Update the neutron-classifier repo

This is essentially a maintenance patch to make the neutron-classifier
repo pass the gate again, and add a few bits and pieces before the
Common Classification Framework starts to be applied.

Change-Id: I6f075363aeb06820c3ba3262454c5820b1c16bef

.coveragerc

@@ -1,7 +1,7 @@
 [run]
 branch = True
-source = neutron-classifier
-omit = neutron-classifier/openstack/*
+source = neutron_classifier
+omit = neutron_classifier/tests/*
 
 [report]
 ignore_errors = True

.gitignore

@@ -52,3 +52,6 @@ ChangeLog
 *~
 .*.swp
 .*sw?
+
+# Reno
+releasenotes/build

.mailmap

@@ -1,3 +0,0 @@
-# Format is:
-# <preferred e-mail> <other e-mail 1>
-# <preferred e-mail> <other e-mail 2>

.pylintrc

@@ -0,0 +1,390 @@
+[MASTER]
+
+# Specify a configuration file.
+#rcfile=
+
+# Python code to execute, usually for sys.path manipulation such as
+# pygtk.require().
+#init-hook=
+
+# Profiled execution.
+profile=no
+
+# Add files or directories to the blacklist. They should be base names, not
+# paths.
+ignore=CVS
+
+# Pickle collected data for later comparisons.
+persistent=yes
+
+# List of plugins (as comma separated values of python modules names) to load,
+# usually to register additional checkers.
+load-plugins=
+
+# Deprecated. It was used to include message's id in output. Use --msg-template
+# instead.
+include-ids=no
+
+# Deprecated. It was used to include symbolic ids of messages in output. Use
+# --msg-template instead.
+symbols=no
+
+# Use multiple processes to speed up Pylint.
+jobs=1
+
+# Allow loading of arbitrary C extensions. Extensions are imported into the
+# active Python interpreter and may run arbitrary code.
+unsafe-load-any-extension=no
+
+# A comma-separated list of package or module names from where C extensions may
+# be loaded. Extensions are loading into the active Python interpreter and may
+# run arbitrary code
+extension-pkg-whitelist=
+
+# Allow optimization of some AST trees. This will activate a peephole AST
+# optimizer, which will apply various small optimizations. For instance, it can
+# be used to obtain the result of joining multiple strings with the addition
+# operator. Joining a lot of strings can lead to a maximum recursion error in
+# Pylint and this flag can prevent that. It has one side effect, the resulting
+# AST will be different than the one from reality.
+optimize-ast=no
+
+
+[MESSAGES CONTROL]
+
+# Only show warnings with the listed confidence levels. Leave empty to show
+# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED
+confidence=
+
+# Enable the message, report, category or checker with the given id(s). You can
+# either give multiple identifier separated by comma (,) or put this option
+# multiple time. See also the "--disable" option for examples.
+#enable=
+
+# Disable the message, report, category or checker with the given id(s). You
+# can either give multiple identifiers separated by comma (,) or put this
+# option multiple times (only on the command line, not in the configuration
+# file where it should appear only once).You can also use "--disable=all" to
+# disable everything first and then reenable specific checks. For example, if
+# you want to run only the similarities checker, you can use "--disable=all
+# --enable=similarities". If you want to run only the classes checker, but have
+# no Warning level messages displayed, use"--disable=all --enable=classes
+# --disable=W"
+disable=E1608,W1627,E1601,E1603,E1602,E1605,E1604,E1607,E1606,W1621,W1620,W1623,W1622,W1625,W1624,W1609,W1608,W1607,W1606,W1605,W1604,W1603,W1602,W1601,W1639,W1640,I0021,W1638,I0020,W1618,W1619,W1630,W1626,W1637,W1634,W1635,W1610,W1611,W1612,W1613,W1614,W1615,W1616,W1617,W1632,W1633,W0704,W1628,W1629,W1636,C0111
+
+
+[REPORTS]
+
+# Set the output format. Available formats are text, parseable, colorized, msvs
+# (visual studio) and html. You can also give a reporter class, eg
+# mypackage.mymodule.MyReporterClass.
+output-format=text
+
+# Put messages in a separate file for each module / package specified on the
+# command line instead of printing them on stdout. Reports (if any) will be
+# written in a file name "pylint_global.[txt|html]".
+files-output=no
+
+# Tells whether to display a full report or only the messages
+reports=yes
+
+# Python expression which should return a note less than 10 (10 is the highest
+# note). You have access to the variables errors warning, statement which
+# respectively contain the number of errors / warnings messages and the total
+# number of statements analyzed. This is used by the global evaluation report
+# (RP0004).
+evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)
+
+# Add a comment according to your evaluation note. This is used by the global
+# evaluation report (RP0004).
+comment=no
+
+# Template used to display messages. This is a python new-style format string
+# used to format the message information. See doc for all details
+#msg-template=
+
+
+[SIMILARITIES]
+
+# Minimum lines number of a similarity.
+min-similarity-lines=4
+
+# Ignore comments when computing similarities.
+ignore-comments=yes
+
+# Ignore docstrings when computing similarities.
+ignore-docstrings=yes
+
+# Ignore imports when computing similarities.
+ignore-imports=no
+
+
+[TYPECHECK]
+
+# Tells whether missing members accessed in mixin class should be ignored. A
+# mixin class is detected if its name ends with "mixin" (case insensitive).
+ignore-mixin-members=yes
+
+# List of module names for which member attributes should not be checked
+# (useful for modules/projects where namespaces are manipulated during runtime
+# and thus existing member attributes cannot be deduced by static analysis
+ignored-modules=
+
+# List of classes names for which member attributes should not be checked
+# (useful for classes with attributes dynamically set).
+ignored-classes=SQLObject
+
+# When zope mode is activated, add a predefined set of Zope acquired attributes
+# to generated-members.
+zope=no
+
+# List of members which are set dynamically and missed by pylint inference
+# system, and so shouldn't trigger E0201 when accessed. Python regular
+# expressions are accepted.
+generated-members=REQUEST,acl_users,aq_parent
+
+
+[SPELLING]
+
+# Spelling dictionary name. Available dictionaries: none. To make it working
+# install python-enchant package.
+spelling-dict=
+
+# List of comma separated words that should not be checked.
+spelling-ignore-words=
+
+# A path to a file that contains private dictionary; one word per line.
+spelling-private-dict-file=
+
+# Tells whether to store unknown words to indicated private dictionary in
+# --spelling-private-dict-file option instead of raising a message.
+spelling-store-unknown-words=no
+
+
+[LOGGING]
+
+# Logging modules to check that the string format arguments are in logging
+# function parameter format
+logging-modules=logging
+
+
+[VARIABLES]
+
+# Tells whether we should check for unused import in __init__ files.
+init-import=no
+
+# A regular expression matching the name of dummy variables (i.e. expectedly
+# not used).
+dummy-variables-rgx=_$|dummy
+
+# List of additional names supposed to be defined in builtins. Remember that
+# you should avoid to define new builtins when possible.
+additional-builtins=
+
+# List of strings which can identify a callback function by name. A callback
+# name must start or end with one of those strings.
+callbacks=cb_,_cb
+
+
+[MISCELLANEOUS]
+
+# List of note tags to take in consideration, separated by a comma.
+notes=FIXME,XXX,TODO
+
+
+[BASIC]
+
+# Required attributes for module, separated by a comma
+required-attributes=
+
+# List of builtins function names that should not be used, separated by a comma
+bad-functions=map,filter,input
+
+# Good variable names which should always be accepted, separated by a comma
+good-names=i,j,k,ex,Run,_
+
+# Bad variable names which should always be refused, separated by a comma
+bad-names=foo,bar,baz,toto,tutu,tata
+
+# Colon-delimited sets of names that determine each other's naming style when
+# the name regexes allow several styles.
+name-group=
+
+# Include a hint for the correct naming format with invalid-name
+include-naming-hint=no
+
+# Regular expression matching correct function names
+function-rgx=[a-z_][a-z0-9_]{2,30}$
+
+# Naming hint for function names
+function-name-hint=[a-z_][a-z0-9_]{2,30}$
+
+# Regular expression matching correct variable names
+variable-rgx=[a-z_][a-z0-9_]{2,30}$
+
+# Naming hint for variable names
+variable-name-hint=[a-z_][a-z0-9_]{2,30}$
+
+# Regular expression matching correct constant names
+const-rgx=(([A-Z_][A-Z0-9_]*)|(__.*__))$
+
+# Naming hint for constant names
+const-name-hint=(([A-Z_][A-Z0-9_]*)|(__.*__))$
+
+# Regular expression matching correct attribute names
+attr-rgx=[a-z_][a-z0-9_]{2,30}$
+
+# Naming hint for attribute names
+attr-name-hint=[a-z_][a-z0-9_]{2,30}$
+
+# Regular expression matching correct argument names
+argument-rgx=[a-z_][a-z0-9_]{2,30}$
+
+# Naming hint for argument names
+argument-name-hint=[a-z_][a-z0-9_]{2,30}$
+
+# Regular expression matching correct class attribute names
+class-attribute-rgx=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$
+
+# Naming hint for class attribute names
+class-attribute-name-hint=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$
+
+# Regular expression matching correct inline iteration names
+inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$
+
+# Naming hint for inline iteration names
+inlinevar-name-hint=[A-Za-z_][A-Za-z0-9_]*$
+
+# Regular expression matching correct class names
+class-rgx=[A-Z_][a-zA-Z0-9]+$
+
+# Naming hint for class names
+class-name-hint=[A-Z_][a-zA-Z0-9]+$
+
+# Regular expression matching correct module names
+module-rgx=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$
+
+# Naming hint for module names
+module-name-hint=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$
+
+# Regular expression matching correct method names
+method-rgx=[a-z_][a-z0-9_]{2,30}$
+
+# Naming hint for method names
+method-name-hint=[a-z_][a-z0-9_]{2,30}$
+
+# Regular expression which should only match function or class names that do
+# not require a docstring.
+no-docstring-rgx=__.*__
+
+# Minimum line length for functions/classes that require docstrings, shorter
+# ones are exempt.
+docstring-min-length=-1
+
+
+[FORMAT]
+
+# Maximum number of characters on a single line.
+max-line-length=100
+
+# Regexp for a line that is allowed to be longer than the limit.
+ignore-long-lines=^\s*(# )?<?https?://\S+>?$
+
+# Allow the body of an if to be on the same line as the test if there is no
+# else.
+single-line-if-stmt=no
+
+# List of optional constructs for which whitespace checking is disabled
+no-space-check=trailing-comma,dict-separator
+
+# Maximum number of lines in a module
+max-module-lines=1000
+
+# String used as indentation unit. This is usually " " (4 spaces) or "\t" (1
+# tab).
+indent-string='    '
+
+# Number of spaces of indent required inside a hanging or continued line.
+indent-after-paren=4
+
+# Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
+expected-line-ending-format=
+
+
+[DESIGN]
+
+# Maximum number of arguments for function / method
+max-args=5
+
+# Argument names that match this expression will be ignored. Default to name
+# with leading underscore
+ignored-argument-names=_.*
+
+# Maximum number of locals for function / method body
+max-locals=15
+
+# Maximum number of return / yield for function / method body
+max-returns=6
+
+# Maximum number of branch for function / method body
+max-branches=12
+
+# Maximum number of statements in function / method body
+max-statements=50
+
+# Maximum number of parents for a class (see R0901).
+max-parents=7
+
+# Maximum number of attributes for a class (see R0902).
+max-attributes=7
+
+# Minimum number of public methods for a class (see R0903).
+min-public-methods=2
+
+# Maximum number of public methods for a class (see R0904).
+max-public-methods=20
+
+
+[CLASSES]
+
+# List of interface methods to ignore, separated by a comma. This is used for
+# instance to not check methods defines in Zope's Interface base class.
+ignore-iface-methods=isImplementedBy,deferred,extends,names,namesAndDescriptions,queryDescriptionFor,getBases,getDescriptionFor,getDoc,getName,getTaggedValue,getTaggedValueTags,isEqualOrExtendedBy,setTaggedValue,isImplementedByInstancesOf,adaptWith,is_implemented_by
+
+# List of method names used to declare (i.e. assign) instance attributes.
+defining-attr-methods=__init__,__new__,setUp
+
+# List of valid names for the first argument in a class method.
+valid-classmethod-first-arg=cls
+
+# List of valid names for the first argument in a metaclass class method.
+valid-metaclass-classmethod-first-arg=mcs
+
+# List of member names, which should be excluded from the protected access
+# warning.
+exclude-protected=_asdict,_fields,_replace,_source,_make
+
+
+[IMPORTS]
+
+# Deprecated modules which should not be used, separated by a comma
+deprecated-modules=regsub,TERMIOS,Bastion,rexec
+
+# Create a graph of every (i.e. internal and external) dependencies in the
+# given file (report RP0402 must not be disabled)
+import-graph=
+
+# Create a graph of external dependencies in the given file (report RP0402 must
+# not be disabled)
+ext-import-graph=
+
+# Create a graph of internal dependencies in the given file (report RP0402 must
+# not be disabled)
+int-import-graph=
+
+
+[EXCEPTIONS]
+
+# Exceptions that will emit a warning when being caught. Defaults to
+# "Exception"
+overgeneral-exceptions=Exception

.testr.conf

@@ -2,6 +2,6 @@
 test_command=OS_STDOUT_CAPTURE=${OS_STDOUT_CAPTURE:-1} \
              OS_STDERR_CAPTURE=${OS_STDERR_CAPTURE:-1} \
              OS_TEST_TIMEOUT=${OS_TEST_TIMEOUT:-60} \
-             ${PYTHON:-python} -m subunit.run discover -t ./ . $LISTOPT $IDOPTION
+             ${PYTHON:-python} -m subunit.run discover -t ./ ${OS_TEST_PATH:-./neutron_classifier/tests/unit} $LISTOPT $IDOPTION
 test_id_option=--load-list $IDFILE
 test_list_option=--list

babel.cfg

@@ -1,2 +0,0 @@
-[python: **.py]
-

doc/source/conf.py

@@ -22,7 +22,6 @@ sys.path.insert(0, os.path.abspath('../..'))
 # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom ones.
 extensions = [
     'sphinx.ext.autodoc',
-    #'sphinx.ext.intersphinx',
     'oslosphinx'
 ]
 
@@ -70,6 +69,3 @@ latex_documents = [
      u'%s Documentation' % project,
      u'OpenStack Foundation', 'manual'),
 ]
-
-# Example configuration for intersphinx: refer to the Python standard library.
-#intersphinx_mapping = {'http://docs.python.org/': None}

doc/source/index.rst

@@ -1,10 +1,5 @@
-.. neutron-classifier documentation master file, created by
-   sphinx-quickstart on Tue Jul  9 22:26:36 2013.
-   You can adapt this file completely to your liking, but it should at least
-   contain the root `toctree` directive.
-
-Welcome to neutron-classifier's documentation!
-========================================================
+Welcome to the Common Classification Framework's documentation!
+===============================================================
 
 Contents:
 

doc/source/usage.rst

@@ -1,6 +1,6 @@
-========
+=====
 Usage
-========
+=====
 
 To use neutron-classifier in a project::
 

neutron_classifier/__init__.py

@@ -1,4 +1,4 @@
-# -*- coding: utf-8 -*-
+# Copyright 2017 OpenStack Foundation
 
 # Licensed under the Apache License, Version 2.0 (the "License"); you may
 # not use this file except in compliance with the License. You may obtain
@@ -15,5 +15,4 @@
 import pbr.version
 
 
-__version__ = pbr.version.VersionInfo(
-    'neutron-classifier').version_string()
+__version__ = pbr.version.VersionInfo('neutron_classifier').version_string()

neutron_classifier/db/validators.py

@@ -51,8 +51,7 @@ def _validate_sg_ethertype_and_protocol(rule, protocol):
 def validate_port_range(min_port, max_port):
     """Check that port_range is valid."""
     port_range = '%s:%s' % (min_port, max_port)
-    if(min_port is None and
-        max_port is None):
+    if(min_port is None and max_port is None):
         return
     if (int(min_port) <= 0 or int(max_port) <= 0):
         raise exc.InvalidPortRange(port_range=port_range)

neutron_classifier/tests/base.py

@@ -1,5 +1,3 @@
-# -*- coding: utf-8 -*-
-
 # Copyright 2010-2011 OpenStack Foundation
 # Copyright (c) 2013 Hewlett-Packard Development Company, L.P.
 #
@@ -19,5 +17,4 @@ from oslotest import base
 
 
 class TestCase(base.BaseTestCase):
-
-    """Test case base class for all unit tests."""
+    """Test case base class for all tests."""

neutron_classifier/tests/test_neutron_classifier.py

@@ -1,28 +0,0 @@
-# -*- coding: utf-8 -*-
-
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
-
-"""
-test_neutron-classifier
-----------------------------------
-
-Tests for `neutron-classifier` module.
-"""
-
-from neutron_classifier.tests import base
-
-
-class TestNeutron_classifier(base.TestCase):
-
-    def test_something(self):
-        pass

openstack-common.conf

@@ -1,6 +0,0 @@
-[DEFAULT]
-
-# The list of modules to copy from oslo-incubator.git
-
-# The base module to hold the copy of openstack.common
-base=neutron-classifier

requirements.txt

@@ -1,9 +1,5 @@
-# The order of packages is significant, because pip processes them in the order
-# of appearance. Changing the order has an impact on the overall integration
-# process, which may cause wedges in the gate later.
-
-pbr>=1.6
-Babel>=1.3
-sqlalchemy
-neutron-lib>=0.0.1 # Apache-2.0
-oslo.utils>=2.0.0 # Apache-2.0
+pbr>=2.0.0,!=2.1.0  # Apache-2.0
+Babel>=2.3.4,!=2.4.0  # BSD
+SQLAlchemy>=1.0.10,!=1.1.5,!=1.1.6,!=1.1.7,!=1.1.8  # MIT
+neutron-lib>=1.7.0  # Apache-2.0
+oslo.utils>=3.20.0  # Apache-2.0

setup.cfg

@@ -1,6 +1,6 @@
 [metadata]
 name = neutron-classifier
-summary =  Common database model for services that classify packets 
+summary =  Neutron Common Classification Framework
 description-file =
     README.rst
 author = OpenStack

test-requirements.txt

@@ -1,15 +1,10 @@
-# The order of packages is significant, because pip processes them in the order
-# of appearance. Changing the order has an impact on the overall integration
-# process, which may cause wedges in the gate later.
-
-hacking<0.11,>=0.10.0
-
-coverage>=3.6
-discover
-python-subunit>=0.0.18
-sphinx!=1.2.0,!=1.3b1,<1.3,>=1.1.2
-oslosphinx>=2.5.0 # Apache-2.0
-oslotest>=1.10.0 # Apache-2.0
-testrepository>=0.0.18
-testscenarios>=0.4
-testtools>=1.4.0
+hacking!=0.13.0,<0.14,>=0.12.0 # Apache-2.0
+coverage!=4.4,>=4.0  # Apache-2.0
+python-subunit>=0.0.18  # Apache-2.0/BSD
+sphinx>=1.6.2  # BSD
+oslosphinx>=4.7.0  # Apache-2.0
+oslotest>=1.10.0  # Apache-2.0
+testrepository>=0.0.18  # Apache-2.0/BSD
+testscenarios>=0.4  # Apache-2.0/BSD
+testtools>=1.4.0  # MIT
+pylint==1.4.5  # GPLv2

tox.ini

@@ -1,6 +1,6 @@
 [tox]
 minversion = 1.6
-envlist = py34,py27,pypy,pep8
+envlist = py35,py27,pep8
 skipsdist = True
 
 [testenv]
@@ -10,10 +10,16 @@ setenv =
    VIRTUAL_ENV={envdir}
    PYTHONWARNINGS=default::DeprecationWarning
 deps = -r{toxinidir}/test-requirements.txt
-commands = python setup.py test --slowest --testr-args='{posargs}'
+whitelist_externals = rm
+commands =
+    rm -f .testrepository/times.dbm
+    python setup.py test --slowest --testr-args='{posargs}'
 
 [testenv:pep8]
-commands = flake8
+commands =
+    flake8
+# TODO(igordcard): enable pylint on a future patch
+#    pylint --rcfile=.pylintrc --output-format=colorized {posargs:neutron_classifier}
 
 [testenv:venv]
 commands = {posargs}
@@ -28,9 +34,7 @@ commands = python setup.py build_sphinx
 commands = oslo_debug_helper {posargs}
 
 [flake8]
-# E123, E125 skipped as they are invalid PEP-8.
-
 show-source = True
-ignore = E123,E125
+#ignore =
 builtins = _
-exclude=.venv,.git,.tox,dist,doc,*openstack/common*,*lib/python*,*egg,build
+exclude = ./.*,build,dist