#!/bin/bash

# Copyright 2015 VMware, Inc.
#
# All Rights Reserved
#
#    Licensed under the Apache License, Version 2.0 (the "License"); you may
#    not use this file except in compliance with the License. You may obtain
#    a copy of the License at
#
#         http://www.apache.org/licenses/LICENSE-2.0
#
#    Unless required by applicable law or agreed to in writing, software
#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
#    License for the specific language governing permissions and limitations
#    under the License.


GITDIR['vmware-nsxlib']=$DEST/vmware-nsxlib
GITREPO['vmware-nsxlib']=${NSXLIB_REPO:-${GIT_BASE}/openstack/vmware-nsxlib.git}
GITBRANCH['vmware-nsxlib']=${NSXLIB_BRANCH:-master}

PYTHON='python'
if [[ $USE_PYTHON3 == "True" ]]; then
    PYTHON='python3'
fi

dir=${GITDIR['vmware-nsx']}/devstack

if [[ "$1" == "stack" && "$2" == "install" ]]; then
    if use_library_from_git 'vmware-nsxlib'; then
        git_clone_by_name 'vmware-nsxlib'
        setup_dev_lib 'vmware-nsxlib'
    fi
    setup_develop ${GITDIR['vmware-nsx']}
fi

if [[ $Q_PLUGIN == 'vmware_nsx_v' ]]; then
    source $dir/lib/vmware_nsx_v
    if [[ "$1" == "unstack" ]]; then
        db_connection=$(iniget $NEUTRON_CONF database connection)
        $PYTHON $dir/tools/nsxv_cleanup.py --vsm-ip ${NSXV_MANAGER_URI/https:\/\/} --user $NSXV_USER --password $NSXV_PASSWORD --db-connection $db_connection
    elif [[ "$1" == "clean" ]]; then
        if is_service_enabled q-svc || is_service_enabled neutron-api; then
            $PYTHON $dir/tools/nsxv_cleanup.py --vsm-ip ${NSXV_MANAGER_URI/https:\/\/} --user $NSXV_USER --password $NSXV_PASSWORD
        fi
    fi

elif [[ $Q_PLUGIN == 'vmware_nsx' ]]; then
    source $dir/lib/vmware_nsx
    if [[ "$1" == "stack" && "$2" == "post-config" ]]; then
        init_vmware_nsx
    elif [[ "$1" == "stack" && "$2" == "extra" ]]; then
        check_vmware_nsx
    elif [[ "$1" == "unstack" ]]; then
        stop_vmware_nsx
    fi
elif [[ $Q_PLUGIN == 'vmware_nsx_v3' ]]; then
    source $dir/lib/vmware_nsx_v3
    if [[ "$1" == "stack" && "$2" == "post-config" ]]; then
        init_vmware_nsx_v3
    elif [[ "$1" == "unstack" ]]; then
        db_connection=$(iniget $NEUTRON_CONF database connection)
        stop_vmware_nsx_v3
        # only clean up when q-svc (legacy support) or neutron-api is enabled
        if is_service_enabled q-svc || is_service_enabled neutron-api; then
            NSX_MANAGER=${NSX_MANAGERS:-$NSX_MANAGER}
            IFS=','
            NSX_MANAGER=($NSX_MANAGER)
            unset IFS
            $PYTHON $dir/tools/nsxv3_cleanup.py --mgr-ip $NSX_MANAGER --user $NSX_USER --password $NSX_PASSWORD --db-connection $db_connection
        fi
    elif [[ "$1" == 'clean' ]]; then
        if is_service_enabled q-svc || is_service_enabled neutron-api; then
            $PYTHON $dir/tools/nsxv3_cleanup.py --mgr-ip $NSX_MANAGER --user $NSX_USER --password $NSX_PASSWORD
        fi
    fi
elif [[ $Q_PLUGIN == 'vmware_nsx_tvd' ]]; then
    source $dir/lib/vmware_nsx_tvd
    if [[ "$1" == "stack" && "$2" == "post-config" ]]; then
        init_vmware_nsx_tvd
    elif [[ "$1" == "unstack" ]]; then
        db_connection=$(iniget $NEUTRON_CONF database connection)
        stop_vmware_nsx_tvd
        # only clean up when q-svc (legacy support) or neutron-api is enabled
        if is_service_enabled q-svc || is_service_enabled neutron-api; then
            NSX_MANAGER=${NSX_MANAGERS:-$NSX_MANAGER}
            IFS=','
            NSX_MANAGER=($NSX_MANAGER)
            unset IFS
            if [[ "$NSX_MANAGER" != "" ]]; then
                $PYTHON $dir/tools/nsxv3_cleanup.py --mgr-ip $NSX_MANAGER --user $NSX_USER --password $NSX_PASSWORD --db-connection $db_connection
            fi
            if [[ "$NSXV_MANAGER_URI" != "" ]]; then
                $PYTHON $dir/tools/nsxv_cleanup.py --vsm-ip ${NSXV_MANAGER_URI/https:\/\/} --user $NSXV_USER --password $NSXV_PASSWORD --db-connection $db_connection
            fi
        fi
    elif [[ "$1" == 'clean' ]]; then
        if is_service_enabled q-svc || is_service_enabled neutron-api; then
            if [[ "$NSX_MANAGER" != "" ]]; then
                $PYTHON $dir/tools/nsxv3_cleanup.py --mgr-ip $NSX_MANAGER --user $NSX_USER --password $NSX_PASSWORD
            fi
            if [[ "$NSXV_MANAGER_URI" != "" ]]; then
                $PYTHON $dir/tools/nsxv_cleanup.py --vsm-ip ${NSXV_MANAGER_URI/https:\/\/} --user $NSXV_USER --password $NSXV_PASSWORD
            fi
        fi
    fi
elif [[ $Q_PLUGIN == 'vmware_dvs' ]]; then
    source $dir/lib/vmware_dvs
elif [[ $Q_PLUGIN == 'vmware_nsx_p' ]]; then
    source $dir/lib/vmware_nsx_p
    if [[ "$1" == "stack" && "$2" == "post-config" ]]; then
        init_vmware_nsx_p
    elif [[ "$1" == "unstack" ]]; then
        db_connection=$(iniget $NEUTRON_CONF database connection)
        stop_vmware_nsx_p
        # only clean up when q-svc (legacy support) or neutron-api is enabled
        if is_service_enabled q-svc || is_service_enabled neutron-api; then
            NSX_POLICY=${NSX_POLICIES:-$NSX_POLICY}
            IFS=','
            NSX_POLICY=($NSX_POLICY)
            unset IFS
            $PYTHON $dir/tools/nsxp_cleanup.py --policy-ip $NSX_POLICY --user $NSX_USER --password $NSX_PASSWORD --db-connection $db_connection
        fi
    elif [[ "$1" == 'clean' ]]; then
        if is_service_enabled q-svc || is_service_enabled neutron-api; then
            $PYTHON $dir/tools/nsxp_cleanup.py --policy-ip $NSX_POLICY --user $NSX_USER --password $NSX_PASSWORD
        fi
    fi
fi

if [[ "$1" == "stack" && ("$2" == "install" || "$2" == "post-config") ]]; then
    if is_service_enabled q-fwaas-v2; then
        # make sure ml2 config exists for FWaaS-v2
        if [ ! -f "/etc/neutron/plugins/ml2/ml2_conf.ini" ]; then
            if [[ ! -f "/etc/neutron" ]]; then
                # Create /etc/neutron with the right ownership
                sudo install -d -o $STACK_USER $NEUTRON_CONF_DIR
            fi
            mkdir -p /etc/neutron/plugins/ml2
            touch /etc/neutron/plugins/ml2/ml2_conf.ini
        fi
    fi
fi