538 lines
18 KiB
Plaintext
538 lines
18 KiB
Plaintext
-- =================================================================
|
|
-- Description: RIP mib
|
|
-- Reference: This mib was extracted from RFC 1724
|
|
-- =================================================================
|
|
|
|
RIPv2-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Counter32,
|
|
TimeTicks, IpAddress FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, RowStatus FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
|
|
mib-2 FROM RFC1213-MIB;
|
|
|
|
-- This MIB module uses the extended OBJECT-TYPE macro as
|
|
-- defined in [9].
|
|
|
|
rip2 MODULE-IDENTITY
|
|
LAST-UPDATED "9407272253Z" -- Wed Jul 27 22:53:04 PDT 1994
|
|
ORGANIZATION "IETF RIP-II Working Group"
|
|
CONTACT-INFO
|
|
" Fred Baker
|
|
Postal: Cisco Systems
|
|
519 Lado Drive
|
|
Santa Barbara, California 93111
|
|
Tel: +1 805 681 0115
|
|
E-Mail: fbaker@cisco.com
|
|
|
|
Postal: Gary Malkin
|
|
Xylogics, Inc.
|
|
53 Third Avenue
|
|
Burlington, MA 01803
|
|
|
|
Phone: (617) 272-8140
|
|
EMail: gmalkin@Xylogics.COM"
|
|
DESCRIPTION
|
|
"The MIB module to describe the RIP2 Version 2 Protocol"
|
|
::= { mib-2 23 }
|
|
|
|
-- RIP-2 Management Information Base
|
|
|
|
-- the RouteTag type represents the contents of the
|
|
-- Route Domain field in the packet header or route entry.
|
|
-- The use of the Route Domain is deprecated.
|
|
|
|
RouteTag ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the RouteTag type represents the contents of the Route Domain
|
|
field in the packet header or route entry"
|
|
SYNTAX OCTET STRING (SIZE (2))
|
|
|
|
|
|
--4.1 Global Counters
|
|
|
|
-- The RIP-2 Globals Group.
|
|
-- Implementation of this group is mandatory for systems
|
|
-- which implement RIP-2.
|
|
|
|
-- These counters are intended to facilitate debugging quickly
|
|
-- changing routes or failing neighbors
|
|
|
|
rip2Globals OBJECT IDENTIFIER ::= { rip2 1 }
|
|
|
|
rip2GlobalRouteChanges OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of route changes made to the IP Route
|
|
Database by RIP. This does not include the refresh
|
|
of a route's age."
|
|
::= { rip2Globals 1 }
|
|
|
|
rip2GlobalQueries OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of responses sent to RIP queries
|
|
from other systems."
|
|
::= { rip2Globals 2 }
|
|
|
|
--4.2 RIP Interface Tables
|
|
|
|
-- RIP Interfaces Groups
|
|
-- Implementation of these Groups is mandatory for systems
|
|
-- which implement RIP-2.
|
|
|
|
-- The RIP Interface Status Table.
|
|
|
|
rip2IfStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rip2IfStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of subnets which require separate
|
|
status monitoring in RIP."
|
|
::= { rip2 2 }
|
|
|
|
rip2IfStatEntry OBJECT-TYPE
|
|
SYNTAX Rip2IfStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Single Routing Domain in a single Subnet."
|
|
INDEX { rip2IfStatAddress }
|
|
::= { rip2IfStatTable 1 }
|
|
|
|
Rip2IfStatEntry ::=
|
|
SEQUENCE {
|
|
rip2IfStatAddress
|
|
IpAddress,
|
|
rip2IfStatRcvBadPackets
|
|
Counter32,
|
|
rip2IfStatRcvBadRoutes
|
|
Counter32,
|
|
rip2IfStatSentUpdates
|
|
Counter32,
|
|
rip2IfStatStatus
|
|
RowStatus
|
|
}
|
|
|
|
rip2IfStatAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of this system on the indicated
|
|
subnet. For unnumbered interfaces, the value 0.0.0.N,
|
|
where the least significant 24 bits (N) is the ifIndex
|
|
for the IP Interface in network byte order."
|
|
::= { rip2IfStatEntry 1 }
|
|
|
|
rip2IfStatRcvBadPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RIP response packets received by
|
|
the RIP process which were subsequently discarded
|
|
for any reason (e.g. a version 0 packet, or an
|
|
unknown command type)."
|
|
::= { rip2IfStatEntry 2 }
|
|
|
|
rip2IfStatRcvBadRoutes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of routes, in valid RIP packets,
|
|
which were ignored for any reason (e.g. unknown
|
|
address family, or invalid metric)."
|
|
::= { rip2IfStatEntry 3 }
|
|
|
|
rip2IfStatSentUpdates OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of triggered RIP updates actually
|
|
sent on this interface. This explicitly does
|
|
NOT include full updates sent containing new
|
|
information."
|
|
::= { rip2IfStatEntry 4 }
|
|
|
|
rip2IfStatStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Writing invalid has the effect of deleting
|
|
this interface."
|
|
::= { rip2IfStatEntry 5 }
|
|
|
|
-- The RIP Interface Configuration Table.
|
|
|
|
rip2IfConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rip2IfConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of subnets which require separate
|
|
configuration in RIP."
|
|
::= { rip2 3 }
|
|
|
|
rip2IfConfEntry OBJECT-TYPE
|
|
SYNTAX Rip2IfConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Single Routing Domain in a single Subnet."
|
|
INDEX { rip2IfConfAddress }
|
|
::= { rip2IfConfTable 1 }
|
|
|
|
Rip2IfConfEntry ::=
|
|
SEQUENCE {
|
|
rip2IfConfAddress
|
|
IpAddress,
|
|
rip2IfConfDomain
|
|
RouteTag,
|
|
rip2IfConfAuthType
|
|
INTEGER,
|
|
rip2IfConfAuthKey
|
|
OCTET STRING (SIZE(0..16)),
|
|
rip2IfConfSend
|
|
INTEGER,
|
|
rip2IfConfReceive
|
|
INTEGER,
|
|
rip2IfConfDefaultMetric
|
|
INTEGER,
|
|
rip2IfConfStatus
|
|
RowStatus,
|
|
rip2IfConfSrcAddress
|
|
IpAddress
|
|
}
|
|
|
|
rip2IfConfAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of this system on the indicated
|
|
subnet. For unnumbered interfaces, the value 0.0.0.N,
|
|
where the least significant 24 bits (N) is the ifIndex
|
|
for the IP Interface in network byte order."
|
|
::= { rip2IfConfEntry 1 }
|
|
|
|
rip2IfConfDomain OBJECT-TYPE
|
|
SYNTAX RouteTag
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Value inserted into the Routing Domain field
|
|
of all RIP packets sent on this interface."
|
|
DEFVAL { '0000'h }
|
|
::= { rip2IfConfEntry 2 }
|
|
|
|
rip2IfConfAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAuthentication (1),
|
|
simplePassword (2),
|
|
md5 (3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of Authentication used on this
|
|
interface."
|
|
DEFVAL { noAuthentication }
|
|
::= { rip2IfConfEntry 3 }
|
|
|
|
rip2IfConfAuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..16))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value to be used as the Authentication Key
|
|
whenever the corresponding instance of
|
|
rip2IfConfAuthType has a value other than
|
|
noAuthentication. A modification of the corresponding
|
|
instance of rip2IfConfAuthType does not modify
|
|
the rip2IfConfAuthKey value. If a string shorter
|
|
than 16 octets is supplied, it will be left-
|
|
justified and padded to 16 octets, on the right,
|
|
with nulls (0x00).
|
|
|
|
Reading this object always results in an OCTET
|
|
STRING of length zero; authentication may not
|
|
be bypassed by reading the MIB object."
|
|
DEFVAL { ''h }
|
|
::= { rip2IfConfEntry 4 }
|
|
|
|
rip2IfConfSend OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
doNotSend (1),
|
|
ripVersion1 (2),
|
|
rip1Compatible (3),
|
|
ripVersion2 (4),
|
|
ripV1Demand (5),
|
|
ripV2Demand (6)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"What the router sends on this interface.
|
|
ripVersion1 implies sending RIP updates compliant
|
|
with RFC 1058. rip1Compatible implies
|
|
broadcasting RIP-2 updates using RFC 1058 route
|
|
subsumption rules. ripVersion2 implies
|
|
multicasting RIP-2 updates. ripV1Demand indicates
|
|
the use of Demand RIP on a WAN interface under RIP
|
|
Version 1 rules. ripV2Demand indicates the use of
|
|
Demand RIP on a WAN interface under Version 2 rules."
|
|
DEFVAL { rip1Compatible }
|
|
::= { rip2IfConfEntry 5 }
|
|
|
|
rip2IfConfReceive OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rip1 (1),
|
|
rip2 (2),
|
|
rip1OrRip2 (3),
|
|
doNotRecieve (4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates which version of RIP updates
|
|
are to be accepted. Note that rip2 and
|
|
rip1OrRip2 implies reception of multicast
|
|
packets."
|
|
DEFVAL { rip1OrRip2 }
|
|
::= { rip2IfConfEntry 6 }
|
|
|
|
rip2IfConfDefaultMetric OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0..15 )
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the metric that is to
|
|
be used for the default route entry in RIP updates
|
|
originated on this interface. A value of zero
|
|
indicates that no default route should be
|
|
originated; in this case, a default route via
|
|
another router may be propagated."
|
|
::= { rip2IfConfEntry 7 }
|
|
|
|
rip2IfConfStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Writing invalid has the effect of deleting
|
|
this interface."
|
|
::= { rip2IfConfEntry 8 }
|
|
|
|
rip2IfConfSrcAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address this system will use as a source
|
|
address on this interface. If it is a numbered
|
|
interface, this MUST be the same value as
|
|
rip2IfConfAddress. On unnumbered interfaces,
|
|
it must be the value of rip2IfConfAddress for
|
|
some interface on the system."
|
|
::= { rip2IfConfEntry 9 }
|
|
|
|
--4.3 Peer Table
|
|
|
|
-- Peer Table
|
|
|
|
-- The RIP Peer Group
|
|
-- Implementation of this Group is Optional
|
|
|
|
-- This group provides information about active peer
|
|
-- relationships intended to assist in debugging. An
|
|
-- active peer is a router from which a valid RIP
|
|
-- updated has been heard in the last 180 seconds.
|
|
|
|
rip2PeerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rip2PeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of RIP Peers."
|
|
::= { rip2 4 }
|
|
|
|
rip2PeerEntry OBJECT-TYPE
|
|
SYNTAX Rip2PeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information regarding a single routing peer."
|
|
INDEX { rip2PeerAddress, rip2PeerDomain }
|
|
::= { rip2PeerTable 1 }
|
|
|
|
Rip2PeerEntry ::=
|
|
SEQUENCE {
|
|
rip2PeerAddress
|
|
IpAddress,
|
|
rip2PeerDomain
|
|
RouteTag,
|
|
rip2PeerLastUpdate
|
|
TimeTicks,
|
|
rip2PeerVersion
|
|
INTEGER,
|
|
rip2PeerRcvBadPackets
|
|
Counter32,
|
|
rip2PeerRcvBadRoutes
|
|
Counter32
|
|
}
|
|
|
|
rip2PeerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address that the peer is using as its source
|
|
address. Note that on an unnumbered link, this may
|
|
not be a member of any subnet on the system."
|
|
::= { rip2PeerEntry 1 }
|
|
|
|
rip2PeerDomain OBJECT-TYPE
|
|
SYNTAX RouteTag
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value in the Routing Domain field in RIP
|
|
packets received from the peer. As domain suuport
|
|
is deprecated, this must be zero."
|
|
::= { rip2PeerEntry 2 }
|
|
|
|
rip2PeerLastUpdate OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime when the most recent
|
|
RIP update was received from this system."
|
|
::= { rip2PeerEntry 3 }
|
|
|
|
rip2PeerVersion OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0..255 )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RIP version number in the header of the
|
|
last RIP packet received."
|
|
::= { rip2PeerEntry 4 }
|
|
|
|
rip2PeerRcvBadPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RIP response packets from this
|
|
peer discarded as invalid."
|
|
::= { rip2PeerEntry 5 }
|
|
|
|
|
|
rip2PeerRcvBadRoutes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of routes from this peer that were
|
|
ignored because the entry format was invalid."
|
|
::= { rip2PeerEntry 6 }
|
|
|
|
-- conformance information
|
|
|
|
rip2Conformance OBJECT IDENTIFIER ::= { rip2 5 }
|
|
|
|
rip2Groups OBJECT IDENTIFIER ::= { rip2Conformance 1 }
|
|
rip2Compliances OBJECT IDENTIFIER ::= { rip2Conformance 2 }
|
|
|
|
-- compliance statements
|
|
rip2Compliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement "
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
rip2GlobalGroup,
|
|
rip2IfStatGroup,
|
|
rip2IfConfGroup,
|
|
rip2PeerGroup
|
|
}
|
|
GROUP rip2GlobalGroup
|
|
DESCRIPTION
|
|
"This group defines global controls for RIP-II systems."
|
|
GROUP rip2IfStatGroup
|
|
DESCRIPTION
|
|
"This group defines interface statistics for RIP-II systems."
|
|
GROUP rip2IfConfGroup
|
|
DESCRIPTION
|
|
"This group defines interface configuration for RIP-II systems."
|
|
GROUP rip2PeerGroup
|
|
DESCRIPTION
|
|
"This group defines peer information for RIP-II systems."
|
|
::= { rip2Compliances 1 }
|
|
|
|
-- units of conformance
|
|
|
|
rip2GlobalGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
rip2GlobalRouteChanges,
|
|
rip2GlobalQueries
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group defines global controls for RIP-II systems."
|
|
::= { rip2Groups 1 }
|
|
rip2IfStatGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
rip2IfStatAddress,
|
|
rip2IfStatRcvBadPackets,
|
|
rip2IfStatRcvBadRoutes,
|
|
rip2IfStatSentUpdates,
|
|
rip2IfStatStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group defines interface statistics for RIP-II systems."
|
|
::= { rip2Groups 2 }
|
|
rip2IfConfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
rip2IfConfAddress,
|
|
rip2IfConfAuthType,
|
|
rip2IfConfAuthKey,
|
|
rip2IfConfSend,
|
|
rip2IfConfReceive,
|
|
rip2IfConfDefaultMetric,
|
|
rip2IfConfStatus,
|
|
rip2IfConfSrcAddress
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group defines interface configuration for RIP-II systems."
|
|
::= { rip2Groups 3 }
|
|
rip2PeerGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
rip2PeerAddress,
|
|
rip2PeerDomain,
|
|
rip2PeerLastUpdate,
|
|
rip2PeerVersion,
|
|
rip2PeerRcvBadPackets,
|
|
rip2PeerRcvBadRoutes
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group defines peer information for RIP-II systems."
|
|
::= { rip2Groups 4 }
|
|
|
|
END
|