781 lines
25 KiB
Plaintext
781 lines
25 KiB
Plaintext
LLDP-EXT-DOT3-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, TruthValue
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
lldpExtensions, lldpLocPortNum,
|
|
lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex,
|
|
lldpPortConfigEntry
|
|
FROM LLDP-MIB;
|
|
lldpXdot3MIB MODULE-IDENTITY
|
|
LAST-UPDATED "200505060000Z" -- May 06, 2005
|
|
ORGANIZATION "IEEE 802.1 Working Group"
|
|
CONTACT-INFO
|
|
" WG-URL: http://grouper.ieee.org/groups/802/1/index.html
|
|
WG-EMail: stds-802-1@ieee.org
|
|
Contact: Paul Congdon
|
|
Postal: Hewlett-Packard Company
|
|
8000 Foothills Blvd.
|
|
Roseville, CA 95747
|
|
USA
|
|
Tel: +1-916-785-5753
|
|
E-mail: paul_congdon@hp.com"
|
|
DESCRIPTION
|
|
"The LLDP Management Information Base extension module for
|
|
IEEE 802.3 organizationally defined discovery information.
|
|
In order to assure the uniqueness of the LLDP-MIB,
|
|
lldpXdot3MIB is branched from lldpExtensions using OUI value
|
|
as the node. An OUI/'company_id' is a 24 bit globally unique
|
|
assigned number referenced by various standards.
|
|
Table G-8-802.1 extension MIB object group conformance requirements
|
|
MIB group Rx mode Tx mode Tx/Rx
|
|
mode
|
|
lldpXdot3LocSystemsGroup M* - M
|
|
lldpXdot3RemSystemsGroup - M M
|
|
*Mandatory
|
|
22Copyright release for MIBs: Users of this standard may freely reproduce the MIB contained in this subclause so that it can be used for
|
|
its intended purpose.
|
|
23An ASCII version of this MIB module can be obtained by Web browser from the IEEE 802.1 Website at http://www.ieee802.org/1/
|
|
pages/MIBS.html.
|
|
IEEE
|
|
STATION AND MEDIA ACCESS CONTROL CONNECTIVITY DISCOVERY Std 802.1AB-2005
|
|
Copyright ? 2005 IEEE. All rights reserved. 141
|
|
Copyright (C) IEEE (2005). This version of this MIB module
|
|
is published as Annex G.6.1 of IEEE Std 802.1AB-2005;
|
|
see the standard itself for full legal notices."
|
|
REVISION "200505060000Z" -- May 06, 2005
|
|
DESCRIPTION
|
|
"Published as part of IEEE Std 802.1AB-2005 initial version."
|
|
-- OUI for IEEE 802.3 is 4623 (00-12-0F)
|
|
::= { lldpExtensions 4623 }
|
|
------------------------------------------------------------------------------
|
|
------------------------------------------------------------------------------
|
|
--
|
|
-- Organizationally Defined Information Extension - IEEE 802.3
|
|
--
|
|
------------------------------------------------------------------------------
|
|
------------------------------------------------------------------------------
|
|
lldpXdot3Objects OBJECT IDENTIFIER ::= { lldpXdot3MIB 1 }
|
|
-- LLDP IEEE 802.3 extension MIB groups
|
|
lldpXdot3Config OBJECT IDENTIFIER ::= { lldpXdot3Objects 1 }
|
|
lldpXdot3LocalData OBJECT IDENTIFIER ::= { lldpXdot3Objects 2 }
|
|
lldpXdot3RemoteData OBJECT IDENTIFIER ::= { lldpXdot3Objects 3 }
|
|
-- textual conventions
|
|
LldpPowerPortClass ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This TC describes the Power over Ethernet (PoE) port class."
|
|
SYNTAX INTEGER {
|
|
pClassPSE(1),
|
|
pClassPD(2)
|
|
}
|
|
LldpLinkAggStatusMap ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This TC describes the link aggregation status.
|
|
The bit 'aggCapable(0)' indicates the link is capable of being
|
|
aggregated.
|
|
The bit 'aggEnabled(1)' indicates the link is currently in
|
|
aggregation."
|
|
SYNTAX BITS {
|
|
aggCapable(0),
|
|
aggEnabled(1)
|
|
}
|
|
------------------------------------------------------------------------------
|
|
-- IEEE 802.3 - Configuration
|
|
------------------------------------------------------------------------------
|
|
lldpXdot3PortConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpXdot3PortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that controls selection of LLDP TLVs to be transmitted
|
|
on individual ports."
|
|
::= { lldpXdot3Config 1 }
|
|
lldpXdot3PortConfigEntry OBJECT-TYPE
|
|
SYNTAX LldpXdot3PortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LLDP configuration information that controls the
|
|
transmission of IEEE 802.3 organizationally defined TLVs on
|
|
LLDP transmission capable ports.
|
|
This configuration object augments the lldpPortConfigEntry of
|
|
the LLDP-MIB, therefore it is only present along with the port
|
|
configuration defined by the associated lldpPortConfigEntry
|
|
entry.
|
|
Each active lldpXdot3PortConfigEntry must be from non-volatile
|
|
storage (along with the corresponding lldpPortConfigEntry)
|
|
after a re-initialization of the management system."
|
|
AUGMENTS { lldpPortConfigEntry }
|
|
::= { lldpXdot3PortConfigTable 1 }
|
|
LldpXdot3PortConfigEntry ::= SEQUENCE {
|
|
lldpXdot3PortConfigTLVsTxEnable BITS
|
|
}
|
|
lldpXdot3PortConfigTLVsTxEnable OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
macPhyConfigStatus(0),
|
|
powerViaMDI(1),
|
|
linkAggregation(2),
|
|
maxFrameSize(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lldpXdot3PortConfigTLVsTxEnable, defined as a bitmap,
|
|
includes the IEEE 802.3 organizationally defined set of LLDP
|
|
TLVs whose transmission is allowed on the local LLDP agent by
|
|
the network management. Each bit in the bitmap corresponds
|
|
to an IEEE 802.3 subtype associated with a specific IEEE
|
|
802.3 optional TLV. The bit 0 is not used since there is
|
|
no corresponding subtype.
|
|
The bit 'macPhyConfigStatus(0)' indicates that LLDP agent
|
|
should transmit 'MAC/PHY configuration/status TLV'.
|
|
The bit 'powerViaMDI(1)' indicates that LLDP agent should
|
|
transmit 'Power via MDI TLV'.
|
|
The bit 'linkAggregation(2)' indicates that LLDP agent should
|
|
transmit 'Link Aggregation TLV'.
|
|
The bit 'maxFrameSize(3)' indicates that LLDP agent should
|
|
transmit 'Maximum-frame-size TLV'.
|
|
IEEE
|
|
STATION AND MEDIA ACCESS CONTROL CONNECTIVITY DISCOVERY Std 802.1AB-2005
|
|
Copyright ? 2005 IEEE. All rights reserved. 143
|
|
The default value for lldpXdot3PortConfigTLVsTxEnable object
|
|
is an empty set, which means no enumerated values are set.
|
|
The value of this object must be restored from non-volatile
|
|
storage after a re-initialization of the management system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 10.2.1.1"
|
|
DEFVAL { { } }
|
|
::= { lldpXdot3PortConfigEntry 1 }
|
|
------------------------------------------------------------------------------
|
|
-- IEEE 802.3 - Local Device Information
|
|
------------------------------------------------------------------------------
|
|
---
|
|
--- lldpXdot3LocPortTable: Ethernet Port AutoNeg/Speed/Duplex
|
|
--- Information Table
|
|
---
|
|
---
|
|
lldpXdot3LocPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpXdot3LocPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains one row per port of Ethernet port
|
|
information (as a part of the LLDP 802.3 organizational
|
|
extension) on the local system known to this agent."
|
|
::= { lldpXdot3LocalData 1 }
|
|
lldpXdot3LocPortEntry OBJECT-TYPE
|
|
SYNTAX LldpXdot3LocPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a particular port component."
|
|
INDEX { lldpLocPortNum }
|
|
::= { lldpXdot3LocPortTable 1 }
|
|
LldpXdot3LocPortEntry ::= SEQUENCE {
|
|
lldpXdot3LocPortAutoNegSupported TruthValue,
|
|
lldpXdot3LocPortAutoNegEnabled TruthValue,
|
|
lldpXdot3LocPortAutoNegAdvertisedCap OCTET STRING,
|
|
lldpXdot3LocPortOperMauType Integer32
|
|
}
|
|
lldpXdot3LocPortAutoNegSupported OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The truth value used to indicate whether the given port
|
|
(associated with the local system) supports Auto-negotiation."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 G.2.1"
|
|
::= { lldpXdot3LocPortEntry 1 }
|
|
lldpXdot3LocPortAutoNegEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The truth value used to indicate whether port
|
|
Auto-negotiation is enabled on the given port associated
|
|
with the local system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 G.2.1"
|
|
::= { lldpXdot3LocPortEntry 2 }
|
|
lldpXdot3LocPortAutoNegAdvertisedCap OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(2))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the value (bitmap) of the
|
|
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC
|
|
3636) which is associated with the given port on the
|
|
local system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 G.2.2"
|
|
::= { lldpXdot3LocPortEntry 3 }
|
|
lldpXdot3LocPortOperMauType OBJECT-TYPE
|
|
SYNTAX Integer32(0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer value that indicates the operational MAU type
|
|
of the given port on the local system.
|
|
This object contains the integer value derived from the
|
|
list position of the corresponding dot3MauType as listed
|
|
in IETF RFC 3636 (or subsequent revisions) and is equal
|
|
to the last number in the respective dot3MauType OID.
|
|
For example, if the ifMauType object is dot3MauType1000BaseTHD
|
|
which corresponds to {dot3MauType 29}, the numerical value of
|
|
this field will be 29. For MAU types not listed in RFC 3636
|
|
(or subsequent revisions), the value of this field shall be
|
|
set to zero."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 G.2.3"
|
|
::= { lldpXdot3LocPortEntry 4 }
|
|
---
|
|
---
|
|
--- lldpXdot3LocPowerTable: Power Ethernet Information Table
|
|
---
|
|
---
|
|
lldpXdot3LocPowerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpXdot3LocPowerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains one row per port of power ethernet
|
|
information (as a part of the LLDP 802.3 organizational
|
|
extension) on the local system known to this agent."
|
|
::= { lldpXdot3LocalData 2 }
|
|
lldpXdot3LocPowerEntry OBJECT-TYPE
|
|
SYNTAX LldpXdot3LocPowerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a particular port component."
|
|
INDEX { lldpLocPortNum }
|
|
::= { lldpXdot3LocPowerTable 1 }
|
|
LldpXdot3LocPowerEntry ::= SEQUENCE {
|
|
lldpXdot3LocPowerPortClass LldpPowerPortClass,
|
|
lldpXdot3LocPowerMDISupported TruthValue,
|
|
lldpXdot3LocPowerMDIEnabled TruthValue,
|
|
lldpXdot3LocPowerPairControlable TruthValue,
|
|
lldpXdot3LocPowerPairs Integer32,
|
|
lldpXdot3LocPowerClass Integer32
|
|
}
|
|
lldpXdot3LocPowerPortClass OBJECT-TYPE
|
|
SYNTAX LldpPowerPortClass
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value that identifies the port Class of the given port
|
|
associated with the local system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 G.3.1"
|
|
::= { lldpXdot3LocPowerEntry 1 }
|
|
lldpXdot3LocPowerMDISupported OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The truth value used to indicate whether the MDI power is
|
|
supported on the given port associated with the local system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 G.3.1"
|
|
::= { lldpXdot3LocPowerEntry 2 }
|
|
lldpXdot3LocPowerMDIEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The truth value used to identify whether MDI power is
|
|
enabled on the given port associated with the local system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 G.3.1"
|
|
::= { lldpXdot3LocPowerEntry 3 }
|
|
lldpXdot3LocPowerPairControlable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The truth value is derived from the value of
|
|
pethPsePortPowerPairsControlAbility object (defined in IETF
|
|
RFC 3621) and is used to indicate whether the pair selection
|
|
IEEE
|
|
Std 802.1AB-2005 LOCAL AND METROPOLITAN AREA NETWORKS
|
|
146 Copyright ? 2005 IEEE. All rights reserved.
|
|
can be controlled on the given port associated with the
|
|
local system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 G.3.1"
|
|
::= { lldpXdot3LocPowerEntry 4 }
|
|
lldpXdot3LocPowerPairs OBJECT-TYPE
|
|
SYNTAX Integer32(1|2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the value of the pethPsePortPowerPairs
|
|
object (defined in IETF RFC 3621) which is associated with
|
|
the given port on the local system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 G.3.2"
|
|
::= { lldpXdot3LocPowerEntry 5 }
|
|
lldpXdot3LocPowerClass OBJECT-TYPE
|
|
SYNTAX Integer32(1|2|3|4|5)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the value of the
|
|
pethPsePortPowerClassifications object (defined in IETF
|
|
RFC 3621) which is associated with the given port on the
|
|
local system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 G.3.3"
|
|
::= { lldpXdot3LocPowerEntry 6 }
|
|
---
|
|
---
|
|
--- lldpXdot3LocLinkAggTable: Link Aggregation Information Table
|
|
---
|
|
---
|
|
lldpXdot3LocLinkAggTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpXdot3LocLinkAggEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains one row per port of link aggregation
|
|
information (as a part of the LLDP 802.3 organizational
|
|
extension) on the local system known to this agent."
|
|
::= { lldpXdot3LocalData 3 }
|
|
lldpXdot3LocLinkAggEntry OBJECT-TYPE
|
|
SYNTAX LldpXdot3LocLinkAggEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Link Aggregation information about a particular port
|
|
component."
|
|
INDEX { lldpLocPortNum }
|
|
::= { lldpXdot3LocLinkAggTable 1 }
|
|
LldpXdot3LocLinkAggEntry ::= SEQUENCE {
|
|
lldpXdot3LocLinkAggStatus LldpLinkAggStatusMap,
|
|
lldpXdot3LocLinkAggPortId Integer32
|
|
}
|
|
lldpXdot3LocLinkAggStatus OBJECT-TYPE
|
|
SYNTAX LldpLinkAggStatusMap
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bitmap value contains the link aggregation capabilities
|
|
and the current aggregation status of the link."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 G.4.1"
|
|
::= { lldpXdot3LocLinkAggEntry 1 }
|
|
lldpXdot3LocLinkAggPortId OBJECT-TYPE
|
|
SYNTAX Integer32(0|1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the IEEE 802.3 aggregated port
|
|
identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1),
|
|
derived from the ifNumber of the ifIndex for the port
|
|
component in link aggregation.
|
|
If the port is not in link aggregation state and/or it
|
|
does not support link aggregation, this value should be set
|
|
to zero."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 G.4.2"
|
|
::= { lldpXdot3LocLinkAggEntry 2 }
|
|
---
|
|
---
|
|
--- lldpXdot3LocMaxFrameSizeTable: Maximum Frame Size information
|
|
---
|
|
---
|
|
lldpXdot3LocMaxFrameSizeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpXdot3LocMaxFrameSizeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains one row per port of maximum frame
|
|
size information (as a part of the LLDP 802.3 organizational
|
|
extension) on the local system known to this agent."
|
|
::= { lldpXdot3LocalData 4 }
|
|
lldpXdot3LocMaxFrameSizeEntry OBJECT-TYPE
|
|
SYNTAX LldpXdot3LocMaxFrameSizeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum Frame Size information about a particular port
|
|
component."
|
|
INDEX { lldpLocPortNum }
|
|
::= { lldpXdot3LocMaxFrameSizeTable 1 }
|
|
LldpXdot3LocMaxFrameSizeEntry ::= SEQUENCE {
|
|
lldpXdot3LocMaxFrameSize Integer32
|
|
}
|
|
lldpXdot3LocMaxFrameSize OBJECT-TYPE
|
|
SYNTAX Integer32(0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer value indicating the maximum supported frame
|
|
size in octets on the given port of the local system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 G.5.1"
|
|
::= { lldpXdot3LocMaxFrameSizeEntry 1 }
|
|
------------------------------------------------------------------------------
|
|
-- IEEE 802.3 - Remote Devices Information
|
|
------------------------------------------------------------------------------
|
|
---
|
|
---
|
|
--- lldpXdot3RemPortTable: Ethernet Information Table
|
|
---
|
|
---
|
|
lldpXdot3RemPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpXdot3RemPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains Ethernet port information (as a part
|
|
of the LLDP 802.3 organizational extension) of the remote
|
|
system."
|
|
::= { lldpXdot3RemoteData 1 }
|
|
lldpXdot3RemPortEntry OBJECT-TYPE
|
|
SYNTAX LldpXdot3RemPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a particular physical network connection."
|
|
INDEX { lldpRemTimeMark,
|
|
lldpRemLocalPortNum,
|
|
lldpRemIndex }
|
|
::= { lldpXdot3RemPortTable 1 }
|
|
LldpXdot3RemPortEntry ::= SEQUENCE {
|
|
lldpXdot3RemPortAutoNegSupported TruthValue,
|
|
lldpXdot3RemPortAutoNegEnabled TruthValue,
|
|
lldpXdot3RemPortAutoNegAdvertisedCap OCTET STRING,
|
|
lldpXdot3RemPortOperMauType Integer32
|
|
}
|
|
lldpXdot3RemPortAutoNegSupported OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The truth value used to indicate whether the given port
|
|
(associated with remote system) supports Auto-negotiation."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 G.2.1"
|
|
::= { lldpXdot3RemPortEntry 1 }
|
|
lldpXdot3RemPortAutoNegEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The truth value used to indicate whether port
|
|
Auto-negotiation is enabled on the given port associated
|
|
with the remote system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 G.2.1"
|
|
::= { lldpXdot3RemPortEntry 2 }
|
|
lldpXdot3RemPortAutoNegAdvertisedCap OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(2))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the value (bitmap) of the
|
|
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC
|
|
3636) which is associated with the given port on the
|
|
remote system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 G.2.2"
|
|
::= { lldpXdot3RemPortEntry 3 }
|
|
lldpXdot3RemPortOperMauType OBJECT-TYPE
|
|
SYNTAX Integer32(0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer value that indicates the operational MAU type
|
|
of the sending device.
|
|
This object contains the integer value derived from the
|
|
list position of the corresponding dot3MauType as listed in
|
|
in IETF RFC 3636 (or subsequent revisions) and is equal
|
|
to the last number in the respective dot3MauType OID.
|
|
For example, if the ifMauType object is dot3MauType1000BaseTHD
|
|
which corresponds to {dot3MauType 29}, the numerical value of
|
|
this field will be 29. For MAU types not listed in RFC 3636
|
|
(or subsequent revisions), the value of this field shall be
|
|
set to zero."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 G.2.3"
|
|
::= { lldpXdot3RemPortEntry 4 }
|
|
---
|
|
---
|
|
--- lldpXdot3RemPowerTable: Power Ethernet Information Table
|
|
---
|
|
---
|
|
lldpXdot3RemPowerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpXdot3RemPowerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains Ethernet power information (as a part
|
|
of the LLDP 802.3 organizational extension) of the remote
|
|
IEEE
|
|
Std 802.1AB-2005 LOCAL AND METROPOLITAN AREA NETWORKS
|
|
150 Copyright ? 2005 IEEE. All rights reserved.
|
|
system."
|
|
::= { lldpXdot3RemoteData 2 }
|
|
lldpXdot3RemPowerEntry OBJECT-TYPE
|
|
SYNTAX LldpXdot3RemPowerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a particular physical network connection."
|
|
INDEX { lldpRemTimeMark,
|
|
lldpRemLocalPortNum,
|
|
lldpRemIndex }
|
|
::= { lldpXdot3RemPowerTable 1 }
|
|
LldpXdot3RemPowerEntry ::= SEQUENCE {
|
|
lldpXdot3RemPowerPortClass LldpPowerPortClass,
|
|
lldpXdot3RemPowerMDISupported TruthValue,
|
|
lldpXdot3RemPowerMDIEnabled TruthValue,
|
|
lldpXdot3RemPowerPairControlable TruthValue,
|
|
lldpXdot3RemPowerPairs Integer32,
|
|
lldpXdot3RemPowerClass Integer32
|
|
}
|
|
lldpXdot3RemPowerPortClass OBJECT-TYPE
|
|
SYNTAX LldpPowerPortClass
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value that identifies the port Class of the given port
|
|
associated with the remote system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 G.3.1"
|
|
::= { lldpXdot3RemPowerEntry 1 }
|
|
lldpXdot3RemPowerMDISupported OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The truth value used to indicate whether the MDI power
|
|
is supported on the given port associated with the remote
|
|
system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 G.3.1"
|
|
::= { lldpXdot3RemPowerEntry 2 }
|
|
lldpXdot3RemPowerMDIEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The truth value used to identify whether MDI power is
|
|
enabled on the given port associated with the remote system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 G.3.1"
|
|
::= { lldpXdot3RemPowerEntry 3 }
|
|
lldpXdot3RemPowerPairControlable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The truth value is derived from the value of
|
|
pethPsePortPowerPairsControlAbility object (defined in IETF
|
|
RFC 3621) and is used to indicate whether the pair selection
|
|
can be controlled on the given port associated with the
|
|
remote system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 G.3.1"
|
|
::= { lldpXdot3RemPowerEntry 4 }
|
|
lldpXdot3RemPowerPairs OBJECT-TYPE
|
|
SYNTAX Integer32(1|2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the value of the pethPsePortPowerPairs
|
|
object (defined in IETF RFC 3621) which is associated with
|
|
the given port on the remote system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 G.3.2"
|
|
::= { lldpXdot3RemPowerEntry 5 }
|
|
lldpXdot3RemPowerClass OBJECT-TYPE
|
|
SYNTAX Integer32(1|2|3|4|5)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the value of the
|
|
pethPsePortPowerClassifications object (defined in IETF
|
|
RFC 3621) which is associated with the given port on the
|
|
remote system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 G.3.3"
|
|
::= { lldpXdot3RemPowerEntry 6 }
|
|
---
|
|
---
|
|
--- lldpXdot3RemLinkAggTable: Link Aggregation Information Table
|
|
---
|
|
---
|
|
lldpXdot3RemLinkAggTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpXdot3RemLinkAggEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains port link aggregation information
|
|
(as a part of the LLDP IEEE 802.3 organizational extension)
|
|
of the remote system."
|
|
::= { lldpXdot3RemoteData 3 }
|
|
lldpXdot3RemLinkAggEntry OBJECT-TYPE
|
|
SYNTAX LldpXdot3RemLinkAggEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Link Aggregation information about remote system's port
|
|
component."
|
|
INDEX { lldpRemTimeMark,
|
|
lldpRemLocalPortNum,
|
|
lldpRemIndex }
|
|
::= { lldpXdot3RemLinkAggTable 1 }
|
|
LldpXdot3RemLinkAggEntry ::= SEQUENCE {
|
|
lldpXdot3RemLinkAggStatus LldpLinkAggStatusMap,
|
|
lldpXdot3RemLinkAggPortId Integer32
|
|
}
|
|
lldpXdot3RemLinkAggStatus OBJECT-TYPE
|
|
SYNTAX LldpLinkAggStatusMap
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bitmap value contains the link aggregation capabilities
|
|
and the current aggregation status of the link."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 G.4.1"
|
|
::= { lldpXdot3RemLinkAggEntry 1 }
|
|
lldpXdot3RemLinkAggPortId OBJECT-TYPE
|
|
SYNTAX Integer32(0|1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the IEEE 802.3 aggregated port
|
|
identifier, aAggPortID (IEEE Std 802.3-2002, 30.7.2.1.1),
|
|
derived from the ifNumber of the ifIndex for the port
|
|
component associated with the remote system.
|
|
If the remote port is not in link aggregation state and/or
|
|
it does not support link aggregation, this value should be
|
|
zero."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 G.4.2"
|
|
::= { lldpXdot3RemLinkAggEntry 2 }
|
|
---
|
|
---
|
|
--- lldpXdot3RemMaxFrameSizeTable: Maximum Frame Size information
|
|
---
|
|
---
|
|
lldpXdot3RemMaxFrameSizeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpXdot3RemMaxFrameSizeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains one row per port of maximum frame
|
|
size information (as a part of the LLDP IEEE 802.3 organizational
|
|
extension) of the remote system."
|
|
::= { lldpXdot3RemoteData 4 }
|
|
lldpXdot3RemMaxFrameSizeEntry OBJECT-TYPE
|
|
SYNTAX LldpXdot3RemMaxFrameSizeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum Frame Size information about a particular port
|
|
component."
|
|
INDEX { lldpRemTimeMark,
|
|
lldpRemLocalPortNum,
|
|
lldpRemIndex }
|
|
::= { lldpXdot3RemMaxFrameSizeTable 1 }
|
|
LldpXdot3RemMaxFrameSizeEntry ::= SEQUENCE {
|
|
lldpXdot3RemMaxFrameSize Integer32
|
|
}
|
|
lldpXdot3RemMaxFrameSize OBJECT-TYPE
|
|
SYNTAX Integer32(0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer value indicating the maximum supported frame
|
|
size in octets on the port component associated with the
|
|
remote system."
|
|
REFERENCE
|
|
"IEEE Std 802.1AB-2005 G.5.1"
|
|
::= { lldpXdot3RemMaxFrameSizeEntry 1 }
|
|
------------------------------------------------------------------------------
|
|
-- Conformance Information
|
|
------------------------------------------------------------------------------
|
|
lldpXdot3Conformance OBJECT IDENTIFIER ::= { lldpXdot3MIB 2 }
|
|
lldpXdot3Compliances OBJECT IDENTIFIER ::= { lldpXdot3Conformance 1 }
|
|
lldpXdot3Groups OBJECT IDENTIFIER ::= { lldpXdot3Conformance 2 }
|
|
-- compliance statements
|
|
lldpXdot3Compliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for SNMP entities which implement
|
|
the LLDP 802.3 organizational extension MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { lldpXdot3ConfigGroup,
|
|
lldpXdot3LocSysGroup,
|
|
lldpXdot3RemSysGroup
|
|
}
|
|
::= { lldpXdot3Compliances 1 }
|
|
-- MIB groupings
|
|
lldpXdot3ConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
lldpXdot3PortConfigTLVsTxEnable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to configure the
|
|
LLDP 802.3 organizational extension implementation behavior.
|
|
This group is mandatory for agents which implement the
|
|
LLDP 802.3 organizational extension."
|
|
::= { lldpXdot3Groups 1 }
|
|
lldpXdot3LocSysGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
lldpXdot3LocPortAutoNegSupported,
|
|
lldpXdot3LocPortAutoNegEnabled,
|
|
lldpXdot3LocPortAutoNegAdvertisedCap,
|
|
lldpXdot3LocPortOperMauType,
|
|
lldpXdot3LocPowerPortClass,
|
|
lldpXdot3LocPowerMDISupported,
|
|
lldpXdot3LocPowerMDIEnabled,
|
|
lldpXdot3LocPowerPairControlable,
|
|
lldpXdot3LocPowerPairs,
|
|
lldpXdot3LocPowerClass,
|
|
lldpXdot3LocLinkAggStatus,
|
|
lldpXdot3LocLinkAggPortId,
|
|
lldpXdot3LocMaxFrameSize
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent LLDP
|
|
802.3 organizational extension Local Device Information.
|
|
This group is mandatory for agents which implement the
|
|
LLDP 802.3 organizational extension in the TX mode."
|
|
::= { lldpXdot3Groups 2 }
|
|
lldpXdot3RemSysGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
lldpXdot3RemPortAutoNegSupported,
|
|
lldpXdot3RemPortAutoNegEnabled,
|
|
lldpXdot3RemPortAutoNegAdvertisedCap,
|
|
lldpXdot3RemPortOperMauType,
|
|
lldpXdot3RemPowerPortClass,
|
|
lldpXdot3RemPowerMDISupported,
|
|
lldpXdot3RemPowerMDIEnabled,
|
|
lldpXdot3RemPowerPairControlable,
|
|
lldpXdot3RemPowerPairs,
|
|
lldpXdot3RemPowerClass,
|
|
lldpXdot3RemLinkAggStatus,
|
|
lldpXdot3RemLinkAggPortId,
|
|
lldpXdot3RemMaxFrameSize
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent LLDP
|
|
802.3 organizational extension Local Device Information.
|
|
This group is mandatory for agents which implement the
|
|
LLDP 802.3 organizational extension in the RX mode."
|
|
::= { lldpXdot3Groups 3 }
|
|
END
|