631 lines
24 KiB
Plaintext
631 lines
24 KiB
Plaintext
HUAWEI-MPLSOAM-PS-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
hwMplsTunnelSignalProto
|
|
FROM HUAWEI-MPLS-EXTEND-MIB
|
|
hwMpls
|
|
FROM HUAWEI-MIB
|
|
InterfaceIndex
|
|
FROM IF-MIB
|
|
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
IpAddress, Integer32, Unsigned32, OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY
|
|
FROM SNMPv2-SMI
|
|
RowStatus, TruthValue
|
|
FROM SNMPv2-TC;
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.5.12.7
|
|
-- April 27, 2005 at 17:24 GMT
|
|
-- 1.3.6.1.4.1.2011.5.12.7
|
|
hwMplsOam MODULE-IDENTITY
|
|
LAST-UPDATED "200504271724Z" -- April 27, 2005 at 17:24 GMT
|
|
ORGANIZATION
|
|
"Huawei Technologies Co., Ltd."
|
|
CONTACT-INFO
|
|
"R&D BeiJing, Huawei Technologies co.,Ltd.
|
|
Huawei Bld.,NO.3 Xinxi Rd.,
|
|
Shang-Di Information Industry Base,
|
|
Hai-Dian District Beijing P.R. China
|
|
Zip:100085
|
|
Http://www.huawei.com
|
|
E-mail:support@huawei.com"
|
|
DESCRIPTION
|
|
"The HUAWEI-MPLSOAM-MIB contains objects to configure OAM module.
|
|
The Operation, Administration and Maintenance (OAM)
|
|
is an effective means for decreasing the cost of network maintenance.
|
|
The MPLS OAM is used to administrate and maintain MPLS. "
|
|
::= { hwMpls 7 }
|
|
|
|
--
|
|
-- Node definitions
|
|
--
|
|
|
|
hwMplsOamPs OBJECT IDENTIFIER ::= { hwMplsOam 1 }
|
|
|
|
|
|
hwMplsPsObjects OBJECT IDENTIFIER ::= { hwMplsOamPs 3 }
|
|
|
|
|
|
hwMplsPsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwMplsPsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies per-protection-group MPLS PS
|
|
capability and associated information.
|
|
"
|
|
::= { hwMplsPsObjects 1 }
|
|
|
|
|
|
hwMplsPsEntry OBJECT-TYPE
|
|
SYNTAX HwMplsPsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by an LSR for every
|
|
protection group capable of supporting mpls ps."
|
|
INDEX { hwMplsPsIndex }
|
|
::= { hwMplsPsTable 1 }
|
|
|
|
|
|
HwMplsPsEntry ::=
|
|
SEQUENCE {
|
|
hwMplsPsIndex
|
|
Unsigned32,
|
|
hwMplsPsType
|
|
Integer32,
|
|
hwMplsPsWorkTunnName
|
|
OCTET STRING,
|
|
hwMplsPsWorkTunnId
|
|
Integer32,
|
|
hwMplsPsProtectTunnName
|
|
OCTET STRING,
|
|
hwMplsPsProtectTunnId
|
|
Integer32,
|
|
hwMplsPsRevertiveMode
|
|
Integer32,
|
|
hwMplsPsWTR
|
|
Integer32,
|
|
hwMplsPsHoldOff
|
|
Integer32,
|
|
hwMplsPsSwitchCondition
|
|
Integer32,
|
|
hwMplsPsWorkTunnelState
|
|
Integer32,
|
|
hwMplsPsProtTunnelState
|
|
Integer32,
|
|
hwMplsPsSwitchResult
|
|
Integer32,
|
|
hwMplsPsCfgType
|
|
Integer32,
|
|
hwMplsPsCfgProtectTunnId
|
|
Integer32,
|
|
hwMplsPsCfgRevertiveMode
|
|
Integer32,
|
|
hwMplsPsCfgWTR
|
|
Integer32,
|
|
hwMplsPsCfgHoldOff
|
|
Integer32,
|
|
hwMplsPsRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
hwMplsPsIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a unique index for an entry in the mplspsEntry.
|
|
|
|
"
|
|
::= { hwMplsPsEntry 1 }
|
|
|
|
|
|
hwMplsPsType OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of protection switch,can be 1:1,1+1,shared mesh,
|
|
packet 1+1,the default choice is 1:1.
|
|
In the 1+1 architecture type, a protection LSP is dedicated to
|
|
each working LSP with the working LSP bridged onto the
|
|
protection LSP at the source of the protection domain.
|
|
The traffic on working and protection LSPs is transmitted
|
|
simultaneously to the sink of the protection domain,
|
|
where a selection between the working and protection LSP is
|
|
made, based on some predetermined criteria, such as defect
|
|
indication.
|
|
In the 1:1 architecture type, a protection LSP is dedicated to
|
|
each working LSP. The working traffic is transmitted either by
|
|
working or protection LSP.
|
|
In the shared mesh architecture type, possible sharing of
|
|
protection capacity between disjoint link, node in the network
|
|
is achieved while guaranteeing recovery from a single failure.
|
|
In the packet 1+1 architecture type, the traffic is transmitted
|
|
simultaneously onto two possibly disjoint routed LSPs to the
|
|
sink of the protection domain. Each pair of duplicate
|
|
transmitted packets is assigned the same identifier (sequence
|
|
number) but distinct from the other pairs of duplicate packets.
|
|
At the sink of the protection domain packet level selection
|
|
mechanism is employed to select one of the two possibly
|
|
received copies of each packet.
|
|
1: 1:1 protection switching,;
|
|
2: 1+1 protection switching;
|
|
3: shared mesh protection swiching;
|
|
4: packet 1+1 protection switching.
|
|
"
|
|
::= { hwMplsPsEntry 2 }
|
|
|
|
|
|
hwMplsPsWorkTunnName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of work-tunnel."
|
|
::= { hwMplsPsEntry 3 }
|
|
|
|
|
|
hwMplsPsWorkTunnId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Work-tunnel id(session-tunnel-id)."
|
|
::= { hwMplsPsEntry 4 }
|
|
|
|
|
|
hwMplsPsProtectTunnName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of protect-tunnel."
|
|
::= { hwMplsPsEntry 5 }
|
|
|
|
|
|
hwMplsPsProtectTunnId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Protect-tunnel id(session-tunnel-id)."
|
|
::= { hwMplsPsEntry 6 }
|
|
|
|
|
|
hwMplsPsRevertiveMode OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Revertive mode is a protection switching mode where revertive
|
|
action (switch back to the working LSP) is taken after the
|
|
working LSP is repaired.And switching does not occur in a
|
|
non-revertive mode.
|
|
1: revertive;
|
|
2: non-revertive;
|
|
"
|
|
::= { hwMplsPsEntry 7 }
|
|
|
|
|
|
hwMplsPsWTR OBJECT-TYPE
|
|
SYNTAX Integer32 (0..60)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Wait to Restore timer is only applicable for the revertive mode
|
|
and applies to a working LSP,It prevents reversion back to
|
|
select the working LSP until the Wait to Restore timer has
|
|
expired.The default value is 12 minutes.step is 30s."
|
|
::= { hwMplsPsEntry 8 }
|
|
|
|
|
|
hwMplsPsHoldOff OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time between declaration of signal degrade or signal fail,
|
|
and the initialization of the protection switching algorithm.
|
|
step is 100ms.maximum is 10s."
|
|
::= { hwMplsPsEntry 9 }
|
|
|
|
|
|
hwMplsPsSwitchCondition OBJECT-TYPE
|
|
SYNTAX Integer32 (1..9)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current switch condition of the protection group.
|
|
1: clear,This command clears all of the externally
|
|
initiated switch commands listed below;
|
|
2: lockout of protection,Fix the selector position on the
|
|
working LSP,Prevents the selector from switching to the
|
|
protection LSP when it is selecting the working LSP.
|
|
Switches the selector from the protection to the working LSP
|
|
when it is selecting the protection LSP;
|
|
3: forced protection,Switches the selector from the working LSP
|
|
to the protection LSP (unless a higher priority switch
|
|
request (i.e., LoP) is in effect);
|
|
4: signal fail,for 1:1,Signal Fail (SF) is declared when the
|
|
source of the protection domain enters the Defect State by
|
|
receiving a BDI packet (from the return LSP or out of band).
|
|
5: manual switch for working-lsp,Switches the selector from the
|
|
working LSP to the protection LSP (unless an equal or higher
|
|
priority switch request (i.e., LoP, FS, SF or MS) is in
|
|
effect);
|
|
6: manual switch for protection-lsp,Switches the selector from
|
|
the protection LSP to the working LSP (unless an equal or
|
|
higher priority switch request (i.e., LoP, FS, SF or MS) is
|
|
in effect).
|
|
7: WTR-timer;
|
|
8: HoldOff-timer;
|
|
9: Others;
|
|
The pripority of the commands are:
|
|
clear > lockout of protection > force switch > manual switch for working
|
|
lsp = manual switch for protection lsp"
|
|
::= { hwMplsPsEntry 10 }
|
|
|
|
|
|
hwMplsPsWorkTunnelState OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of working tunnel state in one protection group,
|
|
whether it is in detection,
|
|
1: it is outof defect
|
|
2: it enters defect
|
|
"
|
|
::= { hwMplsPsEntry 11 }
|
|
|
|
|
|
hwMplsPsProtTunnelState OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of protection tunnel state in one protection group,
|
|
whether it is in detection,
|
|
1: it is outof defect
|
|
2: it enters defect"
|
|
::= { hwMplsPsEntry 12 }
|
|
|
|
|
|
hwMplsPsSwitchResult OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Which tunnel is used to transfer the data stream.
|
|
1: working-tunnel
|
|
2: protection-tunnel"
|
|
::= { hwMplsPsEntry 13 }
|
|
|
|
|
|
hwMplsPsCfgType OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of protection switch which is configured.
|
|
1: 1:1
|
|
2: 1+1
|
|
3: shared mesh
|
|
4: packet 1:1"
|
|
::= { hwMplsPsEntry 14 }
|
|
|
|
|
|
hwMplsPsCfgProtectTunnId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Protect-tunnel id(session-tunnel-id)."
|
|
::= { hwMplsPsEntry 15 }
|
|
|
|
|
|
hwMplsPsCfgRevertiveMode OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Revertive mode is a protection switching mode where revertive
|
|
action (switch back to the working LSP) is taken after the
|
|
working LSP is repaired.And switching does not occur in a
|
|
non-revertive mode.
|
|
1: revertive;
|
|
2: non-revertive;
|
|
|
|
"
|
|
::= { hwMplsPsEntry 16 }
|
|
|
|
|
|
hwMplsPsCfgWTR OBJECT-TYPE
|
|
SYNTAX Integer32 (0..60)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Wait to Restore timer is only applicable for the revertive mode
|
|
and applies to a working LSP,It prevents reversion back to
|
|
select the working LSP until the Wait to Restore timer has
|
|
expired.The default value is 12 minutes.step is 30s."
|
|
::= { hwMplsPsEntry 17 }
|
|
|
|
|
|
hwMplsPsCfgHoldOff OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time between declaration of signal degrade or signal fail,
|
|
and the initialization of the protection switching algorithm.
|
|
step is 100ms.maximum is 10s."
|
|
::= { hwMplsPsEntry 18 }
|
|
|
|
|
|
hwMplsPsRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and
|
|
delete a row in this table.
|
|
1: active
|
|
2: not in service
|
|
3: not ready
|
|
4: create and go
|
|
5: create and wait
|
|
6: destroy"
|
|
::= { hwMplsPsEntry 19 }
|
|
|
|
|
|
hwTunnPsTrapOpen OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"1:enable;
|
|
2:disable;"
|
|
::= { hwMplsPsObjects 2 }
|
|
|
|
|
|
hwMplsVCPsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwMplsVCPsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwMplsPsObjects 3 }
|
|
|
|
hwMplsApsMismatchReason OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
bridge(1),
|
|
channel(2),
|
|
switching(3),
|
|
operation(4),
|
|
traffic(5)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the alarm reason as below:
|
|
1. Bridge type mismatch, one side is 1:1 (Selector Bridge) protection,
|
|
the other side is 1+1 (Permanent Bridge) protection;
|
|
2. Channel type mismatch, one side has APS channel, the other side has no APS channel;
|
|
3. Switching type mismatch, one side is bidirectional switching,
|
|
the other side is unidirectional switching;
|
|
4. Operation type mismatch, one side is revertive operation,
|
|
the other side is non-revertive operation;
|
|
5. Traffic request mismatch, one side selects working connection,
|
|
the other side selects protection connection;
|
|
"
|
|
::= { hwMplsPsObjects 4 }
|
|
|
|
|
|
hwMplsVCPsEntry OBJECT-TYPE
|
|
SYNTAX HwMplsVCPsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"this table for these commands
|
|
1.mpls te protection tunnel XXX
|
|
2. mpls te reverse-lsp { lsp-name XXXX | lsr-id X.X.X.X tunnel-id x }
|
|
3. mpls te reserved-for-binding "
|
|
INDEX { hwMplsVCPsIfIndex }
|
|
::= { hwMplsVCPsTable 1 }
|
|
|
|
|
|
HwMplsVCPsEntry ::=
|
|
SEQUENCE {
|
|
hwMplsVCPsIfIndex
|
|
InterfaceIndex,
|
|
hwMplsVCPsTNLBinding
|
|
TruthValue,
|
|
hwMplsTeReverseLspName
|
|
OCTET STRING,
|
|
hwMplsVcPsRowStatus
|
|
RowStatus,
|
|
hwMplsTeReverseLspLsrId
|
|
IpAddress,
|
|
hwMplsTeReverseLspTunnId
|
|
Integer32
|
|
}
|
|
|
|
hwMplsVCPsIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description.the index of working tunnel interface of Protection group "
|
|
::= { hwMplsVCPsEntry 1 }
|
|
|
|
|
|
hwMplsVCPsTNLBinding OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description.it is used by command ' mpls te reserved-for-binding '"
|
|
::= { hwMplsVCPsEntry 2 }
|
|
|
|
|
|
hwMplsTeReverseLspName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description.it is used for command ' mpls te reverse-lsp lspname'"
|
|
::= { hwMplsVCPsEntry 3 }
|
|
|
|
|
|
hwMplsVcPsRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description.
|
|
1: active;
|
|
2: notInservice;
|
|
3: notReady;
|
|
4: CreateAndGo;
|
|
5: CreateAndWait;
|
|
6: destroy;"
|
|
::= { hwMplsVCPsEntry 4 }
|
|
|
|
|
|
hwMplsTeReverseLspLsrId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description.it is used for command ' mpls te reverse-lsp lsr-id X.X.X.X tunnel-id XX'"
|
|
::= { hwMplsVCPsEntry 5 }
|
|
|
|
|
|
hwMplsTeReverseLspTunnId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description.it is used for command ' mpls te reverse-lsp lsr-id X.X.X.X tunnel-id XX'"
|
|
::= { hwMplsVCPsEntry 6 }
|
|
|
|
|
|
hwMplsPsNotifications OBJECT IDENTIFIER ::= { hwMplsOamPs 4 }
|
|
|
|
|
|
hwMplsPsSwitchPtoW NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsPsWorkTunnName, hwMplsPsWorkTunnId, hwMplsPsProtectTunnName, hwMplsPsProtectTunnId, hwMplsPsSwitchResult
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when switching from
|
|
protection-lsp to working-lsp occured."
|
|
::= { hwMplsPsNotifications 1 }
|
|
|
|
|
|
hwMplsPsSwitchWtoP NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsPsWorkTunnName, hwMplsPsWorkTunnId, hwMplsPsProtectTunnName, hwMplsPsProtectTunnId, hwMplsPsSwitchResult
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when switching from woking-lsp
|
|
to protection-lsp occured.
|
|
"
|
|
::= { hwMplsPsNotifications 2 }
|
|
|
|
hwMplsApsMismatch NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsPsWorkTunnName, hwMplsApsMismatchReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Trap information indicates fully incompatible provisioning and
|
|
working/protection configuration mismatch are detected by APS frame.
|
|
"
|
|
::= { hwMplsPsNotifications 3 }
|
|
|
|
|
|
hwMplsApsMismatchRecovery NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsPsWorkTunnName, hwMplsApsMismatchReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Trap information indicates fully incompatible provisioning and
|
|
working/protection configuration mismatch recovery are detected by APS frame.
|
|
"
|
|
::= { hwMplsPsNotifications 4 }
|
|
|
|
hwMplsApsLost NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsPsWorkTunnName, hwMplsTunnelSignalProto }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Tunnel protection group did not receive APS frames from protection tunnel.
|
|
"
|
|
::= { hwMplsPsNotifications 5 }
|
|
|
|
|
|
hwMplsApsLostRecovery NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsPsWorkTunnName, hwMplsTunnelSignalProto }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Tunnel protection group received APS frames from protection tunnel.
|
|
"
|
|
::= { hwMplsPsNotifications 6 }
|
|
|
|
|
|
hwMplsOamPsConformance OBJECT IDENTIFIER ::= { hwMplsOamPs 100 }
|
|
|
|
|
|
hwMplsOamPsCompliances OBJECT IDENTIFIER ::= { hwMplsOamPsConformance 1 }
|
|
|
|
|
|
hwMplsOamPsGroupCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for mpls oam ps."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { hwMplsPsGroup, hwMplsVcPsGroup }
|
|
::= { hwMplsOamPsCompliances 1 }
|
|
|
|
|
|
hwMplsOamPsGroups OBJECT IDENTIFIER ::= { hwMplsOamPsConformance 2 }
|
|
|
|
|
|
hwMplsPsGroup OBJECT-GROUP
|
|
OBJECTS { hwMplsPsType, hwMplsPsWorkTunnName, hwMplsPsWorkTunnId, hwMplsPsProtectTunnName, hwMplsPsProtectTunnId,
|
|
hwMplsPsRevertiveMode, hwMplsPsWTR, hwMplsPsHoldOff, hwMplsPsSwitchCondition, hwMplsPsWorkTunnelState,
|
|
hwMplsPsProtTunnelState, hwMplsPsSwitchResult, hwMplsPsCfgType, hwMplsPsCfgProtectTunnId, hwMplsPsCfgRevertiveMode,
|
|
hwMplsPsCfgWTR, hwMplsPsCfgHoldOff, hwMplsPsRowStatus, hwTunnPsTrapOpen, hwMplsVCPsIfIndex,
|
|
hwMplsPsIndex }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for mpls oam ps management."
|
|
::= { hwMplsOamPsGroups 1 }
|
|
|
|
|
|
hwMplsVcPsGroup OBJECT-GROUP
|
|
OBJECTS { hwMplsVCPsTNLBinding, hwMplsTeReverseLspName, hwMplsVcPsRowStatus, hwMplsTeReverseLspLsrId, hwMplsTeReverseLspTunnId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for mpls oam ps reverse lsp."
|
|
::= { hwMplsOamPsGroups 2 }
|
|
|
|
|
|
hwMplsPsNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS { hwMplsPsSwitchPtoW, hwMplsPsSwitchWtoP, hwMplsApsMismatch, hwMplsApsMismatchRecovery }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwMplsOamPsGroups 3 }
|
|
|
|
|
|
|
|
END
|