x
/
compass-core
Code Issues Proposed changes
compass-core/mibs/HUAWEI-BFD-MIB.mib

3129 lines
118 KiB
Plaintext
Raw Blame History

-- =================================================================
-- Copyright (C) 2011 by HUAWEI TECHNOLOGIES. All rights reserved.
-- Description: MIB interface of BFD protocol configuration.
-- The Bidirectional Forwarding Detection (BFD) protocol
-- is standardized by the IETF. BFD detects the
-- traffic forwarding capability of the link or system by
-- quickly sending BFD control packets (the UDP packets in
-- a specified format) at intervals between two nodes.
-- Reference:
-- Version: V1.25
--
-- =================================================================
HUAWEI-BFD-MIB DEFINITIONS ::= BEGIN
IMPORTS
hwDatacomm
FROM HUAWEI-MIB
EnabledStatus
FROM P-BRIDGE-MIB
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
FROM SNMPv2-CONF
IpAddress, Integer32, Unsigned32, Counter32, OBJECT-TYPE,
MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
RowStatus, TEXTUAL-CONVENTION, TruthValue, DisplayString
FROM SNMPv2-TC
Ipv6Address
FROM IPV6-TC
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB;
hwBFDMIB MODULE-IDENTITY
LAST-UPDATED "201104270000Z"
ORGANIZATION "Huawei Technologies Co.,Ltd."
CONTACT-INFO
"Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
"
DESCRIPTION
"MIB interface of BFD protocol configuration.
The Bidirectional Forwarding Detection (BFD) protocol
is standardized by the IETF. BFD detects the
traffic forwarding capability of the link or system by
quickly sending BFD control packets (the UDP packets in
a specified format) at intervals between two nodes.
"
-- Revision history
REVISION "201108170000Z"
DESCRIPTION "V1.25, add hwBfdSessBindAppTypeMask."
REVISION "201107140000Z"
DESCRIPTION "V1.24, add hwBfdDynamicSessionTos for dynamic session tos."
REVISION "201105110000Z"
DESCRIPTION "V1.23, modified BfdInterval to Integer32."
REVISION "201104270000Z"
DESCRIPTION "V1.22, removed the range of hwBfdSessActualRxInterval, hwBfdSessActualTxInterval, added the default value of hwBfdAdminStatus, hwBfdSessConfWTRInterval, hwBfdSessDetectMult, hwBfdSessDiscrAuto, hwBfdSessDynamicNumber, hwBfdSessInterfaceLimitNumber, hwBfdSessLimitNumber, hwBfdSessStaticNumber, hwBfdVersionNumber."
REVISION "201104130000Z"
DESCRIPTION "V1.21, modified the description of hwBfdIfConfEnable, hwBfdSessConfWTRInterval, hwBfdSessConfPSTFlag."
REVISION "201101120000Z"
DESCRIPTION "V1.20, modified for bfd mib standardization."
REVISION "201010200000Z"
DESCRIPTION "V1.19, Updated the description and format."
REVISION "201008250000Z"
DESCRIPTION "V1.18, modified the trap nodes of hwBfdSessGroupUpTrap and hwBfdSessGroupDownTrap.
Updated the description and format."
REVISION "201008020000Z"
DESCRIPTION "V1.17, modified BfdInterval to Unsigned32."
REVISION "201008020000Z"
DESCRIPTION "V1.16, modified hwBfdSessConfRemoteDiscr and hwBfdSessRemoteDiscr's range from 1...16384 to 0...4294967295."
REVISION "201007220000Z"
DESCRIPTION "V1.15, modified the description and format."
REVISION "201005190000Z"
DESCRIPTION "V1.14, modified syntax of hwBfdSessPerfLastSessDownTime and hwBfdSessionPerStartTime."
REVISION "201004250000Z"
DESCRIPTION "V1.13, modified description of all leaves."
REVISION "201004120000Z"
DESCRIPTION "V1.12, updated the description and format."
REVISION "201002120000Z"
DESCRIPTION "V1.11, modified syntax of hwBfdSessPerfLastSessDownTime and hwBfdSessionPerStartTime."
REVISION "201001130000Z"
DESCRIPTION "V1.10, added four trap nodes of hwBfdSessUpTrap, hwBfdSessDownTrap, hwBfdSessGroupUpTrap
and hwBfdSessGroupDownTrap."
REVISION "200912240000Z"
DESCRIPTION "V1.09, changed the range of leaves hwBfdSessConfDesiredMinRxInterval and
hwBfdSessConfDesiredMinRxInterval."
REVISION "200911270000Z"
DESCRIPTION "V1.08, changed the range of leaf hwBfdSessRemoteDiscr as 0-4294967295 and deleted the trap nodes hwBfdSessUp and hwBfdSessDown."
REVISION "200903040000Z"
DESCRIPTION "V1.07, added flagNoPW, entireDynamic, staticAuto enum."
REVISION "200806060000Z"
DESCRIPTION "V1.06, added leaf hwBfdSessConfVlanID in table hwBfdSessionTable and changed the attribute of leaf hwBfdSessConfBindIfIndex as read-create."
REVISION "200604270000Z"
DESCRIPTION "V1.00, initial version."
::= { hwDatacomm 38 }
--
-- Textual conventions
--
BfdInterval ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Bfd Time Interval Type."
SYNTAX Integer32
BfdDiag ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Diagnostic code specifying the local system's reason for
the last session state changed.
"
SYNTAX Integer32
--
-- Node definitions
--
hwBfdScalarsObjects OBJECT IDENTIFIER ::= { hwBFDMIB 1 }
hwBfdVersionNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current version number of the BFD protocol is 1.
Default: 1
"
::= { hwBfdScalarsObjects 1 }
hwBfdAdminStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Describe the administrative status of a BFD protocol.
Options:
1. enabled(1) -denotes that the BFD Process is active on all interface
2. disabled(2) -denotes that the BFD process is disabled on all interfaces
Default: 2
"
::= { hwBfdScalarsObjects 2 }
hwBfdSessLimitNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Define the maximum number of BFD sessions allowed in the logic router.
Default: 0
"
::= { hwBfdScalarsObjects 3 }
hwBfdSessInterfaceLimitNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Define the maximum number of BFD sessions allowed per board.
Default: 0
"
::= { hwBfdScalarsObjects 4 }
hwBfdSessStaticNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BFD static sessions.
Default: 0
"
::= { hwBfdScalarsObjects 5 }
hwBfdSessDynamicNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BFD dynamic sessions.
Default: 0
"
::= { hwBfdScalarsObjects 6 }
hwBfdSessGlobalDefaultIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Define the default multicast IP address used in BFD multicast detection.
Default: 0
"
::= { hwBfdScalarsObjects 7 }
hwBfdEchoPassiveStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The passive Echo function of BFD.
Options:
1. enabled(1) -denotes that the BFD EchoPassive capability is enabled
2. disabled(2) -denotes that the BFD EchoPassive capability is disabled
Default: 2
"
::= { hwBfdScalarsObjects 8 }
hwBfdEchoAclNum OBJECT-TYPE
SYNTAX Unsigned32 (0 | 2000..2999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Acl Number for passive Echo function of BFD.
Default: 0
"
::= { hwBfdScalarsObjects 9 }
hwBfdSessDynamicPingInterval OBJECT-TYPE
SYNTAX Unsigned32 (30..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Define the sending interval of the MPLS echo packet.
Default: 60
Unit: second
"
::= { hwBfdScalarsObjects 10 }
hwBfdSessDynamicSupportPassive OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The capability of automatically creating BFD sessions on the LSP egress.
Options:
1. enabled(1) -denotes that the egress can create BFD sessions
2. disabled(2) -denotes that the egress can not create BFD sessions
Default: 2
"
::= { hwBfdScalarsObjects 11 }
hwBfdSessDelayUpTime OBJECT-TYPE
SYNTAX Unsigned32 (0..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Define delay interval before the session turns to up.
Unit: second
Default: 0
"
::= { hwBfdScalarsObjects 12 }
hwBfdSessMultiDstPort OBJECT-TYPE
SYNTAX Integer32 (0|3784|4784)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination UDP port of multi-hop BFD session. When the
administrative status of BFD protocol is disabled, this value
will be 0.
Default: 3784
"
::= { hwBfdScalarsObjects 13 }
hwBfdTrapSendInterval OBJECT-TYPE
SYNTAX Integer32 (0|1..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Define the sending interval of TRAP message.
Unit: second
Default: 120
"
::= { hwBfdScalarsObjects 14 }
hwBfdLimitDeviceName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The device name which session number reached up limit."
::= { hwBfdScalarsObjects 15 }
hwBfdDynamicSessionTos OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Tos-Exp of dynamic session.
Default: 7
"
::= { hwBfdScalarsObjects 16 }
hwBfdObjects OBJECT IDENTIFIER ::= { hwBFDMIB 2 }
hwBfdIfConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBfdIfConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface configuration table of BFD.
The index of this table is hwBfdIfConfIndex.
"
::= { hwBfdObjects 1 }
hwBfdIfConfEntry OBJECT-TYPE
SYNTAX HwBfdIfConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface configuration table of BFD.
The index of this entry is hwBfdIfConfIndex.
"
INDEX { hwBfdIfConfIndex }
::= { hwBfdIfConfTable 1 }
HwBfdIfConfEntry ::=
SEQUENCE {
hwBfdIfConfIndex
Integer32,
hwBfdIfConfName
OCTET STRING,
hwBfdIfConfEnable
Integer32,
hwBfdIfConfDeleting
Integer32,
hwBfdIfConfAvailable
Integer32,
hwBfdIfConfSessCnt
Integer32,
hwBfdIfConfRowStatus
RowStatus
}
hwBfdIfConfIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is the configuration index of this interface.
This index is automatically allocated inside the system
and is not user-configurable.
"
::= { hwBfdIfConfEntry 1 }
hwBfdIfConfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..47))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It is the name of this Interface."
::= { hwBfdIfConfEntry 2 }
hwBfdIfConfEnable OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The flag whether the interface has enabled BFD.
Options:
1. disable(0) -Indicates that the interface has disabled BFD
2. enable(1) -Indicates that the interface has enabled BFD
"
::= { hwBfdIfConfEntry 3 }
hwBfdIfConfDeleting OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The flag that whether the interface is in deleting.
Options:
1. notDeleted(0) -the interface is not deleted
2. deleted(1) -the interface is deleted
"
::= { hwBfdIfConfEntry 4 }
hwBfdIfConfAvailable OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The flag that whether the interface is available.
Options:
1. notAvailable(0) -the interface is not available
2. available(1) -the interface is available
"
::= { hwBfdIfConfEntry 5 }
hwBfdIfConfSessCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of sessions that has been bound to this interface."
::= { hwBfdIfConfEntry 6 }
hwBfdIfConfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to manage the creation and deletion of conceptual rows."
::= { hwBfdIfConfEntry 7 }
hwBfdSessionConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBfdSessionConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"BFD Session Configuration Table. Use this table to get/configure BFD sessions.
The index of this table is hwBfdSessConfName.
"
::= { hwBfdObjects 2 }
hwBfdSessionConfEntry OBJECT-TYPE
SYNTAX HwBfdSessionConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"BFD Session Configuration Table. Use this table to get/configure BFD sessions.
The index of this entry is hwBfdSessConfName.
"
INDEX { hwBfdSessConfName }
::= { hwBfdSessionConfTable 1 }
HwBfdSessionConfEntry ::=
SEQUENCE {
hwBfdSessConfName
OCTET STRING,
hwBfdSessConfMIndex
Unsigned32,
hwBfdSessConfLocalDiscr
Unsigned32,
hwBfdSessConfRemoteDiscr
Unsigned32,
hwBfdSessConfPeerAddr
IpAddress,
hwBfdSessConfBindIfIndex
Unsigned32,
hwBfdSessConfBindIfName
OCTET STRING,
hwBfdSessConfDemandEnable
Integer32,
hwBfdSessConfDemandTimerInterval
Unsigned32,
hwBfdSessConfDetectMult
Unsigned32,
hwBfdSessConfDesiredMinRxInterval
BfdInterval,
hwBfdSessConfDesiredMinTxInterval
BfdInterval,
hwBfdSessConfWTRInterval
Integer32,
hwBfdSessConfTOS
Integer32,
hwBfdSessConfPSTFlag
Integer32,
hwBfdSessConfCommitFlag
Integer32,
hwBfdSessConfAdminStatus
Integer32,
hwBfdSessConfRowStatus
RowStatus,
hwBfdSessConfSourceAddr
IpAddress,
hwBfdSessConfVrfIndex
Unsigned32,
hwBfdSessConfVPNName
OCTET STRING,
hwBfdSessConfDefaultIp
INTEGER,
hwBfdSessConfPISFlag
INTEGER,
hwBfdSessConfBindType
INTEGER,
hwBfdSessConfNextHop
IpAddress,
hwBfdSessConfStaticLspName
OCTET STRING,
hwBfdSessConfPWSecondaryFlag
INTEGER,
hwBfdSessConfTunnelDetectType
INTEGER,
hwBfdSessConfVcId
Unsigned32,
hwBfdSessConfVsiName
OCTET STRING,
hwBfdSessConfVsiPeerAddr
IpAddress,
hwBfdSessConfDiscrAuto
EnabledStatus,
hwBfdSessConfPeerIpv6Addr
Ipv6Address,
hwBfdSessConfSourceIpv6Addr
Ipv6Address,
hwBfdSessConfIpv6NextHop
Ipv6Address,
hwBfdSessConfIsIpv6Addr
TruthValue,
hwBfdSessConfKeychainName
OCTET STRING,
hwBfdSessConfMeticulous
EnabledStatus,
hwBfdSessConfLooseAuthentication
TruthValue,
hwBfdSessConfOneArmEcho
EnabledStatus,
hwBfdSessConfMinEchoRxInterval
Unsigned32,
hwBfdSessConfPWTtlMode
INTEGER,
hwBfdSessConfPWTtl
Integer32,
hwBfdSessConfRemotePeerIpType
InetAddressType,
hwBfdSessConfRemotePeerIp
InetAddress,
hwBfdSessConfSelectBoard
DisplayString,
hwBfdSessConfPWSPE
INTEGER,
hwBfdSessConfPWTrackIfName
DisplayString,
hwBfdSessConfIsPWTrackIf
EnabledStatus,
hwBfdSessConfEncapsulationType
DisplayString,
hwBfdSessConfPEVid
Unsigned32,
hwBfdSessConfCEVid
Unsigned32
}
hwBfdSessConfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..15))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is the name of this configuration model."
::= { hwBfdSessionConfEntry 1 }
hwBfdSessConfMIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is the configuration index of this session."
::= { hwBfdSessionConfEntry 2 }
hwBfdSessConfLocalDiscr OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Define the local discriminator of the BFD session."
::= { hwBfdSessionConfEntry 3 }
hwBfdSessConfRemoteDiscr OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Define the remote discriminator of the BFD session."
::= { hwBfdSessionConfEntry 4 }
hwBfdSessConfPeerAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Define the IP address of the peer in the BFD session."
::= { hwBfdSessionConfEntry 5 }
hwBfdSessConfBindIfIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is the index of the binding interface in the BFD configuration."
::= { hwBfdSessionConfEntry 6 }
hwBfdSessConfBindIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..47))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It is the name of the binding interface in the BFD configuration."
::= { hwBfdSessionConfEntry 7 }
hwBfdSessConfDemandEnable OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It is the flag of the BFD demand mode.
Options:
1. disabled(0) -disable the BFD demand mode
2. enabled(1) -enable the BFD demand mode
"
DEFVAL { 0 }
::= { hwBfdSessionConfEntry 8 }
hwBfdSessConfDemandTimerInterval OBJECT-TYPE
SYNTAX Unsigned32 (0 | 500..300000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Define the detecting interval in the BFD session with the demand mode.
Unit: millisecond
"
::= { hwBfdSessionConfEntry 9 }
hwBfdSessConfDetectMult OBJECT-TYPE
SYNTAX Unsigned32 (3..50)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It is Detect time multiplier of the configuration. The
negotiated transmit interval, multiplied by this value,
provides the detection time for the transmitting
system in Asynchronous mode.
"
::= { hwBfdSessionConfEntry 10 }
hwBfdSessConfDesiredMinRxInterval OBJECT-TYPE
SYNTAX BfdInterval (1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the minimum interval of the configuration,in
milliseconds, between received BFD Control packets
that this system is capable of supporting.
Unit: millisecond
"
::= { hwBfdSessionConfEntry 11 }
hwBfdSessConfDesiredMinTxInterval OBJECT-TYPE
SYNTAX BfdInterval (1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the minimum interval of the configuration,
in milliseconds, that the local system would
like to use when transmitting BFD Control packets.
Unit: millisecond
"
::= { hwBfdSessionConfEntry 12 }
hwBfdSessConfWTRInterval OBJECT-TYPE
SYNTAX Integer32 (0..60)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The wait-to-restore (WTR) time of the BFD session.
The event that indicates the session changing into the Up
state is reported to the application program only after
the WTR times out.
Unit: minute
"
DEFVAL { 0 }
::= { hwBfdSessionConfEntry 13 }
hwBfdSessConfTOS OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the TOS value of bfd packet."
DEFVAL { 7 }
::= { hwBfdSessionConfEntry 14 }
hwBfdSessConfPSTFlag OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The PST flag of the BFD session configuration.
It indicates the status association between the current BFD
session and the interface bound to the session.
Options:
1. disabled(0) -indicates that the PST capability of the BFD session is disabled
2. enabled(1) -indicates that the PST capability of the BFD session is enabled
"
DEFVAL { 0 }
::= { hwBfdSessionConfEntry 15 }
hwBfdSessConfCommitFlag OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It is the commit flag of the configuration entry.
Options:
1. notCommit(0) -not commit
2. commit(1) -commit
"
::= { hwBfdSessionConfEntry 16 }
hwBfdSessConfAdminStatus OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A BFD session can be administratively enabled or disabled.
The AdminStatus field indicates the BFD session status.
Options:
1. 0 -disable
2. 1 -enable
"
::= { hwBfdSessionConfEntry 17 }
hwBfdSessConfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to manage the creation and deletion of conceptual rows."
::= { hwBfdSessionConfEntry 18 }
hwBfdSessConfSourceAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Define the source IP address of the BFD session."
::= { hwBfdSessionConfEntry 19 }
hwBfdSessConfVrfIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the VPN interface."
::= { hwBfdSessionConfEntry 20 }
hwBfdSessConfVPNName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of VPN interface."
::= { hwBfdSessionConfEntry 21 }
hwBfdSessConfDefaultIp OBJECT-TYPE
SYNTAX INTEGER
{
no(1),
yes(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"BFD session use default multicast IP as the detect peer-ip
Options:
1. no(1) -do not use the default multicast IP
2. yes(2) -use the default multicast IP
"
DEFVAL { 1 }
::= { hwBfdSessionConfEntry 22 }
hwBfdSessConfPISFlag OBJECT-TYPE
SYNTAX INTEGER
{
false(1),
true(2),
subif(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of BFD session is associated with the state of the binding interface
Options:
1. false(1) -do not associate with interface state
2. true(2) -associate with interface state
3. subif(3) -associate with interface and correlative sub interface
"
DEFVAL { 1 }
::= { hwBfdSessionConfEntry 23 }
hwBfdSessConfBindType OBJECT-TYPE
SYNTAX INTEGER
{
interfaceIp(1),
peerIp(2),
sourceIp(3),
ifAndSourceIp(4),
fec(5),
tunnelIf(6),
ospf(7),
isis(8),
ldpLsp(9),
staticLsp(10),
teLsp(11),
teTunnel(12),
pw(13),
vsiPw(15)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The binding type of the BFD session.
Options:
1. interfaceIp(1) -BFD for IP with peer-ip and interface
2. peerIp(2) -BFD for IP only with peer-ip
3. sourceIp(3) -BFD for IP with peer-ip and source-ip
4. ifAndSourceIp(4) -BFD for IP with peer-ip, interface and source-ip
5. fec(5) -BFD for FEC(NOT support now)
6. tunnelIf(6) -BFD for Tunnel interface(NOT support now)
7. ospf(7) -BFD for OSPF
8. isis(8) -BFD for ISIS
9. ldpLsp(9) -BFD for LDP-LSP
10. staticLsp(10) -BFD for static LSP
11. teLsp(11) -BFD for TE-LSP
12. teTunnel(12) -BFD for TE-Tunnel
13. pw(13) -BFD for PW
14. vsiPw(15) -BFD for VSI PW
"
::= { hwBfdSessionConfEntry 24 }
hwBfdSessConfNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It is the next hop of the BFD session."
::= { hwBfdSessionConfEntry 25 }
hwBfdSessConfStaticLspName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It is the static LSP name of the BFD session."
::= { hwBfdSessionConfEntry 26 }
hwBfdSessConfPWSecondaryFlag OBJECT-TYPE
SYNTAX INTEGER
{
flagMasterPW(1),
flagSecondaryPW(2),
flagNoPW(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The role of the PW bound with BFD session.
Options:
1. flagMasterPW(1) -master PW
2. flagSecondaryPW(2)-secondary PW
3. flagNoPW(3) -no PW
"
DEFVAL { 1 }
::= { hwBfdSessionConfEntry 27 }
hwBfdSessConfTunnelDetectType OBJECT-TYPE
SYNTAX INTEGER
{
flagBothDown(1),
flagNeighborDown(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set the failure notifies policy type.
Options:
1. flagBothDown(1) -notify applications when detecting both Detect-Down and Neighbor-Down
2. flagNeighborDown(2) -notify applications only when detecting Neighbor-Down
"
DEFVAL { 1 }
::= { hwBfdSessionConfEntry 28 }
hwBfdSessConfVcId OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It is the ID of VC."
::= { hwBfdSessionConfEntry 29 }
hwBfdSessConfVsiName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It is the name of VSI."
::= { hwBfdSessionConfEntry 30 }
hwBfdSessConfVsiPeerAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It is the peer-ip of VSI."
::= { hwBfdSessionConfEntry 31 }
hwBfdSessConfDiscrAuto OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Describe whether the discriminator can be auto allocated.
Options:
1.enabled(1) -the discriminator can be allocated automatically
2.disabled(2) -the discriminator can not be allocated automatically
"
DEFVAL { disabled }
::= { hwBfdSessionConfEntry 32 }
hwBfdSessConfPeerIpv6Addr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Define the peer IPv6 address of the BFD session."
::= { hwBfdSessionConfEntry 33 }
hwBfdSessConfSourceIpv6Addr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Define the source IPv6 address of the BFD session."
::= { hwBfdSessionConfEntry 34 }
hwBfdSessConfIpv6NextHop OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is the next hop of the BFD session."
::= { hwBfdSessionConfEntry 35 }
hwBfdSessConfIsIpv6Addr OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether the peer address of the BFD session is IPv6 address."
DEFVAL { false }
::= { hwBfdSessionConfEntry 36 }
hwBfdSessConfKeychainName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..47))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify the name of the keychain for authentication."
::= { hwBfdSessionConfEntry 37 }
hwBfdSessConfMeticulous OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether enable meticulous authentication for MD5 or SHA-1 type.
Options:
1. enabled(1) -enable meticulous authentication for MD5 or SHA-1 type
2. disabled(2) -disabled meticulous authentication for MD5 or SHA-1 type
"
DEFVAL { disabled }
::= { hwBfdSessionConfEntry 38 }
hwBfdSessConfLooseAuthentication OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether loose authentication check.
Options:
1.True(1) -loose-check
2.False(2) -do not loose-check
"
::= { hwBfdSessionConfEntry 39 }
hwBfdSessConfOneArmEcho OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object identifies whether a session works in one-arm-echo mode.
Options:
1. enabled(1) -indicates that the session works in one-arm-echo mode
2. disabled(2) -indicates that the session does not work in one-arm-echo mode
"
DEFVAL { disabled }
::= { hwBfdSessionConfEntry 40 }
hwBfdSessConfMinEchoRxInterval OBJECT-TYPE
SYNTAX Unsigned32 (0|1..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object identifies the minimum interval between received BFD
Control packets, in milliseconds.This value reflects the capability of receiving
BFD Control packets.
Unit: millisecond
"
::= { hwBfdSessionConfEntry 41 }
hwBfdSessConfPWTtlMode OBJECT-TYPE
SYNTAX INTEGER
{
config(1),
auto(2),
default(3),
none(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object identifies the configuration mode of a TTL used by
the BFD session for PW.
Options:
1. config(1) -indicates that the TTL is manually set
2. auto(2) -indicates that the TTL is automatically calculated based on an IP address
3. default(3)-indicates that the TTL is 255 by default
4. none(4) -indicates that the TTL is not in PW mode
"
::= { hwBfdSessionConfEntry 42 }
hwBfdSessConfPWTtl OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object identifies the TTL used by the BFD session for PW.
The vlaue is configurable only when the configuration mode of a TTL is config.
"
::= { hwBfdSessionConfEntry 43 }
hwBfdSessConfRemotePeerIpType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object identifies the type of the destination address of the BFD
session for PW.
"
::= { hwBfdSessionConfEntry 44 }
hwBfdSessConfRemotePeerIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object identifies the destination IP address of the BFD session
for PW.
"
::= { hwBfdSessionConfEntry 45 }
hwBfdSessConfSelectBoard OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..47))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the main processing board of a BFD session."
::= { hwBfdSessionConfEntry 46 }
hwBfdSessConfPWSPE OBJECT-TYPE
SYNTAX INTEGER
{
upe(1),
spe(2),
none(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object identifies the node on which a BFD session is set up.
The values are as follows.
Options:
1. upe(1) -indicates that a BFD session is set up on a UPE to detect a PW
2. spe(2) -indicates that a BFD session is set up on an SPE to detect a PW
3. none(3) -indicates that a BFD session does not detect a PW
Default: none
"
::= { hwBfdSessionConfEntry 47 }
hwBfdSessConfPWTrackIfName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the interface monitored by the BFD session for PW."
::= { hwBfdSessionConfEntry 48 }
hwBfdSessConfIsPWTrackIf OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object identifies whether the BFD session for
PW monitors an interface. The values are as follows.
Options:
1. enabled(1) -enables the BFD session for PW to monitor the interface
2. disabled(2)-disables the BFD session for PW from monitoring the interface
"
::= { hwBfdSessionConfEntry 49 }
hwBfdSessConfEncapsulationType OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..63))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object identifies the VC encapsulation type on an SPE.
The values are as follows:
fr
atm-aal5-sdu
atm-trans-cell
vlan
ethernet
hdlc
ppp
atm-nto1-vcc
atm-nto1-vpc
ip-layer2
atm-1to1-vcc
atm-1to1-vpc
atm-aal5-pdu
satop-e1
satop-t1
esopsn-basic
ip-interworking
"
::= { hwBfdSessionConfEntry 50 }
hwBfdSessConfPEVid OBJECT-TYPE
SYNTAX Unsigned32 (0..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object identifies the outer tag of a sub-interface
for QinQ VLAN tag termination or the VLAN ID of a sub-interface for
dot1q VLAN tag termination.
"
::= { hwBfdSessionConfEntry 51 }
hwBfdSessConfCEVid OBJECT-TYPE
SYNTAX Unsigned32 (0..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object identifies the inner tag in QinQ packets."
::= { hwBfdSessionConfEntry 52 }
hwBfdSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBfdSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BFD Session Table describes the BFD sessions.
The index of this table is hwBfdSessIndex.
"
::= { hwBfdObjects 3 }
hwBfdSessionEntry OBJECT-TYPE
SYNTAX HwBfdSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BFD Session Table describes the BFD sessions.
The index of this entry is hwBfdSessIndex.
"
INDEX { hwBfdSessIndex }
::= { hwBfdSessionTable 1 }
HwBfdSessionEntry ::=
SEQUENCE {
hwBfdSessIndex
Unsigned32,
hwBfdSessMIndex
Unsigned32,
hwBfdSessBindVRRP
Integer32,
hwBfdSessCfgName
OCTET STRING,
hwBfdSessPeerAddr
IpAddress,
hwBfdSessBindIfIndex
Integer32,
hwBfdSessBindIfName
OCTET STRING,
hwBfdSessLocalDiscr
Unsigned32,
hwBfdSessRemoteDiscr
Unsigned32,
hwBfdSessOperMode
Integer32,
hwBfdSessDetectMult
Unsigned32,
hwBfdSessDemandTimerInterval
BfdInterval,
hwBfdSessActualRxInterval
BfdInterval,
hwBfdSessActualTxInterval
BfdInterval,
hwBfdSessWTRInterval
Integer32,
hwBfdSessTOS
Integer32,
hwBfdSessState
Integer32,
hwBfdSessDiag
Integer32,
hwBfdSessSourceAddr
IpAddress,
hwBfdSessVrfIndex
Unsigned32,
hwBfdSessVPNName
OCTET STRING,
hwBfdSessType
INTEGER,
hwBfdSessBindAppType
INTEGER,
hwBfdSessDefaultIp
INTEGER,
hwBfdSessPISFlag
INTEGER,
hwBfdSessBindType
INTEGER,
hwBfdSessNextHop
IpAddress,
hwBfdSessStaticLspName
OCTET STRING,
hwBfdSessLspIndex
Unsigned32,
hwBfdSessPWSecondaryFlag
INTEGER,
hwBfdSessTunnelDetectType
INTEGER,
hwBfdSessVcId
Unsigned32,
hwBfdSessVsiName
OCTET STRING,
hwBfdSessVsiPeerAddr
IpAddress,
hwBfdSessDiscrAuto
EnabledStatus,
hwBfdSessPeerIpv6Addr
Ipv6Address,
hwBfdSessSourceIpv6Addr
Ipv6Address,
hwBfdSessIpv6NextHop
Ipv6Address,
hwBfdSessIsIPv6Addr
TruthValue,
hwBfdSessMeticulous
EnabledStatus,
hwBfdSessLooseAuthentication
TruthValue,
hwBfdSessAuthenticationStatus
Integer32,
hwBfdSessOneArmEcho
EnabledStatus,
hwBfdSessPWTtlMode
INTEGER,
hwBfdSessPWTtl
Integer32,
hwBfdSessRemotePeerIpType
InetAddressType,
hwBfdSessRemotePeerIp
InetAddress,
hwBfdSessSelectBoard
DisplayString,
hwBfdSessPWSPE
INTEGER,
hwBfdSessPWTrackIfName
DisplayString,
hwBfdSessIsPWTrackIf
EnabledStatus,
hwBfdSessEncapsulationType
DisplayString,
hwBfdSessPEVid
Unsigned32,
hwBfdSessCEVid
Unsigned32,
hwBfdSessPeerInetAddrType
InetAddressType,
hwBfdSessPeerInetAddr
InetAddress,
hwBfdSessInetNextHopType
InetAddressType,
hwBfdSessInetNextHop
InetAddress,
hwBfdSessBindAppTypeMask
OCTET STRING
}
hwBfdSessIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is unique and the Index of this session.
This index is automatically allocated inside the system
and is not user-configurable.
"
::= { hwBfdSessionEntry 1 }
hwBfdSessMIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicate the configuration has Main Index."
::= { hwBfdSessionEntry 2 }
hwBfdSessBindVRRP OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describe the capability of bound with VRRP for the BFD session.
Options:
1. notBind(0) -not bind
2. bind(1) -bind
"
::= { hwBfdSessionEntry 3 }
hwBfdSessCfgName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicate the name of the session which
will be display course information or statistic
information of the session.
"
::= { hwBfdSessionEntry 4 }
hwBfdSessPeerAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Define the peer IP address of the BFD session."
::= { hwBfdSessionEntry 5 }
hwBfdSessBindIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is the index of the binding interface in the BFD session"
::= { hwBfdSessionEntry 6 }
hwBfdSessBindIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..47))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is the name of the binding interface in the BFD session."
::= { hwBfdSessionEntry 7 }
hwBfdSessLocalDiscr OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique, nonzero discriminator value generated by the
transmitting system, used to demultiplex multiple BFD
sessions between the same pair of system.
"
::= { hwBfdSessionEntry 8 }
hwBfdSessRemoteDiscr OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The discriminator received from the corresponding remote
system. This field reflects back the received value of My
Discriminator, or is zero if that value is unknown.
"
::= { hwBfdSessionEntry 9 }
hwBfdSessOperMode OBJECT-TYPE
SYNTAX Integer32 (0..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describe the current operating mode configured with the BFD session.
Options:
1. 0 -asynchronous mode with echo function
2. 1 -asynchronous mode without echo function
3. 2 -demand mode with echo function
4. 3 -demand mode without echo function
5. 4 -asynchronous One-arm-echo mode
"
::= { hwBfdSessionEntry 10 }
hwBfdSessDetectMult OBJECT-TYPE
SYNTAX Unsigned32 (3..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Detect time multiplier. The negotiated transmit interval,
multiplied by this value, provides the detection time for
the transmitting system in Asynchronous mode.
Default: 3
"
::= { hwBfdSessionEntry 11 }
hwBfdSessDemandTimerInterval OBJECT-TYPE
SYNTAX BfdInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is the detecting interval in the BFD session with the demand mode.
Unit: millisecond
"
::= { hwBfdSessionEntry 12 }
hwBfdSessActualRxInterval OBJECT-TYPE
SYNTAX BfdInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the minimum interval, in milliseconds, between
received BFD Control packets that this system is capable
of supporting.
Unit: millisecond
"
::= { hwBfdSessionEntry 13 }
hwBfdSessActualTxInterval OBJECT-TYPE
SYNTAX BfdInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the minimum interval, in milliseconds, that the
local system would like to use when transmitting BFD
Control packets.
Unit: millisecond
"
::= { hwBfdSessionEntry 14 }
hwBfdSessWTRInterval OBJECT-TYPE
SYNTAX Integer32 (0..60)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The WTR interval of the BFD session.
Unit: minute
"
::= { hwBfdSessionEntry 15 }
hwBfdSessTOS OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the TOS value of bfd packet."
::= { hwBfdSessionEntry 16 }
hwBfdSessState OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describe the current state of the BFD session.
Options:
1. 0 -admin down
2. 1 -down
3. 2 -init
4. 3 -up
"
::= { hwBfdSessionEntry 17 }
hwBfdSessDiag OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A diagnostic code specifying the local system's reason for
the last session state change.
Options:
1. 0 -no diagnostic
2. 1 -control detection time expired
3. 2 -echo function failed
4. 3 -neighbor signaled session down
5. 4 -forwarding plane reset
6. 5 -path down
7. 6 -concatenated path down
8. 7 -administratively down
9. 8 -reverse concatenated path down
10. 9 -neighbor signaled session down (receive admindown)
11. 10-31 -reserved for future use
"
::= { hwBfdSessionEntry 18 }
hwBfdSessSourceAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source address of the session."
::= { hwBfdSessionEntry 19 }
hwBfdSessVrfIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the VPN interface."
::= { hwBfdSessionEntry 20 }
hwBfdSessVPNName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of VPN interface."
::= { hwBfdSessionEntry 21 }
hwBfdSessType OBJECT-TYPE
SYNTAX INTEGER
{
static(1),
dynamic(2),
entireDynamic(3),
auto(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the BFD session.
Options:
1. static(1) -static
2. dynamic(2) -dynamic
3. entireDynamic(3) -entire dynamic
4. auto(4) -auto
"
::= { hwBfdSessionEntry 22 }
-- other or unknown
hwBfdSessBindAppType OBJECT-TYPE
SYNTAX INTEGER
{
noApplication(1),
vrrp(2),
ifnet(3),
vrrpAndIfnet(4),
bgp(5),
ospf(6),
bgpAndOspf(7),
oamLspmL2vpn(8),
oamTnlL2vpn(9),
lspmL2vpnTnlps(10),
oamMplsfwL2vpn(11),
isis(12),
vsiPw(13),
vrrpOamLspmL2vpn(14),
vrrpOamTnlL2vpn(15),
vrrpLspmL2vpnTnlps(16),
vrrpOamMplsfwL2vpn(17),
pim(18),
bgpIsis(19),
bgpPim(20),
ospfIsis(21),
ospfPim(22),
isisPim(23),
bgpOspfIsis(24),
bgpOspfPim(25),
bgpIsisPim(26),
ospfIsisPim(27),
bgpOspfIsisPim(28),
bgp6(29),
ospfv3(30),
isis6(31),
pim6(32),
bgp6Ospfv3(33),
bgp6Isis6(34),
bgp6Pim6(35),
ospfv3Isis6(36),
ospfv3Pim6(37),
isis6Pim6(38),
bgp6Ospfv3Isis6(39),
bgp6Ospfv3Pim6(40),
bgp6Isis6Pim6(41),
ospfv3Isis6Pim6(42),
bgp6Ospfv3Isis6Pim6(43),
auto(44),
autoIsis(45),
autoOspf(46),
autoBgp(47),
autoPim(48),
autoIsisOspf(49),
autoIsisBgp(50),
autoIsisPim(51),
autoOspfBgp(52),
autoOspfPim(53),
autoBgpPim(54),
autoIsisOspfBgp(55),
autoIsisOspfBgpPim(56),
autoIsis6(57),
autoOspfv3(58),
autoBgp6(59),
autoPim6(60),
autoIsis6Ospfv3(61),
autoIsis6Bgp6(62),
autoIsis6Pim6(63),
autoOspfv3Bgp6(64),
autoOspfv3Pim6(65),
autoBgp6Pim6(66),
autoIsis6Ospfv3Bgp6(67),
autoIsis6Ospfv3Bgp6Pim6(68),
etrunk(69),
etrunkIfnet(70),
etrunkVrrp(71),
etrunkVrrpIfnet(72),
etrunkOamLspmL2vpn(73),
etrunkOamTnlL2vpn(74),
etrunkLspmL2vpnTnlps(75),
etrunkOamMplsfwL2vpn(76),
etrunkvsiPw(77),
etrunkOamLspmL2vpnVrrp(78),
etrunkOamTnlL2vpnVrrp(79),
etrunkLspmL2vpnTnlpsVrrp(80),
etrunkOamMplsfwL2vpnVrrp(81),
rip(82),
bgpRip(83),
ospfRip(84),
isisRip(85),
pimRip(86),
bgpOspfRip(87),
bgpIsisRip(88),
bgpPimRip(89),
ospfIsisRip(90),
ospfPimRip(91),
isisPimRip(92),
bgpOspfIsisRip(93),
bgpOspfPimRip(94),
ospfIsisPimRip(95),
autoRip(96),
autoBgpRip(97),
autoOspfRip(98),
autoIsisRip(99),
autoPimRip(100),
autoBgpOspfRip(101),
autoBgpIsisRip(102),
autoBgpPimRip(103),
autoOspfIsisRip(104),
autoOspfPimRip(105),
autoIsisPimRip(106),
autoBgpOspfIsisRip(107),
autoBgpOspfPimRip(108),
autoOspfIsisPimRip(109),
autoIsisOspfBgpPimVrrp(110),
autoIsisOspfPimVrrp(111),
autoIsisOspfBgpVrrp(112),
autoIsisBgpPimVrrp(113),
autoOspfBgpPimVrrp(114),
autoIsisOspfVrrp(115),
autoIsisBgpVrrp(116),
autoOspfBgpVrrp(117),
autoIsisPimVrrp(118),
autoOspfPimVrrp(119),
autoBgpPimVrrp(120),
autoIsisVrrp(121),
autoOspfVrrp(122),
autoBgpVrrp(123),
autoPimVrrp(124),
autoVrrp(125),
autoVrrpBgp6(126),
autoOspfv3Isis6Pim6(127),
autoOspfBgpPim(128),
autoIsisOspfPim(129),
autoIsisPimBgp(130),
bgpOspfIsisPimRip(131),
autoBgpOspfIsisPimRip(132),
bgpRsvp(133),
ospfRsvp(134),
isisRsvp(135),
pimRsvp(136),
ripRsvp(137),
bgpOspfRsvp(138),
bgpIsisRsvp(139),
bgpPimRsvp(140),
bgpRipRsvp(141),
ospfIsisRsvp(142),
ospfPimRsvp(143),
ospfRipRsvp(144),
isisPimRsvp(145),
isisRipRsvp(146),
pimRipRsvp(147),
bgpOspfIsisRsvp(148),
bgpOspfPimRsvp(149),
bgpOspfRipRsvp(150),
bgpIsisPimRsvp(151),
bgpIsisRipRsvp(152),
bgpPimRipRsvp(153),
ospfIsisPimRsvp(154),
ospfIsisRipRsvp(155),
isisPimRipRsvp(156),
bgpOspfIsisPimRsvp(157),
bgpOspfIsisRipRSvp(158),
bgpOspfPimRipRsvp(159),
bgpIsisPimRipRsvp(160),
ospfIsisPimRipRsvp(161),
bgpOspfIsisPimRipRsvp(162),
autoRsvp(163),
autoBgpRsvp(164),
autoOspfRsvp(165),
autoIsisRsvp(166),
autoPimRsvp(167),
autoRipRsvp(168),
autoBgpOspfRsvp(169),
autoBgpIsisRsvp(170),
autoBgpPimRsvp(171),
autoBgpRipRsvp(172),
autoOspfIsisRsvp(173),
autoOspfPimRsvp(174),
autoOspfRipRsvp(175),
autoIsisPimRsvp(176),
autoIsisRipRsvp(177),
autoPimRipRsvp(178),
autoBgpOspfIsisRsvp(179),
autoBgpOspfPimRsvp(180),
autoBgpOspfRipRsvp(181),
autoOspfIsisPimRsvp(182),
autoOspfIsisRipRsvp(183),
autoIsisPimRipRsvp(184),
autoBgpOspfIsisPimRsvp(185),
autoBgpOspfIsisRipRsvp(186),
autoOspfIsisPimRipRsvp(187),
rsvp(188)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Application type that this BFD session has been bound to
Options:
1. noApplication(1) -No application
2. vrrp(2) -VRRP
3. ifnet(3) -IFNET
4. vrrpAndIfnet(4) -VRRP&IFNET
5. bgp(5) -BGP
6. ospf(6) -OSPF
7. bgpAndOspf(7) -BGP&OSPF
8. oamLspmL2vpn(8) -OAM&LSPM&L2VPN (for LDP LSP and static LSP)
9. oamTnlL2vpn(9) -OAM&TUNNEL&L2VPN (for TE_Tunnnel)
10. lspmL2vpnTnlps(10) -LSPM&TUNNEL_PS&L2VPN (for TE_LSP)
11. oamMplsfwL2vpn(11) -OAM&MPLSFW&L2VPN (for PW)
12. isis(12) -ISIS
13. vsiPw(13) -VSIPW (for VSI PW)
14. vrrpOamLspmL2vpn(14) -VRRP&OAM&LSPM&L2VPN
15. vrrpOamTnlL2vpn(15) -VRRP&OAM&TUNNEL&L2VPN
16. vrrpLspmL2vpnTnlps(16) -VRRP&LSPM&TUNNEL_PS&L2VPN
17. vrrpOamMplsfwL2vpn(17) -VRRP&OAM&MPLSFW&L2VPN
18. pim(18) -PIM
19. bgpIsis(19) -BGP&ISIS
20. bgpPim(20) -BGP&PIM
21. ospfIsis(21) -OSPF&ISIS
22. ospfPim(22) -OSPF&PIM
23. isisPim(23) -ISIS&PIM
24. bgpOspfIsis(24) -BGP&OSPF&ISIS
25. bgpOspfPim(25) -BGP&OSPF&PIM
26. bgpIsisPim(26) -BGP&ISIS&PIM
27. ospfIsisPim(27) -OSPF&ISIS&PIM
28. bgpOspfIsisPim(28) -BGPOSPF&ISIS&PIM
29. bgp6(29) -BGP6
30. ospfv3(30) -OSPFV3
31. isis6(31) -ISIS6
32. pim6(32) -PIM6
33. bgp6Ospfv3(33) -BGP6&OSPFV3
34. bgp6Isis6(34) -BGP6&ISIS6
35. bgp6Pim6(35) -BGP6&PIM6
36. ospfv3Isis6(36) -OSPFV3&ISIS6
37. ospfv3Pim6(37) -OSPFV3&PIM6
38. isis6Pim6(38) -ISIS6&PIM6
39. bgp6Ospfv3Isis6(39) -BGP6&OSPFV3&ISIS6
40. bgp6Ospfv3Pim6(40) -BGP6&OSPFV3&PIM6
41. bgp6Isis6Pim6(41) -BGP6&ISIS6&PIM6
42. ospfv3Isis6Pim6(42) -OSPFV3&ISIS6&PIM6
43. bgp6Ospfv3Isis6Pim6(43) -BGP6&OSPFV3&ISIS6&PIM6
44. auto(44) -AUTO
45. autoIsis(45) -AUTO&ISIS
46. autoOspf(46) -AUTO&OSPF
47. autoBgp(47) -AUTO&BGP
48. autoPim(48) -AUTO&PIM
49. autoIsisOspf(49) -AUTO&ISIS&OSPF
50. autoIsisBgp(50) -AUTO&ISIS&BGP
51. autoIsisPim(51) -AUTO&ISIS&PIM
52. autoOspfBgp(52) -AUTO&OSPF&BGP
53. autoOspfPim(53) -AUTO&OSPF&PIM
54. autoBgpPim(54) -AUTO&BGP&PIM
55. autoIsisOspfBgp(55) -AUTO&ISIS&OSPF&BGP
56. autoIsisOspfBgpPim(56) -AUTO&ISIS&OSPF&BGP&PIM
57. autoIsis6(57) -AUTO&ISIS6
58. autoOspfv3(58) -AUTO&OSPFV3
59. autoBgp6(59) -AUTO&BGP6
60. autoPim6(60) -AUTO&PIM6
61. autoIsis6Ospfv3(61) -AUTO&ISIS6&OSPFV3
62. autoIsis6Bgp6(62) -AUTO&ISIS6&BGP6
63. autoIsis6Pim6(63) -AUTO&ISIS6&PIM6
64. autoOspfv3Bgp6(64) -AUTO&OSPFV3&BGP6)
65. autoOspfv3Pim6(65) -AUTO&OSPFV3&PIM6)
66. autoBgp6Pim6(66) -AUTO&BGP6&PIM6
67. autoIsis6Ospfv3Bgp6(67) -AUTO&ISIS6&OSPFV3&BGP6
68. autoIsis6Ospfv3Bgp6Pim6(68) -AUTO&ISIS6&OSPFV3&BGP6&PIM6
69. etrunk(69) -ETRUNK
70. etrunkIfnet(70) -ETRUNK&IFNET
71. etrunkVrrp(71) -ETRUNK&VRRP
72. etrunkVrrpIfnet(72) -ETRUNK&VRRP&IFNET
73. etrunkOamLspmL2vpn(73) -ETRUNK&OAM&LSPM&L2VPN
74. etrunkOamTnlL2vpn(74) -ETRUNK&OAM&TNL&L2VPN
75. etrunkLspmL2vpnTnlps(75) -ETRUNK&LSPM&L2VPN&TNLPS
76. etrunkOamMplsfwL2vpn(76) -ETRUNK&OAM&MPLSFW&L2VPN
77. etrunkvsiPw(77) -ETRUNK&VSIPW
78. etrunkOamLspmL2vpnVrrp(78) -ETRUNK&OAM&LSPM&L2VPN&VRRP
79. etrunkOamTnlL2vpnVrrp(79) -ETRUNK&OAM&TNL&L2VPN&VRRP
80. etrunkLspmL2vpnTnlpsVrrp(80) -ETRUNK&LSMP&L2VPN&TNLPS&VRRP
81. etrunkOamMplsfwL2vpnVrrp(81) -ETRUNK&OAM&MPLSFW&L2VPN&VRRP
82. rip(82) -RIP
83. bgpRip(83) -BGP&RIP
84. ospfRip(84) -OSPF&RIP
85. isisRip(85) -ISIS&RIP
86. pimRip(86) -PIM&RIP
87. bgpOspfRip(87) -BGP&OSPF&RIP
88. bgpIsisRip(88) -BGP&ISIS&RIP
89. bgpPimRip(89) -BGP&PIM&RIP
90. ospfIsisRip(90) -OSPF&ISIS&RIP
91. ospfPimRip(91) -OSPF&PIM&RIP
92. isisPimRip(92) -ISIS&PIM&RIP
93. bgpOspfIsisRip(93) -BGP&OSPF&ISIS&RIP
94. bgpOspfPimRip(94) -BGP&OSPF&PIM&RIP
95. ospfIsisPimRip(95) -OSPF&ISIS&PIM&RIP
96. autoRip(96) -AUTO&RIP
97. autoBgpRip(97) -AUTO&BGP&RIP
98. autoOspfRip(98) -AUTO&OSPF&RIP
99. autoIsisRip(99) -AUTO&ISIS&RIP
100. autoPimRip(100) -AUTO&PIM&RIP
101. autoBgpOspfRip(101) -AUTO&BGP&OSPF&RIP
102. autoBgpIsisRip(102) -AUTO&BGP&ISIS&RIP
103. autoBgpPimRip(103) -AUTO&BGP&PIM&RIP
104. autoOspfIsisRip(104) -AUTO&OSPF&ISIS&RIP
105. autoOspfPimRip(105) -AUTO&OSPF&PIM&RIP
106. autoIsisPimRip(106) -AUTO&ISIS&PIM&RIP
107. autoBgpOspfIsisRip(107) -AUTO&BGP&OSPF&ISIS&RIP
108. autoBgpOspfPimRip(108) -AUTO&BGP&OSPF&PIM&RIP
109. autoOspfIsisPimRip(109) -AUTO&OSPF&ISIS&PIM&RIP
110. autoIsisOspfBgpPimVrrp(110) -AUTO&ISIS&OSPF&BGP&PIM&VRRP
111. autoIsisOspfPimVrrp(111) -AUTO&ISIS&OSPF&PIM&VRRP
112. autoIsisOspfBgpVrrp(112) -AUTO&ISIS&OSPF&BGP&VRRP
113. autoIsisBgpPimVrrp(113) -AUTO&ISIS&BGP&PIM&VRRP
114. autoOspfBgpPimVrrp(114) -AUTO&OSPF&BGP&PIM&VRRP
115. autoIsisOspfVrrp(115) -AUTO&ISIS&OSPF&VRRP
116. autoIsisBgpVrrp(116) -AUTO&ISIS&BGP&VRRP
117. autoOspfBgpVrrp(117) -AUTO&OSPF&BGP&VRRP
118. autoIsisPimVrrp(118) -AUTO&ISIS&PIM&VRRP
119. autoOspfPimVrrp(119) -AUTO&OSPF&PIM&VRRP
120. autoBgpPimVrrp(120) -AUTO&BGP&PIM&VRRP
121. autoIsisVrrp(121) -AUTO&ISIS&VRRP
122. autoOspfVrrp(122) -AUTO&OSPF&VRRP
123. autoBgpVrrp(123) -AUTO&BGP&VRRP
124. autoPimVrrp(124) -AUTO&PIM&VRRP
125. autoVrrp(125) -AUTO&VRRP
126. autoVrrpBgp6(126) -AUTO&VRRP&BGP6
127. autoOspfv3Isis6Pim6(127) -AUTO&OSPFV3&ISIS6&PIM6
128. autoOspfBgpPim(128) -AUTO&OSPF&BGP&PIM
129. autoIsisOspfPim(129) -AUTO&ISIS&OSPF&PIM
130. autoIsisPimBgp(130) -AUTO&ISIS&BGP&PIM
131. bgpOspfIsisPimRip(131) -BGP&OSPF&ISIS&PIM&RIP
132. autoBgpOspfIsisPimRip(132) -AUTO&BGP&OSPF&ISIS&PIM&RIP
133. bgpRsvp(133) -BGP&RSVP
134. ospfRsvp(134) -OSPF&RSVP
135. isisRsvp(135) -ISIS&RSVP
136. pimRsvp(136) -PIM&RSVP
137. ripRsvp(137) -RIP&RSVP
138. bgpOspfRsvp(138) -BGP&OSPF&RSVP
139. bgpIsisRsvp(139) -BGP&ISIS&RSVP
140. bgpPimRsvp(140) -BGP&PIM&RSVP
141. bgpRipRsvp(141) -BGP&RIP&RSVP
142. ospfIsisRsvp(142) -OSPF&ISIS&RSVP
143. ospfPimRsvp(143) -OSPF&PIM&RSVP
144. ospfRipRsvp(144) -OSPF&RIP&RSVP
145. isisPimRsvp(145) -ISIS&PIM&RSVP
146. isisRipRsvp(146) -ISIS&RIP&RSVP
147. pimRipRsvp(147) -PIM&RIP&RSVP
148. bgpOspfIsisRsvp(148) -BGP&OSPF&ISIS&RSVP
149. bgpOspfPimRsvp(149) -BGP&OSPF&PIM&RSVP
150. bgpOspfRipRsvp(150) -BGP&OSPF&RIP&RSVP
151. bgpIsisPimRsvp(151) -BGP&ISIS&PIM&RSVP
152. bgpIsisRipRsvp(152) -BGP&ISIS&RIP&RSVP
153. bgpPimRipRsvp(153) -BGP&PIM&RIP&RSVP
154. ospfIsisPimRsvp(154) -OSPF&ISIS&PIM&RSVP
155. ospfIsisRipRsvp(155) -OSPF&ISIS&RIP&RSVP
156. isisPimRipRsvp(156) -ISIS&PIM&RIP&RSVP
157. bgpOspfIsisPimRsvp(157) -BGP&OSPF&ISIS&PIM&RSVP
158. bgpOspfIsisRipRSvp(158) -BGP&OSPF&ISIS&RIP&RSVP
159. bgpOspfPimRipRsvp(159) -BGP&OSPF&PIM&RIP&RSVP
160. bgpIsisPimRipRsvp(160) -BGP&ISIS&PIM&RIP&RSVP
161. ospfIsisPimRipRsvp(161) -OSPF&ISIS&PIM&RIP&RSVP
162. bgpOspfIsisPimRipRsvp(162) -BGP&OSPF&ISIS&PIM&RIP&RSVP
163. autoRsvp(163) -AUTO&RSVP
164. autoBgpRsvp(164) -AUTO&BGP&RSVP
165. autoOspfRsvp(165) -AUTO&OSPF&RSVP
166. autoIsisRsvp(166) -AUTO&ISIS&RSVP
167. autoPimRsvp(167) -AUTO&PIM&RSVP
168. autoRipRsvp(168) -AUTO&RIP&RSVP
169. autoBgpOspfRsvp(169) -AUTO&BGP&OSPF&RSVP
170. autoBgpIsisRsvp(170) -AUTO&BGP&ISIS&RSVP
171. autoBgpPimRsvp(171) -AUTO&BGP&PIM&RSVP
172. autoBgpRipRsvp(172) -AUTO&BGP&RIP&RSVP
173. autoOspfIsisRsvp(173) -AUTO&OSPF&ISIS&RSVP
174. autoOspfPimRsvp(174) -AUTO&OSPF&PIM&RSVP
175. autoOspfRipRsvp(175) -AUTO&OSPF&RIP&RSVP
176. autoIsisPimRsvp(176) -AUTO&ISIS&PIM&RSVP
177. autoIsisRipRsvp(177) -AUTO&ISIS&RIP&RSVP
178. autoPimRipRsvp(178) -AUTO&PIM&RIP&RAVP
179. autoBgpOspfIsisRsvp(179) -AUTO&BGP&OSPF&ISIS&RSVP
180. autoBgpOspfPimRsvp(180) -AUTO&BGP&OSPF&PIM&RSVP
181. autoBgpOspfRipRsvp(181) -AUTO&BGP&OSPF&RIP&RSVP
182. autoOspfIsisPimRsvp(182) -AUTO&OSPF&ISIS&PIM&RSVP
183. autoOspfIsisRipRsvp(183) -AUTO&OSPF&ISIS&RIP&RSVP
184. autoIsisPimRipRsvp(184) -AUTO&ISIS&PIM&RIP&RSVP
185. autoBgpOspfIsisPimRsvp(185) -AUTO&BGP&OSPF&ISIS&PIM&RSVP
186. autoBgpOspfIsisRipRsvp(186) -AUTO&BGP&OSPF&ISIS&RIP&RSVP
187. autoOspfIsisPimRipRsvp(187) -AUTO&OSPF&ISIS&PIM&RIP&RSVP
188. rsvp(188) -RSVP
"
::= { hwBfdSessionEntry 23 }
hwBfdSessDefaultIp OBJECT-TYPE
SYNTAX INTEGER
{
no(1),
yes(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BFD session use default multicast IP as the detect peer-ip
Options:
1. no(1) -do not use the default multicast IP
2. yes(2) -use the default multicast IP
"
::= { hwBfdSessionEntry 24 }
hwBfdSessPISFlag OBJECT-TYPE
SYNTAX INTEGER
{
false(1),
true(2),
subif(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of BFD session is associated with the state of the binding interface
Options:
1. false(1) -do not associate with interface state
2. true(2) -ssociate with interface state
3. subif(3) -associate with interface and correlative sub interface
"
::= { hwBfdSessionEntry 25 }
hwBfdSessBindType OBJECT-TYPE
SYNTAX INTEGER
{
interfaceIp(1),
peerIp(2),
sourceIp(3),
ifAndSourceIp(4),
fec(5),
tunnelIf(6),
ospf(7),
isis(8),
ldpLsp(9),
staticLsp(10),
teLsp(11),
teTunnel(12),
pw(13),
vsiPw(15)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The binding type of the BFD session.
Options:
1. interfaceIp(1) -BFD for IP with peer-ip and interface
2. peerIp(2) -BFD for IP only with peer-ip
3. sourceIp(3) -BFD for IP with peer-ip and source-ip
4. ifAndSourceIp(4) -BFD for IP with peer-ip, interface and source-ip
5. fec(5) -BFD for FEC(NOT support now)
6. tunnelIf(6) -BFD for Tunnel interface(NOT support now)
7. ospf(7) -BFD for OSPF
8. isis(8) -BFD for ISIS
9. ldpLsp(9) -BFD for LDP-LSP
10. staticLsp(10) -BFD for static LSP
11. teLsp(11) -BFD for TE-LSP
12. teTunnel(12) -BFD for TE-Tunnel
13. pw(13) -BFD for PW;
14. vsiPw(15) -BFD for VSI PW
"
::= { hwBfdSessionEntry 26 }
hwBfdSessNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is the next hop of the BFD session."
::= { hwBfdSessionEntry 27 }
hwBfdSessStaticLspName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is the static LSP name of the BFD session."
::= { hwBfdSessionEntry 28 }
hwBfdSessLspIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is the index of the static LSP or LDP LSP in BFD session, mapping the channel index in MPLS network."
::= { hwBfdSessionEntry 29 }
hwBfdSessPWSecondaryFlag OBJECT-TYPE
SYNTAX INTEGER
{
flagMasterPW(1),
flagSecondaryPW(2),
flagNoPW(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The role of the PW bound with BFD session.
Options:
1. flagMasterPW(1) -master PW
2. flagSecondaryPW(2) -secondary PW
3. flagNoPW(3) -no PW
Default: 1
"
::= { hwBfdSessionEntry 30 }
hwBfdSessTunnelDetectType OBJECT-TYPE
SYNTAX INTEGER
{
flagBothDown(1),
flagNeighborDown(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set the failure notifies policy type.
Options:
1. flagBothDown(1) -notify applications when detecting both Detect-Down and Neighbor-Down
2. flagNeighborDown(2) -notify applications only when detecting Neighbor-Down
Default: 1
"
::= { hwBfdSessionEntry 31 }
hwBfdSessVcId OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is the ID of VC."
::= { hwBfdSessionEntry 32 }
hwBfdSessVsiName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is the name of VSI."
::= { hwBfdSessionEntry 33 }
hwBfdSessVsiPeerAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is the peer-ip of VSI."
::= { hwBfdSessionEntry 34 }
hwBfdSessDiscrAuto OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describe whether the discriminator can be auto allocated.
Options:
1. enabled(1) -the discriminator can be allocated automatically
2. disabled(2) -the discriminator can not be allocated automatically
Default: disabled
"
::= { hwBfdSessionEntry 35 }
hwBfdSessPeerIpv6Addr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Define the peer IPv6 address of the BFD session."
::= { hwBfdSessionEntry 36 }
hwBfdSessSourceIpv6Addr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Define the source IPv6 address of the BFD session."
::= { hwBfdSessionEntry 37 }
hwBfdSessIpv6NextHop OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is the next hop of the BFD session."
::= { hwBfdSessionEntry 38 }
hwBfdSessIsIPv6Addr OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the peer address of the BFD session is IPv6 address.
Default: false
"
::= { hwBfdSessionEntry 39 }
hwBfdSessMeticulous OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether enable meticulous authentication for MD5 or SHA-1 type.
Options:
1. enabled(1) -enable meticulous authentication for MD5 or SHA-1 type
2. disabled(2) -disabled meticulous authentication for MD5 or SHA-1 type
Default: 2
"
::= { hwBfdSessionEntry 40 }
hwBfdSessLooseAuthentication OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether loose authentication check.
Options:
1. True(1) -loose-check
2. False(2) -do not loose-check
Default: false
"
::= { hwBfdSessionEntry 41 }
hwBfdSessAuthenticationStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication status of the bfd session
Options:
1. 0 -authentication disable
2. 1 -interface board do not support bfd authentication
3. 2 -keychain does not exist
4. 3 -auth BFD session number exceed
5. 4 -authentication in operation normally
100. 100 -exception
Default: 0
"
::= { hwBfdSessionEntry 42 }
hwBfdSessOneArmEcho OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies whether a session works in one-arm-echo mode.
Options:
1. enabled(1) -indicates that the session works in one-arm-echo mode
2. disabled(2) -indicates that the session does not work in one-arm-echo mode
Default: disabled
"
::= { hwBfdSessionEntry 43 }
hwBfdSessPWTtlMode OBJECT-TYPE
SYNTAX INTEGER
{
config(1),
auto(2),
default(3),
nottl(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the configuration mode of a TTL used by
the BFD session for PW.
Options:
1. config(1) -indicates that the TTL is manually set
2. auto(2) -indicates that the TTL is automatically calculated based on an IP address
3. default(3) -indicates that the TTL is 255 by default
4. nottl(4) -indicates that the TTL is not in PW mode
"
::= { hwBfdSessionEntry 44 }
hwBfdSessPWTtl OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the TTL used by the BFD session for PW."
::= { hwBfdSessionEntry 45 }
hwBfdSessRemotePeerIpType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the type of the destination address of the BFD
session for PW.
"
::= { hwBfdSessionEntry 46 }
hwBfdSessRemotePeerIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the destination IP address of the BFD session
for PW.
"
::= { hwBfdSessionEntry 47 }
hwBfdSessSelectBoard OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..47))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the main processing board of a BFD session."
::= { hwBfdSessionEntry 48 }
hwBfdSessPWSPE OBJECT-TYPE
SYNTAX INTEGER
{
upe(1),
spe(2),
none(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the node on which a BFD session is set up.
The values are as follows.
Options:
1. upe(1) -indicates that a BFD session is set up on a UPE to detect a PW
2. spe(2) -indicates that a BFD session is set up on an SPE to detect a PW
3. none(3) -indicates that a BFD session does not detect a PW
Default: none
"
::= { hwBfdSessionEntry 49 }
hwBfdSessPWTrackIfName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the interface monitored by the BFD session for PW."
::= { hwBfdSessionEntry 50 }
hwBfdSessIsPWTrackIf OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies whether the BFD session for
PW monitors an interface. The values are as follows.
Options:
1. enabled(1) -enables the BFD session for PW to monitor the interface
2. disabled(2) -disables the BFD session for PW from monitoring the interface
"
::= { hwBfdSessionEntry 51 }
hwBfdSessEncapsulationType OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the VC encapsulation type on an SPE.
The values are as follows:
fr
atm-aal5-sdu
atm-trans-cell
vlan
ethernet
hdlc
ppp
atm-nto1-vcc
atm-nto1-vpc
ip-layer2
atm-1to1-vcc
atm-1to1-vpc
atm-aal5-pdu
satop-e1
satop-t1
esopsn-basic
ip-interworking
"
::= { hwBfdSessionEntry 52 }
hwBfdSessPEVid OBJECT-TYPE
SYNTAX Unsigned32 (0..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the outer tag of a sub-interface
for QinQ VLAN tag termination or the VLAN ID of a sub-interface for
dot1q VLAN tag termination.
"
::= { hwBfdSessionEntry 53 }
hwBfdSessCEVid OBJECT-TYPE
SYNTAX Unsigned32 (0..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the inner tag in QinQ packets."
::= { hwBfdSessionEntry 54 }
hwBfdSessPeerInetAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the type of the destination address of the BFD
session.
"
::= { hwBfdSessionEntry 55 }
hwBfdSessPeerInetAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the destination IP address of the BFD session."
::= { hwBfdSessionEntry 56 }
hwBfdSessInetNextHopType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the type of the next hop of the BFD
session.
"
::= { hwBfdSessionEntry 57 }
hwBfdSessInetNextHop OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the next hop of the BFD session."
::= { hwBfdSessionEntry 58 }
hwBfdSessBindAppTypeMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value which indicates the set of applications that
this BFD session binds. Every bit indicates a application.
The corresponding bit and applications are as follows:
bit application
0 IFNET
1 Route-Management
2 OSPF
3 ISISL1
4 ISISL2
5 PIM
6 ISISL1L2
7 BGP
8 VRRP
9 LSPM
10 RSVP
11 LDP
12 TE
13 Product Private APP
14 L2VPN
15 OAM_MANAGER
16 TUNNEL_PS
17 TUNNEL
18 MPLSFW
19 VGMP
20 LSPV
21 VSI_PW
22 ETHOAM
23 AUTO
24 E-TRUNK
25 OSPFv3
26 ISISL1_6
27 ISISL2_6
28 PIM6
29 ISISL1L2_6
30 BGP6
31 RM6
32 RBS
33 RIP
"
::= { hwBfdSessionEntry 59 }
hwBfdSessionPerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBfdSessionPerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies BFD Session performance counters.
The index of this table is hwBfdSessPerIndex.
"
::= { hwBfdObjects 4 }
hwBfdSessionPerEntry OBJECT-TYPE
SYNTAX HwBfdSessionPerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies BFD Session performance counters.
The index of this entry is hwBfdSessPerIndex.
"
INDEX { hwBfdSessPerIndex }
::= { hwBfdSessionPerTable 1 }
HwBfdSessionPerEntry ::=
SEQUENCE {
hwBfdSessPerIndex
Unsigned32,
hwBfdSessPerfPktIn
Counter32,
hwBfdSessPerfPktInHC
Counter32,
hwBfdSessPerfPktOut
Counter32,
hwBfdSessPerfPktOutHC
Counter32,
hwBfdSessPerfBadIn
Counter32,
hwBfdSessPerfBadInHC
Counter32,
hwBfdSessPerfBadOut
Counter32,
hwBfdSessPerfBadOutHC
Counter32,
hwBfdSessPerfLastSessDownTime
OCTET STRING,
hwBfdSessPerfSessDownCount
Unsigned32,
hwBfdSessPerfSessShortBreakCount
Unsigned32,
hwBfdSessionPerStartTime
OCTET STRING
}
hwBfdSessPerIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of BFD session statistics.
This index is automatically allocated inside the system
and is not user-configurable.
"
::= { hwBfdSessionPerEntry 1 }
hwBfdSessPerfPktIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistical information of the received Octets in local
system in this session.The total received packet number.
"
::= { hwBfdSessionPerEntry 2 }
hwBfdSessPerfPktInHC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistical information of the received Octets in local
system in this session.The high 4 bytes of total received
packet number.
"
::= { hwBfdSessionPerEntry 3 }
hwBfdSessPerfPktOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistical information of the send Packets in local
system in this session.
"
::= { hwBfdSessionPerEntry 4 }
hwBfdSessPerfPktOutHC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistical information of the send Packets in local
system in this session.The high 4 bytes of total send
packet number.
"
::= { hwBfdSessionPerEntry 5 }
hwBfdSessPerfBadIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistical information of the received Errors in local
system in this session.
"
::= { hwBfdSessionPerEntry 6 }
hwBfdSessPerfBadInHC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistical information of the received Errors in local
system in this session.The high 4 bytes of total received wrong
packet number.
"
::= { hwBfdSessionPerEntry 7 }
hwBfdSessPerfBadOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistical information of the send Errors in local
system in this session.
"
::= { hwBfdSessionPerEntry 8 }
hwBfdSessPerfBadOutHC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistical information of the send Errors in local
system in this session.The high 4 bytes of total send
wrong packet number.
"
::= { hwBfdSessionPerEntry 9 }
hwBfdSessPerfLastSessDownTime OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time of session last time down."
::= { hwBfdSessionPerEntry 10 }
hwBfdSessPerfSessDownCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of session down."
::= { hwBfdSessionPerEntry 11 }
hwBfdSessPerfSessShortBreakCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of session shortbreak."
::= { hwBfdSessionPerEntry 12 }
hwBfdSessionPerStartTime OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time that session start detection."
::= { hwBfdSessionPerEntry 13 }
hwBfdSlotTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBfdSlotEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot table of BFD.
BFD statistics on specify board of containing the following objects.
The index of this table is hwBfdSlotID.
"
::= { hwBfdObjects 5 }
hwBfdSlotEntry OBJECT-TYPE
SYNTAX HwBfdSlotEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot table of BFD.
BFD statistics on specify board of containing the following objects.
The index of this entry is hwBfdSlotID.
"
INDEX { hwBfdSlotID }
::= { hwBfdSlotTable 1 }
HwBfdSlotEntry ::=
SEQUENCE {
hwBfdSlotID
Unsigned32,
hwBfdSlotReserveOneHopSessNum
Unsigned32,
hwBfdSlotOneHopSessNum
Unsigned32,
hwBfdSlotCurrentSessNum
Unsigned32,
hwBfdSlotRowStatus
RowStatus
}
hwBfdSlotID OBJECT-TYPE
SYNTAX Unsigned32 (0..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ID of slot."
::= { hwBfdSlotEntry 1 }
hwBfdSlotReserveOneHopSessNum OBJECT-TYPE
SYNTAX Unsigned32 (0..512)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of session reserving for one-hop session on the board."
::= { hwBfdSlotEntry 2 }
hwBfdSlotOneHopSessNum OBJECT-TYPE
SYNTAX Unsigned32 (0..512)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of session for one-hop session on the board."
::= { hwBfdSlotEntry 3 }
hwBfdSlotCurrentSessNum OBJECT-TYPE
SYNTAX Unsigned32 (0..512)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of session on the board on current."
::= { hwBfdSlotEntry 4 }
hwBfdSlotRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to manage the creation and deletion of conceptual rows."
::= { hwBfdSlotEntry 5 }
hwBfdTtlConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBfdTtlConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The TTL configuration table.
The index of this table is hwBfdTtlConfAddr, hwBfdTtlConfMaskLen and hwBfdTtlConfType."
::= { hwBfdObjects 6 }
hwBfdTtlConfEntry OBJECT-TYPE
SYNTAX HwBfdTtlConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The TTL configuration table.
The index of this entry is hwBfdTtlConfAddr, hwBfdTtlConfMaskLen and hwBfdTtlConfType."
INDEX { hwBfdTtlConfAddr, hwBfdTtlConfMaskLen,hwBfdTtlConfType}
::= { hwBfdTtlConfTable 1 }
HwBfdTtlConfEntry ::=
SEQUENCE {
hwBfdTtlConfAddr
IpAddress,
hwBfdTtlConfMaskLen
Integer32,
hwBfdTtlConfType
INTEGER,
hwBfdTtlConfValue
Integer32,
hwBfdTtlConfRowStatus
RowStatus
}
hwBfdTtlConfAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP address."
::= { hwBfdTtlConfEntry 1 }
hwBfdTtlConfMaskLen OBJECT-TYPE
SYNTAX Integer32 (8..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Length of IP address mask."
::= { hwBfdTtlConfEntry 2 }
hwBfdTtlConfType OBJECT-TYPE
SYNTAX INTEGER
{
singleHop(1),
multiHop(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Type of BFD session.
Options:
1. singleHop(1) -single hop bfd session
2. multiHop(2) -multi hop bfd session
"
::= { hwBfdTtlConfEntry 3 }
hwBfdTtlConfValue OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"TTL value."
::= { hwBfdTtlConfEntry 4 }
hwBfdTtlConfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this table entry."
::= { hwBfdTtlConfEntry 50 }
hwBfdPassiveAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBfdPassiveAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The authentication configuration table for entire dynamic bfd session on egress.
The index of this table is hwBfdPassiveAuthPeerAddr and hwBfdPassiveAuthProtocol.
"
::= { hwBfdObjects 7 }
hwBfdPassiveAuthEntry OBJECT-TYPE
SYNTAX HwBfdPassiveAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The authentication configuration table for entire dynamic bfd session on egress.
The index of this entry is hwBfdPassiveAuthPeerAddr and hwBfdPassiveAuthProtocol.
"
INDEX { hwBfdPassiveAuthPeerAddr, hwBfdPassiveAuthProtocol}
::= { hwBfdPassiveAuthTable 1 }
HwBfdPassiveAuthEntry ::=
SEQUENCE {
hwBfdPassiveAuthPeerAddr
IpAddress,
hwBfdPassiveAuthProtocol
Integer32,
hwBfdPassiveAuthKeychainName
OCTET STRING,
hwBfdPassiveAuthMeticulous
EnabledStatus,
hwBfdPassiveAuthLoose
TruthValue,
hwBfdPassiveAuthRowStatus
RowStatus
}
hwBfdPassiveAuthPeerAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify the Lsr-id IP address of the ingress."
::= { hwBfdPassiveAuthEntry 1 }
hwBfdPassiveAuthProtocol OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify the protocol on ingress.
Options:
1. te(1) -MPLS TE protocol
2. ldp(2) -MPLS LDP protocol
"
::= { hwBfdPassiveAuthEntry 2 }
hwBfdPassiveAuthKeychainName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..47))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify the name of the keychain for authentication of entire dynamic bfd session."
::= { hwBfdPassiveAuthEntry 3 }
hwBfdPassiveAuthMeticulous OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether enable meticulous authentication for MD5 or SHA-1 type.
Options:
1. enabled(1) -enable meticulous authentication for MD5 or SHA-1 type
2. disabled(2) -disabled meticulous authentication for MD5 or SHA-1 type
Default: 2
"
::= { hwBfdPassiveAuthEntry 4 }
hwBfdPassiveAuthLoose OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether loose authentication check.
Options:
1. True(1) -loose-check
2. False(2) -do not loose-check
Default: false
"
::= { hwBfdPassiveAuthEntry 5 }
hwBfdPassiveAuthRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this table entry."
::= { hwBfdPassiveAuthEntry 50 }
hwBfdNotifications OBJECT IDENTIFIER ::= { hwBFDMIB 3 }
hwBfdSessDown NOTIFICATION-TYPE
OBJECTS { hwBfdSessCfgName, hwBfdSessPeerAddr, hwBfdSessBindIfIndex, hwBfdSessBindIfName, hwBfdSessDiag,
hwBfdSessVrfIndex, hwBfdSessVPNName, hwBfdSessType, hwBfdSessDefaultIp, hwBfdSessBindType,
hwBfdSessStaticLspName, hwBfdSessPWSecondaryFlag, hwBfdSessNextHop, hwBfdSessVcId, hwBfdSessVsiName,
hwBfdSessVsiPeerAddr, hwBfdSessDiscrAuto, hwBfdSessPeerIpv6Addr, hwBfdSessIpv6NextHop }
STATUS current
DESCRIPTION
"This trap occurred when the state of the BFD session
became down. The BFD session is characterized
by the objects in this node.
"
::= { hwBfdNotifications 1 }
hwBfdSessUp NOTIFICATION-TYPE
OBJECTS { hwBfdSessCfgName, hwBfdSessPeerAddr, hwBfdSessBindIfIndex, hwBfdSessBindIfName, hwBfdSessDiag,
hwBfdSessVrfIndex, hwBfdSessVPNName, hwBfdSessType, hwBfdSessDefaultIp, hwBfdSessBindType,
hwBfdSessStaticLspName, hwBfdSessPWSecondaryFlag, hwBfdSessNextHop, hwBfdSessVcId, hwBfdSessVsiName,
hwBfdSessVsiPeerAddr, hwBfdSessDiscrAuto, hwBfdSessPeerIpv6Addr, hwBfdSessIpv6NextHop }
STATUS current
DESCRIPTION
"This trap occurred when the state of the BFD session
became up. The BFD session is characterized
by the objects in this node.
"
::= { hwBfdNotifications 2 }
hwBfdSessReachLimit NOTIFICATION-TYPE
OBJECTS { hwBfdSessLimitNumber }
STATUS current
DESCRIPTION
"There is the notify when the session number reach the global limit."
::= { hwBfdNotifications 3 }
hwBfdSessReachLimitBindIf NOTIFICATION-TYPE
OBJECTS { hwBfdSessConfBindIfName, hwBfdSessInterfaceLimitNumber }
STATUS current
DESCRIPTION
"There is the notify when the session number reach the interface limit."
::= { hwBfdNotifications 4 }
hwBfdConformance OBJECT IDENTIFIER ::= { hwBFDMIB 4 }
hwBfdCompliances OBJECT IDENTIFIER ::= { hwBfdConformance 1 }
-- this module
hwBfdFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which
implement the Huawei BFD MIB.
"
MODULE -- this module
MANDATORY-GROUPS { hwBfdGroup, hwBfdSessGroup, hwBfdObsoleteGroup, hwBfdNotificationGroup }
::= { hwBfdCompliances 1 }
hwBfdGroups OBJECT IDENTIFIER ::= { hwBfdConformance 2 }
hwBfdGroup OBJECT-GROUP
OBJECTS { hwBfdVersionNumber, hwBfdAdminStatus, hwBfdSessLimitNumber, hwBfdSessInterfaceLimitNumber, hwBfdSessStaticNumber,
hwBfdSessDynamicNumber, hwBfdSessGlobalDefaultIpAddr, hwBfdEchoPassiveStatus, hwBfdEchoAclNum, hwBfdSessDynamicPingInterval,
hwBfdSessDynamicSupportPassive, hwBfdSessDelayUpTime, hwBfdSessMultiDstPort, hwBfdTrapSendInterval, hwBfdIfConfName, hwBfdIfConfDeleting, hwBfdIfConfAvailable, hwBfdIfConfSessCnt,
hwBfdIfConfRowStatus, hwBfdSlotReserveOneHopSessNum,hwBfdSlotCurrentSessNum, hwBfdSlotRowStatus, hwBfdLimitDeviceName, hwBfdDynamicSessionTos
}
STATUS current
DESCRIPTION
"A collection of objects providing BFD global information."
::= { hwBfdGroups 1 }
hwBfdSessGroup OBJECT-GROUP
OBJECTS { hwBfdSessConfMIndex, hwBfdSessConfLocalDiscr, hwBfdSessConfRemoteDiscr, hwBfdSessConfPeerAddr, hwBfdSessConfBindIfIndex,
hwBfdSessConfBindIfName, hwBfdSessConfDemandEnable, hwBfdSessConfDemandTimerInterval, hwBfdSessConfDetectMult, hwBfdSessConfDesiredMinRxInterval,
hwBfdSessConfDesiredMinTxInterval, hwBfdSessConfWTRInterval, hwBfdSessConfTOS, hwBfdSessConfPSTFlag, hwBfdSessConfCommitFlag,
hwBfdSessConfAdminStatus, hwBfdSessConfRowStatus, hwBfdSessConfSourceAddr, hwBfdSessConfVrfIndex, hwBfdSessConfVPNName,
hwBfdSessConfDefaultIp, hwBfdSessConfPISFlag, hwBfdSessConfBindType, hwBfdSessConfNextHop, hwBfdSessConfStaticLspName,
hwBfdSessConfPWSecondaryFlag, hwBfdSessConfTunnelDetectType, hwBfdSessConfVcId, hwBfdSessConfVsiName, hwBfdSessConfVsiPeerAddr, hwBfdSessConfDiscrAuto, hwBfdSessConfPeerIpv6Addr, hwBfdSessConfSourceIpv6Addr, hwBfdSessConfIpv6NextHop, hwBfdSessConfIsIpv6Addr,
hwBfdSessConfKeychainName, hwBfdSessConfMeticulous, hwBfdSessConfLooseAuthentication, hwBfdSessConfPWTtlMode,
hwBfdSessConfPWTtl, hwBfdSessConfRemotePeerIp, hwBfdSessConfRemotePeerIpType, hwBfdSessConfPWSPE, hwBfdSessConfPWTrackIfName, hwBfdSessConfIsPWTrackIf, hwBfdSessConfEncapsulationType,
hwBfdSessConfPEVid, hwBfdSessConfCEVid, hwBfdSessMIndex, hwBfdSessBindVRRP,
hwBfdSessCfgName, hwBfdSessPeerAddr, hwBfdSessBindIfIndex, hwBfdSessBindIfName, hwBfdSessLocalDiscr,
hwBfdSessRemoteDiscr, hwBfdSessOperMode, hwBfdSessDetectMult, hwBfdSessDemandTimerInterval, hwBfdSessActualRxInterval,
hwBfdSessActualTxInterval, hwBfdSessWTRInterval, hwBfdSessTOS, hwBfdSessState, hwBfdSessDiag,
hwBfdSessSourceAddr, hwBfdSessVrfIndex, hwBfdSessVPNName, hwBfdSessType, hwBfdSessBindAppType,
hwBfdSessDefaultIp, hwBfdSessPISFlag, hwBfdSessBindType, hwBfdSessNextHop, hwBfdSessStaticLspName,
hwBfdSessLspIndex, hwBfdSessPWSecondaryFlag, hwBfdSessTunnelDetectType, hwBfdSessVcId, hwBfdSessVsiName, hwBfdSessVsiPeerAddr, hwBfdSessDiscrAuto, hwBfdSessPeerIpv6Addr, hwBfdSessSourceIpv6Addr, hwBfdSessIpv6NextHop, hwBfdSessIsIPv6Addr, hwBfdSessMeticulous,hwBfdSessLooseAuthentication, hwBfdSessAuthenticationStatus,
hwBfdSessPWTtlMode, hwBfdSessPWTtl, hwBfdSessRemotePeerIp, hwBfdSessRemotePeerIpType, hwBfdSessSelectBoard, hwBfdSessPWSPE, hwBfdSessPWTrackIfName,
hwBfdSessIsPWTrackIf, hwBfdSessEncapsulationType, hwBfdSessPEVid, hwBfdSessCEVid, hwBfdSessPeerInetAddrType, hwBfdSessPeerInetAddr, hwBfdSessInetNextHopType, hwBfdSessInetNextHop, hwBfdSessBindAppTypeMask, hwBfdSessPerfPktIn,
hwBfdSessPerfPktInHC, hwBfdSessPerfPktOut, hwBfdSessPerfPktOutHC, hwBfdSessPerfBadIn, hwBfdSessPerfBadInHC,
hwBfdSessPerfBadOut, hwBfdSessPerfBadOutHC, hwBfdSessPerfLastSessDownTime, hwBfdSessPerfSessDownCount, hwBfdSessPerfSessShortBreakCount,
hwBfdSessionPerStartTime, hwBfdTtlConfValue, hwBfdTtlConfRowStatus,
hwBfdPassiveAuthPeerAddr, hwBfdPassiveAuthProtocol, hwBfdPassiveAuthKeychainName, hwBfdPassiveAuthMeticulous, hwBfdPassiveAuthLoose, hwBfdPassiveAuthRowStatus}
STATUS current
DESCRIPTION
"A collection of objects providing BFD session information."
::= { hwBfdGroups 2 }
hwBfdObsoleteGroup OBJECT-GROUP
OBJECTS { hwBfdIfConfEnable ,hwBfdSlotOneHopSessNum}
STATUS obsolete
DESCRIPTION
"A collection of objects which are obsolete."
::= { hwBfdGroups 3 }
hwBfdNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwBfdSessDown, hwBfdSessUp, hwBfdSessReachLimit, hwBfdSessReachLimitBindIf }
STATUS current
DESCRIPTION
"A collection of traps."
::= { hwBfdGroups 4 }
END
--
-- HUAWEI-BFD-MIB.mib
--
View Git Blame Copy Permalink