Build jitsi-meet images

So that we can run jitsi-meet with local modifications, build our
own container images.  This builds the base, prosody, and web images
from the docker-jitsi-meet project.  That project has distinct
Dockerfiles for each image, but for simplicity, this change combines
them into a single multi-stage Dockerfile.  The minor stylistic
differences between the different sections are a result of that, and
are intentional in order to minimise the delta from the source material.

Again, for simplicity, this change does not publish the base image
since it is not anticipated that we will run this build often.  If we do,
we could split this back out.

The upstream images are based on pre-built debian packages hosted by
the jitsi project.  Since our goal is to modify the software, we will
need to rebuild the debian packages as well.  This adds a new builder
image that is used to build the debian packages initially.

The docker-jitsi-meet project also has Dockerfiles for several more
images, but since the immediate need is only for the "web" image (built
from the "jitsi-meet" project), we only build that image and the "prosody"
image (not strictly necessary, but it is also a product of the "jisti-meet"
repository, so it seems a good practice to build it as well).

Change-Id: Ib3177ebfe2b8732a3522a1fa101fe95586dd1e1b
This commit is contained in:
James E. Blair 2020-03-23 09:52:15 -07:00
parent 8b093dacd5
commit c79c11c2b7
29 changed files with 1559 additions and 0 deletions

View File

@ -145,6 +145,39 @@
vars: *gitea_vars vars: *gitea_vars
files: *gitea_files files: *gitea_files
# Jitsi-meet jobs
- job:
name: system-config-build-image-jitsi-meet
description: Build jitsi-meet images
parent: system-config-build-image
provides: jitsi-meet-container-image
vars: &jitsi-meet_vars
docker_images:
- context: docker/jitsi-meet
target: web
repository: opendevorg/jitsi-meet-web
- context: docker/jitsi-meet
target: prosody
repository: opendevorg/jitsi-meet-prosody
files: &jitsi-meet_files
- docker/jitsi-meet/.*
- job:
name: system-config-upload-image-jitsi-meet
description: Build and upload a jitsi-meet image.
parent: system-config-upload-image
requires: python-base-container-image
provides: jitsi-meet-container-image
vars: *jitsi-meet_vars
files: *jitsi-meet_files
- job:
name: system-config-promote-image-jitsi-meet
description: Promote a previously published jitsi-meet image to latest.
parent: system-config-promote-image
vars: *jitsi-meet_vars
files: *jitsi-meet_files
# Haproxy-statsd jobs # Haproxy-statsd jobs
- job: - job:
name: system-config-build-image-haproxy-statsd name: system-config-build-image-haproxy-statsd
@ -1450,6 +1483,7 @@
- name: system-config-build-image-jinja-init - name: system-config-build-image-jinja-init
soft: true soft: true
- system-config-build-image-gitea - system-config-build-image-gitea
- system-config-build-image-jitsi-meet
- system-config-build-image-haproxy-statsd: - system-config-build-image-haproxy-statsd:
dependencies: dependencies:
- name: opendev-buildset-registry - name: opendev-buildset-registry
@ -1500,6 +1534,7 @@
- name: system-config-upload-image-jinja-init - name: system-config-upload-image-jinja-init
soft: true soft: true
- system-config-upload-image-gitea - system-config-upload-image-gitea
- system-config-upload-image-jitsi-meet
- system-config-upload-image-haproxy-statsd: - system-config-upload-image-haproxy-statsd:
dependencies: dependencies:
- name: opendev-buildset-registry - name: opendev-buildset-registry
@ -1512,6 +1547,7 @@
- system-config-promote-image-jinja-init - system-config-promote-image-jinja-init
- system-config-promote-image-gitea-init - system-config-promote-image-gitea-init
- system-config-promote-image-gitea - system-config-promote-image-gitea
- system-config-promote-image-jitsi-meet
- system-config-promote-image-haproxy-statsd - system-config-promote-image-haproxy-statsd
- system-config-promote-image-python-base - system-config-promote-image-python-base
- system-config-promote-image-python-builder - system-config-promote-image-python-builder

View File

@ -0,0 +1,132 @@
# Based on https://github.com/jitsi/docker-jitsi-meet/
# Licensed under the ASL v2.
FROM docker.io/library/debian:stretch-slim as build
ENV DEBIAN_FRONTEND=noninteractive
RUN \
mkdir -p /usr/share/man/man1/ && \
apt-get update && \
apt-get dist-upgrade -y && \
apt-get install -y apt-transport-https \
apt-utils ca-certificates gnupg git build-essential fakeroot \
devscripts openjdk-8-jre-headless openjdk-8-jdk-headless maven && \
curl -sS https://deb.nodesource.com/gpgkey/nodesource.gpg.key | \
apt-key add - && \
echo "deb https://deb.nodesource.com/node_10.x stretch main" | \
tee /etc/apt/sources.list.d/nodesource.list && \
apt-get update && \
apt-get install -y nodejs npm && \
echo "deb http://ftp.debian.org/debian stretch-backports main" > /etc/apt/sources.list.d/backports.list && \
apt-get update && \
apt-get install -y -t stretch-backports debhelper && \
rm -rf /var/lib/apt/lists/
RUN git clone https://github.com/jitsi/jitsi-meet
RUN \
cd jitsi-meet && \
npm install && \
make && \
debuild -b -uc -us
######################################################################
FROM docker.io/library/debian:stretch-slim as base
ADD https://github.com/just-containers/s6-overlay/releases/download/v1.21.4.0/s6-overlay-amd64.tar.gz /tmp/s6-overlay.tar.gz
ADD https://github.com/subchen/frep/releases/download/v1.3.5/frep-1.3.5-linux-amd64 /usr/bin/frep
COPY base/rootfs /
RUN \
tar xfz /tmp/s6-overlay.tar.gz -C / && \
rm -f /tmp/*.tar.gz && \
apt-dpkg-wrap apt-get update && \
apt-dpkg-wrap apt-get install -y apt-transport-https apt-utils ca-certificates gnupg && \
echo "deb http://ftp.debian.org/debian stretch-backports main" > /etc/apt/sources.list.d/backports.list && \
apt-dpkg-wrap apt-get dist-upgrade -y && \
apt-cleanup && \
chmod +x /usr/bin/frep
RUN \
[ "$JITSI_RELEASE" = "unstable" ] && \
apt-dpkg-wrap apt-get update && \
apt-dpkg-wrap apt-get install -y jq procps curl vim iputils-ping net-tools && \
apt-cleanup || \
true
ENTRYPOINT [ "/init" ]
######################################################################
FROM base as web
COPY --from=build /*.deb /output/
RUN \
apt-dpkg-wrap apt-get update && \
apt-dpkg-wrap apt-get install -y cron nginx-extras && \
dpkg -i /output/jitsi-meet-web*.deb &&\
apt-dpkg-wrap apt-get install -y -t stretch-backports certbot && \
apt-cleanup && \
rm -fr /output && \
rm -f /etc/nginx/conf.d/default.conf && \
rm -f /usr/share/jitsi-meet/interface_config.js
COPY web/rootfs/ /
EXPOSE 80 443
VOLUME ["/config", "/etc/letsencrypt"]
######################################################################
FROM base as prosody
COPY --from=build /*.deb /output/
RUN \
apt-dpkg-wrap apt-get update \
&& apt-dpkg-wrap apt-get install -t stretch-backports -y \
prosody \
liblua5.2-dev \
sasl2-bin \
libsasl2-modules-ldap \
libsasl2-dev \
libssl1.0-dev \
lua-basexx \
lua-ldap \
luarocks \
git \
gcc \
patch \
&& luarocks install cyrussasl 1.1.0-1 \
&& luarocks install lua-cjson 2.1.0-1 \
&& luarocks install luajwtjitsi 1.3-7 \
&& luarocks install net-url 0.9-1 \
&& apt-dpkg-wrap apt-get remove -t stretch-backports -y \
git \
gcc \
luarocks \
libsasl2-dev \
libssl1.0-dev \
liblua5.2-dev \
&& apt-cleanup \
&& rm -rf /etc/prosody /var/cache/apt
RUN \
apt-dpkg-wrap apt-get update \
&& apt-dpkg-wrap apt-get install -y libssl-dev \
&& dpkg -x /output/jitsi-meet-prosody*.deb /tmp \
&& mv /tmp/usr/share/jitsi-meet/prosody-plugins /prosody-plugins \
&& apt-cleanup \
&& rm -fr /output \
&& rm -rf /tmp/usr /var/cache/apt
RUN \
sed -i s/hook/hook_global/g /prosody-plugins/mod_auth_token.lua \
&& patch -d /usr/lib/prosody/modules/muc -p0 < /prosody-plugins/muc_owner_allow_kick.patch
COPY prosody/rootfs/ /
EXPOSE 5222 5269 5347 5280
VOLUME ["/config", "/prosody-plugins-custom"]

3
docker/jitsi-meet/README Normal file
View File

@ -0,0 +1,3 @@
All files in and below this directory are from
https://github.com/jitsi/docker-jitsi-meet/
Licensed under the ASL v2.

View File

@ -0,0 +1,2 @@
APT::Install-Recommends "false";
APT::Install-Suggests "false";

View File

@ -0,0 +1,6 @@
#!/usr/bin/with-contenv sh
if [ $TZ ]; then
[ -f /usr/share/zoneinfo/$TZ ] && cp /usr/share/zoneinfo/$TZ /etc/localtime || echo "WARNING: $TZ is not a valid time zone."
[ -f /usr/share/zoneinfo/$TZ ] && echo "$TZ" > /etc/timezone
fi

View File

@ -0,0 +1,3 @@
#!/bin/sh
rm -rf /var/lib/apt/lists/

View File

@ -0,0 +1,8 @@
#!/bin/sh
export LC_ALL=C
export DEBIAN_FRONTEND=noninteractive
bin=$1
shift
exec "$bin" "$@"

View File

@ -0,0 +1,4 @@
#!/bin/bash
exec frep $1:-

View File

@ -0,0 +1,103 @@
admins = { "{{ .Env.JICOFO_AUTH_USER }}@{{ .Env.XMPP_AUTH_DOMAIN }}" }
plugin_paths = { "/prosody-plugins/", "/prosody-plugins-custom" }
http_default_host = "{{ .Env.XMPP_DOMAIN }}"
{{ $ENABLE_AUTH := .Env.ENABLE_AUTH | default "0" | toBool }}
{{ $AUTH_TYPE := .Env.AUTH_TYPE | default "internal" }}
{{ $JWT_ASAP_KEYSERVER := .Env.JWT_ASAP_KEYSERVER | default "" }}
{{ $JWT_ALLOW_EMPTY := .Env.JWT_ALLOW_EMPTY | default "0" | toBool }}
{{ $JWT_AUTH_TYPE := .Env.JWT_AUTH_TYPE | default "token" }}
{{ $JWT_TOKEN_AUTH_MODULE := .Env.JWT_TOKEN_AUTH_MODULE | default "token_verification" }}
{{ if and $ENABLE_AUTH (eq $AUTH_TYPE "jwt") .Env.JWT_ACCEPTED_ISSUERS }}
asap_accepted_issuers = { "{{ join "\",\"" (splitList "," .Env.JWT_ACCEPTED_ISSUERS) }}" }
{{ end }}
{{ if and $ENABLE_AUTH (eq $AUTH_TYPE "jwt") .Env.JWT_ACCEPTED_AUDIENCES }}
asap_accepted_audiences = { "{{ join "\",\"" (splitList "," .Env.JWT_ACCEPTED_AUDIENCES) }}" }
{{ end }}
VirtualHost "{{ .Env.XMPP_DOMAIN }}"
{{ if $ENABLE_AUTH }}
{{ if eq $AUTH_TYPE "jwt" }}
authentication = "{{ $JWT_AUTH_TYPE }}"
app_id = "{{ .Env.JWT_APP_ID }}"
app_secret = "{{ .Env.JWT_APP_SECRET }}"
allow_empty_token = {{ if $JWT_ALLOW_EMPTY }}true{{ else }}false{{ end }}
{{ if $JWT_ASAP_KEYSERVER }}
asap_key_server = "{{ .Env.JWT_ASAP_KEYSERVER }}"
{{ end }}
{{ else if eq $AUTH_TYPE "ldap" }}
authentication = "cyrus"
cyrus_application_name = "xmpp"
allow_unencrypted_plain_auth = true
{{ else if eq $AUTH_TYPE "internal" }}
authentication = "internal_plain"
{{ end }}
{{ else }}
authentication = "anonymous"
{{ end }}
ssl = {
key = "/config/certs/{{ .Env.XMPP_DOMAIN }}.key";
certificate = "/config/certs/{{ .Env.XMPP_DOMAIN }}.crt";
}
modules_enabled = {
"bosh";
"pubsub";
"ping";
{{ if .Env.XMPP_MODULES }}
"{{ join "\";\n\"" (splitList "," .Env.XMPP_MODULES) }}";
{{ end }}
{{ if and $ENABLE_AUTH (eq $AUTH_TYPE "ldap") }}
"auth_cyrus";
{{end}}
}
c2s_require_encryption = false
{{ if and $ENABLE_AUTH (.Env.ENABLE_GUESTS | default "0" | toBool) }}
VirtualHost "{{ .Env.XMPP_GUEST_DOMAIN }}"
authentication = "anonymous"
c2s_require_encryption = false
{{ end }}
VirtualHost "{{ .Env.XMPP_AUTH_DOMAIN }}"
ssl = {
key = "/config/certs/{{ .Env.XMPP_AUTH_DOMAIN }}.key";
certificate = "/config/certs/{{ .Env.XMPP_AUTH_DOMAIN }}.crt";
}
authentication = "internal_plain"
{{ if .Env.XMPP_RECORDER_DOMAIN }}
VirtualHost "{{ .Env.XMPP_RECORDER_DOMAIN }}"
modules_enabled = {
"ping";
}
authentication = "internal_plain"
{{ end }}
Component "{{ .Env.XMPP_INTERNAL_MUC_DOMAIN }}" "muc"
modules_enabled = {
"ping";
{{ if .Env.XMPP_INTERNAL_MUC_MODULES }}
"{{ join "\";\n\"" (splitList "," .Env.XMPP_INTERNAL_MUC_MODULES) }}";
{{ end }}
}
storage = "memory"
muc_room_cache_size = 1000
Component "{{ .Env.XMPP_MUC_DOMAIN }}" "muc"
storage = "memory"
modules_enabled = {
{{ if .Env.XMPP_MUC_MODULES }}
"{{ join "\";\n\"" (splitList "," .Env.XMPP_MUC_MODULES) }}";
{{ end }}
{{ if eq $AUTH_TYPE "jwt" }}
"{{ $JWT_TOKEN_AUTH_MODULE }}";
{{ end }}
}
Component "focus.{{ .Env.XMPP_DOMAIN }}"
component_secret = "{{ .Env.JICOFO_COMPONENT_SECRET }}"

View File

@ -0,0 +1,162 @@
{{ $LOG_LEVEL := .Env.LOG_LEVEL | default "info" }}
-- Prosody Example Configuration File
--
-- Information on configuring Prosody can be found on our
-- website at http://prosody.im/doc/configure
--
-- Tip: You can check that the syntax of this file is correct
-- when you have finished by running: luac -p prosody.cfg.lua
-- If there are any errors, it will let you know what and where
-- they are, otherwise it will keep quiet.
--
-- The only thing left to do is rename this file to remove the .dist ending, and fill in the
-- blanks. Good luck, and happy Jabbering!
---------- Server-wide settings ----------
-- Settings in this section apply to the whole server and are the default settings
-- for any virtual hosts
-- This is a (by default, empty) list of accounts that are admins
-- for the server. Note that you must create the accounts separately
-- (see http://prosody.im/doc/creating_accounts for info)
-- Example: admins = { "user1@example.com", "user2@example.net" }
admins = { }
-- Enable use of libevent for better performance under high load
-- For more information see: http://prosody.im/doc/libevent
--use_libevent = true;
-- This is the list of modules Prosody will load on startup.
-- It looks for mod_modulename.lua in the plugins folder, so make sure that exists too.
-- Documentation on modules can be found at: http://prosody.im/doc/modules
modules_enabled = {
-- Generally required
"roster"; -- Allow users to have a roster. Recommended ;)
"saslauth"; -- Authentication for clients and servers. Recommended if you want to log in.
"tls"; -- Add support for secure TLS on c2s/s2s connections
"dialback"; -- s2s dialback support
"disco"; -- Service discovery
-- Not essential, but recommended
"private"; -- Private XML storage (for room bookmarks, etc.)
"vcard"; -- Allow users to set vCards
-- These are commented by default as they have a performance impact
--"privacy"; -- Support privacy lists
--"compression"; -- Stream compression (Debian: requires lua-zlib module to work)
-- Nice to have
"version"; -- Replies to server version requests
"uptime"; -- Report how long server has been running
"time"; -- Let others know the time here on this server
"ping"; -- Replies to XMPP pings with pongs
"pep"; -- Enables users to publish their mood, activity, playing music and more
"register"; -- Allow users to register on this server using a client and change passwords
-- Admin interfaces
"admin_adhoc"; -- Allows administration via an XMPP client that supports ad-hoc commands
--"admin_telnet"; -- Opens telnet console interface on localhost port 5582
-- HTTP modules
--"bosh"; -- Enable BOSH clients, aka "Jabber over HTTP"
--"http_files"; -- Serve static files from a directory over HTTP
-- Other specific functionality
"posix"; -- POSIX functionality, sends server to background, enables syslog, etc.
--"groups"; -- Shared roster support
--"announce"; -- Send announcement to all online users
--"welcome"; -- Welcome users who register accounts
--"watchregistrations"; -- Alert admins of registrations
--"motd"; -- Send a message to users when they log in
--"legacyauth"; -- Legacy authentication. Only used by some old clients and bots.
{{ if .Env.GLOBAL_MODULES }}
"{{ join "\";\n\"" (splitList "," .Env.GLOBAL_MODULES) }}";
{{ end }}
};
https_ports = { }
-- These modules are auto-loaded, but should you want
-- to disable them then uncomment them here:
modules_disabled = {
-- "offline"; -- Store offline messages
-- "c2s"; -- Handle client connections
-- "s2s"; -- Handle server-to-server connections
};
-- Disable account creation by default, for security
-- For more information see http://prosody.im/doc/creating_accounts
allow_registration = false;
daemonize = false;
pidfile = "/config/data/prosody.pid";
-- Force clients to use encrypted connections? This option will
-- prevent clients from authenticating unless they are using encryption.
c2s_require_encryption = false
-- Force certificate authentication for server-to-server connections?
-- This provides ideal security, but requires servers you communicate
-- with to support encryption AND present valid, trusted certificates.
-- NOTE: Your version of LuaSec must support certificate verification!
-- For more information see http://prosody.im/doc/s2s#security
s2s_secure_auth = false
-- Many servers don't support encryption or have invalid or self-signed
-- certificates. You can list domains here that will not be required to
-- authenticate using certificates. They will be authenticated using DNS.
--s2s_insecure_domains = { "gmail.com" }
-- Even if you leave s2s_secure_auth disabled, you can still require valid
-- certificates for some domains by specifying a list here.
--s2s_secure_domains = { "jabber.org" }
-- Select the authentication backend to use. The 'internal' providers
-- use Prosody's configured data storage to store the authentication data.
-- To allow Prosody to offer secure authentication mechanisms to clients, the
-- default provider stores passwords in plaintext. If you do not trust your
-- server please see http://prosody.im/doc/modules/mod_auth_internal_hashed
-- for information about using the hashed backend.
authentication = "internal_plain"
-- Select the storage backend to use. By default Prosody uses flat files
-- in its configured data directory, but it also supports more backends
-- through modules. An "sql" backend is included by default, but requires
-- additional dependencies. See http://prosody.im/doc/storage for more info.
--storage = "sql" -- Default is "internal" (Debian: "sql" requires one of the
-- lua-dbi-sqlite3, lua-dbi-mysql or lua-dbi-postgresql packages to work)
-- For the "sql" backend, you can uncomment *one* of the below to configure:
--sql = { driver = "SQLite3", database = "prosody.sqlite" } -- Default. 'database' is the filename.
--sql = { driver = "MySQL", database = "prosody", username = "prosody", password = "secret", host = "localhost" }
--sql = { driver = "PostgreSQL", database = "prosody", username = "prosody", password = "secret", host = "localhost" }
-- Logging configuration
-- For advanced logging see http://prosody.im/doc/logging
--
-- Debian:
-- Logs info and higher to /var/log
-- Logs errors to syslog also
log = {
{ levels = {min = "{{ $LOG_LEVEL }}"}, to = "console"};
}
{{ if .Env.GLOBAL_CONFIG }}
{{ join "\n" (splitList "\\n" .Env.GLOBAL_CONFIG) }}
{{ end }}
component_interface = { "*" }
data_path = "/config/data"
Include "conf.d/*.cfg.lua"

View File

@ -0,0 +1,26 @@
{{ if eq (.Env.AUTH_TYPE | default "internal") "ldap" }}
ldap_servers: {{ .Env.LDAP_URL }}
ldap_search_base: {{ .Env.LDAP_BASE }}
{{ if .Env.LDAP_BINDDN }}
ldap_bind_dn: {{ .Env.LDAP_BINDDN }}
ldap_bind_pw: {{ .Env.LDAP_BINDPW }}
{{ end }}
ldap_filter: {{ .Env.LDAP_FILTER | default "uid=%u" }}
ldap_version: {{ .Env.LDAP_VERSION | default "3" }}
ldap_auth_method: {{ .Env.LDAP_AUTH_METHOD | default "bind" }}
{{ if .Env.LDAP_USE_TLS | default "0" | toBool }}
ldap_tls_key: /config/certs/{{ .Env.XMPP_DOMAIN }}.key
ldap_tls_cert: /config/certs/{{ .Env.XMPP_DOMAIN }}.crt
{{ if .Env.LDAP_TLS_CHECK_PEER | default "0" | toBool }}
ldap_tls_check_peer: yes
ldap_tls_cacert_file: {{ .Env.LDAP_TLS_CACERT_FILE | default "/etc/ssl/certs/ca-certificates.crt" }}
ldap_tls_cacert_dir: {{ .Env.LDAP_TLS_CACERT_DIR | default "/etc/ssl/certs" }}
{{ end }}
{{ if .Env.LDAP_TLS_CIPHERS }}
ldap_tls_ciphers: {{ .Env.LDAP_TLS_CIPHERS }}
{{ end }}
{{ end }}
{{ end }}
{{ if .Env.LDAP_START_TLS | default "0" | toBool }}
ldap_start_tls: yes
{{ end }}

View File

@ -0,0 +1,67 @@
#!/usr/bin/with-contenv bash
if [[ ! -f /config/saslauthd.conf ]]; then
cp /defaults/saslauthd.conf /config/
fi
if [[ ! -f /etc/saslauthd.conf ]]; then
tpl /config/saslauthd.conf > /etc/saslauthd.conf
mkdir -pm777 /var/run/saslauthd
adduser prosody sasl
echo >> /etc/ldap/ldap.conf "TLS_REQCERT allow"
fi
PROSODY_CFG="/config/prosody.cfg.lua"
if [[ ! -d /config/data ]]; then
mkdir -pm 750 /config/data
fi
if [[ "$(stat -c %U /config)" != "prosody" ]]; then
chown -R prosody /config
fi
if [[ "$(stat -c %U /prosody-plugins)" != "prosody" ]]; then
chown -R prosody /prosody-plugins
fi
if [[ "$(stat -c %U /prosody-plugins-custom)" != "prosody" ]]; then
chown -R prosody /prosody-plugins-custom
fi
if [[ ! -f $PROSODY_CFG ]]; then
cp -r /defaults/* /config
tpl /defaults/prosody.cfg.lua > $PROSODY_CFG
tpl /defaults/conf.d/jitsi-meet.cfg.lua > /config/conf.d/jitsi-meet.cfg.lua
prosodyctl --config $PROSODY_CFG register $JICOFO_AUTH_USER $XMPP_AUTH_DOMAIN $JICOFO_AUTH_PASSWORD
prosodyctl --config $PROSODY_CFG register $JVB_AUTH_USER $XMPP_AUTH_DOMAIN $JVB_AUTH_PASSWORD
if [[ ! -z $JIBRI_XMPP_USER ]] && [[ ! -z $JIBRI_XMPP_PASSWORD ]]; then
prosodyctl --config $PROSODY_CFG register $JIBRI_XMPP_USER $XMPP_AUTH_DOMAIN $JIBRI_XMPP_PASSWORD
fi
if [[ ! -z $JIBRI_RECORDER_USER ]] && [[ ! -z $JIBRI_RECORDER_PASSWORD ]]; then
prosodyctl --config $PROSODY_CFG register $JIBRI_RECORDER_USER $XMPP_RECORDER_DOMAIN $JIBRI_RECORDER_PASSWORD
fi
if [[ ! -z $JIGASI_XMPP_USER ]] && [[ ! -z $JIGASI_XMPP_PASSWORD ]]; then
prosodyctl --config $PROSODY_CFG register $JIGASI_XMPP_USER $XMPP_AUTH_DOMAIN $JIGASI_XMPP_PASSWORD
fi
fi
mkdir -p /config/certs
if [[ ! -f /config/certs/$XMPP_DOMAIN.crt ]]; then
# echo for using all default values
echo | prosodyctl --config $PROSODY_CFG cert generate $XMPP_DOMAIN
fi
if [[ ! -f /config/certs/$XMPP_AUTH_DOMAIN.crt ]]; then
# echo for using all default values
echo | prosodyctl --config $PROSODY_CFG cert generate $XMPP_AUTH_DOMAIN
fi
# certs will be created in /config/data
mv /config/data/*.{crt,key} /config/certs/ || true
rm -f /config/data/*.cnf

View File

@ -0,0 +1,2 @@
pwcheck_method: saslauthd
mech_list: PLAIN

View File

@ -0,0 +1,2 @@
#!/usr/bin/with-contenv bash
exec s6-setuidgid root saslauthd -a ldap -O /etc/saslauthd.conf -c -m /var/run/saslauthd -n 5 -d

View File

@ -0,0 +1,3 @@
#!/usr/bin/with-contenv bash
exec s6-setuidgid prosody prosody --config /config/prosody.cfg.lua

View File

@ -0,0 +1,481 @@
/* eslint-disable no-unused-vars, no-var */
var config = {
// Configuration
//
// Alternative location for the configuration.
// configLocation: './config.json',
// Custom function which given the URL path should return a room name.
// getroomnode: function (path) { return 'someprefixpossiblybasedonpath'; },
// Connection
//
hosts: {
// XMPP domain.
domain: 'jitsi-meet.example.com',
// When using authentication, domain for guest users.
// anonymousdomain: 'guest.example.com',
// Domain for authenticated users. Defaults to <domain>.
// authdomain: 'jitsi-meet.example.com',
// Jirecon recording component domain.
// jirecon: 'jirecon.jitsi-meet.example.com',
// Call control component (Jigasi).
// call_control: 'callcontrol.jitsi-meet.example.com',
// Focus component domain. Defaults to focus.<domain>.
// focus: 'focus.jitsi-meet.example.com',
// XMPP MUC domain. FIXME: use XEP-0030 to discover it.
muc: 'conference.jitsi-meet.example.com'
},
// BOSH URL. FIXME: use XEP-0156 to discover it.
bosh: '//jitsi-meet.example.com/http-bind',
// The name of client node advertised in XEP-0115 'c' stanza
clientNode: 'http://jitsi.org/jitsimeet',
// The real JID of focus participant - can be overridden here
// focusUserJid: 'focus@auth.jitsi-meet.example.com',
// Testing / experimental features.
//
testing: {
// Enables experimental simulcast support on Firefox.
enableFirefoxSimulcast: false,
// P2P test mode disables automatic switching to P2P when there are 2
// participants in the conference.
p2pTestMode: false
// Enables the test specific features consumed by jitsi-meet-torture
// testMode: false
},
// Disables ICE/UDP by filtering out local and remote UDP candidates in
// signalling.
// webrtcIceUdpDisable: false,
// Disables ICE/TCP by filtering out local and remote TCP candidates in
// signalling.
// webrtcIceTcpDisable: false,
// Media
//
// Audio
// Disable measuring of audio levels.
// disableAudioLevels: false,
// Start the conference in audio only mode (no video is being received nor
// sent).
// startAudioOnly: false,
// Every participant after the Nth will start audio muted.
// startAudioMuted: 10,
// Start calls with audio muted. Unlike the option above, this one is only
// applied locally. FIXME: having these 2 options is confusing.
// startWithAudioMuted: false,
// Enabling it (with #params) will disable local audio output of remote
// participants and to enable it back a reload is needed.
// startSilent: false
// Video
// Sets the preferred resolution (height) for local video. Defaults to 720.
// resolution: 720,
// w3c spec-compliant video constraints to use for video capture. Currently
// used by browsers that return true from lib-jitsi-meet's
// util#browser#usesNewGumFlow. The constraints are independency from
// this config's resolution value. Defaults to requesting an ideal aspect
// ratio of 16:9 with an ideal resolution of 720.
// constraints: {
// video: {
// aspectRatio: 16 / 9,
// height: {
// ideal: 720,
// max: 720,
// min: 240
// }
// }
// },
// Enable / disable simulcast support.
// disableSimulcast: false,
// Enable / disable layer suspension. If enabled, endpoints whose HD
// layers are not in use will be suspended (no longer sent) until they
// are requested again.
// enableLayerSuspension: false,
// Suspend sending video if bandwidth estimation is too low. This may cause
// problems with audio playback. Disabled until these are fixed.
disableSuspendVideo: true,
// Every participant after the Nth will start video muted.
// startVideoMuted: 10,
// Start calls with video muted. Unlike the option above, this one is only
// applied locally. FIXME: having these 2 options is confusing.
// startWithVideoMuted: false,
// If set to true, prefer to use the H.264 video codec (if supported).
// Note that it's not recommended to do this because simulcast is not
// supported when using H.264. For 1-to-1 calls this setting is enabled by
// default and can be toggled in the p2p section.
// preferH264: true,
// If set to true, disable H.264 video codec by stripping it out of the
// SDP.
// disableH264: false,
// Desktop sharing
// The ID of the jidesha extension for Chrome.
desktopSharingChromeExtId: null,
// Whether desktop sharing should be disabled on Chrome.
// desktopSharingChromeDisabled: false,
// The media sources to use when using screen sharing with the Chrome
// extension.
desktopSharingChromeSources: [ 'screen', 'window', 'tab' ],
// Required version of Chrome extension
desktopSharingChromeMinExtVersion: '0.1',
// Whether desktop sharing should be disabled on Firefox.
// desktopSharingFirefoxDisabled: false,
// Optional desktop sharing frame rate options. Default value: min:5, max:5.
// desktopSharingFrameRate: {
// min: 5,
// max: 5
// },
// Try to start calls with screen-sharing instead of camera video.
// startScreenSharing: false,
// Recording
// Whether to enable file recording or not.
// fileRecordingsEnabled: false,
// Enable the dropbox integration.
// dropbox: {
// appKey: '<APP_KEY>' // Specify your app key here.
// // A URL to redirect the user to, after authenticating
// // by default uses:
// // 'https://jitsi-meet.example.com/static/oauth.html'
// redirectURI:
// 'https://jitsi-meet.example.com/subfolder/static/oauth.html'
// },
// When integrations like dropbox are enabled only that will be shown,
// by enabling fileRecordingsServiceEnabled, we show both the integrations
// and the generic recording service (its configuration and storage type
// depends on jibri configuration)
// fileRecordingsServiceEnabled: false,
// Whether to show the possibility to share file recording with other people
// (e.g. meeting participants), based on the actual implementation
// on the backend.
// fileRecordingsServiceSharingEnabled: false,
// Whether to enable live streaming or not.
// liveStreamingEnabled: false,
// Transcription (in interface_config,
// subtitles and buttons can be configured)
// transcribingEnabled: false,
// Misc
// Default value for the channel "last N" attribute. -1 for unlimited.
channelLastN: -1,
// Disables or enables RTX (RFC 4588) (defaults to false).
// disableRtx: false,
// Disables or enables TCC (the default is in Jicofo and set to true)
// (draft-holmer-rmcat-transport-wide-cc-extensions-01). This setting
// affects congestion control, it practically enables send-side bandwidth
// estimations.
// enableTcc: true,
// Disables or enables REMB (the default is in Jicofo and set to false)
// (draft-alvestrand-rmcat-remb-03). This setting affects congestion
// control, it practically enables recv-side bandwidth estimations. When
// both TCC and REMB are enabled, TCC takes precedence. When both are
// disabled, then bandwidth estimations are disabled.
// enableRemb: false,
// Defines the minimum number of participants to start a call (the default
// is set in Jicofo and set to 2).
// minParticipants: 2,
// Use XEP-0215 to fetch STUN and TURN servers.
// useStunTurn: true,
// Enable IPv6 support.
// useIPv6: true,
// Enables / disables a data communication channel with the Videobridge.
// Values can be 'datachannel', 'websocket', true (treat it as
// 'datachannel'), undefined (treat it as 'datachannel') and false (don't
// open any channel).
// openBridgeChannel: true,
// UI
//
// Use display name as XMPP nickname.
// useNicks: false,
// Require users to always specify a display name.
// requireDisplayName: true,
// Whether to use a welcome page or not. In case it's false a random room
// will be joined when no room is specified.
enableWelcomePage: true,
// Enabling the close page will ignore the welcome page redirection when
// a call is hangup.
// enableClosePage: false,
// Disable hiding of remote thumbnails when in a 1-on-1 conference call.
// disable1On1Mode: false,
// Default language for the user interface.
// defaultLanguage: 'en',
// If true all users without a token will be considered guests and all users
// with token will be considered non-guests. Only guests will be allowed to
// edit their profile.
enableUserRolesBasedOnToken: false,
// Whether or not some features are checked based on token.
// enableFeaturesBasedOnToken: false,
// Enable lock room for all moderators, even when userRolesBasedOnToken is enabled and participants are guests.
// lockRoomGuestEnabled: false,
// When enabled the password used for locking a room is restricted to up to the number of digits specified
// roomPasswordNumberOfDigits: 10,
// default: roomPasswordNumberOfDigits: false,
// Message to show the users. Example: 'The service will be down for
// maintenance at 01:00 AM GMT,
// noticeMessage: '',
// Enables calendar integration, depends on googleApiApplicationClientID
// and microsoftApiApplicationClientID
// enableCalendarIntegration: false,
// Stats
//
// Whether to enable stats collection or not in the TraceablePeerConnection.
// This can be useful for debugging purposes (post-processing/analysis of
// the webrtc stats) as it is done in the jitsi-meet-torture bandwidth
// estimation tests.
// gatherStats: false,
// To enable sending statistics to callstats.io you must provide the
// Application ID and Secret.
// callStatsID: '',
// callStatsSecret: '',
// enables callstatsUsername to be reported as statsId and used
// by callstats as repoted remote id
// enableStatsID: false
// enables sending participants display name to callstats
// enableDisplayNameInStats: false
// Privacy
//
// If third party requests are disabled, no other server will be contacted.
// This means avatars will be locally generated and callstats integration
// will not function.
// disableThirdPartyRequests: false,
// Peer-To-Peer mode: used (if enabled) when there are just 2 participants.
//
p2p: {
// Enables peer to peer mode. When enabled the system will try to
// establish a direct connection when there are exactly 2 participants
// in the room. If that succeeds the conference will stop sending data
// through the JVB and use the peer to peer connection instead. When a
// 3rd participant joins the conference will be moved back to the JVB
// connection.
enabled: true,
// Use XEP-0215 to fetch STUN and TURN servers.
// useStunTurn: true,
// The STUN servers that will be used in the peer to peer connections
stunServers: [
{ urls: 'stun:stun.l.google.com:19302' },
{ urls: 'stun:stun1.l.google.com:19302' },
{ urls: 'stun:stun2.l.google.com:19302' }
],
// Sets the ICE transport policy for the p2p connection. At the time
// of this writing the list of possible values are 'all' and 'relay',
// but that is subject to change in the future. The enum is defined in
// the WebRTC standard:
// https://www.w3.org/TR/webrtc/#rtcicetransportpolicy-enum.
// If not set, the effective value is 'all'.
// iceTransportPolicy: 'all',
// If set to true, it will prefer to use H.264 for P2P calls (if H.264
// is supported).
preferH264: true
// If set to true, disable H.264 video codec by stripping it out of the
// SDP.
// disableH264: false,
// How long we're going to wait, before going back to P2P after the 3rd
// participant has left the conference (to filter out page reload).
// backToP2PDelay: 5
},
analytics: {
// The Google Analytics Tracking ID:
// googleAnalyticsTrackingId: 'your-tracking-id-UA-123456-1'
// The Amplitude APP Key:
// amplitudeAPPKey: '<APP_KEY>'
// Array of script URLs to load as lib-jitsi-meet "analytics handlers".
// scriptURLs: [
// "libs/analytics-ga.min.js", // google-analytics
// "https://example.com/my-custom-analytics.js"
// ],
},
// Information about the jitsi-meet instance we are connecting to, including
// the user region as seen by the server.
deploymentInfo: {
// shard: "shard1",
// region: "europe",
// userRegion: "asia"
}
// Local Recording
//
// localRecording: {
// Enables local recording.
// Additionally, 'localrecording' (all lowercase) needs to be added to
// TOOLBAR_BUTTONS in interface_config.js for the Local Recording
// button to show up on the toolbar.
//
// enabled: true,
//
// The recording format, can be one of 'ogg', 'flac' or 'wav'.
// format: 'flac'
//
// }
// Options related to end-to-end (participant to participant) ping.
// e2eping: {
// // The interval in milliseconds at which pings will be sent.
// // Defaults to 10000, set to <= 0 to disable.
// pingInterval: 10000,
//
// // The interval in milliseconds at which analytics events
// // with the measured RTT will be sent. Defaults to 60000, set
// // to <= 0 to disable.
// analyticsInterval: 60000,
// }
// If set, will attempt to use the provided video input device label when
// triggering a screenshare, instead of proceeding through the normal flow
// for obtaining a desktop stream.
// NOTE: This option is experimental and is currently intended for internal
// use only.
// _desktopSharingSourceDevice: 'sample-id-or-label'
// If true, any checks to handoff to another application will be prevented
// and instead the app will continue to display in the current browser.
// disableDeepLinking: false
// A property to disable the right click context menu for localVideo
// the menu has option to flip the locally seen video for local presentations
// disableLocalVideoFlip: false
// List of undocumented settings used in jitsi-meet
/**
_immediateReloadThreshold
autoRecord
autoRecordToken
debug
debugAudioLevels
deploymentInfo
dialInConfCodeUrl
dialInNumbersUrl
dialOutAuthUrl
dialOutCodesUrl
disableRemoteControl
displayJids
etherpad_base
externalConnectUrl
firefox_fake_device
googleApiApplicationClientID
iAmRecorder
iAmSipGateway
microsoftApiApplicationClientID
peopleSearchQueryTypes
peopleSearchUrl
requireDisplayName
tokenAuthUrl
*/
// List of undocumented settings used in lib-jitsi-meet
/**
_peerConnStatusOutOfLastNTimeout
_peerConnStatusRtcMuteTimeout
abTesting
avgRtpStatsN
callStatsConfIDNamespace
callStatsCustomScriptUrl
desktopSharingSources
disableAEC
disableAGC
disableAP
disableHPF
disableNS
enableLipSync
enableTalkWhileMuted
forceJVB121Ratio
hiddenDomain
ignoreStartMuted
nick
startBitrate
*/
};
/* eslint-enable no-unused-vars, no-var */

View File

@ -0,0 +1,18 @@
server {
listen 80 default_server;
{{ if .Env.ENABLE_HTTP_REDIRECT | default "0" | toBool }}
return 301 https://$host$request_uri;
{{ else }}
include /config/nginx/meet.conf;
{{ end }}
}
{{ if not (.Env.DISABLE_HTTPS | default "0" | toBool) }}
server {
listen 443 ssl;
include /config/nginx/ssl.conf;
include /config/nginx/meet.conf;
}
{{ end }}

View File

@ -0,0 +1,226 @@
/* eslint-disable no-unused-vars, no-var, max-len */
var interfaceConfig = {
// TO FIX: this needs to be handled from SASS variables. There are some
// methods allowing to use variables both in css and js.
DEFAULT_BACKGROUND: '#474747',
/**
* Whether or not the blurred video background for large video should be
* displayed on browsers that can support it.
*/
DISABLE_VIDEO_BACKGROUND: false,
INITIAL_TOOLBAR_TIMEOUT: 20000,
TOOLBAR_TIMEOUT: 4000,
TOOLBAR_ALWAYS_VISIBLE: false,
DEFAULT_REMOTE_DISPLAY_NAME: 'Fellow Jitster',
DEFAULT_LOCAL_DISPLAY_NAME: 'me',
SHOW_JITSI_WATERMARK: true,
JITSI_WATERMARK_LINK: 'https://jitsi.org',
// if watermark is disabled by default, it can be shown only for guests
SHOW_WATERMARK_FOR_GUESTS: true,
SHOW_BRAND_WATERMARK: false,
BRAND_WATERMARK_LINK: '',
SHOW_POWERED_BY: false,
SHOW_DEEP_LINKING_IMAGE: false,
GENERATE_ROOMNAMES_ON_WELCOME_PAGE: true,
DISPLAY_WELCOME_PAGE_CONTENT: true,
APP_NAME: 'Jitsi Meet',
NATIVE_APP_NAME: 'Jitsi Meet',
PROVIDER_NAME: 'Jitsi',
LANG_DETECTION: false, // Allow i18n to detect the system language
INVITATION_POWERED_BY: true,
/**
* If we should show authentication block in profile
*/
AUTHENTICATION_ENABLE: true,
/**
* The name of the toolbar buttons to display in the toolbar. If present,
* the button will display. Exceptions are "livestreaming" and "recording"
* which also require being a moderator and some values in config.js to be
* enabled. Also, the "profile" button will not display for user's with a
* jwt.
*/
TOOLBAR_BUTTONS: [
'microphone', 'camera', 'closedcaptions', 'desktop', 'fullscreen',
'fodeviceselection', 'hangup', 'profile', 'info', 'chat', 'recording',
'livestreaming', 'etherpad', 'sharedvideo', 'settings', 'raisehand',
'videoquality', 'filmstrip', 'invite', 'feedback', 'stats', 'shortcuts',
'tileview', 'videobackgroundblur'
],
SETTINGS_SECTIONS: [ 'devices', 'language', 'moderator', 'profile', 'calendar' ],
// Determines how the video would fit the screen. 'both' would fit the whole
// screen, 'height' would fit the original video height to the height of the
// screen, 'width' would fit the original video width to the width of the
// screen respecting ratio.
VIDEO_LAYOUT_FIT: 'both',
/**
* Whether to only show the filmstrip (and hide the toolbar).
*/
filmStripOnly: false,
/**
* Whether to show thumbnails in filmstrip as a column instead of as a row.
*/
VERTICAL_FILMSTRIP: true,
// A html text to be shown to guests on the close page, false disables it
CLOSE_PAGE_GUEST_HINT: false,
RANDOM_AVATAR_URL_PREFIX: false,
RANDOM_AVATAR_URL_SUFFIX: false,
FILM_STRIP_MAX_HEIGHT: 120,
// Enables feedback star animation.
ENABLE_FEEDBACK_ANIMATION: false,
DISABLE_FOCUS_INDICATOR: false,
DISABLE_DOMINANT_SPEAKER_INDICATOR: false,
/**
* Whether the speech to text transcription subtitles panel is disabled.
* If {@code undefined}, defaults to {@code false}.
*
* @type {boolean}
*/
DISABLE_TRANSCRIPTION_SUBTITLES: false,
/**
* Whether the ringing sound in the call/ring overlay is disabled. If
* {@code undefined}, defaults to {@code false}.
*
* @type {boolean}
*/
DISABLE_RINGING: false,
AUDIO_LEVEL_PRIMARY_COLOR: 'rgba(255,255,255,0.4)',
AUDIO_LEVEL_SECONDARY_COLOR: 'rgba(255,255,255,0.2)',
POLICY_LOGO: null,
LOCAL_THUMBNAIL_RATIO: 16 / 9, // 16:9
REMOTE_THUMBNAIL_RATIO: 1, // 1:1
// Documentation reference for the live streaming feature.
LIVE_STREAMING_HELP_LINK: 'https://jitsi.org/live',
/**
* Whether the mobile app Jitsi Meet is to be promoted to participants
* attempting to join a conference in a mobile Web browser. If
* {@code undefined}, defaults to {@code true}.
*
* @type {boolean}
*/
MOBILE_APP_PROMO: true,
/**
* Maximum coeficient of the ratio of the large video to the visible area
* after the large video is scaled to fit the window.
*
* @type {number}
*/
MAXIMUM_ZOOMING_COEFFICIENT: 1.3,
/*
* If indicated some of the error dialogs may point to the support URL for
* help.
*/
SUPPORT_URL: 'https://github.com/jitsi/jitsi-meet/issues/new',
/**
* Whether the connection indicator icon should hide itself based on
* connection strength. If true, the connection indicator will remain
* displayed while the participant has a weak connection and will hide
* itself after the CONNECTION_INDICATOR_HIDE_TIMEOUT when the connection is
* strong.
*
* @type {boolean}
*/
CONNECTION_INDICATOR_AUTO_HIDE_ENABLED: true,
/**
* How long the connection indicator should remain displayed before hiding.
* Used in conjunction with CONNECTION_INDICATOR_AUTOHIDE_ENABLED.
*
* @type {number}
*/
CONNECTION_INDICATOR_AUTO_HIDE_TIMEOUT: 5000,
/**
* If true, hides the connection indicators completely.
*
* @type {boolean}
*/
CONNECTION_INDICATOR_DISABLED: false,
/**
* If true, hides the video quality label indicating the resolution status
* of the current large video.
*
* @type {boolean}
*/
VIDEO_QUALITY_LABEL_DISABLED: false,
/**
* If true, will display recent list
*
* @type {boolean}
*/
RECENT_LIST_ENABLED: true,
// Names of browsers which should show a warning stating the current browser
// has a suboptimal experience. Browsers which are not listed as optimal or
// unsupported are considered suboptimal. Valid values are:
// chrome, chromium, edge, electron, firefox, nwjs, opera, safari
OPTIMAL_BROWSERS: [ 'chrome', 'chromium', 'firefox', 'nwjs', 'electron' ],
// Browsers, in addition to those which do not fully support WebRTC, that
// are not supported and should show the unsupported browser page.
UNSUPPORTED_BROWSERS: [],
/**
* A UX mode where the last screen share participant is automatically
* pinned. Valid values are the string "remote-only" so remote participants
* get pinned but not local, otherwise any truthy value for all participants,
* and any falsy value to disable the feature.
*
* Note: this mode is experimental and subject to breakage.
*/
AUTO_PIN_LATEST_SCREEN_SHARE: 'remote-only'
/**
* How many columns the tile view can expand to. The respected range is
* between 1 and 5.
*/
// TILE_VIEW_MAX_COLUMNS: 5,
/**
* Specify custom URL for downloading android mobile app.
*/
// MOBILE_DOWNLOAD_LINK_ANDROID: 'https://play.google.com/store/apps/details?id=org.jitsi.meet',
/**
* Specify URL for downloading ios mobile app.
*/
// MOBILE_DOWNLOAD_LINK_IOS: 'https://itunes.apple.com/us/app/jitsi-meet/id1165103905',
/**
* Specify mobile app scheme for opening the app from the mobile browser.
*/
// APP_SCHEME: 'org.jitsi.meet',
/**
* Specify the Android app package name.
*/
// ANDROID_APP_PACKAGE: 'org.jitsi.meet',
/**
* Override the behavior of some notifications to remain displayed until
* explicitly dismissed through a user action. The value is how long, in
* milliseconds, those notifications should remain displayed.
*/
// ENFORCE_NOTIFICATION_AUTO_DISMISS_TIMEOUT: 15000,
};
/* eslint-enable no-unused-vars, no-var, max-len */

View File

@ -0,0 +1,10 @@
#!/bin/bash
# stop nginx
s6-svc -d /var/run/s6/services/nginx
# renew cert
certbot -n renew >> /config/le-renew.log
# start nginx
s6-svc -u /var/run/s6/services/nginx

View File

@ -0,0 +1,50 @@
server_name _;
client_max_body_size 0;
root /usr/share/jitsi-meet;
index index.html
error_page 404 /static/404.html;
location ~ ^/([a-zA-Z0-9=\?]+)$ {
rewrite ^/(.*)$ / break;
}
location /config.js {
alias /config/config.js;
}
location /interface_config.js {
alias /config/interface_config.js;
}
location /external_api.js {
alias /usr/share/jitsi-meet/libs/external_api.min.js;
}
location / {
ssi on;
}
# BOSH
location /http-bind {
proxy_pass {{ .Env.XMPP_BOSH_URL_BASE }}/http-bind;
proxy_set_header X-Forwarded-For $remote_addr;
proxy_set_header Host {{ .Env.XMPP_DOMAIN }};
}
{{ if .Env.ETHERPAD_URL_BASE }}
# Etherpad-lite
location /etherpad/ {
proxy_http_version 1.1;
proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection 'upgrade';
proxy_set_header Host $host;
proxy_cache_bypass $http_upgrade;
proxy_pass {{ .Env.ETHERPAD_URL_BASE }}/;
proxy_set_header X-Forwarded-For $remote_addr;
proxy_buffering off;
proxy_set_header Host {{ .Env.XMPP_DOMAIN }};
}
{{ end }}

View File

@ -0,0 +1,60 @@
user www-data;
worker_processes 4;
pid /run/nginx.pid;
include /etc/nginx/modules-enabled/*.conf;
events {
worker_connections 768;
# multi_accept on;
}
http {
##
# Basic Settings
##
sendfile on;
tcp_nopush on;
tcp_nodelay on;
keepalive_timeout 65;
types_hash_max_size 2048;
# server_tokens off;
# server_names_hash_bucket_size 64;
# server_name_in_redirect off;
client_max_body_size 0;
include /etc/nginx/mime.types;
default_type application/octet-stream;
##
# Logging Settings
##
access_log /dev/stdout;
error_log /dev/stderr;
##
# Gzip Settings
##
gzip on;
gzip_disable "msie6";
# gzip_vary on;
# gzip_proxied any;
# gzip_comp_level 6;
# gzip_buffers 16 8k;
# gzip_http_version 1.1;
# gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript;
##
# Virtual Host Configs
##
include /config/nginx/site-confs/*;
}
daemon off;

View File

@ -0,0 +1,27 @@
# session settings
ssl_session_timeout 1d;
ssl_session_cache shared:SSL:50m;
ssl_session_tickets off;
# Diffie-Hellman parameter for DHE cipher suites
ssl_dhparam /config/nginx/dhparams.pem;
# ssl certs
{{ if .Env.ENABLE_LETSENCRYPT | default "0" | toBool }}
ssl_certificate /etc/letsencrypt/live/{{ .Env.LETSENCRYPT_DOMAIN }}/fullchain.pem;
ssl_certificate_key /etc/letsencrypt/live/{{ .Env.LETSENCRYPT_DOMAIN }}/privkey.pem;
{{ else }}
ssl_certificate /config/keys/cert.crt;
ssl_certificate_key /config/keys/cert.key;
{{ end }}
# protocols
ssl_protocols TLSv1.2;
ssl_prefer_server_ciphers on;
ssl_ecdh_curve secp384r1;
ssl_ciphers ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDH+CHACHA20:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!3DES:!MD5:!PSK;
# headers
add_header Strict-Transport-Security "max-age=63072000; includeSubDomains; preload";
add_header X-Content-Type-Options nosniff;
add_header X-XSS-Protection "1; mode=block";

View File

@ -0,0 +1,118 @@
#!/usr/bin/with-contenv bash
# make our folders
mkdir -p \
/config/{nginx/site-confs,keys} \
/run \
/var/lib/nginx/tmp/client_body \
/var/tmp/nginx
# generate keys (maybe)
if [[ $DISABLE_HTTPS -ne 1 ]]; then
if [[ $ENABLE_LETSENCRYPT -eq 1 ]]; then
if [[ ! -f /etc/letsencrypt/live/$LETSENCRYPT_DOMAIN/fullchain.pem ]]; then
certbot certonly \
--noninteractive \
--standalone \
--preferred-challenges http \
-d $LETSENCRYPT_DOMAIN \
--agree-tos \
--email $LETSENCRYPT_EMAIL
fi
# remove default certbot renewal
if [[ -f /etc/cron.d/certbot ]]; then
rm /etc/cron.d/certbot
fi
# setup certbot renewal script
if [[ ! -f /etc/cron.daily/letencrypt-renew ]]; then
cp /defaults/letsencrypt-renew /etc/cron.daily/
fi
else
# use self-signed certs
if [[ -f /config/keys/cert.key && -f /config/keys/cert.crt ]]; then
echo "using keys found in /config/keys"
else
echo "generating self-signed keys in /config/keys, you can replace these with your own keys if required"
SUBJECT="/C=US/ST=TX/L=Austin/O=jitsi.org/OU=Jitsi Server/CN=*"
openssl req -new -x509 -days 3650 -nodes -out /config/keys/cert.crt -keyout /config/keys/cert.key -subj "$SUBJECT"
fi
fi
if [[ ! -f /config/nginx/dhparams.pem ]]; then
openssl dhparam -out /config/nginx/dhparams.pem 2048
fi
fi
# copy config files
if [[ ! -f /config/nginx/nginx.conf ]]; then
cp /defaults/nginx.conf /config/nginx/nginx.conf
fi
if [[ ! -f /config/nginx/meet.conf ]]; then
tpl /defaults/meet.conf > /config/nginx/meet.conf
fi
if [[ ! -f /config/nginx/ssl.conf ]]; then
tpl /defaults/ssl.conf > /config/nginx/ssl.conf
fi
if [[ ! -f /config/nginx/site-confs/default ]]; then
tpl /defaults/default > /config/nginx/site-confs/default
fi
if [[ ! -f /config/config.js ]]; then
cp /defaults/config.js /config/config.js
sed -i \
-e "s#jitsi-meet.example.com#$XMPP_DOMAIN#g" \
-e "s#bosh:.*#bosh: '/http-bind',#" \
-e "s#muc:.*#muc: '${XMPP_MUC_DOMAIN}',#" \
-e "s#// focusUserJid:.*#focusUserJid: '${JICOFO_AUTH_USER}@${XMPP_AUTH_DOMAIN}',#" \
/config/config.js
if [[ $ENABLE_RECORDING -eq 1 || x$ENABLE_RECORDING == xtrue ]]; then
sed -i \
-e "/\/\/ Recording.*/a hiddenDomain: '$XMPP_RECORDER_DOMAIN'," \
-e "s#// fileRecordingsEnabled:.*#fileRecordingsEnabled: true,#" \
-e "s#// liveStreamingEnabled:.*#liveStreamingEnabled: true,#" \
/config/config.js
fi
if [[ $ENABLE_AUTH -eq 1 ]]; then
if [[ $ENABLE_GUESTS -eq 1 ]]; then
sed -i \
-e "s#// anonymousdomain:.*#anonymousdomain: '${XMPP_GUEST_DOMAIN}',#" \
/config/config.js
fi
sed -i \
-e "s#// authdomain:.*#authdomain: '${XMPP_DOMAIN}',#" \
/config/config.js
fi
if [[ ! -z "${ETHERPAD_URL_BASE}" && -z "$(grep -om1 'etherpad_base:' /config/config.js)" ]]; then
sed -i \
-e "/enableWelcomePage/a\ etherpad_base: '/etherpad/p/'," \
/config/config.js
fi
if [[ $ENABLE_TRANSCRIPTIONS -eq 1 || "$ENABLE_TRANSCRIPTIONS" == "true" ]]; then
sed -i \
-e "s#// transcribingEnabled:.*#transcribingEnabled: true,#" \
/config/config.js
fi
fi
if [[ ! -f /config/interface_config.js ]]; then
cp /defaults/interface_config.js /config/interface_config.js
# It will remove parameter 'closedcaptions' from TOOLBAR_BUTTONS if ENABLE_TRANSCRIPTIONS is false,
# because it enabled by default, but not supported out of the box.
if [[ $ENABLE_TRANSCRIPTIONS -ne 1 || "$ENABLE_TRANSCRIPTIONS" != "true" ]]; then
sed -i \
-e "s#'closedcaptions', ##" \
/config/interface_config.js
fi
fi

View File

@ -0,0 +1,7 @@
#!/usr/bin/with-contenv bash
if [[ $DISABLE_HTTPS -ne 1 ]]; then
if [[ $ENABLE_LETSENCRYPT -eq 1 ]]; then
exec cron -f
fi
fi

View File

@ -0,0 +1,3 @@
#!/usr/bin/with-contenv bash
exec nginx -c /config/nginx/nginx.conf