vmware-nsx/etc/l3_agent.ini
gongysh 32a029bc5e Allow DHCP and L3 agents to choose if they should report state
Bug #1143195
blueprint quantum-scheduler

Change-Id: Iba7bf82d7130462be4dda6c1c5f9a0fc5633707d
2013-03-04 17:09:28 +08:00

54 lines
1.9 KiB
INI

[DEFAULT]
# Show debugging output in log (sets DEBUG log level output)
# debug = True
# L3 requires that an interface driver be set. Choose the one that best
# matches your plugin.
# OVS based plugins (OVS, Ryu, NEC) that supports L3 agent
interface_driver = quantum.agent.linux.interface.OVSInterfaceDriver
# OVS based plugins(Ryu, NEC) that use OVS
# as OpenFlow switch and check port status
#ovs_use_veth = True
# LinuxBridge
#interface_driver = quantum.agent.linux.interface.BridgeInterfaceDriver
# Allow overlapping IP (Must have kernel build with CONFIG_NET_NS=y and
# iproute2 package that supports namespaces).
# use_namespaces = True
# If use_namespaces is set as False then the agent can only configure one router.
# This is done by setting the specific router_id.
# router_id =
# Each L3 agent can be associated with at most one external network. This
# value should be set to the UUID of that external network. If empty,
# the agent will enforce that only a single external networks exists and
# use that external network id
# gateway_external_network_id =
# Indicates that this L3 agent should also handle routers that do not have
# an external network gateway configured. This option should be True only
# for a single agent in a Quantum deployment, and may be False for all agents
# if all routers must have an external network gateway
# handle_internal_only_routers = True
# Name of bridge used for external network traffic. This should be set to
# empty value for the linux bridge
# external_network_bridge = br-ex
# TCP Port used by Quantum metadata server
# metadata_port = 9697
# Send this many gratuitous ARPs for HA setup. Set it below or equal to 0
# to disable this feature.
# send_arp_for_ha = 3
# seconds between re-sync routers' data if needed
# periodic_interval = 40
# seconds to start to sync routers' data after
# starting agent
# periodic_fuzzy_delay = 5