Support multi-arch image builds with docker buildx

Docker has experimental support for building multi-arch
container images with a buildx command. Currently it only
supports pushing to a registry after running and the images
don't end up in the local docker images list. To work around
that, push to the buildset registry then pull back. This
is the inverse of the normal case where we build, then
retag, then push. The end result should be the same.

Change-Id: I6a4c4f9e262add909d2d5c2efa33ec69b9d9364a

roles/build-docker-image/common.rst

@@ -136,4 +136,15 @@ using this role.
 
       A list of labels to attach to the built image, in the form of "key=value".
 
+   .. zuul:rolevar:: arch
+      :type: list
+      :default: []
+
+      A list of architectures to build on. When enabling this on any
+      image, all of them will be built with ``docker buildx``.
+
+      Valid values are ``linux/amd64``, ``linux/arm64``, ``linux/riscv64``,
+      ``linux/ppc64le``, ``linux/s390x``, ``linux/386``,
+      ``linux/arm/v7``, ``linux/arm/v6``.
+
 .. _anchors: https://yaml.org/spec/1.2/spec.html#&%20anchor//

roles/build-docker-image/tasks/build.yaml

@@ -1,49 +1,20 @@
-- name: Check sibling directory
-  stat:
-    path: '{{ zuul_work_dir }}/{{ item.context }}/.zuul-siblings'
-  register: _dot_zuul_siblings
-
-# This should have been cleaned up; multiple builds may specify
-# different siblings to include so we need to start fresh.
-- name: Check for clean build
-  assert:
-    that: not _dot_zuul_siblings.stat.exists
-
-- name: Create sibling source directory
-  file:
-    path: '{{ zuul_work_dir }}/{{ item.context }}/.zuul-siblings'
-    state: directory
-    mode: 0755
-  when: item.siblings is defined
-
-# NOTE(ianw): could use recursive copy: with remote_src, but it's
-# Ansible 2.8 only.  take the simple approach.
-- name: Copy sibling source directories
-  command:
-    cmd: 'cp --parents -r {{ zj_sibling }} {{ ansible_user_dir }}/{{ zuul_work_dir }}/{{ item.context }}/.zuul-siblings'
-    chdir: '~/src'
-  loop: '{{ item.siblings }}'
-  loop_control:
-    loop_var: zj_sibling
-  when: item.siblings is defined
-
 - name: Build a docker image
   command: >-
-    docker build {{ item.path | default('.') }} -f {{ item.dockerfile | default(docker_dockerfile) }}
+    docker build {{ zj_image.path | default('.') }} -f {{ zj_image.dockerfile | default(docker_dockerfile) }}
-    {% if item.target | default(false) -%}
+    {% if zj_image.target | default(false) -%}
-      --target {{ item.target }}
+      --target {{ zj_image.target }}
     {% endif -%}
-    {% for build_arg in item.build_args | default([]) -%}
+    {% for build_arg in zj_image.build_args | default([]) -%}
       --build-arg {{ build_arg }}
     {% endfor -%}
-    {% if item.siblings | default(false) -%}
+    {% if zj_image.siblings | default(false) -%}
-      --build-arg "ZUUL_SIBLINGS={{ item.siblings | join(' ') }}"
+      --build-arg "ZUUL_SIBLINGS={{ zj_image.siblings | join(' ') }}"
     {% endif -%}
-    {% for tag in item.tags | default(['latest']) -%}
+    {% for tag in zj_image.tags | default(['latest']) -%}
       {% if zuul.change | default(false) -%}
-        --tag {{ item.repository }}:change_{{ zuul.change }}_{{ tag }}
+        --tag {{ zj_image.repository }}:change_{{ zuul.change }}_{{ tag }}
       {% endif -%}
-      --tag {{ item.repository }}:{{ tag }}
+      --tag {{ zj_image.repository }}:{{ tag }}
     {% endfor -%}
     {% for label in zj_image.labels | default([]) -%}
       --label "{{ label }}"
@@ -51,10 +22,4 @@
     --label "org.zuul-ci.change={{ zuul.change }}"
     --label "org.zuul-ci.change_url={{ zuul.change_url }}"
   args:
-    chdir: "{{ zuul_work_dir }}/{{ item.context }}"
+    chdir: "{{ zuul_work_dir }}/{{ zj_image.context }}"
-
-- name: Cleanup sibling source directory
-  file:
-    path: '{{ zuul_work_dir }}/.zuul-siblings'
-    state: absent
-

roles/build-docker-image/tasks/buildx.yaml

@@ -0,0 +1,43 @@
+- name: Build a docker image
+  command: >-
+    docker buildx build {{ zj_image.path | default('.') }} -f {{ zj_image.dockerfile | default(docker_dockerfile) }}
+      --platform={{ zj_image.arch | join(',') }}
+    {% if zj_image.target | default(false) -%}
+      --target {{ zj_image.target }}
+    {% endif -%}
+    {% for build_arg in zj_image.build_args | default([]) -%}
+      --build-arg {{ build_arg }}
+    {% endfor -%}
+    {% if zj_image.siblings | default(false) -%}
+      --build-arg "ZUUL_SIBLINGS={{ zj_image.siblings | join(' ') }}"
+    {% endif -%}
+    {% for tag in zj_image.tags | default(['latest']) -%}
+      {% if zuul.change | default(false) -%}
+        --tag {{ buildset_registry_alias }}:{{ buildset_registry.port }}/{{ zj_image.repository }}:change_{{ zuul.change }}_{{ tag }}
+      {% endif -%}
+      --tag {{ buildset_registry_alias }}:{{ buildset_registry.port }}/{{ zj_image.repository }}:{{ tag }}
+    {% endfor -%}
+    {% for label in zj_image.labels | default([]) -%}
+      --label "{{ label }}"
+    {% endfor %}
+    --label "org.zuul-ci.change={{ zuul.change }}"
+    --label "org.zuul-ci.change_url={{ zuul.change_url }}"
+    --push
+  args:
+    chdir: "{{ zuul_work_dir }}/{{ zj_image.context }}"
+  environment:
+    DOCKER_CLI_EXPERIMENTAL: enabled
+
+- name: Pull images from buildset registry
+  command: >-
+    docker pull {{ buildset_registry_alias }}:{{ buildset_registry.port }}/{{ zj_image.repository }}:{{ zj_image_tag }}
+  loop: "{{ zj_image.tags | default(['latest']) }}"
+  loop_control:
+    loop_var: zj_image_tag
+
+- name: Tag image for local registry
+  command: >-
+    docker tag {{ buildset_registry_alias }}:{{ buildset_registry.port }}/{{ zj_image.repository }}:{{ zj_image_tag }} {{ zj_image.repository }}:{{ zj_image_tag }}
+  loop: "{{ zj_image.tags | default(['latest']) }}"
+  loop_control:
+    loop_var: zj_image_tag

roles/build-docker-image/tasks/main.yaml

@@ -5,9 +5,11 @@
     buildset_registry: "{{ (lookup('file', zuul.executor.work_root + '/results.json') | from_json)['buildset_registry'] }}"
   ignore_errors: true
 
-- name: Build docker images
+- name: Set up siblings
-  include_tasks: build.yaml
+  include_tasks: siblings.yaml
   loop: "{{ docker_images }}"
+  loop_control:
+    loop_var: zj_image
 
 # Docker doesn't understand docker push [1234:5678::]:5000/image/path:tag
 # so we set up /etc/hosts with a registry alias name to support ipv6 and 4.
@@ -28,10 +30,49 @@
   set_fact:
     buildset_registry_alias: "{{ buildset_registry.host }}"
   when: buildset_registry is defined and not ( buildset_registry.host | ipaddr )
-# Push each image.
+
-- name: Push image to buildset registry
+- name: Determine if we need to use buildx or normal build
+  set_fact:
+    use_buildx: "{{ docker_images | selectattr('arch', 'defined') | list }}"
+
+- name: Normal docker block
+  when: not use_buildx
+  block:
+
+    - name: Build docker images
+      include_tasks: build.yaml
+      loop: "{{ docker_images }}"
+      loop_control:
+        loop_var: zj_image
+
+    # Push each image.
+    - name: Push image to buildset registry
       when: buildset_registry is defined
       include_tasks: push.yaml
       loop: "{{ docker_images }}"
       loop_control:
-    loop_var: image
+        loop_var: zj_image
+
+- name: Buildx block
+  when: use_buildx
+  block:
+
+    - name: Assert buildset registry is defined for buildx
+      assert:
+        that:
+           - buildset_registry is defined
+        fail_msg: "Building multi-arch images requires a buildset registry"
+
+    - name: Set up buildx builders
+      include_tasks: setup-buildx.yaml
+
+    - name: Build and push each image using buildx.
+      include_tasks: buildx.yaml
+      loop: "{{ docker_images }}"
+      loop_control:
+        loop_var: zj_image
+
+- name: Cleanup sibling source directory
+  file:
+    path: '{{ zuul_work_dir }}/.zuul-siblings'
+    state: absent

roles/build-docker-image/tasks/push.yaml

@@ -1,12 +1,12 @@
 - name: Tag image for buildset registry
   command: >-
-    docker tag {{ image.repository }}:{{ zj_image_tag }} {{ buildset_registry_alias }}:{{ buildset_registry.port }}/{{ image.repository }}:{{ zj_image_tag }}
+    docker tag {{ zj_image.repository }}:{{ zj_image_tag }} {{ buildset_registry_alias }}:{{ buildset_registry.port }}/{{ zj_image.repository }}:{{ zj_image_tag }}
-  loop: "{{ image.tags | default(['latest']) }}"
+  loop: "{{ zj_image.tags | default(['latest']) }}"
   loop_control:
     loop_var: zj_image_tag
 - name: Push tag to buildset registry
   command: >-
-    docker push {{ buildset_registry_alias }}:{{ buildset_registry.port }}/{{ image.repository }}:{{ zj_image_tag }}
+    docker push {{ buildset_registry_alias }}:{{ buildset_registry.port }}/{{ zj_image.repository }}:{{ zj_image_tag }}
-  loop: "{{ image.tags | default(['latest']) }}"
+  loop: "{{ zj_image.tags | default(['latest']) }}"
   loop_control:
     loop_var: zj_image_tag

roles/build-docker-image/tasks/setup-buildx.yaml

@@ -0,0 +1,56 @@
+- name: Write buildkit.toml file
+  template:
+    dest: /tmp/buildkitd.toml
+    src: buildkitd.toml.j2
+
+- name: Run binfmt container
+  command: docker run --rm --privileged docker/binfmt:a7996909642ee92942dcd6cff44b9b95f08dad64
+  environment:
+    DOCKER_CLI_EXPERIMENTAL: enabled
+
+- name: Create builder
+  command: docker buildx create --name mybuilder --driver-opt network=host --config /tmp/buildkitd.toml
+  environment:
+    DOCKER_CLI_EXPERIMENTAL: enabled
+
+- name: Use builder
+  command: docker buildx use mybuilder
+  environment:
+    DOCKER_CLI_EXPERIMENTAL: enabled
+
+- name: Bootstrap builder
+  command: docker buildx inspect --bootstrap
+  environment:
+    DOCKER_CLI_EXPERIMENTAL: enabled
+
+- name: Copy buildset registry TLS cert into worker container
+  command: "docker cp {{ ca_dir }}/buildset-registry.crt buildx_buildkit_mybuilder0:/usr/local/share/ca-certificates"
+
+- name: Update CA certs in worker container
+  command: docker exec buildx_buildkit_mybuilder0 update-ca-certificates
+
+- name: Copy /etc/hosts for editing
+  command: docker cp buildx_buildkit_mybuilder0:/etc/hosts /tmp/mybuilder-hosts
+
+# Docker buildx has its own /etc/hosts in the builder image.
+- name: Configure /etc/hosts for buildset_registry to workaround docker not understanding ipv6 addresses
+  become: yes
+  lineinfile:
+    path: /tmp/mybuilder-hosts
+    state: present
+    regex: "^{{ buildset_registry.host }}\tzuul-jobs.buildset-registry$"
+    line: "{{ buildset_registry.host }}\tzuul-jobs.buildset-registry"
+    insertafter: EOF
+  when: buildset_registry is defined and buildset_registry.host | ipaddr
+
+- name: Unmount the /etc/hosts mount
+  command: docker exec buildx_buildkit_mybuilder0 umount /etc/hosts
+
+# NOTE(mordred) This is done in two steps. Even though we've unmounted /etc/hosts
+# in the previous step, when we try to copy the file back directly, we get:
+#   unlinkat /etc/hosts: device or resource busy
+- name: Copy modified hosts file back in
+  command: docker cp /tmp/mybuilder-hosts buildx_buildkit_mybuilder0:/etc/new-hosts
+
+- name: Copy modified hosts file into place
+  command: docker exec buildx_buildkit_mybuilder0 cp /etc/new-hosts /etc/hosts

roles/build-docker-image/tasks/siblings.yaml

@@ -0,0 +1,28 @@
+- name: Check sibling directory
+  stat:
+    path: '{{ zuul_work_dir }}/{{ zj_image.context }}/.zuul-siblings'
+  register: _dot_zuul_siblings
+
+# This should have been cleaned up; multiple builds may specify
+# different siblings to include so we need to start fresh.
+- name: Check for clean build
+  assert:
+    that: not _dot_zuul_siblings.stat.exists
+
+- name: Create sibling source directory
+  file:
+    path: '{{ zuul_work_dir }}/{{ zj_image.context }}/.zuul-siblings'
+    state: directory
+    mode: 0755
+  when: zj_image.siblings is defined
+
+# NOTE(ianw): could use recursive copy: with remote_src, but it's
+# Ansible 2.8 only.  take the simple approach.
+- name: Copy sibling source directories
+  command:
+    cmd: 'cp --parents -r {{ zj_sibling }} {{ ansible_user_dir }}/{{ zuul_work_dir }}/{{ zj_image.context }}/.zuul-siblings'
+    chdir: '~/src'
+  loop: '{{ zj_image.siblings }}'
+  loop_control:
+    loop_var: zj_sibling
+  when: zj_image.siblings is defined

roles/build-docker-image/templates/buildkitd.toml.j2

@@ -0,0 +1,8 @@
+[registry."docker.io"]
+  mirrors = ["{{ buildset_registry_alias }}:{{ buildset_registry.port }}"]
+
+[registry."quay.io"]
+  mirrors = ["{{ buildset_registry_alias }}:{{ buildset_registry.port }}/quay.io"]
+
+[registry."gcr.io"]
+  mirrors = ["{{ buildset_registry_alias }}:{{ buildset_registry.port }}/gcr.io"]

roles/build-docker-image/vars/CentOS.yaml

@@ -0,0 +1,2 @@
+ca_dir: /etc/pki/ca-trust/source/anchors
+ca_command: update-ca-trust

roles/build-docker-image/vars/default.yaml

@@ -0,0 +1,2 @@
+ca_dir: /usr/local/share/ca-certificates
+ca_command: update-ca-certificates

roles/run-buildset-registry/tasks/main.yaml

@@ -50,7 +50,7 @@
     --publish="1{{ buildset_registry_port }}:5000"
     --volume="{{ buildset_registry_root }}/tls:/tls"
     --volume="{{ buildset_registry_root }}/conf:/conf"
-    docker.io/zuul/zuul-registry:latest
+    docker.io/zuul/zuul-registry:latest zuul-registry -d
 
 # Start a socat tunnel to the buildset registry to work around
 # https://github.com/containers/libpod/issues/4311

test-playbooks/registry/docker-siblings/Dockerfile

@@ -1,6 +1,7 @@
-FROM docker.io/library/debian:testing
+FROM docker.io/upstream/image
 ARG ZUUL_SIBLINGS=""
 RUN echo "Zuul siblings: ${ZUUL_SIBLINGS}"
+RUN cp /test-nonce /test-nonce-is-there
 COPY .zuul-siblings/opendev.org/project/fake-sibling/file /target
 COPY .zuul-siblings/openstack.org/project/fake-sibling/file /target
 CMD echo "Zuul container test"; sleep infinity

test-playbooks/registry/docker/Dockerfile

@@ -1,2 +1,3 @@
 FROM docker.io/library/debian:testing
+RUN touch "/test-nonce"
 CMD echo "Zuul container test"; sleep infinity

test-playbooks/registry/test-registry.yaml

@@ -134,12 +134,20 @@
       include_role:
         name: "build-{{ (container_command == 'docker') | ternary('docker', 'container') }}-image"
       vars:
-        docker_images:
+        _normal_docker_images:
           - context: test-playbooks/registry/docker-siblings
             repository: downstream/image
             siblings:
               - opendev.org/project/fake-sibling
               - openstack.org/project/fake-sibling
+        _arch_docker_images:
+          - context: test-playbooks/registry/docker-siblings
+            repository: downstream/image
+            siblings:
+              - opendev.org/project/fake-sibling
+              - openstack.org/project/fake-sibling
+            arch: ['linux/amd64', 'linux/arm64']
+        docker_images: "{{ multiarch | ternary(_arch_docker_images, _normal_docker_images) }}"
         container_images: "{{ docker_images }}"
 - hosts: executor
   name: Test pushing to the intermediate registry
@@ -150,9 +158,14 @@
       include_role:
         name: push-to-intermediate-registry
       vars:
-        docker_images:
+        _normal_docker_images:
           - context: playbooks/registry/docker
             repository: downstream/image
+        _arch_docker_images:
+          - context: playbooks/registry/docker
+            repository: downstream/image
+            arch: ['linux/amd64', 'linux/arm64']
+        docker_images: "{{ multiarch | ternary(_arch_docker_images, _normal_docker_images) }}"
         container_images: "{{ docker_images }}"
 
 # And finally an external verification step.

zuul-tests.d/container-roles-jobs.yaml

@@ -82,6 +82,38 @@
     post-run: test-playbooks/registry/test-registry-post.yaml
     vars:
       container_command: docker
+      multiarch: false
+    nodeset:
+      nodes:
+        - name: intermediate-registry
+          label: ubuntu-bionic
+        - name: executor
+          label: ubuntu-bionic
+        - name: builder
+          label: ubuntu-bionic
+
+- job:
+    name: zuul-jobs-test-registry-docker-multiarch
+    description: |
+      Test the intermediate registry roles with multiarch.
+
+      This job tests changes to the intermediate registry roles.  It
+      is not meant to be used directly but rather run on changes to
+      roles in the zuul-jobs repo.
+    files:
+      - roles/pull-from-intermediate-registry/.*
+      - roles/push-to-intermediate-registry/.*
+      - roles/ensure-docker/.*
+      - roles/build-docker-image/.*
+      - roles/run-buildset-registry/.*
+      - roles/use-buildset-registry/.*
+      - test-playbooks/registry/.*
+    pre-run: test-playbooks/registry/test-registry-pre.yaml
+    run: test-playbooks/registry/test-registry.yaml
+    post-run: test-playbooks/registry/test-registry-post.yaml
+    vars:
+      container_command: docker
+      multiarch: true
     nodeset:
       nodes:
         - name: intermediate-registry
@@ -112,6 +144,7 @@
     post-run: test-playbooks/registry/test-registry-post.yaml
     vars:
       container_command: podman
+      multiarch: false
     nodeset:
       nodes:
         - name: intermediate-registry
@@ -311,6 +344,7 @@
         - zuul-jobs-test-ensure-docker-ubuntu-bionic
         - zuul-jobs-test-ensure-docker-ubuntu-xenial
         - zuul-jobs-test-registry-docker
+        - zuul-jobs-test-registry-docker-multiarch
         - zuul-jobs-test-registry-podman
         - zuul-jobs-test-registry-buildset-registry
         - zuul-jobs-test-registry-buildset-registry-k8s-docker