compass-core/mibs/HUAWEI-STACK-MIB.mib

1230 lines
41 KiB
Plaintext

-- =====================================================================
-- Copyright (C) 2009 by HUAWEI TECHNOLOGIES. All rights reserved.
--
-- Description: Huawei Stack MIB
-- Reference: HUAWEI Stack MIB
-- Version: V1.0
-- History:
-- Friday, May 06, 2011 at 15:29:31
--
-- =====================================================================
HUAWEI-STACK-MIB DEFINITIONS ::= BEGIN
IMPORTS
entPhysicalIndex
FROM ENTITY-MIB
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
FROM SNMPv2-CONF
Integer32, IpAddress, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
EnabledStatus
FROM P-BRIDGE-MIB
TruthValue, MacAddress, RowStatus
FROM SNMPv2-TC
hwDatacomm
FROM HUAWEI-MIB;
huaweiStackMIB MODULE-IDENTITY
LAST-UPDATED "200902090000Z" -- February 09, 2009 GMT
ORGANIZATION
"Huawei Technologies Co., Ltd."
CONTACT-INFO
" VRP V5R3C19 ------ NSP"
DESCRIPTION
" "
::= { hwDatacomm 183 }
--
-- Node definitions
--
hwStackObject OBJECT IDENTIFIER ::= { huaweiStackMIB 1 }
hwStackRun OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of stack function on the device. The value enabled(1)
indicates this device's stack function is enabled. The value disabled(2)
indicates this device's stack function is disabled."
::= { hwStackObject 1 }
hwStackTopoType OBJECT-TYPE
SYNTAX INTEGER
{
ring(1),
link(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The topology of stack. "
::= { hwStackObject 2 }
hwStackMacAddressSwitchTime OBJECT-TYPE
SYNTAX Integer32 (0..60 | 255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Stack system's MAC address switch time. "
::= { hwStackObject 3 }
hwStackSystemMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The stack system's MAC address, it always be the master
device's MAC address. "
::= { hwStackObject 4 }
hwStackIsStackDevice OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value true(1) indicates that the device's stack
function is enable and it is in a stack system. When
false(2), the stack function is not enable or it is
not in a stack system. "
::= { hwStackObject 5 }
hwStackReservedVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Stack reserved-vlanId. "
::= { hwStackObject 6 }
hwStackClearUnsupportCfg OBJECT-TYPE
SYNTAX Integer32 (1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear the config which is not support stack. "
::= { hwStackObject 7 }
--
-- TABLE: hwStackMemberInfoTable definition
--
hwStackMemberInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwStackMemberInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of stack member switches. "
::= { hwStackObject 20 }
hwStackMemberInfoEntry OBJECT-TYPE
SYNTAX HwStackMemberInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Provide information of stack member."
INDEX { hwMemberCurrentStackId }
::= { hwStackMemberInfoTable 1 }
HwStackMemberInfoEntry ::=
SEQUENCE{
hwMemberCurrentStackId
Integer32,
hwMemberStackPriority
Integer32,
hwMemberStackRole
INTEGER,
hwMemberStackMacAddress
OCTET STRING,
hwMemberStackDeviceType
OCTET STRING,
hwMemberConfigStackId
Integer32,
hwMemberStackObjectId
OBJECT IDENTIFIER
}
hwMemberCurrentStackId OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Current stack ID. "
::= { hwStackMemberInfoEntry 1 }
hwMemberStackPriority OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Stack member's priority. "
::= { hwStackMemberInfoEntry 2 }
hwMemberStackRole OBJECT-TYPE
SYNTAX INTEGER
{
master(1),
standby(2),
slave(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The role of stack device in stack system. "
::= { hwStackMemberInfoEntry 3 }
hwMemberStackMacAddress OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of the stack device. "
::= { hwStackMemberInfoEntry 4 }
hwMemberStackDeviceType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device type of the stack device. "
::= { hwStackMemberInfoEntry 5 }
hwMemberConfigStackId OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set stack device stack ID. "
::= { hwStackMemberInfoEntry 6 }
hwMemberStackObjectId OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor's authoritative identification of the
network management subsystem contained in the
entity. This value is allocated within the SMI
enterprises subtree (1.3.6.1.4.1) and provides an
easy and unambiguous means for determining `what
kind of box' is being managed. For example, if
vendor `Flintstones, Inc.' was assigned the
subtree 1.3.6.1.4.1.4242, it could assign the
identifier 1.3.6.1.4.1.4242.1.1 to its `Fred
Router'."
::= { hwStackMemberInfoEntry 7 }
--
-- TABLE: hwStackPortTable definition
--
hwStackPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwStackPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of stack port. "
::= { hwStackObject 21 }
hwStackPortEntry OBJECT-TYPE
SYNTAX HwStackPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Provide information of the stack port. "
INDEX { hwStackPortStackId ,hwStackPortId }
::= { hwStackPortTable 1 }
HwStackPortEntry ::=
SEQUENCE {
hwStackPortStackId
Integer32,
hwStackPortId
Integer32,
hwStackPortName
OCTET STRING,
hwStackNeighborInfo
OCTET STRING,
hwStackPortStatus
INTEGER
}
hwStackPortStackId OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Stack device's ID. "
::= { hwStackPortEntry 1 }
hwStackPortId OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Stack port ID. "
::= { hwStackPortEntry 2 }
hwStackPortName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Stack port name. "
::= { hwStackPortEntry 3 }
hwStackNeighborInfo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Stack neighbor ID. "
::= { hwStackPortEntry 4 }
hwStackPortStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the stack port. "
::= { hwStackPortEntry 5 }
--
-- Trap :hwStackEventsV2 definition
--
hwStackEventsV2 OBJECT IDENTIFIER ::= { hwStackObject 22 }
hwStackLinkUp NOTIFICATION-TYPE
OBJECTS {hwStackPortStackId,hwStackPortId,hwStackPortStatus}
STATUS current
DESCRIPTION
"When the stack link turn to up status,
send a SNMP trap to network manager."
::= { hwStackEventsV2 1 }
hwStackLinkDown NOTIFICATION-TYPE
OBJECTS {hwStackPortStackId,hwStackPortId,hwStackPortStatus}
STATUS current
DESCRIPTION
"When the stack link turn to down status,
send a SNMP trap to network manager."
::= { hwStackEventsV2 2 }
hwStackStandbyChange NOTIFICATION-TYPE
OBJECTS { hwMemberCurrentStackId }
STATUS current
DESCRIPTION
"When the stack standby device change,
send a SNMP trap to network manager."
::= { hwStackEventsV2 3 }
hwStackSwitchOver NOTIFICATION-TYPE
OBJECTS { hwMemberCurrentStackId }
STATUS current
DESCRIPTION
"When the stack main device change,
send a SNMP trap to network manager."
::= { hwStackEventsV2 4 }
hwStackSystemRestart NOTIFICATION-TYPE
OBJECTS { hwMemberCurrentStackId }
STATUS current
DESCRIPTION
"When the stack system restart,
send a SNMP trap to network manager."
::= { hwStackEventsV2 5 }
hwStackStackMemberAdd NOTIFICATION-TYPE
OBJECTS { hwMemberCurrentStackId }
STATUS current
DESCRIPTION
" When a stack member join in,
send a SNMP trap to network manager. "
::= { hwStackEventsV2 6 }
hwStackStackMemberLeave NOTIFICATION-TYPE
OBJECTS { hwMemberCurrentStackId }
STATUS current
DESCRIPTION
" When a stack member leave,
send a SNMP trap to the network manager."
::= { hwStackEventsV2 7 }
hwStackStackMacChange NOTIFICATION-TYPE
OBJECTS { hwMemberStackMacAddress }
STATUS current
DESCRIPTION
" When the main stack device change, the stack system's
MAC address should change also. And we can set the MAC
address change time. When the MAC address change,send
a SNMP trap to network manager."
::= { hwStackEventsV2 8 }
hwStackLogicStackPortLinkErr NOTIFICATION-TYPE
OBJECTS { hwStackLocalIfName,hwStackPeerIfName }
STATUS current
DESCRIPTION
" When the stack port connect error,send
a SNMP trap to network manager."
::= { hwStackEventsV2 9 }
hwStackPhyStackPortLinkErr NOTIFICATION-TYPE
OBJECTS { hwStackLocalIfName,hwStackPeerIfName }
STATUS current
DESCRIPTION
" When the stack port connect error,send
a SNMP trap to network manager."
::= { hwStackEventsV2 10 }
hwPhyStackPortIsDown NOTIFICATION-TYPE
OBJECTS { hwStackLocalIfName }
STATUS current
DESCRIPTION
" When the stack port link state is down,send
a SNMP trap to network manager."
::= { hwStackEventsV2 11 }
--
-- TABLE: hwStackUpgradeTable definition
--
hwStackUpgradeTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwStackUpgradeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of flash copy operation entries. Each
entry represents a flash copy operation (to flash)
that has been initiated."
::= { hwStackObject 30 }
hwStackUpgradeEntry OBJECT-TYPE
SYNTAX HwStackUpgradeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A flash copy operation entry. Each entry consists
of a command, a source, and optional parameters such
as protocol to be used, a destination, a server address,
etc.
A management station wishing to create an entry should
first generate a pseudo-random serial number to be used
as the index to this sparse table. The station should
then create the associated instance of the row status
object. It must also, either in the same or in successive
PDUs, create the associated instance of the command and
parameter objects. It should also modify the default values
for any of the parameter objects if the defaults are not
appropriate.
Once the appropriate instances of all the command
objects have been created, either by an explicit SNMP
set request or by default, the row status should be set
to active to initiate the operation. Note that this entire
procedure may be initiated via a single set request which
specifies a row status of createAndGo as well as specifies
valid values for the non-defaulted parameter objects.
Once an operation has been activated, it cannot be stopped.
Once the operation completes, the management station should
retrieve the value of the status object, and delete the entry.
In order to prevent old entries from clogging the table,
entries will be aged out, but an entry will never be deleted
within 2 hours of completing."
INDEX { hwStackUpgradeIndex }
::= { hwStackUpgradeTable 1 }
HwStackUpgradeEntry ::=
SEQUENCE {
hwStackUpgradeIndex
Integer32,
hwStackUpgradeGrpType
INTEGER,
hwStackUpgradeGrpValue
OCTET STRING,
hwStackUpgradeFileType
INTEGER,
hwStackUpgradeFileInfo
OCTET STRING,
hwStackUpgradeFtpIp
IpAddress,
hwStackUpgradeFtpUserName
OCTET STRING,
hwStackUpgradeFtpPassword
OCTET STRING,
hwStackUpgradeServerPort
Integer32,
hwStackUpgradeFileSize
Integer32,
hwStackUpgradeTransmitProtocol
INTEGER,
hwStackUpgradeRowStatus
RowStatus
}
hwStackUpgradeIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Specifies the index of an entry. It is a
random value when creating an entry."
::= { hwStackUpgradeEntry 1 }
hwStackUpgradeGrpType OBJECT-TYPE
SYNTAX INTEGER
{
allMembers(1),
memberIdList(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Type of stack grouping member switches."
DEFVAL { allMembers }
::= { hwStackUpgradeEntry 2 }
hwStackUpgradeGrpValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..18))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Details about stack grouping member switches for memberIdList.
Optional, This object will be ignored for allMembers ."
::= { hwStackUpgradeEntry 3 }
hwStackUpgradeFileType OBJECT-TYPE
SYNTAX INTEGER
{
startupFile(1),
patchFile(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Type of the file to be upgraded."
::= { hwStackUpgradeEntry 4 }
hwStackUpgradeFileInfo OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Path and type of the file to be upgraded."
::= { hwStackUpgradeEntry 5 }
hwStackUpgradeFtpIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address of remote host acting as server for any operation.
The default value of which is 255.255.255.255."
DEFVAL { 'FFFFFFFF'h }
::= { hwStackUpgradeEntry 6 }
hwStackUpgradeFtpUserName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When use FTP to transfer files, the user name must be
specified by this node."
::= { hwStackUpgradeEntry 7 }
hwStackUpgradeFtpPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Remote user password for copy via FTP protocol. "
::= { hwStackUpgradeEntry 8 }
hwStackUpgradeServerPort OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This object specifies the SFTP server port that is used for file transfer
only SFTP is valid. The default SFTP server port is 22 if no port is specified.
If the value of protocol is not SFTP, this object is ignored by the
implementation."
::= { hwStackUpgradeEntry 9 }
hwStackUpgradeFileSize OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the reserved space (in BYTE) guaranteed by a host.
The value 0 indicates that no space need be reserved. This object is optional
in the Set operation of file upload. The default value is 0. This object is unavailable
in the Set operation of file download. "
::= { hwStackUpgradeEntry 10 }
hwStackUpgradeTransmitProtocol OBJECT-TYPE
SYNTAX INTEGER
{
ftp(1),
sftp(2),
tftp(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the protocol used to transfer file.
The default value of it is FTP."
DEFVAL { ftp }
::= { hwStackUpgradeEntry 11 }
hwStackUpgradeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this table entry. Only used createAndGo and destroy."
::= { hwStackUpgradeEntry 51 }
--
-- TABLE: hwStackMemberPortEnableTable definition
--
hwStackMemberPortEnableTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwStackMemberPortEnableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of stack physical port. "
::= { hwStackObject 23 }
hwStackMemberPortEnableEntry OBJECT-TYPE
SYNTAX HwStackMemberPortEnableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Provide information of the physical port. "
INDEX { entPhysicalIndex }
::= { hwStackMemberPortEnableTable 1 }
HwStackMemberPortEnableEntry ::=
SEQUENCE {
hwEnableStackMode
INTEGER
}
hwEnableStackMode OBJECT-TYPE
SYNTAX INTEGER
{
yes(1),
no(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If enable stack mode. "
DEFVAL { no }
::= { hwStackMemberPortEnableEntry 1 }
--
-- TABLE: hwAddingPhyPortToStackPortTable definition
--
hwAddingPhyPortToStackPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAddingPhyPortToStackPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of a stack port's member port. "
::= { hwStackObject 24 }
hwAddingPhyPortToStackPortEntry OBJECT-TYPE
SYNTAX HwAddingPhyPortToStackPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Provide information of a stack port's member port. "
INDEX { hwEnabledStackModePhyPortIndex }
::= { hwAddingPhyPortToStackPortTable 1 }
HwAddingPhyPortToStackPortEntry ::=
SEQUENCE {
hwEnabledStackModePhyPortIndex
Integer32,
hwStackPortID
INTEGER
}
hwEnabledStackModePhyPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enabled stack mode's physical name "
::= { hwAddingPhyPortToStackPortEntry 1 }
hwStackPortID OBJECT-TYPE
SYNTAX INTEGER
{
port1(1),
port2(2),
unjoinable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"adding to which stack port
1: added to stack port 1
2: added to stack port 2
3: did not add to any stack port "
::= { hwAddingPhyPortToStackPortEntry 2 }
--
-- TABLE: hwStackUpgradeResultTable definition
--
hwStackUpgradeResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwStackUpgradeResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Results of upgrade commands returned from stack member switches."
::= { hwStackObject 31 }
hwStackUpgradeResultEntry OBJECT-TYPE
SYNTAX HwStackUpgradeResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Provides the result of stack switchs upgrade entry. "
INDEX { hwStackUpgradeResultIndex, hwStackUpgradeResultMemberId }
::= { hwStackUpgradeResultTable 1 }
HwStackUpgradeResultEntry ::=
SEQUENCE {
hwStackUpgradeResultIndex
Integer32,
hwStackUpgradeResultMemberId
Integer32,
hwStackUpgradeResult
INTEGER,
hwStackUpgradeResultInProcess
Integer32,
hwStackUpgradeResultFailReason
INTEGER
}
hwStackUpgradeResultIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Specifies the index of an entry. It is a
random value when creating an entry."
::= { hwStackUpgradeResultEntry 1 }
hwStackUpgradeResultMemberId OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifier of the stack member switch."
::= { hwStackUpgradeResultEntry 2 }
hwStackUpgradeResult OBJECT-TYPE
SYNTAX INTEGER
{
success(1),
failure(2),
running(3),
timeout(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Results of upgrade commands returned from stack member switches."
::= { hwStackUpgradeResultEntry 3 }
hwStackUpgradeResultInProcess OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upgrade is in process."
::= { hwStackUpgradeResultEntry 4 }
hwStackUpgradeResultFailReason OBJECT-TYPE
SYNTAX INTEGER
{
opUpgradeSuccess(1),
opMasterDiskNoSpace(2),
opNonmasterDiskNoSpace(3),
opInvalidFileInfo(4),
opInvalidFileType(5),
opInvalidServerAddress(6),
opInvalidUserOrPassword(7),
opDeviceBusy(8),
opFileTransferError(9),
opFileChecksumError(10),
opNoMemory(11),
opCurrentVersionFileConfilt(12),
opUpgradeDeviceAbsent(13),
opUnknownFailure(14),
opUpgradeInvalidValue(15)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of operation. Only upgrade failure valid.
The status of the specified operation can be one of the follows.
opUpgradeSuccess(1): upgrade success.
opMasterDiskNoSpace(2): flash of master device is no enough space.
opNonmasterDiskNoSpace(3): flash of non-master device is no enough space.
opInvalidFileInfo(4) :invalid source file name or path is specified.
opInvalidFileType(5) :invalid file type.
opInvalidServerAddress(6) :invalid server address is specified.
opInvalidUserOrPassword(7):invalid server user or password.
opDeviceBusy(8) :the device is in use and locked by another process
opFileTransferError(9) :file transfer was unsuccessfull.
opFileChecksumError(10) :file checksum in Flash si invalid.
opNoMemory(11) :system is running in low on memory.
opCurrentVersionFileConfilt(12) : conflict between target file and system file.
opUpgradeDeviceAbsent(13) : device absent.
opUnknownFailure(14) :failure which is unknown.
opUpgradeInvalidValue(15):invalid value.
"
::= { hwStackUpgradeResultEntry 5 }
hwStackTrapObject OBJECT IDENTIFIER ::= { hwStackObject 32 }
hwStackLocalIfName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Interface name."
::= { hwStackTrapObject 1 }
hwStackPeerIfName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The peer interface name."
::= { hwStackTrapObject 2 }
hwStackConnectErrReason OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Connection error reason."
::= { hwStackTrapObject 3 }
--
-- Node compliance check
--
hwStackConformance OBJECT IDENTIFIER ::= { huaweiStackMIB 2 }
hwStackGroups OBJECT IDENTIFIER ::= { hwStackConformance 1 }
hwStackObjectGroup OBJECT-GROUP
OBJECTS {hwStackRun, hwStackTopoType, hwStackMacAddressSwitchTime, hwStackSystemMac, hwStackIsStackDevice,hwStackReservedVlanId,
hwStackClearUnsupportCfg,hwMemberCurrentStackId,hwMemberStackPriority, hwMemberStackRole, hwMemberStackMacAddress,hwMemberStackDeviceType,
hwMemberConfigStackId, hwMemberStackObjectId, hwStackPortStackId , hwStackPortId , hwStackPortName,hwStackNeighborInfo, hwStackPortStatus, hwStackUpgradeGrpType,
hwStackUpgradeGrpValue, hwStackUpgradeFileType, hwStackUpgradeFileInfo, hwStackUpgradeFtpIp, hwStackUpgradeFtpUserName, hwStackUpgradeFtpPassword,
hwStackUpgradeServerPort, hwStackUpgradeFileSize, hwStackUpgradeTransmitProtocol,hwStackUpgradeRowStatus, hwStackUpgradeResultMemberId,
hwStackUpgradeResult, hwStackUpgradeResultInProcess, hwStackUpgradeResultFailReason}
STATUS current
DESCRIPTION
" Enter the description of the created OBJECT-GROUP."
::= { hwStackGroups 1 }
hwStackNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwStackLinkUp , hwStackLinkDown ,hwStackStandbyChange, hwStackSwitchOver, hwStackSystemRestart, hwStackStackMemberAdd, hwStackStackMemberLeave, hwStackStackMacChange, hwStackLogicStackPortLinkErr, hwStackPhyStackPortLinkErr, hwPhyStackPortIsDown }
STATUS current
DESCRIPTION
"Enter the description of the created NOTIFICATION-GROUP."
::= { hwStackGroups 2 }
hwStackTrapGroup OBJECT-GROUP
OBJECTS {hwStackLocalIfName, hwStackPeerIfName}
STATUS current
DESCRIPTION
"Enter the description of the created OBJECT-GROUP."
::= { hwStackGroups 3 }
hwStackCompliances OBJECT IDENTIFIER ::= { hwStackConformance 2 }
hwBasicCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Enter the description of the created MODULE-COMPLIANCE."
MODULE -- this module
MANDATORY-GROUPS { hwStackObjectGroup, hwStackNotificationGroup }
::= { hwStackCompliances 1 }
hwCssObject OBJECT IDENTIFIER ::= { huaweiStackMIB 3 }
hwCssGlobalObject OBJECT IDENTIFIER ::= { hwCssObject 1 }
hwCssEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CSS enable status."
::= { hwCssGlobalObject 1 }
hwCssMemberInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCssMemberInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CSS member information."
::= { hwCssObject 2 }
hwCssMemberInfoEntry OBJECT-TYPE
SYNTAX HwCssMemberInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of CSS member information table."
INDEX { hwCssMemberFrameId }
::= { hwCssMemberInfoTable 1 }
HwCssMemberInfoEntry ::=
SEQUENCE {
hwCssMemberFrameId
Integer32,
hwCssMemberConfigFrameId
Integer32,
hwCssMemberPriority
Integer32,
hwCssMemberConfigPriority
Integer32,
hwCssMemberMasterForce
EnabledStatus,
hwCssMemberConfigMasterForce
EnabledStatus,
hwCssMemberConfigEnable
EnabledStatus,
hwCssMemberRole
INTEGER
}
hwCssMemberFrameId OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frame id for CSS member."
::= { hwCssMemberInfoEntry 1 }
hwCssMemberConfigFrameId OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configured frame id for CSS member."
::= { hwCssMemberInfoEntry 2 }
hwCssMemberPriority OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Priority for CSS member."
::= { hwCssMemberInfoEntry 3 }
hwCssMemberConfigPriority OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configured priority for CSS member."
::= { hwCssMemberInfoEntry 4 }
hwCssMemberMasterForce OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Force master status for CSS member."
::= { hwCssMemberInfoEntry 5 }
hwCssMemberConfigMasterForce OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configured force master status CSS member."
::= { hwCssMemberInfoEntry 6 }
hwCssMemberConfigEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configured enable status for CSS member."
::= { hwCssMemberInfoEntry 7 }
hwCssMemberRole OBJECT-TYPE
SYNTAX INTEGER
{
master(1),
backup(2),
slave(3),
single(4),
unknown(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CSS member's role define."
::= { hwCssMemberInfoEntry 8 }
hwCssTrap OBJECT IDENTIFIER ::= { hwCssObject 3 }
hwCssTrapObjects OBJECT IDENTIFIER ::= { hwCssTrap 1 }
hwCssTrapFrameId1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"CSS trap message frame id parameter."
::= { hwCssTrapObjects 1 }
hwCssTrapSlotId1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"CSS trap message slot id parameter."
::= { hwCssTrapObjects 2 }
hwCssTrapPortId1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"CSS trap message port id parameter."
::= { hwCssTrapObjects 3 }
hwCssTrapFrameId2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"CSS trap message frame id parameter."
::= { hwCssTrapObjects 4 }
hwCssTrapSlotId2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"CSS trap message slot id parameter."
::= { hwCssTrapObjects 5 }
hwCssTrapPortId2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"CSS trap message port id parameter."
::= { hwCssTrapObjects 6 }
hwCssTrapFrameId3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"CSS trap message frame id parameter."
::= { hwCssTrapObjects 7 }
hwCssTrapSlotId3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"CSS trap message slot id parameter."
::= { hwCssTrapObjects 8 }
hwCssTrapPortId3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"CSS trap message port id parameter."
::= { hwCssTrapObjects 9 }
hwCssTraps OBJECT IDENTIFIER ::= { hwCssTrap 2 }
hwCssLinkDown NOTIFICATION-TYPE
OBJECTS { hwCssTrapFrameId1, hwCssTrapSlotId1, hwCssTrapPortId1 }
STATUS current
DESCRIPTION
"CSS link down trap message."
::= { hwCssTraps 1 }
hwCssLinkUp NOTIFICATION-TYPE
OBJECTS { hwCssTrapFrameId1, hwCssTrapSlotId1, hwCssTrapPortId1 }
STATUS current
DESCRIPTION
"CSS link up trap message."
::= { hwCssTraps 2 }
hwCssSwitchOver NOTIFICATION-TYPE
OBJECTS { hwCssTrapFrameId1 }
STATUS current
DESCRIPTION
"CSS switch over trap message."
::= { hwCssTraps 3 }
hwCssConnectError NOTIFICATION-TYPE
OBJECTS { hwCssTrapFrameId1, hwCssTrapSlotId1, hwCssTrapPortId1, hwCssTrapFrameId2, hwCssTrapSlotId2,
hwCssTrapPortId2, hwCssTrapFrameId3, hwCssTrapSlotId3, hwCssTrapPortId3 }
STATUS current
DESCRIPTION
"CSS connect error trap message."
::= { hwCssTraps 4 }
hwCssSplit NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"CSS split trap message."
::= { hwCssTraps 5 }
hwCssEstablish NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"CSS establish trap message."
::= { hwCssTraps 6 }
hwCssFastUpgradeFail NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"CSS fast upgrade fail."
::= { hwCssTraps 7 }
hwCssPhyCsuConnectError NOTIFICATION-TYPE
OBJECTS {hwStackLocalIfName, hwStackPeerIfName, hwStackConnectErrReason }
STATUS current
DESCRIPTION
"CSS connect error trap message."
::= { hwCssTraps 8 }
hwCssConformance OBJECT IDENTIFIER ::= { huaweiStackMIB 4 }
hwCssGroups OBJECT IDENTIFIER ::= { hwCssConformance 1 }
hwCssObjectGroup OBJECT-GROUP
OBJECTS { hwCssMemberFrameId, hwCssMemberConfigFrameId, hwCssMemberPriority, hwCssMemberConfigPriority, hwCssMemberMasterForce,
hwCssMemberConfigMasterForce, hwCssMemberConfigEnable, hwCssMemberRole, hwCssEnable }
STATUS current
DESCRIPTION
"CSS mib group: object."
::= { hwCssGroups 1 }
hwCssTrapObjectGroup OBJECT-GROUP
OBJECTS { hwCssTrapFrameId2, hwCssTrapSlotId2, hwCssTrapPortId2, hwCssTrapFrameId3, hwCssTrapSlotId3,
hwCssTrapPortId3, hwCssTrapFrameId1, hwCssTrapSlotId1, hwCssTrapPortId1 }
STATUS current
DESCRIPTION
"CSS mib group: trap."
::= { hwCssGroups 2 }
hwCssNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwCssLinkDown, hwCssLinkUp, hwCssSwitchOver, hwCssConnectError, hwCssSplit,
hwCssEstablish, hwCssFastUpgradeFail, hwCssPhyCsuConnectError }
STATUS current
DESCRIPTION
"CSS mib group: notification."
::= { hwCssGroups 3 }
hwCssCompliances OBJECT IDENTIFIER ::= { hwCssConformance 2 }
hwCssCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"CSS mib compliance."
::= { hwCssCompliances 1 }
END
--
-- HUAWEI-STACK-MIB.mib
--