compass-core/mibs/HUAWEI-IMA-MIB.mib

895 lines
29 KiB
Plaintext

-- =================================================================
-- Copyright (C) 2007 by HUAWEI TECHNOLOGIES. All rights reserved.
--
-- Description: HUAWEI Private IMA Interface MIB
-- Version: V1.0
-- History:
-- V1.0
-- ==================================================================
-- ==================================================================
--
-- Variables and types be imported
--
-- ==================================================================
HUAWEI-IMA-MIB DEFINITIONS ::= BEGIN
IMPORTS
hwDatacomm
FROM HUAWEI-MIB
NOTIFICATION-TYPE, enterprises,
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Gauge32
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION, DateAndTime, RowStatus
FROM SNMPv2-TC
InterfaceIndex, InterfaceIndexOrZero, ifIndex
FROM IF-MIB;
-- February 10,2009 at 14:00 GMT
-- February 10,2009 at 14:00 GMT
hwImaMIB MODULE-IDENTITY
LAST-UPDATED "200902101400Z" -- February 10,2009 at 14:00 GMT
ORGANIZATION
"Huawei Technologies co.,Ltd."
CONTACT-INFO
"Huawei Technologies co.,Ltd.
Huawei Bld.,NO.3 Xinxi Rd.,
Shang-Di Information Industry Base,
Hai-Dian District Beijing P.R. China
http://www.huawei.com
Zip:100085
"
DESCRIPTION
"The MIB is mainly used to configure Inverse Multiplexing
for ATM (IMA) interfaces."
::= { hwDatacomm 176 }
-- The object identifier subtree for the HUAWEI-IMA-MIB.
hwImaMibObjects OBJECT IDENTIFIER ::= { hwImaMIB 1 }
hwImaMibConformance OBJECT IDENTIFIER ::= { hwImaMIB 2 }
hwImaNotifications OBJECT IDENTIFIER ::= { hwImaMIB 3 }
-- Textual conventions
MilliSeconds ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Time in milliseconds"
SYNTAX Integer32
ImaGroupState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"State of the IMA group."
SYNTAX INTEGER {
notConfigured(1),
startUp(2),
startUpAck(3),
configAbortUnsupportedM(4),
configAbortIncompatibleSymmetry(5),
configAbortOther(6),
insufficientLinks(7),
blocked(8),
operational(9),
configAbortUnsupportedImaVersion(10)
}
ImaGroupSymmetry ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The group symmetry mode adjusted during the group start-up."
SYNTAX INTEGER {
symmetricOperation(1),
asymmetricOperation(2),
asymmetricConfiguration(3)
}
ImaFrameLength ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Length of the IMA frames."
SYNTAX INTEGER {
m32(1),
m64(2),
m128(3),
m256(4)
}
ImaLinkState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"State of a link belonging to an IMA group."
SYNTAX INTEGER {
notInGroup(1),
unusableNoGivenReason(2),
unusableFault(3),
unusableMisconnected(4),
unusableInhibited(5),
unusableFailed(6),
usable(7),
active(8)
}
--
-- The IMA Group subtree
--
-- The IMA Group subtree consists of the number of IMA groups and a
-- table of IMA groups. Each entry in the table of IMA groups contains
-- information (configuration and status) specific to each group.
--
hwImaGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF HWImaGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IMA Group Configuration table."
::= { hwImaMibObjects 1 }
hwImaGroupEntry OBJECT-TYPE
SYNTAX HWImaGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the IMA Group table."
INDEX { hwImaGroupIfIndex }
::= { hwImaGroupTable 1 }
HWImaGroupEntry ::= SEQUENCE {
hwImaGroupIfIndex InterfaceIndex,
hwImaGroupNeState ImaGroupState,
hwImaGroupFeState ImaGroupState,
hwImaGroupSymmetry ImaGroupSymmetry,
hwImaGroupMinNumTxLinks Integer32 (1..32),
hwImaGroupMinNumRxLinks Integer32 (1..32),
hwImaGroupTxTimingRefLink InterfaceIndexOrZero,
hwImaGroupRxTimingRefLink InterfaceIndexOrZero,
hwImaGroupTxImaId Integer32 (0..255),
hwImaGroupRxImaId Integer32 (0..255),
hwImaGroupTxFrameLength ImaFrameLength,
hwImaGroupRxFrameLength ImaFrameLength,
hwImaGroupDiffDelayMax MilliSeconds,
hwImaGroupAlphaValue Integer32 (1..2),
hwImaGroupBetaValue Integer32 (1..5),
hwImaGroupGammaValue Integer32 (1..5),
hwImaGroupNumTxActLinks Gauge32,
hwImaGroupNumRxActLinks Gauge32,
hwImaGroupTxOamLabelValue Integer32 (1..255),
hwImaGroupRxOamLabelValue Integer32 (0..255),
hwImaGroupFirstLinkIfIndex InterfaceIndex,
hwImaGroupName OCTET STRING
}
hwImaGroupIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the logical interface number ('ifIndex')
assigned to this IMA group, and is used to identify corresponding
rows in the Interfaces MIB.
Note that re-initialization of the management agent may cause
a client's 'hwImaGroupIfIndex' to change."
::= { hwImaGroupEntry 1 }
hwImaGroupNeState OBJECT-TYPE
SYNTAX ImaGroupState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the near-end IMA Group State
Machine."
::= { hwImaGroupEntry 2 }
hwImaGroupFeState OBJECT-TYPE
SYNTAX ImaGroupState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the far-end IMA Group State
Machine."
::= { hwImaGroupEntry 3 }
hwImaGroupSymmetry OBJECT-TYPE
SYNTAX ImaGroupSymmetry
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Symmetry of the IMA group."
::= { hwImaGroupEntry 4 }
hwImaGroupMinNumTxLinks OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum number of transmit links required to be Active for
the IMA group to be in the Operational state."
::= { hwImaGroupEntry 5 }
hwImaGroupMinNumRxLinks OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum number of receive links required to be Active for
the IMA group to be in the Operational state."
::= { hwImaGroupEntry 6 }
hwImaGroupTxTimingRefLink OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex of the transmit timing reference link to be
used by the near-end for IMA data cell clock recovery from
the ATM layer. The distinguished value of zero may be used
if no link has been configured in the IMA group, or if the
transmit timing reference link has not yet been selected."
::= { hwImaGroupEntry 7 }
hwImaGroupRxTimingRefLink OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex of the receive timing reference link to be
used by near-end for IMA data cell clock recovery toward
the ATM layer. The distinguished value of zero may be used
if no link has been configured in the IMA group, or if the
receive timing reference link has not yet been detected."
::= { hwImaGroupEntry 8 }
hwImaGroupTxImaId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IMA ID currently in use by the near-end IMA function."
::= { hwImaGroupEntry 9 }
hwImaGroupRxImaId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IMA ID currently in use by the far-end IMA function."
::= { hwImaGroupEntry 10 }
hwImaGroupTxFrameLength OBJECT-TYPE
SYNTAX ImaFrameLength
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The frame length to be used by the IMA group in the transmit
direction. Can only be set when the IMA group is startup."
::= { hwImaGroupEntry 11 }
hwImaGroupRxFrameLength OBJECT-TYPE
SYNTAX ImaFrameLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of IMA frame length as received from remote IMA function."
::= { hwImaGroupEntry 12 }
hwImaGroupDiffDelayMax OBJECT-TYPE
SYNTAX MilliSeconds (25..120)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of milliseconds of differential delay among
the links that will be tolerated on this interface."
::= { hwImaGroupEntry 13 }
hwImaGroupAlphaValue OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the 'alpha' value used to specify the number
of consecutive invalid ICP cells to be detected before moving
to the IMA Hunt state from the IMA Sync state."
::= { hwImaGroupEntry 14 }
hwImaGroupBetaValue OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the 'beta' value used to specify the number
of consecutive errored ICP cells to be detected before moving
to the IMA Hunt state from the IMA Sync state."
::= { hwImaGroupEntry 15 }
hwImaGroupGammaValue OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the 'gamma' value used to specify the number
of consecutive valid ICP cells to be detected before moving
to the IMA Sync state from the IMA PreSync state."
::= { hwImaGroupEntry 16 }
-- hwImaGroupNumTxActLinks is used by a network operator to tell how many
-- links which are configured for transmit are also Active.
hwImaGroupNumTxActLinks OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of links which are configured to transmit and are
currently Active in this IMA group."
::= { hwImaGroupEntry 17 }
-- hwImaGroupNumRxActLinks is used by a network operator to tell how many
-- links which are configured for receive are also Active.
hwImaGroupNumRxActLinks OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of links which are configured to receive and are
currently Active in this IMA group."
::= { hwImaGroupEntry 18 }
--
-- Objects to report the IMA OAM Label values transmitted and
-- received by the IMA group.
--
hwImaGroupTxOamLabelValue OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IMA OAM Label value transmitted by the NE IMA unit."
::= { hwImaGroupEntry 19 }
hwImaGroupRxOamLabelValue OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IMA OAM Label value transmitted by the FE IMA unit. The value 0
likely means that the IMA unit has not received an OAM Label
from the FE IMA unit at this time."
::= { hwImaGroupEntry 20 }
hwImaGroupFirstLinkIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the first link of this IMA Group."
::= { hwImaGroupEntry 21 }
-- 1.3.6.1.4.1.2011.5.25.176.1.1.1.22
hwImaGroupName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The name of interface ImaGroup."
::= { hwImaGroupEntry 22 }
--
-- The IMA Link subtree
--
-- The IMA Link subtree consists of a table of IMA links. Each entry
-- in the table contains status information about a link which is part
-- of an IMA group, and also contains a configuration object to select
-- to which IMA group the link belongs.
--
hwImaLinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF HWImaLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IMA group Link Status and Configuration table."
::= { hwImaMibObjects 2 }
hwImaLinkEntry OBJECT-TYPE
SYNTAX HWImaLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the IMA Group Link table."
INDEX { hwImaLinkIfIndex }
::= { hwImaLinkTable 1 }
HWImaLinkEntry ::= SEQUENCE {
hwImaLinkIfIndex InterfaceIndex,
hwImaLinkGroupIfIndex InterfaceIndex,
hwImaLinkNeTxState ImaLinkState,
hwImaLinkNeRxState ImaLinkState,
hwImaLinkFeTxState ImaLinkState,
hwImaLinkFeRxState ImaLinkState,
hwImaLinkRowStatus RowStatus,
hwImaLinkName OCTET STRING
}
hwImaLinkIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This corresponds to the 'ifIndex' of the MIB-II interface
on which this link is established. This object also
corresponds to the logical number ('ifIndex') assigned to
this IMA link."
::= { hwImaLinkEntry 1 }
hwImaLinkGroupIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the logical interface number ('ifIndex')
assigned to this IMA group. The specified link will be bound to
this IMA group."
::= { hwImaLinkEntry 2 }
hwImaLinkNeTxState OBJECT-TYPE
SYNTAX ImaLinkState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the near-end transmit link."
::= { hwImaLinkEntry 3 }
hwImaLinkNeRxState OBJECT-TYPE
SYNTAX ImaLinkState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the near-end receive link."
::= { hwImaLinkEntry 4 }
hwImaLinkFeTxState OBJECT-TYPE
SYNTAX ImaLinkState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the far-end transmit link as reported
via ICP cells."
::= { hwImaLinkEntry 5 }
hwImaLinkFeRxState OBJECT-TYPE
SYNTAX ImaLinkState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the far-end receive link as reported
via ICP cells."
::= { hwImaLinkEntry 6 }
hwImaLinkRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The hwImaLinkRowStatus object allows create, change, and delete
operations on hwImaLinkTable entries.
To create a new conceptual row (or instance) of the hwImaLinkTable,
hwImaLinkRowStatus must be set to 'createAndWait' or 'createAndGo'.
A successful set of the imaLinkGroupIndex object must be performed
before the hwImaLinkRowStatus of a new conceptual row can be set to
'active'.
To change (modify) the imaLinkGroupIndex in an hwImaLinkTable entry,
the hwImaLinkRowStatus object must first be set to 'notInService'.
Only then can this object in the conceptual row be modified.
This is due to the fact that the imaLinkGroupIndex object provides
the association between a physical IMA link and the IMA group to
which it belongs, and setting the imaLinkGroupIndex object to a
different value has the effect of changing the association between
a physical IMA link and an IMA group. To place the link 'in group',
the hwImaLinkRowStatus object is set to 'active'. While the row is
not in 'active' state, both the Transmit and Receive IMA link state
machines are in the 'Not In Group' state.
To remove (delete) an hwImaLinkTable entry from this table, set
this object to 'destroy'."
::= { hwImaLinkEntry 51 }
-- 1.3.6.1.4.1.2011.5.25.176.1.2.1.52
hwImaLinkName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Description."
::= { hwImaLinkEntry 52 }
-- 1.3.6.1.4.1.2011.5.25.176.1.3
hwImaAlarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwImaAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { hwImaMibObjects 3 }
-- 1.3.6.1.4.1.2011.5.25.176.1.3.1
hwImaAlarmEntry OBJECT-TYPE
SYNTAX HwImaAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { hwImaAlarmIfIndex }
::= { hwImaAlarmTable 1 }
HwImaAlarmEntry ::=
SEQUENCE {
hwImaAlarmIfIndex
Integer32,
hwImaGroupNeDownEn
Integer32,
hwImaGroupFeDownEn
Integer32,
hwImaGroupTxClkMismatchEn
Integer32,
hwImaLinkLifEn
Integer32,
hwImaLinkLodsEn
Integer32,
hwImaLinkRfiEn
Integer32,
hwImaLinkFeTxUnusableEn
Integer32,
hwImaLinkFeRxUnusableEn
Integer32,
hwIMAAllEn
Integer32
}
-- 1.3.6.1.4.1.2011.5.25.176.1.3.1.1
hwImaAlarmIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { hwImaAlarmEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.176.1.3.1.2
hwImaGroupNeDownEn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { hwImaAlarmEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.176.1.3.1.3
hwImaGroupFeDownEn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { hwImaAlarmEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.176.1.3.1.4
hwImaGroupTxClkMismatchEn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { hwImaAlarmEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.176.1.3.1.5
hwImaLinkLifEn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { hwImaAlarmEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.176.1.3.1.6
hwImaLinkLodsEn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { hwImaAlarmEntry 6 }
-- 1.3.6.1.4.1.2011.5.25.176.1.3.1.7
hwImaLinkRfiEn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { hwImaAlarmEntry 7 }
-- 1.3.6.1.4.1.2011.5.25.176.1.3.1.8
hwImaLinkFeTxUnusableEn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { hwImaAlarmEntry 8 }
-- 1.3.6.1.4.1.2011.5.25.176.1.3.1.9
hwImaLinkFeRxUnusableEn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { hwImaAlarmEntry 9 }
-- 1.3.6.1.4.1.2011.5.25.176.1.3.1.10
hwIMAAllEn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { hwImaAlarmEntry 10 }
-- Conformance Information
hwImaMibGroups OBJECT IDENTIFIER ::= { hwImaMibConformance 1 }
hwImaMibCompliances OBJECT IDENTIFIER ::= { hwImaMibConformance 2 }
-- Compliance Statements
hwImaMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for network elements implementing
Inverse Multiplexing for ATM (IMA) interfaces."
MODULE -- this module
-- Mandatory Part
MANDATORY-GROUPS {
hwImaGroupGroup,
hwImaLinkGroup
}
-- Compliance Part
OBJECT hwImaGroupMinNumTxLinks
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT hwImaGroupMinNumRxLinks
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT hwImaGroupTxFrameLength
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT hwImaGroupDiffDelayMax
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { hwImaMibCompliances 1 }
-- Units of Conformance
hwImaGroupGroup OBJECT-GROUP
OBJECTS {
hwImaGroupIfIndex,
hwImaGroupNeState,
hwImaGroupFeState,
hwImaGroupSymmetry,
hwImaGroupMinNumTxLinks,
hwImaGroupMinNumRxLinks,
hwImaGroupTxTimingRefLink,
hwImaGroupRxTimingRefLink,
hwImaGroupTxImaId,
hwImaGroupRxImaId,
hwImaGroupTxFrameLength,
hwImaGroupRxFrameLength,
hwImaGroupDiffDelayMax,
hwImaGroupAlphaValue,
hwImaGroupBetaValue,
hwImaGroupGammaValue,
hwImaGroupNumTxActLinks,
hwImaGroupNumRxActLinks,
hwImaGroupTxOamLabelValue,
hwImaGroupRxOamLabelValue,
hwImaGroupFirstLinkIfIndex
}
STATUS current
DESCRIPTION
"A set of objects providing configuration and status information for
an IMA group definition."
::= { hwImaMibGroups 1 }
hwImaLinkGroup OBJECT-GROUP
OBJECTS {
hwImaLinkGroupIfIndex,
hwImaLinkNeTxState,
hwImaLinkNeRxState,
hwImaLinkFeTxState,
hwImaLinkFeRxState,
hwImaLinkRowStatus
}
STATUS current
DESCRIPTION
"A set of objects providing status information for an IMA link."
::= { hwImaMibGroups 2 }
-- 1.3.6.1.4.1.2011.5.25.176.3.1
hwImaGroupNeDownAlarm NOTIFICATION-TYPE
OBJECTS { hwImaGroupName }
STATUS current
DESCRIPTION
"Description."
::= { hwImaNotifications 1 }
-- 1.3.6.1.4.1.2011.5.25.176.3.2
hwImaGroupNeDownAlarmResume NOTIFICATION-TYPE
OBJECTS { hwImaGroupName }
STATUS current
DESCRIPTION
"Description."
::= { hwImaNotifications 2 }
-- 1.3.6.1.4.1.2011.5.25.176.3.3
hwImaGroupFeDownAlarm NOTIFICATION-TYPE
OBJECTS { hwImaGroupName }
STATUS current
DESCRIPTION
"Description."
::= { hwImaNotifications 3 }
-- 1.3.6.1.4.1.2011.5.25.176.3.4
hwImaGroupFeDownAlarmResume NOTIFICATION-TYPE
OBJECTS { hwImaGroupName }
STATUS current
DESCRIPTION
"Description."
::= { hwImaNotifications 4 }
-- 1.3.6.1.4.1.2011.5.25.176.3.5
hwImaGroupTxClkMismatch NOTIFICATION-TYPE
OBJECTS { hwImaGroupName }
STATUS current
DESCRIPTION
"Description."
::= { hwImaNotifications 5 }
-- 1.3.6.1.4.1.2011.5.25.176.3.6
hwImaGroupTxClkMismatchResume NOTIFICATION-TYPE
OBJECTS { hwImaGroupName }
STATUS current
DESCRIPTION
"Description."
::= { hwImaNotifications 6 }
-- 1.3.6.1.4.1.2011.5.25.176.3.7
hwImaLinkLifAlarm NOTIFICATION-TYPE
OBJECTS { hwImaLinkName }
STATUS current
DESCRIPTION
"Description."
::= { hwImaNotifications 7 }
-- 1.3.6.1.4.1.2011.5.25.176.3.8
hwImaLinkLifAlarmResume NOTIFICATION-TYPE
OBJECTS { hwImaLinkName }
STATUS current
DESCRIPTION
"Description."
::= { hwImaNotifications 8 }
-- 1.3.6.1.4.1.2011.5.25.176.3.9
hwImaLinkLodsAlarm NOTIFICATION-TYPE
OBJECTS { hwImaLinkName }
STATUS current
DESCRIPTION
"Description."
::= { hwImaNotifications 9 }
-- 1.3.6.1.4.1.2011.5.25.176.3.10
hwImaLinkLodsAlarmResume NOTIFICATION-TYPE
OBJECTS { hwImaLinkName }
STATUS current
DESCRIPTION
"Description."
::= { hwImaNotifications 10 }
-- 1.3.6.1.4.1.2011.5.25.176.3.11
hwImaLinkRfiAlarm NOTIFICATION-TYPE
OBJECTS { hwImaLinkName }
STATUS current
DESCRIPTION
"Description."
::= { hwImaNotifications 11 }
-- 1.3.6.1.4.1.2011.5.25.176.3.12
hwImaLinkRfiAlarmResume NOTIFICATION-TYPE
OBJECTS { hwImaLinkName }
STATUS current
DESCRIPTION
"Description."
::= { hwImaNotifications 12 }
-- 1.3.6.1.4.1.2011.5.25.176.3.13
hwImaLinkFeTxUnusableAlarm NOTIFICATION-TYPE
OBJECTS { hwImaLinkName }
STATUS current
DESCRIPTION
"Description."
::= { hwImaNotifications 13 }
-- 1.3.6.1.4.1.2011.5.25.176.3.14
hwImaLinkFeTxUnusableAlarmResume NOTIFICATION-TYPE
OBJECTS { hwImaLinkName }
STATUS current
DESCRIPTION
"Description."
::= { hwImaNotifications 14 }
-- 1.3.6.1.4.1.2011.5.25.176.3.15
hwImaLinkFeRxUnusableAlarm NOTIFICATION-TYPE
OBJECTS { hwImaLinkName }
STATUS current
DESCRIPTION
"Description."
::= { hwImaNotifications 15 }
-- 1.3.6.1.4.1.2011.5.25.176.3.16
hwImaLinkFeRxUnusableAlarmResume NOTIFICATION-TYPE
OBJECTS { hwImaLinkName }
STATUS current
DESCRIPTION
"Description."
::= { hwImaNotifications 16 }
END
--
-- HUAWEI-IMA-MIB.mib
--