2395 lines
86 KiB
Plaintext
2395 lines
86 KiB
Plaintext
-- extracted from rfc4363.txt
|
|
-- at Tue Jan 31 06:14:58 2006
|
|
|
|
Q-BRIDGE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- -------------------------------------------------------------
|
|
-- MIB for IEEE 802.1Q Devices
|
|
-- -------------------------------------------------------------
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
Counter32, Counter64, Unsigned32, TimeTicks, Integer32
|
|
FROM SNMPv2-SMI
|
|
RowStatus, TruthValue, TEXTUAL-CONVENTION, MacAddress
|
|
FROM SNMPv2-TC
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
dot1dBridge, dot1dBasePortEntry, dot1dBasePort
|
|
FROM BRIDGE-MIB
|
|
EnabledStatus
|
|
FROM P-BRIDGE-MIB
|
|
TimeFilter
|
|
FROM RMON2-MIB;
|
|
|
|
qBridgeMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200601090000Z"
|
|
ORGANIZATION "IETF Bridge MIB Working Group"
|
|
CONTACT-INFO
|
|
"Email: Bridge-mib@ietf.org
|
|
ietfmibs@ops.ietf.org
|
|
|
|
David Levi
|
|
Postal: Nortel Networks
|
|
4655 Great America Parkway
|
|
Santa Clara, CA 95054
|
|
USA
|
|
Phone: +1 865 686 0432
|
|
Email: dlevi@nortel.com
|
|
|
|
David Harrington
|
|
Postal: Effective Software
|
|
50 Harding Rd.
|
|
Portsmouth, NH 03801
|
|
USA
|
|
Phone: +1 603 436 8634
|
|
Email: ietfdbh@comcast.net
|
|
Les Bell
|
|
Postal: Hemel Hempstead, Herts. HP2 7YU
|
|
UK
|
|
Email: elbell@ntlworld.com
|
|
|
|
Andrew Smith
|
|
Postal: Beijing Harbour Networks
|
|
Jiuling Building
|
|
21 North Xisanhuan Ave.
|
|
Beijing, 100089
|
|
PRC
|
|
Fax: +1 415 345 1827
|
|
Email: ah_smith@acm.org
|
|
|
|
Paul Langille
|
|
Postal: Newbridge Networks
|
|
5 Corporate Drive
|
|
Andover, MA 01810
|
|
USA
|
|
Phone: +1 978 691 4665
|
|
Email: langille@newbridge.com
|
|
|
|
Anil Rijhsinghani
|
|
Postal: Accton Technology Corporation
|
|
5 Mount Royal Ave
|
|
Marlboro, MA 01752
|
|
USA
|
|
Phone:
|
|
Email: anil@accton.com
|
|
|
|
Keith McCloghrie
|
|
Postal: Cisco Systems, Inc.
|
|
170 West Tasman Drive
|
|
San Jose, CA 95134-1706
|
|
USA
|
|
Phone: +1 408 526 5260
|
|
Email: kzm@cisco.com"
|
|
DESCRIPTION
|
|
"The VLAN Bridge MIB module for managing Virtual Bridged
|
|
Local Area Networks, as defined by IEEE 802.1Q-2003,
|
|
including Restricted Vlan Registration defined by
|
|
IEEE 802.1u-2001 and Vlan Classification defined by
|
|
IEEE 802.1v-2001.
|
|
|
|
Copyright (C) The Internet Society (2006). This version of
|
|
this MIB module is part of RFC 4363; See the RFC itself for
|
|
full legal notices."
|
|
REVISION "200601090000Z"
|
|
DESCRIPTION
|
|
"Added Vlan TEXTUAL-CONVENTIONs,
|
|
dot1qPortRestrictedVlanRegistration, dot1vProtocol subtree,
|
|
qBridgeClassificationDeviceGroup, qBridgePortGroup2,
|
|
qBridgeClassificationPortGroup, and qBridgeCompliance2.
|
|
Clarified dot1qForwardAllStaticPorts,
|
|
qPortAcceptableFrameTypes, and qBridgeCompliance.
|
|
Deprecated qBridgePortGroup and qBridgeCompliance."
|
|
|
|
REVISION "199908250000Z"
|
|
DESCRIPTION
|
|
"The VLAN Bridge MIB module for managing Virtual Bridged
|
|
Local Area Networks, as defined by IEEE 802.1Q-1998.
|
|
|
|
Initial version, published as RFC 2674."
|
|
|
|
::= { dot1dBridge 7 }
|
|
|
|
qBridgeMIBObjects OBJECT IDENTIFIER ::= { qBridgeMIB 1 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Textual Conventions
|
|
-- -------------------------------------------------------------
|
|
|
|
PortList ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet within this value specifies a set of eight
|
|
ports, with the first octet specifying ports 1 through
|
|
8, the second octet specifying ports 9 through 16, etc.
|
|
Within each octet, the most significant bit represents
|
|
the lowest numbered port, and the least significant bit
|
|
represents the highest numbered port. Thus, each port
|
|
of the bridge is represented by a single bit within the
|
|
value of this object. If that bit has a value of '1',
|
|
then that port is included in the set of ports; the port
|
|
is not included if its bit has a value of '0'."
|
|
SYNTAX OCTET STRING
|
|
|
|
VlanIndex ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value used to index per-VLAN tables: values of 0 and
|
|
4095 are not permitted. If the value is between 1 and
|
|
4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with
|
|
global scope within a given bridged domain (see VlanId
|
|
textual convention). If the value is greater than 4095,
|
|
then it represents a VLAN with scope local to the
|
|
particular agent, i.e., one without a global VLAN-ID
|
|
assigned to it. Such VLANs are outside the scope of
|
|
IEEE 802.1Q, but it is convenient to be able to manage them
|
|
in the same way using this MIB."
|
|
SYNTAX Unsigned32
|
|
|
|
VlanId ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN-ID that uniquely identifies a VLAN. This
|
|
is the 12-bit VLAN-ID used in the VLAN Tag header.
|
|
The range is defined by the REFERENCEd specification."
|
|
REFERENCE
|
|
"IEEE Std 802.1Q 2003 Edition, Virtual Bridged
|
|
Local Area Networks."
|
|
SYNTAX Integer32 (1..4094)
|
|
|
|
VlanIdOrAny ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN-ID that uniquely identifies a specific VLAN,
|
|
or any VLAN. The special value of 4095 is used to
|
|
indicate a wildcard, i.e., any VLAN. This can be used
|
|
in any situation where an object or table entry must
|
|
refer either to a specific VLAN or to any VLAN.
|
|
|
|
Note that a MIB object that is defined using this
|
|
TEXTUAL-CONVENTION should clarify the meaning of
|
|
'any VLAN' (i.e., the special value 4095)."
|
|
SYNTAX Integer32 (1..4094 | 4095)
|
|
|
|
VlanIdOrNone ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN-ID that uniquely identifies a specific VLAN,
|
|
or no VLAN. The special value of zero is used to
|
|
indicate that no VLAN-ID is present or used. This can
|
|
be used in any situation where an object or a table entry
|
|
must refer either to a specific VLAN, or to no VLAN.
|
|
|
|
Note that a MIB object that is defined using this
|
|
TEXTUAL-CONVENTION should clarify the meaning of
|
|
'no VLAN' (i.e., the special value 0)."
|
|
SYNTAX Integer32 (0 | 1..4094)
|
|
|
|
VlanIdOrAnyOrNone ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN-ID that uniquely identifies a specific VLAN,
|
|
any VLAN, or no VLAN. The special values 0 and 4095
|
|
have the same meaning as described in the VlanIdOrAny
|
|
and VlanIdOrNone TEXTUAL-CONVENTIONs.
|
|
|
|
Note that a MIB object that is defined using this
|
|
TEXTUAL-CONVENTION should clarify the meaning of
|
|
'any VLAN' and 'no VLAN' (i.e., the special values
|
|
0 and 4095)."
|
|
SYNTAX Integer32 (0 | 1..4094 | 4095)
|
|
|
|
-- -------------------------------------------------------------
|
|
-- subtrees in the Q-BRIDGE MIB
|
|
-- -------------------------------------------------------------
|
|
|
|
dot1qBase OBJECT IDENTIFIER ::= { qBridgeMIBObjects 1 }
|
|
dot1qTp OBJECT IDENTIFIER ::= { qBridgeMIBObjects 2 }
|
|
dot1qStatic OBJECT IDENTIFIER ::= { qBridgeMIBObjects 3 }
|
|
dot1qVlan OBJECT IDENTIFIER ::= { qBridgeMIBObjects 4 }
|
|
dot1vProtocol OBJECT IDENTIFIER ::= { qBridgeMIBObjects 5 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- dot1qBase subtree
|
|
-- -------------------------------------------------------------
|
|
|
|
dot1qVlanVersionNumber OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
version1(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version number of IEEE 802.1Q that this device
|
|
supports."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.10.1.1"
|
|
::= { dot1qBase 1 }
|
|
|
|
dot1qMaxVlanId OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum IEEE 802.1Q VLAN-ID that this device
|
|
supports."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 9.3.2.3"
|
|
::= { dot1qBase 2 }
|
|
|
|
dot1qMaxSupportedVlans OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of IEEE 802.1Q VLANs that this
|
|
device supports."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.10.1.1"
|
|
::= { dot1qBase 3 }
|
|
|
|
dot1qNumVlans OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current number of IEEE 802.1Q VLANs that are
|
|
configured in this device."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.7.1.1"
|
|
::= { dot1qBase 4 }
|
|
|
|
dot1qGvrpStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative status requested by management for
|
|
GVRP. The value enabled(1) indicates that GVRP should
|
|
be enabled on this device, on all ports for which it has
|
|
not been specifically disabled. When disabled(2), GVRP
|
|
is disabled on all ports, and all GVRP packets will be
|
|
forwarded transparently. This object affects all GVRP
|
|
Applicant and Registrar state machines. A transition
|
|
from disabled(2) to enabled(1) will cause a reset of all
|
|
GVRP state machines on all ports.
|
|
|
|
The value of this object MUST be retained across
|
|
reinitializations of the management system."
|
|
::= { dot1qBase 5 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- the dot1qTp subtree
|
|
-- -------------------------------------------------------------
|
|
|
|
-- -------------------------------------------------------------
|
|
-- the current Filtering Database Table
|
|
-- -------------------------------------------------------------
|
|
|
|
dot1qFdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1qFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains configuration and control
|
|
information for each Filtering Database currently
|
|
operating on this device. Entries in this table appear
|
|
automatically when VLANs are assigned FDB IDs in the
|
|
dot1qVlanCurrentTable."
|
|
::= { dot1qTp 1 }
|
|
|
|
dot1qFdbEntry OBJECT-TYPE
|
|
SYNTAX Dot1qFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a specific Filtering Database."
|
|
INDEX { dot1qFdbId }
|
|
::= { dot1qFdbTable 1 }
|
|
|
|
Dot1qFdbEntry ::=
|
|
SEQUENCE {
|
|
dot1qFdbId
|
|
Unsigned32,
|
|
dot1qFdbDynamicCount
|
|
Counter32
|
|
}
|
|
|
|
dot1qFdbId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The identity of this Filtering Database."
|
|
::= { dot1qFdbEntry 1 }
|
|
|
|
dot1qFdbDynamicCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current number of dynamic entries in this
|
|
Filtering Database."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.7.1.1.3"
|
|
::= { dot1qFdbEntry 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Multiple Forwarding Databases for 802.1Q Transparent Devices
|
|
-- This table is an alternative to the dot1dTpFdbTable,
|
|
-- previously defined for 802.1D devices that only support a
|
|
-- single Forwarding Database.
|
|
-- -------------------------------------------------------------
|
|
|
|
dot1qTpFdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1qTpFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information about unicast entries
|
|
for which the device has forwarding and/or filtering
|
|
information. This information is used by the
|
|
transparent bridging function in determining how to
|
|
propagate a received frame."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.7.7"
|
|
::= { dot1qTp 2 }
|
|
|
|
dot1qTpFdbEntry OBJECT-TYPE
|
|
SYNTAX Dot1qTpFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a specific unicast MAC address for
|
|
which the device has some forwarding and/or filtering
|
|
information."
|
|
INDEX { dot1qFdbId, dot1qTpFdbAddress }
|
|
::= { dot1qTpFdbTable 1 }
|
|
|
|
Dot1qTpFdbEntry ::=
|
|
SEQUENCE {
|
|
dot1qTpFdbAddress
|
|
MacAddress,
|
|
dot1qTpFdbPort
|
|
Integer32,
|
|
dot1qTpFdbStatus
|
|
INTEGER
|
|
}
|
|
|
|
dot1qTpFdbAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unicast MAC address for which the device has
|
|
forwarding and/or filtering information."
|
|
::= { dot1qTpFdbEntry 1 }
|
|
|
|
dot1qTpFdbPort OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Either the value '0', or the port number of the port on
|
|
which a frame having a source address equal to the value
|
|
of the corresponding instance of dot1qTpFdbAddress has
|
|
been seen. A value of '0' indicates that the port
|
|
number has not been learned but that the device does
|
|
have some forwarding/filtering information about this
|
|
address (e.g., in the dot1qStaticUnicastTable).
|
|
Implementors are encouraged to assign the port value to
|
|
this object whenever it is learned, even for addresses
|
|
for which the corresponding value of dot1qTpFdbStatus is
|
|
not learned(3)."
|
|
::= { dot1qTpFdbEntry 2 }
|
|
|
|
dot1qTpFdbStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
learned(3),
|
|
self(4),
|
|
mgmt(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this entry. The meanings of the values
|
|
are:
|
|
other(1) - none of the following. This may include
|
|
the case where some other MIB object (not the
|
|
corresponding instance of dot1qTpFdbPort, nor an
|
|
entry in the dot1qStaticUnicastTable) is being
|
|
used to determine if and how frames addressed to
|
|
the value of the corresponding instance of
|
|
dot1qTpFdbAddress are being forwarded.
|
|
invalid(2) - this entry is no longer valid (e.g., it
|
|
was learned but has since aged out), but has not
|
|
yet been flushed from the table.
|
|
learned(3) - the value of the corresponding instance
|
|
of dot1qTpFdbPort was learned and is being used.
|
|
self(4) - the value of the corresponding instance of
|
|
dot1qTpFdbAddress represents one of the device's
|
|
addresses. The corresponding instance of
|
|
dot1qTpFdbPort indicates which of the device's
|
|
ports has this address.
|
|
mgmt(5) - the value of the corresponding instance of
|
|
dot1qTpFdbAddress is also the value of an
|
|
existing instance of dot1qStaticAddress."
|
|
::= { dot1qTpFdbEntry 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Dynamic Group Registration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
dot1qTpGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1qTpGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing filtering information for VLANs
|
|
configured into the bridge by (local or network)
|
|
management, or learned dynamically, specifying the set of
|
|
ports to which frames received on a VLAN for this FDB
|
|
and containing a specific Group destination address are
|
|
allowed to be forwarded."
|
|
::= { dot1qTp 3 }
|
|
|
|
dot1qTpGroupEntry OBJECT-TYPE
|
|
SYNTAX Dot1qTpGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Filtering information configured into the bridge by
|
|
management, or learned dynamically, specifying the set of
|
|
ports to which frames received on a VLAN and containing
|
|
a specific Group destination address are allowed to be
|
|
forwarded. The subset of these ports learned dynamically
|
|
is also provided."
|
|
INDEX { dot1qVlanIndex, dot1qTpGroupAddress }
|
|
::= { dot1qTpGroupTable 1 }
|
|
|
|
Dot1qTpGroupEntry ::=
|
|
SEQUENCE {
|
|
dot1qTpGroupAddress
|
|
MacAddress,
|
|
dot1qTpGroupEgressPorts
|
|
PortList,
|
|
dot1qTpGroupLearnt
|
|
PortList
|
|
}
|
|
|
|
dot1qTpGroupAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination Group MAC address in a frame to which
|
|
this entry's filtering information applies."
|
|
::= { dot1qTpGroupEntry 1 }
|
|
|
|
dot1qTpGroupEgressPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The complete set of ports, in this VLAN, to which
|
|
frames destined for this Group MAC address are currently
|
|
being explicitly forwarded. This does not include ports
|
|
for which this address is only implicitly forwarded, in
|
|
the dot1qForwardAllPorts list."
|
|
::= { dot1qTpGroupEntry 2 }
|
|
|
|
dot1qTpGroupLearnt OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subset of ports in dot1qTpGroupEgressPorts that
|
|
were learned by GMRP or some other dynamic mechanism, in
|
|
this Filtering database."
|
|
::= { dot1qTpGroupEntry 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Service Requirements subtree
|
|
-- -------------------------------------------------------------
|
|
|
|
dot1qForwardAllTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1qForwardAllEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing forwarding information for each
|
|
VLAN, specifying the set of ports to which forwarding of
|
|
all multicasts applies, configured statically by
|
|
management or dynamically by GMRP. An entry appears in
|
|
this table for all VLANs that are currently
|
|
instantiated."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.7.2, 12.7.7"
|
|
::= { dot1qTp 4 }
|
|
|
|
dot1qForwardAllEntry OBJECT-TYPE
|
|
SYNTAX Dot1qForwardAllEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forwarding information for a VLAN, specifying the set
|
|
of ports to which all multicasts should be forwarded,
|
|
configured statically by management or dynamically by
|
|
GMRP."
|
|
INDEX { dot1qVlanIndex }
|
|
::= { dot1qForwardAllTable 1 }
|
|
|
|
Dot1qForwardAllEntry ::=
|
|
SEQUENCE {
|
|
dot1qForwardAllPorts
|
|
PortList,
|
|
dot1qForwardAllStaticPorts
|
|
PortList,
|
|
dot1qForwardAllForbiddenPorts
|
|
PortList
|
|
}
|
|
|
|
dot1qForwardAllPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The complete set of ports in this VLAN to which all
|
|
multicast group-addressed frames are to be forwarded.
|
|
This includes ports for which this need has been
|
|
determined dynamically by GMRP, or configured statically
|
|
by management."
|
|
::= { dot1qForwardAllEntry 1 }
|
|
|
|
dot1qForwardAllStaticPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of ports configured by management in this VLAN
|
|
to which all multicast group-addressed frames are to be
|
|
forwarded. Ports entered in this list will also appear
|
|
in the complete set shown by dot1qForwardAllPorts. This
|
|
value will be restored after the device is reset. This
|
|
only applies to ports that are members of the VLAN,
|
|
defined by dot1qVlanCurrentEgressPorts. A port may not
|
|
be added in this set if it is already a member of the
|
|
set of ports in dot1qForwardAllForbiddenPorts. The
|
|
default value is a string of ones of appropriate length,
|
|
to indicate the standard behaviour of using basic
|
|
filtering services, i.e., forward all multicasts to all
|
|
ports.
|
|
|
|
The value of this object MUST be retained across
|
|
reinitializations of the management system."
|
|
::= { dot1qForwardAllEntry 2 }
|
|
|
|
dot1qForwardAllForbiddenPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of ports configured by management in this VLAN
|
|
for which the Service Requirement attribute Forward All
|
|
Multicast Groups may not be dynamically registered by
|
|
GMRP. This value will be restored after the device is
|
|
reset. A port may not be added in this set if it is
|
|
already a member of the set of ports in
|
|
dot1qForwardAllStaticPorts. The default value is a
|
|
string of zeros of appropriate length.
|
|
|
|
The value of this object MUST be retained across
|
|
reinitializations of the management system."
|
|
::= { dot1qForwardAllEntry 3 }
|
|
|
|
dot1qForwardUnregisteredTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1qForwardUnregisteredEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing forwarding information for each
|
|
VLAN, specifying the set of ports to which forwarding of
|
|
multicast group-addressed frames for which no
|
|
more specific forwarding information applies. This is
|
|
configured statically by management and determined
|
|
dynamically by GMRP. An entry appears in this table for
|
|
all VLANs that are currently instantiated."
|
|
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.7.2, 12.7.7"
|
|
::= { dot1qTp 5 }
|
|
|
|
dot1qForwardUnregisteredEntry OBJECT-TYPE
|
|
SYNTAX Dot1qForwardUnregisteredEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forwarding information for a VLAN, specifying the set
|
|
of ports to which all multicasts for which there is no
|
|
more specific forwarding information shall be forwarded.
|
|
This is configured statically by management or
|
|
dynamically by GMRP."
|
|
INDEX { dot1qVlanIndex }
|
|
::= { dot1qForwardUnregisteredTable 1 }
|
|
|
|
Dot1qForwardUnregisteredEntry ::=
|
|
SEQUENCE {
|
|
dot1qForwardUnregisteredPorts
|
|
PortList,
|
|
dot1qForwardUnregisteredStaticPorts
|
|
PortList,
|
|
dot1qForwardUnregisteredForbiddenPorts
|
|
PortList
|
|
}
|
|
|
|
dot1qForwardUnregisteredPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The complete set of ports in this VLAN to which
|
|
multicast group-addressed frames for which there is no
|
|
more specific forwarding information will be forwarded.
|
|
This includes ports for which this need has been
|
|
determined dynamically by GMRP, or configured statically
|
|
by management."
|
|
::= { dot1qForwardUnregisteredEntry 1 }
|
|
|
|
dot1qForwardUnregisteredStaticPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of ports configured by management, in this
|
|
VLAN, to which multicast group-addressed frames for
|
|
which there is no more specific forwarding information
|
|
are to be forwarded. Ports entered in this list will
|
|
also appear in the complete set shown by
|
|
dot1qForwardUnregisteredPorts. This value will be
|
|
restored after the device is reset. A port may not be
|
|
added in this set if it is already a member of the set
|
|
of ports in dot1qForwardUnregisteredForbiddenPorts. The
|
|
default value is a string of zeros of appropriate
|
|
length, although this has no effect with the default
|
|
value of dot1qForwardAllStaticPorts.
|
|
|
|
The value of this object MUST be retained across
|
|
reinitializations of the management system."
|
|
::= { dot1qForwardUnregisteredEntry 2 }
|
|
|
|
dot1qForwardUnregisteredForbiddenPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of ports configured by management in this VLAN
|
|
for which the Service Requirement attribute Forward
|
|
Unregistered Multicast Groups may not be dynamically
|
|
registered by GMRP. This value will be restored after
|
|
the device is reset. A port may not be added in this
|
|
set if it is already a member of the set of ports in
|
|
dot1qForwardUnregisteredStaticPorts. The default value
|
|
is a string of zeros of appropriate length.
|
|
|
|
The value of this object MUST be retained across
|
|
reinitializations of the management system."
|
|
::= { dot1qForwardUnregisteredEntry 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The Static (Destination-Address Filtering) Database
|
|
-- -------------------------------------------------------------
|
|
|
|
dot1qStaticUnicastTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1qStaticUnicastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing filtering information for Unicast
|
|
MAC addresses for each Filtering Database, configured
|
|
into the device by (local or network) management
|
|
specifying the set of ports to which frames received
|
|
from specific ports and containing specific unicast
|
|
destination addresses are allowed to be forwarded. A
|
|
value of zero in this table (as the port number from
|
|
which frames with a specific destination address are
|
|
received) is used to specify all ports for which there
|
|
is no specific entry in this table for that particular
|
|
destination address. Entries are valid for unicast
|
|
addresses only."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.7.7,
|
|
ISO/IEC 15802-3 Section 7.9.1"
|
|
::= { dot1qStatic 1 }
|
|
|
|
dot1qStaticUnicastEntry OBJECT-TYPE
|
|
SYNTAX Dot1qStaticUnicastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Filtering information configured into the device by
|
|
(local or network) management specifying the set of
|
|
ports to which frames received from a specific port and
|
|
containing a specific unicast destination address are
|
|
allowed to be forwarded."
|
|
INDEX {
|
|
dot1qFdbId,
|
|
dot1qStaticUnicastAddress,
|
|
dot1qStaticUnicastReceivePort
|
|
}
|
|
::= { dot1qStaticUnicastTable 1 }
|
|
|
|
Dot1qStaticUnicastEntry ::=
|
|
SEQUENCE {
|
|
dot1qStaticUnicastAddress
|
|
MacAddress,
|
|
dot1qStaticUnicastReceivePort
|
|
Integer32,
|
|
dot1qStaticUnicastAllowedToGoTo
|
|
PortList,
|
|
dot1qStaticUnicastStatus
|
|
INTEGER
|
|
}
|
|
|
|
dot1qStaticUnicastAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination MAC address in a frame to which this
|
|
entry's filtering information applies. This object must
|
|
take the value of a unicast address."
|
|
::= { dot1qStaticUnicastEntry 1 }
|
|
|
|
dot1qStaticUnicastReceivePort OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Either the value '0' or the port number of the port
|
|
from which a frame must be received in order for this
|
|
entry's filtering information to apply. A value of zero
|
|
indicates that this entry applies on all ports of the
|
|
device for which there is no other applicable entry."
|
|
::= { dot1qStaticUnicastEntry 2 }
|
|
|
|
dot1qStaticUnicastAllowedToGoTo OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of ports for which a frame with a specific
|
|
unicast address will be flooded in the event that it
|
|
has not been learned. It also specifies the set of
|
|
ports on which a specific unicast address may be dynamically
|
|
learned. The dot1qTpFdbTable will have an equivalent
|
|
entry with a dot1qTpFdbPort value of '0' until this
|
|
address has been learned, at which point it will be updated
|
|
with the port the address has been seen on. This only
|
|
applies to ports that are members of the VLAN, defined
|
|
by dot1qVlanCurrentEgressPorts. The default value of
|
|
this object is a string of ones of appropriate length.
|
|
|
|
The value of this object MUST be retained across
|
|
reinitializations of the management system."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Table 8-5, ISO/IEC 15802-3 Table 7-5"
|
|
::= { dot1qStaticUnicastEntry 3 }
|
|
|
|
dot1qStaticUnicastStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
permanent(3),
|
|
deleteOnReset(4),
|
|
deleteOnTimeout(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry.
|
|
other(1) - this entry is currently in use, but
|
|
the conditions under which it will remain
|
|
so differ from the following values.
|
|
invalid(2) - writing this value to the object
|
|
removes the corresponding entry.
|
|
permanent(3) - this entry is currently in use
|
|
and will remain so after the next reset of
|
|
the bridge.
|
|
deleteOnReset(4) - this entry is currently in
|
|
use and will remain so until the next
|
|
reset of the bridge.
|
|
deleteOnTimeout(5) - this entry is currently in
|
|
use and will remain so until it is aged out.
|
|
|
|
The value of this object MUST be retained across
|
|
reinitializations of the management system."
|
|
DEFVAL { permanent }
|
|
::= { dot1qStaticUnicastEntry 4 }
|
|
|
|
dot1qStaticMulticastTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1qStaticMulticastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing filtering information for Multicast
|
|
and Broadcast MAC addresses for each VLAN, configured
|
|
into the device by (local or network) management
|
|
specifying the set of ports to which frames received
|
|
from specific ports and containing specific Multicast
|
|
and Broadcast destination addresses are allowed to be
|
|
forwarded. A value of zero in this table (as the port
|
|
number from which frames with a specific destination
|
|
address are received) is used to specify all ports for
|
|
which there is no specific entry in this table for that
|
|
particular destination address. Entries are valid for
|
|
Multicast and Broadcast addresses only."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.7.7,
|
|
ISO/IEC 15802-3 Section 7.9.1"
|
|
::= { dot1qStatic 2 }
|
|
|
|
dot1qStaticMulticastEntry OBJECT-TYPE
|
|
SYNTAX Dot1qStaticMulticastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Filtering information configured into the device by
|
|
(local or network) management specifying the set of
|
|
ports to which frames received from this specific port
|
|
for this VLAN and containing this Multicast or Broadcast
|
|
destination address are allowed to be forwarded."
|
|
INDEX {
|
|
dot1qVlanIndex,
|
|
dot1qStaticMulticastAddress,
|
|
dot1qStaticMulticastReceivePort
|
|
}
|
|
::= { dot1qStaticMulticastTable 1 }
|
|
|
|
Dot1qStaticMulticastEntry ::=
|
|
SEQUENCE {
|
|
dot1qStaticMulticastAddress
|
|
MacAddress,
|
|
dot1qStaticMulticastReceivePort
|
|
Integer32,
|
|
dot1qStaticMulticastStaticEgressPorts
|
|
PortList,
|
|
dot1qStaticMulticastForbiddenEgressPorts
|
|
PortList,
|
|
dot1qStaticMulticastStatus
|
|
INTEGER
|
|
}
|
|
|
|
dot1qStaticMulticastAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination MAC address in a frame to which this
|
|
entry's filtering information applies. This object must
|
|
take the value of a Multicast or Broadcast address."
|
|
::= { dot1qStaticMulticastEntry 1 }
|
|
|
|
dot1qStaticMulticastReceivePort OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Either the value '0' or the port number of the port
|
|
from which a frame must be received in order for this
|
|
entry's filtering information to apply. A value of zero
|
|
indicates that this entry applies on all ports of the
|
|
device for which there is no other applicable entry."
|
|
::= { dot1qStaticMulticastEntry 2 }
|
|
|
|
dot1qStaticMulticastStaticEgressPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of ports to which frames received from a
|
|
specific port and destined for a specific Multicast or
|
|
Broadcast MAC address must be forwarded, regardless of
|
|
any dynamic information, e.g., from GMRP. A port may not
|
|
be added in this set if it is already a member of the
|
|
set of ports in dot1qStaticMulticastForbiddenEgressPorts.
|
|
The default value of this object is a string of ones of
|
|
appropriate length.
|
|
|
|
The value of this object MUST be retained across
|
|
reinitializations of the management system."
|
|
::= { dot1qStaticMulticastEntry 3 }
|
|
|
|
dot1qStaticMulticastForbiddenEgressPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of ports to which frames received from a
|
|
specific port and destined for a specific Multicast or
|
|
Broadcast MAC address must not be forwarded, regardless
|
|
of any dynamic information, e.g., from GMRP. A port may
|
|
not be added in this set if it is already a member of the
|
|
set of ports in dot1qStaticMulticastStaticEgressPorts.
|
|
The default value of this object is a string of zeros of
|
|
appropriate length.
|
|
|
|
The value of this object MUST be retained across
|
|
reinitializations of the management system."
|
|
::= { dot1qStaticMulticastEntry 4 }
|
|
|
|
dot1qStaticMulticastStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
permanent(3),
|
|
deleteOnReset(4),
|
|
deleteOnTimeout(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry.
|
|
other(1) - this entry is currently in use, but
|
|
the conditions under which it will remain
|
|
so differ from the following values.
|
|
|
|
invalid(2) - writing this value to the object
|
|
removes the corresponding entry.
|
|
permanent(3) - this entry is currently in use
|
|
and will remain so after the next reset of
|
|
the bridge.
|
|
deleteOnReset(4) - this entry is currently in
|
|
use and will remain so until the next
|
|
reset of the bridge.
|
|
deleteOnTimeout(5) - this entry is currently in
|
|
use and will remain so until it is aged out.
|
|
|
|
The value of this object MUST be retained across
|
|
reinitializations of the management system."
|
|
DEFVAL { permanent }
|
|
::= { dot1qStaticMulticastEntry 5 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The Current VLAN Database
|
|
-- -------------------------------------------------------------
|
|
|
|
dot1qVlanNumDeletes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times a VLAN entry has been deleted from
|
|
the dot1qVlanCurrentTable (for any reason). If an entry
|
|
is deleted, then inserted, and then deleted, this
|
|
counter will be incremented by 2."
|
|
::= { dot1qVlan 1 }
|
|
|
|
dot1qVlanCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1qVlanCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing current configuration information
|
|
for each VLAN currently configured into the device by
|
|
(local or network) management, or dynamically created
|
|
as a result of GVRP requests received."
|
|
::= { dot1qVlan 2 }
|
|
|
|
dot1qVlanCurrentEntry OBJECT-TYPE
|
|
SYNTAX Dot1qVlanCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information for a VLAN configured into the device by
|
|
(local or network) management, or dynamically created
|
|
as a result of GVRP requests received."
|
|
INDEX { dot1qVlanTimeMark, dot1qVlanIndex }
|
|
::= { dot1qVlanCurrentTable 1 }
|
|
|
|
Dot1qVlanCurrentEntry ::=
|
|
SEQUENCE {
|
|
dot1qVlanTimeMark
|
|
TimeFilter,
|
|
dot1qVlanIndex
|
|
VlanIndex,
|
|
dot1qVlanFdbId
|
|
Unsigned32,
|
|
dot1qVlanCurrentEgressPorts
|
|
PortList,
|
|
dot1qVlanCurrentUntaggedPorts
|
|
PortList,
|
|
dot1qVlanStatus
|
|
INTEGER,
|
|
dot1qVlanCreationTime
|
|
TimeTicks
|
|
}
|
|
|
|
dot1qVlanTimeMark OBJECT-TYPE
|
|
SYNTAX TimeFilter
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A TimeFilter for this entry. See the TimeFilter
|
|
textual convention to see how this works."
|
|
::= { dot1qVlanCurrentEntry 1 }
|
|
|
|
dot1qVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN-ID or other identifier referring to this VLAN."
|
|
::= { dot1qVlanCurrentEntry 2 }
|
|
|
|
dot1qVlanFdbId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Filtering Database used by this VLAN. This is one
|
|
of the dot1qFdbId values in the dot1qFdbTable. This
|
|
value is allocated automatically by the device whenever
|
|
the VLAN is created: either dynamically by GVRP, or by
|
|
management, in dot1qVlanStaticTable. Allocation of this
|
|
value follows the learning constraints defined for this
|
|
VLAN in dot1qLearningConstraintsTable."
|
|
::= { dot1qVlanCurrentEntry 3 }
|
|
|
|
dot1qVlanCurrentEgressPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of ports that are transmitting traffic for
|
|
this VLAN as either tagged or untagged frames."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.10.2.1"
|
|
::= { dot1qVlanCurrentEntry 4 }
|
|
|
|
dot1qVlanCurrentUntaggedPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of ports that are transmitting traffic for
|
|
this VLAN as untagged frames."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.10.2.1"
|
|
::= { dot1qVlanCurrentEntry 5 }
|
|
|
|
dot1qVlanStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
permanent(2),
|
|
dynamicGvrp(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry.
|
|
other(1) - this entry is currently in use, but the
|
|
conditions under which it will remain so differ
|
|
from the following values.
|
|
permanent(2) - this entry, corresponding to an entry
|
|
in dot1qVlanStaticTable, is currently in use and
|
|
will remain so after the next reset of the
|
|
device. The port lists for this entry include
|
|
ports from the equivalent dot1qVlanStaticTable
|
|
entry and ports learned dynamically.
|
|
dynamicGvrp(3) - this entry is currently in use
|
|
and will remain so until removed by GVRP. There
|
|
is no static entry for this VLAN, and it will be
|
|
removed when the last port leaves the VLAN."
|
|
::= { dot1qVlanCurrentEntry 6 }
|
|
|
|
dot1qVlanCreationTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime when this VLAN was created."
|
|
::= { dot1qVlanCurrentEntry 7 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The Static VLAN Database
|
|
-- -------------------------------------------------------------
|
|
|
|
dot1qVlanStaticTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1qVlanStaticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing static configuration information for
|
|
each VLAN configured into the device by (local or
|
|
network) management. All entries are permanent and will
|
|
be restored after the device is reset."
|
|
::= { dot1qVlan 3 }
|
|
|
|
dot1qVlanStaticEntry OBJECT-TYPE
|
|
SYNTAX Dot1qVlanStaticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Static information for a VLAN configured into the
|
|
device by (local or network) management."
|
|
INDEX { dot1qVlanIndex }
|
|
::= { dot1qVlanStaticTable 1 }
|
|
|
|
Dot1qVlanStaticEntry ::=
|
|
SEQUENCE {
|
|
dot1qVlanStaticName
|
|
SnmpAdminString,
|
|
dot1qVlanStaticEgressPorts
|
|
PortList,
|
|
dot1qVlanForbiddenEgressPorts
|
|
PortList,
|
|
dot1qVlanStaticUntaggedPorts
|
|
PortList,
|
|
|
|
dot1qVlanStaticRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
dot1qVlanStaticName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An administratively assigned string, which may be used
|
|
to identify the VLAN."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.10.2.1"
|
|
::= { dot1qVlanStaticEntry 1 }
|
|
|
|
dot1qVlanStaticEgressPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of ports that are permanently assigned to the
|
|
egress list for this VLAN by management. Changes to a
|
|
bit in this object affect the per-port, per-VLAN
|
|
Registrar control for Registration Fixed for the
|
|
relevant GVRP state machine on each port. A port may
|
|
not be added in this set if it is already a member of
|
|
the set of ports in dot1qVlanForbiddenEgressPorts. The
|
|
default value of this object is a string of zeros of
|
|
appropriate length, indicating not fixed."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3"
|
|
::= { dot1qVlanStaticEntry 2 }
|
|
|
|
dot1qVlanForbiddenEgressPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of ports that are prohibited by management
|
|
from being included in the egress list for this VLAN.
|
|
Changes to this object that cause a port to be included
|
|
or excluded affect the per-port, per-VLAN Registrar
|
|
control for Registration Forbidden for the relevant GVRP
|
|
state machine on each port. A port may not be added in
|
|
this set if it is already a member of the set of ports
|
|
in dot1qVlanStaticEgressPorts. The default value of
|
|
this object is a string of zeros of appropriate length,
|
|
excluding all ports from the forbidden set."
|
|
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3"
|
|
::= { dot1qVlanStaticEntry 3 }
|
|
|
|
dot1qVlanStaticUntaggedPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of ports that should transmit egress packets
|
|
for this VLAN as untagged. The default value of this
|
|
object for the default VLAN (dot1qVlanIndex = 1) is a string
|
|
of appropriate length including all ports. There is no
|
|
specified default for other VLANs. If a device agent cannot
|
|
support the set of ports being set, then it will reject the
|
|
set operation with an error. For example, a
|
|
manager might attempt to set more than one VLAN to be untagged
|
|
on egress where the device does not support this IEEE 802.1Q
|
|
option."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.10.2.1"
|
|
::= { dot1qVlanStaticEntry 4 }
|
|
|
|
dot1qVlanStaticRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry."
|
|
::= { dot1qVlanStaticEntry 5 }
|
|
|
|
dot1qNextFreeLocalVlanIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0|4096..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The next available value for dot1qVlanIndex of a local
|
|
VLAN entry in dot1qVlanStaticTable. This will report
|
|
values >=4096 if a new Local VLAN may be created or else
|
|
the value 0 if this is not possible.
|
|
|
|
A row creation operation in this table for an entry with a local
|
|
VlanIndex value may fail if the current value of this object
|
|
is not used as the index. Even if the value read is used,
|
|
there is no guarantee that it will still be the valid index
|
|
when the create operation is attempted; another manager may
|
|
have already got in during the intervening time interval.
|
|
In this case, dot1qNextFreeLocalVlanIndex should be re-read
|
|
and the creation re-tried with the new value.
|
|
|
|
This value will automatically change when the current value is
|
|
used to create a new row."
|
|
::= { dot1qVlan 4 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The VLAN Port Configuration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
dot1qPortVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1qPortVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing per-port control and status
|
|
information for VLAN configuration in the device."
|
|
::= { dot1qVlan 5 }
|
|
|
|
dot1qPortVlanEntry OBJECT-TYPE
|
|
SYNTAX Dot1qPortVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information controlling VLAN configuration for a port
|
|
on the device. This is indexed by dot1dBasePort."
|
|
AUGMENTS { dot1dBasePortEntry }
|
|
::= { dot1qPortVlanTable 1 }
|
|
|
|
Dot1qPortVlanEntry ::=
|
|
SEQUENCE {
|
|
dot1qPvid
|
|
VlanIndex,
|
|
dot1qPortAcceptableFrameTypes
|
|
INTEGER,
|
|
dot1qPortIngressFiltering
|
|
TruthValue,
|
|
dot1qPortGvrpStatus
|
|
EnabledStatus,
|
|
dot1qPortGvrpFailedRegistrations
|
|
Counter32,
|
|
dot1qPortGvrpLastPduOrigin
|
|
MacAddress,
|
|
dot1qPortRestrictedVlanRegistration
|
|
TruthValue
|
|
}
|
|
|
|
dot1qPvid OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PVID, the VLAN-ID assigned to untagged frames or
|
|
Priority-Tagged frames received on this port.
|
|
|
|
The value of this object MUST be retained across
|
|
reinitializations of the management system."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.10.1.1"
|
|
DEFVAL { 1 }
|
|
::= { dot1qPortVlanEntry 1 }
|
|
|
|
dot1qPortAcceptableFrameTypes OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
admitAll(1),
|
|
admitOnlyVlanTagged(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When this is admitOnlyVlanTagged(2), the device will
|
|
discard untagged frames or Priority-Tagged frames
|
|
received on this port. When admitAll(1), untagged
|
|
frames or Priority-Tagged frames received on this port
|
|
will be accepted and assigned to a VID based on the
|
|
PVID and VID Set for this port.
|
|
|
|
This control does not affect VLAN-independent Bridge
|
|
Protocol Data Unit (BPDU) frames, such as GVRP and
|
|
Spanning Tree Protocol (STP). It does affect VLAN-
|
|
dependent BPDU frames, such as GMRP.
|
|
|
|
The value of this object MUST be retained across
|
|
reinitializations of the management system."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.10.1.3"
|
|
::= { dot1qPortVlanEntry 2 }
|
|
|
|
dot1qPortIngressFiltering OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When this is true(1), the device will discard incoming
|
|
frames for VLANs that do not include this Port in its
|
|
Member set. When false(2), the port will accept all
|
|
incoming frames.
|
|
|
|
This control does not affect VLAN-independent BPDU
|
|
frames, such as GVRP and STP. It does affect VLAN-
|
|
dependent BPDU frames, such as GMRP.
|
|
|
|
The value of this object MUST be retained across
|
|
reinitializations of the management system."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.10.1.4"
|
|
::= { dot1qPortVlanEntry 3 }
|
|
|
|
dot1qPortGvrpStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of GVRP operation on this port. The value
|
|
enabled(1) indicates that GVRP is enabled on this port,
|
|
as long as dot1qGvrpStatus is also enabled for this
|
|
device. When disabled(2) but dot1qGvrpStatus is still
|
|
enabled for the device, GVRP is disabled on this port:
|
|
any GVRP packets received will be silently discarded, and
|
|
no GVRP registrations will be propagated from other
|
|
ports. This object affects all GVRP Applicant and
|
|
Registrar state machines on this port. A transition
|
|
from disabled(2) to enabled(1) will cause a reset of all
|
|
GVRP state machines on this port.
|
|
|
|
The value of this object MUST be retained across
|
|
reinitializations of the management system."
|
|
::= { dot1qPortVlanEntry 4 }
|
|
|
|
dot1qPortGvrpFailedRegistrations OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of failed GVRP registrations, for any
|
|
reason, on this port."
|
|
::= { dot1qPortVlanEntry 5 }
|
|
|
|
dot1qPortGvrpLastPduOrigin OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Source MAC Address of the last GVRP message
|
|
received on this port."
|
|
::= { dot1qPortVlanEntry 6 }
|
|
|
|
dot1qPortRestrictedVlanRegistration OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of Restricted VLAN Registration on this port.
|
|
If the value of this control is true(1), then creation
|
|
of a new dynamic VLAN entry is permitted only if there
|
|
is a Static VLAN Registration Entry for the VLAN concerned,
|
|
in which the Registrar Administrative Control value for
|
|
this port is Normal Registration.
|
|
|
|
The value of this object MUST be retained across
|
|
reinitializations of the management system."
|
|
REFERENCE
|
|
"IEEE 802.1u clause 11.2.3.2.3, 12.10.1.7."
|
|
DEFVAL { false }
|
|
::= { dot1qPortVlanEntry 7 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Per port VLAN Statistics Table
|
|
-- -------------------------------------------------------------
|
|
|
|
dot1qPortVlanStatisticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1qPortVlanStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing per-port, per-VLAN statistics for
|
|
traffic received. Separate objects are provided for both the
|
|
most-significant and least-significant bits of statistics
|
|
counters for ports that are associated with this transparent
|
|
bridge. The most-significant bit objects are only required on
|
|
high-capacity interfaces, as defined in the conformance clauses
|
|
for these objects. This mechanism is provided as a way to read
|
|
64-bit counters for agents that support only SNMPv1.
|
|
|
|
Note that the reporting of most-significant and least-
|
|
significant counter bits separately runs the risk of missing
|
|
an overflow of the lower bits in the interval between sampling.
|
|
The manager must be aware of this possibility, even within the
|
|
same varbindlist, when interpreting the results of a request or
|
|
asynchronous notification."
|
|
::= { dot1qVlan 6 }
|
|
|
|
dot1qPortVlanStatisticsEntry OBJECT-TYPE
|
|
SYNTAX Dot1qPortVlanStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Traffic statistics for a VLAN on an interface."
|
|
INDEX { dot1dBasePort, dot1qVlanIndex }
|
|
::= { dot1qPortVlanStatisticsTable 1 }
|
|
|
|
Dot1qPortVlanStatisticsEntry ::=
|
|
SEQUENCE {
|
|
dot1qTpVlanPortInFrames
|
|
Counter32,
|
|
dot1qTpVlanPortOutFrames
|
|
Counter32,
|
|
dot1qTpVlanPortInDiscards
|
|
Counter32,
|
|
dot1qTpVlanPortInOverflowFrames
|
|
Counter32,
|
|
dot1qTpVlanPortOutOverflowFrames
|
|
Counter32,
|
|
dot1qTpVlanPortInOverflowDiscards
|
|
Counter32
|
|
}
|
|
|
|
dot1qTpVlanPortInFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of valid frames received by this port from
|
|
its segment that were classified as belonging to this
|
|
VLAN. Note that a frame received on this port is
|
|
counted by this object if and only if it is for a
|
|
protocol being processed by the local forwarding process
|
|
for this VLAN. This object includes received bridge
|
|
management frames classified as belonging to this VLAN
|
|
(e.g., GMRP, but not GVRP or STP."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.6.1.1.3(a)"
|
|
::= { dot1qPortVlanStatisticsEntry 1 }
|
|
|
|
dot1qTpVlanPortOutFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of valid frames transmitted by this port to
|
|
its segment from the local forwarding process for this
|
|
VLAN. This includes bridge management frames originated
|
|
by this device that are classified as belonging to this
|
|
VLAN (e.g., GMRP, but not GVRP or STP)."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.6.1.1.3(d)"
|
|
::= { dot1qPortVlanStatisticsEntry 2 }
|
|
|
|
dot1qTpVlanPortInDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of valid frames received by this port from
|
|
its segment that were classified as belonging to this
|
|
VLAN and that were discarded due to VLAN-related reasons.
|
|
Specifically, the IEEE 802.1Q counters for Discard
|
|
Inbound and Discard on Ingress Filtering."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.6.1.1.3"
|
|
::= { dot1qPortVlanStatisticsEntry 3 }
|
|
|
|
dot1qTpVlanPortInOverflowFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the associated
|
|
dot1qTpVlanPortInFrames counter has overflowed."
|
|
REFERENCE
|
|
"ISO/IEC 15802-3 Section 14.6.1.1.3"
|
|
::= { dot1qPortVlanStatisticsEntry 4 }
|
|
|
|
dot1qTpVlanPortOutOverflowFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the associated
|
|
dot1qTpVlanPortOutFrames counter has overflowed."
|
|
REFERENCE
|
|
"ISO/IEC 15802-3 Section 14.6.1.1.3"
|
|
::= { dot1qPortVlanStatisticsEntry 5 }
|
|
|
|
dot1qTpVlanPortInOverflowDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the associated
|
|
dot1qTpVlanPortInDiscards counter has overflowed."
|
|
REFERENCE
|
|
"ISO/IEC 15802-3 Section 14.6.1.1.3"
|
|
::= { dot1qPortVlanStatisticsEntry 6 }
|
|
|
|
dot1qPortVlanHCStatisticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1qPortVlanHCStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing per-port, per-VLAN statistics for
|
|
traffic on high-capacity interfaces."
|
|
::= { dot1qVlan 7 }
|
|
|
|
dot1qPortVlanHCStatisticsEntry OBJECT-TYPE
|
|
SYNTAX Dot1qPortVlanHCStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Traffic statistics for a VLAN on a high-capacity
|
|
interface."
|
|
INDEX { dot1dBasePort, dot1qVlanIndex }
|
|
::= { dot1qPortVlanHCStatisticsTable 1 }
|
|
|
|
Dot1qPortVlanHCStatisticsEntry ::=
|
|
SEQUENCE {
|
|
dot1qTpVlanPortHCInFrames
|
|
Counter64,
|
|
dot1qTpVlanPortHCOutFrames
|
|
Counter64,
|
|
dot1qTpVlanPortHCInDiscards
|
|
Counter64
|
|
}
|
|
|
|
dot1qTpVlanPortHCInFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of valid frames received by this port from
|
|
its segment that were classified as belonging to this
|
|
VLAN. Note that a frame received on this port is
|
|
counted by this object if and only if it is for a
|
|
protocol being processed by the local forwarding process
|
|
for this VLAN. This object includes received bridge
|
|
management frames classified as belonging to this VLAN
|
|
(e.g., GMRP, but not GVRP or STP)."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.6.1.1.3(a)"
|
|
::= { dot1qPortVlanHCStatisticsEntry 1 }
|
|
|
|
dot1qTpVlanPortHCOutFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of valid frames transmitted by this port to
|
|
its segment from the local forwarding process for this
|
|
VLAN. This includes bridge management frames originated
|
|
by this device that are classified as belonging to this
|
|
VLAN (e.g., GMRP, but not GVRP or STP)."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.6.1.1.3(d)"
|
|
::= { dot1qPortVlanHCStatisticsEntry 2 }
|
|
|
|
dot1qTpVlanPortHCInDiscards OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of valid frames received by this port from
|
|
its segment that were classified as belonging to this
|
|
VLAN and that were discarded due to VLAN-related reasons.
|
|
Specifically, the IEEE 802.1Q counters for Discard
|
|
Inbound and Discard on Ingress Filtering."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.6.1.1.3"
|
|
::= { dot1qPortVlanHCStatisticsEntry 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The VLAN Learning Constraints Table
|
|
-- -------------------------------------------------------------
|
|
|
|
dot1qLearningConstraintsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1qLearningConstraintsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing learning constraints for sets of
|
|
Shared and Independent VLANs."
|
|
REFERENCE
|
|
"IEEE 802.1Q/D11 Section 12.10.3.1"
|
|
::= { dot1qVlan 8 }
|
|
|
|
dot1qLearningConstraintsEntry OBJECT-TYPE
|
|
SYNTAX Dot1qLearningConstraintsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A learning constraint defined for a VLAN."
|
|
INDEX { dot1qConstraintVlan, dot1qConstraintSet }
|
|
::= { dot1qLearningConstraintsTable 1 }
|
|
|
|
Dot1qLearningConstraintsEntry ::=
|
|
SEQUENCE {
|
|
dot1qConstraintVlan
|
|
VlanIndex,
|
|
dot1qConstraintSet
|
|
Integer32,
|
|
dot1qConstraintType
|
|
INTEGER,
|
|
dot1qConstraintStatus
|
|
RowStatus
|
|
}
|
|
|
|
dot1qConstraintVlan OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the row in dot1qVlanCurrentTable for the
|
|
VLAN constrained by this entry."
|
|
::= { dot1qLearningConstraintsEntry 1 }
|
|
|
|
dot1qConstraintSet OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The identity of the constraint set to which
|
|
dot1qConstraintVlan belongs. These values may be chosen
|
|
by the management station."
|
|
::= { dot1qLearningConstraintsEntry 2 }
|
|
|
|
dot1qConstraintType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
independent(1),
|
|
shared(2)
|
|
}
|
|
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of constraint this entry defines.
|
|
independent(1) - the VLAN, dot1qConstraintVlan,
|
|
uses a filtering database independent from all
|
|
other VLANs in the same set, defined by
|
|
dot1qConstraintSet.
|
|
shared(2) - the VLAN, dot1qConstraintVlan, shares
|
|
the same filtering database as all other VLANs
|
|
in the same set, defined by dot1qConstraintSet."
|
|
::= { dot1qLearningConstraintsEntry 3 }
|
|
|
|
dot1qConstraintStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this entry."
|
|
::= { dot1qLearningConstraintsEntry 4 }
|
|
|
|
dot1qConstraintSetDefault OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The identity of the constraint set to which a VLAN
|
|
belongs, if there is not an explicit entry for that VLAN
|
|
in dot1qLearningConstraintsTable.
|
|
|
|
The value of this object MUST be retained across
|
|
reinitializations of the management system."
|
|
::= { dot1qVlan 9 }
|
|
|
|
dot1qConstraintTypeDefault OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
independent(1),
|
|
shared(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of constraint set to which a VLAN belongs, if
|
|
there is not an explicit entry for that VLAN in
|
|
dot1qLearningConstraintsTable. The types are as defined
|
|
for dot1qConstraintType.
|
|
|
|
The value of this object MUST be retained across
|
|
reinitializations of the management system."
|
|
::= { dot1qVlan 10 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- dot1vProtocol subtree
|
|
-- -------------------------------------------------------------
|
|
|
|
dot1vProtocolGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1vProtocolGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains mappings from Protocol
|
|
Templates to Protocol Group Identifiers used for
|
|
Port-and-Protocol-based VLAN Classification."
|
|
REFERENCE
|
|
"IEEE 802.1v clause 8.6.4"
|
|
::= { dot1vProtocol 1 }
|
|
|
|
dot1vProtocolGroupEntry OBJECT-TYPE
|
|
SYNTAX Dot1vProtocolGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A mapping from a Protocol Template to a Protocol
|
|
Group Identifier."
|
|
INDEX { dot1vProtocolTemplateFrameType,
|
|
dot1vProtocolTemplateProtocolValue }
|
|
::= { dot1vProtocolGroupTable 1 }
|
|
|
|
Dot1vProtocolGroupEntry ::=
|
|
SEQUENCE {
|
|
dot1vProtocolTemplateFrameType
|
|
INTEGER,
|
|
dot1vProtocolTemplateProtocolValue
|
|
OCTET STRING,
|
|
dot1vProtocolGroupId
|
|
Integer32,
|
|
dot1vProtocolGroupRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
dot1vProtocolTemplateFrameType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ethernet (1),
|
|
rfc1042 (2),
|
|
snap8021H (3),
|
|
snapOther (4),
|
|
llcOther (5)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The data-link encapsulation format or the
|
|
'detagged_frame_type' in a Protocol Template."
|
|
REFERENCE
|
|
"IEEE 802.1v clause 8.6.2"
|
|
::= { dot1vProtocolGroupEntry 1 }
|
|
|
|
dot1vProtocolTemplateProtocolValue OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2 | 5))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The identification of the protocol above the data-link
|
|
layer in a Protocol Template. Depending on the
|
|
frame type, the octet string will have one of the
|
|
following values:
|
|
|
|
For 'ethernet', 'rfc1042' and 'snap8021H',
|
|
this is the 16-bit (2-octet) IEEE 802.3 Type Field.
|
|
For 'snapOther',
|
|
this is the 40-bit (5-octet) PID.
|
|
For 'llcOther',
|
|
this is the 2-octet IEEE 802.2 Link Service Access
|
|
Point (LSAP) pair: first octet for Destination Service
|
|
Access Point (DSAP) and second octet for Source Service
|
|
Access Point (SSAP)."
|
|
REFERENCE
|
|
"IEEE 802.1v clause 8.6.2"
|
|
::= { dot1vProtocolGroupEntry 2 }
|
|
|
|
dot1vProtocolGroupId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents a group of protocols that are associated
|
|
together when assigning a VID to a frame."
|
|
REFERENCE
|
|
"IEEE 802.1v clause 8.6.3, 12.10.2.1"
|
|
::= { dot1vProtocolGroupEntry 3 }
|
|
|
|
dot1vProtocolGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry."
|
|
::= { dot1vProtocolGroupEntry 4 }
|
|
|
|
dot1vProtocolPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1vProtocolPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains VID sets used for
|
|
Port-and-Protocol-based VLAN Classification."
|
|
REFERENCE
|
|
"IEEE 802.1v clause 8.4.4"
|
|
::= { dot1vProtocol 2 }
|
|
|
|
dot1vProtocolPortEntry OBJECT-TYPE
|
|
SYNTAX Dot1vProtocolPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A VID set for a port."
|
|
INDEX { dot1dBasePort,
|
|
dot1vProtocolPortGroupId }
|
|
::= { dot1vProtocolPortTable 1 }
|
|
|
|
Dot1vProtocolPortEntry ::=
|
|
SEQUENCE {
|
|
dot1vProtocolPortGroupId
|
|
Integer32,
|
|
dot1vProtocolPortGroupVid
|
|
Integer32,
|
|
dot1vProtocolPortRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
dot1vProtocolPortGroupId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Designates a group of protocols in the Protocol
|
|
Group Database."
|
|
REFERENCE
|
|
"IEEE 802.1v clause 8.6.3, 12.10.1.2"
|
|
::= { dot1vProtocolPortEntry 1 }
|
|
|
|
dot1vProtocolPortGroupVid OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VID associated with a group of protocols for
|
|
each port."
|
|
REFERENCE
|
|
"IEEE 802.1v clause 8.4.4, 12.10.1.2"
|
|
::= { dot1vProtocolPortEntry 2 }
|
|
|
|
dot1vProtocolPortRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry."
|
|
::= { dot1vProtocolPortEntry 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- IEEE 802.1Q MIB - Conformance Information
|
|
-- -------------------------------------------------------------
|
|
|
|
qBridgeConformance OBJECT IDENTIFIER ::= { qBridgeMIB 2 }
|
|
|
|
qBridgeGroups OBJECT IDENTIFIER ::= { qBridgeConformance 1 }
|
|
|
|
qBridgeCompliances OBJECT IDENTIFIER ::= { qBridgeConformance 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- units of conformance
|
|
-- -------------------------------------------------------------
|
|
|
|
qBridgeBaseGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1qVlanVersionNumber,
|
|
dot1qMaxVlanId,
|
|
dot1qMaxSupportedVlans,
|
|
dot1qNumVlans,
|
|
dot1qGvrpStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing device-level control
|
|
and status information for the Virtual LAN bridge
|
|
services."
|
|
::= { qBridgeGroups 1 }
|
|
|
|
qBridgeFdbUnicastGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1qFdbDynamicCount,
|
|
dot1qTpFdbPort,
|
|
dot1qTpFdbStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information about all
|
|
unicast addresses, learned dynamically or statically
|
|
configured by management, in each Filtering Database."
|
|
::= { qBridgeGroups 2 }
|
|
|
|
qBridgeFdbMulticastGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1qTpGroupEgressPorts,
|
|
dot1qTpGroupLearnt
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information about all
|
|
multicast addresses, learned dynamically or statically
|
|
configured by management, in each Filtering Database."
|
|
::= { qBridgeGroups 3 }
|
|
|
|
qBridgeServiceRequirementsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1qForwardAllPorts,
|
|
dot1qForwardAllStaticPorts,
|
|
dot1qForwardAllForbiddenPorts,
|
|
dot1qForwardUnregisteredPorts,
|
|
dot1qForwardUnregisteredStaticPorts,
|
|
dot1qForwardUnregisteredForbiddenPorts
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information about
|
|
service requirements, learned dynamically or statically
|
|
configured by management, in each Filtering Database."
|
|
::= { qBridgeGroups 4 }
|
|
|
|
qBridgeFdbStaticGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1qStaticUnicastAllowedToGoTo,
|
|
dot1qStaticUnicastStatus,
|
|
dot1qStaticMulticastStaticEgressPorts,
|
|
dot1qStaticMulticastForbiddenEgressPorts,
|
|
dot1qStaticMulticastStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information about
|
|
unicast and multicast addresses statically configured by
|
|
management, in each Filtering Database or VLAN."
|
|
::= { qBridgeGroups 5 }
|
|
|
|
qBridgeVlanGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1qVlanNumDeletes,
|
|
dot1qVlanFdbId,
|
|
dot1qVlanCurrentEgressPorts,
|
|
dot1qVlanCurrentUntaggedPorts,
|
|
dot1qVlanStatus,
|
|
dot1qVlanCreationTime
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information about
|
|
all VLANs currently configured on this device."
|
|
::= { qBridgeGroups 6 }
|
|
|
|
qBridgeVlanStaticGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1qVlanStaticName,
|
|
dot1qVlanStaticEgressPorts,
|
|
dot1qVlanForbiddenEgressPorts,
|
|
dot1qVlanStaticUntaggedPorts,
|
|
dot1qVlanStaticRowStatus,
|
|
dot1qNextFreeLocalVlanIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information about
|
|
VLANs statically configured by management."
|
|
::= { qBridgeGroups 7 }
|
|
|
|
qBridgePortGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1qPvid,
|
|
dot1qPortAcceptableFrameTypes,
|
|
dot1qPortIngressFiltering,
|
|
dot1qPortGvrpStatus,
|
|
dot1qPortGvrpFailedRegistrations,
|
|
dot1qPortGvrpLastPduOrigin
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of objects providing port-level VLAN
|
|
control and status information for all ports."
|
|
::= { qBridgeGroups 8 }
|
|
|
|
qBridgeVlanStatisticsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1qTpVlanPortInFrames,
|
|
dot1qTpVlanPortOutFrames,
|
|
dot1qTpVlanPortInDiscards
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing per-port packet
|
|
statistics for all VLANs currently configured on this
|
|
device."
|
|
::= { qBridgeGroups 9 }
|
|
|
|
qBridgeVlanStatisticsOverflowGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1qTpVlanPortInOverflowFrames,
|
|
dot1qTpVlanPortOutOverflowFrames,
|
|
dot1qTpVlanPortInOverflowDiscards
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing overflow counters for
|
|
per-port packet statistics for all VLANs currently configured
|
|
on this device for high-capacity interfaces, defined as those
|
|
that have the value of the corresponding instance of
|
|
ifSpeed greater than 650,000,000 bits/second."
|
|
::= { qBridgeGroups 10 }
|
|
|
|
qBridgeVlanHCStatisticsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1qTpVlanPortHCInFrames,
|
|
dot1qTpVlanPortHCOutFrames,
|
|
dot1qTpVlanPortHCInDiscards
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing per-port packet
|
|
statistics for all VLANs currently configured on this
|
|
device for high-capacity interfaces, defined as those
|
|
that have the value of the corresponding instance of
|
|
ifSpeed greater than 650,000,000 bits/second."
|
|
::= { qBridgeGroups 11 }
|
|
|
|
qBridgeLearningConstraintsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1qConstraintType,
|
|
dot1qConstraintStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects defining the Filtering Database
|
|
constraints all VLANs have with each other."
|
|
::= { qBridgeGroups 12 }
|
|
|
|
qBridgeLearningConstraintDefaultGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1qConstraintSetDefault,
|
|
dot1qConstraintTypeDefault
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects defining the default Filtering
|
|
Database constraints for VLANs that have no specific
|
|
constraints defined."
|
|
::= { qBridgeGroups 13 }
|
|
|
|
qBridgeClassificationDeviceGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1vProtocolGroupId,
|
|
dot1vProtocolGroupRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN classification information for the bridge."
|
|
::= { qBridgeGroups 14 }
|
|
|
|
qBridgeClassificationPortGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1vProtocolPortGroupVid,
|
|
dot1vProtocolPortRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN classification information for individual ports."
|
|
::= { qBridgeGroups 15 }
|
|
|
|
qBridgePortGroup2 OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1qPvid,
|
|
dot1qPortAcceptableFrameTypes,
|
|
dot1qPortIngressFiltering,
|
|
dot1qPortGvrpStatus,
|
|
dot1qPortGvrpFailedRegistrations,
|
|
dot1qPortGvrpLastPduOrigin,
|
|
dot1qPortRestrictedVlanRegistration
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing port-level VLAN
|
|
control and status information for all ports."
|
|
::= { qBridgeGroups 16 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- compliance statements
|
|
-- -------------------------------------------------------------
|
|
|
|
qBridgeCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for device support of Virtual
|
|
LAN Bridge services.
|
|
|
|
RFC2674 was silent about the expected persistence of the
|
|
read-write objects in this MIB module. Applications MUST
|
|
NOT assume that the values of the read-write objects are
|
|
persistent across reinitializations of the management
|
|
system and MUST NOT assume that the values are not
|
|
persistent across reinitializations of the management
|
|
system."
|
|
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
qBridgeBaseGroup,
|
|
qBridgeVlanGroup,
|
|
qBridgeVlanStaticGroup,
|
|
qBridgePortGroup
|
|
}
|
|
|
|
GROUP qBridgeFdbUnicastGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for bridges that implement
|
|
802.1Q transparent bridging."
|
|
|
|
GROUP qBridgeFdbMulticastGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for bridges that implement
|
|
802.1Q transparent bridging."
|
|
|
|
GROUP qBridgeServiceRequirementsGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for bridges that implement
|
|
extended filtering services. All objects must be
|
|
read-write if extended-filtering services are
|
|
enabled."
|
|
|
|
GROUP qBridgeFdbStaticGroup
|
|
DESCRIPTION
|
|
"This group is optional."
|
|
|
|
GROUP qBridgeVlanStatisticsGroup
|
|
DESCRIPTION
|
|
"This group is optional as there may be significant
|
|
implementation cost associated with its support."
|
|
|
|
GROUP qBridgeVlanStatisticsOverflowGroup
|
|
DESCRIPTION
|
|
"This group is optional as there may be significant
|
|
implementation cost associated with its support. It is most
|
|
relevant for high-capacity interfaces where the SNMP agent
|
|
supports only SNMPv1."
|
|
|
|
GROUP qBridgeVlanHCStatisticsGroup
|
|
DESCRIPTION
|
|
"This group is optional as there may be significant
|
|
implementation cost associated with its support. It is most
|
|
relevant for high-capacity interfaces."
|
|
|
|
GROUP qBridgeLearningConstraintsGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices implementing
|
|
both Independent VLAN Learning (IVL) and Shared
|
|
VLAN Learning (SVL) modes of operation of the
|
|
filtering database, as defined by IEEE 802.1Q."
|
|
|
|
GROUP qBridgeLearningConstraintDefaultGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices implementing
|
|
both Independent VLAN Learning (IVL) and Shared
|
|
VLAN Learning (SVL) modes of operation of the
|
|
filtering database, as defined by IEEE 802.1Q."
|
|
|
|
OBJECT dot1qPortAcceptableFrameTypes
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required as this is an optional
|
|
capability in IEEE 802.1Q."
|
|
|
|
OBJECT dot1qPortIngressFiltering
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required as this is an optional
|
|
capability in IEEE 802.1Q."
|
|
|
|
OBJECT dot1qConstraintSetDefault
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required as this is an optional
|
|
capability in IEEE 802.1Q."
|
|
|
|
OBJECT dot1qConstraintTypeDefault
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required as this is an optional
|
|
capability in IEEE 802.1Q."
|
|
|
|
::= { qBridgeCompliances 1 }
|
|
|
|
qBridgeCompliance2 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for device support of Virtual
|
|
LAN Bridge services.
|
|
|
|
This document clarifies the persistence requirements for
|
|
the read-write objects in this MIB module. All
|
|
implementations claiming compliance to qBridgeCompliance2
|
|
MUST retain the values of those read-write objects that
|
|
specify this requirement."
|
|
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
qBridgeBaseGroup,
|
|
qBridgeVlanGroup,
|
|
qBridgeVlanStaticGroup,
|
|
qBridgePortGroup2
|
|
}
|
|
|
|
GROUP qBridgeFdbUnicastGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for bridges that implement
|
|
802.1Q transparent bridging."
|
|
|
|
GROUP qBridgeFdbMulticastGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for bridges that implement
|
|
802.1Q transparent bridging."
|
|
|
|
GROUP qBridgeServiceRequirementsGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for bridges that implement
|
|
extended filtering services. All objects must be
|
|
read-write if extended-filtering services are
|
|
enabled."
|
|
|
|
GROUP qBridgeFdbStaticGroup
|
|
DESCRIPTION
|
|
"This group is optional."
|
|
|
|
GROUP qBridgeVlanStatisticsGroup
|
|
DESCRIPTION
|
|
"This group is optional as there may be significant
|
|
implementation cost associated with its support."
|
|
|
|
GROUP qBridgeVlanStatisticsOverflowGroup
|
|
DESCRIPTION
|
|
"This group is optional as there may be significant
|
|
implementation cost associated with its support. It is most
|
|
relevant for high-capacity interfaces where the SNMP agent
|
|
supports only SNMPv1."
|
|
|
|
GROUP qBridgeVlanHCStatisticsGroup
|
|
DESCRIPTION
|
|
"This group is optional as there may be significant
|
|
implementation cost associated with its support. It is most
|
|
relevant for high-capacity interfaces."
|
|
|
|
GROUP qBridgeLearningConstraintsGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices implementing
|
|
both Independent VLAN Learning (IVL) and Shared
|
|
VLAN Learning (SVL) modes of operation of the
|
|
filtering database, as defined by IEEE 802.1Q."
|
|
|
|
GROUP qBridgeLearningConstraintDefaultGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices implementing
|
|
both Independent VLAN Learning (IVL) and Shared
|
|
VLAN Learning (SVL) modes of operation of the
|
|
filtering database, as defined by IEEE 802.1Q."
|
|
|
|
GROUP qBridgeClassificationDeviceGroup
|
|
DESCRIPTION
|
|
"This group is mandatory ONLY for devices implementing
|
|
VLAN Classification as specified in IEEE 802.1v."
|
|
|
|
GROUP qBridgeClassificationPortGroup
|
|
DESCRIPTION
|
|
"This group is mandatory ONLY for devices implementing
|
|
VLAN Classification as specified in IEEE 802.1v."
|
|
|
|
OBJECT dot1qPortAcceptableFrameTypes
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required as this is an optional
|
|
capability in IEEE 802.1Q."
|
|
|
|
OBJECT dot1qPortIngressFiltering
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required as this is an optional
|
|
capability in IEEE 802.1Q."
|
|
|
|
OBJECT dot1qConstraintSetDefault
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required as this is an optional
|
|
capability in IEEE 802.1Q."
|
|
|
|
OBJECT dot1qConstraintTypeDefault
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required as this is an optional
|
|
capability in IEEE 802.1Q."
|
|
|
|
OBJECT dot1vProtocolGroupId
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required as this is an optional
|
|
capability in IEEE 802.1v."
|
|
|
|
OBJECT dot1vProtocolGroupRowStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required as this is an optional
|
|
capability in IEEE 802.1v."
|
|
|
|
::= { qBridgeCompliances 2 }
|
|
|
|
END
|
|
|
|
--
|
|
-- Copyright (C) The Internet Society (2006).
|
|
--
|
|
-- This document is subject to the rights, licenses and restrictions
|
|
-- contained in BCP 78, and except as set forth therein, the authors
|
|
-- retain all their rights.
|
|
--
|
|
-- This document and the information contained herein are provided on an
|
|
-- "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
|
|
-- OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
|
|
-- ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
|
|
-- INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
|
|
-- INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
|
|
-- WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
|
|
--
|
|
-- Intellectual Property
|
|
--
|
|
-- The IETF takes no position regarding the validity or scope of any
|
|
-- Intellectual Property Rights or other rights that might be claimed to
|
|
-- pertain to the implementation or use of the technology described in
|
|
-- this document or the extent to which any license under such rights
|
|
-- might or might not be available; nor does it represent that it has
|
|
-- made any independent effort to identify any such rights. Information
|
|
-- on the procedures with respect to rights in RFC documents can be
|
|
-- found in BCP 78 and BCP 79.
|
|
--
|
|
-- Copies of IPR disclosures made to the IETF Secretariat and any
|
|
-- assurances of licenses to be made available, or the result of an
|
|
-- attempt made to obtain a general license or permission for the use of
|
|
-- such proprietary rights by implementers or users of this
|
|
-- specification can be obtained from the IETF on-line IPR repository at
|
|
-- http://www.ietf.org/ipr.
|
|
--
|
|
-- The IETF invites any interested party to bring to its attention any
|
|
-- copyrights, patents or patent applications, or other proprietary
|
|
-- rights that may cover technology that may be required to implement
|
|
-- this standard. Please address the information to the IETF at
|
|
-- ietf-ipr@ietf.org.
|
|
--
|
|
|