compass-core/mibs/HUAWEI-VGMP-MIB.mib

807 lines
40 KiB
Plaintext

-- =================================================================
-- Copyright (C) 2002 by HUAWEI TECHNOLOGIES. All rights reserved.
--
-- Description: HUAWEI-VGMP-MIB mib
-- Reference: This mib describes VRRP Group Management Protocol.
-- Version: V1.0
-- History:
--
-- =====================DEFINITIONS============================================
HUAWEI-VGMP-MIB DEFINITIONS ::= BEGIN
IMPORTS
hwDatacomm
FROM HUAWEI-MIB
OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
Integer32, Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
RowStatus, TEXTUAL-CONVENTION,TimeStamp
FROM SNMPv2-TC
InterfaceIndex
FROM IF-MIB;
hwVgmpMib MODULE-IDENTITY
LAST-UPDATED "200701112100Z" -- January 11, 2007 at 21:00 GMT
ORGANIZATION
"Huawei Technologies co., Ltd."
CONTACT-INFO
" R&D Nanjing, Huawei Technologies co.,Ltd.
Huihong Bld.,NO.91 Baixia Rd.,
Bai-Xia District Nanjing P.R. China
Zip:210001
Http://www.huawei.com
E-mail:support@huawei.com "
DESCRIPTION
"This mib is used for VGMP."
REVISION "200701112100Z" -- January 11, 2007 at 21:00 GMT
DESCRIPTION
"The initial revision of this MIB module."
::= { hwDatacomm 122 }
-- =====================DEFINITIONS============================================
-- =====================TrapSnmpCtrl============================================
vgmpGlobalCtrl OBJECT IDENTIFIER ::= { hwVgmpMib 0 }
hwVgmpTrapSnmpCtrl OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A switch decides whether the system sends trap info or not. The default value is disabled."
::= { vgmpGlobalCtrl 1 }
hwVgmpStrictCheck OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A switch decides whether the system carries out strict check or not. The default value is disabled."
::= { vgmpGlobalCtrl 2 }
-- =====================TrapSnmpCtrl============================================
-- ================== Vgmp notification ===================================
vgmpNotifications OBJECT IDENTIFIER ::= { hwVgmpMib 1 }
hwVgmpOtherStateToMaster NOTIFICATION-TYPE
OBJECTS { hwVgmpGroupCfgState,hwVgmpGroupCfgNextState }
STATUS current
DESCRIPTION
"The status of the vrrp-group turns to master."
::= { vgmpNotifications 1 }
hwVgmpMasterToOtherState NOTIFICATION-TYPE
OBJECTS { hwVgmpGroupCfgState,hwVgmpGroupCfgNextState }
STATUS current
DESCRIPTION
"The status of the vrrp-group changes from master to other state."
::= { vgmpNotifications 2 }
-- ================== Vgmp notification end ===================================
vgmpOperations OBJECT IDENTIFIER ::= { hwVgmpMib 2 }
vgmpStatistics OBJECT IDENTIFIER ::= { hwVgmpMib 3 }
vgmpConformance OBJECT IDENTIFIER ::= { hwVgmpMib 4 }
-- ================== VGMP configuration table ==================
hwVgmpGroupCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF HWVgmpGroupCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vrrp-group configuration table. "
::= { vgmpOperations 1 }
hwVgmpGroupCfgEntry OBJECT-TYPE
SYNTAX HWVgmpGroupCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vrrp-group configuration table."
INDEX { hwVgmpGroupCfgID }
::= { hwVgmpGroupCfgTable 1 }
HWVgmpGroupCfgEntry ::=
SEQUENCE {
hwVgmpGroupCfgID
Integer32,
hwVgmpGroupCfgEnable
INTEGER,
hwVgmpGroupCfgPri
Integer32,
hwVgmpGroupCfgUseVrrpPri
INTEGER,
hwVgmpGroupCfgPriPlusValue
Integer32,
hwVgmpGroupCfgPreemptEnable
INTEGER,
hwVgmpGroupCfgPreemptDelayValue
Integer32,
hwVgmpGroupCfgHelloInterval
Integer32,
hwVgmpGroupCfgSendEnable
INTEGER,
hwVgmpGroupCfgState
INTEGER,
hwVgmpGroupCfgRunPri
Integer32,
hwVgmpGroupCfgCreateTime
Unsigned32,
hwVgmpGroupCfgLastChangeTime
Unsigned32,
hwVgmpGroupCfgPeerState
INTEGER,
hwVgmpGroupCfgVrrpNum
Integer32,
hwVgmpGroupCfgReset
INTEGER,
hwVgmpGroupCfgOperRowStatus
RowStatus,
hwVgmpGroupCfgNextState
INTEGER
}
hwVgmpGroupCfgID OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vrrp-group ID."
::= { hwVgmpGroupCfgEntry 1 }
hwVgmpGroupCfgEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether to enable vrrp-group or not."
DEFVAL { disable }
::= { hwVgmpGroupCfgEntry 2 }
hwVgmpGroupCfgPri OBJECT-TYPE
SYNTAX Integer32 (1..254)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority of the vrrp-group.
This attribute cannot be configured if attribute 'hwVgmpGroupCfgUseVrrpPri' is set to 'enable'."
::= { hwVgmpGroupCfgEntry 3 }
hwVgmpGroupCfgUseVrrpPri OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether using vrrp priority compute vrrp-group priority or not.
This attribute is exclusive with attributes 'hwVgmpGroupCfgPri' and 'hwVgmpGroupCfgPriPlusValue',
so it is suggested not to configure this attribute together with 'hwVgmpGroupCfgPri' or 'hwVgmpGroupCfgPriPlusValue'.
'.
"
DEFVAL { disable }
::= { hwVgmpGroupCfgEntry 4 }
hwVgmpGroupCfgPriPlusValue OBJECT-TYPE
SYNTAX Integer32 (0..254)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The plus priority value after an interface added into a group.
This attribute cannot be configured if attribute 'hwVgmpGroupCfgUseVrrpPri' is set to 'enable'."
::= { hwVgmpGroupCfgEntry 5 }
hwVgmpGroupCfgPreemptEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether to enable preempt switch or not."
DEFVAL { disable }
::= { hwVgmpGroupCfgEntry 6 }
hwVgmpGroupCfgPreemptDelayValue OBJECT-TYPE
SYNTAX Integer32 (0..60000)
UNITS "milli-seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The delaying time of vrrp-group enters into new master state."
::= { hwVgmpGroupCfgEntry 7 }
hwVgmpGroupCfgHelloInterval OBJECT-TYPE
SYNTAX Integer32 (200..60000)
UNITS "milli-seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interval for the vrrp-group to send vgmp hello packets."
::= { hwVgmpGroupCfgEntry 8 }
hwVgmpGroupCfgSendEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether to enable vrrp-group group-send or not."
DEFVAL { disable }
::= { hwVgmpGroupCfgEntry 9 }
hwVgmpGroupCfgState OBJECT-TYPE
SYNTAX INTEGER
{
nouse(1),
init(2),
master(3),
slave(4),
master2slave(5),
slave2master(6),
max(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the vrrp-group."
::= { hwVgmpGroupCfgEntry 10 }
hwVgmpGroupCfgRunPri OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vrrp-group current run priority, it is different from hwVgmpGroupCfgPri.
The value calculates according as configured priority attribute."
::= { hwVgmpGroupCfgEntry 11 }
hwVgmpGroupCfgCreateTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A span of the current time subtract the vrrp-group create time.
This attribute is expressed as second."
::= { hwVgmpGroupCfgEntry 12 }
hwVgmpGroupCfgLastChangeTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A span of the current time subtract the vrrp-group last change time.
This attribute is expressed as second."
::= { hwVgmpGroupCfgEntry 13 }
hwVgmpGroupCfgPeerState OBJECT-TYPE
SYNTAX INTEGER
{
online(1),
offline(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vrrp-group peer state."
::= { hwVgmpGroupCfgEntry 14 }
hwVgmpGroupCfgVrrpNum OBJECT-TYPE
SYNTAX Integer32 (0..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vrrp-group member number."
::= { hwVgmpGroupCfgEntry 15 }
hwVgmpGroupCfgReset OBJECT-TYPE
SYNTAX INTEGER
{
reset(1),
unused(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A reset sign of vrrp-group statistics."
DEFVAL { unused }
::= { hwVgmpGroupCfgEntry 16 }
hwVgmpGroupCfgOperRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status variable."
::= { hwVgmpGroupCfgEntry 17 }
hwVgmpGroupCfgNextState OBJECT-TYPE
SYNTAX INTEGER
{
nouse(1),
init(2),
master(3),
slave(4),
master2slave(5),
slave2master(6),
unknown(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next state of vrrp-Group. It provides for trap matching, you can get only unknown state."
::= { hwVgmpGroupCfgEntry 18 }
-- ================= VGMP configuration Table End ===========================================
-- ================= Group member configuration table ==========================================
hwVgmpMemberTable OBJECT-TYPE
SYNTAX SEQUENCE OF HWVgmpMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vrrp-group member configuration table."
::= { vgmpOperations 2 }
hwVgmpMemberEntry OBJECT-TYPE
SYNTAX HWVgmpMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vrrp-group member configuration table."
INDEX { hwVgmpMemberIfIndex,hwVgmpGroupCfgID,hwVgmpMemberVRID }
::= { hwVgmpMemberTable 1 }
HWVgmpMemberEntry ::=
SEQUENCE {
hwVgmpMemberIfIndex
InterfaceIndex,
hwVgmpMemberVRID
Integer32,
hwVgmpMemberData
INTEGER,
hwVgmpMemberTran
INTEGER,
hwVgmpMemberVrrpOnline
INTEGER,
hwVgmpMemberOperRowStatus
RowStatus
}
hwVgmpMemberIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the member table."
::= { hwVgmpMemberEntry 1 }
hwVgmpMemberVRID OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vrrp-group member's vitual router id."
::= { hwVgmpMemberEntry 2 }
hwVgmpMemberData OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It specifies the vrrp-group member's attributes.
'enable' indicates this is the vgmp data channel."
DEFVAL { disable }
::= { hwVgmpMemberEntry 3 }
hwVgmpMemberTran OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It identifiers a vrrp-group member's attribute,
'enable' indicates this is the vgmp data transfer-only channel.
This attribute cannot be configured if attribute 'hwVgmpMemberData' is set to 'disable'.
"
DEFVAL { disable }
::= { hwVgmpMemberEntry 4 }
hwVgmpMemberVrrpOnline OBJECT-TYPE
SYNTAX INTEGER
{
down(1),
peerDown(2),
up(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vrrp-group member's peer state."
::= { hwVgmpMemberEntry 5 }
hwVgmpMemberOperRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status variable."
::= { hwVgmpMemberEntry 6 }
-- ================= Group member configuration table end ======================================
-- ================= BFD SESSION table ===============================================
hwVgmpTrackBFDTable OBJECT-TYPE
SYNTAX SEQUENCE OF HWVgmpTrackBFDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vrrp-group tracking BFD session table."
::= { vgmpOperations 3 }
hwVgmpTrackBFDEntry OBJECT-TYPE
SYNTAX HWVgmpTrackBFDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vrrp-group tracking BFD session table."
INDEX { hwVgmpGroupCfgID,hwVgmpTrackBFDID }
::= { hwVgmpTrackBFDTable 1 }
HWVgmpTrackBFDEntry ::=
SEQUENCE{
hwVgmpTrackBFDID
Integer32,
hwVgmpTrackBFDReduceValue
Integer32,
hwVgmpTrackBFDPreeEnable
INTEGER,
hwVgmpTrackBFDOperRowStatus
RowStatus
}
hwVgmpTrackBFDID OBJECT-TYPE
SYNTAX Integer32 (1..8191)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The session id of vrrp-group tracking BFD."
::= { hwVgmpTrackBFDEntry 1 }
hwVgmpTrackBFDReduceValue OBJECT-TYPE
SYNTAX Integer32 (0..254)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value which the system will subtract from priority,
when a bfd session is down. You can't set zero."
::= { hwVgmpTrackBFDEntry 2 }
hwVgmpTrackBFDPreeEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether to enable track BFD slave preempt."
DEFVAL { disable }
::= { hwVgmpTrackBFDEntry 3 }
hwVgmpTrackBFDOperRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status variable."
::= { hwVgmpTrackBFDEntry 4 }
-- ================= BFD SESSION table end ======================================
-- ================= packet statistic table ===============================================
hwVgmpStatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF HWVgmpStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The packets statistic information table."
::= { vgmpStatistics 1 }
hwVgmpStatisticEntry OBJECT-TYPE
SYNTAX HWVgmpStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the packets statistic information table."
INDEX { hwVgmpGroupCfgID }
::= { hwVgmpStatisticTable 1 }
HWVgmpStatisticEntry ::=
SEQUENCE {
hwVgmpStatisticCheckFailDropNum
Integer32,
hwVgmpStatisticDisableDropNum
Integer32,
hwVgmpStatisticModeTypeErrDropNum
Integer32,
hwVgmpStatisticAccHelloREQ
Integer32,
hwVgmpStatisticSendHelloREQ
Integer32,
hwVgmpStatisticAccHelloACK
Integer32,
hwVgmpStatisticSendHelloACK
Integer32,
hwVgmpStatisticAccMasterToSlaveREQ
Integer32,
hwVgmpStatisticSendMasterToSlaveREQ
Integer32,
hwVgmpStatisticAccMasterToSlaveACK
Integer32,
hwVgmpStatisticSendMasterToSlaveACK
Integer32,
hwVgmpStatisticAccMasterToSlaveNACK
Integer32,
hwVgmpStatisticSendMasterToSlaveNACK
Integer32,
hwVgmpStatisticAccSlaveToMasterREQ
Integer32,
hwVgmpStatisticSendSlaveToMasterREQ
Integer32,
hwVgmpStatisticAccSlaveToMasterACK
Integer32,
hwVgmpStatisticSendSlaveToMasterACK
Integer32,
hwVgmpStatisticAccSlaveToMasterNACK
Integer32,
hwVgmpStatisticSendSlaveToMasterNACK
Integer32
}
hwVgmpStatisticCheckFailDropNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped packets due to check failure."
::= { hwVgmpStatisticEntry 1 }
hwVgmpStatisticDisableDropNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped packets because the vrrp-group is disabled."
::= { hwVgmpStatisticEntry 2 }
hwVgmpStatisticModeTypeErrDropNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped packets because the vrrp-group mode or type is wrong."
::= { hwVgmpStatisticEntry 3 }
hwVgmpStatisticAccHelloREQ OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of hello REQ packets received by the vrrp-group."
::= { hwVgmpStatisticEntry 4 }
hwVgmpStatisticSendHelloREQ OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of hello REQ packets sent by the vrrp-group."
::= { hwVgmpStatisticEntry 5 }
hwVgmpStatisticAccHelloACK OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of hello ACK packets received by the vrrp-group."
::= { hwVgmpStatisticEntry 6 }
hwVgmpStatisticSendHelloACK OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vrrp-group sending hello ACK packets num."
::= { hwVgmpStatisticEntry 7 }
hwVgmpStatisticAccMasterToSlaveREQ OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MasterToSlave REQ packets received by the vrrp-group."
::= { hwVgmpStatisticEntry 8 }
hwVgmpStatisticSendMasterToSlaveREQ OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MasterToSlave REQ packets sent by the vrrp-group."
::= { hwVgmpStatisticEntry 9 }
hwVgmpStatisticAccMasterToSlaveACK OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MasterToSlave ACK packets received by the vrrp-group."
::= { hwVgmpStatisticEntry 10 }
hwVgmpStatisticSendMasterToSlaveACK OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MasterToSlave ACK packets sent by the vrrp-group."
::= { hwVgmpStatisticEntry 11 }
hwVgmpStatisticAccMasterToSlaveNACK OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MasterToSlave NACK packets received by the vrrp-group."
::= { hwVgmpStatisticEntry 12 }
hwVgmpStatisticSendMasterToSlaveNACK OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MasterToSlave NACK packets sent by the vrrp-group."
::= { hwVgmpStatisticEntry 13 }
hwVgmpStatisticAccSlaveToMasterREQ OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SlaveToMaster REQ packets received by the vrrp-group."
::= { hwVgmpStatisticEntry 14 }
hwVgmpStatisticSendSlaveToMasterREQ OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SlaveToMaster REQ packets sent by the vrrp-group."
::= { hwVgmpStatisticEntry 15 }
hwVgmpStatisticAccSlaveToMasterACK OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SlaveToMaster ACK packets received by the vrrp-group."
::= { hwVgmpStatisticEntry 16 }
hwVgmpStatisticSendSlaveToMasterACK OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SlaveToMaster ACK packets sent by the vrrp-group."
::= { hwVgmpStatisticEntry 17 }
hwVgmpStatisticAccSlaveToMasterNACK OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SlaveToMaster NACK packets received by the vrrp-group."
::= { hwVgmpStatisticEntry 18 }
hwVgmpStatisticSendSlaveToMasterNACK OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SlaveToMaster NACK packets sent by the vrrp-group."
::= { hwVgmpStatisticEntry 19 }
-- Conformance information
hwVGMPMIBCompliances OBJECT IDENTIFIER ::= { vgmpConformance 1 }
hwVGMPMIBGroups OBJECT IDENTIFIER ::= { hwVGMPMIBCompliances 1 }
hwVGMPGroAttrGroup OBJECT-GROUP
OBJECTS { hwVgmpGroupCfgEnable, hwVgmpGroupCfgPri, hwVgmpGroupCfgUseVrrpPri, hwVgmpGroupCfgPriPlusValue,
hwVgmpGroupCfgPreemptEnable,
hwVgmpGroupCfgPreemptDelayValue, hwVgmpGroupCfgHelloInterval, hwVgmpGroupCfgSendEnable,
hwVgmpGroupCfgState,hwVgmpGroupCfgRunPri,hwVgmpGroupCfgCreateTime,hwVgmpGroupCfgLastChangeTime,
hwVgmpGroupCfgPeerState,hwVgmpGroupCfgVrrpNum,hwVgmpGroupCfgReset,
hwVgmpGroupCfgOperRowStatus,hwVgmpGroupCfgNextState }
STATUS current
DESCRIPTION
" Attributes of the vrrp-group configuration."
::= { hwVGMPMIBGroups 1 }
hwVGMPMenAttrGroup OBJECT-GROUP
OBJECTS { hwVgmpMemberData, hwVgmpMemberTran, hwVgmpMemberVrrpOnline, hwVgmpMemberOperRowStatus }
STATUS current
DESCRIPTION
"The vrrp-group member table's atributes."
::= { hwVGMPMIBGroups 2 }
hwVGMPBFDSessionGroup OBJECT-GROUP
OBJECTS { hwVgmpTrackBFDReduceValue, hwVgmpTrackBFDPreeEnable, hwVgmpTrackBFDOperRowStatus }
STATUS current
DESCRIPTION
"The vrrp-group tracking BFD table's atributes."
::= { hwVGMPMIBGroups 3 }
hwVGMPStaticGroup OBJECT-GROUP
OBJECTS {hwVgmpStatisticCheckFailDropNum, hwVgmpStatisticDisableDropNum,hwVgmpStatisticModeTypeErrDropNum,
hwVgmpStatisticAccHelloREQ, hwVgmpStatisticSendHelloREQ,
hwVgmpStatisticAccHelloACK, hwVgmpStatisticSendHelloACK, hwVgmpStatisticAccMasterToSlaveREQ,
hwVgmpStatisticSendMasterToSlaveREQ, hwVgmpStatisticAccMasterToSlaveACK,
hwVgmpStatisticSendMasterToSlaveACK, hwVgmpStatisticAccMasterToSlaveNACK,
hwVgmpStatisticSendMasterToSlaveNACK, hwVgmpStatisticAccSlaveToMasterREQ,
hwVgmpStatisticSendSlaveToMasterREQ,
hwVgmpStatisticAccSlaveToMasterACK, hwVgmpStatisticSendSlaveToMasterACK,
hwVgmpStatisticAccSlaveToMasterNACK, hwVgmpStatisticSendSlaveToMasterNACK }
STATUS current
DESCRIPTION
"The vrrp-group packet's statistic info."
::= { hwVGMPMIBGroups 4 }
hwVGMPGlobalsGroup OBJECT-GROUP
OBJECTS { hwVgmpTrapSnmpCtrl, hwVgmpStrictCheck}
STATUS current
DESCRIPTION
"The vrrp-group global group."
::= { hwVGMPMIBGroups 5 }
hwVGMPNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwVgmpOtherStateToMaster, hwVgmpMasterToOtherState }
STATUS current
DESCRIPTION
"The vrrp-group notification group."
::= { hwVGMPMIBGroups 6 }
END
--
-- HUAWEI-VGMP-MIB.mib
--