of hwL2VlanXlateGroup object."
::= { hwL2vlanGroups 39 }
hwL2VlanSwitchExtGroup OBJECT-GROUP
OBJECTS { hwL2VlanSwitchExtSrcIfIndex, hwL2VlanSwitchExtDstIfIndex, hwL2VlanSwitchExtDstInnerVlan, hwL2VlanSwitchExtRowStatus,
hwL2VlanSwitchExtLinkStatus, hwL2VlanSwitchExtVlanXlateAction, hwL2VlanSwitchExtDstVlan, hwL2VlanSwitchExtRemark, hwL2VlanSwitchExtRemarkReverse,
hwL2VlanSwitchExtOuterVlanId, hwL2VlanSwitchExtVlanListLow, hwL2VlanSwitchExtVlanListHigh }
STATUS current
DESCRIPTION
"A group of vlan switch extent table."
::= { hwL2vlanGroups 40 }
hwL2QinQVlanGroup OBJECT-GROUP
OBJECTS {
hwL2QinQVlanMode,
hwL2QinQVlanChangedVlanId,
hwL2QinQVlanChangedInnerVlanId,
hwL2QinQVlanRemark,
hwL2QinQVlanMapStackVlanId,
hwL2QinQVlanRowStatus
}
STATUS current
DESCRIPTION
"A group of QinQ-VLAN table."
::= { hwL2vlanGroups 41 }
hwL2UntagAddDTagGroup OBJECT-GROUP
OBJECTS {
hwL2UntagAddDTagOuterVlanId,
hwL2UntagAddDTagInnerVlanId,
hwL2UntagAddDTagRowStatus
}
STATUS current
DESCRIPTION
"A group of untagged VLAN add double tagged VLAN table."
::= { hwL2vlanGroups 42 }
hwL2VlanTrapsGroups OBJECT IDENTIFIER ::= { hwL2vlanConformance 3 }
hwL2VlanTrapsGroup NOTIFICATION-GROUP
NOTIFICATIONS
{
hwL2VlanUnkownPacketAlarm
}
STATUS current
DESCRIPTION
"The Group of L2VLAN Trap."
::= { hwL2VlanTrapsGroups 1 }
-- -------------------------------------------------------------
-- compliance statements
-- -------------------------------------------------------------
hwL2vlanCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for device support of Virtual
LAN services."
MODULE
MANDATORY-GROUPS {
hwL2VlanMIBTableGroup,
hwSupervlanGroup
}
GROUP hwL2vlanStackingGroup
DESCRIPTION
"This group is optional ."
GROUP hwL2vlanMappingGroup
DESCRIPTION
"This group is optional ."
GROUP hwL2InterfIsolateGroup
DESCRIPTION
"This group is optional ."
GROUP hwL2IsolatemappingGroup
DESCRIPTION
"This group is optional ."
GROUP hwL2vlanQinQGroup
DESCRIPTION
"This group is optional ."
GROUP hwL2vlanQinQInterfaceGroup
DESCRIPTION
"This group is optional ."
GROUP hwL2DVlanMappingGroup
DESCRIPTION
"This group is optional ."
GROUP hwL2VlanStackingAdvGroup
DESCRIPTION
"This group is optional ."
GROUP hwL2VlanMappingAdvGroup
DESCRIPTION
"This group is optional ."
GROUP hwL2VlanSwitchGroup
DESCRIPTION
"This group is optional ."
::= { hwL2vlanCompliances 1 }
END
View Git Blame Copy Permalink