1903 lines
73 KiB
Plaintext
1903 lines
73 KiB
Plaintext
LLDP-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, TimeStamp, TruthValue
|
|
FROM SNMPv2-TC
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
TimeFilter, ZeroBasedCounter32
|
|
FROM RMON2-MIB
|
|
AddressFamilyNumbers
|
|
FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB;
|
|
lldpMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200505060000Z" -- May 06, 2005
|
|
ORGANIZATION "IEEE 802.1 Working Group"
|
|
CONTACT-INFO
|
|
" WG-URL: http://grouper.ieee.org/groups/802/1/index.html
|
|
WG-EMail: stds-802-1@ieee.org
|
|
Contact: Paul Congdon
|
|
Postal: Hewlett-Packard Company
|
|
8000 Foothills Blvd.
|
|
Roseville, CA 95747
|
|
USA
|
|
Tel: +1-916-785-5753
|
|
E-mail: paul_congdon@hp.com"
|
|
DESCRIPTION
|
|
"Management Information Base module for LLDP configuration,
|
|
statistics, local system data and remote systems data
|
|
components.
|
|
Copyright (C) IEEE (2005). This version of this MIB module
|
|
is published as subclause 12.1 of IEEE Std 802.1AB.-2005;
|
|
see the standard itself for full legal notices."
|
|
REVISION "200505060000Z" -- May 06, 2005
|
|
DESCRIPTION
|
|
"Published as part of IEEE Std 802.1AB-2005 initial version."
|
|
::= { iso std(0) iso8802(8802) ieee802dot1(1) ieee802dot1mibs(1) 2 }
|
|
|
|
|
|
lldpNotifications OBJECT IDENTIFIER ::= { lldpMIB 0 }
|
|
lldpObjects OBJECT IDENTIFIER ::= { lldpMIB 1 }
|
|
lldpConformance OBJECT IDENTIFIER ::= { lldpMIB 2 }
|
|
|
|
|
|
--
|
|
-- LLDP MIB Objects
|
|
--
|
|
lldpConfiguration OBJECT IDENTIFIER ::= { lldpObjects 1 }
|
|
lldpStatistics OBJECT IDENTIFIER ::= { lldpObjects 2 }
|
|
lldpLocalSystemData OBJECT IDENTIFIER ::= { lldpObjects 3 }
|
|
lldpRemoteSystemsData OBJECT IDENTIFIER ::= { lldpObjects 4 }
|
|
lldpExtensions OBJECT IDENTIFIER ::= { lldpObjects 5 }
|
|
--
|
|
-- ***********************************************************
|
|
--
|
|
-- Textual Conventions
|
|
--
|
|
-- ***********************************************************
|
|
LldpChassisIdSubtype ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This TC describes the source of a chassis identifier.
|
|
The enumeration 'chassisComponent(1)' represents a chassis
|
|
identifier based on the value of entPhysicalAlias object
|
|
(defined in IETF RFC 2737) for a chassis component (i.e.,
|
|
an entPhysicalClass value of 'chassis(3)').
|
|
The enumeration 'interfaceAlias(2)' represents a chassis
|
|
identifier based on the value of ifAlias object (defined in
|
|
IETF RFC 2863) for an interface on the containing chassis.
|
|
The enumeration 'portComponent(3)' represents a chassis
|
|
identifier based on the value of entPhysicalAlias object
|
|
(defined in IETF RFC 2737) for a port or backplane
|
|
component (i.e., entPhysicalClass value of 'port(10)' or
|
|
'backplane(4)'), within the containing chassis.
|
|
The enumeration 'macAddress(4)' represents a chassis
|
|
identifier based on the value of a unicast source address
|
|
(encoded in network byte order and IEEE 802.3 canonical bit
|
|
order), of a port on the containing chassis as defined in
|
|
IEEE Std 802-2001.
|
|
The enumeration 'networkAddress(5)' represents a chassis
|
|
identifier based on a network address, associated with
|
|
a particular chassis. The encoded address is actually
|
|
composed of two fields. The first field is a single octet,
|
|
representing the IANA AddressFamilyNumbers value for the
|
|
specific address type, and the second field is the network
|
|
address value.
|
|
The enumeration 'interfaceName(6)' represents a chassis
|
|
identifier based on the value of ifName object (defined in
|
|
IETF RFC 2863) for an interface on the containing chassis.
|
|
The enumeration 'local(7)' represents a chassis identifier
|
|
based on a locally defined value."
|
|
SYNTAX INTEGER {
|
|
chassisComponent(1),
|
|
interfaceAlias(2),
|
|
portComponent(3),
|
|
macAddress(4),
|
|
networkAddress(5),
|
|
interfaceName(6),
|
|
local(7)
|
|
}
|
|
|
|
LldpChassisId ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This TC describes the format of a chassis identifier string.
|
|
Objects of this type are always used with an associated
|
|
LldpChassisIdSubtype object, which identifies the format of
|
|
the particular LldpChassisId object instance.
|
|
If the associated LldpChassisIdSubtype object has a value of
|
|
'chassisComponent(1)', then the octet string identifies
|
|
a particular instance of the entPhysicalAlias object
|
|
(defined in IETF RFC 2737) for a chassis component (i.e.,
|
|
an entPhysicalClass value of 'chassis(3)').
|
|
If the associated LldpChassisIdSubtype object has a value
|
|
of 'interfaceAlias(2)', then the octet string identifies
|
|
a particular instance of the ifAlias object (defined in
|
|
IETF RFC 2863) for an interface on the containing chassis.
|
|
If the particular ifAlias object does not contain any values,
|
|
another chassis identifier type should be used.
|
|
If the associated LldpChassisIdSubtype object has a value
|
|
of 'portComponent(3)', then the octet string identifies a
|
|
particular instance of the entPhysicalAlias object (defined
|
|
in IETF RFC 2737) for a port or backplane component within
|
|
the containing chassis.
|
|
If the associated LldpChassisIdSubtype object has a value of
|
|
'macAddress(4)', then this string identifies a particular
|
|
unicast source address (encoded in network byte order and
|
|
IEEE 802.3 canonical bit order), of a port on the containing
|
|
chassis as defined in IEEE Std 802-2001.
|
|
If the associated LldpChassisIdSubtype object has a value of
|
|
'networkAddress(5)', then this string identifies a particular
|
|
network address, encoded in network byte order, associated
|
|
with one or more ports on the containing chassis. The first
|
|
octet contains the IANA Address Family Numbers enumeration
|
|
value for the specific address type, and octets 2 through
|
|
N contain the network address value in network byte order.
|
|
If the associated LldpChassisIdSubtype object has a value
|
|
of 'interfaceName(6)', then the octet string identifies
|
|
a particular instance of the ifName object (defined in
|
|
IETF RFC 2863) for an interface on the containing chassis.
|
|
If the particular ifName object does not contain any values,
|
|
another chassis identifier type should be used.
|
|
If the associated LldpChassisIdSubtype object has a value of
|
|
'local(7)', then this string identifies a locally assigned
|
|
Chassis ID."
|
|
SYNTAX OCTET STRING (SIZE (1..255))
|
|
|
|
LldpPortIdSubtype ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This TC describes the source of a particular type of port
|
|
identifier used in the LLDP MIB.
|
|
The enumeration 'interfaceAlias(1)' represents a port
|
|
identifier based on the ifAlias MIB object, defined in IETF
|
|
RFC 2863.
|
|
The enumeration 'portComponent(2)' represents a port
|
|
identifier based on the value of entPhysicalAlias (defined in
|
|
IETF RFC 2737) for a port component (i.e., entPhysicalClass
|
|
value of 'port(10)'), within the containing chassis.
|
|
The enumeration 'macAddress(3)' represents a port identifier
|
|
based on a unicast source address (encoded in network
|
|
byte order and IEEE 802.3 canonical bit order), which has
|
|
been detected by the agent and associated with a particular
|
|
port (IEEE Std 802-2001).
|
|
The enumeration 'networkAddress(4)' represents a port
|
|
identifier based on a network address, detected by the agent
|
|
and associated with a particular port.
|
|
The enumeration 'interfaceName(5)' represents a port
|
|
identifier based on the ifName MIB object, defined in IETF
|
|
RFC 2863.
|
|
The enumeration 'agentCircuitId(6)' represents a port
|
|
identifier based on the agent-local identifier of the circuit
|
|
(defined in RFC 3046), detected by the agent and associated
|
|
with a particular port.
|
|
The enumeration 'local(7)' represents a port identifier
|
|
based on a value locally assigned."
|
|
SYNTAX INTEGER {
|
|
interfaceAlias(1),
|
|
portComponent(2),
|
|
macAddress(3),
|
|
networkAddress(4),
|
|
interfaceName(5),
|
|
agentCircuitId(6),
|
|
local(7)
|
|
}
|
|
|
|
LldpPortId ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This TC describes the format of a port identifier string.
|
|
Objects of this type are always used with an associated
|
|
LldpPortIdSubtype object, which identifies the format of the
|
|
particular LldpPortId object instance.
|
|
If the associated LldpPortIdSubtype object has a value of
|
|
'interfaceAlias(1)', then the octet string identifies a
|
|
particular instance of the ifAlias object (defined in IETF
|
|
RFC 2863). If the particular ifAlias object does not contain
|
|
any values, another port identifier type should be used.
|
|
If the associated LldpPortIdSubtype object has a value of
|
|
'portComponent(2)', then the octet string identifies a
|
|
particular instance of the entPhysicalAlias object (defined
|
|
in IETF RFC 2737) for a port or backplane component.
|
|
If the associated LldpPortIdSubtype object has a value of
|
|
'macAddress(3)', then this string identifies a particular
|
|
unicast source address (encoded in network byte order
|
|
and IEEE 802.3 canonical bit order) associated with the port
|
|
(IEEE Std 802-2001).
|
|
If the associated LldpPortIdSubtype object has a value of
|
|
'networkAddress(4)', then this string identifies a network
|
|
address associated with the port. The first octet contains
|
|
the IANA AddressFamilyNumbers enumeration value for the
|
|
specific address type, and octets 2 through N contain the
|
|
networkAddress address value in network byte order.
|
|
If the associated LldpPortIdSubtype object has a value of
|
|
'interfaceName(5)', then the octet string identifies a
|
|
particular instance of the ifName object (defined in IETF
|
|
RFC 2863). If the particular ifName object does not contain
|
|
any values, another port identifier type should be used.
|
|
If the associated LldpPortIdSubtype object has a value of
|
|
'agentCircuitId(6)', then this string identifies a agent-local
|
|
identifier of the circuit (defined in RFC 3046).
|
|
If the associated LldpPortIdSubtype object has a value of
|
|
'local(7)', then this string identifies a locally
|
|
assigned port ID."
|
|
SYNTAX OCTET STRING (SIZE (1..255))
|
|
|
|
LldpManAddrIfSubtype ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This TC describes the basis of a particular type of
|
|
interface associated with the management address.
|
|
The enumeration 'unknown(1)' represents the case where the
|
|
interface is not known.
|
|
The enumeration 'ifIndex(2)' represents interface identifier
|
|
based on the ifIndex MIB object.
|
|
The enumeration 'systemPortNumber(3)' represents interface
|
|
identifier based on the system port numbering convention."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.9.5"
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
ifIndex(2),
|
|
systemPortNumber(3)
|
|
}
|
|
|
|
LldpManAddress ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of a management address associated with the LLDP
|
|
agent that may be used to reach higher layer entities to
|
|
assist discovery by network management.
|
|
It should be noted that appropriate security credentials,
|
|
such as SNMP engineId, may be required to access the LLDP
|
|
agent using a management address. These necessary credentials
|
|
should be known by the network management and the objects
|
|
associated with the credentials are not included in the
|
|
LLDP agent."
|
|
SYNTAX OCTET STRING (SIZE (1..31))
|
|
|
|
LldpSystemCapabilitiesMap ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This TC describes the system capabilities.
|
|
The bit 'other(0)' indicates that the system has capabilities
|
|
other than those listed below.
|
|
The bit 'repeater(1)' indicates that the system has repeater
|
|
capability.
|
|
The bit 'bridge(2)' indicates that the system has bridge
|
|
capability.
|
|
The bit 'wlanAccessPoint(3)' indicates that the system has
|
|
WLAN access point capability.
|
|
The bit 'router(4)' indicates that the system has router
|
|
capability.
|
|
The bit 'telephone(5)' indicates that the system has telephone
|
|
capability.
|
|
The bit 'docsisCableDevice(6)' indicates that the system has
|
|
DOCSIS Cable Device capability (IETF RFC 2669 & 2670).
|
|
The bit 'stationOnly(7)' indicates that the system has only
|
|
station capability and nothing else."
|
|
SYNTAX BITS {
|
|
other(0),
|
|
repeater(1),
|
|
bridge(2),
|
|
wlanAccessPoint(3),
|
|
router(4),
|
|
telephone(5),
|
|
docsisCableDevice(6),
|
|
stationOnly(7)
|
|
}
|
|
|
|
LldpPortNumber ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each port contained in the chassis (that is known to the
|
|
LLDP agent) is uniquely identified by a port number.
|
|
A port number has no mandatory relationship to an
|
|
InterfaceIndex object (of the interfaces MIB, IETF RFC 2863).
|
|
If the LLDP agent is a IEEE 802.1D, IEEE 802.1Q bridge, the
|
|
LldpPortNumber will have the same value as the dot1dBasePort
|
|
object (defined in IETF RFC 1493) associated corresponding
|
|
bridge port. If the system hosting LLDP agent is not an
|
|
IEEE 802.1D or an IEEE 802.1Q bridge, the LldpPortNumber
|
|
will have the same value as the corresponding interface's
|
|
InterfaceIndex object.
|
|
Port numbers should be in the range of 1 and 4096 since a
|
|
particular port is also represented by the corresponding
|
|
port number bit in LldpPortList."
|
|
SYNTAX Integer32(1..4096)
|
|
|
|
LldpPortList ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet within this value specifies a set of eight ports,
|
|
with the first octet specifying ports 1 through 8, the second
|
|
octet specifying ports 9 through 16, etc. Within each octet,
|
|
the most significant bit represents the lowest numbered port,
|
|
and the least significant bit represents the highest numbered
|
|
port. Thus, each port of the system is represented by a
|
|
single bit within the value of this object. If that bit has
|
|
a value of '1' then that port is included in the set of ports;
|
|
the port is not included if its bit has a value of '0'."
|
|
REFERENCE
|
|
"IETF RFC 2674 section 5"
|
|
SYNTAX OCTET STRING(SIZE(0..512))
|
|
|
|
|
|
--
|
|
-- ***********************************************************
|
|
--
|
|
-- L L D P C O N F I G
|
|
--
|
|
-- ***********************************************************
|
|
--
|
|
lldpMessageTxInterval OBJECT-TYPE
|
|
SYNTAX Integer32(5..32768)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval at which LLDP frames are transmitted on
|
|
behalf of this LLDP agent.
|
|
The default value for lldpMessageTxInterval object is
|
|
30 seconds.
|
|
The value of this object must be restored from non-volatile
|
|
storage after a re-initialization of the management system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 10.5.3.3"
|
|
DEFVAL { 30 }
|
|
::= { lldpConfiguration 1 }
|
|
|
|
lldpMessageTxHoldMultiplier OBJECT-TYPE
|
|
SYNTAX Integer32(2..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time-to-live value expressed as a multiple of the
|
|
lldpMessageTxInterval object. The actual time-to-live value
|
|
used in LLDP frames, transmitted on behalf of this LLDP agent,
|
|
can be expressed by the following formula: TTL = min(65535,
|
|
(lldpMessageTxInterval * lldpMessageTxHoldMultiplier)) For
|
|
example, if the value of lldpMessageTxInterval is '30', and
|
|
the value of lldpMessageTxHoldMultiplier is '4', then the
|
|
value '120' is encoded in the TTL field in the LLDP header.
|
|
The default value for lldpMessageTxHoldMultiplier object is 4.
|
|
The value of this object must be restored from non-volatile
|
|
storage after a re-initialization of the management system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 10.5.3.3"
|
|
DEFVAL { 4 }
|
|
::= { lldpConfiguration 2 }
|
|
|
|
lldpReinitDelay OBJECT-TYPE
|
|
SYNTAX Integer32(1..10)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lldpReinitDelay indicates the delay (in units of
|
|
seconds) from when lldpPortConfigAdminStatus object of a
|
|
particular port becomes 'disabled' until re-initialization
|
|
will be attempted.
|
|
The default value for lldpReintDelay object is two seconds.
|
|
The value of this object must be restored from non-volatile
|
|
storage after a re-initialization of the management system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 10.5.3.3"
|
|
DEFVAL { 2 }
|
|
::= { lldpConfiguration 3 }
|
|
|
|
|
|
lldpTxDelay OBJECT-TYPE
|
|
SYNTAX Integer32(1..8192)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lldpTxDelay indicates the delay (in units
|
|
of seconds) between successive LLDP frame transmissions
|
|
initiated by value/status changes in the LLDP local systems
|
|
MIB. The recommended value for the lldpTxDelay is set by the
|
|
following formula:
|
|
1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval)
|
|
The default value for lldpTxDelay object is two seconds.
|
|
The value of this object must be restored from non-volatile
|
|
storage after a re-initialization of the management system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 10.5.3.3"
|
|
DEFVAL { 2 }
|
|
::= { lldpConfiguration 4 }
|
|
|
|
lldpNotificationInterval OBJECT-TYPE
|
|
SYNTAX Integer32(5..3600)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the transmission of LLDP notifications.
|
|
the agent must not generate more than one lldpRemTablesChange
|
|
notification-event in the indicated period, where a
|
|
'notification-event' is the transmission of a single
|
|
notification PDU type to a list of notification destinations.
|
|
If additional changes in lldpRemoteSystemsData object
|
|
groups occur within the indicated throttling period,
|
|
then these trap- events must be suppressed by the
|
|
agent. An NMS should periodically check the value of
|
|
lldpStatsRemTableLastChangeTime to detect any missed
|
|
lldpRemTablesChange notification-events, e.g. due to
|
|
throttling or transmission loss.
|
|
If notification transmission is enabled for particular ports,
|
|
the suggested default throttling period is 5 seconds.
|
|
The value of this object must be restored from non-volatile
|
|
storage after a re-initialization of the management system."
|
|
DEFVAL { 5 }
|
|
::= { lldpConfiguration 5 }
|
|
|
|
|
|
--
|
|
-- lldpPortConfigTable: LLDP configuration on a per port basis
|
|
--
|
|
lldpPortConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpPortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table that controls LLDP frame transmission on individual
|
|
ports."
|
|
::= { lldpConfiguration 6 }
|
|
|
|
lldpPortConfigEntry OBJECT-TYPE
|
|
SYNTAX LldpPortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LLDP configuration information for a particular port.
|
|
This configuration parameter controls the transmission and
|
|
the reception of LLDP frames on those ports whose rows are
|
|
created in this table."
|
|
INDEX { lldpPortConfigPortNum }
|
|
::= { lldpPortConfigTable 1 }
|
|
|
|
LldpPortConfigEntry ::= SEQUENCE {
|
|
lldpPortConfigPortNum LldpPortNumber,
|
|
lldpPortConfigAdminStatus INTEGER,
|
|
lldpPortConfigNotificationEnable TruthValue,
|
|
lldpPortConfigTLVsTxEnable BITS }
|
|
lldpPortConfigPortNum OBJECT-TYPE
|
|
SYNTAX LldpPortNumber
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value used to identify the port component
|
|
(contained in the local chassis with the LLDP agent)
|
|
associated with this entry.
|
|
The value of this object is used as a port index to the
|
|
lldpPortConfigTable."
|
|
::= { lldpPortConfigEntry 1 }
|
|
|
|
lldpPortConfigAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
txOnly(1),
|
|
rxOnly(2),
|
|
txAndRx(3),
|
|
disabled(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administratively desired status of the local LLDP agent.
|
|
If the associated lldpPortConfigAdminStatus object has a
|
|
value of 'txOnly(1)', then LLDP agent will transmit LLDP
|
|
frames on this port and it will not store any information
|
|
about the remote systems connected.
|
|
If the associated lldpPortConfigAdminStatus object has a
|
|
value of 'rxOnly(2)', then the LLDP agent will receive,
|
|
but it will not transmit LLDP frames on this port.
|
|
If the associated lldpPortConfigAdminStatus object has a
|
|
value of 'txAndRx(3)', then the LLDP agent will transmit
|
|
and receive LLDP frames on this port.
|
|
If the associated lldpPortConfigAdminStatus object has a
|
|
value of 'disabled(4)', then LLDP agent will not transmit or
|
|
receive LLDP frames on this port. If there is remote systems
|
|
information which is received on this port and stored in
|
|
other tables, before the port's lldpPortConfigAdminStatus
|
|
becomes disabled, then the information will naturally age out."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 10.5.1"
|
|
DEFVAL { txAndRx }
|
|
::= { lldpPortConfigEntry 2 }
|
|
|
|
lldpPortConfigNotificationEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lldpPortConfigNotificationEnable controls, on a per
|
|
port basis, whether or not notifications from the agent
|
|
are enabled. The value true(1) means that notifications are
|
|
enabled; the value false(2) means that they are not."
|
|
DEFVAL { false }
|
|
::= { lldpPortConfigEntry 3 }
|
|
|
|
lldpPortConfigTLVsTxEnable OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
portDesc(0),
|
|
sysName(1),
|
|
sysDesc(2),
|
|
sysCap(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lldpPortConfigTLVsTxEnable, defined as a bitmap,
|
|
includes the basic set of LLDP TLVs whose transmission is
|
|
allowed on the local LLDP agent by the network management.
|
|
Each bit in the bitmap corresponds to a TLV type associated
|
|
with a specific optional TLV.
|
|
It should be noted that the organizationally-specific TLVs
|
|
are excluded from the lldpTLVsTxEnable bitmap.
|
|
LLDP Organization Specific Information Extension MIBs should
|
|
have similar configuration object to control transmission
|
|
of their organizationally defined TLVs.
|
|
The bit 'portDesc(0)' indicates that LLDP agent should
|
|
transmit 'Port Description TLV'.
|
|
The bit 'sysName(1)' indicates that LLDP agent should transmit
|
|
'System Name TLV'.
|
|
The bit 'sysDesc(2)' indicates that LLDP agent should transmit
|
|
'System Description TLV'.
|
|
The bit 'sysCap(3)' indicates that LLDP agent should transmit
|
|
'System Capabilities TLV'.
|
|
There is no bit reserved for the management address TLV type
|
|
since transmission of management address TLVs are controlled
|
|
by another object, lldpConfigManAddrTable.
|
|
The default value for lldpPortConfigTLVsTxEnable object is
|
|
empty set, which means no enumerated values are set.
|
|
The value of this object must be restored from non-volatile
|
|
storage after a re-initialization of the management system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 10.2.1.1"
|
|
DEFVAL { { } }
|
|
::= { lldpPortConfigEntry 4 }
|
|
|
|
|
|
--
|
|
-- lldpManAddrConfigTxPortsTable : selection of management addresses
|
|
-- to be transmitted on a specified set
|
|
-- of ports.
|
|
--
|
|
lldpConfigManAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpConfigManAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table that controls selection of LLDP management address
|
|
TLV instances to be transmitted on individual ports."
|
|
::= { lldpConfiguration 7 }
|
|
|
|
lldpConfigManAddrEntry OBJECT-TYPE
|
|
SYNTAX LldpConfigManAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LLDP configuration information that specifies the set
|
|
of ports (represented as a PortList) on which the local
|
|
system management address instance will be transmitted.
|
|
This configuration object augments the lldpLocManAddrEntry,
|
|
therefore it is only present along with the management
|
|
address instance contained in the associated
|
|
lldpLocManAddrEntry entry.
|
|
Each active lldpConfigManAddrEntry must be restored from
|
|
non-volatile and re-created (along with the corresponding
|
|
lldpLocManAddrEntry) after a re-initialization of the
|
|
management system."
|
|
AUGMENTS { lldpLocManAddrEntry }
|
|
::= { lldpConfigManAddrTable 1 }
|
|
|
|
LldpConfigManAddrEntry ::= SEQUENCE {
|
|
lldpConfigManAddrPortsTxEnable LldpPortList
|
|
}
|
|
lldpConfigManAddrPortsTxEnable OBJECT-TYPE
|
|
SYNTAX LldpPortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of ports that are identified by a PortList, in which
|
|
each port is represented as a bit. The corresponding local
|
|
system management address instance will be transmitted on the
|
|
member ports of the lldpManAddrPortsTxEnable.
|
|
The default value for lldpConfigManAddrPortsTxEnable object
|
|
is empty binary string, which means no ports are specified
|
|
for advertising indicated management address instance."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 10.2.1.1"
|
|
DEFVAL { ''H } -- empty binary string
|
|
::= { lldpConfigManAddrEntry 1 }
|
|
|
|
--
|
|
-- ***********************************************************
|
|
--
|
|
-- L L D P S T A T S
|
|
--
|
|
-- ***********************************************************
|
|
--
|
|
-- LLDP Stats Group
|
|
|
|
lldpStatsRemTablesLastChangeTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime object (defined in IETF RFC 3418)
|
|
at the time an entry is created, modified, or deleted in the
|
|
in tables associated with the lldpRemoteSystemsData objects
|
|
and all LLDP extension objects associated with remote systems.
|
|
An NMS can use this object to reduce polling of the
|
|
lldpRemoteSystemsData objects."
|
|
::= { lldpStatistics 1 }
|
|
|
|
lldpStatsRemTablesInserts OBJECT-TYPE
|
|
SYNTAX ZeroBasedCounter32
|
|
UNITS "table entries"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the complete set of information
|
|
advertised by a particular MSAP has been inserted into tables
|
|
contained in lldpRemoteSystemsData and lldpExtensions objects.
|
|
The complete set of information received from a particular
|
|
MSAP should be inserted into related tables. If partial
|
|
information cannot be inserted for a reason such as lack
|
|
of resources, all of the complete set of information should
|
|
be removed.
|
|
|
|
This counter should be incremented only once after the
|
|
complete set of information is successfully recorded
|
|
in all related tables. Any failures during inserting
|
|
information set which result in deletion of previously
|
|
inserted information should not trigger any changes in
|
|
lldpStatsRemTablesInserts since the insert is not completed
|
|
yet or in lldpStatsRemTablesDeletes, since the deletion
|
|
would only be a partial deletion. If the failure was the
|
|
result of lack of resources, the lldpStatsRemTablesDrops
|
|
counter should be incremented once."
|
|
::= { lldpStatistics 2 }
|
|
|
|
lldpStatsRemTablesDeletes OBJECT-TYPE
|
|
SYNTAX ZeroBasedCounter32
|
|
UNITS "table entries"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the complete set of information
|
|
advertised by a particular MSAP has been deleted from
|
|
tables contained in lldpRemoteSystemsData and lldpExtensions
|
|
objects.
|
|
This counter should be incremented only once when the
|
|
complete set of information is completely deleted from all
|
|
related tables. Partial deletions, such as deletion of
|
|
rows associated with a particular MSAP from some tables,
|
|
but not from all tables are not allowed, thus should not
|
|
change the value of this counter."
|
|
::= { lldpStatistics 3 }
|
|
|
|
lldpStatsRemTablesDrops OBJECT-TYPE
|
|
SYNTAX ZeroBasedCounter32
|
|
UNITS "table entries"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the complete set of information
|
|
advertised by a particular MSAP could not be entered into
|
|
tables contained in lldpRemoteSystemsData and lldpExtensions
|
|
objects because of insufficient resources."
|
|
::= { lldpStatistics 4 }
|
|
|
|
lldpStatsRemTablesAgeouts OBJECT-TYPE
|
|
SYNTAX ZeroBasedCounter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the complete set of information
|
|
advertised by a particular MSAP has been deleted from tables
|
|
contained in lldpRemoteSystemsData and lldpExtensions objects
|
|
because the information timeliness interval has expired.
|
|
This counter should be incremented only once when the complete
|
|
set of information is completely invalidated (aged out)
|
|
from all related tables. Partial aging, similar to deletion
|
|
case, is not allowed, and thus, should not change the value
|
|
of this counter."
|
|
::= { lldpStatistics 5 }
|
|
|
|
--
|
|
-- TX statistics
|
|
--
|
|
lldpStatsTxPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpStatsTxPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing LLDP transmission statistics for
|
|
individual ports. Entries are not required to exist in
|
|
this table while the lldpPortConfigEntry object is equal to
|
|
'disabled(4)'."
|
|
::= { lldpStatistics 6 }
|
|
|
|
lldpStatsTxPortEntry OBJECT-TYPE
|
|
SYNTAX LldpStatsTxPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LLDP frame transmission statistics for a particular port.
|
|
The port must be contained in the same chassis as the
|
|
LLDP agent.
|
|
All counter values in a particular entry shall be
|
|
maintained on a continuing basis and shall not be deleted
|
|
upon expiration of rxInfoTTL timing counters in the LLDP
|
|
remote systems MIB of the receipt of a shutdown frame from
|
|
a remote LLDP agent.
|
|
All statistical counters associated with a particular
|
|
port on the local LLDP agent become frozen whenever the
|
|
adminStatus is disabled for the same port."
|
|
INDEX { lldpStatsTxPortNum }
|
|
::= { lldpStatsTxPortTable 1 }
|
|
|
|
LldpStatsTxPortEntry ::= SEQUENCE {
|
|
lldpStatsTxPortNum LldpPortNumber,
|
|
lldpStatsTxPortFramesTotal Counter32
|
|
}
|
|
|
|
lldpStatsTxPortNum OBJECT-TYPE
|
|
SYNTAX LldpPortNumber
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value used to identify the port component
|
|
(contained in the local chassis with the LLDP agent)
|
|
associated with this entry.
|
|
The value of this object is used as a port index to the
|
|
lldpStatsTable."
|
|
::= { lldpStatsTxPortEntry 1 }
|
|
|
|
lldpStatsTxPortFramesTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of LLDP frames transmitted by this LLDP agent
|
|
on the indicated port."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 10.5.2.1"
|
|
::= { lldpStatsTxPortEntry 2 }
|
|
|
|
--
|
|
-- RX statistics
|
|
--
|
|
lldpStatsRxPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpStatsRxPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing LLDP reception statistics for individual
|
|
ports. Entries are not required to exist in this table while
|
|
the lldpPortConfigEntry object is equal to 'disabled(4)'."
|
|
::= { lldpStatistics 7 }
|
|
|
|
lldpStatsRxPortEntry OBJECT-TYPE
|
|
SYNTAX LldpStatsRxPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LLDP frame reception statistics for a particular port.
|
|
The port must be contained in the same chassis as the
|
|
LLDP agent.
|
|
All counter values in a particular entry shall be
|
|
maintained on a continuing basis and shall not be deleted
|
|
upon expiration of rxInfoTTL timing counters in the LLDP
|
|
remote systems MIB of the receipt of a shutdown frame from
|
|
a remote LLDP agent.
|
|
All statistical counters associated with a particular
|
|
port on the local LLDP agent become frozen whenever the
|
|
adminStatus is disabled for the same port."
|
|
INDEX { lldpStatsRxPortNum }
|
|
::= { lldpStatsRxPortTable 1 }
|
|
|
|
LldpStatsRxPortEntry ::= SEQUENCE {
|
|
lldpStatsRxPortNum LldpPortNumber,
|
|
lldpStatsRxPortFramesDiscardedTotal Counter32,
|
|
lldpStatsRxPortFramesErrors Counter32,
|
|
lldpStatsRxPortFramesTotal Counter32,
|
|
lldpStatsRxPortTLVsDiscardedTotal Counter32,
|
|
lldpStatsRxPortTLVsUnrecognizedTotal Counter32,
|
|
lldpStatsRxPortAgeoutsTotal ZeroBasedCounter32
|
|
}
|
|
|
|
lldpStatsRxPortNum OBJECT-TYPE
|
|
SYNTAX LldpPortNumber
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value used to identify the port component
|
|
(contained in the local chassis with the LLDP agent)
|
|
associated with this entry.
|
|
The value of this object is used as a port index to the
|
|
lldpStatsTable."
|
|
::= { lldpStatsRxPortEntry 1 }
|
|
|
|
lldpStatsRxPortFramesDiscardedTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of LLDP frames received by this LLDP agent on
|
|
the indicated port, and then discarded for any reason.
|
|
This counter can provide an indication that LLDP header
|
|
formating problems may exist with the local LLDP agent in
|
|
the sending system or that LLDPDU validation problems may
|
|
exist with the local LLDP agent in the receiving system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 10.5.2.2"
|
|
::= { lldpStatsRxPortEntry 2 }
|
|
|
|
lldpStatsRxPortFramesErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of invalid LLDP frames received by this LLDP
|
|
agent on the indicated port, while this LLDP agent is enabled."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 10.5.2.2"
|
|
::= { lldpStatsRxPortEntry 3 }
|
|
|
|
lldpStatsRxPortFramesTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of valid LLDP frames received by this LLDP agent
|
|
on the indicated port, while this LLDP agent is enabled."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 10.5.2.2"
|
|
::= { lldpStatsRxPortEntry 4 }
|
|
|
|
lldpStatsRxPortTLVsDiscardedTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of LLDP TLVs discarded for any reason by this LLDP
|
|
agent on the indicated port."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 10.5.2.2"
|
|
::= { lldpStatsRxPortEntry 5 }
|
|
|
|
lldpStatsRxPortTLVsUnrecognizedTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of LLDP TLVs received on the given port that
|
|
are not recognized by this LLDP agent on the indicated port.
|
|
An unrecognized TLV is referred to as the TLV whose type value
|
|
is in the range of reserved TLV types (000 1001 - 111 1110)
|
|
in Table 9.1 of IEEE Std 802.1AB-2005. An unrecognized
|
|
TLV may be a basic management TLV from a later LLDP version."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 10.5.2.2"
|
|
::= { lldpStatsRxPortEntry 6 }
|
|
|
|
lldpStatsRxPortAgeoutsTotal OBJECT-TYPE
|
|
SYNTAX ZeroBasedCounter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter that represents the number of age-outs that
|
|
occurred on a given port. An age-out is the number of
|
|
times the complete set of information advertised by a
|
|
particular MSAP has been deleted from tables contained in
|
|
lldpRemoteSystemsData and lldpExtensions objects because
|
|
the information timeliness interval has expired.
|
|
This counter is similar to lldpStatsRemTablesAgeouts, except
|
|
that the counter is on a per port basis. This enables NMS to
|
|
poll tables associated with the lldpRemoteSystemsData objects
|
|
and all LLDP extension objects associated with remote systems
|
|
on the indicated port only.
|
|
This counter should be set to zero during agent initialization
|
|
and its value should not be saved in non-volatile storage.
|
|
When a port's admin status changes from 'disabled' to
|
|
'rxOnly', 'txOnly' or 'txAndRx', the counter associated with
|
|
the same port should reset to 0. The agent should also flush
|
|
all remote system information associated with the same port.
|
|
This counter should be incremented only once when the
|
|
complete set of information is invalidated (aged out) from
|
|
all related tables on a particular port. Partial aging
|
|
is not allowed, and thus, should not change the value of
|
|
this counter."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 10.5.2.2"
|
|
::= { lldpStatsRxPortEntry 7 }
|
|
|
|
-- ***********************************************************
|
|
--
|
|
-- L O C A L S Y S T E M D A T A
|
|
--
|
|
-- ***********************************************************
|
|
|
|
lldpLocChassisIdSubtype OBJECT-TYPE
|
|
SYNTAX LldpChassisIdSubtype
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of encoding used to identify the chassis
|
|
associated with the local system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.2.2"
|
|
::= { lldpLocalSystemData 1 }
|
|
|
|
lldpLocChassisId OBJECT-TYPE
|
|
SYNTAX LldpChassisId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the chassis component
|
|
associated with the local system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.2.3"
|
|
::= { lldpLocalSystemData 2 }
|
|
|
|
lldpLocSysName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the system name of the
|
|
local system. If the local agent supports IETF RFC 3418,
|
|
lldpLocSysName object should have the same value of sysName
|
|
object."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.6.2"
|
|
::= { lldpLocalSystemData 3 }
|
|
|
|
lldpLocSysDesc OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the system description
|
|
of the local system. If the local agent supports IETF RFC 3418,
|
|
lldpLocSysDesc object should have the same value of sysDesc
|
|
object."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.7.2"
|
|
::= { lldpLocalSystemData 4 }
|
|
|
|
lldpLocSysCapSupported OBJECT-TYPE
|
|
SYNTAX LldpSystemCapabilitiesMap
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bitmap value used to identify which system capabilities
|
|
are supported on the local system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.8.1"
|
|
::= { lldpLocalSystemData 5 }
|
|
|
|
lldpLocSysCapEnabled OBJECT-TYPE
|
|
SYNTAX LldpSystemCapabilitiesMap
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bitmap value used to identify which system capabilities
|
|
are enabled on the local system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.8.2"
|
|
::= { lldpLocalSystemData 6 }
|
|
|
|
--
|
|
-- lldpLocPortTable : Port specific Local system data
|
|
--
|
|
lldpLocPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpLocPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains one or more rows per port information
|
|
associated with the local system known to this agent."
|
|
::= { lldpLocalSystemData 7 }
|
|
|
|
lldpLocPortEntry OBJECT-TYPE
|
|
SYNTAX LldpLocPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a particular port component.
|
|
Entries may be created and deleted in this table by the
|
|
agent."
|
|
INDEX { lldpLocPortNum }
|
|
::= { lldpLocPortTable 1 }
|
|
|
|
LldpLocPortEntry ::= SEQUENCE {
|
|
lldpLocPortNum LldpPortNumber,
|
|
lldpLocPortIdSubtype LldpPortIdSubtype,
|
|
lldpLocPortId LldpPortId,
|
|
lldpLocPortDesc SnmpAdminString
|
|
}
|
|
lldpLocPortNum OBJECT-TYPE
|
|
SYNTAX LldpPortNumber
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value used to identify the port component
|
|
(contained in the local chassis with the LLDP agent)
|
|
associated with this entry.
|
|
The value of this object is used as a port index to the
|
|
lldpLocPortTable."
|
|
::= { lldpLocPortEntry 1 }
|
|
|
|
lldpLocPortIdSubtype OBJECT-TYPE
|
|
SYNTAX LldpPortIdSubtype
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of port identifier encoding used in the associated
|
|
'lldpLocPortId' object."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.3.2"
|
|
::= { lldpLocPortEntry 2 }
|
|
|
|
lldpLocPortId OBJECT-TYPE
|
|
SYNTAX LldpPortId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the port component
|
|
associated with a given port in the local system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.3.3"
|
|
::= { lldpLocPortEntry 3 }
|
|
|
|
lldpLocPortDesc OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the IEEE 802 LAN station's port
|
|
description associated with the local system. If the local
|
|
agent supports IETF RFC 2863, lldpLocPortDesc object should
|
|
have the same value of ifDescr object."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.5.2"
|
|
::= { lldpLocPortEntry 4 }
|
|
|
|
--
|
|
-- lldpLocManAddrTable : Management addresses of the local system
|
|
--
|
|
lldpLocManAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpLocManAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains management address information on the
|
|
local system known to this agent."
|
|
::= { lldpLocalSystemData 8 }
|
|
|
|
lldpLocManAddrEntry OBJECT-TYPE
|
|
SYNTAX LldpLocManAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Management address information about a particular chassis
|
|
component. There may be multiple management addresses
|
|
configured on the system identified by a particular
|
|
lldpLocChassisId. Each management address should have
|
|
distinct 'management address type' (lldpLocManAddrSubtype) and
|
|
'management address' (lldpLocManAddr.)
|
|
Entries may be created and deleted in this table by the
|
|
agent."
|
|
INDEX { lldpLocManAddrSubtype,
|
|
lldpLocManAddr }
|
|
::= { lldpLocManAddrTable 1 }
|
|
|
|
LldpLocManAddrEntry ::= SEQUENCE {
|
|
|
|
lldpLocManAddrSubtype AddressFamilyNumbers,
|
|
lldpLocManAddr LldpManAddress,
|
|
lldpLocManAddrLen Integer32,
|
|
lldpLocManAddrIfSubtype LldpManAddrIfSubtype,
|
|
lldpLocManAddrIfId Integer32,
|
|
lldpLocManAddrOID OBJECT IDENTIFIER
|
|
}
|
|
|
|
lldpLocManAddrSubtype OBJECT-TYPE
|
|
SYNTAX AddressFamilyNumbers
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of management address identifier encoding used in
|
|
the associated 'lldpLocManagmentAddr' object."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.9.3"
|
|
::= { lldpLocManAddrEntry 1 }
|
|
|
|
lldpLocManAddr OBJECT-TYPE
|
|
SYNTAX LldpManAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the management address
|
|
component associated with the local system. The purpose of
|
|
this address is to contact the management entity."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.9.4"
|
|
::= { lldpLocManAddrEntry 2 }
|
|
|
|
lldpLocManAddrLen OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total length of the management address subtype and the
|
|
management address fields in LLDPDUs transmitted by the
|
|
local LLDP agent.
|
|
The management address length field is needed so that the
|
|
receiving systems that do not implement SNMP will not be
|
|
required to implement an iana family numbers/address length
|
|
equivalency table in order to decode the management address."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.9.2"
|
|
::= { lldpLocManAddrEntry 3 }
|
|
|
|
lldpLocManAddrIfSubtype OBJECT-TYPE
|
|
SYNTAX LldpManAddrIfSubtype
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The enumeration value that identifies the interface numbering
|
|
method used for defining the interface number, associated
|
|
with the local system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.9.5"
|
|
|
|
::= { lldpLocManAddrEntry 4 }
|
|
|
|
lldpLocManAddrIfId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The integer value used to identify the interface number
|
|
regarding the management address component associated with
|
|
the local system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.9.6"
|
|
::= { lldpLocManAddrEntry 5 }
|
|
|
|
lldpLocManAddrOID OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OID value used to identify the type of hardware component
|
|
or protocol entity associated with the management address
|
|
advertised by the local system agent."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.9.8"
|
|
::= { lldpLocManAddrEntry 6 }
|
|
|
|
-- ***********************************************************
|
|
--
|
|
-- R E M O T E S Y S T E M S D A T A
|
|
--
|
|
-- ***********************************************************
|
|
lldpRemTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpRemEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains one or more rows per physical network
|
|
connection known to this agent. The agent may wish to ensure
|
|
that only one lldpRemEntry is present for each local port,
|
|
or it may choose to maintain multiple lldpRemEntries for
|
|
the same local port.
|
|
The following procedure may be used to retrieve remote
|
|
systems information updates from an LLDP agent:
|
|
1. NMS polls all tables associated with remote systems
|
|
and keeps a local copy of the information retrieved.
|
|
NMS polls periodically the values of the following
|
|
objects:
|
|
a. lldpStatsRemTablesInserts
|
|
b. lldpStatsRemTablesDeletes
|
|
c. lldpStatsRemTablesDrops
|
|
d. lldpStatsRemTablesAgeouts
|
|
e. lldpStatsRxPortAgeoutsTotal for all ports.
|
|
2. LLDP agent updates remote systems MIB objects, and
|
|
sends out notifications to a list of notification
|
|
|
|
destinations.
|
|
3. NMS receives the notifications and compares the new
|
|
values of objects listed in step 1.
|
|
Periodically, NMS should poll the object
|
|
lldpStatsRemTablesLastChangeTime to find out if anything
|
|
has changed since the last poll. if something has
|
|
changed, NMS will poll the objects listed in step 1 to
|
|
figure out what kind of changes occurred in the tables.
|
|
if value of lldpStatsRemTablesInserts has changed,
|
|
then NMS will walk all tables by employing TimeFilter
|
|
with the last-polled time value. This request will
|
|
return new objects or objects whose values are updated
|
|
since the last poll.
|
|
if value of lldpStatsRemTablesAgeouts has changed,
|
|
then NMS will walk the lldpStatsRxPortAgeoutsTotal and
|
|
compare the new values with previously recorded ones.
|
|
For ports whose lldpStatsRxPortAgeoutsTotal value is
|
|
greater than the recorded value, NMS will have to
|
|
retrieve objects associated with those ports from
|
|
table(s) without employing a TimeFilter (which is
|
|
performed by specifying 0 for the TimeFilter.)
|
|
lldpStatsRemTablesDeletes and lldpStatsRemTablesDrops
|
|
objects are provided for informational purposes."
|
|
::= { lldpRemoteSystemsData 1 }
|
|
|
|
lldpRemEntry OBJECT-TYPE
|
|
SYNTAX LldpRemEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a particular physical network connection.
|
|
Entries may be created and deleted in this table by the agent,
|
|
if a physical topology discovery process is active."
|
|
INDEX {
|
|
lldpRemTimeMark,
|
|
lldpRemLocalPortNum,
|
|
lldpRemIndex
|
|
}
|
|
::= { lldpRemTable 1 }
|
|
|
|
LldpRemEntry ::= SEQUENCE {
|
|
lldpRemTimeMark TimeFilter,
|
|
lldpRemLocalPortNum LldpPortNumber,
|
|
lldpRemIndex Integer32,
|
|
lldpRemChassisIdSubtype LldpChassisIdSubtype,
|
|
lldpRemChassisId LldpChassisId,
|
|
lldpRemPortIdSubtype LldpPortIdSubtype,
|
|
lldpRemPortId LldpPortId,
|
|
lldpRemPortDesc SnmpAdminString,
|
|
lldpRemSysName SnmpAdminString,
|
|
lldpRemSysDesc SnmpAdminString,
|
|
lldpRemSysCapSupported LldpSystemCapabilitiesMap,
|
|
lldpRemSysCapEnabled LldpSystemCapabilitiesMap
|
|
}
|
|
|
|
lldpRemTimeMark OBJECT-TYPE
|
|
SYNTAX TimeFilter
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A TimeFilter for this entry. See the TimeFilter textual
|
|
convention in IETF RFC 2021 and
|
|
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
|
|
to see how TimeFilter works."
|
|
REFERENCE
|
|
"IETF RFC 2021 section 6"
|
|
::= { lldpRemEntry 1 }
|
|
|
|
lldpRemLocalPortNum OBJECT-TYPE
|
|
SYNTAX LldpPortNumber
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value used to identify the port component
|
|
(contained in the local chassis with the LLDP agent)
|
|
associated with this entry. The lldpRemLocalPortNum
|
|
identifies the port on which the remote system information
|
|
is received.
|
|
The value of this object is used as a port index to the
|
|
lldpRemTable."
|
|
::= { lldpRemEntry 2 }
|
|
|
|
lldpRemIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents an arbitrary local integer value used
|
|
by this agent to identify a particular connection instance,
|
|
unique only for the indicated remote system.
|
|
An agent is encouraged to assign monotonically increasing
|
|
index values to new entries, starting with one, after each
|
|
reboot. It is considered unlikely that the lldpRemIndex
|
|
will wrap between reboots."
|
|
::= { lldpRemEntry 3 }
|
|
|
|
lldpRemChassisIdSubtype OBJECT-TYPE
|
|
SYNTAX LldpChassisIdSubtype
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of encoding used to identify the chassis associated
|
|
with the remote system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.2.2"
|
|
::= { lldpRemEntry 4 }
|
|
|
|
lldpRemChassisId OBJECT-TYPE
|
|
SYNTAX LldpChassisId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the chassis component
|
|
associated with the remote system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.2.3"
|
|
::= { lldpRemEntry 5 }
|
|
|
|
lldpRemPortIdSubtype OBJECT-TYPE
|
|
SYNTAX LldpPortIdSubtype
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of port identifier encoding used in the associated
|
|
'lldpRemPortId' object."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.3.2"
|
|
::= { lldpRemEntry 6 }
|
|
|
|
lldpRemPortId OBJECT-TYPE
|
|
SYNTAX LldpPortId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the port component
|
|
associated with the remote system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.3.3"
|
|
::= { lldpRemEntry 7 }
|
|
|
|
lldpRemPortDesc OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the description of
|
|
the given port associated with the remote system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.5.2"
|
|
::= { lldpRemEntry 8 }
|
|
|
|
lldpRemSysName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the system name of the
|
|
remote system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.6.2"
|
|
::= { lldpRemEntry 9 }
|
|
|
|
lldpRemSysDesc OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the system description
|
|
of the remote system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.7.2"
|
|
::= { lldpRemEntry 10 }
|
|
|
|
lldpRemSysCapSupported OBJECT-TYPE
|
|
SYNTAX LldpSystemCapabilitiesMap
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bitmap value used to identify which system capabilities
|
|
are supported on the remote system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.8.1"
|
|
::= { lldpRemEntry 11 }
|
|
|
|
lldpRemSysCapEnabled OBJECT-TYPE
|
|
SYNTAX LldpSystemCapabilitiesMap
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bitmap value used to identify which system capabilities
|
|
are enabled on the remote system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.8.2"
|
|
::= { lldpRemEntry 12 }
|
|
|
|
--
|
|
-- lldpRemManAddrTable : Management addresses of the remote system
|
|
--
|
|
lldpRemManAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpRemManAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains one or more rows per management address
|
|
information on the remote system learned on a particular port
|
|
contained in the local chassis known to this agent."
|
|
::= { lldpRemoteSystemsData 2 }
|
|
|
|
lldpRemManAddrEntry OBJECT-TYPE
|
|
SYNTAX LldpRemManAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Management address information about a particular chassis
|
|
component. There may be multiple management addresses
|
|
configured on the remote system identified by a particular
|
|
lldpRemIndex whose information is received on
|
|
lldpRemLocalPortNum of the local system. Each management
|
|
address should have distinct 'management address
|
|
type' (lldpRemManAddrSubtype) and 'management address'
|
|
(lldpRemManAddr.)
|
|
Entries may be created and deleted in this table by the
|
|
agent."
|
|
INDEX { lldpRemTimeMark,
|
|
lldpRemLocalPortNum,
|
|
lldpRemIndex,
|
|
lldpRemManAddrSubtype,
|
|
lldpRemManAddr
|
|
}
|
|
::= { lldpRemManAddrTable 1 }
|
|
|
|
LldpRemManAddrEntry ::= SEQUENCE {
|
|
lldpRemManAddrSubtype AddressFamilyNumbers,
|
|
lldpRemManAddr LldpManAddress,
|
|
lldpRemManAddrIfSubtype LldpManAddrIfSubtype,
|
|
lldpRemManAddrIfId Integer32,
|
|
lldpRemManAddrOID OBJECT IDENTIFIER
|
|
}
|
|
|
|
lldpRemManAddrSubtype OBJECT-TYPE
|
|
SYNTAX AddressFamilyNumbers
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of management address identifier encoding used in
|
|
the associated 'lldpRemManagmentAddr' object."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.9.3"
|
|
::= { lldpRemManAddrEntry 1 }
|
|
|
|
lldpRemManAddr OBJECT-TYPE
|
|
SYNTAX LldpManAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the management address
|
|
component associated with the remote system. The purpose
|
|
of this address is to contact the management entity."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.9.4"
|
|
::= { lldpRemManAddrEntry 2 }
|
|
|
|
lldpRemManAddrIfSubtype OBJECT-TYPE
|
|
SYNTAX LldpManAddrIfSubtype
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The enumeration value that identifies the interface numbering
|
|
method used for defining the interface number, associated
|
|
with the remote system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.9.5"
|
|
::= { lldpRemManAddrEntry 3 }
|
|
|
|
lldpRemManAddrIfId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The integer value used to identify the interface number
|
|
regarding the management address component associated with
|
|
the remote system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.9.6"
|
|
::= { lldpRemManAddrEntry 4 }
|
|
|
|
lldpRemManAddrOID OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OID value used to identify the type of hardware component
|
|
or protocol entity associated with the management address
|
|
advertised by the remote system agent."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.5.9.8"
|
|
::= { lldpRemManAddrEntry 5 }
|
|
|
|
--
|
|
-- lldpRemUnknownTLVTable : Unrecognized TLV information
|
|
--
|
|
lldpRemUnknownTLVTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpRemUnknownTLVEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains information about an incoming TLV which
|
|
is not recognized by the receiving LLDP agent. The TLV may
|
|
be from a later version of the basic management set.
|
|
This table should only contain TLVs that are found in
|
|
a single LLDP frame. Entries in this table, associated
|
|
with an MAC service access point (MSAP, the access point
|
|
for MAC services provided to the LCC sublayer, defined
|
|
in IEEE 100, which is also identified with a particular
|
|
lldpRemLocalPortNum, lldpRemIndex pair) are overwritten with
|
|
most recently received unrecognized TLV from the same MSAP,
|
|
or they will naturally age out when the rxInfoTTL timer
|
|
(associated with the MSAP) expires."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 10.3.2"
|
|
::= { lldpRemoteSystemsData 3 }
|
|
|
|
lldpRemUnknownTLVEntry OBJECT-TYPE
|
|
SYNTAX LldpRemUnknownTLVEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about an unrecognized TLV received from a
|
|
physical network connection. Entries may be created and
|
|
deleted in this table by the agent, if a physical topology
|
|
discovery process is active."
|
|
INDEX {
|
|
lldpRemTimeMark,
|
|
lldpRemLocalPortNum,
|
|
lldpRemIndex,
|
|
lldpRemUnknownTLVType
|
|
}
|
|
::= { lldpRemUnknownTLVTable 1 }
|
|
|
|
LldpRemUnknownTLVEntry ::= SEQUENCE {
|
|
lldpRemUnknownTLVType Integer32,
|
|
lldpRemUnknownTLVInfo OCTET STRING
|
|
}
|
|
|
|
lldpRemUnknownTLVType OBJECT-TYPE
|
|
SYNTAX Integer32(9..126)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the value extracted from the type
|
|
field of the TLV."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 10.3.5"
|
|
::= { lldpRemUnknownTLVEntry 1 }
|
|
|
|
lldpRemUnknownTLVInfo OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..511))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the value extracted from the value
|
|
field of the TLV."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 10.3.5"
|
|
::= { lldpRemUnknownTLVEntry 2 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- Remote Systems Extension Table - Organizationally-Defined Information
|
|
------------------------------------------------------------------------------
|
|
lldpRemOrgDefInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpRemOrgDefInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains one or more rows per physical network
|
|
connection which advertises the organizationally defined
|
|
information.
|
|
Note that this table contains one or more rows of
|
|
organizationally defined information that is not recognized
|
|
by the local agent.
|
|
If the local system is capable of recognizing any
|
|
organizationally defined information, appropriate extension
|
|
MIBs from the organization should be used for information
|
|
retrieval."
|
|
::= { lldpRemoteSystemsData 4 }
|
|
|
|
lldpRemOrgDefInfoEntry OBJECT-TYPE
|
|
SYNTAX LldpRemOrgDefInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about the unrecognized organizationally
|
|
defined information advertised by the remote system.
|
|
The lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex,
|
|
lldpRemOrgDefInfoOUI, lldpRemOrgDefInfoSubtype, and
|
|
lldpRemOrgDefInfoIndex are indexes to this table. If there is
|
|
an lldpRemOrgDefInfoEntry associated with a particular remote
|
|
system identified by the lldpRemLocalPortNum and lldpRemIndex,
|
|
there must be an lldpRemEntry associated with the same
|
|
instance (i.e, using same indexes.) When the lldpRemEntry
|
|
for the same index is removed from the lldpRemTable, the
|
|
associated lldpRemOrgDefInfoEntry should be removed from
|
|
the lldpRemOrgDefInfoTable.
|
|
Entries may be created and deleted in this table by the
|
|
agent."
|
|
INDEX { lldpRemTimeMark,
|
|
lldpRemLocalPortNum,
|
|
lldpRemIndex,
|
|
lldpRemOrgDefInfoOUI,
|
|
lldpRemOrgDefInfoSubtype,
|
|
lldpRemOrgDefInfoIndex }
|
|
::= { lldpRemOrgDefInfoTable 1 }
|
|
|
|
LldpRemOrgDefInfoEntry ::= SEQUENCE {
|
|
lldpRemOrgDefInfoOUI OCTET STRING,
|
|
lldpRemOrgDefInfoSubtype Integer32,
|
|
lldpRemOrgDefInfoIndex Integer32,
|
|
lldpRemOrgDefInfo OCTET STRING
|
|
}
|
|
|
|
lldpRemOrgDefInfoOUI OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(3))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Organizationally Unique Identifier (OUI), as defined
|
|
in IEEE Std 802-2001, is a 24 bit (three octets) globally
|
|
unique assigned number referenced by various standards,
|
|
of the information received from the remote system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.6.1.3"
|
|
::= { lldpRemOrgDefInfoEntry 1 }
|
|
|
|
lldpRemOrgDefInfoSubtype OBJECT-TYPE
|
|
SYNTAX Integer32(1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The integer value used to identify the subtype of the
|
|
organizationally defined information received from the
|
|
remote system.
|
|
The subtype value is required to identify different instances
|
|
of organizationally defined information that could not be
|
|
retrieved without a unique identifier that indicates the
|
|
particular type of information contained in the information
|
|
string."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.6.1.4"
|
|
::= { lldpRemOrgDefInfoEntry 2 }
|
|
|
|
lldpRemOrgDefInfoIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents an arbitrary local integer value
|
|
used by this agent to identify a particular unrecognized
|
|
organizationally defined information instance, unique only
|
|
for the lldpRemOrgDefInfoOUI and lldpRemOrgDefInfoSubtype
|
|
from the same remote system.
|
|
An agent is encouraged to assign monotonically increasing
|
|
index values to new entries, starting with one, after each
|
|
reboot. It is considered unlikely that the
|
|
lldpRemOrgDefInfoIndex will wrap between reboots."
|
|
::= { lldpRemOrgDefInfoEntry 3 }
|
|
|
|
lldpRemOrgDefInfo OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..507))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the organizationally
|
|
defined information of the remote system. The encoding for
|
|
this object should be as defined for SnmpAdminString TC."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 9.6.1.5"
|
|
::= { lldpRemOrgDefInfoEntry 4 }
|
|
|
|
--
|
|
-- ***********************************************************
|
|
--
|
|
-- L L D P M I B N O T I F I C A T I O N S
|
|
--
|
|
-- ***********************************************************
|
|
--
|
|
lldpNotificationPrefix OBJECT IDENTIFIER ::= { lldpNotifications 0 }
|
|
lldpRemTablesChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
lldpStatsRemTablesInserts,
|
|
lldpStatsRemTablesDeletes,
|
|
lldpStatsRemTablesDrops,
|
|
lldpStatsRemTablesAgeouts
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A lldpRemTablesChange notification is sent when the value
|
|
of lldpStatsRemTableLastChangeTime changes. It can be
|
|
utilized by an NMS to trigger LLDP remote systems table
|
|
maintenance polls.
|
|
Note that transmission of lldpRemTablesChange
|
|
notifications are throttled by the agent, as specified by the
|
|
'lldpNotificationInterval' object."
|
|
::= { lldpNotificationPrefix 1 }
|
|
|
|
--
|
|
-- ***********************************************************
|
|
--
|
|
-- L L D P M I B C O N F O R M A N C E
|
|
--
|
|
-- ***********************************************************
|
|
--
|
|
|
|
lldpCompliances OBJECT IDENTIFIER ::= { lldpConformance 1 }
|
|
lldpGroups OBJECT IDENTIFIER ::= { lldpConformance 2 }
|
|
-- compliance statements
|
|
lldpCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for SNMP entities which implement
|
|
the LLDP MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { lldpConfigGroup,
|
|
lldpConfigRxGroup,
|
|
lldpConfigTxGroup,
|
|
lldpStatsRxGroup,
|
|
lldpStatsTxGroup,
|
|
lldpLocSysGroup,
|
|
lldpRemSysGroup,
|
|
lldpNotificationsGroup
|
|
}
|
|
::= { lldpCompliances 1 }
|
|
|
|
-- MIB groupings
|
|
lldpConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
lldpPortConfigAdminStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to configure the
|
|
LLDP implementation behavior.
|
|
This group is mandatory for agents which implement the LLDP."
|
|
::= { lldpGroups 1 }
|
|
|
|
lldpConfigRxGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
lldpNotificationInterval,
|
|
lldpPortConfigNotificationEnable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to configure the
|
|
LLDP implementation behavior.
|
|
This group is mandatory for agents which implement the LLDP
|
|
and have the capability of receiving LLDP frames."
|
|
::= { lldpGroups 2 }
|
|
|
|
lldpConfigTxGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
lldpMessageTxInterval,
|
|
lldpMessageTxHoldMultiplier,
|
|
lldpReinitDelay,
|
|
lldpTxDelay,
|
|
lldpPortConfigTLVsTxEnable,
|
|
lldpConfigManAddrPortsTxEnable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to configure the
|
|
LLDP implementation behavior.
|
|
This group is mandatory for agents which implement the LLDP
|
|
and have the capability of transmitting LLDP frames."
|
|
::= { lldpGroups 3 }
|
|
|
|
lldpStatsRxGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
lldpStatsRemTablesLastChangeTime,
|
|
lldpStatsRemTablesInserts,
|
|
lldpStatsRemTablesDeletes,
|
|
lldpStatsRemTablesDrops,
|
|
lldpStatsRemTablesAgeouts,
|
|
lldpStatsRxPortFramesDiscardedTotal,
|
|
lldpStatsRxPortFramesErrors,
|
|
lldpStatsRxPortFramesTotal,
|
|
lldpStatsRxPortTLVsDiscardedTotal,
|
|
lldpStatsRxPortTLVsUnrecognizedTotal,
|
|
lldpStatsRxPortAgeoutsTotal
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent LLDP
|
|
reception statistics.
|
|
This group is mandatory for agents which implement the LLDP
|
|
and have the capability of receiving LLDP frames."
|
|
::= { lldpGroups 4 }
|
|
|
|
lldpStatsTxGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
lldpStatsTxPortFramesTotal
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent LLDP
|
|
transmission statistics.
|
|
This group is mandatory for agents which implement the LLDP
|
|
and have the capability of transmitting LLDP frames."
|
|
::= { lldpGroups 5 }
|
|
|
|
lldpLocSysGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
lldpLocChassisIdSubtype,
|
|
lldpLocChassisId,
|
|
lldpLocPortIdSubtype,
|
|
lldpLocPortId,
|
|
lldpLocPortDesc,
|
|
lldpLocSysDesc,
|
|
lldpLocSysName,
|
|
lldpLocSysCapSupported,
|
|
lldpLocSysCapEnabled,
|
|
lldpLocManAddrLen,
|
|
lldpLocManAddrIfSubtype,
|
|
lldpLocManAddrIfId,
|
|
lldpLocManAddrOID
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent LLDP
|
|
Local System Information.
|
|
This group is mandatory for agents which implement the LLDP
|
|
and have the capability of transmitting LLDP frames."
|
|
::= { lldpGroups 6 }
|
|
|
|
lldpRemSysGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
lldpRemChassisIdSubtype,
|
|
lldpRemChassisId,
|
|
lldpRemPortIdSubtype,
|
|
lldpRemPortId,
|
|
lldpRemPortDesc,
|
|
lldpRemSysName,
|
|
lldpRemSysDesc,
|
|
lldpRemSysCapSupported,
|
|
lldpRemSysCapEnabled,
|
|
lldpRemManAddrIfSubtype,
|
|
lldpRemManAddrIfId,
|
|
lldpRemManAddrOID,
|
|
lldpRemUnknownTLVInfo,
|
|
lldpRemOrgDefInfo
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent
|
|
LLDP Remote Systems Information. The objects represent the
|
|
information associated with the basic TLV set. Please note
|
|
that even the agent doesn't implement some of the optional
|
|
TLVs, it shall recognize all the optional TLV information
|
|
that the remote system may advertise.
|
|
This group is mandatory for agents which implement the LLDP
|
|
and have the capability of receiving LLDP frames."
|
|
::= { lldpGroups 7 }
|
|
|
|
lldpNotificationsGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
lldpRemTablesChange
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of notifications used to indicate LLDP MIB
|
|
data consistency and general status information.
|
|
This group is mandatory for agents which implement the LLDP
|
|
and have the capability of receiving LLDP frames."
|
|
::= { lldpGroups 8 }
|
|
END
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|