1949 lines
73 KiB
Plaintext
1949 lines
73 KiB
Plaintext
-- ==================================================================
|
|
-- Copyright (C) 2007 by HUAWEI TECHNOLOGIES. All rights reserved.
|
|
--
|
|
-- Description: HUAWEI Private MIB
|
|
-- Reference:
|
|
-- Version: V1.0
|
|
-- History: V1.0 qiyanqing, 2007-05-14, publish
|
|
|
|
-- ==================================================================
|
|
|
|
|
|
HUAWEI-TUNNEL-TE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
hwDatacomm
|
|
FROM HUAWEI-MIB
|
|
InterfaceIndex
|
|
FROM IF-MIB
|
|
MplsIndexType
|
|
FROM MPLS-LSR-STD-MIB
|
|
MplsTunnelIndex, MplsTunnelInstanceIndex, MplsExtendedTunnelId
|
|
FROM MPLS-TC-STD-MIB
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCE
|
|
FROM SNMPv2-CONF
|
|
Integer32, Unsigned32, Counter32, Counter64, BITS, OBJECT-TYPE,
|
|
MODULE-IDENTITY, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
TruthValue, TimeStamp, RowStatus
|
|
FROM SNMPv2-TC;
|
|
|
|
hwTunnelTeMib MODULE-IDENTITY
|
|
LAST-UPDATED "200706101559Z" -- June 10, 2007 at 15:59 GMT
|
|
ORGANIZATION
|
|
"Huawei Technologies Co., Ltd."
|
|
CONTACT-INFO
|
|
"MPLS Team Huawei Technologies co.,Ltd.
|
|
Huawei Bld.,NO.3 Xinxi Rd.,
|
|
Shang-Di Information Industry Base,
|
|
Hai-Dian District Beijing P.R. China
|
|
http://www.huawei.com
|
|
Zip:100085
|
|
"
|
|
DESCRIPTION
|
|
"This MIB contains private managed object
|
|
definitions for the binding information."
|
|
REVISION "200606301554Z" -- June 30, 2006 at 15:54 GMT
|
|
DESCRIPTION
|
|
"Initial version 2006/06/10,MPLS LSPM MIB GROUP."
|
|
::= { hwDatacomm 151 }
|
|
|
|
|
|
|
|
--
|
|
-- Node definitions
|
|
--
|
|
|
|
|
|
hwTunnelTeMibObject OBJECT IDENTIFIER ::= { hwTunnelTeMib 1 }
|
|
|
|
|
|
|
|
hwTunnelDiffServTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwTunnelDiffServEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table describes the different service mode of tunnel."
|
|
::= { hwTunnelTeMibObject 1}
|
|
|
|
|
|
|
|
hwTunnelDiffServEntry OBJECT-TYPE
|
|
SYNTAX HwTunnelDiffServEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interface different service mode attribute configuration."
|
|
INDEX { hwTunnelDiffServIndex }
|
|
::= {hwTunnelDiffServTable 1}
|
|
|
|
HwTunnelDiffServEntry ::=
|
|
SEQUENCE {
|
|
hwTunnelDiffServIndex
|
|
InterfaceIndex,
|
|
hwTunnelDiffServMode
|
|
INTEGER,
|
|
hwTunnelDiffServServiceClass
|
|
INTEGER,
|
|
hwTunnelDiffServColor
|
|
INTEGER,
|
|
hwTunnelTeFlowQueue
|
|
OCTET STRING
|
|
}
|
|
|
|
|
|
hwTunnelDiffServIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uniquely identifies a set of tunnel instances
|
|
between a pair of ingress and egress LSRs.
|
|
Managers should obtain new values for row
|
|
creation in this table by reading mplsTunnelIndexNext.
|
|
When the MPLS signalling protocol is rsvp(2),this value
|
|
should be equal to the value signalled in the Tunnel ID
|
|
of the session object. When the MPLS signalling protocol
|
|
is crldp(3) this value should be equal to the value
|
|
signalled in the LSP ID. Reference to MPLS-TE-STD-MIB."
|
|
::= { hwTunnelDiffServEntry 1 }
|
|
|
|
hwTunnelDiffServMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
pipe(1),
|
|
uniform(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Different service mode of TE interface, default is uniform."
|
|
::= { hwTunnelDiffServEntry 2 }
|
|
|
|
hwTunnelDiffServServiceClass OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
be(1),
|
|
af1(2),
|
|
af2(3),
|
|
af3(4),
|
|
af4(5),
|
|
ef(6),
|
|
cs6(7),
|
|
cs7(8),
|
|
invalidClass(255)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PHB in the ingress PE, the value must be
|
|
be,af1,af2,af3,af4,ef,cs6,cs7.The default class is invalidClass(255)."
|
|
::= { hwTunnelDiffServEntry 3 }
|
|
|
|
|
|
hwTunnelDiffServColor OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
green(1),
|
|
yellow(2),
|
|
red(3),
|
|
invalidColor(255)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remarked color of packet in the ingress
|
|
PE, the value must be green,yellow,red.The default color is invalidColor(255)."
|
|
::= { hwTunnelDiffServEntry 4 }
|
|
|
|
hwTunnelTeFlowQueue OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..31))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of flow-queue template."
|
|
::= { hwTunnelDiffServEntry 5 }
|
|
|
|
hwTunnelTeVsiTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwTunnelTeVsiEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The table describes the VPN binding of Tunnel."
|
|
::= { hwTunnelTeMibObject 2 }
|
|
|
|
|
|
hwTunnelTeVsiEntry OBJECT-TYPE
|
|
SYNTAX HwTunnelTeVsiEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The L2VPN VSI binding configuration of tunnel interface."
|
|
INDEX { hwTunnelTeVsiIndex,hwTunnelTeVsiName }
|
|
::= {hwTunnelTeVsiTable 1}
|
|
|
|
HwTunnelTeVsiEntry ::=
|
|
SEQUENCE {
|
|
hwTunnelTeVsiIndex
|
|
InterfaceIndex,
|
|
hwTunnelTeVsiName
|
|
OCTET STRING,
|
|
hwTunnelTeVsiCir
|
|
Integer32,
|
|
hwTunnelTeVsiPir
|
|
Integer32,
|
|
hwTunnelTeVsiFlowQueue
|
|
OCTET STRING
|
|
}
|
|
|
|
hwTunnelTeVsiIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Uniquely identifies a set of tunnel instances
|
|
between a pair of ingress and egress LSRs.
|
|
Managers should obtain new values for row
|
|
creation in this table by reading mplsTunnelIndexNext.
|
|
When the MPLS signalling protocol is rsvp(2),this value
|
|
should be equal to the value signalled in the tunnel ID
|
|
of the session object. When the MPLS signalling protocol
|
|
is crldp(3) this value should be equal to the value
|
|
signalled in the LSP ID. Reference to MPLS-TE-STD-MIB."
|
|
::= { hwTunnelTeVsiEntry 1 }
|
|
|
|
hwTunnelTeVsiName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..47))
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The name of VSI that the TE interface bind."
|
|
::= { hwTunnelTeVsiEntry 2 }
|
|
|
|
|
|
hwTunnelTeVsiCir OBJECT-TYPE
|
|
SYNTAX Integer32 (100..10000000)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The Committed Information Rate of the VSI."
|
|
::= { hwTunnelTeVsiEntry 3}
|
|
|
|
|
|
hwTunnelTeVsiPir OBJECT-TYPE
|
|
SYNTAX Integer32 (100..10000000)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The Peak Information Rate of the VSI."
|
|
::= { hwTunnelTeVsiEntry 4 }
|
|
|
|
|
|
hwTunnelTeVsiFlowQueue OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..31))
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Name of flow-queue template."
|
|
::= { hwTunnelTeVsiEntry 5 }
|
|
|
|
|
|
hwTunnelTeVllTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwTunnelTeVllEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The table describes the VLL binding of tunnel."
|
|
::= { hwTunnelTeMibObject 3 }
|
|
|
|
|
|
hwTunnelTeVllEntry OBJECT-TYPE
|
|
SYNTAX HwTunnelTeVllEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The VLL binding configuration of tunnel interface."
|
|
INDEX { hwTunnelTeVllIndex,hwTunnelTeVllInterfaceName }
|
|
::= {hwTunnelTeVllTable 1}
|
|
|
|
HwTunnelTeVllEntry ::=
|
|
SEQUENCE {
|
|
hwTunnelTeVllIndex
|
|
InterfaceIndex,
|
|
hwTunnelTeVllInterfaceName
|
|
OCTET STRING,
|
|
hwTunnelTeVllCir
|
|
Integer32,
|
|
hwTunnelTeVllPir
|
|
Integer32,
|
|
hwTunnelTeVllFlowQueue
|
|
OCTET STRING
|
|
}
|
|
|
|
hwTunnelTeVllIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Uniquely identifies a set of tunnel instances
|
|
between a pair of ingress and egress LSRs.
|
|
Managers should obtain new values for row
|
|
creation in this table by reading mplsTunnelIndexNext.
|
|
When the MPLS signalling protocol is rsvp(2),this value
|
|
should be equal to the value signalled in the tunnel ID
|
|
of the session object. When the MPLS signalling protocol
|
|
is crldp(3) this value should be equal to the value
|
|
signalled in the LSP ID. Reference to MPLS-TE-STD-MIB."
|
|
::= { hwTunnelTeVllEntry 1 }
|
|
|
|
hwTunnelTeVllInterfaceName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..47))
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The interface name of VLL binding."
|
|
::= { hwTunnelTeVllEntry 2 }
|
|
|
|
|
|
hwTunnelTeVllCir OBJECT-TYPE
|
|
SYNTAX Integer32 (100..10000000)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The Committed Information Rate of the VLL."
|
|
::= { hwTunnelTeVllEntry 3}
|
|
|
|
|
|
hwTunnelTeVllPir OBJECT-TYPE
|
|
SYNTAX Integer32 (100..10000000)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The Peak Information Rate of the VLL."
|
|
::= { hwTunnelTeVllEntry 4 }
|
|
|
|
|
|
hwTunnelTeVllFlowQueue OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..31))
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Name of flow-queue template."
|
|
::= { hwTunnelTeVllEntry 5 }
|
|
|
|
hwTunnelTeL3vpnTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwTunnelTeL3vpnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The table describes the L3VPN binding of tunnel."
|
|
::= { hwTunnelTeMibObject 4 }
|
|
|
|
|
|
hwTunnelTeL3vpnEntry OBJECT-TYPE
|
|
SYNTAX HwTunnelTeL3vpnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The L3VPN binding configuration of tunnel interface."
|
|
INDEX { hwTunnelTeL3vpnIndex,hwTunnelTeL3vpnName }
|
|
::= {hwTunnelTeL3vpnTable 1}
|
|
|
|
HwTunnelTeL3vpnEntry ::=
|
|
SEQUENCE {
|
|
hwTunnelTeL3vpnIndex
|
|
InterfaceIndex,
|
|
hwTunnelTeL3vpnName
|
|
OCTET STRING,
|
|
hwTunnelTeL3vpnCir
|
|
Integer32,
|
|
hwTunnelTeL3vpnPir
|
|
Integer32,
|
|
hwTunnelTeL3vpnFlowQueue
|
|
OCTET STRING
|
|
}
|
|
|
|
hwTunnelTeL3vpnIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Uniquely identifies a set of tunnel instances
|
|
between a pair of ingress and egress LSRs.
|
|
Managers should obtain new values for row
|
|
creation in this table by reading mplsTunnelIndexNext.
|
|
When the MPLS signalling protocol is rsvp(2),this value
|
|
should be equal to the value signalled in the tunnel ID
|
|
of the session object. When the MPLS signalling protocol
|
|
is crldp(3) this value should be equal to the value
|
|
signalled in the LSP ID. Reference to MPLS-TE-STD-MIB."
|
|
::= { hwTunnelTeL3vpnEntry 1 }
|
|
|
|
|
|
hwTunnelTeL3vpnName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..47))
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The name of VPN instance that the TE interface bind."
|
|
::= { hwTunnelTeL3vpnEntry 2 }
|
|
|
|
|
|
hwTunnelTeL3vpnCir OBJECT-TYPE
|
|
SYNTAX Integer32 (100..10000000)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The Committed Information Rate of the L3VPN."
|
|
::= { hwTunnelTeL3vpnEntry 3}
|
|
|
|
|
|
hwTunnelTeL3vpnPir OBJECT-TYPE
|
|
SYNTAX Integer32 (100..10000000)
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The Peak Information Rate of the L3VPN."
|
|
::= { hwTunnelTeL3vpnEntry 4 }
|
|
|
|
|
|
hwTunnelTeL3vpnFlowQueue OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..31))
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Name of flow-queue template."
|
|
::= { hwTunnelTeL3vpnEntry 5 }
|
|
|
|
hwTunnelTeStatisticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwTunnelTeStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table describes the up/down state transition counts of the TE tunnel interface."
|
|
::= { hwTunnelTeMibObject 5 }
|
|
|
|
hwTunnelTeStatisticsEntry OBJECT-TYPE
|
|
SYNTAX HwTunnelTeStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The up/down state transition counts of TE tunnel interface.
|
|
The index of the table is hwTunnelTeStatisticsIfIndex."
|
|
INDEX { hwTunnelTeStatisticsIfIndex}
|
|
::= {hwTunnelTeStatisticsTable 1}
|
|
|
|
HwTunnelTeStatisticsEntry ::=
|
|
SEQUENCE {
|
|
hwTunnelTeStatisticsIfIndex InterfaceIndex,
|
|
hwTunnelTeUpDownStatistics Unsigned32,
|
|
hwTunnTeCounterDiscontinuityTime TimeStamp
|
|
}
|
|
|
|
hwTunnelTeStatisticsIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uniquely identifies a set of tunnel instances
|
|
between a pair of ingress and egress LSRs.
|
|
Managers should obtain new values for row
|
|
creation in this table by reading mplsTunnelIndexNext."
|
|
::= { hwTunnelTeStatisticsEntry 1 }
|
|
|
|
hwTunnelTeUpDownStatistics OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the up/down transition counts of the TE tunnel interface."
|
|
::= { hwTunnelTeStatisticsEntry 2 }
|
|
|
|
hwTunnTeCounterDiscontinuityTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime on the most recent occasion at which this interface's up/down transition counters suffered a discontinuity."
|
|
::= { hwTunnelTeStatisticsEntry 3 }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
hwCtTemplateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwCtTemplateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table describes the CT template configuration on the device."
|
|
::= { hwTunnelTeMibObject 6 }
|
|
|
|
hwCtTemplateEntry OBJECT-TYPE
|
|
SYNTAX HwCtTemplateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CT template configuration on the device.
|
|
The index of the table is hwCtTemplateIndex."
|
|
INDEX { hwCtTemplateIndex }
|
|
::= {hwCtTemplateTable 1}
|
|
|
|
HwCtTemplateEntry ::=
|
|
SEQUENCE {
|
|
hwCtTemplateIndex Integer32,
|
|
hwCtTemplateName OCTET STRING,
|
|
hwCtTemplateCt0 Unsigned32,
|
|
hwCtTemplateCt1 Unsigned32,
|
|
hwCtTemplateCt2 Unsigned32,
|
|
hwCtTemplateCt3 Unsigned32,
|
|
hwCtTemplateCt4 Unsigned32,
|
|
hwCtTemplateCt5 Unsigned32,
|
|
hwCtTemplateCt6 Unsigned32,
|
|
hwCtTemplateCt7 Unsigned32,
|
|
hwCtTemplateCommit INTEGER,
|
|
hwCtTemplateRowStatus RowStatus
|
|
}
|
|
|
|
hwCtTemplateIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4096)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It uniquely identifies a set of CT templates.
|
|
Managers should obtain new values for row
|
|
creation in this table by reading hwCtTemplateIndex."
|
|
::= { hwCtTemplateEntry 1 }
|
|
|
|
hwCtTemplateName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..19))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CT template name."
|
|
::= { hwCtTemplateEntry 2 }
|
|
|
|
hwCtTemplateCt0 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CT0 bandwidth of the CT template."
|
|
::= { hwCtTemplateEntry 3 }
|
|
|
|
hwCtTemplateCt1 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..32000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CT1 bandwidth of the CT template."
|
|
::= { hwCtTemplateEntry 4 }
|
|
|
|
hwCtTemplateCt2 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..32000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CT2 bandwidth of the CT template."
|
|
::= { hwCtTemplateEntry 5 }
|
|
|
|
hwCtTemplateCt3 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..32000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CT3 bandwidth of the CT template."
|
|
::= { hwCtTemplateEntry 6 }
|
|
|
|
hwCtTemplateCt4 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..32000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CT4 bandwidth of the CT template."
|
|
::= { hwCtTemplateEntry 7 }
|
|
|
|
hwCtTemplateCt5 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..32000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CT5 bandwidth of the CT template."
|
|
::= { hwCtTemplateEntry 8 }
|
|
|
|
hwCtTemplateCt6 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..32000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CT6 bandwidth of the CT template."
|
|
::= { hwCtTemplateEntry 9 }
|
|
|
|
hwCtTemplateCt7 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..32000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CT7 bandwidth of the CT template."
|
|
::= { hwCtTemplateEntry 10 }
|
|
|
|
hwCtTemplateCommit OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
notCommit(1),
|
|
commit(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The commit flag of the CT template,1 indicates commit,0 indicates not commit."
|
|
::= { hwCtTemplateEntry 11 }
|
|
|
|
hwCtTemplateRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create and delete rows in the CT template."
|
|
::= { hwCtTemplateEntry 12 }
|
|
|
|
|
|
----------------------
|
|
|
|
|
|
|
|
|
|
hwCtConfigTunnelCtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwCtConfigTunnelCtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table describes the CT configuration in the TE tunnel interface."
|
|
::= { hwTunnelTeMibObject 7 }
|
|
|
|
hwCtConfigTunnelCtEntry OBJECT-TYPE
|
|
SYNTAX HwCtConfigTunnelCtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table describes the CT configuration in the TE tunnel interface.
|
|
The index of the table is hwCtConfigTunnelCtIfIndex."
|
|
INDEX { hwCtConfigTunnelCtIfIndex}
|
|
::= {hwCtConfigTunnelCtTable 1}
|
|
|
|
HwCtConfigTunnelCtEntry ::=
|
|
SEQUENCE {
|
|
hwCtConfigTunnelCtIfIndex InterfaceIndex,
|
|
hwCtConfigTunnelName OCTET STRING,
|
|
hwCtConfigTunnelCommit INTEGER,
|
|
hwCtConfigTemplateName OCTET STRING,
|
|
hwCtConfigTunnelCt0Band Unsigned32,
|
|
hwCtConfigTunnelCt1Band Unsigned32,
|
|
hwCtConfigTunnelCt2Band Unsigned32,
|
|
hwCtConfigTunnelCt3Band Unsigned32,
|
|
hwCtConfigTunnelCt4Band Unsigned32,
|
|
hwCtConfigTunnelCt5Band Unsigned32,
|
|
hwCtConfigTunnelCt6Band Unsigned32,
|
|
hwCtConfigTunnelCt7Band Unsigned32
|
|
}
|
|
|
|
hwCtConfigTunnelCtIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uniquely identifies a set of tunnels
|
|
between a pair of ingress and egress LSRs.
|
|
Managers should obtain new values for row
|
|
creation in this table by reading mplsTunnelIndexNext.
|
|
When the MPLS signalling protocol is rsvp(2),this value
|
|
should be equal to the value signalled in the tunnel ID
|
|
of the session object. When the MPLS signalling protocol
|
|
is crldp(3) this value should be equal to the value
|
|
signalled in the LSP ID. Reference to MPLS-TE-STD-MIB."
|
|
::= { hwCtConfigTunnelCtEntry 1 }
|
|
|
|
hwCtConfigTunnelName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the TE tunnel interface."
|
|
::= { hwCtConfigTunnelCtEntry 2 }
|
|
|
|
hwCtConfigTunnelCommit OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
notCommit(1),
|
|
commit(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The commit flag of the TE tunnel interface,1 indicates commit,0 indicates not commit."
|
|
::= { hwCtConfigTunnelCtEntry 3 }
|
|
|
|
|
|
hwCtConfigTemplateName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..19))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CT template name."
|
|
::= { hwCtConfigTunnelCtEntry 4 }
|
|
|
|
|
|
hwCtConfigTunnelCt0Band OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..32000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CT0 bandwidth value of the TE tunnel interface."
|
|
::= { hwCtConfigTunnelCtEntry 5 }
|
|
|
|
hwCtConfigTunnelCt1Band OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..32000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CT1 bandwidth value of the TE tunnel interface."
|
|
::= { hwCtConfigTunnelCtEntry 6 }
|
|
|
|
hwCtConfigTunnelCt2Band OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..32000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CT2 bandwidth value of the TE tunnel interface."
|
|
::= { hwCtConfigTunnelCtEntry 7 }
|
|
|
|
hwCtConfigTunnelCt3Band OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..32000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CT3 bandwidth value of the TE tunnel interface."
|
|
::= { hwCtConfigTunnelCtEntry 8 }
|
|
|
|
hwCtConfigTunnelCt4Band OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..32000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CT4 bandwidth value of the TE tunnel interface."
|
|
::= { hwCtConfigTunnelCtEntry 9 }
|
|
|
|
hwCtConfigTunnelCt5Band OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..32000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CT5 bandwidth value of the TE tunnel interface."
|
|
::= { hwCtConfigTunnelCtEntry 10 }
|
|
|
|
hwCtConfigTunnelCt6Band OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..32000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CT6 bandwidth value of the TE tunnel interface."
|
|
::= { hwCtConfigTunnelCtEntry 11 }
|
|
|
|
hwCtConfigTunnelCt7Band OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..32000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CT7 bandwidth value of the TE tunnel interface."
|
|
::= { hwCtConfigTunnelCtEntry 12 }
|
|
|
|
|
|
|
|
--------------
|
|
|
|
|
|
|
|
hwCtStatisticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwCtStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table describes flow statistics of the TE tunnel interface VPN configuration."
|
|
::= { hwTunnelTeMibObject 8 }
|
|
|
|
hwCtStatisticsEntry OBJECT-TYPE
|
|
SYNTAX HwCtStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table describes the statistics in the TE tunnel interface with CT configuration.
|
|
The index of the table is hwCtStatisticsIfIndex."
|
|
INDEX { hwCtStatisticsIfIndex }
|
|
::= {hwCtStatisticsTable 1}
|
|
|
|
HwCtStatisticsEntry ::=
|
|
SEQUENCE {
|
|
hwCtStatisticsIfIndex InterfaceIndex,
|
|
hwCtStatisticsTunnelName OCTET STRING,
|
|
hwCtStatisticsCt0OutByteRate Counter64,
|
|
hwCtStatisticsCt0OutPktRate Counter64,
|
|
hwCtStatisticsCt0OutPkt Counter64,
|
|
hwCtStatisticsCt0OutPktByte Counter64,
|
|
hwCtStatisticsCt0OutErrorPkt Counter64,
|
|
hwCtStatisticsCt1OutByteRate Counter64,
|
|
hwCtStatisticsCt1OutPktRate Counter64,
|
|
hwCtStatisticsCt1OutPkt Counter64,
|
|
hwCtStatisticsCt1OutPktByte Counter64,
|
|
hwCtStatisticsCt1OutErrorPkt Counter64,
|
|
hwCtStatisticsCt2OutByteRate Counter64,
|
|
hwCtStatisticsCt2OutPktRate Counter64,
|
|
hwCtStatisticsCt2OutPkt Counter64,
|
|
hwCtStatisticsCt2OutPktByte Counter64,
|
|
hwCtStatisticsCt2OutErrorPkt Counter64,
|
|
hwCtStatisticsCt3OutByteRate Counter64,
|
|
hwCtStatisticsCt3OutPktRate Counter64,
|
|
hwCtStatisticsCt3OutPkt Counter64,
|
|
hwCtStatisticsCt3OutPktByte Counter64,
|
|
hwCtStatisticsCt3OutErrorPkt Counter64,
|
|
hwCtStatisticsCt4OutByteRate Counter64,
|
|
hwCtStatisticsCt4OutPktRate Counter64,
|
|
hwCtStatisticsCt4OutPkt Counter64,
|
|
hwCtStatisticsCt4OutPktByte Counter64,
|
|
hwCtStatisticsCt4OutErrorPkt Counter64,
|
|
hwCtStatisticsCt5OutByteRate Counter64,
|
|
hwCtStatisticsCt5OutPktRate Counter64,
|
|
hwCtStatisticsCt5OutPkt Counter64,
|
|
hwCtStatisticsCt5OutPktByte Counter64,
|
|
hwCtStatisticsCt5OutErrorPkt Counter64,
|
|
hwCtStatisticsCt6OutByteRate Counter64,
|
|
hwCtStatisticsCt6OutPktRate Counter64,
|
|
hwCtStatisticsCt6OutPkt Counter64,
|
|
hwCtStatisticsCt6OutPktByte Counter64,
|
|
hwCtStatisticsCt6OutErrorPkt Counter64,
|
|
hwCtStatisticsCt7OutByteRate Counter64,
|
|
hwCtStatisticsCt7OutPktRate Counter64,
|
|
hwCtStatisticsCt7OutPkt Counter64,
|
|
hwCtStatisticsCt7OutPktByte Counter64,
|
|
hwCtStatisticsCt7OutErrorPkt Counter64
|
|
}
|
|
|
|
hwCtStatisticsIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uniquely identifies a set of tunnels
|
|
between a pair of ingress and egress LSRs.
|
|
Managers should obtain new values for row
|
|
creation in this table by reading mplsTunnelIndexNext.
|
|
When the MPLS signalling protocol is rsvp(2),this value
|
|
should be equal to the value signalled in the tunnel ID
|
|
of the session object. When the MPLS signalling protocol
|
|
is crldp(3) this value should be equal to the value
|
|
signalled in the LSP ID. Reference to MPLS-TE-STD-MIB."
|
|
::= { hwCtStatisticsEntry 1 }
|
|
|
|
hwCtStatisticsTunnelName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the TE tunnel interface."
|
|
::= { hwCtStatisticsEntry 2 }
|
|
|
|
hwCtStatisticsCt0OutByteRate OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the rate in bytes/sec out from the CT0 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 3 }
|
|
|
|
|
|
|
|
hwCtStatisticsCt0OutPktRate OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the rate in packets/sec out from the CT0 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 4 }
|
|
|
|
hwCtStatisticsCt0OutPkt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the out packets from the CT0 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 5 }
|
|
|
|
hwCtStatisticsCt0OutPktByte OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the out bytes from the CT0 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 6 }
|
|
|
|
hwCtStatisticsCt0OutErrorPkt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the error packets from the CT0 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 7 }
|
|
|
|
hwCtStatisticsCt1OutByteRate OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the rate in bytes/sec out from CT1 the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 8 }
|
|
|
|
hwCtStatisticsCt1OutPktRate OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the rate in packets/sec out from the CT0 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 9 }
|
|
|
|
|
|
|
|
hwCtStatisticsCt1OutPkt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the out packets from the CT1 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 10 }
|
|
hwCtStatisticsCt1OutPktByte OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the out packet bytes from the CT1 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 11 }
|
|
|
|
hwCtStatisticsCt1OutErrorPkt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the error packets from the CT1 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 12 }
|
|
|
|
|
|
hwCtStatisticsCt2OutByteRate OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the rate in bytes/sec out from the CT2 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 13 }
|
|
|
|
hwCtStatisticsCt2OutPktRate OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the rate in packets/sec out from the CT2 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 14 }
|
|
|
|
|
|
|
|
hwCtStatisticsCt2OutPkt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the out packets from the CT2 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 15 }
|
|
hwCtStatisticsCt2OutPktByte OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the out packet bytes from the CT2 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 16 }
|
|
|
|
hwCtStatisticsCt2OutErrorPkt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the error packets from the CT2 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 17 }
|
|
|
|
|
|
hwCtStatisticsCt3OutByteRate OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CT3 out in bytes/sec out of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 18 }
|
|
|
|
hwCtStatisticsCt3OutPktRate OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the rate in packets/sec out from the CT0 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 19 }
|
|
|
|
|
|
|
|
|
|
hwCtStatisticsCt3OutPkt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the out packets from the CT3 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 20 }
|
|
hwCtStatisticsCt3OutPktByte OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the out packet bytes from the CT3 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 21 }
|
|
|
|
hwCtStatisticsCt3OutErrorPkt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the error packets from the CT0 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 22 }
|
|
|
|
|
|
hwCtStatisticsCt4OutByteRate OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CT4 out in bytes/sec out of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 23 }
|
|
|
|
|
|
hwCtStatisticsCt4OutPktRate OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the rate in packets/sec out from the CT4 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 24 }
|
|
|
|
|
|
hwCtStatisticsCt4OutPkt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the out packets from the CT4 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 25 }
|
|
|
|
hwCtStatisticsCt4OutPktByte OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the out packet bytes from the CT4 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 26 }
|
|
|
|
hwCtStatisticsCt4OutErrorPkt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the error packets from the CT4 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 27 }
|
|
|
|
|
|
hwCtStatisticsCt5OutByteRate OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CT5 out in bytes/sec out of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 28 }
|
|
|
|
|
|
hwCtStatisticsCt5OutPktRate OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the rate in packets/sec out from the CT5 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 29 }
|
|
|
|
|
|
hwCtStatisticsCt5OutPkt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the out packets from the CT5 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 30 }
|
|
hwCtStatisticsCt5OutPktByte OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the out packet bytes from the CT5 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 31 }
|
|
|
|
hwCtStatisticsCt5OutErrorPkt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the error packets from the CT5 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 32 }
|
|
|
|
|
|
hwCtStatisticsCt6OutByteRate OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CT6 out in bytes/sec out of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 33 }
|
|
|
|
|
|
hwCtStatisticsCt6OutPktRate OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the rate in packets/sec out from the CT6 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 34 }
|
|
|
|
|
|
hwCtStatisticsCt6OutPkt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the out packets from the CT6 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 35 }
|
|
hwCtStatisticsCt6OutPktByte OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the out packet bytes from the CT6 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 36 }
|
|
|
|
hwCtStatisticsCt6OutErrorPkt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the error packets from the CT6 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 37 }
|
|
|
|
|
|
hwCtStatisticsCt7OutByteRate OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CT7 out in bytes/sec out of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 38 }
|
|
|
|
|
|
hwCtStatisticsCt7OutPktRate OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the rate in packets/sec out from the CT7 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 39 }
|
|
|
|
|
|
hwCtStatisticsCt7OutPkt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the out packets from the CT7 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 40 }
|
|
hwCtStatisticsCt7OutPktByte OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the out packet bytes from the CT7 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 41 }
|
|
|
|
hwCtStatisticsCt7OutErrorPkt OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It counts the error packets from the CT7 of the TE tunnel interface with VPN configuration."
|
|
::= { hwCtStatisticsEntry 42 }
|
|
|
|
|
|
|
|
|
|
|
|
-- Node definitions
|
|
--
|
|
|
|
|
|
|
|
hwCtFlowTemplateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwCtFlowTemplateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table describes max 8 of the CT-FLOW-Mapping template configuration on the device.
|
|
"
|
|
::= { hwTunnelTeMibObject 9}
|
|
|
|
hwCtFlowTemplateEntry OBJECT-TYPE
|
|
SYNTAX HwCtFlowTemplateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table describes the CT-FLOW-Mapping template configuration on the device.
|
|
"
|
|
INDEX { hwCtFlowTemplateID }
|
|
::= { hwCtFlowTemplateTable 1}
|
|
|
|
HwCtFlowTemplateEntry ::=
|
|
SEQUENCE
|
|
{
|
|
hwCtFlowTemplateID Integer32,
|
|
|
|
hwCtFlowTemplateName OCTET STRING,
|
|
|
|
hwCt0Cos INTEGER,
|
|
|
|
hwCt0Scheduler INTEGER,
|
|
|
|
hwCt0Valid INTEGER ,
|
|
|
|
hwCt1Cos INTEGER,
|
|
|
|
hwCt1Scheduler INTEGER,
|
|
|
|
hwCt1Valid INTEGER ,
|
|
|
|
hwCt2Cos INTEGER,
|
|
|
|
hwCt2Scheduler INTEGER,
|
|
|
|
hwCt2Valid INTEGER ,
|
|
|
|
hwCt3Cos INTEGER,
|
|
|
|
hwCt3Scheduler INTEGER,
|
|
|
|
hwCt3Valid INTEGER ,
|
|
|
|
hwCt4Cos INTEGER,
|
|
|
|
hwCt4Scheduler INTEGER,
|
|
|
|
hwCt4Valid INTEGER ,
|
|
|
|
hwCt5Cos INTEGER,
|
|
|
|
hwCt5Scheduler INTEGER,
|
|
|
|
hwCt5Valid INTEGER ,
|
|
|
|
hwCt6Cos INTEGER,
|
|
|
|
hwCt6Scheduler INTEGER,
|
|
|
|
hwCt6Valid INTEGER ,
|
|
|
|
hwCt7Cos INTEGER,
|
|
|
|
hwCt7Scheduler INTEGER,
|
|
|
|
hwCt7Valid INTEGER ,
|
|
|
|
hwCtFlowTemplateCommit INTEGER,
|
|
|
|
hwCtFlowTemplateRowStatus RowStatus
|
|
|
|
}
|
|
|
|
hwCtFlowTemplateID OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of CT-FLOW templat."
|
|
::= {hwCtFlowTemplateEntry 1}
|
|
|
|
hwCtFlowTemplateName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..60))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of CT-FLOW template."
|
|
::= { hwCtFlowTemplateEntry 11 }
|
|
|
|
hwCt0Cos OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
be(1),
|
|
af1(2),
|
|
af2(3),
|
|
af3(4),
|
|
af4(5),
|
|
ef(6),
|
|
cs6(7),
|
|
cs7(8)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'."
|
|
::= { hwCtFlowTemplateEntry 12 }
|
|
|
|
hwCt0Scheduler OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pq(1),
|
|
wfq(2),
|
|
lpq(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Scheduler name."
|
|
::= { hwCtFlowTemplateEntry 13 }
|
|
|
|
hwCt0Valid OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
valid(1),
|
|
invalid(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of CT-FLOW templat row."
|
|
::= { hwCtFlowTemplateEntry 14 }
|
|
hwCt1Cos OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
be(1),
|
|
af1(2),
|
|
af2(3),
|
|
af3(4),
|
|
af4(5),
|
|
ef(6),
|
|
cs6(7),
|
|
cs7(8)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'."
|
|
::= { hwCtFlowTemplateEntry 15 }
|
|
|
|
hwCt1Scheduler OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pq(1),
|
|
wfq(2),
|
|
lpq(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Scheduler name."
|
|
::= { hwCtFlowTemplateEntry 16 }
|
|
|
|
hwCt1Valid OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
valid(1),
|
|
invalid(2)
|
|
}
|
|
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of CT-FLOW templat row."
|
|
::= { hwCtFlowTemplateEntry 17 }
|
|
hwCt2Cos OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
be(1),
|
|
af1(2),
|
|
af2(3),
|
|
af3(4),
|
|
af4(5),
|
|
ef(6),
|
|
cs6(7),
|
|
cs7(8)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'."
|
|
::= { hwCtFlowTemplateEntry 18 }
|
|
|
|
hwCt2Scheduler OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pq(1),
|
|
wfq(2),
|
|
lpq(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Scheduler name."
|
|
::= { hwCtFlowTemplateEntry 19 }
|
|
|
|
hwCt2Valid OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
valid(1),
|
|
invalid(2)
|
|
}
|
|
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of CT-FLOW templat row."
|
|
::= { hwCtFlowTemplateEntry 20 }
|
|
hwCt3Cos OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
be(1),
|
|
af1(2),
|
|
af2(3),
|
|
af3(4),
|
|
af4(5),
|
|
ef(6),
|
|
cs6(7),
|
|
cs7(8)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'."
|
|
::= { hwCtFlowTemplateEntry 21 }
|
|
|
|
hwCt3Scheduler OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pq(1),
|
|
wfq(2),
|
|
lpq(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Scheduler name."
|
|
::= { hwCtFlowTemplateEntry 22 }
|
|
|
|
hwCt3Valid OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
valid(1),
|
|
invalid(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of CT-FLOW templat row."
|
|
::= { hwCtFlowTemplateEntry 23 }
|
|
hwCt4Cos OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
be(1),
|
|
af1(2),
|
|
af2(3),
|
|
af3(4),
|
|
af4(5),
|
|
ef(6),
|
|
cs6(7),
|
|
cs7(8)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'."
|
|
::= { hwCtFlowTemplateEntry 24 }
|
|
|
|
hwCt4Scheduler OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pq(1),
|
|
wfq(2),
|
|
lpq(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Scheduler name."
|
|
::= { hwCtFlowTemplateEntry 25 }
|
|
|
|
hwCt4Valid OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
valid(1),
|
|
invalid(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of CT-FLOW templat row."
|
|
::= { hwCtFlowTemplateEntry 26 }
|
|
hwCt5Cos OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
be(1),
|
|
af1(2),
|
|
af2(3),
|
|
af3(4),
|
|
af4(5),
|
|
ef(6),
|
|
cs6(7),
|
|
cs7(8)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'."
|
|
::= { hwCtFlowTemplateEntry 27 }
|
|
|
|
hwCt5Scheduler OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pq(1),
|
|
wfq(2),
|
|
lpq(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Scheduler name."
|
|
::= { hwCtFlowTemplateEntry 28 }
|
|
|
|
hwCt5Valid OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
valid(1),
|
|
invalid(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of CT-FLOW templat row."
|
|
::= { hwCtFlowTemplateEntry 29 }
|
|
hwCt6Cos OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
be(1),
|
|
af1(2),
|
|
af2(3),
|
|
af3(4),
|
|
af4(5),
|
|
ef(6),
|
|
cs6(7),
|
|
cs7(8)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'."
|
|
::= { hwCtFlowTemplateEntry 30 }
|
|
|
|
hwCt6Scheduler OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pq(1),
|
|
wfq(2),
|
|
lpq(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Scheduler name."
|
|
::= { hwCtFlowTemplateEntry 31 }
|
|
|
|
hwCt6Valid OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
valid(1),
|
|
invalid(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of CT-FLOW templat row."
|
|
::= { hwCtFlowTemplateEntry 32 }
|
|
hwCt7Cos OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
be(1),
|
|
af1(2),
|
|
af2(3),
|
|
af3(4),
|
|
af4(5),
|
|
ef(6),
|
|
cs6(7),
|
|
cs7(8)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'."
|
|
::= { hwCtFlowTemplateEntry 33 }
|
|
|
|
hwCt7Scheduler OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pq(1),
|
|
wfq(2),
|
|
lpq(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Scheduler name."
|
|
::= { hwCtFlowTemplateEntry 34 }
|
|
|
|
hwCt7Valid OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
valid(1),
|
|
invalid(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of CT-FLOW templat row."
|
|
::= { hwCtFlowTemplateEntry 35 }
|
|
|
|
hwCtFlowTemplateCommit OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
commit(1),
|
|
nocommit(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of CT-FLOW templat commit."
|
|
::= { hwCtFlowTemplateEntry 36 }
|
|
|
|
hwCtFlowTemplateRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of CT-FLOW templat."
|
|
::= { hwCtFlowTemplateEntry 51 }
|
|
|
|
|
|
|
|
hwDsteInterfaceCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwDsteInterfaceCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DS-TE configuration at interface."
|
|
::= { hwTunnelTeMibObject 10}
|
|
|
|
hwDsteInterfaceCfgEntry OBJECT-TYPE
|
|
SYNTAX HwDsteInterfaceCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DS-TE configuration at interface."
|
|
INDEX { hwDsteIfIndex }
|
|
::= { hwDsteInterfaceCfgTable 1}
|
|
|
|
HwDsteInterfaceCfgEntry ::=
|
|
SEQUENCE
|
|
{
|
|
hwDsteIfIndex InterfaceIndex ,
|
|
|
|
hwAppliedCtFlowTemplateName OCTET STRING,
|
|
|
|
hwCtBandWidthShareCfg INTEGER
|
|
}
|
|
|
|
hwDsteIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value, greater than zero, for eachinterface.
|
|
It is recommended that values are assigned contiguously starting from 1.
|
|
The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization."
|
|
::= {hwDsteInterfaceCfgEntry 1}
|
|
|
|
hwAppliedCtFlowTemplateName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..60))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of CT-FLOW template."
|
|
::= { hwDsteInterfaceCfgEntry 11 }
|
|
|
|
hwCtBandWidthShareCfg OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
share(1),
|
|
unshare(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Value of Ct BandWidth configuration for DS-TE.
|
|
That must be in 'Share,UnShare'."
|
|
::= { hwDsteInterfaceCfgEntry 12 }
|
|
|
|
hwTunnelTeConformance OBJECT IDENTIFIER ::= { hwTunnelTeMib 3 }
|
|
|
|
hwTunnelTeGroups OBJECT IDENTIFIER ::= { hwTunnelTeConformance 3 }
|
|
|
|
hwTunnelTeCompliances OBJECT IDENTIFIER ::= {hwTunnelTeConformance 1}
|
|
|
|
|
|
hwTunnelDiffServGroup OBJECT-GROUP
|
|
OBJECTS { hwTunnelDiffServMode, hwTunnelDiffServServiceClass,hwTunnelDiffServColor,hwTunnelTeFlowQueue}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the different service mode of tunnel."
|
|
::= { hwTunnelTeGroups 1 }
|
|
|
|
hwTunnelTeVsiGroup OBJECT-GROUP
|
|
OBJECTS { hwTunnelTeVsiCir, hwTunnelTeVsiPir,hwTunnelTeVsiFlowQueue}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the VSI binding of tunnel."
|
|
::= { hwTunnelTeGroups 2 }
|
|
|
|
hwTunnelTeVllGroup OBJECT-GROUP
|
|
OBJECTS { hwTunnelTeVllCir, hwTunnelTeVllPir,hwTunnelTeVllFlowQueue}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the VLL binding of tunnel."
|
|
::= { hwTunnelTeGroups 3 }
|
|
|
|
hwTunnelTeL3vpnGroup OBJECT-GROUP
|
|
OBJECTS { hwTunnelTeL3vpnCir, hwTunnelTeL3vpnPir,hwTunnelTeL3vpnFlowQueue}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the L3VPN binding of tunnel."
|
|
::= { hwTunnelTeGroups 4 }
|
|
hwTunnelTeStatisticsGroup OBJECT-GROUP
|
|
OBJECTS { hwTunnelTeUpDownStatistics,hwTunnTeCounterDiscontinuityTime}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the up/down count of the TE tunnel."
|
|
::= { hwTunnelTeGroups 5 }
|
|
|
|
hwCtTemplateGroup OBJECT-GROUP
|
|
OBJECTS { hwCtTemplateName ,
|
|
hwCtTemplateCt0 ,
|
|
hwCtTemplateCt1 ,
|
|
hwCtTemplateCt2 ,
|
|
hwCtTemplateCt3 ,
|
|
hwCtTemplateCt4 ,
|
|
hwCtTemplateCt5 ,
|
|
hwCtTemplateCt6 ,
|
|
hwCtTemplateCt7,
|
|
hwCtTemplateCommit,
|
|
hwCtTemplateRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes CT template."
|
|
::= { hwTunnelTeGroups 6 }
|
|
|
|
hwCtConfigCtGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hwCtConfigTunnelName ,
|
|
hwCtConfigTunnelCommit ,
|
|
hwCtConfigTemplateName ,
|
|
hwCtConfigTunnelCt0Band ,
|
|
hwCtConfigTunnelCt1Band ,
|
|
hwCtConfigTunnelCt2Band ,
|
|
hwCtConfigTunnelCt3Band ,
|
|
hwCtConfigTunnelCt4Band ,
|
|
hwCtConfigTunnelCt5Band ,
|
|
hwCtConfigTunnelCt6Band ,
|
|
hwCtConfigTunnelCt7Band}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the CT configuration of the TE tunnel interface."
|
|
::= { hwTunnelTeGroups 7 }
|
|
|
|
hwCtStatisticsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hwCtStatisticsTunnelName ,
|
|
hwCtStatisticsCt0OutByteRate ,
|
|
hwCtStatisticsCt0OutPktRate ,
|
|
hwCtStatisticsCt0OutPkt ,
|
|
hwCtStatisticsCt0OutPktByte ,
|
|
hwCtStatisticsCt0OutErrorPkt ,
|
|
hwCtStatisticsCt1OutByteRate ,
|
|
hwCtStatisticsCt1OutPktRate ,
|
|
hwCtStatisticsCt1OutPkt ,
|
|
hwCtStatisticsCt1OutPktByte ,
|
|
hwCtStatisticsCt1OutErrorPkt ,
|
|
hwCtStatisticsCt2OutByteRate ,
|
|
hwCtStatisticsCt2OutPktRate ,
|
|
hwCtStatisticsCt2OutPkt ,
|
|
hwCtStatisticsCt2OutPktByte ,
|
|
hwCtStatisticsCt2OutErrorPkt ,
|
|
hwCtStatisticsCt3OutByteRate ,
|
|
hwCtStatisticsCt3OutPktRate ,
|
|
hwCtStatisticsCt3OutPkt ,
|
|
hwCtStatisticsCt3OutPktByte ,
|
|
hwCtStatisticsCt3OutErrorPkt ,
|
|
hwCtStatisticsCt4OutByteRate ,
|
|
hwCtStatisticsCt4OutPktRate ,
|
|
hwCtStatisticsCt4OutPkt ,
|
|
hwCtStatisticsCt4OutPktByte ,
|
|
hwCtStatisticsCt4OutErrorPkt ,
|
|
hwCtStatisticsCt5OutByteRate ,
|
|
hwCtStatisticsCt5OutPktRate ,
|
|
hwCtStatisticsCt5OutPkt ,
|
|
hwCtStatisticsCt5OutPktByte ,
|
|
hwCtStatisticsCt5OutErrorPkt ,
|
|
hwCtStatisticsCt6OutByteRate ,
|
|
hwCtStatisticsCt6OutPktRate ,
|
|
hwCtStatisticsCt6OutPkt ,
|
|
hwCtStatisticsCt6OutPktByte ,
|
|
hwCtStatisticsCt6OutErrorPkt ,
|
|
hwCtStatisticsCt7OutByteRate ,
|
|
hwCtStatisticsCt7OutPktRate ,
|
|
hwCtStatisticsCt7OutPkt ,
|
|
hwCtStatisticsCt7OutPktByte ,
|
|
hwCtStatisticsCt7OutErrorPkt
|
|
}
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the CT of the TE tunnel interface."
|
|
::= { hwTunnelTeGroups 8 }
|
|
|
|
hwCtFlowTemplateGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
--hwCtFlowTemplateID ,
|
|
hwCtFlowTemplateName ,
|
|
hwCt0Cos ,
|
|
hwCt0Scheduler ,
|
|
hwCt0Valid ,
|
|
hwCt1Cos ,
|
|
hwCt1Scheduler ,
|
|
hwCt1Valid ,
|
|
hwCt2Cos ,
|
|
hwCt2Scheduler ,
|
|
hwCt2Valid ,
|
|
hwCt3Cos ,
|
|
hwCt3Scheduler ,
|
|
hwCt3Valid ,
|
|
hwCt4Cos ,
|
|
hwCt4Scheduler ,
|
|
hwCt4Valid ,
|
|
hwCt5Cos ,
|
|
hwCt5Scheduler ,
|
|
hwCt5Valid ,
|
|
hwCt6Cos ,
|
|
hwCt6Scheduler ,
|
|
hwCt6Valid ,
|
|
hwCt7Cos ,
|
|
hwCt7Scheduler ,
|
|
hwCt7Valid ,
|
|
hwCtFlowTemplateCommit ,
|
|
hwCtFlowTemplateRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table describes the CT-FLOW-Mapping template configuration on the device."
|
|
::= { hwTunnelTeGroups 10 }
|
|
|
|
hwDsteInterfaceCfgGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
--hwDsteIfIndex ,
|
|
hwAppliedCtFlowTemplateName ,
|
|
hwCtBandWidthShareCfg
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table describes the CT-FLOW-Mapping template configuration on the device."
|
|
::= { hwTunnelTeGroups 11 }
|
|
|
|
|
|
|
|
hwTunnelDsTeTrap OBJECT IDENTIFIER ::= { hwTunnelTeMib 2 }
|
|
|
|
|
|
hwMplsFqShortage NOTIFICATION-TYPE
|
|
OBJECTS { hwCtConfigTunnelName }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This notification is generated when FQ (flow-queue) template resources are shortage."
|
|
::= { hwTunnelDsTeTrap 1 }
|
|
|
|
hwMplsSqShortage NOTIFICATION-TYPE
|
|
OBJECTS { hwCtConfigTunnelName }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This notification is generated when SQ (subscriber-queue) resources are shortage."
|
|
::= { hwTunnelDsTeTrap 2 }
|
|
|
|
hwMplsSqBandwidthExceed NOTIFICATION-TYPE
|
|
OBJECTS { hwCtConfigTunnelName }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This notification is generated when the total bandwidth of SQ (subscriber-queue) exceeds 10G bit/s in one LPU."
|
|
::= { hwTunnelDsTeTrap 3 }
|
|
|
|
hwMplsHsbFqShortage NOTIFICATION-TYPE
|
|
OBJECTS { hwCtConfigTunnelName }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This notification is generated when FQ (flow-queue) template resources in HSB are shortage."
|
|
::= { hwTunnelDsTeTrap 4 }
|
|
|
|
hwMplsHsbSqShortage NOTIFICATION-TYPE
|
|
OBJECTS { hwCtConfigTunnelName }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This notification is generated when SQ (subscriber-queue) resources in HSB are shortage."
|
|
::= { hwTunnelDsTeTrap 5 }
|
|
|
|
hwMplsHsbSqBandwidthExceed NOTIFICATION-TYPE
|
|
OBJECTS { hwCtConfigTunnelName }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This notification is generated when the total bandwidth of SQ (subscriber-queue) in HSB exceeds 10G bit/s in one LPU."
|
|
::= { hwTunnelDsTeTrap 6 }
|
|
|
|
hwTunnelTeTrapGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS { hwMplsHsbSqBandwidthExceed, hwMplsHsbSqShortage, hwMplsHsbFqShortage, hwMplsSqBandwidthExceed, hwMplsSqShortage, hwMplsFqShortage }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The HUAWEI Tunnel Te trap info."
|
|
::= { hwTunnelTeGroups 9 }
|
|
|
|
|
|
|
|
|
|
|
|
-- compliance statements
|
|
|
|
hwTunnelTeCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for HUAWEI-TUNNEL-TE-MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { hwTunnelDiffServGroup,
|
|
hwTunnelTeVsiGroup,
|
|
hwTunnelTeVllGroup,
|
|
hwTunnelTeL3vpnGroup,
|
|
hwTunnelTeStatisticsGroup,
|
|
hwCtTemplateGroup,
|
|
hwCtConfigCtGroup,
|
|
hwCtStatisticsGroup,
|
|
hwTunnelTeTrapGroup,
|
|
hwCtFlowTemplateGroup,
|
|
hwDsteInterfaceCfgGroup}
|
|
::= { hwTunnelTeCompliances 1 }
|
|
|
|
|
|
|
|
END
|
|
|
|
--
|
|
-- HUAWEI-TUNNEL-TE-MIB.mib
|
|
--
|