compass-core/mibs/HUAWEI-VPLS-EXT-MIB.mib

2779 lines
94 KiB
Plaintext

-- ==================================================================
-- Copyright (C) 2006 by HUAWEI TECHNOLOGIES. All rights reserved.
--
-- Description: HUAWEI VPLS Management Extended MIB
-- Reference:
-- Version: V1.0
-- History:
-- V1.0 PanJun, 2006-05-08, publish
-- ==================================================================
HUAWEI-VPLS-EXT-MIB DEFINITIONS ::= BEGIN
IMPORTS
hwDatacomm
FROM HUAWEI-MIB
InterfaceIndex,InterfaceIndexOrZero,ifName
FROM IF-MIB
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
FROM SNMPv2-CONF
sysUpTime
FROM SNMPv2-MIB
IpAddress,TimeTicks,Unsigned32, Counter64, OBJECT-TYPE, MODULE-IDENTITY,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
DisplayString, RowStatus, TruthValue, TEXTUAL-CONVENTION,DateAndTime
FROM SNMPv2-TC
VrId
FROM VRRP-MIB
EnabledStatus
FROM P-BRIDGE-MIB;
hwL2VpnVplsExt MODULE-IDENTITY
LAST-UPDATED "200704122100Z" -- April 12, 2007 at 21:00 GMT
ORGANIZATION
"Huawei Technologies Co., Ltd."
CONTACT-INFO
"R&D BeiJing, Huawei Technologies co.,Ltd.
Huawei Bld.,NO.3 Xinxi Rd.,
Shang-Di Information Industry Base,
Hai-Dian District Beijing P.R. China
Zip:100085
Http://www.huawei.com
E-mail:support@huawei.com"
DESCRIPTION
"The HUAWEI-VPLS-EXT-MIB contains objects to
manage VPLS."
::= { hwL2Vpn 1 }
--
-- Textual conventions
--
HWL2VpnVcEncapsType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An indication of the L2Vpn's VC encapsulation type:
Frame Relay DLCI ( Martini Mode ) (1)
ATM AAL5 SDU VCC transport (2)
ATM transparent cell transport (3)
Vlan (4)
Ethernet (5)
HDLC (6)
PPP (7)
SONET/SDH Circuit Emulation Service Over MPLS (CEM) (8)
ATM n-to-one VCC cell transport (9)
ATM n-to-one VPC cell transport (10)
IP Layer2 Transport (11)
ATM one-to-one VCC Cell Mode (12)
ATM one-to-one VPC Cell Mode (13)
ATM AAL5 PDU VCC transport (14)
Frame-Relay Port mode (15)
SONET/SDH Circuit Emulation over Packet (CEP) (16)
Structure-agnostic E1 over Packet (SAE1oP) (17)
Structure-agnostic T1 (DS1) over Packet (SAT1oP) (18)
Structure-agnostic E3 over Packet (SAE3oP) (19)
Structure-agnostic T3 (DS3) over Packet (SAT3oP) (20)
CESoPSN basic mode (21)
TDMoIP basic mode (22)
CESoPSN TDM with CAS (23)
TDMoIP TDM with CAS (24)
Frame Relay DLCI (25)
IP-interworking (64)
unknown (255)
"
SYNTAX INTEGER
{
frameRelayDlciMartini(1),
atmAal5SduVccTransport(2),
atmTransparentCellTransport(3),
vlan(4),
ethernet(5),
hdlc(6),
ppp(7),
cem(8),
atmN2OneVccCellTransport(9),
atmN2OneVpcCellTransport(10),
ipLayer2Transport(11),
atmOne2OneVccCellMode(12),
atmOne2OneVpcCellMode(13),
atmAal5PduVccTransport(14),
frameRelayPortMode(15),
cep(16),
saE1oP(17),
saT1oP(18),
saE3oP(19),
saT3oP(20),
cESoPsnBasicMode(21),
tDMoIPbasicMode(22),
l2VpnCESoPSNTDMwithCAS(23),
l2VpnTDMoIPTDMwithCAS(24),
frameRelayDlci(25),
ipInterworking(64),
unknown(255)
}
HWEnableValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a boolean value."
SYNTAX INTEGER
{
enable(1),
disable(2)
}
HWL2VpnStateChangeReason ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The type indicates the reason of VC's or VSI's status change:
Invalid reason type (1)
VC Created (2)
VC Deleted (3)
LDP Session Down (4)
LDP Session Up (5)
LDP Same Mapping Received with different label or MTU (6)
LDP Same Mapping Received Interface Parameter matching (7)
LDP Mapping Received Inteface Parameter UnMatched(8)
LDP Mapping Received UnPass CBit Check(9)
LDP Mapping Received UnPass PW Loop Check(10)
LDP New Mapping Received (11)
LDP New Mapping Received but Remote VC Down(12)
LDP Withdrawn Received (13)
LDP Release Received (14)
LDP Request Received (15)
LDP GR End processing (16)
RSVP message received (17)
Interface Up (18)
Interface Down (19)
Interface encapsulation changed (20)
Refresh (21)
Download Again (22)
Tunnel Up (23)
Tunnel Down (24)
VC state change when New RLB Received (25)
RLB Deleted (26)
VC created or turned to another remote CE (27)
Out Interface in Invalid state (28)
Out Interface in Valid now (29)
LDP Notification Forwarding (30)
LDP Notification Not-Forwarding (31)
PW Restart (32)
Download FTN&ILM for EthernetTrunk(33)
AC OAM Fault Detect Disable(34)
Remote AC Fault(35)
Remote AC Fault Resume(36)
Local AC Fault(37)
Local AC Fault Resume(38)
Remote PSN Fault(39)
Remote PSN Fault Resume(40)
Local PSN Fault(41)
Local PSN Fault Resume(42)
BFD for PW State Change to:Down(43)
BFD for PW State Change to:Up(44)
BFD for PW State Change to:Admin Down(45)
BFD for PW Disable(46)
Manual Set Enable(47)
Manual Set Disable(48)
Delay Time Out(49)
Resume Time Out(50)
VRRP Master(51)
VRRP Backup(52)
VRRP Init(53)
VRRP Delete(54)
Track VRRP(55)
Undo track VRRP(56)
Lsp Ping Time Out(57)
VC State Down when New RLB was Received(58)
MTU Matched(59)
MTU Unmatched(60)
VSI was shuted(61)
VSI was resumed(62)
Set Admin VSI(63)
Undo set Admin VSI(64)
"
SYNTAX INTEGER
{
invalidReason(1),
vcCreated(2),
vcDeleted(3),
ldpSessionDown(4),
ldpSessionUp(5),
receivedDifLabelOrMtu(6),
receivedIntfParaMatching(7),
receivedIntfParaUnMatched(8),
receivedUnPassCbitCheck(9),
receivedUnPassPwLoopCheck(10),
receivedNewMapping(11),
receivedNewMappingButRemoteVcDown(12),
receivedWithdrawn(13),
receivedLdpRelease(14),
receivedLdpRequest(15),
ldpGrEndProcessing(16),
receivedRsvpMessage(17),
interfaceUp(18),
interfaceDown(19),
interfaceEncapChanged(20),
refresh(21),
downloadAgain(22),
tunnelUp(23),
tunnelDown(24),
receivedNewRlb(25),
deletedRlb(26),
vcCreatedOrTurnedToAnother(27),
outInterInInvalidState(28),
outInterInValidNow(29),
ldpNotifiForward(30),
ldpNotifiNotForward(31),
pwRestart(32),
downloadFtnAndIlmForEthTrunk(33),
acOamFaultDetectDisable(34),
remoteAcFault(35),
remoteAcFaultResume(36),
localAcFault(37),
localAcFaultResume(38),
remotePsnFault(39),
remotePsnFaultResume(40),
localPsnFault(41),
localPsnFaultResume(42),
bfdForPwStateChangeToDown(43),
bfdForPwStateChangeToUp(44),
bfdForPwStateChangeToAdminDown(45),
bfdForPwDisable(46),
manualSetEnable(47),
manualSetDisable(48),
delayTimeOut(49),
resumeTimeOut(50),
vrrpMaster(51),
vrrpBackup(52),
vrrpInit(53),
vrrpDelete(54),
vrrpTrack(55),
undoVrrpTrack(56),
lspPingTimeOut(57),
vcDownWhenReceivedNewRLB(58),
mtuMatched(59),
mtuUnmatched(60),
vsiShut(61),
vsiResume(62),
setAdminVSI(63),
undosetAdminVSI(64)
}
--
-- Node definitions
--
hwL2Vpn OBJECT IDENTIFIER ::= { hwDatacomm 119 }
--
-- The VPLS Attribute Group
--
hwVplsMIBObjects OBJECT IDENTIFIER ::= { hwL2VpnVplsExt 1 }
--
-- The VPLS Table
--
hwVplsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HWVplsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is the VPLS's configuration table. Users can
create or delete the VSI by it."
::= { hwVplsMIBObjects 1 }
hwVplsEntry OBJECT-TYPE
SYNTAX HWVplsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Provides the information of a VPLS entry."
INDEX { hwVplsVsiName }
::= { hwVplsTable 1 }
HWVplsEntry ::=
SEQUENCE {
hwVplsVsiName
DisplayString,
hwVplsSignal
INTEGER,
hwVplsRD
DisplayString,
hwVplsVsiID
Unsigned32,
hwVplsVcType
HWL2VpnVcEncapsType,
hwVplsStatus
INTEGER,
hwVplsMtu
Unsigned32,
hwVplsTunnelPolicy
DisplayString,
hwVplsDescription
DisplayString,
hwVplsLearnStyle
INTEGER,
hwVplsMacLearnEnable
HWEnableValue,
hwVplsMacLimitEnable
HWEnableValue,
hwVplsStatisticsEnable
HWEnableValue,
hwVplsUnknowMulticast
INTEGER,
hwVplsUnknowUnicast
INTEGER,
hwVplsPreference
Unsigned32,
hwVplsVsiType
INTEGER,
hwVplsAdminVsiName
DisplayString,
hwVplsAcIsolateFlag
HWEnableValue,
hwVplsDiffServMode
INTEGER,
hwVplsDiffServServiceClass
INTEGER,
hwVplsDiffServColor
INTEGER,
hwVplsDiffServDSName
OCTET STRING,
hwVplsInterfaceWithdraw
HWEnableValue,
hwVplsUpe2NpeWithdraw
HWEnableValue,
hwVplsUpe2UpeWithdraw
HWEnableValue,
hwVplsNpe2UpeWithdraw
HWEnableValue,
hwVplsDiscovery
INTEGER,
hwVplsMacWithdrawEnable
EnabledStatus,
hwVplsVsiCir
Unsigned32,
hwVplsVsiPir
Unsigned32,
hwVplsVsiQosProfileName
DisplayString,
hwVplsAdminStatus
INTEGER,
hwVplsIgnoreAcState
EnabledStatus,
hwVplsEnableStatistic
EnabledStatus,
hwVplsResetStatistic
INTEGER,
hwVplsResetStatisticTime
DateAndTime,
hwVplsAgingTime
Unsigned32,
hwVplsUnknowUnicastMacLearning
EnabledStatus,
hwVplsFlowLabel
EnabledStatus,
hwVplsServiceName
OCTET STRING,
hwVplsRowStatus
RowStatus
}
hwVplsVsiName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the VSI's name."
::= { hwVplsEntry 1 }
hwVplsSignal OBJECT-TYPE
SYNTAX INTEGER
{
ldp(1),
bgp(2),
unknown(255)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the signal type.
If the signal type is LDP, VSI-ID must be designated.
If the signal type is BGP, RD must be designated.
The default value is unknown(255)."
::= { hwVplsEntry 2 }
hwVplsRD OBJECT-TYPE
SYNTAX DisplayString (SIZE (0 | 3..21))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the Route Distinguisher."
::= { hwVplsEntry 3 }
hwVplsVsiID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the VSI id.
The default value is 0."
::= { hwVplsEntry 4 }
hwVplsVcType OBJECT-TYPE
SYNTAX HWL2VpnVcEncapsType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the VC's encapsulation type."
::= { hwVplsEntry 5 }
hwVplsStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2),
admindown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VPLS's status."
::= { hwVplsEntry 6 }
hwVplsMtu OBJECT-TYPE
SYNTAX Unsigned32 (328..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the VPLS's MTU.The default value is 1500."
::= { hwVplsEntry 7 }
hwVplsTunnelPolicy OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..19))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the tunnel policy."
::= { hwVplsEntry 8 }
hwVplsDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the description information."
::= { hwVplsEntry 9 }
hwVplsLearnStyle OBJECT-TYPE
SYNTAX INTEGER
{
qualify(1),
unqualify(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the style of learning the MAC
address."
::= { hwVplsEntry 10 }
hwVplsMacLearnEnable OBJECT-TYPE
SYNTAX HWEnableValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the enable sign of learning the MAC
address."
::= { hwVplsEntry 11 }
hwVplsMacLimitEnable OBJECT-TYPE
SYNTAX HWEnableValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the enable sign of the MAC addresses
number limit."
::= { hwVplsEntry 12 }
hwVplsStatisticsEnable OBJECT-TYPE
SYNTAX HWEnableValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the enable sign of statistics."
::= { hwVplsEntry 13 }
hwVplsUnknowMulticast OBJECT-TYPE
SYNTAX INTEGER
{
broadcast(1),
drop(2),
localHandle(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the processing mode when the
multicast MAC entry not found in FDB."
::= { hwVplsEntry 14 }
hwVplsUnknowUnicast OBJECT-TYPE
SYNTAX INTEGER
{
broadcast(1),
drop(2),
localHandle(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the processing mode when the
unicast MAC entry not found in FDB."
::= { hwVplsEntry 15 }
hwVplsPreference OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the preference.The default value is 0."
::= { hwVplsEntry 16 }
hwVplsVsiType OBJECT-TYPE
SYNTAX INTEGER
{
operationVsi(1),
adminVsi(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the VSI's type."
::= { hwVplsEntry 17 }
hwVplsAdminVsiName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the AdminVsi's name this VSI binding to"
::= { hwVplsEntry 18 }
hwVplsAcIsolateFlag OBJECT-TYPE
SYNTAX HWEnableValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether the AC in the VSI is isolated"
::= { hwVplsEntry 19 }
hwVplsDiffServMode OBJECT-TYPE
SYNTAX INTEGER
{
pipe(1),
shortpipe(2),
uniform(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Different service mode of the interface binding of vsi ,
default is uniform."
::= { hwVplsEntry 20 }
hwVplsDiffServServiceClass OBJECT-TYPE
SYNTAX INTEGER
{
be(1),
af1(2),
af2(3),
af3(4),
af4(5),
ef(6),
cs6(7),
cs7(8),
invalidClass(255)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"PHB in the ingress PE, the value must be
be,f1,af2,af3,af4,ef,cs6,cs7.The default value is invalidClass(255)."
::= { hwVplsEntry 21 }
hwVplsDiffServColor OBJECT-TYPE
SYNTAX INTEGER
{
green(1),
yellow(2),
red(3),
invalidColor(255)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Remarked color of packet in the ingress
PE, the value must be green,yellow,red.The default value is invalidColor(255)."
::= { hwVplsEntry 22 }
hwVplsDiffServDSName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..8))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Name of different service domain"
::= { hwVplsEntry 23 }
hwVplsInterfaceWithdraw OBJECT-TYPE
SYNTAX HWEnableValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable VSI send LDP mac-withdraw when VSI receive interface status changes event."
::= { hwVplsEntry 24 }
hwVplsUpe2NpeWithdraw OBJECT-TYPE
SYNTAX HWEnableValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VSI forward message to all the NPE when VSI receive message from UPE."
::= { hwVplsEntry 25 }
hwVplsUpe2UpeWithdraw OBJECT-TYPE
SYNTAX HWEnableValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VSI forward message to all the other UPE when VSI receive message from UPE."
::= { hwVplsEntry 26 }
hwVplsNpe2UpeWithdraw OBJECT-TYPE
SYNTAX HWEnableValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VSI forward message to all the UPE when VSI receive message from NPE."
::= { hwVplsEntry 27 }
hwVplsDiscovery OBJECT-TYPE
SYNTAX INTEGER
{
static(1),
auto(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the discovery type.
If the discovery type is static, the signal must be LDP.
If the discovery type is auto, the signal must be BGP."
::= { hwVplsEntry 28 }
hwVplsMacWithdrawEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the enable sign of the MAC address withdraw."
::= { hwVplsEntry 29 }
hwVplsVsiCir OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the committed information rate, based on VSI."
::= { hwVplsEntry 30 }
hwVplsVsiPir OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the peak information rate, based on VSI."
::= { hwVplsEntry 31 }
hwVplsVsiQosProfileName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the QoS profile's name, based on VSI."
::= { hwVplsEntry 32 }
hwVplsAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the VSI's admin status."
::= { hwVplsEntry 33 }
hwVplsIgnoreAcState OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the enable sign of the ignorer of AC state."
::= { hwVplsEntry 34 }
hwVplsEnableStatistic OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The enable sign of VSI's traffic statistics."
::= { hwVplsEntry 35 }
hwVplsResetStatistic OBJECT-TYPE
SYNTAX INTEGER
{
resetStatistic(1),
unknownStatus(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Reset traffic statistics of VSI."
::= { hwVplsEntry 36 }
hwVplsResetStatisticTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Last time of clean out."
::= { hwVplsEntry 37 }
hwVplsAgingTime OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The aging time of the VSI MAC address."
::= { hwVplsEntry 38 }
hwVplsUnknowUnicastMacLearning OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object identifies
whether the MAC address learning function for the discarded unknown unicast packets is enabled."
::= { hwVplsEntry 39 }
hwVplsFlowLabel OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object identifies whether the PW FlowLabel is enabled."
::= { hwVplsEntry 40 }
hwVplsServiceName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The service name of the VSI"
::= { hwVplsEntry 41 }
hwVplsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus for this Table.
Restriction:
After the signal type, VSI ID and RD are configured,
the configuration can not be modify or delete."
::= { hwVplsEntry 51 }
--
-- The VPLS's RT Table
--
hwVplsRtTable OBJECT-TYPE
SYNTAX SEQUENCE OF HWVplsRtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is the configuration table of VPN Target.
Users can create or delete the VPN Target of a VSI."
::= { hwVplsMIBObjects 2 }
hwVplsRtEntry OBJECT-TYPE
SYNTAX HWVplsRtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Provides the information of a RT entry."
INDEX { hwVplsVsiName, hwVplsRtType, hwVplsRtName }
::= { hwVplsRtTable 1 }
HWVplsRtEntry ::=
SEQUENCE {
hwVplsRtType
INTEGER,
hwVplsRtName
DisplayString,
hwVplsRtRowStatus
RowStatus
}
hwVplsRtType OBJECT-TYPE
SYNTAX INTEGER
{
import(1),
export(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the VC's encapsulation type."
::= { hwVplsRtEntry 1 }
hwVplsRtName OBJECT-TYPE
SYNTAX DisplayString (SIZE (3..21))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the RT."
::= { hwVplsRtEntry 2 }
hwVplsRtRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus for this Table.
The max number of entries supported is 16.
Not support modifying configuration."
::= { hwVplsRtEntry 51 }
--
-- The VPLS's AC Table
--
hwVplsAcTable OBJECT-TYPE
SYNTAX SEQUENCE OF HWVplsAcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is the configuration table of AC.
Users can create or delete the AC of a VSI."
::= { hwVplsMIBObjects 3 }
hwVplsAcEntry OBJECT-TYPE
SYNTAX HWVplsAcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Provides the information of a AC entry."
INDEX { hwVplsVsiName, hwVplsAcIfIndex }
::= { hwVplsAcTable 1 }
HWVplsAcEntry ::=
SEQUENCE {
hwVplsAcIfIndex
InterfaceIndex,
hwVplsAcStatus
INTEGER,
hwVplsAcUpStartTime
DisplayString,
hwVplsAcUpSumTime
Unsigned32,
hwVplsAcRowStatus
RowStatus
}
hwVplsAcIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the interface index.
There is only one VSI that can be created in one interface."
::= { hwVplsAcEntry 1 }
hwVplsAcStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the AC's status."
::= { hwVplsAcEntry 2 }
hwVplsAcUpStartTime OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the time this AC status has been Up(1)."
::= { hwVplsAcEntry 3 }
hwVplsAcUpSumTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the cumulate time this AC status has been Up(1)."
::= { hwVplsAcEntry 4 }
hwVplsAcRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus for this Table.
Not support modifying configuration."
::= { hwVplsAcEntry 51 }
--
-- The VPLS's BgpInfo Table
--
hwVplsBgpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF HWVplsBgpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is the configuration table of BGP information.
Users can create or delete the BgpInfo entry."
::= { hwVplsMIBObjects 4 }
hwVplsBgpInfoEntry OBJECT-TYPE
SYNTAX HWVplsBgpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Provides the information of a BgpInfo entry."
INDEX { hwVplsVsiName, hwVplsBgpInfoSiteID }
::= { hwVplsBgpInfoTable 1 }
HWVplsBgpInfoEntry ::=
SEQUENCE {
hwVplsBgpInfoSiteID
Unsigned32,
hwVplsBgpInfoRange
Unsigned32,
hwVplsBgpInfoOffset
Unsigned32,
hwVplsBgpInfoRowStatus
RowStatus
}
hwVplsBgpInfoSiteID OBJECT-TYPE
SYNTAX Unsigned32 (0..65534)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the site ID."
::= { hwVplsBgpInfoEntry 1 }
hwVplsBgpInfoRange OBJECT-TYPE
SYNTAX Unsigned32 (1..65534)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the range."
::= { hwVplsBgpInfoEntry 2 }
hwVplsBgpInfoOffset OBJECT-TYPE
SYNTAX Unsigned32 (0..1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Default original CE offset, default value is 0, calculate the VC in/out label."
::= { hwVplsBgpInfoEntry 3 }
hwVplsBgpInfoRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus for this Table.
Restriction:
Support creating only one entry currently.
Before creating, the corresponding VSI's RD and signal
type must be designated.
The signal type must be BGP.
Site can not be modified.
Range can increase, but can't decrease."
::= { hwVplsBgpInfoEntry 51 }
--
-- The VPLS's PW Table
--
hwVplsPwTable OBJECT-TYPE
SYNTAX SEQUENCE OF HWVplsPwEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is the configuration table of PW.
Users can create or delete the PW entry."
::= { hwVplsMIBObjects 5 }
hwVplsPwEntry OBJECT-TYPE
SYNTAX HWVplsPwEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Provides the information of a PW entry."
INDEX { hwVplsVsiName, hwVplsPwID, hwVplsPwRemoteIp }
::= { hwVplsPwTable 1 }
HWVplsPwEntry ::=
SEQUENCE {
hwVplsPwID
Unsigned32,
hwVplsPwRemoteIp
IpAddress,
hwVplsPwTnlPolicy
DisplayString,
hwVplsPwType
INTEGER,
hwVplsPwIsUpe
TruthValue,
hwVplsPwInboundLabel
Unsigned32,
hwVplsPwOutboundLabel
Unsigned32,
hwVplsPwStatus
INTEGER,
hwVplsPwVrIfIndex
InterfaceIndexOrZero,
hwVplsPwVrID
Unsigned32,
hwVplsPwUpStartTime
DisplayString,
hwVplsPwUpSumTime
Unsigned32,
hwVplsPwRowStatus
RowStatus
}
hwVplsPwID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the PW ID."
::= { hwVplsPwEntry 1 }
hwVplsPwRemoteIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the IP address of the remote end."
::= { hwVplsPwEntry 2 }
hwVplsPwTnlPolicy OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..19))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the tunnel policy."
::= { hwVplsPwEntry 3 }
hwVplsPwType OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
other(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the PW type."
::= { hwVplsPwEntry 4 }
hwVplsPwIsUpe OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the VPLS is UPE or not."
::= { hwVplsPwEntry 5 }
hwVplsPwInboundLabel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the inbound label."
::= { hwVplsPwEntry 6 }
hwVplsPwOutboundLabel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the outbound label."
::= { hwVplsPwEntry 7 }
hwVplsPwStatus OBJECT-TYPE
SYNTAX INTEGER
{
down(1),
up(2),
plugout(3),
backup(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the PW's status."
::= { hwVplsPwEntry 8 }
hwVplsPwVrIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VRRP interface this PW binding to."
::= { hwVplsPwEntry 9 }
hwVplsPwVrID OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VrID this PW binding to."
::= { hwVplsPwEntry 10 }
hwVplsPwUpStartTime OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the time this PW status was Up(1)."
::= { hwVplsPwEntry 11 }
hwVplsPwUpSumTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the cumulate time this PW status has been Up(1)."
::= { hwVplsPwEntry 12 }
hwVplsPwRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus for this Table.
Restriction:
Not support creating or modifying entry currently.
If the signal type is LDP, we can delete PW by deleting Peer.
If the signal type is BGP, we can delete PW by configuring RD.
If the signal type is LDP, we need import PW ID value.
If the signal type is BGP, we can import 0 as PW ID value."
::= { hwVplsPwEntry 51 }
--
-- The VPLS's Statistic Table
--
hwVplsStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HWVplsStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the VPLS's packets Statistic."
::= { hwVplsMIBObjects 6 }
hwVplsStatisticsEntry OBJECT-TYPE
SYNTAX HWVplsStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Provides the information of the VPLS's packets statistic."
INDEX { hwVplsVsiName }
::= { hwVplsStatisticsTable 1 }
HWVplsStatisticsEntry ::=
SEQUENCE {
hwVplsOutFrames
Counter64,
hwVplsInFrames
Counter64,
hwVplsOutBytes
Counter64,
hwVplsInBytes
Counter64,
hwVplsInDiscardFrames
Counter64
}
hwVplsOutFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames transmitted out of the VSI."
::= { hwVplsStatisticsEntry 1 }
hwVplsInFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames received on the VSI."
::= { hwVplsStatisticsEntry 2 }
hwVplsOutBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bytes transmitted out of the VSI."
::= { hwVplsStatisticsEntry 3 }
hwVplsInBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bytes received on the VSI."
::= { hwVplsStatisticsEntry 4 }
hwVplsInDiscardFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames received and then discarded on the VSI."
::= { hwVplsStatisticsEntry 5 }
--
-- The Leaf Nodes of hwVplsMIBObjects
--
hwVplsUpDownNotifEnable OBJECT-TYPE
SYNTAX HWEnableValue
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This object indicates the enable sign of VPLS notification.
The default value is disable (2)."
::= { hwVplsMIBObjects 7 }
hwVplsStateChangeReason OBJECT-TYPE
SYNTAX HWL2VpnStateChangeReason
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object indicates the reason of VC state change."
::= { hwVplsMIBObjects 8 }
--
-- The VPLS LDP's Statistic Table
--
hwVplsLdpStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HWVplsLdpStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the VPLS-PW's Traffic Statistic."
::= { hwVplsMIBObjects 9 }
hwVplsLdpStatisticsEntry OBJECT-TYPE
SYNTAX HWVplsLdpStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Provides the information of the VPLS-PW's Traffic Statistic."
INDEX { hwVplsVsiName, hwVplsLdpStatPwID, hwVplsLdpStatRemoteIpAddr }
::= { hwVplsLdpStatisticsTable 1 }
HWVplsLdpStatisticsEntry ::=
SEQUENCE {
hwVplsLdpStatPwID
Unsigned32,
hwVplsLdpStatRemoteIpAddr
IpAddress,
hwVplsLdpStatEnable
HWEnableValue,
hwVplsLdpStatInTrafficRate
Counter64,
hwVplsLdpStatOutTrafficRate
Counter64,
hwVplsLdpStatInFrameRate
Counter64,
hwVplsLdpStatOutFrameRate
Counter64,
hwVplsLdpStatInBytes
Counter64,
hwVplsLdpStatOutBytes
Counter64,
hwVplsLdpStatInFrames
Counter64,
hwVplsLdpStatOutFrames
Counter64,
hwVplsLdpStatInUnicastFrames
Counter64,
hwVplsLdpStatOutUnicastFrames
Counter64,
hwVplsLdpStatInMulticastFrames
Counter64,
hwVplsLdpStatOutMulticastFrames
Counter64,
hwVplsLdpStatInBroadcastFrames
Counter64,
hwVplsLdpStatOutBroadcastFrames
Counter64,
hwVplsLdpStatInDiscardFrames
Counter64,
hwVplsLdpStatOutDiscardFrames
Counter64,
hwVplsLdpStatInErrorFrames
Counter64,
hwVplsLdpStatOutErrorFrames
Counter64,
hwVplsLdpStatInUnknowFrames
Counter64,
hwVplsLdpStatResetTime
DateAndTime,
hwVplsLdpStatResetStatistic
INTEGER
}
hwVplsLdpStatPwID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the PW ID."
::= { hwVplsLdpStatisticsEntry 1 }
hwVplsLdpStatRemoteIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the IP address of the remote end."
::= { hwVplsLdpStatisticsEntry 2 }
hwVplsLdpStatEnable OBJECT-TYPE
SYNTAX HWEnableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the enable sign of LDP VPLS-PW's traffic statistics."
::= { hwVplsLdpStatisticsEntry 3 }
hwVplsLdpStatInTrafficRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The traffic rate received on the PW."
::= { hwVplsLdpStatisticsEntry 4 }
hwVplsLdpStatOutTrafficRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The traffic rate transmitted out of the PW."
::= { hwVplsLdpStatisticsEntry 5 }
hwVplsLdpStatInFrameRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate of Frames received on the PW."
::= { hwVplsLdpStatisticsEntry 6 }
hwVplsLdpStatOutFrameRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate of Frames transmitted out of the PW."
::= { hwVplsLdpStatisticsEntry 7 }
hwVplsLdpStatInBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bytes received on the PW."
::= { hwVplsLdpStatisticsEntry 8 }
hwVplsLdpStatOutBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bytes transmitted out of the PW."
::= { hwVplsLdpStatisticsEntry 9 }
hwVplsLdpStatInFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames received on the PW."
::= { hwVplsLdpStatisticsEntry 10 }
hwVplsLdpStatOutFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames transmitted out of the PW."
::= { hwVplsLdpStatisticsEntry 11 }
hwVplsLdpStatInUnicastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unicast frames received on the PW."
::= { hwVplsLdpStatisticsEntry 12 }
hwVplsLdpStatOutUnicastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unicast frames transmitted out of the PW."
::= { hwVplsLdpStatisticsEntry 13 }
hwVplsLdpStatInMulticastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of multicast frames received on the PW."
::= { hwVplsLdpStatisticsEntry 14 }
hwVplsLdpStatOutMulticastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of multicast frames transmitted out of the PW."
::= { hwVplsLdpStatisticsEntry 15 }
hwVplsLdpStatInBroadcastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of broadcast frames received on the PW."
::= { hwVplsLdpStatisticsEntry 16 }
hwVplsLdpStatOutBroadcastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of broadcast frames transmitted out of the PW."
::= { hwVplsLdpStatisticsEntry 17 }
hwVplsLdpStatInDiscardFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames received and then discarded on the PW."
::= { hwVplsLdpStatisticsEntry 18 }
hwVplsLdpStatOutDiscardFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames transmitted out and then discarded on the PW."
::= { hwVplsLdpStatisticsEntry 19 }
hwVplsLdpStatInErrorFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of error frames received on the PW."
::= { hwVplsLdpStatisticsEntry 20 }
hwVplsLdpStatOutErrorFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of error frames transmitted out of the PW."
::= { hwVplsLdpStatisticsEntry 21 }
hwVplsLdpStatInUnknowFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unknown frames received on the PW."
::= { hwVplsLdpStatisticsEntry 22 }
hwVplsLdpStatResetTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Last time of clean out."
::= { hwVplsLdpStatisticsEntry 23 }
hwVplsLdpStatResetStatistic OBJECT-TYPE
SYNTAX INTEGER
{
resetStatistic(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset traffic statistics of VSI's LDP peer."
::= { hwVplsLdpStatisticsEntry 24 }
--
-- The VPLS BGP's Statistic Table
--
hwVplsBgpStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HWVplsBgpStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the VPLS-PW's Traffic Statistic."
::= { hwVplsMIBObjects 10 }
hwVplsBgpStatisticsEntry OBJECT-TYPE
SYNTAX HWVplsBgpStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Provides the information of the VPLS-PW's Traffic Statistic."
INDEX { hwVplsVsiName, hwVplsBgpStatSiteID, hwVplsBgpStatRemoteIpAddr }
::= { hwVplsBgpStatisticsTable 1 }
HWVplsBgpStatisticsEntry ::=
SEQUENCE {
hwVplsBgpStatSiteID
Unsigned32,
hwVplsBgpStatRemoteIpAddr
IpAddress,
hwVplsBgpStatEnable
HWEnableValue,
hwVplsBgpStatInTrafficRate
Counter64,
hwVplsBgpStatOutTrafficRate
Counter64,
hwVplsBgpStatInFrameRate
Counter64,
hwVplsBgpStatOutFrameRate
Counter64,
hwVplsBgpStatInBytes
Counter64,
hwVplsBgpStatOutBytes
Counter64,
hwVplsBgpStatInFrames
Counter64,
hwVplsBgpStatOutFrames
Counter64,
hwVplsBgpStatInUnicastFrames
Counter64,
hwVplsBgpStatOutUnicastFrames
Counter64,
hwVplsBgpStatInMulticastFrames
Counter64,
hwVplsBgpStatOutMulticastFrames
Counter64,
hwVplsBgpStatInBroadcastFrames
Counter64,
hwVplsBgpStatOutBroadcastFrames
Counter64,
hwVplsBgpStatInDiscardFrames
Counter64,
hwVplsBgpStatOutDiscardFrames
Counter64,
hwVplsBgpStatInErrorFrames
Counter64,
hwVplsBgpStatOutErrorFrames
Counter64,
hwVplsBgpStatInUnknowFrames
Counter64,
hwVplsBgpStatResetTime
DateAndTime
}
hwVplsBgpStatSiteID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the Site ID."
::= { hwVplsBgpStatisticsEntry 1 }
hwVplsBgpStatRemoteIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the IP address of the remote end."
::= { hwVplsBgpStatisticsEntry 2 }
hwVplsBgpStatEnable OBJECT-TYPE
SYNTAX HWEnableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the enable sign of BGP VPLS-PW's traffic statistics."
::= { hwVplsBgpStatisticsEntry 3 }
hwVplsBgpStatInTrafficRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The traffic rate received on the PW."
::= { hwVplsBgpStatisticsEntry 4 }
hwVplsBgpStatOutTrafficRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The traffic rate transmitted out of the PW."
::= { hwVplsBgpStatisticsEntry 5 }
hwVplsBgpStatInFrameRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate of Frames received on the PW."
::= { hwVplsBgpStatisticsEntry 6 }
hwVplsBgpStatOutFrameRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate of Frames transmitted out of the PW."
::= { hwVplsBgpStatisticsEntry 7 }
hwVplsBgpStatInBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bytes received on the PW."
::= { hwVplsBgpStatisticsEntry 8 }
hwVplsBgpStatOutBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bytes transmitted out of the PW."
::= { hwVplsBgpStatisticsEntry 9 }
hwVplsBgpStatInFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames received on the PW."
::= { hwVplsBgpStatisticsEntry 10 }
hwVplsBgpStatOutFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames transmitted out of the PW."
::= { hwVplsBgpStatisticsEntry 11 }
hwVplsBgpStatInUnicastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unicast frames received on the PW."
::= { hwVplsBgpStatisticsEntry 12 }
hwVplsBgpStatOutUnicastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unicast frames transmitted out of the PW."
::= { hwVplsBgpStatisticsEntry 13 }
hwVplsBgpStatInMulticastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of multicast frames received on the PW."
::= { hwVplsBgpStatisticsEntry 14 }
hwVplsBgpStatOutMulticastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of multicast frames transmitted out of the PW."
::= { hwVplsBgpStatisticsEntry 15 }
hwVplsBgpStatInBroadcastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of broadcast frames received on the PW."
::= { hwVplsBgpStatisticsEntry 16 }
hwVplsBgpStatOutBroadcastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of broadcast frames transmitted out of the PW."
::= { hwVplsBgpStatisticsEntry 17 }
hwVplsBgpStatInDiscardFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames received and then discarded on the PW."
::= { hwVplsBgpStatisticsEntry 18 }
hwVplsBgpStatOutDiscardFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames transmitted out and then discarded on the PW."
::= { hwVplsBgpStatisticsEntry 19 }
hwVplsBgpStatInErrorFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of error frames received on the PW."
::= { hwVplsBgpStatisticsEntry 20 }
hwVplsBgpStatOutErrorFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of error frames transmitted out of the PW."
::= { hwVplsBgpStatisticsEntry 21 }
hwVplsBgpStatInUnknowFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unknown frames received on the PW."
::= { hwVplsBgpStatisticsEntry 22 }
hwVplsBgpStatResetTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Last time of clean out."
::= { hwVplsBgpStatisticsEntry 23 }
--
-- The VPLS's LDP peer Table
--
hwVplsLdpPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwVplsLdpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is the configuration table of VPLS's LDP peer.
Users can create or delete the LDP peer entry."
::= { hwVplsMIBObjects 11 }
hwVplsLdpPeerEntry OBJECT-TYPE
SYNTAX HwVplsLdpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Provides the information of a LDP peer entry."
INDEX { hwVplsVsiName, hwVplsLdpPeerRouterID, hwVplsLdpPeerPwId }
::= { hwVplsLdpPeerTable 1 }
HwVplsLdpPeerEntry ::=
SEQUENCE {
hwVplsLdpPeerRouterID
IpAddress,
hwVplsLdpPeerPwId
Unsigned32,
hwVplsLdpPeerTnlPolicyName
DisplayString,
hwVplsLdpPeerUpeType
INTEGER,
hwVplsLdpPeerTransLable
Unsigned32,
hwVplsLdpPeerRecvLable
Unsigned32,
hwVplsLdpPeerVrrpIfIndex
InterfaceIndexOrZero,
hwVplsLdpPeerVirtualRouterId
Unsigned32,
hwVplsLdpPeerCir
Unsigned32,
hwVplsLdpPeerPir
Unsigned32,
hwVplsLdpPeerQosProfileName
DisplayString,
hwVplsLdpPeerStatus
INTEGER,
hwVplsLdpPeerPwName
DisplayString,
hwVplsLdpPeerIgnoreStpLoopCheck
EnabledStatus,
hwVplsLdpPeerRowStatus
RowStatus
}
hwVplsLdpPeerRouterID OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the IP address of the LDP peer."
::= { hwVplsLdpPeerEntry 1 }
hwVplsLdpPeerPwId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the PW ID."
::= { hwVplsLdpPeerEntry 2 }
hwVplsLdpPeerTnlPolicyName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..19))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the name of tunnel policy."
::= { hwVplsLdpPeerEntry 3 }
hwVplsLdpPeerUpeType OBJECT-TYPE
SYNTAX INTEGER
{
upe(1),
staticupe(2),
unknown(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the VPLS is UPE , static UPE or not."
::= { hwVplsLdpPeerEntry 4 }
hwVplsLdpPeerTransLable OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the transmitted label."
::= { hwVplsLdpPeerEntry 5 }
hwVplsLdpPeerRecvLable OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the received label."
::= { hwVplsLdpPeerEntry 6 }
hwVplsLdpPeerVrrpIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the VRRP interface this PW binding to."
::= { hwVplsLdpPeerEntry 7 }
hwVplsLdpPeerVirtualRouterId OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the virtual router ID this PW binding to."
::= { hwVplsLdpPeerEntry 8 }
hwVplsLdpPeerCir OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the committed information rate, based on the LDP peer."
::= { hwVplsLdpPeerEntry 9 }
hwVplsLdpPeerPir OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the peak information rate, based on the LDP peer."
::= { hwVplsLdpPeerEntry 10 }
hwVplsLdpPeerQosProfileName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the QoS profile's name, based on the LDP peer."
::= { hwVplsLdpPeerEntry 11 }
hwVplsLdpPeerStatus OBJECT-TYPE
SYNTAX INTEGER
{
down(1),
up(2),
plugout(3),
backup(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the LDP peer's status."
::= { hwVplsLdpPeerEntry 12 }
hwVplsLdpPeerPwName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..15))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the name of PW."
::= { hwVplsLdpPeerEntry 13 }
hwVplsLdpPeerIgnoreStpLoopCheck OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the enable sign of the ignorer of
STP loop check."
::= { hwVplsLdpPeerEntry 14 }
hwVplsLdpPeerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status for this Table."
::= { hwVplsLdpPeerEntry 51 }
--
-- The VPLS LDP's QoS Statistic Table
--
hwVplsLdpQosStatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF HWVplsLdpQosStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the VPLS LDP's traffic statistic,
based on VSI LDP's peer and QoS."
::= { hwVplsMIBObjects 12 }
hwVplsLdpQosStatisticEntry OBJECT-TYPE
SYNTAX HWVplsLdpQosStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Provides the information of the VPLS LDP's traffic statistic."
INDEX { hwVplsVsiName, hwVplsLdpQosStatPwId, hwVplsLdpQosStatRemoteIpAddr, hwVplsLdpQosStatQueueId }
::= { hwVplsLdpQosStatisticTable 1 }
HWVplsLdpQosStatisticEntry ::=
SEQUENCE {
hwVplsLdpQosStatPwId
Unsigned32,
hwVplsLdpQosStatRemoteIpAddr
IpAddress,
hwVplsLdpQosStatQueueId
INTEGER,
hwVplsLdpQosStatTotalPassPacket
Counter64,
hwVplsLdpQosStatTotalPassByte
Counter64,
hwVplsLdpQosStatTotalDiscardPacket
Counter64,
hwVplsLdpQosStatTotalDiscardByte
Counter64,
hwVplsLdpQosStatPassPacketRate
Counter64,
hwVplsLdpQosStatPassByteRate
Counter64,
hwVplsLdpQosStatDiscardPacketRate
Counter64,
hwVplsLdpQosStatDiscardByteRate
Counter64
}
hwVplsLdpQosStatPwId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PW ID."
::= { hwVplsLdpQosStatisticEntry 1 }
hwVplsLdpQosStatRemoteIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of the remote end."
::= { hwVplsLdpQosStatisticEntry 2 }
hwVplsLdpQosStatQueueId OBJECT-TYPE
SYNTAX INTEGER
{
be(1),
af1(2),
af2(3),
af3(4),
af4(5),
ef(6),
cs6(7),
cs7(8)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The queue's ID. The value must be
be,af1,af2,af3,af4,ef,cs6,cs7."
::= { hwVplsLdpQosStatisticEntry 3 }
hwVplsLdpQosStatTotalPassPacket OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of total passed packets, based on LDP peer and QoS."
::= { hwVplsLdpQosStatisticEntry 4 }
hwVplsLdpQosStatTotalPassByte OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of total passed bytes, based on LDP peer and QoS."
::= { hwVplsLdpQosStatisticEntry 5 }
hwVplsLdpQosStatTotalDiscardPacket OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of total discarded packets, based on LDP peer and QoS."
::= { hwVplsLdpQosStatisticEntry 6 }
hwVplsLdpQosStatTotalDiscardByte OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of total discarded bytes, based on LDP peer and QoS."
::= { hwVplsLdpQosStatisticEntry 7 }
hwVplsLdpQosStatPassPacketRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rate of passed packets for the last 30 seconds,
based on LDP peer and QoS. Unit: pps"
::= { hwVplsLdpQosStatisticEntry 8 }
hwVplsLdpQosStatPassByteRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rate of passed bytes for the last 30 seconds,
based on LDP peer and QoS. Unit: bps"
::= { hwVplsLdpQosStatisticEntry 9 }
hwVplsLdpQosStatDiscardPacketRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rate of discarded packets for the last 30 seconds,
based on LDP peer and QoS. Unit: pps"
::= { hwVplsLdpQosStatisticEntry 10 }
hwVplsLdpQosStatDiscardByteRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rate of discarded bytes for the last 30 seconds,
based on LDP peer and QoS. Unit: bps"
::= { hwVplsLdpQosStatisticEntry 11 }
--
-- The VPLS's Statistic Table
--
hwVplsStatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF HWVplsStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the VPLS's traffic statistic, based on VSI."
::= { hwVplsMIBObjects 13 }
hwVplsStatisticEntry OBJECT-TYPE
SYNTAX HWVplsStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Provides the information of the VPLS's traffic statistic."
INDEX { hwVplsVsiName }
::= { hwVplsStatisticTable 1 }
HWVplsStatisticEntry ::=
SEQUENCE {
hwVplsStatEnable
EnabledStatus,
hwVplsStatResetStatistic
INTEGER,
hwVplsStatResetTime
DateAndTime,
hwVplsStatQosPacketRate
Counter64,
hwVplsStatQosByteRate
Counter64,
hwVplsStatQosPacket
Counter64,
hwVplsStatQosByte
Counter64
}
hwVplsStatEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the enable sign of VSI's traffic statistics."
::= { hwVplsStatisticEntry 1 }
hwVplsStatResetStatistic OBJECT-TYPE
SYNTAX INTEGER
{
resetStatistic(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset traffic statistics of VSI."
::= { hwVplsStatisticEntry 2 }
hwVplsStatResetTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Last time of clean out."
::= { hwVplsStatisticEntry 3 }
hwVplsStatQosPacketRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate of packets received on the VSI."
::= { hwVplsStatisticEntry 4 }
hwVplsStatQosByteRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate of bytes received on the VSI."
::= { hwVplsStatisticEntry 5 }
hwVplsStatQosPacket OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received on the VSI."
::= { hwVplsStatisticEntry 6 }
hwVplsStatQosByte OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bytes received on the VSI."
::= { hwVplsStatisticEntry 7 }
--
-- The VPLS's QoS Statistic Table
--
hwVplsQosStatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF HWVplsQosStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the VPLS's traffic statistic, based on VSI and QoS."
::= { hwVplsMIBObjects 14 }
hwVplsQosStatisticEntry OBJECT-TYPE
SYNTAX HWVplsQosStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Provides the information of the VPLS's traffic statistics."
INDEX { hwVplsVsiName, hwVplsQosStatQueueId }
::= { hwVplsQosStatisticTable 1 }
HWVplsQosStatisticEntry ::=
SEQUENCE {
hwVplsQosStatQueueId
INTEGER,
hwVplsQosStatTotalPassPacket
Counter64,
hwVplsQosStatTotalPassByte
Counter64,
hwVplsQosStatTotalDiscardPacket
Counter64,
hwVplsQosStatTotalDiscardByte
Counter64,
hwVplsQosStatPassPacketRate
Counter64,
hwVplsQosStatPassByteRate
Counter64,
hwVplsQosStatDiscardPacketRate
Counter64,
hwVplsQosStatDiscardByteRate
Counter64
}
hwVplsQosStatQueueId OBJECT-TYPE
SYNTAX INTEGER
{
be(1),
af1(2),
af2(3),
af3(4),
af4(5),
ef(6),
cs6(7),
cs7(8)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The queue's ID. The value must be
be,af1,af2,af3,af4,ef,cs6,cs7."
::= { hwVplsQosStatisticEntry 1 }
hwVplsQosStatTotalPassPacket OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of total passed packets, based on VSI and QoS."
::= { hwVplsQosStatisticEntry 2 }
hwVplsQosStatTotalPassByte OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of total passed bytes, based on VSI and QoS."
::= { hwVplsQosStatisticEntry 3 }
hwVplsQosStatTotalDiscardPacket OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of total discarded packets, based on VSI and QoS."
::= { hwVplsQosStatisticEntry 4 }
hwVplsQosStatTotalDiscardByte OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of total discarded bytes, based on VSI and QoS."
::= { hwVplsQosStatisticEntry 5 }
hwVplsQosStatPassPacketRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rate of passed packets for the last 30 seconds,
based on VSI and QoS. Unit: pps"
::= { hwVplsQosStatisticEntry 6 }
hwVplsQosStatPassByteRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rate of passed bytes for the last 30 seconds,
based on VSI and QoS. Unit: bps"
::= { hwVplsQosStatisticEntry 7 }
hwVplsQosStatDiscardPacketRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rate of discarded packets for the last 30 seconds,
based on VSI and QoS. Unit: pps"
::= { hwVplsQosStatisticEntry 8 }
hwVplsQosStatDiscardByteRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rate of discarded bytes for the last 30 seconds,
based on VSI and QoS. Unit: bps"
::= { hwVplsQosStatisticEntry 9 }
--
-- VPLS MIB Trap Definitions
--
hwVplsMIBTraps OBJECT IDENTIFIER ::= { hwL2VpnVplsExt 2 }
hwVplsVcDown NOTIFICATION-TYPE
OBJECTS { hwVplsPwType, hwVplsStateChangeReason, sysUpTime, hwVplsPwTnlPolicy }
STATUS current
DESCRIPTION
"This notification indicates the VC's state changes to down."
::= { hwVplsMIBTraps 1 }
hwVplsVcUp NOTIFICATION-TYPE
OBJECTS { hwVplsPwType, hwVplsStateChangeReason, sysUpTime, hwVplsPwTnlPolicy }
STATUS current
DESCRIPTION
"This notification indicates the VC's state changes to up."
::= { hwVplsMIBTraps 2 }
hwVplsVsiDown NOTIFICATION-TYPE
OBJECTS { hwVplsVsiID, hwVplsStateChangeReason, hwVplsStatus, ifName }
STATUS current
DESCRIPTION
"This notification indicates the VSI's state changes to down."
::= { hwVplsMIBTraps 3 }
hwVplsVsiUp NOTIFICATION-TYPE
OBJECTS { hwVplsVsiID, hwVplsStateChangeReason, hwVplsStatus, ifName }
STATUS current
DESCRIPTION
"This notification indicates the VSI's state changes to up."
::= { hwVplsMIBTraps 4 }
hwVplsVcBackup NOTIFICATION-TYPE
OBJECTS { hwVplsPwType, hwVplsStateChangeReason, sysUpTime }
STATUS current
DESCRIPTION
"This notification indicates the VC's state changes to backup."
::= { hwVplsMIBTraps 5 }
hwVplsVsiDeleted NOTIFICATION-TYPE
OBJECTS { hwVplsVsiID }
STATUS current
DESCRIPTION
"This notification indicates the VSI is deleted."
::= { hwVplsMIBTraps 6 }
hwVplsVcDeleted NOTIFICATION-TYPE
OBJECTS { hwVplsPwType }
STATUS current
DESCRIPTION
"This notification indicates the VC is deleted."
::= { hwVplsMIBTraps 7 }
-- Conformance information
--
hwVplsMIBConformance OBJECT IDENTIFIER ::= { hwL2VpnVplsExt 3 }
hwVplsMIBCompliances OBJECT IDENTIFIER ::= { hwVplsMIBConformance 1 }
-- this module
hwVplsMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for systems supporting
the HUAWEI-VPLS-EXT-MIB."
MODULE -- this module
MANDATORY-GROUPS { hwVplsGroup, hwVplsRtGroup, hwVplsAcGroup, hwVplsBgpInfoGroup, hwVplsPwGroup,
hwVplsStatisticsGroup, hwVplsNotificationControlGroup, hwVplsStateReasonGroup, hwVplsNotificationGroup,
hwVplsLdpStatisticsGroup, hwVplsBgpStatisticsGroup, hwVplsLdpPeerGroup, hwVplsLdpQosStatisticGroup,
hwVplsStatisticGroup, hwVplsQosStatisticGroup
}
::= { hwVplsMIBCompliances 1 }
hwVplsMIBGroups OBJECT IDENTIFIER ::= { hwVplsMIBConformance 2 }
hwVplsGroup OBJECT-GROUP
OBJECTS { hwVplsSignal, hwVplsRD, hwVplsVsiID, hwVplsVcType, hwVplsStatus,
hwVplsMtu, hwVplsTunnelPolicy, hwVplsDescription, hwVplsLearnStyle, hwVplsMacLearnEnable,
hwVplsMacLimitEnable, hwVplsStatisticsEnable, hwVplsUnknowMulticast, hwVplsUnknowUnicast, hwVplsPreference,
hwVplsVsiType, hwVplsAdminVsiName, hwVplsAcIsolateFlag, hwVplsDiffServMode, hwVplsDiffServServiceClass,
hwVplsDiffServColor, hwVplsDiffServDSName,hwVplsInterfaceWithdraw,hwVplsUpe2NpeWithdraw,hwVplsUpe2UpeWithdraw,
hwVplsNpe2UpeWithdraw, hwVplsDiscovery, hwVplsMacWithdrawEnable, hwVplsVsiCir, hwVplsVsiPir, hwVplsVsiQosProfileName,
hwVplsAdminStatus, hwVplsIgnoreAcState, hwVplsEnableStatistic, hwVplsResetStatistic, hwVplsResetStatisticTime,hwVplsAgingTime, hwVplsUnknowUnicastMacLearning, hwVplsFlowLabel,
hwVplsServiceName, hwVplsRowStatus
}
STATUS current
DESCRIPTION
"The VPLS group."
::= { hwVplsMIBGroups 1 }
hwVplsRtGroup OBJECT-GROUP
OBJECTS { hwVplsRtRowStatus }
STATUS current
DESCRIPTION
"The VPLS's RT group."
::= { hwVplsMIBGroups 2 }
hwVplsAcGroup OBJECT-GROUP
OBJECTS { hwVplsAcStatus, hwVplsAcUpStartTime, hwVplsAcUpSumTime, hwVplsAcRowStatus }
STATUS current
DESCRIPTION
"The VPLS's AC group."
::= { hwVplsMIBGroups 3 }
hwVplsBgpInfoGroup OBJECT-GROUP
OBJECTS { hwVplsBgpInfoRange, hwVplsBgpInfoOffset, hwVplsBgpInfoRowStatus }
STATUS current
DESCRIPTION
"The VPLS's BGP information group."
::= { hwVplsMIBGroups 4 }
hwVplsPwGroup OBJECT-GROUP
OBJECTS { hwVplsPwTnlPolicy, hwVplsPwType, hwVplsPwIsUpe, hwVplsPwInboundLabel, hwVplsPwOutboundLabel,
hwVplsPwStatus, hwVplsPwVrIfIndex, hwVplsPwVrID, hwVplsPwUpStartTime, hwVplsPwUpSumTime,
hwVplsPwRowStatus }
STATUS current
DESCRIPTION
"The VPLS's PW group."
::= { hwVplsMIBGroups 5 }
hwVplsStatisticsGroup OBJECT-GROUP
OBJECTS { hwVplsOutFrames, hwVplsInFrames, hwVplsOutBytes, hwVplsInBytes, hwVplsInDiscardFrames
}
STATUS current
DESCRIPTION
"The VPLS's Statistic group."
::= { hwVplsMIBGroups 6 }
hwVplsNotificationControlGroup OBJECT-GROUP
OBJECTS { hwVplsUpDownNotifEnable }
STATUS current
DESCRIPTION
"The VPLS's Notification Control group."
::= { hwVplsMIBGroups 7 }
hwVplsStateReasonGroup OBJECT-GROUP
OBJECTS { hwVplsStateChangeReason }
STATUS current
DESCRIPTION
"The VPLS's VC and VSI State Change Reason group."
::= { hwVplsMIBGroups 8 }
hwVplsNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwVplsVcDown, hwVplsVcUp, hwVplsVsiDown, hwVplsVsiUp, hwVplsVcBackup, hwVplsVsiDeleted, hwVplsVcDeleted
}
STATUS current
DESCRIPTION
"The VPLS Notification group."
::= { hwVplsMIBGroups 9 }
hwVplsLdpStatisticsGroup OBJECT-GROUP
OBJECTS {hwVplsLdpStatEnable,hwVplsLdpStatInTrafficRate, hwVplsLdpStatOutTrafficRate, hwVplsLdpStatInFrameRate, hwVplsLdpStatOutFrameRate, hwVplsLdpStatInBytes,
hwVplsLdpStatOutBytes, hwVplsLdpStatInFrames, hwVplsLdpStatOutFrames, hwVplsLdpStatInUnicastFrames, hwVplsLdpStatOutUnicastFrames,
hwVplsLdpStatInMulticastFrames, hwVplsLdpStatOutMulticastFrames, hwVplsLdpStatInBroadcastFrames, hwVplsLdpStatOutBroadcastFrames, hwVplsLdpStatInDiscardFrames,
hwVplsLdpStatOutDiscardFrames, hwVplsLdpStatInErrorFrames, hwVplsLdpStatOutErrorFrames, hwVplsLdpStatInUnknowFrames, hwVplsLdpStatResetTime, hwVplsLdpStatResetStatistic
}
STATUS current
DESCRIPTION
"The VPLS Ldp's Statistic group."
::= { hwVplsMIBGroups 10 }
hwVplsBgpStatisticsGroup OBJECT-GROUP
OBJECTS {hwVplsBgpStatEnable,hwVplsBgpStatInTrafficRate, hwVplsBgpStatOutTrafficRate, hwVplsBgpStatInFrameRate, hwVplsBgpStatOutFrameRate, hwVplsBgpStatInBytes,
hwVplsBgpStatOutBytes, hwVplsBgpStatInFrames, hwVplsBgpStatOutFrames, hwVplsBgpStatInUnicastFrames, hwVplsBgpStatOutUnicastFrames,
hwVplsBgpStatInMulticastFrames, hwVplsBgpStatOutMulticastFrames, hwVplsBgpStatInBroadcastFrames, hwVplsBgpStatOutBroadcastFrames, hwVplsBgpStatInDiscardFrames,
hwVplsBgpStatOutDiscardFrames, hwVplsBgpStatInErrorFrames, hwVplsBgpStatOutErrorFrames, hwVplsBgpStatInUnknowFrames, hwVplsBgpStatResetTime
}
STATUS current
DESCRIPTION
"The VPLS Bgp's Statistic group."
::= { hwVplsMIBGroups 11 }
hwVplsLdpPeerGroup OBJECT-GROUP
OBJECTS { hwVplsLdpPeerTnlPolicyName, hwVplsLdpPeerUpeType, hwVplsLdpPeerTransLable, hwVplsLdpPeerRecvLable, hwVplsLdpPeerVrrpIfIndex,
hwVplsLdpPeerVirtualRouterId, hwVplsLdpPeerCir, hwVplsLdpPeerPir, hwVplsLdpPeerQosProfileName, hwVplsLdpPeerStatus, hwVplsLdpPeerPwName,
hwVplsLdpPeerIgnoreStpLoopCheck, hwVplsLdpPeerRowStatus
}
STATUS current
DESCRIPTION
"The VPLS LDP's peer group."
::= { hwVplsMIBGroups 12 }
hwVplsLdpQosStatisticGroup OBJECT-GROUP
OBJECTS { hwVplsLdpQosStatTotalPassPacket, hwVplsLdpQosStatTotalPassByte, hwVplsLdpQosStatTotalDiscardPacket, hwVplsLdpQosStatTotalDiscardByte,
hwVplsLdpQosStatPassPacketRate, hwVplsLdpQosStatPassByteRate, hwVplsLdpQosStatDiscardPacketRate, hwVplsLdpQosStatDiscardByteRate
}
STATUS current
DESCRIPTION
"The VPLS's QoS statistic group."
::= { hwVplsMIBGroups 13 }
hwVplsStatisticGroup OBJECT-GROUP
OBJECTS { hwVplsStatEnable, hwVplsStatResetStatistic, hwVplsStatResetTime, hwVplsStatQosPacketRate, hwVplsStatQosByteRate,
hwVplsStatQosPacket, hwVplsStatQosByte
}
STATUS current
DESCRIPTION
"The VPLS's QoS statistic group."
::= { hwVplsMIBGroups 14 }
hwVplsQosStatisticGroup OBJECT-GROUP
OBJECTS { hwVplsQosStatTotalPassPacket, hwVplsQosStatTotalPassByte, hwVplsQosStatTotalDiscardPacket, hwVplsQosStatTotalDiscardByte,
hwVplsQosStatPassPacketRate, hwVplsQosStatPassByteRate, hwVplsQosStatDiscardPacketRate, hwVplsQosStatDiscardByteRate
}
STATUS current
DESCRIPTION
"The VPLS's QoS statistic group."
::= { hwVplsMIBGroups 15 }
END
--
-- HUAWEI-VPLS-EXT-MIB.mib
--