compass-core/mibs/HUAWEI-CONFIG-MAN-MIB.mib

1519 lines
55 KiB
Plaintext

-- =================================================================
-- Copyright (C) 2002 by HUAWEI TECHNOLOGIES. All rights reserved.
--
-- Description: configuration mangement mib
-- Reference: huawei enterprise mib
-- Version: V1.0
-- History:
-- initial version 2002-12-20
-- =================================================================
HUAWEI-CONFIG-MAN-MIB DEFINITIONS ::= BEGIN
IMPORTS
huaweiUtility
FROM HUAWEI-MIB
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
FROM SNMPv2-CONF
TimeTicks, IpAddress, Integer32, Unsigned32, Counter32,
OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
InetAddress FROM INET-ADDRESS-MIB -- [RFC4001]
DisplayString, TruthValue, RowStatus, TEXTUAL-CONVENTION,
DateAndTime
FROM SNMPv2-TC;
-- 1.3.6.1.4.1.2011.6.10
hwConfig MODULE-IDENTITY
LAST-UPDATED "200608222230Z" -- August 22, 2006 at 22:30 GMT
ORGANIZATION
"Huawei Technologies co.,Ltd."
CONTACT-INFO
"VRP Team Huawei Technologies co.,Ltd.
Huawei Bld.,NO.3 Xinxi Rd.,
Shang-Di Information Industry Base,
Hai-Dian District Beijing P.R. China
http://www.huawei.com
Zip:100085
"
DESCRIPTION
"The HUAWEI-CONFIG-MAN-MIB contains objects to manage the system configuration.
It defines the model used to represent configuration data that exists elsewhere
in the system and in peripheral devices. The MIB is proper for system configuration.
NMS can query configuration change log information and operate configuration.
There are no constraints on this MIB."
REVISION "200608222230Z" -- August 22, 2006 at 22:30 GMT
DESCRIPTION
"The initial revision of this MIB module ."
::= { huaweiUtility 10 }
--
-- Textual conventions
--
ConfigOperationType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Specify operation types on configuration.
Currently, following types of operation are provided:
running2Startup(1):refresh the saved configuration file used currently
with current configuration running in the system. The
operation is the same as that of
[save] command from command line.(running->startup)
startup2Running(2):append the configration of the saved configuration file used currently
to current configuration running in the system.(running<-startup)
running2Net(3):Send the current configuration running in the system to the network
through a certain protocol.(running->networkFile)
net2Running(4):append the configration of a remote file from network to current configuration running
in the system through a certain protocol.(running<-networkFile)
net2Startup(5):Download a remote file to the local system to be the saved configuration file used currently
through a certain protocol.(startup<-networkFile)
startup2Net(6):Send the saved configuration file used currently to the network
through a certain protocol. (startup ->networkFile)"
SYNTAX INTEGER
{
running2Startup(1),
startup2Running(2),
running2Net(3),
net2Running(4),
net2Startup(5),
startup2Net(6)
}
--
-- Node definitions
--
-- 1.3.6.1.4.1.2011.6.10.1
hwConfigManObjects OBJECT IDENTIFIER ::= { hwConfig 1 }
-- 1.3.6.1.4.1.2011.6.10.1.1
hwCfgLog OBJECT IDENTIFIER ::= { hwConfigManObjects 1 }
-- 1.3.6.1.4.1.2011.6.10.1.1.1
hwCfgRunModifiedLast OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object records the value of sysUpTime when the current configuration
running in the system was last modified."
::= { hwCfgLog 1 }
-- 1.3.6.1.4.1.2011.6.10.1.1.2
hwCfgRunSavedLast OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object records the value of sysUpTime when the current configuration
running in the system was last saved.
If the value of the object is smaller than
hwCfgRunModifiedLast, the current configuration has been
modified but not saved."
::= { hwCfgLog 2 }
-- 1.3.6.1.4.1.2011.6.10.1.1.3
hwCfgStartModifiedLast OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object records the value of sysUpTime when the saved configuration
used currently was last modified. It may have been changed by a save of the
current configuration running in the system or other methods such as copy."
::= { hwCfgLog 3 }
-- 1.3.6.1.4.1.2011.6.10.1.1.4
hwCfgLogLimitedEntries OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object shows the maximum number of rows in
hwCfgLogTable. The value supported by the system is 10.
"
::= { hwCfgLog 4 }
-- 1.3.6.1.4.1.2011.6.10.1.1.5
hwCfgLogDeletedEntries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of rows deleted from hwCfgLogTable.
"
::= { hwCfgLog 5 }
-- 1.3.6.1.4.1.2011.6.10.1.1.6
hwCfgLogWantBackup OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Decides whether or not to backup the configuration log information.
If the value is true, the data of configuration log on the master
will be sent to slave. Otherwise the data of log will be lost when
master switches to slave. Default value is true."
::= { hwCfgLog 6 }
-- 1.3.6.1.4.1.2011.6.10.1.1.7
hwCfgLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCfgLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of configuration log on this device.
"
::= { hwCfgLog 7 }
-- 1.3.6.1.4.1.2011.6.10.1.1.7.1
hwCfgLogEntry OBJECT-TYPE
SYNTAX HwCfgLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a configuration log in this system."
INDEX { hwCfgLogIndex }
::= { hwCfgLogTable 1 }
HwCfgLogEntry ::=
SEQUENCE {
hwCfgLogIndex
Integer32,
hwCfgLogTime
TimeTicks,
hwCfgLogSrcCmd
INTEGER,
hwCfgLogSrcData
INTEGER,
hwCfgLogDesData
INTEGER,
hwCfgLogTerminalType
INTEGER,
hwCfgLogTerminalUser
DisplayString,
hwCfgLogTerminalNum
Integer32,
hwCfgLogTerminalLocation
DisplayString,
hwCfgLogCmdSrcAddress
IpAddress,
hwCfgLogVirHost
DisplayString,
hwCfgLogUserName
DisplayString,
hwCfgLogServerAddress
IpAddress,
hwCfgLogFile
DisplayString,
hwCfgLogConfigChangeId
Unsigned32,
hwCfgLogCfgBaselineTime
DisplayString
}
-- 1.3.6.1.4.1.2011.6.10.1.1.7.1.1
hwCfgLogIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The index of hwCfgLogTable, which is a incremental integer.
The maximum value of the node is 2147483647.The table should wrap the
value to 1 and flush all the existing entries when the maximum value
is reached."
::= { hwCfgLogEntry 1 }
-- 1.3.6.1.4.1.2011.6.10.1.1.7.1.2
hwCfgLogTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the sysUpTime when the configuration log was generated."
::= { hwCfgLogEntry 2 }
-- 1.3.6.1.4.1.2011.6.10.1.1.7.1.3
hwCfgLogSrcCmd OBJECT-TYPE
SYNTAX INTEGER
{
cmdLine(1),
snmp(2),
netconf(3),
other(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the source command resulting in the log.
Currently we provide the types of source:
1.cmdLine(1):configuration log instigated by command line.
2.snmp(2):configuration log instigated by snmp.
3.other(3):configuration log instigated by other source unknown."
::= { hwCfgLogEntry 3 }
-- 1.3.6.1.4.1.2011.6.10.1.1.7.1.4
hwCfgLogSrcData OBJECT-TYPE
SYNTAX INTEGER
{
erase(1),
runningData(2),
commandSource(3),
startupData(4),
local(5),
netFtp(6),
hotPlugging(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configuration data source for the event.
erase erasing destination
running operational data alive
commandSource the command source itself
startup what the system will use next reboot
local local NVRAM or flash
netFtp FTP network transfer
hotPlugging board is inserted or pulled out on line
"
::= { hwCfgLogEntry 4 }
-- 1.3.6.1.4.1.2011.6.10.1.1.7.1.5
hwCfgLogDesData OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
runningData(2),
commandSource(3),
startupData(4),
local(5),
netkFtp(6),
hotPlugging(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configuration data destination for the event.
unknown unknown
running operational data alive
commandSource the command source itself
startup what the system will use next reboot
local local NVRAM or flash
netFtp FTP network transfer
hotPlugging board is inserted or pulled out on line"
::= { hwCfgLogEntry 5 }
-- 1.3.6.1.4.1.2011.6.10.1.1.7.1.6
hwCfgLogTerminalType OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable(1),
unknown(2),
console(3),
terminal(4),
virtual(5),
auxiliary(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the terminal type.
If hwCfgLogSrcData is not 'cmdLine', the value of the object is 'notApplicable'.
The value list:
notApplicable(1): no meaning at this time.
unknown(2): unknown terminal type.
console(3):
terminal(4)
virtual(5)
auxiliary(6)"
::= { hwCfgLogEntry 6 }
-- 1.3.6.1.4.1.2011.6.10.1.1.7.1.7
hwCfgLogTerminalUser OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..85))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The name of a logging user which is available when hwCfgLogSrcCmd
is 'cmdLine'. When hwCfgLogTerminalType is 'virtual' and user login
in authentication, the object will be the name of the user.
Otherwise, it is a zero length string."
::= { hwCfgLogEntry 7 }
-- 1.3.6.1.4.1.2011.6.10.1.1.7.1.8
hwCfgLogTerminalNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the terminal number.
If hwCfgLogSrcCmd variable is not 'cmdLine'(such as 'snmp'or 'other'), the value of the object is '-1'.
If hwCfgLogSrcCmd variable is 'cmdLine', the value '-1' means that it is not the active terminal user.
"
::= { hwCfgLogEntry 8 }
-- 1.3.6.1.4.1.2011.6.10.1.1.7.1.9
hwCfgLogTerminalLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The available location of the terminal when hwCfgLogSrcCmd
is 'cmdLine'. Otherwise, it is a zero length string.
"
::= { hwCfgLogEntry 9 }
-- 1.3.6.1.4.1.2011.6.10.1.1.7.1.10
hwCfgLogCmdSrcAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The address from which a request comes when the value of hwCfgLogSrcCmd is 'snmp(2)'.
The ip address of the remote system connected when the value of hwCfgLogTerminalType
is 'virtual'.
Otherwise, the value of the object is 0.0.0.0.
"
::= { hwCfgLogEntry 10 }
-- 1.3.6.1.4.1.2011.6.10.1.1.7.1.11
hwCfgLogVirHost OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The available host name of the remote system connected if
hwCfgLogTerminalType has the value of 'virtual'.
Otherwise, the value of the object is a zero length string.
"
::= { hwCfgLogEntry 11 }
-- 1.3.6.1.4.1.2011.6.10.1.1.7.1.12
hwCfgLogUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The user name used when hwCfgLogSrcData or hwCfgLogDesData has
the value of 'netFtp'.
Otherwise, the value of the object is a zero length string.
"
::= { hwCfgLogEntry 12 }
-- 1.3.6.1.4.1.2011.6.10.1.1.7.1.13
hwCfgLogServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote server address when hwCfgLogSrcData or hwCfgLogDesData
has the value of 'netFtp'.
Otherwise, the value of the object is 0.0.0.0.
"
::= { hwCfgLogEntry 13 }
-- 1.3.6.1.4.1.2011.6.10.1.1.7.1.14
hwCfgLogFile OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote file name when hwCfgLogSrcData or hwCfgLogDesData has
the value of 'netFtp'.
Otherwise, the value of the object is a zero length string.
"
::= { hwCfgLogEntry 14 }
-- 1.3.6.1.4.1.2011.6.10.1.1.7.1.15
hwCfgLogConfigChangeId OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967294)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This is the sequence ID of configuration. When configuration is changed, ID is added.
"
::= { hwCfgLogEntry 15 }
-- 1.3.6.1.4.1.2011.6.10.1.1.7.1.16
hwCfgLogCfgBaselineTime OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..20))
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Specifies the time of system confiuration was baseline.
"
::= { hwCfgLogEntry 16 }
-- 1.3.6.1.4.1.2011.6.10.1.2
hwCfgOperate OBJECT IDENTIFIER ::= { hwConfigManObjects 2 }
-- 1.3.6.1.4.1.2011.6.10.1.2.1
hwCfgOperateGlobalEntryLimit OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of copy entries that may be held
in hwCfgOperateTable. A particular setting does not guarantee
that much data can be held.
"
::= { hwCfgOperate 1 }
-- 1.3.6.1.4.1.2011.6.10.1.2.2
hwCfgOperateEntryAgeOutTime OBJECT-TYPE
SYNTAX Integer32 (1..60)
UNITS "minute"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value indicates the primary reference time of the hwCfgOperateEntry
saved in the hwCfgOperateTable.This value is not valid if there is extra
space in the hwCfgOperateTable, that is, the hwCfgOperateEntry is not deleted
periodically.
If there is no space in the hwCfgOperateTable to save a new hwCfgOperateEntry,
the expired hwCfgOperateEntry that is unactivated or the hwCfgOperateEntry
that is processed may be deleted. Default value is 5."
::= { hwCfgOperate 2 }
-- 1.3.6.1.4.1.2011.6.10.1.2.3
hwCfgOperateResultGlobalEntryLimit OBJECT-TYPE
SYNTAX Integer32(1..50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of copy entries that may be held
in hwCfgOperateResultTable. A particular setting does not guarantee
that much data can be held. Default value is 5.
"
::= { hwCfgOperate 3 }
-- 1.3.6.1.4.1.2011.6.10.1.2.4
hwCfgOperateTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCfgOperateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of config-operation requests.
"
::= { hwCfgOperate 4 }
-- 1.3.6.1.4.1.2011.6.10.1.2.4.1
hwCfgOperateEntry OBJECT-TYPE
SYNTAX HwCfgOperateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An operate request entry."
INDEX { hwCfgOperateIndex }
::= { hwCfgOperateTable 1 }
HwCfgOperateEntry ::=
SEQUENCE {
hwCfgOperateIndex
Integer32,
hwCfgOperateType
ConfigOperationType,
hwCfgOperateProtocol
INTEGER,
hwCfgOperateFileName
DisplayString,
hwCfgOperateServerAddress
IpAddress,
hwCfgOperateUserName
DisplayString,
hwCfgOperateUserPassword
DisplayString,
hwCfgOperateEndNotificationSwitch
TruthValue,
hwCfgOperateRowStatus
RowStatus,
hwCfgOperateServerPort
Integer32,
hwCfgOperateSourceAddress
IpAddress,
hwCfgOperateSourceInterface
OCTET STRING,
hwCfgOperateOnError
INTEGER
}
-- 1.3.6.1.4.1.2011.6.10.1.2.4.1.1
hwCfgOperateIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique index value of a row in this table."
::= { hwCfgOperateEntry 1 }
-- 1.3.6.1.4.1.2011.6.10.1.2.4.1.2
hwCfgOperateType OBJECT-TYPE
SYNTAX ConfigOperationType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the type of an operation on configuration.
For detailed information, please see the ConfigOperationType
definition.
"
::= { hwCfgOperateEntry 2 }
-- 1.3.6.1.4.1.2011.6.10.1.2.4.1.3
hwCfgOperateProtocol OBJECT-TYPE
SYNTAX INTEGER
{
ftp(1),
tftp(2),
sftp(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the value of hwCfgOperateType is running2Net,net2Running,net2Startup
or startup2net, this object specifies the protocol which is
used for file transfer .
The default protocol is ftp if no protocol is specified.
And for other value of hwCfgOperateType , this object may
be ignored by the implementation.
When hwCfgOperateProtocol is specified as SFTP, only password
authentication-type is valid. "
::= { hwCfgOperateEntry 3 }
-- 1.3.6.1.4.1.2011.6.10.1.2.4.1.4
hwCfgOperateFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When the object of hwCfgOperateType has the value of net2Startup, net2running or
running2Net, the value must be specified. The file name may include the path if
applicable.
If the value of hwCfgOperateType is net2Startup or net2running, this node specifies the
source file name of transfers. If the value of hwCfgOperateType is running2Net, this
node specifies the destination file name of transfers. If the value of hwCfgOperateType
is running2startup, this node specifies the saved file name of current running
configuration.
When hwCfgOperateType has the value of startup2net, the object may not be
created instead of using the file name of startup configuration file.
"
::= { hwCfgOperateEntry 4 }
-- 1.3.6.1.4.1.2011.6.10.1.2.4.1.5
hwCfgOperateServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When the operation type is running2Net,net2Running,net2Startup
or startup2net , the ip address of the FTP/TFTP/SFTP server from/to
which to download/upload must be specified.
Values of 0.0.0.0 or FF.FF.FF.FF are not permitted."
::= { hwCfgOperateEntry 5 }
-- 1.3.6.1.4.1.2011.6.10.1.2.4.1.6
hwCfgOperateUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When the operation type is running2Net,net2Running,net2Startup
or startup2net , the user
name for the FTP/SFTP server from/to which to download/upload
should be specified. The object must be created if hwCfgOperateProtocol
has the value of 'ftp'. "
::= { hwCfgOperateEntry 6 }
-- 1.3.6.1.4.1.2011.6.10.1.2.4.1.7
hwCfgOperateUserPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When the operation type is running2Net,net2Running,net2Startup
or startup2net , the user
password for the FTP/SFTP server from/to which to download/upload
should be specified. The object must be created if hwCfgOperateProtocol
has the value of 'ftp'. When get the value of the field, the device will return a zero-length string."
::= { hwCfgOperateEntry 7 }
-- 1.3.6.1.4.1.2011.6.10.1.2.4.1.8
hwCfgOperateEndNotificationSwitch OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies whether or not a notification should be
issued on the completion of the operation."
DEFVAL { false }
::= { hwCfgOperateEntry 8 }
-- 1.3.6.1.4.1.2011.6.10.1.2.4.1.9
hwCfgOperateRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this table entry.
When the status is active :
(1) In the situation that the specified transfer operation by
ftp/tftp is in progress, the transfer operation will be aborted
if the status is set to notInService.
(2) In any other situations, the specified operation will not be
aborted even if the status is set to notInService. "
::= { hwCfgOperateEntry 9 }
-- 1.3.6.1.4.1.2011.6.10.1.2.4.1.10
hwCfgOperateServerPort OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the SFTP/FTP server port that is used for file transfer
only if the value of hwCfgOperateProtocol is sftp/ftp.
The default SFTP server port is 22 if no port is specified.
The default FTP server port is 21 if no port is specified.
If the value of hwCfgOperateProtocol is not sftp/ftp, this object is ignored by the
implementation. "
::= { hwCfgOperateEntry 10 }
hwCfgOperateSourceAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source IP address. When the operation type is running2Net,
net2Running, net2Startup or startup2net, the source IP address
of the client may be specified or not. Default is 0.0.0.0 .
If the source type is set to both of IP address and interface,
the former has the priority."
DEFVAL { 0 }
::= { hwCfgOperateEntry 11 }
hwCfgOperateSourceInterface OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..47))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of the interface.When the operation type is running2Net,
net2Running,net2Startup or startup2net, the source interface
of the FTP/TFTP client may be specified or not. If the source
type is set to both of IP address and interface,the former has
the priority."
::= { hwCfgOperateEntry 12 }
-- 1.3.6.1.4.1.2011.6.10.1.2.4.1.13
hwCfgOperateOnError OBJECT-TYPE
SYNTAX INTEGER
{
continueOnError(1),
stopOnError(2),
rollbackOnError(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the action when a configuration command fails to be executed.
continueOnError: skips the failed configuration command and continues to run other configuration commands.
stopOnError: stops running the failed configuration command and does not run other configuration commands.
rollbackOnError: rolls back the configuration to that before the configuration file is executed."
::= { hwCfgOperateEntry 13 }
-- 1.3.6.1.4.1.2011.6.10.1.2.5
hwCfgOperateResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCfgOperateResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of config-operation requests result."
::= { hwCfgOperate 5 }
-- 1.3.6.1.4.1.2011.6.10.1.2.7.1
hwCfgOperateResultEntry OBJECT-TYPE
SYNTAX HwCfgOperateResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The result entries of configuration operation requests."
INDEX { hwCfgOperateResultIndex }
::= { hwCfgOperateResultTable 1 }
HwCfgOperateResultEntry ::=
SEQUENCE {
hwCfgOperateResultIndex
Integer32,
hwCfgOperateResultOptIndex
Integer32,
hwCfgOperateResultOpType
ConfigOperationType,
hwCfgOperateState
INTEGER,
hwCfgOperateTime
TimeTicks,
hwCfgOperateEndTime
TimeTicks,
hwCfgOperateTransferProgress
Integer32,
hwCfgOperateErrorReason
DisplayString
}
-- 1.3.6.1.4.1.2011.6.10.1.2.5.1.1
hwCfgOperateResultIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The index of Table, which is an incremental integer.
The maximum value of the node is 2147483647.The agent should wrap the
value to 1 and flush all the existing entries when the maximum value
is reached."
::= { hwCfgOperateResultEntry 1 }
-- 1.3.6.1.4.1.2011.6.10.1.2.5.1.2
hwCfgOperateResultOptIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operation index in the hwCfgOperateTable."
::= { hwCfgOperateResultEntry 2 }
-- 1.3.6.1.4.1.2011.6.10.1.2.5.1.3
hwCfgOperateResultOpType OBJECT-TYPE
SYNTAX ConfigOperationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operation type in the hwCfgOperateTable."
::= { hwCfgOperateResultEntry 3 }
-- 1.3.6.1.4.1.2011.6.10.1.2.5.1.4
hwCfgOperateState OBJECT-TYPE
SYNTAX INTEGER
{
opInProgress(1),
opSuccess(2),
opInvalidOperation(3),
opInvalidProtocol(4),
opInvalidSourceName(5),
opInvalidDestName(6),
opInvalidServerAddress(7),
opDeviceBusy(8),
opDeviceOpenError(9),
opDeviceError(10),
opDeviceNotProgrammable(11),
opDeviceFull(12),
opFileOpenError(13),
opFileTransferError(14),
opFileChecksumError(15),
opNoMemory(16),
opAuthFail(17),
opTimeOut(18),
opUnknownFailure(19),
opAbort(20),
opInvalidSourceAddress(21),
opInvalidSourceInterface(22),
opCmdExecuteFail(23)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the specified operation.
opInProgress :
specified operation is active
opOperationSuccess :
specified operation is supported and
completed successfully
opInvalidOperation :
command invalid or command/protocol/device
combination unsupported
opInvalidProtocol :
invalid protocol specified
opInvalidSourceName :
invalid source file name specified.
opInvalidDestName :
invalid target name specified.
opInvalidServerAddress :
invalid server address specified
opDeviceBusy :
specified device is in use and locked by
another process
opDeviceOpenError :
invalid device name
opDeviceError :
device read, write or erase error
opDeviceNotProgrammable :
device is read-only but a write or erase
operation was specified
opDeviceFull :
device is filled to capacity
opFileOpenError :
invalid file name; file not found in partition
opFileTransferError :
file transfer was unsuccessfull; network failure
opFileChecksumError :
file checksum in Flash failed
opNoMemory :
system running low on memory
opAuthFail:
invalid user name or password
opTimeOut :
file transfer was timeout
opUnknownFailure :
failure unknown
opAbort :
transfer operation has been aborted
opInvalidSourceAdress :
invalid source address specified.
opInvalidSourceInterface :
invalid source interface specified.
opCmdExecuteFail :
execute command return error.
"
::= { hwCfgOperateResultEntry 4 }
-- 1.3.6.1.4.1.2011.6.10.1.2.5.1.5
hwCfgOperateTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Records the time taken for the operation. This object will
be like a stopwatch, starting when the operation
starts, and stopping when the operation completes."
::= { hwCfgOperateResultEntry 5 }
-- 1.3.6.1.4.1.2011.6.10.1.2.5.1.6
hwCfgOperateEndTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the configuration operation is finished."
::= { hwCfgOperateResultEntry 6 }
-- 1.3.6.1.4.1.2011.6.10.1.2.5.1.7
hwCfgOperateTransferProgress OBJECT-TYPE
SYNTAX Integer32 (1..100 | 65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates progress of file transfer in the hwCfgOperateTable.
When hwCfgOperateProtocol is specified as 2(tftp) or 3(sftp), and hwCfgOperateType is specified as net2Running or net2Startup,
this object will be set as 65535, which indicates the progress can not be calculated. "
::= { hwCfgOperateResultEntry 7}
-- 1.3.6.1.4.1.2011.6.10.1.2.5.1.8
hwCfgOperateErrorReason OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The failure reason of configuration operation."
::= { hwCfgOperateResultEntry 8 }
-- 1.3.6.1.4.1.2011.6.10.1.2.6
hwCfgModuleChangeTimeTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCfgModuleChangeTimeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table on changes of configuration."
::= { hwCfgOperate 6 }
-- 1.3.6.1.4.1.2011.6.10.1.2.6.1
hwCfgModuleChangeTimeEntry OBJECT-TYPE
SYNTAX HwCfgModuleChangeTimeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Time entity on changes of the configuration module."
INDEX { hwCfgModuleId }
::= { hwCfgModuleChangeTimeTable 1 }
HwCfgModuleChangeTimeEntry ::=
SEQUENCE {
hwCfgModuleId
Integer32 (0..2147483647),
hwCfgModuleChangeTime
TimeTicks
}
-- 1.3.6.1.4.1.2011.6.10.1.2.6.1.1
hwCfgModuleId OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Module index. It is an integer without enumeration. This is because the enumeration may expose the classification methods of modules. In addition, this field is uncertain in the beginning stage and once the value is determined, it cannot be modified."
::= { hwCfgModuleChangeTimeEntry 1 }
-- 1.3.6.1.4.1.2011.6.10.1.2.6.1.11
hwCfgModuleChangeTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time on changes of the module."
::= { hwCfgModuleChangeTimeEntry 11 }
-- 1.3.6.1.4.1.2011.6.10.1.2.7
hwCfgOperateCompareConfig OBJECT-TYPE
SYNTAX INTEGER {initial(0),same(1),different(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"compare configuration of the files"
::= { hwCfgOperate 7 }
-- ==========================================================================
-- configuration save group
-- ==========================================================================
-- 1.3.6.1.4.1.2011.6.10.1.3
hwCfgSave OBJECT IDENTIFIER ::= { hwConfigManObjects 3 }
-- 1.3.6.1.4.1.2011.6.10.1.3.1
hwCfgSaveAutoInterval OBJECT-TYPE
SYNTAX Integer32(0|30..43200) --metric: minute
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object records the interval minute of saving configuration automatically.
the function of saving configuration automatically is disable when the interval is zero, else it is enable(the default is 30 minutes). "
::= { hwCfgSave 1 }
-- 1.3.6.1.4.1.2011.6.10.1.3.2
hwCfgSaveAutoTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object records the latest date and time when the current
configurations were saved automatically in the system."
::= { hwCfgSave 2 }
-- 1.3.6.1.4.1.2011.6.10.1.3.3
hwCfgSaveManualTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object records the latest date and time when the current
configurations were saved manually in the system."
::= { hwCfgSave 3 }
-- 1.3.6.1.4.1.2011.6.10.1.3.4
hwCfgSaveAutoCpuLimit OBJECT-TYPE
SYNTAX Integer32(1..60) --metric: %
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the upper limit of the CPU usage when configurations are
automatically saved.If the function of saving configuration automatically is not
enabled, the value is insignificant. Default value is 50."
::= { hwCfgSave 4 }
-- 1.3.6.1.4.1.2011.6.10.1.3.5
hwCfgSaveAutoNoCfgInterval OBJECT-TYPE
SYNTAX Integer32(30..43200) --metric: minute
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This object indicates the interval from the time configurations are automatically
saved to now.If the function of saving configuration automatically is not enabled,
the value is insignificant. Default value is 30."
::= { hwCfgSave 5 }
-- 1.3.6.1.4.1.2011.6.10.1.3.6
hwCfgSaveAutoDelay OBJECT-TYPE
SYNTAX Integer32(1..60) --metric: minute
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the delay minute after some configurations change happens
then configurations are automatically saved.If the function of saving configuration
automatically is not enabled, the value is insignificant. Default value is 5."
::= { hwCfgSave 6 }
-- 1.3.6.1.4.1.2011.6.10.1.3.7
hwCfgBackup2ServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCfgBackup2ServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of config-operation requests.
"
::= { hwCfgSave 7 }
-- 1.3.6.1.4.1.2011.6.10.1.3.7.1
hwCfgBackup2ServerEntry OBJECT-TYPE
SYNTAX HwCfgBackup2ServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An operate request entry."
INDEX { hwCfgBackupIndex }
::= { hwCfgBackup2ServerTable 1 }
HwCfgBackup2ServerEntry ::=
SEQUENCE {
hwCfgBackupIndex
Integer32,
hwCfgBackupServerIp
IpAddress,
hwCfgBackupProtocol
INTEGER,
hwCfgBackupUser
DisplayString,
hwCfgBackupPassword
DisplayString,
hwCfgBackupServerPath
DisplayString,
hwCfgBackupRowStatus
RowStatus,
hwCfgBackupResult
DisplayString
}
-- 1.3.6.1.4.1.2011.6.10.1.3.7.1.1
hwCfgBackupIndex OBJECT-TYPE
SYNTAX Integer32 (0..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique index value of a row in this table."
::= { hwCfgBackup2ServerEntry 1 }
-- 1.3.6.1.4.1.2011.6.10.1.3.7.1.2
hwCfgBackupServerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ip address of the FTP/TFTP/SFTP server to
which to the device backup configuration automatically.
Values of 0.0.0.0 or FF.FF.FF.FF are not permitted."
::= { hwCfgBackup2ServerEntry 2 }
-- 1.3.6.1.4.1.2011.6.10.1.3.7.1.3
hwCfgBackupProtocol OBJECT-TYPE
SYNTAX INTEGER
{
ftp(1),
tftp(2),
sftp(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The default protocol is ftp if no protocol is specified.
And for other value of hwCfgOperateType, this object may
be ignored by the implementation. "
::= { hwCfgBackup2ServerEntry 3 }
-- 1.3.6.1.4.1.2011.6.10.1.3.7.1.4
hwCfgBackupUser OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { hwCfgBackup2ServerEntry 4 }
-- 1.3.6.1.4.1.2011.6.10.1.3.7.1.5
hwCfgBackupPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16 | 24 | 32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The password can be plain text or encripted text.
If the password is plain text, its length should range from 0 to 16.
If the password is encripted text, its length should be 24 or 32.
When get the value of the field, the device will return a zero-length string."
::= { hwCfgBackup2ServerEntry 5 }
-- 1.3.6.1.4.1.2011.6.10.1.3.7.1.6
hwCfgBackupServerPath OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { hwCfgBackup2ServerEntry 6 }
-- 1.3.6.1.4.1.2011.6.10.1.3.7.1.7
hwCfgBackupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" "
::= { hwCfgBackup2ServerEntry 7 }
-- 1.3.6.1.4.1.2011.6.10.1.3.7.1.8
hwCfgBackupResult OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is only for trap information, and does not support get and get-next operation."
::= { hwCfgBackup2ServerEntry 8 }
-- ==========================================================================
-- configuration lock group
-- ==========================================================================
-- 1.3.6.1.4.1.2011.6.10.1.4
hwCfgLock OBJECT IDENTIFIER ::= { hwConfigManObjects 4 }
-- 1.3.6.1.4.1.2011.6.10.1.4.1
hwCfgOperateLockConfigDataStore OBJECT-TYPE
SYNTAX INTEGER
{
inactive(1),
active(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Config data unit lock/unlock controller,if set active(2),the lock will be locked if no one locked it before.
if set inactive(1),the lock will be unlocked if the currunt user locked it before.
"
::= { hwCfgLock 1 }
-- 1.3.6.1.4.1.2011.6.10.1.4.2
hwCfgOperateLevelUsersTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCfgOperateLevelUsersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table on users of configuration lock or level."
::= { hwCfgLock 2 }
-- 1.3.6.1.4.1.2011.6.10.1.4.2.1
hwCfgOperateLevelUsersEntry OBJECT-TYPE
SYNTAX HwCfgOperateLevelUsersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Users entity on lock or level of the configuration module."
INDEX { hwCfgOperateLevelUsersSessionID }
::= { hwCfgOperateLevelUsersTable 1 }
HwCfgOperateLevelUsersEntry ::=
SEQUENCE {
hwCfgOperateLevelUsersSessionID
Integer32,
hwCfgOperateLevelUsersSessionDesc
DisplayString,
hwCfgOperateLevelUsersName
DisplayString,
hwCfgOperateLevelUsersLockedTime
DisplayString,
hwCfgOperateLevelUsersIPAddr
DisplayString,
hwCfgOperateLevelUsersLastCfgTime
DisplayString,
hwCfgOperateLevelUsersTimeout
Integer32
}
-- 1.3.6.1.4.1.2011.6.10.1.4.2.1.1
hwCfgOperateLevelUsersSessionID OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SessionID of users who have the configuration level or have locked the configuration."
::= { hwCfgOperateLevelUsersEntry 1 }
-- 1.3.6.1.4.1.2011.6.10.1.4.2.1.2
hwCfgOperateLevelUsersSessionDesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description of users who have the configuration level or have locked the configuration."
::= { hwCfgOperateLevelUsersEntry 2 }
-- 1.3.6.1.4.1.2011.6.10.1.4.2.1.3
hwCfgOperateLevelUsersName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"UserName of users who have the configuration level or have locked the configuration."
::= { hwCfgOperateLevelUsersEntry 3 }
-- 1.3.6.1.4.1.2011.6.10.1.4.2.1.4
hwCfgOperateLevelUsersLockedTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LoginTime of users who have the configuration level or have locked the configuration."
::= { hwCfgOperateLevelUsersEntry 4 }
-- 1.3.6.1.4.1.2011.6.10.1.4.2.1.5
hwCfgOperateLevelUsersIPAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP Address of users who have the configuration level or have locked the configuration."
::= { hwCfgOperateLevelUsersEntry 5 }
-- 1.3.6.1.4.1.2011.6.10.1.4.2.1.6
hwCfgOperateLevelUsersLastCfgTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last configurate Time of users who have the configuration level or have locked the configuration."
::= { hwCfgOperateLevelUsersEntry 6 }
-- 1.3.6.1.4.1.2011.6.10.1.4.2.1.7
hwCfgOperateLevelUsersTimeout OBJECT-TYPE
SYNTAX Integer32 (1..7200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unlock without configuration seconds, 1-7200, the default is 30"
::= { hwCfgOperateLevelUsersEntry 7 }
-- ==========================================================================
-- configuration save group
-- ==========================================================================
-- 1.3.6.1.4.1.2011.6.10.2
hwConfigManNotifications OBJECT IDENTIFIER ::= { hwConfig 2 }
-- 1.3.6.1.4.1.2011.6.10.2.1
hwCfgManEventlog NOTIFICATION-TYPE
OBJECTS { hwCfgLogSrcCmd, hwCfgLogSrcData, hwCfgLogDesData, hwCfgLogTerminalUser, hwCfgLogCmdSrcAddress, hwCfgLogConfigChangeId, hwCfgLogTime, hwCfgLogCfgBaselineTime }
STATUS current
DESCRIPTION
"If the system configuration is changed,
a notification is generated."
::= { hwConfigManNotifications 1 }
-- 1.3.6.1.4.1.2011.6.10.2.2
hwCfgOperateCompletion NOTIFICATION-TYPE
OBJECTS { hwCfgOperateType, hwCfgOperateTime, hwCfgOperateState, hwCfgOperateEndTime }
STATUS current
DESCRIPTION
"When a configuration operation has been done, a
notification may be generated."
::= { hwConfigManNotifications 2 }
-- 1.3.6.1.4.1.2011.6.10.2.3
hwCfgInconsistent NOTIFICATION-TYPE
STATUS obsolete
DESCRIPTION
"When the system automatically detects
that configurations of the AMB and the SMB are inconsistent,
the trap is generated."
::= { hwConfigManNotifications 3 }
-- 1.3.6.1.4.1.2011.6.10.2.4
hwCfgInconsistentResume NOTIFICATION-TYPE
STATUS obsolete
DESCRIPTION
"When the system automatically detects
that configurations of the AMB and the SMB change
from inconsistent to consistent,
the trap is generated."
::= { hwConfigManNotifications 4 }
-- 1.3.6.1.4.1.2011.6.10.2.5
hwCfgB2STransferFail NOTIFICATION-TYPE
OBJECTS { hwCfgBackupIndex, hwCfgBackupServerIp, hwCfgBackupProtocol }
STATUS current
DESCRIPTION
"When the system failed to backup current configuration to
specified server, this trap will generate to indicates the
details information."
::= { hwConfigManNotifications 5 }
-- 1.3.6.1.4.1.2011.6.10.2.6
hwCfgB2SOperate NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"When the system begin to backup current configuration to
servers, this trap will generate."
::= { hwConfigManNotifications 6 }
-- 1.3.6.1.4.1.2011.6.10.3
hwConfigManConformance OBJECT IDENTIFIER ::= { hwConfig 3 }
-- 1.3.6.1.4.1.2011.6.10.3.1
hwConfigManCompliances OBJECT IDENTIFIER ::= { hwConfigManConformance 1 }
-- 1.3.6.1.4.1.2011.6.10.3.1.1
hwConfigManCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities implementing
the Huawei Configuration Management MIB"
MODULE -- this module
MANDATORY-GROUPS { hwCfgManLogGroup, hwCfgOperateGroup, hwCfgManNotificationGroup, hwCfgSaveGroup }
OBJECT hwCfgOperateType
SYNTAX ConfigOperationType
WRITE-SYNTAX INTEGER
{
running2Startup(1),
startup2Running(2),
running2Net(3),
net2Running(4),
net2Startup(5),
startup2Net(6)
}
DESCRIPTION
""
::= { hwConfigManCompliances 1 }
-- 1.3.6.1.4.1.2011.6.10.3.2
hwConfigManGroups OBJECT IDENTIFIER ::= { hwConfigManConformance 2 }
-- 1.3.6.1.4.1.2011.6.10.3.2.1
hwCfgManLogGroup OBJECT-GROUP
OBJECTS { hwCfgRunModifiedLast, hwCfgRunSavedLast, hwCfgStartModifiedLast, hwCfgLogLimitedEntries, hwCfgLogDeletedEntries,
hwCfgLogTime, hwCfgLogSrcCmd, hwCfgLogTerminalType, hwCfgLogTerminalNum, hwCfgLogTerminalUser,
hwCfgLogTerminalLocation, hwCfgLogCmdSrcAddress, hwCfgLogVirHost, hwCfgLogServerAddress, hwCfgLogFile,
hwCfgLogUserName, hwCfgLogWantBackup, hwCfgLogSrcData, hwCfgLogDesData, hwCfgLogConfigChangeId, hwCfgLogCfgBaselineTime }
STATUS current
DESCRIPTION
"A collection of objects configuration log group."
::= { hwConfigManGroups 1 }
-- 1.3.6.1.4.1.2011.6.10.3.2.2
hwCfgOperateGroup OBJECT-GROUP
OBJECTS { hwCfgOperateGlobalEntryLimit, hwCfgOperateEntryAgeOutTime, hwCfgOperateType, hwCfgOperateProtocol, hwCfgOperateFileName,
hwCfgOperateServerAddress, hwCfgOperateUserName, hwCfgOperateUserPassword, hwCfgOperateTime, hwCfgOperateEndNotificationSwitch,
hwCfgOperateResultGlobalEntryLimit, hwCfgOperateState, hwCfgOperateRowStatus, hwCfgOperateServerPort, hwCfgOperateSourceAddress, hwCfgOperateSourceInterface, hwCfgOperateOnError,hwCfgOperateObjectType,hwCfgOperateVpnInstanceName,hwCfgOperateTotalFileLength, hwCfgOperateResultOptIndex, hwCfgOperateResultOpType, hwCfgOperateEndTime,hwCfgOperateTransferProgress,hwCfgOperateErrorReason,
hwCfgModuleChangeTime, hwCfgOperateLockConfigDataStore, hwCfgOperateLevelUsersSessionID, hwCfgOperateLevelUsersSessionDesc,
hwCfgOperateLevelUsersName, hwCfgOperateLevelUsersLockedTime, hwCfgOperateLevelUsersIPAddr,hwCfgOperateLevelUsersLastCfgTime,hwCfgOperateLevelUsersTimeout}
STATUS current
DESCRIPTION
"A group of configuration operation."
::= { hwConfigManGroups 2 }
-- 1.3.6.1.4.1.2011.6.10.3.2.3
hwCfgManNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwCfgManEventlog, hwCfgOperateCompletion ,hwCfgInconsistent, hwCfgInconsistentResume }
STATUS current
DESCRIPTION
"Collection of notification objects."
::= { hwConfigManGroups 3 }
-- 1.3.6.1.4.1.2011.6.10.3.2.4
hwCfgSaveGroup OBJECT-GROUP
OBJECTS { hwCfgSaveAutoInterval, hwCfgSaveAutoTime, hwCfgSaveManualTime }
STATUS current
DESCRIPTION
"A group of configuration operation."
::= { hwConfigManGroups 4 }
END
--
-- HUAWEI-CONFIG-MAN-MIB.mib
--