fe2f9c2950
Right now, retries break in ilo driver due to server_side_retries being an accepted kwarg in sushy.connector.Connector._op, but not this version. We should accept any set of args, but only pass on known-good args, as sushy.connector.Connector._op() will pass on any unknown kwargs to requests, which means we should not blindly pass on all kwargs. Additionally, fixed related unit tests and some basic configuration fixes to get linting to pass. Change-Id: I80796cc4280a194735e6e4034d37cca4fdc97f97 |
||
---|---|---|
doc | ||
proliantutils | ||
.gitignore | ||
.gitreview | ||
.stestr.conf | ||
.zuul.yaml | ||
LICENSE | ||
README.md | ||
README.rst | ||
requirements.txt | ||
setup.cfg | ||
setup.py | ||
test-requirements.txt | ||
tox.ini |
Proliantutils documentation
Introduction
Proliantutils is a set of python utility libraries for interfacing and managing various components (like iLO, HPSSA) for HPE iLO-based Servers. This library uses Redfish to interact with Gen10 servers and RIBCL/RIS to interact with Gen8 and Gen9 servers. A subset of proliantutils can be used to discover server properties (aka Discovery Engine).
Please use launchpad to report bugs and ask questions.
Installation
Install the module from PyPI. If you are using Ironic, install the module on Ironic conductor node:
$ pip install proliantutils
Some GNU/Linux distributions provide python-proliantutils package.
Supported Operations
Creating an IloClient object for interfacing with the iLO, use IloClient object:
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_host_power_status()
'OFF'
For operations supported on the client object, please refer proliantutils.ilo.operations.
get_all_licenses()
Retrieves license type, key, installation date, etc.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_all_licenses()
{'LICENSE_TIER': 'ADV', 'LICENSE_INSTALL_DATE': '10 May 2019',
'LICENSE_CLASS': 'FQL', 'LICENSE_TYPE': 'iLO Advanced',
'LICENSE_KEY': 'YOUR_LICENSE_KEY', 'LICENSE_STATE': 'unconfirmed'}
get_product_name()
Retrieves the model name of the queried server.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_product_name()
u'ProLiant DL360 Gen10'
get_host_power_status()
Retrieves the power status of the server.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_host_power_status()
'ON'
get_http_boot_url()
Retrieves the http boot url.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_http_boot_url()
u'http://10.10.1.30:8081/startup.nsh'
set_http_boot_url(url)
Set the url to the UefiShellStartupUrl. Takes url for http boot as argument.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.set_http_boot_url("http://10.10.1.30:8081/startup.nsh")
set_iscsi_info(target_name, lun, ip_address, port='3260', auth_method=None, username=None, password=None, macs=[])
Sets iscsi details of the system in uefi boot mode.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.set_iscsi_info('iqn.2011-07.com:example:123', '1', '10.10.1.23', '3260', 'CHAP', 'user', 'password')
unset_iscsi_info(macs=[])
Disable iscsi boot option of the system in uefi boot mode. Takes a list of target MAC addresses as argument.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.unset_iscsi_info(['98:f2:b3:ee:f4:00'])
get_iscsi_initiator_info()
Retrieves iSCSI initiator information of iLO.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_iscsi_initiator_info()
'iqn.2015-02.com.hpe:uefi-U32-G393NR9113'
set_iscsi_initiator_info(initiator_iqn)
Sets iSCSI initiator information of iLO. Takes an initiator iqn for iLO as argument.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.set_iscsi_initiator_info('iqn.2015-02.com.hpe:uefi-U32-G393NR9113')
get_one_time_boot()
Retrieves the current setting for the one time boot.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_one_time_boot()
'Normal'
get_vm_status(device='FLOPPY')
Retrieves the virtual media drive status like url, is connected, etc. Takes virtual media device as argument.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_vm_status('FLOPPY')
{'WRITE_PROTECT': 'NO', 'VM_APPLET': 'DISCONNECTED', 'IMAGE_URL':
u'', 'BOOT_OPTION': 'NO_BOOT', 'DEVICE': 'FLOPPY', 'IMAGE_INSERTED':
'NO'}
reset_server()
Resets the server.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.reset_server()
press_pwr_btn()
Simulates a physical press of the server power button.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_host_power_status()
u'ON'
>>> ilo_client.press_pwr_btn()
>>> ilo_client.get_host_power_status()
u'OFF'
hold_pwr_btn()
Simulate a physical press and hold of the server power button.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_host_power_status()
u'ON'
>>> ilo_client.hold_pwr_btn()
>>> ilo_client.get_host_power_status()
u'OFF'
set_host_power(power)
Toggles the power button of the server. Takes power status as argument. The power status values can be ‘ON’ or ‘OFF’.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.set_host_power('ON')
>>> ilo_client.get_host_power_status()
u'ON'
>>> ilo_client.set_host_power('OFF')
>>> ilo_client.get_host_power_status()
u'OFF'
set_one_time_boot(value)
Configures the server for a single boot from a specific device. Takes a boot device value as argument.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_one_time_boot()
'Normal'
>>> ilo_client.set_one_time_boot('CDROM')
>>> ilo_client.get_one_time_boot()
'CDROM'
insert_virtual_media(url, device=’FLOPPY’)
Notifies iLO of the location of a virtual media diskette image. Takes the virtual media url and device as arguments.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.insert_virtual_media(url='http://172.17.1.41:8001/rhel_8_1.iso', device='FLOPPY')
>>> ilo_client.get_vm_status('FLOPPY')
{'WRITE_PROTECT': 'YES', 'VM_APPLET': 'CONNECTED', 'IMAGE_URL':
u'http://172.17.1.41:8001/rhel_8_1.iso', 'BOOT_OPTION':
'BOOT_ALWAYS', 'DEVICE': 'FLOPPY', 'IMAGE_INSERTED': 'YES'}
eject_virtual_media(device=’FLOPPY’)
Ejects the Virtual Media image if one is inserted. Takes virtual media device as argument.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.eject_virtual_media(device='FLOPPY')
>>> ilo_client.get_vm_status('FLOPPY')
{'WRITE_PROTECT': 'YES', 'VM_APPLET': 'DISCONNECTED', 'IMAGE_URL':
u'', 'BOOT_OPTION': 'NO_BOOT', 'DEVICE': 'FLOPPY', 'IMAGE_INSERTED':
'NO'}
set_vm_status(device=’FLOPPY’, boot_option=’BOOT_ONCE’, write_protect=’YES’)
Sets the Virtual Media drive status and allows the boot options for booting from the virtual media.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.set_vm_status(device='FLOPPY', boot_option='BOOT_ONCE', write_protect='YES')
get_current_boot_mode()
Retrieves the current boot mode settings.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_current_boot_mode()
u'UEFI'
get_pending_boot_mode()
Retrieves the pending boot mode settings
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_pending_boot_mode()
u'UEFI'
get_supported_boot_mode()
Lists all supported boot modes
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_supported_boot_mode()
'legacy bios and uefi'
set_pending_boot_mode(value)
Sets the boot mode of the system for next boot. Takes boot mode as argument.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.set_pending_boot_mode('UEFI')
>>> ilo_client.get_pending_boot_mode()
u'UEFI'
get_persistent_boot_device()
Retrieves the current persistent boot device set for the host
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_persistent_boot_device()
'CDROM'
update_persistent_boot(device_type=[])
Updates persistent boot based on the boot mode. Takes list of boot devices as argument.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.update_persistent_boot(['cdrom'])
get_secure_boot_mode()
Retrieves whether secure boot is enabled or not.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_secure_boot_mode()
False
set_secure_boot_mode(secure_boot_enable)
Enables/Disables secure boot on the server. Takes boolean value as argument.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_secure_boot_mode()
False
>>> ilo_client.set_secure_boot_mode(True)
>>> ilo_client.get_secure_boot_mode()
True
reset_secure_boot_keys()
Resets secure boot keys to manufacturing defaults.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.reset_secure_boot_keys()
clear_secure_boot_keys()
Resets all keys.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.clear_secure_boot_keys()
reset_ilo_credential(password)
Resets the iLO password.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.reset_ilo_credential('Pa5sword')
reset_ilo()
Resets the server iLO.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.reset_ilo()
reset_bios_to_default()
Resets the BIOS settings to default values.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.reset_bios_to_default()
get_host_uuid()
Retrieves the host UUID of the server
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_host_uuid()
('ProLiant DL180 Gen9', '35343537-3432-4753-4836-34305752394B')
get_host_health_data(data=None)
Returns the dictionary containing the embedded health data. Takes data to be retrieved as argument.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_host_health_data()
{'VERSION': '2.23', 'RESPONSE': {'STATUS': '0x0000', 'MESSAGE': 'No error'}, ...... }
get_host_health_present_power_reading(data=None)
Returns the power consumption of the server. Takes data to be retrieved as argument.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_host_health_present_power_reading()
'0 Watts'
get_host_health_power_supplies(data=None)
Returns the health information of power supplies. Takes data to be retrieved as argument.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_host_health_power_supplies()
[{'STATUS': {'VALUE': 'Unknown'}, 'CAPACITY': {'VALUE': 'N/A'}, 'PDS':
{'VALUE': 'Other'}, 'LABEL': {'VALUE': 'Power Supply 1'},
'HOTPLUG_CAPABLE': {'VALUE': 'No'}, 'SPARE': {'VALUE': 'N/A'},
'SERIAL_NUMBER': {'VALUE': 'N/A'}, 'MODEL': {'VALUE': 'N/A'},
'FIRMWARE_VERSION': {'VALUE': 'N/A'}, 'PRESENT': {'VALUE': 'No'}}]
get_host_health_fan_sensors(data=None)
Returns the health information from Fan Sensors. Takes data to be retrieved as argument.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_host_health_fan_sensors()
[{'STATUS': {'VALUE': 'Other'}, 'SPEED': {'UNIT': 'Percentage', 'VALUE':
'0'}, 'ZONE': {'VALUE': 'System'}, 'LABEL': {'VALUE': 'Fan 1'}},
{'STATUS': {'VALUE': 'Other'}, 'SPEED': {'UNIT': 'Percentage', 'VALUE':
'0'}, 'ZONE': {'VALUE': 'System'}, 'LABEL': {'VALUE': 'Fan 2'}},
{'STATUS': {'VALUE': 'Other'}, 'SPEED': {'UNIT': 'Percentage', 'VALUE':
'0'}, 'ZONE': {'VALUE': 'System'}, 'LABEL': {'VALUE': 'Fan 3'}},
{'STATUS': {'VALUE': 'Other'}, 'SPEED': {'UNIT': 'Percentage', 'VALUE':
'0'}, 'ZONE': {'VALUE': 'System'}, 'LABEL': {'VALUE': 'Fan 4'}},
{'STATUS': {'VALUE': 'Other'}, 'SPEED': {'UNIT': 'Percentage', 'VALUE':
'0'}, 'ZONE': {'VALUE': 'System'}, 'LABEL': {'VALUE': 'Fan 5'}}]
get_host_health_temperature_sensors(data=None)
Returns the health information from Temperature Sensors. Takes data to be retrieved as argument.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_host_health_temperature_sensors()
[{'LABEL': {'VALUE': '01-CPU 1'}, 'LOCATION': {'VALUE': 'CPU'}, 'STATUS': {'VALUE':
'Not Installed'}, 'CURRENTREADING': {'VALUE': 'N/A'}, 'CAUTION': {'VALUE': 'N/A'},
'CRITICAL': {'VALUE': 'N/A'}},,
{'LABEL': {'VALUE': '02-CPU 1'}, 'LOCATION': {'VALUE': 'CPU'}, 'STATUS': {'VALUE':
'OK'}, 'CURRENTREADING': {'VALUE': '40', 'UNIT': 'Celsius'}, 'CAUTION': {'VALUE':
'70', 'UNIT': 'Celsius'}, 'CRITICAL': {'VALUE': 'N/A'}},
{'LABEL': {'VALUE': '03-CPU 2'}, 'LOCATION': {'VALUE': 'CPU'}, 'STATUS': {'VALUE':
'Not Installed'}, 'CURRENTREADING': {'VALUE': 'N/A'}, 'CAUTION': {'VALUE': 'N/A'},
'CRITICAL': {'VALUE': 'N/A'}},
{'LABEL': {'VALUE': '04-CPU 2'}, 'LOCATION': {'VALUE': 'CPU'}, 'STATUS': {'VALUE':
'Not Installed'}, 'CURRENTREADING': {'VALUE': 'N/A'}, 'CAUTION': {'VALUE': 'N/A'},
'CRITICAL': {'VALUE': 'N/A'}}]
get_host_health_at_a_glance(data=None)
Returns health at a glance report. Takes data to be retrieved as argument.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_host_health_at_a_glance()
{'TEMPERATURE': {'STATUS': 'Not Installed'}, 'BATTERY': {'STATUS': 'Not
Installed'}, 'STORAGE': {'STATUS': 'OK'}, 'FANS': {'STATUS': 'Not
Installed'}, 'BIOS_HARDWARE': {'STATUS': 'OK'}, 'MEMORY': {'STATUS':
'Other'}, 'POWER_SUPPLIES': {'STATUS': 'Not Installed'}, 'PROCESSOR':
{'STATUS': 'OK'}, 'NETWORK': {'STATUS': 'OK'}}
get_host_power_readings()
Returns the host power reading.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_host_power_readings()
{'MAXIMUM_POWER_READING': {'UNIT': 'Watts', 'VALUE': '243'},
'MINIMUM_POWER_READING': {'UNIT': 'Watts', 'VALUE': '136'},
'PRESENT_POWER_READING': {'UNIT': 'Watts', 'VALUE': '224'},
'AVERAGE_POWER_READING': {'UNIT': 'Watts', 'VALUE': '162'}}
get_essential_properties()
Returns the essential scheduling properties.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_essential_properties()
{'macs': {u'Port 6': u'80:30:e0:2d:3f:31', u'Port 5':
u'80:30:e0:2d:3f:30'}, 'properties': {'memory_mb': 65536, 'cpu_arch':
'x86', 'local_gb': 278, 'cpus': 48}}
get_server_capabilities()
Returns hardware properties which can be used for scheduling.
This method can discover the following properties:
-
ilo_firmware_version: iLO firmware version
-
rom_firmware_version: ROM firmware version
-
secure_boot: secure boot is supported or not. The possible values are ‘true’ or ‘false’. The value is returned as ‘true’ if secure boot is supported by the server.
-
server_model: server model
-
pci_gpu_devices: number of gpu devices connected to the bare metal.
-
nic_capacity: the max speed of the embedded NIC adapter.
-
sriov_enabled: true, if server has the SRIOV supporting NIC.
-
has_rotational: true, if server has HDD disk.
-
has_ssd: true, if server has SSD disk.
-
has_nvme_ssd: true, if server has NVME SSD disk.
-
cpu_vt: true, if server supports cpu virtualization.
-
hardware_supports_raid: true, if RAID can be configured on the server using RAID controller.
-
nvdimm_n: true, if server has NVDIMM_N type of persistent memory.
-
persistent_memory: true, if server has persistent memory.
-
logical_nvdimm_n: true, if server has logical NVDIMM_N configured.
-
boot_mode_bios: true, if server boot mode is BIOS.
-
boot_mode_uefi: true, if server boot mode is UEFI.
-
iscsi_boot: true, if server supported UEFI iSCSI boot.
-
rotational_drive__rpm: The capabilities rotational_drive_4800_rpm, rotational_drive_5400_rpm, rotational_drive_7200_rpm, rotational_drive_10000_rpm and rotational_drive_15000_rpm are set to true if the server has HDD drives with speed of 4800, 5400, 7200, 10000 and 15000 rpm respectively.
-
logical_raid_level_<raid_level>: The capabilities logical_raid_level_0, logical_raid_level_1, logical_raid_level_2, logical_raid_level_5, logical_raid_level_6, logical_raid_level_10, logical_raid_level_50 and logical_raid_level_60 are set to true if any of the raid levels among 0, 1, 2, 5, 6, 10, 50 and 60 are configured on the system.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_server_capabilities()
{'logical_raid_level_0': 'true', 'has_rotational': 'true',
'rom_firmware_version': u'U32 v2.02 (03/19/2019)',
'hardware_supports_raid': 'true', 'cpu_vt': 'true',
'sriov_enabled': 'true', 'boot_mode_bios': 'true',
'trusted_boot': 'true', 'boot_mode_uefi': 'true',
'server_model': u'ProLiant DL360 Gen10', 'nic_capacity': '16Gb',
'pci_gpu_devices': 1, 'ilo_firmware_version': u'iLO 5 v1.40',
'secure_boot': 'true', 'drive_rotational_10000_rpm': 'true',
'iscsi_boot': 'true'}
activate_license(key)
Activates iLO license. Takes license key as argument.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.activate_license('YOUR_LICENSE_KEY')
update_firmware(firmware_url, component_type)
Updates the given firmware on the server. Takes location of firmware file and the component to be applied to as arguments.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.update_firmware('http://172.17.1.41/ilo_firmware', 'ilo')
inject_nmi()
Injects an NMI (Non Maskable Interrupt) for a node immediately.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.inject_nmi()
get_host_post_state()
Returns the current state of system POST.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_host_post_state()
'InPostDiscoveryComplete'
get_current_bios_settings(only_allowed_settings=False)
Returns current BIOS settings.
When only_allowed_settings is set to True, only allowed BIOS settings are returned.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_current_bios_settings(only_allowed_settings=True)
{'PowerRegulator': u'DynamicPowerSavings', 'AdvancedMemProtection':
u'FastFaultTolerantADDDC', 'DynamicPowerCapping': u'Disabled',
'BootOrderPolicy': u'RetryIndefinitely', 'Sriov': u'Enabled',
'AutoPowerOn': u'RestoreLastState', 'IntelProcVtd': u'Enabled',
'ProcVirtualization': u'Enabled', 'ThermalShutdown': u'Enabled',
'IntelTxt': u'Disabled', 'SecureBootStatus': u'Disabled',
'WorkloadProfile': u'GeneralPowerEfficientCompute',
'IntelPerfMonitoring': u'Disabled', 'TpmType': u'Tpm20',
'UefiOptimizedBoot': u'Enabled', 'ThermalConfig': u'OptimalCooling',
'ProcAes': u'Enabled', 'BootMode': u'Uefi', 'ProcTurbo': u'Enabled',
'IntelligentProvisioning': u'Enabled', 'ProcHyperthreading': u'Enabled',
'TpmState': u'PresentEnabled', 'CollabPowerControl': u'Enabled'}
When only_allowed_settings is set to False, all the BIOS settings supported by iLO are returned.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_current_bios_settings(only_allowed_settings=False)
{'AcpiHpet': 'Enabled', 'AcpiRootBridgePxm': 'Enabled', 'AcpiSlit': 'Enabled',
'AdjSecPrefetch': 'Enabled', 'AdminEmail': '', 'AdminName': '',
'AdminOtherInfo': '', 'AdminPhone': '', 'AdvCrashDumpMode': 'Disabled',
'AdvancedMemProtection': 'FastFaultTolerantADDDC', 'AsrStatus': 'Enabled',
'AsrTimeoutMinutes': 'Timeout10', 'AssetTagProtection': 'Unlocked',
'AutoPowerOn': 'RestoreLastState', 'BootMode': 'LegacyBios', 'BootOrderPolicy':
'RetryIndefinitely', 'ChannelInterleaving': 'Enabled', 'CollabPowerControl':
'Enabled', 'ConsistentDevNaming': 'LomsAndSlots', 'CustomPostMessage': '',
'DaylightSavingsTime': 'Disabled', 'DcuIpPrefetcher': 'Enabled',
'DcuStreamPrefetcher': 'Enabled', 'Dhcpv4': 'Enabled', 'DynamicPowerCapping':
'Disabled', 'EmbNicEnable': 'Auto', 'EmbNicLinkSpeed': 'Auto',
'EmbNicPCIeOptionROM': 'Enabled', 'EmbSas1Aspm': 'Disabled', 'EmbSas1Boot':
'TwentyFourTargets', 'EmbSas1Enable': 'Auto', 'EmbSas1LinkSpeed': 'Auto',
'EmbSas1PcieOptionROM': 'Enabled', 'EmbSata1Aspm': 'Disabled', 'EmbSata2Aspm':
'Disabled', 'EmbVideoConnection': 'Auto', 'EmbeddedDiagnostics': 'Enabled',
'EmbeddedSata': 'Ahci', 'EmbeddedSerialPort': 'Com2Irq3', 'EmbeddedUefiShell':
'Enabled', 'EmsConsole': 'Disabled', 'EnabledCoresPerProc': 0,
'EnergyEfficientTurbo': 'Enabled', 'EnergyPerfBias': 'BalancedPerf',
'EraseUserDefaults': 'No', 'ExtendedAmbientTemp': 'Disabled', 'ExtendedMemTest':
'Disabled', 'F11BootMenu': 'Enabled', 'FCScanPolicy': 'CardConfig',
'FanFailPolicy': 'Shutdown', 'FanInstallReq': 'EnableMessaging', 'FlexLom1Aspm':
'Disabled', 'HttpSupport': 'Auto', 'HwPrefetcher': 'Enabled',
'IODCConfiguration': 'Auto', 'IntelDmiLinkFreq': 'Auto', 'IntelNicDmaChannels':
'Enabled', 'IntelPerfMonitoring': 'Disabled', 'IntelProcVtd': 'Enabled',
'IntelligentProvisioning': 'Enabled', 'InternalSDCardSlot': 'Enabled',
'Ipv4Address': '0.0.0.0', 'Ipv4Gateway': '0.0.0.0', 'Ipv4PrimaryDNS': '0.0.0.0',
'Ipv4SecondaryDNS': '0.0.0.0', 'Ipv4SubnetMask': '0.0.0.0', 'Ipv6Address': '::',
'Ipv6ConfigPolicy': 'Automatic', 'Ipv6Duid': 'Auto', 'Ipv6Gateway': '::',
'Ipv6PrimaryDNS': '::', 'Ipv6SecondaryDNS': '::', 'LLCDeadLineAllocation':
'Enabled', 'LlcPrefetch': 'Disabled', 'LocalRemoteThreshold': 'Auto',
'MaxMemBusFreqMHz': 'Auto', 'MaxPcieSpeed': 'PerPortCtrl', 'MemClearWarmReset':
'Disabled', 'MemFastTraining': 'Enabled', 'MemMirrorMode': 'Full',
'MemPatrolScrubbing': 'Enabled', 'MemRefreshRate': 'Refreshx1',
'MemoryControllerInterleaving': 'Auto', 'MemoryRemap': 'NoAction',
'MinProcIdlePkgState': 'C6Retention', 'MinProcIdlePower': 'C6',
'MixedPowerSupplyReporting': 'Enabled', 'NetworkBootRetry': 'Enabled',
'NetworkBootRetryCount': 20, 'NicBoot1': 'NetworkBoot', 'NicBoot2': 'Disabled',
'NicBoot3': 'Disabled', 'NicBoot4': 'Disabled', 'NodeInterleaving': 'Disabled',
'NumaGroupSizeOpt': 'Flat', 'NvmeOptionRom': 'Enabled',
'OpportunisticSelfRefresh': 'Disabled', 'PciPeerToPeerSerialization':
'Disabled', 'PciResourcePadding': 'Normal', 'PersistentMemBackupPowerPolicy':
'WaitForBackupPower', 'PostBootProgress': 'Disabled', 'PostDiscoveryMode':
'Auto', 'PostF1Prompt': 'Delayed20Sec', 'PostVideoSupport': 'DisplayAll',
'PowerButton': 'Enabled', 'PowerOnDelay': 'NoDelay', 'PowerRegulator':
'DynamicPowerSavings', 'PreBootNetwork': 'Auto', 'PrebootNetworkEnvPolicy':
'Auto', 'PrebootNetworkProxy': '', 'ProcAes': 'Enabled', 'ProcHyperthreading':
'Enabled', 'ProcTurbo': 'Enabled', 'ProcVirtualization': 'Enabled',
'ProcX2Apic': 'Enabled', 'ProcessorConfigTDPLevel': 'Normal',
'ProcessorJitterControl': 'Disabled', 'ProcessorJitterControlFrequency': 0,
'ProcessorJitterControlOptimization': 'ZeroLatency', 'ProductId': '868703-B21',
'RedundantPowerSupply': 'BalancedMode', 'RemovableFlashBootSeq':
'ExternalKeysFirst', 'RestoreDefaults': 'No', 'RestoreManufacturingDefaults':
'No', 'RomSelection': 'CurrentRom', 'SataSecureErase': 'Disabled',
'SaveUserDefaults': 'No', 'SecStartBackupImage': 'Disabled', 'SecureBootStatus':
'Disabled', 'SerialConsoleBaudRate': 'BaudRate115200', 'SerialConsoleEmulation':
'Vt100Plus', 'SerialConsolePort': 'Auto', 'SerialNumber': 'SGH744YPVS',
'ServerAssetTag': '', 'ServerConfigLockStatus': 'Disabled', 'ServerName':
'localhost', 'ServerOtherInfo': '', 'ServerPrimaryOs': '', 'ServiceEmail': '',
'ServiceName': '', 'ServiceOtherInfo': '', 'ServicePhone': '',
'SetupBrowserSelection': 'Auto', 'Sriov': 'Enabled', 'StaleAtoS': 'Disabled',
'SubNumaClustering': 'Disabled', 'ThermalConfig': 'OptimalCooling',
'ThermalShutdown': 'Enabled', 'TimeFormat': 'Utc', 'TimeZone': 'Utc0',
'TpmChipId': 'None', 'TpmFips': 'NotSpecified', 'TpmState': 'NotPresent',
'TpmType': 'NoTpm', 'UefiOptimizedBoot': 'Disabled', 'UefiSerialDebugLevel':
'Disabled', 'UefiShellBootOrder': 'Disabled', 'UefiShellScriptVerification':
'Disabled', 'UefiShellStartup': 'Disabled', 'UefiShellStartupLocation': 'Auto',
'UefiShellStartupUrl': '', 'UefiShellStartupUrlFromDhcp': 'Disabled',
'UncoreFreqScaling': 'Auto', 'UrlBootFile': '', 'UrlBootFile2': '',
'UrlBootFile3': '', 'UrlBootFile4': '', 'UsbBoot': 'Enabled', 'UsbControl':
'UsbEnabled', 'UserDefaultsState': 'Disabled', 'UtilityLang': 'English',
'VirtualInstallDisk': 'Disabled', 'VirtualSerialPort': 'Com1Irq4',
'VlanControl': 'Disabled', 'VlanId': 0, 'VlanPriority': 0, 'WakeOnLan':
'Enabled', 'WorkloadProfile': 'GeneralPowerEfficientCompute', 'XptPrefetcher':
'Auto', 'iSCSIPolicy': 'SoftwareInitiator'}
get_pending_bios_settings(only_allowed_settings=False)
Returns pending BIOS settings.
When only_allowed_settings is set to True, only allowed BIOS settings are returned.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_pending_bios_settings(True)
{'PowerRegulator': u'DynamicPowerSavings', 'AdvancedMemProtection':
u'FastFaultTolerantADDDC', 'DynamicPowerCapping': u'Disabled',
'BootOrderPolicy': u'RetryIndefinitely', 'Sriov': u'Enabled',
'AutoPowerOn': u'RestoreLastState', 'IntelProcVtd': u'Enabled',
'ProcVirtualization': u'Enabled', 'ThermalShutdown': u'Enabled',
'IntelTxt': u'Disabled', 'SecureBootStatus': u'Disabled',
'WorkloadProfile': u'GeneralPowerEfficientCompute',
'IntelPerfMonitoring': u'Disabled', 'TpmType': u'Tpm20',
'UefiOptimizedBoot': u'Enabled', 'ThermalConfig': u'OptimalCooling',
'ProcAes': u'Enabled', 'BootMode': u'Uefi', 'ProcTurbo': u'Enabled',
'IntelligentProvisioning': u'Enabled', 'ProcHyperthreading': u'Enabled',
'TpmState': u'PresentEnabled', 'CollabPowerControl': u'Enabled'}
When only_allowed_settings is set to False, all the BIOS settings supported by iLO are returned.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_pending_bios_settings(False)
{'AcpiHpet': 'Enabled', 'AcpiRootBridgePxm': 'Enabled', 'AcpiSlit': 'Enabled',
'AdjSecPrefetch': 'Enabled', 'AdminEmail': '', 'AdminName': '',
'AdminOtherInfo': '', 'AdminPhone': '', 'AdvCrashDumpMode': 'Disabled',
'AdvancedMemProtection': 'FastFaultTolerantADDDC', 'AsrStatus': 'Enabled',
'AsrTimeoutMinutes': 'Timeout10', 'AssetTagProtection': 'Unlocked',
'AutoPowerOn': 'RestoreLastState', 'BootMode': 'LegacyBios', 'BootOrderPolicy':
'RetryIndefinitely', 'ChannelInterleaving': 'Enabled', 'CollabPowerControl':
'Enabled', 'ConsistentDevNaming': 'LomsAndSlots', 'CustomPostMessage': '',
'DaylightSavingsTime': 'Disabled', 'DcuIpPrefetcher': 'Enabled',
'DcuStreamPrefetcher': 'Enabled', 'Dhcpv4': 'Enabled', 'DynamicPowerCapping':
'Disabled', 'EmbNicEnable': 'Auto', 'EmbNicLinkSpeed': 'Auto',
'EmbNicPCIeOptionROM': 'Enabled', 'EmbSas1Aspm': 'Disabled', 'EmbSas1Boot':
'TwentyFourTargets', 'EmbSas1Enable': 'Auto', 'EmbSas1LinkSpeed': 'Auto',
'EmbSas1PcieOptionROM': 'Enabled', 'EmbSata1Aspm': 'Disabled', 'EmbSata2Aspm':
'Disabled', 'EmbVideoConnection': 'Auto', 'EmbeddedDiagnostics': 'Enabled',
'EmbeddedSata': 'Ahci', 'EmbeddedSerialPort': 'Com2Irq3', 'EmbeddedUefiShell':
'Enabled', 'EmsConsole': 'Disabled', 'EnabledCoresPerProc': 0,
'EnergyEfficientTurbo': 'Enabled', 'EnergyPerfBias': 'BalancedPerf',
'EraseUserDefaults': 'No', 'ExtendedAmbientTemp': 'Disabled', 'ExtendedMemTest':
'Disabled', 'F11BootMenu': 'Enabled', 'FCScanPolicy': 'CardConfig',
'FanFailPolicy': 'Shutdown', 'FanInstallReq': 'EnableMessaging', 'FlexLom1Aspm':
'Disabled', 'HttpSupport': 'Auto', 'HwPrefetcher': 'Enabled',
'IODCConfiguration': 'Auto', 'IntelDmiLinkFreq': 'Auto', 'IntelNicDmaChannels':
'Enabled', 'IntelPerfMonitoring': 'Disabled', 'IntelProcVtd': 'Enabled',
'IntelligentProvisioning': 'Enabled', 'InternalSDCardSlot': 'Enabled',
'Ipv4Address': '0.0.0.0', 'Ipv4Gateway': '0.0.0.0', 'Ipv4PrimaryDNS': '0.0.0.0',
'Ipv4SecondaryDNS': '0.0.0.0', 'Ipv4SubnetMask': '0.0.0.0', 'Ipv6Address': '::',
'Ipv6ConfigPolicy': 'Automatic', 'Ipv6Duid': 'Auto', 'Ipv6Gateway': '::',
'Ipv6PrimaryDNS': '::', 'Ipv6SecondaryDNS': '::', 'LLCDeadLineAllocation':
'Enabled', 'LlcPrefetch': 'Disabled', 'LocalRemoteThreshold': 'Auto',
'MaxMemBusFreqMHz': 'Auto', 'MaxPcieSpeed': 'PerPortCtrl', 'MemClearWarmReset':
'Disabled', 'MemFastTraining': 'Enabled', 'MemMirrorMode': 'Full',
'MemPatrolScrubbing': 'Enabled', 'MemRefreshRate': 'Refreshx1',
'MemoryControllerInterleaving': 'Auto', 'MemoryRemap': 'NoAction',
'MinProcIdlePkgState': 'C6Retention', 'MinProcIdlePower': 'C6',
'MixedPowerSupplyReporting': 'Enabled', 'NetworkBootRetry': 'Enabled',
'NetworkBootRetryCount': 20, 'NicBoot1': 'NetworkBoot', 'NicBoot2': 'Disabled',
'NicBoot3': 'Disabled', 'NicBoot4': 'Disabled', 'NodeInterleaving': 'Disabled',
'NumaGroupSizeOpt': 'Flat', 'NvmeOptionRom': 'Enabled',
'OpportunisticSelfRefresh': 'Disabled', 'PciPeerToPeerSerialization':
'Disabled', 'PciResourcePadding': 'Normal', 'PersistentMemBackupPowerPolicy':
'WaitForBackupPower', 'PostBootProgress': 'Disabled', 'PostDiscoveryMode':
'Auto', 'PostF1Prompt': 'Delayed20Sec', 'PostVideoSupport': 'DisplayAll',
'PowerButton': 'Enabled', 'PowerOnDelay': 'NoDelay', 'PowerRegulator':
'DynamicPowerSavings', 'PreBootNetwork': 'Auto', 'PrebootNetworkEnvPolicy':
'Auto', 'PrebootNetworkProxy': '', 'ProcAes': 'Enabled', 'ProcHyperthreading':
'Enabled', 'ProcTurbo': 'Enabled', 'ProcVirtualization': 'Enabled',
'ProcX2Apic': 'Enabled', 'ProcessorConfigTDPLevel': 'Normal',
'ProcessorJitterControl': 'Disabled', 'ProcessorJitterControlFrequency': 0,
'ProcessorJitterControlOptimization': 'ZeroLatency', 'ProductId': '868703-B21',
'RedundantPowerSupply': 'BalancedMode', 'RemovableFlashBootSeq':
'ExternalKeysFirst', 'RestoreDefaults': 'No', 'RestoreManufacturingDefaults':
'No', 'RomSelection': 'CurrentRom', 'SataSecureErase': 'Disabled',
'SaveUserDefaults': 'No', 'SecStartBackupImage': 'Disabled', 'SecureBootStatus':
'Disabled', 'SerialConsoleBaudRate': 'BaudRate115200', 'SerialConsoleEmulation':
'Vt100Plus', 'SerialConsolePort': 'Auto', 'SerialNumber': 'SGH744YPVS',
'ServerAssetTag': '', 'ServerConfigLockStatus': 'Disabled', 'ServerName':
'localhost', 'ServerOtherInfo': '', 'ServerPrimaryOs': '', 'ServiceEmail': '',
'ServiceName': '', 'ServiceOtherInfo': '', 'ServicePhone': '',
'SetupBrowserSelection': 'Auto', 'Sriov': 'Enabled', 'StaleAtoS': 'Disabled',
'SubNumaClustering': 'Disabled', 'ThermalConfig': 'OptimalCooling',
'ThermalShutdown': 'Enabled', 'TimeFormat': 'Utc', 'TimeZone': 'Utc0',
'TpmChipId': 'None', 'TpmFips': 'NotSpecified', 'TpmState': 'NotPresent',
'TpmType': 'NoTpm', 'UefiOptimizedBoot': 'Disabled', 'UefiSerialDebugLevel':
'Disabled', 'UefiShellBootOrder': 'Disabled', 'UefiShellScriptVerification':
'Disabled', 'UefiShellStartup': 'Disabled', 'UefiShellStartupLocation': 'Auto',
'UefiShellStartupUrl': '', 'UefiShellStartupUrlFromDhcp': 'Disabled',
'UncoreFreqScaling': 'Auto', 'UrlBootFile': '', 'UrlBootFile2': '',
'UrlBootFile3': '', 'UrlBootFile4': '', 'UsbBoot': 'Enabled', 'UsbControl':
'UsbEnabled', 'UserDefaultsState': 'Disabled', 'UtilityLang': 'English',
'VirtualInstallDisk': 'Disabled', 'VirtualSerialPort': 'Com1Irq4',
'VlanControl': 'Disabled', 'VlanId': 0, 'VlanPriority': 0, 'WakeOnLan':
'Enabled', 'WorkloadProfile': 'GeneralPowerEfficientCompute', 'XptPrefetcher':
'Auto', 'iSCSIPolicy': 'SoftwareInitiator'}
set_bios_settings(data=None, only_allowed_settings=False)
Sets current BIOS settings to the provided data. Takes a dictionary of BIOS settings to be appplied as argument.
When only_allowed_settings is set to True, only allowed BIOS settings are returned
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> data = {
"BootOrderPolicy": "AttemptOnce",
"IntelPerfMonitoring": "Enabled",
"IntelProcVtd": "Disabled",
"UefiOptimizedBoot": "Disabled",
"PowerProfile": "MaxPerf"}
>>> apply_filter = True
>>> ilo_client.set_bios_settings(data = data, only_allowed_settings= apply_filter)
When only_allowed_settings is set to False, all the BIOS settings supported by iLO are returned
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> apply_filter = False
>>> ilo_client.set_bios_settings(data, apply_filter)
get_default_bios_settings(only_allowed_settings=False)
Returns default BIOS settings.
When only_allowed_settings is set to True, only allowed BIOS settings are returned
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_default_bios_settings(True)
{'PowerRegulator': u'DynamicPowerSavings', 'AdvancedMemProtection':
u'AdvancedEcc', 'DynamicPowerCapping': u'Disabled', 'BootOrderPolicy':
u'RetryIndefinitely', 'Sriov': u'Enabled', 'AutoPowerOn':
u'RestoreLastState', 'IntelProcVtd': u'Enabled', 'ProcVirtualization':
u'Enabled', 'ThermalShutdown': u'Enabled', 'IntelTxt': u'Disabled',
'SecureBootStatus': u'Disabled', 'WorkloadProfile':
u'GeneralPowerEfficientCompute', 'IntelPerfMonitoring': u'Disabled',
'TpmType': u'NoTpm', 'UefiOptimizedBoot': u'Enabled', 'ThermalConfig':
u'OptimalCooling', 'ProcAes': u'Enabled', 'BootMode': u'Uefi',
'ProcTurbo': u'Enabled', 'IntelligentProvisioning': u'Enabled',
'ProcHyperthreading': u'Enabled', 'TpmState': u'NotPresent',
'CollabPowerControl': u'Enabled'}
When only_allowed_settings is set to False, all the BIOS settings supported by iLO are returned
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_default_bios_settings(False)
{'AcpiHpet': 'Enabled', 'AcpiRootBridgePxm': 'Enabled', 'AcpiSlit': 'Enabled',
'AdjSecPrefetch': 'Enabled', 'AdminEmail': '', 'AdminName': '',
'AdminOtherInfo': '', 'AdminPhone': '', 'AdvCrashDumpMode': 'Disabled',
'AdvancedMemProtection': 'AdvancedEcc', 'AsrStatus': 'Enabled',
'AsrTimeoutMinutes': 'Timeout10', 'AssetTagProtection': 'Unlocked',
'AutoPowerOn': 'RestoreLastState', 'BootMode': 'Uefi', 'BootOrderPolicy':
'RetryIndefinitely', 'ChannelInterleaving': 'Enabled', 'CollabPowerControl':
'Enabled', 'ConsistentDevNaming': 'LomsAndSlots', 'CustomPostMessage': '',
'DaylightSavingsTime': 'Disabled', 'DcuIpPrefetcher': 'Enabled',
'DcuStreamPrefetcher': 'Enabled', 'Dhcpv4': 'Enabled', 'DynamicPowerCapping':
'Disabled', 'EmbNicEnable': 'Auto', 'EmbNicLinkSpeed': 'Auto',
'EmbNicPCIeOptionROM': 'Enabled', 'EmbSas1Aspm': 'Disabled', 'EmbSas1Boot':
'TwentyFourTargets', 'EmbSas1Enable': 'Auto', 'EmbSas1LinkSpeed': 'Auto',
'EmbSas1PcieOptionROM': 'Enabled', 'EmbSata1Aspm': 'Disabled', 'EmbSata2Aspm':
'Disabled', 'EmbVideoConnection': 'Auto', 'EmbeddedDiagnostics': 'Enabled',
'EmbeddedSata': 'Ahci', 'EmbeddedSerialPort': 'Com2Irq3', 'EmbeddedUefiShell':
'Enabled', 'EmsConsole': 'Disabled', 'EnabledCoresPerProc': 0,
'EnergyEfficientTurbo': 'Enabled', 'EnergyPerfBias': 'BalancedPerf',
'EraseUserDefaults': 'No', 'ExtendedAmbientTemp': 'Disabled', 'ExtendedMemTest':
'Disabled', 'F11BootMenu': 'Enabled', 'FCScanPolicy': 'CardConfig',
'FanFailPolicy': 'Shutdown', 'FanInstallReq': 'EnableMessaging', 'FlexLom1Aspm':
'Disabled', 'HttpSupport': 'Auto', 'HwPrefetcher': 'Enabled',
'IODCConfiguration': 'Auto', 'IntelDmiLinkFreq': 'Auto', 'IntelNicDmaChannels':
'Enabled', 'IntelPerfMonitoring': 'Disabled', 'IntelProcVtd': 'Enabled',
'IntelligentProvisioning': 'Enabled', 'InternalSDCardSlot': 'Enabled',
'Ipv4Address': '0.0.0.0', 'Ipv4Gateway': '0.0.0.0', 'Ipv4PrimaryDNS': '0.0.0.0',
'Ipv4SecondaryDNS': '0.0.0.0', 'Ipv4SubnetMask': '0.0.0.0', 'Ipv6Address': '::',
'Ipv6ConfigPolicy': 'Automatic', 'Ipv6Duid': 'Auto', 'Ipv6Gateway': '::',
'Ipv6PrimaryDNS': '::', 'Ipv6SecondaryDNS': '::', 'LLCDeadLineAllocation':
'Enabled', 'LlcPrefetch': 'Disabled', 'LocalRemoteThreshold': 'Auto',
'MaxMemBusFreqMHz': 'Auto', 'MaxPcieSpeed': 'PerPortCtrl', 'MemClearWarmReset':
'Disabled', 'MemFastTraining': 'Enabled', 'MemMirrorMode': 'Full',
'MemPatrolScrubbing': 'Enabled', 'MemRefreshRate': 'Refreshx1',
'MemoryControllerInterleaving': 'Auto', 'MemoryRemap': 'NoAction',
'MinProcIdlePkgState': 'C6Retention', 'MinProcIdlePower': 'C6',
'MixedPowerSupplyReporting': 'Enabled', 'NetworkBootRetry': 'Enabled',
'NetworkBootRetryCount': 20, 'NicBoot1': 'NetworkBoot', 'NicBoot2': 'Disabled',
'NicBoot3': 'Disabled', 'NicBoot4': 'Disabled', 'NodeInterleaving': 'Disabled',
'NumaGroupSizeOpt': 'Flat', 'NvmeOptionRom': 'Enabled',
'OpportunisticSelfRefresh': 'Disabled', 'PciPeerToPeerSerialization':
'Disabled', 'PciResourcePadding': 'Normal', 'PersistentMemBackupPowerPolicy':
'WaitForBackupPower', 'PostBootProgress': 'Disabled', 'PostDiscoveryMode':
'Auto', 'PostF1Prompt': 'Delayed20Sec', 'PostVideoSupport': 'DisplayAll',
'PowerButton': 'Enabled', 'PowerOnDelay': 'NoDelay', 'PowerRegulator':
'DynamicPowerSavings', 'PreBootNetwork': 'Auto', 'PrebootNetworkEnvPolicy':
'Auto', 'PrebootNetworkProxy': '', 'ProcAes': 'Enabled', 'ProcHyperthreading':
'Enabled', 'ProcTurbo': 'Enabled', 'ProcVirtualization': 'Enabled',
'ProcX2Apic': 'Enabled', 'ProcessorConfigTDPLevel': 'Normal',
'ProcessorJitterControl': 'Disabled', 'ProcessorJitterControlFrequency': 0,
'ProcessorJitterControlOptimization': 'ZeroLatency', 'RedundantPowerSupply':
'BalancedMode', 'RemovableFlashBootSeq': 'ExternalKeysFirst', 'RestoreDefaults':
'No', 'RestoreManufacturingDefaults': 'No', 'SataSecureErase': 'Disabled',
'SaveUserDefaults': 'No', 'SecStartBackupImage': 'Disabled', 'SecureBootStatus':
'Disabled', 'SerialConsoleBaudRate': 'BaudRate115200', 'SerialConsoleEmulation':
'Vt100Plus', 'SerialConsolePort': 'Auto', 'ServerAssetTag': '',
'ServerConfigLockStatus': 'Disabled', 'ServerName': '', 'ServerOtherInfo': '',
'ServerPrimaryOs': '', 'ServiceEmail': '', 'ServiceName': '',
'ServiceOtherInfo': '', 'ServicePhone': '', 'SetupBrowserSelection': 'Auto',
'Sriov': 'Enabled', 'StaleAtoS': 'Disabled', 'SubNumaClustering': 'Disabled',
'ThermalConfig': 'OptimalCooling', 'ThermalShutdown': 'Enabled', 'TimeFormat':
'Utc', 'TimeZone': 'Utc0', 'TpmChipId': 'None', 'TpmFips': 'NotSpecified',
'TpmState': 'NotPresent', 'TpmType': 'NoTpm', 'UefiOptimizedBoot': 'Enabled',
'UefiSerialDebugLevel': 'Disabled', 'UefiShellBootOrder': 'Disabled',
'UefiShellScriptVerification': 'Disabled', 'UefiShellStartup': 'Disabled',
'UefiShellStartupLocation': 'Auto', 'UefiShellStartupUrl': '',
'UefiShellStartupUrlFromDhcp': 'Disabled', 'UncoreFreqScaling': 'Auto',
'UrlBootFile': '', 'UrlBootFile2': '', 'UrlBootFile3': '', 'UrlBootFile4': '',
'UsbBoot': 'Enabled', 'UsbControl': 'UsbEnabled', 'UserDefaultsState':
'Disabled', 'UtilityLang': 'English', 'VirtualInstallDisk': 'Disabled',
'VirtualSerialPort': 'Com1Irq4', 'VlanControl': 'Disabled', 'VlanId': 0,
'VlanPriority': 0, 'WakeOnLan': 'Enabled', 'WorkloadProfile':
'GeneralPowerEfficientCompute', 'XptPrefetcher': 'Auto', 'iSCSIPolicy':
'SoftwareInitiator'}
delete_raid_configuration()
Deletes all logical drives from the system.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.delete_raid_configuration()
create_raid_configuration(raid_config)
Creates raid configuration on the hardware. Takes a dictionary containing target raid configuration data as argument.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> raid_config = {
'logical_disks': [{'size_gb': 279,
'physical_disks': [u'1I:1:2'],
'raid_level': u'0'}]}
>>> ilo_client.create_raid_configuration(raid_config)
read_raid_configuration(raid_config=None)
Reads the raid configuration of the hardware. In case of post-delete read the raid_config value is None. In case of post-create, raid_config is a dictionary containing target raid configuration data.
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.read_raid_configuration()
{'logical_disks': [{'size_gb': 279, 'physical_disks': [u'1I:1:2'],
'raid_level': u'0', 'root_device_hint': {'wwn':
u'0x600508B1001C99DF1EAFA712BAFECD59'}, 'controller': None,
'volume_name': u'd625fcce-6750-4b5a-93e1-a08abf7f6060'}]}
get_bios_settings_result()
Returns the result of bios settings applied
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.get_bios_settings_result()
{'status': 'success', 'results': [{u'MessageId': u'Base.1.0.Success'}]}
add_tls_certificate(cert_file_list)
Adds the TLS certificate to the iLO
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> ilo_client.add_tls_certificate(['/xyz/ilo.crt'])
remove_tls_certificate(fp_list)
Removes the TLS certificate from the iLO
>>> from proliantutils.ilo import client
>>> ilo_client = client.IloClient('10.10.1.57', 'Administrator', 'password')
>>> fp = 'FA:3A:68:C7:7E:ED:90:21:D2:FA:3E:54:6B:0C:14:D3:2F:8D:43:50:F7:05:A7:0F:1C:68:35:DB:5C:D2:53:28'
>>> ilo_client.remove_tls_certificate([fp])