compass-core/mibs/HUAWEI-IF-EXT-MIB.mib

4724 lines
167 KiB
Plaintext

-- ==================================================================
-- Copyright (C) 2005 by HUAWEI TECHNOLOGIES. All rights reserved.
--
-- Description: HUAWEI Private Extended Interface MIB
-- Reference:
-- Version: V1.0
-- History:
-- V1.0
-- ==================================================================
-- ==================================================================
--
-- Variables and types be imported
--
-- ==================================================================
HUAWEI-IF-EXT-MIB DEFINITIONS ::= BEGIN
IMPORTS
hwDatacomm
FROM HUAWEI-MIB
ifIndex, ifName, InterfaceIndex,InterfaceIndexOrZero,ifAdminStatus,ifOperStatus,ifDescr
FROM IF-MIB
VlanIdOrNone, PortList
FROM Q-BRIDGE-MIB
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
FROM SNMPv2-CONF
IpAddress, Integer32, Unsigned32, Counter64, OBJECT-TYPE,
MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
sysUpTime
FROM SNMPv2-MIB
RowStatus, TruthValue, DisplayString,PhysAddress,TEXTUAL-CONVENTION
FROM SNMPv2-TC
AtmVpIdentifier, AtmVcIdentifier
FROM ATM-TC-MIB
ipAdEntNetMask
FROM IP-MIB;
hwIFExtMib MODULE-IDENTITY
LAST-UPDATED "200610312230Z" -- October 31, 2006 at 22:30 GMT
ORGANIZATION
"Huawei Technologies co.,Ltd."
CONTACT-INFO
"VRP Team Huawei Technologies co.,Ltd.
Huawei Bld.,NO.3 Xinxi Rd.,
Shang-Di Information Industry Base,
Hai-Dian District Beijing P.R. China
http://www.huawei.com
Zip:100085
"
DESCRIPTION
"Some attribute of interface extended content, information of
interface IP, interface of trunk interface."
::= { hwDatacomm 41 }
--
-- Textual conventions
--
-- Textual Convention
EnabledStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A simple status value for the object."
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
SnmpPasswdString ::= TEXTUAL-CONVENTION
DISPLAY-HINT
"16a"
STATUS current
DESCRIPTION
"The password string"
SYNTAX OCTET STRING (SIZE (0..16))
HWDirectionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Direction Flux Limit apply on."
SYNTAX INTEGER
{
inbound(1),
outbound(2)
}
-- ============================================================================
-- interface IP address group
-- ============================================================================
HwIpAddressType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The type of IP address."
SYNTAX INTEGER
{
primary(1),
sub(2)
}
--
-- Node definitions
--
hwIFExtObjects OBJECT IDENTIFIER ::= { hwIFExtMib 1 }
-- ====================================================================
-- basic interface extended definition group
-- ====================================================================
hwIFExtBase OBJECT IDENTIFIER ::= { hwIFExtObjects 1 }
-- ===========================================================================
-- interface extended group
-- ============================================================================
hwIFExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIFExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface extended table of private mib."
::= { hwIFExtBase 1 }
hwIFExtEntry OBJECT-TYPE
SYNTAX HwIFExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of private extended interface table."
INDEX { hwIFExtIndex }
::= { hwIFExtTable 1 }
HwIFExtEntry ::=
SEQUENCE {
hwIFExtIndex
InterfaceIndex,
hwIFExtLayer
INTEGER,
hwIFExtFrameType
INTEGER,
hwIFExtFlowStatInterval
Integer32,
hwIFExtFlushReceiveEnable
EnabledStatus,
hwIFExtFlushVlanId
VlanIdOrNone,
hwIFExtFlushPasswd
SnmpPasswdString,
hwIFExtFlowStatus
INTEGER,
hwIFExtMtu
Integer32,
hwIFExtMacAddr
PhysAddress,
hwIFExtBlockPriority
Integer32,
hwIFExtMacShift
INTEGER,
hwIFExtSuppressStatus
INTEGER
}
hwIFExtIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of extended table of interface."
::= { hwIFExtEntry 1 }
hwIFExtLayer OBJECT-TYPE
SYNTAX INTEGER
{
layer2(1),
layer3(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Switch the port between Layer3 and Layer2. Corresponding to the
port switch command.Layer2(1) is 1 when the port switch from layer3
to layer2.Layer3(1) is 1 when the port switch from lyaer2 to
layer3."
::= { hwIFExtEntry 2 }
hwIFExtFrameType OBJECT-TYPE
SYNTAX INTEGER
{
ethernetII(1),
ethernetSnap(2),
ethernet8022(3),
ethernet8023(4),
other(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frame type is accepted by VLAN virtual interfaces.Frame format
contains ethernetII(1),ethernetII(2),ethernet8022(3),ethernet8023.
The type location setting 1 when the ethernetII(1) type is
accepted.Now only surpport the first(ethernetII(1))"
::= { hwIFExtEntry 3 }
-- metric: second
hwIFExtFlowStatInterval OBJECT-TYPE
SYNTAX Integer32 (10..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval of interface flow stat.The value of interval must be divided
exactly by 10.The interface interval is effective,when both interface
interval and global interval are config.Globle interval is only effective
in interfaces,which interface interval is not configured. The real time
property of interface flow stat rate will be affected by the value of
interval."
DEFVAL { 300 }
::= { hwIFExtEntry 4 }
hwIFExtFlushReceiveEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether or not permit the port to take over FLUSHDUs. Once it is enabled,
the port will take over SmartLink FlushDUs from related vlans so as to delete
the MAC forwarding table in the local equipment."
DEFVAL { disabled }
::= { hwIFExtEntry 5 }
hwIFExtFlushVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ID of Vlan the port belongs to.When it is 0, it indicates
the function of receiving FlushPDU is disabled."
DEFVAL { 0 }
::= { hwIFExtEntry 6 }
hwIFExtFlushPasswd OBJECT-TYPE
SYNTAX SnmpPasswdString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A 16-octet read-write value used to define the password for negotiation."
DEFVAL { '00'h }
::= { hwIFExtEntry 7 }
hwIFExtFlowStatus OBJECT-TYPE
SYNTAX INTEGER
{
flowUp(1),
flowDown(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Current flow status of interface.
1:flow up
2:flow down"
::= { hwIFExtEntry 8 }
hwIFExtMtu OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Max Transmit Unit of the interface."
::= { hwIFExtEntry 9 }
hwIFExtMacAddr OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MAC address of the interface ."
::= { hwIFExtEntry 10 }
hwIFExtBlockPriority OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The blocked priority of the interface."
::= { hwIFExtEntry 11 }
hwIFExtMacShift OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
macShift(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mac-shift state of the interface.
1:normal
2:monitor mac-shift"
::= { hwIFExtEntry 12 }
hwIFExtSuppressStatus OBJECT-TYPE
SYNTAX INTEGER
{
unsuppress(0),
suppress(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The suppress state of the interface.
0:unsuppress
1:suppress"
::= { hwIFExtEntry 13 }
hwIFExtPhyStatus OBJECT-TYPE
SYNTAX INTEGER { up(1), down(2) }
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The physical status of member interface."
::= { hwIFExtBase 2 }
hwIFExtMemberOf OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The description of the main interface which has the membership with the member interface."
::= { hwIFExtBase 3 }
hwLinkModeChangeAutoCreateIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwLinkModeChangeAutoCreateIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface extended table of private mib."
::= { hwIFExtBase 4 }
hwLinkModeChangeAutoCreateIfEntry OBJECT-TYPE
SYNTAX HwLinkModeChangeAutoCreateIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of private extended interface table."
INDEX { hwAutoIfIndex }
::= { hwLinkModeChangeAutoCreateIfTable 1 }
HwLinkModeChangeAutoCreateIfEntry ::=
SEQUENCE {
hwAutoIfIndex
InterfaceIndex,
hwNewIfTimeslot
BITS
}
hwAutoIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of extended table of interface."
::= { hwLinkModeChangeAutoCreateIfEntry 1 }
hwNewIfTimeslot OBJECT-TYPE
SYNTAX BITS{
timeslot0(0),
timeslot1(1),
timeslot2(2),
timeslot3(3),
timeslot4(4),
timeslot5(5),
timeslot6(6),
timeslot7(7),
timeslot8(8),
timeslot9(9),
timeslot10(10),
timeslot11(11),
timeslot12(12),
timeslot13(13),
timeslot14(14),
timeslot15(15),
timeslot16(16),
timeslot17(17),
timeslot18(18),
timeslot19(19),
timeslot20(20),
timeslot21(21),
timeslot22(22),
timeslot23(23),
timeslot24(24),
timeslot25(25),
timeslot26(26),
timeslot27(27),
timeslot28(28),
timeslot29(29),
timeslot30(30),
timeslot31(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time slot of the TDM interface:
timeslot0(0):The time slot 0 on the TDM interface,
timeslot1(1):The time slot 1 on the TDM interface,
timeslot2(2):The time slot 2 on the TDM interface,
timeslot3(3):The time slot 3 on the TDM interface,
timeslot4(4):The time slot 4 on the TDM interface,
timeslot5(5):The time slot 5 on the TDM interface,
timeslot6(6):The time slot 6 on the TDM interface,
timeslot7(7):The time slot 7 on the TDM interface,
timeslot8(8):The time slot 8 on the TDM interface,
timeslot9(9):The time slot 9 on the TDM interface,
timeslot10(10):The time slot 10 on the TDM interface,
timeslot11(11):The time slot 11 on the TDM interface,
timeslot12(12):The time slot 12 on the TDM interface,
timeslot13(13):The time slot 13 on the TDM interface,
timeslot14(14):The time slot 14 on the TDM interface,
timeslot15(15):The time slot 15 on the TDM interface,
timeslot16(16):The time slot 16 on the TDM interface,
timeslot17(17):The time slot 17 on the TDM interface,
timeslot18(18):The time slot 18 on the TDM interface,
timeslot19(19):The time slot 19 on the TDM interface,
timeslot20(20):The time slot 20 on the TDM interface,
timeslot21(21):The time slot 21 on the TDM interface,
timeslot22(22):The time slot 22 on the TDM interface,
timeslot23(23):The time slot 23 on the TDM interface,
timeslot24(24):The time slot 24 on the TDM interface,
timeslot25(25):The time slot 25 on the TDM interface,
timeslot26(26):The time slot 26 on the TDM interface,
timeslot27(27):The time slot 27 on the TDM interface,
timeslot28(28):The time slot 28 on the TDM interface,
timeslot29(29):The time slot 29 on the TDM interface,
timeslot30(30):The time slot 30 on the TDM interface,
timeslot31(31):The time slot 31 on the TDM interface."
::= { hwLinkModeChangeAutoCreateIfEntry 2 }
hwIFExtPhyNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the physical interfaces."
::= { hwIFExtBase 5 }
hwInterfaceIp OBJECT IDENTIFIER ::= { hwIFExtObjects 2 }
hwIfIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIfIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface IP address configuration table .It contains IP address,
IP address mask, IP address acquiring method."
::= { hwInterfaceIp 1 }
hwIfIpEntry OBJECT-TYPE
SYNTAX HwIfIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Interface IP address configuration "
INDEX { hwIpAdEntAddr }
::= { hwIfIpTable 1 }
HwIfIpEntry ::=
SEQUENCE {
hwIpAdEntAddr
IpAddress,
hwIpAdEntIfIndex
Integer32,
hwIpAdEntNetMask
IpAddress,
hwIpAdEntBcastAddr
Integer32,
hwIpAdEntReasmMaxSize
Integer32,
hwIpAdEntAddressType
HwIpAddressType,
hwIfIpMethod
INTEGER,
hwIpAdEntAddrStatus
RowStatus
}
hwIpAdEntAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address to which this entry's addressing
information pertains."
::= { hwIfIpEntry 1 }
hwIpAdEntIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index value which uniquely identifies the
interface to which this entry is applicable. The
interface identified by a particular value of this
index is the same interface as identified by the
same value of ifIndex."
::= { hwIfIpEntry 2 }
hwIpAdEntNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The subnet mask associated with the IP address of
this entry. The value of the mask is an IP
address with all the network bits set to 1 and all
the host bits set to 0."
::= { hwIfIpEntry 3 }
hwIpAdEntBcastAddr OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the least-significant bit in the IP
broadcast address used for sending datagrams on
the (logical) interface associated with the IP
address of this entry. For example, when the
Internet standard all-ones broadcast address is
used, the value will be 1. This value applies to
both the subnet and network broadcasts addresses
used by the entity on this (logical) interface."
::= { hwIfIpEntry 4 }
hwIpAdEntReasmMaxSize OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the largest IP datagram which this
entity can re-assemble from incoming IP fragmented
datagram received on this interface."
::= { hwIfIpEntry 5 }
hwIpAdEntAddressType OBJECT-TYPE
SYNTAX HwIpAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag indicates whether the IP address is primary IP address.
One interface has only one primary IP address, but can have many sub IP address.
So when add a primary IP address to an interface that has already a primary IP address,
the new primary address will replace old primary address and the old primary address will be deleted."
::= { hwIfIpEntry 6 }
hwIfIpMethod OBJECT-TYPE
SYNTAX INTEGER
{
assignedIp(1),
dhcpIp(2),
bootpIp(3),
other(4),
linklayer(5),
random(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface IP address acquiring method.
assignedIp(1) indicates that the address was manually configured
to a specified address, for example, by user configuration.
dhcpIp(2) indicates an address that was assigned to this
system by a DHCP server.
bootpIp(3) indicates an address that was assigned to this
system by the bootp protocol.
other(4) indicates an address created by another method.
linklayer(5) indicates an address created by IPv6 stateless
auto-configuration.
random(6) indicates an address chosen by the system at
random, for example, an IPv4 address within 169.254/16, or an RFC
3041 privacy address."
::= { hwIfIpEntry 7 }
hwIpAdEntAddrStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status variable."
::= { hwIfIpEntry 8 }
hwIfIpUnnumberedTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIfIpUnnumberedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface IP address unnumbered table.
It contains lend IP address and lend IP address mask."
::= { hwInterfaceIp 2}
hwIfIpUnnumberedEntry OBJECT-TYPE
SYNTAX HwIfIpUnnumberedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Interface IP address unnumbered configuration "
INDEX { hwUnnumberedIfIndex }
::= {hwIfIpUnnumberedTable 1}
HwIfIpUnnumberedEntry ::=
SEQUENCE {
hwUnnumberedIfIndex
InterfaceIndex,
hwLendIfIndex
InterfaceIndex,
hwLendIpAddr
IpAddress,
hwLendIpAddrNetMask
IpAddress,
hwUnnumberedRowStatus
RowStatus
}
hwUnnumberedIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value of the unnumbered interface."
::= { hwIfIpUnnumberedEntry 1 }
hwLendIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index value of the lend interface."
::= { hwIfIpUnnumberedEntry 11 }
hwLendIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the lend interface."
::= { hwIfIpUnnumberedEntry 12 }
hwLendIpAddrNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address mask of the lend interface."
::= { hwIfIpUnnumberedEntry 13 }
hwUnnumberedRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status variable."
::= { hwIfIpUnnumberedEntry 51 }
-- ============================================================================
-- interface trunk attribute group
-- ============================================================================
hwTrunkAttr OBJECT IDENTIFIER ::= { hwIFExtObjects 3 }
hwTrunkIfMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of Trunk interface"
::= { hwTrunkAttr 1 }
hwTrunkNextIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The nextindex of Trunk interface,that means its position"
::= { hwTrunkAttr 2 }
hwTrunkIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwTrunkIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The trunk table."
::= { hwTrunkAttr 3 }
hwTrunkIfEntry OBJECT-TYPE
SYNTAX HwTrunkIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the trunk table."
INDEX { hwTrunkIndex }
::= { hwTrunkIfTable 1 }
HwTrunkIfEntry ::=
SEQUENCE {
hwTrunkIndex
Integer32,
hwTrunkIfID
Integer32,
hwTrunkIfType
INTEGER,
hwTrunkIfIndex
InterfaceIndex,
hwTrunkIfModel
INTEGER,
hwTrunkIfBandWidthAffectLinkNum
Integer32,
hwTrunkIfMinLinkNum
Integer32,
hwTrunkIfRowStatus
RowStatus,
hwTrunkIfWorkingMode
INTEGER,
hwTrunkIfWorkingState
INTEGER,
hwTrunkIfAutoRecover
INTEGER,
hwTrunkIfPreemptEnable
INTEGER,
hwTrunkIfPreemptDelay
Integer32,
hwTrunkIfTimeoutReceive
INTEGER,
hwTrunkIfFlushSendEnable
INTEGER,
hwTrunkIfFlushVlanId
Integer32,
hwTrunkIfFlushPasswd
SnmpPasswdString,
hwTrunkIfForceSwitchEnable
INTEGER,
hwTrunkIfStatReset
INTEGER,
hwTrunkBandwidth -- the band width of the trunk interface
Integer32,
hwTrunkIfArpSendSpeed
Integer32,
hwTrunkIfLagSelectedPortStd
INTEGER,
hwTrunkIfLagMaxActiveLinkNum
Integer32,
hwTrunkETrunkPriority
Integer32,
hwTrunkETrunkSysID
PhysAddress,
hwTrunkETrunkPriorityReset
INTEGER,
hwTrunkETrunkSysIDReset
INTEGER,
hwTrunkLocalPrefMode
INTEGER,
hwTrunkIfTrackVrrpVrid
Integer32,
hwTrunkIfTrackVrrpIfIndex
InterfaceIndex,
hwTrunkIfTrackVrrpReset
INTEGER,
hwTrunkIfBackupPreemptEnable
EnabledStatus,
hwTrunkIfBackupPreemptDelay
Integer32
}
-- the max bandwidth-affected-linknumber
-- the least active-linknumber of the up port
hwTrunkIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The number of the Trunk interface "
::= { hwTrunkIfEntry 1 }
hwTrunkIfID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The identification of the Trunk interface.It may identify Trunk
and is an index of the interface."
::= { hwTrunkIfEntry 2 }
hwTrunkIfType OBJECT-TYPE
SYNTAX INTEGER
{
ethTrunk(1),
ipTrunk(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The type of the Trunk interface includes eth-trunk and ip-trunk.
The ip-trunk is only comprised by pos link, otherwise the eth-trunk
is only comprised by ethernet link."
::= { hwTrunkIfEntry 3 }
hwTrunkIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Index number of the Trunk interface,it is consistent with ifIndex
of ifTable in IF-MIB."
::= { hwTrunkIfEntry 4 }
hwTrunkIfModel OBJECT-TYPE
SYNTAX INTEGER
{
packetAll(1),
sourceDesMac(2),
packetUdp(3),
packetTcp(4),
sourceDesIp(5),
sourceMacIpv6(6),
sourceIpIpv6(7),
sourceIp(8),
desIp(9),
sourceMac(10),
desMac(11),
sourcePort(12),
desPort(13),
sourceDesPort(14),
fwdType(15),
qos(16),
labelNum(17),
label(18),
invalid(-1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Participated model of interface load. sourceDesMac(1) and
sourceMac(10) and desMac(11) are Layer2 hash arithmetic."
::= { hwTrunkIfEntry 5 }
hwTrunkIfBandWidthAffectLinkNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The max bandwidth-affected-linknumber,
by default, an Eth-Trunk interface has a
maximum of 16 physical interfaces.
The number of physical interfaces in an
Eth-Trunk interface varies according to
the product type.Only in layer 2,can set this value."
::= { hwTrunkIfEntry 6 }
hwTrunkIfMinLinkNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The Trunk port changes to up when the number of the up port reach hwTrunkIfMinLinkNum. "
::= { hwTrunkIfEntry 7 }
hwTrunkIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Current operation status of the row "
::= { hwTrunkIfEntry 8 }
hwTrunkIfWorkingMode OBJECT-TYPE
SYNTAX INTEGER
{
masterBackup(1),
normalMode(2),
lacpStaticMode(3),
invalid(-1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Current working mode of trunk.
1:master/backup access mode
2:normal mode
3:lacp static mode"
::= { hwTrunkIfEntry 9 }
hwTrunkIfWorkingState OBJECT-TYPE
SYNTAX INTEGER
{
generalMode(1),
initialization(2),
masterWorking(3),
backupWorking(4),
invalid(-1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Current working state of backup-access trunk.
1:general mode working state
2:initialization
3:master working
4:backup working"
::= { hwTrunkIfEntry 10 }
hwTrunkIfAutoRecover OBJECT-TYPE
SYNTAX INTEGER
{
generalMode(1),
autoRecover(2),
invalid(-1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" If auto-recover has been set, the master port will be
working instead of the other port when it changes from
down state to up state.
1: don't support auto-recover
2: support auto-recover"
::= { hwTrunkIfEntry 11 }
hwTrunkIfPreemptEnable OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2),
invalid(-1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The preemption according to the priority will be and only be enabled when the lag port is working in static mode(M:N backup mode)
In default condition, the preemption is disabled."
DEFVAL { disabled }
::= { hwTrunkIfEntry 12 }
hwTrunkIfPreemptDelay OBJECT-TYPE
SYNTAX Integer32 (10..180 | -1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The waiting time for priority preemption; Unit: second.
It is enabled only when the priority preemption is enabled.
It indicates, When it comes to priority preemption, the operation
of preemption will be delayed for hwTrunkIfPreemptDelay time."
DEFVAL { 30 }
::= { hwTrunkIfEntry 13 }
hwTrunkIfTimeoutReceive OBJECT-TYPE
SYNTAX INTEGER
{
fast(1),
slow(2),
invalid(-1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The expired time for the port to receive LACPDUS.
There are two types:
1.fast: 3 seconds
2.slow: 90 seconds"
::= { hwTrunkIfEntry 14 }
hwTrunkIfFlushSendEnable OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2),
invalid(-1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether or not permit the trunk to transmit FlushDUs.It is only used
when it is in the handwork 1:1 mode.Once it is enabled, the newly active
interface in the trunk will send SmartLink FlushDUs so as to delete the
related MAC forwarding table of the layer2 equipment in network.Otherwise,
SmartLink FlushDUs will not be sent."
DEFVAL { disabled }
::= { hwTrunkIfEntry 15 }
hwTrunkIfFlushVlanId OBJECT-TYPE
SYNTAX Integer32 (0..4094 | -1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ID of Vlan the partner port belongs to.When it is 0, it indicates
the function of sending FlushPDU is disabled. "
DEFVAL { 0 }
::= { hwTrunkIfEntry 16 }
hwTrunkIfFlushPasswd OBJECT-TYPE
SYNTAX SnmpPasswdString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A 16-octet read-create value used to define the password for negotiation."
DEFVAL { '00'h }
::= { hwTrunkIfEntry 17 }
hwTrunkIfForceSwitchEnable OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
invalid(-1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It is only used when it is in the handwork 1:1 mode and the current
working link is the backup link. At that time, working link will move
from backup link to master link. However, if the master link is down,
the operation will be forbidden."
::= { hwTrunkIfEntry 18 }
hwTrunkIfStatReset OBJECT-TYPE
SYNTAX INTEGER
{
reset(1),
ready(2),
invalid(-1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Reset the statistic information of LACPDUsRx,MarkerPDUsRx,LACPDUsTx,
MarkerResponsePDUsTx for all the ports in the current trunk."
::= { hwTrunkIfEntry 19 }
hwTrunkBandwidth OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Current bandwidth of trunk in units of 1,000,000 bits per second. This bandwidth is the peculiar property of Eth-Trunk. And to the other kinds of trunk, this bandwidth is -1."
::= { hwTrunkIfEntry 20 }
hwTrunkIfArpSendSpeed OBJECT-TYPE
SYNTAX Integer32(800..3000 | -1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the rate of sending gratuitous ARP packets (in pkts/sec) on the trunk member interface. "
DEFVAL { 2000 }
::= { hwTrunkIfEntry 21 }
hwTrunkIfLagSelectedPortStd OBJECT-TYPE
SYNTAX INTEGER
{
speed(1),
priority(2),
invalid(-1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The static mode Eth-trunk selected port standard.
There are two types:
1.speed : selected by port's speed
2.priority: selected by port's priority
The default type is priority."
DEFVAL { priority }
::= { hwTrunkIfEntry 22 }
hwTrunkIfLagMaxActiveLinkNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The static mode Eth-trunk selected ports can not more than the value."
::= { hwTrunkIfEntry 23 }
hwTrunkETrunkPriority OBJECT-TYPE
SYNTAX Integer32 (0..65535 | -1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority of the E-Trunk."
::= { hwTrunkIfEntry 24 }
hwTrunkETrunkSysID OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The system ID of the E-Trunk. If set ffff-ffff-ffff the system ID will be to default."
::= { hwTrunkIfEntry 25 }
hwTrunkETrunkPriorityReset OBJECT-TYPE
SYNTAX INTEGER
{
yes(1),
no(2),
invalid(-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of operation, there are yes(1) and no(2).
It expresses whether the configure of E-Trunk priority is resetted."
DEFVAL { no }
::= { hwTrunkIfEntry 26 }
hwTrunkETrunkSysIDReset OBJECT-TYPE
SYNTAX INTEGER
{
yes(1),
no(2),
invalid(-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of operation, there are yes(1) and no(2).
It expresses whether the configure of E-Trunk system ID is resetted."
DEFVAL { no }
::= { hwTrunkIfEntry 27 }
hwTrunkLocalPrefMode OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Local-preference transmit mode of eth-trunk, there are enable(1) and disable(2).The default value is disable(2)."
::= { hwTrunkIfEntry 28 }
hwTrunkIfTrackVrrpVrid OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VRID which the static mode Eth-trunk tracked to."
::= { hwTrunkIfEntry 29 }
hwTrunkIfTrackVrrpIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VRRP interface which the static mode Eth-trunk tracked to."
::= { hwTrunkIfEntry 30 }
hwTrunkIfTrackVrrpReset OBJECT-TYPE
SYNTAX INTEGER
{
yes(1),
no(2),
invalid(-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of operation, there are yes(1) and no(2).
The value of this object identifies whether
the operation of clearing the configuration
is performed. And the configuration is that
the Eth-Trunk interface in static LACP mode
is associated with an mVRRP backup group.
The value yes(1) indicates performing the operation.
This object indicates one operation but not one status,
so when the operation is performed, the value is no(2).
By default, the value is no(2)."
::= { hwTrunkIfEntry 31 }
hwTrunkIfBackupPreemptEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The preemption according to the master and slave port will be and only be enabled when eth-trunk is working in backup mode.
In default condition, the preemption is disabled."
DEFVAL { disabled }
::= { hwTrunkIfEntry 32 }
hwTrunkIfBackupPreemptDelay OBJECT-TYPE
SYNTAX Integer32 (0..30 | -1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The waiting time for priority preemption; Unit: minute.
It is enabled only when the priority preemption is enabled.
It indicates, When it comes to priority preemption, the operation
of preemption will be delayed for hwTrunkIfBackupPreemptDelay time."
DEFVAL { 0 }
::= { hwTrunkIfEntry 33 }
hwTrunkSystemPriority OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority of the system."
::= { hwTrunkAttr 4 }
hwTrunkUnknownUnicastIfModel OBJECT-TYPE
SYNTAX INTEGER
{
packetAll(1),
sourceDesMac(2),
packetUdp(3),
packetTcp(4),
sourceDesIp(5),
sourceMacIpv6(6),
sourceIpIpv6(7),
sourceIp(8),
desIp(9),
sourceMac(10),
desMac(11),
sourcePort(12),
desPort(13),
sourceDesPort(14),
label(15),
ipOrLabel(16)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Participated model of load for unknown unicast. sourceDesMac(2) and
sourceMac(10) and desMac(11) are Layer2 hash arithmetic."
::= { hwTrunkAttr 5 }
hwTrunkETrunkSystemPriority OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The system priority of the E-Trunk."
::= { hwTrunkAttr 6 }
hwTrunkETrunkSystemID OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The system ID of the E-Trunk. If set ffff-ffff-ffff the system ID will be to default."
::= { hwTrunkAttr 7 }
-- ----------------------------------------------------------------------------
-- Trunk member attribute Group
-- ----------------------------------------------------------------------------
hwTrunkMemAttr OBJECT IDENTIFIER ::= { hwIFExtObjects 4 }
hwTrunkMemTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwTrunkMemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Trunk member attribute information table."
::= { hwTrunkMemAttr 1 }
hwTrunkMemEntry OBJECT-TYPE
SYNTAX HwTrunkMemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Trunk member attribute information"
INDEX { hwTrunkIndex, hwTrunkMemifIndex }
::= { hwTrunkMemTable 1 }
HwTrunkMemEntry ::=
SEQUENCE {
hwTrunkMemifIndex
Integer32,
hwTrunkValidEntry
INTEGER,
hwTrunkSelectStatus
INTEGER,
hwTrunkLacpStatus
EnabledStatus,
hwTrunkDeleteFlag
EnabledStatus,
hwTrunkOperstatus
INTEGER,
hwTrunkIsDefaultLagRecv
TruthValue,
hwTrunkPortWeight
Unsigned32,
hwTrunkPortStandby
Unsigned32,
hwTrunkRowStatus
RowStatus,
hwTrunkPortMaster
INTEGER,
hwTrunkPortPriority
Integer32,
hwTrunkPortStatReset
INTEGER
}
hwTrunkMemifIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Trunk port index"
::= { hwTrunkMemEntry 1 }
hwTrunkValidEntry OBJECT-TYPE
SYNTAX INTEGER
{
valid(1),
invalid(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid Entries of Trunk interface "
::= { hwTrunkMemEntry 2 }
hwTrunkSelectStatus OBJECT-TYPE
SYNTAX INTEGER
{
trunkSelected(1),
trunkDeselected(2),
invalid(-1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Selected Status of Trunk Port.It is used LACP."
::= { hwTrunkMemEntry 3 }
hwTrunkLacpStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is status of the LACP."
::= { hwTrunkMemEntry 4 }
hwTrunkDeleteFlag OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flag is set trunk_del_enable(1) or trunk_del_disable(2),
according to operation."
::= { hwTrunkMemEntry 5 }
hwTrunkOperstatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of operation, indicates port status. There are trunk_up(1)
and trunk_down(2).It expresses whether port is shutdown."
::= { hwTrunkMemEntry 6 }
hwTrunkIsDefaultLagRecv OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"We don't sustain now, default value is false."
::= { hwTrunkMemEntry 7 }
hwTrunkPortWeight OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port weight, it expresses proportion of port in Trunk interface table"
::= { hwTrunkMemEntry 8 }
hwTrunkPortStandby OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value is backup of Trunk Port."
::= { hwTrunkMemEntry 9 }
hwTrunkRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Current operation status of the row. "
::= { hwTrunkMemEntry 10 }
hwTrunkPortMaster OBJECT-TYPE
SYNTAX INTEGER
{
portSlave(1),
portMaster(2),
invalid(-1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Master port of backup-access eth-trunk or not
1: port-slave
2: port-master"
::= { hwTrunkMemEntry 11 }
hwTrunkPortPriority OBJECT-TYPE
SYNTAX Integer32 (0..65535 | -1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority value assigned to this Trunk Port.
This 16-bit value is read-write."
::= { hwTrunkMemEntry 12 }
hwTrunkPortStatReset OBJECT-TYPE
SYNTAX INTEGER
{
reset(1),
ready(2),
invalid(-1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Reset the statistic information of LACPDUsRx,MarkerPDUsRx,LACPDUsTx,
MarkerResponsePDUsTx for the current port."
::= { hwTrunkMemEntry 13 }
-- ===========================================================================
-- Global interfacce flow stat interval group
-- ===========================================================================
hwIFFlowStat OBJECT IDENTIFIER ::= { hwIFExtObjects 5 }
-- metric: second
hwIFFlowStatGlobalInterval OBJECT-TYPE
SYNTAX Integer32 (10..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global interval of interface flow stat.The interface interval is effective,
when both interface interval and global interval are config.Globle interval
is only effective in interfaces,which interface interval is not configged.
Flow stat rate of interface will be affected by the value of interval.
The default value is 300s."
::= { hwIFFlowStat 1 }
-- ===========================================================================
-- Global interface flow stat interval group
-- ===========================================================================
hwIfStatistics OBJECT IDENTIFIER ::= { hwIFExtObjects 6 }
hwIfEtherStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIfEtherStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Ethernet Interface Statistic Table "
::= { hwIfStatistics 1 }
hwIfEtherStatEntry OBJECT-TYPE
SYNTAX HwIfEtherStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Entry of Ethernet Interface Statistic Table "
INDEX { hwIfEtherStatIfIndex }
::= { hwIfEtherStatTable 1 }
HwIfEtherStatEntry ::=
SEQUENCE {
hwIfEtherStatIfIndex
InterfaceIndex,
hwIfEtherStatInPkts64Octets
Counter64,
hwIfEtherStatInPkts65to127Octets
Counter64,
hwIfEtherStatInPkts128to255Octets
Counter64,
hwIfEtherStatInPkts256to511Octets
Counter64,
hwIfEtherStatInPkts512to1023Octets
Counter64,
hwIfEtherStatInPkts1024to1518Octets
Counter64,
hwIfEtherStatInJumboPkts
Counter64,
hwIfEtherStatInCRCPkts
Counter64,
hwIfEtherStatInLongPkts
Counter64,
hwIfEtherStatInJabberPkts
Counter64,
hwIfEtherStatInFragmentPkts
Counter64,
hwIfEtherStatInUnderSizePkts
Counter64,
hwIfEtherStatInOverRunPkts
Counter64,
hwIfEtherStatInPausePkts
Counter64,
hwIfEtherStatOutJumboPkts
Counter64,
hwIfEtherStatOutOverflowPkts
Counter64,
hwIfEtherStatOutUnderRunPkts
Counter64,
hwIfEtherStatOutPausePkts
Counter64,
hwIfEthIfStatReset
INTEGER,
hwIfEtherStatInDropEventPkts
Counter64,
hwIfEtherStatInAlignmentPkts
Counter64,
hwIfEtherStatInSymbolPkts
Counter64,
hwIfEtherStatInIgnoredPkts
Counter64,
hwIfEtherStatInFramePkts
Counter64,
hwIfEtherStatOutCollisionPkts
Counter64,
hwIfEtherStatOutDeferredPkts
Counter64,
hwIfEtherStatOutLateCollisionPkts
Counter64,
hwIfEtherStatOutExcessiveCollisionPkts
Counter64,
hwIfEtherStatOutBufferPurgationPkts
Counter64
}
hwIfEtherStatIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The index of L2 interface "
::= { hwIfEtherStatEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.5
hwIfEtherStatInPkts64Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of recieved Packets whose size over 1518 bytes "
::= { hwIfEtherStatEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.6
hwIfEtherStatInPkts65to127Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of recieved Packets whose size over 1518 bytes "
::= { hwIfEtherStatEntry 6 }
-- 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.7
hwIfEtherStatInPkts128to255Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of recieved Packets whose size over 1518 bytes "
::= { hwIfEtherStatEntry 7 }
-- 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.8
hwIfEtherStatInPkts256to511Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of recieved Packets whose size over 1518 bytes "
::= { hwIfEtherStatEntry 8 }
-- 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.9
hwIfEtherStatInPkts512to1023Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of recieved Packets whose size over 1518 bytes "
::= { hwIfEtherStatEntry 9 }
-- 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.10
hwIfEtherStatInPkts1024to1518Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of recieved Packets whose size over 1518 bytes "
::= { hwIfEtherStatEntry 10 }
hwIfEtherStatInJumboPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of recieved Packets whose size over 1518 bytes "
::= { hwIfEtherStatEntry 11 }
hwIfEtherStatInCRCPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of recieved Packets which have CRC checking errors "
::= { hwIfEtherStatEntry 12 }
hwIfEtherStatInLongPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of recieved Packets whose length is over maximum length "
::= { hwIfEtherStatEntry 13 }
hwIfEtherStatInJabberPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of recieved Packets whose length is over maximum length
and wrong CRC checking "
::= { hwIfEtherStatEntry 14 }
hwIfEtherStatInFragmentPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of recieved Packets which have short size and wrong CRC checking "
::= { hwIfEtherStatEntry 15 }
hwIfEtherStatInUnderSizePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of recieved Packets which have short size but right CRC checking "
::= { hwIfEtherStatEntry 16 }
hwIfEtherStatInOverRunPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of recieved Packets whose queue overflow "
::= { hwIfEtherStatEntry 17 }
hwIfEtherStatInPausePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of recieved control Frames "
::= { hwIfEtherStatEntry 18 }
hwIfEtherStatOutJumboPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of sended Packets whose size over 1518 bytes "
::= { hwIfEtherStatEntry 19 }
hwIfEtherStatOutOverflowPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of Packets whitch happen FIFO overflow error"
::= { hwIfEtherStatEntry 20 }
hwIfEtherStatOutUnderRunPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of Packets whitch happen FIFO empty"
::= { hwIfEtherStatEntry 21 }
hwIfEtherStatOutPausePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of sended control Frames "
::= { hwIfEtherStatEntry 22 }
hwIfEthIfStatReset OBJECT-TYPE
SYNTAX INTEGER
{
reset(1),
ready(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Reset the Statistic information Counter "
::= { hwIfEtherStatEntry 23 }
hwIfEtherStatInDropEventPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of recieved Packets discarded for GBP full or back pressure discard "
::= { hwIfEtherStatEntry 24 }
hwIfEtherStatInAlignmentPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of recieved Packets which have frame alignment error "
::= { hwIfEtherStatEntry 25 }
hwIfEtherStatInSymbolPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of recieved Packets which have unknown symbols "
::= { hwIfEtherStatEntry 26 }
hwIfEtherStatInIgnoredPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of recieved MAC control frames which have unknown opecode "
::= { hwIfEtherStatEntry 27 }
hwIfEtherStatInFramePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of recieved frames whose actual length differs with 802.3 "
::= { hwIfEtherStatEntry 28 }
hwIfEtherStatOutCollisionPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of sended collision Frames(only happen in the 10/100M port with half duplex mode) "
::= { hwIfEtherStatEntry 29 }
hwIfEtherStatOutDeferredPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of sended deferred but not collision Frames(only happen in the 10/100M port) "
::= { hwIfEtherStatEntry 30 }
hwIfEtherStatOutLateCollisionPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of sended deferred and collision Frames(only happen in the 10/100M port) "
::= { hwIfEtherStatEntry 31 }
hwIfEtherStatOutExcessiveCollisionPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of sended failure Frames whose collision more than 16(only happen in the 10/100M port) "
::= { hwIfEtherStatEntry 32 }
hwIfEtherStatOutBufferPurgationPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of sended Frames which is purged from the buffer because of long time "
::= { hwIfEtherStatEntry 33 }
hwIfSdhStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIfSdhStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Sdh/sonet Interface Statistic Table "
::= { hwIfStatistics 2 }
hwIfSdhStatEntry OBJECT-TYPE
SYNTAX HwIfSdhStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Entry of Sdh/Sonet Interface Statistic Table "
INDEX { hwIfSdhStatIfIndex }
::= { hwIfSdhStatTable 1 }
HwIfSdhStatEntry ::=
SEQUENCE {
hwIfSdhStatIfIndex
InterfaceIndex,
hwIfSdhStatInCRCPkts
Counter64,
hwIfSdhStatInShortPkts
Counter64,
hwIfSdhStatInLongPkts
Counter64,
hwIfSdhStatOutOverRunPkts
Counter64,
hwIfSdhStatOutUnderRunPkts
Counter64,
hwIfSdhIfStatReset
INTEGER
}
hwIfSdhStatIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The index of sdh/sonet interface "
::= { hwIfSdhStatEntry 1 }
hwIfSdhStatInCRCPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of recieved Packets which have CRC checking errors "
::= { hwIfSdhStatEntry 2 }
hwIfSdhStatInShortPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of recieved Packets whose length is under minimal length "
::= { hwIfSdhStatEntry 3 }
hwIfSdhStatInLongPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of recieved Packets whose length is over maximum length "
::= { hwIfSdhStatEntry 4 }
hwIfSdhStatOutOverRunPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of sent Packets whose queue overflow "
::= { hwIfSdhStatEntry 5 }
hwIfSdhStatOutUnderRunPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of sent Packets whose queue underflow "
::= { hwIfSdhStatEntry 6 }
hwIfSdhIfStatReset OBJECT-TYPE
SYNTAX INTEGER
{
reset(1),
ready(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Reset the Statistic information Counter "
::= { hwIfSdhStatEntry 7 }
hwIfAtmStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIfAtmStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Atm Interface Statistic Table "
::= { hwIfStatistics 3 }
hwIfAtmStatEntry OBJECT-TYPE
SYNTAX HwIfAtmStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Entry of Atm Interface Statistic Table "
INDEX { hwIfAtmStatIfIndex }
::= { hwIfAtmStatTable 1 }
HwIfAtmStatEntry ::=
SEQUENCE {
hwIfAtmStatIfIndex
InterfaceIndex,
hwIfAtmStatInGoodCells
Counter64,
hwIfAtmStatInIdleCells
Counter64,
hwIfAtmStatInCorrectedCells
Counter64,
hwIfAtmStatInUncorrectedCells
Counter64,
hwIfAtmStatOutGoodCells
Counter64,
hwIfAtmStatOutIdleCells
Counter64,
hwIfAtmIfStatReset
INTEGER
}
hwIfAtmStatIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The index of atm interface "
::= { hwIfAtmStatEntry 1 }
hwIfAtmStatInGoodCells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of good cells recieved "
::= { hwIfAtmStatEntry 2 }
hwIfAtmStatInIdleCells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of idle cells recieved "
::= { hwIfAtmStatEntry 3 }
hwIfAtmStatInCorrectedCells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of recieved cells whitch have been corrected. "
::= { hwIfAtmStatEntry 4 }
hwIfAtmStatInUncorrectedCells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of recieved cells whitch can not be corrected. "
::= { hwIfAtmStatEntry 5 }
hwIfAtmStatOutGoodCells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of good cells sent "
::= { hwIfAtmStatEntry 6 }
hwIfAtmStatOutIdleCells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of idle cells sent "
::= { hwIfAtmStatEntry 7 }
hwIfAtmIfStatReset OBJECT-TYPE
SYNTAX INTEGER
{
reset(1),
ready(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Reset the Statistic information Counter "
::= { hwIfAtmStatEntry 8 }
hwIfMonitorObject OBJECT IDENTIFIER ::= { hwIFExtObjects 7 }
hwIfMonitorThresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIfMonitorThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Alarm monitor table "
::= { hwIfMonitorObject 1 }
hwIfMonitorThresholdEntry OBJECT-TYPE
SYNTAX HwIfMonitorThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Entry of alarm monitor table "
INDEX { hwIfMonitorIndex }
::= { hwIfMonitorThresholdTable 1 }
HwIfMonitorThresholdEntry::=
SEQUENCE {
hwIfMonitorIndex
InterfaceIndex,
hwIfMonitorCrcErrorStatistics
Counter64,
hwIfMonitorCrcErrorThreshold
Integer32,
hwIfMonitorCrcErrorInterval
Integer32,
hwIfMonitorSdhErrorStatistics
Counter64,
hwIfMonitorSdhErrorThreshold
Integer32,
hwIfMonitorSdhErrorInterval
Integer32,
hwIfMonitorInputRatePercentage
Integer32,
hwIfMonitorInputRateThreshold
Integer32,
hwIfMonitorOutputRatePercentage
Integer32,
hwIfMonitorOutputRateThreshold
Integer32,
hwIfMonitorPauseFrameStatistics
Counter64,
hwIfMonitorPauseFrameThreshold
Integer32,
hwIfMonitorPauseFrameInterval
Integer32,
hwIfMonitorDelayValue
Integer32,
hwIfMonitorDelayThreshold
Integer32,
hwIfMonitorJitterValue
Integer32,
hwIfMonitorJitterThreshold
Integer32,
hwIfMonitorName
DisplayString,
hwIfMonitorSdhB1ErrorStatistics
Counter64,
hwIfMonitorSdhB1ErrorThreshold
Integer32,
hwIfMonitorSdhB1ErrorInterval
Integer32,
hwIfMonitorSdhB2ErrorStatistics
Counter64,
hwIfMonitorSdhB2ErrorThreshold
Integer32,
hwIfMonitorSdhB2ErrorInterval
Integer32,
hwIfMonitorSymbolErrorStatistics
Counter64,
hwIfMonitorSymbolErrorThreshold
Integer32,
hwIfMonitorSymbolErrorInterval
Integer32,
hwIfMonitorBadBytesErrorStatistics
Counter64,
hwIfMonitorBadBytesErrorThreshold
Integer32,
hwIfMonitorBadBytesErrorInterval
Integer32
}
hwIfMonitorIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Index of alarm monitor table "
::= { hwIfMonitorThresholdEntry 1 }
hwIfMonitorCrcErrorStatistics OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Crc error statistics value "
::= { hwIfMonitorThresholdEntry 2 }
hwIfMonitorCrcErrorThreshold OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Crc error alarm threshold,default value is 3 and 0 is an invalid value "
::= { hwIfMonitorThresholdEntry 3 }
hwIfMonitorCrcErrorInterval OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Crc error alarm interval time(unit is second),default value is 10s and 0 is an invalid value "
::= { hwIfMonitorThresholdEntry 4 }
hwIfMonitorSdhErrorStatistics OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Sdh error statistics value only for B3"
::= { hwIfMonitorThresholdEntry 5 }
hwIfMonitorSdhErrorThreshold OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Sdh error alarm threshold,only for B3,default value is 3 and 0 is an invalid value "
::= { hwIfMonitorThresholdEntry 6 }
hwIfMonitorSdhErrorInterval OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Sdh error alarm interval time(unit is second),only for B3,default value is 10s and 0 is an invalid value "
::= { hwIfMonitorThresholdEntry 7 }
hwIfMonitorInputRatePercentage OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Input rate percentage value "
::= { hwIfMonitorThresholdEntry 8 }
hwIfMonitorInputRateThreshold OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Input rate alarm threshold,default value is 100 "
::= { hwIfMonitorThresholdEntry 9 }
hwIfMonitorOutputRatePercentage OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Output rate percentage value "
::= { hwIfMonitorThresholdEntry 10 }
hwIfMonitorOutputRateThreshold OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Output rate alarm threshold,default value is 100 "
::= { hwIfMonitorThresholdEntry 11 }
hwIfMonitorPauseFrameStatistics OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Pause frame statistics value "
::= { hwIfMonitorThresholdEntry 12 }
hwIfMonitorPauseFrameThreshold OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Pause frame alarm threshold,and 0 is an invalid value "
::= { hwIfMonitorThresholdEntry 13 }
hwIfMonitorPauseFrameInterval OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Pause frame alarm interval time(unit is second),and 0 is an invalid value "
::= { hwIfMonitorThresholdEntry 14 }
hwIfMonitorDelayValue OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Delay value "
::= { hwIfMonitorThresholdEntry 15 }
hwIfMonitorDelayThreshold OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Delay alarm threshold "
::= { hwIfMonitorThresholdEntry 16 }
hwIfMonitorJitterValue OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Jitter value "
::= { hwIfMonitorThresholdEntry 17 }
hwIfMonitorJitterThreshold OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Jitter alarm threshold "
::= { hwIfMonitorThresholdEntry 18 }
hwIfMonitorName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Interface's name of alarm monitor table "
::= { hwIfMonitorThresholdEntry 19 }
hwIfMonitorSdhB1ErrorStatistics OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Sdh B1 error statistics value"
::= { hwIfMonitorThresholdEntry 20 }
hwIfMonitorSdhB1ErrorThreshold OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Sdh B1 error alarm threshold,default value is 3"
::= { hwIfMonitorThresholdEntry 21 }
hwIfMonitorSdhB1ErrorInterval OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Sdh B1 error alarm interval time(unit is second),default value is 10s"
::= { hwIfMonitorThresholdEntry 22 }
hwIfMonitorSdhB2ErrorStatistics OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Sdh B2 error statistics value"
::= { hwIfMonitorThresholdEntry 23 }
hwIfMonitorSdhB2ErrorThreshold OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Sdh error B2 alarm threshold,default value is 3"
::= { hwIfMonitorThresholdEntry 24 }
hwIfMonitorSdhB2ErrorInterval OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Sdh B2 error alarm interval time(unit is second),default value is 10s"
::= { hwIfMonitorThresholdEntry 25 }
hwIfMonitorSymbolErrorStatistics OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Symbol error statistics value "
::= { hwIfMonitorThresholdEntry 26 }
hwIfMonitorSymbolErrorThreshold OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Symbol error alarm threshold,default value is 3 "
::= { hwIfMonitorThresholdEntry 27 }
hwIfMonitorSymbolErrorInterval OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Symbol error alarm interval time(unit is second),default value is 10s"
::= { hwIfMonitorThresholdEntry 28 }
-- 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.40
hwIfMonitorBadBytesErrorStatistics OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { hwIfMonitorThresholdEntry 40 }
-- 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.41
hwIfMonitorBadBytesErrorThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { hwIfMonitorThresholdEntry 41 }
-- 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.42
hwIfMonitorBadBytesErrorInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { hwIfMonitorThresholdEntry 42 }
hwIfMonitorGeneral OBJECT IDENTIFIER ::= { hwIFExtObjects 8 }
hwIfMonitorCrcEnabledStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enalbe or disable the crc error monitor, and the default value is disable."
::= { hwIfMonitorGeneral 1 }
hwIfMonitorSdhEnabledStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enalbe or disable the sdh error monitor, and the default value is disable."
::= { hwIfMonitorGeneral 2 }
hwIfMonitorInputRateEnabledStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enalbe or disable the input rate monitor, and the default value is disable."
::= { hwIfMonitorGeneral 3}
hwIfMonitorOutputRateEnabledStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enalbe or disable the output rate monitor, and the default value is disable."
::= { hwIfMonitorGeneral 4 }
hwIfMonitorHalfDuplexEnabledStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enalbe or disable the half duplex monitor, and the default value is disable."
::= { hwIfMonitorGeneral 5}
hwIfMonitorPauseRisingEnabledStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enalbe or disable the pause frame rising monitor, and the default value is disable."
::= { hwIfMonitorGeneral 6 }
hwIfMonitorPauseContinuingEnabledStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enalbe or disable the pause frame continuing monitor, and the default value is disable."
::= { hwIfMonitorGeneral 7 }
-- 1.3.6.1.4.1.2011.5.25.41.1.8.8
hwifMonitorBadBytesEnabledStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { hwIfMonitorGeneral 8 }
hwAdminVrrpMemberIf OBJECT IDENTIFIER ::= { hwIFExtObjects 9 }
hwIfFlowChangeTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS obsolete
DESCRIPTION
"The time indicates when the interface's flow status changes."
::= { hwAdminVrrpMemberIf 1 }
hwAdminVrrpMemberIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAdminVrrpMemberIfEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The interface bound to VRRP table."
::= { hwAdminVrrpMemberIf 2 }
hwAdminVrrpMemberIfEntry OBJECT-TYPE
SYNTAX HwAdminVrrpMemberIfEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Entries of the interface bound to VRRP table."
INDEX{ hwAdminVrrpMemberIfIndex }
::= { hwAdminVrrpMemberIfTable 1}
HwAdminVrrpMemberIfEntry ::=
SEQUENCE {
hwAdminVrrpMemberIfIndex
InterfaceIndex,
hwAdminVrrpVrid
Integer32,
hwAdminVrrpIfIndex
InterfaceIndex,
hwAdminVrrpMemberIfFlowStatus
INTEGER,
hwAdminVrrpMemberIfRowStatus
RowStatus
}
hwAdminVrrpMemberIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The number of the interface."
::= { hwAdminVrrpMemberIfEntry 1 }
hwAdminVrrpVrid OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The administrator VRRP vrid."
::= { hwAdminVrrpMemberIfEntry 2 }
hwAdminVrrpIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The administrator VRRP's configure interface index."
::= { hwAdminVrrpMemberIfEntry 3 }
hwAdminVrrpMemberIfFlowStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
" Current flow status of interface.
1:up
2:down"
::= { hwAdminVrrpMemberIfEntry 4 }
hwAdminVrrpMemberIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"Current operation status of the row."
::= { hwAdminVrrpMemberIfEntry 5 }
hwIfFluxLimit OBJECT IDENTIFIER ::= { hwIFExtObjects 10 }
hwIfFluxLimitTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIfFluxLimitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Flux limit table "
::= { hwIfFluxLimit 1 }
hwIfFluxLimitEntry OBJECT-TYPE
SYNTAX HwIfFluxLimitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Entry of flux limit table "
INDEX { hwIfFluxIfIndex,hwIfFluxVlanId }
::= { hwIfFluxLimitTable 1}
HwIfFluxLimitEntry ::=
SEQUENCE {
hwIfFluxIfIndex
InterfaceIndex,
hwIfFluxVlanId
VlanIdOrNone,
hwIfFluxDirection
HWDirectionType,
hwIfFluxLimitType
INTEGER,
hwIfFluxCir
Integer32,
hwIfFluxCbs
Integer32,
hwIfFluxRowStatus
RowStatus
}
hwIfFluxIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface Index, same as ifIndex."
::= { hwIfFluxLimitEntry 1 }
hwIfFluxVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Vlan ID.
0 is the default value"
::= { hwIfFluxLimitEntry 2 }
hwIfFluxDirection OBJECT-TYPE
SYNTAX HWDirectionType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Limit direction:
inbound (1)
outbound (2)"
::= { hwIfFluxLimitEntry 3 }
hwIfFluxLimitType OBJECT-TYPE
SYNTAX INTEGER
{
broadcastSuppression(1),
multicastSuppression(2),
unknownUnicastSuppression(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flux limit type: broadcastSuppression(1),multicastSuppression(2),unknownUnicastSuppression(3)."
::= { hwIfFluxLimitEntry 4 }
hwIfFluxCir OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Committed Information Rate. Unit: kbps.
software QoS: 8..155000
hardware QoS: 100..10000000"
::= { hwIfFluxLimitEntry 5 }
hwIfFluxCbs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Committed Burst Size. Unit: byte
software QoS: 1875..19375000
hardware QoS: 64..33554432"
::= { hwIfFluxLimitEntry 6 }
hwIfFluxRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus. Three actions are used: active,
createAndGo, destroy"
::= { hwIfFluxLimitEntry 7 }
hwIfDiffServ OBJECT IDENTIFIER ::= { hwIFExtObjects 11 }
hwIfDiffServTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIfDiffServEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table describes the different service mode of interfaces."
::= { hwIfDiffServ 1}
hwIfDiffServEntry OBJECT-TYPE
SYNTAX HwIfDiffServEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface different service mode attribute configuration."
INDEX { hwIfDiffServIndex }
::= {hwIfDiffServTable 1}
HwIfDiffServEntry ::=
SEQUENCE {
hwIfDiffServIndex
InterfaceIndex,
hwIfDiffServMode
INTEGER,
hwIfDiffServServiceClass
INTEGER,
hwIfDiffServColor
INTEGER
}
hwIfDiffServIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The index of L2 interface. "
::= { hwIfDiffServEntry 1 }
hwIfDiffServMode OBJECT-TYPE
SYNTAX INTEGER
{
pipe(1),
uniform(2),
shortpipe(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Different service mode of the interface binding to a
VLL, default is uniform."
::= { hwIfDiffServEntry 2 }
hwIfDiffServServiceClass OBJECT-TYPE
SYNTAX INTEGER {
default(0),
be(1),
af1(2),
af2(3),
af3(4),
af4(5),
ef(6),
cs6(7),
cs7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PHB in the ingress PE, the value must be
be,af1,af2,af3,af4,ef,cs6,cs7."
::= { hwIfDiffServEntry 3 }
hwIfDiffServColor OBJECT-TYPE
SYNTAX INTEGER
{
default(0),
green(1),
yellow(2),
red(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remarked color of packet in the ingress
PE, the value must be green,yellow,red."
::= { hwIfDiffServEntry 4 }
-- ===========================================================================
-- ifname 4K VRF
-- ============================================================================
hwIfQuery OBJECT IDENTIFIER ::= { hwIFExtObjects 12 }
hwIfQueryTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIfQueryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface name table of private MIB."
::= { hwIfQuery 1 }
hwIfQueryEntry OBJECT-TYPE
SYNTAX HwIfQueryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of private interface name table."
INDEX { hwIfName }
::= { hwIfQueryTable 1 }
HwIfQueryEntry ::=
SEQUENCE {
hwIfName
OCTET STRING,
hwIfIndex
InterfaceIndex
}
hwIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..47))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the interface.The value of this object must
be the interface name assigned by the local device."
::= { hwIfQueryEntry 1 }
hwIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the interface. An index uniquely identifies
an interface."
::= { hwIfQueryEntry 2 }
-- ----------------------------------------------------------------------------
-- Logic interface attribute Group
-- ----------------------------------------------------------------------------
hwLogicIfAttrib OBJECT IDENTIFIER ::= { hwIFExtObjects 13 }
hwLogicIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwLogicIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logic interface table."
::= { hwLogicIfAttrib 1 }
hwLogicIfEntry OBJECT-TYPE
SYNTAX HwLogicIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logic interface table."
INDEX { hwLogicIfIndex }
::= { hwLogicIfTable 1 }
HwLogicIfEntry ::=
SEQUENCE {
hwLogicIfIndex
InterfaceIndexOrZero,
hwLogicIfMainIndex
InterfaceIndexOrZero,
hwLogicIfType
INTEGER,
hwLogicIfName
DisplayString,
hwLogicIfParaOne
INTEGER ,
hwLogicIfRowStatus
RowStatus
}
hwLogicIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the interface index. The interface index to be created must be 0. Then the system automatically allocates an interface index."
::= { hwLogicIfEntry 1 }
hwLogicIfMainIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the interface index of the main interface to which the sub-interface belongs. For other interfaces, the interface index is 0."
::= { hwLogicIfEntry 11 }
hwLogicIfType OBJECT-TYPE
SYNTAX INTEGER
{
ve(1),
loopback(2),
vlanif(3),
subVe(4),
subEthTrunk(5),
subEthernet(6),
subAtm(7),
imaGroup(8),
subImaGroup(9),
subSerial(10),
tunnel(11),
mpGroup(13),
bridgeIf(14),
subAtmTrunk(15),
dslGroup(16),
wlanEss(17),
stackPort(18)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the interface type."
::= { hwLogicIfEntry 12 }
hwLogicIfName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the interface name. The interface name must be a name without blank spaces and Tab characters."
::= { hwLogicIfEntry 13 }
hwLogicIfParaOne OBJECT-TYPE
SYNTAX INTEGER
{
p2p(1),
p2mp(2),
none(255)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the extended attribute of the logical interface. The extended attribute takes effect only on the ATM sub-interface. The default extended attribute is P2MP. For sub-interfaces of other types, none is returned after the Get operation."
::= { hwLogicIfEntry 14 }
hwLogicIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the status of the row."
::= { hwLogicIfEntry 51 }
-- ----------------------------------------------------------------------------
-- Logic interface help attribute Group
-- ----------------------------------------------------------------------------
hwLogicIfHelpTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwLogicIfHelpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logic interface help table."
::= { hwLogicIfAttrib 2 }
hwLogicIfHelpEntry OBJECT-TYPE
SYNTAX HwLogicIfHelpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logic interface help table."
INDEX { hwLogicIfhelpType }
::= { hwLogicIfHelpTable 1 }
HwLogicIfHelpEntry ::=
SEQUENCE {
hwLogicIfhelpType
INTEGER,
hwLogicIfChassisNumber
OCTET STRING,
hwLogicIfSlotNumber
OCTET STRING,
hwLogicIfCardNumber
OCTET STRING,
hwLogicIfMin
Integer32,
hwLogicIfMax
Integer32,
hwLogicIfTotal
Integer32
}
hwLogicIfhelpType OBJECT-TYPE
SYNTAX INTEGER
{
ve(1),
ima-Group(8),
tunnel(11),
mp-group(13),
dslGroup(16)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the types of logical interfaces that can be queried."
::= { hwLogicIfHelpEntry 1 }
hwLogicIfChassisNumber OBJECT-TYPE
SYNTAX OCTET STRING(SIZE (1..2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the ID of the chassis that supports the creation of the specified logical interface."
::= { hwLogicIfHelpEntry 2 }
hwLogicIfSlotNumber OBJECT-TYPE
SYNTAX OCTET STRING(SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the ID of the slot that supports the creation of the specified logical interface."
::= { hwLogicIfHelpEntry 3 }
hwLogicIfCardNumber OBJECT-TYPE
SYNTAX OCTET STRING(SIZE (1..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of the card that supports the creation of the specified logical interface."
::= { hwLogicIfHelpEntry 4 }
hwLogicIfMin OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the minimum port number of the specified logical interface."
::= { hwLogicIfHelpEntry 5 }
hwLogicIfMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the maximum port number of the specified logical interface."
::= { hwLogicIfHelpEntry 6 }
hwLogicIfTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the maximum number of the specified logical interface."
::= { hwLogicIfHelpEntry 7 }
-- ----------------------------------------------------------------------------
-- Logic interface dynamic help attribute Group
-- ----------------------------------------------------------------------------
hwLogicIfDynamicHelpTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwLogicIfDynamicHelpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logic interface dynamic help table."
::= { hwLogicIfAttrib 3 }
hwLogicIfDynamicHelpEntry OBJECT-TYPE
SYNTAX HwLogicIfDynamicHelpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logic interface dynamic help table."
INDEX { hwLogicDynamicIfhelpType,
hwLogicDynamicIfChassisNumber,
hwLogicDynamicIfSlotNumber,
hwLogicDynamicIfCardNumber
}
::= { hwLogicIfDynamicHelpTable 1 }
HwLogicIfDynamicHelpEntry ::=
SEQUENCE {
hwLogicDynamicIfhelpType
INTEGER,
hwLogicDynamicIfChassisNumber
Integer32,
hwLogicDynamicIfSlotNumber
Integer32,
hwLogicDynamicIfCardNumber
Integer32,
hwLogicDynamicIfMin
Integer32,
hwLogicDynamicIfMax
Integer32,
hwLogicDynamicIfTotal
Integer32
}
hwLogicDynamicIfhelpType OBJECT-TYPE
SYNTAX INTEGER
{
ve(1),
ima-Group(8),
tunnel(11),
mp-group(13),
dslGroup(16)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the types of logical interfaces that can be queried."
::= { hwLogicIfDynamicHelpEntry 1 }
hwLogicDynamicIfChassisNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the ID of the chassis that that can be queried."
::= { hwLogicIfDynamicHelpEntry 2 }
hwLogicDynamicIfSlotNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the ID of the slot that can be queried."
::= { hwLogicIfDynamicHelpEntry 3 }
hwLogicDynamicIfCardNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the ID of the card that can be queried."
::= { hwLogicIfDynamicHelpEntry 4 }
hwLogicDynamicIfMin OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the minimum port number of the specified logical interface."
::= { hwLogicIfDynamicHelpEntry 5 }
hwLogicDynamicIfMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the maximum port number of the specified logical interface."
::= { hwLogicIfDynamicHelpEntry 6 }
hwLogicDynamicIfTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the maximum number of the specified logical interface."
::= { hwLogicIfDynamicHelpEntry 7 }
-- ============================================================================
-- cpu packet statistic table
-- ============================================================================
hwCppsObjects OBJECT IDENTIFIER ::= { hwIFExtObjects 14 }
hwCppsGlobalEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether statistic function is enabled globally, and the default value is disable."
::= { hwCppsObjects 1 }
-- ======================= Cpps interface table =========================
hwCppsInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCppsInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "CPU packet and byte statistic interface configuration table."
::= { hwCppsObjects 2 }
hwCppsInterfaceEntry OBJECT-TYPE
SYNTAX HwCppsInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of hwCppsInterfaceTable."
INDEX { hwCppsInterfaceIndex }
::= { hwCppsInterfaceTable 1}
HwCppsInterfaceEntry ::=
SEQUENCE {
hwCppsInterfaceIndex InterfaceIndex ,
hwCppsPortPvcEnable EnabledStatus ,
hwCppsPortVlanEnable EnabledStatus
}
hwCppsInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index number of the interface."
::= { hwCppsInterfaceEntry 1 }
hwCppsPortPvcEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether statistic function is enabled on PVC."
DEFVAL { disable }
::= { hwCppsInterfaceEntry 2 }
hwCppsPortVlanEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether statistic function is enabled on VLAN."
DEFVAL { disable }
::= { hwCppsInterfaceEntry 3 }
-- ======================= Cpps interface statistics table =========================
hwCppsIfStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCppsIfStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "CPU packet and byte statistic interface table."
::= { hwCppsObjects 3 }
hwCppsIfStatisticsEntry OBJECT-TYPE
SYNTAX HwCppsIfStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of hwCppsIfStatisticsTable."
INDEX { hwCppsIfStatisticsIndex }
::= { hwCppsIfStatisticsTable 1}
HwCppsIfStatisticsEntry ::=
SEQUENCE {
hwCppsIfStatisticsIndex InterfaceIndex ,
hwCppsInterfacePktStatisic Counter64 ,
hwCppsInterfaceByteStatisic Counter64 ,
hwCppsResetInterfaceStatisic INTEGER
}
hwCppsIfStatisticsIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index number of the interface."
::= { hwCppsIfStatisticsEntry 1 }
hwCppsInterfacePktStatisic OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Packet statistic information of the interface sent to CPU."
::= { hwCppsIfStatisticsEntry 2 }
hwCppsInterfaceByteStatisic OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Byte statistic information of the interface sent to CPU."
::= { hwCppsIfStatisticsEntry 3 }
hwCppsResetInterfaceStatisic OBJECT-TYPE
SYNTAX INTEGER{
reset(1),
unreset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether to reset statistics."
DEFVAL { 2 }
::= { hwCppsIfStatisticsEntry 4 }
-- ======================= Cpps ATM+pvc table =========================
hwCppsAtmPvcTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCppsAtmPvcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "CPU packet and byte statistic ATM PVC table."
::= { hwCppsObjects 4 }
hwCppsAtmPvcEntry OBJECT-TYPE
SYNTAX HwCppsAtmPvcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of hwCppsAtmPvcTable."
INDEX { hwCppsAtmIfIndex, hwCppsAtmVpi, hwCppsAtmVci }
::= { hwCppsAtmPvcTable 1}
HwCppsAtmPvcEntry ::=
SEQUENCE {
hwCppsAtmIfIndex InterfaceIndex ,
hwCppsAtmVpi AtmVpIdentifier ,
hwCppsAtmVci AtmVcIdentifier ,
hwCppsAtmPvcPktStatisic Counter64 ,
hwCppsAtmPvcByteStatisic Counter64 ,
hwCppsResetAtmPvcStatisic INTEGER
}
hwCppsAtmIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index number of the interface."
::= { hwCppsAtmPvcEntry 1 }
hwCppsAtmVpi OBJECT-TYPE
SYNTAX AtmVpIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "VPI."
::= { hwCppsAtmPvcEntry 2 }
hwCppsAtmVci OBJECT-TYPE
SYNTAX AtmVcIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "VCI."
::= { hwCppsAtmPvcEntry 3 }
hwCppsAtmPvcPktStatisic OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Packet statistic information of the PVC sent to CPU."
::= { hwCppsAtmPvcEntry 4 }
hwCppsAtmPvcByteStatisic OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Byte statistic information of the PVC sent to CPU."
::= { hwCppsAtmPvcEntry 5 }
hwCppsResetAtmPvcStatisic OBJECT-TYPE
SYNTAX INTEGER{
reset(1),
unreset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether to reset statistics."
DEFVAL { 2 }
::= { hwCppsAtmPvcEntry 6 }
-- ======================= Cpps port+vlan table =========================
hwCppsPortVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCppsPortVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "CPU packet and byte statistic port VLAN table."
::= { hwCppsObjects 5 }
hwCppsPortVlanEntry OBJECT-TYPE
SYNTAX HwCppsPortVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of hwCppsPortVlanTable."
INDEX { hwCppsPortIndex, hwCppsVlanId }
::= { hwCppsPortVlanTable 1}
HwCppsPortVlanEntry ::=
SEQUENCE {
hwCppsPortIndex InterfaceIndex ,
hwCppsVlanId VlanIdOrNone ,
hwCppsPortVlanPktStatisic Counter64 ,
hwCppsPortVlanByteStatisic Counter64 ,
hwCppsResetPortVlanStatisic INTEGER
}
hwCppsPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index number of the interface."
::= { hwCppsPortVlanEntry 1 }
hwCppsVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "VLAN ID."
::= { hwCppsPortVlanEntry 2 }
hwCppsPortVlanPktStatisic OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Packet statistic information of the port sent to CPU."
::= { hwCppsPortVlanEntry 3 }
hwCppsPortVlanByteStatisic OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Byte statistic information of the port sent to CPU."
::= { hwCppsPortVlanEntry 4 }
hwCppsResetPortVlanStatisic OBJECT-TYPE
SYNTAX INTEGER{
reset(1),
unreset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether to reset statistics."
DEFVAL { 2 }
::= { hwCppsPortVlanEntry 5 }
-- ----------------------------------------------------------------------------
-- PortIsolation Group
-- ----------------------------------------------------------------------------
hwPortIsolationGroupAttrib OBJECT IDENTIFIER ::= { hwIFExtObjects 15 }
hwPortIsolationGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPortIsolationGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logic interface table."
::= { hwPortIsolationGroupAttrib 1 }
hwPortIsolationGroupEntry OBJECT-TYPE
SYNTAX HwPortIsolationGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logic interface table."
INDEX { hwPortIsolationGroupIndex }
::= { hwPortIsolationGroupTable 1 }
HwPortIsolationGroupEntry ::=
SEQUENCE {
hwPortIsolationGroupIndex
Integer32 (0..63),
hwPortIsolationGroupPortList
PortList,
hwPortIsolationGroupRowStatus
RowStatus
}
hwPortIsolationGroupIndex OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ID of Port-Isolation-Group."
::= { hwPortIsolationGroupEntry 1 }
hwPortIsolationGroupPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"PortList of Port-Isolation-Group."
::= { hwPortIsolationGroupEntry 2 }
hwPortIsolationGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the status of the row."
::= { hwPortIsolationGroupEntry 3 }
-- ============================================================================
-- interface vtrunk attribute group
-- ============================================================================
hwVTrunkAttr OBJECT IDENTIFIER ::= { hwIFExtObjects 16 }
hwVTrunkIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwVTrunkIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vtrunk table."
::= { hwVTrunkAttr 1 }
hwVTrunkIfEntry OBJECT-TYPE
SYNTAX HwVTrunkIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the vtrunk table."
INDEX { hwVTrunkIfIndex }
::= { hwVTrunkIfTable 1 }
HwVTrunkIfEntry ::=
SEQUENCE {
hwVTrunkIfIndex
InterfaceIndex,
hwVTrunkIfID
Integer32,
hwVTrunkIfType
INTEGER,
hwVTrunkIfRowStatus
RowStatus
}
hwVTrunkIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The IfIndex of the VTrunk interface."
::= { hwVTrunkIfEntry 1 }
hwVTrunkIfID OBJECT-TYPE
SYNTAX Integer32(0..511)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The identification of the VTrunk interface.It may identify VTrunk
and is an index of the interface."
::= { hwVTrunkIfEntry 2 }
hwVTrunkIfType OBJECT-TYPE
SYNTAX INTEGER
{
pos-Trunk(1),
cpos-Trunk(2),
atm-Trunk(3),
atm-bundle(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The type of the VTrunk interface includes pos-Trunk, cpos-Trunk, atm-trunk
and atm-bundle."
::= { hwVTrunkIfEntry 3 }
hwVTrunkIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Current operation status of the row."
::= { hwVTrunkIfEntry 50 }
-- ----------------------------------------------------------------------------
-- VTrunk member attribute Group
-- ----------------------------------------------------------------------------
hwVTrunkMemAttr OBJECT IDENTIFIER ::= { hwIFExtObjects 17 }
hwVTrunkMemTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwVTrunkMemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VTrunk member attribute information table."
::= { hwVTrunkMemAttr 1 }
hwVTrunkMemEntry OBJECT-TYPE
SYNTAX HwVTrunkMemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VTrunk member attribute information."
INDEX { hwVTrunkMemIfIndex }
::= { hwVTrunkMemTable 1 }
HwVTrunkMemEntry ::=
SEQUENCE {
hwVTrunkMemIfIndex
Integer32,
hwVTrunkIfnetIndex
Integer32,
hwVTrunkValidEntry
INTEGER,
hwVTrunkOperstatus
INTEGER,
hwVTrunkPortActive
INTEGER,
hwVTrunkRowStatus
RowStatus
}
hwVTrunkMemIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VTrunk port index."
::= { hwVTrunkMemEntry 1 }
hwVTrunkIfnetIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IfnetIndex of the VTrunk interface."
::= { hwVTrunkMemEntry 2 }
hwVTrunkValidEntry OBJECT-TYPE
SYNTAX INTEGER
{
valid(1),
invalid(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid Entries of VTrunk interface."
::= { hwVTrunkMemEntry 3 }
hwVTrunkOperstatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of operation, indicates port status. There are vtrunk_up(1)
and vtrunk_down(2).It expresses whether port is shutdown."
::= { hwVTrunkMemEntry 4 }
hwVTrunkPortActive OBJECT-TYPE
SYNTAX INTEGER
{
portInactive(1),
portActive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Active port of backup-access vtrunk or not
1: portInactive
2: portActive."
::= { hwVTrunkMemEntry 5 }
hwVTrunkRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Current operation status of the row. "
::= { hwVTrunkMemEntry 50 }
-- ----------------------------------------------------------------------------
-- SubInterfaceBackupTrunk attribute Group
-- ----------------------------------------------------------------------------
hwMasterBackupTrunkSubinterfaceAttr OBJECT IDENTIFIER ::= { hwIFExtObjects 18 }
hwMasterBackupTrunkSubinterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMasterBackupTrunkSubinterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Master-Backup Trunk Subinterface attribute information table."
::= { hwMasterBackupTrunkSubinterfaceAttr 1 }
hwMasterBackupTrunkSubinterfaceEntry OBJECT-TYPE
SYNTAX HwMasterBackupTrunkSubinterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Master-Backup Trunk Subinterface attribute information."
INDEX { hwBackupTrunkIfIndex }
::= { hwMasterBackupTrunkSubinterfaceTable 1 }
HwMasterBackupTrunkSubinterfaceEntry ::=
SEQUENCE {
hwBackupTrunkIfIndex
InterfaceIndex,
hwBackupStatus
INTEGER,
hwRevertiveMode
INTEGER,
hwWtrTime
Integer32,
hwFlushVlanId
VlanIdOrNone
}
hwBackupTrunkIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates index of master/backup trunk sub-interface."
::= { hwMasterBackupTrunkSubinterfaceEntry 1 }
hwBackupStatus OBJECT-TYPE
SYNTAX INTEGER
{
init(1),
master(2),
backup(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies backupStatus of master/backup trunk sub-interface."
::= { hwMasterBackupTrunkSubinterfaceEntry 2 }
hwRevertiveMode OBJECT-TYPE
SYNTAX INTEGER
{
revertive(1),
non-revertive(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies revertive-mode of master/backup trunk sub-interface."
DEFVAL { revertive }
::= { hwMasterBackupTrunkSubinterfaceEntry 3 }
hwWtrTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the wait-to-restore time of master/backup trunk sub-interface."
DEFVAL { 0 }
::= { hwMasterBackupTrunkSubinterfaceEntry 4 }
hwFlushVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates VLAN ID carried in a FlushPDU."
DEFVAL { 0 }
::= { hwMasterBackupTrunkSubinterfaceEntry 5 }
hwVaspPort OBJECT IDENTIFIER ::= { hwIFExtObjects 19 }
hwVaspPortPeerMacTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwVaspPortPeerMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Vasp port peer MAC table."
::= { hwVaspPort 1 }
hwVaspPortPeerMacEntry OBJECT-TYPE
SYNTAX HwVaspPortPeerMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Vasp port peer MAC table entry."
INDEX { hwVaspPortIfIndex }
::= { hwVaspPortPeerMacTable 1 }
HwVaspPortPeerMacEntry ::=
SEQUENCE {
hwVaspPortIfIndex
InterfaceIndex,
hwVaspPortName
DisplayString,
hwVaspPortPeerMac
PhysAddress
}
hwVaspPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of interface."
::= { hwVaspPortPeerMacEntry 1 }
hwVaspPortName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of vasp port."
::= { hwVaspPortPeerMacEntry 2 }
hwVaspPortPeerMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer MAC of port."
::= { hwVaspPortPeerMacEntry 3 }
hwIFExtTrapObjects OBJECT IDENTIFIER ::= { hwIFExtObjects 20 }
hwLinkDownReason OBJECT-TYPE
SYNTAX INTEGER {
physicalLinkDown(1), -- interface phycial link down
lacpNegotiationFailed(2), -- LACP negotiation failed
receiveConfReqPacket(3), -- receive ConfReq packet
receiveConfAckPacket(4), -- receive ConfAck packet
receiveNakPacket(5), -- receive Nak packet
receiveTermPacket(6), -- receive Term packet
receiveTermAckPacket(7), -- receive TermAck packet
receiveCodeRejPacket(8), -- receive CodeRej packet
receiveProtoRejPacket(9), -- receive ProtoRej packet
chapAuthenticationFailed(10), -- CHAP authentication failed
papAuthenticationFailed(11), -- PAP authentication failed
keepaliveOutOfTime(12), -- Keepalive out of time
pvcDown(13), -- PVC down
efmSessionFailed(14), -- EFM session failed
tunnelDownOrInexist(15), -- tunnel down or tunnel not exist
admindown(16), -- shutdown
protocoldown(17), -- protocol down
adminup(18), -- undo shutdown
protocolup(19), -- protocol up
mainifdown(20), -- main interface down
physicalLinkIsUp(21), -- Interface physical link is Up
conditionsForActivationNotMet(22), -- The conditions for the activation of the interface are not met
conditionsForActivationAreMet(23), -- The conditions for the activation of the interface are met
tunnelIsUp(24), -- The tunnel is Up
interfaceIsDeleted(25), -- The interface is deleted
bfdSessionDown(26), -- bfd session is down
bfdSessionUp(27), -- bfd session is up
efmSessionUp(28), -- efm session is up
portAlarmDown(29), -- port alarm down
dldpIsDown(30), -- dldp down
dldpIsUp(31), -- dldp up
vrrpFlowDown(32), -- vrrp flow down
vrrpFlowUp(33) -- vrrp flow up
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The reason code of link changes."
::= { hwIFExtTrapObjects 1 }
hwMainIfName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
" The main interface name."
::= { hwIFExtTrapObjects 2 }
hwCfmOverPhysicalName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The configuration of the interface board or interface card is restored."
::= { hwIFExtTrapObjects 3 }
-- ============================================================================
hwIFExtConformance OBJECT IDENTIFIER ::= { hwIFExtMib 2 }
hwIFExtGroups OBJECT IDENTIFIER ::= { hwIFExtConformance 1 }
-- hwIFExtTraps OBJECT IDENTIFIER ::= { hwIFExtMib 2 }
-- hwIFExtConformance OBJECT IDENTIFIER ::= { hwIFExtMib 3 }
-- hwIFExtCompliances OBJECT IDENTIFIER ::= { hwIFExtConformance 1 }
-- ============================================================================
hwTrunkIfGroup OBJECT-GROUP
OBJECTS { hwIFExtPhyStatus, hwIFExtMemberOf, hwTrunkIfMax, hwTrunkNextIndex, hwTrunkIndex, hwTrunkIfID, hwTrunkIfType,
hwTrunkIfIndex, hwTrunkIfModel, hwTrunkIfBandWidthAffectLinkNum, hwTrunkIfMinLinkNum, hwTrunkIfRowStatus,
hwTrunkIfWorkingMode, hwTrunkIfWorkingState, hwTrunkIfAutoRecover, hwTrunkIfPreemptEnable, hwTrunkIfPreemptDelay,
hwTrunkIfTimeoutReceive, hwTrunkBandwidth, hwTrunkIfFlushSendEnable, hwTrunkIfFlushVlanId, hwTrunkIfFlushPasswd, hwTrunkIfForceSwitchEnable,
hwTrunkIfStatReset, hwTrunkIfLagSelectedPortStd, hwTrunkIfLagMaxActiveLinkNum, hwTrunkETrunkPriority, hwTrunkETrunkSysID,hwTrunkETrunkPriorityReset,
hwTrunkETrunkSysIDReset,hwTrunkLocalPrefMode, hwTrunkIfTrackVrrpVrid, hwTrunkIfTrackVrrpIfIndex, hwTrunkIfTrackVrrpReset }
STATUS current
DESCRIPTION
"A collection of objects indicating information of IP address of interface,
contain IP address, IP address mask and IP address acquiring method."
::= { hwIFExtGroups 1 }
hwIfIpAddressGroup OBJECT-GROUP
OBJECTS { hwIpAdEntAddr, hwIpAdEntIfIndex, hwIpAdEntNetMask, hwIpAdEntBcastAddr, hwIpAdEntReasmMaxSize,
hwIpAdEntAddressType, hwIfIpMethod, hwIpAdEntAddrStatus }
STATUS current
DESCRIPTION
"A collection of objects indicating attribute of the Trunk interface."
::= { hwIFExtGroups 2 }
-- hwIFExtHoldTime ,
hwIFExtGroup OBJECT-GROUP
OBJECTS { hwIFExtLayer, hwIFExtFrameType, hwIFExtFlowStatInterval, hwIFExtFlushReceiveEnable, hwIFExtFlushVlanId,
hwIFExtFlushPasswd, hwTrunkSystemPriority, hwTrunkUnknownUnicastIfModel,
hwTrunkETrunkSystemPriority, hwTrunkETrunkSystemID, hwIFExtFlowStatus,
hwIFExtMtu,hwIFExtMacAddr, hwIFExtBlockPriority, hwIFExtMacShift,hwIFExtSuppressStatus}
STATUS current
DESCRIPTION
"A collection of objects indicating attribute of interface extended."
::= { hwIFExtGroups 3 }
hwTrunkMemGroup OBJECT-GROUP
OBJECTS { hwTrunkMemifIndex, hwTrunkValidEntry, hwTrunkSelectStatus, hwTrunkLacpStatus, hwTrunkDeleteFlag,
hwTrunkOperstatus, hwTrunkIsDefaultLagRecv, hwTrunkPortWeight, hwTrunkPortStandby, hwTrunkPortMaster,
hwTrunkPortPriority, hwTrunkPortStatReset, hwTrunkRowStatus }
STATUS current
DESCRIPTION
"Trunk member attribute Group, now only can set hwTrunkPortWeight and hwTrunkPortStandby. hwTrunkSelectStatus and hwTrunkDeleteFlag can't be set. These attributes are for extend."
::= { hwIFExtGroups 4 }
hwIFFlowStatGroup OBJECT-GROUP
OBJECTS { hwIFFlowStatGlobalInterval }
STATUS current
DESCRIPTION
"A collection of objects indicating interval time of interface flow stat."
::= { hwIFExtGroups 5 }
hwAdminVrrpMemberIfGroup OBJECT-GROUP
OBJECTS {
hwIfFlowChangeTime,
hwAdminVrrpVrid,
hwAdminVrrpIfIndex,
hwAdminVrrpMemberIfFlowStatus,
hwAdminVrrpMemberIfRowStatus
}
STATUS obsolete
DESCRIPTION
"A collection of objects indicating attribute of the interface track administrator VRRP."
::= { hwIFExtGroups 6 }
hwIfEtherStatGroup OBJECT-GROUP
OBJECTS { hwIfEtherStatInPkts64Octets, hwIfEtherStatInPkts65to127Octets, hwIfEtherStatInPkts128to255Octets, hwIfEtherStatInPkts256to511Octets,
hwIfEtherStatInPkts512to1023Octets, hwIfEtherStatInPkts1024to1518Octets,
hwIfEtherStatInJumboPkts, hwIfEtherStatInCRCPkts, hwIfEtherStatInLongPkts, hwIfEtherStatInJabberPkts, hwIfEtherStatInFragmentPkts,
hwIfEtherStatInUnderSizePkts, hwIfEtherStatInOverRunPkts, hwIfEtherStatInPausePkts, hwIfEtherStatOutJumboPkts, hwIfEtherStatOutOverflowPkts,
hwIfEtherStatOutUnderRunPkts, hwIfEtherStatOutPausePkts, hwIfEthIfStatReset, hwIfEtherStatInDropEventPkts, hwIfEtherStatInAlignmentPkts, hwIfEtherStatInSymbolPkts,
hwIfEtherStatInIgnoredPkts, hwIfEtherStatInFramePkts, hwIfEtherStatOutCollisionPkts, hwIfEtherStatOutDeferredPkts, hwIfEtherStatOutLateCollisionPkts,
hwIfEtherStatOutExcessiveCollisionPkts, hwIfEtherStatOutBufferPurgationPkts }
STATUS current
DESCRIPTION
"Interface statistic Group."
::= { hwIFExtGroups 7 }
hwIFExtCompliances OBJECT IDENTIFIER ::= { hwIFExtConformance 2 }
hwIfMonitorThresholdGroup OBJECT-GROUP
OBJECTS{
hwIfMonitorCrcErrorStatistics ,
hwIfMonitorCrcErrorThreshold ,
hwIfMonitorCrcErrorInterval ,
hwIfMonitorSdhErrorStatistics ,
hwIfMonitorSdhErrorThreshold ,
hwIfMonitorSdhErrorInterval ,
hwIfMonitorInputRatePercentage ,
hwIfMonitorInputRateThreshold ,
hwIfMonitorOutputRatePercentage ,
hwIfMonitorOutputRateThreshold,
hwIfMonitorPauseFrameStatistics,
hwIfMonitorPauseFrameThreshold,
hwIfMonitorPauseFrameInterval,
hwIfMonitorDelayValue,
hwIfMonitorDelayThreshold,
hwIfMonitorJitterValue,
hwIfMonitorJitterThreshold,
hwIfMonitorSdhB1ErrorStatistics,
hwIfMonitorSdhB1ErrorThreshold,
hwIfMonitorSdhB1ErrorInterval,
hwIfMonitorSdhB2ErrorStatistics,
hwIfMonitorSdhB2ErrorThreshold,
hwIfMonitorSdhB2ErrorInterval,
hwIfMonitorSymbolErrorStatistics,
hwIfMonitorSymbolErrorThreshold,
hwIfMonitorSymbolErrorInterval,
hwIfMonitorBadBytesErrorStatistics,
hwIfMonitorBadBytesErrorThreshold,
hwIfMonitorBadBytesErrorInterval
}
STATUS current
DESCRIPTION
"Alarm Monitor Group."
::= { hwIFExtGroups 8 }
hwIfMonitorGeneralGroup OBJECT-GROUP
OBJECTS{
hwIfMonitorCrcEnabledStatus ,
hwIfMonitorSdhEnabledStatus ,
hwIfMonitorInputRateEnabledStatus ,
hwIfMonitorOutputRateEnabledStatus ,
hwIfMonitorHalfDuplexEnabledStatus,
hwIfMonitorPauseRisingEnabledStatus,
hwIfMonitorPauseContinuingEnabledStatus,
hwifMonitorBadBytesEnabledStatus
}
STATUS current
DESCRIPTION
"Alarm Monitor Enable Group."
::= { hwIFExtGroups 9 }
hwIfFluxLimitGroup OBJECT-GROUP
OBJECTS{
hwIfFluxDirection ,
hwIfFluxLimitType ,
hwIfFluxCir,
hwIfFluxCbs,
hwIfFluxRowStatus
}
STATUS current
DESCRIPTION
"Flux limit Group."
::= { hwIFExtGroups 10 }
hwIfDiffServGroup OBJECT-GROUP
OBJECTS{
hwIfDiffServMode,
hwIfDiffServServiceClass,
hwIfDiffServColor
}
STATUS current
DESCRIPTION
"Interface statistic Group."
::= { hwIFExtGroups 11 }
hwIfQueryGroup OBJECT-GROUP
OBJECTS{
hwIfIndex
}
STATUS current
DESCRIPTION
"Interface name Group."
::= { hwIFExtGroups 12 }
hwLogicIfAttrGroup OBJECT-GROUP
OBJECTS{
hwLogicIfMainIndex,
hwLogicIfType,
hwLogicIfName,
hwLogicIfParaOne,
hwLogicIfRowStatus
}
STATUS current
DESCRIPTION
"Logic interface table Group."
::= { hwIFExtGroups 13 }
hwIfIpUnnumberedGroup OBJECT-GROUP
OBJECTS{
hwLendIfIndex,
hwLendIpAddr,
hwLendIpAddrNetMask,
hwUnnumberedRowStatus
}
STATUS current
DESCRIPTION
"Logic interface table Group."
::= { hwIFExtGroups 14 }
hwLinkModeChangeAutoCreateIfGroup OBJECT-GROUP
OBJECTS{
hwNewIfTimeslot
}
STATUS current
DESCRIPTION
"Interface time slot Group."
::= { hwIFExtGroups 15 }
hwCppsGlobalEnableGroup OBJECT-GROUP
OBJECTS { hwCppsGlobalEnable }
STATUS current
DESCRIPTION
"A collection of objects indicating global CPU packet statistic function."
::= { hwIFExtGroups 16 }
hwCppsInterfaceGroup OBJECT-GROUP
OBJECTS {
hwCppsPortPvcEnable ,
hwCppsPortVlanEnable
}
STATUS current
DESCRIPTION
"A collection of objects providing interface configuration function."
::= { hwIFExtGroups 17 }
hwCppsIfStatisticsGroup OBJECT-GROUP
OBJECTS {
hwCppsInterfacePktStatisic ,
hwCppsInterfaceByteStatisic ,
hwCppsResetInterfaceStatisic
}
STATUS current
DESCRIPTION
"A collection of objects providing packet and byte statistic of the interface sent to CPU."
::= { hwIFExtGroups 18 }
hwCppsAtmPvcGroup OBJECT-GROUP
OBJECTS {
hwCppsAtmPvcPktStatisic ,
hwCppsAtmPvcByteStatisic ,
hwCppsResetAtmPvcStatisic
}
STATUS current
DESCRIPTION
"A collection of objects providing packet and byte statistic for the pvc sent to CPU."
::= { hwIFExtGroups 19 }
hwCppsPortVlanGroup OBJECT-GROUP
OBJECTS {
hwCppsPortVlanPktStatisic ,
hwCppsPortVlanByteStatisic ,
hwCppsResetPortVlanStatisic
}
STATUS current
DESCRIPTION
"A collection of objects providing packet and byte statistic for the port sent to CPU."
::= { hwIFExtGroups 20 }
hwPortIsolationGroup OBJECT-GROUP
OBJECTS {
hwPortIsolationGroupPortList ,
hwPortIsolationGroupRowStatus
}
STATUS current
DESCRIPTION
"Port Isolation Group."
::= { hwIFExtGroups 21 }
hwVTrunkIfGroup OBJECT-GROUP
OBJECTS { hwVTrunkIfIndex, hwVTrunkIfID, hwVTrunkIfType, hwVTrunkIfRowStatus }
STATUS current
DESCRIPTION
"VTrunk attribute Group."
::= { hwIFExtGroups 22 }
hwVTrunkMemGroup OBJECT-GROUP
OBJECTS { hwVTrunkMemIfIndex, hwVTrunkValidEntry, hwVTrunkOperstatus, hwVTrunkPortActive, hwVTrunkRowStatus }
STATUS current
DESCRIPTION
"VTrunk member attribute Group."
::= { hwIFExtGroups 23 }
hwLogicIfHelpTableGroup OBJECT-GROUP
OBJECTS{
hwLogicIfhelpType,
hwLogicIfChassisNumber,
hwLogicIfSlotNumber,
hwLogicIfCardNumber,
hwLogicIfMin,
hwLogicIfMax,
hwLogicIfTotal
}
STATUS current
DESCRIPTION
"Logic interface help table Group."
::= { hwIFExtGroups 24 }
hwSubInterfaceBackupTrunkGroup OBJECT-GROUP
OBJECTS { hwBackupStatus, hwRevertiveMode, hwWtrTime, hwFlushVlanId }
STATUS current
DESCRIPTION
"SubInterfaceBackupTrunk attribute Group."
::= { hwIFExtGroups 25 }
hwVaspPortGroup OBJECT-GROUP
OBJECTS { hwVaspPortName, hwVaspPortPeerMac }
STATUS current
DESCRIPTION
"The vasp port group."
::= { hwIFExtGroups 26 }
hwLogicIfDynamicHelpTableGroup OBJECT-GROUP
OBJECTS{
hwLogicDynamicIfhelpType,
hwLogicDynamicIfChassisNumber,
hwLogicDynamicIfSlotNumber,
hwLogicDynamicIfCardNumber,
hwLogicDynamicIfMin,
hwLogicDynamicIfMax,
hwLogicDynamicIfTotal
}
STATUS current
DESCRIPTION
"Logic interface Dynamic help table Group."
::= { hwIFExtGroups 27 }
-- ----------------------------------------------------------------------------
-- compliance statements
-- ----------------------------------------------------------------------------
hwIFExtCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities implementing
Huawei extended interface management MIB."
MODULE -- this module
MANDATORY-GROUPS { hwTrunkIfGroup, hwIfIpAddressGroup, hwIFExtGroup, hwTrunkMemGroup, hwIFFlowStatGroup,
hwIfQueryGroup,hwLogicIfAttrGroup, hwVTrunkIfGroup, hwVTrunkMemGroup
}
::= { hwIFExtCompliances 1 }
hwIFExtTraps OBJECT IDENTIFIER ::= { hwIFExtMib 3 }
hwTrunkWorkingSwitch NOTIFICATION-TYPE
OBJECTS { hwTrunkIfID, hwTrunkIfWorkingState }
STATUS current
DESCRIPTION
"hwTrunkWorkingSwitch.
1.hwTrunkIfID: The identification of the Trunk interface;
2.hwTrunkIfWorkingState: Current working state of backup-access trunk.
Index: hwTrunkIndex."
::= { hwIFExtTraps 1 }
hwLacpNegotiateFailed NOTIFICATION-TYPE
OBJECTS { hwTrunkIfID, ifName, ifName }
STATUS current
DESCRIPTION
"The member of LAG neither can take over PDU nor transmit PDUs. Send this trap when LACP protocol negotiation fails.
1.hwTrunkIfID: The identification of the Trunk interface;
2.ifName: It is the name of the trunk in the ifXTable of IF-MIB.
3.ifName: It is the name of the port in the ifXTable of IF-MIB.
Indexes: 1.hwTrunkIndex;
2.ifIndex. "
::= { hwIFExtTraps 2 }
hwLacpTotalLinkLoss NOTIFICATION-TYPE
OBJECTS { hwTrunkIfID, ifName }
STATUS current
DESCRIPTION
"Total loss of link bandwidth: it means that there is no member in the LAG group and the trap of MNCD(Member not Collecting/Distributing) occurs.
1.hwTrunkIfID: The identification of the Trunk interface;
2.ifName: It is in the ifXTable of IF-MIB.
Index: hwTrunkIndex."
::= { hwIFExtTraps 3 }
hwLacpPartialLinkLoss NOTIFICATION-TYPE
OBJECTS { hwTrunkIfID, ifName }
STATUS current
DESCRIPTION
"Part loss of link bandwidth: it means that some members in the LAG group aren't in the working-state,
making the number of ports in working-state smaller than the hwTrunkIfMinLinkNum. The trap of PLL(Partial Link Loss)
will be restrained by the trap of TLL(Total Link Loss).
1.hwTrunkIfID: The identification of the Trunk interface;
2.ifName: It is in the ifXTable of IF-MIB.
Index: hwTrunkIndex."
::= { hwIFExtTraps 4 }
hwIfFlowDown NOTIFICATION-TYPE
OBJECTS { sysUpTime, hwIFExtFlowStatus,ifName }
STATUS current
DESCRIPTION
"This notification indicates the time when the interface's flow status changes
to flow down,and the reason."
::= {hwIFExtTraps 5}
hwIfFlowUp NOTIFICATION-TYPE
OBJECTS { sysUpTime, hwIFExtFlowStatus,ifName }
STATUS current
DESCRIPTION
"This notification indicates the time when the interface's flow status changes
to flow up,and the reason."
::= {hwIFExtTraps 6}
hwIfNameChange NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"When a single-chassis device is upgraded to a multi-chassis device, the interface
information is changed and then the system sends a trap."
::= {hwIFExtTraps 7}
hwIfNameChangeResume NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"When a multi-chassis restore a single-chassis device, the interface information
is changed and then the system sends a trap."
::= {hwIFExtTraps 8}
hwExtLinkDown NOTIFICATION-TYPE
OBJECTS { ifIndex, ifAdminStatus, ifOperStatus, ifDescr, hwIFExtPhyStatus, hwIFExtMemberOf }
STATUS deprecated
DESCRIPTION
"This notification indicates the time when the member interface link status changes
to down.The ifDescr indicates the name of the member interface,the hwIFExtMemberOf indicates
the name of main interface."
::= {hwIFExtTraps 9}
hwExtLinkUp NOTIFICATION-TYPE
OBJECTS { ifIndex, ifAdminStatus, ifOperStatus, ifDescr, hwIFExtPhyStatus, hwIFExtMemberOf }
STATUS deprecated
DESCRIPTION
"This notification indicates the time when the member interface link status changes
to up.The ifDescr indicates the name of the member interface,the hwIFExtMemberOf indicates
the name of main interface."
::= {hwIFExtTraps 10}
hwLoopbackBlock NOTIFICATION-TYPE
OBJECTS { hwIfName }
STATUS current
DESCRIPTION
"This notification indicates block state of the interface."
::= {hwIFExtTraps 11}
hwLoopbackResume NOTIFICATION-TYPE
OBJECTS { hwIfName }
STATUS current
DESCRIPTION
"This notification indicates normal state of the interface."
::= {hwIFExtTraps 12}
hwLacpNegotiateResume NOTIFICATION-TYPE
OBJECTS { hwTrunkIfID, ifName, ifName }
STATUS current
DESCRIPTION
"Negotiation failure alarm is resumed.
1.hwTrunkIfID: The identification of the Trunk interface;
2.ifName: It is the name of the trunk in the ifXTable of IF-MIB.
3.ifName: It is the name of the port in the ifXTable of IF-MIB.
Indexes: 1.hwTrunkIndex;
2.ifIndex. "
::= { hwIFExtTraps 13 }
hwLacpTotalLinkLossResume NOTIFICATION-TYPE
OBJECTS { hwTrunkIfID, ifName }
STATUS current
DESCRIPTION
"Link bandwidth lost totally is resumed.
1.hwTrunkIfID: The identification of the Trunk interface;
2.ifName: It is in the ifXTable of IF-MIB.
Index: hwTrunkIndex."
::= { hwIFExtTraps 14 }
hwLacpPartialLinkLossResume NOTIFICATION-TYPE
OBJECTS { hwTrunkIfID, ifName }
STATUS current
DESCRIPTION
"Link bandwidth lost partly is resumed.
1.hwTrunkIfID: The identification of the Trunk interface;
2.ifName: It is in the ifXTable of IF-MIB.
Index: hwTrunkIndex."
::= { hwIFExtTraps 15 }
hwTrunkSubIfStateToMaster NOTIFICATION-TYPE
OBJECTS { hwIfName, hwBackupStatus }
STATUS current
DESCRIPTION
"This notification indicates BackupState of the Trunk subinterface.
1.hwIfName: The identification of the Trunk subinterface;
2.hwBackupStatus: Current working state of Trunk subinterface."
::= { hwIFExtTraps 24 }
hwTrunkSubIfStateToSlave NOTIFICATION-TYPE
OBJECTS { hwIfName, hwBackupStatus }
STATUS current
DESCRIPTION
"This notification indicates BackupState of the Trunk subinterface.
1.hwIfName: The identification of the Trunk subinterface;
2.hwBackupStatus: Current working state of Trunk subinterface."
::= { hwIFExtTraps 25 }
hwEntityExtCfmOverSlot NOTIFICATION-TYPE
OBJECTS { hwCfmOverPhysicalName }
STATUS current
DESCRIPTION
"The hwEntityExtCfmOverSlot notification will be displayed when the configuration of an interface board is restored. The object hwCfmOverPhysicalName idicates the name of the interface board."
::= { hwIFExtTraps 26 }
hwEntityExtCfmOverCard NOTIFICATION-TYPE
OBJECTS { hwCfmOverPhysicalName }
STATUS current
DESCRIPTION
"The hwEntityExtCfmOverCard notification will be displayed when the configuration of an interface card is restored. The object hwCfmOverPhysicalName idicates the name of the interface card."
::= { hwIFExtTraps 27 }
hwExtAllMemberDownNotify NOTIFICATION-TYPE
OBJECTS { ifName }
STATUS current
DESCRIPTION
"This notification indicates the time when the last member interface link status changes to down.
The ifName indicates the name of the Trunk interface."
::= { hwIFExtTraps 28 }
hwExtAllMemberDownResume NOTIFICATION-TYPE
OBJECTS { ifName }
STATUS current
DESCRIPTION
"This notification indicates the time when the first member interface link status changes to up.
The ifName indicates the name of the Trunk interface."
::= { hwIFExtTraps 29 }
hwIfControlFlapSuppress NOTIFICATION-TYPE
OBJECTS { ifName, hwIFExtSuppressStatus }
STATUS current
DESCRIPTION
" This notification indicates the time when the interface's status changes from unsuppress to suppress. "
::= { hwIFExtTraps 31 }
hwIfControlFlapResume NOTIFICATION-TYPE
OBJECTS { ifName, hwIFExtSuppressStatus }
STATUS current
DESCRIPTION
" This notification indicates the time when the interface's status changes from suppress to unsuppress. "
::= { hwIFExtTraps 32 }
hwExtInterfaceDelete NOTIFICATION-TYPE
OBJECTS { ifIndex, ifDescr}
STATUS current
DESCRIPTION
" This notification indicates the time when the interface was deleted. "
::= { hwIFExtTraps 33 }
hwMonitorNotifications OBJECT IDENTIFIER ::= { hwIFExtMib 4 }
hwIfMonitorCrcErrorRising NOTIFICATION-TYPE
OBJECTS { hwIfMonitorCrcErrorStatistics, hwIfMonitorCrcErrorThreshold,
hwIfMonitorCrcErrorInterval, hwIfMonitorName }
STATUS current
DESCRIPTION
" Crc error alarm notification "
::= { hwMonitorNotifications 1 }
hwIfMonitorCrcErrorResume NOTIFICATION-TYPE
OBJECTS { hwIfMonitorCrcErrorStatistics, hwIfMonitorCrcErrorThreshold,
hwIfMonitorCrcErrorInterval, hwIfMonitorName }
STATUS current
DESCRIPTION
" Crc error alarm resume "
::= { hwMonitorNotifications 2 }
hwIfMonitorSdhErrorRising NOTIFICATION-TYPE
OBJECTS { hwIfMonitorSdhErrorStatistics, hwIfMonitorSdhErrorThreshold
, hwIfMonitorSdhErrorInterval, hwIfMonitorName }
STATUS current
DESCRIPTION
" Sdh error alarm notification only for B3"
::= { hwMonitorNotifications 3 }
hwIfMonitorSdhErrorResume NOTIFICATION-TYPE
OBJECTS { hwIfMonitorSdhErrorStatistics, hwIfMonitorSdhErrorThreshold
, hwIfMonitorSdhErrorInterval, hwIfMonitorName }
STATUS current
DESCRIPTION
" Sdh error alarm resume only for B3"
::= { hwMonitorNotifications 4 }
hwIfMonitorInputRateRising NOTIFICATION-TYPE
OBJECTS { hwIfMonitorInputRatePercentage, hwIfMonitorInputRateThreshold, hwIfMonitorName }
STATUS current
DESCRIPTION
" Input rate alarm notification "
::= { hwMonitorNotifications 5 }
hwIfMonitorInputRateResume NOTIFICATION-TYPE
OBJECTS { hwIfMonitorInputRatePercentage, hwIfMonitorInputRateThreshold, hwIfMonitorName }
STATUS current
DESCRIPTION
" Input rate alarm resume "
::= { hwMonitorNotifications 6}
hwIfMonitorOutputRateRising NOTIFICATION-TYPE
OBJECTS { hwIfMonitorOutputRatePercentage, hwIfMonitorOutputRateThreshold, hwIfMonitorName }
STATUS current
DESCRIPTION
" Output rate alarm notification "
::= { hwMonitorNotifications 7}
hwIfMonitorOutputRateResume NOTIFICATION-TYPE
OBJECTS { hwIfMonitorOutputRatePercentage, hwIfMonitorOutputRateThreshold, hwIfMonitorName }
STATUS current
DESCRIPTION
" Output rate alarm resume "
::= { hwMonitorNotifications 8 }
hwIfMonitorHalfDuplexRising NOTIFICATION-TYPE
OBJECTS { ifDescr }
STATUS current
DESCRIPTION
" Interface half duplex alarm norification "
::= { hwMonitorNotifications 9 }
hwIfMonitorPauseFrameRising NOTIFICATION-TYPE
OBJECTS { hwIfMonitorPauseFrameStatistics, hwIfMonitorPauseFrameThreshold,
hwIfMonitorPauseFrameInterval }
STATUS current
DESCRIPTION
" Pause frame alarm notification "
::= { hwMonitorNotifications 10 }
hwIfMonitorPauseFrameRisingResume NOTIFICATION-TYPE
OBJECTS { hwIfMonitorPauseFrameStatistics, hwIfMonitorPauseFrameThreshold,
hwIfMonitorPauseFrameInterval }
STATUS current
DESCRIPTION
" Pause frame alarm resume "
::= { hwMonitorNotifications 11 }
hwIfPortControlUp NOTIFICATION-TYPE
OBJECTS { ifName }
STATUS current
DESCRIPTION
" Control Up alarm notification "
::= { hwMonitorNotifications 12 }
hwIfPortControlDown NOTIFICATION-TYPE
OBJECTS { ifName }
STATUS current
DESCRIPTION
" Control Down alarm notification "
::= { hwMonitorNotifications 13 }
hwIfMonitorSdhB1ErrorRising NOTIFICATION-TYPE
OBJECTS { hwIfMonitorSdhB1ErrorStatistics, hwIfMonitorSdhB1ErrorThreshold
, hwIfMonitorSdhB1ErrorInterval, hwIfMonitorName }
STATUS current
DESCRIPTION
" Sdh B1 error alarm notification "
::= { hwMonitorNotifications 14 }
hwIfMonitorSdhB1ErrorResume NOTIFICATION-TYPE
OBJECTS { hwIfMonitorSdhB1ErrorStatistics, hwIfMonitorSdhB1ErrorThreshold
, hwIfMonitorSdhB1ErrorInterval, hwIfMonitorName }
STATUS current
DESCRIPTION
" Sdh B1 error alarm resume"
::= { hwMonitorNotifications 15 }
hwIfMonitorSdhB2ErrorRising NOTIFICATION-TYPE
OBJECTS { hwIfMonitorSdhB2ErrorStatistics, hwIfMonitorSdhB2ErrorThreshold
, hwIfMonitorSdhB2ErrorInterval, hwIfMonitorName }
STATUS current
DESCRIPTION
" Sdh B2 error alarm notification "
::= { hwMonitorNotifications 16 }
hwIfMonitorSdhB2ErrorResume NOTIFICATION-TYPE
OBJECTS { hwIfMonitorSdhB2ErrorStatistics, hwIfMonitorSdhB2ErrorThreshold
, hwIfMonitorSdhB2ErrorInterval, hwIfMonitorName }
STATUS current
DESCRIPTION
" Sdh B2 error alarm resume"
::= { hwMonitorNotifications 17 }
hwIfMonitorSymbolErrorRising NOTIFICATION-TYPE
OBJECTS { hwIfMonitorSymbolErrorStatistics, hwIfMonitorSymbolErrorThreshold,
hwIfMonitorSymbolErrorInterval, hwIfMonitorName }
STATUS current
DESCRIPTION
" Symbol error alarm notification "
::= { hwMonitorNotifications 18 }
hwIfMonitorSymbolErrorResume NOTIFICATION-TYPE
OBJECTS { hwIfMonitorSymbolErrorStatistics, hwIfMonitorSymbolErrorThreshold,
hwIfMonitorSymbolErrorInterval, hwIfMonitorName }
STATUS current
DESCRIPTION
" Crc error alarm resume "
::= { hwMonitorNotifications 19 }
-- 1.3.6.1.4.1.2011.5.25.41.4.40
hwIfMonitorBadBytesErrorRising NOTIFICATION-TYPE
OBJECTS { hwIfMonitorBadBytesErrorStatistics, hwIfMonitorBadBytesErrorThreshold, hwIfMonitorBadBytesErrorInterval }
STATUS current
DESCRIPTION
"Description."
::= { hwMonitorNotifications 40 }
-- 1.3.6.1.4.1.2011.5.25.41.4.41
hwIfMonitorBadBytesErrorResume NOTIFICATION-TYPE
OBJECTS { hwIfMonitorBadBytesErrorStatistics, hwIfMonitorBadBytesErrorThreshold, hwIfMonitorBadBytesErrorInterval }
STATUS current
DESCRIPTION
"Description."
::= { hwMonitorNotifications 41 }
hwIFExtTrapConformance OBJECT IDENTIFIER ::= { hwIFExtMib 5 }
hwIFExtTrapGroups OBJECT IDENTIFIER ::= { hwIFExtTrapConformance 1 }
hwIFExtTrapGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwTrunkWorkingSwitch, hwLacpNegotiateFailed, hwLacpTotalLinkLoss, hwLacpPartialLinkLoss,hwIfFlowDown,
hwIfFlowUp, hwIfNameChange, hwIfNameChangeResume, hwExtLinkDown, hwExtLinkUp, hwLoopbackBlock, hwLoopbackResume,
hwLacpNegotiateResume,hwLacpTotalLinkLossResume,hwLacpPartialLinkLossResume,
hwExtAllMemberDownNotify, hwExtAllMemberDownResume, hwIfControlFlapSuppress,hwIfControlFlapResume,hwExtInterfaceDelete}
STATUS current
DESCRIPTION
"IF Trap Group."
::= { hwIFExtTrapGroups 1 }
hwMonitorTrapGroup NOTIFICATION-GROUP
NOTIFICATIONS {
hwIfMonitorCrcErrorRising ,
hwIfMonitorCrcErrorResume ,
hwIfMonitorSdhErrorRising ,
hwIfMonitorSdhErrorResume ,
hwIfMonitorInputRateRising ,
hwIfMonitorInputRateResume ,
hwIfMonitorOutputRateRising ,
hwIfMonitorOutputRateResume ,
hwIfMonitorHalfDuplexRising,
hwIfMonitorPauseFrameRising,
hwIfMonitorPauseFrameRisingResume,
hwIfPortControlUp,
hwIfPortControlDown,
hwIfMonitorSdhB1ErrorRising,
hwIfMonitorSdhB1ErrorResume,
hwIfMonitorSdhB2ErrorRising,
hwIfMonitorSdhB2ErrorResume,
hwIfMonitorSymbolErrorRising,
hwIfMonitorSymbolErrorResume,
hwIfMonitorBadBytesErrorRising,
hwIfMonitorBadBytesErrorResume
}
STATUS current
DESCRIPTION
"Monitor Trap Group."
::= { hwIFExtTrapGroups 2 }
--add trap for IP address changed
hwIFIpNotifications OBJECT IDENTIFIER ::= { hwIFExtMib 6 }
hwIfIpAddressChange NOTIFICATION-TYPE
OBJECTS { ipAdEntNetMask,ipAdEntNetMask,ifName }
STATUS current
DESCRIPTION
"IP Trap Group.
The trap will be generated when the primary IP address of an interface changes."
::= { hwIFIpNotifications 1 }
END
--
-- HUAWEI-IF-EXT-MIB.my
--