vmware-nsx/neutron/extensions/securitygroup.py
Akihiro MOTOKI 24e6ef332d Limit min<=max port check to TCP/UDP in secgroup rule
icmp_type and icmp_code are mapped to port_min_range and port_max_range
respectively. For ICMP there is no constraint between type and code.
Thus port range min<=max check should be enforced only for TCP and UDP.

Also makes sure that ICMP type/code are 0 to 255 (both inclusive).
Previously a value with 0 to 65535 were accepted for ICMP type/code.

Fixes bug 1197760
Fixes bug 1197769

Change-Id: I70aaf6e02fee461fa97dc254db906d9efa173669
2013-07-08 22:42:32 +09:00

334 lines
12 KiB
Python

# vim: tabstop=4 shiftwidth=4 softtabstop=4
# Copyright (c) 2012 OpenStack Foundation.
# All rights reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
from abc import ABCMeta
from abc import abstractmethod
from oslo.config import cfg
from neutron.api import extensions
from neutron.api.v2 import attributes as attr
from neutron.api.v2 import base
from neutron.common import exceptions as qexception
from neutron import manager
from neutron.openstack.common import uuidutils
from neutron import quota
# Security group Exceptions
class SecurityGroupInvalidPortRange(qexception.InvalidInput):
message = _("For TCP/UDP protocols, port_range_min must be "
"<= port_range_max")
class SecurityGroupInvalidPortValue(qexception.InvalidInput):
message = _("Invalid value for port %(port)s")
class SecurityGroupInvalidIcmpValue(qexception.InvalidInput):
message = _("Invalid value for ICMP %(field)s (%(attr)s) "
"%(value)s. It must be 0 to 255.")
class SecurityGroupInUse(qexception.InUse):
message = _("Security Group %(id)s in use.")
class SecurityGroupCannotRemoveDefault(qexception.InUse):
message = _("Removing default security group not allowed.")
class SecurityGroupCannotUpdateDefault(qexception.InUse):
message = _("Updating default security group not allowed.")
class SecurityGroupDefaultAlreadyExists(qexception.InUse):
message = _("Default security group already exists.")
class SecurityGroupRuleInvalidProtocol(qexception.InvalidInput):
message = _("Security group rule protocol %(protocol)s not supported. "
"Only protocol values %(values)s and their integer "
"representation (0 to 255) are supported.")
class SecurityGroupRulesNotSingleTenant(qexception.InvalidInput):
message = _("Multiple tenant_ids in bulk security group rule create"
" not allowed")
class SecurityGroupRemoteGroupAndRemoteIpPrefix(qexception.InvalidInput):
message = _("Only remote_ip_prefix or remote_group_id may "
"be provided.")
class SecurityGroupProtocolRequiredWithPorts(qexception.InvalidInput):
message = _("Must also specifiy protocol if port range is given.")
class SecurityGroupNotSingleGroupRules(qexception.InvalidInput):
message = _("Only allowed to update rules for "
"one security profile at a time")
class SecurityGroupNotFound(qexception.NotFound):
message = _("Security group %(id)s does not exist")
class SecurityGroupRuleNotFound(qexception.NotFound):
message = _("Security group rule %(id)s does not exist")
class DuplicateSecurityGroupRuleInPost(qexception.InUse):
message = _("Duplicate Security Group Rule in POST.")
class SecurityGroupRuleExists(qexception.InUse):
message = _("Security group rule already exists. Group id is %(id)s.")
def convert_protocol(value):
if value is None:
return
try:
val = int(value)
if val >= 0 and val <= 255:
return val
raise SecurityGroupRuleInvalidProtocol(
protocol=value, values=sg_supported_protocols)
except (ValueError, TypeError):
if value.lower() in sg_supported_protocols:
return value.lower()
raise SecurityGroupRuleInvalidProtocol(
protocol=value, values=sg_supported_protocols)
except AttributeError:
raise SecurityGroupRuleInvalidProtocol(
protocol=value, values=sg_supported_protocols)
def convert_ethertype_to_case_insensitive(value):
if isinstance(value, basestring):
for ethertype in sg_supported_ethertypes:
if ethertype.lower() == value.lower():
return ethertype
def convert_validate_port_value(port):
if port is None:
return port
try:
val = int(port)
except (ValueError, TypeError):
raise SecurityGroupInvalidPortValue(port=port)
if val >= 0 and val <= 65535:
return val
else:
raise SecurityGroupInvalidPortValue(port=port)
def convert_to_uuid_list_or_none(value_list):
if value_list is None:
return
for sg_id in value_list:
if not uuidutils.is_uuid_like(sg_id):
msg = _("'%s' is not an integer or uuid") % sg_id
raise qexception.InvalidInput(error_message=msg)
return value_list
def _validate_name_not_default(data, valid_values=None):
if data == "default":
raise SecurityGroupDefaultAlreadyExists()
attr.validators['type:name_not_default'] = _validate_name_not_default
sg_supported_protocols = [None, 'tcp', 'udp', 'icmp']
sg_supported_ethertypes = ['IPv4', 'IPv6']
# Attribute Map
RESOURCE_ATTRIBUTE_MAP = {
'security_groups': {
'id': {'allow_post': False, 'allow_put': False,
'validate': {'type:uuid': None},
'is_visible': True,
'primary_key': True},
'name': {'allow_post': True, 'allow_put': True,
'is_visible': True, 'default': '',
'validate': {'type:name_not_default': None}},
'description': {'allow_post': True, 'allow_put': True,
'is_visible': True, 'default': ''},
'tenant_id': {'allow_post': True, 'allow_put': False,
'required_by_policy': True,
'is_visible': True},
'security_group_rules': {'allow_post': False, 'allow_put': False,
'is_visible': True},
},
'security_group_rules': {
'id': {'allow_post': False, 'allow_put': False,
'validate': {'type:uuid': None},
'is_visible': True,
'primary_key': True},
'security_group_id': {'allow_post': True, 'allow_put': False,
'is_visible': True, 'required_by_policy': True},
'remote_group_id': {'allow_post': True, 'allow_put': False,
'default': None, 'is_visible': True},
'direction': {'allow_post': True, 'allow_put': True,
'is_visible': True,
'validate': {'type:values': ['ingress', 'egress']}},
'protocol': {'allow_post': True, 'allow_put': False,
'is_visible': True, 'default': None,
'convert_to': convert_protocol},
'port_range_min': {'allow_post': True, 'allow_put': False,
'convert_to': convert_validate_port_value,
'default': None, 'is_visible': True},
'port_range_max': {'allow_post': True, 'allow_put': False,
'convert_to': convert_validate_port_value,
'default': None, 'is_visible': True},
'ethertype': {'allow_post': True, 'allow_put': False,
'is_visible': True, 'default': 'IPv4',
'convert_to': convert_ethertype_to_case_insensitive,
'validate': {'type:values': sg_supported_ethertypes}},
'remote_ip_prefix': {'allow_post': True, 'allow_put': False,
'default': None, 'is_visible': True},
'tenant_id': {'allow_post': True, 'allow_put': False,
'required_by_policy': True,
'is_visible': True},
}
}
SECURITYGROUPS = 'security_groups'
EXTENDED_ATTRIBUTES_2_0 = {
'ports': {SECURITYGROUPS: {'allow_post': True,
'allow_put': True,
'is_visible': True,
'convert_to': convert_to_uuid_list_or_none,
'default': attr.ATTR_NOT_SPECIFIED}}}
security_group_quota_opts = [
cfg.IntOpt('quota_security_group',
default=10,
help=_('Number of security groups allowed per tenant,'
'-1 for unlimited')),
cfg.IntOpt('quota_security_group_rule',
default=100,
help=_('Number of security rules allowed per tenant, '
'-1 for unlimited')),
]
cfg.CONF.register_opts(security_group_quota_opts, 'QUOTAS')
class Securitygroup(extensions.ExtensionDescriptor):
"""Security group extension."""
@classmethod
def get_name(cls):
return "security-group"
@classmethod
def get_alias(cls):
return "security-group"
@classmethod
def get_description(cls):
return "The security groups extension."
@classmethod
def get_namespace(cls):
# todo
return "http://docs.openstack.org/ext/securitygroups/api/v2.0"
@classmethod
def get_updated(cls):
return "2012-10-05T10:00:00-00:00"
@classmethod
def get_resources(cls):
"""Returns Ext Resources."""
my_plurals = [(key, key[:-1]) for key in RESOURCE_ATTRIBUTE_MAP.keys()]
attr.PLURALS.update(dict(my_plurals))
exts = []
plugin = manager.NeutronManager.get_plugin()
for resource_name in ['security_group', 'security_group_rule']:
collection_name = resource_name.replace('_', '-') + "s"
params = RESOURCE_ATTRIBUTE_MAP.get(resource_name + "s", dict())
quota.QUOTAS.register_resource_by_name(resource_name)
controller = base.create_resource(collection_name,
resource_name,
plugin, params, allow_bulk=True,
allow_pagination=True,
allow_sorting=True)
ex = extensions.ResourceExtension(collection_name,
controller,
attr_map=params)
exts.append(ex)
return exts
def get_extended_resources(self, version):
if version == "2.0":
return dict(EXTENDED_ATTRIBUTES_2_0.items() +
RESOURCE_ATTRIBUTE_MAP.items())
else:
return {}
class SecurityGroupPluginBase(object):
__metaclass__ = ABCMeta
@abstractmethod
def create_security_group(self, context, security_group):
pass
@abstractmethod
def update_security_group(self, context, id, security_group):
pass
@abstractmethod
def delete_security_group(self, context, id):
pass
@abstractmethod
def get_security_groups(self, context, filters=None, fields=None,
sorts=None, limit=None, marker=None,
page_reverse=False):
pass
@abstractmethod
def get_security_group(self, context, id, fields=None):
pass
@abstractmethod
def create_security_group_rule(self, context, security_group_rule):
pass
@abstractmethod
def delete_security_group_rule(self, context, id):
pass
@abstractmethod
def get_security_group_rules(self, context, filters=None, fields=None,
sorts=None, limit=None, marker=None,
page_reverse=False):
pass
@abstractmethod
def get_security_group_rule(self, context, id, fields=None):
pass