compass-core/mibs/IANA-ITU-ALARM-TC-MIB.mib

390 lines
16 KiB
Plaintext

-- ===========================================================================
-- Copyright (C) 1998-2005 by HUAWEI TECHNOLOGIES. All rights reserved.
--
-- Description: Alarm MIB S
-- Reference: Module(IANA-ITU-ALARM-TC-MIB) Extracted from RFC3877.TXT,from 77752 to 91819.
-- Version: V1.00
-- History:
--
-- ===========================================================================
IANA-ITU-ALARM-TC-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, mib-2
FROM SNMPv2-SMI -- [RFC2578]
TEXTUAL-CONVENTION
FROM SNMPv2-TC; -- [RFC2579]
ianaItuAlarmNumbers MODULE-IDENTITY
LAST-UPDATED "200409090000Z" -- September 09, 2004
ORGANIZATION "IANA"
CONTACT-INFO
"Postal: Internet Assigned Numbers Authority
Internet Corporation for Assigned Names
and Numbers
4676 Admiralty Way, Suite 330
Marina del Rey, CA 90292-6601
USA
Tel: +1 310-823-9358
E-Mail: iana@iana.org"
DESCRIPTION
"The MIB module defines the ITU Alarm
textual convention for objects expected to require
regular extension.
Copyright (C) The Internet Society (2004). The
initial version of this MIB module was published
in RFC 3877. For full legal notices see the RFC
itself. Supplementary information may be available on:
http://www.ietf.org/copyrights/ianamib.html"
REVISION "200409090000Z" -- September 09, 2004
DESCRIPTION
"Initial version, published as RFC 3877."
::= { mib-2 119 }
IANAItuProbableCause ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"ITU-T probable cause values. Duplicate values defined in
X.733 are appended with X733 to ensure syntactic uniqueness.
Probable cause value 0 is reserved for special purposes.
The Internet Assigned Number Authority (IANA) is responsible
for the assignment of the enumerations in this TC.
IANAItuProbableCause value of 0 is reserved for special
purposes and MUST NOT be assigned.
Values of IANAItuProbableCause in the range 1 to 1023 are
reserved for causes that correspond to ITU-T probable cause.
All other requests for new causes will be handled on a
first-come, first served basis and will be assigned
enumeration values starting with 1025.
Request should come in the form of well-formed
SMI [RFC2578] for enumeration names that are unique and
sufficiently descriptive.
While some effort will be taken to ensure that new probable
causes do not conceptually duplicate existing probable
causes it is acknowledged that the existence of conceptual
duplicates in the starting probable cause list is an known
industry reality.
To aid IANA in the administration of probable cause names
and values, the OPS Area Director will appoint one or more
experts to help review requests.
See http://www.iana.org"
REFERENCE
"ITU Recommendation M.3100, 'Generic Network Information
Model', 1995
ITU Recommendation X.733, 'Information Technology - Open
Systems Interconnection - System Management: Alarm
Reporting Function', 1992
ITU Recommendation X.736, 'Information Technology - Open
Systems Interconnection - System Management: Security
Alarm Reporting Function', 1992"
SYNTAX INTEGER
{
-- The following probable causes were defined in M.3100
aIS (1),
callSetUpFailure (2),
degradedSignal (3),
farEndReceiverFailure (4),
framingError (5),
lossOfFrame (6),
lossOfPointer (7),
lossOfSignal (8),
payloadTypeMismatch (9),
transmissionError (10),
remoteAlarmInterface (11),
excessiveBER (12),
pathTraceMismatch (13),
unavailable (14),
signalLabelMismatch (15),
lossOfMultiFrame (16),
receiveFailure (17),
transmitFailure (18),
modulationFailure (19),
demodulationFailure (20),
broadcastChannelFailure (21),
connectionEstablishmentError (22),
invalidMessageReceived (23),
localNodeTransmissionError (24),
remoteNodeTransmissionError (25),
routingFailure (26),
--Values 27-50 are reserved for communications alarm related
--probable causes
-- The following are used with equipment alarm.
backplaneFailure (51),
dataSetProblem (52),
equipmentIdentifierDuplication (53),
externalIFDeviceProblem (54),
lineCardProblem (55),
multiplexerProblem (56),
nEIdentifierDuplication (57),
powerProblem (58),
processorProblem (59),
protectionPathFailure (60),
receiverFailure (61),
replaceableUnitMissing (62),
replaceableUnitTypeMismatch (63),
synchronizationSourceMismatch (64),
terminalProblem (65),
timingProblem (66),
transmitterFailure (67),
trunkCardProblem (68),
replaceableUnitProblem (69),
realTimeClockFailure (70),
--An equipment alarm to be issued if the system detects that the
--real time clock has failed
antennaFailure (71),
batteryChargingFailure (72),
diskFailure (73),
frequencyHoppingFailure (74),
iODeviceError (75),
lossOfSynchronisation (76),
lossOfRedundancy (77),
powerSupplyFailure (78),
signalQualityEvaluationFailure (79),
tranceiverFailure (80),
protectionMechanismFailure (81),
protectingResourceFailure (82),
-- Values 83-100 are reserved for equipment alarm related probable
-- causes
-- The following are used with environmental alarm.
airCompressorFailure (101),
airConditioningFailure (102),
airDryerFailure (103),
batteryDischarging (104),
batteryFailure (105),
commercialPowerFailure (106),
coolingFanFailure (107),
engineFailure (108),
fireDetectorFailure (109),
fuseFailure (110),
generatorFailure (111),
lowBatteryThreshold (112),
pumpFailure (113),
rectifierFailure (114),
rectifierHighVoltage (115),
rectifierLowFVoltage (116),
ventilationsSystemFailure (117),
enclosureDoorOpen (118),
explosiveGas (119),
fire (120),
flood (121),
highHumidity (122),
highTemperature (123),
highWind (124),
iceBuildUp (125),
intrusionDetection (126),
lowFuel (127),
lowHumidity (128),
lowCablePressure (129),
lowTemperatue (130),
lowWater (131),
smoke (132),
toxicGas (133),
coolingSystemFailure (134),
externalEquipmentFailure (135),
externalPointFailure (136),
-- Values 137-150 are reserved for environmental alarm related
-- probable causes
-- The following are used with Processing error alarm.
storageCapacityProblem (151),
memoryMismatch (152),
corruptData (153),
outOfCPUCycles (154),
sfwrEnvironmentProblem (155),
sfwrDownloadFailure (156),
lossOfRealTimel (157),
--A processing error alarm to be issued after the system has
--reinitialised. This will indicate
--to the management systems that the view they have of the managed
--system may no longer
--be valid. Usage example: The managed
--system issues this alarm after a reinitialization with severity
--warning to inform the
--management system about the event. No clearing notification will
--be sent.
applicationSubsystemFailure (158),
configurationOrCustomisationError (159),
databaseInconsistency (160),
fileError (161),
outOfMemory (162),
softwareError (163),
timeoutExpired (164),
underlayingResourceUnavailable (165),
versionMismatch (166),
--Values 168-200 are reserved for processing error alarm related
-- probable causes.
bandwidthReduced (201),
congestion (202),
excessiveErrorRate (203),
excessiveResponseTime (204),
excessiveRetransmissionRate (205),
reducedLoggingCapability (206),
systemResourcesOverload (207 ),
-- The following were defined X.733
adapterError (500),
applicationSubsystemFailture (501),
bandwidthReducedX733 (502),
callEstablishmentError (503),
communicationsProtocolError (504),
communicationsSubsystemFailure (505),
configurationOrCustomizationError (506),
congestionX733 (507),
coruptData (508),
cpuCyclesLimitExceeded (509),
dataSetOrModemError (510),
degradedSignalX733 (511),
dteDceInterfaceError (512),
enclosureDoorOpenX733 (513),
equipmentMalfunction (514),
excessiveVibration (515),
fileErrorX733 (516),
fireDetected (517),
framingErrorX733 (518),
heatingVentCoolingSystemProblem (519),
humidityUnacceptable (520),
inputOutputDeviceError (521),
inputDeviceError (522),
lanError (523),
leakDetected (524),
localNodeTransmissionErrorX733 (525),
lossOfFrameX733 (526),
lossOfSignalX733 (527),
materialSupplyExhausted (528),
multiplexerProblemX733 (529),
outOfMemoryX733 (530),
ouputDeviceError (531),
performanceDegraded (532),
powerProblems (533),
pressureUnacceptable (534),
processorProblems (535),
pumpFailureX733 (536),
queueSizeExceeded (537),
receiveFailureX733 (538),
receiverFailureX733 (539),
remoteNodeTransmissionErrorX733 (540),
resourceAtOrNearingCapacity (541),
responseTimeExecessive (542),
retransmissionRateExcessive (543),
softwareErrorX733 (544),
softwareProgramAbnormallyTerminated (545),
softwareProgramError (546),
storageCapacityProblemX733 (547),
temperatureUnacceptable (548),
thresholdCrossed (549),
timingProblemX733 (550),
toxicLeakDetected (551),
transmitFailureX733 (552),
transmiterFailure (553),
underlyingResourceUnavailable (554),
versionMismatchX733 (555),
-- The following are defined in X.736
authenticationFailure (600),
breachOfConfidentiality (601),
cableTamper (602),
delayedInformation (603),
denialOfService (604),
duplicateInformation (605),
informationMissing (606),
informationModificationDetected (607),
informationOutOfSequence (608),
keyExpired (609),
nonRepudiationFailure (610),
outOfHoursActivity (611),
outOfService (612),
proceduralError (613),
unauthorizedAccessAttempt (614),
unexpectedInformation (615),
other (1024)
}
IANAItuEventType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The ITU event Type values.
The Internet Assigned Number Authority (IANA) is
responsible for the assignment of the enumerations
in this TC.
Request should come in the form of well-formed
SMI [RFC2578] for enumeration names that are unique
and sufficiently descriptive.
See http://www.iana.org "
REFERENCE
"ITU Recommendation X.736, 'Information Technology - Open
Systems Interconnection - System Management: Security
Alarm Reporting Function', 1992"
SYNTAX INTEGER
{
other (1),
communicationsAlarm (2),
qualityOfServiceAlarm (3),
processingErrorAlarm (4),
equipmentAlarm (5),
environmentalAlarm (6),
integrityViolation (7),
operationalViolation (8),
physicalViolation (9),
securityServiceOrMechanismViolation (10),
timeDomainViolation (11)
}
END
-- ===========================================================================
-- Full Copyright Statement
--
-- Copyright (C) The Internet Society (2004). This document is subject
-- to the rights, licenses and restrictions contained in BCP 78, and
-- except as set forth therein, the authors retain all their rights.
--
-- This document and the information contained herein are provided on an
-- "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
-- OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
-- ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
-- INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
-- INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
-- WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
--
-- Intellectual Property
--
-- The IETF takes no position regarding the validity or scope of any
-- Intellectual Property Rights or other rights that might be claimed to
-- pertain to the implementation or use of the technology described in
-- this document or the extent to which any license under such rights
-- might or might not be available; nor does it represent that it has
-- made any independent effort to identify any such rights. Information
-- on the procedures with respect to rights in RFC documents can be
-- found in BCP 78 and BCP 79.
--
-- Copies of IPR disclosures made to the IETF Secretariat and any
-- assurances of licenses to be made available, or the result of an
-- attempt made to obtain a general license or permission for the use of
-- such proprietary rights by implementers or users of this
-- specification can be obtained from the IETF on-line IPR repository at
-- http://www.ietf.org/ipr.
--
-- The IETF invites any interested party to bring to its attention any
-- copyrights, patents or patent applications, or other proprietary
-- rights that may cover technology that may be required to implement
-- this standard. Please address the information to the IETF at ietf-
-- ipr@ietf.org.
--
-- Acknowledgement
--
-- Funding for the RFC Editor function is currently provided by the
-- Internet Society.
-- ===========================================================================