non-dockerized installation playbook
add non-dockerized installation playbooks and roles Change-Id: Ica4918a3627ce20db6b4a9823bbbbbaff92b9101
This commit is contained in:
Jerry Zhao
parent
03d782f728
commit
191771e32c
|
|
@ -0,0 +1,7 @@
|
|||
---
|
||||
|
||||
- hosts: cobbler_ansible_test
|
||||
sudo: True
|
||||
roles:
|
||||
- common
|
||||
- cobbler
|
||||
|
|
@ -0,0 +1,8 @@
|
|||
---
|
||||
|
||||
- hosts: compass_cobbler
|
||||
sudo: True
|
||||
roles:
|
||||
- common
|
||||
- cobbler
|
||||
- compass
|
||||
|
|
@ -5,8 +5,12 @@ rebuild: True
|
|||
|
||||
# Auto-generated IP values
|
||||
chef_server: "10.145.89.139"
|
||||
cobbler_server: "10.1.0.11"
|
||||
compass-server: "10.1.0.11"
|
||||
cobbler_server: "{{ internal_ip }}"
|
||||
compass-server: "{{ internal_ip }}"
|
||||
|
||||
internal_nic: eth0
|
||||
internal_interface: "ansible_{{ internal_nic }}"
|
||||
internal_ip: "{{ hostvars[inventory_hostname][internal_interface]['ipv4']['address'] }}"
|
||||
|
||||
# Auto-generated
|
||||
dockerized_cobbler: True
|
||||
|
|
@ -42,8 +46,17 @@ compass0_router: "192.168.100.1"
|
|||
# dhcp range for docker bridge: compass0
|
||||
compass0_dhcp_range: "192.168.100.150 192.168.100.160"
|
||||
|
||||
# management nic
|
||||
mgmt_nic: "eth0"
|
||||
|
||||
# management pxe server
|
||||
mgmt_next_ip: "10.1.0.11"
|
||||
|
||||
# management subnet ip of the cluster you want to deploy
|
||||
mgmt_subnet_ip: "10.1.0.11"
|
||||
mgmt_subnet_ip: "10.1.0.0"
|
||||
|
||||
# mangement cidr of the cluster you want to deploy
|
||||
mgmt_subnet: "10.1.0.0/24"
|
||||
|
||||
# management subnet router ip
|
||||
mgmt_router: "10.1.0.1"
|
||||
|
|
@ -170,6 +183,9 @@ compass_volume_mapping: "-v {{ compass_host_log_dir }}:{{ compass_container_log_
|
|||
docker_apt_key_server: hkp://keyserver.ubuntu.com:80
|
||||
docker_apt_key: 36A1D7869245C8950F966E92D8576A8BA88D21E9
|
||||
|
||||
# epel version
|
||||
epel_file_name: epel-release-6-8.noarch.rpm
|
||||
epel_base_url: http://download.fedoraproject.org/pub/epel/6/x86_64/
|
||||
# pxe boot macs
|
||||
#pxe_boot_macs: ['00:00:37:ed:95:4e', '00:00:79:ad:ce:6b', '00:00:0a:f6:6e:d7']
|
||||
#test: true
|
||||
|
|
|
|||
|
|
@ -0,0 +1,10 @@
|
|||
# This configuration file enables the cobbler web
|
||||
# interface (django version)
|
||||
|
||||
# Force everything to go to https
|
||||
RewriteEngine on
|
||||
RewriteCond %{HTTPS} off
|
||||
RewriteCond %{REQUEST_URI} ^/cobbler_web
|
||||
# RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI}
|
||||
|
||||
WSGIScriptAlias /cobbler_web /usr/share/cobbler/web/cobbler.wsgi
|
||||
|
|
@ -0,0 +1,79 @@
|
|||
# Default config for debmirror
|
||||
|
||||
# The config file is a perl script so take care to follow perl syntax.
|
||||
# Any setting in /etc/debmirror.conf overrides these defaults and
|
||||
# ~/.debmirror.conf overrides those again. Take only what you need.
|
||||
#
|
||||
# The syntax is the same as on the command line and variable names
|
||||
# loosely match option names. If you don't recognize something here
|
||||
# then just stick to the command line.
|
||||
#
|
||||
# Options specified on the command line override settings in the config
|
||||
# files.
|
||||
|
||||
# Location of the local mirror (use with care)
|
||||
# $mirrordir="/path/to/mirrordir"
|
||||
|
||||
# Output options
|
||||
$verbose=0;
|
||||
$progress=0;
|
||||
$debug=0;
|
||||
|
||||
# Download options
|
||||
$host="ftp.debian.org";
|
||||
$user="anonymous";
|
||||
$passwd="anonymous@";
|
||||
$remoteroot="debian";
|
||||
$download_method="ftp";
|
||||
# @dists="sid";
|
||||
@sections="main,main/debian-installer,contrib,non-free";
|
||||
# @arches="i386";
|
||||
# @ignores="";
|
||||
# @excludes="";
|
||||
# @includes="";
|
||||
# @excludes_deb_section="";
|
||||
# @limit_priority="";
|
||||
$omit_suite_symlinks=0;
|
||||
$skippackages=0;
|
||||
# @rsync_extra="doc,tools";
|
||||
$i18n=0;
|
||||
$getcontents=0;
|
||||
$do_source=1;
|
||||
$max_batch=0;
|
||||
|
||||
# @di_dists="dists";
|
||||
# @di_archs="arches";
|
||||
|
||||
# Save mirror state between runs; value sets validity of cache in days
|
||||
$state_cache_days=0;
|
||||
|
||||
# Security/Sanity options
|
||||
$ignore_release_gpg=0;
|
||||
$ignore_release=0;
|
||||
$check_md5sums=0;
|
||||
$ignore_small_errors=0;
|
||||
|
||||
# Cleanup
|
||||
$cleanup=0;
|
||||
$post_cleanup=1;
|
||||
|
||||
# Locking options
|
||||
$timeout=300;
|
||||
|
||||
# Rsync options
|
||||
$rsync_batch=200;
|
||||
$rsync_options="-aIL --partial";
|
||||
|
||||
# FTP/HTTP options
|
||||
$passive=0;
|
||||
# $proxy="http://proxy:port/";
|
||||
|
||||
# Dry run
|
||||
$dry_run=0;
|
||||
|
||||
# Don't keep diff files but use them
|
||||
$diff_mode="use";
|
||||
|
||||
# The config file must return true or perl complains.
|
||||
# Always copy this.
|
||||
1;
|
||||
|
|
@ -0,0 +1,8 @@
|
|||
Origin: ppa
|
||||
Label: ppa_repo
|
||||
Suite: stable
|
||||
Codename: ppa
|
||||
Version: 0.1
|
||||
Architectures: i386 amd64 source
|
||||
Components: main
|
||||
Description: ppa repo
|
||||
|
|
@ -0,0 +1,14 @@
|
|||
# default: off
|
||||
# description: The rsync server is a good addition to an ftp server, as it \
|
||||
# allows crc checksumming etc.
|
||||
service rsync
|
||||
{
|
||||
disable = no
|
||||
flags = IPv6
|
||||
socket_type = stream
|
||||
wait = no
|
||||
user = root
|
||||
server = /usr/bin/rsync
|
||||
server_args = --daemon
|
||||
log_on_failure += USERID
|
||||
}
|
||||
|
|
@ -0,0 +1,221 @@
|
|||
#
|
||||
# This is the Apache server configuration file providing SSL support.
|
||||
# It contains the configuration directives to instruct the server how to
|
||||
# serve pages over an https connection. For detailing information about these
|
||||
# directives see <URL:http://httpd.apache.org/docs/2.2/mod/mod_ssl.html>
|
||||
#
|
||||
# Do NOT simply read the instructions in here without understanding
|
||||
# what they do. They're here only as hints or reminders. If you are unsure
|
||||
# consult the online docs. You have been warned.
|
||||
#
|
||||
|
||||
LoadModule ssl_module modules/mod_ssl.so
|
||||
|
||||
#
|
||||
# When we also provide SSL we have to listen to the
|
||||
# the HTTPS port in addition.
|
||||
#
|
||||
Listen 443
|
||||
|
||||
##
|
||||
## SSL Global Context
|
||||
##
|
||||
## All SSL configuration in this context applies both to
|
||||
## the main server and all SSL-enabled virtual hosts.
|
||||
##
|
||||
|
||||
# Pass Phrase Dialog:
|
||||
# Configure the pass phrase gathering process.
|
||||
# The filtering dialog program (`builtin' is a internal
|
||||
# terminal dialog) has to provide the pass phrase on stdout.
|
||||
SSLPassPhraseDialog builtin
|
||||
|
||||
# Inter-Process Session Cache:
|
||||
# Configure the SSL Session Cache: First the mechanism
|
||||
# to use and second the expiring timeout (in seconds).
|
||||
SSLSessionCache shmcb:/var/cache/mod_ssl/scache(512000)
|
||||
SSLSessionCacheTimeout 300
|
||||
|
||||
# Semaphore:
|
||||
# Configure the path to the mutual exclusion semaphore the
|
||||
# SSL engine uses internally for inter-process synchronization.
|
||||
# SSLMutex default
|
||||
|
||||
# Pseudo Random Number Generator (PRNG):
|
||||
# Configure one or more sources to seed the PRNG of the
|
||||
# SSL library. The seed data should be of good random quality.
|
||||
# WARNING! On some platforms /dev/random blocks if not enough entropy
|
||||
# is available. This means you then cannot use the /dev/random device
|
||||
# because it would lead to very long connection times (as long as
|
||||
# it requires to make more entropy available). But usually those
|
||||
# platforms additionally provide a /dev/urandom device which doesn't
|
||||
# block. So, if available, use this one instead. Read the mod_ssl User
|
||||
# Manual for more details.
|
||||
SSLRandomSeed startup file:/dev/urandom 256
|
||||
SSLRandomSeed connect builtin
|
||||
#SSLRandomSeed startup file:/dev/random 512
|
||||
#SSLRandomSeed connect file:/dev/random 512
|
||||
#SSLRandomSeed connect file:/dev/urandom 512
|
||||
|
||||
#
|
||||
# Use "SSLCryptoDevice" to enable any supported hardware
|
||||
# accelerators. Use "openssl engine -v" to list supported
|
||||
# engine names. NOTE: If you enable an accelerator and the
|
||||
# server does not start, consult the error logs and ensure
|
||||
# your accelerator is functioning properly.
|
||||
#
|
||||
SSLCryptoDevice builtin
|
||||
#SSLCryptoDevice ubsec
|
||||
|
||||
##
|
||||
## SSL Virtual Host Context
|
||||
##
|
||||
|
||||
<VirtualHost _default_:443>
|
||||
|
||||
# General setup for the virtual host, inherited from global configuration
|
||||
#DocumentRoot "/var/www/html"
|
||||
#ServerName www.example.com:443
|
||||
|
||||
# Use separate log files for the SSL virtual host; note that LogLevel
|
||||
# is not inherited from httpd.conf.
|
||||
ErrorLog logs/ssl_error_log
|
||||
TransferLog logs/ssl_access_log
|
||||
LogLevel warn
|
||||
|
||||
# SSL Engine Switch:
|
||||
# Enable/Disable SSL for this virtual host.
|
||||
SSLEngine on
|
||||
|
||||
# SSL Protocol support:
|
||||
# List the enable protocol levels with which clients will be able to
|
||||
# connect. Disable SSLv2 access by default:
|
||||
SSLProtocol all -SSLv2
|
||||
|
||||
# SSL Cipher Suite:
|
||||
# List the ciphers that the client is permitted to negotiate.
|
||||
# See the mod_ssl documentation for a complete list.
|
||||
SSLCipherSuite ALL:!ADH:!EXPORT:!SSLv2:RC4+RSA:+HIGH:+MEDIUM:+LOW
|
||||
|
||||
# Server Certificate:
|
||||
# Point SSLCertificateFile at a PEM encoded certificate. If
|
||||
# the certificate is encrypted, then you will be prompted for a
|
||||
# pass phrase. Note that a kill -HUP will prompt again. A new
|
||||
# certificate can be generated using the genkey(1) command.
|
||||
SSLCertificateFile /etc/pki/tls/certs/localhost.crt
|
||||
|
||||
# Server Private Key:
|
||||
# If the key is not combined with the certificate, use this
|
||||
# directive to point at the key file. Keep in mind that if
|
||||
# you've both a RSA and a DSA private key you can configure
|
||||
# both in parallel (to also allow the use of DSA ciphers, etc.)
|
||||
SSLCertificateKeyFile /etc/pki/tls/private/localhost.key
|
||||
|
||||
# Server Certificate Chain:
|
||||
# Point SSLCertificateChainFile at a file containing the
|
||||
# concatenation of PEM encoded CA certificates which form the
|
||||
# certificate chain for the server certificate. Alternatively
|
||||
# the referenced file can be the same as SSLCertificateFile
|
||||
# when the CA certificates are directly appended to the server
|
||||
# certificate for convinience.
|
||||
#SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt
|
||||
|
||||
# Certificate Authority (CA):
|
||||
# Set the CA certificate verification path where to find CA
|
||||
# certificates for client authentication or alternatively one
|
||||
# huge file containing all of them (file must be PEM encoded)
|
||||
#SSLCACertificateFile /etc/pki/tls/certs/ca-bundle.crt
|
||||
|
||||
# Client Authentication (Type):
|
||||
# Client certificate verification type and depth. Types are
|
||||
# none, optional, require and optional_no_ca. Depth is a
|
||||
# number which specifies how deeply to verify the certificate
|
||||
# issuer chain before deciding the certificate is not valid.
|
||||
#SSLVerifyClient require
|
||||
#SSLVerifyDepth 10
|
||||
|
||||
# Access Control:
|
||||
# With SSLRequire you can do per-directory access control based
|
||||
# on arbitrary complex boolean expressions containing server
|
||||
# variable checks and other lookup directives. The syntax is a
|
||||
# mixture between C and Perl. See the mod_ssl documentation
|
||||
# for more details.
|
||||
#<Location />
|
||||
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
|
||||
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
|
||||
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
|
||||
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
|
||||
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
|
||||
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
|
||||
#</Location>
|
||||
|
||||
# SSL Engine Options:
|
||||
# Set various options for the SSL engine.
|
||||
# o FakeBasicAuth:
|
||||
# Translate the client X.509 into a Basic Authorisation. This means that
|
||||
# the standard Auth/DBMAuth methods can be used for access control. The
|
||||
# user name is the `one line' version of the client's X.509 certificate.
|
||||
# Note that no password is obtained from the user. Every entry in the user
|
||||
# file needs this password: `xxj31ZMTZzkVA'.
|
||||
# o ExportCertData:
|
||||
# This exports two additional environment variables: SSL_CLIENT_CERT and
|
||||
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
|
||||
# server (always existing) and the client (only existing when client
|
||||
# authentication is used). This can be used to import the certificates
|
||||
# into CGI scripts.
|
||||
# o StdEnvVars:
|
||||
# This exports the standard SSL/TLS related `SSL_*' environment variables.
|
||||
# Per default this exportation is switched off for performance reasons,
|
||||
# because the extraction step is an expensive operation and is usually
|
||||
# useless for serving static content. So one usually enables the
|
||||
# exportation for CGI and SSI requests only.
|
||||
# o StrictRequire:
|
||||
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
|
||||
# under a "Satisfy any" situation, i.e. when it applies access is denied
|
||||
# and no other module can change it.
|
||||
# o OptRenegotiate:
|
||||
# This enables optimized SSL connection renegotiation handling when SSL
|
||||
# directives are used in per-directory context.
|
||||
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
|
||||
<Files ~ "\.(cgi|shtml|phtml|php3?)$">
|
||||
SSLOptions +StdEnvVars
|
||||
</Files>
|
||||
<Directory "/var/www/cgi-bin">
|
||||
SSLOptions +StdEnvVars
|
||||
</Directory>
|
||||
|
||||
# SSL Protocol Adjustments:
|
||||
# The safe and default but still SSL/TLS standard compliant shutdown
|
||||
# approach is that mod_ssl sends the close notify alert but doesn't wait for
|
||||
# the close notify alert from client. When you need a different shutdown
|
||||
# approach you can use one of the following variables:
|
||||
# o ssl-unclean-shutdown:
|
||||
# This forces an unclean shutdown when the connection is closed, i.e. no
|
||||
# SSL close notify alert is send or allowed to received. This violates
|
||||
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
|
||||
# this when you receive I/O errors because of the standard approach where
|
||||
# mod_ssl sends the close notify alert.
|
||||
# o ssl-accurate-shutdown:
|
||||
# This forces an accurate shutdown when the connection is closed, i.e. a
|
||||
# SSL close notify alert is send and mod_ssl waits for the close notify
|
||||
# alert of the client. This is 100% SSL/TLS standard compliant, but in
|
||||
# practice often causes hanging connections with brain-dead browsers. Use
|
||||
# this only for browsers where you know that their SSL implementation
|
||||
# works correctly.
|
||||
# Notice: Most problems of broken clients are also related to the HTTP
|
||||
# keep-alive facility, so you usually additionally want to disable
|
||||
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
|
||||
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
|
||||
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
|
||||
# "force-response-1.0" for this.
|
||||
SetEnvIf User-Agent ".*MSIE.*" \
|
||||
nokeepalive ssl-unclean-shutdown \
|
||||
downgrade-1.0 force-response-1.0
|
||||
|
||||
# Per-Server Logging:
|
||||
# The home of a custom SSL log file. Use this when you want a
|
||||
# compact non-error SSL logfile on a virtual host basis.
|
||||
CustomLog logs/ssl_request_log \
|
||||
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
|
||||
|
||||
</VirtualHost>
|
||||
|
|
@ -1,3 +1,12 @@
|
|||
---
|
||||
- name: restart dhcp-relay
|
||||
shell: service isc-dhcp-relay restart
|
||||
|
||||
- name: restart httpd
|
||||
service: name=httpd state=restarted enabled=yes
|
||||
|
||||
- name: restart cobbler
|
||||
service: name=cobblerd state=restarted enabled=yes
|
||||
|
||||
- name: cobbler sync
|
||||
command: cobbler sync
|
||||
|
|
|
|||
|
|
@ -0,0 +1,274 @@
|
|||
---
|
||||
|
||||
- name: install base packages
|
||||
yum: name={{ item }} state=present
|
||||
with_items:
|
||||
- wget
|
||||
- git
|
||||
|
||||
- name: check epel presence
|
||||
command: rpm -q epel-release
|
||||
register: epel_presence
|
||||
ignore_errors: yes
|
||||
|
||||
#- name: get epel version
|
||||
# command: >
|
||||
# wget -q {{ epel_base_url }} -O - | grep -oE "(href=\"epel-release-6-[0-9,.].*)" | cut -d\" -f2
|
||||
# register: epel_file_name
|
||||
# when: epel_presence.rc != 0
|
||||
|
||||
- name: install epel
|
||||
yum: name={{ epel_base_url }}/{{ epel_file_name }} state=present
|
||||
when: epel_presence.rc != 0
|
||||
|
||||
- name: yum update
|
||||
yum: name=* state=latest update_cache=yes
|
||||
|
||||
- name: install related packages
|
||||
yum: name={{ item }} state=present
|
||||
with_items:
|
||||
- cobbler
|
||||
- cobbler-web
|
||||
- createrepo
|
||||
- mkisofs
|
||||
- syslinux
|
||||
- debmirror
|
||||
- pykickstart
|
||||
- cman
|
||||
- bind
|
||||
- rsync
|
||||
- dhcp
|
||||
- xinetd
|
||||
- tftp-server
|
||||
- gcc
|
||||
- httpd
|
||||
|
||||
- name: turn off iptables
|
||||
service: name=iptables state=stopped enabled=no
|
||||
|
||||
- name: replace config files
|
||||
copy: src={{ item.name }} dest={{ item.dest }}
|
||||
with_items:
|
||||
- { name: rsync, dest: /etc/xinetd.d/rsync }
|
||||
- { name: debmirror.conf, dest: /etc/debmirror.conf }
|
||||
|
||||
- name: configure interface for dhcp
|
||||
command: ifconfig {{ mgmt_nic }}:1 {{ mgmt_next_ip }} netmask {{ mgmt_subnet_mask }}
|
||||
|
||||
- name: copy httpd configuration files
|
||||
file: src={{ item }} dest=/etc/httpd/conf.d/{{ item }} mode=0644
|
||||
with_items:
|
||||
- cobbler_web.conf
|
||||
- ssl.conf
|
||||
notify:
|
||||
restart httpd
|
||||
|
||||
- name: disable selinux
|
||||
selinux: state=disabled
|
||||
|
||||
- name: disable selinux real time
|
||||
shell: echo 0 > /selinux/enforce
|
||||
|
||||
- name: copy cobbler configuration files
|
||||
template: src={{ item.name }} dest=/etc/cobbler/{{ item.file_name }} mode=0644
|
||||
with_items:
|
||||
- { name: tftpd.template, file_name: tftpd.template }
|
||||
- { name: modules.conf, file_name: modules.conf }
|
||||
- { name: dhcp.template.nodocker.j2, file_name: dhcp.template }
|
||||
- { name: named.template.nodocker.j2, file_name: named.template }
|
||||
- { name: settings.j2, file_name: settings }
|
||||
notify:
|
||||
- restart cobbler
|
||||
- cobbler sync
|
||||
|
||||
- meta: flush_handlers
|
||||
|
||||
- name: clone snippets
|
||||
git: repo={{ compass_adapter_source }}
|
||||
dest=/opt/compass-adapters
|
||||
version={{ compass_adapter_version }}
|
||||
force=yes
|
||||
|
||||
- name: copy snippets to cobbler folder
|
||||
command: cp -r /opt/compass-adapters/cobbler/{{ item }} /var/lib/cobbler/{{ item }}
|
||||
with_items:
|
||||
- snippets
|
||||
- scripts
|
||||
- triggers
|
||||
|
||||
- name: change snippets mode
|
||||
file: path=/var/lib/cobbler mode=0755 recurse=yes
|
||||
|
||||
- name: copy default kickstart files
|
||||
command: cp -r /opt/compass-adapters/cobbler/kickstarts/{{ item }} /var/lib/cobbler/kickstarts/{{ item }}
|
||||
with_items:
|
||||
- default.ks
|
||||
- default.seed
|
||||
|
||||
- name: change kickstart mode
|
||||
file: path=/var/lib/cobbler/kickstarts mode=0666 recurse=yes
|
||||
|
||||
- name: disable selinux
|
||||
selinux: state=disabled
|
||||
|
||||
- name: disable selinux real time
|
||||
command: echo 0 > /selinux/enforce
|
||||
|
||||
- name: create cobbler log directories
|
||||
file: path={{ item }} mode=0644 state=directory recurse=yes
|
||||
with_items:
|
||||
# - /var/log/cobbler
|
||||
- /var/log/cobbler/anamon
|
||||
- /var/log/cobbler/tasks
|
||||
|
||||
- name: create cobbler ppa repo dir
|
||||
file: path=/var/lib/cobbler/{{ item }}
|
||||
state=directory
|
||||
mode=0644
|
||||
recurse=yes
|
||||
with_items:
|
||||
- repo_mirror/centos_6_5_ppa_repo
|
||||
- repo_mirror/ubuntu_12_04_ppa_repo/conf
|
||||
- repo_mirror/ubuntu_14_04_ppa_repo/conf
|
||||
|
||||
#- name: download centos ppa repo rpms
|
||||
# get_url: url={{ item }}
|
||||
# dest=/var/lib/cobbler/repo_mirror/centos_6_5_ppa_repo/
|
||||
# with_items:
|
||||
# - "{{ ntp }}"
|
||||
# - "{{ ssh_client }}"
|
||||
# - "{{ openssh }}"
|
||||
# - "{{ iproute }}"
|
||||
# - "{{ wget }}"
|
||||
# - "{{ ntpdate }}"
|
||||
# - "{{ yum_priorities }}"
|
||||
# - "{{ jsonc }}"
|
||||
# - "{{ libestr }}"
|
||||
# - "{{ libgt }}"
|
||||
# - "{{ liblogging }}"
|
||||
# - "{{ rsyslog }}"
|
||||
|
||||
- name: copy distributions to ubuntu ppa repo
|
||||
template: src=distributions
|
||||
dest=/var/lib/cobbler/repo_mirror/ubuntu_12_04_ppa_repo/conf/distributions
|
||||
mode=0644
|
||||
|
||||
- name: copy distribution to ubuntu 14.04 ppa repo
|
||||
template: src=distributions
|
||||
dest=/var/lib/cobbler/repo_mirror/ubuntu_14_04_ppa_repo/conf/distributions
|
||||
mode=0644
|
||||
|
||||
- name: start cobbler and httpd services
|
||||
service: name={{ item }} state=restarted enabled=yes
|
||||
with_items:
|
||||
- httpd
|
||||
- cobblerd
|
||||
|
||||
- name: download ppa repo images
|
||||
get_url: url={{ item.name }} dest=/var/lib/cobbler/repo_mirror/{{ item.filename }}.tar.gz
|
||||
with_items:
|
||||
- { name: "{{ centos_6_5_ppa_repo_url }}", filename: "centos_6_5_ppa_repo" }
|
||||
- { name: "{{ ubuntu_12_04_ppa_repo_url }}", filename: "ubuntu_12_04_ppa_repo" }
|
||||
- { name: "{{ ubuntu_14_04_ppa_repo_url }}", filename: "ubuntu_14_04_ppa_repo" }
|
||||
|
||||
- name: untar ppa repo images
|
||||
unarchive: src=/var/lib/cobbler/repo_mirror/{{ item }}.tar.gz
|
||||
dest=/var/lib/cobbler/repo_mirror/
|
||||
copy=no
|
||||
with_items:
|
||||
- centos_6_5_ppa_repo
|
||||
- ubuntu_12_04_ppa_repo
|
||||
- ubuntu_14_04_ppa_repo
|
||||
|
||||
- name: add repos
|
||||
command: cobbler repo add --name {{ item }} --mirror=/var/lib/cobbler/repo_mirror/{{ item }} --mirror-locally=Y --arch=x86_64
|
||||
with_items:
|
||||
- centos_6_5_ppa_repo
|
||||
- ubuntu_12_04_ppa_repo
|
||||
- ubuntu_14_04_ppa_repo
|
||||
args:
|
||||
creates: /opt/repo_added.txt
|
||||
ignore_errors: yes
|
||||
|
||||
- name: cobbler repo sync
|
||||
command: cobbler reposync
|
||||
|
||||
- name: cobbler get loaders
|
||||
command: cobbler get-loaders
|
||||
|
||||
- name: create directory for images
|
||||
file: path=/var/lib/cobbler/iso state=directory
|
||||
|
||||
- name: download images
|
||||
get_url: url={{ item.name }} dest=/var/lib/cobbler/iso/{{ item.filename }} mode=0644
|
||||
with_items:
|
||||
- { name: "{{ centos_url }}", filename: "{{ centos }}.iso" }
|
||||
- { name: "{{ ubuntu_url }}", filename: "{{ ubuntu }}.iso" }
|
||||
- { name: "{{ ubuntu_1404_url }}", filename: "{{ ubuntu_1404 }}.iso" }
|
||||
|
||||
- name: mount_info
|
||||
command: mount
|
||||
register: mount_info
|
||||
|
||||
- name: create mount point
|
||||
file: name=/mnt/{{ item }} state=directory
|
||||
with_items:
|
||||
- "{{ centos }}"
|
||||
- "{{ ubuntu }}"
|
||||
- "{{ ubuntu_1404 }}"
|
||||
when: mount_info.stdout.find('CentOS') == -1
|
||||
|
||||
- name: mount images
|
||||
shell: mount -o loop /var/lib/cobbler/iso/{{ item }}.iso /mnt/{{ item }}
|
||||
with_items:
|
||||
- "{{ centos }}"
|
||||
- "{{ ubuntu }}"
|
||||
- "{{ ubuntu_1404 }}"
|
||||
when: mount_info.stdout.find('CentOS') == -1
|
||||
args:
|
||||
creates: /opt/image_mounted.txt
|
||||
|
||||
- name: import distros
|
||||
command: cobbler import --path=/mnt/{{ item.name }} --name {{ item.name }} --arch=x86_64 --kickstart=/var/lib/cobbler/kickstarts/default.ks --breed={{ item.breed }}
|
||||
with_items:
|
||||
- { name: "{{ centos }}", breed: redhat }
|
||||
- { name: "{{ ubuntu }}", breed: ubuntu }
|
||||
- { name: "{{ ubuntu_1404 }}", breed: ubuntu }
|
||||
args:
|
||||
creates: /opt/distro_imported.txt
|
||||
ignore_errors: yes
|
||||
run_once: True
|
||||
|
||||
- name: add profiles
|
||||
command: cobbler profile add --name={{ item.name }} --repo={{ item.repo }} --distro={{ item.name }} --ksmeta="tree=http://{{ mgmt_next_ip }}/cobbler/ks_mirror/{{ item.name }}" --kickstart=/var/lib/cobbler/kickstarts/{{ item.kickstart }} --kopts="{{ item.kopts }}"
|
||||
with_items:
|
||||
- { name: "{{ centos }}", repo: centos_6_5_ppa_repo, kickstart: default.ks, kopts: "" }
|
||||
- { name: "{{ ubuntu }}", repo: ubuntu_12_04_ppa_repo, kickstart: default.seed, kopts: "netcfg/choose_interface=auto" }
|
||||
- { name: "{{ ubuntu_1404 }}", repo: ubuntu_14_04_ppa_repo, kickstart: default.seed, kopts: "netcfg/choose_interface=auto"}
|
||||
args:
|
||||
creates: /opt/profile_added.txt
|
||||
ignore_errors: yes
|
||||
run_once: True
|
||||
|
||||
- name: edit profiles
|
||||
command: cobbler profile edit --name={{ item.name }} --repo={{ item.repo }} --distro={{ item.name }} --ksmeta="tree=http://{{ mgmt_next_ip }}/cobbler/ks_mirror/{{ item.name }}" --kickstart=/var/lib/cobbler/kickstarts/{{ item.kickstart }} --kopts="{{ item.kopts }}"
|
||||
with_items:
|
||||
- { name: "{{ centos }}", repo: centos_6_5_ppa_repo, kickstart: default.ks, kopts: "" }
|
||||
- { name: "{{ ubuntu }}", repo: ubuntu_12_04_ppa_repo, kickstart: default.seed, kopts: "netcfg/choose_interface=auto" }
|
||||
- { name: "{{ ubuntu_1404 }}", repo: ubuntu_14_04_ppa_repo, kickstart: default.seed, kopts: "netcfg/choose_interface=auto"}
|
||||
|
||||
- name: remove ubuntu default repo
|
||||
command: cobbler repo remove --name {{ item }}
|
||||
with_items:
|
||||
- "{{ ubuntu }}"
|
||||
- "{{ ubuntu_1404 }}"
|
||||
ignore_errors: yes
|
||||
|
||||
- name: cobbler repo sync again
|
||||
command: cobbler reposync
|
||||
|
||||
- name: cobler sync
|
||||
command: cobbler sync
|
||||
|
||||
- name: cobbler check
|
||||
command: cobbler check
|
||||
|
|
@ -0,0 +1,121 @@
|
|||
# ******************************************************************
|
||||
# Cobbler managed dhcpd.conf file
|
||||
#
|
||||
# generated from cobbler dhcp.conf template ($date)
|
||||
# Do NOT make changes to /etc/dhcpd.conf. Instead, make your changes
|
||||
# in /etc/cobbler/dhcp.template, as /etc/dhcpd.conf will be
|
||||
# overwritten.
|
||||
#
|
||||
# ******************************************************************
|
||||
|
||||
ddns-update-style interim;
|
||||
|
||||
allow booting;
|
||||
allow bootp;
|
||||
deny unknown-clients;
|
||||
local-address {{ internal_ip }};
|
||||
log-facility local6;
|
||||
|
||||
ignore client-updates;
|
||||
set vendorclass = option vendor-class-identifier;
|
||||
|
||||
option pxe-system-type code 93 = unsigned integer 16;
|
||||
option space pxelinux;
|
||||
option pxelinux.magic code 208 = string;
|
||||
option pxelinux.configfile code 209 = text;
|
||||
option pxelinux.pathprefix code 210 = text;
|
||||
option pxelinux.reboottime code 211 = unsigned integer 32;
|
||||
|
||||
subnet {{ compass0_subnet_ip }} netmask {{ compass0_subnet_mask }} {
|
||||
option routers {{ compass0_router }};
|
||||
option domain-name-servers {{ compass0_router }};
|
||||
option subnet-mask {{ compass0_subnet_mask }};
|
||||
range dynamic-bootp {{ compass0_dhcp_range }};
|
||||
default-lease-time 21600;
|
||||
max-lease-time 43200;
|
||||
next-server $next_server;
|
||||
class "pxeclients" {
|
||||
match if substring (option vendor-class-identifier, 0, 9) = "PXEClient";
|
||||
if option pxe-system-type = 00:02 {
|
||||
filename "ia64/elilo.efi";
|
||||
} else if option pxe-system-type = 00:06 {
|
||||
filename "grub/grub-x86.efi";
|
||||
} else if option pxe-system-type = 00:07 {
|
||||
filename "grub/grub-x86_64.efi";
|
||||
} else {
|
||||
filename "pxelinux.0";
|
||||
}
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
subnet {{ mgmt_subnet_ip }} netmask {{ mgmt_subnet_mask }} {
|
||||
option routers {{ mgmt_router }};
|
||||
option domain-name-servers {{ mgmt_router }};
|
||||
option subnet-mask {{ mgmt_subnet_mask }};
|
||||
range dynamic-bootp {{ mgmt_dhcp_range }};
|
||||
default-lease-time 21600;
|
||||
max-lease-time 43200;
|
||||
next-server {{ mgmt_next_ip }};
|
||||
class "pxeclients" {
|
||||
match if substring (option vendor-class-identifier, 0, 9) = "PXEClient";
|
||||
if option pxe-system-type = 00:02 {
|
||||
filename "ia64/elilo.efi";
|
||||
} else if option pxe-system-type = 00:06 {
|
||||
filename "grub/grub-x86.efi";
|
||||
} else if option pxe-system-type = 00:07 {
|
||||
filename "grub/grub-x86_64.efi";
|
||||
} else {
|
||||
filename "pxelinux.0";
|
||||
}
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
#for dhcp_tag in $dhcp_tags.keys():
|
||||
## group could be subnet if your dhcp tags line up with your subnets
|
||||
## or really any valid dhcpd.conf construct ... if you only use the
|
||||
## default dhcp tag in cobbler, the group block can be deleted for a
|
||||
## flat configuration
|
||||
# group for Cobbler DHCP tag: $dhcp_tag
|
||||
group {
|
||||
#for mac in $dhcp_tags[$dhcp_tag].keys():
|
||||
#set iface = $dhcp_tags[$dhcp_tag][$mac]
|
||||
host $iface.name {
|
||||
hardware ethernet $mac;
|
||||
site-option-space "pxelinux";
|
||||
option pxelinux.magic f1:00:74:7e;
|
||||
if exists dhcp-parameter-request-list {
|
||||
# Always send the PXELINUX options (specified in hexadecimal)
|
||||
option dhcp-parameter-request-list = concat(option dhcp-parameter-request-list,d0,d1,d2,d3);
|
||||
}
|
||||
option pxelinux.reboottime 30;
|
||||
#if $iface.hostname:
|
||||
option host-name "$iface.hostname";
|
||||
#end if
|
||||
#if $iface.netmask:
|
||||
option subnet-mask $iface.netmask;
|
||||
#end if
|
||||
#if $iface.gateway:
|
||||
option routers $iface.gateway;
|
||||
#end if
|
||||
#if $iface.enable_gpxe:
|
||||
if exists user-class and option user-class = "gPXE" {
|
||||
filename "http://$cobbler_server/cblr/svc/op/gpxe/system/$iface.owner";
|
||||
} else if exists user-class and option user-class = "iPXE" {
|
||||
filename "http://$cobbler_server/cblr/svc/op/gpxe/system/$iface.owner";
|
||||
} else {
|
||||
filename "undionly.kpxe";
|
||||
}
|
||||
#else
|
||||
filename "$iface.filename";
|
||||
#end if
|
||||
## Cobbler defaults to $next_server, but some users
|
||||
## may like to use $iface.system.server for proxied setups
|
||||
next-server $next_server;
|
||||
## next-server $iface.next_server;
|
||||
}
|
||||
#end for
|
||||
}
|
||||
#end for
|
||||
|
||||
|
|
@ -0,0 +1,8 @@
|
|||
Origin: ppa
|
||||
Label: ppa_repo
|
||||
Suite: stable
|
||||
Codename: ppa
|
||||
Version: 0.1
|
||||
Architectures: i386 amd64 source
|
||||
Components: main
|
||||
Description: ppa repo
|
||||
|
|
@ -0,0 +1,83 @@
|
|||
# cobbler module configuration file
|
||||
# =================================
|
||||
|
||||
# authentication:
|
||||
# what users can log into the WebUI and Read-Write XMLRPC?
|
||||
# choices:
|
||||
# authn_denyall -- no one (default)
|
||||
# authn_configfile -- use /etc/cobbler/users.digest (for basic setups)
|
||||
# authn_passthru -- ask Apache to handle it (used for kerberos)
|
||||
# authn_ldap -- authenticate against LDAP
|
||||
# authn_spacewalk -- ask Spacewalk/Satellite (experimental)
|
||||
# authn_pam -- use PAM facilities
|
||||
# authn_testing -- username/password is always testing/testing (debug)
|
||||
# (user supplied) -- you may write your own module
|
||||
# WARNING: this is a security setting, do not choose an option blindly.
|
||||
# for more information:
|
||||
# https://github.com/cobbler/cobbler/wiki/Cobbler-web-interface
|
||||
# https://github.com/cobbler/cobbler/wiki/Security-overview
|
||||
# https://github.com/cobbler/cobbler/wiki/Kerberos
|
||||
# https://github.com/cobbler/cobbler/wiki/Ldap
|
||||
|
||||
[authentication]
|
||||
module = authn_configfile
|
||||
|
||||
# authorization:
|
||||
# once a user has been cleared by the WebUI/XMLRPC, what can they do?
|
||||
# choices:
|
||||
# authz_allowall -- full access for all authneticated users (default)
|
||||
# authz_ownership -- use users.conf, but add object ownership semantics
|
||||
# (user supplied) -- you may write your own module
|
||||
# WARNING: this is a security setting, do not choose an option blindly.
|
||||
# If you want to further restrict cobbler with ACLs for various groups,
|
||||
# pick authz_ownership. authz_allowall does not support ACLs. configfile
|
||||
# does but does not support object ownership which is useful as an additional
|
||||
# layer of control.
|
||||
|
||||
# for more information:
|
||||
# https://github.com/cobbler/cobbler/wiki/Cobbler-web-interface
|
||||
# https://github.com/cobbler/cobbler/wiki/Security-overview
|
||||
# https://github.com/cobbler/cobbler/wiki/Web-authorization
|
||||
|
||||
[authorization]
|
||||
module = authz_allowall
|
||||
|
||||
# dns:
|
||||
# chooses the DNS management engine if manage_dns is enabled
|
||||
# in /etc/cobbler/settings, which is off by default.
|
||||
# choices:
|
||||
# manage_bind -- default, uses BIND/named
|
||||
# manage_dnsmasq -- uses dnsmasq, also must select dnsmasq for dhcp below
|
||||
# NOTE: more configuration is still required in /etc/cobbler
|
||||
# for more information:
|
||||
# https://github.com/cobbler/cobbler/wiki/Dns-management
|
||||
|
||||
[dns]
|
||||
module = manage_bind
|
||||
|
||||
# dhcp:
|
||||
# chooses the DHCP management engine if manage_dhcp is enabled
|
||||
# in /etc/cobbler/settings, which is off by default.
|
||||
# choices:
|
||||
# manage_isc -- default, uses ISC dhcpd
|
||||
# manage_dnsmasq -- uses dnsmasq, also must select dnsmasq for dns above
|
||||
# NOTE: more configuration is still required in /etc/cobbler
|
||||
# for more information:
|
||||
# https://github.com/cobbler/cobbler/wiki/Dhcp-management
|
||||
|
||||
[dhcp]
|
||||
module = manage_isc
|
||||
|
||||
# tftpd:
|
||||
# chooses the TFTP management engine if manage_tftp is enabled
|
||||
# in /etc/cobbler/settings, which is ON by default.
|
||||
#
|
||||
# choices:
|
||||
# manage_in_tftpd -- default, uses the system's tftp server
|
||||
# manage_tftpd_py -- uses cobbler's tftp server
|
||||
#
|
||||
|
||||
[tftpd]
|
||||
module = manage_in_tftpd
|
||||
|
||||
#--------------------------------------------------
|
||||
|
|
@ -0,0 +1,31 @@
|
|||
options {
|
||||
listen-on port 53 { {{ cobbler_server }}; };
|
||||
directory "/var/named";
|
||||
dump-file "/var/named/data/cache_dump.db";
|
||||
statistics-file "/var/named/data/named_stats.txt";
|
||||
memstatistics-file "/var/named/data/named_mem_stats.txt";
|
||||
allow-query { 127.0.0.0/8; {{ mgmt_subnet }}; };
|
||||
recursion yes;
|
||||
};
|
||||
|
||||
logging {
|
||||
channel default_debug {
|
||||
file "data/named.run";
|
||||
severity dynamic;
|
||||
};
|
||||
};
|
||||
|
||||
#for $zone in $forward_zones
|
||||
zone "${zone}." {
|
||||
type master;
|
||||
file "$zone";
|
||||
};
|
||||
|
||||
#end for
|
||||
#for $zone, $arpa in $reverse_zones
|
||||
zone "${arpa}." {
|
||||
type master;
|
||||
file "$zone";
|
||||
};
|
||||
|
||||
#end for
|
||||
|
|
@ -0,0 +1,450 @@
|
|||
---
|
||||
# cobbler settings file
|
||||
# restart cobblerd and run "cobbler sync" after making changes
|
||||
# This config file is in YAML 1.0 format
|
||||
# see http://yaml.org
|
||||
# ==========================================================
|
||||
# if 1, cobbler will allow insertions of system records that duplicate
|
||||
# the --dns-name information of other system records. In general,
|
||||
# this is undesirable and should be left 0.
|
||||
allow_duplicate_hostnames: 0
|
||||
|
||||
# if 1, cobbler will allow insertions of system records that duplicate
|
||||
# the ip address information of other system records. In general,
|
||||
# this is undesirable and should be left 0.
|
||||
allow_duplicate_ips: 0
|
||||
|
||||
# if 1, cobbler will allow insertions of system records that duplicate
|
||||
# the mac address information of other system records. In general,
|
||||
# this is undesirable.
|
||||
allow_duplicate_macs: 0
|
||||
|
||||
# if 1, cobbler will allow settings to be changed dynamically without
|
||||
# a restart of the cobblerd daemon. You can only change this variable
|
||||
# by manually editing the settings file, and you MUST restart cobblerd
|
||||
# after changing it.
|
||||
allow_dynamic_settings: 0
|
||||
|
||||
# by default, installs are *not* set to send installation logs to the cobbler
|
||||
# # # server. With 'anamon_enabled', kickstart templates may use the pre_anamon
|
||||
# # # snippet to allow remote live monitoring of their installations from the
|
||||
# # # cobbler server. Installation logs will be stored under
|
||||
# # # /var/log/cobbler/anamon/. NOTE: This does allow an xmlrpc call to send logs
|
||||
# # # to this directory, without authentication, so enable only if you are
|
||||
# # # ok with this limitation.
|
||||
anamon_enabled: 1
|
||||
|
||||
# If using authn_pam in the modules.conf, this can be configured
|
||||
# to change the PAM service authentication will be tested against.
|
||||
# The default value is "login".
|
||||
authn_pam_service: "login"
|
||||
|
||||
# Email out a report when cobbler finishes installing a system.
|
||||
# enabled: set to 1 to turn this feature on
|
||||
# sender: optional
|
||||
# email: which addresses to email
|
||||
# smtp_server: used to specify another server for an MTA
|
||||
# subject: use the default subject unless overridden
|
||||
build_reporting_enabled: 0
|
||||
build_reporting_sender: ""
|
||||
build_reporting_email: [ 'root@localhost' ]
|
||||
build_reporting_smtp_server: "localhost"
|
||||
build_reporting_subject: ""
|
||||
|
||||
# Cheetah-language kickstart templates can import Python modules.
|
||||
# while this is a useful feature, it is not safe to allow them to
|
||||
# import anything they want. This whitelists which modules can be
|
||||
# imported through Cheetah. Users can expand this as needed but
|
||||
# should never allow modules such as subprocess or those that
|
||||
# allow access to the filesystem as Cheetah templates are evaluated
|
||||
# by cobblerd as code.
|
||||
cheetah_import_whitelist:
|
||||
- "random"
|
||||
- "re"
|
||||
- "time"
|
||||
|
||||
# Default createrepo_flags to use for new repositories. If you have
|
||||
# createrepo >= 0.4.10, consider "-c cache --update -C", which can
|
||||
# dramatically improve your "cobbler reposync" time. "-s sha"
|
||||
# enables working with Fedora repos from F11/F12 from EL-4 or
|
||||
# EL-5 without python-hashlib installed (which is not available
|
||||
# on EL-4)
|
||||
createrepo_flags: "-c cache -s sha"
|
||||
|
||||
# if no kickstart is specified to profile add, use this template
|
||||
default_kickstart: /var/lib/cobbler/kickstarts/default.ks
|
||||
|
||||
# configure all installed systems to use these nameservers by default
|
||||
# unless defined differently in the profile. For DHCP configurations
|
||||
# you probably do /not/ want to supply this.
|
||||
default_name_servers: ['10.145.89.100']
|
||||
|
||||
# if using the authz_ownership module (see the Wiki), objects
|
||||
# created without specifying an owner are assigned to this
|
||||
# owner and/or group. Can be a comma seperated list.
|
||||
default_ownership:
|
||||
- "admin"
|
||||
|
||||
# cobbler has various sample kickstart templates stored
|
||||
# in /var/lib/cobbler/kickstarts/. This controls
|
||||
# what install (root) password is set up for those
|
||||
# systems that reference this variable. The factory
|
||||
# default is "cobbler" and cobbler check will warn if
|
||||
# this is not changed.
|
||||
# The simplest way to change the password is to run
|
||||
# openssl passwd -1
|
||||
# and put the output between the "" below.
|
||||
default_password_crypted: "$1$huawei$9OkoVJwO4W8vavlXd1bUS/"
|
||||
|
||||
# the default template type to use in the absence of any
|
||||
# other detected template. If you do not specify the template
|
||||
# with '#template=<template_type>' on the first line of your
|
||||
# templates/snippets, cobbler will assume try to use the
|
||||
# following template engine to parse the templates.
|
||||
#
|
||||
# Current valid values are: cheetah, jinja2
|
||||
default_template_type: "cheetah"
|
||||
|
||||
# for libvirt based installs in koan, if no virt bridge
|
||||
# is specified, which bridge do we try? For EL 4/5 hosts
|
||||
# this should be xenbr0, for all versions of Fedora, try
|
||||
# "virbr0". This can be overriden on a per-profile
|
||||
# basis or at the koan command line though this saves
|
||||
# typing to just set it here to the most common option.
|
||||
default_virt_bridge: xenbr0
|
||||
|
||||
# use this as the default disk size for virt guests (GB)
|
||||
default_virt_file_size: 5
|
||||
|
||||
# use this as the default memory size for virt guests (MB)
|
||||
default_virt_ram: 512
|
||||
|
||||
# if koan is invoked without --virt-type and no virt-type
|
||||
# is set on the profile/system, what virtualization type
|
||||
# should be assumed? Values: xenpv, xenfv, qemu, vmware
|
||||
# (NOTE: this does not change what virt_type is chosen by import)
|
||||
default_virt_type: xenpv
|
||||
|
||||
# enable gPXE booting? Enabling this option will cause cobbler
|
||||
# to copy the undionly.kpxe file to the tftp root directory,
|
||||
# and if a profile/system is configured to boot via gpxe it will
|
||||
# chain load off pxelinux.0.
|
||||
# Default: 0
|
||||
enable_gpxe: 0
|
||||
|
||||
# controls whether cobbler will add each new profile entry to the default
|
||||
# PXE boot menu. This can be over-ridden on a per-profile
|
||||
# basis when adding/editing profiles with --enable-menu=0/1. Users
|
||||
# should ordinarily leave this setting enabled unless they are concerned
|
||||
# with accidental reinstalls from users who select an entry at the PXE
|
||||
# boot menu. Adding a password to the boot menus templates
|
||||
# may also be a good solution to prevent unwanted reinstallations
|
||||
enable_menu: 0
|
||||
|
||||
# enable Func-integration? This makes sure each installed machine is set up
|
||||
# to use func out of the box, which is a powerful way to script and control
|
||||
# remote machines.
|
||||
# Func lives at http://fedorahosted.org/func
|
||||
# read more at https://github.com/cobbler/cobbler/wiki/Func-integration
|
||||
# you will need to mirror Fedora/EPEL packages for this feature, so see
|
||||
# https://github.com/cobbler/cobbler/wiki/Manage-yum-repos if you want cobbler
|
||||
# to help you with this
|
||||
func_auto_setup: 0
|
||||
func_master: overlord.example.org
|
||||
|
||||
# change this port if Apache is not running plaintext on port
|
||||
# 80. Most people can leave this alone.
|
||||
http_port: 80
|
||||
|
||||
# kernel options that should be present in every cobbler installation.
|
||||
# kernel options can also be applied at the distro/profile/system
|
||||
# level.
|
||||
kernel_options:
|
||||
ksdevice: bootif
|
||||
lang: ' '
|
||||
text: ~
|
||||
|
||||
# s390 systems require additional kernel options in addition to the
|
||||
# above defaults
|
||||
kernel_options_s390x:
|
||||
RUNKS: 1
|
||||
ramdisk_size: 40000
|
||||
root: /dev/ram0
|
||||
ro: ~
|
||||
ip: off
|
||||
vnc: ~
|
||||
|
||||
# configuration options if using the authn_ldap module. See the
|
||||
# the Wiki for details. This can be ignored if you are not using
|
||||
# LDAP for WebUI/XMLRPC authentication.
|
||||
ldap_server: "ldap.example.com"
|
||||
ldap_base_dn: "DC=example,DC=com"
|
||||
ldap_port: 389
|
||||
ldap_tls: 1
|
||||
ldap_anonymous_bind: 1
|
||||
ldap_search_bind_dn: ''
|
||||
ldap_search_passwd: ''
|
||||
ldap_search_prefix: 'uid='
|
||||
ldap_tls_cacertfile: ''
|
||||
ldap_tls_keyfile: ''
|
||||
ldap_tls_certfile: ''
|
||||
|
||||
# cobbler has a feature that allows for integration with config management
|
||||
# systems such as Puppet. The following parameters work in conjunction with
|
||||
# --mgmt-classes and are described in furhter detail at:
|
||||
# https://github.com/cobbler/cobbler/wiki/Using-cobbler-with-a-configuration-management-system
|
||||
mgmt_classes: []
|
||||
mgmt_parameters:
|
||||
from_cobbler: 1
|
||||
|
||||
# if enabled, this setting ensures that puppet is installed during
|
||||
# machine provision, a client certificate is generated and a
|
||||
# certificate signing request is made with the puppet master server
|
||||
puppet_auto_setup: 0
|
||||
|
||||
# when puppet starts on a system after installation it needs to have
|
||||
# its certificate signed by the puppet master server. Enabling the
|
||||
# following feature will ensure that the puppet server signs the
|
||||
# certificate after installation if the puppet master server is
|
||||
# running on the same machine as cobbler. This requires
|
||||
# puppet_auto_setup above to be enabled
|
||||
sign_puppet_certs_automatically: 0
|
||||
|
||||
# location of the puppet executable, used for revoking certificates
|
||||
puppetca_path: "/usr/bin/puppet"
|
||||
|
||||
# when a puppet managed machine is reinstalled it is necessary to
|
||||
# remove the puppet certificate from the puppet master server before a
|
||||
# new certificate is signed (see above). Enabling the following
|
||||
# feature will ensure that the certificate for the machine to be
|
||||
# installed is removed from the puppet master server if the puppet
|
||||
# master server is running on the same machine as cobbler. This
|
||||
# requires puppet_auto_setup above to be enabled
|
||||
remove_old_puppet_certs_automatically: 0
|
||||
|
||||
# choose a --server argument when running puppetd/puppet agent during kickstart
|
||||
#puppet_server: 'puppet'
|
||||
|
||||
# let cobbler know that you're using a newer version of puppet
|
||||
# choose version 3 to use: 'puppet agent'; version 2 uses status quo: 'puppetd'
|
||||
#puppet_version: 2
|
||||
|
||||
# choose whether to enable puppet parameterized classes or not.
|
||||
# puppet versions prior to 2.6.5 do not support parameters
|
||||
#puppet_parameterized_classes: 1
|
||||
|
||||
# set to 1 to enable Cobbler's DHCP management features.
|
||||
# the choice of DHCP management engine is in /etc/cobbler/modules.conf
|
||||
manage_dhcp: 1
|
||||
|
||||
# set to 1 to enable Cobbler's DNS management features.
|
||||
# the choice of DNS mangement engine is in /etc/cobbler/modules.conf
|
||||
manage_dns: 1
|
||||
|
||||
# set to path of bind chroot to create bind-chroot compatible bind
|
||||
# configuration files. This should be automatically detected.
|
||||
bind_chroot_path: ""
|
||||
|
||||
# set to the ip address of the master bind DNS server for creating secondary
|
||||
# bind configuration files
|
||||
bind_master: 127.0.0.1
|
||||
|
||||
# set to 1 to enable Cobbler's TFTP management features.
|
||||
# the choice of TFTP mangement engine is in /etc/cobbler/modules.conf
|
||||
manage_tftpd: 1
|
||||
|
||||
# set to 1 to enable Cobbler's RSYNC management features.
|
||||
manage_rsync: 0
|
||||
|
||||
# if using BIND (named) for DNS management in /etc/cobbler/modules.conf
|
||||
# and manage_dns is enabled (above), this lists which zones are managed
|
||||
# See the Wiki (https://github.com/cobbler/cobbler/wiki/Dns-management) for more info
|
||||
manage_forward_zones: ['ods.com']
|
||||
manage_reverse_zones: ['10','172.16']
|
||||
|
||||
# if using cobbler with manage_dhcp, put the IP address
|
||||
# of the cobbler server here so that PXE booting guests can find it
|
||||
# if you do not set this correctly, this will be manifested in TFTP open timeouts.
|
||||
next_server: {{ cobbler_server }}
|
||||
|
||||
# settings for power management features. optional.
|
||||
# see https://github.com/cobbler/cobbler/wiki/Power-management to learn more
|
||||
# choices (refer to codes.py):
|
||||
# apc_snmp bladecenter bullpap drac ether_wake ilo integrity
|
||||
# ipmilan ipmitool lpar rsa virsh wti
|
||||
power_management_default_type: 'ipmitool'
|
||||
|
||||
# the commands used by the power management module are sourced
|
||||
# from what directory?
|
||||
power_template_dir: "/etc/cobbler/power"
|
||||
|
||||
# if this setting is set to 1, cobbler systems that pxe boot
|
||||
# will request at the end of their installation to toggle the
|
||||
# --netboot-enabled record in the cobbler system record. This eliminates
|
||||
# the potential for a PXE boot loop if the system is set to PXE
|
||||
# first in it's BIOS order. Enable this if PXE is first in your BIOS
|
||||
# boot order, otherwise leave this disabled. See the manpage
|
||||
# for --netboot-enabled.
|
||||
pxe_just_once: 1
|
||||
|
||||
# the templates used for PXE config generation are sourced
|
||||
# from what directory?
|
||||
pxe_template_dir: "/etc/cobbler/pxe"
|
||||
|
||||
# Path to where system consoles are
|
||||
consoles: "/var/consoles"
|
||||
|
||||
# Are you using a Red Hat management platform in addition to Cobbler?
|
||||
# Cobbler can help you register to it. Choose one of the following:
|
||||
# "off" : I'm not using Red Hat Network, Satellite, or Spacewalk
|
||||
# "hosted" : I'm using Red Hat Network
|
||||
# "site" : I'm using Red Hat Satellite Server or Spacewalk
|
||||
# You will also want to read: https://github.com/cobbler/cobbler/wiki/Tips-for-RHN
|
||||
redhat_management_type: "off"
|
||||
|
||||
# if redhat_management_type is enabled, choose your server
|
||||
# "management.example.org" : For Satellite or Spacewalk
|
||||
# "xmlrpc.rhn.redhat.com" : For Red Hat Network
|
||||
# This setting is also used by the code that supports using Spacewalk/Satellite users/passwords
|
||||
# within Cobbler Web and Cobbler XMLRPC. Using RHN Hosted for this is not supported.
|
||||
# This feature can be used even if redhat_management_type is off, you just have
|
||||
# to have authn_spacewalk selected in modules.conf
|
||||
redhat_management_server: "xmlrpc.rhn.redhat.com"
|
||||
|
||||
# specify the default Red Hat authorization key to use to register
|
||||
# system. If left blank, no registration will be attempted. Similarly
|
||||
# you can set the --redhat-management-key to blank on any system to
|
||||
# keep it from trying to register.
|
||||
redhat_management_key: ""
|
||||
|
||||
# if using authn_spacewalk in modules.conf to let cobbler authenticate
|
||||
# against Satellite/Spacewalk's auth system, by default it will not allow per user
|
||||
# access into Cobbler Web and Cobbler XMLRPC.
|
||||
# in order to permit this, the following setting must be enabled HOWEVER
|
||||
# doing so will permit all Spacewalk/Satellite users of certain types to edit all
|
||||
# of cobbler's configuration.
|
||||
# these roles are: config_admin and org_admin
|
||||
# users should turn this on only if they want this behavior and
|
||||
# do not have a cross-multi-org seperation concern. If you have
|
||||
# a single org in your satellite, it's probably safe to turn this
|
||||
# on and then you can use CobblerWeb alongside a Satellite install.
|
||||
redhat_management_permissive: 0
|
||||
|
||||
# if set to 1, allows /usr/bin/cobbler-register (part of the koan package)
|
||||
# to be used to remotely add new cobbler system records to cobbler.
|
||||
# this effectively allows for registration of new hardware from system
|
||||
# records.
|
||||
register_new_installs: 0
|
||||
|
||||
# Flags to use for yum's reposync. If your version of yum reposync
|
||||
# does not support -l, you may need to remove that option.
|
||||
reposync_flags: "-l -n -d"
|
||||
|
||||
# These options will be used for an rsync initiated by cobbler replicate
|
||||
replicate_rsync_options: "-avzH"
|
||||
|
||||
# when DHCP and DNS management are enabled, cobbler sync can automatically
|
||||
# restart those services to apply changes. The exception for this is
|
||||
# if using ISC for DHCP, then omapi eliminates the need for a restart.
|
||||
# omapi, however, is experimental and not recommended for most configurations.
|
||||
# If DHCP and DNS are going to be managed, but hosted on a box that
|
||||
# is not on this server, disable restarts here and write some other
|
||||
# script to ensure that the config files get copied/rsynced to the destination
|
||||
# box. This can be done by modifying the restart services trigger.
|
||||
# Note that if manage_dhcp and manage_dns are disabled, the respective
|
||||
# parameter will have no effect. Most users should not need to change
|
||||
# this.
|
||||
restart_dns: 1
|
||||
restart_dhcp: 1
|
||||
|
||||
# install triggers are scripts in /var/lib/cobbler/triggers/install
|
||||
# that are triggered in kickstart pre and post sections. Any
|
||||
# executable script in those directories is run. They can be used
|
||||
# to send email or perform other actions. They are currently
|
||||
# run as root so if you do not need this functionality you can
|
||||
# disable it, though this will also disable "cobbler status" which
|
||||
# uses a logging trigger to audit install progress.
|
||||
run_install_triggers: 1
|
||||
|
||||
# enables a trigger which version controls all changes to /var/lib/cobbler
|
||||
# when add, edit, or sync events are performed. This can be used
|
||||
# to revert to previous database versions, generate RSS feeds, or for
|
||||
# other auditing or backup purposes. "git" and "hg" are currently suported,
|
||||
# but git is the recommend SCM for use with this feature.
|
||||
scm_track_enabled: 0
|
||||
scm_track_mode: "git"
|
||||
|
||||
# this is the address of the cobbler server -- as it is used
|
||||
# by systems during the install process, it must be the address
|
||||
# or hostname of the system as those systems can see the server.
|
||||
# if you have a server that appears differently to different subnets
|
||||
# (dual homed, etc), you need to read the --server-override section
|
||||
# of the manpage for how that works.
|
||||
server: {{ cobbler_server }}
|
||||
|
||||
# If set to 1, all commands will be forced to use the localhost address
|
||||
# instead of using the above value which can force commands like
|
||||
# cobbler sync to open a connection to a remote address if one is in the
|
||||
# configuration and would traceback.
|
||||
client_use_localhost: 0
|
||||
|
||||
# If set to 1, all commands to the API (not directly to the XMLRPC
|
||||
# server) will go over HTTPS instead of plaintext. Be sure to change
|
||||
# the http_port setting to the correct value for the web server
|
||||
client_use_https: 0
|
||||
|
||||
# this is a directory of files that cobbler uses to make
|
||||
# templating easier. See the Wiki for more information. Changing
|
||||
# this directory should not be required.
|
||||
snippetsdir: /var/lib/cobbler/snippets
|
||||
|
||||
# Normally if a kickstart is specified at a remote location, this
|
||||
# URL will be passed directly to the kickstarting system, thus bypassing
|
||||
# the usual snippet templating Cobbler does for local kickstart files. If
|
||||
# this option is enabled, Cobbler will fetch the file contents internally
|
||||
# and serve a templated version of the file to the client.
|
||||
template_remote_kickstarts: 0
|
||||
|
||||
# should new profiles for virtual machines default to auto booting with the physical host when the physical host reboots?
|
||||
# this can be overridden on each profile or system object.
|
||||
virt_auto_boot: 1
|
||||
|
||||
# cobbler's web directory. Don't change this setting -- see the
|
||||
# Wiki on "relocating your cobbler install" if your /var partition
|
||||
# is not large enough.
|
||||
webdir: /var/www/cobbler
|
||||
|
||||
# cobbler's public XMLRPC listens on this port. Change this only
|
||||
# if absolutely needed, as you'll have to start supplying a new
|
||||
# port option to koan if it is not the default.
|
||||
xmlrpc_port: 25151
|
||||
|
||||
# "cobbler repo add" commands set cobbler up with repository
|
||||
# information that can be used during kickstart and is automatically
|
||||
# set up in the cobbler kickstart templates. By default, these
|
||||
# are only available at install time. To make these repositories
|
||||
# usable on installed systems (since cobbler makes a very convient)
|
||||
# mirror, set this to 1. Most users can safely set this to 1. Users
|
||||
# who have a dual homed cobbler server, or are installing laptops that
|
||||
# will not always have access to the cobbler server may wish to leave
|
||||
# this as 0. In that case, the cobbler mirrored yum repos are still
|
||||
# accessable at http://cobbler.example.org/cblr/repo_mirror and yum
|
||||
# configuration can still be done manually. This is just a shortcut.
|
||||
yum_post_install_mirror: 1
|
||||
|
||||
# the default yum priority for all the distros. This is only used
|
||||
# if yum-priorities plugin is used. 1=maximum. Tweak with caution.
|
||||
yum_distro_priority: 1
|
||||
|
||||
# Flags to use for yumdownloader. Not all versions may support
|
||||
# --resolve.
|
||||
yumdownloader_flags: "--resolve"
|
||||
|
||||
# sort and indent JSON output to make it more human-readable
|
||||
serializer_pretty_json: 0
|
||||
|
||||
# replication rsync options for distros, kickstarts, snippets set to override default value of "-avzH"
|
||||
replicate_rsync_options: "-avzH"
|
||||
|
||||
# replication rsync options for repos set to override default value of "-avzH"
|
||||
replicate_repo_rsync_options: "-avzH"
|
||||
|
|
@ -0,0 +1,20 @@
|
|||
# default: off
|
||||
# description: The tftp server serves files using the trivial file transfer \
|
||||
# protocol. The tftp protocol is often used to boot diskless \
|
||||
# workstations, download configuration files to network-aware printers, \
|
||||
# and to start the installation process for some operating systems.
|
||||
service tftp
|
||||
{
|
||||
disable = no
|
||||
log_type = SYSLOG local5 info
|
||||
socket_type = dgram
|
||||
protocol = udp
|
||||
wait = yes
|
||||
user = $user
|
||||
server = $binary
|
||||
server_args = -B 1380 -v -s $args
|
||||
instances = 1000
|
||||
per_source = 1000
|
||||
cps = 1000 2
|
||||
flags = IPv4
|
||||
}
|
||||
|
|
@ -1 +1,10 @@
|
|||
dockerized: True
|
||||
#dockerized: True
|
||||
compass_adapter_source: http://git.openstack.org/stackforge/compass-adapters
|
||||
compass_adapter_version: dev/experimental
|
||||
epel_file_name: epel-release-6-8.noarch.rpm
|
||||
epel_base_url: http://download.fedoraproject.org/pub/epel/6/x86_64/
|
||||
epel7_base_url: http://download.fedoraproject.org/pub/epel/7/x86_64/e/
|
||||
ubuntu_14_04_ppa_repo_url: https://s3-us-west-1.amazonaws.com/compass-local-repo/ubuntu/14.04/ubuntu_14_04_ppa_repo.tar.gz
|
||||
ubuntu_12_04_ppa_repo_url: https://s3-us-west-1.amazonaws.com/compass-local-repo/ubuntu/12.04/ubuntu_12_04_ppa_repo.tar.gz
|
||||
centos_6_5_ppa_repo_url: https://s3-us-west-1.amazonaws.com/compass-local-repo/centos/6.5/centos_6_5_ppa_repo.tar.gz
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,18 @@
|
|||
# Apache config for ods server
|
||||
#
|
||||
# Specify python path if you use virtualenv
|
||||
|
||||
WSGIDaemonProcess compass threads=4 display-name=%{GROUP}
|
||||
WSGIProcessGroup compass
|
||||
WSGIScriptAlias /api /var/www/compass/compass.wsgi
|
||||
WSGISocketPrefix /var/run/wsgi
|
||||
|
||||
<VirtualHost *:80>
|
||||
DocumentRoot /var/www/compass_web/v2
|
||||
|
||||
<Directory "/var/www/compass_web/v2">
|
||||
Options Indexes FollowSymLinks
|
||||
Order allow,deny
|
||||
Allow from all
|
||||
</Directory>
|
||||
</VirtualHost>
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
---
|
||||
|
||||
- name: restart compass service
|
||||
service: name={{ item }} state=restarted enabled=yes
|
||||
with_items:
|
||||
- compass-celeryd
|
||||
- compass-progress-updated
|
||||
|
||||
- name: restart http service
|
||||
service: name=httpd state=restarted enabled=yes
|
||||
|
|
@ -0,0 +1,177 @@
|
|||
---
|
||||
|
||||
- name: install base packages
|
||||
yum: name={{ item }} state=present
|
||||
with_items:
|
||||
- wget
|
||||
- git
|
||||
|
||||
- name: check epel presence
|
||||
command: rpm -q epel-release
|
||||
register: epel_presence
|
||||
|
||||
#- name: get epel version
|
||||
# command: 'wget -q {{ epel_base_url }} -O - |grep -oE "(href=\"epel-release-6-[0-9,.].*)" | cut -d'"' -f2'
|
||||
# register: epel_file_name
|
||||
# when: epel_presence.rc != 0
|
||||
|
||||
- name: install epel
|
||||
yum: name={{ epel_base_url }}/{{ epel_file_name }} state=present
|
||||
when: epel_presence.rc != 0
|
||||
|
||||
- name: yum update
|
||||
yum: name=* state=latest
|
||||
|
||||
- name: install essentials
|
||||
yum: name={{ item }} state=present
|
||||
with_items:
|
||||
- git
|
||||
- python-setuptools
|
||||
- python-devel
|
||||
- mysql-devel
|
||||
- httpd
|
||||
- mysql-server
|
||||
- mysql
|
||||
- MySQL-python
|
||||
- redis
|
||||
- mod_wsgi
|
||||
- rabbitmq-server
|
||||
|
||||
- name: stop iptables
|
||||
service: name=iptables state=stopped enabled=no
|
||||
|
||||
- name: disable selinux
|
||||
selinux: state=disabled
|
||||
|
||||
- name: disable selinux real time
|
||||
shell: echo 0 > /selinux/enforce
|
||||
|
||||
# TODO: currently compass use root user and group, apache has to
|
||||
# be in root group to write wsgi logs in /var/log/compass/, need
|
||||
# to run compass as its own user in the future.
|
||||
# - name: append compass group to apache user groups
|
||||
# user: name=apache groups=root append=yes
|
||||
|
||||
- name: start mysqld
|
||||
service: name=mysqld state=started enabled=yes
|
||||
|
||||
- name: start rabbitmq server
|
||||
service: name=rabbitmq-server state=started enabled=yes
|
||||
|
||||
- name: initialize mysql password
|
||||
mysql_user: user={{ compass_db_user }} password={{ compass_db_pass }}
|
||||
priv=compass.*:ALL,GRANT state=present
|
||||
|
||||
- name: create compass database
|
||||
mysql_db: name=compass state=present
|
||||
|
||||
- name: install pip
|
||||
easy_install: name=pip
|
||||
|
||||
- name: install virtualenv
|
||||
pip: name=virtualenv
|
||||
|
||||
- name: cloning compass-core
|
||||
git: repo=http://git.openstack.org/stackforge/compass-core.git
|
||||
dest={{ COMPASS_PATH }}
|
||||
version=dev/experimental
|
||||
force=yes
|
||||
|
||||
- name: pip install compass into virtualenv
|
||||
pip: name={{ COMPASS_PATH }} virtualenv={{ COMPASS_PATH }}/venv
|
||||
|
||||
- name: create compass directories
|
||||
file: path={{ item }} state=directory
|
||||
with_items:
|
||||
- /etc/compass
|
||||
- /opt/compass/bin
|
||||
- /var/www/compass
|
||||
- /var/www/compass_web
|
||||
|
||||
- name: create /var/log/compass
|
||||
file: path=/var/log/compass mode=0777 state=directory
|
||||
|
||||
- name: write python home into switch virtualenv
|
||||
lineinfile: dest={{ COMPASS_PATH }}/bin/switch_virtualenv.py.template
|
||||
regexp="^virtual\_env\ \=\ \'\$PythonHome\'"
|
||||
line="virtual_env = '/opt/compass-core/venv'"
|
||||
|
||||
- name: rename switch_virtualenv template
|
||||
command: cp {{ COMPASS_PATH }}/bin/switch_virtualenv.py.template {{ COMPASS_PATH }}/bin/switch_virtualenv.py
|
||||
|
||||
- name: copy compass config files
|
||||
shell: cp -rf {{ COMPASS_PATH }}/conf/* /etc/compass/
|
||||
|
||||
- name: copy service init file
|
||||
shell: cp -rf {{ COMPASS_PATH }}/service/* /etc/init.d/
|
||||
|
||||
- name: copy compass bin file
|
||||
shell: cp -rf {{ COMPASS_PATH }}/bin/*.py /opt/compass/bin/
|
||||
|
||||
- name: copy compass shell script
|
||||
shell: cp -rf {{ COMPASS_PATH }}/bin/*.sh /opt/compass/bin/
|
||||
|
||||
- name: copy compass executable
|
||||
shell: cp {{ COMPASS_PATH }}/bin/compassd /usr/bin/
|
||||
|
||||
- name: link compass check
|
||||
file: src=/opt/compass/bin/compass_check.py dest=/usr/bin/compass state=link
|
||||
|
||||
- name: link compass wsgi
|
||||
file: src=/opt/compass/bin/compass_wsgi.py dest=/var/www/compass/compass.wsgi state=link
|
||||
|
||||
- name: change celery env
|
||||
shell: echo "export C_FORCE_ROOT=1" > /etc/profile.d/celery_env.sh
|
||||
|
||||
- name: change file mode
|
||||
file: path=/etc/profile.d/celery_env.sh mode=0755
|
||||
|
||||
- name: pip install compass into virtualenv
|
||||
pip: name={{ COMPASS_PATH }} virtualenv={{ COMPASS_PATH }}/venv
|
||||
|
||||
- name: add compass setting
|
||||
template: src=compass.setting.j2 dest=/etc/compass/setting
|
||||
notify:
|
||||
restart compass service
|
||||
|
||||
- name: add cobbler setting
|
||||
template: src=cobbler.conf.nodocker.j2 dest=/etc/compass/os_installer/cobbler.conf
|
||||
notify:
|
||||
restart compass service
|
||||
|
||||
- name: link celery bin file
|
||||
file: src={{ COMPASS_PATH }}/venv/bin/celery dest=/opt/compass/bin/celery state=link
|
||||
|
||||
- name: create redis folders
|
||||
file: path={{ item }} state=directory owner=redis
|
||||
with_items:
|
||||
- /var/log/redis
|
||||
- /var/lib/redis
|
||||
- /var/run/redis
|
||||
|
||||
- name: make sure redis service not running
|
||||
command: killall -9 redis-server
|
||||
ignore_errors: yes
|
||||
|
||||
- name: restart redis service
|
||||
service: name=redis state=restarted enabled=yes
|
||||
|
||||
- name: initialize db for compass
|
||||
shell: /opt/compass/bin/manage_db.py createdb
|
||||
run_once: True
|
||||
|
||||
- name: copy ods-server httpd config
|
||||
copy: src=ods-server.conf dest=/etc/httpd/conf.d/ods-server.conf
|
||||
notify:
|
||||
restart http service
|
||||
|
||||
- name: clone compass web
|
||||
git: repo=http://git.openstack.org/stackforge/compass-web.git
|
||||
dest=/opt/compass-web
|
||||
force=yes
|
||||
|
||||
- name: copy web ui files
|
||||
shell: cp -rf /opt/compass-web/v2 /var/www/compass_web/
|
||||
|
||||
#- name: run compass check
|
||||
# command: compass check
|
||||
|
|
@ -0,0 +1,9 @@
|
|||
NAME = 'cobbler'
|
||||
INSTANCE_NAME = 'cobbler'
|
||||
SETTINGS = {
|
||||
'cobbler_url': 'http://{{ cobbler_server }}/cobbler_api',
|
||||
'credentials': {
|
||||
'username': 'cobbler',
|
||||
'password': 'cobbler'
|
||||
}
|
||||
}
|
||||
|
|
@ -1,7 +1,7 @@
|
|||
CONFIG_DIR = '/etc/compass'
|
||||
DATABASE_TYPE = 'mysql'
|
||||
DATABASE_USER = 'root'
|
||||
DATABASE_PASSWORD = 'root'
|
||||
DATABASE_USER = '{{ compass_db_user }}'
|
||||
DATABASE_PASSWORD = '{{ compass_db_pass }}'
|
||||
DATABASE_SERVER = '127.0.0.1:3306'
|
||||
DATABASE_NAME = 'compass'
|
||||
SQLALCHEMY_DATABASE_URI = '%s://%s:%s@%s/%s' % (DATABASE_TYPE, DATABASE_USER, DATABASE_PASSWORD, DATABASE_SERVER, DATABASE_NAME)
|
||||
|
|
@ -24,10 +24,10 @@ POLLSWITCH_INTERVAL=60
|
|||
SWITCHES = [
|
||||
]
|
||||
TMPL_DIR = '/etc/compass/templates'
|
||||
COMPASS_SUPPORTED_PROXY = 'http://{{ ansible_ssh_host }}:3128'
|
||||
COMPASS_SUPPORTED_DEFAULT_NOPROXY = ['127.0.0.1','{{ ansible_ssh_host }}','compass']
|
||||
COMPASS_SUPPORTED_NTP_SERVER = '{{ ansible_ssh_host }}'
|
||||
COMPASS_SUPPORTED_DNS_SERVERS = ['{{ ansible_ssh_host }}']
|
||||
COMPASS_SUPPORTED_DOMAINS = ['ods.com']
|
||||
COMPASS_SUPPORTED_DEFAULT_GATEWAY = '{{ mgmt_router }}'
|
||||
COMPASS_SUPPORTED_LOCAL_REPO = 'http://{{ ansible_ssh_host }}'
|
||||
#COMPASS_SUPPORTED_PROXY = 'http://{{ ansible_ssh_host }}:3128'
|
||||
#COMPASS_SUPPORTED_DEFAULT_NOPROXY = ['127.0.0.1','{{ ansible_ssh_host }}','compass']
|
||||
#COMPASS_SUPPORTED_NTP_SERVER = '{{ ansible_ssh_host }}'
|
||||
#COMPASS_SUPPORTED_DNS_SERVERS = ['{{ ansible_ssh_host }}']
|
||||
#COMPASS_SUPPORTED_DOMAINS = ['ods.com']
|
||||
#COMPASS_SUPPORTED_DEFAULT_GATEWAY = '{{ mgmt_router }}'
|
||||
#COMPASS_SUPPORTED_LOCAL_REPO = 'http://{{ ansible_ssh_host }}'
|
||||
|
|
|
|||
|
|
@ -1 +1,4 @@
|
|||
dockerized: True
|
||||
dockerized: False
|
||||
compass_db_user: compass
|
||||
compass_db_pass: compass
|
||||
COMPASS_PATH: /opt/compass-core
|
||||
|
|
|
|||
Loading…
Reference in New Issue