1.1 KiB
Usage
The easiest way to check that the plugin works as expected is to
create a network or router using the neutron
command-line
tool:
[root@nailgun ~]# ssh node-4 # node-4 is a controller node
root@node-4:~# . openrc
root@node-4:~# neutron router-create r1
You can monitor the plugin actions in
/var/log/neutron/server.log
and see how edges appear in the
list of the Networking & Security -> NSX Edges
pane
in vSphere Web Client. If you see error messages, check the Troubleshooting <troubleshooting>
section.
STT MTU considerations
NSX Transformers uses STT protocol to encapsulate VM traffic. The protocol adds additional data to the packet. Consider increasing MTU on the network equipment connected to hosts that will emit STT traffic.
Consider the following calculation:
Outer IPv4 header == 20 bytes
Outer TCP header == 24 bytes
STT header == 18 bytes
Inner Ethernet frame == 1518 (14 bytes header, 4 bytes 802.1q header, 1500 Payload)
Summarizing all of these we get 1580 bytes. Consider increasing MTU on the network hardware up to 1600 bytes.