Fix inaccuracy in user guide (private net example)
In User Guide, for example, we use for Private network: IP Range: 172.100.203.33 - 172.100.203.254 But in section where we configure gateway for Private network we use: 10.88.12.0/24 Fixed this difference. Change-Id: Iebfbfd53bc2542e92b0c2ab815f1141a53548af6
This commit is contained in:
parent
52a3bb920d
commit
e0910c62aa
52
README.md
52
README.md
|
@ -85,8 +85,8 @@ OpenStack cluster in the usual way, with the following guidelines:
|
|||
"Calico networking" as the networking setup
|
||||
|
||||
- Under the network tab, configure the `Public` settings to reduce
|
||||
Floating-IP addresses pool to one address,
|
||||
because Calico does not support Floating IPs use-case.
|
||||
Floating-IP addresses pool to one address,
|
||||
because Calico does not support Floating IPs use-case.
|
||||
For example (exact values will
|
||||
depend on your setup):
|
||||
|
||||
|
@ -101,8 +101,8 @@ OpenStack cluster in the usual way, with the following guidelines:
|
|||
Neutron L3:
|
||||
Floating IP range: 172.18.203.254 - 172.18.203.254
|
||||
|
||||
- Under the network tab, configure the `Private` network settings
|
||||
(this network will be used for BGP peering between custer nodes, route
|
||||
- Under the network tab, configure the `Private` network settings
|
||||
(this network will be used for BGP peering between custer nodes, route
|
||||
reflectors and external peers, configured by UI). Do not forget to exclude
|
||||
Your BGP peers and gateway from the IP range!
|
||||
For example (exact values will depend on your setup):
|
||||
|
@ -113,28 +113,28 @@ OpenStack cluster in the usual way, with the following guidelines:
|
|||
|
||||
- Under Fuel CLI, configure gateway for `Private` network.
|
||||
This gateway will be used for pass outgoing external traffic from instances.
|
||||
In most cases the same gateway node should be also an external BGB peer
|
||||
In most cases the same gateway node should be also an external BGB peer
|
||||
(see below, external BGB peer-1).
|
||||
|
||||
[root@nailgun ~]# fuel2 network-group list
|
||||
+----+---------+------------+---------------+---------+----------+
|
||||
| id | name | vlan_start | cidr | gateway | group_id |
|
||||
+----+---------+------------+---------------+---------+----------+
|
||||
| 5 | private | None | 10.88.12.0/24 | None | 1 |
|
||||
+----+---------+------------+---------------+---------+----------+
|
||||
[root@nailgun ~]# fuel2 network-group update -g 10.88.12.1 5
|
||||
+------------+---------------+
|
||||
| Field | Value |
|
||||
+------------+---------------+
|
||||
| id | 5 |
|
||||
| name | private |
|
||||
| vlan_start | None |
|
||||
| cidr | 10.88.12.0/24 |
|
||||
| gateway | 10.88.12.1 |
|
||||
| group_id | 1 |
|
||||
+------------+---------------+
|
||||
+----+---------+------------+------------------+---------+----------+
|
||||
| id | name | vlan_start | cidr | gateway | group_id |
|
||||
+----+---------+------------+------------------+---------+----------+
|
||||
| 5 | private | None | 172.100.203.0/24 | None | 1 |
|
||||
+----+---------+------------+------------------+---------+----------+
|
||||
[root@nailgun ~]# fuel2 network-group update -g 172.100.203.1 5
|
||||
+------------+------------------+
|
||||
| Field | Value |
|
||||
+------------+------------------+
|
||||
| id | 5 |
|
||||
| name | private |
|
||||
| vlan_start | None |
|
||||
| cidr | 172.100.203.0/24 |
|
||||
| gateway | 172.100.203.1 |
|
||||
| group_id | 1 |
|
||||
+------------+------------------+
|
||||
|
||||
- Under the network tab, configure IP pool for Calico network fabric.
|
||||
- Under the network tab, configure IP pool for Calico network fabric.
|
||||
Ip addresses from this pool will be assigned to VM instances:
|
||||
|
||||
Settings
|
||||
|
@ -149,17 +149,17 @@ OpenStack cluster in the usual way, with the following guidelines:
|
|||
|
||||
[X] Allow external BGP peering
|
||||
External BGP peers:
|
||||
peer-1:65000:10.88.12.1
|
||||
peer-1:65000:172.100.203.1
|
||||
peer-2:65002:172.100.203.13
|
||||
|
||||
- Add nodes (for meaningful testing, you will need at least two compute nodes
|
||||
in addition to the controller). Calico-RR (route-reflector) and Calico-ETCD
|
||||
in addition to the controller). Calico-RR (route-reflector) and Calico-ETCD
|
||||
node roles may be co-located on Controller nodes or deployed separately.
|
||||
|
||||
- Under the nodes tab, configure networks to NICs mapping
|
||||
- Under the nodes tab, configure networks to NICs mapping
|
||||
(exact positions will depend on your setup)
|
||||
|
||||
- Deploy changes
|
||||
|
||||
- Do not forget to configure BGP peering session on you infrastructure
|
||||
- Do not forget to configure BGP peering session on you infrastructure
|
||||
BGP peers.
|
||||
|
|
Loading…
Reference in New Issue