x
/
compass-core
Code Issues Proposed changes
compass-core/mibs/HUAWEI-ACL-MIB.mib

3695 lines
134 KiB
Plaintext
Raw Blame History

-- ====================================================================
-- Copyright (C) 2003 by HUAWEI TECHNOLOGIES. All rights reserved.
--
-- Description: Huawei Acl MIB Definition
-- Reference: Huawei Enterprise MIB
-- Version: V2.0
-- History:
-- Wang Ning,2002-11-29,Reunification version based on the Fix-Net MIBs
-- baseline by the MIB Standard community.
-- Version: V2.1
-- History:
-- Yang Hongjie,2003-04-11,Reunification version based on V2.0.
-- Version: V2.2
-- History:
-- Yang Yuhui,2004-05-17,Reunification version based on V2.1.
-- Version: V2.3
-- History:
-- Xu xinjun, 2009-04-13.
-- 1, Add five new rule tables based on V2.2.
-- hwAclEthernetFrameRuleTable, hwAclIpv6BasicRuleTable,
-- hwAclIpv6AdvanceRuleTable, hwAclIpv6NumGroupTable,
-- hwAclIpv6IfRuleTable.
-- 2, Change Name-ACL range from [42768..45767] to [42768..59151]
-- ========================================================================
HUAWEI-ACL-MIB DEFINITIONS ::= BEGIN
IMPORTS
huaweiMgmt
FROM HUAWEI-MIB
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
IpAddress, Integer32, Unsigned32, Gauge32, Counter32, OBJECT-TYPE, Counter64,
MODULE-IDENTITY
FROM SNMPv2-SMI
RowStatus, TruthValue, MacAddress FROM SNMPv2-TC
EnabledStatus FROM P-BRIDGE-MIB
Ipv6Address FROM IPV6-TC;
hwAcl MODULE-IDENTITY
LAST-UPDATED "200904131600Z" -- April 13, 2009 at 09:00 GMT
ORGANIZATION
"Huawei Technologies Co., Ltd."
CONTACT-INFO
"R&D BeiJing, Huawei Technologies co.,Ltd.
Huawei Bld.,NO.3 Xinxi Rd.,
Shang-Di Information Industry Base,
Hai-Dian District Beijing P.R. China
Zip:100085
Http://www.huawei.com
E-mail:support@huawei.com"
DESCRIPTION
"The HUAWEI-ACL-MIB contains objects to configure ACL module,
including ACL group, rule and acl accelerate,
and query the current ACL configuration and status.
This MIB module objects indicate hwAclNumGroupTable, hwAclBasicRuleTable,
hwAclAdvanceRuleTable, hwAclIfRuleTable, hwAclEthernetFrameRuleTable,
hwAclIpv6BasicRuleTable, hwAclIpv6AdvanceRuleTable, hwAclIpv6IfRuleTable,
hwAclCompileEnableFlag, hwAclCompileNumGroupTable,
hwAclIpv6NumGroupTable and acl trap.
To filter data packets, a series of rules need to be configured
on the device. These rules are defined by ACL (Access Control List),
which are a series of sequential rules consisting of rule
permit or deny statements. The rules are described by source
address, destination address and port number of data packets.
ACL classifies data packets through these device interface applied
rules, by which the device decides which packets can be received
and which should be rejected."
::= { huaweiMgmt 1 }
--
-- Node definitions
--
-- 1.3.6.1.4.1.2011.5.1.1
hwAclMibObjects OBJECT IDENTIFIER ::= { hwAcl 1 }
-- 1.3.6.1.4.1.2011.5.1.1.2
hwAclNumGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAclNumGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of ACL group information including
match order, step, description and so on"
::= { hwAclMibObjects 2 }
-- 1.3.6.1.4.1.2011.5.1.1.2.1
hwAclNumGroupEntry OBJECT-TYPE
SYNTAX HwAclNumGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing characters of an acl group "
INDEX { hwAclNumGroupAclNum }
::= { hwAclNumGroupTable 1 }
HwAclNumGroupEntry ::=
SEQUENCE {
hwAclNumGroupAclNum
Integer32,
hwAclNumGroupMatchOrder
INTEGER,
hwAclNumGroupSubitemNum
Counter32,
hwAclNumGroupStep
Integer32,
hwAclNumGroupDescription
OCTET STRING,
hwAclNumGroupCountClear
INTEGER,
hwAclNumGroupRowStatus
RowStatus,
hwAclNumGroupAclName
OCTET STRING,
hwAclNumGroupAclType
INTEGER
}
-- 1.3.6.1.4.1.2011.5.1.1.2.1.1
hwAclNumGroupAclNum OBJECT-TYPE
SYNTAX Integer32 (700..799|1000..3999|4000..4999|5000..5999|6000..9999|10000..10999|42768..75535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of acl group, identifying an ACL.
The object specifies the range of an ACL number.
The basic ACL is represented by the number
in the range 2000 through 2999. The advanced ACL is
represented by the number in the range 3000 through
3999. The interface-based ACL is represented by the
number in the range 1000 to 1999. The User Defined ACL is
represented by the number in the range 5000 through
5999. The User ACL is represented by the number in the range 6000 through
9999. The Mpls ACL is represented by the number in the range 10000 through
10999. The name ACL is represented by the number
in the range 42768 through 75535."
::= { hwAclNumGroupEntry 1 }
-- 1.3.6.1.4.1.2011.5.1.1.2.1.2
hwAclNumGroupMatchOrder OBJECT-TYPE
SYNTAX INTEGER
{
config(1),
auto(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the match order of rules.
'config' means matching ACL rules in the configuration sequence,
'auto' means the ACL rules are matched following the 'Depth-first' principle."
DEFVAL { config }
::= { hwAclNumGroupEntry 2 }
-- 1.3.6.1.4.1.2011.5.1.1.2.1.3
hwAclNumGroupSubitemNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the rules in the acl group."
::= { hwAclNumGroupEntry 3 }
-- 1.3.6.1.4.1.2011.5.1.1.2.1.4
hwAclNumGroupStep OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the step value of number acl.
Step here refers to the difference between each ID.
For instance, given the step is set to 5,
the IDs are the multiples of 5 beginning with 5.
The ACL IDs change along with the step. When the step is 5,
the ACL IDs are 5, 10, and 15 and so on.
However, when the step is set to 2, the IDs turn to 2, 4,
and 6 and so on."
::= { hwAclNumGroupEntry 4 }
-- 1.3.6.1.4.1.2011.5.1.1.2.1.5
hwAclNumGroupDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..127))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the description of this acl group.
The object describes the usage of an ACL with a word or a sentence."
::= { hwAclNumGroupEntry 5 }
-- 1.3.6.1.4.1.2011.5.1.1.2.1.6
hwAclNumGroupCountClear OBJECT-TYPE
SYNTAX INTEGER
{
cleared(1),
notUsed(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Reset the statistics of ACL group."
::= { hwAclNumGroupEntry 6 }
-- 1.3.6.1.4.1.2011.5.1.1.2.1.7
hwAclNumGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus, Now support three value:CreateAndGo,Active,Destroy."
::= { hwAclNumGroupEntry 7 }
-- 1.3.6.1.4.1.2011.5.1.1.2.1.8
hwAclNumGroupAclName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the name of an acl group,
The first character must be start with a to z or A to Z,
and the length cannot exceed 32 character."
::= { hwAclNumGroupEntry 8 }
-- 1.3.6.1.4.1.2011.5.1.1.2.1.9
hwAclNumGroupAclType OBJECT-TYPE
SYNTAX INTEGER
{
basic(1),
advanced(2),
link(3),
user(4),
interface(5),
mpls(6),
mac(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of ACL group."
::= { hwAclNumGroupEntry 9 }
-- 1.3.6.1.4.1.2011.5.1.1.4
hwAclBasicRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAclBasicRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure the rule for basic acl group."
::= { hwAclMibObjects 4 }
-- 1.3.6.1.4.1.2011.5.1.1.4.1
hwAclBasicRuleEntry OBJECT-TYPE
SYNTAX HwAclBasicRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry is a rule of basic acl."
INDEX { hwAclBasicAclNum, hwAclBasicSubitem }
::= { hwAclBasicRuleTable 1 }
HwAclBasicRuleEntry ::=
SEQUENCE {
hwAclBasicAclNum
Integer32,
hwAclBasicSubitem
Unsigned32,
hwAclBasicAct
INTEGER,
hwAclBasicSrcIp
IpAddress,
hwAclBasicSrcWild
IpAddress,
hwAclBasicTimeRangeIndex
Integer32,
hwAclBasicFragments
INTEGER,
hwAclBasicLog
TruthValue,
hwAclBasicEnable
TruthValue,
hwAclBasicCount
Counter64,
hwAclBasicVrfName
OCTET STRING,
hwAclBasicRowStatus
RowStatus,
hwAclBasicDescription
OCTET STRING
}
-- 1.3.6.1.4.1.2011.5.1.1.4.1.1
hwAclBasicAclNum OBJECT-TYPE
SYNTAX Integer32 (1..99 | 2000..2999 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of basic acl group"
::= { hwAclBasicRuleEntry 1 }
-- 1.3.6.1.4.1.2011.5.1.1.4.1.2
hwAclBasicSubitem OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The objects specifies the number of an ACL rule.
If the number specified has been assigned to an ACL rule,
the new rule will overwrite the old one,
which is equal to editing the old rule.
If the number is not assigned, the system will define
a rule with the number and insert it to the place
corresponding to its number. If no number is specified,
the system will define a rule, assign a number to it and
add it into the ACL. It will be placed at the end of the
ACL when configuration sequence is adopted; otherwise,
it will be placed based on the 'Depth-first' principle.
When ACL rules are following the 'Depth-first' principle,
the number of an ACL rule must be given 0 ,but it will be assigned
by step automatically;otherwise,this rule will not be created."
::= { hwAclBasicRuleEntry 2 }
-- 1.3.6.1.4.1.2011.5.1.1.4.1.3
hwAclBasicAct OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the action of a basic acl rule.
'deny' means discarding the packets that meet the condition,
'permit' means permitting the packets that meet the condition."
::= { hwAclBasicRuleEntry 3 }
-- 1.3.6.1.4.1.2011.5.1.1.4.1.4
hwAclBasicSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the source IP-address of a basic acl rule."
::= { hwAclBasicRuleEntry 4 }
-- 1.3.6.1.4.1.2011.5.1.1.4.1.5
hwAclBasicSrcWild OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the source IP-address wild of a basic acl rule."
::= { hwAclBasicRuleEntry 5 }
-- 1.3.6.1.4.1.2011.5.1.1.4.1.6
hwAclBasicTimeRangeIndex OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the time range of a basic acl rule.
When the current time is in time range, the rule is valid.
Zero value declares that the acl rule has no time range.
The invalid value is 0."
::= { hwAclBasicRuleEntry 6 }
-- 1.3.6.1.4.1.2011.5.1.1.4.1.7
hwAclBasicFragments OBJECT-TYPE
SYNTAX INTEGER
{
fragmentSubseq(0),
fragment(1),
nonFragment(2),
nonSubseq(3),
fragmentSpeFirst(4),
none(255)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the type of the packet.
0: fragmentSubseq, indicating that the packet is a subsequent fragment
1: fragment, indicating that the packet is a fragment
2: nonFragment, indicating that the packet is not a fragment
3: nonSubseq, indicating that the packet is not a subsequent fragment
4: fragmentSpeFirst, indicating that the packet is the first fragment
255: none, invalid value
This object cannot be modified once a rule is created."
::= { hwAclBasicRuleEntry 7 }
-- 1.3.6.1.4.1.2011.5.1.1.4.1.8
hwAclBasicLog OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates whether to log the matched packets.
The log contents include sequence number of ACL rule, packets passed
or discarded, upper layer protocol type over IP, source/destination
address, source/destination port number, and number of packets."
::= { hwAclBasicRuleEntry 8 }
-- 1.3.6.1.4.1.2011.5.1.1.4.1.9
hwAclBasicEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates whether the rule is valid or invalid."
::= { hwAclBasicRuleEntry 9 }
-- 1.3.6.1.4.1.2011.5.1.1.4.1.10
hwAclBasicCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the statistics of matched packets by the rule."
::= { hwAclBasicRuleEntry 10 }
-- 1.3.6.1.4.1.2011.5.1.1.4.1.11
hwAclBasicVrfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the VRF name of this rule.
It specifies the VPN-instance to which the packet belongs."
::= { hwAclBasicRuleEntry 11 }
-- 1.3.6.1.4.1.2011.5.1.1.4.1.12
hwAclBasicRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus, Now support three value:CreateAndGo,Active and Destroy."
::= { hwAclBasicRuleEntry 12 }
-- 1.3.6.1.4.1.2011.5.1.1.4.1.13
hwAclBasicDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..127))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the description of this basic rule.
The object describes the usage of an ACL with a word or a sentence."
::= { hwAclBasicRuleEntry 13 }
-- 1.3.6.1.4.1.2011.5.1.1.5
hwAclAdvancedRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAclAdvancedRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure the rule for advanced acl group."
::= { hwAclMibObjects 5 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1
hwAclAdvancedRuleEntry OBJECT-TYPE
SYNTAX HwAclAdvancedRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains a rule of advanced acl group."
INDEX { hwAclAdvancedAclNum, hwAclAdvancedSubitem }
::= { hwAclAdvancedRuleTable 1 }
HwAclAdvancedRuleEntry ::=
SEQUENCE {
hwAclAdvancedAclNum
Integer32,
hwAclAdvancedSubitem
Unsigned32,
hwAclAdvancedAct
INTEGER,
hwAclAdvancedProtocol
Integer32,
hwAclAdvancedSrcIp
IpAddress,
hwAclAdvancedSrcWild
IpAddress,
hwAclAdvancedSrcOp
INTEGER,
hwAclAdvancedSrcPort1
Integer32,
hwAclAdvancedSrcPort2
Integer32,
hwAclAdvancedDestIp
IpAddress,
hwAclAdvancedDestWild
IpAddress,
hwAclAdvancedDestOp
INTEGER,
hwAclAdvancedDestPort1
Integer32,
hwAclAdvancedDestPort2
Integer32,
hwAclAdvancedPrecedence
Integer32,
hwAclAdvancedTos
Integer32,
hwAclAdvancedDscp
Integer32,
hwAclAdvancedEstablish
TruthValue,
hwAclAdvancedTimeRangeIndex
Integer32,
hwAclAdvancedIcmpType
Integer32,
hwAclAdvancedIcmpCode
Integer32,
hwAclAdvancedFragments
INTEGER,
hwAclAdvancedLog
TruthValue,
hwAclAdvancedEnable
TruthValue,
hwAclAdvancedCount
Counter64,
hwAclAdvancedVrfName
OCTET STRING,
hwAclAdvancedRowStatus
RowStatus,
hwAclAdvancedTcpSyncFlag
Integer32,
hwAclAdvancedDescription
OCTET STRING
}
-- 1.3.6.1.4.1.2011.5.1.1.5.1.1
hwAclAdvancedAclNum OBJECT-TYPE
SYNTAX Integer32 (100..199 | 3000..3999 | 42768..75535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of advanced acl table."
::= { hwAclAdvancedRuleEntry 1 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1.2
hwAclAdvancedSubitem OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object specifies the number of an advanced ACL rule.
If the number specified has been assigned to an ACL rule,
the new rule will overwrite the old one,
which is equal to editing the old rule.
If the number is not assigned, the system will define
a rule with the number and insert it to the place
corresponding to its number. If no number is specified,
the system will define a rule, assign a number to it and
add it into the ACL. It will be placed at the end of the
ACL when configuration sequence is adopted; otherwise,
it will be placed based on the 'Depth-first' principle.
When ACL rules are following the 'Depth-first' principle,
the number of an ACL rule must be given 0 ,but it will be assigned
by step automatically;otherwise,this rule will not be created."
::= { hwAclAdvancedRuleEntry 2 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1.3
hwAclAdvancedAct OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the action of an advanced acl rule.
'deny' means discarding the packets that meet the condition,
'permit' means permitting the packets that meet the condition."
::= { hwAclAdvancedRuleEntry 3 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1.4
hwAclAdvancedProtocol OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the protocol type of the rule.
It specifies the protocol type over IP.The number of IP protocol is 0."
::= { hwAclAdvancedRuleEntry 4 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1.5
hwAclAdvancedSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the source IP-address of an advanced acl rule."
::= { hwAclAdvancedRuleEntry 5 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1.6
hwAclAdvancedSrcWild OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the source IP-address wild of an advanced acl rule."
::= { hwAclAdvancedRuleEntry 6 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1.7
hwAclAdvancedSrcOp OBJECT-TYPE
SYNTAX INTEGER
{
lt(1),
eq(2),
gt(3),
neq(4),
invalid(0),
range(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the source Port operation symbol of an advanced acl
rule. It compares the port operators of source address.
'lt' means less than,
'eq' means equal to,
'gt' means greater than,
'neq' means not equal to,
'range' means between,
'invalid' means this operation of the rule is invalid."
::= { hwAclAdvancedRuleEntry 7 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1.8
hwAclAdvancedSrcPort1 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the fourth layer sourec port 1.
It specifies the source port information of UDP or TCP packets."
::= { hwAclAdvancedRuleEntry 8 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1.9
hwAclAdvancedSrcPort2 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the fourth layer source port2."
::= { hwAclAdvancedRuleEntry 9 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1.10
hwAclAdvancedDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the destination IP-address of an advanced acl rule."
::= { hwAclAdvancedRuleEntry 10 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1.11
hwAclAdvancedDestWild OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the destination IP-address wild of an advanced acl rule."
::= { hwAclAdvancedRuleEntry 11 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1.12
hwAclAdvancedDestOp OBJECT-TYPE
SYNTAX INTEGER
{
lt(1),
eq(2),
gt(3),
neq(4),
invalid(0),
range(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the destination Port operation symbol of an advanced
acl group. It compares the port operators of destination address.
'lt' means less than,
'eq' means equal to,
'gt' means greater than,
'neq' means not equal to,
'range' means between,
'invalid' means this operation of the rule is invalid."
::= { hwAclAdvancedRuleEntry 12 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1.13
hwAclAdvancedDestPort1 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the fourth layer destination port1."
::= { hwAclAdvancedRuleEntry 13 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1.14
hwAclAdvancedDestPort2 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the fourth layer destination port2."
::= { hwAclAdvancedRuleEntry 14 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1.15
hwAclAdvancedPrecedence OBJECT-TYPE
SYNTAX Integer32 (0..7|255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the value of IP-packet's precedence,
It filters packets according to precedence field.The invalid
value is 255."
::= { hwAclAdvancedRuleEntry 15 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1.16
hwAclAdvancedTos OBJECT-TYPE
SYNTAX Integer32 (0..15|255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the value of IP-packet's TOS,
It filters packets according to type of service.The invalid
value is 255."
::= { hwAclAdvancedRuleEntry 16 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1.17
hwAclAdvancedDscp OBJECT-TYPE
SYNTAX Integer32 (0..63|255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the value of frame.The invalid
value is 255."
::= { hwAclAdvancedRuleEntry 17 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1.18
hwAclAdvancedEstablish OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates whether or not establishing."
DEFVAL { False }
::= { hwAclAdvancedRuleEntry 18 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1.19
hwAclAdvancedTimeRangeIndex OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the time range of an advanced acl rule.
When the current time is in the time range, the rule is valid.
Zero value declares that the acl rule has no time range.The
invalid value is 0."
::= { hwAclAdvancedRuleEntry 19 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1.20
hwAclAdvancedIcmpType OBJECT-TYPE
SYNTAX Integer32 (0..255|65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the type of ICMP packet.
It filters ICMP packets according to the ICMP message type.
The invalid value is 65535."
::= { hwAclAdvancedRuleEntry 20 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1.21
hwAclAdvancedIcmpCode OBJECT-TYPE
SYNTAX Integer32 (0..255|65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the code of ICMP packet.
It filters ICMP packets according to the message code.
The invalid value is 65535."
::= { hwAclAdvancedRuleEntry 21 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1.22
hwAclAdvancedFragments OBJECT-TYPE
SYNTAX INTEGER
{
fragmentSubseq(0),
fragment(1),
nonFragment(2),
nonSubseq(3),
fragmentSpeFirst(4),
none(255)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the type of the packet.
0: fragmentSubseq, indicating that the packet is a subsequent fragment
1: fragment, indicating that the packet is a fragment
2: nonFragment, indicating that the packet is not a fragment
3: nonSubseq, indicating that the packet is not a subsequent fragment
4: fragmentSpeFirst, indicating that the packet is the first fragment
255: none, invalid value
This object cannot be modified once a rule is created."
::= { hwAclAdvancedRuleEntry 22 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1.23
hwAclAdvancedLog OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates whether to log the matched packets. The log
contents include sequence number of ACL rule,
packets passed or discarded, upper layer protocol type over IP,
source/destination address, source/destination port number,
and number of packets"
::= { hwAclAdvancedRuleEntry 23 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1.24
hwAclAdvancedEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates whether the rule is valid or invalid."
::= { hwAclAdvancedRuleEntry 24 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1.25
hwAclAdvancedCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the statistics of matched packets by the rule."
::= { hwAclAdvancedRuleEntry 25 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1.26
hwAclAdvancedVrfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the VRF name of this rule,
It specifies the VPN-instance to which the packet belongs."
::= { hwAclAdvancedRuleEntry 26 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1.27
hwAclAdvancedRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus, Now support three state:CreateAndGo,Active,Destroy."
::= { hwAclAdvancedRuleEntry 27 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1.28
hwAclAdvancedTcpSyncFlag OBJECT-TYPE
SYNTAX Integer32 (-1|0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the code of TCP Sync flag(0~63),
The invalid value is -1."
::= { hwAclAdvancedRuleEntry 28 }
-- 1.3.6.1.4.1.2011.5.1.1.5.1.29
hwAclAdvancedDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..127))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the description of this advanced rule.
The object describes the usage of an ACL with a word or a sentence."
::= { hwAclAdvancedRuleEntry 29 }
-- 1.3.6.1.4.1.2011.5.1.1.6
hwAclIfRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAclIfRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure the rule for interface-based acl group."
::= { hwAclMibObjects 6 }
-- 1.3.6.1.4.1.2011.5.1.1.6.1
hwAclIfRuleEntry OBJECT-TYPE
SYNTAX HwAclIfRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains a rule of interface-based acl group."
INDEX { hwAclIfAclNum, hwAclIfSubitem }
::= { hwAclIfRuleTable 1 }
HwAclIfRuleEntry ::=
SEQUENCE {
hwAclIfAclNum
Integer32,
hwAclIfSubitem
Unsigned32,
hwAclIfAct
INTEGER,
hwAclIfIndex
Integer32,
hwAclIfAny
TruthValue,
hwAclIfTimeRangeIndex
Integer32,
hwAclIfLog
TruthValue,
hwAclIfEnable
TruthValue,
hwAclIfCount
Counter64,
hwAclIfRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.5.1.1.6.1.1
hwAclIfAclNum OBJECT-TYPE
SYNTAX Integer32 (1000..1999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of interface-based acl group."
::= { hwAclIfRuleEntry 1 }
-- 1.3.6.1.4.1.2011.5.1.1.6.1.2
hwAclIfSubitem OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object specifies the number of an ACL rule.
If the number specified has been assigned to an ACL rule,
the new rule will overwrite the old one,
which is equal to editing the old rule.
If the number is not assigned, the system will define
a rule with the number and insert it to the place
corresponding to its number. If no number is specified,
the system will define a rule, assign a number to it and
add it into the ACL. It will be placed at the end of the
ACL when configuration sequence is adopted; otherwise,
it will be placed based on the 'Depth-first' principle.
When ACL rules are following the 'Depth-first' principle,
the number of an ACL rule must be given 0 ,but it will be assigned
by step automatically;otherwise,this rule will not be created."
::= { hwAclIfRuleEntry 2 }
-- 1.3.6.1.4.1.2011.5.1.1.6.1.3
hwAclIfAct OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the action of an interface-based acl rule.
'deny' means discarding the packets that meet the condition,
'permit' means permitting the packets that meet the condition."
::= { hwAclIfRuleEntry 3 }
-- 1.3.6.1.4.1.2011.5.1.1.6.1.4
hwAclIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the index of an interface.
It specifies the interface information of the packets.The invalid
interface index is 0."
::= { hwAclIfRuleEntry 4 }
-- 1.3.6.1.4.1.2011.5.1.1.6.1.5
hwAclIfAny OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates whether or not matching any interface."
::= { hwAclIfRuleEntry 5 }
-- 1.3.6.1.4.1.2011.5.1.1.6.1.6
hwAclIfTimeRangeIndex OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the time range of an interface-based acl rule.
when the current time is in time range, the rule is valid.
Zero value declares that the acl rule has no time range.
The invalid value is 0."
::= { hwAclIfRuleEntry 6 }
-- 1.3.6.1.4.1.2011.5.1.1.6.1.7
hwAclIfLog OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates whether to log the matched packets.
The log contents include sequence number of ACL rule,
packets passed or discarded, upper layer protocol type over IP,
source/destination address, source/destination port number,
and number of packets."
::= { hwAclIfRuleEntry 7 }
-- 1.3.6.1.4.1.2011.5.1.1.6.1.8
hwAclIfEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates whether the rule is valid or invalid."
::= { hwAclIfRuleEntry 8 }
-- 1.3.6.1.4.1.2011.5.1.1.6.1.9
hwAclIfCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the statistics of matched packets by the rule."
::= { hwAclIfRuleEntry 9 }
-- 1.3.6.1.4.1.2011.5.1.1.6.1.11
hwAclIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus,Now support three state:CreateAndGo,Active,Destroy."
::= { hwAclIfRuleEntry 11 }
--user acl
-- 1.3.6.1.4.1.2011.5.1.1.7
hwAclUserRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAclUserRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure the rule for user acl group."
::= { hwAclMibObjects 7 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1
hwAclUserRuleEntry OBJECT-TYPE
SYNTAX HwAclUserRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains a rule of user acl group."
INDEX { hwAclUserAclNum, hwAclUserSubitem }
::= { hwAclUserRuleTable 1 }
HwAclUserRuleEntry ::=
SEQUENCE {
hwAclUserAclNum
Integer32,
hwAclUserSubitem
Integer32,
hwAclUserAct
INTEGER,
hwAclUserProtocol
Integer32,
hwAclUserSrcIp
IpAddress,
hwAclUserSrcWild
IpAddress,
hwAclUserSrcOp
INTEGER,
hwAclUserSrcPort1
Integer32,
hwAclUserSrcPort2
Integer32,
hwAclUserDestIp
IpAddress,
hwAclUserDestWild
IpAddress,
hwAclUserDestOp
INTEGER,
hwAclUserDestPort1
Integer32,
hwAclUserDestPort2
Integer32,
hwAclUserPrecedence
Integer32,
hwAclUserTos
Integer32,
hwAclUserDscp
Integer32,
hwAclUserEstablish
TruthValue,
hwAclUserTimeRangeIndex
Integer32,
hwAclUserIcmpType
Integer32,
hwAclUserIcmpCode
Integer32,
hwAclUserFragments
TruthValue,
hwAclUserLog
TruthValue,
hwAclUserEnable
TruthValue,
hwAclUserCount
Counter32,
hwAclUserVrfName
OCTET STRING,
hwAclUserSrcUserGroupName
OCTET STRING,
hwAclUserDestUserGroupName
OCTET STRING,
hwAclUserSrcModeType
Integer32,
hwAclUserDestModeType
Integer32,
hwAclUserRowStatus
RowStatus,
hwAclUserTcpSyncFlag
Integer32
}
-- 1.3.6.1.4.1.2011.5.1.1.7.1.1
hwAclUserAclNum OBJECT-TYPE
SYNTAX Integer32 (6000..9999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of user acl table."
::= { hwAclUserRuleEntry 1 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.2
hwAclUserSubitem OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object specifies the number of an User ACL rule.
If the number specified has been assigned to an ACL rule,
the new rule will overwrite the old one,
which is equal to editing the old rule.
If the number is not assigned, the system will define
a rule with the number and insert it to the place
corresponding to its number. If no number is specified,
the system will define a rule, assign a number to it and
add it into the ACL. It will be placed at the end of the
ACL when configuration sequence is adopted; otherwise,
it will be placed based on the 'Depth-first' principle"
::= { hwAclUserRuleEntry 2 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.3
hwAclUserAct OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the action of an User acl rule.
'deny' means discarding the packets that meet the condition,
'permit' means permitting the packets that meet the condition."
::= { hwAclUserRuleEntry 3 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.4
hwAclUserProtocol OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the protocol type of the rule.
It specifies the protocol type over IP.The number of IP protocol is 0."
::= { hwAclUserRuleEntry 4 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.5
hwAclUserSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the source IP-address of an User acl rule."
::= { hwAclUserRuleEntry 5 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.6
hwAclUserSrcWild OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the source IP-address wild of an User acl rule."
::= { hwAclUserRuleEntry 6 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.7
hwAclUserSrcOp OBJECT-TYPE
SYNTAX INTEGER
{
lt(1),
eq(2),
gt(3),
neq(4),
invalid(0),
range(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the source Port operation symbol of an User acl
rule. It compares the port operators of source address.
'lt' means less than,
'eq' means equal to,
'gt' means greater than,
'neq' means not equal to,
'range' means between,
'invalid' means this operation of the rule is invalid."
::= { hwAclUserRuleEntry 7 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.8
hwAclUserSrcPort1 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the fourth layer sourec port 1.
It specifies the source port information of UDP or TCP packets."
::= { hwAclUserRuleEntry 8 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.9
hwAclUserSrcPort2 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the fourth layer source port2."
::= { hwAclUserRuleEntry 9 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.10
hwAclUserDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the destination IP-address of an User acl rule."
::= { hwAclUserRuleEntry 10 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.11
hwAclUserDestWild OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the destination IP-address wild of an User acl rule."
::= { hwAclUserRuleEntry 11 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.12
hwAclUserDestOp OBJECT-TYPE
SYNTAX INTEGER
{
lt(1),
eq(2),
gt(3),
neq(4),
invalid(0),
range(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the destination Port operation symbol of an User
acl group. It compares the port operators of destination address.
'lt' means less than,
'eq' means equal to,
'gt' means greater than,
'neq' means not equal to,
'range' means between,
'invalid' means this operation of the rule is invalid."
::= { hwAclUserRuleEntry 12 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.13
hwAclUserDestPort1 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the fourth layer destination port1."
::= { hwAclUserRuleEntry 13 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.14
hwAclUserDestPort2 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the fourth layer destination port2."
::= { hwAclUserRuleEntry 14 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.15
hwAclUserPrecedence OBJECT-TYPE
SYNTAX Integer32 (0..7|255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the value of IP-packet's precedence,
It filters packets according to precedence field.The invalid
value is 255."
::= { hwAclUserRuleEntry 15 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.16
hwAclUserTos OBJECT-TYPE
SYNTAX Integer32 (0..15|255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the value of IP-packet's TOS,
It filters packets according to type of service.The invalid
value is 255."
::= { hwAclUserRuleEntry 16 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.17
hwAclUserDscp OBJECT-TYPE
SYNTAX Integer32 (0..63|255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the value of frame.The invalid
value is 255."
::= { hwAclUserRuleEntry 17 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.18
hwAclUserEstablish OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates whether or not establishing."
DEFVAL { False }
::= { hwAclUserRuleEntry 18 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.19
hwAclUserTimeRangeIndex OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the time range of an User acl rule.
When the current time is in the time range, the rule is valid.
Zero value declares that the acl rule has no time range.The
invalid value is 0."
::= { hwAclUserRuleEntry 19 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.20
hwAclUserIcmpType OBJECT-TYPE
SYNTAX Integer32 (0..255|65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the type of ICMP packet.
It filters ICMP packets according to the ICMP message type.
The invalid value is 65535."
::= { hwAclUserRuleEntry 20 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.21
hwAclUserIcmpCode OBJECT-TYPE
SYNTAX Integer32 (0..255|65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the code of ICMP packet.
It filters ICMP packets according to the message code.
The invalid value is 65535."
::= { hwAclUserRuleEntry 21 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.22
hwAclUserFragments OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates whether or not matching fragmented packet,
It specifies that this rule is only valid for
the non-first fragment packets."
::= { hwAclUserRuleEntry 22 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.23
hwAclUserLog OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates whether to log the matched packets. The log
contents include sequence number of ACL rule,
packets passed or discarded, upper layer protocol type over IP,
source/destination address, source/destination port number,
and number of packets"
::= { hwAclUserRuleEntry 23 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.24
hwAclUserEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates whether the rule is valid or invalid."
::= { hwAclUserRuleEntry 24 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.25
hwAclUserCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the statistics of matched packets by the rule."
::= { hwAclUserRuleEntry 25 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.26
hwAclUserVrfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the VRF name of this rule,
It specifies the VPN-instance to which the packet belongs."
::= { hwAclUserRuleEntry 26 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.27
hwAclUserSrcUserGroupName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the source user group name of this rule.
if modetype source is user, null sting means any user"
::= { hwAclUserRuleEntry 27 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.28
hwAclUserDestUserGroupName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the destination user group name of this rule.
if modetype destination is user, null sting means any user"
::= { hwAclUserRuleEntry 28 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.29
hwAclUserSrcModeType OBJECT-TYPE
SYNTAX Integer32 (0..4)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates ACL's mode type,
Now support four state
0 Any match rule from any user group or any ip subnet,
1 NetAny match rule from any ip subnet,
2 UserAny match rule from any user group,
3 Net match rule from an ip subnet,
4 User match rule from a user group"
::= { hwAclUserRuleEntry 29 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.30
hwAclUserDestModeType OBJECT-TYPE
SYNTAX Integer32 (0..4)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates ACL's mode type,
Now support four state
0 Any match rule from any user group or any ip subnet,
1 NetAny match rule from any ip subnet,
2 UserAny match rule from any user group,
3 Net match rule from an ip subnet,
4 User match rule from a user group"
::= { hwAclUserRuleEntry 30 }
-- 1.3.6.1.4.1.2011.5.1.1.7.1.31
hwAclUserRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus, Now support three state:CreateAndGo,Active,Destroy."
::= { hwAclUserRuleEntry 31 }
hwAclUserTcpSyncFlag OBJECT-TYPE
SYNTAX Integer32 (-1|0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the code of TCP Sync flag(0~63),
The invalid value is -1."
::= { hwAclUserRuleEntry 32 }
-- 1.3.6.1.4.1.2011.5.1.1.10
hwAclCompileEnableFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object indicates whether acl compiler is enabled. when acl compiler
is enabled, and ACL accelerate function is enabled, then matching packets
by rule is efficient."
::= { hwAclMibObjects 10 }
-- 1.3.6.1.4.1.2011.5.1.1.11
hwAclCompileNumGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAclCompileNumGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ACL compiler table extending the Acl-number-group table"
::= { hwAclMibObjects 11 }
-- 1.3.6.1.4.1.2011.5.1.1.11.1
hwAclCompileNumGroupEntry OBJECT-TYPE
SYNTAX HwAclCompileNumGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of Acl-number-group compiler extended table"
AUGMENTS { hwAclNumGroupEntry }
::= { hwAclCompileNumGroupTable 1 }
HwAclCompileNumGroupEntry ::=
SEQUENCE {
hwAclCompileNumGroupStatus
INTEGER
}
-- 1.3.6.1.4.1.2011.5.1.1.11.1.1
hwAclCompileNumGroupStatus OBJECT-TYPE
SYNTAX INTEGER
{
notCompile(1),
compiled(2),
changeAfterCompile(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object indicates the status of Acl-number-group compiler.
'notCompile' means acl accelerate function is disabled,
'compiled' means acl accelerate function is enabled,
'changeAfterCompile' means acl is changed after compiled."
DEFVAL { notCompile }
::= { hwAclCompileNumGroupEntry 1 }
-- 1.3.6.1.4.1.2011.5.1.1.12
hwAclIpv6BasicRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAclIpv6BasicRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure the rule for ipv6 basic acl group."
::= { hwAclMibObjects 12 }
-- 1.3.6.1.4.1.2011.5.1.1.12.1
hwAclIpv6BasicRuleEntry OBJECT-TYPE
SYNTAX HwAclIpv6BasicRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry is a rule of ipv6 basic acl."
INDEX { hwAclIpv6BasicAclNum, hwAclIpv6BasicSubitem }
::= { hwAclIpv6BasicRuleTable 1 }
HwAclIpv6BasicRuleEntry ::=
SEQUENCE {
hwAclIpv6BasicAclNum
Integer32,
hwAclIpv6BasicSubitem
Unsigned32,
hwAclIpv6BasicAct
INTEGER,
hwAclIpv6BasicSrcIp
Ipv6Address,
hwAclIpv6BasicSrcPrefix
Integer32,
hwAclIpv6BasicTimeRangeIndex
Integer32,
hwAclIpv6BasicFragment
INTEGER,
hwAclIpv6BasicLog
TruthValue,
hwAclIpv6BasicEnable
EnabledStatus,
hwAclIpv6BasicCount
Counter64,
hwAclIpv6BasicVrfName
OCTET STRING,
hwAclIpv6BasicRowStatus
RowStatus,
hwAclIpv6BasicDescription
OCTET STRING
}
-- 1.3.6.1.4.1.2011.5.1.1.12.1.1
hwAclIpv6BasicAclNum OBJECT-TYPE
SYNTAX Integer32 (2000..2999 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of ipv6 basic acl group"
::= { hwAclIpv6BasicRuleEntry 1 }
-- 1.3.6.1.4.1.2011.5.1.1.4.1.2
hwAclIpv6BasicSubitem OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The objects specifies the number of an ACL rule.
If the number specified has been assigned to an ACL rule,
the new rule will overwrite the old one,
which is equal to editing the old rule.
If the number is not assigned, the system will define
a rule with the number and insert it to the place
corresponding to its number. If no number is specified,
the system will define a rule, assign a number to it and
add it into the ACL. It will be placed at the end of the
ACL when configuration sequence is adopted; otherwise,
it will be placed based on the 'Depth-first' principle.
When ACL rules are following the 'Depth-first' principle,
the number of an ACL rule must be given 0 ,but it will be assigned
automatically; otherwise, this rule will not be created."
::= { hwAclIpv6BasicRuleEntry 2 }
-- 1.3.6.1.4.1.2011.5.1.1.12.1.3
hwAclIpv6BasicAct OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the action of a ipv6 basic acl rule.
'deny' means discarding the packets that meet the condition,
'permit' means permitting the packets that meet the condition."
::= { hwAclIpv6BasicRuleEntry 3 }
-- 1.3.6.1.4.1.2011.5.1.1.12.1.4
hwAclIpv6BasicSrcIp OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the source IPv6-address of a ipv6 basic acl rule."
::= { hwAclIpv6BasicRuleEntry 4 }
-- 1.3.6.1.4.1.2011.5.1.1.12.1.5
hwAclIpv6BasicSrcPrefix OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the source IPv6-address prefix length of a ipv6 basic acl rule."
::= { hwAclIpv6BasicRuleEntry 5 }
-- 1.3.6.1.4.1.2011.5.1.1.12.1.6
hwAclIpv6BasicTimeRangeIndex OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the time range of a ipv6 basic acl rule.
When the current time is in time range, the rule is valid.
Zero value declares that the acl rule has no time range.
The invalid value is 0."
::= { hwAclIpv6BasicRuleEntry 6 }
-- 1.3.6.1.4.1.2011.5.1.1.12.1.7
hwAclIpv6BasicFragment OBJECT-TYPE
SYNTAX INTEGER
{
fragmentSubseq(0),
fragment(1),
none(255)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the type of the packet.
1: fragment, indicating that the packet is a fragment
255: none, invalid value
This object cannot be modified once a rule is created."
::= { hwAclIpv6BasicRuleEntry 7 }
-- 1.3.6.1.4.1.2011.5.1.1.12.1.8
hwAclIpv6BasicLog OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates whether to log the matched packets.
The log contents include sequence number of ACL rule, packets passed
or discarded, upper layer protocol type over IP, source/destination
address, source/destination port number, and number of packets."
::= { hwAclIpv6BasicRuleEntry 8 }
-- 1.3.6.1.4.1.2011.5.1.1.12.1.9
hwAclIpv6BasicEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates whether the rule is valid or invalid."
::= { hwAclIpv6BasicRuleEntry 9 }
-- 1.3.6.1.4.1.2011.5.1.1.12.1.10
hwAclIpv6BasicCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the statistics of matched packets by the rule."
::= { hwAclIpv6BasicRuleEntry 10 }
-- 1.3.6.1.4.1.2011.5.1.1.12.1.11
hwAclIpv6BasicVrfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the VRF name of this rule.
It specifies the VPN-instance to which the packet belongs."
::= { hwAclIpv6BasicRuleEntry 11 }
-- 1.3.6.1.4.1.2011.5.1.1.12.1.12
hwAclIpv6BasicRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus, Now support three value: CreateAndGo, Active and Destroy."
::= { hwAclIpv6BasicRuleEntry 12 }
-- 1.3.6.1.4.1.2011.5.1.1.12.1.13
hwAclIpv6BasicDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..127))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the description of this IPv6 basic rule.
The object describes the usage of an IPv6 ACL with a word or a sentence."
::= { hwAclIpv6BasicRuleEntry 13 }
-- 1.3.6.1.4.1.2011.5.1.1.13
hwAclIpv6AdvancedRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAclIpv6AdvancedRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure the rule for ipv6 advanced acl group."
::= { hwAclMibObjects 13 }
-- 1.3.6.1.4.1.2011.5.1.1.13.1
hwAclIpv6AdvancedRuleEntry OBJECT-TYPE
SYNTAX HwAclIpv6AdvancedRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains a rule of ipv6 advanced acl group."
INDEX { hwAclIpv6AdvancedAclNum, hwAclIpv6AdvancedSubitem }
::= { hwAclIpv6AdvancedRuleTable 1 }
HwAclIpv6AdvancedRuleEntry ::=
SEQUENCE {
hwAclIpv6AdvancedAclNum
Integer32,
hwAclIpv6AdvancedSubitem
Unsigned32,
hwAclIpv6AdvancedAct
INTEGER,
hwAclIpv6AdvancedProtocol
Integer32,
hwAclIpv6AdvancedSrcIp
Ipv6Address,
hwAclIpv6AdvancedSrcPrefix
Integer32,
hwAclIpv6AdvancedSrcOp
INTEGER,
hwAclIpv6AdvancedSrcPort1
Integer32,
hwAclIpv6AdvancedSrcPort2
Integer32,
hwAclIpv6AdvancedDestIp
Ipv6Address,
hwAclIpv6AdvancedDestPrefix
Integer32,
hwAclIpv6AdvancedDestOp
INTEGER,
hwAclIpv6AdvancedDestPort1
Integer32,
hwAclIpv6AdvancedDestPort2
Integer32,
hwAclIpv6AdvancedPrecedence
Integer32,
hwAclIpv6AdvancedTos
Integer32,
hwAclIpv6AdvancedDscp
Integer32,
hwAclIpv6AdvancedEstablish
TruthValue,
hwAclIpv6AdvancedTimeRangeIndex
Integer32,
hwAclIpv6AdvancedIcmpType
Integer32,
hwAclIpv6AdvancedIcmpCode
Integer32,
hwAclIpv6AdvancedFragment
INTEGER,
hwAclIpv6AdvancedLog
TruthValue,
hwAclIpv6AdvancedEnable
EnabledStatus,
hwAclIpv6AdvancedCount
Counter64,
hwAclIpv6AdvancedVrfName
OCTET STRING,
hwAclIpv6AdvancedRowStatus
RowStatus,
hwAclIpv6AdvancedDescription
OCTET STRING
}
-- 1.3.6.1.4.1.2011.5.1.1.13.1.1
hwAclIpv6AdvancedAclNum OBJECT-TYPE
SYNTAX Integer32 (3000..3999 | 42768..59151)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of ipv6 advanced acl table."
::= { hwAclIpv6AdvancedRuleEntry 1 }
-- 1.3.6.1.4.1.2011.5.1.1.13.1.2
hwAclIpv6AdvancedSubitem OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object specifies the number of an ipv6 advanced ACL rule.
If the number specified has been assigned to an ACL rule,
the new rule will overwrite the old one,
which is equal to editing the old rule.
If the number is not assigned, the system will define
a rule with the number and insert it to the place
corresponding to its number. If no number is specified,
the system will define a rule, assign a number to it and
add it into the ACL. It will be placed at the end of the
ACL when configuration sequence is adopted; otherwise,
it will be placed based on the 'Depth-first' principle.
When ACL rules are following the 'Depth-first' principle,
the number of an ACL rule must be given 0 ,but it will be assigned
automatically;otherwise,this rule will not be created."
::= { hwAclIpv6AdvancedRuleEntry 2 }
-- 1.3.6.1.4.1.2011.5.1.1.13.1.3
hwAclIpv6AdvancedAct OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the action of an ipv6 advanced acl rule.
'deny' means discarding the packets that meet the condition,
'permit' means permitting the packets that meet the condition."
::= { hwAclIpv6AdvancedRuleEntry 3 }
-- 1.3.6.1.4.1.2011.5.1.1.13.1.4
hwAclIpv6AdvancedProtocol OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the protocol type of the rule.
It specifies the protocol type over IP.The number of IPv6 protocol is 0."
::= { hwAclIpv6AdvancedRuleEntry 4 }
-- 1.3.6.1.4.1.2011.5.1.1.13.1.5
hwAclIpv6AdvancedSrcIp OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the source IPv6-address of an ipv6 advanced acl rule."
::= { hwAclIpv6AdvancedRuleEntry 5 }
-- 1.3.6.1.4.1.2011.5.1.1.13.1.6
hwAclIpv6AdvancedSrcPrefix OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the source IPv6-address prefix length of an ipv6 advanced acl rule."
::= { hwAclIpv6AdvancedRuleEntry 6 }
-- 1.3.6.1.4.1.2011.5.1.1.13.1.7
hwAclIpv6AdvancedSrcOp OBJECT-TYPE
SYNTAX INTEGER
{
lt(1),
eq(2),
gt(3),
neq(4),
range(5),
invalid(255)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the source Port operation symbol of an ipv6 advanced acl
rule. It compares the port operators of source address.
'lt' means less than,
'eq' means equal to,
'gt' means greater than,
'neq' means not equal to,
'range' means between,
'invalid' means this operation of the rule is invalid."
::= { hwAclIpv6AdvancedRuleEntry 7 }
-- 1.3.6.1.4.1.2011.5.1.1.13.1.8
hwAclIpv6AdvancedSrcPort1 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the fourth layer sourec port 1.
It specifies the source port information of UDP or TCP packets."
::= { hwAclIpv6AdvancedRuleEntry 8 }
-- 1.3.6.1.4.1.2011.5.1.1.13.1.9
hwAclIpv6AdvancedSrcPort2 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the fourth layer source port2."
::= { hwAclIpv6AdvancedRuleEntry 9 }
-- 1.3.6.1.4.1.2011.5.1.1.13.1.10
hwAclIpv6AdvancedDestIp OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the destination IPv6-address of an ipv6 advanced acl rule."
::= { hwAclIpv6AdvancedRuleEntry 10 }
-- 1.3.6.1.4.1.2011.5.1.1.13.1.11
hwAclIpv6AdvancedDestPrefix OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the destination IPv6-address prefix length of an ipv6 advanced acl rule."
::= { hwAclIpv6AdvancedRuleEntry 11 }
-- 1.3.6.1.4.1.2011.5.1.1.13.1.12
hwAclIpv6AdvancedDestOp OBJECT-TYPE
SYNTAX INTEGER
{
lt(1),
eq(2),
gt(3),
neq(4),
range(5),
invalid(255)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the destination Port operation symbol of an ipv6 advanced
acl group. It compares the port operators of destination address.
'lt' means less than,
'eq' means equal to,
'gt' means greater than,
'neq' means not equal to,
'range' means between,
'invalid' means this operation of the rule is invalid."
::= { hwAclIpv6AdvancedRuleEntry 12 }
-- 1.3.6.1.4.1.2011.5.1.1.13.1.13
hwAclIpv6AdvancedDestPort1 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the fourth layer destination port1."
::= { hwAclIpv6AdvancedRuleEntry 13 }
-- 1.3.6.1.4.1.2011.5.1.1.13.1.14
hwAclIpv6AdvancedDestPort2 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the fourth layer destination port2."
::= { hwAclIpv6AdvancedRuleEntry 14 }
-- 1.3.6.1.4.1.2011.5.1.1.13.1.15
hwAclIpv6AdvancedPrecedence OBJECT-TYPE
SYNTAX Integer32 (0..7|255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the value of IPv6-packet's precedence,
It filters packets according to precedence field. The invalid
value is 255."
::= { hwAclIpv6AdvancedRuleEntry 15 }
-- 1.3.6.1.4.1.2011.5.1.1.13.1.16
hwAclIpv6AdvancedTos OBJECT-TYPE
SYNTAX Integer32 (0..15|255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the value of IPv6-packet's TOS,
It filters packets according to type of service. The invalid
value is 255."
::= { hwAclIpv6AdvancedRuleEntry 16 }
-- 1.3.6.1.4.1.2011.5.1.1.13.1.17
hwAclIpv6AdvancedDscp OBJECT-TYPE
SYNTAX Integer32 (0..63|255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the value of frame.The invalid
value is 255."
::= { hwAclIpv6AdvancedRuleEntry 17 }
-- 1.3.6.1.4.1.2011.5.1.1.13.1.18
hwAclIpv6AdvancedEstablish OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates whether or not establishing."
DEFVAL { False }
::= { hwAclIpv6AdvancedRuleEntry 18 }
-- 1.3.6.1.4.1.2011.5.1.1.13.1.19
hwAclIpv6AdvancedTimeRangeIndex OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the time range of an ipv6 advanced acl rule.
When the current time is in the time range, the rule is valid.
Zero value declares that the acl rule has no time range.The
invalid value is 0."
::= { hwAclIpv6AdvancedRuleEntry 19 }
-- 1.3.6.1.4.1.2011.5.1.1.13.1.20
hwAclIpv6AdvancedIcmpType OBJECT-TYPE
SYNTAX Integer32 (0..255|65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the type of ICMPv6 packet.
It filters ICMP packets according to the ICMPv6 message type.
The invalid value is 65535."
::= { hwAclIpv6AdvancedRuleEntry 20 }
-- 1.3.6.1.4.1.2011.5.1.1.13.1.21
hwAclIpv6AdvancedIcmpCode OBJECT-TYPE
SYNTAX Integer32 (0..255|65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the code of ICMPv6 packet.
It filters ICMPv6 packets according to the message code.
The invalid value is 65535."
::= { hwAclIpv6AdvancedRuleEntry 21 }
-- 1.3.6.1.4.1.2011.5.1.1.13.1.22
hwAclIpv6AdvancedFragment OBJECT-TYPE
SYNTAX INTEGER
{
fragmentSubseq(0),
fragment(1),
none(255)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the type of the packet.
1: fragment, indicating that the packet is a fragment
255: none, invalid value
This object cannot be modified once a rule is created."
::= { hwAclIpv6AdvancedRuleEntry 22 }
-- 1.3.6.1.4.1.2011.5.1.1.13.1.23
hwAclIpv6AdvancedLog OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates whether to log the matched packets. The log
contents include sequence number of ACL rule,
packets passed or discarded, upper layer protocol type over IP,
source/destination address, source/destination port number,
and number of packets"
::= { hwAclIpv6AdvancedRuleEntry 23 }
-- 1.3.6.1.4.1.2011.5.1.1.13.1.24
hwAclIpv6AdvancedEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates whether the rule is valid or invalid."
::= { hwAclIpv6AdvancedRuleEntry 24 }
-- 1.3.6.1.4.1.2011.5.1.1.13.1.25
hwAclIpv6AdvancedCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the statistics of matched packets by the rule."
::= { hwAclIpv6AdvancedRuleEntry 25 }
-- 1.3.6.1.4.1.2011.5.1.1.13.1.26
hwAclIpv6AdvancedVrfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the VRF name of this rule,
It specifies the VPN-instance to which the packet belongs."
::= { hwAclIpv6AdvancedRuleEntry 26 }
-- 1.3.6.1.4.1.2011.5.1.1.13.1.27
hwAclIpv6AdvancedRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus, Now support three state:CreateAndGo,Active,Destroy."
::= { hwAclIpv6AdvancedRuleEntry 27 }
-- 1.3.6.1.4.1.2011.5.1.1.13.1.28
hwAclIpv6AdvancedDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..127))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the description of this IPv6 advanced rule.
The object describes the usage of an IPv6 ACL with a word or a sentence."
::= { hwAclIpv6AdvancedRuleEntry 28 }
-- 1.3.6.1.4.1.2011.5.1.1.14
hwAclEthernetFrameRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAclEthernetFrameRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure the rule for ethernet-frame-based acl group."
::= { hwAclMibObjects 14 }
-- 1.3.6.1.4.1.2011.5.1.1.14.1
hwAclEthernetFrameRuleEntry OBJECT-TYPE
SYNTAX HwAclEthernetFrameRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains a rule of ethernet-frame-based acl group."
INDEX { hwAclEthernetFrameAclNum, hwAclEthernetFrameSubitem }
::= { hwAclEthernetFrameRuleTable 1 }
HwAclEthernetFrameRuleEntry ::=
SEQUENCE {
hwAclEthernetFrameAclNum
Integer32,
hwAclEthernetFrameSubitem
Unsigned32,
hwAclEthernetFrameAct
INTEGER,
hwAclEthernetFrameType
Integer32,
hwAclEthernetFrameTypeMask
Integer32,
hwAclEthernetFrameSrcMac
MacAddress,
hwAclEthernetFrameSrcMacMask
MacAddress,
hwAclEthernetFrameDstMac
MacAddress,
hwAclEthernetFrameDstMacMask
MacAddress,
hwAclEthernetFrameTimeRangeIndex
Integer32,
hwAclEthernetFrameLog
TruthValue,
hwAclEthernetFrameEnable
EnabledStatus,
hwAclEthernetFrameCount
Counter64,
hwAclEthernetFrameRowStatus
RowStatus,
hwAclEthernetFrameEncapType
INTEGER,
hwAclEthernetFrameDoubleTag
TruthValue,
hwAclEthernetFrameVlanId
Integer32,
hwAclEthernetFrameVlanIdMask
Integer32,
hwAclEthernetFrameCVlanId
Integer32,
hwAclEthernetFrameCVlanIdMask
Integer32,
hwAclEthernetFrameRule8021p
Integer32,
hwAclEthernetFrameRuleCVlan8021p
Integer32,
hwAclEthernetFrameDescription
OCTET STRING
}
-- 1.3.6.1.4.1.2011.5.1.1.14.1.1
hwAclEthernetFrameAclNum OBJECT-TYPE
SYNTAX Integer32 (4000..4999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of ethernet-frame-based acl group."
::= { hwAclEthernetFrameRuleEntry 1 }
-- 1.3.6.1.4.1.2011.5.1.1.14.1.2
hwAclEthernetFrameSubitem OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object specifies the number of an ACL rule.
If the number specified has been assigned to an ACL rule,
the new rule will overwrite the old one,
which is equal to editing the old rule.
If the number is not assigned, the system will define
a rule with the number and insert it to the place
corresponding to its number. If no number is specified,
the system will define a rule, assign a number to it and
add it into the ACL. It will be placed at the end of the
ACL when configuration sequence is adopted; otherwise,
it will be placed based on the 'Depth-first' principle.
When ACL rules are following the 'Depth-first' principle,
the number of an ACL rule must be given 0 ,but it will be assigned
by step automatically;otherwise,this rule will not be created."
::= { hwAclEthernetFrameRuleEntry 2 }
-- 1.3.6.1.4.1.2011.5.1.1.14.1.3
hwAclEthernetFrameAct OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the action of an ethernet-frame-based acl rule.
'deny' means discarding the packets that meet the condition,
'permit' means permitting the packets that meet the condition."
::= { hwAclEthernetFrameRuleEntry 3 }
-- 1.3.6.1.4.1.2011.5.1.1.14.1.4
hwAclEthernetFrameType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the type of an ethernet frame.
It specifies the interface information of the packets. The invalid
ethernet frame type is 0."
::= { hwAclEthernetFrameRuleEntry 4 }
-- 1.3.6.1.4.1.2011.5.1.1.14.1.5
hwAclEthernetFrameTypeMask OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the mask of ethernet frame."
::= { hwAclEthernetFrameRuleEntry 5 }
-- 1.3.6.1.4.1.2011.5.1.1.14.1.6
hwAclEthernetFrameSrcMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the source mac address of rule."
::= { hwAclEthernetFrameRuleEntry 6 }
-- 1.3.6.1.4.1.2011.5.1.1.14.1.7
hwAclEthernetFrameSrcMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the source mac mask of rule."
::= { hwAclEthernetFrameRuleEntry 7 }
-- 1.3.6.1.4.1.2011.5.1.1.14.1.8
hwAclEthernetFrameDstMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the destination mac address of rule."
::= { hwAclEthernetFrameRuleEntry 8 }
-- 1.3.6.1.4.1.2011.5.1.1.14.1.9
hwAclEthernetFrameDstMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the destination mac mask of rule."
::= { hwAclEthernetFrameRuleEntry 9 }
-- 1.3.6.1.4.1.2011.5.1.1.14.1.10
hwAclEthernetFrameTimeRangeIndex OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the time range of a ethernet frame
acl rule. When the current time is in time range, the rule
is valid. Zero value declares that the acl rule has no
time range. The invalid value is 0."
::= { hwAclEthernetFrameRuleEntry 10 }
-- 1.3.6.1.4.1.2011.5.1.1.14.1.11
hwAclEthernetFrameLog OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates whether to log the matched packets.
The log contents include sequence number of ACL rule,
packets passed or discarded, source/destination mac addr,
protocol of ethernet frame, and number of packets."
::= { hwAclEthernetFrameRuleEntry 11 }
-- 1.3.6.1.4.1.2011.5.1.1.14.1.12
hwAclEthernetFrameEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates whether the rule is valid or invalid."
::= { hwAclEthernetFrameRuleEntry 12 }
-- 1.3.6.1.4.1.2011.5.1.1.14.1.13
hwAclEthernetFrameCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the statistics of matched packets by rule."
::= { hwAclEthernetFrameRuleEntry 13 }
-- 1.3.6.1.4.1.2011.5.1.1.14.1.14
hwAclEthernetFrameRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus,Now support three state:CreateAndGo,Active,Destroy."
::= { hwAclEthernetFrameRuleEntry 14 }
hwAclEthernetFrameEncapType OBJECT-TYPE
SYNTAX INTEGER
{
ether2(1),
ieee802dot3(2),
snap(3),
none(255)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the encapsulation type of rule."
DEFVAL { none }
::= { hwAclEthernetFrameRuleEntry 15 }
hwAclEthernetFrameDoubleTag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates two tags of rule. False value do not
care the number of tags."
DEFVAL { False }
::= { hwAclEthernetFrameRuleEntry 16 }
hwAclEthernetFrameVlanId OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the vlan ID of rule. The invalid
vlan ID is 0."
DEFVAL { 0 }
::= { hwAclEthernetFrameRuleEntry 17 }
hwAclEthernetFrameVlanIdMask OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the vlan ID mask of rule."
DEFVAL { 4095 }
::= { hwAclEthernetFrameRuleEntry 18 }
hwAclEthernetFrameCVlanId OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the ce-vlan ID of rule. The invalid
vlan ID is 0."
DEFVAL { 0 }
::= { hwAclEthernetFrameRuleEntry 19 }
hwAclEthernetFrameCVlanIdMask OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the ce-vlan ID mask of rule."
DEFVAL { 4095 }
::= { hwAclEthernetFrameRuleEntry 20 }
hwAclEthernetFrameRule8021p OBJECT-TYPE
SYNTAX Integer32 (0..7 | 255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the 8021p value of S-tag."
::= { hwAclEthernetFrameRuleEntry 21 }
hwAclEthernetFrameRuleCVlan8021p OBJECT-TYPE
SYNTAX Integer32 (0..7 | 255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the 8021p value of C-tag."
::= { hwAclEthernetFrameRuleEntry 22 }
hwAclEthernetFrameDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..127))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the description of this ethernetframe rule.
The object describes the usage of an ACL with a word or a sentence."
::= { hwAclEthernetFrameRuleEntry 23 }
hwAclAppliedTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAclAppliedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure the applied ACL."
::= { hwAclMibObjects 15 }
hwAclAppliedEntry OBJECT-TYPE
SYNTAX HwAclAppliedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains a applied ACL."
INDEX { hwAclAppliedOperation, hwAclAppliedScopeType, hwAclAppliedScopeIndex, hwAclAppliedDirection, hwAclAppliedAclNum,
hwAclAppliedSubitem, hwAclAppliedAclNum2, hwAclAppliedSubitem2, hwAclAppliedIsIPv6Acl }
::= { hwAclAppliedTable 1 }
HwAclAppliedEntry ::=
SEQUENCE {
hwAclAppliedOperation
INTEGER,
hwAclAppliedScopeType
INTEGER,
hwAclAppliedScopeIndex
Integer32,
hwAclAppliedDirection
INTEGER,
hwAclAppliedAclNum
Integer32,
hwAclAppliedSubitem
Integer32,
hwAclAppliedAclNum2
Integer32,
hwAclAppliedSubitem2
Integer32,
hwAclAppliedStatMode
INTEGER,
hwAclAppliedStatCount
Counter64,
hwAclAppliedLimitCir
Integer32,
hwAclAppliedLimitPir
Integer32,
hwAclAppliedLimitCbs
Integer32,
hwAclAppliedLimitPbs
Integer32,
hwAclAppliedLimitGreenAction
INTEGER,
hwAclAppliedLimitGreenValue
Integer32,
hwAclAppliedLimitYellowAction
INTEGER,
hwAclAppliedLimitYellowValue
Integer32,
hwAclAppliedLimitRedAction
INTEGER,
hwAclAppliedLimitRedValue
Integer32,
hwAclAppliedMirrObservedPort
Integer32,
hwAclAppliedMirrRspanVlan
Integer32,
hwAclAppliedRedirectIfIndex
Integer32,
hwAclAppliedRedirectIpAddr
IpAddress,
hwAclAppliedRedirectIpv6Addr
Ipv6Address,
hwAclAppliedRemarkVlan
Integer32,
hwAclAppliedRemarkCVlan
Integer32,
hwAclAppliedRemark8021p
Integer32,
hwAclAppliedRemarkDscp
Integer32,
hwAclAppliedRemarkIpPre
Integer32,
hwAclAppliedRemarkLocalPre
Integer32,
hwAclAppliedRemarkMacAddr
MacAddress,
hwAclAppliedIsIPv6Acl
TruthValue,
hwAclAppliedRowStatus
RowStatus
}
hwAclAppliedOperation OBJECT-TYPE
SYNTAX INTEGER
{
filter(1),
limit(2),
mirror(3),
redirectCpu(4),
redirectInterface(5),
redirectIpNextHop(6),
redirectIpv6NextHop(7),
remark8021p(8),
remarkDscp(9),
remarkIpPrecedence(10),
remarkLocalPrecedence(11),
remarkVlanId(12),
remarkCVlanId(13),
remarkDestMac(14),
statistic(15)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The actions taken when packets conforming or exceeding the configured."
::= { hwAclAppliedEntry 1 }
hwAclAppliedScopeType OBJECT-TYPE
SYNTAX INTEGER
{
global(1),
vlan(2),
interface(3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The scope that ACL apply on."
::= { hwAclAppliedEntry 2 }
hwAclAppliedScopeIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"When the scope is global, this field is invalid;
When the scope is vlan, this field is vlan ID;
When the scope is interface, this field is interface index."
::= { hwAclAppliedEntry 3 }
hwAclAppliedDirection OBJECT-TYPE
SYNTAX INTEGER
{
inbound(1),
outbound(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The direction acl apply on."
::= { hwAclAppliedEntry 4 }
hwAclAppliedAclNum OBJECT-TYPE
SYNTAX Integer32 (2000..4999)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of ACL group.
Basic ACL in range 2000~2999;
Advance ACL in range 3000~3999;
Link ACL in range 4000~4999;"
::= { hwAclAppliedEntry 5 }
hwAclAppliedSubitem OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object specifies the number of an ACL rule."
::= { hwAclAppliedEntry 6 }
hwAclAppliedAclNum2 OBJECT-TYPE
SYNTAX Integer32 (2000..3999|65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of ACL group.
65535 means this field is valid."
::= { hwAclAppliedEntry 7 }
hwAclAppliedSubitem2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object specifies the number of an ACL rule."
::= { hwAclAppliedEntry 8 }
hwAclAppliedStatMode OBJECT-TYPE
SYNTAX INTEGER
{
byPackets(1),
byBytes(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object specifies the mode of statistics.
When action is statistic, this field is valid."
DEFVAL { byPackets }
::= { hwAclAppliedEntry 9 }
hwAclAppliedStatCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the statistics of matched packets by the policy.
When action is statistic or limit, this field is valid."
::= { hwAclAppliedEntry 10 }
hwAclAppliedLimitCir OBJECT-TYPE
SYNTAX Integer32 (0 | 64..10000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Committed information rate. Unit: kbps."
DEFVAL { 0 }
::= { hwAclAppliedEntry 11 }
hwAclAppliedLimitPir OBJECT-TYPE
SYNTAX Integer32 (0 | 64..10000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Peak information rate. Unit: kbps.
0 is the default value."
DEFVAL { 0 }
::= { hwAclAppliedEntry 12 }
hwAclAppliedLimitCbs OBJECT-TYPE
SYNTAX Integer32 (0 | 4096..16773120)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Committed burst size. Unit: byte.
0 is the default value."
DEFVAL { 0 }
::= { hwAclAppliedEntry 13 }
hwAclAppliedLimitPbs OBJECT-TYPE
SYNTAX Integer32 (0 | 4096..16773120)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Peak burst size. Unit: byte.
0 is the default value."
DEFVAL { 0 }
::= { hwAclAppliedEntry 14 }
hwAclAppliedLimitGreenAction OBJECT-TYPE
SYNTAX INTEGER
{
pass(1),
drop(2),
passRemarkDscp(3),
passRemark8021p(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Green action."
DEFVAL { pass }
::= { hwAclAppliedEntry 15 }
hwAclAppliedLimitGreenValue OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value is to remark When green action is remarking.
For remarking DSCP, the range is 0~63;
For remarking 8021p, the range is 0~7."
::= { hwAclAppliedEntry 16 }
hwAclAppliedLimitYellowAction OBJECT-TYPE
SYNTAX INTEGER
{
pass(1),
drop(2),
passRemarkDscp(3),
passRemark8021p(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Yellow action."
DEFVAL { pass }
::= { hwAclAppliedEntry 17 }
hwAclAppliedLimitYellowValue OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value is to remark When yellow action is remarking.
For remarking DSCP, the range is 0~63;
For remarking 8021p, the range is 0~7."
::= { hwAclAppliedEntry 18 }
hwAclAppliedLimitRedAction OBJECT-TYPE
SYNTAX INTEGER
{
pass(1),
drop(2),
passRemarkDscp(3),
passRemark8021p(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Red action."
DEFVAL { drop }
::= { hwAclAppliedEntry 19 }
hwAclAppliedLimitRedValue OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value is to remark When red action is remarking.
For remarking DSCP, the range is 0~63;
For remarking 8021p, the range is 0~7."
::= { hwAclAppliedEntry 20 }
hwAclAppliedMirrObservedPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mirror observe port number."
::= { hwAclAppliedEntry 21 }
hwAclAppliedMirrRspanVlan OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object specifies the RSPAN vlan.
0 means mirror to local port."
::= { hwAclAppliedEntry 22 }
hwAclAppliedRedirectIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The redirect output interface."
::= { hwAclAppliedEntry 23 }
hwAclAppliedRedirectIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The redirect IP next hop address."
::= { hwAclAppliedEntry 24 }
hwAclAppliedRedirectIpv6Addr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The redirect IPv6 next hop address."
::= { hwAclAppliedEntry 25 }
hwAclAppliedRemarkVlan OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The remarked vlan ID."
::= { hwAclAppliedEntry 26 }
hwAclAppliedRemarkCVlan OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The remarked ce-vlan ID."
::= { hwAclAppliedEntry 27 }
hwAclAppliedRemark8021p OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The remarked 8021p value."
::= { hwAclAppliedEntry 28 }
hwAclAppliedRemarkDscp OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The remarked DSCP value."
::= { hwAclAppliedEntry 29 }
hwAclAppliedRemarkIpPre OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The remarked IP precedence value."
::= { hwAclAppliedEntry 30 }
hwAclAppliedRemarkLocalPre OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The remarked local precedence value."
::= { hwAclAppliedEntry 31 }
hwAclAppliedRemarkMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The remarked MAC address."
::= { hwAclAppliedEntry 32 }
hwAclAppliedIsIPv6Acl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object indicates whether is IPv6 ACL."
::= { hwAclAppliedEntry 33 }
hwAclAppliedRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus,Now support three state:CreateAndGo,Active,Destroy."
::= { hwAclAppliedEntry 51 }
hwAclIpv6NumGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAclIpv6NumGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IPv6 ACL group information."
::= { hwAclMibObjects 16 }
hwAclIpv6NumGroupEntry OBJECT-TYPE
SYNTAX HwAclIpv6NumGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing characters of an IPv6 ACL group."
INDEX { hwAclIpv6NumGroupAclNum }
::= { hwAclIpv6NumGroupTable 1 }
HwAclIpv6NumGroupEntry ::=
SEQUENCE {
hwAclIpv6NumGroupAclNum
Integer32,
hwAclIpv6NumGroupMatchOrder
INTEGER,
hwAclIpv6NumGroupSubitemNum
Counter32,
hwAclIpv6NumGroupCountClear
INTEGER,
hwAclIpv6NumGroupAclName
OCTET STRING,
hwAclIpv6NumGroupDescription
OCTET STRING,
hwAclIpv6NumGroupAclType
INTEGER,
hwAclIpv6NumGroupRowStatus
RowStatus
}
hwAclIpv6NumGroupAclNum OBJECT-TYPE
SYNTAX Integer32 (1000..3999|42768..59151)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of IPv6 ACL group, identifying an IPv6 ACL."
::= { hwAclIpv6NumGroupEntry 1 }
hwAclIpv6NumGroupMatchOrder OBJECT-TYPE
SYNTAX INTEGER
{
config(1),
auto(2),
default(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the match order of rules.
'config' means matching ACL rules in the configuration sequence,
'auto' means the ACL6 rules are matched following the 'Depth-first' principle."
DEFVAL { default }
::= { hwAclIpv6NumGroupEntry 2 }
hwAclIpv6NumGroupSubitemNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the rules in the ACL6 group."
::= { hwAclIpv6NumGroupEntry 3 }
hwAclIpv6NumGroupCountClear OBJECT-TYPE
SYNTAX INTEGER
{
cleared(1),
notUsed(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Reset the statistics of ACL6 group."
::= { hwAclIpv6NumGroupEntry 4 }
hwAclIpv6NumGroupAclName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the name of an acl6 group,
The first character must be start with a to z or A to Z,
and the length cannot exceed 32 character."
::= { hwAclIpv6NumGroupEntry 5 }
hwAclIpv6NumGroupDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..127))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the description of this acl6 group.
The object describes the usage of an ACL6 with a word or a sentence."
::= { hwAclIpv6NumGroupEntry 6 }
-- 1.3.6.1.4.1.2011.5.1.1.16.1.7
hwAclIpv6NumGroupAclType OBJECT-TYPE
SYNTAX INTEGER
{
basic(1),
advanced(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of IPv6 ACL group."
::= { hwAclIpv6NumGroupEntry 7 }
hwAclIpv6NumGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus, Now support three value:CreateAndGo,Active,Destroy."
::= { hwAclIpv6NumGroupEntry 51 }
hwAclIpv6IfRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAclIpv6IfRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure the rule for interface-based acl6 group."
::= { hwAclMibObjects 17 }
hwAclIpv6IfRuleEntry OBJECT-TYPE
SYNTAX HwAclIpv6IfRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains a rule of interface-based acl6 group."
INDEX { hwAclIpv6IfAclNum, hwAclIpv6IfSubitem }
::= { hwAclIpv6IfRuleTable 1 }
HwAclIpv6IfRuleEntry ::=
SEQUENCE {
hwAclIpv6IfAclNum
Integer32,
hwAclIpv6IfSubitem
Unsigned32,
hwAclIpv6IfAct
INTEGER,
hwAclIpv6IfIndex
Integer32,
hwAclIpv6IfAny
TruthValue,
hwAclIpv6IfTimeRangeIndex
Integer32,
hwAclIpv6IfLog
TruthValue,
hwAclIpv6IfEnable
TruthValue,
hwAclIpv6IfCount
Counter64,
hwAclIpv6IfRowStatus
RowStatus
}
hwAclIpv6IfAclNum OBJECT-TYPE
SYNTAX Integer32 (1000..1999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of interface-based acl6 group."
::= { hwAclIpv6IfRuleEntry 1 }
hwAclIpv6IfSubitem OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object specifies the number of an ACL6 rule.
If the number specified has been assigned to an ACL6 rule,
the new rule will overwrite the old one,
which is equal to editing the old rule.
If the number is not assigned, the system will define
a rule with the number and insert it to the place
corresponding to its number. If no number is specified,
the system will define a rule, assign a number to it and
add it into the ACL6. It will be placed at the end of the
ACL6 when configuration sequence is adopted; otherwise,
it will be placed based on the 'Depth-first' principle.
When ACL rules are following the 'Depth-first' principle,
the number of an ACL6 rule must be given 0, but it will be assigned
automatically;otherwise, this rule will not be created."
::= { hwAclIpv6IfRuleEntry 2 }
hwAclIpv6IfAct OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the action of an interface-based acl6 rule.
'deny' means discarding the packets that meet the condition,
'permit' means permitting the packets that meet the condition."
::= { hwAclIpv6IfRuleEntry 3 }
hwAclIpv6IfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the index of an interface.
It specifies the interface information of the packets. The invalid
interface index is 0."
::= { hwAclIpv6IfRuleEntry 4 }
hwAclIpv6IfAny OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates whether or not matching any interface."
::= { hwAclIpv6IfRuleEntry 5 }
hwAclIpv6IfTimeRangeIndex OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the time range of an interface-based acl6 rule.
when the current time is in time range, the rule is valid.
Zero value declares that the acl rule has no time range.
The invalid value is 0."
::= { hwAclIpv6IfRuleEntry 6 }
hwAclIpv6IfLog OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates whether to log the matched packets.
The log contents include sequence number of ACL6 rule,
packets passed or discarded, upper layer protocol type over IP,
source/destination address, source/destination port number,
and number of packets."
::= { hwAclIpv6IfRuleEntry 7 }
hwAclIpv6IfEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates whether the rule is valid or invalid."
::= { hwAclIpv6IfRuleEntry 8 }
hwAclIpv6IfCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the statistics of matched packets by basic rule."
::= { hwAclIpv6IfRuleEntry 9 }
hwAclIpv6IfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus,Now support three state:CreateAndGo,Active,Destroy."
::= { hwAclIpv6IfRuleEntry 11 }
-- chenjing 43944
-- 1.3.6.1.4.1.2011.5.1.1.18
hwAclMplsRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAclMplsRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure the rule for mpls acl group."
::= { hwAclMibObjects 18 }
-- 1.3.6.1.4.1.2011.5.1.1.18.1
hwAclMplsRuleEntry OBJECT-TYPE
SYNTAX HwAclMplsRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry is a rule of mpls acl."
INDEX { hwAclMplsAclNum, hwAclMplsSubitem }
::= { hwAclMplsRuleTable 1 }
HwAclMplsRuleEntry ::=
SEQUENCE {
hwAclMplsAclNum
Integer32,
hwAclMplsSubitem
Unsigned32,
hwAclMplsAct
INTEGER,
hwAclMplsExp1
Integer32,
hwAclMplsExp2
Integer32,
hwAclMplsExp3
Integer32,
hwAclMplsExp4
Integer32,
hwAclMplsLabel1
Integer32,
hwAclMplsLabel2
Integer32,
hwAclMplsLabel3
Integer32,
hwAclMplsLabel4
Integer32,
hwAclMplsTTLOP1
INTEGER,
hwAclMplsTTL1Begin
Integer32,
hwAclMplsTTL1End
Integer32,
hwAclMplsTTLOP2
INTEGER,
hwAclMplsTTL2Begin
Integer32,
hwAclMplsTTL2End
Integer32,
hwAclMplsTTLOP3
INTEGER,
hwAclMplsTTL3Begin
Integer32,
hwAclMplsTTL3End
Integer32,
hwAclMplsRowStatus
RowStatus,
hwAclMplsCount
Counter64
}
-- 1.3.6.1.4.1.2011.5.1.1.18.1.1
hwAclMplsAclNum OBJECT-TYPE
SYNTAX Integer32 (10000..10999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of mpls acl group"
::= { hwAclMplsRuleEntry 1 }
-- 1.3.6.1.4.1.2011.5.1.1.18.1.2
hwAclMplsSubitem OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The objects specifies the number of an ACL rule.
If the number specified has been assigned to an ACL rule,
the new rule will overwrite the old one,
which is equal to editing the old rule.
If the number is not assigned, the system will define
a rule with the number and insert it to the place
corresponding to its number. If no number is specified,
the system will define a rule, assign a number to it and
add it into the ACL. It will be placed at the end of the
ACL when configuration sequence is adopted; otherwise,
it will be placed based on the 'Depth-first' principle.
When ACL rules are following the 'Depth-first' principle,
the number of an ACL rule must be given 0 ,but it will be assigned
by step automatically;otherwise,this rule will not be created."
::= { hwAclMplsRuleEntry 2 }
-- 1.3.6.1.4.1.2011.5.1.1.18.1.3
hwAclMplsAct OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the action of a basic acl rule.
'deny' means discarding the packets that meet the condition,
'permit' means permitting the packets that meet the condition."
::= { hwAclMplsRuleEntry 3 }
-- 1.3.6.1.4.1.2011.5.1.1.18.1.4
hwAclMplsExp1 OBJECT-TYPE
SYNTAX Integer32 (0..7|255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the exp1 of a mpls acl rule."
::= { hwAclMplsRuleEntry 4 }
-- 1.3.6.1.4.1.2011.5.1.1.18.1.5
hwAclMplsExp2 OBJECT-TYPE
SYNTAX Integer32 (0..7|255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the exp2 of a mpls acl rule."
::= { hwAclMplsRuleEntry 5 }
-- 1.3.6.1.4.1.2011.5.1.1.18.1.6
hwAclMplsExp3 OBJECT-TYPE
SYNTAX Integer32 (0..7|255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the exp3 of a mpls acl rule."
::= { hwAclMplsRuleEntry 6 }
-- 1.3.6.1.4.1.2011.5.1.1.18.1.7
hwAclMplsExp4 OBJECT-TYPE
SYNTAX Integer32 (0..7|255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the exp4 of a mpls acl rule."
::= { hwAclMplsRuleEntry 7 }
-- 1.3.6.1.4.1.2011.5.1.1.18.1.8
hwAclMplsLabel1 OBJECT-TYPE
SYNTAX Integer32 (-1|0..1048575)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the label1 of a mpls acl rule."
::= { hwAclMplsRuleEntry 8 }
-- 1.3.6.1.4.1.2011.5.1.1.18.1.9
hwAclMplsLabel2 OBJECT-TYPE
SYNTAX Integer32 (-1|0..1048575)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the label2 of a mpls acl rule."
::= { hwAclMplsRuleEntry 9 }
-- 1.3.6.1.4.1.2011.5.1.1.18.1.10
hwAclMplsLabel3 OBJECT-TYPE
SYNTAX Integer32 (-1|0..1048575)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the label3 of a mpls acl rule."
::= { hwAclMplsRuleEntry 10 }
-- 1.3.6.1.4.1.2011.5.1.1.18.1.11
hwAclMplsLabel4 OBJECT-TYPE
SYNTAX Integer32 (-1|0..1048575)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the label4 of a mpls acl rule."
::= { hwAclMplsRuleEntry 11 }
-- 1.3.6.1.4.1.2011.5.1.1.18.1.12
hwAclMplsTTLOP1 OBJECT-TYPE
SYNTAX INTEGER
{
lt(1),
eq(2),
gt(3),
range(5),
invalid(0),
any(255)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the ttl operation symbol of a mpls
acl rule. It compares the operators of ttl value.
'lt' means less than,
'eq' means equal to,
'gt' means greater than,
'range' means between,
'invalid' means this operation of the ttl is invalid."
::= { hwAclMplsRuleEntry 12 }
-- 1.3.6.1.4.1.2011.5.1.1.18.1.13
hwAclMplsTTL1Begin OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the begin value of a mpls ttl."
::= { hwAclMplsRuleEntry 13 }
-- 1.3.6.1.4.1.2011.5.1.1.18.1.14
hwAclMplsTTL1End OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the end value of a mpls ttl."
::= { hwAclMplsRuleEntry 14 }
-- 1.3.6.1.4.1.2011.5.1.1.18.1.15
hwAclMplsTTLOP2 OBJECT-TYPE
SYNTAX INTEGER
{
lt(1),
eq(2),
gt(3),
range(5),
invalid(0),
any(255)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the ttl operation symbol of a mpls
acl rule. It compares the operators of ttl value.
'lt' means less than,
'eq' means equal to,
'gt' means greater than,
'range' means between,
'invalid' means this operation of the ttl is invalid."
::= { hwAclMplsRuleEntry 15 }
-- 1.3.6.1.4.1.2011.5.1.1.18.1.16
hwAclMplsTTL2Begin OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the begin value of a mpls ttl."
::= { hwAclMplsRuleEntry 16 }
-- 1.3.6.1.4.1.2011.5.1.1.18.1.17
hwAclMplsTTL2End OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the end value of a mpls ttl."
::= { hwAclMplsRuleEntry 17 }
-- 1.3.6.1.4.1.2011.5.1.1.18.1.18
hwAclMplsTTLOP3 OBJECT-TYPE
SYNTAX INTEGER
{
lt(1),
eq(2),
gt(3),
range(5),
invalid(0),
any(255)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the ttl operation symbol of a mpls
acl rule. It compares the operators of ttl value.
'lt' means less than,
'eq' means equal to,
'gt' means greater than,
'range' means between,
'invalid' means this operation of the ttl is invalid."
::= { hwAclMplsRuleEntry 18 }
-- 1.3.6.1.4.1.2011.5.1.1.18.1.19
hwAclMplsTTL3Begin OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the begin value of a mpls ttl."
::= { hwAclMplsRuleEntry 19 }
-- 1.3.6.1.4.1.2011.5.1.1.18.1.20
hwAclMplsTTL3End OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the end value of a mpls ttl."
::= { hwAclMplsRuleEntry 20 }
-- 1.3.6.1.4.1.2011.5.1.1.18.1.21
hwAclMplsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus, Now support three value:CreateAndGo,Active and Destroy."
::= { hwAclMplsRuleEntry 21 }
-- 1.3.6.1.4.1.2011.5.1.1.18.1.22
hwAclMplsCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the statistics of matched packets by the rule."
::= { hwAclMplsRuleEntry 22 }
-- chenjing 43944
-- Acl Trap MIB definition
--
-- 1.3.6.1.4.1.2011.5.1.2
hwAclMibTrap OBJECT IDENTIFIER ::= { hwAcl 2 }
-- 1.3.6.1.4.1.2011.5.1.2.1
hwAclTrapOid OBJECT IDENTIFIER ::= { hwAclMibTrap 1 }
-- 1.3.6.1.4.1.2011.5.1.2.2
hwAclTrapsDefine OBJECT IDENTIFIER ::= { hwAclMibTrap 2 }
-- 1.3.6.1.4.1.2011.5.1.2.2.1
hwAclTraps OBJECT IDENTIFIER ::= { hwAclTrapsDefine 1 }
-- Acl MIB Conformance definition
--
-- 1.3.6.1.4.1.2011.5.1.3
hwAclMibConformance OBJECT IDENTIFIER ::= { hwAcl 3 }
-- 1.3.6.1.4.1.2011.5.1.3.1
hwAclMibCompliances OBJECT IDENTIFIER ::= { hwAclMibConformance 1 }
-- this module
-- 1.3.6.1.4.1.2011.5.1.3.1.1
hwAclMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which
implement the Huawei acl MIB."
MODULE -- this module
MANDATORY-GROUPS { hwAclGroup }
OBJECT hwAclBasicRowStatus
SYNTAX INTEGER
{
active(1),
createAndGo(4),
destory(6)
}
DESCRIPTION
"The value of creatAndWaite, notInservice and notReady are not required."
OBJECT hwAclAdvancedRowStatus
SYNTAX INTEGER
{
active(1),
createAndGo(4),
destory(6)
}
DESCRIPTION
"The value of creatAndWaite, notInservice and notReady are not required."
OBJECT hwAclIfRowStatus
SYNTAX INTEGER
{
active(1),
createAndGo(4),
destroy(6)
}
DESCRIPTION
"The value of creatAndWaite, notInservice and notReady are not required."
OBJECT hwAclIpv6BasicRowStatus
SYNTAX INTEGER
{
active(1),
createAndGo(4),
destroy(6)
}
DESCRIPTION
"The value of creatAndWaite, notInservice and notReady are not required."
OBJECT hwAclIpv6AdvancedRowStatus
SYNTAX INTEGER
{
active(1),
createAndGo(4),
destroy(6)
}
DESCRIPTION
"The value of creatAndWaite, notInservice and notReady are not required."
OBJECT hwAclEthernetFrameRowStatus
SYNTAX INTEGER
{
active(1),
createAndGo(4),
destroy(6)
}
DESCRIPTION
"The value of creatAndWaite, notInservice and notReady are not required."
OBJECT hwAclAppliedRowStatus
SYNTAX INTEGER
{
active(1),
createAndGo(4),
destroy(6)
}
DESCRIPTION
"The value of creatAndWaite, notInservice and notReady are not required."
OBJECT hwAclIpv6NumGroupRowStatus
SYNTAX INTEGER
{
active(1),
createAndGo(4),
destroy(6)
}
DESCRIPTION
"The value of creatAndWaite, notInservice and notReady are not required."
OBJECT hwAclIpv6IfRowStatus
SYNTAX INTEGER
{
active(1),
createAndGo(4),
destroy(6)
}
DESCRIPTION
"The value of creatAndWaite, notInservice and notReady are not required."
OBJECT hwAclMplsRowStatus
SYNTAX INTEGER
{
active(1),
createAndGo(4),
destroy(6)
}
DESCRIPTION
"The value of creatAndWaite, notInservice and notReady are not required."
::= { hwAclMibCompliances 1 }
-- 1.3.6.1.4.1.2011.5.1.3.2
hwAclMibGroups OBJECT IDENTIFIER ::= { hwAclMibConformance 2 }
-- 1.3.6.1.4.1.2011.5.1.3.2.1
hwAclGroup OBJECT-GROUP
OBJECTS { hwAclNumGroupMatchOrder, hwAclNumGroupSubitemNum, hwAclNumGroupAclName, hwAclBasicAct, hwAclBasicSrcIp,
hwAclBasicSrcWild, hwAclBasicTimeRangeIndex, hwAclBasicFragments, hwAclBasicLog, hwAclBasicEnable,
hwAclBasicCount, hwAclBasicRowStatus, hwAclAdvancedAct, hwAclAdvancedProtocol, hwAclAdvancedSrcIp,
hwAclAdvancedSrcWild, hwAclAdvancedSrcOp, hwAclAdvancedSrcPort1, hwAclAdvancedSrcPort2, hwAclAdvancedDestIp,
hwAclAdvancedDestWild, hwAclAdvancedDestOp, hwAclAdvancedDestPort1, hwAclAdvancedDestPort2, hwAclAdvancedPrecedence,
hwAclAdvancedTos, hwAclAdvancedDscp, hwAclAdvancedEstablish, hwAclAdvancedTimeRangeIndex, hwAclAdvancedIcmpType,
hwAclAdvancedIcmpCode, hwAclAdvancedFragments, hwAclAdvancedLog, hwAclAdvancedEnable, hwAclAdvancedCount,
hwAclAdvancedRowStatus, hwAclAdvancedTcpSyncFlag, hwAclIfAct, hwAclIfIndex, hwAclIfAny,
hwAclIfTimeRangeIndex, hwAclIfLog, hwAclIfEnable, hwAclIfCount, hwAclIfRowStatus,
hwAclUserAct, hwAclUserProtocol, hwAclUserSrcIp, hwAclUserSrcWild, hwAclUserSrcOp,
hwAclUserSrcPort1, hwAclUserSrcPort2, hwAclUserDestIp, hwAclUserDestWild, hwAclUserDestOp,
hwAclUserDestPort1, hwAclUserDestPort2, hwAclUserPrecedence, hwAclUserTos, hwAclUserDscp,
hwAclUserEstablish, hwAclUserTimeRangeIndex, hwAclUserIcmpType, hwAclUserIcmpCode, hwAclUserFragments,
hwAclUserLog, hwAclUserEnable, hwAclUserCount, hwAclUserSrcUserGroupName, hwAclUserDestUserGroupName,
hwAclUserSrcModeType, hwAclUserDestModeType, hwAclUserRowStatus, hwAclCompileEnableFlag, hwAclNumGroupAclNum,
hwAclBasicAclNum, hwAclBasicSubitem, hwAclAdvancedAclNum, hwAclAdvancedSubitem, hwAclIfAclNum,
hwAclIfSubitem, hwAclUserAclNum, hwAclUserSubitem, hwAclUserVrfName, hwAclUserTcpSyncFlag,
hwAclEthernetFrameEncapType, hwAclEthernetFrameDoubleTag, hwAclEthernetFrameVlanId, hwAclEthernetFrameVlanIdMask, hwAclEthernetFrameCVlanId,
hwAclEthernetFrameCVlanIdMask, hwAclAppliedStatMode, hwAclAppliedStatCount, hwAclAppliedLimitCir, hwAclAppliedLimitPir,
hwAclAppliedLimitCbs, hwAclAppliedLimitPbs, hwAclAppliedLimitGreenAction, hwAclAppliedLimitGreenValue, hwAclAppliedLimitYellowAction,
hwAclAppliedLimitYellowValue, hwAclAppliedLimitRedAction, hwAclAppliedLimitRedValue, hwAclAppliedMirrObservedPort, hwAclAppliedMirrRspanVlan,
hwAclAppliedRedirectIfIndex, hwAclAppliedRedirectIpAddr, hwAclAppliedRedirectIpv6Addr, hwAclAppliedRemarkVlan, hwAclAppliedRemarkCVlan,
hwAclAppliedRemark8021p, hwAclAppliedRemarkDscp, hwAclAppliedRemarkIpPre, hwAclAppliedRemarkLocalPre, hwAclAppliedRemarkMacAddr,
hwAclAppliedRowStatus, hwAclCompileNumGroupStatus, hwAclNumGroupStep, hwAclNumGroupDescription, hwAclNumGroupCountClear,
hwAclNumGroupRowStatus, hwAclBasicVrfName, hwAclAdvancedVrfName, hwAclIpv6BasicAct, hwAclIpv6BasicSrcIp,
hwAclIpv6BasicSrcPrefix, hwAclIpv6BasicTimeRangeIndex, hwAclIpv6BasicFragment, hwAclIpv6BasicLog, hwAclIpv6BasicEnable,
hwAclIpv6BasicCount, hwAclIpv6BasicVrfName, hwAclIpv6BasicRowStatus, hwAclIpv6AdvancedAct, hwAclIpv6AdvancedProtocol,
hwAclIpv6AdvancedSrcIp, hwAclIpv6AdvancedSrcPrefix, hwAclIpv6AdvancedSrcOp, hwAclIpv6AdvancedSrcPort1, hwAclIpv6AdvancedSrcPort2,
hwAclIpv6AdvancedDestIp, hwAclIpv6AdvancedDestPrefix, hwAclIpv6AdvancedDestOp, hwAclIpv6AdvancedDestPort1, hwAclIpv6AdvancedDestPort2,
hwAclIpv6AdvancedPrecedence, hwAclIpv6AdvancedTos, hwAclIpv6AdvancedDscp, hwAclIpv6AdvancedEstablish, hwAclIpv6AdvancedTimeRangeIndex,
hwAclIpv6AdvancedIcmpType, hwAclIpv6AdvancedIcmpCode, hwAclIpv6AdvancedFragment, hwAclIpv6AdvancedLog, hwAclIpv6AdvancedEnable,
hwAclIpv6AdvancedCount, hwAclIpv6AdvancedVrfName, hwAclIpv6AdvancedRowStatus, hwAclEthernetFrameAct, hwAclEthernetFrameType,
hwAclEthernetFrameTypeMask, hwAclEthernetFrameSrcMac, hwAclEthernetFrameSrcMacMask, hwAclEthernetFrameDstMac, hwAclEthernetFrameDstMacMask,
hwAclEthernetFrameTimeRangeIndex, hwAclEthernetFrameLog, hwAclEthernetFrameEnable, hwAclEthernetFrameCount,
hwAclEthernetFrameRowStatus, hwAclEthernetFrameRule8021p, hwAclEthernetFrameRuleCVlan8021p,
hwAclIpv6NumGroupMatchOrder, hwAclIpv6NumGroupSubitemNum, hwAclIpv6NumGroupCountClear, hwAclIpv6NumGroupRowStatus, hwAclIpv6NumGroupAclName,
hwAclIpv6IfAct, hwAclIpv6IfIndex, hwAclIpv6IfAny, hwAclIpv6IfTimeRangeIndex, hwAclIpv6IfLog, hwAclIpv6IfEnable, hwAclIpv6IfCount, hwAclIpv6IfRowStatus,
hwAclMplsAct, hwAclMplsExp1, hwAclMplsExp2,
hwAclMplsExp3, hwAclMplsExp4, hwAclMplsLabel1, hwAclMplsLabel2, hwAclMplsLabel3,
hwAclMplsLabel4, hwAclMplsTTLOP1, hwAclMplsTTL1Begin, hwAclMplsTTL1End,
hwAclMplsTTLOP2, hwAclMplsTTL2Begin, hwAclMplsTTL2End,
hwAclMplsTTLOP3, hwAclMplsTTL3Begin, hwAclMplsTTL3End, hwAclMplsRowStatus, hwAclMplsCount}
STATUS current
DESCRIPTION
"A collection of objects providing mandatory acl information."
::= { hwAclMibGroups 1 }
END
View Git Blame Copy Permalink