x/compass-core
Code Issues Proposed changes
fd41871603
compass-core/mibs/HUAWEI-L2MAM-MIB.mib

3058 lines
124 KiB
Plaintext
Raw Blame History

-- ==================================================================
-- Copyright (C) 2005 by HUAWEI TECHNOLOGIES. All rights reserved.
--
-- Description: HUAWEI Layer Two mac management MIB
-- Reference:
-- Version: V1.0
-- History:
--
-- ==================================================================
-- ==================================================================
--
-- Varibles and types be imported
--
-- ==================================================================
HUAWEI-L2MAM-MIB DEFINITIONS ::= BEGIN
IMPORTS
hwDatacomm
FROM HUAWEI-MIB
MacAddress, RowStatus, TEXTUAL-CONVENTION
FROM SNMPv2-TC
OBJECT-TYPE, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, Unsigned32, Counter64, IpAddress
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
InterfaceIndex,InterfaceIndexOrZero,ifDescr
FROM IF-MIB
PhysicalIndex, entPhysicalIndex, entPhysicalName
FROM ENTITY-MIB
hwBaseTrapSeverity, hwBaseTrapProbableCause, hwBaseTrapEventType
FROM HUAWEI-BASE-TRAP-MIB
hwL2IfPortName
FROM HUAWEI-L2IF-MIB
VlanIdOrNone, VlanId
FROM Q-BRIDGE-MIB
EnabledStatus
FROM P-BRIDGE-MIB
EnableValue
FROM NQA-MIB;
hwL2Mgmt OBJECT IDENTIFIER ::= { hwDatacomm 42 }
hwL2MAM MODULE-IDENTITY
LAST-UPDATED "200504280000Z"
ORGANIZATION "Huawei Technologies co.,Ltd."
CONTACT-INFO
"VRP Team Huawei Technologies co.,Ltd.
Huawei Bld.,NO.3 Xinxi Rd.,
Shang-Di Information Industry Base,
Hai-Dian District Beijing P.R. China
http://www.huawei.com
Zip:100085"
DESCRIPTION
"This is the layer 2 mac-address management. It contains the layer 2
mac-address forwarding information currently operating on this device.
And also contains the information of mac-limit rule. "
::= { hwL2Mgmt 2}
-- ==================================================================
--
-- ======================= definition begin =========================
--
-- ==================================================================
hwL2MAMObjects OBJECT IDENTIFIER ::= { hwL2MAM 1 }
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
VlanIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value used to index per-VLAN tables: values of 0 and
4095 are not permitted; if the value is between 1 and
4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with
global scope within a given bridged domain (see VlanId
textual convention). If the value is greater than 4095
then it represents a VLAN with scope local to the
particular agent, i.e. one without a global VLAN-ID
assigned to it. Such VLANs are outside the scope of
IEEE 802.1Q but it is convenient to be able to manage them
in the same way using this MIB."
SYNTAX Unsigned32
hwL2MaxMacLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of Mac-address limit rule."
::= { hwL2MAMObjects 1 }
-- Configured mac-address forwarding table
hwdbCfgFdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwdbCfgFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The layer 2 Configured mac-address forwarding table .The table that
contains the layer 2 mac-address forwarding information
currently operating on this device."
::= { hwL2MAMObjects 2 }
hwdbCfgFdbEntry OBJECT-TYPE
SYNTAX HwdbCfgFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of The layer 2 mac-address forwarding table."
INDEX { hwCfgFdbMac, hwCfgFdbVlanId, hwCfgFdbVsiName }
::= { hwdbCfgFdbTable 1 }
HwdbCfgFdbEntry ::=
SEQUENCE {
hwCfgFdbMac
MacAddress,
hwCfgFdbVlanId
VlanIndex,
hwCfgFdbVsiName
OCTET STRING,
hwCfgFdbPort
InterfaceIndex,
hwCfgFdbType
INTEGER,
hwCfgFdbRowstatus
RowStatus,
hwCfgFdbAtmPort
InterfaceIndexOrZero,
hwCfgFdbVpi
Integer32,
hwCfgFdbVci
Integer32,
hwCfgFdbCeDefault
INTEGER
}
hwCfgFdbMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unicast MAC address for which the device contains
it's information in the mac-address table. The mac-address
can't be a special address or multicast address."
::= { hwdbCfgFdbEntry 1 }
hwCfgFdbVlanId OBJECT-TYPE
SYNTAX VlanIndex (0..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN name or other identifier referring to the VLAN
which is correlative to the hwFdbMac."
::= { hwdbCfgFdbEntry 2 }
hwCfgFdbVsiName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VSI-ID or other identifier referring to the VSI
which is correlative to the hwFdbMac."
::= { hwdbCfgFdbEntry 3 }
hwCfgFdbPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The forwarding port. The port must be an ethernet port.
And the port must be contained by the hwFdbVlanId or allow
the hwFdbVlanId get across through itself."
::= { hwdbCfgFdbEntry 4 }
hwCfgFdbType OBJECT-TYPE
SYNTAX INTEGER
{
static(2),
blackhole(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mac-address table item type of this entry. The meanings of
the values are:
static(2)- the mac-address is configured by user, doesn't aging out, and this
entry doesn't lost after the device/FSU is reset or FSU is pulled out.
blackhole(3)- the mac-address is configured by user for discarding frame which
contains specific destination mac-address, doesn't aging out, and this
entry doesn't lost after the device/FSU is reset or FSU is pulled out.
When the type is dynamic ,the item can't be created."
::= { hwdbCfgFdbEntry 5 }
hwCfgFdbRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The operating state of the row."
::= { hwdbCfgFdbEntry 6 }
hwCfgFdbAtmPort OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The forwarding port. The port must be an atm port. "
::= { hwdbCfgFdbEntry 7 }
hwCfgFdbVpi OBJECT-TYPE
SYNTAX Integer32 (0..255 | 65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Virtual Path Identifier."
::= { hwdbCfgFdbEntry 8 }
hwCfgFdbVci OBJECT-TYPE
SYNTAX Integer32 (0..2047 | 65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Virtual Connection Identifier."
::= { hwdbCfgFdbEntry 9 }
hwCfgFdbCeDefault OBJECT-TYPE
SYNTAX INTEGER
{
no-ce-default(0),
ce-default(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag indicates whether the MAC address entry is configed according to ce-default-vlan.
'no-ce-default(0)' indicates no, 'ce-default(1)' indicates yes"
::= { hwdbCfgFdbEntry 10 }
-- Dynamic (Leaned) mac-address forwarding table
hwdbDynFdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwdbDynFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The layer 2 Dynamic (Leaned)mac-address forwarding table .The table that
contains the layer 2 mac-address forwarding information
currently operating on this device."
::= { hwL2MAMObjects 3 }
hwdbDynFdbEntry OBJECT-TYPE
SYNTAX HwdbDynFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of The layer 2 mac-address forwarding table."
INDEX { hwDynFdbMac, hwDynFdbVlanId, hwDynFdbVsiName }
::= { hwdbDynFdbTable 1 }
HwdbDynFdbEntry ::=
SEQUENCE {
hwDynFdbMac
MacAddress,
hwDynFdbVlanId
VlanIndex,
hwDynFdbVsiName
OCTET STRING,
hwDynFdbPort
InterfaceIndex,
hwDynFdbAtmPort
InterfaceIndexOrZero,
hwDynFdbVpi
Integer32,
hwDynFdbVci
Integer32,
hwDynFdbRowstatus
RowStatus,
hwDynSecurityFdbToStaticEnable
EnableValue
}
hwDynFdbMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unicast MAC address for which the device contains
it's information in the mac-address table. The mac-address
can't be a special address or multicast address."
::= { hwdbDynFdbEntry 1 }
hwDynFdbVlanId OBJECT-TYPE
SYNTAX VlanIndex (0..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN name or other identifier referring to the VLAN
which is correlative to the hwFdbMac."
::= { hwdbDynFdbEntry 2 }
hwDynFdbVsiName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VSI-ID or other identifier referring to the VSI
which is correlative to the hwFdbMac."
::= { hwdbDynFdbEntry 3 }
hwDynFdbPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The forwarding port. The port must be an ethernet port.
And the port must be contained by the hwFdbVlanId or allow
the hwFdbVlanId get across through itself."
::= { hwdbDynFdbEntry 4 }
hwDynFdbAtmPort OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The forwarding port. The port must be an atm port. "
::= { hwdbDynFdbEntry 5 }
hwDynFdbVpi OBJECT-TYPE
SYNTAX Integer32 (0..255 | 65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Virtual Path Identifier."
::= { hwdbDynFdbEntry 6 }
hwDynFdbVci OBJECT-TYPE
SYNTAX Integer32 (0..2047 | 65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Virtual Connection Identifier."
::= { hwdbDynFdbEntry 7 }
hwDynFdbRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The operating state of the row."
::= { hwdbDynFdbEntry 8 }
hwDynSecurityFdbToStaticEnable OBJECT-TYPE
SYNTAX EnableValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When this object is set to 'Enable(1)',if port security is enabled ,
the dynamic mac will convert to static."
::= { hwdbDynFdbEntry 9 }
-- MacLimit
hwMacLimitTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMacLimitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the mac-address learning-limit rule information for device.
It can limit on ethernet interface,vlan,ethernet interface + vlan."
::= { hwL2MAMObjects 4 }
hwMacLimitEntry OBJECT-TYPE
SYNTAX HwMacLimitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the mac-address learning-limit table."
INDEX { hwMacLimitPort,hwMacLimitVlanId,hwMacLimitVsiName}
::= { hwMacLimitTable 1 }
HwMacLimitEntry ::=
SEQUENCE {
hwMacLimitPort
InterfaceIndexOrZero,
hwMacLimitVlanId
Integer32,
hwMacLimitVsiName
OCTET STRING,
hwMacLimitMaxMac
Integer32,
hwMacLimitMaxRate
Integer32,
hwMacLimitAction
INTEGER,
hwMacLimitAlarm
INTEGER,
hwMacLimitRowstatus
RowStatus,
hwMacAddressLearn
INTEGER,
hwMacDynAddressLearnNum
Integer32,
hwMacSecureAddressLearnNum
Integer32
}
hwMacLimitPort OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port number which will be configured mac-limit."
::= { hwMacLimitEntry 1 }
hwMacLimitVlanId OBJECT-TYPE
SYNTAX Integer32(0..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vlan id which will be configured mac-limit."
::= { hwMacLimitEntry 2 }
hwMacLimitVsiName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vsi name which will be configured mac-limit."
::= { hwMacLimitEntry 3 }
hwMacLimitMaxMac OBJECT-TYPE
SYNTAX Integer32(0..131072)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum mac address. When the value is '0',
the meaning is that there isn't limiting rule to
the mac-address number."
::= { hwMacLimitEntry 4 }
hwMacLimitMaxRate OBJECT-TYPE
SYNTAX Integer32(0..1000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The max mac-address learning rate. When the valu
e is '0', the meaning is that there isn't limiting
rule to the learning rate."
::= { hwMacLimitEntry 5 }
hwMacLimitAction OBJECT-TYPE
SYNTAX INTEGER
{
discard(1),
forward(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mac-address limit action of this entry. The
meanings of the values are:
discard(1)- Discard packets
forward(2)- Forward packets."
::= { hwMacLimitEntry 6 }
hwMacLimitAlarm OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mac-limit alarm switch of this entry. The meanings of
the values are:
disable(1), enable(2)"
::= { hwMacLimitEntry 7 }
hwMacLimitRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The operating state of the row."
::= { hwMacLimitEntry 8 }
hwMacAddressLearn OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag of enable Mac address learn."
::= { hwMacLimitEntry 9 }
hwMacDynAddressLearnNum OBJECT-TYPE
SYNTAX Integer32(0..131072)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of learned dynamic MAC address ."
::= { hwMacLimitEntry 10 }
hwMacSecureAddressLearnNum OBJECT-TYPE
SYNTAX Integer32(0..131072)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of learned secure MAC address ."
::= { hwMacLimitEntry 11 }
hwMacUsageTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMacUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MAC usage table"
::= { hwL2MAMObjects 5 }
hwMacUsageEntry OBJECT-TYPE
SYNTAX HwMacUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MAC usage entry"
INDEX { entPhysicalIndex }
::= { hwMacUsageTable 1 }
HwMacUsageEntry ::=
SEQUENCE {
hwMacEntityUsage
Integer32,
hwMacEntityUsageThreshold
Integer32
}
hwMacEntityUsage OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC usage in every IO board"
::= { hwMacUsageEntry 1 }
hwMacEntityUsageThreshold OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MAC usage range"
::= { hwMacUsageEntry 2 }
--3tuple static mac
hwdbCfg3tupleFdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwdbCfg3tupleFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The layer 2 configured mac-address forwarding table .The table that
contains the layer 2 mac-address forwarding information
currently operating on this device."
::= { hwL2MAMObjects 6 }
hwdbCfg3tupleFdbEntry OBJECT-TYPE
SYNTAX HwdbCfg3tupleFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of The layer 2 mac-address forwarding table."
INDEX { hwdbCfg3tupleFdbMac, hwdbCfg3tupleFdbVlanId, hwdbCfg3tupleFdbInPort }
::= { hwdbCfg3tupleFdbTable 1 }
HwdbCfg3tupleFdbEntry ::=
SEQUENCE {
hwdbCfg3tupleFdbMac
MacAddress,
hwdbCfg3tupleFdbVlanId
Integer32,
hwdbCfg3tupleFdbInPort
InterfaceIndex,
hwdbCfg3tupleFdbOutPort
InterfaceIndex,
hwdbCfg3tupleFdbRowStatus
RowStatus
}
hwdbCfg3tupleFdbMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unicast MAC address for which the device contains
it's information in the mac-address table. The mac-address
can't be a special address or multicast address."
::= { hwdbCfg3tupleFdbEntry 1 }
hwdbCfg3tupleFdbVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN name or other identifier referring to the VLAN
which is correlative to the hwFdbMac."
::= { hwdbCfg3tupleFdbEntry 2 }
hwdbCfg3tupleFdbInPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The input port. The port must be an ethernet port.
And the port must be contained by the hwFdbVlanId or allow
the hwFdbVlanId get across through itself."
::= { hwdbCfg3tupleFdbEntry 3 }
hwdbCfg3tupleFdbOutPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The forwarding port. The port must be an ethernet port.
And the port must be contained by the hwFdbVlanId or allow
the hwFdbVlanId get across through itself."
::= { hwdbCfg3tupleFdbEntry 4 }
hwdbCfg3tupleFdbRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The operating state of the row."
::= { hwdbCfg3tupleFdbEntry 5 }
hwL2MacTraps OBJECT IDENTIFIER ::= { hwL2MAMObjects 7 }
hwMacUsageRaisingThreshold NOTIFICATION-TYPE
OBJECTS { hwBaseTrapSeverity, hwBaseTrapProbableCause, hwBaseTrapEventType, entPhysicalName, hwMacEntityUsage, hwMacEntityUsageThreshold}
STATUS current
DESCRIPTION
"Beyond the configurated Mac usage"
::= { hwL2MacTraps 1 }
hwMacUsageFallingThreshold NOTIFICATION-TYPE
OBJECTS { hwBaseTrapSeverity, hwBaseTrapProbableCause, hwBaseTrapEventType, entPhysicalName, hwMacEntityUsage, hwMacEntityUsageThreshold}
STATUS current
DESCRIPTION
"Resume the alarm of Mac usage"
::= { hwL2MacTraps 2 }
hwMacLimitNumRaisingThreshold NOTIFICATION-TYPE
OBJECTS { hwBaseTrapSeverity, hwBaseTrapProbableCause, hwBaseTrapEventType, hwMacDynAddressLearnNum, hwMacLimitMaxMac,hwL2IfPortName}
STATUS current
DESCRIPTION
"Beyond the mac limited learning number "
::= { hwL2MacTraps 3 }
hwMacLimitNumFallingThreshold NOTIFICATION-TYPE
OBJECTS { hwBaseTrapSeverity, hwBaseTrapProbableCause, hwBaseTrapEventType, hwMacDynAddressLearnNum, hwMacLimitMaxMac,hwL2IfPortName}
STATUS current
DESCRIPTION
"Resume the alarm of Mac usage"
::= { hwL2MacTraps 4 }
hwUntargetMacNumAlarm NOTIFICATION-TYPE
OBJECTS { hwBaseTrapSeverity, hwBaseTrapProbableCause, hwBaseTrapEventType, hwUntargetMacNum}
STATUS current
DESCRIPTION "Warning of untarget mac-address numbers."
::= { hwL2MacTraps 5 }
hwPortSecRcvInsecurePktAlarm NOTIFICATION-TYPE
OBJECTS {ifDescr, hwPortSecurityProtectAction}
STATUS current
DESCRIPTION
"Alarm of port perform the protect action shutdown or restrict
when receiving insecure mac packets in the interface."
::= { hwL2MacTraps 6 }
hwPwMacLimitNumRaisingThreshold NOTIFICATION-TYPE
OBJECTS { hwBaseTrapSeverity, hwBaseTrapProbableCause, hwBaseTrapEventType, hwPwMacDynAddressLearnNum, hwPwMacLimitMaxMac}
STATUS current
DESCRIPTION
"The number of MAC addresses that are learnt based on the PW reaches
the upper limit."
::= { hwL2MacTraps 7 }
hwPwMacLimitNumFallingThreshold NOTIFICATION-TYPE
OBJECTS { hwBaseTrapSeverity, hwBaseTrapProbableCause, hwBaseTrapEventType, hwPwMacDynAddressLearnNum, hwPwMacLimitMaxMac}
STATUS current
DESCRIPTION
"The number of MAC addresses that are learnt based on the PW falls below
the upper limit."
::= { hwL2MacTraps 8 }
hwPortStickyReachMaxAlarm NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"An alarm is generated when the number of sticky MAC address entries reaches the maximum value."
::= { hwL2MacTraps 9 }
hwRecIllegalMacPktAlarm NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"The MAC addresses that received are illegal."
::= { hwL2MacTraps 10 }
hwMacLimitOverThresholdAlarm NOTIFICATION-TYPE
OBJECTS { hwBaseTrapSeverity, hwBaseTrapProbableCause, hwBaseTrapEventType, hwMacDynAddressLearnNum, hwMacLimitMaxMac, hwL2IfPortName, hwMacLimitVlanId, hwMacLimitVsiName}
STATUS current
DESCRIPTION
"Beyond the mac limited learning number ."
::= { hwL2MacTraps 11 }
hwMacFlappingAlarm NOTIFICATION-TYPE
OBJECTS { hwBaseTrapSeverity, hwBaseTrapProbableCause, hwBaseTrapEventType, hwMacflappingMac, hwMacFlappingVlan, hwL2IfPortName, hwL2IfPortName, entPhysicalName}
STATUS current
DESCRIPTION
" Mac flapping alarm ."
::= { hwL2MacTraps 12 }
hwSlotMacLimitNumRaisingThreshold NOTIFICATION-TYPE
OBJECTS { hwBaseTrapSeverity, hwBaseTrapProbableCause, hwBaseTrapEventType, hwMacDynAddressLearnNum, hwMacLimitMaxMac, entPhysicalName, entPhysicalName}
STATUS current
DESCRIPTION
"The number of MAC addresses that are learnt based on the SLOT reaches
the upper limit."
::= { hwL2MacTraps 13 }
hwSlotMacLimitNumFallingThreshold NOTIFICATION-TYPE
OBJECTS { hwBaseTrapSeverity, hwBaseTrapProbableCause, hwBaseTrapEventType, hwMacDynAddressLearnNum, hwMacLimitMaxMac, entPhysicalName, entPhysicalName}
STATUS current
DESCRIPTION
"The number of MAC addresses that are learnt based on the SLOT falls below
the upper limit."
::= { hwL2MacTraps 14 }
hwL2ProtocolTunnelDropThresholdRaising NOTIFICATION-TYPE
OBJECTS { hwL2ProtocolTunnelTrapPortName, hwL2ProtocolTunnelTrapProtocolName, hwL2ProtocolTunnelTrapDropThreshold}
STATUS current
DESCRIPTION
"The number of the protocol transmit on the port reach the drop threshold."
::= { hwL2MacTraps 15 }
hwL2ProtocolTunnelDropThresholdFalling NOTIFICATION-TYPE
OBJECTS { hwL2ProtocolTunnelTrapPortName, hwL2ProtocolTunnelTrapProtocolName, hwL2ProtocolTunnelTrapDropThreshold}
STATUS current
DESCRIPTION
"The number of the protocol transmit on the port below the drop threshold."
::= { hwL2MacTraps 16 }
hwVsiMacLimitNumRaisingThresholdAlarm NOTIFICATION-TYPE
OBJECTS { hwBaseTrapSeverity, hwBaseTrapProbableCause, hwBaseTrapEventType, hwMacLimitVsiName}
STATUS current
DESCRIPTION
"The vsi Beyond the mac limited learning number ."
::= { hwL2MacTraps 17 }
hwVsiMacLimitNumRaisingThresholdAlarmClear NOTIFICATION-TYPE
OBJECTS { hwBaseTrapSeverity, hwBaseTrapProbableCause, hwBaseTrapEventType, hwMacLimitVsiName}
STATUS current
DESCRIPTION
"The vsi release from the mac limited learning number ."
::= { hwL2MacTraps 18 }
hwMacLimitOverThresholdAlarmResume NOTIFICATION-TYPE
OBJECTS { hwBaseTrapSeverity, hwBaseTrapProbableCause, hwBaseTrapEventType, hwMacDynAddressLearnNum, hwMacLimitMaxMac, hwL2IfPortName, hwMacLimitVlanId, hwMacLimitVsiName}
STATUS current
DESCRIPTION
"Less than the mac limited learning number ."
::= { hwL2MacTraps 19 }
hwSlotMacNumRaisingThreshold NOTIFICATION-TYPE
OBJECTS { hwMacSlotStatistics, hwMacSlotStatisticsSpecify}
STATUS current
DESCRIPTION
"This notification indicates the MAC usage of the slot raising the threshold."
::= { hwL2MacTraps 20 }
hwSlotMacNumFallingThreshold NOTIFICATION-TYPE
OBJECTS { hwMacSlotStatistics, hwMacSlotStatisticsSpecify}
STATUS current
DESCRIPTION
"This notification indicates the MAC usage of the slot falling the threshold."
::= { hwL2MacTraps 21 }
-- untarget mac number
hwUntargetMacNum OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of untarget mac-address."
::= { hwL2MAMObjects 8 }
-- mac-address aging-time
hwMacAgingTime OBJECT-TYPE
SYNTAX Integer32 (10..1000000 | 0)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interval that the hardware deletes any entry
whose hit bit is cleared and clears the hit bit
of the remaining entries.The default value is 300 seconds.'0'means the MAC entries will be
never aged."
::= { hwL2MAMObjects 9 }
-- mac-address restrict
hwMacRestrict OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether MAC address learning
restrict has been enabled for the system."
::= { hwL2MAMObjects 10 }
-- port-security
hwPortSecurityTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPortSecurityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the port security information for device.
It can protect the port from inaccessible mac."
::= { hwL2MAMObjects 11 }
hwPortSecurityEntry OBJECT-TYPE
SYNTAX HwPortSecurityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the port security table."
INDEX { hwPortSecurityPort }
::= { hwPortSecurityTable 1 }
HwPortSecurityEntry ::=
SEQUENCE {
hwPortSecurityPort
InterfaceIndexOrZero,
hwPortSecurityEnabled
EnabledStatus,
hwPortSecurityProtectAction
INTEGER,
hwPortSecurityAllDynToStaticEnable
EnableValue,
hwPortSecurityAllDynToStickyEnable
EnableValue,
hwPortSecurityMaxMacNum
Integer32
}
hwPortSecurityPort OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port number which will be configured port security."
::= { hwPortSecurityEntry 1 }
hwPortSecurityEnabled OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is set to 'enabled(1)' Port security
is enabled on this port else disabled."
::= { hwPortSecurityEntry 2 }
hwPortSecurityProtectAction OBJECT-TYPE
SYNTAX INTEGER
{
restrict(1),
protect(2),
shutdown(3),
noaction(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port security protect action of this entry. The
meanings of the values are:
restrict(1)- shutdown the port
protect(2)- discard the unknow source mac packets and not learn
shutdown(3)- send trap
noaction(4)- broadcast the packet ."
::= { hwPortSecurityEntry 3 }
hwPortSecurityAllDynToStaticEnable OBJECT-TYPE
SYNTAX EnableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is set to 'enable(1)' all dynamic mac-address on the Port
will convert to static."
::= { hwPortSecurityEntry 4 }
hwPortSecurityAllDynToStickyEnable OBJECT-TYPE
SYNTAX EnableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is set to enable and port security is enabled,
the dynamic MAC address entry will be changed to a sticky MAC address entry."
::= { hwPortSecurityEntry 5 }
hwPortSecurityMaxMacNum OBJECT-TYPE
SYNTAX Integer32 (0..16384)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum mac address can be learned based on the port."
::= { hwPortSecurityEntry 6 }
-- MacLimitGlobalRule
hwMacLimitGlobalRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMacLimitGlobalRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the global mac-address learning-limit rules information for device."
::= { hwL2MAMObjects 12 }
hwMacLimitGlobalRuleEntry OBJECT-TYPE
SYNTAX HwMacLimitGlobalRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the global mac-address learning-limit rule table."
INDEX { hwMacLimitGlobalRuleName }
::= { hwMacLimitGlobalRuleTable 1 }
HwMacLimitGlobalRuleEntry ::=
SEQUENCE {
hwMacLimitGlobalRuleName
OCTET STRING,
hwMacLimitRuleMaxMac
Integer32,
hwMacLimitRuleMaxRate
Integer32,
hwMacLimitRuleAction
INTEGER,
hwMacLimitRuleAlarm
INTEGER,
hwMacLimitRuleRowstatus
RowStatus
}
hwMacLimitGlobalRuleName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The global mac-address learning-limit rule name."
::= { hwMacLimitGlobalRuleEntry 1 }
hwMacLimitRuleMaxMac OBJECT-TYPE
SYNTAX Integer32(0..131072)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum mac address. When the value is '0',
the meaning is that there isn't limiting rule to
the mac-address number."
::= { hwMacLimitGlobalRuleEntry 11 }
hwMacLimitRuleMaxRate OBJECT-TYPE
SYNTAX Integer32(0..1000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The max mac-address learning rate. When the valu
e is '0', the meaning is that there isn't limiting
rule to the learning rate."
::= { hwMacLimitGlobalRuleEntry 12 }
hwMacLimitRuleAction OBJECT-TYPE
SYNTAX INTEGER
{
discard(1),
forward(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mac-address limit action of this entry. The
meanings of the values are:
discard(1)- Discard packets
forward(2)- Forward packets."
::= { hwMacLimitGlobalRuleEntry 13 }
hwMacLimitRuleAlarm OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mac-limit alarm switch of this entry. The meanings of
the values are:
disable(1), enable(2)"
::= { hwMacLimitGlobalRuleEntry 14 }
hwMacLimitRuleRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The operating state of the row."
::= { hwMacLimitGlobalRuleEntry 51 }
-- MacLimitApplyTable
hwMacLimitApplyRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMacLimitApplyRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the global mac-address learning-limit rules and apply ports."
::= { hwL2MAMObjects 13 }
hwMacLimitApplyRuleEntry OBJECT-TYPE
SYNTAX HwMacLimitApplyRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the global mac-address learning-limit rules and apply ports table."
INDEX { hwMacLimitApplyPort, hwMacLimitApplyVlanId }
::= { hwMacLimitApplyRuleTable 1 }
HwMacLimitApplyRuleEntry ::=
SEQUENCE {
hwMacLimitApplyPort
InterfaceIndexOrZero,
hwMacLimitApplyVlanId
Integer32,
hwMacLimitApplyRuleName
OCTET STRING,
hwMacLimitApplyRowstatus
RowStatus
}
hwMacLimitApplyPort OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port number which apply the global mac-address learning-limit rule."
::= { hwMacLimitApplyRuleEntry 1 }
hwMacLimitApplyVlanId OBJECT-TYPE
SYNTAX Integer32(0..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vlan id which apply the global mac-address learning-limit rule."
::= { hwMacLimitApplyRuleEntry 2 }
hwMacLimitApplyRuleName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The global mac-address learning-limit rule name."
::= { hwMacLimitApplyRuleEntry 11 }
hwMacLimitApplyRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The operating state of the row."
::= { hwMacLimitApplyRuleEntry 51 }
hwMacGlobalStatistics OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the global mac-address items."
::= { hwL2MAMObjects 14 }
hwMacIfStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMacIfStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table showing the number of mac-address items by interface index."
::= { hwL2MAMObjects 15 }
hwMacIfStatisticsEntry OBJECT-TYPE
SYNTAX HwMacIfStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the statistics of mac-address table."
INDEX { hwMacIfStatisticsIfIndex }
::= { hwMacIfStatisticsTable 1 }
HwMacIfStatisticsEntry ::=
SEQUENCE {
hwMacIfStatisticsIfIndex
InterfaceIndex,
hwMacIfStatistics
Integer32
}
hwMacIfStatisticsIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface index which is correlative to the hwIfMacStatistics table."
::= { hwMacIfStatisticsEntry 1 }
hwMacIfStatistics OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the mac-address items."
::= { hwMacIfStatisticsEntry 2 }
hwMacSlotStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMacSlotStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table showing the number of mac-address items by slot ID."
::= { hwL2MAMObjects 16 }
hwMacSlotStatisticsEntry OBJECT-TYPE
SYNTAX HwMacSlotStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the statistics of mac-address table."
INDEX { hwMacSlotStatisticsSlotId }
::= { hwMacSlotStatisticsTable 1 }
HwMacSlotStatisticsEntry ::=
SEQUENCE {
hwMacSlotStatisticsSlotId
Integer32,
hwMacSlotStatistics
Integer32,
hwMacSlotStatisticsSpecify
Integer32
}
hwMacSlotStatisticsSlotId OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The slot ID which is correlative to the hwMacSlotStatistics table."
::= { hwMacSlotStatisticsEntry 1 }
hwMacSlotStatistics OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the mac-address items by slot ID."
::= { hwMacSlotStatisticsEntry 2 }
hwMacSlotStatisticsSpecify OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The specify max number of the mac-address items by slot ID."
::= { hwMacSlotStatisticsEntry 3 }
hwMacVlanStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMacVlanStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table showing the number of mac-address items by VLAN ID."
::= { hwL2MAMObjects 17 }
hwMacVlanStatisticsEntry OBJECT-TYPE
SYNTAX HwMacVlanStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the statistics of mac-address table."
INDEX { hwMacVlanStatisticsVlanId }
::= { hwMacVlanStatisticsTable 1 }
HwMacVlanStatisticsEntry ::=
SEQUENCE {
hwMacVlanStatisticsVlanId
VlanId,
hwMacVlanStatistics
Integer32
}
hwMacVlanStatisticsVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN ID which is correlative to the hwMacVlanStatistics table."
::= { hwMacVlanStatisticsEntry 1 }
hwMacVlanStatistics OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the mac-address items."
::= { hwMacVlanStatisticsEntry 2 }
hwMacVsiStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMacVsiStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table showing the number of mac-address items by VSI name."
::= { hwL2MAMObjects 18 }
hwMacVsiStatisticsEntry OBJECT-TYPE
SYNTAX HwMacVsiStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the statistics of mac-address table."
INDEX { hwMacVsiStatisticsVsiName }
::= { hwMacVsiStatisticsTable 1 }
HwMacVsiStatisticsEntry ::=
SEQUENCE {
hwMacVsiStatisticsVsiName
OCTET STRING,
hwMacVsiStatistics
Integer32
}
hwMacVsiStatisticsVsiName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VSI name which is correlative to the hwMacVsiStatistics table."
::= { hwMacVsiStatisticsEntry 1 }
hwMacVsiStatistics OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the mac-address items."
::= { hwMacVsiStatisticsEntry 2 }
-- PwMacLimit
hwPwMacLimitTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPwMacLimitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a rule table for PW-based MAC learning limit."
::= { hwL2MAMObjects 19 }
hwPwMacLimitEntry OBJECT-TYPE
SYNTAX HwPwMacLimitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of a rule table for PW-based MAC learning limit."
INDEX { hwPwMacLimitVsiName,hwPwMacLimitPwName }
::= { hwPwMacLimitTable 1 }
HwPwMacLimitEntry ::=
SEQUENCE {
hwPwMacLimitVsiName
OCTET STRING,
hwPwMacLimitPwName
OCTET STRING,
hwPwMacLimitMaxMac
Integer32,
hwPwMacLimitMaxRate
Integer32,
hwPwMacLimitAction
INTEGER,
hwPwMacLimitAlarm
EnabledStatus,
hwPwMacLimitRowstatus
RowStatus,
hwPwMacAddressLearn
EnabledStatus,
hwPwMacDynAddressLearnNum
Integer32
}
hwPwMacLimitVsiName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the name of the VSI that is configured with
PW-based MAC learning limit."
::= { hwPwMacLimitEntry 1 }
hwPwMacLimitPwName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the name of the PW that is configured with
PW-based MAC learning limit."
::= { hwPwMacLimitEntry 2 }
hwPwMacLimitMaxMac OBJECT-TYPE
SYNTAX Integer32(0..131072)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object specifies the maximum number of MAC
addresses that can be learnt. 0 indicates no limit."
::= { hwPwMacLimitEntry 3 }
hwPwMacLimitMaxRate OBJECT-TYPE
SYNTAX Integer32(0..1000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object specifies the maximum rate for MAC
address learning. 0 indicates no limit."
::= { hwPwMacLimitEntry 4 }
hwPwMacLimitAction OBJECT-TYPE
SYNTAX INTEGER
{
discard(1),
forward(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object specifies whether packets are forwarded
or discarded after the number of MAC addresses that are learnt
reaches the upper limit:
1: packets are discarded
2: packets are forwarded"
::= { hwPwMacLimitEntry 5 }
hwPwMacLimitAlarm OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object specifies whether the alarm is enabled
or disabled after the number of MAC addresses that are learnt reaches
the upper limit:
1: alarm is enabled
2: alarm is disabled"
::= { hwPwMacLimitEntry 6 }
hwPwMacLimitRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the RowStatus of hwPwMacLimitTable."
::= { hwPwMacLimitEntry 7 }
hwPwMacAddressLearn OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates whether MAC learning is enabled."
::= { hwPwMacLimitEntry 8 }
hwPwMacDynAddressLearnNum OBJECT-TYPE
SYNTAX Integer32(0..131072)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object specifies the number of dynamic MAC
addresses that are learnt."
::= { hwPwMacLimitEntry 9 }
hwMacSpoofingDefendTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMacSpoofingDefendEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table enable the MAC spoofing defend."
::= { hwL2MAMObjects 20 }
hwMacSpoofingDefendEntry OBJECT-TYPE
SYNTAX HwMacSpoofingDefendEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the MAC spoofing defend table."
INDEX { hwMacSpoofingDefendPort }
::= { hwMacSpoofingDefendTable 1 }
HwMacSpoofingDefendEntry ::=
SEQUENCE {
hwMacSpoofingDefendPort
InterfaceIndexOrZero,
hwMacSpoofingDefendEnabled
EnabledStatus
}
hwMacSpoofingDefendPort OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port number which will be configured 1.1.1 MAC spoofing defend."
::= { hwMacSpoofingDefendEntry 1 }
hwMacSpoofingDefendEnabled OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is set to 'enabled(1)' MAC spoofing defend
is enabled on this port else disabled."
::= { hwMacSpoofingDefendEntry 2 }
hwDiscardIllegalMacEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is set to 'enabled(1)' illegal MAC will be discarded."
::= { hwL2MAMObjects 21 }
hwDiscardIllegalMacAlarm OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is set to 'enabled(1)' discard illegal MAC alarm
is enabled else disabled."
::= { hwL2MAMObjects 22 }
hwMacSpoofingDefend OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is set to 'enabled(1)' MAC spoofing defend
is enabled on global else disabled."
::= { hwL2MAMObjects 23 }
hwL2MacFlappingTrapObjects OBJECT IDENTIFIER ::= { hwL2MAMObjects 24 }
hwMacflappingMac OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The flapping mac-address."
::= { hwL2MacFlappingTrapObjects 1 }
hwMacFlappingVlan OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The vlan of flapping mac."
::= { hwL2MacFlappingTrapObjects 2 }
-- SlotMacLimit
hwSlotMacLimitTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwSlotMacLimitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a rule table for SLOT-based MAC learning limit."
::= { hwL2MAMObjects 25 }
hwSlotMacLimitEntry OBJECT-TYPE
SYNTAX HwSlotMacLimitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of a rule table for SLOT-based MAC learning limit."
INDEX { hwSlotMacLimitId }
::= { hwSlotMacLimitTable 1 }
HwSlotMacLimitEntry ::=
SEQUENCE {
hwSlotMacLimitId
Integer32,
hwSlotMacLimitMaxMac
Integer32,
hwSlotMacLimitMaxRate
Integer32,
hwSlotMacLimitAction
INTEGER,
hwSlotMacLimitAlarm
INTEGER,
hwSlotMacLimitRowstatus
RowStatus
}
hwSlotMacLimitId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates id of the SLOT that is configured with
SLOT-based MAC learning limit."
::= { hwSlotMacLimitEntry 1 }
hwSlotMacLimitMaxMac OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object specifies the maximum number of MAC
addresses that can be learnt. 0 indicates no limit."
::= { hwSlotMacLimitEntry 2 }
hwSlotMacLimitMaxRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object specifies the maximum rate for MAC
address learning. 0 indicates no limit."
::= { hwSlotMacLimitEntry 3 }
hwSlotMacLimitAction OBJECT-TYPE
SYNTAX INTEGER
{
discard(1),
forward(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object specifies whether packets are forwarded
or discarded after the number of MAC addresses that are learnt
reaches the upper limit:
1: packets are discarded
2: packets are forwarded"
::= { hwSlotMacLimitEntry 4 }
hwSlotMacLimitAlarm OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object specifies whether the alarm is enabled
or disabled after the number of MAC addresses that are learnt reaches
the upper limit:
1: alarm is enabled
2: alarm is disabled"
::= { hwSlotMacLimitEntry 5 }
hwSlotMacLimitRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the RowStatus of hwSlotMacLimitTable."
::= { hwSlotMacLimitEntry 6 }
hwL2ProtocolTunnelTrapObjects OBJECT IDENTIFIER ::= { hwL2MAMObjects 26 }
hwL2ProtocolTunnelTrapPortName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The port name for layer 2 protocol tunnel trap."
::= { hwL2ProtocolTunnelTrapObjects 1 }
hwL2ProtocolTunnelTrapProtocolName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The protocol name for layer 2 protocol tunnel trap."
::= { hwL2ProtocolTunnelTrapObjects 2 }
hwL2ProtocolTunnelTrapDropThreshold OBJECT-TYPE
SYNTAX Integer32 (1..4096)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The drop rangle of layer 2 protocol tunnel."
::= { hwL2ProtocolTunnelTrapObjects 3 }
hwL2ProtclTnlStdTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2ProtclTnlStdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Group-MAC configuration table of standard L2 protocol tunnel."
::= { hwL2MAMObjects 27 }
hwL2ProtclTnlStdEntry OBJECT-TYPE
SYNTAX HwL2ProtclTnlStdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates Group-MAC configuration table for standard L2 protocol tunnel."
INDEX { hwL2ProtclTnlStdProtclName }
::= { hwL2ProtclTnlStdTable 1 }
HwL2ProtclTnlStdEntry ::=
SEQUENCE
{
hwL2ProtclTnlStdProtclName
OCTET STRING,
hwL2ProtclTnlStdProtclMacAddr
MacAddress,
hwL2ProtclTnlStdEncapType
INTEGER,
hwL2ProtclTnlStdProtclType
Integer32,
hwL2ProtclTnlStdGroupMacAddr
MacAddress,
hwL2ProtclTnlStdGroupDefault
MacAddress,
hwL2ProtclTnlStdPriority
Integer32
}
hwL2ProtclTnlStdProtclName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates protocol name of standard L2 protocol tunnel."
::= { hwL2ProtclTnlStdEntry 1 }
hwL2ProtclTnlStdProtclMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates protocol MAC-Address of standard L2 protocol tunnel."
::= { hwL2ProtclTnlStdEntry 2 }
hwL2ProtclTnlStdEncapType OBJECT-TYPE
SYNTAX INTEGER
{
ethernetii(1),
snap(2),
llc(3),
others(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates encapsulation type of standard L2 protocol tunnel."
::= { hwL2ProtclTnlStdEntry 3 }
hwL2ProtclTnlStdProtclType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates protocol type of standard L2 protocol tunnel."
::= { hwL2ProtclTnlStdEntry 4 }
hwL2ProtclTnlStdGroupMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates group-MAC of standard L2 protocol tunnel."
::= { hwL2ProtclTnlStdEntry 5 }
hwL2ProtclTnlStdGroupDefault OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates default group-MAC(0100-0ccd-cdd0) of standard L2 protocol tunnel."
::= { hwL2ProtclTnlStdEntry 6 }
hwL2ProtclTnlStdPriority OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates priority of standard L2 protocol tunnel."
::= { hwL2ProtclTnlStdEntry 7 }
hwL2ProtclTnlCusTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2ProtclTnlCusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Group-MAC configuration table of customize L2 protocol tunnel."
::= { hwL2MAMObjects 28 }
hwL2ProtclTnlCusEntry OBJECT-TYPE
SYNTAX HwL2ProtclTnlCusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates Group-MAC configuration table for customize L2 protocol tunnel."
INDEX { hwL2ProtclTnlCusProtclName }
::= { hwL2ProtclTnlCusTable 1 }
HwL2ProtclTnlCusEntry ::=
SEQUENCE
{
hwL2ProtclTnlCusProtclName
OCTET STRING,
hwL2ProtclTnlCusProtclMacAddr
MacAddress,
hwL2ProtclTnlCusEncapType
INTEGER,
hwL2ProtclTnlCusProtclType
Integer32,
hwL2ProtclTnlCusGroupMacAddr
MacAddress,
hwL2ProtclTnlCusGroupDefault
MacAddress,
hwL2ProtclTnlCusPriority
Integer32,
hwL2ProtclTnlCusRowStatus
RowStatus
}
hwL2ProtclTnlCusProtclName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates protocol name of customize L2 protocol tunnel."
::= { hwL2ProtclTnlCusEntry 1 }
hwL2ProtclTnlCusProtclMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates protocol MAC-Address of customize L2 protocol tunnel."
::= { hwL2ProtclTnlCusEntry 2 }
hwL2ProtclTnlCusEncapType OBJECT-TYPE
SYNTAX INTEGER
{
ethernetii(1),
snap(2),
llc(3),
others(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates encapsulation type of customize L2 protocol tunnel."
::= { hwL2ProtclTnlCusEntry 3 }
hwL2ProtclTnlCusProtclType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates protocol type of customize L2 protocol tunnel."
::= { hwL2ProtclTnlCusEntry 4 }
hwL2ProtclTnlCusGroupMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates group-MAC of customize L2 protocol tunnel."
::= { hwL2ProtclTnlCusEntry 5 }
hwL2ProtclTnlCusGroupDefault OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates default group-MAC(0100-0ccd-cdd0) of customize L2 protocol tunnel."
::= { hwL2ProtclTnlCusEntry 6 }
hwL2ProtclTnlCusPriority OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates priority of customize L2 protocol tunnel."
::= { hwL2ProtclTnlCusEntry 7 }
hwL2ProtclTnlCusRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used for controlling the creation and deletion of this
row. All writeable objects in this row may be modified at any time.
If a Network Management Application attempts to delete a conceptual
row by setting this object to 'destroy' and there are one or more entries
in hwQinQSubIfTermTable pointing to the row, the agent must also
destroy the corresponding entries in hwL2ProtclTnlCusTable."
::= { hwL2ProtclTnlCusEntry 8 }
hwL2ProtclTnlEnableTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2ProtclTnlEnableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port configuration table of L2 protocol tunnel."
::= { hwL2MAMObjects 29 }
hwL2ProtclTnlEnableEntry OBJECT-TYPE
SYNTAX HwL2ProtclTnlEnableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates port configuration table of L2 protocol tunnel."
INDEX { hwL2ProtclTnlEnableIfIndex, hwL2ProtclTnlEnableProtclName }
::= { hwL2ProtclTnlEnableTable 1 }
HwL2ProtclTnlEnableEntry ::=
SEQUENCE
{
hwL2ProtclTnlEnableIfIndex
InterfaceIndex,
hwL2ProtclTnlEnableProtclName
OCTET STRING,
hwL2ProtclTnlEnableTransMode
INTEGER,
hwL2ProtclTnlEnableTagListLow
OCTET STRING,
hwL2ProtclTnlEnableTagListHigh
OCTET STRING,
hwL2ProtclTnlEnableDropthresholdRate
Integer32,
hwL2ProtclTnlEnableRowStatus
RowStatus
}
hwL2ProtclTnlEnableIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates interface index of port configuration of L2 protocol tunnel."
::= { hwL2ProtclTnlEnableEntry 1 }
hwL2ProtclTnlEnableProtclName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates protocol name of port configuration of L2 protocol tunnel."
::= { hwL2ProtclTnlEnableEntry 2 }
hwL2ProtclTnlEnableTransMode OBJECT-TYPE
SYNTAX INTEGER
{
tagged(1),
untagged(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates transparent mode of port configuration of L2 protocol tunnel."
::= { hwL2ProtclTnlEnableEntry 3 }
hwL2ProtclTnlEnableTagListLow OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates VLAN list low of port configuration of L2 protocol tunnel."
::= { hwL2ProtclTnlEnableEntry 4 }
hwL2ProtclTnlEnableTagListHigh OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates VLAN list high of port configuration of L2 protocol tunnel."
::= { hwL2ProtclTnlEnableEntry 5 }
hwL2ProtclTnlEnableDropthresholdRate OBJECT-TYPE
SYNTAX Integer32 (0..4096)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates drop threshold rate(packet per second) of port configuration
of L2 protocol tunnel."
::= { hwL2ProtclTnlEnableEntry 6 }
hwL2ProtclTnlEnableRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used for controlling the creation and deletion of this
row. All writeable objects in this row may be modified at any time.
If a Network Management Application attempts to delete a conceptual
row by setting this object to 'destroy' and there are one or more entries
in hwQinQSubIfTermTable pointing to the row, the agent must also
destroy the corresponding entries in hwL2ProtclTnlEnableTable."
::= { hwL2ProtclTnlEnableEntry 7 }
hwL2ProtclTnlStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwL2ProtclTnlStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics table of L2 protocol tunnel."
::= { hwL2MAMObjects 30 }
hwL2ProtclTnlStatisticsEntry OBJECT-TYPE
SYNTAX HwL2ProtclTnlStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates statistics table of L2 protocol tunnel."
INDEX { hwL2ProtclTnlStatisticsIfIndex, hwL2ProtclTnlStatisticsProtclName }
::= { hwL2ProtclTnlStatisticsTable 1 }
HwL2ProtclTnlStatisticsEntry ::=
SEQUENCE
{
hwL2ProtclTnlStatisticsIfIndex
InterfaceIndex,
hwL2ProtclTnlStatisticsProtclName
OCTET STRING,
hwL2ProtclTnlStatisticsDropthrhldRate
Integer32,
hwL2ProtclTnlStatisticsInputPkts
Integer32,
hwL2ProtclTnlStatisticsOutputPkts
Integer32,
hwL2ProtclTnlStatisticsDropPkts
Integer32
}
hwL2ProtclTnlStatisticsIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates interface index of statistics table of L2 protocol tunnel."
::= { hwL2ProtclTnlStatisticsEntry 1 }
hwL2ProtclTnlStatisticsProtclName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates protocol name of statistics table of L2 protocol tunnel."
::= { hwL2ProtclTnlStatisticsEntry 2 }
hwL2ProtclTnlStatisticsDropthrhldRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates drop threshold rate(packets per second) of statistics table of
L2 protocol tunnel."
::= { hwL2ProtclTnlStatisticsEntry 3 }
hwL2ProtclTnlStatisticsInputPkts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of input packets of statistics table of L2 protocol tunnel."
::= { hwL2ProtclTnlStatisticsEntry 4 }
hwL2ProtclTnlStatisticsOutputPkts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of output packets of statistics table of L2 protocol tunnel."
::= { hwL2ProtclTnlStatisticsEntry 5 }
hwL2ProtclTnlStatisticsDropPkts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of drop packets of statistics table of L2 protocol tunnel."
::= { hwL2ProtclTnlStatisticsEntry 6 }
-- mac-address aging-time
hwBridgeMacAgingTime OBJECT-TYPE
SYNTAX Integer32 (60..1000000 | 0)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interval that the hardware deletes any entry
whose hit bit is cleared and clears the hit bit
of the remaining entries.The default value is 300 seconds.'0'means the MAC entries will be
never aged."
::= { hwL2MAMObjects 31 }
-- MAC better maintenance
hwCfgMacAddrQueryTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCfgMacAddrQueryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The query table of layer 2 Configured mac-address forwarding table."
::= { hwL2MAMObjects 32 }
hwCfgMacAddrQueryEntry OBJECT-TYPE
SYNTAX HwCfgMacAddrQueryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Match entries of layer 2 Configured mac-address forwarding table lookup."
INDEX { hwCfgMacAddrQueryVlanId,
hwCfgMacAddrQueryVsiName,
hwCfgMacAddrQuerySiName,
hwCfgMacAddrQueryBridgeId,
hwCfgMacAddrQueryMacAddr,
hwCfgMacAddrQueryConditionMode,
hwCfgMacAddrQueryConditionStringA,
hwCfgMacAddrQueryConditionStringB,
hwCfgMacAddrQueryConditionDigitA,
hwCfgMacAddrQueryConditionDigitB,
hwCfgMacAddrQueryConditionDigitC
}
::= { hwCfgMacAddrQueryTable 1 }
HwCfgMacAddrQueryEntry ::=
SEQUENCE {
hwCfgMacAddrQueryVlanId
VlanIdOrNone,
hwCfgMacAddrQueryVsiName
OCTET STRING,
hwCfgMacAddrQuerySiName
OCTET STRING,
hwCfgMacAddrQueryBridgeId
Integer32,
hwCfgMacAddrQueryMacAddr
MacAddress,
hwCfgMacAddrQueryConditionMode
INTEGER,
hwCfgMacAddrQueryConditionStringA
OCTET STRING,
hwCfgMacAddrQueryConditionStringB
OCTET STRING,
hwCfgMacAddrQueryConditionDigitA
Unsigned32,
hwCfgMacAddrQueryConditionDigitB
Unsigned32,
hwCfgMacAddrQueryConditionDigitC
Unsigned32,
hwCfgMacAddrQueryType
OCTET STRING,
hwCfgMacAddrQueryIfIndex
InterfaceIndexOrZero,
hwCfgMacAddrQueryPeVlanId
VlanIdOrNone,
hwCfgMacAddrQueryCeVlanId
VlanIdOrNone,
hwCfgMacAddrQueryCedefaultFlag
INTEGER,
hwCfgMacAddrQueryAtmIfIndex
InterfaceIndexOrZero,
hwCfgMacAddrQueryVpi
Integer32,
hwCfgMacAddrQueryVci
Integer32,
hwCfgMacAddrQueryMacTunnel
OCTET STRING
}
hwCfgMacAddrQueryVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN ID for index of layer 2 Configured mac-address query table."
::= { hwCfgMacAddrQueryEntry 1 }
hwCfgMacAddrQueryVsiName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vsi name for index of layer 2 Configured mac-address query table."
::= { hwCfgMacAddrQueryEntry 2 }
hwCfgMacAddrQuerySiName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The service instance name for index of layer 2 Configured mac-address query table."
::= { hwCfgMacAddrQueryEntry 3 }
hwCfgMacAddrQueryBridgeId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The bridge ID for index of layer 2 Configured mac-address query table."
::= { hwCfgMacAddrQueryEntry 4 }
hwCfgMacAddrQueryMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A unicast MAC address for index of layer 2 Configured mac-address query table."
::= { hwCfgMacAddrQueryEntry 5 }
hwCfgMacAddrQueryConditionMode OBJECT-TYPE
SYNTAX INTEGER
{
showall(1),
showbymac(2),
showbymacvlan(3),
showbytype(4),
showbytypevlan(5),
showbytypeport(6),
showbytypeportvlan(7),
showbyvlan(8),
showbyport(9),
showbyportvlan(10),
showbymacvsi(11),
showbytypevsi(12),
showbytypeportvsi(13),
showbyvsi(14),
showbyportvsi(15)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Mode for query condition of layer 2 Configured mac-address query table."
::= { hwCfgMacAddrQueryEntry 6 }
hwCfgMacAddrQueryConditionStringA OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"String A (may be VSI or SI etc.) for query condition of layer 2 Configured mac-address query table."
::= { hwCfgMacAddrQueryEntry 7 }
hwCfgMacAddrQueryConditionStringB OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"String B (may be MAC or MAC type etc.) for query condition of layer 2 Configured mac-address query table."
::= { hwCfgMacAddrQueryEntry 8 }
hwCfgMacAddrQueryConditionDigitA OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Digit A (may be VLAN ID etc.) for query condition of layer 2 Configured mac-address query table."
::= { hwCfgMacAddrQueryEntry 9 }
hwCfgMacAddrQueryConditionDigitB OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Digit B (may be IF index etc.) for query condition of layer 2 Configured mac-address query table."
::= { hwCfgMacAddrQueryEntry 10 }
hwCfgMacAddrQueryConditionDigitC OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Digit C (other integer info) for query condition of layer 2 Configured mac-address query table."
::= { hwCfgMacAddrQueryEntry 11 }
hwCfgMacAddrQueryType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entry type for match item of layer 2 Configured mac-address query table."
::= { hwCfgMacAddrQueryEntry 12 }
hwCfgMacAddrQueryIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index for match item of layer 2 Configured mac-address query table."
::= { hwCfgMacAddrQueryEntry 13 }
hwCfgMacAddrQueryPeVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The PE VLAN ID for match item of layer 2 Configured mac-address query table."
::= { hwCfgMacAddrQueryEntry 14 }
hwCfgMacAddrQueryCeVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CE VLAN ID for match item of layer 2 Configured mac-address query table."
::= { hwCfgMacAddrQueryEntry 15 }
hwCfgMacAddrQueryCedefaultFlag OBJECT-TYPE
SYNTAX INTEGER
{
nocedefault(0),
cedefault(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CE default flag for match item of layer 2 Configured mac-address query table."
::= { hwCfgMacAddrQueryEntry 16 }
hwCfgMacAddrQueryAtmIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ATM interface index for match item of layer 2 Configured mac-address query table."
::= { hwCfgMacAddrQueryEntry 17 }
hwCfgMacAddrQueryVpi OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VPI for match item of layer 2 Configured mac-address query table."
::= { hwCfgMacAddrQueryEntry 18 }
hwCfgMacAddrQueryVci OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VCI for match item of layer 2 Configured mac-address query table."
::= { hwCfgMacAddrQueryEntry 19 }
hwCfgMacAddrQueryMacTunnel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC tunnel for match item of layer 2 Configured mac-address query table."
::= { hwCfgMacAddrQueryEntry 20 }
hwDynMacAddrQueryTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDynMacAddrQueryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The query table of layer 2 dynamic mac-address forwarding table."
::= { hwL2MAMObjects 33 }
hwDynMacAddrQueryEntry OBJECT-TYPE
SYNTAX HwDynMacAddrQueryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Match entries of layer 2 dynamic mac-address forwarding table lookup."
INDEX { hwDynMacAddrQueryVlanId,
hwDynMacAddrQueryVsiName,
hwDynMacAddrQuerySiName,
hwDynMacAddrQueryBridgeId,
hwDynMacAddrQueryMacAddr,
hwDynMacAddrQueryConditionMode,
hwDynMacAddrQueryConditionStringA,
hwDynMacAddrQueryConditionStringB,
hwDynMacAddrQueryConditionDigitA,
hwDynMacAddrQueryConditionDigitB,
hwDynMacAddrQueryConditionDigitC
}
::= { hwDynMacAddrQueryTable 1 }
HwDynMacAddrQueryEntry ::=
SEQUENCE {
hwDynMacAddrQueryVlanId
VlanIdOrNone,
hwDynMacAddrQueryVsiName
OCTET STRING,
hwDynMacAddrQuerySiName
OCTET STRING,
hwDynMacAddrQueryBridgeId
Integer32,
hwDynMacAddrQueryMacAddr
MacAddress,
hwDynMacAddrQueryConditionMode
INTEGER,
hwDynMacAddrQueryConditionStringA
OCTET STRING,
hwDynMacAddrQueryConditionStringB
OCTET STRING,
hwDynMacAddrQueryConditionDigitA
Unsigned32,
hwDynMacAddrQueryConditionDigitB
Unsigned32,
hwDynMacAddrQueryConditionDigitC
Unsigned32,
hwDynMacAddrQueryType
OCTET STRING,
hwDynMacAddrQueryIfIndex
InterfaceIndexOrZero,
hwDynMacAddrQueryPeVlanId
VlanIdOrNone,
hwDynMacAddrQueryCeVlanId
VlanIdOrNone,
hwDynMacAddrQueryAtmIfIndex
InterfaceIndexOrZero,
hwDynMacAddrQueryVpi
Integer32,
hwDynMacAddrQueryVci
Integer32,
hwDynMacAddrQueryPeerIp
IpAddress,
hwDynMacAddrQueryPwId
Unsigned32,
hwDynMacAddrQueryMacTunnel
OCTET STRING,
hwDynMacAddrQueryAgingTime
Integer32
}
hwDynMacAddrQueryVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN ID for index of layer 2 dynamic mac-address query table."
::= { hwDynMacAddrQueryEntry 1 }
hwDynMacAddrQueryVsiName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vsi name for index of layer 2 dynamic mac-address query table."
::= { hwDynMacAddrQueryEntry 2 }
hwDynMacAddrQuerySiName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The service instance name for index of layer 2 dynamic mac-address query table."
::= { hwDynMacAddrQueryEntry 3 }
hwDynMacAddrQueryBridgeId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The bridge ID for index of layer 2 dynamic mac-address query table."
::= { hwDynMacAddrQueryEntry 4 }
hwDynMacAddrQueryMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A unicast MAC address for index of layer 2 dynamic mac-address query table."
::= { hwDynMacAddrQueryEntry 5 }
hwDynMacAddrQueryConditionMode OBJECT-TYPE
SYNTAX INTEGER
{
showall(1),
showbymac(2),
showbymacvlan(3),
showbytype(4),
showbytypevlan(5),
showbytypeport(6),
showbytypeportvlan(7),
showbyvlan(8),
showbyport(9),
showbyportvlan(10),
showbymacvsi(11),
showbytypevsi(12),
showbytypeportvsi(13),
showbyvsi(14),
showbyportvsi(15),
showbyvsipw(16),
showbytypeslot(17),
showbytypeslotsourceslot(18),
showbytypeslotvlan(19),
showbytypeslotport(20),
showbytypeslotportvlan(21),
showbytypeslotvsi(22),
showbytypeslotportvsi(23),
showbytypeslotvsipw(24)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Mode for query condition of layer 2 dynamic mac-address query table."
::= { hwDynMacAddrQueryEntry 6 }
hwDynMacAddrQueryConditionStringA OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"String A (may be VSI or SI etc.) for query condition of layer 2 dynamic mac-address query table."
::= { hwDynMacAddrQueryEntry 7 }
hwDynMacAddrQueryConditionStringB OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"String B (may be MAC or MAC type etc.) for query condition of layer 2 dynamic mac-address query table."
::= { hwDynMacAddrQueryEntry 8 }
hwDynMacAddrQueryConditionDigitA OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Digit A (may be VLAN ID etc.) for query condition of layer 2 dynamic mac-address query table."
::= { hwDynMacAddrQueryEntry 9 }
hwDynMacAddrQueryConditionDigitB OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Digit B (may be IF index etc.) for query condition of layer 2 dynamic mac-address query table."
::= { hwDynMacAddrQueryEntry 10 }
hwDynMacAddrQueryConditionDigitC OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Digit C (other integer info) for query condition of layer 2 dynamic mac-address query table."
::= { hwDynMacAddrQueryEntry 11 }
hwDynMacAddrQueryType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entry type for match item of layer 2 dynamic mac-address query table."
::= { hwDynMacAddrQueryEntry 12 }
hwDynMacAddrQueryIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index for match item of layer 2 dynamic mac-address query table."
::= { hwDynMacAddrQueryEntry 13 }
hwDynMacAddrQueryPeVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The PE VLAN ID for match item of layer 2 dynamic mac-address query table."
::= { hwDynMacAddrQueryEntry 14 }
hwDynMacAddrQueryCeVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CE VLAN ID for match item of layer 2 dynamic mac-address query table."
::= { hwDynMacAddrQueryEntry 15 }
hwDynMacAddrQueryAtmIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ATM interface index for match item of layer 2 dynamic mac-address query table."
::= { hwDynMacAddrQueryEntry 16 }
hwDynMacAddrQueryVpi OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VPI for match item of layer 2 dynamic mac-address query table."
::= { hwDynMacAddrQueryEntry 17 }
hwDynMacAddrQueryVci OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VCI for match item of layer 2 dynamic mac-address query table."
::= { hwDynMacAddrQueryEntry 18 }
hwDynMacAddrQueryPeerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer ip address for match item of layer 2 dynamic mac-address query table."
::= { hwDynMacAddrQueryEntry 19 }
hwDynMacAddrQueryPwId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The PW ID for match item of layer 2 dynamic mac-address query table."
::= { hwDynMacAddrQueryEntry 20 }
hwDynMacAddrQueryMacTunnel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC tunnel for match item of layer 2 dynamic mac-address query table."
::= { hwDynMacAddrQueryEntry 21 }
hwDynMacAddrQueryAgingTime OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aging time for match item of layer 2 dynamic mac-address query table."
::= { hwDynMacAddrQueryEntry 22 }
hwMacInfoQueryTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMacInfoQueryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MAC address information of layer 2 mac-address database."
::= { hwL2MAMObjects 34 }
hwMacInfoQueryEntry OBJECT-TYPE
SYNTAX HwMacInfoQueryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Match information of layer 2 mac-address database."
INDEX { hwMacInfoQueryConditionMode,
hwMacInfoQueryConditionStringA,
hwMacInfoQueryConditionStringB,
hwMacInfoQueryConditionStringC,
hwMacInfoQueryConditionDigitA,
hwMacInfoQueryConditionDigitB,
hwMacInfoQueryConditionDigitC
}
::= { hwMacInfoQueryTable 1 }
HwMacInfoQueryEntry ::=
SEQUENCE {
hwMacInfoQueryConditionMode
INTEGER,
hwMacInfoQueryConditionStringA
OCTET STRING,
hwMacInfoQueryConditionStringB
OCTET STRING,
hwMacInfoQueryConditionStringC
OCTET STRING,
hwMacInfoQueryConditionDigitA
Unsigned32,
hwMacInfoQueryConditionDigitB
Unsigned32,
hwMacInfoQueryConditionDigitC
Unsigned32,
hwMacInfoQueryTotalNumber
Unsigned32,
hwMacInfoQueryTotalLocalNumber
Unsigned32,
hwMacInfoQueryTotalRemoteNumber
Unsigned32,
hwMacInfoQueryCapacity
Unsigned32
}
hwMacInfoQueryConditionMode OBJECT-TYPE
SYNTAX INTEGER
{
showtotalnumberbyall(1),
showtotalnumberbytype(2),
showtotalnumberbytypevlan(3),
showtotalnumberbytypeport(4),
showtotalnumberbytypeportvlan(5),
showtotalnumberbyvlan(6),
showtotalnumberbyport(7),
showtotalnumberbyportvlan(8),
showtotalnumberbytypevsi(9),
showtotalnumberbytypeportvsi(10),
showtotalnumberbyvsi(11),
showtotalnumberbyportvsi(12),
showtotalnumberbyvsipw(13),
showtotalnumberbytypeslot(14),
showtotalnumberbytypeslotvlan(15),
showtotalnumberbytypeslotport(16),
showtotalnumberbytypeslotportvlan(17),
showtotalnumberbytypeslotvsi(18),
showtotalnumberbytypeslotportvsi(19),
showtotalnumberbytypeslotvsipw(20),
showcapacity(21)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Mode for query condition of layer 2 dynamic mac-address query table."
::= { hwMacInfoQueryEntry 1 }
hwMacInfoQueryConditionStringA OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"String A (may be VSI or SI etc.) for query condition of layer 2 mac-address database."
::= { hwMacInfoQueryEntry 2 }
hwMacInfoQueryConditionStringB OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"String B (may be MAC or MAC type etc.) for query condition of layer 2 mac-address database."
::= { hwMacInfoQueryEntry 3 }
hwMacInfoQueryConditionStringC OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"String C (may be MAC tunnel etc.) for query condition of layer 2 mac-address database."
::= { hwMacInfoQueryEntry 4 }
hwMacInfoQueryConditionDigitA OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Digit A (may be VLAN ID etc.) for query condition of layer 2 mac-address database."
::= { hwMacInfoQueryEntry 5 }
hwMacInfoQueryConditionDigitB OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Digit B (may be IF index etc.) for query condition of layer 2 mac-address database."
::= { hwMacInfoQueryEntry 6 }
hwMacInfoQueryConditionDigitC OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Digit C (other integer info) for query condition of layer 2 mac-address database."
::= { hwMacInfoQueryEntry 7 }
hwMacInfoQueryTotalNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number for match condition of layer 2 mac-address database."
::= { hwMacInfoQueryEntry 8 }
hwMacInfoQueryTotalLocalNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total local number for match condition of layer 2 mac-address database."
::= { hwMacInfoQueryEntry 9 }
hwMacInfoQueryTotalRemoteNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total remote number for match condition of layer 2 mac-address database."
::= { hwMacInfoQueryEntry 10 }
hwMacInfoQueryCapacity OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The capacity for match condition of layer 2 mac-address database."
::= { hwMacInfoQueryEntry 11 }
-- -------------------------------------------------------------
-- IEEE 802.1Q MIB - Conformance Information
-- -------------------------------------------------------------
hwL2MAMConformance OBJECT IDENTIFIER ::= { hwL2MAM 2 }
hwL2MAMGroups OBJECT IDENTIFIER ::= { hwL2MAMConformance 1 }
hwL2MAMCompliances OBJECT IDENTIFIER
::= { hwL2MAMConformance 2 }
-- -------------------------------------------------------------
-- units of conformance
-- -------------------------------------------------------------
hwL2MAMCfgFdbGroup OBJECT-GROUP
OBJECTS {
hwCfgFdbPort,
hwCfgFdbType,
hwCfgFdbAtmPort,
hwCfgFdbVpi,
hwCfgFdbVci,
hwCfgFdbRowstatus,
hwCfgFdbCeDefault,
hwUntargetMacNum,
hwCfgFdbPeVlanId
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
level 2 configured mac-address table."
::= { hwL2MAMGroups 1 }
hwL2MAMDynFdbGroup OBJECT-GROUP
OBJECTS {
hwDynFdbPort,
hwDynFdbAtmPort,
hwDynFdbVpi,
hwDynFdbVci,
hwDynFdbRowstatus,
hwDynSecurityFdbToStaticEnable,
hwDynFdbPeVlanId
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
level 2 Dynamic mac-address table."
::= { hwL2MAMGroups 2 }
hwL2MAMMacLimitGroup OBJECT-GROUP
OBJECTS {
hwMacLimitMaxMac,
hwMacLimitMaxRate,
hwMacLimitAction,
hwMacLimitAlarm,
hwMacLimitRowstatus,
hwL2MaxMacLimit,
hwMacAddressLearn,
hwMacDynAddressLearnNum,
hwMacSecureAddressLearnNum,
hwMacLimitRuleMaxMac,
hwMacLimitRuleMaxRate,
hwMacLimitRuleAction,
hwMacLimitRuleAlarm,
hwMacLimitRuleRowstatus,
hwMacLimitApplyRuleName,
hwMacLimitApplyRowstatus,
hwPwMacLimitMaxMac,
hwPwMacLimitMaxRate,
hwPwMacLimitAction,
hwPwMacLimitAlarm,
hwPwMacLimitRowstatus,
hwPwMacAddressLearn,
hwPwMacDynAddressLearnNum,
hwSlotMacLimitId,
hwSlotMacLimitMaxMac,
hwSlotMacLimitMaxRate,
hwSlotMacLimitAction,
hwSlotMacLimitAlarm,
hwSlotMacLimitRowstatus,
hwBridgeMacAgingTime
}
STATUS current
DESCRIPTION
"A collection of objects providing information about mac-address
limit rules."
::= { hwL2MAMGroups 3 }
hwL2MAMMacUsageGroup OBJECT-GROUP
OBJECTS {
hwMacEntityUsage,
hwMacEntityUsageThreshold
}
STATUS current
DESCRIPTION
"A collection of objects providing information about mac-address
usage."
::= { hwL2MAMGroups 4 }
hwdbCfg3tupleFdbGroup OBJECT-GROUP
OBJECTS {
hwdbCfg3tupleFdbOutPort,
hwdbCfg3tupleFdbRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
level 2 configured 3-tuple mac-address table."
::= { hwL2MAMGroups 5 }
hwL2MAMObjectsGroup OBJECT-GROUP
OBJECTS {
hwMacAgingTime,
hwMacRestrict,
hwMacGlobalStatistics,
hwDiscardIllegalMacEnable,
hwDiscardIllegalMacAlarm,
hwMacSpoofingDefend,
hwMacflappingMac,
hwMacFlappingVlan
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
mac-address configuration."
::= { hwL2MAMGroups 6 }
hwPortSecurityGroup OBJECT-GROUP
OBJECTS {
hwPortSecurityEnabled,
hwPortSecurityProtectAction,
hwPortSecurityAllDynToStaticEnable,
hwPortSecurityAllDynToStickyEnable,
hwPortSecurityMaxMacNum
}
STATUS current
DESCRIPTION
"A table containing the port security information for device.
It can protect the port from unaccessible mac."
::= { hwL2MAMGroups 7 }
hwMacIfStatisticsGroup OBJECT-GROUP
OBJECTS {
hwMacIfStatisticsIfIndex,
hwMacIfStatistics
}
STATUS current
DESCRIPTION
"A collection of objects providing information about mac-address statistics by interface index."
::= { hwL2MAMGroups 8 }
hwMacSlotStatisticsGroup OBJECT-GROUP
OBJECTS {
hwMacSlotStatisticsSlotId,
hwMacSlotStatistics,
hwMacSlotStatisticsSpecify
}
STATUS current
DESCRIPTION
"A collection of objects providing information about mac-address statistics by slot ID."
::= { hwL2MAMGroups 9 }
hwMacVlanStatisticsGroup OBJECT-GROUP
OBJECTS {
hwMacVlanStatisticsVlanId,
hwMacVlanStatistics
}
STATUS current
DESCRIPTION
"A collection of objects providing information about mac-address statistics by VLAN ID."
::= { hwL2MAMGroups 10 }
hwMacVsiStatisticsGroup OBJECT-GROUP
OBJECTS {
hwMacVsiStatisticsVsiName,
hwMacVsiStatistics
}
STATUS current
DESCRIPTION
"A collection of objects providing information about mac-address statistics by VSI name."
::= { hwL2MAMGroups 11 }
hwMacSpoofingDefendGroup OBJECT-GROUP
OBJECTS {
hwMacSpoofingDefendEnabled
}
STATUS current
DESCRIPTION
"A collection of objects providing information about MAC spoofing defend."
::= { hwL2MAMGroups 12 }
hwL2ProtocolTunnelTrapGroup OBJECT-GROUP
OBJECTS {
hwL2ProtocolTunnelTrapPortName,
hwL2ProtocolTunnelTrapProtocolName,
hwL2ProtocolTunnelTrapDropThreshold
}
STATUS current
DESCRIPTION
"A collection of items of objects information of L2 Protocol Tunnel Trap notify."
::= { hwL2MAMGroups 13 }
hwL2ProtclTnlStdProtclGroup OBJECT-GROUP
OBJECTS {
hwL2ProtclTnlStdProtclMacAddr,
hwL2ProtclTnlStdEncapType,
hwL2ProtclTnlStdProtclType,
hwL2ProtclTnlStdGroupMacAddr,
hwL2ProtclTnlStdGroupDefault,
hwL2ProtclTnlStdPriority
}
STATUS current
DESCRIPTION
"A collection of items of configuration table of standard L2 protocol tunnel."
::= { hwL2MAMGroups 14 }
hwL2ProtclTnlCusProtclGroup OBJECT-GROUP
OBJECTS {
hwL2ProtclTnlCusProtclMacAddr,
hwL2ProtclTnlCusEncapType,
hwL2ProtclTnlCusProtclType,
hwL2ProtclTnlCusGroupMacAddr,
hwL2ProtclTnlCusGroupDefault,
hwL2ProtclTnlCusPriority,
hwL2ProtclTnlCusRowStatus
}
STATUS current
DESCRIPTION
"A collection of items of configuration table of customize L2 protocol tunnel."
::= { hwL2MAMGroups 15 }
hwL2ProtclTnlEnableGroup OBJECT-GROUP
OBJECTS {
hwL2ProtclTnlEnableTransMode,
hwL2ProtclTnlEnableTagListLow,
hwL2ProtclTnlEnableTagListHigh,
hwL2ProtclTnlEnableDropthresholdRate,
hwL2ProtclTnlEnableRowStatus
}
STATUS current
DESCRIPTION
"A collection of items of port configuration of L2 protocol tunnel."
::= { hwL2MAMGroups 16 }
hwL2ProtclTnlStatisticsGroup OBJECT-GROUP
OBJECTS {
hwL2ProtclTnlStatisticsDropthrhldRate,
hwL2ProtclTnlStatisticsInputPkts,
hwL2ProtclTnlStatisticsOutputPkts,
hwL2ProtclTnlStatisticsDropPkts
}
STATUS current
DESCRIPTION
"A collection of items of port statistics of L2 protocol tunnel."
::= { hwL2MAMGroups 17 }
-- MAC better maintenance
hwCfgMacAddrQueryTableGroup OBJECT-GROUP
OBJECTS {
hwCfgMacAddrQueryType,
hwCfgMacAddrQueryIfIndex,
hwCfgMacAddrQueryPeVlanId,
hwCfgMacAddrQueryCeVlanId,
hwCfgMacAddrQueryCedefaultFlag,
hwCfgMacAddrQueryAtmIfIndex,
hwCfgMacAddrQueryVpi,
hwCfgMacAddrQueryVci,
hwCfgMacAddrQueryMacTunnel
}
STATUS current
DESCRIPTION
"A collection of items of layer 2 Configured mac-address query table."
::= { hwL2MAMGroups 18 }
hwDynMacAddrQueryTableGroup OBJECT-GROUP
OBJECTS {
hwDynMacAddrQueryType,
hwDynMacAddrQueryIfIndex,
hwDynMacAddrQueryPeVlanId,
hwDynMacAddrQueryCeVlanId,
hwDynMacAddrQueryAtmIfIndex,
hwDynMacAddrQueryVpi,
hwDynMacAddrQueryVci,
hwDynMacAddrQueryPeerIp,
hwDynMacAddrQueryPwId,
hwDynMacAddrQueryMacTunnel,
hwDynMacAddrQueryAgingTime
}
STATUS current
DESCRIPTION
"A collection of items of layer 2 dynamic mac-address query table."
::= { hwL2MAMGroups 19 }
hwMacInfoQueryTableGroup OBJECT-GROUP
OBJECTS {
hwMacInfoQueryTotalNumber,
hwMacInfoQueryTotalLocalNumber,
hwMacInfoQueryTotalRemoteNumber,
hwMacInfoQueryCapacity
}
STATUS current
DESCRIPTION
"A collection of items of layer 2 mac-address database query."
::= { hwL2MAMGroups 20 }
-- -------------------------------------------------------------
-- compliance statements
-- -------------------------------------------------------------
hwL2MAMCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for device support of Level 2
Mac-address management."
MODULE
MANDATORY-GROUPS {
hwL2MAMCfgFdbGroup,
hwL2MAMDynFdbGroup,
hwL2MAMMacLimitGroup,
hwL2MAMMacUsageGroup,
hwdbCfg3tupleFdbGroup,
hwMacIfStatisticsGroup,
hwMacSlotStatisticsGroup,
hwMacVlanStatisticsGroup,
hwMacVsiStatisticsGroup
}
::= { hwL2MAMCompliances 1 }
hwL2MACTrapGroups OBJECT IDENTIFIER ::= { hwL2MAMConformance 3 }
hwBaseTrapGroup NOTIFICATION-GROUP
NOTIFICATIONS {hwMacUsageRaisingThreshold,
hwMacUsageFallingThreshold,
hwMacLimitNumRaisingThreshold,
hwMacLimitNumFallingThreshold,hwUntargetMacNumAlarm,
hwPwMacLimitNumRaisingThreshold,
hwPwMacLimitNumFallingThreshold,
hwPortStickyReachMaxAlarm,
hwRecIllegalMacPktAlarm,
hwMacLimitOverThresholdAlarm,
hwMacFlappingAlarm,
hwSlotMacLimitNumRaisingThreshold,
hwSlotMacLimitNumFallingThreshold,
hwL2ProtocolTunnelDropThresholdRaising,
hwL2ProtocolTunnelDropThresholdFalling,
hwVsiMacLimitNumRaisingThresholdAlarm,
hwVsiMacLimitNumRaisingThresholdAlarmClear,
hwMacLimitOverThresholdAlarmResume,
hwSlotMacNumRaisingThreshold,
hwSlotMacNumFallingThreshold
}
STATUS current
DESCRIPTION
"L2 MAC tap group."
::= { hwL2MACTrapGroups 2 }
END
View Git Blame Copy Permalink