627 lines
26 KiB
INI
627 lines
26 KiB
INI
#
|
|
# SNMPTT v1.4 Configuration File
|
|
#
|
|
# Linux / Unix
|
|
#
|
|
|
|
[General]
|
|
# Name of this system for $H variable. If blank, system name will be the computer's
|
|
# hostname via Sys::Hostname.
|
|
snmptt_system_name =
|
|
|
|
# Set to either 'standalone' or 'daemon'
|
|
# standalone: snmptt called from snmptrapd.conf
|
|
# daemon: snmptrapd.conf calls snmptthandler
|
|
# Ignored by Windows. See documentation
|
|
mode = standalone
|
|
|
|
# Set to 1 to allow multiple trap definitions to be executed for the same trap.
|
|
# Set to 0 to have it stop after the first match.
|
|
# This option should normally be set to 1. See the section 'SNMPTT.CONF Configuration
|
|
# file Notes' in the SNMPTT documentation for more information.
|
|
# Note: Wildcard matches are only matched if there are NO exact matches. This takes
|
|
# into consideration the NODES list. Therefore, if there is a matching trap, but
|
|
# the NODES list prevents it from being considered a match, the wildcard entry will
|
|
# only be used if there are no other exact matches.
|
|
multiple_event = 1
|
|
|
|
# SNMPTRAPD passes the IP address of device sending the trap, and the IP address of the
|
|
# actual SNMP agent. These addresses could differ if the trap was sent on behalf of another
|
|
# device (relay, proxy etc).
|
|
# If DNS is enabled, the agent IP address is converted to a host name using a DNS lookup
|
|
# (which includes the local hosts file, depending on how the OS is configured). This name
|
|
# will be used for: NODES entry matches, hostname field in logged traps (file / database),
|
|
# and the $A variable. Host names on the NODES line will be resolved and the IP address
|
|
# will then be used for comparing.
|
|
# Set to 0 to disable DNS resolution
|
|
# Set to 1 to enable DNS resolution
|
|
dns_enable = 0
|
|
|
|
# Set to 0 to enable the use of FQDN (Fully Qualified Domain Names). If a host name is
|
|
# passed to SNMPTT that contains a domain name, it will not be altered in any way by
|
|
# SNMPTT. This also affects resolve_value_ip_addresses.
|
|
# Set to 1 to have SNMPTT strip the domain name from the host name passed to it. For
|
|
# example, server01.domain.com would be changed to server01
|
|
# Set to 2 to have SNMPTT strip the domain name from the host name passed to it
|
|
# based on the list of domains in strip_domain_list
|
|
strip_domain = 0
|
|
|
|
# List of domain names that should be stripped when strip_domain is set to 2.
|
|
# List can contain one or more domains. For example, if the FQDN of a host is
|
|
# server01.city.domain.com and the list contains domain.com, the 'host' will be
|
|
# set as server01.city.
|
|
strip_domain_list = <<END
|
|
domain.com
|
|
END
|
|
|
|
# Configures how IP addresses contained in the VALUE of the variable bindings are handled.
|
|
# This only applies to the values for $n, $+n, $-n, $vn, $+*, $-*.
|
|
# Set to 0 to disable resolving ip address to host names
|
|
# Set to 1 to enable resolving ip address to host names
|
|
# Note: net_snmp_perl_enable *must* be enabled. The strip_domain settings influence the
|
|
# format of the resolved host name. DNS must be enabled (dns_enable)
|
|
resolve_value_ip_addresses = 0
|
|
|
|
# Set to 1 to enable the use of the Perl module from the UCD-SNMP / NET-SNMP package.
|
|
# This is required for $v variable substitution to work, and also for some other options
|
|
# that are enabled in this .ini file.
|
|
# Set to 0 to disable the use of the Perl module from the UCD-SNMP / NET-SNMP package.
|
|
# Note: Enabling this with stand-alone mode can cause SNMPTT to run very slowly due to
|
|
# the loading of the MIBS at startup.
|
|
net_snmp_perl_enable = 1
|
|
|
|
# Set to 1 to enable caching of OID and ENUM translations when net_snmp_perl_enable is
|
|
# enabled. Enabling this should result in faster translations.
|
|
# Set to 0 to disable caching.
|
|
# Note: Restart SNMPTT after updating the MIB files for Net-SNMP, otherwise the cache may
|
|
# contain inaccurate data. Defaults to 1.
|
|
net_snmp_perl_cache_enable = 1
|
|
|
|
# This sets the best_guess parameter used by the UCD-SNMP / NET-SNMP Perl module for
|
|
# translating symbolic nams to OIDs and vice versa.
|
|
# For UCD-SNMP, and Net-SNMP 5.0.8 and previous versions, set this value to 0.
|
|
# For Net-SNMP 5.0.9, or any Net-SNMP with patch 722075 applied, set this value to 2.
|
|
# A value of 2 is equivalent to -IR on Net-SNMP command line utilities.
|
|
# UCD-SNMP and Net-SNMP 5.0.8 and previous may not be able to translate certain formats of
|
|
# symbolic names such as RFC1213-MIB::sysDescr. Net-SNMP 5.0.9 or patch 722075 will allow
|
|
# all possibilities to be translated. See the FAQ section in the README for more info
|
|
net_snmp_perl_best_guess = 0
|
|
|
|
# Configures how the OID of the received trap is handled when outputting to a log file /
|
|
# database. It does NOT apply to the $O variable.
|
|
# Set to 0 to use the default of numerical OID
|
|
# Set to 1 to translate the trap OID to short text (symbolic form) (eg: linkUp)
|
|
# Set to 2 to translate the trap OID to short text with module name (eg: IF-MIB::linkUp)
|
|
# Set to 3 to translate the trap OID to long text (eg: iso...snmpTraps.linkUp)
|
|
# Set to 4 to translate the trap OID to long text with module name (eg:
|
|
# IF-MIB::iso...snmpTraps.linkUp)
|
|
# Note: -The output of the long format will vary depending on the version of Net-SNMP you
|
|
# are using.
|
|
# -net_snmp_perl_enable *must* be enabled
|
|
# -If using database logging, ensure the trapoid column is large enough to hold the
|
|
# entire line
|
|
translate_log_trap_oid = 0
|
|
|
|
# Configures how OIDs contained in the VALUE of the variable bindings are handled.
|
|
# This only applies to the values for $n, $+n, $-n, $vn, $+*, $-*. For substitutions
|
|
# that include variable NAMES ($+n etc), only the variable VALUE is affected.
|
|
# Set to 0 to disable translating OID values to text (symbolic form)
|
|
# Set to 1 to translate OID values to short text (symbolic form) (eg: BuildingAlarm)
|
|
# Set to 2 to translate OID values to short text with module name (eg: UPS-MIB::BuildingAlarm)
|
|
# Set to 3 to translate OID values to long text (eg: iso...upsAlarm.BuildingAlarm)
|
|
# Set to 4 to translate OID values to long text with module name (eg:
|
|
# UPS-MIB::iso...upsAlarm.BuildingAlarm)
|
|
# For example, if the value contained: 'A UPS Alarm (.1.3.6.1.4.1.534.1.7.12) has cleared.',
|
|
# it could be translated to: 'A UPS Alarm (UPS-MIB::BuildingAlarm) has cleared.'
|
|
# Note: net_snmp_perl_enable *must* be enabled
|
|
translate_value_oids = 1
|
|
|
|
# Configures how the symbolic enterprise OID will be displayed for $E.
|
|
# Set to 1, 2, 3 or 4. See translate_value_oids options 1,2,3 and 4.
|
|
# Note: net_snmp_perl_enable *must* be enabled
|
|
translate_enterprise_oid_format = 1
|
|
|
|
# Configures how the symbolic trap OID will be displayed for $O.
|
|
# Set to 1, 2, 3 or 4. See translate_value_oids options 1,2,3 and 4.
|
|
# Note: net_snmp_perl_enable *must* be enabled
|
|
translate_trap_oid_format = 1
|
|
|
|
# Configures how the symbolic trap OID will be displayed for $v, $-n, $+n, $-* and $+*.
|
|
# Set to 1, 2, 3 or 4. See translate_value_oids options 1,2,3 and 4.
|
|
# Note: net_snmp_perl_enable *must* be enabled
|
|
translate_varname_oid_format = 1
|
|
|
|
# Set to 0 to disable converting INTEGER values to enumeration tags as defined in the
|
|
# MIB files
|
|
# Set to 1 to enable converting INTEGER values to enumeration tags as defined in the
|
|
# MIB files
|
|
# Example: moverDoorState:open instead of moverDoorState:2
|
|
# Note: net_snmp_perl_enable *must* be enabled
|
|
translate_integers = 1
|
|
|
|
# Allows you to set the MIBS environment variable used by SNMPTT
|
|
# Leave blank or comment out to have the systems enviroment settings used
|
|
# To have all MIBS processed, set to ALL
|
|
# See the snmp.conf manual page for more info
|
|
#mibs_environment = ALL
|
|
|
|
# Set what is used to separate variables when wildcards are expanded on the FORMAT /
|
|
# EXEC line. Defaults to a space. Value MUST be within quotes. Can contain 1 or
|
|
# more characters
|
|
wildcard_expansion_separator = " "
|
|
|
|
# Set to 1 to allow unsafe REGEX code to be executed.
|
|
# Set to 0 to prevent unsafe REGEX code from being executed (default).
|
|
# Enabling unsafe REGEX code will allow variable interopolation and the use of the e
|
|
# modifier to allow statements such as substitution with captures such
|
|
# as: (one (two) three)(five $1 six)
|
|
# which outputs: five two six
|
|
# or: (one (two) three)("five ".length($1)." six")e
|
|
# which outputs: five 3 six
|
|
#
|
|
# This is considered unsafe because the contents of the regular expression
|
|
# (right) is executed (eval) by Perl which *could contain unsafe code*.
|
|
# BE SURE THAT THE SNMPTT CONFIGURATION FILES ARE SECURE!
|
|
allow_unsafe_regex = 0
|
|
|
|
# Set to 1 to have the backslash (escape) removed from quotes passed from
|
|
# snmptrapd. For example, \" would be changed to just "
|
|
# Set to 0 to disable
|
|
remove_backslash_from_quotes = 0
|
|
|
|
# Set to 1 to have NODES files loaded each time a trap is processed.
|
|
# Set to 0 to have all NODES files loaded when the snmptt.conf files are loaded.
|
|
# If NODES files are used (files that contain lists of NODES), then setting to 1
|
|
# will cause the list to be loaded each time an EVENT is processed that uses
|
|
# NODES files. This will allow the NODES file to be modified while SNMPTT is
|
|
# running but can result in many file reads depending on the number of traps
|
|
# received. Defaults to 0
|
|
dynamic_nodes = 0
|
|
|
|
# This option allows you to use the $D substitution variable to include the
|
|
# description text from the SNMPTT.CONF or MIB files.
|
|
# Set to 0 to disable the $D substitution variable. If $D is used, nothing
|
|
# will be outputted.
|
|
# Set to 1 to enable the $D substitution variable and have it use the
|
|
# descriptions stored in the SNMPTT .conf files. Enabling this option can
|
|
# greatly increase the amount of memory used by SNMPTT.
|
|
# Set to 2 to enable the $D substitution variable and have it use the
|
|
# description from the MIB files. This enables the UCD-SNMP / NET-SNMP Perl
|
|
# module save_descriptions variable. Enabling this option can greatly
|
|
# increase the amount of memory used by the Net-SNMP SNMP Perl module, which
|
|
# will result in an increase of memory usage by SNMPTT.
|
|
description_mode = 0
|
|
|
|
# Set to 1 to remove any white space at the start of each line from the MIB
|
|
# or SNMPTT.CONF description when description_mode is set to 1 or 2.
|
|
description_clean = 1
|
|
|
|
# Warning: Experimental. Not recommended for production environments.
|
|
# When threads are enabled, SNMPTT may quit unexpectedly.
|
|
# Set to 1 to enable threads (ithreads) in Perl 5.6.0 or higher. If enabled,
|
|
# EXEC will launch in a thread to allow SNMPTT to continue processing other
|
|
# traps. See also threads_max.
|
|
# Set to 0 to disable threads (ithreads).
|
|
# Defaults to 0
|
|
threads_enable = 0
|
|
|
|
# Warning: Experimental. Not recommended for production environments.
|
|
# When threads are enabled, SNMPTT may quit unexpectedly.
|
|
# This option allows you to set the maximum number of threads that will
|
|
# execute at once. Defaults to 10
|
|
threads_max = 10
|
|
|
|
# The date format for $x in strftime() format. If not defined, defaults
|
|
# to %a %b %e %Y.
|
|
#date_format = %a %b %e %Y
|
|
|
|
# The time format for $X in strftime() format. If not defined, defaults
|
|
# to %H:%M:%S.
|
|
#time_format = %H:%M:%S
|
|
|
|
# The date time format in strftime() format for the date/time when logging
|
|
# to standard output, snmptt log files (log_file) and the unknown log file
|
|
# (unknown_trap_log_file). Defaults to localtime(). For SQL, see
|
|
# date_time_format_sql.
|
|
# Example: %a %b %e %Y %H:%M:%S
|
|
date_time_format = %H:%M:%S %Y/%m/%d
|
|
|
|
[DaemonMode]
|
|
# Set to 1 to have snmptt fork to the background when run in daemon mode
|
|
# Ignored by Windows. See documentation
|
|
daemon_fork = 1
|
|
|
|
# Set to the numerical user id (eg: 500) or textual user id (eg: snmptt)
|
|
# that snmptt should change to when running in daemon mode. Leave blank
|
|
# to disable. The user used should have read/write access to all log
|
|
# files, the spool folder, and read access to the configuration files.
|
|
# Only use this if you are starting snmptt as root.
|
|
# A second (child) process will be started as the daemon_uid user so
|
|
# there will be two snmptt processes running. The first process will
|
|
# continue to run as the user that ran snmptt (root), waiting for the
|
|
# child to quit. After the child quits, the parent process will remove
|
|
# the snmptt.pid file and exit.
|
|
daemon_uid = snmptt
|
|
|
|
# Complete path of file to store process ID when running in daemon mode.
|
|
pid_file = /var/run/snmptt.pid
|
|
|
|
# Directory to read received traps from. Ex: /var/spool/snmptt/
|
|
# Don't forget the trailing slash!
|
|
spool_directory = /var/spool/snmptt/
|
|
|
|
# Amount of time in seconds to sleep between processing spool files
|
|
sleep = 5
|
|
|
|
# Set to 1 to have SNMPTT use the time that the trap was processed by SNMPTTHANDLER
|
|
# Set to 0 to have SNMPTT use the time the trap was processed. Note: Using 0 can
|
|
# result in the time being off by the number of seconds used for 'sleep'
|
|
use_trap_time = 1
|
|
|
|
# Set to 0 to have SNMPTT erase the spooled trap file after it attempts to process
|
|
# the trap even if it did not successfully log the trap to any of the log systems.
|
|
# Set to 1 to have SNMPTT erase the spooled trap file only after it successfully
|
|
# logs to at least ONE log system.
|
|
# Set to 2 to have SNMPTT erase the spooled trap file only after it successfully
|
|
# logs to ALL of the enabled log systems. Warning: If multiple log systems are
|
|
# enabled and only one fails, the other log system will continuously be logged to
|
|
# until ALL of the log systems function.
|
|
# The recommended setting is 1 with only one log system enabled.
|
|
keep_unlogged_traps = 1
|
|
|
|
# How often duplicate traps will be processed. An MD5 hash of all incoming traps
|
|
# is stored in memory and is used to check for duplicates. All variables except for
|
|
# the uptime variable are used when calculating the MD5. The larger this variable,
|
|
# the more memory snmptt will require.
|
|
# Note: In most cases it may be a good idea to enable this but sometimes it can have a
|
|
# negative effect. For example, if you are trying to troubleshoot a wireless device
|
|
# that keeps losing it's connection you may want to disable this so that you see
|
|
# all the associations and disassociations.
|
|
# 5 minutes = 300
|
|
# 10 minutes = 600
|
|
# 15 minutes = 900
|
|
duplicate_trap_window = 0
|
|
|
|
[Logging]
|
|
# Set to 1 to enable messages to be sent to standard output, or 0 to disable.
|
|
# Would normally be disabled unless you are piping this program to another
|
|
stdout_enable = 0
|
|
|
|
# Set to 1 to enable text logging of *TRAPS*. Make sure you specify a log_file
|
|
# location
|
|
log_enable = 1
|
|
|
|
# Log file location. The COMPLETE path and filename. Ex: '/var/log/snmptt/snmptt.log'
|
|
log_file = /var/log/snmptt/snmptt.log
|
|
|
|
# Set to 1 to enable text logging of *SNMPTT system errors*. Make sure you
|
|
# specify a log_system_file location
|
|
log_system_enable = 1
|
|
|
|
# Log file location. The COMPLETE path and filename.
|
|
# Ex: '/var/log/snmptt/snmpttsystem.log'
|
|
log_system_file = /var/log/snmptt/snmpttsystem.log
|
|
|
|
# Set to 1 to enable logging of unknown traps. This should normally be left off
|
|
# as the file could grow large quickly. Used primarily for troubleshooting. If
|
|
# you have defined a trap in snmptt.conf, but it is not executing, enable this to
|
|
# see if it is being considered an unknown trap due to an incorrect entry or
|
|
# simply missing from the snmptt.conf file.
|
|
# Unknown traps can be logged either a text file, a SQL table or both.
|
|
# See SQL section to define a SQL table to log unknown traps to.
|
|
unknown_trap_log_enable = 0
|
|
|
|
# Unknown trap log file location. The COMPLETE path and filename.
|
|
# Ex: '/var/log/snmptt/snmpttunknown.log'
|
|
# Leave blank to disable logging to text file if logging to SQL is enabled
|
|
# for unknown traps
|
|
unknown_trap_log_file = /var/log/snmptt/snmpttunknown.log
|
|
|
|
# How often in seconds statistics should be logged to syslog or the event log.
|
|
# Set to 0 to disable
|
|
# 1 hour = 216000
|
|
# 12 hours = 2592000
|
|
# 24 hours = 5184000
|
|
statistics_interval = 0
|
|
|
|
# Set to 1 to enable logging of *TRAPS* to syslog. If you do not have the Sys::Syslog
|
|
# module then disable this. Windows users should disable this.
|
|
syslog_enable = 1
|
|
|
|
# Syslog facility to use for logging of *TRAPS*. For example: 'local0'
|
|
syslog_facility = local0
|
|
|
|
# Set the syslog level for *TRAPS* based on the severity level of the trap
|
|
# as defined in the snmptt.conf file. Values must be one per line between
|
|
# the syslog_level_* and END lines, and are not case sensitive. For example:
|
|
# Warning
|
|
# Critical
|
|
# Duplicate definitions will use the definition with the higher severity.
|
|
syslog_level_debug = <<END
|
|
END
|
|
syslog_level_info = <<END
|
|
END
|
|
syslog_level_notice = <<END
|
|
END
|
|
syslog_level_warning = <<END
|
|
END
|
|
syslog_level_err = <<END
|
|
END
|
|
syslog_level_crit = <<END
|
|
END
|
|
syslog_level_alert = <<END
|
|
END
|
|
|
|
# Syslog default level to use for logging of *TRAPS*. For example: warning
|
|
# Valid values: emerg, alert, crit, err, warning, notice, info, debug
|
|
syslog_level = warning
|
|
|
|
# Set to 1 to enable logging of *SNMPTT system errors* to syslog. If you do not have the
|
|
# Sys::Syslog module then disable this. Windows users should disable this.
|
|
syslog_system_enable = 1
|
|
|
|
# Syslog facility to use for logging of *SNMPTT system errors*. For example: 'local0'
|
|
syslog_system_facility = local0
|
|
|
|
# Syslog level to use for logging of *SNMPTT system errors*.. For example: 'warning'
|
|
# Valid values: emerg, alert, crit, err, warning, notice, info, debug
|
|
syslog_system_level = warning
|
|
|
|
[SQL]
|
|
# Determines if the enterprise column contains the numeric OID or symbolic OID
|
|
# Set to 0 for numeric OID
|
|
# Set to 1 for symbolic OID
|
|
# Uses translate_enterprise_oid_format to determine format
|
|
# Note: net_snmp_perl_enable *must* be enabled
|
|
db_translate_enterprise = 0
|
|
|
|
# FORMAT line to use for unknown traps. If not defined, defaults to $-*.
|
|
db_unknown_trap_format = '$-*'
|
|
|
|
# List of custom SQL column names and values for the table of received traps
|
|
# (defined by *_table below). The format is
|
|
# column name
|
|
# value
|
|
#
|
|
# For example:
|
|
#
|
|
# binding_count
|
|
# $#
|
|
# uptime2
|
|
# The agent has been up for $T.
|
|
sql_custom_columns = <<END
|
|
END
|
|
|
|
# List of custom SQL column names and values for the table of unknown traps
|
|
# (defined by *_table_unknown below). See sql_custom_columns for the format.
|
|
sql_custom_columns_unknown = <<END
|
|
END
|
|
|
|
# MySQL: Set to 1 to enable logging to a MySQL database via DBI (Linux / Windows)
|
|
# This requires DBI:: and DBD::mysql
|
|
mysql_dbi_enable = 0
|
|
|
|
# MySQL: Hostname of database server (optional - default localhost)
|
|
mysql_dbi_host = localhost
|
|
|
|
# MySQL: Port number of database server (optional - default 3306)
|
|
mysql_dbi_port = 3306
|
|
|
|
# MySQL: Database to use
|
|
mysql_dbi_database = snmptt
|
|
|
|
# MySQL: Table to use
|
|
mysql_dbi_table = snmptt
|
|
|
|
# MySQL: Table to use for unknown traps
|
|
# Leave blank to disable logging of unknown traps to MySQL
|
|
# Note: unknown_trap_log_enable must be enabled.
|
|
mysql_dbi_table_unknown = snmptt_unknown
|
|
|
|
# MySQL: Table to use for statistics
|
|
# Note: statistics_interval must be set. See also stat_time_format_sql.
|
|
#mysql_dbi_table_statistics = snmptt_statistics
|
|
mysql_dbi_table_statistics =
|
|
|
|
# MySQL: Username to use
|
|
mysql_dbi_username = snmpttuser
|
|
|
|
# MySQL: Password to use
|
|
mysql_dbi_password = password
|
|
|
|
# MySQL: Whether or not to 'ping' the database before attempting an INSERT
|
|
# to ensure the connection is still valid. If *any* error is generate by
|
|
# the ping such as 'Unable to connect to database', it will attempt to
|
|
# re-create the database connection.
|
|
# Set to 0 to disable
|
|
# Set to 1 to enable
|
|
# Note: This has no effect on mysql_ping_interval.
|
|
mysql_ping_on_insert = 1
|
|
|
|
# MySQL: How often in seconds the database should be 'pinged' to ensure the
|
|
# connection is still valid. If *any* error is generate by the ping such as
|
|
# 'Unable to connect to database', it will attempt to re-create the database
|
|
# connection. Set to 0 to disable pinging.
|
|
# Note: This has no effect on mysql_ping_on_insert.
|
|
# disabled = 0
|
|
# 5 minutes = 300
|
|
# 15 minutes = 900
|
|
# 30 minutes = 1800
|
|
mysql_ping_interval = 300
|
|
|
|
# PostgreSQL: Set to 1 to enable logging to a PostgreSQL database via DBI (Linux / Windows)
|
|
# This requires DBI:: and DBD::PgPP
|
|
postgresql_dbi_enable = 0
|
|
|
|
# Set to 0 to use the DBD::PgPP module
|
|
# Set to 1 to use the DBD::Pg module
|
|
postgresql_dbi_module = 0
|
|
|
|
# Set to 0 to disable host and port network support
|
|
# Set to 1 to enable host and port network support
|
|
# If set to 1, ensure PostgreSQL is configured to allow connections via TCPIP by setting
|
|
# tcpip_socket = true in the $PGDATA/postgresql.conf file, and adding the ip address of
|
|
# the SNMPTT server to $PGDATApg_hba.conf. The common location for the config files for
|
|
# RPM installations of PostgreSQL is /var/lib/pgsql/data.
|
|
postgresql_dbi_hostport_enable = 0
|
|
|
|
# PostgreSQL: Hostname of database server (optional - default localhost)
|
|
postgresql_dbi_host = localhost
|
|
|
|
# PostgreSQL: Port number of database server (optional - default 5432)
|
|
postgresql_dbi_port = 5432
|
|
|
|
# PostgreSQL: Database to use
|
|
postgresql_dbi_database = snmptt
|
|
|
|
# PostgreSQL: Table to use for unknown traps
|
|
# Leave blank to disable logging of unknown traps to PostgreSQL
|
|
# Note: unknown_trap_log_enable must be enabled.
|
|
postgresql_dbi_table_unknown = snmptt_unknown
|
|
|
|
# PostgreSQL: Table to use for statistics
|
|
# Note: statistics_interval must be set. See also stat_time_format_sql.
|
|
#postgresql_dbi_table_statistics = snmptt_statistics
|
|
postgresql_dbi_table_statistics =
|
|
|
|
# PostgreSQL: Table to use
|
|
postgresql_dbi_table = snmptt
|
|
|
|
# PostgreSQL: Username to use
|
|
postgresql_dbi_username = snmpttuser
|
|
|
|
# PostgreSQL: Password to use
|
|
postgresql_dbi_password = password
|
|
|
|
# PostgreSQL: Whether or not to 'ping' the database before attempting an INSERT
|
|
# to ensure the connection is still valid. If *any* error is generate by
|
|
# the ping such as 'Unable to connect to database', it will attempt to
|
|
# re-create the database connection.
|
|
# Set to 0 to disable
|
|
# Set to 1 to enable
|
|
# Note: This has no effect on postgresqll_ping_interval.
|
|
postgresql_ping_on_insert = 1
|
|
|
|
# PostgreSQL: How often in seconds the database should be 'pinged' to ensure the
|
|
# connection is still valid. If *any* error is generate by the ping such as
|
|
# 'Unable to connect to database', it will attempt to re-create the database
|
|
# connection. Set to 0 to disable pinging.
|
|
# Note: This has no effect on postgresql_ping_on_insert.
|
|
# disabled = 0
|
|
# 5 minutes = 300
|
|
# 15 minutes = 900
|
|
# 30 minutes = 1800
|
|
postgresql_ping_interval = 300
|
|
|
|
# ODBC: Set to 1 to enable logging to a database via ODBC using DBD::ODBC.
|
|
# This requires both DBI:: and DBD::ODBC
|
|
dbd_odbc_enable = 0
|
|
|
|
# DBD:ODBC: Database to use
|
|
dbd_odbc_dsn = snmptt
|
|
|
|
# DBD:ODBC: Table to use
|
|
dbd_odbc_table = snmptt
|
|
|
|
# DBD:ODBC: Table to use for unknown traps
|
|
# Leave blank to disable logging of unknown traps to DBD:ODBC
|
|
# Note: unknown_trap_log_enable must be enabled.
|
|
dbd_odbc_table_unknown = snmptt_unknown
|
|
|
|
# DBD:ODBC: Table to use for statistics
|
|
# Note: statistics_interval must be set. See also stat_time_format_sql.
|
|
#dbd_odbc_table_statistics = snmptt_statistics
|
|
dbd_odbc_table_statistics =
|
|
|
|
# DBD:ODBC: Username to use
|
|
dbd_odbc_username = snmptt
|
|
|
|
# DBD:DBC:: Password to use
|
|
dbd_odbc_password = password
|
|
|
|
|
|
# DBD:ODBC: Whether or not to 'ping' the database before attempting an INSERT
|
|
# to ensure the connection is still valid. If *any* error is generate by
|
|
# the ping such as 'Unable to connect to database', it will attempt to
|
|
# re-create the database connection.
|
|
# Set to 0 to disable
|
|
# Set to 1 to enable
|
|
# Note: This has no effect on dbd_odbc_ping_interval.
|
|
dbd_odbc_ping_on_insert = 1
|
|
|
|
# DBD:ODBC:: How often in seconds the database should be 'pinged' to ensure the
|
|
# connection is still valid. If *any* error is generate by the ping such as
|
|
# 'Unable to connect to database', it will attempt to re-create the database
|
|
# connection. Set to 0 to disable pinging.
|
|
# Note: This has no effect on dbd_odbc_ping_on_insert.
|
|
# disabled = 0
|
|
# 5 minutes = 300
|
|
# 15 minutes = 900
|
|
# 30 minutes = 1800
|
|
dbd_odbc_ping_interval = 300
|
|
|
|
# The date time format for the traptime column in SQL. Defaults to
|
|
# localtime(). When a date/time field is used in SQL, this should
|
|
# be changed to follow a standard that is supported by the SQL server.
|
|
# Example: For a MySQL DATETIME, use %Y-%m-%d %H:%M:%S.
|
|
#date_time_format_sql =
|
|
|
|
# The date time format for the stat_time column in SQL. Defaults to
|
|
# localtime(). When a date/time field is used in SQL, this should
|
|
# be changed to follow a standard that is supported by the SQL server.
|
|
# Example: For a MySQL DATETIME, use %Y-%m-%d %H:%M:%S.
|
|
#stat_time_format_sql =
|
|
|
|
[Exec]
|
|
|
|
# Set to 1 to allow EXEC statements to execute. Should normally be left on unless you
|
|
# want to temporarily disable all EXEC commands
|
|
exec_enable = 1
|
|
|
|
# Set to 1 to allow PREEXEC statements to execute. Should normally be left on unless you
|
|
# want to temporarily disable all PREEXEC commands
|
|
pre_exec_enable = 1
|
|
|
|
# If defined, the following command will be executed for ALL unknown traps. Passed to the
|
|
# command will be all standard and enterprise variables, similar to unknown_trap_log_file
|
|
# but without the newlines.
|
|
unknown_trap_exec =
|
|
|
|
# FORMAT line that is passed to the unknown_trap_exec command. If not defined, it
|
|
# defaults to what is described in the unknown_trap_exec setting. The following
|
|
# would be *similar* to the default described in the unknown_trap_exec setting
|
|
# (all on one line):
|
|
# $x !! $X: Unknown trap ($o) received from $A at: Value 0: $A Value 1: $aR
|
|
# Value 2: $T Value 3: $o Value 4: $aA Value 5: $C Value 6: $e Ent Values: $+*
|
|
unknown_trap_exec_format =
|
|
|
|
# Set to 1 to escape wildards (* and ?) in EXEC, PREEXEC and the unknown_trap_exec
|
|
# commands. Enable this to prevent the shell from expanding the wildcard
|
|
# characters. The default is 1.
|
|
exec_escape = 1
|
|
|
|
[Debugging]
|
|
# 0 - do not output messages
|
|
# 1 - output some basic messages
|
|
# 2 - out all messages
|
|
DEBUGGING = 0
|
|
|
|
# Debugging file - SNMPTT
|
|
# Location of debugging output file. Leave blank to default to STDOUT (good for
|
|
# standalone mode, or daemon mode without forking)
|
|
DEBUGGING_FILE =
|
|
# DEBUGGING_FILE = /var/log/snmptt/snmptt.debug
|
|
|
|
# Debugging file - SNMPTTHANDLER
|
|
# Location of debugging output file. Leave blank to default to STDOUT
|
|
DEBUGGING_FILE_HANDLER =
|
|
# DEBUGGING_FILE_HANDLER = /var/log/snmptt/snmptthandler.debug
|
|
|
|
[TrapFiles]
|
|
# A list of snmptt.conf files (this is NOT the snmptrapd.conf file). The COMPLETE path
|
|
# and filename. Ex: '/etc/snmp/snmptt.conf'
|
|
snmptt_conf_files = <<END
|
|
/etc/snmp/snmptt.conf
|
|
END
|
|
|